summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf537/boards/stamp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf537/boards/stamp.c')
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c597
1 files changed, 514 insertions, 83 deletions
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 68a27bccc7d4..c9e0e85629bf 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -35,12 +35,10 @@
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#ifdef CONFIG_REGULATOR_ADP_SWITCH
-#include <linux/regulator/adp_switch.h>
-#endif
-#ifdef CONFIG_REGULATOR_AD5398
-#include <linux/regulator/ad5398.h>
+#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
+#include <linux/regulator/fixed.h>
#endif
+#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/userspace-consumer.h>
@@ -264,7 +262,7 @@ static struct resource isp1362_hcd_resources[] = {
}, {
.start = IRQ_PF3,
.end = IRQ_PF3,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -418,7 +416,7 @@ static struct platform_nand_data bfin_plat_nand_data = {
static struct resource bfin_plat_nand_resources = {
.start = 0x20212000,
.end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device bfin_async_nand_device = {
@@ -545,6 +543,14 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
};
#endif
+#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) \
+ || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
+static struct bfin5xx_spi_chip adav801_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
#include <linux/input/ad714x.h>
static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
@@ -693,6 +699,65 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
};
#endif
+#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+static unsigned short ad7816_platform_data[] = {
+ GPIO_PF4, /* rdwr_pin */
+ GPIO_PF5, /* convert_pin */
+ GPIO_PF7, /* busy_pin */
+ 0,
+};
+
+static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+static unsigned long adt7310_platform_data[3] = {
+/* INT bound temperature alarm event. line 1 */
+ IRQ_PG4, IRQF_TRIGGER_LOW,
+/* CT bound temperature alarm event irq_flags. line 0 */
+ IRQF_TRIGGER_LOW,
+};
+
+static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+static unsigned short ad7298_platform_data[] = {
+ GPIO_PF7, /* busy_pin */
+ 0,
+};
+
+static struct bfin5xx_spi_chip ad7298_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+static unsigned long adt7316_spi_data[2] = {
+ IRQF_TRIGGER_LOW, /* interrupt flags */
+ GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
+};
+
+static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
@@ -824,14 +889,12 @@ static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
.enable_dma = 1,
.bits_per_word = 8,
- .cs_gpio = GPIO_PF10,
};
#endif
#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
static struct bfin5xx_spi_chip adf7021_spi_chip_info = {
.bits_per_word = 16,
- .cs_gpio = GPIO_PF10,
};
#include <linux/spi/adf702x.h>
@@ -938,6 +1001,13 @@ static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
};
#endif
+#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
+static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -982,7 +1052,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+ .chip_select = 4,
.platform_data = "ad1836", /* only includes chip name for the moment */
.controller_data = &ad1836_spi_chip_info,
.mode = SPI_MODE_3,
@@ -1000,6 +1070,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
+#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
+ {
+ .modalias = "adav80x",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &adav801_spi_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
{
.modalias = "ad714x_captouch",
@@ -1018,6 +1099,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "ad2s90",
.bus_num = 0,
.chip_select = 3, /* change it for your board */
+ .mode = SPI_MODE_3,
.platform_data = NULL,
.controller_data = &ad2s90_spi_chip_info,
},
@@ -1044,6 +1126,67 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
+#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+ {
+ .modalias = "ad7314",
+ .max_speed_hz = 1000000,
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .controller_data = &ad7314_spi_chip_info,
+ .mode = SPI_MODE_1,
+ },
+#endif
+
+#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+ {
+ .modalias = "ad7818",
+ .max_speed_hz = 1000000,
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .platform_data = ad7816_platform_data,
+ .controller_data = &ad7816_spi_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+ {
+ .modalias = "adt7310",
+ .max_speed_hz = 1000000,
+ .irq = IRQ_PG5, /* CT alarm event. Line 0 */
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .platform_data = adt7310_platform_data,
+ .controller_data = &adt7310_spi_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+ {
+ .modalias = "ad7298",
+ .max_speed_hz = 1000000,
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .platform_data = ad7298_platform_data,
+ .controller_data = &ad7298_spi_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+ {
+ .modalias = "adt7316",
+ .max_speed_hz = 1000000,
+ .irq = IRQ_PG5, /* interrupt line */
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .platform_data = adt7316_spi_data,
+ .controller_data = &adt7316_spi_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "mmc_spi",
@@ -1103,7 +1246,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF6,
.bus_num = 0,
- .chip_select = 0, /* GPIO controlled SSEL */
+ .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
.controller_data = &enc28j60_spi_chip_info,
.mode = SPI_MODE_0,
},
@@ -1125,7 +1268,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "adf702x",
.max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0, /* GPIO controlled SSEL */
+ .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
.controller_data = &adf7021_spi_chip_info,
.platform_data = &adf7021_platform_data,
.mode = SPI_MODE_0,
@@ -1143,12 +1286,239 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
+#if defined(CONFIG_AD7476) \
+ || defined(CONFIG_AD7476_MODULE)
+ {
+ .modalias = "ad7476", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_ad7476_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_ADE7753) \
+ || defined(CONFIG_ADE7753_MODULE)
+ {
+ .modalias = "ade7753",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_1,
+ },
+#endif
+#if defined(CONFIG_ADE7754) \
+ || defined(CONFIG_ADE7754_MODULE)
+ {
+ .modalias = "ade7754",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_1,
+ },
+#endif
+#if defined(CONFIG_ADE7758) \
+ || defined(CONFIG_ADE7758_MODULE)
+ {
+ .modalias = "ade7758",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_1,
+ },
+#endif
+#if defined(CONFIG_ADE7759) \
+ || defined(CONFIG_ADE7759_MODULE)
+ {
+ .modalias = "ade7759",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_1,
+ },
+#endif
+#if defined(CONFIG_ADE7854_SPI) \
+ || defined(CONFIG_ADE7854_SPI_MODULE)
+ {
+ .modalias = "ade7854",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_ADIS16060) \
+ || defined(CONFIG_ADIS16060_MODULE)
+ {
+ .modalias = "adis16060_r",
+ .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_0,
+ },
+ {
+ .modalias = "adis16060_w",
+ .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2, /* CS for write, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_1,
+ },
+#endif
+#if defined(CONFIG_ADIS16130) \
+ || defined(CONFIG_ADIS16130_MODULE)
+ {
+ .modalias = "adis16130",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS for read, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_ADIS16201) \
+ || defined(CONFIG_ADIS16201_MODULE)
+ {
+ .modalias = "adis16201",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16203) \
+ || defined(CONFIG_ADIS16203_MODULE)
+ {
+ .modalias = "adis16203",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16204) \
+ || defined(CONFIG_ADIS16204_MODULE)
+ {
+ .modalias = "adis16204",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16209) \
+ || defined(CONFIG_ADIS16209_MODULE)
+ {
+ .modalias = "adis16209",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16220) \
+ || defined(CONFIG_ADIS16220_MODULE)
+ {
+ .modalias = "adis16220",
+ .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16240) \
+ || defined(CONFIG_ADIS16240_MODULE)
+ {
+ .modalias = "adis16240",
+ .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16260) \
+ || defined(CONFIG_ADIS16260_MODULE)
+ {
+ .modalias = "adis16260",
+ .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16261) \
+ || defined(CONFIG_ADIS16261_MODULE)
+ {
+ .modalias = "adis16261",
+ .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_ADIS16300) \
+ || defined(CONFIG_ADIS16300_MODULE)
+ {
+ .modalias = "adis16300",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16350) \
+ || defined(CONFIG_ADIS16350_MODULE)
+ {
+ .modalias = "adis16364",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ .irq = IRQ_PF4,
+ },
+#endif
+#if defined(CONFIG_ADIS16400) \
+ || defined(CONFIG_ADIS16400_MODULE)
+ {
+ .modalias = "adis16400",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1, /* CS, change it for your board */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .mode = SPI_MODE_3,
+ },
+#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
- .num_chipselect = 8,
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.enable_dma = 1, /* master has the ability to do dma transfer */
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
@@ -1773,12 +2143,6 @@ static struct regulator_init_data ad5398_regulator_data = {
.consumer_supplies = &ad5398_consumer,
};
-static struct ad5398_platform_data ad5398_i2c_platform_data = {
- .current_bits = 10,
- .current_offset = 4,
- .regulator_data = &ad5398_regulator_data,
-};
-
#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
static struct platform_device ad5398_virt_consumer_device = {
@@ -1811,7 +2175,34 @@ static struct platform_device ad5398_userspace_consumer_device = {
#endif
#endif
+#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+/* INT bound temperature alarm event. line 1 */
+static unsigned long adt7410_platform_data[2] = {
+ IRQ_PG4, IRQF_TRIGGER_LOW,
+};
+#endif
+
+#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+/* INT bound temperature alarm event. line 1 */
+static unsigned long adt7316_i2c_data[2] = {
+ IRQF_TRIGGER_LOW, /* interrupt flags */
+ GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
+};
+#endif
+
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
+ {
+ I2C_BOARD_INFO("ad1937", 0x04),
+ },
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
+ {
+ I2C_BOARD_INFO("adav803", 0x10),
+ },
+#endif
+
#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
{
I2C_BOARD_INFO("ad7142_captouch", 0x2C),
@@ -1843,12 +2234,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
{
I2C_BOARD_INFO("ad7414", 0x9),
.irq = IRQ_PG5,
- /*
- * platform_data pointer is borrwoed by the driver to
- * store custimer defined IRQ ALART level mode.
- * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
- */
- .platform_data = (void *)IRQF_TRIGGER_LOW,
+ .irq_flags = IRQF_TRIGGER_LOW,
},
#endif
@@ -1856,12 +2242,56 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
{
I2C_BOARD_INFO("ad7417", 0xb),
.irq = IRQ_PG5,
- /*
- * platform_data pointer is borrwoed by the driver to
- * store custimer defined IRQ ALART level mode.
- * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
- */
- .platform_data = (void *)IRQF_TRIGGER_LOW,
+ .irq_flags = IRQF_TRIGGER_LOW,
+ .platform_data = (void *)GPIO_PF4,
+ },
+#endif
+
+#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
+ {
+ I2C_BOARD_INFO("ade7854", 0x38),
+ },
+#endif
+
+#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
+ {
+ I2C_BOARD_INFO("adt75", 0x9),
+ .irq = IRQ_PG5,
+ .irq_flags = IRQF_TRIGGER_LOW,
+ },
+#endif
+
+#if defined(CONFIG_ADT7408) || defined(CONFIG_ADT7408_MODULE)
+ {
+ I2C_BOARD_INFO("adt7408", 0x18),
+ .irq = IRQ_PG5,
+ .irq_flags = IRQF_TRIGGER_LOW,
+ },
+#endif
+
+#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+ {
+ I2C_BOARD_INFO("adt7410", 0x48),
+ /* CT critical temperature event. line 0 */
+ .irq = IRQ_PG5,
+ .irq_flags = IRQF_TRIGGER_LOW,
+ .platform_data = (void *)&adt7410_platform_data,
+ },
+#endif
+
+#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
+ {
+ I2C_BOARD_INFO("ad7291", 0x20),
+ .irq = IRQ_PG5,
+ .irq_flags = IRQF_TRIGGER_LOW,
+ },
+#endif
+
+#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+ {
+ I2C_BOARD_INFO("adt7316", 0x48),
+ .irq = IRQ_PG6,
+ .platform_data = (void *)&adt7316_i2c_data,
},
#endif
@@ -1917,7 +2347,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
{
- I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C),
+ I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
},
#endif
#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
@@ -1954,7 +2384,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
{
I2C_BOARD_INFO("ad5398", 0xC),
- .platform_data = (void *)&ad5398_i2c_platform_data,
+ .platform_data = (void *)&ad5398_regulator_data,
},
#endif
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
@@ -1963,6 +2393,16 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.platform_data = (void *)&adp8860_pdata,
},
#endif
+#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
+ {
+ I2C_BOARD_INFO("adau1373", 0x1A),
+ },
+#endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+ {
+ I2C_BOARD_INFO("ad5252", 0x2e),
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -2147,50 +2587,38 @@ static struct platform_device bfin_ac97 = {
};
#endif
-#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
-#define REGULATOR_ADP122 "adp122"
-#define REGULATOR_ADP150 "adp150"
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+#define REGULATOR_ADP122 "adp122"
+#define REGULATOR_ADP122_UV 2500000
static struct regulator_consumer_supply adp122_consumers = {
.supply = REGULATOR_ADP122,
};
-static struct regulator_consumer_supply adp150_consumers = {
- .supply = REGULATOR_ADP150,
-};
-
-static struct regulator_init_data adp_switch_regulator_data[] = {
- {
- .constraints = {
- .name = REGULATOR_ADP122,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .min_uA = 0,
- .max_uA = 300000,
- },
- .num_consumer_supplies = 1, /* only 1 */
- .consumer_supplies = &adp122_consumers,
- .driver_data = (void *)GPIO_PF2, /* gpio port only */
- },
- {
- .constraints = {
- .name = REGULATOR_ADP150,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .min_uA = 0,
- .max_uA = 150000,
- },
- .num_consumer_supplies = 1, /* only 1 */
- .consumer_supplies = &adp150_consumers,
- .driver_data = (void *)GPIO_PF3, /* gpio port only */
+static struct regulator_init_data adp_switch_regulator_data = {
+ .constraints = {
+ .name = REGULATOR_ADP122,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .min_uV = REGULATOR_ADP122_UV,
+ .max_uV = REGULATOR_ADP122_UV,
+ .min_uA = 0,
+ .max_uA = 300000,
},
+ .num_consumer_supplies = 1, /* only 1 */
+ .consumer_supplies = &adp122_consumers,
};
-static struct adp_switch_platform_data adp_switch_pdata = {
- .regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
- .regulator_data = adp_switch_regulator_data,
+static struct fixed_voltage_config adp_switch_pdata = {
+ .supply_name = REGULATOR_ADP122,
+ .microvolts = REGULATOR_ADP122_UV,
+ .gpio = GPIO_PF2,
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &adp_switch_regulator_data,
};
static struct platform_device adp_switch_device = {
- .name = "adp_switch",
+ .name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &adp_switch_pdata,
@@ -2216,27 +2644,26 @@ static struct platform_device adp122_userspace_consumer_device = {
.platform_data = &adp122_userspace_comsumer_data,
},
};
+#endif
+#endif
-static struct regulator_bulk_data adp150_bulk_data = {
- .supply = REGULATOR_ADP150,
-};
+#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
+ defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
-static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
- .name = REGULATOR_ADP150,
- .num_supplies = 1,
- .supplies = &adp150_bulk_data,
+static struct resource iio_gpio_trigger_resources[] = {
+ [0] = {
+ .start = IRQ_PF5,
+ .end = IRQ_PF5,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
};
-static struct platform_device adp150_userspace_consumer_device = {
- .name = "reg-userspace-consumer",
- .id = 1,
- .dev = {
- .platform_data = &adp150_userspace_comsumer_data,
- },
+static struct platform_device iio_gpio_trigger = {
+ .name = "iio_gpio_trigger",
+ .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
+ .resource = iio_gpio_trigger_resources,
};
#endif
-#endif
-
static struct platform_device *stamp_devices[] __initdata = {
@@ -2369,14 +2796,18 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
&adp_switch_device,
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
&adp122_userspace_consumer_device,
- &adp150_userspace_consumer_device,
#endif
#endif
+
+#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
+ defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
+ &iio_gpio_trigger,
+#endif
};
static int __init stamp_init(void)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 01:06:36 +0100