diff options
Diffstat (limited to 'arch/mips/cavium-octeon/setup.c')
| -rw-r--r-- | arch/mips/cavium-octeon/setup.c | 927 |
1 files changed, 927 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c new file mode 100644 index 000000000000..5f4e49ba4713 --- /dev/null +++ b/arch/mips/cavium-octeon/setup.c @@ -0,0 +1,927 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2007 Cavium Networks + * Copyright (C) 2008 Wind River Systems + */ +#include <linux/init.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/serial.h> +#include <linux/types.h> +#include <linux/string.h> /* for memset */ +#include <linux/tty.h> +#include <linux/time.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> + +#include <asm/processor.h> +#include <asm/reboot.h> +#include <asm/smp-ops.h> +#include <asm/system.h> +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/bootinfo.h> +#include <asm/sections.h> +#include <asm/time.h> + +#include <asm/octeon/octeon.h> + +#ifdef CONFIG_CAVIUM_DECODE_RSL +extern void cvmx_interrupt_rsl_decode(void); +extern int __cvmx_interrupt_ecc_report_single_bit_errors; +extern void cvmx_interrupt_rsl_enable(void); +#endif + +extern struct plat_smp_ops octeon_smp_ops; + +#ifdef CONFIG_PCI +extern void pci_console_init(const char *arg); +#endif + +#ifdef CONFIG_CAVIUM_RESERVE32 +extern uint64_t octeon_reserve32_memory; +#endif +static unsigned long long MAX_MEMORY = 512ull << 20; + +struct octeon_boot_descriptor *octeon_boot_desc_ptr; + +struct cvmx_bootinfo *octeon_bootinfo; +EXPORT_SYMBOL(octeon_bootinfo); + +#ifdef CONFIG_CAVIUM_RESERVE32 +uint64_t octeon_reserve32_memory; +EXPORT_SYMBOL(octeon_reserve32_memory); +#endif + +static int octeon_uart; + +extern asmlinkage void handle_int(void); +extern asmlinkage void plat_irq_dispatch(void); + +/** + * Return non zero if we are currently running in the Octeon simulator + * + * Returns + */ +int octeon_is_simulation(void) +{ + return octeon_bootinfo->board_type == CVMX_BOARD_TYPE_SIM; +} +EXPORT_SYMBOL(octeon_is_simulation); + +/** + * Return true if Octeon is in PCI Host mode. This means + * Linux can control the PCI bus. + * + * Returns Non zero if Octeon in host mode. + */ +int octeon_is_pci_host(void) +{ +#ifdef CONFIG_PCI + return octeon_bootinfo->config_flags & CVMX_BOOTINFO_CFG_FLAG_PCI_HOST; +#else + return 0; +#endif +} + +/** + * Get the clock rate of Octeon + * + * Returns Clock rate in HZ + */ +uint64_t octeon_get_clock_rate(void) +{ + if (octeon_is_simulation()) + octeon_bootinfo->eclock_hz = 6000000; + return octeon_bootinfo->eclock_hz; +} +EXPORT_SYMBOL(octeon_get_clock_rate); + +/** + * Write to the LCD display connected to the bootbus. This display + * exists on most Cavium evaluation boards. If it doesn't exist, then + * this function doesn't do anything. + * + * @s: String to write + */ +void octeon_write_lcd(const char *s) +{ + if (octeon_bootinfo->led_display_base_addr) { + void __iomem *lcd_address = + ioremap_nocache(octeon_bootinfo->led_display_base_addr, + 8); + int i; + for (i = 0; i < 8; i++, s++) { + if (*s) + iowrite8(*s, lcd_address + i); + else + iowrite8(' ', lcd_address + i); + } + iounmap(lcd_address); + } +} + +/** + * Return the console uart passed by the bootloader + * + * Returns uart (0 or 1) + */ +int octeon_get_boot_uart(void) +{ + int uart; +#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL + uart = 1; +#else + uart = (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ? + 1 : 0; +#endif + return uart; +} + +/** + * Get the coremask Linux was booted on. + * + * Returns Core mask + */ +int octeon_get_boot_coremask(void) +{ + return octeon_boot_desc_ptr->core_mask; +} + +/** + * Check the hardware BIST results for a CPU + */ +void octeon_check_cpu_bist(void) +{ + const int coreid = cvmx_get_core_num(); + unsigned long long mask; + unsigned long long bist_val; + + /* Check BIST results for COP0 registers */ + mask = 0x1f00000000ull; + bist_val = read_octeon_c0_icacheerr(); + if (bist_val & mask) + pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n", + coreid, bist_val); + + bist_val = read_octeon_c0_dcacheerr(); + if (bist_val & 1) + pr_err("Core%d L1 Dcache parity error: " + "CacheErr(dcache) = 0x%llx\n", + coreid, bist_val); + + mask = 0xfc00000000000000ull; + bist_val = read_c0_cvmmemctl(); + if (bist_val & mask) + pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n", + coreid, bist_val); + + write_octeon_c0_dcacheerr(0); +} + +#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB +/** + * Called on every core to setup the wired tlb entry needed + * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set. + * + */ +static void octeon_hal_setup_per_cpu_reserved32(void *unused) +{ + /* + * The config has selected to wire the reserve32 memory for all + * userspace applications. We need to put a wired TLB entry in for each + * 512MB of reserve32 memory. We only handle double 256MB pages here, + * so reserve32 must be multiple of 512MB. + */ + uint32_t size = CONFIG_CAVIUM_RESERVE32; + uint32_t entrylo0 = + 0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6); + uint32_t entrylo1 = entrylo0 + (256 << 14); + uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20)); + while (size >= 512) { +#if 0 + pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n", + smp_processor_id(), entryhi); +#endif + add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M); + entrylo0 += 512 << 14; + entrylo1 += 512 << 14; + entryhi += 512 << 20; + size -= 512; + } +} +#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */ + +/** + * Called to release the named block which was used to made sure + * that nobody used the memory for something else during + * init. Now we'll free it so userspace apps can use this + * memory region with bootmem_alloc. + * + * This function is called only once from prom_free_prom_memory(). + */ +void octeon_hal_setup_reserved32(void) +{ +#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB + on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1); +#endif +} + +/** + * Reboot Octeon + * + * @command: Command to pass to the bootloader. Currently ignored. + */ +static void octeon_restart(char *command) +{ + /* Disable all watchdogs before soft reset. They don't get cleared */ +#ifdef CONFIG_SMP + int cpu; + for_each_online_cpu(cpu) + cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0); +#else + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); +#endif + + mb(); + while (1) + cvmx_write_csr(CVMX_CIU_SOFT_RST, 1); +} + + +/** + * Permanently stop a core. + * + * @arg: Ignored. + */ +static void octeon_kill_core(void *arg) +{ + mb(); + if (octeon_is_simulation()) { + /* The simulator needs the watchdog to stop for dead cores */ + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); + /* A break instruction causes the simulator stop a core */ + asm volatile ("sync\nbreak"); + } +} + + +/** + * Halt the system + */ +static void octeon_halt(void) +{ + smp_call_function(octeon_kill_core, NULL, 0); + + switch (octeon_bootinfo->board_type) { + case CVMX_BOARD_TYPE_NAO38: + /* Driving a 1 to GPIO 12 shuts off this board */ + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1); + cvmx_write_csr(CVMX_GPIO_TX_SET, 0x1000); + break; + default: + octeon_write_lcd("PowerOff"); + break; + } + + octeon_kill_core(NULL); +} + +#if 0 +/** + * Platform time init specifics. + * Returns + */ +void __init plat_time_init(void) +{ + /* Nothing special here, but we are required to have one */ +} + +#endif + +/** + * Handle all the error condition interrupts that might occur. + * + */ +#ifdef CONFIG_CAVIUM_DECODE_RSL +static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id) +{ + cvmx_interrupt_rsl_decode(); + return IRQ_HANDLED; +} +#endif + +/** + * Return a string representing the system type + * + * Returns + */ +const char *octeon_board_type_string(void) +{ + static char name[80]; + sprintf(name, "%s (%s)", + cvmx_board_type_to_string(octeon_bootinfo->board_type), + octeon_model_get_string(read_c0_prid())); + return name; +} + +const char *get_system_type(void) + __attribute__ ((alias("octeon_board_type_string"))); + +void octeon_user_io_init(void) +{ + union octeon_cvmemctl cvmmemctl; + union cvmx_iob_fau_timeout fau_timeout; + union cvmx_pow_nw_tim nm_tim; + uint64_t cvmctl; + + /* Get the current settings for CP0_CVMMEMCTL_REG */ + cvmmemctl.u64 = read_c0_cvmmemctl(); + /* R/W If set, marked write-buffer entries time out the same + * as as other entries; if clear, marked write-buffer entries + * use the maximum timeout. */ + cvmmemctl.s.dismarkwblongto = 1; + /* R/W If set, a merged store does not clear the write-buffer + * entry timeout state. */ + cvmmemctl.s.dismrgclrwbto = 0; + /* R/W Two bits that are the MSBs of the resultant CVMSEG LM + * word location for an IOBDMA. The other 8 bits come from the + * SCRADDR field of the IOBDMA. */ + cvmmemctl.s.iobdmascrmsb = 0; + /* R/W If set, SYNCWS and SYNCS only order marked stores; if + * clear, SYNCWS and SYNCS only order unmarked + * stores. SYNCWSMARKED has no effect when DISSYNCWS is + * set. */ + cvmmemctl.s.syncwsmarked = 0; + /* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */ + cvmmemctl.s.dissyncws = 0; + /* R/W If set, no stall happens on write buffer full. */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2)) + cvmmemctl.s.diswbfst = 1; + else + cvmmemctl.s.diswbfst = 0; + /* R/W If set (and SX set), supervisor-level loads/stores can + * use XKPHYS addresses with <48>==0 */ + cvmmemctl.s.xkmemenas = 0; + + /* R/W If set (and UX set), user-level loads/stores can use + * XKPHYS addresses with VA<48>==0 */ + cvmmemctl.s.xkmemenau = 0; + + /* R/W If set (and SX set), supervisor-level loads/stores can + * use XKPHYS addresses with VA<48>==1 */ + cvmmemctl.s.xkioenas = 0; + + /* R/W If set (and UX set), user-level loads/stores can use + * XKPHYS addresses with VA<48>==1 */ + cvmmemctl.s.xkioenau = 0; + + /* R/W If set, all stores act as SYNCW (NOMERGE must be set + * when this is set) RW, reset to 0. */ + cvmmemctl.s.allsyncw = 0; + + /* R/W If set, no stores merge, and all stores reach the + * coherent bus in order. */ + cvmmemctl.s.nomerge = 0; + /* R/W Selects the bit in the counter used for DID time-outs 0 + * = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is + * between 1x and 2x this interval. For example, with + * DIDTTO=3, expiration interval is between 16K and 32K. */ + cvmmemctl.s.didtto = 0; + /* R/W If set, the (mem) CSR clock never turns off. */ + cvmmemctl.s.csrckalwys = 0; + /* R/W If set, mclk never turns off. */ + cvmmemctl.s.mclkalwys = 0; + /* R/W Selects the bit in the counter used for write buffer + * flush time-outs (WBFLT+11) is the bit position in an + * internal counter used to determine expiration. The write + * buffer expires between 1x and 2x this interval. For + * example, with WBFLT = 0, a write buffer expires between 2K + * and 4K cycles after the write buffer entry is allocated. */ + cvmmemctl.s.wbfltime = 0; + /* R/W If set, do not put Istream in the L2 cache. */ + cvmmemctl.s.istrnol2 = 0; + /* R/W The write buffer threshold. */ + cvmmemctl.s.wbthresh = 10; + /* R/W If set, CVMSEG is available for loads/stores in + * kernel/debug mode. */ +#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0 + cvmmemctl.s.cvmsegenak = 1; +#else + cvmmemctl.s.cvmsegenak = 0; +#endif + /* R/W If set, CVMSEG is available for loads/stores in + * supervisor mode. */ + cvmmemctl.s.cvmsegenas = 0; + /* R/W If set, CVMSEG is available for loads/stores in user + * mode. */ + cvmmemctl.s.cvmsegenau = 0; + /* R/W Size of local memory in cache blocks, 54 (6912 bytes) + * is max legal value. */ + cvmmemctl.s.lmemsz = CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE; + + + if (smp_processor_id() == 0) + pr_notice("CVMSEG size: %d cache lines (%d bytes)\n", + CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE, + CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128); + + write_c0_cvmmemctl(cvmmemctl.u64); + + /* Move the performance counter interrupts to IRQ 6 */ + cvmctl = read_c0_cvmctl(); + cvmctl &= ~(7 << 7); + cvmctl |= 6 << 7; + write_c0_cvmctl(cvmctl); + + /* Set a default for the hardware timeouts */ + fau_timeout.u64 = 0; + fau_timeout.s.tout_val = 0xfff; + /* Disable tagwait FAU timeout */ + fau_timeout.s.tout_enb = 0; + cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64); + + nm_tim.u64 = 0; + /* 4096 cycles */ + nm_tim.s.nw_tim = 3; + cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64); + + write_octeon_c0_icacheerr(0); + write_c0_derraddr1(0); +} + +/** + * Early entry point for arch setup + */ +void __init prom_init(void) +{ + struct cvmx_sysinfo *sysinfo; + const int coreid = cvmx_get_core_num(); + int i; + int argc; + struct uart_port octeon_port; +#ifdef CONFIG_CAVIUM_RESERVE32 + int64_t addr = -1; +#endif + /* + * The bootloader passes a pointer to the boot descriptor in + * $a3, this is available as fw_arg3. + */ + octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3; + octeon_bootinfo = + cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr); + cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr)); + + /* + * Only enable the LED controller if we're running on a CN38XX, CN58XX, + * or CN56XX. The CN30XX and CN31XX don't have an LED controller. + */ + if (!octeon_is_simulation() && + octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER)) { + cvmx_write_csr(CVMX_LED_EN, 0); + cvmx_write_csr(CVMX_LED_PRT, 0); + cvmx_write_csr(CVMX_LED_DBG, 0); + cvmx_write_csr(CVMX_LED_PRT_FMT, 0); + cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32); + cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32); + cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0); + cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0); + cvmx_write_csr(CVMX_LED_EN, 1); + } +#ifdef CONFIG_CAVIUM_RESERVE32 + /* + * We need to temporarily allocate all memory in the reserve32 + * region. This makes sure the kernel doesn't allocate this + * memory when it is getting memory from the + * bootloader. Later, after the memory allocations are + * complete, the reserve32 will be freed. + */ +#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB + if (CONFIG_CAVIUM_RESERVE32 & 0x1ff) + pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. " + "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB " + "is set\n"); + else + addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, + 0, 0, 512 << 20, + "CAVIUM_RESERVE32", 0); +#else + /* + * Allocate memory for RESERVED32 aligned on 2MB boundary. This + * is in case we later use hugetlb entries with it. + */ + addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, + 0, 0, 2 << 20, + "CAVIUM_RESERVE32", 0); +#endif + if (addr < 0) + pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); + else + octeon_reserve32_memory = addr; +#endif + +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2 + if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) { + pr_info("Skipping L2 locking due to reduced L2 cache size\n"); + } else { + uint32_t ebase = read_c0_ebase() & 0x3ffff000; +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB + /* TLB refill */ + cvmx_l2c_lock_mem_region(ebase, 0x100); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION + /* General exception */ + cvmx_l2c_lock_mem_region(ebase + 0x180, 0x80); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT + /* Interrupt handler */ + cvmx_l2c_lock_mem_region(ebase + 0x200, 0x80); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT + cvmx_l2c_lock_mem_region(__pa_symbol(handle_int), 0x100); + cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch), 0x80); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY + cvmx_l2c_lock_mem_region(__pa_symbol(memcpy), 0x480); +#endif + } +#endif + + sysinfo = cvmx_sysinfo_get(); + memset(sysinfo, 0, sizeof(*sysinfo)); + sysinfo->system_dram_size = octeon_bootinfo->dram_size << 20; + sysinfo->phy_mem_desc_ptr = + cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr); + sysinfo->core_mask = octeon_bootinfo->core_mask; + sysinfo->exception_base_addr = octeon_bootinfo->exception_base_addr; + sysinfo->cpu_clock_hz = octeon_bootinfo->eclock_hz; + sysinfo->dram_data_rate_hz = octeon_bootinfo->dclock_hz * 2; + sysinfo->board_type = octeon_bootinfo->board_type; + sysinfo->board_rev_major = octeon_bootinfo->board_rev_major; + sysinfo->board_rev_minor = octeon_bootinfo->board_rev_minor; + memcpy(sysinfo->mac_addr_base, octeon_bootinfo->mac_addr_base, + sizeof(sysinfo->mac_addr_base)); + sysinfo->mac_addr_count = octeon_bootinfo->mac_addr_count; + memcpy(sysinfo->board_serial_number, + octeon_bootinfo->board_serial_number, + sizeof(sysinfo->board_serial_number)); + sysinfo->compact_flash_common_base_addr = + octeon_bootinfo->compact_flash_common_base_addr; + sysinfo->compact_flash_attribute_base_addr = + octeon_bootinfo->compact_flash_attribute_base_addr; + sysinfo->led_display_base_addr = octeon_bootinfo->led_display_base_addr; + sysinfo->dfa_ref_clock_hz = octeon_bootinfo->dfa_ref_clock_hz; + sysinfo->bootloader_config_flags = octeon_bootinfo->config_flags; + + + octeon_check_cpu_bist(); + + octeon_uart = octeon_get_boot_uart(); + + /* + * Disable All CIU Interrupts. The ones we need will be + * enabled later. Read the SUM register so we know the write + * completed. + */ + cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), 0); + cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0); + cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0); + cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0); + cvmx_read_csr(CVMX_CIU_INTX_SUM0((coreid * 2))); + +#ifdef CONFIG_SMP + octeon_write_lcd("LinuxSMP"); +#else + octeon_write_lcd("Linux"); +#endif + +#ifdef CONFIG_CAVIUM_GDB + /* + * When debugging the linux kernel, force the cores to enter + * the debug exception handler to break in. + */ + if (octeon_get_boot_debug_flag()) { + cvmx_write_csr(CVMX_CIU_DINT, 1 << cvmx_get_core_num()); + cvmx_read_csr(CVMX_CIU_DINT); + } +#endif + + /* + * BIST should always be enabled when doing a soft reset. L2 + * Cache locking for instance is not cleared unless BIST is + * enabled. Unfortunately due to a chip errata G-200 for + * Cn38XX and CN31XX, BIST msut be disabled on these parts. + */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || + OCTEON_IS_MODEL(OCTEON_CN31XX)) + cvmx_write_csr(CVMX_CIU_SOFT_BIST, 0); + else + cvmx_write_csr(CVMX_CIU_SOFT_BIST, 1); + + /* Default to 64MB in the simulator to speed things up */ + if (octeon_is_simulation()) + MAX_MEMORY = 64ull << 20; + + arcs_cmdline[0] = 0; + argc = octeon_boot_desc_ptr->argc; + for (i = 0; i < argc; i++) { + const char *arg = + cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]); + if ((strncmp(arg, "MEM=", 4) == 0) || + (strncmp(arg, "mem=", 4) == 0)) { + sscanf(arg + 4, "%llu", &MAX_MEMORY); + MAX_MEMORY <<= 20; + if (MAX_MEMORY == 0) + MAX_MEMORY = 32ull << 30; + } else if (strcmp(arg, "ecc_verbose") == 0) { +#ifdef CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC + __cvmx_interrupt_ecc_report_single_bit_errors = 1; + pr_notice("Reporting of single bit ECC errors is " + "turned on\n"); +#endif + } else if (strlen(arcs_cmdline) + strlen(arg) + 1 < + sizeof(arcs_cmdline) - 1) { + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, arg); + } + } + + if (strstr(arcs_cmdline, "console=") == NULL) { +#ifdef CONFIG_GDB_CONSOLE + strcat(arcs_cmdline, " console=gdb"); +#else +#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL + strcat(arcs_cmdline, " console=ttyS0,115200"); +#else + if (octeon_uart == 1) + strcat(arcs_cmdline, " console=ttyS1,115200"); + else + strcat(arcs_cmdline, " console=ttyS0,115200"); +#endif +#endif + } + + if (octeon_is_simulation()) { + /* + * The simulator uses a mtdram device pre filled with + * the filesystem. Also specify the calibration delay + * to avoid calculating it every time. + */ + strcat(arcs_cmdline, " rw root=1f00" + " lpj=60176 slram=root,0x40000000,+1073741824"); + } + + mips_hpt_frequency = octeon_get_clock_rate(); + + octeon_init_cvmcount(); + + _machine_restart = octeon_restart; + _machine_halt = octeon_halt; + + memset(&octeon_port, 0, sizeof(octeon_port)); + /* + * For early_serial_setup we don't set the port type or + * UPF_FIXED_TYPE. + */ + octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ; + octeon_port.iotype = UPIO_MEM; + /* I/O addresses are every 8 bytes */ + octeon_port.regshift = 3; + /* Clock rate of the chip */ + octeon_port.uartclk = mips_hpt_frequency; + octeon_port.fifosize = 64; + octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart); + octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase); + octeon_port.serial_in = octeon_serial_in; + octeon_port.serial_out = octeon_serial_out; +#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL + octeon_port.line = 0; +#else + octeon_port.line = octeon_uart; +#endif + octeon_port.irq = 42 + octeon_uart; + early_serial_setup(&octeon_port); + + octeon_user_io_init(); + register_smp_ops(&octeon_smp_ops); +} + +void __init plat_mem_setup(void) +{ + uint64_t mem_alloc_size; + uint64_t total; + int64_t memory; + + total = 0; + + /* First add the init memory we will be returning. */ + memory = __pa_symbol(&__init_begin) & PAGE_MASK; + mem_alloc_size = (__pa_symbol(&__init_end) & PAGE_MASK) - memory; + if (mem_alloc_size > 0) { + add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM); + total += mem_alloc_size; + } + + /* + * The Mips memory init uses the first memory location for + * some memory vectors. When SPARSEMEM is in use, it doesn't + * verify that the size is big enough for the final + * vectors. Making the smallest chuck 4MB seems to be enough + * to consistantly work. + */ + mem_alloc_size = 4 << 20; + if (mem_alloc_size > MAX_MEMORY) + mem_alloc_size = MAX_MEMORY; + + /* + * When allocating memory, we want incrementing addresses from + * bootmem_alloc so the code in add_memory_region can merge + * regions next to each other. + */ + cvmx_bootmem_lock(); + while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX) + && (total < MAX_MEMORY)) { +#if defined(CONFIG_64BIT) || defined(CONFIG_64BIT_PHYS_ADDR) + memory = cvmx_bootmem_phy_alloc(mem_alloc_size, + __pa_symbol(&__init_end), -1, + 0x100000, + CVMX_BOOTMEM_FLAG_NO_LOCKING); +#elif defined(CONFIG_HIGHMEM) + memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 1ull << 31, + 0x100000, + CVMX_BOOTMEM_FLAG_NO_LOCKING); +#else + memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 512 << 20, + 0x100000, + CVMX_BOOTMEM_FLAG_NO_LOCKING); +#endif + if (memory >= 0) { + /* + * This function automatically merges address + * regions next to each other if they are + * received in incrementing order. + */ + add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM); + total += mem_alloc_size; + } else { + break; + } + } + cvmx_bootmem_unlock(); + +#ifdef CONFIG_CAVIUM_RESERVE32 + /* + * Now that we've allocated the kernel memory it is safe to + * free the reserved region. We free it here so that builtin + * drivers can use the memory. + */ + if (octeon_reserve32_memory) + cvmx_bootmem_free_named("CAVIUM_RESERVE32"); +#endif /* CONFIG_CAVIUM_RESERVE32 */ + + if (total == 0) + panic("Unable to allocate memory from " + "cvmx_bootmem_phy_alloc\n"); +} + + +int prom_putchar(char c) +{ + uint64_t lsrval; + + /* Spin until there is room */ + do { + lsrval = cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart)); + } while ((lsrval & 0x20) == 0); + + /* Write the byte */ + cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c); + return 1; +} + +void prom_free_prom_memory(void) +{ +#ifdef CONFIG_CAVIUM_DECODE_RSL + cvmx_interrupt_rsl_enable(); + + /* Add an interrupt handler for general failures. */ + if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED, + "RML/RSL", octeon_rlm_interrupt)) { + panic("Unable to request_irq(OCTEON_IRQ_RML)\n"); + } +#endif + + /* This call is here so that it is performed after any TLB + initializations. It needs to be after these in case the + CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */ + octeon_hal_setup_reserved32(); +} + +static struct octeon_cf_data octeon_cf_data; + +static int __init octeon_cf_device_init(void) +{ + union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; + unsigned long base_ptr, region_base, region_size; + struct platform_device *pd; + struct resource cf_resources[3]; + unsigned int num_resources; + int i; + int ret = 0; + + /* Setup octeon-cf platform device if present. */ + base_ptr = 0; + if (octeon_bootinfo->major_version == 1 + && octeon_bootinfo->minor_version >= 1) { + if (octeon_bootinfo->compact_flash_common_base_addr) + base_ptr = + octeon_bootinfo->compact_flash_common_base_addr; + } else { + base_ptr = 0x1d000800; + } + + if (!base_ptr) + return ret; + + /* Find CS0 region. */ + for (i = 0; i < 8; i++) { + mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i)); + region_base = mio_boot_reg_cfg.s.base << 16; + region_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (mio_boot_reg_cfg.s.en && base_ptr >= region_base + && base_ptr < region_base + region_size) + break; + } + if (i >= 7) { + /* i and i + 1 are CS0 and CS1, both must be less than 8. */ + goto out; + } + octeon_cf_data.base_region = i; + octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width; + octeon_cf_data.base_region_bias = base_ptr - region_base; + memset(cf_resources, 0, sizeof(cf_resources)); + num_resources = 0; + cf_resources[num_resources].flags = IORESOURCE_MEM; + cf_resources[num_resources].start = region_base; + cf_resources[num_resources].end = region_base + region_size - 1; + num_resources++; + + + if (!(base_ptr & 0xfffful)) { + /* + * Boot loader signals availability of DMA (true_ide + * mode) by setting low order bits of base_ptr to + * zero. + */ + + /* Asume that CS1 immediately follows. */ + mio_boot_reg_cfg.u64 = + cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1)); + region_base = mio_boot_reg_cfg.s.base << 16; + region_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (!mio_boot_reg_cfg.s.en) + goto out; + + cf_resources[num_resources].flags = IORESOURCE_MEM; + cf_resources[num_resources].start = region_base; + cf_resources[num_resources].end = region_base + region_size - 1; + num_resources++; + + octeon_cf_data.dma_engine = 0; + cf_resources[num_resources].flags = IORESOURCE_IRQ; + cf_resources[num_resources].start = OCTEON_IRQ_BOOTDMA; + cf_resources[num_resources].end = OCTEON_IRQ_BOOTDMA; + num_resources++; + } else { + octeon_cf_data.dma_engine = -1; + } + + pd = platform_device_alloc("pata_octeon_cf", -1); + if (!pd) { + ret = -ENOMEM; + goto out; + } + pd->dev.platform_data = &octeon_cf_data; + + ret = platform_device_add_resources(pd, cf_resources, num_resources); + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); +out: + return ret; +} +device_initcall(octeon_cf_device_init); |