diff options
Diffstat (limited to 'arch/mips/lantiq/xway/reset.c')
| -rw-r--r-- | arch/mips/lantiq/xway/reset.c | 58 |
1 files changed, 51 insertions, 7 deletions
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 22c55f73aa9d..544dbb7fb421 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -28,17 +28,24 @@ #define RCU_RST_REQ 0x0010 /* reset status register */ #define RCU_RST_STAT 0x0014 +/* vr9 gphy registers */ +#define RCU_GFS_ADD0_XRX200 0x0020 +#define RCU_GFS_ADD1_XRX200 0x0068 /* reboot bit */ +#define RCU_RD_GPHY0_XRX200 BIT(31) #define RCU_RD_SRST BIT(30) +#define RCU_RD_GPHY1_XRX200 BIT(29) + /* reset cause */ #define RCU_STAT_SHIFT 26 /* boot selection */ -#define RCU_BOOT_SEL_SHIFT 26 -#define RCU_BOOT_SEL_MASK 0x7 +#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) +#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; +static struct device_node *ltq_rcu_np; /* This function is used by the watchdog driver */ int ltq_reset_cause(void) @@ -52,7 +59,41 @@ EXPORT_SYMBOL_GPL(ltq_reset_cause); unsigned char ltq_boot_select(void) { u32 val = ltq_rcu_r32(RCU_RST_STAT); - return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK; + + if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) + return RCU_BOOT_SEL_XRX200(val); + + return RCU_BOOT_SEL(val); +} + +/* reset / boot a gphy */ +static struct ltq_xrx200_gphy_reset { + u32 rd; + u32 addr; +} xrx200_gphy[] = { + {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, + {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, +}; + +/* reset and boot a gphy. these phys only exist on xrx200 SoC */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) +{ + if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { + dev_err(dev, "this SoC has no GPHY\n"); + return -EINVAL; + } + if (id > 1) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); + + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, + RCU_RST_REQ); + ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, + RCU_RST_REQ); + return 0; } /* reset a io domain for u micro seconds */ @@ -85,14 +126,17 @@ static void ltq_machine_power_off(void) static int __init mips_reboot_setup(void) { struct resource res; - struct device_node *np = - of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + + ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + if (!ltq_rcu_np) + ltq_rcu_np = of_find_compatible_node(NULL, NULL, + "lantiq,rcu-xrx200"); /* check if all the reset register range is available */ - if (!np) + if (!ltq_rcu_np) panic("Failed to load reset resources from devicetree"); - if (of_address_to_resource(np, 0, &res)) + if (of_address_to_resource(ltq_rcu_np, 0, &res)) panic("Failed to get rcu memory range"); if (request_mem_region(res.start, resource_size(&res), res.name) < 0) |