summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--[-rwxr-xr-x]arch/arm/boot/dts/am335x-osd3358-sm-red.dts0
-rw-r--r--arch/arm/boot/dts/am4372.dtsi1
-rw-r--r--arch/arm/boot/dts/imx23-evk.dts90
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts183
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi12
-rw-r--r--arch/arm/boot/dts/omap4-droid4-xt894.dts20
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/configs/mxs_defconfig1
-rw-r--r--arch/arm/configs/versatile_defconfig14
-rw-r--r--arch/arm/mach-at91/pm.c9
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S12
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c161
-rw-r--r--arch/arm/mach-omap1/include/mach/board-ams-delta.h7
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c125
-rw-r--r--arch/arm/mach-u300/Kconfig13
-rw-r--r--arch/arm/mach-u300/Makefile1
-rw-r--r--arch/arm/mach-u300/dummyspichip.c276
-rw-r--r--arch/arm/mach-zynq/slcr.c2
19 files changed, 340 insertions, 589 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e8cd55a5b04c..b8c6062ca0c1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -701,6 +701,7 @@ config ARCH_VIRT
select ARM_GIC_V3_ITS if PCI
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
+ select ARCH_SUPPORTS_BIG_ENDIAN
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 4d969013f99a..4d969013f99a 100755..100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index f0cbd86312dc..d4b7c59eec68 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -469,6 +469,7 @@
ti,hwmods = "rtc";
clocks = <&clk_32768_ck>;
clock-names = "int-clk";
+ system-power-controller;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 9fb47724b9c1..ad2ae25b7b4d 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -13,6 +13,43 @@
reg = <0x40000000 0x08000000>;
};
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 18 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <&reg_lcd_3v3>;
+ avdd-supply = <&reg_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@@ -52,31 +89,11 @@
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
- lcd-supply = <&reg_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <15>;
- hfront-porch = <8>;
- vback-porch = <12>;
- vfront-porch = <4>;
- hsync-len = <1>;
- vsync-len = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -118,32 +135,7 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_vddio_sd0: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 0>;
- };
-
- reg_lcd_3v3: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 18 0>;
- enable-active-high;
- };
- };
-
- backlight {
+ backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 6b0ae667640f..93ab5bdfe068 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -13,6 +13,87 @@
reg = <0x40000000 0x08000000>;
};
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_fec_3v3: regulator-fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 15 0>;
+ };
+
+ reg_usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 8 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 0>;
+ enable-active-high;
+ };
+
+ reg_can_3v3: regulator-can-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 13 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <&reg_lcd_3v3>;
+ avdd-supply = <&reg_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@@ -116,31 +197,11 @@
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
- lcd-supply = <&reg_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -269,80 +330,6 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vddio_sd0: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
- };
-
- reg_fec_3v3: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "fec-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 15 0>;
- };
-
- reg_usb0_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 9 0>;
- enable-active-high;
- };
-
- reg_usb1_vbus: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 8 0>;
- enable-active-high;
- };
-
- reg_lcd_3v3: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 0>;
- enable-active-high;
- };
-
- reg_can_3v3: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "can-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 13 0>;
- enable-active-high;
- };
-
- };
-
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
@@ -363,7 +350,7 @@
};
};
- backlight {
+ backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ffa4b3a..7234e8330a57 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -126,10 +126,14 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ /*
+ * Reference manual lists pci irqs incorrectly
+ * Real hardware ordering is same as imx6: D+MSI, C, B, A
+ */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 12d6822f0057..04758a2a87f0 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -354,7 +354,7 @@
&mmc2 {
vmmc-supply = <&vsdio>;
bus-width = <8>;
- non-removable;
+ ti,non-removable;
};
&mmc3 {
@@ -621,15 +621,6 @@
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-};
-
-&omap4_pmx_wkup {
- usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
- /* gpio_wk0 */
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
- >;
- };
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
@@ -644,6 +635,15 @@
};
};
+&omap4_pmx_wkup {
+ usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+ /* gpio_wk0 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index e2c127608bcc..7eca43ff69bb 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -257,6 +257,7 @@ CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 148226e36152..7b8212857535 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -95,6 +95,7 @@ CONFIG_MFD_MXS_LRADC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index df68dc4056e5..5282324c7cef 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -5,19 +5,19 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -59,6 +59,7 @@ CONFIG_GPIO_PL061=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -89,9 +90,10 @@ CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 32fae4dbd63b..51e808adb00c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -143,15 +143,15 @@ static int at91_pm_config_ws(unsigned int pm_mode, bool set)
/* Check if enabled on SHDWC. */
if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
- goto put_node;
+ goto put_device;
mode |= wsi->pmc_fsmr_bit;
if (wsi->set_polarity)
polarity |= wsi->pmc_fsmr_bit;
}
-put_node:
- of_node_put(np);
+put_device:
+ put_device(&pdev->dev);
}
if (mode) {
@@ -580,8 +580,6 @@ static int __init at91_pm_backup_init(void)
if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
return 0;
- pm_bu = NULL;
-
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
if (!np) {
pr_warn("%s: failed to find sfrbu!\n", __func__);
@@ -590,7 +588,6 @@ static int __init at91_pm_backup_init(void)
pm_data.sfrbu = of_iomap(np, 0);
of_node_put(np);
- pm_bu = NULL;
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
if (!np)
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index ddc27638ba2a..e3faa0274b56 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,6 +15,7 @@
#include <linux/linkage.h>
#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/assembler.h>
#include <mach/board-ams-delta.h>
@@ -24,17 +25,10 @@
#include "soc.h"
/*
- * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
- * Unfortunately, those were not placed in a separate header file.
+ * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
+ * Unfortunately, it was not placed in a separate header file.
*/
#define OMAP1510_GPIO_BASE 0xFFFCE000
-#define OMAP1510_GPIO_DATA_INPUT 0x00
-#define OMAP1510_GPIO_DATA_OUTPUT 0x04
-#define OMAP1510_GPIO_DIR_CONTROL 0x08
-#define OMAP1510_GPIO_INT_CONTROL 0x0c
-#define OMAP1510_GPIO_INT_MASK 0x10
-#define OMAP1510_GPIO_INT_STATUS 0x14
-#define OMAP1510_GPIO_PIN_CONTROL 0x18
/* GPIO register bitmasks */
#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index dd28d2614d7f..318925ae3ebe 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -250,39 +250,6 @@ static struct platform_device latch2_gpio_device = {
#define LATCH2_PIN_HOOKFLASH1 14
#define LATCH2_PIN_HOOKFLASH2 15
-static const struct gpio latch_gpios[] __initconst = {
- {
- .gpio = LATCH1_GPIO_BASE + 6,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "dockit1",
- },
- {
- .gpio = LATCH1_GPIO_BASE + 7,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "dockit2",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "scard_rstin",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "scard_cmdvcc",
- },
- {
- .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "hookflash1",
- },
- {
- .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "hookflash2",
- },
-};
-
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
REGULATOR_SUPPLY("POR", "cx20442-codec"),
@@ -321,20 +288,6 @@ struct modem_private_data {
static struct modem_private_data modem_priv;
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
-{
- int bit = 0;
- u16 bitpos = 1 << bit;
-
- for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
- if (!(mask & bitpos))
- continue;
- else
- gpio_set_value(base + bit, (value & bitpos) != 0);
- }
-}
-EXPORT_SYMBOL(ams_delta_latch_write);
-
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -630,6 +583,28 @@ static struct gpiod_hog ams_delta_gpio_hogs[] = {
{},
};
+static struct plat_serial8250_port ams_delta_modem_ports[];
+
+/*
+ * Obtain MODEM IRQ GPIO descriptor using its hardware pin
+ * number and assign related IRQ number to the MODEM port.
+ * Keep the GPIO descriptor open so nobody steps in.
+ */
+static void __init modem_assign_irq(struct gpio_chip *chip)
+{
+ struct gpio_desc *gpiod;
+
+ gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ,
+ "modem_irq");
+ if (IS_ERR(gpiod)) {
+ pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__,
+ PTR_ERR(gpiod));
+ } else {
+ gpiod_direction_input(gpiod);
+ ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod);
+ }
+}
+
/*
* The purpose of this function is to take care of proper initialization of
* devices and data structures which depend on GPIO lines provided by OMAP GPIO
@@ -649,7 +624,47 @@ static void __init omap_gpio_deps_init(void)
return;
}
+ /*
+ * Start with FIQ initialization as it may have to request
+ * and release successfully each OMAP GPIO pin in turn.
+ */
ams_delta_init_fiq(chip, &ams_delta_serio_device);
+
+ modem_assign_irq(chip);
+}
+
+/*
+ * Initialize latch2 pins with values which are safe for dependent on-board
+ * devices or useful for their successull initialization even before GPIO
+ * driver takes control over the latch pins:
+ * - LATCH2_PIN_LCD_VBLEN = 0
+ * - LATCH2_PIN_LCD_NDISP = 0 Keep LCD device powered off before its
+ * driver takes control over it.
+ * - LATCH2_PIN_NAND_NCE = 0
+ * - LATCH2_PIN_NAND_NWP = 0 Keep NAND device down and write-
+ * protected before its driver takes
+ * control over it.
+ * - LATCH2_PIN_KEYBRD_PWR = 0 Keep keyboard powered off before serio
+ * driver takes control over it.
+ * - LATCH2_PIN_KEYBRD_DATAOUT = 0 Keep low to avoid corruption of first
+ * byte of data received from attached
+ * keyboard when serio device is probed;
+ * the pin is also hogged low by the latch2
+ * GPIO driver as soon as it is ready.
+ * - LATCH2_PIN_MODEM_NRESET = 1 Enable voice MODEM device, allowing for
+ * its successful probe even before a
+ * regulator it depends on, which in turn
+ * takes control over the pin, is set up.
+ * - LATCH2_PIN_MODEM_CODEC = 1 Attach voice MODEM CODEC data port
+ * to the MODEM so the CODEC is under
+ * control even if audio driver doesn't
+ * take it over.
+ */
+static void __init ams_delta_latch2_init(void)
+{
+ u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC;
+
+ __raw_writew(latch2, LATCH2_VIRT);
}
static void __init ams_delta_init(void)
@@ -673,6 +688,7 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J18_1610_CAM_D7);
omap_gpio_deps_init();
+ ams_delta_latch2_init();
gpiod_add_hogs(ams_delta_gpio_hogs);
omap_serial_init();
@@ -813,7 +829,6 @@ static void __init ams_delta_led_init(struct gpio_chip *chip)
static int __init ams_delta_gpio_init(void)
{
struct gpio_chip *chip;
- int err;
if (!machine_is_ams_delta())
return -ENODEV;
@@ -824,11 +839,7 @@ static int __init ams_delta_gpio_init(void)
else
ams_delta_led_init(chip);
- err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
- if (err)
- pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
-
- return err;
+ return 0;
}
device_initcall_sync(ams_delta_gpio_init);
@@ -844,33 +855,44 @@ static int __init modem_nreset_init(void)
}
+/*
+ * This function expects MODEM IRQ number already assigned to the port
+ * and fails if it's not.
+ * The MODEM device requires its RESET# pin kept high during probe.
+ * That requirement can be fulfilled in several ways:
+ * - with a descriptor of already functional modem_nreset regulator
+ * assigned to the MODEM private data,
+ * - with the regulator not yet controlled by modem_pm function but
+ * already enabled by default on probe,
+ * - before the modem_nreset regulator is probed, with the pin already
+ * set high explicitly.
+ * The last one is already guaranteed by ams_delta_latch2_init() called
+ * from machine_init.
+ * In order to avoid taking over ttyS0 device slot, the MODEM device
+ * should be registered after OMAP serial ports. Since those ports
+ * are registered at arch_initcall, this function can be called safely
+ * at arch_initcall_sync earliest.
+ */
static int __init ams_delta_modem_init(void)
{
int err;
- omap_cfg_reg(M14_1510_GPIO2);
- ams_delta_modem_ports[0].irq =
- gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ if (!machine_is_ams_delta())
+ return -ENODEV;
- err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
- if (err) {
- pr_err("Couldn't request gpio pin for modem\n");
- return err;
- }
- gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ if (ams_delta_modem_ports[0].irq < 0)
+ return ams_delta_modem_ports[0].irq;
+
+ omap_cfg_reg(M14_1510_GPIO2);
/* Initialize the modem_nreset regulator consumer before use */
modem_priv.regulator = ERR_PTR(-ENODEV);
- ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
- AMS_DELTA_LATCH2_MODEM_CODEC);
-
err = platform_device_register(&ams_delta_modem_device);
- if (err)
- gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
+arch_initcall_sync(ams_delta_modem_init);
static int __init late_init(void)
{
@@ -880,10 +902,6 @@ static int __init late_init(void)
if (err)
return err;
- err = ams_delta_modem_init();
- if (err)
- return err;
-
/*
* Once the modem device is registered, the modem_nreset
* regulator can be requested on behalf of that device.
@@ -898,7 +916,6 @@ static int __init late_init(void)
unregister:
platform_device_unregister(&ams_delta_modem_device);
- gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
index ad6f865d1f16..3b2d8019238a 100644
--- a/arch/arm/mach-omap1/include/mach/board-ams-delta.h
+++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
@@ -59,13 +59,6 @@
#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
#define AMS_DELTA_LATCH2_NGPIO 16
-#ifndef __ASSEMBLY__
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
-#define ams_delta_latch2_write(mask, value) \
- ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
- AMS_DELTA_LATCH2_NGPIO, (mask), (value))
-#endif
-
#endif /* CONFIG_MACH_AMS_DELTA */
#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2ceffd85dd3d..56a1fe90d394 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -188,16 +188,16 @@
/**
* struct clkctrl_provider - clkctrl provider mapping data
- * @addr: base address for the provider
- * @size: size of the provider address space
- * @offset: offset of the provider from PRCM instance base
+ * @num_addrs: number of base address ranges for the provider
+ * @addr: base address(es) for the provider
+ * @size: size(s) of the provider address space(s)
* @node: device node associated with the provider
* @link: list link
*/
struct clkctrl_provider {
- u32 addr;
- u32 size;
- u16 offset;
+ int num_addrs;
+ u32 *addr;
+ u32 *size;
struct device_node *node;
struct list_head link;
};
@@ -724,23 +724,34 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
const __be32 *addrp;
struct clkctrl_provider *provider;
u64 size;
+ int i;
provider = memblock_virt_alloc(sizeof(*provider), 0);
if (!provider)
return -ENOMEM;
- addrp = of_get_address(np, 0, &size, NULL);
- provider->addr = (u32)of_translate_address(np, addrp);
- addrp = of_get_address(np->parent, 0, NULL, NULL);
- provider->offset = provider->addr -
- (u32)of_translate_address(np->parent, addrp);
- provider->addr &= ~0xff;
- provider->size = size | 0xff;
provider->node = np;
- pr_debug("%s: %s: %x...%x [+%x]\n", __func__, np->parent->name,
- provider->addr, provider->addr + provider->size,
- provider->offset);
+ provider->num_addrs =
+ of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2;
+
+ provider->addr =
+ memblock_virt_alloc(sizeof(void *) * provider->num_addrs, 0);
+ if (!provider->addr)
+ return -ENOMEM;
+
+ provider->size =
+ memblock_virt_alloc(sizeof(u32) * provider->num_addrs, 0);
+ if (!provider->size)
+ return -ENOMEM;
+
+ for (i = 0; i < provider->num_addrs; i++) {
+ addrp = of_get_address(np, i, &size, NULL);
+ provider->addr[i] = (u32)of_translate_address(np, addrp);
+ provider->size[i] = size;
+ pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i],
+ provider->addr[i] + provider->size[i]);
+ }
list_add(&provider->link, &clkctrl_providers);
@@ -787,23 +798,26 @@ static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh)
pr_debug("%s: %s: addr=%x\n", __func__, oh->name, addr);
list_for_each_entry(provider, &clkctrl_providers, link) {
- if (provider->addr <= addr &&
- provider->addr + provider->size >= addr) {
- struct of_phandle_args clkspec;
+ int i;
- clkspec.np = provider->node;
- clkspec.args_count = 2;
- clkspec.args[0] = addr - provider->addr -
- provider->offset;
- clkspec.args[1] = 0;
+ for (i = 0; i < provider->num_addrs; i++) {
+ if (provider->addr[i] <= addr &&
+ provider->addr[i] + provider->size[i] > addr) {
+ struct of_phandle_args clkspec;
- clk = of_clk_get_from_provider(&clkspec);
+ clkspec.np = provider->node;
+ clkspec.args_count = 2;
+ clkspec.args[0] = addr - provider->addr[0];
+ clkspec.args[1] = 0;
- pr_debug("%s: %s got %p (offset=%x, provider=%s)\n",
- __func__, oh->name, clk, clkspec.args[0],
- provider->node->parent->name);
+ clk = of_clk_get_from_provider(&clkspec);
- return clk;
+ pr_debug("%s: %s got %p (offset=%x, provider=%pOF)\n",
+ __func__, oh->name, clk,
+ clkspec.args[0], provider->node);
+
+ return clk;
+ }
}
}
@@ -2107,8 +2121,8 @@ static int of_dev_find_hwmod(struct device_node *np,
if (res)
continue;
if (!strcmp(p, oh->name)) {
- pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
- np->name, i, oh->name);
+ pr_debug("omap_hwmod: dt %pOFn[%i] uses hwmod %s\n",
+ np, i, oh->name);
return i;
}
}
@@ -2161,6 +2175,37 @@ static int of_dev_hwmod_lookup(struct device_node *np,
}
/**
+ * omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
+ *
+ * @oh: struct omap_hwmod *
+ * @np: struct device_node *
+ *
+ * Fix up module register offsets for modules with mpu_rt_idx.
+ * Only needed for cpsw with interconnect target module defined
+ * in device tree while still using legacy hwmod platform data
+ * for rev, sysc and syss registers.
+ *
+ * Can be removed when all cpsw hwmod platform data has been
+ * dropped.
+ */
+static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
+ struct device_node *np,
+ struct resource *res)
+{
+ struct device_node *child = NULL;
+ int error;
+
+ child = of_get_next_child(np, child);
+ if (!child)
+ return;
+
+ error = of_address_to_resource(child, oh->mpu_rt_idx, res);
+ if (error)
+ pr_err("%s: error mapping mpu_rt_idx: %i\n",
+ __func__, error);
+}
+
+/**
* omap_hwmod_parse_module_range - map module IO range from device tree
* @oh: struct omap_hwmod *
* @np: struct device_node *
@@ -2210,8 +2255,8 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
return -ENOENT;
if (nr_addr != 1 || nr_size != 1) {
- pr_err("%s: invalid range for %s->%s\n", __func__,
- oh->name, np->name);
+ pr_err("%s: invalid range for %s->%pOFn\n", __func__,
+ oh->name, np);
return -EINVAL;
}
@@ -2219,8 +2264,14 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
base = of_translate_address(np, ranges++);
size = be32_to_cpup(ranges);
- pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
- oh->name, np->name, base, size);
+ pr_debug("omap_hwmod: %s %pOFn at 0x%llx size 0x%llx\n",
+ oh->name, np, base, size);
+
+ if (oh && oh->mpu_rt_idx) {
+ omap_hwmod_fix_mpu_rt_idx(oh, np, res);
+
+ return 0;
+ }
res->start = base;
res->end = base + size - 1;
@@ -2322,8 +2373,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
if (r)
pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
else if (np && index)
- pr_warn("omap_hwmod: %s using broken dt data from %s\n",
- oh->name, np->name);
+ pr_warn("omap_hwmod: %s using broken dt data from %pOFn\n",
+ oh->name, np);
r = _init_mpu_rt_base(oh, NULL, index, np);
if (r < 0) {
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 4f43c1cd5db0..c3c8bf54f033 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -29,17 +29,4 @@ config U300_DEBUG
help
Debug support for U300 in sysfs, procfs etc.
-config MACH_U300_SPIDUMMY
- depends on ARCH_U300
- bool "SSP/SPI dummy chip"
- select SPI
- select SPI_MASTER
- select SPI_PL022
- help
- This creates a small kernel module that creates a dummy
- SPI device to be used for loopback tests. Regularly used
- to test reference designs. If you're not testing SPI,
- you don't need it. Selecting this will activate the
- SPI framework and ARM PL022 support.
-
endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 87d37de054b6..5a8804fa8776 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -4,5 +4,4 @@
obj-y := core.o
-obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
deleted file mode 100644
index 68fe986ca42e..000000000000
--- a/arch/arm/mach-u300/dummyspichip.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * arch/arm/mach-u300/dummyspichip.c
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * This is a dummy loopback SPI "chip" used for testing SPI.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/sysfs.h>
-#include <linux/mutex.h>
-#include <linux/spi/spi.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-/*
- * WARNING! Do not include this pl022-specific controller header
- * for any generic driver. It is only done in this dummy chip
- * because we alter the chip configuration in order to test some
- * different settings on the loopback device. Normal chip configs
- * shall be STATIC and not altered by the driver!
- */
-#include <linux/amba/pl022.h>
-
-struct dummy {
- struct device *dev;
- struct mutex lock;
-};
-
-#define DMA_TEST_SIZE 2048
-
-/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
-static ssize_t dummy_looptest(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct spi_device *spi = to_spi_device(dev);
- struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
-
- /*
- * WARNING! Do not dereference the chip-specific data in any normal
- * driver for a chip. It is usually STATIC and shall not be read
- * or written to. Your chip driver should NOT depend on fields in this
- * struct, this is just used here to alter the behaviour of the chip
- * in order to perform tests.
- */
- int status;
- u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
- 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
- 0xF0, 0x0D};
- u8 rxbuf[14];
- u8 *bigtxbuf_virtual;
- u8 *bigrxbuf_virtual;
-
- if (mutex_lock_interruptible(&p_dummy->lock))
- return -ERESTARTSYS;
-
- bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
- if (bigtxbuf_virtual == NULL) {
- status = -ENOMEM;
- goto out;
- }
- bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
-
- /* Fill TXBUF with some happy pattern */
- memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
-
- /*
- * Force chip to 8 bit mode
- * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
- */
- spi->bits_per_word = 8;
- /* You should NOT DO THIS EITHER */
- spi->master->setup(spi);
-
- /* Now run the tests for 8bit mode */
- pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
- "in 8bit mode\n");
- status = spi_w8r8(spi, 0xAA);
- if (status < 0)
- pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
- status);
- else
- pr_info("Simple test 1: SUCCESS!\n");
-
- pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
- "in 8bit mode (full FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
- status);
- else
- pr_info("Simple test 2: SUCCESS!\n");
-
- pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
- "in 8bit mode (see if we overflow FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 3: SUCCESS!\n");
-
- pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
- "bytes garbage with spi_read() in 8bit mode\n");
- status = spi_write(spi, &txbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
- status);
- else
- pr_info("Simple test 4 step 1: SUCCESS!\n");
- status = spi_read(spi, &rxbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
- status);
- else
- pr_info("Simple test 4 step 2: SUCCESS!\n");
-
- pr_info("Simple test 5: write 14 bytes with spi_write(), read "
- "14 bytes garbage with spi_read() in 8bit mode\n");
- status = spi_write(spi, &txbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 5 step 1: SUCCESS!\n");
- status = spi_read(spi, &rxbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 5: SUCCESS!\n");
-
- pr_info("Simple test 6: write %d bytes with spi_write(), "
- "read %d bytes garbage with spi_read() in 8bit mode\n",
- DMA_TEST_SIZE, DMA_TEST_SIZE);
- status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 6 step 1: SUCCESS!\n");
- status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 6: SUCCESS!\n");
-
-
- /*
- * Force chip to 16 bit mode
- * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
- */
- spi->bits_per_word = 16;
- /* You should NOT DO THIS EITHER */
- spi->master->setup(spi);
-
- pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
- "in 16bit bus mode\n");
- status = spi_w8r8(spi, 0xAA);
- if (status == -EIO)
- pr_info("Simple test 7: SUCCESS! (expected failure with "
- "status EIO)\n");
- else if (status < 0)
- pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
- status);
- else
- pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
-
- pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
- "in 16bit mode (full FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
- status);
- else
- pr_info("Simple test 8: SUCCESS!\n");
-
- pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
- "in 16bit mode (see if we overflow FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 9: SUCCESS!\n");
-
- pr_info("Simple test 10: write %d bytes with spi_write(), "
- "read %d bytes garbage with spi_read() in 16bit mode\n",
- DMA_TEST_SIZE, DMA_TEST_SIZE);
- status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 10 step 1: SUCCESS!\n");
-
- status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 10: SUCCESS!\n");
-
- status = sprintf(buf, "loop test complete\n");
- kfree(bigrxbuf_virtual);
- kfree(bigtxbuf_virtual);
- out:
- mutex_unlock(&p_dummy->lock);
- return status;
-}
-
-static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
-
-static int pl022_dummy_probe(struct spi_device *spi)
-{
- struct dummy *p_dummy;
- int status;
-
- dev_info(&spi->dev, "probing dummy SPI device\n");
-
- p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
- if (!p_dummy)
- return -ENOMEM;
-
- dev_set_drvdata(&spi->dev, p_dummy);
- mutex_init(&p_dummy->lock);
-
- /* sysfs hook */
- status = device_create_file(&spi->dev, &dev_attr_looptest);
- if (status) {
- dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
- goto out_dev_create_looptest_failed;
- }
-
- return 0;
-
-out_dev_create_looptest_failed:
- dev_set_drvdata(&spi->dev, NULL);
- kfree(p_dummy);
- return status;
-}
-
-static int pl022_dummy_remove(struct spi_device *spi)
-{
- struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
-
- dev_info(&spi->dev, "removing dummy SPI device\n");
- device_remove_file(&spi->dev, &dev_attr_looptest);
- dev_set_drvdata(&spi->dev, NULL);
- kfree(p_dummy);
-
- return 0;
-}
-
-static const struct of_device_id pl022_dummy_dt_match[] = {
- { .compatible = "arm,pl022-dummy" },
- {},
-};
-
-static struct spi_driver pl022_dummy_driver = {
- .driver = {
- .name = "spi-dummy",
- .of_match_table = pl022_dummy_dt_match,
- },
- .probe = pl022_dummy_probe,
- .remove = pl022_dummy_remove,
-};
-
-module_spi_driver(pl022_dummy_driver);
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index f0292a30e6f6..10ef99ce1d90 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -233,7 +233,7 @@ int __init zynq_early_slcr_init(void)
register_restart_handler(&zynq_slcr_restart_nb);
- pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
+ pr_info("%pOFn mapped to %p\n", np, zynq_slcr_base);
of_node_put(np);
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-31 19:22:40 +0100