5 files changed, 220 insertions, 0 deletions
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
new file mode 100644
index 000000000000..df9499480530
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= setup.o spi.o flash.o
+obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
new file mode 100644
index 000000000000..49164e9aadd6
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -0,0 +1,37 @@
+/*
+ * ATSTK1002 daughterboard-specific init code
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+#include <asm/arch/board.h>
+
+struct eth_platform_data __initdata eth0_data = {
+	.valid		= 1,
+	.mii_phy_addr	= 0x10,
+	.is_rmii	= 0,
+	.hw_addr	= { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb },
+};
+
+extern struct lcdc_platform_data atstk1000_fb0_data;
+
+static int __init atstk1002_init(void)
+{
+	at32_add_system_devices();
+
+	at32_add_device_usart(1);	/* /dev/ttyS0 */
+	at32_add_device_usart(2);	/* /dev/ttyS1 */
+	at32_add_device_usart(3);	/* /dev/ttyS2 */
+
+	at32_add_device_eth(0, &eth0_data);
+	at32_add_device_spi(0);
+	at32_add_device_lcdc(0, &atstk1000_fb0_data);
+
+	return 0;
+}
+postcore_initcall(atstk1002_init);
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
new file mode 100644
index 000000000000..aac4300cca12
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -0,0 +1,95 @@
+/*
+ * ATSTK1000 board-specific flash initialization
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/arch/smc.h>
+
+static struct smc_config flash_config __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 40,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 80,
+	.nrd_pulse		= 40,
+	.ncs_write_pulse	= 65,
+	.nwe_pulse		= 55,
+
+	.read_cycle		= 120,
+	.write_cycle		= 120,
+
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+static struct mtd_partition flash_parts[] = {
+	{
+		.name           = "u-boot",
+		.offset         = 0x00000000,
+		.size           = 0x00020000,           /* 128 KiB */
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "root",
+		.offset         = 0x00020000,
+		.size           = 0x007d0000,
+	},
+	{
+		.name           = "env",
+		.offset         = 0x007f0000,
+		.size           = 0x00010000,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts),
+	.parts		= flash_parts,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init atstk1000_flash_init(void)
+{
+	int ret;
+
+	ret = smc_set_configuration(0, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device);
+
+	return 0;
+}
+device_initcall(atstk1000_flash_init);
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
new file mode 100644
index 000000000000..191ab85de9a3
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -0,0 +1,59 @@
+/*
+ * ATSTK1000 board-specific setup code.
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+
+#include <asm/setup.h>
+
+#include <asm/arch/board.h>
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+struct lcdc_platform_data __initdata atstk1000_fb0_data;
+
+asmlinkage void __init board_early_init(void)
+{
+	extern void sdram_init(void);
+
+#ifdef CONFIG_LOADER_STANDALONE
+	sdram_init();
+#endif
+}
+
+void __init board_setup_fbmem(unsigned long fbmem_start,
+			      unsigned long fbmem_size)
+{
+	if (!fbmem_size)
+		return;
+
+	if (!fbmem_start) {
+		void *fbmem;
+
+		fbmem = alloc_bootmem_low_pages(fbmem_size);
+		fbmem_start = __pa(fbmem);
+	} else {
+		pg_data_t *pgdat;
+
+		for_each_online_pgdat(pgdat) {
+			if (fbmem_start >= pgdat->bdata->node_boot_start
+			    && fbmem_start <= pgdat->bdata->node_low_pfn)
+				reserve_bootmem_node(pgdat, fbmem_start,
+						     fbmem_size);
+		}
+	}
+
+	printk("%luKiB framebuffer memory at address 0x%08lx\n",
+	       fbmem_size >> 10, fbmem_start);
+	atstk1000_fb0_data.fbmem_start = fbmem_start;
+	atstk1000_fb0_data.fbmem_size = fbmem_size;
+}
diff --git a/arch/avr32/boards/atstk1000/spi.c b/arch/avr32/boards/atstk1000/spi.c
new file mode 100644
index 000000000000..567726c82c6e
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/spi.c
@@ -0,0 +1,27 @@
+/*
+ * ATSTK1000 SPI devices
+ *
+ * Copyright (C) 2005 Atmel Norway
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "ltv350qv",
+		.max_speed_hz	= 16000000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+	},
+};
+
+static int board_init_spi(void)
+{
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+	return 0;
+}
+arch_initcall(board_init_spi);