diff options
Diffstat (limited to 'arch/blackfin/include')
| -rw-r--r-- | arch/blackfin/include/asm/bfin6xx_spi.h | 258 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/bfin_ppi.h | 128 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/bfin_sport3.h | 107 |
3 files changed, 493 insertions, 0 deletions
diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin6xx_spi.h new file mode 100644 index 000000000000..89370b653dcd --- /dev/null +++ b/arch/blackfin/include/asm/bfin6xx_spi.h @@ -0,0 +1,258 @@ +/* + * Analog Devices SPI3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#include <linux/types.h> + +/* SPI_CONTROL */ +#define SPI_CTL_EN 0x00000001 /* Enable */ +#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ +#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ +#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ +#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ +#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ +#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ +#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ +#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ +#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ +#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ +#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ +#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ +#define SPI_CTL_LSBF 0x00001000 /* LSB First */ +#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ +#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ +#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ +#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ +#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ +#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ +#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ +#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ +#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ +#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ +#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ +#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ +#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ +/* SPI_RX_CONTROL */ +#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ +#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ +#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ +#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ +#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ +#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ +#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ +#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ +#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ +#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ +#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ +#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ +#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ +#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ +#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ +#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ +#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ +#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ +#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ +#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ +/* SPI_TX_CONTROL */ +#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ +#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ +#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ +#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ +#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ +#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ +#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ +#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ +#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ +#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ +#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ +#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ +#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ +#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ +#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ +#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ +#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ +#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ +#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ +#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ +/* SPI_CLOCK */ +#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ +/* SPI_DELAY */ +#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ +#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ +#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ +/* SPI_SSEL */ +#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ +#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ +#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ +#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ +#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ +#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ +#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ +#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ +#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ +#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ +#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ +#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ +#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ +#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ +/* SPI_RWC */ +#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ +/* SPI_RWCR */ +#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ +/* SPI_TWC */ +#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ +/* SPI_TWCR */ +#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ +/* SPI_IMASK */ +#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKCL */ +#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKST */ +#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_STATUS */ +#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ +#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ +#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ +#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ +#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ +#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ +#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ +#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ +#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ +#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ +#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ +#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ +#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ +#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ +#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ +#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ +#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ +#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ +#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ +#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ +#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ +#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ +#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ +/* SPI_ILAT */ +#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ +/* SPI_ILATCL */ +#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ + +/* + * bfin spi3 registers layout + */ +struct bfin_spi_regs { + u32 revid; + u32 control; + u32 rx_control; + u32 tx_control; + u32 clock; + u32 delay; + u32 ssel; + u32 rwc; + u32 rwcr; + u32 twc; + u32 twcr; + u32 reserved0; + u32 emask; + u32 emaskcl; + u32 emaskst; + u32 reserved1; + u32 status; + u32 elat; + u32 elatcl; + u32 reserved2; + u32 rfifo; + u32 reserved3; + u32 tfifo; +}; + +#define MAX_CTRL_CS 8 /* cs in spi controller */ + +/* device.platform_data for SSP controller devices */ +struct bfin6xx_spi_master { + u16 num_chipselect; + u16 pin_req[7]; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct bfin6xx_spi_chip { + u32 control; + u16 cs_chg_udelay; /* Some devices require 16-bit delays */ + u32 tx_dummy_val; /* tx value for rx only transfer */ + bool enable_dma; +}; + +#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/bfin_ppi.h b/arch/blackfin/include/asm/bfin_ppi.h index 3be05faa2c65..a4e872e16e75 100644 --- a/arch/blackfin/include/asm/bfin_ppi.h +++ b/arch/blackfin/include/asm/bfin_ppi.h @@ -10,6 +10,7 @@ #define __ASM_BFIN_PPI_H__ #include <linux/types.h> +#include <asm/blackfin.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -48,6 +49,133 @@ struct bfin_eppi_regs { u32 clip; }; +/* + * bfin eppi3 registers layout + */ +struct bfin_eppi3_regs { + u32 stat; + u32 hcnt; + u32 hdly; + u32 vcnt; + u32 vdly; + u32 frame; + u32 line; + u32 clkdiv; + u32 ctl; + u32 fs1_wlhb; + u32 fs1_paspl; + u32 fs2_wlvb; + u32 fs2_palpf; + u32 imsk; + u32 oddclip; + u32 evenclip; + u32 fs1_dly; + u32 fs2_dly; + u32 ctl2; +}; + #undef __BFP +#ifdef EPPI0_CTL2 +#define EPPI_STAT_CFIFOERR 0x00000001 /* Chroma FIFO Error */ +#define EPPI_STAT_YFIFOERR 0x00000002 /* Luma FIFO Error */ +#define EPPI_STAT_LTERROVR 0x00000004 /* Line Track Overflow */ +#define EPPI_STAT_LTERRUNDR 0x00000008 /* Line Track Underflow */ +#define EPPI_STAT_FTERROVR 0x00000010 /* Frame Track Overflow */ +#define EPPI_STAT_FTERRUNDR 0x00000020 /* Frame Track Underflow */ +#define EPPI_STAT_ERRNCOR 0x00000040 /* Preamble Error Not Corrected */ +#define EPPI_STAT_PXPERR 0x00000080 /* PxP Ready Error */ +#define EPPI_STAT_ERRDET 0x00004000 /* Preamble Error Detected */ +#define EPPI_STAT_FLD 0x00008000 /* Current Field Received by EPPI */ + +#define EPPI_HCNT_VALUE 0x0000FFFF /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */ + +#define EPPI_HDLY_VALUE 0x0000FFFF /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */ + +#define EPPI_VCNT_VALUE 0x0000FFFF /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */ + +#define EPPI_VDLY_VALUE 0x0000FFFF /* Number of lines to wait after the start of a new frame before starting to read/transmit data */ + +#define EPPI_FRAME_VALUE 0x0000FFFF /* Holds the number of lines expected per frame of data */ + +#define EPPI_LINE_VALUE 0x0000FFFF /* Holds the number of samples expected per line */ + +#define EPPI_CLKDIV_VALUE 0x0000FFFF /* Internal clock divider */ + +#define EPPI_CTL_EN 0x00000001 /* PPI Enable */ +#define EPPI_CTL_DIR 0x00000002 /* PPI Direction */ +#define EPPI_CTL_XFRTYPE 0x0000000C /* PPI Operating Mode */ +#define EPPI_CTL_ACTIVE656 0x00000000 /* XFRTYPE: ITU656 Active Video Only Mode */ +#define EPPI_CTL_ENTIRE656 0x00000004 /* XFRTYPE: ITU656 Entire Field Mode */ +#define EPPI_CTL_VERT656 0x00000008 /* XFRTYPE: ITU656 Vertical Blanking Only Mode */ +#define EPPI_CTL_NON656 0x0000000C /* XFRTYPE: Non-ITU656 Mode (GP Mode) */ +#define EPPI_CTL_FSCFG 0x00000030 /* Frame Sync Configuration */ +#define EPPI_CTL_SYNC0 0x00000000 /* FSCFG: Sync Mode 0 */ +#define EPPI_CTL_SYNC1 0x00000010 /* FSCFG: Sync Mode 1 */ +#define EPPI_CTL_SYNC2 0x00000020 /* FSCFG: Sync Mode 2 */ +#define EPPI_CTL_SYNC3 0x00000030 /* FSCFG: Sync Mode 3 */ +#define EPPI_CTL_FLDSEL 0x00000040 /* Field Select/Trigger */ +#define EPPI_CTL_ITUTYPE 0x00000080 /* ITU Interlace or Progressive */ +#define EPPI_CTL_BLANKGEN 0x00000100 /* ITU Output Mode with Internal Blanking Generation */ +#define EPPI_CTL_ICLKGEN 0x00000200 /* Internal Clock Generation */ +#define EPPI_CTL_IFSGEN 0x00000400 /* Internal Frame Sync Generation */ +#define EPPI_CTL_SIGNEXT 0x00000800 /* Sign Extension */ +#define EPPI_CTL_POLC 0x00003000 /* Frame Sync and Data Driving and Sampling Edges */ +#define EPPI_CTL_POLC0 0x00000000 /* POLC: Clock/Sync polarity mode 0 */ +#define EPPI_CTL_POLC1 0x00001000 /* POLC: Clock/Sync polarity mode 1 */ +#define EPPI_CTL_POLC2 0x00002000 /* POLC: Clock/Sync polarity mode 2 */ +#define EPPI_CTL_POLC3 0x00003000 /* POLC: Clock/Sync polarity mode 3 */ +#define EPPI_CTL_POLS 0x0000C000 /* Frame Sync Polarity */ +#define EPPI_CTL_FS1HI_FS2HI 0x00000000 /* POLS: FS1 and FS2 are active high */ +#define EPPI_CTL_FS1LO_FS2HI 0x00004000 /* POLS: FS1 is active low. FS2 is active high */ +#define EPPI_CTL_FS1HI_FS2LO 0x00008000 /* POLS: FS1 is active high. FS2 is active low */ +#define EPPI_CTL_FS1LO_FS2LO 0x0000C000 /* POLS: FS1 and FS2 are active low */ +#define EPPI_CTL_DLEN 0x00070000 /* Data Length */ +#define EPPI_CTL_DLEN08 0x00000000 /* DLEN: 8 bits */ +#define EPPI_CTL_DLEN10 0x00010000 /* DLEN: 10 bits */ +#define EPPI_CTL_DLEN12 0x00020000 /* DLEN: 12 bits */ +#define EPPI_CTL_DLEN14 0x00030000 /* DLEN: 14 bits */ +#define EPPI_CTL_DLEN16 0x00040000 /* DLEN: 16 bits */ +#define EPPI_CTL_DLEN18 0x00050000 /* DLEN: 18 bits */ +#define EPPI_CTL_DLEN20 0x00060000 /* DLEN: 20 bits */ +#define EPPI_CTL_DLEN24 0x00070000 /* DLEN: 24 bits */ +#define EPPI_CTL_DMIRR 0x00080000 /* Data Mirroring */ +#define EPPI_CTL_SKIPEN 0x00100000 /* Skip Enable */ +#define EPPI_CTL_SKIPEO 0x00200000 /* Skip Even or Odd */ +#define EPPI_CTL_PACKEN 0x00400000 /* Pack/Unpack Enable */ +#define EPPI_CTL_SWAPEN 0x00800000 /* Swap Enable */ +#define EPPI_CTL_SPLTEO 0x01000000 /* Split Even and Odd Data Samples */ +#define EPPI_CTL_SUBSPLTODD 0x02000000 /* Sub-Split Odd Samples */ +#define EPPI_CTL_SPLTWRD 0x04000000 /* Split Word */ +#define EPPI_CTL_RGBFMTEN 0x08000000 /* RGB Formatting Enable */ +#define EPPI_CTL_DMACFG 0x10000000 /* One or Two DMA Channels Mode */ +#define EPPI_CTL_DMAFINEN 0x20000000 /* DMA Finish Enable */ +#define EPPI_CTL_MUXSEL 0x40000000 /* MUX Select */ +#define EPPI_CTL_CLKGATEN 0x80000000 /* Clock Gating Enable */ + +#define EPPI_FS2_WLVB_F2VBAD 0xFF000000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */ +#define EPPI_FS2_WLVB_F2VBBD 0x00FF0000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking before field 2 */ +#define EPPI_FS2_WLVB_F1VBAD 0x0000FF00 /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */ +#define EPPI_FS2_WLVB_F1VBBD 0x000000FF /* In GP 2, or 3 FS modes used to generate PPIx_FS2 width (32-bit). In GP Transmit mode, with BLANKGEN=1, contains the number of lines of Vertical blanking before field 1. */ + +#define EPPI_FS2_PALPF_F2ACT 0xFFFF0000 /* Number of lines of Active Data in Field 2 */ +#define EPPI_FS2_PALPF_F1ACT 0x0000FFFF /* Number of lines of Active Data in Field 1 */ + +#define EPPI_IMSK_CFIFOERR 0x00000001 /* Mask CFIFO Underflow or Overflow Error Interrupt */ +#define EPPI_IMSK_YFIFOERR 0x00000002 /* Mask YFIFO Underflow or Overflow Error Interrupt */ +#define EPPI_IMSK_LTERROVR 0x00000004 /* Mask Line Track Overflow Error Interrupt */ +#define EPPI_IMSK_LTERRUNDR 0x00000008 /* Mask Line Track Underflow Error Interrupt */ +#define EPPI_IMSK_FTERROVR 0x00000010 /* Mask Frame Track Overflow Error Interrupt */ +#define EPPI_IMSK_FTERRUNDR 0x00000020 /* Mask Frame Track Underflow Error Interrupt */ +#define EPPI_IMSK_ERRNCOR 0x00000040 /* Mask ITU Preamble Error Not Corrected Interrupt */ +#define EPPI_IMSK_PXPERR 0x00000080 /* Mask PxP Ready Error Interrupt */ + +#define EPPI_ODDCLIP_HIGHODD 0xFFFF0000 +#define EPPI_ODDCLIP_LOWODD 0x0000FFFF + +#define EPPI_EVENCLIP_HIGHEVEN 0xFFFF0000 +#define EPPI_EVENCLIP_LOWEVEN 0x0000FFFF + +#define EPPI_CTL2_FS1FINEN 0x00000002 /* HSYNC Finish Enable */ +#endif #endif diff --git a/arch/blackfin/include/asm/bfin_sport3.h b/arch/blackfin/include/asm/bfin_sport3.h new file mode 100644 index 000000000000..03c00220d69b --- /dev/null +++ b/arch/blackfin/include/asm/bfin_sport3.h @@ -0,0 +1,107 @@ +/* + * bfin_sport - Analog Devices BF6XX SPORT registers + * + * Copyright (c) 2012 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BFIN_SPORT3_H_ +#define _BFIN_SPORT3_H_ + +#include <linux/types.h> + +#define SPORT_CTL_SPENPRI 0x00000001 /* Enable Primary Channel */ +#define SPORT_CTL_DTYPE 0x00000006 /* Data type select */ +#define SPORT_CTL_RJUSTIFY_ZFILL 0x00000000 /* DTYPE: MCM mode: Right-justify, zero-fill unused MSBs */ +#define SPORT_CTL_RJUSTIFY_SFILL 0x00000002 /* DTYPE: MCM mode: Right-justify, sign-extend unused MSBs */ +#define SPORT_CTL_USE_U_LAW 0x00000004 /* DTYPE: MCM mode: Compand using u-law */ +#define SPORT_CTL_USE_A_LAW 0x00000006 /* DTYPE: MCM mode: Compand using A-law */ +#define SPORT_CTL_LSBF 0x00000008 /* Serial bit endian select */ +#define SPORT_CTL_SLEN 0x000001F0 /* Serial Word length select */ +#define SPORT_CTL_PACK 0x00000200 /* 16-bit to 32-bit packing enable */ +#define SPORT_CTL_ICLK 0x00000400 /* Internal Clock Select */ +#define SPORT_CTL_OPMODE 0x00000800 /* Operation mode */ +#define SPORT_CTL_CKRE 0x00001000 /* Clock rising edge select */ +#define SPORT_CTL_FSR 0x00002000 /* Frame Sync required */ +#define SPORT_CTL_IFS 0x00004000 /* Internal Frame Sync select */ +#define SPORT_CTL_DIFS 0x00008000 /* Data-independent frame sync select */ +#define SPORT_CTL_LFS 0x00010000 /* Active low frame sync select */ +#define SPORT_CTL_LAFS 0x00020000 /* Late Transmit frame select */ +#define SPORT_CTL_RJUST 0x00040000 /* Right Justified mode select */ +#define SPORT_CTL_FSED 0x00080000 /* External frame sync edge select */ +#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrrupt enable select */ +#define SPORT_CTL_GCLKEN 0x00200000 /* Gated clock mode select */ +#define SPORT_CTL_SPENSEC 0x01000000 /* Enable secondary channel */ +#define SPORT_CTL_SPTRAN 0x02000000 /* Data direction control */ +#define SPORT_CTL_DERRSEC 0x04000000 /* Secondary channel error status */ +#define SPORT_CTL_DXSSEC 0x18000000 /* Secondary channel data buffer status */ +#define SPORT_CTL_SEC_EMPTY 0x00000000 /* DXSSEC: Empty */ +#define SPORT_CTL_SEC_PART_FULL 0x10000000 /* DXSSEC: Partially full */ +#define SPORT_CTL_SEC_FULL 0x18000000 /* DXSSEC: Full */ +#define SPORT_CTL_DERRPRI 0x20000000 /* Primary channel error status */ +#define SPORT_CTL_DXSPRI 0xC0000000 /* Primary channel data buffer status */ +#define SPORT_CTL_PRM_EMPTY 0x00000000 /* DXSPRI: Empty */ +#define SPORT_CTL_PRM_PART_FULL 0x80000000 /* DXSPRI: Partially full */ +#define SPORT_CTL_PRM_FULL 0xC0000000 /* DXSPRI: Full */ + +#define SPORT_DIV_CLKDIV 0x0000FFFF /* Clock divisor */ +#define SPORT_DIV_FSDIV 0xFFFF0000 /* Frame sync divisor */ + +#define SPORT_MCTL_MCE 0x00000001 /* Multichannel enable */ +#define SPORT_MCTL_MCPDE 0x00000004 /* Multichannel data packing select */ +#define SPORT_MCTL_MFD 0x000000F0 /* Multichannel frame delay */ +#define SPORT_MCTL_WSIZE 0x00007F00 /* Number of multichannel slots */ +#define SPORT_MCTL_WOFFSET 0x03FF0000 /* Window offset size */ + +#define SPORT_CNT_CLKCNT 0x0000FFFF /* Current state of clk div counter */ +#define SPORT_CNT_FSDIVCNT 0xFFFF0000 /* Current state of frame div counter */ + +#define SPORT_ERR_DERRPMSK 0x00000001 /* Primary channel data error interrupt enable */ +#define SPORT_ERR_DERRSMSK 0x00000002 /* Secondary channel data error interrupt enable */ +#define SPORT_ERR_FSERRMSK 0x00000004 /* Frame sync error interrupt enable */ +#define SPORT_ERR_DERRPSTAT 0x00000010 /* Primary channel data error status */ +#define SPORT_ERR_DERRSSTAT 0x00000020 /* Secondary channel data error status */ +#define SPORT_ERR_FSERRSTAT 0x00000040 /* Frame sync error status */ + +#define SPORT_MSTAT_CURCHAN 0x000003FF /* Channel which is being serviced in the multichannel operation */ + +#define SPORT_CTL2_FSMUXSEL 0x00000001 /* Frame Sync MUX Select */ +#define SPORT_CTL2_CKMUXSEL 0x00000002 /* Clock MUX Select */ +#define SPORT_CTL2_LBSEL 0x00000004 /* Loopback Select */ + +struct sport_register { + u32 spctl; + u32 div; + u32 spmctl; + u32 spcs0; + u32 spcs1; + u32 spcs2; + u32 spcs3; + u32 spcnt; + u32 sperrctl; + u32 spmstat; + u32 spctl2; + u32 txa; + u32 rxa; + u32 txb; + u32 rxb; + u32 revid; +}; + +struct bfin_snd_platform_data { + const unsigned short *pin_req; +}; + +#endif |