1 files changed, 0 insertions, 93 deletions
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
deleted file mode 100644
index 043429d17c5f..000000000000
--- a/arch/mips/au1000/common/clocks.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Simple Au1xx0 clocks routines.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <asm/mach-au1x00/au1000.h>
-
-static unsigned int au1x00_clock; /*  Hz */
-static unsigned int lcd_clock;    /* KHz */
-static unsigned long uart_baud_base;
-
-/*
- * Set the au1000_clock
- */
-void set_au1x00_speed(unsigned int new_freq)
-{
-	au1x00_clock = new_freq;
-}
-
-unsigned int get_au1x00_speed(void)
-{
-	return au1x00_clock;
-}
-EXPORT_SYMBOL(get_au1x00_speed);
-
-/*
- * The UART baud base is not known at compile time ... if
- * we want to be able to use the same code on different
- * speed CPUs.
- */
-unsigned long get_au1x00_uart_baud_base(void)
-{
-	return uart_baud_base;
-}
-
-void set_au1x00_uart_baud_base(unsigned long new_baud_base)
-{
-	uart_baud_base = new_baud_base;
-}
-
-/*
- * Calculate the Au1x00's LCD clock based on the current
- * cpu clock and the system bus clock, and try to keep it
- * below 40 MHz (the Pb1000 board can lock-up if the LCD
- * clock is over 40 MHz).
- */
-void set_au1x00_lcd_clock(void)
-{
-	unsigned int static_cfg0;
-	unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
-				  ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
-
-	static_cfg0 = au_readl(MEM_STCFG0);
-
-	if (static_cfg0 & (1 << 11))
-		lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
-	else
-		lcd_clock = sys_busclk / 4;
-
-	if (lcd_clock > 50000) /* Epson MAX */
-		printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
-				    lcd_clock);
-}
-
-unsigned int get_au1x00_lcd_clock(void)
-{
-	return lcd_clock;
-}
-EXPORT_SYMBOL(get_au1x00_lcd_clock);