diff options
Diffstat (limited to 'arch/powerpc/boot/dts/p1023rds.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/p1023rds.dts | 380 |
1 files changed, 22 insertions, 358 deletions
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d3b478242ea9..beb6cb12e59d 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -34,137 +34,30 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/dts-v1/; +/include/ "fsl/p1023si-pre.dtsi" / { model = "fsl,P1023"; compatible = "fsl,P1023RDS"; #address-cells = <2>; #size-cells = <2>; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,P1023@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - cpu1: PowerPC,P1023@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; + interrupt-parent = <&mpic>; memory { device_type = "memory"; }; - soc@ff600000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1023-immr", "simple-bus"; + soc: soc@ff600000 { ranges = <0x0 0x0 0xff600000 0x200000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1023-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1023-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p1023-espi", "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - fsl_dataflash@0 { #address-cells = <1>; #size-cells = <1>; @@ -186,197 +79,14 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,qoriq-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1023-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; dr_mode = "host"; phy_type = "ulpi"; }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30000 0x10000>; - ranges = <0 0x30000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <58 2>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <45 2>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <45 2>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <57 2>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <57 2>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc", - "fsl,p1022-pmc"; - reg = <0xe0070 0x20>; - etsec1_clk: soc-clk@B0{ - fsl,pmcdr-mask = <0x00000080>; - }; - etsec2_clk: soc-clk@B1{ - fsl,pmcdr-mask = <0x00000040>; - }; - etsec3_clk: soc-clk@B2{ - fsl,pmcdr-mask = <0x00000020>; - }; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1023-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1023-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; }; - localbus@ff605000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + lbc: localbus@ff605000 { reg = <0 0xff605000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; /* NOR Flash, BCSR */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 @@ -428,34 +138,18 @@ }; pci0: pcie@ff60a000 { - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - cell-index = <1>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xff60a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 >; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 @@ -467,38 +161,22 @@ }; }; - pci1: pcie@ff609000 { - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - cell-index = <2>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; + board_pci1: pci1: pcie@ff609000 { reg = <0 0xff609000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* * IRQ[4:6] only for PCIe, set to active-high, * IRQ[7] is pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 2 - 0000 0 0 2 &mpic 5 2 - 0000 0 0 3 &mpic 6 2 - 0000 0 0 4 &mpic 7 1 + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 >; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 @@ -511,37 +189,21 @@ }; pci2: pcie@ff60b000 { - cell-index = <3>; - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xff60b000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* * IRQ[8:10] are pulled up on board, set to active-low * IRQ[11] only for PCIe, set to active-high, */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 2 + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 @@ -553,3 +215,5 @@ }; }; }; + +/include/ "fsl/p1023si-post.dtsi" |