diff options
Diffstat (limited to 'arch/powerpc/boot/dts/motionpro.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/motionpro.dts | 66 |
1 files changed, 28 insertions, 38 deletions
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index ee30805e35cd..76951ab038ee 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -10,12 +10,6 @@ * option) any later version. */ -/* - * WARNING: Do not depend on this tree layout remaining static just yet. - * The MPC5200 device tree conventions are still in flux - * Keep an eye on the linuxppc-dev mailing list for more details - */ - / { model = "promess,motionpro"; compatible = "promess,motionpro"; @@ -47,29 +41,26 @@ soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; - model = "fsl,mpc5200b"; - compatible = "fsl,mpc5200b"; - revision = ""; // from bootloader - device_type = "soc"; + compatible = "fsl,mpc5200b-immr"; ranges = <0 f0000000 0000c000>; reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm","mpc5200-cdm"; + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; reg = <200 38>; }; - mpc5200_pic: pic@500 { + mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - compatible = "mpc5200b-pic","mpc5200-pic"; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <500 80>; }; - gpt@600 { // General Purpose Timer + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <600 10>; interrupts = <1 9 0>; @@ -77,35 +68,35 @@ fsl,has-wdt; }; - gpt@610 { // General Purpose Timer + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <&mpc5200_pic>; }; - gpt@620 { // General Purpose Timer + timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <&mpc5200_pic>; }; - gpt@630 { // General Purpose Timer + timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <&mpc5200_pic>; }; - gpt@640 { // General Purpose Timer + timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <&mpc5200_pic>; }; - gpt@650 { // General Purpose Timer + timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <650 10>; interrupts = <1 e 0>; @@ -130,28 +121,28 @@ }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc","mpc5200-rtc"; + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; mscan@980 { - compatible = "mpc5200b-mscan","mpc5200-mscan"; + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200b-gpio","mpc5200-gpio"; + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; - gpio-wkup@c00 { - compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; + gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; @@ -159,21 +150,21 @@ spi@f00 { - compatible = "mpc5200b-spi","mpc5200-spi"; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { - compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -183,13 +174,13 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb","mpc5200-xlb"; + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment reg = <2000 100>; interrupts = <2 1 0>; @@ -198,7 +189,7 @@ // PSC2 in spi master mode spi@2200 { // PSC2 - compatible = "mpc5200b-psc-spi","mpc5200-psc-spi"; + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; cell-index = <1>; reg = <2200 100>; interrupts = <2 2 0>; @@ -208,7 +199,7 @@ // PSC5 in uart mode serial@2800 { // PSC5 device_type = "serial"; - compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <4>; // Logical port assignment reg = <2800 100>; interrupts = <2 c 0>; @@ -217,22 +208,22 @@ ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec","mpc5200-fec"; + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <3000 800>; - local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; }; ata@3a00 { - compatible = "mpc5200b-ata","mpc5200-ata"; + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { - compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; @@ -240,13 +231,12 @@ }; sram@8000 { - compatible = "mpc5200b-sram","mpc5200-sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <8000 4000>; }; }; lpb { - model = "fsl,lpb"; compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; @@ -288,7 +278,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200b-pci","mpc5200-pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <f0000d00 100>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot |