diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 591 |
1 files changed, 465 insertions, 126 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 10b658ad65e1..a8a5361fb70c 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -19,12 +19,76 @@ /* * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code - * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support common interrupt prologs - * 0x6000 - 0x6fff : Initial (CPU0) segment table + * 0x0100 - 0x17ff : pSeries Interrupt prologs + * 0x1800 - 0x4000 : interrupt support common interrupt prologs + * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1 + * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1 * 0x7000 - 0x7fff : FWNMI data area - * 0x8000 - : Early init and support code + * 0x8000 - 0x8fff : Initial (CPU0) segment table + * 0x9000 - : Early init and support code */ + /* Syscall routine is used twice, in reloc-off and reloc-on paths */ +#define SYSCALL_PSERIES_1 \ +BEGIN_FTR_SECTION \ + cmpdi r0,0x1ebe ; \ + beq- 1f ; \ +END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ + mr r9,r13 ; \ + GET_PACA(r13) ; \ + mfspr r11,SPRN_SRR0 ; \ +0: + +#define SYSCALL_PSERIES_2_RFID \ + mfspr r12,SPRN_SRR1 ; \ + ld r10,PACAKBASE(r13) ; \ + LOAD_HANDLER(r10, system_call_entry) ; \ + mtspr SPRN_SRR0,r10 ; \ + ld r10,PACAKMSR(r13) ; \ + mtspr SPRN_SRR1,r10 ; \ + rfid ; \ + b . ; /* prevent speculative execution */ + +#define SYSCALL_PSERIES_3 \ + /* Fast LE/BE switch system call */ \ +1: mfspr r12,SPRN_SRR1 ; \ + xori r12,r12,MSR_LE ; \ + mtspr SPRN_SRR1,r12 ; \ + rfid ; /* return to userspace */ \ + b . ; \ +2: mfspr r12,SPRN_SRR1 ; \ + andi. r12,r12,MSR_PR ; \ + bne 0b ; \ + mtspr SPRN_SRR0,r3 ; \ + mtspr SPRN_SRR1,r4 ; \ + mtspr SPRN_SDR1,r5 ; \ + rfid ; \ + b . ; /* prevent speculative execution */ + +#if defined(CONFIG_RELOCATABLE) + /* + * We can't branch directly; in the direct case we use LR + * and system_call_entry restores LR. (We thus need to move + * LR to r10 in the RFID case too.) + */ +#define SYSCALL_PSERIES_2_DIRECT \ + mflr r10 ; \ + ld r12,PACAKBASE(r13) ; \ + LOAD_HANDLER(r12, system_call_entry_direct) ; \ + mtlr r12 ; \ + mfspr r12,SPRN_SRR1 ; \ + /* Re-use of r13... No spare regs to do this */ \ + li r13,MSR_RI ; \ + mtmsrd r13,1 ; \ + GET_PACA(r13) ; /* get r13 back */ \ + blr ; +#else + /* We can branch directly */ +#define SYSCALL_PSERIES_2_DIRECT \ + mfspr r12,SPRN_SRR1 ; \ + li r10,MSR_RI ; \ + mtmsrd r10,1 ; /* Set RI (EE=0) */ \ + b system_call_entry_direct ; +#endif /* * This is the start of the interrupt handlers for pSeries @@ -40,7 +104,7 @@ __start_interrupts: .globl system_reset_pSeries; system_reset_pSeries: - HMT_MEDIUM; + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) #ifdef CONFIG_PPC_P7_NAP BEGIN_FTR_SECTION @@ -89,12 +153,15 @@ machine_check_pSeries_1: * some code path might still want to branch into the original * vector */ - b machine_check_pSeries + HMT_MEDIUM_PPR_DISCARD + SET_SCRATCH0(r13) /* save r13 */ + EXCEPTION_PROLOG_0(PACA_EXMC) + b machine_check_pSeries_0 . = 0x300 .globl data_access_pSeries data_access_pSeries: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) BEGIN_FTR_SECTION b data_access_check_stab @@ -106,8 +173,9 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) . = 0x380 .globl data_access_slb_pSeries data_access_slb_pSeries: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR @@ -137,8 +205,9 @@ data_access_slb_pSeries: . = 0x480 .globl instruction_access_slb_pSeries instruction_access_slb_pSeries: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ @@ -188,7 +257,7 @@ hardware_interrupt_hv: MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) - STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) + MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b) @@ -207,31 +276,11 @@ system_call_pSeries: KVMTEST(0xc00) GET_SCRATCH0(r13) #endif -BEGIN_FTR_SECTION - cmpdi r0,0x1ebe - beq- 1f -END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) - mr r9,r13 - GET_PACA(r13) - mfspr r11,SPRN_SRR0 - mfspr r12,SPRN_SRR1 - ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, system_call_entry) - mtspr SPRN_SRR0,r10 - ld r10,PACAKMSR(r13) - mtspr SPRN_SRR1,r10 - rfid - b . /* prevent speculative execution */ - + SYSCALL_PSERIES_1 + SYSCALL_PSERIES_2_RFID + SYSCALL_PSERIES_3 KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00) -/* Fast LE/BE switch system call */ -1: mfspr r12,SPRN_SRR1 - xori r12,r12,MSR_LE - mtspr SPRN_SRR1,r12 - rfid /* return to userspace */ - b . - STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xd00) @@ -240,16 +289,30 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) */ . = 0xe00 hv_exception_trampoline: + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b h_data_storage_hv + . = 0xe20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b h_instr_storage_hv + . = 0xe40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b emulation_assist_hv - . = 0xe50 - b hmi_exception_hv + . = 0xe60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b hmi_exception_hv + . = 0xe80 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b h_doorbell_hv + /* We need to deal with the Altivec unavailable exception * here which is at 0xf20, thus in the middle of the * prolog code of the PerformanceMonitor one. A little @@ -257,16 +320,27 @@ hv_exception_trampoline: */ performance_monitor_pSeries_1: . = 0xf00 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b performance_monitor_pSeries altivec_unavailable_pSeries_1: . = 0xf20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b altivec_unavailable_pSeries vsx_unavailable_pSeries_1: . = 0xf40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b vsx_unavailable_pSeries + . = 0xf60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b tm_unavailable_pSeries + #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202) @@ -276,13 +350,11 @@ vsx_unavailable_pSeries_1: KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300) . = 0x1500 - .global denorm_Hypervisor + .global denorm_exception_hv denorm_exception_hv: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD mtspr SPRN_SPRG_HSCRATCH0,r13 - mfspr r13,SPRN_SPRG_HPACA - std r9,PACA_EXGEN+EX_R9(r13) - std r10,PACA_EXGEN+EX_R10(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) mfspr r9,SPRN_SPRG_HSCRATCH0 @@ -311,20 +383,24 @@ denorm_exception_hv: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802) +#else + . = 0x1800 #endif /* CONFIG_CBE_RAS */ - . = 0x3000 /*** Out of line interrupts support ***/ + .align 7 /* moved from 0x200 */ machine_check_pSeries: .globl machine_check_fwnmi machine_check_fwnmi: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, - EXC_STD, KVMTEST, 0x200) + EXCEPTION_PROLOG_0(PACA_EXMC) +machine_check_pSeries_0: + EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200) + EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD) KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200) /* moved from 0x300 */ @@ -450,6 +526,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) + RESTORE_PPR_PACA(PACA_EXGEN, r10) ld r10,PACA_EXGEN+EX_R10(r13) ld r11,PACA_EXGEN+EX_R11(r13) ld r12,PACA_EXGEN+EX_R12(r13) @@ -460,28 +537,34 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) .align 7 /* moved from 0xe00 */ - STD_EXCEPTION_HV(., 0xe02, h_data_storage) + STD_EXCEPTION_HV_OOL(0xe02, h_data_storage) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0xe02) - STD_EXCEPTION_HV(., 0xe22, h_instr_storage) + STD_EXCEPTION_HV_OOL(0xe22, h_instr_storage) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22) - STD_EXCEPTION_HV(., 0xe42, emulation_assist) + STD_EXCEPTION_HV_OOL(0xe42, emulation_assist) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42) - STD_EXCEPTION_HV(., 0xe62, hmi_exception) /* need to flush cache ? */ + STD_EXCEPTION_HV_OOL(0xe62, hmi_exception) /* need to flush cache ? */ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62) + MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82) /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., 0xf00, performance_monitor) + STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf00) - STD_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable) + STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf20) - STD_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable) + STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40) + STD_EXCEPTION_PSERIES_OOL(0xf60, tm_unavailable) + KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf60) /* - * An interrupt came in while soft-disabled. We set paca->irq_happened, - * then, if it was a decrementer interrupt, we bump the dec to max and - * and return, else we hard disable and return. This is called with - * r10 containing the value to OR to the paca field. + * An interrupt came in while soft-disabled. We set paca->irq_happened, then: + * - If it was a decrementer interrupt, we bump the dec to max and and return. + * - If it was a doorbell we return immediately since doorbells are edge + * triggered and won't automatically refire. + * - else we hard disable and return. + * This is called with r10 containing the value to OR to the paca field. */ #define MASKED_INTERRUPT(_H) \ masked_##_H##interrupt: \ @@ -489,13 +572,15 @@ masked_##_H##interrupt: \ lbz r11,PACAIRQHAPPENED(r13); \ or r11,r11,r10; \ stb r11,PACAIRQHAPPENED(r13); \ - andi. r10,r10,PACA_IRQ_DEC; \ - beq 1f; \ + cmpwi r10,PACA_IRQ_DEC; \ + bne 1f; \ lis r10,0x7fff; \ ori r10,r10,0xffff; \ mtspr SPRN_DEC,r10; \ b 2f; \ -1: mfspr r10,SPRN_##_H##SRR1; \ +1: cmpwi r10,PACA_IRQ_DBELL; \ + beq 2f; \ + mfspr r10,SPRN_##_H##SRR1; \ rldicl r10,r10,48,1; /* clear MSR_EE */ \ rotldi r10,r10,16; \ mtspr SPRN_##_H##SRR1,r10; \ @@ -512,8 +597,8 @@ masked_##_H##interrupt: \ /* * Called from arch_local_irq_enable when an interrupt needs - * to be resent. r3 contains 0x500 or 0x900 to indicate which - * kind of interrupt. MSR:EE is already off. We generate a + * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate + * which kind of interrupt. MSR:EE is already off. We generate a * stackframe like if a real interrupt had happened. * * Note: While MSR:EE is off, we need to make sure that _MSR @@ -529,9 +614,18 @@ _GLOBAL(__replay_interrupt) mflr r11 mfcr r9 ori r12,r12,MSR_EE - andi. r3,r3,0x0800 - bne decrementer_common - b hardware_interrupt_common + cmpwi r3,0x900 + beq decrementer_common + cmpwi r3,0x500 + beq hardware_interrupt_common +BEGIN_FTR_SECTION + cmpwi r3,0xe80 + beq h_doorbell_common +FTR_SECTION_ELSE + cmpwi r3,0xa00 + beq doorbell_super_common +ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) + blr #ifdef CONFIG_PPC_PSERIES /* @@ -540,7 +634,7 @@ _GLOBAL(__replay_interrupt) .globl system_reset_fwnmi .align 7 system_reset_fwnmi: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD, NOTEST, 0x100) @@ -575,16 +669,12 @@ slb_miss_user_pseries: b . /* prevent spec. execution */ #endif /* __DISABLED__ */ - .align 7 - .globl __end_interrupts -__end_interrupts: - /* * Code from here down to __end_handlers is invoked from the * exception prologs above. Because the prologs assemble the * addresses of these handlers using the LOAD_HANDLER macro, - * which uses an addi instruction, these handlers must be in - * the first 32k of the kernel image. + * which uses an ori instruction, these handlers must be in + * the first 64k of the kernel image. */ /*** Common interrupt handlers ***/ @@ -609,12 +699,21 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) - STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) +#ifdef CONFIG_PPC_DOORBELL + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception) +#else + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception) +#endif STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) - STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) + STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) + STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) +#ifdef CONFIG_PPC_DOORBELL + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception) +#else + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception) +#endif STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception) STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception) @@ -629,7 +728,167 @@ machine_check_common: STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception) #endif /* CONFIG_CBE_RAS */ + /* + * Relocation-on interrupts: A subset of the interrupts can be delivered + * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering + * it. Addresses are the same as the original interrupt addresses, but + * offset by 0xc000000000004000. + * It's impossible to receive interrupts below 0x300 via this mechanism. + * KVM: None of these traps are from the guest ; anything that escalated + * to HV=1 from HV=0 is delivered via real mode handlers. + */ + + /* + * This uses the standard macro, since the original 0x300 vector + * only has extra guff for STAB-based processors -- which never + * come here. + */ + STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access) + . = 0x4380 + .globl data_access_slb_relon_pSeries +data_access_slb_relon_pSeries: + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) + EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380) + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_DAR + mfspr r12,SPRN_SRR1 +#ifndef CONFIG_RELOCATABLE + b .slb_miss_realmode +#else + /* + * We can't just use a direct branch to .slb_miss_realmode + * because the distance from here to there depends on where + * the kernel ends up being put. + */ + mfctr r11 + ld r10,PACAKBASE(r13) + LOAD_HANDLER(r10, .slb_miss_realmode) + mtctr r10 + bctr +#endif + + STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access) + . = 0x4480 + .globl instruction_access_slb_relon_pSeries +instruction_access_slb_relon_pSeries: + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) + EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480) + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ + mfspr r12,SPRN_SRR1 +#ifndef CONFIG_RELOCATABLE + b .slb_miss_realmode +#else + mfctr r11 + ld r10,PACAKBASE(r13) + LOAD_HANDLER(r10, .slb_miss_realmode) + mtctr r10 + bctr +#endif + + . = 0x4500 + .globl hardware_interrupt_relon_pSeries; + .globl hardware_interrupt_relon_hv; +hardware_interrupt_relon_pSeries: +hardware_interrupt_relon_hv: + BEGIN_FTR_SECTION + _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV) + FTR_SECTION_ELSE + _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR) + ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_206) + STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment) + STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check) + STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable) + MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer) + STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer) + MASKABLE_RELON_EXCEPTION_PSERIES(0x4a00, 0xa00, doorbell_super) + STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b) + + . = 0x4c00 + .globl system_call_relon_pSeries +system_call_relon_pSeries: + HMT_MEDIUM + SYSCALL_PSERIES_1 + SYSCALL_PSERIES_2_DIRECT + SYSCALL_PSERIES_3 + + STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step) + + . = 0x4e00 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b h_data_storage_relon_hv + + . = 0x4e20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b h_instr_storage_relon_hv + + . = 0x4e40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b emulation_assist_relon_hv + + . = 0x4e60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b hmi_exception_relon_hv + + . = 0x4e80 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b h_doorbell_relon_hv + +performance_monitor_relon_pSeries_1: + . = 0x4f00 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b performance_monitor_relon_pSeries + +altivec_unavailable_relon_pSeries_1: + . = 0x4f20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b altivec_unavailable_relon_pSeries + +vsx_unavailable_relon_pSeries_1: + . = 0x4f40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b vsx_unavailable_relon_pSeries + +tm_unavailable_relon_pSeries_1: + . = 0x4f60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b tm_unavailable_relon_pSeries + + STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint) +#ifdef CONFIG_PPC_DENORMALISATION + . = 0x5500 + b denorm_exception_hv +#endif +#ifdef CONFIG_HVC_SCOM + STD_RELON_EXCEPTION_HV(0x5600, 0x1600, maintence_interrupt) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1600) +#endif /* CONFIG_HVC_SCOM */ + STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist) + + /* Other future vectors */ + .align 7 + .globl __end_interrupts +__end_interrupts: + .align 7 +system_call_entry_direct: +#if defined(CONFIG_RELOCATABLE) + /* The first level prologue may have used LR to get here, saving + * orig in r10. To save hacking/ifdeffing common code, restore here. + */ + mtlr r10 +#endif system_call_entry: b system_call_common @@ -714,21 +973,21 @@ data_access_common: ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ + b .do_hash_page /* Try to handle as hpte fault */ .align 7 - .globl h_data_storage_common + .globl h_data_storage_common h_data_storage_common: - mfspr r10,SPRN_HDAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_HDSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) - bl .save_nvgprs + mfspr r10,SPRN_HDAR + std r10,PACA_EXGEN+EX_DAR(r13) + mfspr r10,SPRN_HDSISR + stw r10,PACA_EXGEN+EX_DSISR(r13) + EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) + bl .save_nvgprs DISABLE_INTS - addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception - b .ret_from_except + addi r3,r1,STACK_FRAME_OVERHEAD + bl .unknown_exception + b .ret_from_except .align 7 .globl instruction_access_common @@ -741,7 +1000,7 @@ instruction_access_common: li r5,0x400 b .do_hash_page /* Try to handle as hpte fault */ - STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception) + STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception) /* * Here is the common SLB miss user that is used when going to virtual @@ -843,6 +1102,7 @@ _GLOBAL(slb_miss_realmode) mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ .machine pop + RESTORE_PPR_PACA(PACA_EXSLB, r9) ld r9,PACA_EXSLB+EX_R9(r13) ld r10,PACA_EXSLB+EX_R10(r13) ld r11,PACA_EXSLB+EX_R11(r13) @@ -916,9 +1176,26 @@ fp_unavailable_common: addi r3,r1,STACK_FRAME_OVERHEAD bl .kernel_fp_unavailable_exception BUG_OPCODE -1: bl .load_up_fpu +1: +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +BEGIN_FTR_SECTION + /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in + * transaction), go do TM stuff + */ + rldicl. r0, r12, (64-MSR_TS_LG), (64-2) + bne- 2f +END_FTR_SECTION_IFSET(CPU_FTR_TM) +#endif + bl .load_up_fpu b fast_exception_return - +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +2: /* User process was in a transaction */ + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .fp_unavailable_tm + b .ret_from_except +#endif .align 7 .globl altivec_unavailable_common altivec_unavailable_common: @@ -926,8 +1203,25 @@ altivec_unavailable_common: #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION beq 1f +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + BEGIN_FTR_SECTION_NESTED(69) + /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in + * transaction), go do TM stuff + */ + rldicl. r0, r12, (64-MSR_TS_LG), (64-2) + bne- 2f + END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) +#endif bl .load_up_altivec b fast_exception_return +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +2: /* User process was in a transaction */ + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .altivec_unavailable_tm + b .ret_from_except +#endif 1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif @@ -944,7 +1238,24 @@ vsx_unavailable_common: #ifdef CONFIG_VSX BEGIN_FTR_SECTION beq 1f +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + BEGIN_FTR_SECTION_NESTED(69) + /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in + * transaction), go do TM stuff + */ + rldicl. r0, r12, (64-MSR_TS_LG), (64-2) + bne- 2f + END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) +#endif b .load_up_vsx +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +2: /* User process was in a transaction */ + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .vsx_unavailable_tm + b .ret_from_except +#endif 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif @@ -955,9 +1266,75 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) b .ret_from_except .align 7 + .globl tm_unavailable_common +tm_unavailable_common: + EXCEPTION_PROLOG_COMMON(0xf60, PACA_EXGEN) + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .tm_unavailable_exception + b .ret_from_except + + .align 7 .globl __end_handlers __end_handlers: + /* Equivalents to the above handlers for relocation-on interrupt vectors */ + STD_RELON_EXCEPTION_HV_OOL(0xe00, h_data_storage) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00) + STD_RELON_EXCEPTION_HV_OOL(0xe20, h_instr_storage) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20) + STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40) + STD_RELON_EXCEPTION_HV_OOL(0xe60, hmi_exception) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60) + MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe80) + + STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, tm_unavailable) + +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: + + /* pseries and powernv need to keep the whole page from + * 0x7000 to 0x8000 free for use by the firmware + */ + . = 0x8000 +#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ + +/* Space for CPU0's segment table */ + .balign 4096 + .globl initial_stab +initial_stab: + .space 4096 + +#ifdef CONFIG_PPC_POWERNV +_GLOBAL(opal_mc_secondary_handler) + HMT_MEDIUM_PPR_DISCARD + SET_SCRATCH0(r13) + GET_PACA(r13) + clrldi r3,r3,2 + tovirt(r3,r3) + std r3,PACA_OPAL_MC_EVT(r13) + ld r13,OPAL_MC_SRR0(r3) + mtspr SPRN_SRR0,r13 + ld r13,OPAL_MC_SRR1(r3) + mtspr SPRN_SRR1,r13 + ld r3,OPAL_MC_GPR3(r3) + GET_SCRATCH0(r13) + b machine_check_pSeries +#endif /* CONFIG_PPC_POWERNV */ + + /* * Hash table stuff */ @@ -1029,7 +1406,7 @@ handle_dabr_fault: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_dabr + bl .do_break 12: b .ret_from_except_lite @@ -1151,41 +1528,3 @@ _GLOBAL(do_stab_bolted) ld r13,PACA_EXSLB+EX_R13(r13) rfid b . /* prevent speculative execution */ - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* pseries and powernv need to keep the whole page from - * 0x7000 to 0x8000 free for use by the firmware - */ - . = 0x8000 -#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ - -/* Space for CPU0's segment table */ - .balign 4096 - .globl initial_stab -initial_stab: - .space 4096 - -#ifdef CONFIG_PPC_POWERNV -_GLOBAL(opal_mc_secondary_handler) - HMT_MEDIUM - SET_SCRATCH0(r13) - GET_PACA(r13) - clrldi r3,r3,2 - tovirt(r3,r3) - std r3,PACA_OPAL_MC_EVT(r13) - ld r13,OPAL_MC_SRR0(r3) - mtspr SPRN_SRR0,r13 - ld r13,OPAL_MC_SRR1(r3) - mtspr SPRN_SRR1,r13 - ld r3,OPAL_MC_GPR3(r3) - GET_SCRATCH0(r13) - b machine_check_pSeries -#endif /* CONFIG_PPC_POWERNV */ |