diff options
Diffstat (limited to 'arch/mips/alchemy/common')
| -rw-r--r-- | arch/mips/alchemy/common/dbdma.c | 123 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/dma.c | 46 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/irq.c | 345 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/platform.c | 250 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/setup.c | 4 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/time.c | 3 |
6 files changed, 401 insertions, 370 deletions
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index ca0506a8585a..3a5abb54d505 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -36,7 +36,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -58,7 +58,8 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); /* I couldn't find a macro that did this... */ #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) -static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static dbdma_global_t *dbdma_gptr = + (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); static int dbdma_initialized; static dbdev_tab_t dbdev_tab[] = { @@ -299,7 +300,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, if (ctp != NULL) { memset(ctp, 0, sizeof(chan_tab_t)); ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; + dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); dcp += (0x0100 * chan); ctp->chan_ptr = (au1x_dma_chan_t *)dcp; cp = (au1x_dma_chan_t *)dcp; @@ -958,105 +959,75 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) } -struct alchemy_dbdma_sysdev { - struct sys_device sysdev; - u32 pm_regs[NUM_DBDMA_CHANS + 1][6]; -}; +static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6]; -static int alchemy_dbdma_suspend(struct sys_device *dev, - pm_message_t state) +static int alchemy_dbdma_suspend(void) { - struct alchemy_dbdma_sysdev *sdev = - container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; - u32 addr; + void __iomem *addr; - addr = DDMA_GLOBAL_BASE; - sdev->pm_regs[0][0] = au_readl(addr + 0x00); - sdev->pm_regs[0][1] = au_readl(addr + 0x04); - sdev->pm_regs[0][2] = au_readl(addr + 0x08); - sdev->pm_regs[0][3] = au_readl(addr + 0x0c); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c); /* save channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - sdev->pm_regs[i][0] = au_readl(addr + 0x00); - sdev->pm_regs[i][1] = au_readl(addr + 0x04); - sdev->pm_regs[i][2] = au_readl(addr + 0x08); - sdev->pm_regs[i][3] = au_readl(addr + 0x0c); - sdev->pm_regs[i][4] = au_readl(addr + 0x10); - sdev->pm_regs[i][5] = au_readl(addr + 0x14); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c); + alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10); + alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14); /* halt channel */ - au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00); - au_sync(); - while (!(au_readl(addr + 0x14) & 1)) - au_sync(); + __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00); + wmb(); + while (!(__raw_readl(addr + 0x14) & 1)) + wmb(); addr += 0x100; /* next channel base */ } /* disable channel interrupts */ - au_writel(0, DDMA_GLOBAL_BASE + 0x0c); - au_sync(); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(0, addr + 0x0c); + wmb(); return 0; } -static int alchemy_dbdma_resume(struct sys_device *dev) +static void alchemy_dbdma_resume(void) { - struct alchemy_dbdma_sysdev *sdev = - container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; - u32 addr; + void __iomem *addr; - addr = DDMA_GLOBAL_BASE; - au_writel(sdev->pm_regs[0][0], addr + 0x00); - au_writel(sdev->pm_regs[0][1], addr + 0x04); - au_writel(sdev->pm_regs[0][2], addr + 0x08); - au_writel(sdev->pm_regs[0][3], addr + 0x0c); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c); /* restore channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - au_writel(sdev->pm_regs[i][0], addr + 0x00); - au_writel(sdev->pm_regs[i][1], addr + 0x04); - au_writel(sdev->pm_regs[i][2], addr + 0x08); - au_writel(sdev->pm_regs[i][3], addr + 0x0c); - au_writel(sdev->pm_regs[i][4], addr + 0x10); - au_writel(sdev->pm_regs[i][5], addr + 0x14); - au_sync(); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c); + __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10); + __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14); + wmb(); addr += 0x100; /* next channel base */ } - - return 0; } -static struct sysdev_class alchemy_dbdma_sysdev_class = { - .name = "dbdma", +static struct syscore_ops alchemy_dbdma_syscore_ops = { .suspend = alchemy_dbdma_suspend, .resume = alchemy_dbdma_resume, }; -static int __init alchemy_dbdma_sysdev_init(void) -{ - struct alchemy_dbdma_sysdev *sdev; - int ret; - - ret = sysdev_class_register(&alchemy_dbdma_sysdev_class); - if (ret) - return ret; - - sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL); - if (!sdev) - return -ENOMEM; - - sdev->sysdev.id = -1; - sdev->sysdev.cls = &alchemy_dbdma_sysdev_class; - ret = sysdev_register(&sdev->sysdev); - if (ret) - kfree(sdev); - - return ret; -} - static int __init au1xxx_dbdma_init(void) { int irq_nr, ret; @@ -1084,11 +1055,7 @@ static int __init au1xxx_dbdma_init(void) else { dbdma_initialized = 1; printk(KERN_INFO "Alchemy DBDMA initialized\n"); - ret = alchemy_dbdma_sysdev_init(); - if (ret) { - printk(KERN_ERR "DBDMA PM init failed\n"); - ret = 0; - } + register_syscore_ops(&alchemy_dbdma_syscore_ops); } return ret; diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d5278877891d..347980e79a89 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -58,6 +58,9 @@ * returned from request_dma. */ +/* DMA Channel register block spacing */ +#define DMA_CHANNEL_LEN 0x00000100 + DEFINE_SPINLOCK(au1000_dma_spin_lock); struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { @@ -77,22 +80,23 @@ static const struct dma_dev { unsigned int fifo_addr; unsigned int dma_mode; } dma_dev_table[DMA_NUM_DEV] = { - {UART0_ADDR + UART_TX, 0}, - {UART0_ADDR + UART_RX, 0}, - {0, 0}, - {0, 0}, - {AC97C_DATA, DMA_DW16 }, /* coherent */ - {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ - {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, - {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0WR, DMA_DW8 | DMA_NC}, - {USBD_EP2WR, DMA_DW8 | DMA_NC}, - {USBD_EP3WR, DMA_DW8 | DMA_NC}, - {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, - {I2S_DATA, DMA_DW32 | DMA_NC}, - {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} + { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */ + { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */ + { 0, 0 }, /* DMA_REQ0 */ + { 0, 0 }, /* DMA_REQ1 */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ + { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ + { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ + { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ }; int au1000_dma_read_proc(char *buf, char **start, off_t fpos, @@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos, /* Device FIFO addresses and default DMA modes - 2nd bank */ static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { - { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ - { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */ }; void dump_au1000_dma_channel(unsigned int dmanr) @@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str, } /* fill it in */ - chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; + chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN; chan->dev_id = dev_id; chan->dev_str = dev_str; chan->fifo_addr = dev->fifo_addr; diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 55dd7c888517..8b60ba0675e2 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -30,7 +30,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> @@ -39,6 +39,36 @@ #include <asm/mach-pb1x00/pb1000.h> #endif +/* Interrupt Controller register offsets */ +#define IC_CFG0RD 0x40 +#define IC_CFG0SET 0x40 +#define IC_CFG0CLR 0x44 +#define IC_CFG1RD 0x48 +#define IC_CFG1SET 0x48 +#define IC_CFG1CLR 0x4C +#define IC_CFG2RD 0x50 +#define IC_CFG2SET 0x50 +#define IC_CFG2CLR 0x54 +#define IC_REQ0INT 0x54 +#define IC_SRCRD 0x58 +#define IC_SRCSET 0x58 +#define IC_SRCCLR 0x5C +#define IC_REQ1INT 0x5C +#define IC_ASSIGNRD 0x60 +#define IC_ASSIGNSET 0x60 +#define IC_ASSIGNCLR 0x64 +#define IC_WAKERD 0x68 +#define IC_WAKESET 0x68 +#define IC_WAKECLR 0x6C +#define IC_MASKRD 0x70 +#define IC_MASKSET 0x70 +#define IC_MASKCLR 0x74 +#define IC_RISINGRD 0x78 +#define IC_RISINGCLR 0x78 +#define IC_FALLINGRD 0x7C +#define IC_FALLINGCLR 0x7C +#define IC_TESTBIT 0x80 + static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); /* NOTE on interrupt priorities: The original writers of this code said: @@ -221,89 +251,101 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = { static void au1x_ic0_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; - au_writel(1 << bit, IC0_MASKSET); - au_writel(1 << bit, IC0_WAKESET); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); } static void au1x_ic1_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; - au_writel(1 << bit, IC1_MASKSET); - au_writel(1 << bit, IC1_WAKESET); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); /* very hacky. does the pb1000 cpld auto-disable this int? * nowhere in the current kernel sources is it disabled. --mlau */ #if defined(CONFIG_MIPS_PB1000) if (d->irq == AU1000_GPIO15_INT) - au_writel(0x4000, PB1000_MDR); /* enable int */ + __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */ #endif - au_sync(); + wmb(); } static void au1x_ic0_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } static void au1x_ic1_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; - au_writel(1 << bit, IC1_MASKCLR); - au_writel(1 << bit, IC1_WAKECLR); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } static void au1x_ic0_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } static void au1x_ic1_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - au_writel(1 << bit, IC1_FALLINGCLR); - au_writel(1 << bit, IC1_RISINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } static void au1x_ic0_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); - au_writel(1 << bit, IC0_WAKECLR); - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_FALLINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } static void au1x_ic1_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); - au_writel(1 << bit, IC1_WAKECLR); - au_writel(1 << bit, IC1_MASKCLR); - au_writel(1 << bit, IC1_RISINGCLR); - au_writel(1 << bit, IC1_FALLINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) @@ -318,13 +360,13 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) return -EINVAL; local_irq_save(flags); - wakemsk = au_readl(SYS_WAKEMSK); + wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK); if (on) wakemsk |= 1 << bit; else wakemsk &= ~(1 << bit); - au_writel(wakemsk, SYS_WAKEMSK); - au_sync(); + __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK); + wmb(); local_irq_restore(flags); return 0; @@ -356,81 +398,74 @@ static struct irq_chip au1x_ic1_chip = { static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) { struct irq_chip *chip; - unsigned long icr[6]; - unsigned int bit, ic, irq = d->irq; + unsigned int bit, irq = d->irq; irq_flow_handler_t handler = NULL; unsigned char *name = NULL; + void __iomem *base; int ret; if (irq >= AU1000_INTC1_INT_BASE) { bit = irq - AU1000_INTC1_INT_BASE; chip = &au1x_ic1_chip; - ic = 1; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq - AU1000_INTC0_INT_BASE; chip = &au1x_ic0_chip; - ic = 0; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } if (bit > 31) return -EINVAL; - icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET; - icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET; - icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET; - icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR; - icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR; - icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR; - ret = 0; switch (flow_type) { /* cfgregs 2:1:0 */ case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "riseedge"; break; case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_edge_irq; name = "falledge"; break; case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "bothedge"; break; case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ - au_writel(1 << bit, icr[2]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_level_irq; name = "hilevel"; break; case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ - au_writel(1 << bit, icr[2]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_level_irq; name = "lowlevel"; break; case IRQ_TYPE_NONE: /* 0:0:0 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0CLR); break; default: ret = -EINVAL; } __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); - au_sync(); + wmb(); return ret; } @@ -444,21 +479,21 @@ asmlinkage void plat_irq_dispatch(void) off = MIPS_CPU_IRQ_BASE + 7; goto handle; } else if (pending & CAUSEF_IP2) { - s = IC0_REQ0INT; + s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT; off = AU1000_INTC0_INT_BASE; } else if (pending & CAUSEF_IP3) { - s = IC0_REQ1INT; + s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT; off = AU1000_INTC0_INT_BASE; } else if (pending & CAUSEF_IP4) { - s = IC1_REQ0INT; + s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT; off = AU1000_INTC1_INT_BASE; } else if (pending & CAUSEF_IP5) { - s = IC1_REQ1INT; + s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT; off = AU1000_INTC1_INT_BASE; } else goto spurious; - s = au_readl(s); + s = __raw_readl((void __iomem *)s); if (unlikely(!s)) { spurious: spurious_interrupt(); @@ -469,48 +504,42 @@ handle: do_IRQ(off); } + +static inline void ic_init(void __iomem *base) +{ + /* initialize interrupt controller to a safe state */ + __raw_writel(0xffffffff, base + IC_CFG0CLR); + __raw_writel(0xffffffff, base + IC_CFG1CLR); + __raw_writel(0xffffffff, base + IC_CFG2CLR); + __raw_writel(0xffffffff, base + IC_MASKCLR); + __raw_writel(0xffffffff, base + IC_ASSIGNCLR); + __raw_writel(0xffffffff, base + IC_WAKECLR); + __raw_writel(0xffffffff, base + IC_SRCSET); + __raw_writel(0xffffffff, base + IC_FALLINGCLR); + __raw_writel(0xffffffff, base + IC_RISINGCLR); + __raw_writel(0x00000000, base + IC_TESTBIT); + wmb(); +} + static void __init au1000_init_irq(struct au1xxx_irqmap *map) { unsigned int bit, irq_nr; - int i; - - /* - * Initialize interrupt controllers to a safe state. - */ - au_writel(0xffffffff, IC0_CFG0CLR); - au_writel(0xffffffff, IC0_CFG1CLR); - au_writel(0xffffffff, IC0_CFG2CLR); - au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNCLR); - au_writel(0xffffffff, IC0_WAKECLR); - au_writel(0xffffffff, IC0_SRCSET); - au_writel(0xffffffff, IC0_FALLINGCLR); - au_writel(0xffffffff, IC0_RISINGCLR); - au_writel(0x00000000, IC0_TESTBIT); - - au_writel(0xffffffff, IC1_CFG0CLR); - au_writel(0xffffffff, IC1_CFG1CLR); - au_writel(0xffffffff, IC1_CFG2CLR); - au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNCLR); - au_writel(0xffffffff, IC1_WAKECLR); - au_writel(0xffffffff, IC1_SRCSET); - au_writel(0xffffffff, IC1_FALLINGCLR); - au_writel(0xffffffff, IC1_RISINGCLR); - au_writel(0x00000000, IC1_TESTBIT); + void __iomem *base; + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); mips_cpu_irq_init(); /* register all 64 possible IC0+IC1 irq sources as type "none". * Use set_irq_type() to set edge/level behaviour at runtime. */ - for (i = AU1000_INTC0_INT_BASE; - (i < AU1000_INTC0_INT_BASE + 32); i++) - au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + for (irq_nr = AU1000_INTC0_INT_BASE; + (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); - for (i = AU1000_INTC1_INT_BASE; - (i < AU1000_INTC1_INT_BASE + 32); i++) - au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + for (irq_nr = AU1000_INTC1_INT_BASE; + (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); /* * Initialize IC0, which is fixed per processor. @@ -520,13 +549,13 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map) if (irq_nr >= AU1000_INTC1_INT_BASE) { bit = irq_nr - AU1000_INTC1_INT_BASE; - if (map->im_request) - au_writel(1 << bit, IC1_ASSIGNSET); + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq_nr - AU1000_INTC0_INT_BASE; - if (map->im_request) - au_writel(1 << bit, IC0_ASSIGNSET); + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } + if (map->im_request) + __raw_writel(1 << bit, base + IC_ASSIGNSET); au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type); ++map; @@ -556,90 +585,62 @@ void __init arch_init_irq(void) } } -struct alchemy_ic_sysdev { - struct sys_device sysdev; - void __iomem *base; - unsigned long pmdata[7]; -}; -static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct alchemy_ic_sysdev *icdev = - container_of(dev, struct alchemy_ic_sysdev, sysdev); +static unsigned long alchemy_ic_pmdata[7 * 2]; - icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD); - icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD); - icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD); - icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD); - icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD); - icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD); - icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD); - - return 0; +static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) +{ + d[0] = __raw_readl(base + IC_CFG0RD); + d[1] = __raw_readl(base + IC_CFG1RD); + d[2] = __raw_readl(base + IC_CFG2RD); + d[3] = __raw_readl(base + IC_SRCRD); + d[4] = __raw_readl(base + IC_ASSIGNRD); + d[5] = __raw_readl(base + IC_WAKERD); + d[6] = __raw_readl(base + IC_MASKRD); + ic_init(base); /* shut it up too while at it */ } -static int alchemy_ic_resume(struct sys_device *dev) +static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) { - struct alchemy_ic_sysdev *icdev = - container_of(dev, struct alchemy_ic_sysdev, sysdev); - - __raw_writel(0xffffffff, icdev->base + IC_MASKCLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR); - __raw_writel(0xffffffff, icdev->base + IC_SRCCLR); - __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR); - __raw_writel(0xffffffff, icdev->base + IC_WAKECLR); - __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR); - __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR); - __raw_writel(0x00000000, icdev->base + IC_TESTBIT); - wmb(); - __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET); - __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET); - __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET); - __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET); - __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET); - __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET); + ic_init(base); + + __raw_writel(d[0], base + IC_CFG0SET); + __raw_writel(d[1], base + IC_CFG1SET); + __raw_writel(d[2], base + IC_CFG2SET); + __raw_writel(d[3], base + IC_SRCSET); + __raw_writel(d[4], base + IC_ASSIGNSET); + __raw_writel(d[5], base + IC_WAKESET); wmb(); - __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET); + __raw_writel(d[6], base + IC_MASKSET); wmb(); +} +static int alchemy_ic_suspend(void) +{ + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_ic_pmdata); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_ic_pmdata[7]); return 0; } -static struct sysdev_class alchemy_ic_sysdev_class = { - .name = "ic", +static void alchemy_ic_resume(void) +{ + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_ic_pmdata[7]); + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_ic_pmdata); +} + +static struct syscore_ops alchemy_ic_syscore_ops = { .suspend = alchemy_ic_suspend, .resume = alchemy_ic_resume, }; -static int __init alchemy_ic_sysdev_init(void) +static int __init alchemy_ic_pm_init(void) { - struct alchemy_ic_sysdev *icdev; - unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR }; - int err, i; - - err = sysdev_class_register(&alchemy_ic_sysdev_class); - if (err) - return err; - - for (i = 0; i < 2; i++) { - icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL); - if (!icdev) - return -ENOMEM; - - icdev->base = ioremap(icbase[i], 0x1000); - - icdev->sysdev.id = i; - icdev->sysdev.cls = &alchemy_ic_sysdev_class; - err = sysdev_register(&icdev->sysdev); - if (err) { - kfree(icdev); - return err; - } - } - + register_syscore_ops(&alchemy_ic_syscore_ops); return 0; } -device_initcall(alchemy_ic_sysdev_init); +device_initcall(alchemy_ic_pm_init); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 9e7814db3d03..3b2c18b14341 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -13,9 +13,10 @@ #include <linux/dma-mapping.h> #include <linux/etherdevice.h> +#include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <linux/init.h> +#include <linux/slab.h> #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -30,21 +31,12 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, #ifdef CONFIG_SERIAL_8250 switch (state) { case 0: - if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) { - /* power-on sequence as suggested in the databooks */ - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); - __raw_writel(1, port->membase + UART_MOD_CNTRL); - wmb(); - } - __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */ - wmb(); + alchemy_uart_enable(CPHYSADDR(port->membase)); serial8250_do_pm(port, state, old_state); break; case 3: /* power off */ serial8250_do_pm(port, state, old_state); - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); + alchemy_uart_disable(CPHYSADDR(port->membase)); break; default: serial8250_do_pm(port, state, old_state); @@ -65,38 +57,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, .pm = alchemy_8250_pm, \ } -static struct plat_serial8250_port au1x00_uart_data[] = { -#if defined(CONFIG_SOC_AU1000) - PORT(UART0_PHYS_ADDR, AU1000_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1000_UART1_INT), - PORT(UART2_PHYS_ADDR, AU1000_UART2_INT), - PORT(UART3_PHYS_ADDR, AU1000_UART3_INT), -#elif defined(CONFIG_SOC_AU1500) - PORT(UART0_PHYS_ADDR, AU1500_UART0_INT), - PORT(UART3_PHYS_ADDR, AU1500_UART3_INT), -#elif defined(CONFIG_SOC_AU1100) - PORT(UART0_PHYS_ADDR, AU1100_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1100_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1100_UART3_INT), -#elif defined(CONFIG_SOC_AU1550) - PORT(UART0_PHYS_ADDR, AU1550_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1550_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1550_UART3_INT), -#elif defined(CONFIG_SOC_AU1200) - PORT(UART0_PHYS_ADDR, AU1200_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1200_UART1_INT), -#endif - { }, +static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { + [ALCHEMY_CPU_AU1000] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), + }, + [ALCHEMY_CPU_AU1500] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), + }, + [ALCHEMY_CPU_AU1100] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), + }, + [ALCHEMY_CPU_AU1550] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), + }, + [ALCHEMY_CPU_AU1200] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), + }, }; static struct platform_device au1xx0_uart_device = { .name = "serial8250", .id = PLAT8250_DEV_AU1X00, - .dev = { - .platform_data = au1x00_uart_data, - }, }; +static void __init alchemy_setup_uarts(int ctype) +{ + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int s = sizeof(struct plat_serial8250_port); + int c = alchemy_get_uarts(ctype); + struct plat_serial8250_port *ports; + + ports = kzalloc(s * (c + 1), GFP_KERNEL); + if (!ports) { + printk(KERN_INFO "Alchemy: no memory for UART data\n"); + return; + } + memcpy(ports, au1x00_uart_data[ctype], s * c); + au1xx0_uart_device.dev.platform_data = ports; + + /* Fill up uartclk. */ + for (s = 0; s < c; s++) + ports[s].uartclk = uartclk; + if (platform_device_register(&au1xx0_uart_device)) + printk(KERN_INFO "Alchemy: failed to register UARTs\n"); +} + /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { @@ -269,8 +283,8 @@ extern struct au1xmmc_platform_data au1xmmc_platdata[2]; static struct resource au1200_mmc0_resources[] = { [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -305,8 +319,8 @@ static struct platform_device au1200_mmc0_device = { #ifndef CONFIG_MIPS_DB1200 static struct resource au1200_mmc1_resources[] = { [0] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -359,15 +373,16 @@ static struct platform_device pbdb_smbus_device = { #endif /* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */ #define MAC_RES(_base, _enable, _irq) \ { \ - .start = CPHYSADDR(_base), \ - .end = CPHYSADDR(_base + 0xffff), \ + .start = _base, \ + .end = _base + 0xffff, \ .flags = IORESOURCE_MEM, \ }, \ { \ - .start = CPHYSADDR(_enable), \ - .end = CPHYSADDR(_enable + 0x3), \ + .start = _enable, \ + .end = _enable + 0x3, \ .flags = IORESOURCE_MEM, \ }, \ { \ @@ -376,19 +391,29 @@ static struct platform_device pbdb_smbus_device = { .flags = IORESOURCE_IRQ \ } -static struct resource au1xxx_eth0_resources[] = { -#if defined(CONFIG_SOC_AU1000) - MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1100) - MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1550) - MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1500) - MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT), -#endif +static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1000_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC0_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR, + AU1500_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1100] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1100_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1550_MAC0_DMA_INT) + }, }; - static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { .phy1_search_mac0 = 1, }; @@ -396,20 +421,26 @@ static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { static struct platform_device au1xxx_eth0_device = { .name = "au1000-eth", .id = 0, - .num_resources = ARRAY_SIZE(au1xxx_eth0_resources), - .resource = au1xxx_eth0_resources, + .num_resources = MAC_RES_COUNT, .dev.platform_data = &au1xxx_eth0_platform_data, }; -#ifndef CONFIG_SOC_AU1100 -static struct resource au1xxx_eth1_resources[] = { -#if defined(CONFIG_SOC_AU1000) - MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT), -#elif defined(CONFIG_SOC_AU1550) - MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT), -#elif defined(CONFIG_SOC_AU1500) - MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT), -#endif +static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1000_MAC1_DMA_INT) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC1_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR + 4, + AU1500_MAC1_DMA_INT) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1550_MAC1_DMA_INT) + }, }; static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { @@ -419,11 +450,9 @@ static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { static struct platform_device au1xxx_eth1_device = { .name = "au1000-eth", .id = 1, - .num_resources = ARRAY_SIZE(au1xxx_eth1_resources), - .resource = au1xxx_eth1_resources, + .num_resources = MAC_RES_COUNT, .dev.platform_data = &au1xxx_eth1_platform_data, }; -#endif void __init au1xxx_override_eth_cfg(unsigned int port, struct au1000_eth_platform_data *eth_data) @@ -434,15 +463,65 @@ void __init au1xxx_override_eth_cfg(unsigned int port, if (port == 0) memcpy(&au1xxx_eth0_platform_data, eth_data, sizeof(struct au1000_eth_platform_data)); -#ifndef CONFIG_SOC_AU1100 else memcpy(&au1xxx_eth1_platform_data, eth_data, sizeof(struct au1000_eth_platform_data)); -#endif +} + +static void __init alchemy_setup_macs(int ctype) +{ + int ret, i; + unsigned char ethaddr[6]; + struct resource *macres; + + /* Handle 1st MAC */ + if (alchemy_get_macs(ctype) < 1) + return; + + macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); + return; + } + memcpy(macres, au1xxx_eth0_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT); + au1xxx_eth0_device.resource = macres; + + i = prom_get_ethernet_addr(ethaddr); + if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) + memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + + ret = platform_device_register(&au1xxx_eth0_device); + if (!ret) + printk(KERN_INFO "Alchemy: failed to register MAC0\n"); + + + /* Handle 2nd MAC */ + if (alchemy_get_macs(ctype) < 2) + return; + + macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); + return; + } + memcpy(macres, au1xxx_eth1_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT); + au1xxx_eth1_device.resource = macres; + + ethaddr[5] += 1; /* next addr for 2nd MAC */ + if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) + memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); + + /* Register second MAC if enabled in pinfunc */ + if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) { + ret = platform_device_register(&au1xxx_eth1_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC1\n"); + } } static struct platform_device *au1xxx_platform_devices[] __initdata = { - &au1xx0_uart_device, &au1xxx_usb_ohci_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, @@ -460,36 +539,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif - &au1xxx_eth0_device, }; static int __init au1xxx_platform_init(void) { - unsigned int uartclk = get_au1x00_uart_baud_base() * 16; - int err, i; - unsigned char ethaddr[6]; + int err, ctype = alchemy_get_cputype(); - /* Fill up uartclk. */ - for (i = 0; au1x00_uart_data[i].flags; i++) - au1x00_uart_data[i].uartclk = uartclk; - - /* use firmware-provided mac addr if available and necessary */ - i = prom_get_ethernet_addr(ethaddr); - if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) - memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + alchemy_setup_uarts(ctype); + alchemy_setup_macs(ctype); err = platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); -#ifndef CONFIG_SOC_AU1100 - ethaddr[5] += 1; /* next addr for 2nd MAC */ - if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) - memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); - - /* Register second MAC if enabled in pinfunc */ - if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) - err = platform_device_register(&au1xxx_eth1_device); -#endif - return err; } diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 561e5da2658b..1b887c868417 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -52,8 +52,6 @@ void __init plat_mem_setup(void) /* this is faster than wasting cycles trying to approximate it */ preset_lpj = (est_freq >> 1) / HZ; - board_setup(); /* board specific setup */ - if (au1xxx_cpu_needs_config_od()) /* Various early Au1xx0 errata corrected by this */ set_c0_config(1 << 19); /* Set Config[OD] */ @@ -61,6 +59,8 @@ void __init plat_mem_setup(void) /* Clear to obtain best system bus performance */ clear_c0_config(1 << 19); /* Clear Config[OD] */ + board_setup(); /* board specific setup */ + /* IO/MEM resources. */ set_io_port_base(0); ioport_resource.start = IOPORT_RESOURCE_START; diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 2aecb2fdf982..d5da6adbf634 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int) goto cntr_err; /* register counter1 clocksource and event device */ - clocksource_set_clock(&au1x_counter1_clocksource, 32768); - clocksource_register(&au1x_counter1_clocksource); + clocksource_register_hz(&au1x_counter1_clocksource, 32768); cd->shift = 32; cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift); |