summaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r--arch/mips/alchemy/devboards/db1300.c47
-rw-r--r--arch/mips/alchemy/devboards/db1550.c9
-rw-r--r--arch/mips/alchemy/devboards/platform.c3
3 files changed, 53 insertions, 6 deletions
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index ef93ee3f6a2c..1c64fdbe4c81 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -21,6 +21,7 @@
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
+#include <linux/wm97xx.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1100_mmc.h>
@@ -711,6 +712,46 @@ static struct platform_device db1300_lcd_dev = {
/**********************************************************************/
+static void db1300_wm97xx_irqen(struct wm97xx *wm, int enable)
+{
+ if (enable)
+ enable_irq(DB1300_AC97_PEN_INT);
+ else
+ disable_irq_nosync(DB1300_AC97_PEN_INT);
+}
+
+static struct wm97xx_mach_ops db1300_wm97xx_ops = {
+ .irq_enable = db1300_wm97xx_irqen,
+ .irq_gpio = WM97XX_GPIO_3,
+};
+
+static int db1300_wm97xx_probe(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+
+ /* external pendown indicator */
+ wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+ WM97XX_GPIO_POL_LOW, WM97XX_GPIO_STICKY,
+ WM97XX_GPIO_WAKE);
+
+ /* internal "virtual" pendown gpio */
+ wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT,
+ WM97XX_GPIO_POL_LOW, WM97XX_GPIO_NOTSTICKY,
+ WM97XX_GPIO_NOWAKE);
+
+ wm->pen_irq = DB1300_AC97_PEN_INT;
+
+ return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops);
+}
+
+static struct platform_driver db1300_wm97xx_driver = {
+ .driver.name = "wm97xx-touch",
+ .driver.owner = THIS_MODULE,
+ .probe = db1300_wm97xx_probe,
+};
+
+/**********************************************************************/
+
static struct platform_device *db1300_dev[] __initdata = {
&db1300_eth_dev,
&db1300_i2c_dev,
@@ -755,6 +796,9 @@ int __init db1300_dev_setup(void)
i2c_register_board_info(0, db1300_i2c_devs,
ARRAY_SIZE(db1300_i2c_devs));
+ if (platform_driver_register(&db1300_wm97xx_driver))
+ pr_warn("DB1300: failed to init touch pen irq support!\n");
+
/* Audio PSC clock is supplied by codecs (PSC1, 2) */
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
@@ -762,9 +806,10 @@ int __init db1300_dev_setup(void)
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
- /* I2C uses internal 48MHz EXTCLK1 */
+ /* I2C driver wants 50MHz, get as close as possible */
c = clk_get(NULL, "psc3_intclk");
if (!IS_ERR(c)) {
+ clk_set_rate(c, 50000000);
clk_prepare_enable(c);
clk_put(c);
}
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 7e89936f763e..0fd5177e35ab 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -34,12 +34,9 @@ static void __init db1550_hw_setup(void)
void __iomem *base;
unsigned long v;
- /* complete SPI setup: link psc0_intclk to a 48MHz source,
- * and assign GPIO16 to PSC0_SYNC1 (SPI cs# line) as well as PSC1_SYNC
- * for AC97 on PB1550.
+ /* complete pin setup: assign GPIO16 to PSC0_SYNC1 (SPI cs# line)
+ * as well as PSC1_SYNC for AC97 on PB1550.
*/
- v = alchemy_rdsys(AU1000_SYS_CLKSRC);
- alchemy_wrsys(v | 0x000001e0, AU1000_SYS_CLKSRC);
v = alchemy_rdsys(AU1000_SYS_PINFUNC);
alchemy_wrsys(v | 1 | SYS_PF_PSC1_S1, AU1000_SYS_PINFUNC);
@@ -586,11 +583,13 @@ int __init db1550_dev_setup(void)
c = clk_get(NULL, "psc0_intclk");
if (!IS_ERR(c)) {
+ clk_set_rate(c, 50000000);
clk_prepare_enable(c);
clk_put(c);
}
c = clk_get(NULL, "psc2_intclk");
if (!IS_ERR(c)) {
+ clk_set_rate(c, db1550_spi_platdata.mainclk_hz);
clk_prepare_enable(c);
clk_put(c);
}
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
index 8df86eb94972..be139a0198b0 100644
--- a/arch/mips/alchemy/devboards/platform.c
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -11,6 +11,7 @@
#include <linux/pm.h>
#include <asm/bootinfo.h>
+#include <asm/idle.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
@@ -53,6 +54,8 @@ static void db1x_power_off(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
+ while (1) /* sit and spin */
+ cpu_wait();
}
static void db1x_reset(char *c)