diff options
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper.c')
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper.c | 1116 |
1 files changed, 1116 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c new file mode 100644 index 000000000000..fa4963856353 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -0,0 +1,1116 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Helper functions for common, but complicated tasks. + * + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-pip.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-ipd.h> +#include <asm/octeon/cvmx-spi.h> +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-pip-defs.h> +#include <asm/octeon/cvmx-smix-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> + +/** + * cvmx_override_pko_queue_priority(int ipd_port, uint64_t + * priorities[16]) is a function pointer. It is meant to allow + * customization of the PKO queue priorities based on the port + * number. Users should set this pointer to a function before + * calling any cvmx-helper operations. + */ +void (*cvmx_override_pko_queue_priority) (int pko_port, + uint64_t priorities[16]); + +/** + * cvmx_override_ipd_port_setup(int ipd_port) is a function + * pointer. It is meant to allow customization of the IPD port + * setup before packet input/output comes online. It is called + * after cvmx-helper does the default IPD configuration, but + * before IPD is enabled. Users should set this pointer to a + * function before calling any cvmx-helper operations. + */ +void (*cvmx_override_ipd_port_setup) (int ipd_port); + +/* Port count per interface */ +static int interface_port_count[4] = { 0, 0, 0, 0 }; + +/* Port last configured link info index by IPD/PKO port */ +static cvmx_helper_link_info_t + port_link_info[CVMX_PIP_NUM_INPUT_PORTS]; + +/** + * Return the number of interfaces the chip has. Each interface + * may have multiple ports. Most chips support two interfaces, + * but the CNX0XX and CNX1XX are exceptions. These only support + * one interface. + * + * Returns Number of interfaces on chip + */ +int cvmx_helper_get_number_of_interfaces(void) +{ + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) + return 4; + else + return 3; +} + +/** + * Return the number of ports on an interface. Depending on the + * chip and configuration, this can be 1-16. A value of 0 + * specifies that the interface doesn't exist or isn't usable. + * + * @interface: Interface to get the port count for + * + * Returns Number of ports on interface. Can be Zero. + */ +int cvmx_helper_ports_on_interface(int interface) +{ + return interface_port_count[interface]; +} + +/** + * Get the operating mode of an interface. Depending on the Octeon + * chip and configuration, this function returns an enumeration + * of the type of packet I/O supported by an interface. + * + * @interface: Interface to probe + * + * Returns Mode of the interface. Unknown or unsupported interfaces return + * DISABLED. + */ +cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) +{ + union cvmx_gmxx_inf_mode mode; + if (interface == 2) + return CVMX_HELPER_INTERFACE_MODE_NPI; + + if (interface == 3) { + if (OCTEON_IS_MODEL(OCTEON_CN56XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX)) + return CVMX_HELPER_INTERFACE_MODE_LOOP; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + if (interface == 0 + && cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5 + && cvmx_sysinfo_get()->board_rev_major == 1) { + /* + * Lie about interface type of CN3005 board. This + * board has a switch on port 1 like the other + * evaluation boards, but it is connected over RGMII + * instead of GMII. Report GMII mode so that the + * speed is forced to 1 Gbit full duplex. Other than + * some initial configuration (which does not use the + * output of this function) there is no difference in + * setup between GMII and RGMII modes. + */ + return CVMX_HELPER_INTERFACE_MODE_GMII; + } + + /* Interface 1 is always disabled on CN31XX and CN30XX */ + if ((interface == 1) + && (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX))) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + switch (mode.cn56xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 1: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + case 2: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 3: + return CVMX_HELPER_INTERFACE_MODE_PICMG; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else { + if (!mode.s.en) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mode.s.type) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) + return CVMX_HELPER_INTERFACE_MODE_SPI; + else + return CVMX_HELPER_INTERFACE_MODE_GMII; + } else + return CVMX_HELPER_INTERFACE_MODE_RGMII; + } +} + +/** + * Configure the IPD/PIP tagging and QoS options for a specific + * port. This function determines the POW work queue entry + * contents for a port. The setup performed here is controlled by + * the defines in executive-config.h. + * + * @ipd_port: Port to configure. This follows the IPD numbering, not the + * per interface numbering + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_port_setup_ipd(int ipd_port) +{ + union cvmx_pip_prt_cfgx port_config; + union cvmx_pip_prt_tagx tag_config; + + port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + tag_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_TAGX(ipd_port)); + + /* Have each port go to a different POW queue */ + port_config.s.qos = ipd_port & 0x7; + + /* Process the headers and place the IP header in the work queue */ + port_config.s.mode = CVMX_HELPER_INPUT_PORT_SKIP_MODE; + + tag_config.s.ip6_src_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP; + tag_config.s.ip6_dst_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_IP; + tag_config.s.ip6_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT; + tag_config.s.ip6_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT; + tag_config.s.ip6_nxth_flag = CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER; + tag_config.s.ip4_src_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP; + tag_config.s.ip4_dst_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_IP; + tag_config.s.ip4_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT; + tag_config.s.ip4_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT; + tag_config.s.ip4_pctl_flag = CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL; + tag_config.s.inc_prt_flag = CVMX_HELPER_INPUT_TAG_INPUT_PORT; + tag_config.s.tcp6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.tcp4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.ip6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.ip4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.non_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + /* Put all packets in group 0. Other groups can be used by the app */ + tag_config.s.grp = 0; + + cvmx_pip_config_port(ipd_port, port_config, tag_config); + + /* Give the user a chance to override our setting for each port */ + if (cvmx_override_ipd_port_setup) + cvmx_override_ipd_port_setup(ipd_port); + + return 0; +} + +/** + * This function sets the interface_port_count[interface] correctly, + * without modifying any hardware configuration. Hardware setup of + * the ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_enumerate(int interface) +{ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + interface_port_count[interface] = 0; + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + interface_port_count[interface] = + __cvmx_helper_xaui_enumerate(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + interface_port_count[interface] = + __cvmx_helper_rgmii_enumerate(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + interface_port_count[interface] = + __cvmx_helper_spi_enumerate(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + interface_port_count[interface] = + __cvmx_helper_sgmii_enumerate(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + interface_port_count[interface] = + __cvmx_helper_npi_enumerate(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + interface_port_count[interface] = + __cvmx_helper_loop_enumerate(interface); + break; + } + + interface_port_count[interface] = + __cvmx_helper_board_interface_probe(interface, + interface_port_count + [interface]); + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + +/** + * This function probes an interface to determine the actual + * number of hardware ports connected to it. It doesn't setup the + * ports or enable them. The main goal here is to set the global + * interface_port_count[interface] correctly. Hardware setup of the + * ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_probe(int interface) +{ + cvmx_helper_interface_enumerate(interface); + /* At this stage in the game we don't want packets to be moving yet. + The following probe calls should perform hardware setup + needed to determine port counts. Receive must still be disabled */ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + __cvmx_helper_xaui_probe(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + __cvmx_helper_rgmii_probe(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + __cvmx_helper_spi_probe(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + __cvmx_helper_sgmii_probe(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + __cvmx_helper_npi_probe(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + __cvmx_helper_loop_probe(interface); + break; + } + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + +/** + * Setup the IPD/PIP for the ports on an interface. Packet + * classification and tagging are set for every port on the + * interface. The number of ports on the interface must already + * have been probed. + * + * @interface: Interface to setup IPD/PIP for + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_interface_setup_ipd(int interface) +{ + int ipd_port = cvmx_helper_get_ipd_port(interface, 0); + int num_ports = interface_port_count[interface]; + + while (num_ports--) { + __cvmx_helper_port_setup_ipd(ipd_port); + ipd_port++; + } + return 0; +} + +/** + * Setup global setting for IPD/PIP not related to a specific + * interface or port. This must be called before IPD is enabled. + * + * Returns Zero on success, negative on failure. + */ +static int __cvmx_helper_global_setup_ipd(void) +{ + /* Setup the global packet input options */ + cvmx_ipd_config(CVMX_FPA_PACKET_POOL_SIZE / 8, + CVMX_HELPER_FIRST_MBUFF_SKIP / 8, + CVMX_HELPER_NOT_FIRST_MBUFF_SKIP / 8, + /* The +8 is to account for the next ptr */ + (CVMX_HELPER_FIRST_MBUFF_SKIP + 8) / 128, + /* The +8 is to account for the next ptr */ + (CVMX_HELPER_NOT_FIRST_MBUFF_SKIP + 8) / 128, + CVMX_FPA_WQE_POOL, + CVMX_IPD_OPC_MODE_STT, + CVMX_HELPER_ENABLE_BACK_PRESSURE); + return 0; +} + +/** + * Setup the PKO for the ports on an interface. The number of + * queues per port and the priority of each PKO output queue + * is set here. PKO must be disabled when this function is called. + * + * @interface: Interface to setup PKO for + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_interface_setup_pko(int interface) +{ + /* + * Each packet output queue has an associated priority. The + * higher the priority, the more often it can send a packet. A + * priority of 8 means it can send in all 8 rounds of + * contention. We're going to make each queue one less than + * the last. The vector of priorities has been extended to + * support CN5xxx CPUs, where up to 16 queues can be + * associated to a port. To keep backward compatibility we + * don't change the initial 8 priorities and replicate them in + * the second half. With per-core PKO queues (PKO lockless + * operation) all queues have the same priority. + */ + uint64_t priorities[16] = + { 8, 7, 6, 5, 4, 3, 2, 1, 8, 7, 6, 5, 4, 3, 2, 1 }; + + /* + * Setup the IPD/PIP and PKO for the ports discovered + * above. Here packet classification, tagging and output + * priorities are set. + */ + int ipd_port = cvmx_helper_get_ipd_port(interface, 0); + int num_ports = interface_port_count[interface]; + while (num_ports--) { + /* + * Give the user a chance to override the per queue + * priorities. + */ + if (cvmx_override_pko_queue_priority) + cvmx_override_pko_queue_priority(ipd_port, priorities); + + cvmx_pko_config_port(ipd_port, + cvmx_pko_get_base_queue_per_core(ipd_port, + 0), + cvmx_pko_get_num_queues(ipd_port), + priorities); + ipd_port++; + } + return 0; +} + +/** + * Setup global setting for PKO not related to a specific + * interface or port. This must be called before PKO is enabled. + * + * Returns Zero on success, negative on failure. + */ +static int __cvmx_helper_global_setup_pko(void) +{ + /* + * Disable tagwait FAU timeout. This needs to be done before + * anyone might start packet output using tags. + */ + union cvmx_iob_fau_timeout fau_to; + fau_to.u64 = 0; + fau_to.s.tout_val = 0xfff; + fau_to.s.tout_enb = 0; + cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_to.u64); + return 0; +} + +/** + * Setup global backpressure setting. + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_global_setup_backpressure(void) +{ +#if CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE + /* Disable backpressure if configured to do so */ + /* Disable backpressure (pause frame) generation */ + int num_interfaces = cvmx_helper_get_number_of_interfaces(); + int interface; + for (interface = 0; interface < num_interfaces; interface++) { + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + case CVMX_HELPER_INTERFACE_MODE_XAUI: + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + case CVMX_HELPER_INTERFACE_MODE_SPI: + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + cvmx_gmx_set_backpressure_override(interface, 0xf); + break; + } + } +#endif + + return 0; +} + +/** + * Enable packet input/output from the hardware. This function is + * called after all internal setup is complete and IPD is enabled. + * After this function completes, packets will be accepted from the + * hardware ports. PKO should still be disabled to make sure packets + * aren't sent out partially setup hardware. + * + * @interface: Interface to enable + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_packet_hardware_enable(int interface) +{ + int result = 0; + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + /* Nothing to do */ + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_enable(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = __cvmx_helper_rgmii_enable(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_enable(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_enable(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + result = __cvmx_helper_npi_enable(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + result = __cvmx_helper_loop_enable(interface); + break; + } + result |= __cvmx_helper_board_hardware_enable(interface); + return result; +} + +/** + * Function to adjust internal IPD pointer alignments + * + * Returns 0 on success + * !0 on failure + */ +int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) +{ +#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES \ + (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_FIRST_MBUFF_SKIP) +#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES \ + (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_NOT_FIRST_MBUFF_SKIP) +#define FIX_IPD_OUTPORT 0 + /* Ports 0-15 are interface 0, 16-31 are interface 1 */ +#define INTERFACE(port) (port >> 4) +#define INDEX(port) (port & 0xf) + uint64_t *p64; + cvmx_pko_command_word0_t pko_command; + union cvmx_buf_ptr g_buffer, pkt_buffer; + cvmx_wqe_t *work; + int size, num_segs = 0, wqe_pcnt, pkt_pcnt; + union cvmx_gmxx_prtx_cfg gmx_cfg; + int retry_cnt; + int retry_loop_cnt; + int i; + cvmx_helper_link_info_t link_info; + + /* Save values for restore at end */ + uint64_t prtx_cfg = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + uint64_t tx_ptr_en = + cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); + uint64_t rx_ptr_en = + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); + uint64_t rxx_jabber = + cvmx_read_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + uint64_t frame_max = + cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + + /* Configure port to gig FDX as required for loopback mode */ + cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT); + + /* + * Disable reception on all ports so if traffic is present it + * will not interfere. + */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0); + + cvmx_wait(100000000ull); + + for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) { + retry_cnt = 100000; + wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT); + pkt_pcnt = (wqe_pcnt >> 7) & 0x7f; + wqe_pcnt &= 0x7f; + + num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3; + + if (num_segs == 0) + goto fix_ipd_exit; + + num_segs += 1; + + size = + FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES + + ((num_segs - 1) * FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) - + (FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2); + + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + CVMX_SYNC; + + g_buffer.u64 = 0; + g_buffer.s.addr = + cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL)); + if (g_buffer.s.addr == 0) { + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "buffer allocation failure.\n"); + goto fix_ipd_exit; + } + + g_buffer.s.pool = CVMX_FPA_WQE_POOL; + g_buffer.s.size = num_segs; + + pkt_buffer.u64 = 0; + pkt_buffer.s.addr = + cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL)); + if (pkt_buffer.s.addr == 0) { + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "buffer allocation failure.\n"); + goto fix_ipd_exit; + } + pkt_buffer.s.i = 1; + pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL; + pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES; + + p64 = (uint64_t *) cvmx_phys_to_ptr(pkt_buffer.s.addr); + p64[0] = 0xffffffffffff0000ull; + p64[1] = 0x08004510ull; + p64[2] = ((uint64_t) (size - 14) << 48) | 0x5ae740004000ull; + p64[3] = 0x3a5fc0a81073c0a8ull; + + for (i = 0; i < num_segs; i++) { + if (i > 0) + pkt_buffer.s.size = + FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES; + + if (i == (num_segs - 1)) + pkt_buffer.s.i = 0; + + *(uint64_t *) cvmx_phys_to_ptr(g_buffer.s.addr + + 8 * i) = pkt_buffer.u64; + } + + /* Build the PKO command */ + pko_command.u64 = 0; + pko_command.s.segs = num_segs; + pko_command.s.total_bytes = size; + pko_command.s.dontfree = 0; + pko_command.s.gather = 1; + + gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT))); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + + cvmx_write_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); + + cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT, + cvmx_pko_get_base_queue + (FIX_IPD_OUTPORT), + CVMX_PKO_LOCK_CMD_QUEUE); + cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT, + cvmx_pko_get_base_queue + (FIX_IPD_OUTPORT), pko_command, + g_buffer, CVMX_PKO_LOCK_CMD_QUEUE); + + CVMX_SYNC; + + do { + work = cvmx_pow_work_request_sync(CVMX_POW_WAIT); + retry_cnt--; + } while ((work == NULL) && (retry_cnt > 0)); + + if (!retry_cnt) + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "get_work() timeout occurred.\n"); + + /* Free packet */ + if (work) + cvmx_helper_free_packet_data(work); + } + +fix_ipd_exit: + + /* Return CSR configs to saved values */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + prtx_cfg); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + tx_ptr_en); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + rx_ptr_en); + cvmx_write_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + rxx_jabber); + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + frame_max); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0); + /* Set link to down so autonegotiation will set it up again */ + link_info.u64 = 0; + cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info); + + /* + * Bring the link back up as autonegotiation is not done in + * user applications. + */ + cvmx_helper_link_autoconf(FIX_IPD_OUTPORT); + + CVMX_SYNC; + if (num_segs) + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n"); + + return !!num_segs; + +} + +/** + * Called after all internal packet IO paths are setup. This + * function enables IPD/PIP and begins packet input and output. + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_ipd_and_packet_input_enable(void) +{ + int num_interfaces; + int interface; + + /* Enable IPD */ + cvmx_ipd_enable(); + + /* + * Time to enable hardware ports packet input and output. Note + * that at this point IPD/PIP must be fully functional and PKO + * must be disabled + */ + num_interfaces = cvmx_helper_get_number_of_interfaces(); + for (interface = 0; interface < num_interfaces; interface++) { + if (cvmx_helper_ports_on_interface(interface) > 0) + __cvmx_helper_packet_hardware_enable(interface); + } + + /* Finally enable PKO now that the entire path is up and running */ + cvmx_pko_enable(); + + if ((OCTEON_IS_MODEL(OCTEON_CN31XX_PASS1) + || OCTEON_IS_MODEL(OCTEON_CN30XX_PASS1)) + && (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM)) + __cvmx_helper_errata_fix_ipd_ptr_alignment(); + return 0; +} + +/** + * Initialize the PIP, IPD, and PKO hardware to support + * simple priority based queues for the ethernet ports. Each + * port is configured with a number of priority queues based + * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower + * priority than the previous. + * + * Returns Zero on success, non-zero on failure + */ +int cvmx_helper_initialize_packet_io_global(void) +{ + int result = 0; + int interface; + union cvmx_l2c_cfg l2c_cfg; + union cvmx_smix_en smix_en; + const int num_interfaces = cvmx_helper_get_number_of_interfaces(); + + /* + * CN52XX pass 1: Due to a bug in 2nd order CDR, it needs to + * be disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) + __cvmx_helper_errata_qlm_disable_2nd_order_cdr(1); + + /* + * Tell L2 to give the IOB statically higher priority compared + * to the cores. This avoids conditions where IO blocks might + * be starved under very high L2 loads. + */ + l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG); + l2c_cfg.s.lrf_arb_mode = 0; + l2c_cfg.s.rfb_arb_mode = 0; + cvmx_write_csr(CVMX_L2C_CFG, l2c_cfg.u64); + + /* Make sure SMI/MDIO is enabled so we can query PHYs */ + smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(0)); + if (!smix_en.s.en) { + smix_en.s.en = 1; + cvmx_write_csr(CVMX_SMIX_EN(0), smix_en.u64); + } + + /* Newer chips actually have two SMI/MDIO interfaces */ + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && + !OCTEON_IS_MODEL(OCTEON_CN58XX) && + !OCTEON_IS_MODEL(OCTEON_CN50XX)) { + smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(1)); + if (!smix_en.s.en) { + smix_en.s.en = 1; + cvmx_write_csr(CVMX_SMIX_EN(1), smix_en.u64); + } + } + + cvmx_pko_initialize_global(); + for (interface = 0; interface < num_interfaces; interface++) { + result |= cvmx_helper_interface_probe(interface); + if (cvmx_helper_ports_on_interface(interface) > 0) + cvmx_dprintf("Interface %d has %d ports (%s)\n", + interface, + cvmx_helper_ports_on_interface(interface), + cvmx_helper_interface_mode_to_string + (cvmx_helper_interface_get_mode + (interface))); + result |= __cvmx_helper_interface_setup_ipd(interface); + result |= __cvmx_helper_interface_setup_pko(interface); + } + + result |= __cvmx_helper_global_setup_ipd(); + result |= __cvmx_helper_global_setup_pko(); + + /* Enable any flow control and backpressure */ + result |= __cvmx_helper_global_setup_backpressure(); + +#if CVMX_HELPER_ENABLE_IPD + result |= cvmx_helper_ipd_and_packet_input_enable(); +#endif + return result; +} + +/** + * Does core local initialization for packet io + * + * Returns Zero on success, non-zero on failure + */ +int cvmx_helper_initialize_packet_io_local(void) +{ + return cvmx_pko_initialize_local(); +} + +/** + * Auto configure an IPD/PKO port link state and speed. This + * function basically does the equivalent of: + * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port)); + * + * @ipd_port: IPD/PKO port to auto configure + * + * Returns Link state after configure + */ +cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port) +{ + cvmx_helper_link_info_t link_info; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index >= cvmx_helper_ports_on_interface(interface)) { + link_info.u64 = 0; + return link_info; + } + + link_info = cvmx_helper_link_get(ipd_port); + if (link_info.u64 == port_link_info[ipd_port].u64) + return link_info; + + /* If we fail to set the link speed, port_link_info will not change */ + cvmx_helper_link_set(ipd_port, link_info); + + /* + * port_link_info should be the current value, which will be + * different than expect if cvmx_helper_link_set() failed. + */ + return port_link_info[ipd_port]; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + /* The default result will be a down link unless the code below + changes it */ + result.u64 = 0; + + if (index >= cvmx_helper_ports_on_interface(interface)) + return result; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + /* Network links are not supported */ + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_GMII: + if (index == 0) + result = __cvmx_helper_rgmii_link_get(ipd_port); + else { + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + } + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + result = __cvmx_helper_rgmii_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + /* Network links are not supported */ + break; + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). It is normally best to use + * cvmx_helper_link_autoconf() instead. + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info) +{ + int result = -1; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index >= cvmx_helper_ports_on_interface(interface)) + return -1; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_link_set(ipd_port, link_info); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = __cvmx_helper_rgmii_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + break; + } + /* Set the port_link_info here so that the link status is updated + no matter how cvmx_helper_link_set is called. We don't change + the value if link_set failed */ + if (result == 0) + port_link_info[ipd_port].u64 = link_info.u64; + return result; +} + +/** + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +int cvmx_helper_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int result = -1; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index >= cvmx_helper_ports_on_interface(interface)) + return -1; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + case CVMX_HELPER_INTERFACE_MODE_SPI: + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = + __cvmx_helper_xaui_configure_loopback(ipd_port, + enable_internal, + enable_external); + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = + __cvmx_helper_rgmii_configure_loopback(ipd_port, + enable_internal, + enable_external); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = + __cvmx_helper_sgmii_configure_loopback(ipd_port, + enable_internal, + enable_external); + break; + } + return result; +} |