diff options
Diffstat (limited to 'arch/frv/kernel/irq.c')
| -rw-r--r-- | arch/frv/kernel/irq.c | 750 |
1 files changed, 113 insertions, 637 deletions
diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c index 08967010be04..e1ab9f2e43fb 100644 --- a/arch/frv/kernel/irq.c +++ b/arch/frv/kernel/irq.c @@ -1,6 +1,6 @@ /* irq.c: FRV IRQ handling * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -9,13 +9,6 @@ * 2 of the License, or (at your option) any later version. */ -/* - * (mostly architecture independent, will move to kernel/irq.c in 2.5.) - * - * IRQs are in fact implemented a bit like signal handlers for the kernel. - * Naturally it's not a 1:1 relation, but there are similarities. - */ - #include <linux/ptrace.h> #include <linux/errno.h> #include <linux/signal.h> @@ -43,19 +36,16 @@ #include <asm/delay.h> #include <asm/irq.h> #include <asm/irc-regs.h> -#include <asm/irq-routing.h> #include <asm/gdb-stub.h> -extern void __init fpga_init(void); -extern void __init route_mb93493_irqs(void); - -static void register_irq_proc (unsigned int irq); +#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16)) -/* - * Special irq handlers. - */ +extern void __init fpga_init(void); +#ifdef CONFIG_FUJITSU_MB93493 +extern void __init mb93493_init(void); +#endif -irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) { return IRQ_HANDLED; } +#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR)) atomic_t irq_err_count; @@ -64,215 +54,99 @@ atomic_t irq_err_count; */ int show_interrupts(struct seq_file *p, void *v) { - struct irqaction *action; - struct irq_group *group; + int i = *(loff_t *) v, cpu; + struct irqaction * action; unsigned long flags; - int level, grp, ix, i, j; - - i = *(loff_t *) v; - - switch (i) { - case 0: - seq_printf(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%d ",j); - - seq_putc(p, '\n'); - break; - case 1 ... NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP: - local_irq_save(flags); - - grp = (i - 1) / NR_IRQ_ACTIONS_PER_GROUP; - group = irq_groups[grp]; - if (!group) - goto skip; - - ix = (i - 1) % NR_IRQ_ACTIONS_PER_GROUP; - action = group->actions[ix]; - if (!action) - goto skip; - - seq_printf(p, "%3d: ", i - 1); - -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i - 1]); -#endif - - level = group->sources[ix]->level - frv_irq_levels; - - seq_printf(p, " %12s@%x", group->sources[ix]->muxname, level); - seq_printf(p, " %s", action->name); - - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); + if (i == 0) { + char cpuname[12]; + seq_printf(p, " "); + for_each_present_cpu(cpu) { + sprintf(cpuname, "CPU%d", cpu); + seq_printf(p, " %10s", cpuname); + } seq_putc(p, '\n'); -skip: - local_irq_restore(flags); - break; + } - case NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP + 1: - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); - break; + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (action) { + seq_printf(p, "%3d: ", i); + for_each_present_cpu(cpu) + seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]); + seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-"); + seq_printf(p, " %s", action->name); + for (action = action->next; + action; + action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); + } - default: - break; + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); } return 0; } - /* - * Generic enable/disable code: this just calls - * down into the PIC-specific version for the actual - * hardware disable after having gotten the irq - * controller lock. + * on-CPU PIC operations */ - -/** - * disable_irq_nosync - disable an irq without waiting - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables and Enables are - * nested. - * Unlike disable_irq(), this function does not ensure existing - * instances of the IRQ handler have completed before returning. - * - * This function may be called from IRQ context. - */ - -void disable_irq_nosync(unsigned int irq) +static void frv_cpupic_enable(unsigned int irqlevel) { - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - unsigned long flags; - int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1); - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[idx]; - if (!source) - BUG(); - - level = source->level; - - spin_lock_irqsave(&level->lock, flags); - - if (group->control) { - if (!group->disable_cnt[idx]++) - group->control(group, idx, 0); - } else if (!level->disable_count++) { - __set_MASK(level - frv_irq_levels); - } - - spin_unlock_irqrestore(&level->lock, flags); + __clr_MASK(irqlevel); } -EXPORT_SYMBOL(disable_irq_nosync); - -/** - * disable_irq - disable an irq and wait for completion - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Enables and Disables are - * nested. - * This function waits for any pending IRQ handlers for this interrupt - * to complete before returning. If you use this function while - * holding a resource the IRQ handler may need you will deadlock. - * - * This function may be called - with care - from IRQ context. - */ - -void disable_irq(unsigned int irq) +static void frv_cpupic_disable(unsigned int irqlevel) { - disable_irq_nosync(irq); - -#ifdef CONFIG_SMP - if (!local_irq_count(smp_processor_id())) { - do { - barrier(); - } while (irq_desc[irq].status & IRQ_INPROGRESS); - } -#endif + __set_MASK(irqlevel); } -EXPORT_SYMBOL(disable_irq); - -/** - * enable_irq - enable handling of an irq - * @irq: Interrupt to enable - * - * Undoes the effect of one call to disable_irq(). If this - * matches the last disable, processing of interrupts on this - * IRQ line is re-enabled. - * - * This function may be called from IRQ context. - */ - -void enable_irq(unsigned int irq) +static void frv_cpupic_ack(unsigned int irqlevel) { - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - unsigned long flags; - int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1); - int count; - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[idx]; - if (!source) - BUG(); - - level = source->level; - - spin_lock_irqsave(&level->lock, flags); - - if (group->control) - count = group->disable_cnt[idx]; - else - count = level->disable_count; - - switch (count) { - case 1: - if (group->control) { - if (group->actions[idx]) - group->control(group, idx, 1); - } else { - if (level->usage) - __clr_MASK(level - frv_irq_levels); - } - /* fall-through */ + __set_MASK(irqlevel); + __clr_RC(irqlevel); + __clr_IRL(); +} - default: - count--; - break; +static void frv_cpupic_mask(unsigned int irqlevel) +{ + __set_MASK(irqlevel); +} - case 0: - printk("enable_irq(%u) unbalanced from %p\n", irq, __builtin_return_address(0)); - } +static void frv_cpupic_mask_ack(unsigned int irqlevel) +{ + __set_MASK(irqlevel); + __clr_RC(irqlevel); + __clr_IRL(); +} - if (group->control) - group->disable_cnt[idx] = count; - else - level->disable_count = count; +static void frv_cpupic_unmask(unsigned int irqlevel) +{ + __clr_MASK(irqlevel); +} - spin_unlock_irqrestore(&level->lock, flags); +static void frv_cpupic_end(unsigned int irqlevel) +{ + __clr_MASK(irqlevel); } -EXPORT_SYMBOL(enable_irq); +static struct irq_chip frv_cpu_pic = { + .name = "cpu", + .enable = frv_cpupic_enable, + .disable = frv_cpupic_disable, + .ack = frv_cpupic_ack, + .mask = frv_cpupic_mask, + .mask_ack = frv_cpupic_mask_ack, + .unmask = frv_cpupic_unmask, + .end = frv_cpupic_end, +}; -/*****************************************************************************/ /* * handles all normal device IRQ's * - registers are referred to by the __frame variable (GR28) @@ -281,463 +155,65 @@ EXPORT_SYMBOL(enable_irq); */ asmlinkage void do_IRQ(void) { - struct irq_source *source; - int level, cpu; - irq_enter(); - - level = (__frame->tbr >> 4) & 0xf; - cpu = smp_processor_id(); - - if ((unsigned long) __frame - (unsigned long) (current + 1) < 512) - BUG(); - - __set_MASK(level); - __clr_RC(level); - __clr_IRL(); - - kstat_this_cpu.irqs[level]++; - - for (source = frv_irq_levels[level].sources; source; source = source->next) - source->doirq(source); - - __clr_MASK(level); - + __do_IRQ(__get_IRL(), __frame); irq_exit(); +} -} /* end do_IRQ() */ - -/*****************************************************************************/ /* * handles all NMIs when not co-opted by the debugger * - registers are referred to by the __frame variable (GR28) */ asmlinkage void do_NMI(void) { -} /* end do_NMI() */ - -/*****************************************************************************/ -/** - * request_irq - allocate an interrupt line - * @irq: Interrupt line to allocate - * @handler: Function to be called when the IRQ occurs - * @irqflags: Interrupt type flags - * @devname: An ascii name for the claiming device - * @dev_id: A cookie passed back to the handler function - * - * This call allocates interrupt resources and enables the - * interrupt line and IRQ handling. From the point this - * call is made your handler function may be invoked. Since - * your handler function must clear any interrupt the board - * raises, you must take care both to initialise your hardware - * and to set up the interrupt handler in the right order. - * - * Dev_id must be globally unique. Normally the address of the - * device data structure is used as the cookie. Since the handler - * receives this value it makes sense to use it. - * - * If your interrupt is shared you must pass a non NULL dev_id - * as this is required when freeing the interrupt. - * - * Flags: - * - * IRQF_SHARED Interrupt is shared - * - * IRQF_DISABLED Disable local interrupts while processing - * - * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy - * - */ - -int request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id) -{ - int retval; - struct irqaction *action; - -#if 1 - /* - * Sanity-check: shared interrupts should REALLY pass in - * a real dev-ID, otherwise we'll have trouble later trying - * to figure out which interrupt is which (messes up the - * interrupt freeing logic etc). - */ - if (irqflags & IRQF_SHARED) { - if (!dev_id) - printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", - devname, (&irq)[-1]); - } -#endif - - if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS) - return -EINVAL; - if (!handler) - return -EINVAL; - - action = (struct irqaction *) kmalloc(sizeof(struct irqaction), GFP_KERNEL); - if (!action) - return -ENOMEM; - - action->handler = handler; - action->flags = irqflags; - action->mask = CPU_MASK_NONE; - action->name = devname; - action->next = NULL; - action->dev_id = dev_id; - - retval = setup_irq(irq, action); - if (retval) - kfree(action); - return retval; -} - -EXPORT_SYMBOL(request_irq); - -/** - * free_irq - free an interrupt - * @irq: Interrupt line to free - * @dev_id: Device identity to free - * - * Remove an interrupt handler. The handler is removed and if the - * interrupt line is no longer in use by any driver it is disabled. - * On a shared IRQ the caller must ensure the interrupt is disabled - * on the card it drives before calling this function. The function - * does not return until any executing interrupts for this IRQ - * have completed. - * - * This function may be called from interrupt context. - * - * Bugs: Attempting to free an irq in a handler for the same irq hangs - * the machine. - */ - -void free_irq(unsigned int irq, void *dev_id) -{ - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - struct irqaction **p, **pp; - unsigned long flags; - - if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS) - return; - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - if (!source) - BUG(); - - level = source->level; - p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - - spin_lock_irqsave(&level->lock, flags); - - for (pp = p; *pp; pp = &(*pp)->next) { - struct irqaction *action = *pp; - - if (action->dev_id != dev_id) - continue; - - /* found it - remove from the list of entries */ - *pp = action->next; - - level->usage--; - - if (p == pp && group->control) - group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 0); - - if (level->usage == 0) - __set_MASK(level - frv_irq_levels); - - spin_unlock_irqrestore(&level->lock,flags); - -#ifdef CONFIG_SMP - /* Wait to make sure it's not being used on another CPU */ - while (desc->status & IRQ_INPROGRESS) - barrier(); -#endif - kfree(action); - return; - } -} - -EXPORT_SYMBOL(free_irq); - -/* - * IRQ autodetection code.. - * - * This depends on the fact that any interrupt that comes in on to an - * unassigned IRQ will cause GxICR_DETECT to be set - */ - -static DECLARE_MUTEX(probe_sem); - -/** - * probe_irq_on - begin an interrupt autodetect - * - * Commence probing for an interrupt. The interrupts are scanned - * and a mask of potential interrupt lines is returned. - * - */ - -unsigned long probe_irq_on(void) -{ - down(&probe_sem); - return 0; } -EXPORT_SYMBOL(probe_irq_on); - -/* - * Return a mask of triggered interrupts (this - * can handle only legacy ISA interrupts). - */ - -/** - * probe_irq_mask - scan a bitmap of interrupt lines - * @val: mask of interrupts to consider - * - * Scan the ISA bus interrupt lines and return a bitmap of - * active interrupts. The interrupt probe logic state is then - * returned to its previous value. - * - * Note: we need to scan all the irq's even though we will - * only return ISA irq numbers - just so that we reset them - * all to a known state. - */ -unsigned int probe_irq_mask(unsigned long xmask) -{ - up(&probe_sem); - return 0; -} - -EXPORT_SYMBOL(probe_irq_mask); - /* - * Return the one interrupt that triggered (this can - * handle any interrupt source). - */ - -/** - * probe_irq_off - end an interrupt autodetect - * @xmask: mask of potential interrupts (unused) - * - * Scans the unused interrupt lines and returns the line which - * appears to have triggered the interrupt. If no interrupt was - * found then zero is returned. If more than one interrupt is - * found then minus the first candidate is returned to indicate - * their is doubt. - * - * The interrupt probe logic state is returned to its previous - * value. - * - * BUGS: When used in a module (which arguably shouldnt happen) - * nothing prevents two IRQ probe callers from overlapping. The - * results of this are non-optimal. + * initialise the interrupt system */ - -int probe_irq_off(unsigned long xmask) -{ - up(&probe_sem); - return -1; -} - -EXPORT_SYMBOL(probe_irq_off); - -/* this was setup_x86_irq but it seems pretty generic */ -int setup_irq(unsigned int irq, struct irqaction *new) -{ - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - struct irqaction **p, **pp; - unsigned long flags; - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - if (!source) - BUG(); - - level = source->level; - - p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - - /* - * Some drivers like serial.c use request_irq() heavily, - * so we have to be careful not to interfere with a - * running system. - */ - if (new->flags & IRQF_SAMPLE_RANDOM) { - /* - * This function might sleep, we want to call it first, - * outside of the atomic block. - * Yes, this might clear the entropy pool if the wrong - * driver is attempted to be loaded, without actually - * installing a new handler, but is this really a problem, - * only the sysadmin is able to do this. - */ - rand_initialize_irq(irq); - } - - /* must juggle the interrupt processing stuff with interrupts disabled */ - spin_lock_irqsave(&level->lock, flags); - - /* can't share interrupts unless all parties agree to */ - if (level->usage != 0 && !(level->flags & new->flags & IRQF_SHARED)) { - spin_unlock_irqrestore(&level->lock,flags); - return -EBUSY; - } - - /* add new interrupt at end of irq queue */ - pp = p; - while (*pp) - pp = &(*pp)->next; - - *pp = new; - - level->usage++; - level->flags = new->flags; - - /* turn the interrupts on */ - if (level->usage == 1) - __clr_MASK(level - frv_irq_levels); - - if (p == pp && group->control) - group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 1); - - spin_unlock_irqrestore(&level->lock, flags); - register_irq_proc(irq); - return 0; -} - -static struct proc_dir_entry * root_irq_dir; -static struct proc_dir_entry * irq_dir [NR_IRQS]; - -#define HEX_DIGITS 8 - -static unsigned int parse_hex_value (const char __user *buffer, - unsigned long count, unsigned long *ret) -{ - unsigned char hexnum [HEX_DIGITS]; - unsigned long value; - int i; - - if (!count) - return -EINVAL; - if (count > HEX_DIGITS) - count = HEX_DIGITS; - if (copy_from_user(hexnum, buffer, count)) - return -EFAULT; - - /* - * Parse the first 8 characters as a hex string, any non-hex char - * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same. - */ - value = 0; - - for (i = 0; i < count; i++) { - unsigned int c = hexnum[i]; - - switch (c) { - case '0' ... '9': c -= '0'; break; - case 'a' ... 'f': c -= 'a'-10; break; - case 'A' ... 'F': c -= 'A'-10; break; - default: - goto out; - } - value = (value << 4) | c; - } -out: - *ret = value; - return 0; -} - - -static int prof_cpu_mask_read_proc (char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - unsigned long *mask = (unsigned long *) data; - if (count < HEX_DIGITS+1) - return -EINVAL; - return sprintf (page, "%08lx\n", *mask); -} - -static int prof_cpu_mask_write_proc (struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - unsigned long *mask = (unsigned long *) data, full_count = count, err; - unsigned long new_value; - - show_state(); - err = parse_hex_value(buffer, count, &new_value); - if (err) - return err; - - *mask = new_value; - return full_count; -} - -#define MAX_NAMELEN 10 - -static void register_irq_proc (unsigned int irq) -{ - char name [MAX_NAMELEN]; - - if (!root_irq_dir || irq_dir[irq]) - return; - - memset(name, 0, MAX_NAMELEN); - sprintf(name, "%d", irq); - - /* create /proc/irq/1234 */ - irq_dir[irq] = proc_mkdir(name, root_irq_dir); -} - -unsigned long prof_cpu_mask = -1; - -void init_irq_proc (void) +void __init init_IRQ(void) { - struct proc_dir_entry *entry; - int i; + int level; - /* create /proc/irq */ - root_irq_dir = proc_mkdir("irq", NULL); + for (level = 1; level <= 14; level++) + set_irq_chip_and_handler(level, &frv_cpu_pic, + handle_level_irq); - /* create /proc/irq/prof_cpu_mask */ - entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir); - if (!entry) - return; + set_irq_handler(IRQ_CPU_TIMER0, handle_edge_irq); - entry->nlink = 1; - entry->data = (void *)&prof_cpu_mask; - entry->read_proc = prof_cpu_mask_read_proc; - entry->write_proc = prof_cpu_mask_write_proc; - - /* - * Create entries for all existing IRQs. + /* set the trigger levels for internal interrupt sources + * - timers all falling-edge + * - ERR0 is rising-edge + * - all others are high-level */ - for (i = 0; i < NR_IRQS; i++) - register_irq_proc(i); -} + __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 */ + __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 */ + + /* route internal interrupts */ + set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL, + IRQ_DMA0_LEVEL); + set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL); + set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL, + IRQ_UART1_LEVEL, IRQ_UART0_LEVEL); + set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL, + IRQ_DMA4_LEVEL); + + /* route external interrupts */ + set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL, + IRQ_XIRQ4_LEVEL); + set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL, + IRQ_XIRQ0_LEVEL); + +#if defined(CONFIG_MB93091_VDK) + __set_TM1(0x55550000); /* XIRQ7-0 all active low */ +#elif defined(CONFIG_MB93093_PDK) + __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */ +#else +#error dont know external IRQ trigger levels for this setup +#endif -/*****************************************************************************/ -/* - * initialise the interrupt system - */ -void __init init_IRQ(void) -{ - route_cpu_irqs(); fpga_init(); #ifdef CONFIG_FUJITSU_MB93493 - route_mb93493_irqs(); + mb93493_init(); #endif -} /* end init_IRQ() */ +} |