diff options
Diffstat (limited to 'arch/avr32')
26 files changed, 2045 insertions, 133 deletions
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 05fe3053dcae..35e3bd9858df 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -127,13 +127,13 @@ config BOARD_HAMMERHEAD select CPU_AT32AP7000 select USB_ARCH_HAS_HCD help - The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. + The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. - The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered + The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). - Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is + Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. @@ -144,6 +144,19 @@ config BOARD_FAVR_32 bool "Favr-32 LCD-board" select CPU_AT32AP7000 +config BOARD_MERISC + bool "Merisc board" + select CPU_AT32AP7000 + help + Merisc is the family name for a range of AVR32-based boards. + + The boards are designed to be used in a man-machine + interfacing environment, utilizing a touch-based graphical + user interface. They host a vast range of I/O peripherals as + well as a large SDRAM & Flash memory bank. + + For more information see: http://www.martinsson.se/merisc + config BOARD_MIMC200 bool "MIMC200 CPU board" select CPU_AT32AP7000 @@ -153,6 +166,7 @@ source "arch/avr32/boards/atstk1000/Kconfig" source "arch/avr32/boards/atngw100/Kconfig" source "arch/avr32/boards/hammerhead/Kconfig" source "arch/avr32/boards/favr-32/Kconfig" +source "arch/avr32/boards/merisc/Kconfig" choice prompt "Boot loader type" diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index f3ef3bbf797c..0b97e14f73f6 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -35,6 +35,7 @@ core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ core-$(CONFIG_BOARD_HAMMERHEAD) += arch/avr32/boards/hammerhead/ core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/ +core-$(CONFIG_BOARD_MERISC) += arch/avr32/boards/merisc/ core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ core-y += arch/avr32/kernel/ diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c index 8140b22b3461..00337112c5ac 100644 --- a/arch/avr32/boards/atngw100/evklcd10x.c +++ b/arch/avr32/boards/atngw100/evklcd10x.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/linkage.h> +#include <linux/gpio.h> #include <linux/fb.h> #include <linux/platform_device.h> @@ -19,26 +20,26 @@ #include <asm/setup.h> #include <mach/at32ap700x.h> +#include <mach/portmux.h> #include <mach/board.h> +#include <sound/atmel-ac97c.h> + static struct ac97c_platform_data __initdata ac97c0_data = { - .dma_rx_periph_id = 3, - .dma_tx_periph_id = 4, - .dma_controller_id = 0, - .reset_pin = GPIO_PIN_PB(19), + .reset_pin = GPIO_PIN_PB(19), }; #ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA static struct fb_videomode __initdata tcg057vglad_modes[] = { { - .name = "640x480 @ 60", - .refresh = 60, + .name = "640x480 @ 50", + .refresh = 50, .xres = 640, .yres = 480, .pixclock = KHZ2PICOS(25180), - .left_margin = 64, .right_margin = 31, - .upper_margin = 34, .lower_margin = 2, - .hsync_len = 96, .vsync_len = 4, + .left_margin = 64, .right_margin = 96, + .upper_margin = 34, .lower_margin = 11, + .hsync_len = 64, .vsync_len = 15, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, @@ -69,14 +70,14 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { #elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA static struct fb_videomode __initdata tcg057qvlad_modes[] = { { - .name = "320x240 @ 60", - .refresh = 60, + .name = "320x240 @ 50", + .refresh = 50, .xres = 320, .yres = 240, .pixclock = KHZ2PICOS(6300), - .left_margin = 52, .right_margin = 28, - .upper_margin = 7, .lower_margin = 2, - .hsync_len = 96, .vsync_len = 4, + .left_margin = 34, .right_margin = 46, + .upper_margin = 7, .lower_margin = 15, + .hsync_len = 64, .vsync_len = 12, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, @@ -144,12 +145,29 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { }; #endif +static void atevklcd10x_lcdc_power_control(int on) +{ + gpio_set_value(GPIO_PIN_PB(15), on); +} + static int __init atevklcd10x_init(void) { - at32_add_device_ac97c(0, &ac97c0_data); + /* PB15 is connected to the enable line on the boost regulator + * controlling the backlight for the LCD panel. + */ + at32_select_gpio(GPIO_PIN_PB(15), AT32_GPIOF_OUTPUT); + gpio_request(GPIO_PIN_PB(15), "backlight"); + gpio_direction_output(GPIO_PIN_PB(15), 0); + + atevklcd10x_lcdc_data.atmel_lcdfb_power_control = + atevklcd10x_lcdc_power_control; at32_add_device_lcdc(0, &atevklcd10x_lcdc_data, - fbmem_start, fbmem_size, 1); + fbmem_start, fbmem_size, + ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL); + + at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH); + return 0; } postcore_initcall(atevklcd10x_init); diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 05d3722fff18..5b022aad4bd9 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -56,13 +56,8 @@ static struct spi_board_info spi0_board_info[] __initdata = { static struct mci_platform_data __initdata mci0_data = { .slot[0] = { .bus_width = 4, -#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X .detect_pin = GPIO_PIN_PC(25), .wp_pin = GPIO_PIN_PE(0), -#else - .detect_pin = GPIO_PIN_NONE, - .wp_pin = GPIO_PIN_NONE, -#endif }, }; @@ -123,7 +118,7 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 1f33a106905c..2adc261c9e3d 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -252,12 +252,12 @@ static void __init atstk1002_setup_extdac(void) void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ + at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index b3a23c88bcfe..ff7e23298827 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -115,12 +115,12 @@ static void __init atstk1003_setup_extdac(void) void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ + at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 29b35aca96cd..69a9f0f08c6e 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -120,12 +120,12 @@ static void __init atstk1004_setup_extdac(void) void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ + at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 745c408c2ac5..46c9b0a224cf 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -22,6 +22,8 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <sound/atmel-abdac.h> + #include <video/atmel_lcdc.h> #include <asm/setup.h> @@ -41,6 +43,9 @@ unsigned long at32_board_osc_rates[3] = { /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; +static struct atmel_abdac_pdata __initdata abdac0_data = { +}; + struct eth_addr { u8 addr[6]; }; @@ -245,7 +250,7 @@ static void __init favr32_setup_atmel_pwm_bl(void) void __init setup_board(void) { - at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */ + at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */ at32_setup_serial_console(0); } @@ -326,7 +331,7 @@ static int __init favr32_init(void) spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3)); - set_abdac_rate(at32_add_device_abdac(0)); + set_abdac_rate(at32_add_device_abdac(0, &abdac0_data)); at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel); at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c index 559bbcb03f9b..776c3cb9b6e4 100644 --- a/arch/avr32/boards/hammerhead/flash.c +++ b/arch/avr32/boards/hammerhead/flash.c @@ -280,13 +280,13 @@ static struct resource hh_fpga0_resource[] = { }, }; -static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK; +static u64 hh_fpga0_dma_mask = DMA_BIT_MASK(32); static struct platform_device hh_fpga0_device = { .name = "hh_fpga", .id = 0, .dev = { .dma_mask = &hh_fpga0_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = hh_fpga0_resource, .num_resources = ARRAY_SIZE(hh_fpga0_resource), diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c index 4d2fe82b2029..dd009875a405 100644 --- a/arch/avr32/boards/hammerhead/setup.c +++ b/arch/avr32/boards/hammerhead/setup.c @@ -29,6 +29,8 @@ #include <mach/init.h> #include <mach/portmux.h> +#include <sound/atmel-ac97c.h> + #include "../../mach-at32ap/clock.h" #include "flash.h" @@ -163,7 +165,7 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ at32_setup_serial_console(0); } @@ -233,7 +235,7 @@ static int __init hammerhead_init(void) i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); #ifdef CONFIG_BOARD_HAMMERHEAD_SND - at32_add_device_ac97c(0, &ac97c_data); + at32_add_device_ac97c(0, &ac97c_data, AC97C_BOTH); #endif /* Select the Touchscreen interrupt pin mode */ diff --git a/arch/avr32/boards/merisc/Kconfig b/arch/avr32/boards/merisc/Kconfig new file mode 100644 index 000000000000..7e043275d5a9 --- /dev/null +++ b/arch/avr32/boards/merisc/Kconfig @@ -0,0 +1,5 @@ +# Merisc customization + +if BOARD_MERISC + +endif # BOARD_MERISC diff --git a/arch/avr32/boards/merisc/Makefile b/arch/avr32/boards/merisc/Makefile new file mode 100644 index 000000000000..d24c78729bd1 --- /dev/null +++ b/arch/avr32/boards/merisc/Makefile @@ -0,0 +1 @@ +obj-y += setup.o flash.o display.o merisc_sysfs.o diff --git a/arch/avr32/boards/merisc/display.c b/arch/avr32/boards/merisc/display.c new file mode 100644 index 000000000000..85a543cd4abc --- /dev/null +++ b/arch/avr32/boards/merisc/display.c @@ -0,0 +1,65 @@ +/* + * Display setup code for the Merisc board + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <video/atmel_lcdc.h> +#include <asm/setup.h> +#include <mach/board.h> +#include "merisc.h" + +static struct fb_videomode merisc_fb_videomode[] = { + { + .refresh = 44, + .xres = 640, + .yres = 480, + .left_margin = 96, + .right_margin = 96, + .upper_margin = 34, + .lower_margin = 8, + .hsync_len = 64, + .vsync_len = 64, + .name = "640x480 @ 44", + .pixclock = KHZ2PICOS(25180), + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs merisc_fb_monspecs = { + .manufacturer = "Kyo", + .monitor = "TCG075VG2AD", + .modedb = merisc_fb_videomode, + .modedb_len = ARRAY_SIZE(merisc_fb_videomode), + .hfmin = 30000, + .hfmax = 33333, + .vfmin = 60, + .vfmax = 90, + .dclkmax = 30000000, +}; + +struct atmel_lcdfb_info merisc_lcdc_data = { + .default_bpp = 24, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &merisc_fb_monspecs, + .guard_time = 2, +}; + +static int __init merisc_display_init(void) +{ + at32_add_device_lcdc(0, &merisc_lcdc_data, fbmem_start, + fbmem_size, 0); + + return 0; +} +device_initcall(merisc_display_init); diff --git a/arch/avr32/boards/merisc/flash.c b/arch/avr32/boards/merisc/flash.c new file mode 100644 index 000000000000..8e856fd6f013 --- /dev/null +++ b/arch/avr32/boards/merisc/flash.c @@ -0,0 +1,139 @@ +/* + * Merisc board-specific flash initialization + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <mach/smc.h> + +/* Will be translated to units of 14.3 ns, rounded up */ +static struct smc_timing flash_timing __initdata = { + .ncs_read_setup = 1 * 14, + .nrd_setup = 5 * 14, + .ncs_write_setup = 1 * 14, + .nwe_setup = 2 * 14, + + .ncs_read_pulse = 12 * 14, + .nrd_pulse = 7 * 14, + .ncs_write_pulse = 8 * 14, + .nwe_pulse = 4 * 14, + + .read_cycle = 14 * 14, + .write_cycle = 10 * 14, +}; + +static struct smc_config flash_config __initdata = { + .bus_width = 2, + .nrd_controlled = 1, + .nwe_controlled = 1, + .byte_write = 1, + .tdf_cycles = 3, +}; + +static struct mtd_partition flash_0_parts[] = { + { + .name = "boot", + .offset = 0x00000000, + .size = 0x00060000, + .mask_flags = 0, + }, + { + .name = "kernel", + .offset = 0x00060000, + .size = 0x00200000, + .mask_flags = 0, + }, + { + .name = "root", + .offset = 0x00260000, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct mtd_partition flash_1_parts[] = { + { + .name = "2ndflash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct physmap_flash_data flash_data[] = { + { + .width = 2, + .nr_parts = ARRAY_SIZE(flash_0_parts), + .parts = flash_0_parts, + }, + { + .width = 2, + .nr_parts = ARRAY_SIZE(flash_1_parts), + .parts = flash_1_parts, + } +}; + +static struct resource flash_resource[] = { + { + .start = 0x00000000, + .end = 0x03ffffff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x04000000, + .end = 0x07ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device flash_device[] = { + { + .name = "physmap-flash", + .id = 0, + .resource = &flash_resource[0], + .num_resources = 1, + .dev = { + .platform_data = &flash_data[0], + }, + }, + { + .name = "physmap-flash", + .id = 1, + .resource = &flash_resource[1], + .num_resources = 1, + .dev = { + .platform_data = &flash_data[1], + }, + }, +}; + +static int __init merisc_flash_init(void) +{ + int ret; + smc_set_timing(&flash_config, &flash_timing); + + ret = smc_set_configuration(0, &flash_config); + if (ret < 0) { + printk(KERN_ERR "Merisc: failed to set NOR flash timing #0\n"); + return ret; + } + + ret = smc_set_configuration(4, &flash_config); + if (ret < 0) { + printk(KERN_ERR "Merisc: failed to set NOR flash timing #1\n"); + return ret; + } + + platform_device_register(&flash_device[0]); + platform_device_register(&flash_device[1]); + return 0; +} +device_initcall(merisc_flash_init); diff --git a/arch/avr32/boards/merisc/merisc.h b/arch/avr32/boards/merisc/merisc.h new file mode 100644 index 000000000000..50ffb2f3fcbf --- /dev/null +++ b/arch/avr32/boards/merisc/merisc.h @@ -0,0 +1,18 @@ +/* + * Merisc exports + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AVR32_BOARDS_MERISC_MERISC_H +#define __ARCH_AVR32_BOARDS_MERISC_MERISC_H + +const char *merisc_revision(void); +const char *merisc_model(void); + +extern struct class merisc_class; + +#endif /* __ARCH_AVR32_BOARDS_MERISC_MERISC_H */ diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c new file mode 100644 index 000000000000..df431fdba9ad --- /dev/null +++ b/arch/avr32/boards/merisc/merisc_sysfs.c @@ -0,0 +1,65 @@ +/* + * Merisc sysfs exports + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/timer.h> +#include <linux/err.h> +#include <linux/ctype.h> +#include "merisc.h" + +static ssize_t merisc_model_show(struct class *class, char *buf) +{ + ssize_t ret = 0; + + sprintf(buf, "%s\n", merisc_model()); + ret = strlen(buf) + 1; + + return ret; +} + +static ssize_t merisc_revision_show(struct class *class, char *buf) +{ + ssize_t ret = 0; + + sprintf(buf, "%s\n", merisc_revision()); + ret = strlen(buf) + 1; + + return ret; +} + +static struct class_attribute merisc_class_attrs[] = { + __ATTR(model, S_IRUGO, merisc_model_show, NULL), + __ATTR(revision, S_IRUGO, merisc_revision_show, NULL), + __ATTR_NULL, +}; + +struct class merisc_class = { + .name = "merisc", + .owner = THIS_MODULE, + .class_attrs = merisc_class_attrs, +}; + +static int __init merisc_sysfs_init(void) +{ + int status; + + status = class_register(&merisc_class); + if (status < 0) + return status; + + return 0; +} + +postcore_initcall(merisc_sysfs_init); diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c new file mode 100644 index 000000000000..20b300cf105a --- /dev/null +++ b/arch/avr32/boards/merisc/setup.c @@ -0,0 +1,297 @@ +/* + * Board-specific setup code for the Merisc + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/etherdevice.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/irq.h> +#include <linux/fb.h> +#include <linux/atmel-mci.h> + +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/gpio.h> + +#include <mach/at32ap700x.h> +#include <mach/board.h> +#include <mach/init.h> +#include <mach/portmux.h> + +#include "merisc.h" + +/* Holds the autodetected board model and revision */ +static int merisc_board_id; + +/* Initialized by bootloader-specific startup code. */ +struct tag *bootloader_tags __initdata; + +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + +struct eth_addr { + u8 addr[6]; +}; + +static struct eth_addr __initdata hw_addr[2]; +static struct eth_platform_data __initdata eth_data[2]; + +static int ads7846_get_pendown_state_PB26(void) +{ + return !gpio_get_value(GPIO_PIN_PB(26)); +} + +static int ads7846_get_pendown_state_PB28(void) +{ + return !gpio_get_value(GPIO_PIN_PB(28)); +} + +static struct ads7846_platform_data __initdata ads7846_data = { + .model = 7846, + .vref_delay_usecs = 100, + .vref_mv = 0, + .keep_vref_on = 0, + .settle_delay_usecs = 150, + .penirq_recheck_delay_usecs = 1, + .x_plate_ohms = 800, + .debounce_rep = 4, + .debounce_max = 10, + .debounce_tol = 50, + .get_pendown_state = ads7846_get_pendown_state_PB26, + .filter_init = NULL, + .filter = NULL, + .filter_cleanup = NULL, +}; + +static struct spi_board_info __initdata spi0_board_info[] = { + { + .modalias = "ads7846", + .max_speed_hz = 3250000, + .chip_select = 0, + .bus_num = 0, + .platform_data = &ads7846_data, + .mode = SPI_MODE_0, + }, +}; + +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = GPIO_PIN_PE(19), + .wp_pin = GPIO_PIN_PE(20), + }, +}; + +static int __init parse_tag_ethernet(struct tag *tag) +{ + int i; + + i = tag->u.ethernet.mac_index; + if (i < ARRAY_SIZE(hw_addr)) { + memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, + sizeof(hw_addr[i].addr)); + } + + return 0; +} +__tagtable(ATAG_ETHERNET, parse_tag_ethernet); + +static void __init set_hw_addr(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const u8 *addr; + void __iomem *regs; + struct clk *pclk; + + if (!res) + return; + + if (pdev->id >= ARRAY_SIZE(hw_addr)) + return; + + addr = hw_addr[pdev->id].addr; + if (!is_valid_ether_addr(addr)) + return; + + regs = (void __iomem __force *)res->start; + pclk = clk_get(&pdev->dev, "pclk"); + if (!pclk) + return; + + clk_enable(pclk); + __raw_writel((addr[3] << 24) | (addr[2] << 16) + | (addr[1] << 8) | addr[0], regs + 0x98); + __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); + clk_disable(pclk); + clk_put(pclk); +} + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PIN_PA(6), + .scl_pin = GPIO_PIN_PA(7), + .sda_is_open_drain = 1, + .scl_is_open_drain = 1, + .udelay = 2, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51) + }, +}; + +#ifdef CONFIG_LEDS_ATMEL_PWM +static struct gpio_led stk_pwm_led[] = { + { + .name = "backlight", + .gpio = 0, /* PWM channel 0 (LCD backlight) */ + }, +}; + +static struct gpio_led_platform_data stk_pwm_led_data = { + .num_leds = ARRAY_SIZE(stk_pwm_led), + .leds = stk_pwm_led, +}; + +static struct platform_device stk_pwm_led_dev = { + .name = "leds-atmel-pwm", + .id = -1, + .dev = { + .platform_data = &stk_pwm_led_data, + }, +}; +#endif + +const char *merisc_model(void) +{ + switch (merisc_board_id) { + case 0: + case 1: + return "500-01"; + case 2: + return "BT"; + default: + return "Unknown"; + } +} + +const char *merisc_revision(void) +{ + switch (merisc_board_id) { + case 0: + return "B"; + case 1: + return "D"; + case 2: + return "A"; + default: + return "Unknown"; + } +} + +static void detect_merisc_board_id(void) +{ + /* Board ID pins MUST be set as input or the board may be damaged */ + at32_select_gpio(GPIO_PIN_PA(24), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(25), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(26), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(27), AT32_GPIOF_PULLUP); + + merisc_board_id = !gpio_get_value(GPIO_PIN_PA(24)) + + !gpio_get_value(GPIO_PIN_PA(25)) * 2 + + !gpio_get_value(GPIO_PIN_PA(26)) * 4 + + !gpio_get_value(GPIO_PIN_PA(27)) * 8; +} + +void __init setup_board(void) +{ + at32_map_usart(0, 0, 0); + at32_map_usart(1, 1, 0); + at32_map_usart(3, 3, 0); + at32_setup_serial_console(1); +} + +static int __init merisc_init(void) +{ + detect_merisc_board_id(); + + printk(KERN_NOTICE "BOARD: Merisc %s revision %s\n", merisc_model(), + merisc_revision()); + + /* Reserve pins for SDRAM */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26)); + + if (merisc_board_id >= 1) + at32_map_usart(2, 2, 0); + + at32_add_device_usart(0); + at32_add_device_usart(1); + if (merisc_board_id >= 1) + at32_add_device_usart(2); + at32_add_device_usart(3); + set_hw_addr(at32_add_device_eth(0, ð_data[0])); + + /* ADS7846 PENIRQ */ + if (merisc_board_id == 0) { + ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB26; + at32_select_periph(GPIO_PIOB_BASE, 1 << 26, + GPIO_PERIPH_A, AT32_GPIOF_PULLUP); + spi0_board_info[0].irq = AT32_EXTINT(1); + } else { + ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB28; + at32_select_periph(GPIO_PIOB_BASE, 1 << 28, GPIO_PERIPH_A, + AT32_GPIOF_PULLUP); + spi0_board_info[0].irq = AT32_EXTINT(3); + } + + /* ADS7846 busy pin */ + at32_select_gpio(GPIO_PIN_PA(4), AT32_GPIOF_PULLUP); + + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); + + at32_add_device_mci(0, &mci0_data); + +#ifdef CONFIG_LEDS_ATMEL_PWM + at32_add_device_pwm((1 << 0) | (1 << 2)); + platform_device_register(&stk_pwm_led_dev); +#else + at32_add_device_pwm((1 << 2)); +#endif + + at32_select_gpio(i2c_gpio_data.sda_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(i2c_gpio_data.scl_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + platform_device_register(&i2c_gpio_device); + + i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); + + return 0; +} +postcore_initcall(merisc_init); diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c index 2b58d61f0afc..c1b2175b4fea 100644 --- a/arch/avr32/boards/mimc200/setup.c +++ b/arch/avr32/boards/mimc200/setup.c @@ -175,10 +175,10 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ - at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */ - at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */ - at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ + at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ + at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */ + at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */ + at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ } static struct i2c_gpio_platform_data i2c_gpio_data = { diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig new file mode 100644 index 000000000000..41554db4877f --- /dev/null +++ b/arch/avr32/configs/merisc_defconfig @@ -0,0 +1,1237 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc1 +# Wed Mar 25 14:06:15 2009 +# +CONFIG_AVR32=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_FREEZER is not set + +# +# System Type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SUBARCH_AVR32B=y +CONFIG_MMU=y +CONFIG_PERFORMANCE_COUNTERS=y +CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP700X=y +CONFIG_CPU_AT32AP7000=y +# CONFIG_BOARD_ATSTK1000 is not set +# CONFIG_BOARD_ATNGW100 is not set +# CONFIG_BOARD_HAMMERHEAD is not set +# CONFIG_BOARD_FAVR_32 is not set +# CONFIG_BOARD_MIMC200 is not set +CONFIG_BOARD_MERISC=y +CONFIG_LOADER_U_BOOT=y + +# +# Atmel AVR32 AP options +# +CONFIG_AP700X_32_BIT_SMC=y +# CONFIG_AP700X_16_BIT_SMC is not set +# CONFIG_AP700X_8_BIT_SMC is not set +CONFIG_LOAD_ADDRESS=0x10000000 +CONFIG_ENTRY_ADDRESS=0x90000000 +CONFIG_PHYS_OFFSET=0x10000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y +# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set +# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set +# CONFIG_NEED_NODE_MEMMAP_SIZE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_OWNERSHIP_TRACE is not set +# CONFIG_NMI_DEBUGGING is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_CMDLINE="" + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y + +# +# CAN Device Drivers +# +# CONFIG_CAN_VCAN is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +CONFIG_MTD_ABSENT=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +# CONFIG_ATMEL_TCLIB is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MACB=y +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_AT32AP700X_WDT is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_ATMELMCI_DMA=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_ATMEL_PWM=y +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_AT32AP700X is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_DW_DMAC=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/avr32/include/asm/ftrace.h b/arch/avr32/include/asm/ftrace.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/avr32/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/avr32/include/asm/hardirq.h b/arch/avr32/include/asm/hardirq.h index 267354356f60..015bc75ea798 100644 --- a/arch/avr32/include/asm/hardirq.h +++ b/arch/avr32/include/asm/hardirq.h @@ -20,15 +20,4 @@ void ack_bad_irq(unsigned int irq); #endif /* __ASSEMBLY__ */ -#define HARDIRQ_BITS 12 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - #endif /* __ASM_AVR32_HARDIRQ_H */ diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 43ae555ecb33..1bbe1da54869 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -332,7 +332,7 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) asmlinkage void ret_from_fork(void); -int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, +int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long unused, struct task_struct *p, struct pt_regs *regs) { diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 3fbfd1e32a9e..eb9d4dc2e86d 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -26,6 +26,9 @@ #include <mach/portmux.h> #include <mach/sram.h> +#include <sound/atmel-abdac.h> +#include <sound/atmel-ac97c.h> + #include <video/atmel_lcdc.h> #include "clock.h" @@ -57,26 +60,26 @@ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more. */ #define DEFINE_DEV(_name, _id) \ -static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ static struct platform_device _name##_id##_device = { \ .name = #_name, \ .id = _id, \ .dev = { \ .dma_mask = &_name##_id##_dma_mask, \ - .coherent_dma_mask = DMA_32BIT_MASK, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ }, \ .resource = _name##_id##_resource, \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ } #define DEFINE_DEV_DATA(_name, _id) \ -static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ static struct platform_device _name##_id##_device = { \ .name = #_name, \ .id = _id, \ .dev = { \ .dma_mask = &_name##_id##_dma_mask, \ .platform_data = &_name##_id##_data, \ - .coherent_dma_mask = DMA_32BIT_MASK, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ }, \ .resource = _name##_id##_resource, \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ @@ -963,56 +966,68 @@ static struct resource atmel_usart3_resource[] = { DEFINE_DEV_DATA(atmel_usart, 3); DEV_CLK(usart, atmel_usart3, pba, 6); -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(int flags) { u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10); select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(int flags) { u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16); select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); } -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(int flags) { u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28); select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(int flags) { u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19); select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static struct platform_device *__initdata at32_usarts[4]; -void __init at32_map_usart(unsigned int hw_id, unsigned int line) +void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; switch (hw_id) { case 0: pdev = &atmel_usart0_device; - configure_usart0_pins(); + configure_usart0_pins(flags); break; case 1: pdev = &atmel_usart1_device; - configure_usart1_pins(); + configure_usart1_pins(flags); break; case 2: pdev = &atmel_usart2_device; - configure_usart2_pins(); + configure_usart2_pins(flags); break; case 3: pdev = &atmel_usart3_device; - configure_usart3_pins(); + configure_usart3_pins(flags); break; default: return; @@ -1753,7 +1768,7 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data) if (platform_device_add_data(pdev, data, sizeof(usba_data))) goto out_free_pdev; - if (data->vbus_pin >= 0) + if (gpio_is_valid(data->vbus_pin)) at32_select_gpio(data->vbus_pin, 0); usba0_pclk.dev = &pdev->dev; @@ -1980,11 +1995,14 @@ static struct clk atmel_ac97c0_pclk = { }; struct platform_device *__init -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags) { - struct platform_device *pdev; - struct ac97c_platform_data _data; - u32 pin_mask; + struct platform_device *pdev; + struct dw_dma_slave *rx_dws; + struct dw_dma_slave *tx_dws; + struct ac97c_platform_data _data; + u32 pin_mask; if (id != 0) return NULL; @@ -1995,37 +2013,52 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) if (platform_device_add_resources(pdev, atmel_ac97c0_resource, ARRAY_SIZE(atmel_ac97c0_resource))) - goto fail; + goto out_free_resources; if (!data) { data = &_data; memset(data, 0, sizeof(struct ac97c_platform_data)); - data->reset_pin = GPIO_PIN_NONE; + data->reset_pin = -ENODEV; } - data->dma_rx_periph_id = 3; - data->dma_tx_periph_id = 4; - data->dma_controller_id = 0; + rx_dws = &data->rx_dws; + tx_dws = &data->tx_dws; + + /* Check if DMA slave interface for capture should be configured. */ + if (flags & AC97C_CAPTURE) { + rx_dws->dma_dev = &dw_dmac0_device.dev; + rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; + rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); + rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + } + + /* Check if DMA slave interface for playback should be configured. */ + if (flags & AC97C_PLAYBACK) { + tx_dws->dma_dev = &dw_dmac0_device.dev; + tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; + tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); + tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + } if (platform_device_add_data(pdev, data, sizeof(struct ac97c_platform_data))) - goto fail; + goto out_free_resources; - pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */ - pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */ + /* SDO | SYNC | SCLK | SDI */ + pin_mask = (1 << 20) | (1 << 21) | (1 << 22) | (1 << 23); select_peripheral(PIOB, pin_mask, PERIPH_B, 0); - /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ - if (data->reset_pin != GPIO_PIN_NONE) - at32_select_gpio(data->reset_pin, 0); + if (gpio_is_valid(data->reset_pin)) + at32_select_gpio(data->reset_pin, AT32_GPIOF_OUTPUT + | AT32_GPIOF_HIGH); atmel_ac97c0_pclk.dev = &pdev->dev; platform_device_add(pdev); return pdev; -fail: +out_free_resources: platform_device_put(pdev); return NULL; } @@ -2053,21 +2086,34 @@ static struct clk abdac0_sample_clk = { .index = 6, }; -struct platform_device *__init at32_add_device_abdac(unsigned int id) +struct platform_device *__init +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) { - struct platform_device *pdev; - u32 pin_mask; + struct platform_device *pdev; + struct dw_dma_slave *dws; + u32 pin_mask; - if (id != 0) + if (id != 0 || !data) return NULL; - pdev = platform_device_alloc("abdac", id); + pdev = platform_device_alloc("atmel_abdac", id); if (!pdev) return NULL; if (platform_device_add_resources(pdev, abdac0_resource, ARRAY_SIZE(abdac0_resource))) - goto err_add_resources; + goto out_free_resources; + + dws = &data->dws; + + dws->dma_dev = &dw_dmac0_device.dev; + dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT; + dws->cfg_hi = DWC_CFGH_DST_PER(2); + dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + + if (platform_device_add_data(pdev, data, + sizeof(struct atmel_abdac_pdata))) + goto out_free_resources; pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */ pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */ @@ -2080,7 +2126,7 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id) platform_device_add(pdev); return pdev; -err_add_resources: +out_free_resources: platform_device_put(pdev); return NULL; } diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h index 5c4c971eed8e..b9222bf895bc 100644 --- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -171,25 +171,49 @@ ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) -#define ATMEL_LCDC_PRI_15B_DATA ( \ - ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ +#define ATMEL_LCDC_PRI_18B_DATA ( \ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ - ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ - ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \ - ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \ - ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20)) + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) -#define ATMEL_LCDC_ALT_15B_DATA ( \ - ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ +#define ATMEL_LCDC_ALT_18B_DATA ( \ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ - ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ - ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \ - ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \ - ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20)) + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_15B_DATA ( \ + ATMEL_LCDC(PC, DATA3) | ATMEL_LCDC(PC, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA11) | ATMEL_LCDC(PD, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20) | \ + ATMEL_LCDC(PD, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_15B_DATA ( \ + ATMEL_LCDC(PE, DATA3) | ATMEL_LCDC(PE, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA11) | ATMEL_LCDC(PE, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20) | \ + ATMEL_LCDC(PE, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) #define ATMEL_LCDC_PRI_CONTROL ( \ ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \ @@ -207,6 +231,10 @@ #define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA) +#define ATMEL_LCDC_PRI_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_18B_DATA) + +#define ATMEL_LCDC_ALT_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_18B_DATA) + #define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA) #define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index cff8e84f78f2..0b8164281899 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -13,7 +13,7 @@ * in this array is chip-dependent. */ extern unsigned long at32_board_osc_rates[]; - + /* * This used to add essential system devices, but this is now done * automatically. Please don't use it in new board code. @@ -26,12 +26,17 @@ static inline void __deprecated at32_add_system_devices(void) #define ATMEL_MAX_UART 4 extern struct platform_device *atmel_default_console_device; +/* Flags for selecting USART extra pins */ +#define ATMEL_USART_RTS 0x01 +#define ATMEL_USART_CTS 0x02 +#define ATMEL_USART_CLK 0x03 + struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ }; -void at32_map_usart(unsigned int hw_id, unsigned int line); +void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); struct eth_platform_data { @@ -88,16 +93,15 @@ struct mci_platform_data; struct platform_device * at32_add_device_mci(unsigned int id, struct mci_platform_data *data); -struct ac97c_platform_data { - unsigned short dma_rx_periph_id; - unsigned short dma_tx_periph_id; - unsigned short dma_controller_id; - int reset_pin; -}; +struct ac97c_platform_data; +struct platform_device * +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags); + +struct atmel_abdac_pdata; struct platform_device * -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data); +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data); -struct platform_device *at32_add_device_abdac(unsigned int id); struct platform_device *at32_add_device_psif(unsigned int id); struct cf_platform_data { diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c index ce4e4296b954..62d4abbaa654 100644 --- a/arch/avr32/mm/fault.c +++ b/arch/avr32/mm/fault.c @@ -250,21 +250,3 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access, dump_dtlb(); die("Bus Error", regs, SIGKILL); } - -/* - * This functionality is currently not possible to implement because - * we're using segmentation to ensure a fixed mapping of the kernel - * virtual address space. - * - * It would be possible to implement this, but it would require us to - * disable segmentation at startup and load the kernel mappings into - * the TLB like any other pages. There will be lots of trickery to - * avoid recursive invocation of the TLB miss handler, though... - */ -#ifdef CONFIG_DEBUG_PAGEALLOC -void kernel_map_pages(struct page *page, int numpages, int enable) -{ - -} -EXPORT_SYMBOL(kernel_map_pages); -#endif |