diff options
Diffstat (limited to 'arch/mips/include/asm/mach-pnx833x/gpio.h')
| -rw-r--r-- | arch/mips/include/asm/mach-pnx833x/gpio.h | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h deleted file mode 100644 index 85b5b8e26118..000000000000 --- a/arch/mips/include/asm/mach-pnx833x/gpio.h +++ /dev/null @@ -1,159 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * gpio.h: GPIO Support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - */ -#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H -#define __ASM_MIPS_MACH_PNX833X_GPIO_H - -/* BIG FAT WARNING: races danger! - No protections exist here. Current users are only early init code, - when locking is not needed because no concurrency yet exists there, - and GPIO IRQ dispatcher, which does locking. - However, if many uses will ever happen, proper locking will be needed - - including locking between different uses -*/ - -#include <asm/mach-pnx833x/pnx833x.h> - -#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0) -#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0) - -/* Initialize GPIO to a known state */ -static inline void pnx833x_gpio_init(void) -{ - PNX833X_PIO_DIR = 0; - PNX833X_PIO_DIR2 = 0; - PNX833X_PIO_SEL = 0; - PNX833X_PIO_SEL2 = 0; - PNX833X_PIO_INT_EDGE = 0; - PNX833X_PIO_INT_HI = 0; - PNX833X_PIO_INT_LO = 0; - - /* clear any GPIO interrupt requests */ - PNX833X_PIO_INT_CLEAR = 0xffff; - PNX833X_PIO_INT_CLEAR = 0; - PNX833X_PIO_INT_ENABLE = 0; -} - -/* Select GPIO direction for a pin */ -static inline void pnx833x_gpio_select_input(unsigned int pin) -{ - if (pin < 32) - CLEAR_REG_BIT(PNX833X_PIO_DIR, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31); -} -static inline void pnx833x_gpio_select_output(unsigned int pin) -{ - if (pin < 32) - SET_REG_BIT(PNX833X_PIO_DIR, pin); - else - SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31); -} - -/* Select GPIO or alternate function for a pin */ -static inline void pnx833x_gpio_select_function_io(unsigned int pin) -{ - if (pin < 32) - CLEAR_REG_BIT(PNX833X_PIO_SEL, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31); -} -static inline void pnx833x_gpio_select_function_alt(unsigned int pin) -{ - if (pin < 32) - SET_REG_BIT(PNX833X_PIO_SEL, pin); - else - SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31); -} - -/* Read GPIO pin */ -static inline int pnx833x_gpio_read(unsigned int pin) -{ - if (pin < 32) - return (PNX833X_PIO_IN >> pin) & 1; - else - return (PNX833X_PIO_IN2 >> (pin & 31)) & 1; -} - -/* Write GPIO pin */ -static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin) -{ - if (pin < 32) { - if (val) - SET_REG_BIT(PNX833X_PIO_OUT, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_OUT, pin); - } else { - if (val) - SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31); - else - CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31); - } -} - -/* Configure GPIO interrupt */ -#define GPIO_INT_NONE 0 -#define GPIO_INT_LEVEL_LOW 1 -#define GPIO_INT_LEVEL_HIGH 2 -#define GPIO_INT_EDGE_RISING 3 -#define GPIO_INT_EDGE_FALLING 4 -#define GPIO_INT_EDGE_BOTH 5 -static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin) -{ - switch (when) { - case GPIO_INT_LEVEL_LOW: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_LEVEL_HIGH: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_RISING: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_FALLING: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_BOTH: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - default: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - } -} - -/* Enable/disable GPIO interrupt */ -static inline void pnx833x_gpio_enable_irq(unsigned int pin) -{ - SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); -} -static inline void pnx833x_gpio_disable_irq(unsigned int pin) -{ - CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); -} - -/* Clear GPIO interrupt request */ -static inline void pnx833x_gpio_clear_irq(unsigned int pin) -{ - SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); -} - -#endif |