diff options
Diffstat (limited to 'arch/m68k/include')
| -rw-r--r-- | arch/m68k/include/asm/cacheflush_mm.h | 41 | ||||
| -rw-r--r-- | arch/m68k/include/asm/dma.h | 8 | ||||
| -rw-r--r-- | arch/m68k/include/asm/gpio.h | 179 | ||||
| -rw-r--r-- | arch/m68k/include/asm/io_mm.h | 50 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m520xsim.h | 14 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m523xsim.h | 1 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m525xsim.h | 194 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m527xsim.h | 1 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m528xsim.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m532xsim.h | 17 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5441xsim.h | 276 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m54xxacr.h | 4 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m54xxpci.h | 138 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m54xxsim.h | 3 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfclk.h | 43 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfgpio.h | 343 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfsim.h | 5 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcftimer.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfuart.h | 4 | ||||
| -rw-r--r-- | arch/m68k/include/asm/pci.h | 6 | ||||
| -rw-r--r-- | arch/m68k/include/asm/pinmux.h | 30 |
21 files changed, 1090 insertions, 271 deletions
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h index 8104bd874649..fa2c3d681d84 100644 --- a/arch/m68k/include/asm/cacheflush_mm.h +++ b/arch/m68k/include/asm/cacheflush_mm.h @@ -16,7 +16,48 @@ #define DCACHE_MAX_ADDR 0 #define DCACHE_SETMASK 0 #endif +#ifndef CACHE_MODE +#define CACHE_MODE 0 +#define CACR_ICINVA 0 +#define CACR_DCINVA 0 +#define CACR_BCINVA 0 +#endif + +/* + * ColdFire architecture has no way to clear individual cache lines, so we + * are stuck invalidating all the cache entries when we want a clear operation. + */ +static inline void clear_cf_icache(unsigned long start, unsigned long end) +{ + __asm__ __volatile__ ( + "movec %0,%%cacr\n\t" + "nop" + : + : "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA)); +} + +static inline void clear_cf_dcache(unsigned long start, unsigned long end) +{ + __asm__ __volatile__ ( + "movec %0,%%cacr\n\t" + "nop" + : + : "r" (CACHE_MODE | CACR_DCINVA)); +} +static inline void clear_cf_bcache(unsigned long start, unsigned long end) +{ + __asm__ __volatile__ ( + "movec %0,%%cacr\n\t" + "nop" + : + : "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA | CACR_DCINVA)); +} + +/* + * Use the ColdFire cpushl instruction to push (and invalidate) cache lines. + * The start and end addresses are cache line numbers not memory addresses. + */ static inline void flush_cf_icache(unsigned long start, unsigned long end) { unsigned long set; diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index 6fbdfe895104..0ff3fc6a6d9a 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -33,7 +33,9 @@ * Set number of channels of DMA on ColdFire for different implementations. */ #if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) + defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ + defined(CONFIG_M528x) || defined(CONFIG_M525x) + #define MAX_M68K_DMA_CHANNELS 4 #elif defined(CONFIG_M5272) #define MAX_M68K_DMA_CHANNELS 1 @@ -486,6 +488,10 @@ static __inline__ int get_dma_residue(unsigned int dmanr) extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ extern void free_dma(unsigned int dmanr); /* release it again */ +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else #define isa_dma_bridge_buggy (0) +#endif #endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index 00d0071de4c3..4395ffc51fdb 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -17,170 +17,9 @@ #define coldfire_gpio_h #include <linux/io.h> -#include <asm-generic/gpio.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> - -/* - * The Freescale Coldfire family is quite varied in how they implement GPIO. - * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have - * only one port, others have multiple ports; some have a single data latch - * for both input and output, others have a separate pin data register to read - * input; some require a read-modify-write access to change an output, others - * have set and clear registers for some of the outputs; Some have all the - * GPIOs in a single control area, others have some GPIOs implemented in - * different modules. - * - * This implementation attempts accommodate the differences while presenting - * a generic interface that will optimize to as few instructions as possible. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M54xx) - -/* These parts have GPIO organized by 8 bit ports */ - -#define MCFGPIO_PORTTYPE u8 -#define MCFGPIO_PORTSIZE 8 -#define mcfgpio_read(port) __raw_readb(port) -#define mcfgpio_write(data, port) __raw_writeb(data, port) - -#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272) - -/* These parts have GPIO organized by 16 bit ports */ - -#define MCFGPIO_PORTTYPE u16 -#define MCFGPIO_PORTSIZE 16 -#define mcfgpio_read(port) __raw_readw(port) -#define mcfgpio_write(data, port) __raw_writew(data, port) - -#elif defined(CONFIG_M5249) - -/* These parts have GPIO organized by 32 bit ports */ - -#define MCFGPIO_PORTTYPE u32 -#define MCFGPIO_PORTSIZE 32 -#define mcfgpio_read(port) __raw_readl(port) -#define mcfgpio_write(data, port) __raw_writel(data, port) - -#endif - -#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE)) -#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE) - -#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) -/* - * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses - * read-modify-write to change an output and a GPIO module which has separate - * set/clr registers to directly change outputs with a single write access. - */ -#if defined(CONFIG_M528x) -/* - * The 528x also has GPIOs in other modules (GPT, QADC) which use - * read-modify-write as well as those controlled by the EPORT and GPIO modules. - */ -#define MCFGPIO_SCR_START 40 -#else -#define MCFGPIO_SCR_START 8 -#endif - -#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \ - mcfgpio_port(gpio - MCFGPIO_SCR_START)) - -#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \ - mcfgpio_port(gpio - MCFGPIO_SCR_START)) -#else - -#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX -/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */ -#define MCFGPIO_SETR_PORT(gpio) 0 -#define MCFGPIO_CLRR_PORT(gpio) 0 - -#endif -/* - * Coldfire specific helper functions - */ - -/* return the port pin data register for a gpio */ -static inline u32 __mcf_gpio_ppdr(unsigned gpio) -{ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5307) || defined(CONFIG_M5407) - return MCFSIM_PADAT; -#elif defined(CONFIG_M5272) - if (gpio < 16) - return MCFSIM_PADAT; - else if (gpio < 32) - return MCFSIM_PBDAT; - else - return MCFSIM_PCDAT; -#elif defined(CONFIG_M5249) - if (gpio < 32) - return MCFSIM2_GPIOREAD; - else - return MCFSIM2_GPIO1READ; -#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) - if (gpio < 8) - return MCFEPORT_EPPDR; -#if defined(CONFIG_M528x) - else if (gpio < 16) - return MCFGPTA_GPTPORT; - else if (gpio < 24) - return MCFGPTB_GPTPORT; - else if (gpio < 32) - return MCFQADC_PORTQA; - else if (gpio < 40) - return MCFQADC_PORTQB; -#endif - else - return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); -#else - return 0; -#endif -} - -/* return the port output data register for a gpio */ -static inline u32 __mcf_gpio_podr(unsigned gpio) -{ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5307) || defined(CONFIG_M5407) - return MCFSIM_PADAT; -#elif defined(CONFIG_M5272) - if (gpio < 16) - return MCFSIM_PADAT; - else if (gpio < 32) - return MCFSIM_PBDAT; - else - return MCFSIM_PCDAT; -#elif defined(CONFIG_M5249) - if (gpio < 32) - return MCFSIM2_GPIOWRITE; - else - return MCFSIM2_GPIO1WRITE; -#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) - if (gpio < 8) - return MCFEPORT_EPDR; -#if defined(CONFIG_M528x) - else if (gpio < 16) - return MCFGPTA_GPTPORT; - else if (gpio < 24) - return MCFGPTB_GPTPORT; - else if (gpio < 32) - return MCFQADC_PORTQA; - else if (gpio < 40) - return MCFQADC_PORTQB; -#endif - else - return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); -#else - return 0; -#endif -} - +#include <asm/mcfgpio.h> /* * The Generic GPIO functions * @@ -191,7 +30,7 @@ static inline u32 __mcf_gpio_podr(unsigned gpio) static inline int gpio_get_value(unsigned gpio) { if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) - return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio); + return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio); else return __gpio_get_value(gpio); } @@ -204,12 +43,12 @@ static inline void gpio_set_value(unsigned gpio, int value) MCFGPIO_PORTTYPE data; local_irq_save(flags); - data = mcfgpio_read(__mcf_gpio_podr(gpio)); + data = mcfgpio_read(__mcfgpio_podr(gpio)); if (value) data |= mcfgpio_bit(gpio); else data &= ~mcfgpio_bit(gpio); - mcfgpio_write(data, __mcf_gpio_podr(gpio)); + mcfgpio_write(data, __mcfgpio_podr(gpio)); local_irq_restore(flags); } else { if (value) @@ -225,8 +64,14 @@ static inline void gpio_set_value(unsigned gpio, int value) static inline int gpio_to_irq(unsigned gpio) { - return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE - : __gpio_to_irq(gpio); +#if defined(MCFGPIO_IRQ_MIN) + if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX)) +#else + if (gpio < MCFGPIO_IRQ_MAX) +#endif + return gpio + MCFGPIO_IRQ_VECBASE; + else + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned irq) diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h index fa4324bcf566..a6686d26fe17 100644 --- a/arch/m68k/include/asm/io_mm.h +++ b/arch/m68k/include/asm/io_mm.h @@ -65,7 +65,53 @@ -#ifdef CONFIG_ISA +#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE) + +#define HAVE_ARCH_PIO_SIZE +#define PIO_OFFSET 0 +#define PIO_MASK 0xffff +#define PIO_RESERVED 0x10000 + +u8 mcf_pci_inb(u32 addr); +u16 mcf_pci_inw(u32 addr); +u32 mcf_pci_inl(u32 addr); +void mcf_pci_insb(u32 addr, u8 *buf, u32 len); +void mcf_pci_insw(u32 addr, u16 *buf, u32 len); +void mcf_pci_insl(u32 addr, u32 *buf, u32 len); + +void mcf_pci_outb(u8 v, u32 addr); +void mcf_pci_outw(u16 v, u32 addr); +void mcf_pci_outl(u32 v, u32 addr); +void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len); +void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len); +void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len); + +#define inb mcf_pci_inb +#define inb_p mcf_pci_inb +#define inw mcf_pci_inw +#define inw_p mcf_pci_inw +#define inl mcf_pci_inl +#define inl_p mcf_pci_inl +#define insb mcf_pci_insb +#define insw mcf_pci_insw +#define insl mcf_pci_insl + +#define outb mcf_pci_outb +#define outb_p mcf_pci_outb +#define outw mcf_pci_outw +#define outw_p mcf_pci_outw +#define outl mcf_pci_outl +#define outl_p mcf_pci_outl +#define outsb mcf_pci_outsb +#define outsw mcf_pci_outsw +#define outsl mcf_pci_outsl + +#define readb(addr) in_8(addr) +#define writeb(v, addr) out_8((addr), (v)) +#define readw(addr) in_le16(addr) +#define writew(v, addr) out_le16((addr), (v)) + +#elif defined(CONFIG_ISA) #if MULTI_ISA == 0 #undef MULTI_ISA @@ -340,4 +386,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int */ #define xlate_dev_kmem_ptr(p) p +#define ioport_map(port, nr) ((void __iomem *)(port)) + #endif /* _IO_H */ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 17f2aab9cf97..db3f8ee4a6c6 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -42,6 +42,9 @@ #define MCFINTC1_SIMR (0) #define MCFINTC1_CIMR (0) #define MCFINTC1_ICR0 (0) +#define MCFINTC2_SIMR (0) +#define MCFINTC2_CIMR (0) +#define MCFINTC2_ICR0 (0) #define MCFINT_VECBASE 64 #define MCFINT_UART0 26 /* Interrupt number for UART0 */ @@ -62,6 +65,7 @@ #define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) #define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) +#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1) /* * SDRAM configuration registers. @@ -186,5 +190,15 @@ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ +/* + * Power Management. + */ +#define MCFPM_WCR 0xfc040013 +#define MCFPM_PPMSR0 0xfc04002c +#define MCFPM_PPMCR0 0xfc04002d +#define MCFPM_PPMHR0 0xfc040030 +#define MCFPM_PPMLR0 0xfc040034 +#define MCFPM_LPCR 0xfc0a0007 + /****************************************************************************/ #endif /* m520xsim_h */ diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 075062d4eecd..91d3abc3f2a5 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -52,6 +52,7 @@ #define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) #define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) +#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1) /* * SDRAM configuration registers. diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h new file mode 100644 index 000000000000..6da24f653902 --- /dev/null +++ b/arch/m68k/include/asm/m525xsim.h @@ -0,0 +1,194 @@ +/****************************************************************************/ + +/* + * m525xsim.h -- ColdFire 525x System Integration Module support. + * + * (C) Copyright 2012, Steven king <sfking@fdwdc.com> + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m525xsim_h +#define m525xsim_h +/****************************************************************************/ + +#define CPU_NAME "COLDFIRE(m525x)" +#define CPU_INSTR_PER_JIFFY 3 +#define MCF_BUSCLK (MCF_CLK / 2) + +#include <asm/m52xxacr.h> + +/* + * The 525x has a second MBAR region, define its address. + */ +#define MCF_MBAR2 0x80000000 + +/* + * Define the 525x SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ + +#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ +#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ +#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */ + +/* + * Secondary Interrupt Controller (in MBAR2) +*/ +#define MCFINTC2_INTBASE (MCF_MBAR2 + 0x168) /* Base Vector Reg */ +#define MCFINTC2_INTPRI1 (MCF_MBAR2 + 0x140) /* 0-7 priority */ +#define MCFINTC2_INTPRI2 (MCF_MBAR2 + 0x144) /* 8-15 priority */ +#define MCFINTC2_INTPRI3 (MCF_MBAR2 + 0x148) /* 16-23 priority */ +#define MCFINTC2_INTPRI4 (MCF_MBAR2 + 0x14c) /* 24-31 priority */ +#define MCFINTC2_INTPRI5 (MCF_MBAR2 + 0x150) /* 32-39 priority */ +#define MCFINTC2_INTPRI6 (MCF_MBAR2 + 0x154) /* 40-47 priority */ +#define MCFINTC2_INTPRI7 (MCF_MBAR2 + 0x158) /* 48-55 priority */ +#define MCFINTC2_INTPRI8 (MCF_MBAR2 + 0x15c) /* 56-63 priority */ + +#define MCFINTC2_INTPRI_REG(i) (MCFINTC2_INTPRI1 + \ + ((((i) - MCFINTC2_VECBASE) / 8) * 4)) +#define MCFINTC2_INTPRI_BITS(b, i) ((b) << (((i) % 8) * 4)) + +/* + * Timer module. + */ +#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ +#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ + +/* + * UART module. + */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */ +#define MCFQSPI_SIZE 0x40 /* Register set size */ + + +#define MCFQSPI_CS0 15 +#define MCFQSPI_CS1 16 +#define MCFQSPI_CS2 24 +#define MCFQSPI_CS3 28 + +/* + * I2C module. + */ +#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */ +#define MCFI2C_SIZE0 0x20 /* Register set size */ + +#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */ +#define MCFI2C_SIZE1 0x20 /* Register set size */ +/* + * DMA unit base addresses. + */ +#define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */ +#define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */ +#define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */ +#define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */ + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ +#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ + +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */ +#define MCF_IRQ_I2C0 29 +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ + +/* + * Define the base interrupt for the second interrupt controller. + * We set it to 128, out of the way of the base interrupts, and plenty + * of room for its 64 interrupts. + */ +#define MCFINTC2_VECBASE 128 + +#define MCF_IRQ_GPIO0 (MCFINTC2_VECBASE + 32) +#define MCF_IRQ_GPIO1 (MCFINTC2_VECBASE + 33) +#define MCF_IRQ_GPIO2 (MCFINTC2_VECBASE + 34) +#define MCF_IRQ_GPIO3 (MCFINTC2_VECBASE + 35) +#define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36) +#define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37) +#define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38) + +#define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40) +#define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62) + +/* + * General purpose IO registers (in MBAR2). + */ +#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */ +#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */ +#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */ +#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */ +#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */ +#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */ +#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */ +#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */ + +#define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */ +#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */ +#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */ + +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 64 +#define MCFGPIO_IRQ_MAX 7 +#define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0 + +/****************************************************************************/ +#endif /* m525xsim_h */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 83db8106f50a..71aa5104d3d6 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -60,6 +60,7 @@ #define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1) #define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) +#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1) /* * SDRAM configuration registers. diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index 497c31c803ff..4acb3c0a642e 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -52,7 +52,7 @@ #define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) #define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) - +#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1) /* * SDRAM configuration registers. */ diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index 29b66e21413a..5ca7b298c6eb 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -82,6 +82,9 @@ #define MCFINTC1_SIMR 0xFC04C01C #define MCFINTC1_CIMR 0xFC04C01D #define MCFINTC1_ICR0 0xFC04C040 +#define MCFINTC2_SIMR (0) +#define MCFINTC2_CIMR (0) +#define MCFINTC2_ICR0 (0) #define MCFSIM_ICR_TIMER1 (0xFC048040+32) #define MCFSIM_ICR_TIMER2 (0xFC048040+33) @@ -135,6 +138,20 @@ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ + +/* + * Power Management + */ +#define MCFPM_WCR 0xfc040013 +#define MCFPM_PPMSR0 0xfc04002c +#define MCFPM_PPMCR0 0xfc04002d +#define MCFPM_PPMSR1 0xfc04002e +#define MCFPM_PPMCR1 0xfc04002f +#define MCFPM_PPMHR0 0xfc040030 +#define MCFPM_PPMLR0 0xfc040034 +#define MCFPM_PPMHR1 0xfc040038 +#define MCFPM_LPCR 0xec090007 + /********************************************************************* * * Inter-IC (I2C) Module diff --git a/arch/m68k/include/asm/m5441xsim.h b/arch/m68k/include/asm/m5441xsim.h new file mode 100644 index 000000000000..cc798ab9524b --- /dev/null +++ b/arch/m68k/include/asm/m5441xsim.h @@ -0,0 +1,276 @@ +/* + * m5441xsim.h -- Coldfire 5441x register definitions + * + * (C) Copyright 2012, Steven King <sfking@fdwdc.com> +*/ + +#ifndef m5441xsim_h +#define m5441xsim_h + +#define CPU_NAME "COLDFIRE(m5441x)" +#define CPU_INSTR_PER_JIFFY 2 +#define MCF_BUSCLK (MCF_CLK / 2) + +#include <asm/m54xxacr.h> + +/* + * Reset Controller Module. + */ + +#define MCF_RCR 0xec090000 +#define MCF_RSR 0xec090001 + +#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ +#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ + +/* + * Interrupt Controller Modules. + */ +/* the 5441x have 3 interrupt controllers, each control 64 interrupts */ +#define MCFINT_VECBASE 64 +#define MCFINT0_VECBASE MCFINT_VECBASE +#define MCFINT1_VECBASE (MCFINT0_VECBASE + 64) +#define MCFINT2_VECBASE (MCFINT1_VECBASE + 64) + +/* interrupt controller 0 */ +#define MCFINTC0_SIMR 0xfc04801c +#define MCFINTC0_CIMR 0xfc04801d +#define MCFINTC0_ICR0 0xfc048040 +/* interrupt controller 1 */ +#define MCFINTC1_SIMR 0xfc04c01c +#define MCFINTC1_CIMR 0xfc04c01d +#define MCFINTC1_ICR0 0xfc04c040 +/* interrupt controller 2 */ +#define MCFINTC2_SIMR 0xfc05001c +#define MCFINTC2_CIMR 0xfc05001d +#define MCFINTC2_ICR0 0xfc050040 + +/* on interrupt controller 0 */ +#define MCFINT0_EPORT0 1 +#define MCFINT0_UART0 26 +#define MCFINT0_UART1 27 +#define MCFINT0_UART2 28 +#define MCFINT0_UART3 29 +#define MCFINT0_I2C0 30 +#define MCFINT0_DSPI0 31 + +#define MCFINT0_TIMER0 32 +#define MCFINT0_TIMER1 33 +#define MCFINT0_TIMER2 34 +#define MCFINT0_TIMER3 35 + +#define MCFINT0_FECRX0 36 +#define MCFINT0_FECTX0 40 +#define MCFINT0_FECENTC0 42 + +#define MCFINT0_FECRX1 49 +#define MCFINT0_FECTX1 53 +#define MCFINT0_FECENTC1 55 + +/* on interrupt controller 1 */ +#define MCFINT1_UART4 48 +#define MCFINT1_UART5 49 +#define MCFINT1_UART6 50 +#define MCFINT1_UART7 51 +#define MCFINT1_UART8 52 +#define MCFINT1_UART9 53 +#define MCFINT1_DSPI1 54 +#define MCFINT1_DSPI2 55 +#define MCFINT1_DSPI3 56 +#define MCFINT1_I2C1 57 +#define MCFINT1_I2C2 58 +#define MCFINT1_I2C3 59 +#define MCFINT1_I2C4 60 +#define MCFINT1_I2C5 61 + +/* on interrupt controller 2 */ +#define MCFINT2_PIT0 13 +#define MCFINT2_PIT1 14 +#define MCFINT2_PIT2 15 +#define MCFINT2_PIT3 16 +#define MCFINT2_RTC 26 + +/* + * PIT timer module. + */ +#define MCFPIT_BASE0 0xFC080000 /* Base address of TIMER0 */ +#define MCFPIT_BASE1 0xFC084000 /* Base address of TIMER1 */ +#define MCFPIT_BASE2 0xFC088000 /* Base address of TIMER2 */ +#define MCFPIT_BASE3 0xFC08C000 /* Base address of TIMER3 */ + + +#define MCF_IRQ_PIT1 (MCFINT2_VECBASE + MCFINT2_PIT1) + +/* + * Power Management + */ +#define MCFPM_WCR 0xfc040013 +#define MCFPM_PPMSR0 0xfc04002c +#define MCFPM_PPMCR0 0xfc04002d +#define MCFPM_PPMSR1 0xfc04002e +#define MCFPM_PPMCR1 0xfc04002f +#define MCFPM_PPMHR0 0xfc040030 +#define MCFPM_PPMLR0 0xfc040034 +#define MCFPM_PPMHR1 0xfc040038 +#define MCFPM_PPMLR1 0xfc04003c +#define MCFPM_LPCR 0xec090007 +/* + * UART module. + */ +#define MCFUART_BASE0 0xfc060000 /* Base address of UART0 */ +#define MCFUART_BASE1 0xfc064000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xfc068000 /* Base address of UART2 */ +#define MCFUART_BASE3 0xfc06c000 /* Base address of UART3 */ +#define MCFUART_BASE4 0xec060000 /* Base address of UART4 */ +#define MCFUART_BASE5 0xec064000 /* Base address of UART5 */ +#define MCFUART_BASE6 0xec068000 /* Base address of UART6 */ +#define MCFUART_BASE7 0xec06c000 /* Base address of UART7 */ +#define MCFUART_BASE8 0xec070000 /* Base address of UART8 */ +#define MCFUART_BASE9 0xec074000 /* Base address of UART9 */ + +#define MCF_IRQ_UART0 (MCFINT0_VECBASE + MCFINT0_UART0) +#define MCF_IRQ_UART1 (MCFINT0_VECBASE + MCFINT0_UART1) +#define MCF_IRQ_UART2 (MCFINT0_VECBASE + MCFINT0_UART2) +#define MCF_IRQ_UART3 (MCFINT0_VECBASE + MCFINT0_UART3) +#define MCF_IRQ_UART4 (MCFINT1_VECBASE + MCFINT1_UART4) +#define MCF_IRQ_UART5 (MCFINT1_VECBASE + MCFINT1_UART5) +#define MCF_IRQ_UART6 (MCFINT1_VECBASE + MCFINT1_UART6) +#define MCF_IRQ_UART7 (MCFINT1_VECBASE + MCFINT1_UART7) +#define MCF_IRQ_UART8 (MCFINT1_VECBASE + MCFINT1_UART8) +#define MCF_IRQ_UART9 (MCFINT1_VECBASE + MCFINT1_UART9) +/* + * FEC modules. + */ +#define MCFFEC_BASE0 0xfc0d4000 +#define MCFFEC_SIZE0 0x800 +#define MCF_IRQ_FECRX0 (MCFINT0_VECBASE + MCFINT0_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT0_VECBASE + MCFINT0_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT0_VECBASE + MCFINT0_FECENTC0) + +#define MCFFEC_BASE1 0xfc0d8000 +#define MCFFEC_SIZE1 0x800 +#define MCF_IRQ_FECRX1 (MCFINT0_VECBASE + MCFINT0_FECRX1) +#define MCF_IRQ_FECTX1 (MCFINT0_VECBASE + MCFINT0_FECTX1) +#define MCF_IRQ_FECENTC1 (MCFINT0_VECBASE + MCFINT0_FECENTC1) +/* + * I2C modules. + */ +#define MCFI2C_BASE0 0xfc058000 +#define MCFI2C_SIZE0 0x20 +#define MCFI2C_BASE1 0xfc038000 +#define MCFI2C_SIZE1 0x20 +#define MCFI2C_BASE2 0xec010000 +#define MCFI2C_SIZE2 0x20 +#define MCFI2C_BASE3 0xec014000 +#define MCFI2C_SIZE3 0x20 +#define MCFI2C_BASE4 0xec018000 +#define MCFI2C_SIZE4 0x20 +#define MCFI2C_BASE5 0xec01c000 +#define MCFI2C_SIZE5 0x20 + +#define MCF_IRQ_I2C0 (MCFINT0_VECBASE + MCFINT0_I2C0) +#define MCF_IRQ_I2C1 (MCFINT1_VECBASE + MCFINT1_I2C1) +#define MCF_IRQ_I2C2 (MCFINT1_VECBASE + MCFINT1_I2C2) +#define MCF_IRQ_I2C3 (MCFINT1_VECBASE + MCFINT1_I2C3) +#define MCF_IRQ_I2C4 (MCFINT1_VECBASE + MCFINT1_I2C4) +#define MCF_IRQ_I2C5 (MCFINT1_VECBASE + MCFINT1_I2C5) +/* + * EPORT Module. + */ +#define MCFEPORT_EPPAR 0xfc090000 +#define MCFEPORT_EPIER 0xfc090003 +#define MCFEPORT_EPFR 0xfc090006 +/* + * RTC Module. + */ +#define MCFRTC_BASE 0xfc0a8000 +#define MCFRTC_SIZE (0xfc0a8840 - 0xfc0a8000) +#define MCF_IRQ_RTC (MCFINT2_VECBASE + MCFINT2_RTC) + +/* + * GPIO Module. + */ +#define MCFGPIO_PODR_A 0xec094000 +#define MCFGPIO_PODR_B 0xec094001 +#define MCFGPIO_PODR_C 0xec094002 +#define MCFGPIO_PODR_D 0xec094003 +#define MCFGPIO_PODR_E 0xec094004 +#define MCFGPIO_PODR_F 0xec094005 +#define MCFGPIO_PODR_G 0xec094006 +#define MCFGPIO_PODR_H 0xec094007 +#define MCFGPIO_PODR_I 0xec094008 +#define MCFGPIO_PODR_J 0xec094009 +#define MCFGPIO_PODR_K 0xec09400a + +#define MCFGPIO_PDDR_A 0xec09400c +#define MCFGPIO_PDDR_B 0xec09400d +#define MCFGPIO_PDDR_C 0xec09400e +#define MCFGPIO_PDDR_D 0xec09400f +#define MCFGPIO_PDDR_E 0xec094010 +#define MCFGPIO_PDDR_F 0xec094011 +#define MCFGPIO_PDDR_G 0xec094012 +#define MCFGPIO_PDDR_H 0xec094013 +#define MCFGPIO_PDDR_I 0xec094014 +#define MCFGPIO_PDDR_J 0xec094015 +#define MCFGPIO_PDDR_K 0xec094016 + +#define MCFGPIO_PPDSDR_A 0xec094018 +#define MCFGPIO_PPDSDR_B 0xec094019 +#define MCFGPIO_PPDSDR_C 0xec09401a +#define MCFGPIO_PPDSDR_D 0xec09401b +#define MCFGPIO_PPDSDR_E 0xec09401c +#define MCFGPIO_PPDSDR_F 0xec09401d +#define MCFGPIO_PPDSDR_G 0xec09401e +#define MCFGPIO_PPDSDR_H 0xec09401f +#define MCFGPIO_PPDSDR_I 0xec094020 +#define MCFGPIO_PPDSDR_J 0xec094021 +#define MCFGPIO_PPDSDR_K 0xec094022 + +#define MCFGPIO_PCLRR_A 0xec094024 +#define MCFGPIO_PCLRR_B 0xec094025 +#define MCFGPIO_PCLRR_C 0xec094026 +#define MCFGPIO_PCLRR_D 0xec094027 +#define MCFGPIO_PCLRR_E 0xec094028 +#define MCFGPIO_PCLRR_F 0xec094029 +#define MCFGPIO_PCLRR_G 0xec09402a +#define MCFGPIO_PCLRR_H 0xec09402b +#define MCFGPIO_PCLRR_I 0xec09402c +#define MCFGPIO_PCLRR_J 0xec09402d +#define MCFGPIO_PCLRR_K 0xec09402e + +#define MCFGPIO_PAR_FBCTL 0xec094048 +#define MCFGPIO_PAR_BE 0xec094049 +#define MCFGPIO_PAR_CS 0xec09404a +#define MCFGPIO_PAR_CANI2C 0xec09404b +#define MCFGPIO_PAR_IRQ0H 0xec09404c +#define MCFGPIO_PAR_IRQ0L 0xec09404d +#define MCFGPIO_PAR_DSPIOWH 0xec09404e +#define MCFGPIO_PAR_DSPIOWL 0xec09404f +#define MCFGPIO_PAR_TIMER 0xec094050 +#define MCFGPIO_PAR_UART2 0xec094051 +#define MCFGPIO_PAR_UART1 0xec094052 +#define MCFGPIO_PAR_UART0 0xec094053 +#define MCFGPIO_PAR_SDHCH 0xec094054 +#define MCFGPIO_PAR_SDHCL 0xec094055 +#define MCFGPIO_PAR_SIMP0H 0xec094056 +#define MCFGPIO_PAR_SIMP0L 0xec094057 +#define MCFGPIO_PAR_SSI0H 0xec094058 +#define MCFGPIO_PAR_SSI0L 0xec094059 +#define MCFGPIO_PAR_DEBUGH1 0xec09405a +#define MCFGPIO_PAR_DEBUGH0 0xec09405b +#define MCFGPIO_PAR_DEBUGl 0xec09405c +#define MCFGPIO_PAR_FEC 0xec09405e + +/* generalization for generic gpio support */ +#define MCFGPIO_PODR MCFGPIO_PODR_A +#define MCFGPIO_PDDR MCFGPIO_PDDR_A +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_A +#define MCFGPIO_SETR MCFGPIO_PPDSDR_A +#define MCFGPIO_CLRR MCFGPIO_PCLRR_A + +#define MCFGPIO_IRQ_MIN 17 +#define MCFGPIO_IRQ_MAX 24 +#define MCFGPIO_IRQ_VECBASE (MCFINT_VECBASE - MCFGPIO_IRQ_MIN) +#define MCFGPIO_PIN_MAX 87 + +#endif /* m5441xsim_h */ diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h index 47906aafbf67..192bbfeabf70 100644 --- a/arch/m68k/include/asm/m54xxacr.h +++ b/arch/m68k/include/asm/m54xxacr.h @@ -55,6 +55,10 @@ #define ICACHE_SIZE 0x8000 /* instruction - 32k */ #define DCACHE_SIZE 0x8000 /* data - 32k */ +#elif defined(CONFIG_M5441x) + +#define ICACHE_SIZE 0x2000 /* instruction - 8k */ +#define DCACHE_SIZE 0x2000 /* data - 8k */ #endif #define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ diff --git a/arch/m68k/include/asm/m54xxpci.h b/arch/m68k/include/asm/m54xxpci.h new file mode 100644 index 000000000000..6fbf54f72f2e --- /dev/null +++ b/arch/m68k/include/asm/m54xxpci.h @@ -0,0 +1,138 @@ +/****************************************************************************/ + +/* + * m54xxpci.h -- ColdFire 547x and 548x PCI bus support + * + * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/****************************************************************************/ +#ifndef M54XXPCI_H +#define M54XXPCI_H +/****************************************************************************/ + +/* + * The core set of PCI support registers are mapped into the MBAR region. + */ +#define PCIIDR (CONFIG_MBAR + 0xb00) /* PCI device/vendor ID */ +#define PCISCR (CONFIG_MBAR + 0xb04) /* PCI status/command */ +#define PCICCRIR (CONFIG_MBAR + 0xb08) /* PCI class/revision */ +#define PCICR1 (CONFIG_MBAR + 0xb0c) /* PCI configuration 1 */ +#define PCIBAR0 (CONFIG_MBAR + 0xb10) /* PCI base address 0 */ +#define PCIBAR1 (CONFIG_MBAR + 0xb14) /* PCI base address 1 */ +#define PCICCPR (CONFIG_MBAR + 0xb28) /* PCI cardbus CIS pointer */ +#define PCISID (CONFIG_MBAR + 0xb2c) /* PCI subsystem IDs */ +#define PCIERBAR (CONFIG_MBAR + 0xb30) /* PCI expansion ROM */ +#define PCICPR (CONFIG_MBAR + 0xb34) /* PCI capabilities pointer */ +#define PCICR2 (CONFIG_MBAR + 0xb3c) /* PCI configuration 2 */ + +#define PCIGSCR (CONFIG_MBAR + 0xb60) /* Global status/control */ +#define PCITBATR0 (CONFIG_MBAR + 0xb64) /* Target base translation 0 */ +#define PCITBATR1 (CONFIG_MBAR + 0xb68) /* Target base translation 1 */ +#define PCITCR (CONFIG_MBAR + 0xb6c) /* Target control */ +#define PCIIW0BTAR (CONFIG_MBAR + 0xb70) /* Initiator window 0 */ +#define PCIIW1BTAR (CONFIG_MBAR + 0xb74) /* Initiator window 1 */ +#define PCIIW2BTAR (CONFIG_MBAR + 0xb78) /* Initiator window 2 */ +#define PCIIWCR (CONFIG_MBAR + 0xb80) /* Initiator window config */ +#define PCIICR (CONFIG_MBAR + 0xb84) /* Initiator control */ +#define PCIISR (CONFIG_MBAR + 0xb88) /* Initiator status */ +#define PCICAR (CONFIG_MBAR + 0xbf8) /* Configuration address */ + +#define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */ +#define PCITSAR (CONFIG_MBAR + 0x8404) /* TX start address */ +#define PCITTCR (CONFIG_MBAR + 0x8408) /* TX transaction control */ +#define PCITER (CONFIG_MBAR + 0x840c) /* TX enables */ +#define PCITNAR (CONFIG_MBAR + 0x8410) /* TX next address */ +#define PCITLWR (CONFIG_MBAR + 0x8414) /* TX last word */ +#define PCITDCR (CONFIG_MBAR + 0x8418) /* TX done counts */ +#define PCITSR (CONFIG_MBAR + 0x841c) /* TX status */ +#define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */ +#define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */ +#define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */ +#define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */ +#define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */ +#define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */ + +#define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */ +#define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */ +#define PCIRTCR (CONFIG_MBAR + 0x8488) /* RX transaction control */ +#define PCIRER (CONFIG_MBAR + 0x848c) /* RX enables */ +#define PCIRNAR (CONFIG_MBAR + 0x8490) /* RX next address */ +#define PCIRDCR (CONFIG_MBAR + 0x8498) /* RX done counts */ +#define PCIRSR (CONFIG_MBAR + 0x849c) /* RX status */ +#define PCIRFDR (CONFIG_MBAR + 0x84c0) /* RX FIFO data */ +#define PCIRFSR (CONFIG_MBAR + 0x84c4) /* RX FIFO status */ +#define PCIRFCR (CONFIG_MBAR + 0x84c8) /* RX FIFO control */ +#define PCIRFAR (CONFIG_MBAR + 0x84cc) /* RX FIFO alarm */ +#define PCIRFRPR (CONFIG_MBAR + 0x84d0) /* RX FIFO read pointer */ +#define PCIRFWPR (CONFIG_MBAR + 0x84d4) /* RX FIFO write pointer */ + +#define PACR (CONFIG_MBAR + 0xc00) /* PCI arbiter control */ +#define PASR (COFNIG_MBAR + 0xc04) /* PCI arbiter status */ + +/* + * Definitions for the Global status and control register. + */ +#define PCIGSCR_PE 0x20000000 /* Parity error detected */ +#define PCIGSCR_SE 0x10000000 /* System error detected */ +#define PCIGSCR_XCLKBIN 0x07000000 /* XLB2CLKIN mask */ +#define PCIGSCR_PEE 0x00002000 /* Parity error intr enable */ +#define PCIGSCR_SEE 0x00001000 /* System error intr enable */ +#define PCIGSCR_RESET 0x00000001 /* Reset bit */ + +/* + * Bit definitions for the PCICAR configuration address register. + */ +#define PCICAR_E 0x80000000 /* Enable config space */ +#define PCICAR_BUSN 16 /* Move bus bits */ +#define PCICAR_DEVFNN 8 /* Move devfn bits */ +#define PCICAR_DWORDN 0 /* Move dword bits */ + +/* + * The initiator windows hold the memory and IO mapping information. + * This macro creates the register values from the desired addresses. + */ +#define WXBTAR(hostaddr, pciaddr, size) \ + (((hostaddr) & 0xff000000) | \ + ((((size) - 1) & 0xff000000) >> 8) | \ + (((pciaddr) & 0xff000000) >> 16)) + +#define PCIIWCR_W0_MEM 0x00000000 /* Window 0 is memory */ +#define PCIIWCR_W0_IO 0x08000000 /* Window 0 is IO */ +#define PCIIWCR_W0_MRD 0x00000000 /* Window 0 memory read */ +#define PCIIWCR_W0_MRDL 0x02000000 /* Window 0 memory read line */ +#define PCIIWCR_W0_MRDM 0x04000000 /* Window 0 memory read mult */ +#define PCIIWCR_W0_E 0x01000000 /* Window 0 enable */ + +#define PCIIWCR_W1_MEM 0x00000000 /* Window 0 is memory */ +#define PCIIWCR_W1_IO 0x00080000 /* Window 0 is IO */ +#define PCIIWCR_W1_MRD 0x00000000 /* Window 0 memory read */ +#define PCIIWCR_W1_MRDL 0x00020000 /* Window 0 memory read line */ +#define PCIIWCR_W1_MRDM 0x00040000 /* Window 0 memory read mult */ +#define PCIIWCR_W1_E 0x00010000 /* Window 0 enable */ + +/* + * Bit definitions for the PCIBATR registers. + */ +#define PCITBATR0_E 0x00000001 /* Enable window 0 */ +#define PCITBATR1_E 0x00000001 /* Enable window 1 */ + +/* + * PCI arbiter support definitions and macros. + */ +#define PACR_INTMPRI 0x00000001 +#define PACR_EXTMPRI(x) (((x) & 0x1f) << 1) +#define PACR_INTMINTE 0x00010000 +#define PACR_EXTMINTE(x) (((x) & 0x1f) << 17) +#define PACR_PKMD 0x40000000 +#define PACR_DS 0x80000000 + +#define PCICR1_CL(x) ((x) & 0xf) /* Cacheline size field */ +#define PCICR1_LT(x) (((x) & 0xff) << 8) /* Latency timer field */ + +/****************************************************************************/ +#endif /* M54XXPCI_H */ diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index ae56b8848a9d..d3c5e0dbdadf 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -81,4 +81,7 @@ #define MCF_PAR_PSC_RTS_RTS (0x30) #define MCF_PAR_PSC_CANRX (0x40) +#define MCF_PAR_PCIBG (CONFIG_MBAR + 0xa48) /* PCI bus grant */ +#define MCF_PAR_PCIBR (CONFIG_MBAR + 0xa4a) /* PCI */ + #endif /* m54xxsim_h */ diff --git a/arch/m68k/include/asm/mcfclk.h b/arch/m68k/include/asm/mcfclk.h new file mode 100644 index 000000000000..b676a02bb392 --- /dev/null +++ b/arch/m68k/include/asm/mcfclk.h @@ -0,0 +1,43 @@ +/* + * mcfclk.h -- coldfire specific clock structure + */ + + +#ifndef mcfclk_h +#define mcfclk_h + +struct clk; + +#ifdef MCFPM_PPMCR0 +struct clk_ops { + void (*enable)(struct clk *); + void (*disable)(struct clk *); +}; + +struct clk { + const char *name; + struct clk_ops *clk_ops; + unsigned long rate; + unsigned long enabled; + u8 slot; +}; + +extern struct clk *mcf_clks[]; +extern struct clk_ops clk_ops0; +#ifdef MCFPM_PPMCR1 +extern struct clk_ops clk_ops1; +#endif /* MCFPM_PPMCR1 */ + +#define DEFINE_CLK(clk_bank, clk_name, clk_slot, clk_rate) \ +static struct clk __clk_##clk_bank##_##clk_slot = { \ + .name = clk_name, \ + .clk_ops = &clk_ops##clk_bank, \ + .rate = clk_rate, \ + .slot = clk_slot, \ +} + +void __clk_init_enabled(struct clk *); +void __clk_init_disabled(struct clk *); +#endif /* MCFPM_PPMCR0 */ + +#endif /* mcfclk_h */ diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h index fe468eaa51e0..fa1059f50dfc 100644 --- a/arch/m68k/include/asm/mcfgpio.h +++ b/arch/m68k/include/asm/mcfgpio.h @@ -16,82 +16,289 @@ #ifndef mcfgpio_h #define mcfgpio_h -#include <linux/io.h> +#ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> +#else + +int __mcfgpio_get_value(unsigned gpio); +void __mcfgpio_set_value(unsigned gpio, int value); +int __mcfgpio_direction_input(unsigned gpio); +int __mcfgpio_direction_output(unsigned gpio, int value); +int __mcfgpio_request(unsigned gpio); +void __mcfgpio_free(unsigned gpio); + +/* our alternate 'gpiolib' functions */ +static inline int __gpio_get_value(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_get_value(gpio); + else + return -EINVAL; +} + +static inline void __gpio_set_value(unsigned gpio, int value) +{ + if (gpio < MCFGPIO_PIN_MAX) + __mcfgpio_set_value(gpio, value); +} + +static inline int __gpio_cansleep(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + return 0; + else + return -EINVAL; +} + +static inline int __gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int gpio_direction_input(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_direction_input(gpio); + else + return -EINVAL; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_direction_output(gpio, value); + else + return -EINVAL; +} + +static inline int gpio_request(unsigned gpio, const char *label) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_request(gpio); + else + return -EINVAL; +} + +static inline void gpio_free(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + __mcfgpio_free(gpio); +} + +#endif /* CONFIG_GPIOLIB */ -struct mcf_gpio_chip { - struct gpio_chip gpio_chip; - void __iomem *pddr; - void __iomem *podr; - void __iomem *ppdr; - void __iomem *setr; - void __iomem *clrr; - const u8 *gpio_to_pinmux; -}; - -extern struct mcf_gpio_chip mcf_gpio_chips[]; -extern unsigned int mcf_gpio_chips_size; - -int mcf_gpio_direction_input(struct gpio_chip *, unsigned); -int mcf_gpio_get_value(struct gpio_chip *, unsigned); -int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int); -void mcf_gpio_set_value(struct gpio_chip *, unsigned, int); -void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int); -int mcf_gpio_request(struct gpio_chip *, unsigned); -void mcf_gpio_free(struct gpio_chip *, unsigned); /* - * Define macros to ease the pain of setting up the GPIO tables. There - * are two cases we need to deal with here, they cover all currently - * available ColdFire GPIO hardware. There are of course minor differences - * in the layout and number of bits in each ColdFire part, but the macros - * take all that in. + * The Freescale Coldfire family is quite varied in how they implement GPIO. + * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have + * only one port, others have multiple ports; some have a single data latch + * for both input and output, others have a separate pin data register to read + * input; some require a read-modify-write access to change an output, others + * have set and clear registers for some of the outputs; Some have all the + * GPIOs in a single control area, others have some GPIOs implemented in + * different modules. * - * Firstly is the conventional GPIO registers where we toggle individual - * bits in a register, preserving the other bits in the register. For - * lack of a better term I have called this the slow method. + * This implementation attempts accommodate the differences while presenting + * a generic interface that will optimize to as few instructions as possible. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M5441x) + +/* These parts have GPIO organized by 8 bit ports */ + +#define MCFGPIO_PORTTYPE u8 +#define MCFGPIO_PORTSIZE 8 +#define mcfgpio_read(port) __raw_readb(port) +#define mcfgpio_write(data, port) __raw_writeb(data, port) + +#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272) + +/* These parts have GPIO organized by 16 bit ports */ + +#define MCFGPIO_PORTTYPE u16 +#define MCFGPIO_PORTSIZE 16 +#define mcfgpio_read(port) __raw_readw(port) +#define mcfgpio_write(data, port) __raw_writew(data, port) + +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + +/* These parts have GPIO organized by 32 bit ports */ + +#define MCFGPIO_PORTTYPE u32 +#define MCFGPIO_PORTSIZE 32 +#define mcfgpio_read(port) __raw_readl(port) +#define mcfgpio_write(data, port) __raw_writel(data, port) + +#endif + +#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE)) +#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE) + +#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +/* + * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses + * read-modify-write to change an output and a GPIO module which has separate + * set/clr registers to directly change outputs with a single write access. + */ +#if defined(CONFIG_M528x) +/* + * The 528x also has GPIOs in other modules (GPT, QADC) which use + * read-modify-write as well as those controlled by the EPORT and GPIO modules. */ -#define MCFGPS(mlabel, mbase, mngpio, mpddr, mpodr, mppdr) \ - { \ - .gpio_chip = { \ - .label = #mlabel, \ - .request = mcf_gpio_request, \ - .free = mcf_gpio_free, \ - .direction_input = mcf_gpio_direction_input, \ - .direction_output = mcf_gpio_direction_output,\ - .get = mcf_gpio_get_value, \ - .set = mcf_gpio_set_value, \ - .base = mbase, \ - .ngpio = mngpio, \ - }, \ - .pddr = (void __iomem *) mpddr, \ - .podr = (void __iomem *) mpodr, \ - .ppdr = (void __iomem *) mppdr, \ - } +#define MCFGPIO_SCR_START 40 +#elif defined(CONFIGM5441x) +/* The m5441x EPORT doesn't have its own GPIO port, uses PORT C */ +#define MCFGPIO_SCR_START 0 +#else +#define MCFGPIO_SCR_START 8 +#endif +#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) + +#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) +#else + +#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX +/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */ +#define MCFGPIO_SETR_PORT(gpio) 0 +#define MCFGPIO_CLRR_PORT(gpio) 0 + +#endif /* - * Secondly is the faster case, where we have set and clear registers - * that allow us to set or clear a bit with a single write, not having - * to worry about preserving other bits. + * Coldfire specific helper functions */ -#define MCFGPF(mlabel, mbase, mngpio) \ - { \ - .gpio_chip = { \ - .label = #mlabel, \ - .request = mcf_gpio_request, \ - .free = mcf_gpio_free, \ - .direction_input = mcf_gpio_direction_input, \ - .direction_output = mcf_gpio_direction_output,\ - .get = mcf_gpio_get_value, \ - .set = mcf_gpio_set_value_fast, \ - .base = mbase, \ - .ngpio = mngpio, \ - }, \ - .pddr = (void __iomem *) MCFGPIO_PDDR_##mlabel, \ - .podr = (void __iomem *) MCFGPIO_PODR_##mlabel, \ - .ppdr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \ - .setr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \ - .clrr = (void __iomem *) MCFGPIO_PCLRR_##mlabel, \ - } +/* return the port pin data register for a gpio */ +static inline u32 __mcfgpio_ppdr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + if (gpio < 32) + return MCFSIM2_GPIOREAD; + else + return MCFSIM2_GPIO1READ; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if !defined(CONFIG_M5441x) + if (gpio < 8) + return MCFEPORT_EPPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif /* defined(CONFIG_M528x) */ + else +#endif /* !defined(CONFIG_M5441x) */ + return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; #endif +} + +/* return the port output data register for a gpio */ +static inline u32 __mcfgpio_podr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + if (gpio < 32) + return MCFSIM2_GPIOWRITE; + else + return MCFSIM2_GPIO1WRITE; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if !defined(CONFIG_M5441x) + if (gpio < 8) + return MCFEPORT_EPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif /* defined(CONFIG_M528x) */ + else +#endif /* !defined(CONFIG_M5441x) */ + return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; +#endif +} + +/* return the port direction data register for a gpio */ +static inline u32 __mcfgpio_pddr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADDR; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADDR; + else if (gpio < 32) + return MCFSIM_PBDDR; + else + return MCFSIM_PCDDR; +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + if (gpio < 32) + return MCFSIM2_GPIOENABLE; + else + return MCFSIM2_GPIO1ENABLE; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if !defined(CONFIG_M5441x) + if (gpio < 8) + return MCFEPORT_EPDDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTDDR; + else if (gpio < 24) + return MCFGPTB_GPTDDR; + else if (gpio < 32) + return MCFQADC_DDRQA; + else if (gpio < 40) + return MCFQADC_DDRQB; +#endif /* defined(CONFIG_M528x) */ + else +#endif /* !defined(CONFIG_M5441x) */ + return MCFGPIO_PDDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; +#endif +} + +#endif /* mcfgpio_h */ diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h index ebd0304054ad..7a83e619e73b 100644 --- a/arch/m68k/include/asm/mcfsim.h +++ b/arch/m68k/include/asm/mcfsim.h @@ -27,6 +27,9 @@ #elif defined(CONFIG_M5249) #include <asm/m5249sim.h> #include <asm/mcfintc.h> +#elif defined(CONFIG_M525x) +#include <asm/m525xsim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M527x) #include <asm/m527xsim.h> #elif defined(CONFIG_M5272) @@ -43,6 +46,8 @@ #include <asm/mcfintc.h> #elif defined(CONFIG_M54xx) #include <asm/m54xxsim.h> +#elif defined(CONFIG_M5441x) +#include <asm/m5441xsim.h> #endif /****************************************************************************/ diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h index 351c27237874..da2fa43c2e45 100644 --- a/arch/m68k/include/asm/mcftimer.h +++ b/arch/m68k/include/asm/mcftimer.h @@ -19,7 +19,7 @@ #define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ #define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ #define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ -#if defined(CONFIG_M532x) +#if defined(CONFIG_M532x) || defined(CONFIG_M5441x) #define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ #else #define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h index 2d3bc774b3c5..b40c20f66647 100644 --- a/arch/m68k/include/asm/mcfuart.h +++ b/arch/m68k/include/asm/mcfuart.h @@ -43,8 +43,8 @@ struct mcf_platform_uart { #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #endif #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5249) || defined(CONFIG_M5307) || \ - defined(CONFIG_M5407) + defined(CONFIG_M5249) || defined(CONFIG_M525x) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #endif #define MCFUART_UIPR 0x34 /* Input Port (r) */ diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h index 4ad0aea48ab4..848c3dfaad50 100644 --- a/arch/m68k/include/asm/pci.h +++ b/arch/m68k/include/asm/pci.h @@ -2,6 +2,7 @@ #define _ASM_M68K_PCI_H #include <asm-generic/pci-dma-compat.h> +#include <asm-generic/pci.h> /* The PCI address space does equal the physical memory * address space. The networking and block device layers use @@ -9,4 +10,9 @@ */ #define PCI_DMA_BUS_IS_PHYS (1) +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x00000100 +#define PCIBIOS_MIN_MEM 0x02000000 + #endif /* _ASM_M68K_PCI_H */ diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h deleted file mode 100644 index 119ee686dbd1..000000000000 --- a/arch/m68k/include/asm/pinmux.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Coldfire generic GPIO pinmux support. - * - * (C) Copyright 2009, Steven King <sfking@fdwdc.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef pinmux_h -#define pinmux_h - -#define MCFPINMUX_NONE -1 - -extern int mcf_pinmux_request(unsigned, unsigned); -extern void mcf_pinmux_release(unsigned, unsigned); - -static inline int mcf_pinmux_is_valid(unsigned pinmux) -{ - return pinmux != MCFPINMUX_NONE; -} - -#endif - |