1 files changed, 0 insertions, 162 deletions

diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
deleted file mode 100644
index ff7e23298827..000000000000
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * ATSTK1003 daughterboard-specific init code
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <linux/spi/at73c213.h>
-#include <linux/spi/spi.h>
-#include <linux/atmel-mci.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 20000000,	/* 20 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static struct at73c213_board_info at73c213_data = {
-	.ssc_id		= 0,
-	.shortname	= "AVR32 STK1000 external DAC",
-};
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-static struct spi_board_info spi0_board_info[] __initdata = {
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-	{
-		/* AT73C213 */
-		.modalias	= "at73c213",
-		.max_speed_hz	= 200000,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_1,
-		.platform_data	= &at73c213_data,
-	},
-#endif
-	/*
-	 * We can control the LTV350QV LCD panel, but it isn't much
-	 * point since we don't have an LCD controller...
-	 */
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-static struct spi_board_info spi1_board_info[] __initdata = { {
-	/* patch in custom entries here */
-} };
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
-		.wp_pin		= -ENODEV,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static void __init atstk1003_setup_extdac(void)
-{
-	struct clk *gclk;
-	struct clk *pll;
-
-	gclk = clk_get(NULL, "gclk0");
-	if (IS_ERR(gclk))
-		goto err_gclk;
-	pll = clk_get(NULL, "pll0");
-	if (IS_ERR(pll))
-		goto err_pll;
-
-	if (clk_set_parent(gclk, pll)) {
-		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-		goto err_set_clk;
-	}
-
-	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
-	at73c213_data.dac_clk = gclk;
-
-err_set_clk:
-	clk_put(pll);
-err_pll:
-	clk_put(gclk);
-err_gclk:
-	return;
-}
-#else
-static void __init atstk1003_setup_extdac(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-
-void __init setup_board(void)
-{
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-#else
-	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-#endif
-	/* USART 2/unused: expansion connector */
-	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-
-	at32_setup_serial_console(0);
-}
-
-static int __init atstk1003_init(void)
-{
-	/*
-	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
-	 * SDRAM-specific pins so that nobody messes with them.
-	 */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_usart(1);
-#else
-	at32_add_device_usart(0);
-#endif
-	at32_add_device_usart(2);
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-#endif
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-#endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, &mci0_data);
-#endif
-	at32_add_device_usba(0, NULL);
-#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-	at32_add_device_ssc(0, ATMEL_SSC_TX);
-#endif
-
-	atstk1000_setup_j2_leds();
-	atstk1003_setup_extdac();
-
-	return 0;
-}
-postcore_initcall(atstk1003_init);