diff options
Diffstat (limited to 'arch/mn10300/kernel/head.S')
| -rw-r--r-- | arch/mn10300/kernel/head.S | 202 |
1 files changed, 198 insertions, 4 deletions
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 14f27f3bfaf4..73e00fc78072 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -19,6 +19,12 @@ #include <asm/frame.inc> #include <asm/param.h> #include <unit/serial.h> +#ifdef CONFIG_SMP +#include <asm/smp.h> +#include <asm/intctl-regs.h> +#include <asm/cpu-regs.h> +#include <proc/smp-regs.h> +#endif /* CONFIG_SMP */ __HEAD @@ -30,17 +36,51 @@ .globl _start .type _start,@function _start: +#ifdef CONFIG_SMP + # + # If this is a secondary CPU (AP), then deal with that elsewhere + # + mov (CPUID),d3 + and CPUID_MASK,d3 + bne startup_secondary + + # + # We're dealing with the primary CPU (BP) here, then. + # Keep BP's D0,D1,D2 register for boot check. + # + + # Set up the Boot IPI for each secondary CPU + mov 0x1,a0 +loop_set_secondary_icr: + mov a0,a1 + asl CROSS_ICR_CPU_SHIFT,a1 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a1 + movhu (a1),d3 + or GxICR_ENABLE|GxICR_LEVEL_0,d3 + movhu d3,(a1) + movhu (a1),d3 # flush + inc a0 + cmp NR_CPUS,a0 + bne loop_set_secondary_icr +#endif /* CONFIG_SMP */ + # save commandline pointer mov d0,a3 # preload the PGD pointer register mov swapper_pg_dir,d0 mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) # turn on the TLBs mov MMUCTR_IIV|MMUCTR_DIV,d0 mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif mov d0,(MMUCTR) # turn on AM33v2 exception handling mode and set the trap table base @@ -51,6 +91,11 @@ _start: mov d0,(TBR) # invalidate and enable both of the caches +#ifdef CONFIG_SMP + mov ECHCTR,a0 + clr d0 + mov d0,(a0) +#endif mov CHCTR,a0 clr d0 movhu d0,(a0) # turn off first @@ -61,18 +106,18 @@ _start: btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy lne -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_CACHE_WBACK #ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 #else mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* CACHE_DISABLED */ +#endif /* NOWRALLOC */ #else mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 #endif /* WBACK */ movhu d0,(a0) # enable -#endif /* NOWRALLOC */ +#endif /* ENABLED */ # turn on RTS on the debug serial port if applicable #ifdef CONFIG_MN10300_UNIT_ASB2305 @@ -206,6 +251,44 @@ __no_parameters: call processor_init[],0 call unit_init[],0 +#ifdef CONFIG_SMP + # mark the primary CPU in cpu_boot_map + mov cpu_boot_map,a0 + mov 0x1,d0 + mov d0,(a0) + + # signal each secondary CPU to begin booting + mov 0x1,d2 # CPU ID + +loop_request_boot_secondary: + mov d2,a0 + # send SMP_BOOT_IPI to secondary CPU + asl CROSS_ICR_CPU_SHIFT,a0 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a0 + movhu (a0),d0 + or GxICR_REQUEST|GxICR_DETECT,d0 + movhu d0,(a0) + movhu (a0),d0 # flush + + # wait up to 100ms for AP's IPI to be received + clr d3 +wait_on_secondary_boot: + mov DELAY_TIME_BOOT_IPI,d0 + call __delay[],0 + inc d3 + mov cpu_boot_map,a0 + mov (a0),d0 + lsr d2,d0 + btst 0x1,d0 + bne 1f + cmp TIME_OUT_COUNT_BOOT_IPI,d3 + bne wait_on_secondary_boot +1: + inc d2 + cmp NR_CPUS,d2 + bne loop_request_boot_secondary +#endif /* CONFIG_SMP */ + #ifdef CONFIG_GDBSTUB call gdbstub_init[],0 @@ -217,7 +300,118 @@ __gdbstub_pause: #endif jmp start_kernel - .size _start, _start-. + .size _start,.-_start + +############################################################################### +# +# Secondary CPU boot point +# +############################################################################### +#ifdef CONFIG_SMP +startup_secondary: + # preload the PGD pointer register + mov swapper_pg_dir,d0 + mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) + + # turn on the TLBs + mov MMUCTR_IIV|MMUCTR_DIV,d0 + mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif + mov d0,(MMUCTR) + + # turn on AM33v2 exception handling mode and set the trap table base + movhu (CPUP),d0 + or CPUP_EXM_AM33V2,d0 + movhu d0,(CPUP) + + # set the interrupt vector table + mov CONFIG_INTERRUPT_VECTOR_BASE,d0 + mov d0,(TBR) + + # invalidate and enable both of the caches + mov ECHCTR,a0 + clr d0 + mov d0,(a0) + mov CHCTR,a0 + clr d0 + movhu d0,(a0) # turn off first + mov CHCTR_ICINV|CHCTR_DCINV,d0 + movhu d0,(a0) + setlb + mov (a0),d0 + btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne + +#ifdef CONFIG_MN10300_CACHE_ENABLED +#ifdef CONFIG_MN10300_CACHE_WBACK +#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 +#endif /* !NOWRALLOC */ +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 +#endif /* WBACK */ + movhu d0,(a0) # enable +#endif /* ENABLED */ + + # Clear the boot IPI interrupt for this CPU + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush + + /* get stack */ + mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0 + mov (CPUID),d0 + and CPUID_MASK,d0 + mulu CONFIG_BOOT_STACK_SIZE,d0 + sub d0,a0 + mov a0,sp + + # init interrupt for AP + call smp_prepare_cpu_init[],0 + + # mark this secondary CPU in cpu_boot_map + mov (CPUID),d0 + mov 0x1,d1 + asl d0,d1 + mov cpu_boot_map,a0 + bset d1,(a0) + + or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts + nop + nop +#ifdef CONFIG_MN10300_CACHE_WBACK + # flush the local cache if it's in writeback mode + call mn10300_local_dcache_flush_inv[],0 + setlb + mov (CHCTR),d0 + btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne +#endif + + # now sleep waiting for further instructions +secondary_sleep: + mov CPUM_SLEEP,d0 + movhu d0,(CPUM) + nop + nop + bra secondary_sleep + .size startup_secondary,.-startup_secondary +#endif /* CONFIG_SMP */ + +############################################################################### +# +# +# +############################################################################### ENTRY(__head_end) /* |