diff options
Diffstat (limited to 'arch/powerpc/boot/dts')
57 files changed, 6058 insertions, 1964 deletions
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts new file mode 100644 index 000000000000..26549fca2ed4 --- /dev/null +++ b/arch/powerpc/boot/dts/amigaone.dts @@ -0,0 +1,173 @@ +/* + * AmigaOne Device Tree Source + * + * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "AmigaOne"; + compatible = "eyetech,amigaone"; + coherency-off; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // 33.3 MHz, from U-boot + clock-frequency = <0>; // From U-boot + bus-frequency = <0>; // From U-boot + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; // From U-boot + }; + + pci@80000000 { + device_type = "pci"; + compatible = "mai-logic,articia-s"; + bus-frequency = <33333333>; + bus-range = <0 0xff>; + ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O + 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory + 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA) + // Configuration address and data register. + reg = <0xfec00cf8 4 + 0xfee00cfc 4>; + 8259-interrupt-acknowledge = <0xfef00000>; + // Do not define a interrupt-parent here, if there is no + // interrupt-map property. + #address-cells = <3>; + #size-cells = <2>; + + isa@7 { + device_type = "isa"; + compatible = "pciclass,0601"; + vendor-id = <0x00001106>; + device-id = <0x00000686>; + revision-id = <0x00000010>; + class-code = <0x00060100>; + subsystem-id = <0>; + subsystem-vendor-id = <0>; + devsel-speed = <0x00000001>; + min-grant = <0>; + max-latency = <0>; + /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>; + interrupt-parent = <&i8259>; + #interrupt-cells = <2>; + #address-cells = <2>; + #size-cells = <1>; + + dma-controller@0 { + compatible = "pnpPNP,200"; + reg = <1 0x00000000 0x00000020 + 1 0x00000080 0x00000010 + 1 0x000000c0 0x00000020>; + }; + + i8259: interrupt-controller@20 { + device_type = "interrupt-controller"; + compatible = "pnpPNP,000"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + reserved-interrupts = <2>; + #interrupt-cells = <2>; + }; + + timer@40 { + // Also adds pcspkr to platform devices. + compatible = "pnpPNP,100"; + reg = <1 0x00000040 0x00000020>; + }; + + 8042@60 { + device_type = "8042"; + reg = <1 0x00000060 0x00000001 + 1 0x00000064 0x00000001>; + interrupts = <1 3 12 3>; + #address-cells = <1>; + #size-cells = <0>; + + keyboard@0 { + compatible = "pnpPNP,303"; + reg = <0>; + }; + + mouse@1 { + compatible = "pnpPNP,f03"; + reg = <1>; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 0x00000070 0x00000002>; + interrupts = <8 3>; + }; + + serial@3f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000003f8 0x00000008>; + interrupts = <4 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + serial@2f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000002f8 0x00000008>; + interrupts = <3 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + parallel@378 { + device_type = "parallel"; + // No ECP support for now, otherwise add "pnpPNP,401". + compatible = "pnpPNP,400"; + reg = <1 0x00000378 0x00000003 + 1 0x00000778 0x00000003>; + }; + + fdc@3f0 { + device_type = "fdc"; + compatible = "pnpPNP,700"; + reg = <1 0x000003f0 0x00000008>; + interrupts = <6 3>; + #address-cells = <1>; + #size-cells = <0>; + + disk@0 { + reg = <0>; + }; + }; + }; + }; + + chosen { + linux,stdout-path = "/pci@80000000/isa@7/serial@3f8"; + }; +}; diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 524af7ef9f26..7da84fd7be93 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -181,70 +181,76 @@ phy_type = "ulpi"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 08 e5 11 32 33 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 08 e5 11 32 34 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 8b5ba8261a36..5fd1ad09bdf2 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -127,6 +127,13 @@ dcr-reg = <0x010 0x002>; }; + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; @@ -142,6 +149,20 @@ /*RXDE*/ 0x5 0x4>; }; + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; + + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; + POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; #address-cells = <1>; @@ -245,6 +266,20 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; }; IIC1: i2c@ef600800 { diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 2f74cc4e093e..cee8080aa245 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -17,6 +17,7 @@ compatible = "schindler,cm5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; @@ -74,84 +74,76 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -161,7 +153,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -170,48 +161,34 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 - device_type = "serial"; - compatible = "fsl,mpc5200-psc-uart"; - port-number = <1>; // Logical port assignment + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 - device_type = "serial"; - compatible = "fsl,mpc5200-psc-uart"; - port-number = <2>; // Logical port assignment + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2400 0x100>; interrupts = <2 3 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2c00 { // PSC6 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <5>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -221,10 +198,8 @@ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; @@ -235,7 +210,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -245,9 +219,8 @@ }; }; - lpb { - model = "fsl,lpb"; - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x2000000>; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts new file mode 100644 index 000000000000..4c36186ef946 --- /dev/null +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -0,0 +1,254 @@ +/* + * Digsy MTC board Device Tree Source + * + * Copyright (C) 2009 Semihalf + * + * Based on the CM5200 by M. Balakowicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "intercontrol,digsy-mtc"; + compatible = "intercontrol,digsy-mtc"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x02000000>; // 32MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2600 0x100>; + interrupts = <2 11 0>; + }; + + serial@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + fsl5200-clocking; + + rtc@50 { + compatible = "at,24c08"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + lpb { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xff000000 0x1000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x1000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00a00000>; + }; + partition@f00000 { + label = "u-boot"; + reg = <0x00f00000 0x100000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts new file mode 100644 index 000000000000..d47ad0718759 --- /dev/null +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -0,0 +1,367 @@ +/* + * GE Fanuc PPC9A Device Tree Source + * + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts + */ + +/dts-v1/; + +/ { + model = "GEF_PPC9A"; + compatible = "gef,ppc9a"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,ppc9a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + fpga@4,0 { + compatible = "gef,ppc9a-fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8641-soc", "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + reg = <0xfef00000 0x100000>; // CCSRBAR 1M + bus-frequency = <33333333>; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + }; + }; + + enet1: ethernet@26000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts new file mode 100644 index 000000000000..1569117e5ddc --- /dev/null +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -0,0 +1,367 @@ +/* + * GE Fanuc SBC310 Device Tree Source + * + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts + */ + +/dts-v1/; + +/ { + model = "GEF_SBC310"; + compatible = "gef,sbc310"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe0000000 0x08000000 // Paged Flash 0 + 2 0 0xe8000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00010000>; // FPGA + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x00000000 0x01000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "cfi-flash"; + reg = <1 0 0x8000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x00000000 0x07800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x07800000 0x00800000>; + read-only; + }; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + #interrupt-cells = <2>; + device_type = "watchdog"; + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; +/* + wdt@4,2010 { + #interrupt-cells = <2>; + device_type = "watchdog"; + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; +*/ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@4,8000 { + #gpio-cells = <2>; + compatible = "gef,sbc310-gpio"; + reg = <0x4 0x8000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + reg = <0xfef00000 0x100000>; // CCSRBAR 1M + bus-frequency = <33333333>; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + }; + }; + + enet1: ethernet@26000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index e78c355c7bac..6582dbd36da7 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -71,7 +71,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xf8005000 0x1000>; + reg = <0xfef05000 0x1000>; interrupts = <19 2>; interrupt-parent = <&mpic>; @@ -202,34 +202,37 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0x9 0x4>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&gef_pic>; - interrupts = <0x8 0x4>; - reg = <3>; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + }; }; enet1: ethernet@26000 { diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 2804444812e5..5e6b08ff6f67 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -97,6 +97,13 @@ 0x6 0x4>; /* ECC SEC Error */ }; + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 3bfff47418db..308fe7c29dea 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -124,67 +124,72 @@ }; }; - mdio@24520 { /* For TSECs */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - PHY1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - PHY2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; /* Mac address filled in by bootwrapper */ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&PHY1>; + + mdio@520 { /* For TSECs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + PHY2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; /* Mac address filled in by bootwrapper */ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&PHY2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; mpic: pic@40000 { diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 3f7a5dce8de0..de30b3f9eb26 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -17,6 +17,7 @@ compatible = "fsl,lite5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -58,96 +59,74 @@ // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <2>; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <3>; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <4>; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <5>; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <6>; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <7>; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@900 { compatible = "fsl,mpc5200-mscan"; - cell-index = <0>; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; - cell-index = <1>; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; @@ -155,39 +134,33 @@ compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -196,13 +169,10 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -211,7 +181,6 @@ // cell-index = <1>; // reg = <0x2200 0x100>; // interrupts = <2 2 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -220,27 +189,22 @@ // cell-index = <2>; // reg = <0x2400 0x100>; // interrupts = <2 3 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example //serial@2600 { // PSC4 - // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example //serial@2800 { // PSC5 - // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -249,16 +213,13 @@ // cell-index = <5>; // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; - // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -268,30 +229,24 @@ compatible = "fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@1 { - device_type = "ethernet-phy"; reg = <1>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +254,12 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { - compatible = "fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; @@ -325,7 +278,6 @@ 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 63e3bb48e843..c63e3566479e 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -17,6 +17,7 @@ compatible = "fsl,lite5200b"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -58,136 +59,112 @@ // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <2>; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <3>; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <4>; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <5>; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <6>; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <7>; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -196,13 +173,10 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -211,7 +185,6 @@ // cell-index = <1>; // reg = <0x2200 0x100>; // interrupts = <2 2 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -220,27 +193,22 @@ // cell-index = <2>; // reg = <0x2400 0x100>; // interrupts = <2 3 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example //serial@2600 { // PSC4 - // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example //serial@2800 { // PSC5 - // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -249,49 +217,40 @@ // cell-index = <5>; // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; - // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +258,13 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; + sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; @@ -330,7 +288,6 @@ 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts new file mode 100644 index 000000000000..e297d8b41875 --- /dev/null +++ b/arch/powerpc/boot/dts/media5200.dts @@ -0,0 +1,318 @@ +/* + * Freescale Media5200 board Device Tree Source + * + * Copyright 2009 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * Steven Cavanagh <scavanagh@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,media5200"; + compatible = "fsl,media5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + aliases { + console = &console; + ethernet0 = ð0; + }; + + chosen { + linux,stdout-path = &console; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot + bus-frequency = <132000000>; // 132 MHz + clock-frequency = <396000000>; // 396 MHz + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB RAM + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <132000000>;// 132 MHz + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0x100>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + // PSC6 in uart mode + console: serial@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <5>; + port-number = <0>; // Logical port assignment + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + eth0: ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + fsl5200-clocking; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl5200-clocking; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot + 0xc000 0 0 2 &media5200_fpga 0 3 + 0xc000 0 0 3 &media5200_fpga 0 4 + 0xc000 0 0 4 &media5200_fpga 0 5 + + 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot + 0xc800 0 0 2 &media5200_fpga 0 4 + 0xc800 0 0 3 &media5200_fpga 0 5 + 0xc800 0 0 4 &media5200_fpga 0 2 + + 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI + 0xd000 0 0 2 &media5200_fpga 0 5 + + 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP + >; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xfe000000 0x02000000 + 2 0 0xf0010000 0x00010000 + 3 0 0xf0020000 0x00010000 >; + + flash@0,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <0 0x0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + flash@1,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <1 0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + media5200_fpga: fpga@2,0 { + compatible = "fsl,media5200-fpga"; + interrupt-controller; + #interrupt-cells = <2>; // 0:bank 1:id; no type field + reg = <2 0 0x10000>; + + interrupt-parent = <&mpc5200_pic>; + interrupts = <0 0 3 // IRQ bank 0 + 1 1 3>; // IRQ bank 1 + }; + + uart@3,0 { + compatible = "ti,tl16c752bpt"; + reg = <3 0 0x10000>; + interrupt-parent = <&media5200_fpga>; + interrupts = <0 0 0 1>; // 2 irqs + }; + }; +}; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 52ba6f98b273..7be8ca038676 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -17,6 +17,7 @@ compatible = "promess,motionpro"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; @@ -74,35 +74,30 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; motionpro-led@660 { // Motion-PRO status LED @@ -110,7 +105,6 @@ label = "motionpro-statusled"; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; blink-delay = <100>; // 100 msec }; @@ -119,49 +113,46 @@ label = "motionpro-readyled"; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -171,7 +162,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -180,12 +170,9 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in spi master mode @@ -194,26 +181,20 @@ cell-index = <1>; reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC5 in uart mode serial@2800 { // PSC5 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <4>; // Logical port assignment reg = <0x2800 0x100>; interrupts = <2 12 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -223,10 +204,8 @@ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@2 { - device_type = "ethernet-phy"; reg = <2>; }; }; @@ -235,7 +214,6 @@ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { @@ -244,7 +222,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { @@ -259,8 +236,8 @@ }; }; - lpb { - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xff000000 0x01000000 @@ -273,7 +250,6 @@ compatible = "promess,motionpro-kollmorgen"; reg = <1 0 0x10000>; interrupts = <1 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // 8-bit board CPLD on LocalPlus Bus CS2 diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 3ebf7ec0484c..761faa7b6964 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -180,7 +180,7 @@ #address-cells = <1>; #size-cells = <1>; sleep = <&pmc 0x20000000>; - ranges; + ranges = <0x0 0x24000 0x1000>; cell-index = <0>; device_type = "network"; @@ -195,11 +195,11 @@ fixed-link = <1 1 1000 0 0>; fsl,magic-packet; - mdio@24520 { + mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; + reg = <0x520 0x20>; phy4: ethernet-phy@4 { interrupt-parent = <&ipic>; interrupts = <20 0x8>; @@ -221,6 +221,7 @@ model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <34 0x8 33 0x8 32 0x8>; interrupt-parent = <&ipic>; @@ -229,11 +230,11 @@ sleep = <&pmc 0x10000000>; fsl,magic-packet; - mdio@25520 { + mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; + reg = <0x520 0x20>; tbi1: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 71784165b77e..3f4c5fb988a0 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -22,6 +22,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -188,66 +190,74 @@ phy_type = "utmi"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy0: ethernet-phy@0 { - interrupt-parent = <&ipic>; - interrupts = <20 0x8>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&ipic>; - interrupts = <19 0x8>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = < &phy0 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = < &phy1 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -349,4 +359,66 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc0000000 + 0x02000000 0 0xc0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index dea30910c136..4319bd70a580 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -152,10 +152,21 @@ }; par_io@1400 { + #address-cells = <1>; + #size-cells = <1>; reg = <0x1400 0x100>; + ranges = <3 0x1448 0x18>; + compatible = "fsl,mpc8323-qe-pario"; device_type = "par_io"; num-ports = <7>; + qe_pio_d: gpio-controller@1448 { + #gpio-cells = <2>; + compatible = "fsl,mpc8323-qe-pario-bank"; + reg = <3 0x18>; + gpio-controller; + }; + ucc2pio:ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ @@ -225,12 +236,25 @@ }; spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; cell-index = <0>; compatible = "fsl,spi"; reg = <0x4c0 0x40>; interrupts = <2>; interrupt-parent = <&qeic>; + gpios = <&qe_pio_d 13 0>; mode = "cpu-qe"; + + mmc-slot@0 { + compatible = "fsl,mpc8323rdb-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&qe_pio_d 14 1 + &qe_pio_d 15 0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; }; spi@500 { diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index b5eda94a8e2a..1ae38f0ddef8 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -170,57 +170,52 @@ phy_type = "ulpi"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - /* Vitesse 8201 */ - phy1c: ethernet-phy@1c { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x1c>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy1c>; linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + /* Vitesse 8201 */ + phy1c: ethernet-phy@1c { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; @@ -228,6 +223,18 @@ fixed-link = <1 1 1000 0 0>; linux,network-index = <1>; tbi-handle = <&tbi1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index c87a6015e165..662abe1fb804 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -149,37 +149,41 @@ phy_type = "ulpi"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - /* Vitesse 8201 */ - phy1c: ethernet-phy@1c { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x1c>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy1c>; linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + /* Vitesse 8201 */ + phy1c: ethernet-phy@1c { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index d9adba01c09c..d9f0a2325fa4 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -167,69 +167,76 @@ phy_type = "ulpi"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 1d14d7052e6d..963708017e6c 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -23,6 +23,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -127,21 +129,38 @@ reg = <0x200 0x100>; }; - i2c@3000 { + sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; + }; - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - interrupts = <19 0x8>; + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; }; @@ -174,70 +193,83 @@ interrupts = <38 0x8>; dr_mode = "host"; phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -309,14 +341,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; + sleep = <&pmc 0x03000000>; }; sata@18000 { @@ -324,6 +349,7 @@ reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; }; sata@19000 { @@ -331,6 +357,7 @@ reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; }; /* IPIC @@ -346,6 +373,13 @@ #interrupt-cells = <2>; reg = <0x700 0x100>; }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; }; pci0: pci@e0008500 { @@ -400,6 +434,7 @@ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; clock-frequency = <0>; #interrupt-cells = <1>; #size-cells = <2>; @@ -409,4 +444,68 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 9413af3b9925..053339390c22 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -22,6 +22,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -107,26 +109,72 @@ reg = <0x200 0x100>; }; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; interrupt-parent = <&ipic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8377erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; - mcu_pio: mcu@a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8377erdb", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; }; @@ -197,64 +245,76 @@ interrupt-parent = <&ipic>; interrupts = <38 0x8>; phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; fixed-link = <1 1 1000 0 0>; tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -287,6 +347,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; }; sata@18000 { @@ -294,6 +355,7 @@ reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; }; sata@19000 { @@ -301,6 +363,7 @@ reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; }; /* IPIC @@ -316,6 +379,13 @@ #interrupt-cells = <2>; reg = <0x700 0x100>; }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; }; pci0: pci@e0008500 { @@ -341,6 +411,7 @@ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; @@ -350,4 +421,68 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index b85fc02682d2..651ff2f9db2d 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -23,6 +23,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -127,21 +129,38 @@ reg = <0x200 0x100>; }; - i2c@3000 { + sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; + }; - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - interrupts = <19 0x8>; + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; }; @@ -213,70 +232,83 @@ interrupts = <38 0x8>; dr_mode = "host"; phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -309,14 +341,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; + sleep = <&pmc 0x03000000>; }; /* IPIC @@ -332,6 +357,13 @@ #interrupt-cells = <2>; reg = <0x700 0x100>; }; + + pmc: power@b00 { + compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; }; pci0: pci@e0008500 { @@ -387,6 +419,7 @@ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; clock-frequency = <0>; + sleep = <&pmc 0x00010000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -395,4 +428,68 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 23c10ce22c2c..5d90e85704c3 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -22,6 +22,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -107,26 +109,72 @@ reg = <0x200 0x100>; }; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; interrupt-parent = <&ipic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8378erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; - mcu_pio: mcu@a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8378erdb", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; }; @@ -197,62 +245,76 @@ interrupt-parent = <&ipic>; interrupts = <38 0x8>; phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -285,6 +347,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; }; /* IPIC @@ -300,6 +363,13 @@ #interrupt-cells = <2>; reg = <0x700 0x100>; }; + + pmc: power@b00 { + compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; }; pci0: pci@e0008500 { @@ -325,6 +395,7 @@ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; @@ -334,4 +405,68 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index acf06c438dbf..d6f208b8297a 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -127,21 +127,38 @@ reg = <0x200 0x100>; }; - i2c@3000 { + sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; + }; - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - interrupts = <19 0x8>; + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; }; @@ -213,69 +230,83 @@ interrupts = <38 0x8>; dr_mode = "host"; phy_type = "ulpi"; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + sleep = <&pmc 0x00c00000>; }; enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -308,14 +339,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; + sleep = <&pmc 0x03000000>; }; sata@18000 { @@ -323,6 +347,7 @@ reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; }; sata@19000 { @@ -330,6 +355,7 @@ reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; }; sata@1a000 { @@ -337,6 +363,7 @@ reg = <0x1a000 0x1000>; interrupts = <46 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x0000000c>; }; sata@1b000 { @@ -344,6 +371,7 @@ reg = <0x1b000 0x1000>; interrupts = <47 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000003>; }; /* IPIC @@ -359,6 +387,13 @@ #interrupt-cells = <2>; reg = <0x700 0x100>; }; + + pmc: power@b00 { + compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; }; pci0: pci@e0008500 { @@ -413,6 +448,7 @@ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; clock-frequency = <0>; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 72cdc3c4c7e3..98ae95bd18f4 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -107,26 +107,72 @@ reg = <0x200 0x100>; }; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; interrupt-parent = <&ipic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8379erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; - mcu_pio: mcu@a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8379erdb", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; }; @@ -197,63 +243,76 @@ interrupt-parent = <&ipic>; interrupts = <38 0x8>; phy_type = "ulpi"; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + sleep = <&pmc 0x00c00000>; }; enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; fixed-link = <1 1 1000 0 0>; tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -286,6 +345,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; }; sata@18000 { @@ -293,6 +353,7 @@ reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; }; sata@19000 { @@ -300,6 +361,7 @@ reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; }; sata@1a000 { @@ -307,6 +369,7 @@ reg = <0x1a000 0x1000>; interrupts = <46 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x0000000c>; }; sata@1b000 { @@ -314,6 +377,7 @@ reg = <0x1b000 0x1000>; interrupts = <47 0x8>; interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000003>; }; /* IPIC @@ -329,6 +393,13 @@ #interrupt-cells = <2>; reg = <0x700 0x100>; }; + + pmc: power@b00 { + compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; }; pci0: pci@e0008500 { @@ -354,6 +425,7 @@ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 3c905df1812c..b31c5041350b 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -137,42 +137,6 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - usb@22000 { compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; reg = <0x22000 0x1000>; @@ -194,31 +158,73 @@ }; enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 0x1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 0x1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; usb@2b000 { diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 79570ffe41b9..ddd67be10b03 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -126,97 +126,106 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "FEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <41 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 221036a8ce23..e45097f44fbd 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -126,66 +126,72 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 0668d1048779..7c6932be0197 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -98,44 +98,6 @@ dfsrr; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - dma@21300 { #address-cells = <1>; #size-cells = <1>; @@ -178,31 +140,74 @@ }; enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; tbi-handle = <&tbi0>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; tbi-handle = <&tbi1>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index df774a7088ff..804e90353293 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -142,129 +142,141 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; /* eTSEC 3/4 are currently broken enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; */ diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 053b01e1c93b..9484f0729b10 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -126,66 +126,72 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 11b1bcbe14ce..cc2acf87d02f 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -115,78 +115,84 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; mpic: pic@40000 { diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 1955bd9e113d..9d52e3b25047 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -149,78 +149,84 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@7 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; - reg = <0x7>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@7 { + interrupt-parent = <&mpic>; + interrupts = <1 1>; + reg = <0x7>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 359c3b727420..6e79a4169088 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -1,7 +1,7 @@ /* * MPC8572 DS Device Tree Source * - * Copyright 2007, 2008 Freescale Semiconductor Inc. + * Copyright 2007-2009 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -312,129 +312,141 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -643,7 +655,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -654,7 +666,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; @@ -744,7 +756,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; }; }; @@ -781,7 +793,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts new file mode 100644 index 000000000000..dbd81a764742 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts @@ -0,0 +1,799 @@ +/* + * MPC8572 DS Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@fffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0xf 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000 + 0x4 0x0 0xf 0xffa40000 0x00040000 + 0x5 0x0 0xf 0xffa80000 0x00040000 + 0x6 0x0 0xf 0xffac0000 0x00040000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + nand@4,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + }; + + soc8572@fffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xf 0xffe00000 0x100000>; + reg = <0xf 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + bus-frequency = <0>; // Filled out by uboot. + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pcie@fffe08000 { + cell-index = <0>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe08000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 + + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + + >; + + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; + + }; + + pci1: pcie@fffe09000 { + cell-index = <1>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@fffe0a000 { + cell-index = <2>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts index fd462efa9e61..2bc0c7189653 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -6,7 +6,7 @@ * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0, * eth1, crypto, pci0, pci1. * - * Copyright 2007, 2008 Freescale Semiconductor Inc. + * Copyright 2007-2009 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -148,35 +148,38 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1>; + }; + }; }; enet1: ethernet@25000 { @@ -227,7 +230,7 @@ device_type = "open-pic"; protected-sources = < 31 32 33 37 38 39 /* enet2 enet3 */ - 76 77 78 79 27 42 /* dma2 pci2 serial*/ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ 0xe0 0xe1 0xe2 0xe3 /* msi */ 0xe4 0xe5 0xe6 0xe7 >; @@ -376,7 +379,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -387,7 +390,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; @@ -477,7 +480,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts index e35230f2ac93..159cb3a875f0 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -7,7 +7,7 @@ * * Please note to add "-b 1" for core1's dts compiling. * - * Copyright 2007, 2008 Freescale Semiconductor Inc. + * Copyright 2007-2009 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -186,7 +186,7 @@ protected-sources = < 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ 29 30 34 35 36 40 /* enet0 enet1 */ - 24 26 20 21 22 23 /* pcie0 pcie1 dma1 */ + 24 25 20 21 22 23 /* pci0 pci1 dma1 */ 43 /* i2c */ 0x1 0x2 0x3 0x4 /* pci slot */ 0x9 0xa 0xb 0xc /* usb */ @@ -228,7 +228,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x100000>; + 0x0 0x10000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index f724d72c7b92..1bd3ebe11437 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -217,6 +217,7 @@ codec-handle = <&cs4270>; fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <8>; }; ssi@16100 { @@ -225,6 +226,7 @@ reg = <0x16100 0x100>; interrupt-parent = <&mpic>; interrupts = <63 2>; + fsl,fifo-depth = <8>; }; dma@21300 { diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 4481532cbe77..d72beb192460 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -180,133 +180,144 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index be2c11ca0594..895834713894 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -19,6 +19,7 @@ compatible = "phytec,pcm030"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -29,26 +30,26 @@ reg = <0>; d-cache-line-size = <32>; i-cache-line-size = <32>; - d-cache-size = <0x4000>; /* L1, 16K */ - i-cache-size = <0x4000>; /* L1, 16K */ - timebase-frequency = <0>; /* From Bootloader */ - bus-frequency = <0>; /* From Bootloader */ - clock-frequency = <0>; /* From Bootloader */ + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; - reg = <0x00000000 0x04000000>; /* 64MB */ + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0x0 0xf0000000 0x0000c000>; - bus-frequency = <0>; /* From bootloader */ - system-frequency = <0>; /* From bootloader */ + ranges = <0 0xf0000000 0x0000c000>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; @@ -56,87 +57,70 @@ }; mpc5200_pic: interrupt-controller@500 { - /* 5200 interrupts are encoded into two levels; */ + // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; - timer@600 { /* General Purpose Timer */ + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; - interrupts = <0x1 0x9 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { /* General Purpose Timer */ + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; - interrupts = <0x1 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 10 0>; }; - gpt2: timer@620 { /* General Purpose Timer in GPIO mode */ + gpt2: timer@620 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <2>; reg = <0x620 0x10>; - interrupts = <0x1 0xb 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; - gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + gpt3: timer@630 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <3>; reg = <0x630 0x10>; - interrupts = <0x1 0xc 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; - gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + gpt4: timer@640 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <4>; reg = <0x640 0x10>; - interrupts = <0x1 0xd 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; - gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + gpt5: timer@650 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <5>; reg = <0x650 0x10>; - interrupts = <0x1 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; - gpt6: timer@660 { /* General Purpose Timer in GPIO mode */ + gpt6: timer@660 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <6>; reg = <0x660 0x10>; - interrupts = <0x1 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; - gpt7: timer@670 { /* General Purpose Timer in GPIO mode */ + gpt7: timer@670 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <7>; reg = <0x670 0x10>; - interrupts = <0x1 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 16 0>; gpio-controller; #gpio-cells = <2>; }; @@ -144,40 +128,33 @@ rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; - interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 5 0 1 6 0>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; - interrupts = <0x2 0x11 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 17 0>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; - interrupts = <0x2 0x12 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 18 0>; reg = <0x980 0x80>; }; gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; - interrupts = <0x1 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 7 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_wkup: gpio-wkup@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; - interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 8 0 0 3 0>; gpio-controller; #gpio-cells = <2>; }; @@ -185,26 +162,22 @@ spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; - interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 13 0 2 14 0>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; - interrupts = <0x2 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 6 0>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; - interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0 - 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0 - 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0 - 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; }; xlb@1f00 { @@ -213,24 +186,19 @@ }; ac97@2000 { /* PSC1 in ac97 mode */ - device_type = "sound"; compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; reg = <0x2000 0x100>; - interrupts = <0x2 0x2 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ serial@2400 { /* PSC3 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; cell-index = <2>; reg = <0x2400 0x100>; - interrupts = <0x2 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 3 0>; }; /* PSC4 is ??? */ @@ -238,55 +206,44 @@ /* PSC5 is ??? */ serial@2c00 { /* PSC6 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <1>; cell-index = <5>; reg = <0x2c00 0x100>; - interrupts = <0x2 0x4 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 4 0>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; - local-mac-address = [00 00 00 00 00 00]; - interrupts = <0x2 0x5 0x0>; - interrupt-parent = <&mpc5200_pic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */ - interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */ - interrupt-parent = <&mpc5200_pic>; - - phy0:ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0x0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; - interrupts = <0x2 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 7 0>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; - interrupts = <0x2 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 15 0>; fsl5200-clocking; }; @@ -294,10 +251,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; - interrupts = <0x2 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 16 0>; fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; @@ -307,7 +262,7 @@ }; sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; @@ -340,22 +295,21 @@ device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <0xf0000d00 0x100>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */ - 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 - 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 - 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 - - 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */ - 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 - 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 - 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 8 0 2 9 0 2 10 0>; bus-range = <0 0>; - ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts new file mode 100644 index 000000000000..030042678392 --- /dev/null +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -0,0 +1,392 @@ +/* + * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source + * + * Copyright (C) 2006-2009 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * Juergen Beisert <j.beisert@pengutronix.de> + * Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "phytec,pcm032"; + compatible = "phytec,pcm032"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt6: timer@660 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt7: timer@670 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + ac97@2000 { /* PSC1 is ac97 */ + compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + cell-index = <0>; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + /* PSC2 port is used by CAN1/2 */ + + serial@2400 { /* PSC3 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <2>; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + /* PSC4 is ??? */ + + /* PSC5 is ??? */ + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <5>; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + fsl5200-clocking; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl5200-clocking; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c32"; + reg = <0x52>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0xfc000000 0x02000000 + 2 0 0xfbe00000 0x00200000 + 3 0 0xf9e00000 0x02000000 + 4 0 0xf7e00000 0x02000000 + 5 0 0xe6000000 0x02000000 + 6 0 0xe8000000 0x02000000 + 7 0 0xea000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "ubootl"; + reg = <0x00000000 0x00040000>; + }; + partition@40000 { + label = "kernel"; + reg = <0x00040000 0x001c0000>; + }; + partition@200000 { + label = "jffs2"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "uboot"; + reg = <0x01f00000 0x00040000>; + }; + partition@1f40000 { + label = "env"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "oftree"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "space"; + reg = <0x01fc0000 0x00040000>; + }; + }; + + sram@2,0 { + compatible = "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + + /* + * example snippets for FPGA + * + * fpga@3,0 { + * compatible = "fpga_driver"; + * reg = <3 0 0x02000000>; + * bank-width = <4>; + * }; + * + * fpga@4,0 { + * compatible = "fpga_driver"; + * reg = <4 0 0x02000000>; + * bank-width = <4>; + * }; + */ + + /* + * example snippets for free chipselects + * + * device@5,0 { + * compatible = "custom_driver"; + * reg = <5 0 0x02000000>; + * }; + * + * device@6,0 { + * compatible = "custom_driver"; + * reg = <6 0 0x02000000>; + * }; + * + * device@7,0 { + * compatible = "custom_driver"; + * reg = <7 0 0x02000000>; + * }; + */ + }; +}; + diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts new file mode 100644 index 000000000000..ad402c488741 --- /dev/null +++ b/arch/powerpc/boot/dts/redwood.dts @@ -0,0 +1,244 @@ +/* + * Device Tree Source for AMCC Redwood(460SX) + * + * Copyright 2008 AMCC <tmarri@amcc.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,redwood"; + compatible = "amcc,redwood"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x0000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + }; + + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 8d365a57ebc1..a36dbbc48694 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -159,68 +159,76 @@ phy_type = "ulpi"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@19 { - interrupt-parent = <&ipic>; - interrupts = <20 0x8>; - reg = <0x19>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1a { - interrupt-parent = <&ipic>; - interrupts = <21 0x8>; - reg = <0x1a>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1a { + interrupt-parent = <&ipic>; + interrupts = <21 0x8>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 2baf4a51f224..9c5079fec4f2 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -234,66 +234,72 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@19 { - interrupt-parent = <&mpic>; - interrupts = <0x6 0x1>; - reg = <0x19>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1a { - interrupt-parent = <&mpic>; - interrupts = <0x7 0x1>; - reg = <0x1a>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index 01542f7062ab..b772405a9a0a 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -139,77 +139,83 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy0: ethernet-phy@19 { - interrupt-parent = <&mpic>; - interrupts = <0x6 0x1>; - reg = <0x19>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1a { - interrupt-parent = <&mpic>; - interrupts = <0x7 0x1>; - reg = <0x1a>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@1b { - interrupt-parent = <&mpic>; - interrupts = <0x8 0x1>; - reg = <0x1b>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@1c { - interrupt-parent = <&mpic>; - interrupts = <0x8 0x1>; - reg = <0x1c>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1b { + interrupt-parent = <&mpic>; + interrupts = <0x8 0x1>; + reg = <0x1b>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@1c { + interrupt-parent = <&mpic>; + interrupts = <0x8 0x1>; + reg = <0x1c>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; mpic: pic@40000 { diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts index 36db981548e4..e3e914e78caa 100644 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -192,132 +192,144 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@1f { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1f>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1f { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1f>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts new file mode 100644 index 000000000000..b8d0fc6f0042 --- /dev/null +++ b/arch/powerpc/boot/dts/socrates.dts @@ -0,0 +1,338 @@ +/* + * Device Tree Source for the Socrates board (MPC8544). + * + * Copyright (c) 2008 Emcraft Systems. + * Sergei Poselenov, <sposelenov@emcraft.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "abb,socrates"; + compatible = "abb,socrates"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc8544@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00001000>; // CCSRBAR 1M + bus-frequency = <0>; // Filled in by U-Boot + compatible = "fsl,mpc8544-immr", "simple-bus"; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@28 { + compatible = "winbond,w83782d"; + reg = <0x28>; + }; + rtc@32 { + compatible = "epson,rx8025"; + reg = <0x32>; + interrupts = <7 1>; + interrupt-parent = <&mpic>; + }; + dtt@4c { + compatible = "dallas,ds75"; + reg = <0x4c>; + }; + ts@4a { + compatible = "ti,tsc2003"; + reg = <0x4a>; + interrupt-parent = <&mpic>; + interrupts = <8 1>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <0 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <0 1>; + reg = <1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + + localbus { + compatible = "fsl,mpc8544-localbus", + "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x40>; + + ranges = <0 0 0xfc000000 0x04000000 + 2 0 0xc8000000 0x04000000 + 3 0 0xc0000000 0x00100000 + >; /* Overwritten by U-Boot */ + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x0 0x000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x0 0x1e0000>; + read-only; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x1e0000 0x20000>; + }; + partition@200000 { + label = "root"; + reg = <0x200000 0x200000>; + }; + partition@400000 { + label = "user"; + reg = <0x400000 0x3b80000>; + }; + partition@3f80000 { + label = "env"; + reg = <0x3f80000 0x40000>; + read-only; + }; + partition@3fc0000 { + label = "u-boot"; + reg = <0x3fc0000 0x40000>; + read-only; + }; + }; + + display@2,0 { + compatible = "fujitsu,lime"; + reg = <2 0x0 0x4000000>; + interrupt-parent = <&mpic>; + interrupts = <6 1>; + }; + + fpga_pic: fpga-pic@3,10 { + compatible = "abb,socrates-fpga-pic"; + reg = <3 0x10 0x10>; + interrupt-controller; + /* IRQs 2, 10, 11, active low, level-sensitive */ + interrupts = <2 1 10 1 11 1>; + interrupt-parent = <&mpic>; + #interrupt-cells = <3>; + }; + + spi@3,60 { + compatible = "abb,socrates-spi"; + reg = <3 0x60 0x10>; + interrupts = <8 4 0>; // number, type, routing + interrupt-parent = <&fpga_pic>; + }; + + nand@3,70 { + compatible = "abb,socrates-nand"; + reg = <3 0x70 0x04>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + data@0 { + label = "data"; + reg = <0x0 0x40000000>; + }; + }; + + can@3,100 { + compatible = "philips,sja1000"; + reg = <3 0x100 0x80>; + interrupts = <2 8 1>; // number, type, routing + interrupt-parent = <&fpga_pic>; + }; + }; + + pci0: pci@e0008000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 1 &mpic 5 1 + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 1 &mpic 4 1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts index fff33fe6efc6..8b173957fb5f 100644 --- a/arch/powerpc/boot/dts/stx_gp3_8560.dts +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -124,66 +124,72 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <5 4>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy4: ethernet-phy@4 { - interrupt-parent = <&mpic>; - interrupts = <5 4>; - reg = <4>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <4>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; mpic: pic@40000 { diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index 906302e26a62..c9590b58b7b0 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -17,6 +17,7 @@ compatible = "tqc,tqm5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,36 +67,33 @@ compatible = "fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; can@900 { compatible = "fsl,mpc5200-mscan"; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -105,7 +103,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -114,39 +111,28 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <1>; // Logical port assignment reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <2>; // Logical port assignment reg = <0x2400 0x100>; interrupts = <2 3 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -156,10 +142,8 @@ compatible = "fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; @@ -168,7 +152,6 @@ compatible = "fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { @@ -177,7 +160,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { @@ -192,9 +174,8 @@ }; }; - lpb { - model = "fsl,lpb"; - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x02000000>; @@ -223,7 +204,6 @@ 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 0x02000000 0 0x90000000 0x90000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index a693f01c21aa..ac9413a29f9f 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -84,6 +84,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -131,94 +136,103 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "FEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <41 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index 9e3f5f0dde20..c71bb5dd5e5e 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -83,6 +83,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -130,72 +135,78 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 15086eb65c50..28b1a95257cd 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -143,134 +148,146 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy1: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - phy4: ethernet-phy@4 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <4>; - device_type = "ethernet-phy"; - }; - phy5: ethernet-phy@5 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <5>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <4>; + device_type = "ethernet-phy"; + }; + phy5: ethernet-phy@5 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <5>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -365,14 +382,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index b7b65f5e79b6..826fb622cd3c 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -143,134 +148,146 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy1: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - phy4: ethernet-phy@4 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <4>; - device_type = "ethernet-phy"; - }; - phy5: ethernet-phy@5 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <5>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <4>; + device_type = "ethernet-phy"; + }; + phy5: ethernet-phy@5 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <5>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { @@ -365,14 +382,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index cf92b4e7945e..a133ded6dddb 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -83,6 +83,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -130,72 +135,78 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 9e1ab2d2f669..649e2e576267 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -132,72 +137,78 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <8 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; mpic: pic@40000 { @@ -335,14 +346,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts index dc8e78e2dceb..52d8c1ad26a1 100644 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ b/arch/powerpc/boot/dts/virtex440-ml507.dts @@ -7,6 +7,15 @@ * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. + * + * --- + * + * Device Tree Generator version: 1.1 + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 + * + * XPS project directory: ml507_ppc440_emb_ref */ /dts-v1/; @@ -22,8 +31,8 @@ reg = < 0 0x10000000 >; } ; chosen { - bootargs = "console=ttyS0 ip=on root=/dev/ram"; - linux,stdout-path = "/plb@0/serial@83e00000"; + bootargs = "console=ttyS0 root=/dev/ram"; + linux,stdout-path = &RS232_Uart_1; } ; cpus { #address-cells = <1>; @@ -136,19 +145,19 @@ compatible = "xlnx,ll-dma-1.00.a"; dcr-reg = < 0x80 0x11 >; interrupt-parent = <&xps_intc_0>; - interrupts = < 9 2 0xa 2 >; + interrupts = < 10 2 11 2 >; } ; } ; } ; plb_v46_0: plb@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,plb-v46-1.02.a", "simple-bus"; + compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; ranges ; DIP_Switches_8Bit: gpio@81460000 { compatible = "xlnx,xps-gpio-1.00.a"; interrupt-parent = <&xps_intc_0>; - interrupts = < 6 2 >; + interrupts = < 7 2 >; reg = < 0x81460000 0x10000 >; xlnx,all-inputs = <1>; xlnx,all-inputs-2 = <0>; @@ -163,6 +172,86 @@ xlnx,tri-default = <0xffffffff>; xlnx,tri-default-2 = <0xffffffff>; } ; + FLASH: flash@fc000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xfc000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x2710>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x2>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x2af8>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; Hard_Ethernet_MAC: xps-ll-temac@81c00000 { #address-cells = <1>; #size-cells = <1>; @@ -185,6 +274,19 @@ xlnx,txfifo = <0x1000>; } ; } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x5f5e100>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + } ; LEDs_8Bit: gpio@81400000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = < 0x81400000 0x10000 >; @@ -220,7 +322,7 @@ Push_Buttons_5Bit: gpio@81440000 { compatible = "xlnx,xps-gpio-1.00.a"; interrupt-parent = <&xps_intc_0>; - interrupts = < 7 2 >; + interrupts = < 8 2 >; reg = < 0x81440000 0x10000 >; xlnx,all-inputs = <1>; xlnx,all-inputs-2 = <0>; @@ -237,13 +339,13 @@ } ; RS232_Uart_1: serial@83e00000 { clock-frequency = <100000000>; - compatible = "xlnx,xps-uart16550-2.00.a", "ns16550"; - current-speed = <0x2580>; + compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; + current-speed = <9600>; device_type = "serial"; interrupt-parent = <&xps_intc_0>; - interrupts = < 8 2 >; + interrupts = < 9 2 >; reg = < 0x83e00000 0x10000 >; - reg-offset = <3>; + reg-offset = <0x1003>; reg-shift = <2>; xlnx,family = "virtex5"; xlnx,has-external-rclk = <0>; @@ -268,7 +370,7 @@ compatible = "xlnx,xps-intc-1.00.a"; interrupt-controller ; reg = < 0x81800000 0x10000 >; - xlnx,num-intr-inputs = <0xb>; + xlnx,num-intr-inputs = <0xc>; } ; xps_timebase_wdt_1: xps-timebase-wdt@83a00000 { compatible = "xlnx,xps-timebase-wdt-1.00.b"; |