diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 2058 |
1 files changed, 1387 insertions, 671 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index ffc15f4f079d..728ccb0f560c 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -32,16 +32,10 @@ #define EX_CCR 52 #define EX_CFAR 56 #define EX_PPR 64 -#if defined(CONFIG_RELOCATABLE) #define EX_CTR 72 .if EX_SIZE != 10 .error "EX_SIZE is wrong" .endif -#else -.if EX_SIZE != 9 - .error "EX_SIZE is wrong" -.endif -#endif /* * Following are fixed section helper macros. @@ -50,7 +44,6 @@ * EXC_VIRT_BEGIN/END - virt (AIL), unrelocated exception vectors * TRAMP_REAL_BEGIN - real, unrelocated helpers (virt may call these) * TRAMP_VIRT_BEGIN - virt, unreloc helpers (in practice, real can use) - * TRAMP_KVM_BEGIN - KVM handlers, these are put into real, unrelocated * EXC_COMMON - After switching to virtual, relocated mode. */ @@ -80,13 +73,6 @@ name: #define TRAMP_VIRT_BEGIN(name) \ FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name) -#ifdef CONFIG_KVM_BOOK3S_64_HANDLER -#define TRAMP_KVM_BEGIN(name) \ - TRAMP_VIRT_BEGIN(name) -#else -#define TRAMP_KVM_BEGIN(name) -#endif - #define EXC_REAL_NONE(start, size) \ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start, size); \ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, start, size) @@ -119,67 +105,6 @@ name: ori reg,reg,(ABS_ADDR(label))@l; \ addis reg,reg,(ABS_ADDR(label))@h -/* Exception register prefixes */ -#define EXC_HV_OR_STD 2 /* depends on HVMODE */ -#define EXC_HV 1 -#define EXC_STD 0 - -#if defined(CONFIG_RELOCATABLE) -/* - * If we support interrupts with relocation on AND we're a relocatable kernel, - * we need to use CTR to get to the 2nd level handler. So, save/restore it - * when required. - */ -#define SAVE_CTR(reg, area) mfctr reg ; std reg,area+EX_CTR(r13) -#define GET_CTR(reg, area) ld reg,area+EX_CTR(r13) -#define RESTORE_CTR(reg, area) ld reg,area+EX_CTR(r13) ; mtctr reg -#else -/* ...else CTR is unused and in register. */ -#define SAVE_CTR(reg, area) -#define GET_CTR(reg, area) mfctr reg -#define RESTORE_CTR(reg, area) -#endif - -/* - * PPR save/restore macros used in exceptions-64s.S - * Used for P7 or later processors - */ -#define SAVE_PPR(area, ra) \ -BEGIN_FTR_SECTION_NESTED(940) \ - ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \ - std ra,_PPR(r1); \ -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940) - -#define RESTORE_PPR_PACA(area, ra) \ -BEGIN_FTR_SECTION_NESTED(941) \ - ld ra,area+EX_PPR(r13); \ - mtspr SPRN_PPR,ra; \ -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941) - -/* - * Get an SPR into a register if the CPU has the given feature - */ -#define OPT_GET_SPR(ra, spr, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - mfspr ra,spr; \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - -/* - * Set an SPR from a register if the CPU has the given feature - */ -#define OPT_SET_SPR(ra, spr, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - mtspr spr,ra; \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - -/* - * Save a register to the PACA if the CPU has the given feature - */ -#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - std ra,offset(r13); \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - /* * Branch to label using its 0xC000 address. This results in instruction * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned @@ -193,89 +118,199 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) mtctr reg; \ bctr -.macro INT_KVM_HANDLER name, vec, hsrr, area, skip - TRAMP_KVM_BEGIN(\name\()_kvm) - KVM_HANDLER \vec, \hsrr, \area, \skip +/* + * Interrupt code generation macros + */ +#define IVEC .L_IVEC_\name\() /* Interrupt vector address */ +#define IHSRR .L_IHSRR_\name\() /* Sets SRR or HSRR registers */ +#define IHSRR_IF_HVMODE .L_IHSRR_IF_HVMODE_\name\() /* HSRR if HV else SRR */ +#define IAREA .L_IAREA_\name\() /* PACA save area */ +#define IVIRT .L_IVIRT_\name\() /* Has virt mode entry point */ +#define IISIDE .L_IISIDE_\name\() /* Uses SRR0/1 not DAR/DSISR */ +#define IDAR .L_IDAR_\name\() /* Uses DAR (or SRR0) */ +#define IDSISR .L_IDSISR_\name\() /* Uses DSISR (or SRR1) */ +#define ISET_RI .L_ISET_RI_\name\() /* Run common code w/ MSR[RI]=1 */ +#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */ +#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */ +#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */ +#define IKVM_SKIP .L_IKVM_SKIP_\name\() /* Generate KVM skip handler */ +#define IKVM_REAL .L_IKVM_REAL_\name\() /* Real entry tests KVM */ +#define __IKVM_REAL(name) .L_IKVM_REAL_ ## name +#define IKVM_VIRT .L_IKVM_VIRT_\name\() /* Virt entry tests KVM */ +#define ISTACK .L_ISTACK_\name\() /* Set regular kernel stack */ +#define __ISTACK(name) .L_ISTACK_ ## name +#define IRECONCILE .L_IRECONCILE_\name\() /* Do RECONCILE_IRQ_STATE */ +#define IKUAP .L_IKUAP_\name\() /* Do KUAP lock */ + +#define INT_DEFINE_BEGIN(n) \ +.macro int_define_ ## n name + +#define INT_DEFINE_END(n) \ +.endm ; \ +int_define_ ## n n ; \ +do_define_int n + +.macro do_define_int name + .ifndef IVEC + .error "IVEC not defined" + .endif + .ifndef IHSRR + IHSRR=0 + .endif + .ifndef IHSRR_IF_HVMODE + IHSRR_IF_HVMODE=0 + .endif + .ifndef IAREA + IAREA=PACA_EXGEN + .endif + .ifndef IVIRT + IVIRT=1 + .endif + .ifndef IISIDE + IISIDE=0 + .endif + .ifndef IDAR + IDAR=0 + .endif + .ifndef IDSISR + IDSISR=0 + .endif + .ifndef ISET_RI + ISET_RI=1 + .endif + .ifndef IBRANCH_TO_COMMON + IBRANCH_TO_COMMON=1 + .endif + .ifndef IREALMODE_COMMON + IREALMODE_COMMON=0 + .else + .if ! IBRANCH_TO_COMMON + .error "IREALMODE_COMMON=1 but IBRANCH_TO_COMMON=0" + .endif + .endif + .ifndef IMASK + IMASK=0 + .endif + .ifndef IKVM_SKIP + IKVM_SKIP=0 + .endif + .ifndef IKVM_REAL + IKVM_REAL=0 + .endif + .ifndef IKVM_VIRT + IKVM_VIRT=0 + .endif + .ifndef ISTACK + ISTACK=1 + .endif + .ifndef IRECONCILE + IRECONCILE=1 + .endif + .ifndef IKUAP + IKUAP=1 + .endif .endm #ifdef CONFIG_KVM_BOOK3S_64_HANDLER #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* - * If hv is possible, interrupts come into to the hv version - * of the kvmppc_interrupt code, which then jumps to the PR handler, - * kvmppc_interrupt_pr, if the guest is a PR guest. + * All interrupts which set HSRR registers, as well as SRESET and MCE and + * syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken, + * so they all generally need to test whether they were taken in guest context. + * + * Note: SRESET and MCE may also be sent to the guest by the hypervisor, and be + * taken with MSR[HV]=0. + * + * Interrupts which set SRR registers (with the above exceptions) do not + * elevate to MSR[HV]=1 mode, though most can be taken when running with + * MSR[HV]=1 (e.g., bare metal kernel and userspace). So these interrupts do + * not need to test whether a guest is running because they get delivered to + * the guest directly, including nested HV KVM guests. + * + * The exception is PR KVM, where the guest runs with MSR[PR]=1 and the host + * runs with MSR[HV]=0, so the host takes all interrupts on behalf of the + * guest. PR KVM runs with LPCR[AIL]=0 which causes interrupts to always be + * delivered to the real-mode entry point, therefore such interrupts only test + * KVM in their real mode handlers, and only when PR KVM is possible. + * + * Interrupts that are taken in MSR[HV]=0 and escalate to MSR[HV]=1 are always + * delivered in real-mode when the MMU is in hash mode because the MMU + * registers are not set appropriately to translate host addresses. In nested + * radix mode these can be delivered in virt-mode as the host translations are + * used implicitly (see: effective LPID, effective PID). + */ + +/* + * If an interrupt is taken while a guest is running, it is immediately routed + * to KVM to handle. If both HV and PR KVM arepossible, KVM interrupts go first + * to kvmppc_interrupt_hv, which handles the PR guest case. */ #define kvmppc_interrupt kvmppc_interrupt_hv #else #define kvmppc_interrupt kvmppc_interrupt_pr #endif -.macro KVMTEST name, hsrr, n +.macro KVMTEST name lbz r10,HSTATE_IN_GUEST(r13) cmpwi r10,0 bne \name\()_kvm .endm -.macro KVM_HANDLER vec, hsrr, area, skip - .if \skip +.macro GEN_KVM name + .balign IFETCH_ALIGN_BYTES +\name\()_kvm: + + .if IKVM_SKIP cmpwi r10,KVM_GUEST_MODE_SKIP beq 89f .else -BEGIN_FTR_SECTION_NESTED(947) - ld r10,\area+EX_CFAR(r13) +BEGIN_FTR_SECTION + ld r10,IAREA+EX_CFAR(r13) std r10,HSTATE_CFAR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .endif -BEGIN_FTR_SECTION_NESTED(948) - ld r10,\area+EX_PPR(r13) + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 +BEGIN_FTR_SECTION + ld r10,IAREA+EX_PPR(r13) std r10,HSTATE_PPR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) - ld r10,\area+EX_R10(r13) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) + ld r11,IAREA+EX_R11(r13) + ld r12,IAREA+EX_R12(r13) std r12,HSTATE_SCRATCH0(r13) sldi r12,r9,32 + ld r9,IAREA+EX_R9(r13) + ld r10,IAREA+EX_R10(r13) /* HSRR variants have the 0x2 bit added to their trap number */ - .if \hsrr == EXC_HV_OR_STD + .if IHSRR_IF_HVMODE BEGIN_FTR_SECTION - ori r12,r12,(\vec + 0x2) + ori r12,r12,(IVEC + 0x2) FTR_SECTION_ELSE - ori r12,r12,(\vec) + ori r12,r12,(IVEC) ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - ori r12,r12,(\vec + 0x2) + .elseif IHSRR + ori r12,r12,(IVEC+ 0x2) .else - ori r12,r12,(\vec) + ori r12,r12,(IVEC) .endif - -#ifdef CONFIG_RELOCATABLE - /* - * KVM requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives - * outside the head section. CONFIG_RELOCATABLE KVM expects CTR - * to be saved in HSTATE_SCRATCH1. - */ - mfctr r9 - std r9,HSTATE_SCRATCH1(r13) - __LOAD_FAR_HANDLER(r9, kvmppc_interrupt) - mtctr r9 - ld r9,\area+EX_R9(r13) - bctr -#else - ld r9,\area+EX_R9(r13) b kvmppc_interrupt -#endif - - .if \skip + .if IKVM_SKIP 89: mtocrf 0x80,r9 - ld r9,\area+EX_R9(r13) - ld r10,\area+EX_R10(r13) - .if \hsrr == EXC_HV_OR_STD + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 + ld r9,IAREA+EX_R9(r13) + ld r10,IAREA+EX_R10(r13) + ld r11,IAREA+EX_R11(r13) + ld r12,IAREA+EX_R12(r13) + .if IHSRR_IF_HVMODE BEGIN_FTR_SECTION b kvmppc_skip_Hinterrupt FTR_SECTION_ELSE b kvmppc_skip_interrupt ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr + .elseif IHSRR b kvmppc_skip_Hinterrupt .else b kvmppc_skip_interrupt @@ -284,107 +319,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endm #else -.macro KVMTEST name, hsrr, n +.macro KVMTEST name .endm -.macro KVM_HANDLER name, vec, hsrr, area, skip +.macro GEN_KVM name .endm #endif -.macro INT_SAVE_SRR_AND_JUMP label, hsrr, set_ri - ld r10,PACAKMSR(r13) /* get MSR value for kernel */ - .if ! \set_ri - xori r10,r10,MSR_RI /* Clear MSR_RI */ - .endif - .if \hsrr == EXC_HV_OR_STD - BEGIN_FTR_SECTION - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* and HSRR1 */ - mtspr SPRN_HSRR1,r10 - FTR_SECTION_ELSE - mfspr r11,SPRN_SRR0 /* save SRR0 */ - mfspr r12,SPRN_SRR1 /* and SRR1 */ - mtspr SPRN_SRR1,r10 - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* and HSRR1 */ - mtspr SPRN_HSRR1,r10 - .else - mfspr r11,SPRN_SRR0 /* save SRR0 */ - mfspr r12,SPRN_SRR1 /* and SRR1 */ - mtspr SPRN_SRR1,r10 - .endif - LOAD_HANDLER(r10, \label\()) - .if \hsrr == EXC_HV_OR_STD - BEGIN_FTR_SECTION - mtspr SPRN_HSRR0,r10 - HRFI_TO_KERNEL - FTR_SECTION_ELSE - mtspr SPRN_SRR0,r10 - RFI_TO_KERNEL - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - mtspr SPRN_HSRR0,r10 - HRFI_TO_KERNEL - .else - mtspr SPRN_SRR0,r10 - RFI_TO_KERNEL - .endif - b . /* prevent speculative execution */ -.endm - -/* INT_SAVE_SRR_AND_JUMP works for real or virt, this is faster but virt only */ -.macro INT_VIRT_SAVE_SRR_AND_JUMP label, hsrr -#ifdef CONFIG_RELOCATABLE - .if \hsrr == EXC_HV_OR_STD - BEGIN_FTR_SECTION - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ - FTR_SECTION_ELSE - mfspr r11,SPRN_SRR0 /* save SRR0 */ - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ - .else - mfspr r11,SPRN_SRR0 /* save SRR0 */ - .endif - LOAD_HANDLER(r12, \label\()) - mtctr r12 - .if \hsrr == EXC_HV_OR_STD - BEGIN_FTR_SECTION - mfspr r12,SPRN_HSRR1 /* and HSRR1 */ - FTR_SECTION_ELSE - mfspr r12,SPRN_SRR1 /* and HSRR1 */ - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - mfspr r12,SPRN_HSRR1 /* and HSRR1 */ - .else - mfspr r12,SPRN_SRR1 /* and HSRR1 */ - .endif - li r10,MSR_RI - mtmsrd r10,1 /* Set RI (EE=0) */ - bctr -#else - .if \hsrr == EXC_HV_OR_STD - BEGIN_FTR_SECTION - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* and HSRR1 */ - FTR_SECTION_ELSE - mfspr r11,SPRN_SRR0 /* save SRR0 */ - mfspr r12,SPRN_SRR1 /* and SRR1 */ - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* and HSRR1 */ - .else - mfspr r11,SPRN_SRR0 /* save SRR0 */ - mfspr r12,SPRN_SRR1 /* and SRR1 */ - .endif - li r10,MSR_RI - mtmsrd r10,1 /* Set RI (EE=0) */ - b \label -#endif -.endm - /* * This is the BOOK3S interrupt entry code macro. * @@ -405,14 +345,41 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) * - Fall through and continue executing in real, unrelocated mode. * This is done if early=2. */ -.macro INT_HANDLER name, vec, ool=0, early=0, virt=0, hsrr=0, area=PACA_EXGEN, ri=1, dar=0, dsisr=0, bitmask=0, kvm=0 + +.macro GEN_BRANCH_TO_COMMON name, virt + .if IREALMODE_COMMON + LOAD_HANDLER(r10, \name\()_common) + mtctr r10 + bctr + .else + .if \virt +#ifndef CONFIG_RELOCATABLE + b \name\()_common_virt +#else + LOAD_HANDLER(r10, \name\()_common_virt) + mtctr r10 + bctr +#endif + .else + LOAD_HANDLER(r10, \name\()_common_real) + mtctr r10 + bctr + .endif + .endif +.endm + +.macro GEN_INT_ENTRY name, virt, ool=0 SET_SCRATCH0(r13) /* save r13 */ GET_PACA(r13) - std r9,\area\()+EX_R9(r13) /* save r9 */ - OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR) + std r9,IAREA+EX_R9(r13) /* save r9 */ +BEGIN_FTR_SECTION + mfspr r9,SPRN_PPR +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM - std r10,\area\()+EX_R10(r13) /* save r10 - r12 */ - OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) + std r10,IAREA+EX_R10(r13) /* save r10 - r12 */ +BEGIN_FTR_SECTION + mfspr r10,SPRN_CFAR +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .if \ool .if !\virt b tramp_real_\name @@ -425,47 +392,18 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif .endif - OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR) - OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR) +BEGIN_FTR_SECTION + std r9,IAREA+EX_PPR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION + std r10,IAREA+EX_CFAR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) INTERRUPT_TO_KERNEL - SAVE_CTR(r10, \area\()) + mfctr r10 + std r10,IAREA+EX_CTR(r13) mfcr r9 - .if \kvm - KVMTEST \name \hsrr \vec - .endif - .if \bitmask - lbz r10,PACAIRQSOFTMASK(r13) - andi. r10,r10,\bitmask - /* Associate vector numbers with bits in paca->irq_happened */ - .if \vec == 0x500 || \vec == 0xea0 - li r10,PACA_IRQ_EE - .elseif \vec == 0x900 - li r10,PACA_IRQ_DEC - .elseif \vec == 0xa00 || \vec == 0xe80 - li r10,PACA_IRQ_DBELL - .elseif \vec == 0xe60 - li r10,PACA_IRQ_HMI - .elseif \vec == 0xf00 - li r10,PACA_IRQ_PMI - .else - .abort "Bad maskable vector" - .endif - - .if \hsrr == EXC_HV_OR_STD - BEGIN_FTR_SECTION - bne masked_Hinterrupt - FTR_SECTION_ELSE - bne masked_interrupt - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - bne masked_Hinterrupt - .else - bne masked_interrupt - .endif - .endif - - std r11,\area\()+EX_R11(r13) - std r12,\area\()+EX_R12(r13) + std r11,IAREA+EX_R11(r13) + std r12,IAREA+EX_R12(r13) /* * DAR/DSISR, SCRATCH0 must be read before setting MSR[RI], @@ -473,49 +411,134 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) * not recoverable if they are live. */ GET_SCRATCH0(r10) - std r10,\area\()+EX_R13(r13) - .if \dar - .if \hsrr + std r10,IAREA+EX_R13(r13) + .if IDAR && !IISIDE + .if IHSRR mfspr r10,SPRN_HDAR .else mfspr r10,SPRN_DAR .endif - std r10,\area\()+EX_DAR(r13) + std r10,IAREA+EX_DAR(r13) .endif - .if \dsisr - .if \hsrr + .if IDSISR && !IISIDE + .if IHSRR mfspr r10,SPRN_HDSISR .else mfspr r10,SPRN_DSISR .endif - stw r10,\area\()+EX_DSISR(r13) + stw r10,IAREA+EX_DSISR(r13) .endif - .if \early == 2 - /* nothing more */ - .elseif \early - mfctr r10 /* save ctr, even for !RELOCATABLE */ - BRANCH_TO_C000(r11, \name\()_early_common) - .elseif !\virt - INT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr, \ri + .if IHSRR_IF_HVMODE + BEGIN_FTR_SECTION + mfspr r11,SPRN_HSRR0 /* save HSRR0 */ + mfspr r12,SPRN_HSRR1 /* and HSRR1 */ + FTR_SECTION_ELSE + mfspr r11,SPRN_SRR0 /* save SRR0 */ + mfspr r12,SPRN_SRR1 /* and SRR1 */ + ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) + .elseif IHSRR + mfspr r11,SPRN_HSRR0 /* save HSRR0 */ + mfspr r12,SPRN_HSRR1 /* and HSRR1 */ .else - INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr + mfspr r11,SPRN_SRR0 /* save SRR0 */ + mfspr r12,SPRN_SRR1 /* and SRR1 */ .endif + + .if IBRANCH_TO_COMMON + GEN_BRANCH_TO_COMMON \name \virt + .endif + .if \ool .popsection .endif .endm /* - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. + * __GEN_COMMON_ENTRY is required to receive the branch from interrupt + * entry, except in the case of the real-mode handlers which require + * __GEN_REALMODE_COMMON_ENTRY. * - * If stack=0, then the stack is already set in r1, and r1 is saved in r10. - * PPR save and CPU accounting is not done for the !stack case (XXX why not?) + * This switches to virtual mode and sets MSR[RI]. + */ +.macro __GEN_COMMON_ENTRY name +DEFINE_FIXED_SYMBOL(\name\()_common_real) +\name\()_common_real: + .if IKVM_REAL + KVMTEST \name + .endif + + ld r10,PACAKMSR(r13) /* get MSR value for kernel */ + /* MSR[RI] is clear iff using SRR regs */ + .if IHSRR == EXC_HV_OR_STD + BEGIN_FTR_SECTION + xori r10,r10,MSR_RI + END_FTR_SECTION_IFCLR(CPU_FTR_HVMODE) + .elseif ! IHSRR + xori r10,r10,MSR_RI + .endif + mtmsrd r10 + + .if IVIRT + .if IKVM_VIRT + b 1f /* skip the virt test coming from real */ + .endif + + .balign IFETCH_ALIGN_BYTES +DEFINE_FIXED_SYMBOL(\name\()_common_virt) +\name\()_common_virt: + .if IKVM_VIRT + KVMTEST \name +1: + .endif + .endif /* IVIRT */ +.endm + +/* + * Don't switch to virt mode. Used for early MCE and HMI handlers that + * want to run in real mode. */ -.macro INT_COMMON vec, area, stack, kuap, reconcile, dar, dsisr - .if \stack +.macro __GEN_REALMODE_COMMON_ENTRY name +DEFINE_FIXED_SYMBOL(\name\()_common_real) +\name\()_common_real: + .if IKVM_REAL + KVMTEST \name + .endif +.endm + +.macro __GEN_COMMON_BODY name + .if IMASK + lbz r10,PACAIRQSOFTMASK(r13) + andi. r10,r10,IMASK + /* Associate vector numbers with bits in paca->irq_happened */ + .if IVEC == 0x500 || IVEC == 0xea0 + li r10,PACA_IRQ_EE + .elseif IVEC == 0x900 + li r10,PACA_IRQ_DEC + .elseif IVEC == 0xa00 || IVEC == 0xe80 + li r10,PACA_IRQ_DBELL + .elseif IVEC == 0xe60 + li r10,PACA_IRQ_HMI + .elseif IVEC == 0xf00 + li r10,PACA_IRQ_PMI + .else + .abort "Bad maskable vector" + .endif + + .if IHSRR_IF_HVMODE + BEGIN_FTR_SECTION + bne masked_Hinterrupt + FTR_SECTION_ELSE + bne masked_interrupt + ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) + .elseif IHSRR + bne masked_Hinterrupt + .else + bne masked_interrupt + .endif + .endif + + .if ISTACK andi. r10,r12,MSR_PR /* See if coming from user */ mr r10,r1 /* Save r1 */ subi r1,r1,INT_FRAME_SIZE /* alloc frame on kernel stack */ @@ -532,54 +555,67 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) std r0,GPR0(r1) /* save r0 in stackframe */ std r10,GPR1(r1) /* save r1 in stackframe */ - .if \stack - .if \kuap + .if ISET_RI + li r10,MSR_RI + mtmsrd r10,1 /* Set MSR_RI */ + .endif + + .if ISTACK + .if IKUAP kuap_save_amr_and_lock r9, r10, cr1, cr0 .endif beq 101f /* if from kernel mode */ ACCOUNT_CPU_USER_ENTRY(r13, r9, r10) - SAVE_PPR(\area, r9) +BEGIN_FTR_SECTION + ld r9,IAREA+EX_PPR(r13) /* Read PPR from paca */ + std r9,_PPR(r1) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) 101: .else - .if \kuap + .if IKUAP kuap_save_amr_and_lock r9, r10, cr1 .endif .endif /* Save original regs values from save area to stack frame. */ - ld r9,\area+EX_R9(r13) /* move r9, r10 to stackframe */ - ld r10,\area+EX_R10(r13) + ld r9,IAREA+EX_R9(r13) /* move r9, r10 to stackframe */ + ld r10,IAREA+EX_R10(r13) std r9,GPR9(r1) std r10,GPR10(r1) - ld r9,\area+EX_R11(r13) /* move r11 - r13 to stackframe */ - ld r10,\area+EX_R12(r13) - ld r11,\area+EX_R13(r13) + ld r9,IAREA+EX_R11(r13) /* move r11 - r13 to stackframe */ + ld r10,IAREA+EX_R12(r13) + ld r11,IAREA+EX_R13(r13) std r9,GPR11(r1) std r10,GPR12(r1) std r11,GPR13(r1) - .if \dar - .if \dar == 2 + + SAVE_NVGPRS(r1) + + .if IDAR + .if IISIDE ld r10,_NIP(r1) .else - ld r10,\area+EX_DAR(r13) + ld r10,IAREA+EX_DAR(r13) .endif std r10,_DAR(r1) .endif - .if \dsisr - .if \dsisr == 2 + + .if IDSISR + .if IISIDE ld r10,_MSR(r1) lis r11,DSISR_SRR1_MATCH_64S@h and r10,r10,r11 .else - lwz r10,\area+EX_DSISR(r13) + lwz r10,IAREA+EX_DSISR(r13) .endif std r10,_DSISR(r1) .endif -BEGIN_FTR_SECTION_NESTED(66) - ld r10,\area+EX_CFAR(r13) + +BEGIN_FTR_SECTION + ld r10,IAREA+EX_CFAR(r13) std r10,ORIG_GPR3(r1) -END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) - GET_CTR(r10, \area) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) + ld r10,IAREA+EX_CTR(r13) std r10,_CTR(r1) std r2,GPR2(r1) /* save r2 in stackframe */ SAVE_4GPRS(3, r1) /* save r3 - r6 in stackframe */ @@ -591,32 +627,42 @@ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) mfspr r11,SPRN_XER /* save XER in stackframe */ std r10,SOFTE(r1) std r11,_XER(r1) - li r9,(\vec)+1 + li r9,IVEC std r9,_TRAP(r1) /* set trap number */ li r10,0 ld r11,exception_marker@toc(r2) std r10,RESULT(r1) /* clear regs->result */ std r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame */ - .if \stack + .if ISTACK ACCOUNT_STOLEN_TIME .endif - .if \reconcile + .if IRECONCILE RECONCILE_IRQ_STATE(r10, r11) .endif .endm /* + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + * + * If stack=0, then the stack is already set in r1, and r1 is saved in r10. + * PPR save and CPU accounting is not done for the !stack case (XXX why not?) + */ +.macro GEN_COMMON name + __GEN_COMMON_ENTRY \name + __GEN_COMMON_BODY \name +.endm + +/* * Restore all registers including H/SRR0/1 saved in a stack frame of a * standard exception. */ -.macro EXCEPTION_RESTORE_REGS hsrr +.macro EXCEPTION_RESTORE_REGS hsrr=0 /* Move original SRR0 and SRR1 into the respective regs */ ld r9,_MSR(r1) - .if \hsrr == EXC_HV_OR_STD - .error "EXC_HV_OR_STD Not implemented for EXCEPTION_RESTORE_REGS" - .endif .if \hsrr mtspr SPRN_HSRR1,r9 .else @@ -670,28 +716,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #define FINISH_NAP #endif -#define EXC_COMMON(name, realvec, hdlr) \ - EXC_COMMON_BEGIN(name); \ - INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \ - bl save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b ret_from_except - -/* - * Like EXC_COMMON, but for exceptions that can occur in the idle task and - * therefore need the special idle handling (finish nap and runlatch) - */ -#define EXC_COMMON_ASYNC(name, realvec, hdlr) \ - EXC_COMMON_BEGIN(name); \ - INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \ - FINISH_NAP; \ - RUNLATCH_ON; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b ret_from_except_lite - - /* * There are a few constraints to be concerned with. * - Real mode exceptions code/data must be located at their physical location. @@ -778,6 +802,53 @@ __start_interrupts: EXC_VIRT_NONE(0x4000, 0x100) +/** + * Interrupt 0x100 - System Reset Interrupt (SRESET aka NMI). + * This is a non-maskable, asynchronous interrupt always taken in real-mode. + * It is caused by: + * - Wake from power-saving state, on powernv. + * - An NMI from another CPU, triggered by firmware or hypercall. + * - As crash/debug signal injected from BMC, firmware or hypervisor. + * + * Handling: + * Power-save wakeup is the only performance critical path, so this is + * determined quickly as possible first. In this case volatile registers + * can be discarded and SPRs like CFAR don't need to be read. + * + * If not a powersave wakeup, then it's run as a regular interrupt, however + * it uses its own stack and PACA save area to preserve the regular kernel + * environment for debugging. + * + * This interrupt is not maskable, so triggering it when MSR[RI] is clear, + * or SCRATCH0 is in use, etc. may cause a crash. It's also not entirely + * correct to switch to virtual mode to run the regular interrupt handler + * because it might be interrupted when the MMU is in a bad state (e.g., SLB + * is clear). + * + * FWNMI: + * PAPR specifies a "fwnmi" facility which sends the sreset to a different + * entry point with a different register set up. Some hypervisors will + * send the sreset to 0x100 in the guest if it is not fwnmi capable. + * + * KVM: + * Unlike most SRR interrupts, this may be taken by the host while executing + * in a guest, so a KVM test is required. KVM will pull the CPU out of guest + * mode and then raise the sreset. + */ +INT_DEFINE_BEGIN(system_reset) + IVEC=0x100 + IAREA=PACA_EXNMI + IVIRT=0 /* no virt entry point */ + /* + * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is + * being used, so a nested NMI exception would corrupt it. + */ + ISET_RI=0 + ISTACK=0 + IRECONCILE=0 + IKVM_REAL=1 +INT_DEFINE_END(system_reset) + EXC_REAL_BEGIN(system_reset, 0x100, 0x100) #ifdef CONFIG_PPC_P7_NAP /* @@ -815,11 +886,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) #endif - INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0, kvm=1 + GEN_INT_ENTRY system_reset, virt=0 /* - * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is - * being used, so a nested NMI exception would corrupt it. - * * In theory, we should not enable relocation here if it was disabled * in SRR1, because the MMU may not be configured to support it (e.g., * SLB may have been cleared). In practice, there should only be a few @@ -828,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) */ EXC_REAL_END(system_reset, 0x100, 0x100) EXC_VIRT_NONE(0x4100, 0x100) -INT_KVM_HANDLER system_reset 0x100, EXC_STD, PACA_EXNMI, 0 #ifdef CONFIG_PPC_P7_NAP TRAMP_REAL_BEGIN(system_reset_idle_wake) @@ -843,12 +910,14 @@ TRAMP_REAL_BEGIN(system_reset_idle_wake) * Vectors for the FWNMI option. Share common code. */ TRAMP_REAL_BEGIN(system_reset_fwnmi) - /* See comment at system_reset exception, don't turn on RI */ - INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0 + /* XXX: fwnmi guest could run a nested/PR guest, so why no test? */ + __IKVM_REAL(system_reset)=0 + GEN_INT_ENTRY system_reset, virt=0 #endif /* CONFIG_PPC_PSERIES */ EXC_COMMON_BEGIN(system_reset_common) + __GEN_COMMON_ENTRY system_reset /* * Increment paca->in_nmi then enable MSR_RI. SLB or MCE will be able * to recover, but nested NMI will notice in_nmi and not recover @@ -864,21 +933,21 @@ EXC_COMMON_BEGIN(system_reset_common) mr r10,r1 ld r1,PACA_NMI_EMERG_SP(r13) subi r1,r1,INT_FRAME_SIZE - INT_COMMON 0x100, PACA_EXNMI, 0, 1, 0, 0, 0 - bl save_nvgprs + __GEN_COMMON_BODY system_reset /* - * Set IRQS_ALL_DISABLED unconditionally so arch_irqs_disabled does + * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does * the right thing. We do not want to reconcile because that goes * through irq tracing which we don't want in NMI. * - * Save PACAIRQHAPPENED because some code will do a hard disable - * (e.g., xmon). So we want to restore this back to where it was - * when we return. DAR is unused in the stack, so save it there. + * Save PACAIRQHAPPENED to _DAR (otherwise unused), and set HARD_DIS + * as we are running with MSR[EE]=0. */ li r10,IRQS_ALL_DISABLED stb r10,PACAIRQSOFTMASK(r13) lbz r10,PACAIRQHAPPENED(r13) std r10,_DAR(r1) + ori r10,r10,PACA_IRQ_HARD_DIS + stb r10,PACAIRQHAPPENED(r13) addi r3,r1,STACK_FRAME_OVERHEAD bl system_reset_exception @@ -902,28 +971,95 @@ EXC_COMMON_BEGIN(system_reset_common) ld r10,SOFTE(r1) stb r10,PACAIRQSOFTMASK(r13) - EXCEPTION_RESTORE_REGS EXC_STD + EXCEPTION_RESTORE_REGS RFI_TO_USER_OR_KERNEL + GEN_KVM system_reset -EXC_REAL_BEGIN(machine_check, 0x200, 0x100) - INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1 + +/** + * Interrupt 0x200 - Machine Check Interrupt (MCE). + * This is a non-maskable interrupt always taken in real-mode. It can be + * synchronous or asynchronous, caused by hardware or software, and it may be + * taken in a power-saving state. + * + * Handling: + * Similarly to system reset, this uses its own stack and PACA save area, + * the difference is re-entrancy is allowed on the machine check stack. + * + * machine_check_early is run in real mode, and carefully decodes the + * machine check and tries to handle it (e.g., flush the SLB if there was an + * error detected there), determines if it was recoverable and logs the + * event. + * + * This early code does not "reconcile" irq soft-mask state like SRESET or + * regular interrupts do, so irqs_disabled() among other things may not work + * properly (irq disable/enable already doesn't work because irq tracing can + * not work in real mode). + * + * Then, depending on the execution context when the interrupt is taken, there + * are 3 main actions: + * - Executing in kernel mode. The event is queued with irq_work, which means + * it is handled when it is next safe to do so (i.e., the kernel has enabled + * interrupts), which could be immediately when the interrupt returns. This + * avoids nasty issues like switching to virtual mode when the MMU is in a + * bad state, or when executing OPAL code. (SRESET is exposed to such issues, + * but it has different priorities). Check to see if the CPU was in power + * save, and return via the wake up code if it was. + * + * - Executing in user mode. machine_check_exception is run like a normal + * interrupt handler, which processes the data generated by the early handler. + * + * - Executing in guest mode. The interrupt is run with its KVM test, and + * branches to KVM to deal with. KVM may queue the event for the host + * to report later. + * + * This interrupt is not maskable, so if it triggers when MSR[RI] is clear, + * or SCRATCH0 is in use, it may cause a crash. + * + * KVM: + * See SRESET. + */ +INT_DEFINE_BEGIN(machine_check_early) + IVEC=0x200 + IAREA=PACA_EXMC + IVIRT=0 /* no virt entry point */ + IREALMODE_COMMON=1 /* * MSR_RI is not enabled, because PACA_EXMC is being used, so a * nested machine check corrupts it. machine_check_common enables * MSR_RI. */ + ISET_RI=0 + ISTACK=0 + IDAR=1 + IDSISR=1 + IRECONCILE=0 + IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */ +INT_DEFINE_END(machine_check_early) + +INT_DEFINE_BEGIN(machine_check) + IVEC=0x200 + IAREA=PACA_EXMC + IVIRT=0 /* no virt entry point */ + ISET_RI=0 + IDAR=1 + IDSISR=1 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(machine_check) + +EXC_REAL_BEGIN(machine_check, 0x200, 0x100) + GEN_INT_ENTRY machine_check_early, virt=0 EXC_REAL_END(machine_check, 0x200, 0x100) EXC_VIRT_NONE(0x4200, 0x100) #ifdef CONFIG_PPC_PSERIES TRAMP_REAL_BEGIN(machine_check_fwnmi) /* See comment at machine_check exception, don't turn on RI */ - INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1 + GEN_INT_ENTRY machine_check_early, virt=0 #endif -INT_KVM_HANDLER machine_check 0x200, EXC_STD, PACA_EXMC, 1 - #define MACHINE_CHECK_HANDLER_WINDUP \ /* Clear MSR_RI before setting SRR0 and SRR1. */\ li r9,0; \ @@ -932,12 +1068,10 @@ INT_KVM_HANDLER machine_check 0x200, EXC_STD, PACA_EXMC, 1 lhz r12,PACA_IN_MCE(r13); \ subi r12,r12,1; \ sth r12,PACA_IN_MCE(r13); \ - EXCEPTION_RESTORE_REGS EXC_STD + EXCEPTION_RESTORE_REGS EXC_COMMON_BEGIN(machine_check_early_common) - mtctr r10 /* Restore ctr */ - mfspr r11,SPRN_SRR0 - mfspr r12,SPRN_SRR1 + __GEN_REALMODE_COMMON_ENTRY machine_check_early /* * Switch to mc_emergency stack and handle re-entrancy (we limit @@ -974,8 +1108,7 @@ EXC_COMMON_BEGIN(machine_check_early_common) bgt cr1,unrecoverable_mce /* Check if we hit limit of 4 */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ - /* We don't touch AMR here, we never go to virtual mode */ - INT_COMMON 0x200, PACA_EXMC, 0, 0, 0, 1, 1 + __GEN_COMMON_BODY machine_check_early BEGIN_FTR_SECTION bl enable_machine_check @@ -983,7 +1116,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) li r10,MSR_RI mtmsrd r10,1 - bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl machine_check_early std r3,RESULT(r1) /* Save result */ @@ -1063,23 +1195,25 @@ BEGIN_FTR_SECTION mtspr SPRN_CFAR,r10 END_FTR_SECTION_IFSET(CPU_FTR_CFAR) MACHINE_CHECK_HANDLER_WINDUP - /* See comment at machine_check exception, don't turn on RI */ - INT_HANDLER machine_check, 0x200, area=PACA_EXMC, ri=0, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY machine_check, virt=0 EXC_COMMON_BEGIN(machine_check_common) /* * Machine check is different because we use a different * save area: PACA_EXMC instead of PACA_EXGEN. */ - INT_COMMON 0x200, PACA_EXMC, 1, 1, 1, 1, 1 + GEN_COMMON machine_check + FINISH_NAP /* Enable MSR_RI when finished with PACA_EXMC */ li r10,MSR_RI mtmsrd r10,1 - bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl machine_check_exception - b ret_from_except + b interrupt_return + + GEN_KVM machine_check + #ifdef CONFIG_PPC_P7_NAP /* @@ -1144,21 +1278,48 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) b . +/** + * Interrupt 0x300 - Data Storage Interrupt (DSI). + * This is a synchronous interrupt generated due to a data access exception, + * e.g., a load orstore which does not have a valid page table entry with + * permissions. DAWR matches also fault here, as do RC updates, and minor misc + * errors e.g., copy/paste, AMO, certain invalid CI accesses, etc. + * + * Handling: + * - Hash MMU + * Go to do_hash_page first to see if the HPT can be filled from an entry in + * the Linux page table. Hash faults can hit in kernel mode in a fairly + * arbitrary state (e.g., interrupts disabled, locks held) when accessing + * "non-bolted" regions, e.g., vmalloc space. However these should always be + * backed by Linux page tables. + * + * If none is found, do a Linux page fault. Linux page faults can happen in + * kernel mode due to user copy operations of course. + * + * - Radix MMU + * The hardware loads from the Linux page table directly, so a fault goes + * immediately to Linux page fault. + * + * Conditions like DAWR match are handled on the way in to Linux page fault. + */ +INT_DEFINE_BEGIN(data_access) + IVEC=0x300 + IDAR=1 + IDSISR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_SKIP=1 + IKVM_REAL=1 +#endif +INT_DEFINE_END(data_access) + EXC_REAL_BEGIN(data_access, 0x300, 0x80) - INT_HANDLER data_access, 0x300, ool=1, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY data_access, virt=0 EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) - INT_HANDLER data_access, 0x300, virt=1, dar=1, dsisr=1 + GEN_INT_ENTRY data_access, virt=1 EXC_VIRT_END(data_access, 0x4300, 0x80) -INT_KVM_HANDLER data_access, 0x300, EXC_STD, PACA_EXGEN, 1 EXC_COMMON_BEGIN(data_access_common) - /* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. - * EX_DAR and EX_DSISR have saved DAR/DSISR - */ - INT_COMMON 0x300, PACA_EXGEN, 1, 1, 1, 1, 1 + GEN_COMMON data_access ld r4,_DAR(r1) ld r5,_DSISR(r1) BEGIN_MMU_FTR_SECTION @@ -1169,16 +1330,46 @@ MMU_FTR_SECTION_ELSE b handle_page_fault ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) + GEN_KVM data_access + + +/** + * Interrupt 0x380 - Data Segment Interrupt (DSLB). + * This is a synchronous interrupt in response to an MMU fault missing SLB + * entry for HPT, or an address outside RPT translation range. + * + * Handling: + * - HPT: + * This refills the SLB, or reports an access fault similarly to a bad page + * fault. When coming from user-mode, the SLB handler may access any kernel + * data, though it may itself take a DSLB. When coming from kernel mode, + * recursive faults must be avoided so access is restricted to the kernel + * image text/data, kernel stack, and any data allocated below + * ppc64_bolted_size (first segment). The kernel handler must avoid stomping + * on user-handler data structures. + * + * A dedicated save area EXSLB is used (XXX: but it actually need not be + * these days, we could use EXGEN). + */ +INT_DEFINE_BEGIN(data_access_slb) + IVEC=0x380 + IAREA=PACA_EXSLB + IRECONCILE=0 + IDAR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_SKIP=1 + IKVM_REAL=1 +#endif +INT_DEFINE_END(data_access_slb) EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80) - INT_HANDLER data_access_slb, 0x380, ool=1, area=PACA_EXSLB, dar=1, kvm=1 + GEN_INT_ENTRY data_access_slb, virt=0 EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) - INT_HANDLER data_access_slb, 0x380, virt=1, area=PACA_EXSLB, dar=1 + GEN_INT_ENTRY data_access_slb, virt=1 EXC_VIRT_END(data_access_slb, 0x4380, 0x80) -INT_KVM_HANDLER data_access_slb, 0x380, EXC_STD, PACA_EXSLB, 1 EXC_COMMON_BEGIN(data_access_slb_common) - INT_COMMON 0x380, PACA_EXSLB, 1, 1, 0, 1, 0 + GEN_COMMON data_access_slb ld r4,_DAR(r1) addi r3,r1,STACK_FRAME_OVERHEAD BEGIN_MMU_FTR_SECTION @@ -1186,31 +1377,50 @@ BEGIN_MMU_FTR_SECTION bl do_slb_fault cmpdi r3,0 bne- 1f - b fast_exception_return + b fast_interrupt_return 1: /* Error case */ MMU_FTR_SECTION_ELSE /* Radix case, access is outside page table range */ li r3,-EFAULT ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) std r3,RESULT(r1) - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) ld r4,_DAR(r1) ld r5,RESULT(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl do_bad_slb_fault - b ret_from_except + b interrupt_return + + GEN_KVM data_access_slb +/** + * Interrupt 0x400 - Instruction Storage Interrupt (ISI). + * This is a synchronous interrupt in response to an MMU fault due to an + * instruction fetch. + * + * Handling: + * Similar to DSI, though in response to fetch. The faulting address is found + * in SRR0 (rather than DAR), and status in SRR1 (rather than DSISR). + */ +INT_DEFINE_BEGIN(instruction_access) + IVEC=0x400 + IISIDE=1 + IDAR=1 + IDSISR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(instruction_access) + EXC_REAL_BEGIN(instruction_access, 0x400, 0x80) - INT_HANDLER instruction_access, 0x400, kvm=1 + GEN_INT_ENTRY instruction_access, virt=0 EXC_REAL_END(instruction_access, 0x400, 0x80) EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80) - INT_HANDLER instruction_access, 0x400, virt=1 + GEN_INT_ENTRY instruction_access, virt=1 EXC_VIRT_END(instruction_access, 0x4400, 0x80) -INT_KVM_HANDLER instruction_access, 0x400, EXC_STD, PACA_EXGEN, 0 EXC_COMMON_BEGIN(instruction_access_common) - INT_COMMON 0x400, PACA_EXGEN, 1, 1, 1, 2, 2 + GEN_COMMON instruction_access ld r4,_DAR(r1) ld r5,_DSISR(r1) BEGIN_MMU_FTR_SECTION @@ -1221,16 +1431,37 @@ MMU_FTR_SECTION_ELSE b handle_page_fault ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) + GEN_KVM instruction_access + + +/** + * Interrupt 0x480 - Instruction Segment Interrupt (ISLB). + * This is a synchronous interrupt in response to an MMU fault due to an + * instruction fetch. + * + * Handling: + * Similar to DSLB, though in response to fetch. The faulting address is found + * in SRR0 (rather than DAR). + */ +INT_DEFINE_BEGIN(instruction_access_slb) + IVEC=0x480 + IAREA=PACA_EXSLB + IRECONCILE=0 + IISIDE=1 + IDAR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(instruction_access_slb) EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80) - INT_HANDLER instruction_access_slb, 0x480, area=PACA_EXSLB, kvm=1 + GEN_INT_ENTRY instruction_access_slb, virt=0 EXC_REAL_END(instruction_access_slb, 0x480, 0x80) EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80) - INT_HANDLER instruction_access_slb, 0x480, virt=1, area=PACA_EXSLB + GEN_INT_ENTRY instruction_access_slb, virt=1 EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80) -INT_KVM_HANDLER instruction_access_slb, 0x480, EXC_STD, PACA_EXSLB, 0 EXC_COMMON_BEGIN(instruction_access_slb_common) - INT_COMMON 0x480, PACA_EXSLB, 1, 1, 0, 2, 0 + GEN_COMMON instruction_access_slb ld r4,_DAR(r1) addi r3,r1,STACK_FRAME_OVERHEAD BEGIN_MMU_FTR_SECTION @@ -1238,54 +1469,125 @@ BEGIN_MMU_FTR_SECTION bl do_slb_fault cmpdi r3,0 bne- 1f - b fast_exception_return + b fast_interrupt_return 1: /* Error case */ MMU_FTR_SECTION_ELSE /* Radix case, access is outside page table range */ li r3,-EFAULT ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) std r3,RESULT(r1) - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) ld r4,_DAR(r1) ld r5,RESULT(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl do_bad_slb_fault - b ret_from_except + b interrupt_return + + GEN_KVM instruction_access_slb + + +/** + * Interrupt 0x500 - External Interrupt. + * This is an asynchronous maskable interrupt in response to an "external + * exception" from the interrupt controller or hypervisor (e.g., device + * interrupt). It is maskable in hardware by clearing MSR[EE], and + * soft-maskable with IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * When running in HV mode, Linux sets up the LPCR[LPES] bit such that + * interrupts are delivered with HSRR registers, guests use SRRs, which + * reqiures IHSRR_IF_HVMODE. + * + * On bare metal POWER9 and later, Linux sets the LPCR[HVICE] bit such that + * external interrupts are delivered as Hypervisor Virtualization Interrupts + * rather than External Interrupts. + * + * Handling: + * This calls into Linux IRQ handler. NVGPRs are not saved to reduce overhead, + * because registers at the time of the interrupt are not so important as it is + * asynchronous. + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and clear MSR[EE] in the interrupted context. + */ +INT_DEFINE_BEGIN(hardware_interrupt) + IVEC=0x500 + IHSRR_IF_HVMODE=1 + IMASK=IRQS_DISABLED + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(hardware_interrupt) EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100) - INT_HANDLER hardware_interrupt, 0x500, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY hardware_interrupt, virt=0 EXC_REAL_END(hardware_interrupt, 0x500, 0x100) EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) - INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY hardware_interrupt, virt=1 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) -INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ) +EXC_COMMON_BEGIN(hardware_interrupt_common) + GEN_COMMON hardware_interrupt + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_IRQ + b interrupt_return + + GEN_KVM hardware_interrupt +/** + * Interrupt 0x600 - Alignment Interrupt + * This is a synchronous interrupt in response to data alignment fault. + */ +INT_DEFINE_BEGIN(alignment) + IVEC=0x600 + IDAR=1 + IDSISR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(alignment) + EXC_REAL_BEGIN(alignment, 0x600, 0x100) - INT_HANDLER alignment, 0x600, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY alignment, virt=0 EXC_REAL_END(alignment, 0x600, 0x100) EXC_VIRT_BEGIN(alignment, 0x4600, 0x100) - INT_HANDLER alignment, 0x600, virt=1, dar=1, dsisr=1 + GEN_INT_ENTRY alignment, virt=1 EXC_VIRT_END(alignment, 0x4600, 0x100) -INT_KVM_HANDLER alignment, 0x600, EXC_STD, PACA_EXGEN, 0 EXC_COMMON_BEGIN(alignment_common) - INT_COMMON 0x600, PACA_EXGEN, 1, 1, 1, 1, 1 - bl save_nvgprs + GEN_COMMON alignment addi r3,r1,STACK_FRAME_OVERHEAD bl alignment_exception - b ret_from_except + REST_NVGPRS(r1) /* instruction emulation may change GPRs */ + b interrupt_return + + GEN_KVM alignment +/** + * Interrupt 0x700 - Program Interrupt (program check). + * This is a synchronous interrupt in response to various instruction faults: + * traps, privilege errors, TM errors, floating point exceptions. + * + * Handling: + * This interrupt may use the "emergency stack" in some cases when being taken + * from kernel context, which complicates handling. + */ +INT_DEFINE_BEGIN(program_check) + IVEC=0x700 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(program_check) + EXC_REAL_BEGIN(program_check, 0x700, 0x100) - INT_HANDLER program_check, 0x700, kvm=1 + GEN_INT_ENTRY program_check, virt=0 EXC_REAL_END(program_check, 0x700, 0x100) EXC_VIRT_BEGIN(program_check, 0x4700, 0x100) - INT_HANDLER program_check, 0x700, virt=1 + GEN_INT_ENTRY program_check, virt=1 EXC_VIRT_END(program_check, 0x4700, 0x100) -INT_KVM_HANDLER program_check, 0x700, EXC_STD, PACA_EXGEN, 0 EXC_COMMON_BEGIN(program_check_common) + __GEN_COMMON_ENTRY program_check + /* * It's possible to receive a TM Bad Thing type program check with * userspace register values (in particular r1), but with SRR1 reporting @@ -1310,28 +1612,47 @@ EXC_COMMON_BEGIN(program_check_common) mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ - INT_COMMON 0x700, PACA_EXGEN, 0, 1, 1, 0, 0 + __ISTACK(program_check)=0 + __GEN_COMMON_BODY program_check b 3f 2: - INT_COMMON 0x700, PACA_EXGEN, 1, 1, 1, 0, 0 + __ISTACK(program_check)=1 + __GEN_COMMON_BODY program_check 3: - bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl program_check_exception - b ret_from_except + REST_NVGPRS(r1) /* instruction emulation may change GPRs */ + b interrupt_return + + GEN_KVM program_check +/* + * Interrupt 0x800 - Floating-Point Unavailable Interrupt. + * This is a synchronous interrupt in response to executing an fp instruction + * with MSR[FP]=0. + * + * Handling: + * This will load FP registers and enable the FP bit if coming from userspace, + * otherwise report a bad kernel use of FP. + */ +INT_DEFINE_BEGIN(fp_unavailable) + IVEC=0x800 + IRECONCILE=0 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(fp_unavailable) + EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100) - INT_HANDLER fp_unavailable, 0x800, kvm=1 + GEN_INT_ENTRY fp_unavailable, virt=0 EXC_REAL_END(fp_unavailable, 0x800, 0x100) EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100) - INT_HANDLER fp_unavailable, 0x800, virt=1 + GEN_INT_ENTRY fp_unavailable, virt=1 EXC_VIRT_END(fp_unavailable, 0x4800, 0x100) -INT_KVM_HANDLER fp_unavailable, 0x800, EXC_STD, PACA_EXGEN, 0 EXC_COMMON_BEGIN(fp_unavailable_common) - INT_COMMON 0x800, PACA_EXGEN, 1, 1, 0, 0, 0 + GEN_COMMON fp_unavailable bne 1f /* if from user, just load it up */ - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl kernel_fp_unavailable_exception @@ -1348,64 +1669,168 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_TM) #endif bl load_up_fpu - b fast_exception_return + b fast_interrupt_return #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl fp_unavailable_tm - b ret_from_except + b interrupt_return #endif + GEN_KVM fp_unavailable + + +/** + * Interrupt 0x900 - Decrementer Interrupt. + * This is an asynchronous interrupt in response to a decrementer exception + * (e.g., DEC has wrapped below zero). It is maskable in hardware by clearing + * MSR[EE], and soft-maskable with IRQS_DISABLED mask (i.e., + * local_irq_disable()). + * + * Handling: + * This calls into Linux timer handler. NVGPRs are not saved (see 0x500). + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and bump the decrementer to a high value, leaving MSR[EE] enabled + * in the interrupted context. + * If PPC_WATCHDOG is configured, the soft masked handler will actually set + * things back up to run soft_nmi_interrupt as a regular interrupt handler + * on the emergency stack. + */ +INT_DEFINE_BEGIN(decrementer) + IVEC=0x900 + IMASK=IRQS_DISABLED +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(decrementer) EXC_REAL_BEGIN(decrementer, 0x900, 0x80) - INT_HANDLER decrementer, 0x900, ool=1, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY decrementer, virt=0 EXC_REAL_END(decrementer, 0x900, 0x80) EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) - INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED + GEN_INT_ENTRY decrementer, virt=1 EXC_VIRT_END(decrementer, 0x4900, 0x80) -INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt) +EXC_COMMON_BEGIN(decrementer_common) + GEN_COMMON decrementer + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl timer_interrupt + b interrupt_return + GEN_KVM decrementer + + +/** + * Interrupt 0x980 - Hypervisor Decrementer Interrupt. + * This is an asynchronous interrupt, similar to 0x900 but for the HDEC + * register. + * + * Handling: + * Linux does not use this outside KVM where it's used to keep a host timer + * while the guest is given control of DEC. It should normally be caught by + * the KVM test and routed there. + */ +INT_DEFINE_BEGIN(hdecrementer) + IVEC=0x980 + IHSRR=1 + ISTACK=0 + IRECONCILE=0 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(hdecrementer) EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80) - INT_HANDLER hdecrementer, 0x980, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY hdecrementer, virt=0 EXC_REAL_END(hdecrementer, 0x980, 0x80) EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) - INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY hdecrementer, virt=1 EXC_VIRT_END(hdecrementer, 0x4980, 0x80) -INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt) +EXC_COMMON_BEGIN(hdecrementer_common) + __GEN_COMMON_ENTRY hdecrementer + /* + * Hypervisor decrementer interrupts not caught by the KVM test + * shouldn't occur but are sometimes left pending on exit from a KVM + * guest. We don't need to do anything to clear them, as they are + * edge-triggered. + * + * Be careful to avoid touching the kernel stack. + */ + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 + mtcrf 0x80,r9 + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + HRFI_TO_KERNEL + GEN_KVM hdecrementer + + +/** + * Interrupt 0xa00 - Directed Privileged Doorbell Interrupt. + * This is an asynchronous interrupt in response to a msgsndp doorbell. + * It is maskable in hardware by clearing MSR[EE], and soft-maskable with + * IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * Handling: + * Guests may use this for IPIs between threads in a core if the + * hypervisor supports it. NVGPRS are not saved (see 0x500). + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, leaving MSR[EE] enabled in the interrupted context because the + * doorbells are edge triggered. + */ +INT_DEFINE_BEGIN(doorbell_super) + IVEC=0xa00 + IMASK=IRQS_DISABLED +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(doorbell_super) EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100) - INT_HANDLER doorbell_super, 0xa00, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY doorbell_super, virt=0 EXC_REAL_END(doorbell_super, 0xa00, 0x100) EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) - INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED + GEN_INT_ENTRY doorbell_super, virt=1 EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) -INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0 +EXC_COMMON_BEGIN(doorbell_super_common) + GEN_COMMON doorbell_super + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_DOORBELL -EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception) + bl doorbell_exception #else -EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception) + bl unknown_exception #endif + b interrupt_return + + GEN_KVM doorbell_super EXC_REAL_NONE(0xb00, 0x100) EXC_VIRT_NONE(0x4b00, 0x100) -/* - * system call / hypercall (0xc00, 0x4c00) - * - * The system call exception is invoked with "sc 0" and does not alter HV bit. - * - * The hypercall is invoked with "sc 1" and sets HV=1. +/** + * Interrupt 0xc00 - System Call Interrupt (syscall, hcall). + * This is a synchronous interrupt invoked with the "sc" instruction. The + * system call is invoked with "sc 0" and does not alter the HV bit, so it + * is directed to the currently running OS. The hypercall is invoked with + * "sc 1" and it sets HV=1, so it elevates to hypervisor. * * In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to * 0x4c00 virtual mode. * + * Handling: + * If the KVM test fires then it was due to a hypercall and is accordingly + * routed to KVM. Otherwise this executes a normal Linux system call. + * * Call convention: * * syscall and hypercalls register conventions are documented in @@ -1417,6 +1842,12 @@ EXC_VIRT_NONE(0x4b00, 0x100) * without saving, though xer is not a good idea to use, as hardware may * interpret some bits so it may be costly to change them. */ +INT_DEFINE_BEGIN(system_call) + IVEC=0xc00 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(system_call) + .macro SYSTEM_CALL virt #ifdef CONFIG_KVM_BOOK3S_64_HANDLER /* @@ -1431,7 +1862,7 @@ EXC_VIRT_NONE(0x4b00, 0x100) GET_PACA(r13) std r10,PACA_EXGEN+EX_R10(r13) INTERRUPT_TO_KERNEL - KVMTEST system_call EXC_STD 0xc00 /* uses r10, branch to system_call_kvm */ + KVMTEST system_call /* uses r10, branch to system_call_kvm */ mfctr r9 #else mr r9,r13 @@ -1490,6 +1921,7 @@ EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100) EXC_VIRT_END(system_call, 0x4c00, 0x100) #ifdef CONFIG_KVM_BOOK3S_64_HANDLER +TRAMP_REAL_BEGIN(system_call_kvm) /* * This is a hcall, so register convention is as above, with these * differences: @@ -1497,43 +1929,95 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100) * ctr = orig r13 * orig r10 saved in PACA */ -TRAMP_KVM_BEGIN(system_call_kvm) /* * Save the PPR (on systems that support it) before changing to * HMT_MEDIUM. That allows the KVM code to save that value into the * guest state (it is the guest's PPR value). */ - OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION + mfspr r10,SPRN_PPR + std r10,HSTATE_PPR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM - OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR) mfctr r10 SET_SCRATCH0(r10) - std r9,PACA_EXGEN+EX_R9(r13) - mfcr r9 - KVM_HANDLER 0xc00, EXC_STD, PACA_EXGEN, 0 + mfcr r10 + std r12,HSTATE_SCRATCH0(r13) + sldi r12,r10,32 + ori r12,r12,0xc00 +#ifdef CONFIG_RELOCATABLE + /* + * Requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives + * outside the head section. + */ + __LOAD_FAR_HANDLER(r10, kvmppc_interrupt) + mtctr r10 + ld r10,PACA_EXGEN+EX_R10(r13) + bctr +#else + ld r10,PACA_EXGEN+EX_R10(r13) + b kvmppc_interrupt +#endif #endif +/** + * Interrupt 0xd00 - Trace Interrupt. + * This is a synchronous interrupt in response to instruction step or + * breakpoint faults. + */ +INT_DEFINE_BEGIN(single_step) + IVEC=0xd00 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(single_step) + EXC_REAL_BEGIN(single_step, 0xd00, 0x100) - INT_HANDLER single_step, 0xd00, kvm=1 + GEN_INT_ENTRY single_step, virt=0 EXC_REAL_END(single_step, 0xd00, 0x100) EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100) - INT_HANDLER single_step, 0xd00, virt=1 + GEN_INT_ENTRY single_step, virt=1 EXC_VIRT_END(single_step, 0x4d00, 0x100) -INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON(single_step_common, 0xd00, single_step_exception) +EXC_COMMON_BEGIN(single_step_common) + GEN_COMMON single_step + addi r3,r1,STACK_FRAME_OVERHEAD + bl single_step_exception + b interrupt_return + GEN_KVM single_step + + +/** + * Interrupt 0xe00 - Hypervisor Data Storage Interrupt (HDSI). + * This is a synchronous interrupt in response to an MMU fault caused by a + * guest data access. + * + * Handling: + * This should always get routed to KVM. In radix MMU mode, this is caused + * by a guest nested radix access that can't be performed due to the + * partition scope page table. In hash mode, this can be caused by guests + * running with translation disabled (virtual real mode) or with VPM enabled. + * KVM will update the page table structures or disallow the access. + */ +INT_DEFINE_BEGIN(h_data_storage) + IVEC=0xe00 + IHSRR=1 + IDAR=1 + IDSISR=1 + IKVM_SKIP=1 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_data_storage) EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20) - INT_HANDLER h_data_storage, 0xe00, ool=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY h_data_storage, virt=0, ool=1 EXC_REAL_END(h_data_storage, 0xe00, 0x20) EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20) - INT_HANDLER h_data_storage, 0xe00, ool=1, virt=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY h_data_storage, virt=1, ool=1 EXC_VIRT_END(h_data_storage, 0x4e00, 0x20) -INT_KVM_HANDLER h_data_storage, 0xe00, EXC_HV, PACA_EXGEN, 1 EXC_COMMON_BEGIN(h_data_storage_common) - INT_COMMON 0xe00, PACA_EXGEN, 1, 1, 1, 1, 1 - bl save_nvgprs + GEN_COMMON h_data_storage addi r3,r1,STACK_FRAME_OVERHEAD BEGIN_MMU_FTR_SECTION ld r4,_DAR(r1) @@ -1542,56 +2026,125 @@ BEGIN_MMU_FTR_SECTION MMU_FTR_SECTION_ELSE bl unknown_exception ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) - b ret_from_except + b interrupt_return + GEN_KVM h_data_storage + + +/** + * Interrupt 0xe20 - Hypervisor Instruction Storage Interrupt (HISI). + * This is a synchronous interrupt in response to an MMU fault caused by a + * guest instruction fetch, similar to HDSI. + */ +INT_DEFINE_BEGIN(h_instr_storage) + IVEC=0xe20 + IHSRR=1 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_instr_storage) EXC_REAL_BEGIN(h_instr_storage, 0xe20, 0x20) - INT_HANDLER h_instr_storage, 0xe20, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_instr_storage, virt=0, ool=1 EXC_REAL_END(h_instr_storage, 0xe20, 0x20) EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20) - INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_instr_storage, virt=1, ool=1 EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20) -INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception) +EXC_COMMON_BEGIN(h_instr_storage_common) + GEN_COMMON h_instr_storage + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b interrupt_return + GEN_KVM h_instr_storage + + +/** + * Interrupt 0xe40 - Hypervisor Emulation Assistance Interrupt. + */ +INT_DEFINE_BEGIN(emulation_assist) + IVEC=0xe40 + IHSRR=1 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(emulation_assist) EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20) - INT_HANDLER emulation_assist, 0xe40, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY emulation_assist, virt=0, ool=1 EXC_REAL_END(emulation_assist, 0xe40, 0x20) EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20) - INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY emulation_assist, virt=1, ool=1 EXC_VIRT_END(emulation_assist, 0x4e40, 0x20) -INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt) +EXC_COMMON_BEGIN(emulation_assist_common) + GEN_COMMON emulation_assist + addi r3,r1,STACK_FRAME_OVERHEAD + bl emulation_assist_interrupt + REST_NVGPRS(r1) /* instruction emulation may change GPRs */ + b interrupt_return + GEN_KVM emulation_assist -/* - * hmi_exception trampoline is a special case. It jumps to hmi_exception_early - * first, and then eventaully from there to the trampoline to get into virtual - * mode. + +/** + * Interrupt 0xe60 - Hypervisor Maintenance Interrupt (HMI). + * This is an asynchronous interrupt caused by a Hypervisor Maintenance + * Exception. It is always taken in real mode but uses HSRR registers + * unlike SRESET and MCE. + * + * It is maskable in hardware by clearing MSR[EE], and partially soft-maskable + * with IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * Handling: + * This is a special case, this is handled similarly to machine checks, with an + * initial real mode handler that is not soft-masked, which attempts to fix the + * problem. Then a regular handler which is soft-maskable and reports the + * problem. + * + * The emergency stack is used for the early real mode handler. + * + * XXX: unclear why MCE and HMI schemes could not be made common, e.g., + * either use soft-masking for the MCE, or use irq_work for the HMI. + * + * KVM: + * Unlike MCE, this calls into KVM without calling the real mode handler + * first. */ +INT_DEFINE_BEGIN(hmi_exception_early) + IVEC=0xe60 + IHSRR=1 + IREALMODE_COMMON=1 + ISTACK=0 + IRECONCILE=0 + IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */ + IKVM_REAL=1 +INT_DEFINE_END(hmi_exception_early) + +INT_DEFINE_BEGIN(hmi_exception) + IVEC=0xe60 + IHSRR=1 + IMASK=IRQS_DISABLED + IKVM_REAL=1 +INT_DEFINE_END(hmi_exception) + EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20) - INT_HANDLER hmi_exception, 0xe60, ool=1, early=1, hsrr=EXC_HV, ri=0, kvm=1 + GEN_INT_ENTRY hmi_exception_early, virt=0, ool=1 EXC_REAL_END(hmi_exception, 0xe60, 0x20) EXC_VIRT_NONE(0x4e60, 0x20) -INT_KVM_HANDLER hmi_exception, 0xe60, EXC_HV, PACA_EXGEN, 0 + EXC_COMMON_BEGIN(hmi_exception_early_common) - mtctr r10 /* Restore ctr */ - mfspr r11,SPRN_HSRR0 /* Save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* Save HSRR1 */ + __GEN_REALMODE_COMMON_ENTRY hmi_exception_early + mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ - /* We don't touch AMR here, we never go to virtual mode */ - INT_COMMON 0xe60, PACA_EXGEN, 0, 0, 0, 0, 0 + __GEN_COMMON_BODY hmi_exception_early addi r3,r1,STACK_FRAME_OVERHEAD bl hmi_exception_realmode cmpdi cr0,r3,0 bne 1f - EXCEPTION_RESTORE_REGS EXC_HV + EXCEPTION_RESTORE_REGS hsrr=1 HRFI_TO_USER_OR_KERNEL 1: @@ -1599,41 +2152,84 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) * Go to virtual mode and pull the HMI event information from * firmware. */ - EXCEPTION_RESTORE_REGS EXC_HV - INT_HANDLER hmi_exception, 0xe60, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + EXCEPTION_RESTORE_REGS hsrr=1 + GEN_INT_ENTRY hmi_exception, virt=0 + + GEN_KVM hmi_exception_early EXC_COMMON_BEGIN(hmi_exception_common) - INT_COMMON 0xe60, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON hmi_exception FINISH_NAP RUNLATCH_ON - bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl handle_hmi_exception - b ret_from_except + b interrupt_return + + GEN_KVM hmi_exception +/** + * Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt. + * This is an asynchronous interrupt in response to a msgsnd doorbell. + * Similar to the 0xa00 doorbell but for host rather than guest. + */ +INT_DEFINE_BEGIN(h_doorbell) + IVEC=0xe80 + IHSRR=1 + IMASK=IRQS_DISABLED + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_doorbell) + EXC_REAL_BEGIN(h_doorbell, 0xe80, 0x20) - INT_HANDLER h_doorbell, 0xe80, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_doorbell, virt=0, ool=1 EXC_REAL_END(h_doorbell, 0xe80, 0x20) EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) - INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_doorbell, virt=1, ool=1 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) -INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0 +EXC_COMMON_BEGIN(h_doorbell_common) + GEN_COMMON h_doorbell + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_DOORBELL -EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception) + bl doorbell_exception #else -EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception) + bl unknown_exception #endif + b interrupt_return + + GEN_KVM h_doorbell +/** + * Interrupt 0xea0 - Hypervisor Virtualization Interrupt. + * This is an asynchronous interrupt in response to an "external exception". + * Similar to 0x500 but for host only. + */ +INT_DEFINE_BEGIN(h_virt_irq) + IVEC=0xea0 + IHSRR=1 + IMASK=IRQS_DISABLED + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_virt_irq) + EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20) - INT_HANDLER h_virt_irq, 0xea0, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_virt_irq, virt=0, ool=1 EXC_REAL_END(h_virt_irq, 0xea0, 0x20) EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) - INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_virt_irq, virt=1, ool=1 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) -INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ) +EXC_COMMON_BEGIN(h_virt_irq_common) + GEN_COMMON h_virt_irq + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_IRQ + b interrupt_return + + GEN_KVM h_virt_irq EXC_REAL_NONE(0xec0, 0x20) @@ -1642,25 +2238,69 @@ EXC_REAL_NONE(0xee0, 0x20) EXC_VIRT_NONE(0x4ee0, 0x20) +/* + * Interrupt 0xf00 - Performance Monitor Interrupt (PMI, PMU). + * This is an asynchronous interrupt in response to a PMU exception. + * It is maskable in hardware by clearing MSR[EE], and soft-maskable with + * IRQS_PMI_DISABLED mask (NOTE: NOT local_irq_disable()). + * + * Handling: + * This calls into the perf subsystem. + * + * Like the watchdog soft-nmi, it appears an NMI interrupt to Linux, in that it + * runs under local_irq_disable. However it may be soft-masked in + * powerpc-specific code. + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and clear MSR[EE] in the interrupted context. + */ +INT_DEFINE_BEGIN(performance_monitor) + IVEC=0xf00 + IMASK=IRQS_PMI_DISABLED +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(performance_monitor) + EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20) - INT_HANDLER performance_monitor, 0xf00, ool=1, bitmask=IRQS_PMI_DISABLED, kvm=1 + GEN_INT_ENTRY performance_monitor, virt=0, ool=1 EXC_REAL_END(performance_monitor, 0xf00, 0x20) EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) - INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED + GEN_INT_ENTRY performance_monitor, virt=1, ool=1 EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) -INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception) +EXC_COMMON_BEGIN(performance_monitor_common) + GEN_COMMON performance_monitor + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl performance_monitor_exception + b interrupt_return + + GEN_KVM performance_monitor +/** + * Interrupt 0xf20 - Vector Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing a vector (or altivec) instruction with MSR[VEC]=0. + * Similar to FP unavailable. + */ +INT_DEFINE_BEGIN(altivec_unavailable) + IVEC=0xf20 + IRECONCILE=0 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(altivec_unavailable) + EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20) - INT_HANDLER altivec_unavailable, 0xf20, ool=1, kvm=1 + GEN_INT_ENTRY altivec_unavailable, virt=0, ool=1 EXC_REAL_END(altivec_unavailable, 0xf20, 0x20) EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20) - INT_HANDLER altivec_unavailable, 0xf20, ool=1, virt=1 + GEN_INT_ENTRY altivec_unavailable, virt=1, ool=1 EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20) -INT_KVM_HANDLER altivec_unavailable, 0xf20, EXC_STD, PACA_EXGEN, 0 EXC_COMMON_BEGIN(altivec_unavailable_common) - INT_COMMON 0xf20, PACA_EXGEN, 1, 1, 0, 0, 0 + GEN_COMMON altivec_unavailable #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION beq 1f @@ -1674,34 +2314,47 @@ BEGIN_FTR_SECTION END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) #endif bl load_up_altivec - b fast_exception_return + b fast_interrupt_return #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl altivec_unavailable_tm - b ret_from_except + b interrupt_return #endif 1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl altivec_unavailable_exception - b ret_from_except + b interrupt_return + GEN_KVM altivec_unavailable + + +/** + * Interrupt 0xf40 - VSX Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing a VSX instruction with MSR[VSX]=0. + * Similar to FP unavailable. + */ +INT_DEFINE_BEGIN(vsx_unavailable) + IVEC=0xf40 + IRECONCILE=0 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(vsx_unavailable) EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20) - INT_HANDLER vsx_unavailable, 0xf40, ool=1, kvm=1 + GEN_INT_ENTRY vsx_unavailable, virt=0, ool=1 EXC_REAL_END(vsx_unavailable, 0xf40, 0x20) EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20) - INT_HANDLER vsx_unavailable, 0xf40, ool=1, virt=1 + GEN_INT_ENTRY vsx_unavailable, virt=1, ool=1 EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20) -INT_KVM_HANDLER vsx_unavailable, 0xf40, EXC_STD, PACA_EXGEN, 0 EXC_COMMON_BEGIN(vsx_unavailable_common) - INT_COMMON 0xf40, PACA_EXGEN, 1, 1, 0, 0, 0 + GEN_COMMON vsx_unavailable #ifdef CONFIG_VSX BEGIN_FTR_SECTION beq 1f @@ -1717,40 +2370,78 @@ BEGIN_FTR_SECTION b load_up_vsx #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl vsx_unavailable_tm - b ret_from_except + b interrupt_return #endif 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif - bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl vsx_unavailable_exception - b ret_from_except + b interrupt_return + + GEN_KVM vsx_unavailable + +/** + * Interrupt 0xf60 - Facility Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing an instruction without access to the facility that can be + * resolved by the OS (e.g., FSCR, MSR). + * Similar to FP unavailable. + */ +INT_DEFINE_BEGIN(facility_unavailable) + IVEC=0xf60 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(facility_unavailable) EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20) - INT_HANDLER facility_unavailable, 0xf60, ool=1, kvm=1 + GEN_INT_ENTRY facility_unavailable, virt=0, ool=1 EXC_REAL_END(facility_unavailable, 0xf60, 0x20) EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20) - INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1 + GEN_INT_ENTRY facility_unavailable, virt=1, ool=1 EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20) -INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception) +EXC_COMMON_BEGIN(facility_unavailable_common) + GEN_COMMON facility_unavailable + addi r3,r1,STACK_FRAME_OVERHEAD + bl facility_unavailable_exception + b interrupt_return + GEN_KVM facility_unavailable + + +/** + * Interrupt 0xf60 - Hypervisor Facility Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing an instruction without access to the facility that can only + * be resolved in HV mode (e.g., HFSCR). + * Similar to FP unavailable. + */ +INT_DEFINE_BEGIN(h_facility_unavailable) + IVEC=0xf80 + IHSRR=1 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_facility_unavailable) EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20) - INT_HANDLER h_facility_unavailable, 0xf80, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_facility_unavailable, virt=0, ool=1 EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20) EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20) - INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_facility_unavailable, virt=1, ool=1 EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20) -INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception) +EXC_COMMON_BEGIN(h_facility_unavailable_common) + GEN_COMMON h_facility_unavailable + addi r3,r1,STACK_FRAME_OVERHEAD + bl facility_unavailable_exception + b interrupt_return + + GEN_KVM h_facility_unavailable EXC_REAL_NONE(0xfa0, 0x20) @@ -1766,56 +2457,95 @@ EXC_REAL_NONE(0x1100, 0x100) EXC_VIRT_NONE(0x5100, 0x100) #ifdef CONFIG_CBE_RAS +INT_DEFINE_BEGIN(cbe_system_error) + IVEC=0x1200 + IHSRR=1 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(cbe_system_error) + EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) - INT_HANDLER cbe_system_error, 0x1200, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY cbe_system_error, virt=0 EXC_REAL_END(cbe_system_error, 0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) -INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1 -EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception) +EXC_COMMON_BEGIN(cbe_system_error_common) + GEN_COMMON cbe_system_error + addi r3,r1,STACK_FRAME_OVERHEAD + bl cbe_system_error_exception + b interrupt_return + + GEN_KVM cbe_system_error + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) #endif +INT_DEFINE_BEGIN(instruction_breakpoint) + IVEC=0x1300 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_SKIP=1 + IKVM_REAL=1 +#endif +INT_DEFINE_END(instruction_breakpoint) + EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100) - INT_HANDLER instruction_breakpoint, 0x1300, kvm=1 + GEN_INT_ENTRY instruction_breakpoint, virt=0 EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100) EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100) - INT_HANDLER instruction_breakpoint, 0x1300, virt=1 + GEN_INT_ENTRY instruction_breakpoint, virt=1 EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100) -INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1 -EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception) +EXC_COMMON_BEGIN(instruction_breakpoint_common) + GEN_COMMON instruction_breakpoint + addi r3,r1,STACK_FRAME_OVERHEAD + bl instruction_breakpoint_exception + b interrupt_return + + GEN_KVM instruction_breakpoint EXC_REAL_NONE(0x1400, 0x100) EXC_VIRT_NONE(0x5400, 0x100) -EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100) - INT_HANDLER denorm_exception_hv, 0x1500, early=2, hsrr=EXC_HV +/** + * Interrupt 0x1500 - Soft Patch Interrupt + * + * Handling: + * This is an implementation specific interrupt which can be used for a + * range of exceptions. + * + * This interrupt handler is unique in that it runs the denormal assist + * code even for guests (and even in guest context) without going to KVM, + * for speed. POWER9 does not raise denorm exceptions, so this special case + * could be phased out in future to reduce special cases. + */ +INT_DEFINE_BEGIN(denorm_exception) + IVEC=0x1500 + IHSRR=1 + IBRANCH_COMMON=0 + IKVM_REAL=1 +INT_DEFINE_END(denorm_exception) + +EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100) + GEN_INT_ENTRY denorm_exception, virt=0 #ifdef CONFIG_PPC_DENORMALISATION - mfspr r10,SPRN_HSRR1 - andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ + andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist #endif - KVMTEST denorm_exception_hv, EXC_HV 0x1500 - INT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV, 1 -EXC_REAL_END(denorm_exception_hv, 0x1500, 0x100) - + GEN_BRANCH_TO_COMMON denorm_exception, virt=0 +EXC_REAL_END(denorm_exception, 0x1500, 0x100) #ifdef CONFIG_PPC_DENORMALISATION EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100) - INT_HANDLER denorm_exception, 0x1500, 0, 2, 1, EXC_HV, PACA_EXGEN, 1, 0, 0, 0, 0 - mfspr r10,SPRN_HSRR1 - andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ + GEN_INT_ENTRY denorm_exception, virt=1 + andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist - INT_VIRT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV + GEN_BRANCH_TO_COMMON denorm_exception, virt=1 EXC_VIRT_END(denorm_exception, 0x5500, 0x100) #else EXC_VIRT_NONE(0x5500, 0x100) #endif -INT_KVM_HANDLER denorm_exception_hv, 0x1500, EXC_HV, PACA_EXGEN, 0 - #ifdef CONFIG_PPC_DENORMALISATION TRAMP_REAL_BEGIN(denorm_assist) BEGIN_FTR_SECTION @@ -1872,7 +2602,10 @@ denorm_done: mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) - RESTORE_PPR_PACA(PACA_EXGEN, r10) +BEGIN_FTR_SECTION + ld r10,PACA_EXGEN+EX_PPR(r13) + mtspr SPRN_PPR,r10 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) BEGIN_FTR_SECTION ld r10,PACA_EXGEN+EX_CFAR(r13) mtspr SPRN_CFAR,r10 @@ -1885,43 +2618,88 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) b . #endif -EXC_COMMON(denorm_common, 0x1500, unknown_exception) +EXC_COMMON_BEGIN(denorm_exception_common) + GEN_COMMON denorm_exception + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b interrupt_return + + GEN_KVM denorm_exception #ifdef CONFIG_CBE_RAS +INT_DEFINE_BEGIN(cbe_maintenance) + IVEC=0x1600 + IHSRR=1 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(cbe_maintenance) + EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) - INT_HANDLER cbe_maintenance, 0x1600, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY cbe_maintenance, virt=0 EXC_REAL_END(cbe_maintenance, 0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100) -INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1 -EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception) +EXC_COMMON_BEGIN(cbe_maintenance_common) + GEN_COMMON cbe_maintenance + addi r3,r1,STACK_FRAME_OVERHEAD + bl cbe_maintenance_exception + b interrupt_return + + GEN_KVM cbe_maintenance + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100) #endif +INT_DEFINE_BEGIN(altivec_assist) + IVEC=0x1700 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + IKVM_REAL=1 +#endif +INT_DEFINE_END(altivec_assist) + EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100) - INT_HANDLER altivec_assist, 0x1700, kvm=1 + GEN_INT_ENTRY altivec_assist, virt=0 EXC_REAL_END(altivec_assist, 0x1700, 0x100) EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100) - INT_HANDLER altivec_assist, 0x1700, virt=1 + GEN_INT_ENTRY altivec_assist, virt=1 EXC_VIRT_END(altivec_assist, 0x5700, 0x100) -INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0 +EXC_COMMON_BEGIN(altivec_assist_common) + GEN_COMMON altivec_assist + addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_ALTIVEC -EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception) + bl altivec_assist_exception + REST_NVGPRS(r1) /* instruction emulation may change GPRs */ #else -EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception) + bl unknown_exception #endif + b interrupt_return + + GEN_KVM altivec_assist #ifdef CONFIG_CBE_RAS +INT_DEFINE_BEGIN(cbe_thermal) + IVEC=0x1800 + IHSRR=1 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(cbe_thermal) + EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) - INT_HANDLER cbe_thermal, 0x1800, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY cbe_thermal, virt=0 EXC_REAL_END(cbe_thermal, 0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100) -INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1 -EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception) +EXC_COMMON_BEGIN(cbe_thermal_common) + GEN_COMMON cbe_thermal + addi r3,r1,STACK_FRAME_OVERHEAD + bl cbe_thermal_exception + b interrupt_return + + GEN_KVM cbe_thermal + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100) @@ -1930,14 +2708,11 @@ EXC_VIRT_NONE(0x5800, 0x100) #ifdef CONFIG_PPC_WATCHDOG -#define MASKED_DEC_HANDLER_LABEL 3f - -#define MASKED_DEC_HANDLER(_H) \ -3: /* soft-nmi */ \ - std r12,PACA_EXGEN+EX_R12(r13); \ - GET_SCRATCH0(r10); \ - std r10,PACA_EXGEN+EX_R13(r13); \ - INT_SAVE_SRR_AND_JUMP soft_nmi_common, _H, 1 +INT_DEFINE_BEGIN(soft_nmi) + IVEC=0x900 + ISTACK=0 + IRECONCILE=0 /* Soft-NMI may fire under local_irq_disable */ +INT_DEFINE_END(soft_nmi) /* * Branch to soft_nmi_interrupt using the emergency stack. The emergency @@ -1949,18 +2724,42 @@ EXC_VIRT_NONE(0x5800, 0x100) * and run it entirely with interrupts hard disabled. */ EXC_COMMON_BEGIN(soft_nmi_common) + mfspr r11,SPRN_SRR0 mr r10,r1 ld r1,PACAEMERGSP(r13) subi r1,r1,INT_FRAME_SIZE - INT_COMMON 0x900, PACA_EXGEN, 0, 1, 1, 0, 0 - bl save_nvgprs + __GEN_COMMON_BODY soft_nmi + + /* + * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see + * system_reset_common) + */ + li r10,IRQS_ALL_DISABLED + stb r10,PACAIRQSOFTMASK(r13) + lbz r10,PACAIRQHAPPENED(r13) + std r10,_DAR(r1) + ori r10,r10,PACA_IRQ_HARD_DIS + stb r10,PACAIRQHAPPENED(r13) + addi r3,r1,STACK_FRAME_OVERHEAD bl soft_nmi_interrupt - b ret_from_except -#else /* CONFIG_PPC_WATCHDOG */ -#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */ -#define MASKED_DEC_HANDLER(_H) + /* Clear MSR_RI before setting SRR0 and SRR1. */ + li r9,0 + mtmsrd r9,1 + + /* + * Restore soft mask settings. + */ + ld r10,_DAR(r1) + stb r10,PACAIRQHAPPENED(r13) + ld r10,SOFTE(r1) + stb r10,PACAIRQSOFTMASK(r13) + + kuap_restore_amr r10 + EXCEPTION_RESTORE_REGS hsrr=0 + RFI_TO_KERNEL + #endif /* CONFIG_PPC_WATCHDOG */ /* @@ -1973,13 +2772,12 @@ EXC_COMMON_BEGIN(soft_nmi_common) * - Else it is one of PACA_IRQ_MUST_HARD_MASK, so hard disable and return. * This is called with r10 containing the value to OR to the paca field. */ -.macro MASKED_INTERRUPT hsrr +.macro MASKED_INTERRUPT hsrr=0 .if \hsrr masked_Hinterrupt: .else masked_interrupt: .endif - std r11,PACA_EXGEN+EX_R11(r13) lbz r11,PACAIRQHAPPENED(r13) or r11,r11,r10 stb r11,PACAIRQHAPPENED(r13) @@ -1988,26 +2786,30 @@ masked_interrupt: lis r10,0x7fff ori r10,r10,0xffff mtspr SPRN_DEC,r10 - b MASKED_DEC_HANDLER_LABEL +#ifdef CONFIG_PPC_WATCHDOG + b soft_nmi_common +#else + b 2f +#endif 1: andi. r10,r10,PACA_IRQ_MUST_HARD_MASK beq 2f + xori r12,r12,MSR_EE /* clear MSR_EE */ .if \hsrr - mfspr r10,SPRN_HSRR1 - xori r10,r10,MSR_EE /* clear MSR_EE */ - mtspr SPRN_HSRR1,r10 + mtspr SPRN_HSRR1,r12 .else - mfspr r10,SPRN_SRR1 - xori r10,r10,MSR_EE /* clear MSR_EE */ - mtspr SPRN_SRR1,r10 + mtspr SPRN_SRR1,r12 .endif ori r11,r11,PACA_IRQ_HARD_DIS stb r11,PACAIRQHAPPENED(r13) 2: /* done */ + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 mtcrf 0x80,r9 std r1,PACAR1(r13) ld r9,PACA_EXGEN+EX_R9(r13) ld r10,PACA_EXGEN+EX_R10(r13) ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) /* returns to kernel where r13 must be set up, so don't restore it */ .if \hsrr HRFI_TO_KERNEL @@ -2015,7 +2817,6 @@ masked_interrupt: RFI_TO_KERNEL .endif b . - MASKED_DEC_HANDLER(\hsrr\()) .endm TRAMP_REAL_BEGIN(stf_barrier_fallback) @@ -2117,17 +2918,12 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) GET_SCRATCH0(r13); hrfid -/* - * Real mode exceptions actually use this too, but alternate - * instruction code patches (which end up in the common .text area) - * cannot reach these if they are put there. - */ -USE_FIXED_SECTION(virt_trampolines) - MASKED_INTERRUPT EXC_STD - MASKED_INTERRUPT EXC_HV +USE_TEXT_SECTION() + MASKED_INTERRUPT + MASKED_INTERRUPT hsrr=1 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER -TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) +kvmppc_skip_interrupt: /* * Here all GPRs are unchanged from when the interrupt happened * except for r13, which is saved in SPRG_SCRATCH0. @@ -2139,7 +2935,7 @@ TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) RFI_TO_KERNEL b . -TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) +kvmppc_skip_Hinterrupt: /* * Here all GPRs are unchanged from when the interrupt happened * except for r13, which is saved in SPRG_SCRATCH0. @@ -2152,16 +2948,6 @@ TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) b . #endif -/* - * Ensure that any handlers that get invoked from the exception prologs - * above are below the first 64KB (0x10000) of the kernel image because - * the prologs assemble the addresses of these handlers using the - * LOAD_HANDLER macro, which uses an ori instruction. - */ - -/*** Common interrupt handlers ***/ - - /* * Relocation-on interrupts: A subset of the interrupts can be delivered * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering @@ -2275,7 +3061,7 @@ do_hash_page: cmpdi r3,0 /* see if __hash_page succeeded */ /* Success */ - beq fast_exc_return_irq /* Return from exception on success */ + beq interrupt_return /* Return from exception on success */ /* Error */ blt- 13f @@ -2292,39 +3078,36 @@ handle_page_fault: addi r3,r1,STACK_FRAME_OVERHEAD bl do_page_fault cmpdi r3,0 - beq+ ret_from_except_lite - bl save_nvgprs + beq+ interrupt_return mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) bl bad_page_fault - b ret_from_except + b interrupt_return /* We have a data breakpoint exception - handle it */ handle_dabr_fault: - bl save_nvgprs ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl do_break /* * do_break() may have changed the NV GPRS while handling a breakpoint. - * If so, we need to restore them with their updated values. Don't use - * ret_from_except_lite here. + * If so, we need to restore them with their updated values. */ - b ret_from_except + REST_NVGPRS(r1) + b interrupt_return #ifdef CONFIG_PPC_BOOK3S_64 /* We have a page fault that hash_page could handle but HV refused * the PTE insertion */ -13: bl save_nvgprs - mr r5,r3 +13: mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) bl low_hash_fault - b ret_from_except + b interrupt_return #endif /* @@ -2334,74 +3117,7 @@ handle_dabr_fault: * were soft-disabled. We want to invoke the exception handler for * the access, or panic if there isn't a handler. */ -77: bl save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD +77: addi r3,r1,STACK_FRAME_OVERHEAD li r5,SIGSEGV bl bad_page_fault - b ret_from_except - -/* - * When doorbell is triggered from system reset wakeup, the message is - * not cleared, so it would fire again when EE is enabled. - * - * When coming from local_irq_enable, there may be the same problem if - * we were hard disabled. - * - * Execute msgclr to clear pending exceptions before handling it. - */ -h_doorbell_common_msgclr: - LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36)) - PPC_MSGCLR(3) - b h_doorbell_common - -doorbell_super_common_msgclr: - LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36)) - PPC_MSGCLRP(3) - b doorbell_super_common - -/* - * Called from arch_local_irq_enable when an interrupt needs - * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate - * which kind of interrupt. MSR:EE is already off. We generate a - * stackframe like if a real interrupt had happened. - * - * Note: While MSR:EE is off, we need to make sure that _MSR - * in the generated frame has EE set to 1 or the exception - * handler will not properly re-enable them. - * - * Note that we don't specify LR as the NIP (return address) for - * the interrupt because that would unbalance the return branch - * predictor. - */ -_GLOBAL(__replay_interrupt) - /* We are going to jump to the exception common code which - * will retrieve various register values from the PACA which - * we don't give a damn about, so we don't bother storing them. - */ - mfmsr r12 - LOAD_REG_ADDR(r11, replay_interrupt_return) - mfcr r9 - ori r12,r12,MSR_EE - cmpwi r3,0x900 - beq decrementer_common - cmpwi r3,0x500 -BEGIN_FTR_SECTION - beq h_virt_irq_common -FTR_SECTION_ELSE - beq hardware_interrupt_common -ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_300) - cmpwi r3,0xf00 - beq performance_monitor_common -BEGIN_FTR_SECTION - cmpwi r3,0xa00 - beq h_doorbell_common_msgclr - cmpwi r3,0xe60 - beq hmi_exception_common -FTR_SECTION_ELSE - cmpwi r3,0xa00 - beq doorbell_super_common_msgclr -ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) -replay_interrupt_return: - blr - -_ASM_NOKPROBE_SYMBOL(__replay_interrupt) + b interrupt_return |