5 files changed, 44 insertions, 34 deletions

diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index d8df5fdb045f..5c0d35d6e22a 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS];
 /* With some thought, we can probably use the mask to reduce the
  * size of the table.
  */
-struct cpu_spec	cpu_specs[] = {
-    { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
-    { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
-    { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
-    { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
-    { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
-    { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
-    { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
-    { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
-    { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
-    { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
-    { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
-    { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
-    { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
-    { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
-    { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
-    { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+	{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+	{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+	{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+	{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+	{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+	{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+	{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+	{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+	{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+	{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+	{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
 };
 
 void
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index d885e3848ec6..9e4ab80caab6 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -57,7 +57,7 @@ void __init plat_mem_setup(void)
 {
 	struct	cpu_spec *sp;
 	char *argptr;
-	unsigned long prid, cpupll, bclk = 1;
+	unsigned long prid, cpufreq, bclk = 1;
 
 	set_cpuspec();
 	sp = cur_cpu_spec[0];
@@ -65,8 +65,15 @@ void __init plat_mem_setup(void)
 	board_setup();  /* board specific setup */
 
 	prid = read_c0_prid();
-	cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
-	printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+	if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+		cpufreq = 396;
+#endif
+	else
+		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
 
 	bclk = sp->cpu_bclk;
 	if (bclk)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f113b512d7b1..e122bbc6cd88 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@ unsigned long cal_r4koff(void)
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
 		au_writel(0, SYS_TOYWRITE);
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
+	} else
+		no_au1xxx_32khz = 1;
 
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
-			AU1000_SRC_CLK;
-	}
-	else {
-		/* The 32KHz oscillator isn't running, so assume there
-		 * isn't one and grab the processor speed from the PLL.
-		 * NOTE: some old silicon doesn't allow reading the PLL.
-		 */
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
+	else
 		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-		no_au1xxx_32khz = 1;
-	}
 	mips_hpt_frequency = cpu_speed;
 	// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index a9237f41933d..b2e413e597a8 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -33,11 +33,10 @@
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
-#include <asm/keyboard.h>
 #include <asm/mipsregs.h>
 #include <asm/reboot.h>
 #include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 void board_reset(void)
 {
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 389349295d70..a343da134334 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},