diff options
Diffstat (limited to 'arch/powerpc/kernel/pci_32.c')
-rw-r--r-- | arch/powerpc/kernel/pci_32.c | 510 |
1 files changed, 15 insertions, 495 deletions
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index e66064b5093a..0adf077f3f3a 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -55,8 +55,7 @@ static u8* pci_to_OF_bus_map; */ int pci_assign_all_buses; -struct pci_controller* hose_head; -struct pci_controller** hose_tail = &hose_head; +LIST_HEAD(hose_list); static int pci_bus_count; @@ -573,58 +572,6 @@ pcibios_assign_resources(void) } } - -int -pcibios_enable_resources(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx=0; idx<6; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1<<idx))) - continue; - - r = &dev->resource[idx]; - if (r->flags & IORESOURCE_UNSET) { - printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -static int next_controller_index; - -struct pci_controller * __init -pcibios_alloc_controller(void) -{ - struct pci_controller *hose; - - hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose)); - memset(hose, 0, sizeof(struct pci_controller)); - - *hose_tail = hose; - hose_tail = &hose->next; - - hose->index = next_controller_index++; - - return hose; -} - #ifdef CONFIG_PPC_OF /* * Functions below are used on OpenFirmware machines. @@ -670,7 +617,7 @@ void pcibios_make_OF_bus_map(void) { int i; - struct pci_controller* hose; + struct pci_controller *hose, *tmp; struct property *map_prop; struct device_node *dn; @@ -687,7 +634,7 @@ pcibios_make_OF_bus_map(void) pci_to_OF_bus_map[i] = 0xff; /* For each hose, we begin searching bridges */ - for(hose=hose_head; hose; hose=hose->next) { + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { struct device_node* node; node = (struct device_node *)hose->arch_data; if (!node) @@ -765,7 +712,7 @@ static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus) /* Are we a root bus ? */ if (bus->self == NULL || bus->parent == NULL) { - struct pci_controller *hose = pci_bus_to_hose(bus->number); + struct pci_controller *hose = pci_bus_to_host(bus); if (hose == NULL) return NULL; return of_node_get(hose->arch_data); @@ -818,27 +765,6 @@ pci_device_to_OF_node(struct pci_dev *dev) } EXPORT_SYMBOL(pci_device_to_OF_node); -/* This routine is meant to be used early during boot, when the - * PCI bus numbers have not yet been assigned, and you need to - * issue PCI config cycles to an OF device. - * It could also be used to "fix" RTAS config cycles if you want - * to set pci_assign_all_buses to 1 and still use RTAS for PCI - * config cycles. - */ -struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) -{ - if (!have_of) - return NULL; - while(node) { - struct pci_controller* hose; - for (hose=hose_head;hose;hose=hose->next) - if (hose->arch_data == node) - return hose; - node=node->parent; - } - return NULL; -} - static int find_OF_pci_device_filter(struct device_node* node, void* data) { @@ -1027,34 +953,12 @@ pci_create_OF_bus_map(void) } } -static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev (dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - #else /* CONFIG_PPC_OF */ void pcibios_make_OF_bus_map(void) { } #endif /* CONFIG_PPC_OF */ -/* Add sysfs properties */ -void pcibios_add_platform_entries(struct pci_dev *pdev) -{ -#ifdef CONFIG_PPC_OF - device_create_file(&pdev->dev, &dev_attr_devspec); -#endif /* CONFIG_PPC_OF */ -} - - #ifdef CONFIG_PPC_PMAC /* * This set of routines checks for PCI<->PCI bridges that have closed @@ -1269,14 +1173,14 @@ pcibios_fixup_p2p_bridges(void) static int __init pcibios_init(void) { - struct pci_controller *hose; + struct pci_controller *hose, *tmp; struct pci_bus *bus; - int next_busno; + int next_busno = 0; printk(KERN_INFO "PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ - for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { if (pci_assign_all_buses) hose->first_busno = next_busno; hose->last_busno = 0xff; @@ -1319,12 +1223,6 @@ pcibios_init(void) subsys_initcall(pcibios_init); -unsigned long resource_fixup(struct pci_dev * dev, struct resource * res, - unsigned long start, unsigned long size) -{ - return start; -} - void __init pcibios_fixup_bus(struct pci_bus *bus) { struct pci_controller *hose = (struct pci_controller *) bus->sysdata; @@ -1342,7 +1240,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) if (!res->flags) { if (io_offset) printk(KERN_ERR "I/O resource not set for host" - " bridge %d\n", hose->index); + " bridge %d\n", hose->global_number); res->start = 0; res->end = IO_SPACE_LIMIT; res->flags = IORESOURCE_IO; @@ -1356,7 +1254,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) if (i > 0) continue; printk(KERN_ERR "Memory resource not set for " - "host bridge %d\n", hose->index); + "host bridge %d\n", hose->global_number); res->start = hose->pci_mem_offset; res->end = ~0U; res->flags = IORESOURCE_MEM; @@ -1370,7 +1268,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) for (i = 0; i < 4; ++i) { if ((res = bus->resource[i]) == NULL) continue; - if (!res->flags) + if (!res->flags || bus->self->transparent) continue; if (io_offset && (res->flags & IORESOURCE_IO)) { res->start += io_offset; @@ -1395,11 +1293,6 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) } } -char __init *pcibios_setup(char *str) -{ - return str; -} - /* the next one is stolen from the alpha port... */ void __init pcibios_update_irq(struct pci_dev *dev, int irq) @@ -1408,64 +1301,6 @@ pcibios_update_irq(struct pci_dev *dev, int irq) /* XXX FIXME - update OF device tree node interrupt property */ } -#ifdef CONFIG_PPC_MERGE -/* XXX This is a copy of the ppc64 version. This is temporary until we start - * merging the 2 PCI layers - */ -/* - * Reads the interrupt pin to determine if interrupt is use by card. - * If the interrupt is used, then gets the interrupt line from the - * openfirmware and sets it in the pci_dev and pci_config line. - */ -int pci_read_irq_line(struct pci_dev *pci_dev) -{ - struct of_irq oirq; - unsigned int virq; - - DBG("Try to map irq for %s...\n", pci_name(pci_dev)); - - /* Try to get a mapping from the device-tree */ - if (of_irq_map_pci(pci_dev, &oirq)) { - u8 line, pin; - - /* If that fails, lets fallback to what is in the config - * space and map that through the default controller. We - * also set the type to level low since that's what PCI - * interrupts are. If your platform does differently, then - * either provide a proper interrupt tree or don't use this - * function. - */ - if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) - return -1; - if (pin == 0) - return -1; - if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || - line == 0xff) { - return -1; - } - DBG(" -> no map ! Using irq line %d from PCI config\n", line); - - virq = irq_create_mapping(NULL, line); - if (virq != NO_IRQ) - set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); - } else { - DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", - oirq.size, oirq.specifier[0], oirq.controller->full_name); - - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - } - if(virq == NO_IRQ) { - DBG(" -> failed to map !\n"); - return -1; - } - pci_dev->irq = virq; - - return 0; -} -EXPORT_SYMBOL(pci_read_irq_line); -#endif /* CONFIG_PPC_MERGE */ - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; @@ -1497,281 +1332,17 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return 0; } -struct pci_controller* +static struct pci_controller* pci_bus_to_hose(int bus) { - struct pci_controller* hose = hose_head; + struct pci_controller *hose, *tmp; - for (; hose; hose = hose->next) + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) if (bus >= hose->first_busno && bus <= hose->last_busno) return hose; return NULL; } -void __iomem * -pci_bus_io_base(unsigned int bus) -{ - struct pci_controller *hose; - - hose = pci_bus_to_hose(bus); - if (!hose) - return NULL; - return hose->io_base_virt; -} - -unsigned long -pci_bus_io_base_phys(unsigned int bus) -{ - struct pci_controller *hose; - - hose = pci_bus_to_hose(bus); - if (!hose) - return 0; - return hose->io_base_phys; -} - -unsigned long -pci_bus_mem_base_phys(unsigned int bus) -{ - struct pci_controller *hose; - - hose = pci_bus_to_hose(bus); - if (!hose) - return 0; - return hose->pci_mem_offset; -} - -unsigned long -pci_resource_to_bus(struct pci_dev *pdev, struct resource *res) -{ - /* Hack alert again ! See comments in chrp_pci.c - */ - struct pci_controller* hose = - (struct pci_controller *)pdev->sysdata; - if (hose && res->flags & IORESOURCE_MEM) - return res->start - hose->pci_mem_offset; - /* We may want to do something with IOs here... */ - return res->start; -} - - -static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, - resource_size_t *offset, - enum pci_mmap_state mmap_state) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - unsigned long io_offset = 0; - int i, res_bit; - - if (hose == 0) - return NULL; /* should never happen */ - - /* If memory, add on the PCI bridge address offset */ - if (mmap_state == pci_mmap_mem) { -#if 0 /* See comment in pci_resource_to_user() for why this is disabled */ - *offset += hose->pci_mem_offset; -#endif - res_bit = IORESOURCE_MEM; - } else { - io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE; - *offset += io_offset; - res_bit = IORESOURCE_IO; - } - - /* - * Check that the offset requested corresponds to one of the - * resources of the device. - */ - for (i = 0; i <= PCI_ROM_RESOURCE; i++) { - struct resource *rp = &dev->resource[i]; - int flags = rp->flags; - - /* treat ROM as memory (should be already) */ - if (i == PCI_ROM_RESOURCE) - flags |= IORESOURCE_MEM; - - /* Active and same type? */ - if ((flags & res_bit) == 0) - continue; - - /* In the range of this resource? */ - if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) - continue; - - /* found it! construct the final physical address */ - if (mmap_state == pci_mmap_io) - *offset += hose->io_base_phys - io_offset; - return rp; - } - - return NULL; -} - -/* - * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci - * device mapping. - */ -static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, - pgprot_t protection, - enum pci_mmap_state mmap_state, - int write_combine) -{ - unsigned long prot = pgprot_val(protection); - - /* Write combine is always 0 on non-memory space mappings. On - * memory space, if the user didn't pass 1, we check for a - * "prefetchable" resource. This is a bit hackish, but we use - * this to workaround the inability of /sysfs to provide a write - * combine bit - */ - if (mmap_state != pci_mmap_mem) - write_combine = 0; - else if (write_combine == 0) { - if (rp->flags & IORESOURCE_PREFETCH) - write_combine = 1; - } - - /* XXX would be nice to have a way to ask for write-through */ - prot |= _PAGE_NO_CACHE; - if (write_combine) - prot &= ~_PAGE_GUARDED; - else - prot |= _PAGE_GUARDED; - - return __pgprot(prot); -} - -/* - * This one is used by /dev/mem and fbdev who have no clue about the - * PCI device, it tries to find the PCI device first and calls the - * above routine - */ -pgprot_t pci_phys_mem_access_prot(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t protection) -{ - struct pci_dev *pdev = NULL; - struct resource *found = NULL; - unsigned long prot = pgprot_val(protection); - unsigned long offset = pfn << PAGE_SHIFT; - int i; - - if (page_is_ram(pfn)) - return __pgprot(prot); - - prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; - - for_each_pci_dev(pdev) { - for (i = 0; i <= PCI_ROM_RESOURCE; i++) { - struct resource *rp = &pdev->resource[i]; - int flags = rp->flags; - - /* Active and same type? */ - if ((flags & IORESOURCE_MEM) == 0) - continue; - /* In the range of this resource? */ - if (offset < (rp->start & PAGE_MASK) || - offset > rp->end) - continue; - found = rp; - break; - } - if (found) - break; - } - if (found) { - if (found->flags & IORESOURCE_PREFETCH) - prot &= ~_PAGE_GUARDED; - pci_dev_put(pdev); - } - - DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); - - return __pgprot(prot); -} - - -/* - * Perform the actual remap of the pages for a PCI device mapping, as - * appropriate for this architecture. The region in the process to map - * is described by vm_start and vm_end members of VMA, the base physical - * address is found in vm_pgoff. - * The pci device structure is provided so that architectures may make mapping - * decisions on a per-device or per-bus basis. - * - * Returns a negative error code on failure, zero on success. - */ -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, - int write_combine) -{ - resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT; - struct resource *rp; - int ret; - - rp = __pci_mmap_make_offset(dev, &offset, mmap_state); - if (rp == NULL) - return -EINVAL; - - vma->vm_pgoff = offset >> PAGE_SHIFT; - vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, - vma->vm_page_prot, - mmap_state, write_combine); - - ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, vma->vm_page_prot); - - return ret; -} - -/* Obsolete functions. Should be removed once the symbios driver - * is fixed - */ -unsigned long -phys_to_bus(unsigned long pa) -{ - struct pci_controller *hose; - int i; - - for (hose = hose_head; hose; hose = hose->next) { - for (i = 0; i < 3; ++i) { - if (pa >= hose->mem_resources[i].start - && pa <= hose->mem_resources[i].end) { - /* - * XXX the hose->pci_mem_offset really - * only applies to mem_resources[0]. - * We need a way to store an offset for - * the others. -- paulus - */ - if (i == 0) - pa -= hose->pci_mem_offset; - return pa; - } - } - } - /* hmmm, didn't find it */ - return 0; -} - -unsigned long -pci_phys_to_bus(unsigned long pa, int busnr) -{ - struct pci_controller* hose = pci_bus_to_hose(busnr); - if (!hose) - return pa; - return pa - hose->pci_mem_offset; -} - -unsigned long -pci_bus_to_phys(unsigned int ba, int busnr) -{ - struct pci_controller* hose = pci_bus_to_hose(busnr); - if (!hose) - return ba; - return ba + hose->pci_mem_offset; -} - /* Provide information on locations of various I/O regions in physical * memory. Do this on a per-card basis so that we choose the right * root bridge. @@ -1814,62 +1385,11 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } -void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - resource_size_t offset = 0; - - if (hose == NULL) - return; - - if (rsrc->flags & IORESOURCE_IO) - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - - /* We pass a fully fixed up address to userland for MMIO instead of - * a BAR value because X is lame and expects to be able to use that - * to pass to /dev/mem ! - * - * That means that we'll have potentially 64 bits values where some - * userland apps only expect 32 (like X itself since it thinks only - * Sparc has 64 bits MMIO) but if we don't do that, we break it on - * 32 bits CHRPs :-( - * - * Hopefully, the sysfs insterface is immune to that gunk. Once X - * has been fixed (and the fix spread enough), we can re-enable the - * 2 lines below and pass down a BAR value to userland. In that case - * we'll also have to re-enable the matching code in - * __pci_mmap_make_offset(). - * - * BenH. - */ -#if 0 - else if (rsrc->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; -#endif - - *start = rsrc->start - offset; - *end = rsrc->end - offset; -} - -void __init pci_init_resource(struct resource *res, resource_size_t start, - resource_size_t end, int flags, char *name) -{ - res->start = start; - res->end = end; - res->flags = flags; - res->name = name; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; -} - unsigned long pci_address_to_pio(phys_addr_t address) { - struct pci_controller* hose = hose_head; + struct pci_controller *hose, *tmp; - for (; hose; hose = hose->next) { + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { unsigned int size = hose->io_resource.end - hose->io_resource.start + 1; if (address >= hose->io_base_phys && |