1 files changed, 0 insertions, 115 deletions
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
deleted file mode 100644
index c4f50a328501..000000000000
--- a/arch/blackfin/kernel/reboot.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/blackfin/kernel/reboot.c - handle shutdown/reboot
- *
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/interrupt.h>
-#include <asm/bfin-global.h>
-#include <asm/reboot.h>
-#include <asm/bfrom.h>
-
-/* A system soft reset makes external memory unusable so force
- * this function into L1.  We use the compiler ssync here rather
- * than SSYNC() because it's safe (no interrupts and such) and
- * we save some L1.  We do not need to force sanity in the SYSCR
- * register as the BMODE selection bit is cleared by the soft
- * reset while the Core B bit (on dual core parts) is cleared by
- * the core reset.
- */
-__attribute__ ((__l1_text__, __noreturn__))
-static void bfin_reset(void)
-{
-#ifndef CONFIG_BF60x
-	if (!ANOMALY_05000353 && !ANOMALY_05000386)
-		bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20));
-
-	/* Wait for completion of "system" events such as cache line
-	 * line fills so that we avoid infinite stalls later on as
-	 * much as possible.  This code is in L1, so it won't trigger
-	 * any such event after this point in time.
-	 */
-	__builtin_bfin_ssync();
-
-	/* Initiate System software reset. */
-	bfin_write_SWRST(0x7);
-
-	/* Due to the way reset is handled in the hardware, we need
-	 * to delay for 10 SCLKS.  The only reliable way to do this is
-	 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
-	 * we'll assume worse case which is a 1:15 ratio.
-	 */
-	asm(
-		"LSETUP (1f, 1f) LC0 = %0\n"
-		"1: nop;"
-		:
-		: "a" (15 * 10)
-		: "LC0", "LB0", "LT0"
-	);
-
-	/* Clear System software reset */
-	bfin_write_SWRST(0);
-
-	/* The BF526 ROM will crash during reset */
-#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
-	/* Seems to be fixed with newer parts though ... */
-	if (__SILICON_REVISION__ < 1 && bfin_revid() < 1)
-		bfin_read_SWRST();
-#endif
-	/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
-	 * though as the System state is all reset now.
-	 */
-	asm(
-		"LSETUP (1f, 1f) LC1 = %0\n"
-		"1: nop;"
-		:
-		: "a" (15 * 1)
-		: "LC1", "LB1", "LT1"
-	);
-
-	while (1)
-		/* Issue core reset */
-		asm("raise 1");
-#else
-	while (1)
-		bfin_write_RCU0_CTL(0x1);
-#endif
-}
-
-__attribute__((weak))
-void native_machine_restart(char *cmd)
-{
-}
-
-void machine_restart(char *cmd)
-{
-	native_machine_restart(cmd);
-	if (smp_processor_id())
-		smp_call_function((void *)bfin_reset, 0, 1);
-	else
-		bfin_reset();
-}
-
-__attribute__((weak))
-void native_machine_halt(void)
-{
-	idle_with_irq_disabled();
-}
-
-void machine_halt(void)
-{
-	native_machine_halt();
-}
-
-__attribute__((weak))
-void native_machine_power_off(void)
-{
-	idle_with_irq_disabled();
-}
-
-void machine_power_off(void)
-{
-	native_machine_power_off();
-}