diff options
Diffstat (limited to 'arch/powerpc/kernel')
42 files changed, 6955 insertions, 1475 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 71901fbda4a5..b73396b93905 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -4,6 +4,8 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifeq ($(CONFIG_PPC64),y) CFLAGS_prom_init.o += -mno-minimal-toc endif @@ -36,7 +38,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ firmware.o nvram_64.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o obj-$(CONFIG_PPC64) += vdso64/ -obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o +obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o obj-$(CONFIG_PPC_CLOCK) += clock.o @@ -82,6 +84,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ @@ -94,6 +97,10 @@ obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o +obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ + power5+-pmu.o power6-pmu.o power7-pmu.o +obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o @@ -102,12 +109,14 @@ obj-y += iomap.o endif obj-$(CONFIG_PPC64) += $(obj64-y) +obj-$(CONFIG_PPC32) += $(obj32-y) ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),) obj-y += ppc_save_regs.o endif extra-$(CONFIG_PPC_FPU) += fpu.o +extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o extra-y += systbl_chk.i @@ -120,6 +129,7 @@ PHONY += systbl_chk systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i $(call cmd,systbl_chk) +ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y) $(obj)/built-in.o: prom_init_check quiet_cmd_prom_init_check = CALL $< @@ -128,5 +138,6 @@ quiet_cmd_prom_init_check = CALL $< PHONY += prom_init_check prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o $(call cmd,prom_init_check) +endif clean-files := vmlinux.lds diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 5ffcfaa77d6a..a5b632e52fae 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -24,6 +24,7 @@ #include <asm/system.h> #include <asm/cache.h> #include <asm/cputable.h> +#include <asm/emulated_ops.h> struct aligninfo { unsigned char len; @@ -730,8 +731,10 @@ int fix_alignment(struct pt_regs *regs) areg = dsisr & 0x1f; /* register to update */ #ifdef CONFIG_SPE - if ((instr >> 26) == 0x4) + if ((instr >> 26) == 0x4) { + PPC_WARN_EMULATED(spe); return emulate_spe(regs, reg, instr); + } #endif instr = (dsisr >> 10) & 0x7f; @@ -783,23 +786,28 @@ int fix_alignment(struct pt_regs *regs) flags |= SPLT; nb = 8; } + PPC_WARN_EMULATED(vsx); return emulate_vsx(addr, reg, areg, regs, flags, nb); } #endif /* A size of 0 indicates an instruction we don't support, with * the exception of DCBZ which is handled as a special case here */ - if (instr == DCBZ) + if (instr == DCBZ) { + PPC_WARN_EMULATED(dcbz); return emulate_dcbz(regs, addr); + } if (unlikely(nb == 0)) return 0; /* Load/Store Multiple instructions are handled in their own * function */ - if (flags & M) + if (flags & M) { + PPC_WARN_EMULATED(multiple); return emulate_multiple(regs, addr, reg, nb, flags, instr, swiz); + } /* Verify the address of the operand */ if (unlikely(user_mode(regs) && @@ -816,8 +824,12 @@ int fix_alignment(struct pt_regs *regs) } /* Special case for 16-byte FP loads and stores */ - if (nb == 16) + if (nb == 16) { + PPC_WARN_EMULATED(fp_pair); return emulate_fp_pair(addr, reg, flags); + } + + PPC_WARN_EMULATED(unaligned); /* If we are loading, get the data from user space, else * get it from register values diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 1e40bc053946..561b64652311 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -122,8 +122,6 @@ int main(void) DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack)); DEFINE(PACACURRENT, offsetof(struct paca_struct, __current)); DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr)); - DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); - DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr)); DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1)); DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc)); @@ -131,35 +129,31 @@ int main(void) DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr)); DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled)); DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled)); - DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); - DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); + DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); - DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp)); #ifdef CONFIG_PPC_MM_SLICES DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct, context.low_slices_psize)); DEFINE(PACAHIGHSLICEPSIZE, offsetof(struct paca_struct, context.high_slices_psize)); DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def)); +#endif /* CONFIG_PPC_MM_SLICES */ +#ifdef CONFIG_PPC_STD_MMU_64 + DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); + DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); + DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); + DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); + DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp)); +#ifdef CONFIG_PPC_MM_SLICES DEFINE(MMUPSIZESLLP, offsetof(struct mmu_psize_def, sllp)); #else DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp)); - #endif /* CONFIG_PPC_MM_SLICES */ DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb)); - DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); DEFINE(PACALPPACAPTR, offsetof(struct paca_struct, lppaca_ptr)); - DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); - DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr)); - DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr)); - DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); - DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr)); - DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset)); - DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); - DEFINE(SLBSHADOW_STACKVSID, offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid)); DEFINE(SLBSHADOW_STACKESID, @@ -169,6 +163,15 @@ int main(void) DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area)); +#endif /* CONFIG_PPC_STD_MMU_64 */ + DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); + DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); + DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr)); + DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr)); + DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); + DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); + DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset)); + DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); #endif /* CONFIG_PPC64 */ /* RTAS */ diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 54f767e31a1a..1e9949e68856 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -239,6 +239,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR) ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE ori r11,r11,HID0_LRSTK | HID0_BTIC oris r11,r11,HID0_DPM@h +BEGIN_MMU_FTR_SECTION + oris r11,r11,HID0_HIGH_BAT@h +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) BEGIN_FTR_SECTION xori r11,r11,HID0_BTIC END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index eb4b9adcedb4..0adb50ad8031 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -17,6 +17,40 @@ #include <asm/cputable.h> #include <asm/ppc_asm.h> +_GLOBAL(__e500_icache_setup) + mfspr r0, SPRN_L1CSR1 + andi. r3, r0, L1CSR1_ICE + bnelr /* Already enabled */ + oris r0, r0, L1CSR1_CPE@h + ori r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR | L1CSR1_ICE) + mtspr SPRN_L1CSR1, r0 /* Enable I-Cache */ + isync + blr + +_GLOBAL(__e500_dcache_setup) + mfspr r0, SPRN_L1CSR0 + andi. r3, r0, L1CSR0_DCE + bnelr /* Already enabled */ + msync + isync + li r0, 0 + mtspr SPRN_L1CSR0, r0 /* Disable */ + msync + isync + li r0, (L1CSR0_DCFI | L1CSR0_CLFC) + mtspr SPRN_L1CSR0, r0 /* Invalidate */ + isync +1: mfspr r0, SPRN_L1CSR0 + andi. r3, r0, L1CSR0_CLFC + bne+ 1b /* Wait for lock bits reset */ + oris r0, r0, L1CSR0_CPE@h + ori r0, r0, L1CSR0_DCE + msync + isync + mtspr SPRN_L1CSR0, r0 /* Enable */ + isync + blr + _GLOBAL(__setup_cpu_e200) /* enable dedicated debug exception handling resources (Debug APU) */ mfspr r3,SPRN_HID0 @@ -25,7 +59,16 @@ _GLOBAL(__setup_cpu_e200) b __setup_e200_ivors _GLOBAL(__setup_cpu_e500v1) _GLOBAL(__setup_cpu_e500v2) - b __setup_e500_ivors + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_e500_ivors + mtlr r4 + blr _GLOBAL(__setup_cpu_e500mc) - b __setup_e500mc_ivors - + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_e500mc_ivors + mtlr r4 + blr diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 3e33fb933d99..4a24a2fc4574 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -427,7 +427,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "POWER7 (architected)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, - .mmu_features = MMU_FTR_HPTE_TABLE, + .mmu_features = MMU_FTR_HPTE_TABLE | + MMU_FTR_TLBIE_206, .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, @@ -441,7 +442,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "POWER7 (raw)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, - .mmu_features = MMU_FTR_HPTE_TABLE, + .mmu_features = MMU_FTR_HPTE_TABLE | + MMU_FTR_TLBIE_206, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c new file mode 100644 index 000000000000..68ccf11e4f19 --- /dev/null +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -0,0 +1,163 @@ +/* + * Contains routines needed to support swiotlb for ppc. + * + * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/dma-mapping.h> +#include <linux/pfn.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pci.h> + +#include <asm/machdep.h> +#include <asm/swiotlb.h> +#include <asm/dma.h> +#include <asm/abs_addr.h> + +int swiotlb __read_mostly; +unsigned int ppc_swiotlb_enable; + +void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr) +{ + unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr)); + void *pageaddr = page_address(pfn_to_page(pfn)); + + if (pageaddr != NULL) + return pageaddr + (addr % PAGE_SIZE); + return NULL; +} + +dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr) +{ + return paddr + get_dma_direct_offset(hwdev); +} + +phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr) + +{ + return baddr - get_dma_direct_offset(hwdev); +} + +/* + * Determine if an address needs bounce buffering via swiotlb. + * Going forward I expect the swiotlb code to generalize on using + * a dma_ops->addr_needs_map, and this function will move from here to the + * generic swiotlb code. + */ +int +swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr, + size_t size) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev); + + BUG_ON(!dma_ops); + return dma_ops->addr_needs_map(hwdev, addr, size); +} + +/* + * Determine if an address is reachable by a pci device, or if we must bounce. + */ +static int +swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) +{ + u64 mask = dma_get_mask(hwdev); + dma_addr_t max; + struct pci_controller *hose; + struct pci_dev *pdev = to_pci_dev(hwdev); + + hose = pci_bus_to_host(pdev->bus); + max = hose->dma_window_base_cur + hose->dma_window_size; + + /* check that we're within mapped pci window space */ + if ((addr + size > max) | (addr < hose->dma_window_base_cur)) + return 1; + + return !is_buffer_dma_capable(mask, addr, size); +} + +static int +swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) +{ + return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size); +} + + +/* + * At the moment, all platforms that use this code only require + * swiotlb to be used if we're operating on HIGHMEM. Since + * we don't ever call anything other than map_sg, unmap_sg, + * map_page, and unmap_page on highmem, use normal dma_ops + * for everything else. + */ +struct dma_mapping_ops swiotlb_dma_ops = { + .alloc_coherent = dma_direct_alloc_coherent, + .free_coherent = dma_direct_free_coherent, + .map_sg = swiotlb_map_sg_attrs, + .unmap_sg = swiotlb_unmap_sg_attrs, + .dma_supported = swiotlb_dma_supported, + .map_page = swiotlb_map_page, + .unmap_page = swiotlb_unmap_page, + .addr_needs_map = swiotlb_addr_needs_map, + .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, + .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device +}; + +struct dma_mapping_ops swiotlb_pci_dma_ops = { + .alloc_coherent = dma_direct_alloc_coherent, + .free_coherent = dma_direct_free_coherent, + .map_sg = swiotlb_map_sg_attrs, + .unmap_sg = swiotlb_unmap_sg_attrs, + .dma_supported = swiotlb_dma_supported, + .map_page = swiotlb_map_page, + .unmap_page = swiotlb_unmap_page, + .addr_needs_map = swiotlb_pci_addr_needs_map, + .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, + .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device +}; + +static int ppc_swiotlb_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + + /* We are only intereted in device addition */ + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + /* May need to bounce if the device can't address all of DRAM */ + if (dma_get_mask(dev) < lmb_end_of_DRAM()) + set_dma_ops(dev, &swiotlb_dma_ops); + + return NOTIFY_DONE; +} + +static struct notifier_block ppc_swiotlb_plat_bus_notifier = { + .notifier_call = ppc_swiotlb_bus_notify, + .priority = 0, +}; + +static struct notifier_block ppc_swiotlb_of_bus_notifier = { + .notifier_call = ppc_swiotlb_bus_notify, + .priority = 0, +}; + +int __init swiotlb_setup_bus_notifier(void) +{ + bus_register_notifier(&platform_bus_type, + &ppc_swiotlb_plat_bus_notifier); + bus_register_notifier(&of_platform_bus_type, + &ppc_swiotlb_of_bus_notifier); + + return 0; +} diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 6b02793dc75b..20a60d661ba8 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -19,7 +19,7 @@ * default the offset is PCI_DRAM_OFFSET. */ -static unsigned long get_dma_direct_offset(struct device *dev) +unsigned long get_dma_direct_offset(struct device *dev) { if (dev) return (unsigned long)dev->archdata.dma_data; diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index abfc32330479..43e073477c34 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -526,6 +526,15 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) 2: TRACE_AND_RESTORE_IRQ(r5); +#ifdef CONFIG_PERF_COUNTERS + /* check paca->perf_counter_pending if we're enabling ints */ + lbz r3,PACAPERFPEND(r13) + and. r3,r3,r5 + beq 27f + bl .perf_counter_do_pending +27: +#endif /* CONFIG_PERF_COUNTERS */ + /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S new file mode 100644 index 000000000000..eb898112e577 --- /dev/null +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -0,0 +1,978 @@ +/* + * This file contains the 64-bit "server" PowerPC variant + * of the low level exception handling including exception + * vectors, exception return, part of the slb and stab + * handling and other fixed offset specific things. + * + * This file is meant to be #included from head_64.S due to + * position dependant assembly. + * + * Most of this originates from head_64.S and thus has the same + * copyright history. + * + */ + +/* + * We layout physical memory as follows: + * 0x0000 - 0x00ff : Secondary processor spin code + * 0x0100 - 0x2fff : pSeries Interrupt prologs + * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs + * 0x6000 - 0x6fff : Initial (CPU0) segment table + * 0x7000 - 0x7fff : FWNMI data area + * 0x8000 - : Early init and support code + */ + + +/* + * SPRG Usage + * + * Register Definition + * + * SPRG0 reserved for hypervisor + * SPRG1 temp - used to save gpr + * SPRG2 temp - used to save gpr + * SPRG3 virt addr of paca + */ + +/* + * This is the start of the interrupt handlers for pSeries + * This code runs with relocation off. + * Code from here to __end_interrupts gets copied down to real + * address 0x100 when we are running a relocatable kernel. + * Therefore any relative branches in this section must only + * branch to labels in this section. + */ + . = 0x100 + .globl __start_interrupts +__start_interrupts: + + STD_EXCEPTION_PSERIES(0x100, system_reset) + + . = 0x200 +_machine_check_pSeries: + HMT_MEDIUM + mtspr SPRN_SPRG1,r13 /* save r13 */ + EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) + + . = 0x300 + .globl data_access_pSeries +data_access_pSeries: + HMT_MEDIUM + mtspr SPRN_SPRG1,r13 +BEGIN_FTR_SECTION + mtspr SPRN_SPRG2,r12 + mfspr r13,SPRN_DAR + mfspr r12,SPRN_DSISR + srdi r13,r13,60 + rlwimi r13,r12,16,0x20 + mfcr r12 + cmpwi r13,0x2c + beq do_stab_bolted_pSeries + mtcrf 0x80,r12 + mfspr r12,SPRN_SPRG2 +END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) + + . = 0x380 + .globl data_access_slb_pSeries +data_access_slb_pSeries: + HMT_MEDIUM + mtspr SPRN_SPRG1,r13 + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_DAR + std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ + mfcr r9 +#ifdef __DISABLED__ + /* Keep that around for when we re-implement dynamic VSIDs */ + cmpdi r3,0 + bge slb_miss_user_pseries +#endif /* __DISABLED__ */ + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + mfspr r12,SPRN_SRR1 /* and SRR1 */ +#ifndef CONFIG_RELOCATABLE + b .slb_miss_realmode +#else + /* + * We can't just use a direct branch to .slb_miss_realmode + * because the distance from here to there depends on where + * the kernel ends up being put. + */ + mfctr r11 + ld r10,PACAKBASE(r13) + LOAD_HANDLER(r10, .slb_miss_realmode) + mtctr r10 + bctr +#endif + + STD_EXCEPTION_PSERIES(0x400, instruction_access) + + . = 0x480 + .globl instruction_access_slb_pSeries +instruction_access_slb_pSeries: + HMT_MEDIUM + mtspr SPRN_SPRG1,r13 + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ + std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ + mfcr r9 +#ifdef __DISABLED__ + /* Keep that around for when we re-implement dynamic VSIDs */ + cmpdi r3,0 + bge slb_miss_user_pseries +#endif /* __DISABLED__ */ + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + mfspr r12,SPRN_SRR1 /* and SRR1 */ +#ifndef CONFIG_RELOCATABLE + b .slb_miss_realmode +#else + mfctr r11 + ld r10,PACAKBASE(r13) + LOAD_HANDLER(r10, .slb_miss_realmode) + mtctr r10 + bctr +#endif + + MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt) + STD_EXCEPTION_PSERIES(0x600, alignment) + STD_EXCEPTION_PSERIES(0x700, program_check) + STD_EXCEPTION_PSERIES(0x800, fp_unavailable) + MASKABLE_EXCEPTION_PSERIES(0x900, decrementer) + STD_EXCEPTION_PSERIES(0xa00, trap_0a) + STD_EXCEPTION_PSERIES(0xb00, trap_0b) + + . = 0xc00 + .globl system_call_pSeries +system_call_pSeries: + HMT_MEDIUM +BEGIN_FTR_SECTION + cmpdi r0,0x1ebe + beq- 1f +END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) + mr r9,r13 + mfspr r13,SPRN_SPRG3 + mfspr r11,SPRN_SRR0 + ld r12,PACAKBASE(r13) + ld r10,PACAKMSR(r13) + LOAD_HANDLER(r12, system_call_entry) + mtspr SPRN_SRR0,r12 + mfspr r12,SPRN_SRR1 + mtspr SPRN_SRR1,r10 + rfid + b . /* prevent speculative execution */ + +/* Fast LE/BE switch system call */ +1: mfspr r12,SPRN_SRR1 + xori r12,r12,MSR_LE + mtspr SPRN_SRR1,r12 + rfid /* return to userspace */ + b . + + STD_EXCEPTION_PSERIES(0xd00, single_step) + STD_EXCEPTION_PSERIES(0xe00, trap_0e) + + /* We need to deal with the Altivec unavailable exception + * here which is at 0xf20, thus in the middle of the + * prolog code of the PerformanceMonitor one. A little + * trickery is thus necessary + */ + . = 0xf00 + b performance_monitor_pSeries + + . = 0xf20 + b altivec_unavailable_pSeries + + . = 0xf40 + b vsx_unavailable_pSeries + +#ifdef CONFIG_CBE_RAS + HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error) +#endif /* CONFIG_CBE_RAS */ + STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) +#ifdef CONFIG_CBE_RAS + HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance) +#endif /* CONFIG_CBE_RAS */ + STD_EXCEPTION_PSERIES(0x1700, altivec_assist) +#ifdef CONFIG_CBE_RAS + HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal) +#endif /* CONFIG_CBE_RAS */ + + . = 0x3000 + +/*** pSeries interrupt support ***/ + + /* moved from 0xf00 */ + STD_EXCEPTION_PSERIES(., performance_monitor) + STD_EXCEPTION_PSERIES(., altivec_unavailable) + STD_EXCEPTION_PSERIES(., vsx_unavailable) + +/* + * An interrupt came in while soft-disabled; clear EE in SRR1, + * clear paca->hard_enabled and return. + */ +masked_interrupt: + stb r10,PACAHARDIRQEN(r13) + mtcrf 0x80,r9 + ld r9,PACA_EXGEN+EX_R9(r13) + mfspr r10,SPRN_SRR1 + rldicl r10,r10,48,1 /* clear MSR_EE */ + rotldi r10,r10,16 + mtspr SPRN_SRR1,r10 + ld r10,PACA_EXGEN+EX_R10(r13) + mfspr r13,SPRN_SPRG1 + rfid + b . + + .align 7 +do_stab_bolted_pSeries: + mtcrf 0x80,r12 + mfspr r12,SPRN_SPRG2 + EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) + +#ifdef CONFIG_PPC_PSERIES +/* + * Vectors for the FWNMI option. Share common code. + */ + .globl system_reset_fwnmi + .align 7 +system_reset_fwnmi: + HMT_MEDIUM + mtspr SPRN_SPRG1,r13 /* save r13 */ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) + + .globl machine_check_fwnmi + .align 7 +machine_check_fwnmi: + HMT_MEDIUM + mtspr SPRN_SPRG1,r13 /* save r13 */ + EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) + +#endif /* CONFIG_PPC_PSERIES */ + +#ifdef __DISABLED__ +/* + * This is used for when the SLB miss handler has to go virtual, + * which doesn't happen for now anymore but will once we re-implement + * dynamic VSIDs for shared page tables + */ +slb_miss_user_pseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + clrrdi r12,r13,32 + mfmsr r10 + mfspr r11,SRR0 /* save SRR0 */ + ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI + mtspr SRR0,r12 + mfspr r12,SRR1 /* and SRR1 */ + mtspr SRR1,r10 + rfid + b . /* prevent spec. execution */ +#endif /* __DISABLED__ */ + + .align 7 + .globl __end_interrupts +__end_interrupts: + +/* + * Code from here down to __end_handlers is invoked from the + * exception prologs above. Because the prologs assemble the + * addresses of these handlers using the LOAD_HANDLER macro, + * which uses an addi instruction, these handlers must be in + * the first 32k of the kernel image. + */ + +/*** Common interrupt handlers ***/ + + STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) + + /* + * Machine check is different because we use a different + * save area: PACA_EXMC instead of PACA_EXGEN. + */ + .align 7 + .globl machine_check_common +machine_check_common: + EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) + FINISH_NAP + DISABLE_INTS + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .machine_check_exception + b .ret_from_except + + STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) + STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) + STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) + STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) + STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception) + STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) +#ifdef CONFIG_ALTIVEC + STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) +#else + STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) +#endif +#ifdef CONFIG_CBE_RAS + STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception) + STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception) + STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception) +#endif /* CONFIG_CBE_RAS */ + + .align 7 +system_call_entry: + b system_call_common + +/* + * Here we have detected that the kernel stack pointer is bad. + * R9 contains the saved CR, r13 points to the paca, + * r10 contains the (bad) kernel stack pointer, + * r11 and r12 contain the saved SRR0 and SRR1. + * We switch to using an emergency stack, save the registers there, + * and call kernel_bad_stack(), which panics. + */ +bad_stack: + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r9,_CCR(r1) + std r10,GPR1(r1) + std r11,_NIP(r1) + std r12,_MSR(r1) + mfspr r11,SPRN_DAR + mfspr r12,SPRN_DSISR + std r11,_DAR(r1) + std r12,_DSISR(r1) + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_GPR(0,r1) + SAVE_GPR(2,r1) + SAVE_4GPRS(3,r1) + SAVE_2GPRS(7,r1) + SAVE_10GPRS(12,r1) + SAVE_10GPRS(22,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .kernel_bad_stack + b 1b + +/* + * Here r13 points to the paca, r9 contains the saved CR, + * SRR0 and SRR1 are saved in r11 and r12, + * r9 - r13 are saved in paca->exgen. + */ + .align 7 + .globl data_access_common +data_access_common: + mfspr r10,SPRN_DAR + std r10,PACA_EXGEN+EX_DAR(r13) + mfspr r10,SPRN_DSISR + stw r10,PACA_EXGEN+EX_DSISR(r13) + EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) + ld r3,PACA_EXGEN+EX_DAR(r13) + lwz r4,PACA_EXGEN+EX_DSISR(r13) + li r5,0x300 + b .do_hash_page /* Try to handle as hpte fault */ + + .align 7 + .globl instruction_access_common +instruction_access_common: + EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) + ld r3,_NIP(r1) + andis. r4,r12,0x5820 + li r5,0x400 + b .do_hash_page /* Try to handle as hpte fault */ + +/* + * Here is the common SLB miss user that is used when going to virtual + * mode for SLB misses, that is currently not used + */ +#ifdef __DISABLED__ + .align 7 + .globl slb_miss_user_common +slb_miss_user_common: + mflr r10 + std r3,PACA_EXGEN+EX_DAR(r13) + stw r9,PACA_EXGEN+EX_CCR(r13) + std r10,PACA_EXGEN+EX_LR(r13) + std r11,PACA_EXGEN+EX_SRR0(r13) + bl .slb_allocate_user + + ld r10,PACA_EXGEN+EX_LR(r13) + ld r3,PACA_EXGEN+EX_R3(r13) + lwz r9,PACA_EXGEN+EX_CCR(r13) + ld r11,PACA_EXGEN+EX_SRR0(r13) + mtlr r10 + beq- slb_miss_fault + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- unrecov_user_slb + mfmsr r10 + +.machine push +.machine "power4" + mtcrf 0x80,r9 +.machine pop + + clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ + mtmsrd r10,1 + + mtspr SRR0,r11 + mtspr SRR1,r12 + + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + rfid + b . + +slb_miss_fault: + EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) + ld r4,PACA_EXGEN+EX_DAR(r13) + li r5,0 + std r4,_DAR(r1) + std r5,_DSISR(r1) + b handle_page_fault + +unrecov_user_slb: + EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + +#endif /* __DISABLED__ */ + + +/* + * r13 points to the PACA, r9 contains the saved CR, + * r12 contain the saved SRR1, SRR0 is still ready for return + * r3 has the faulting address + * r9 - r13 are saved in paca->exslb. + * r3 is saved in paca->slb_r3 + * We assume we aren't going to take any exceptions during this procedure. + */ +_GLOBAL(slb_miss_realmode) + mflr r10 +#ifdef CONFIG_RELOCATABLE + mtctr r11 +#endif + + stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ + std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ + + bl .slb_allocate_realmode + + /* All done -- return from exception. */ + + ld r10,PACA_EXSLB+EX_LR(r13) + ld r3,PACA_EXSLB+EX_R3(r13) + lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION + ld r11,PACALPPACAPTR(r13) + ld r11,LPPACASRR0(r11) /* get SRR0 value */ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif /* CONFIG_PPC_ISERIES */ + + mtlr r10 + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- 2f + +.machine push +.machine "power4" + mtcrf 0x80,r9 + mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ +.machine pop + +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif /* CONFIG_PPC_ISERIES */ + ld r9,PACA_EXSLB+EX_R9(r13) + ld r10,PACA_EXSLB+EX_R10(r13) + ld r11,PACA_EXSLB+EX_R11(r13) + ld r12,PACA_EXSLB+EX_R12(r13) + ld r13,PACA_EXSLB+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +2: +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION + b unrecov_slb +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif /* CONFIG_PPC_ISERIES */ + mfspr r11,SPRN_SRR0 + ld r10,PACAKBASE(r13) + LOAD_HANDLER(r10,unrecov_slb) + mtspr SPRN_SRR0,r10 + ld r10,PACAKMSR(r13) + mtspr SPRN_SRR1,r10 + rfid + b . + +unrecov_slb: + EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + + .align 7 + .globl hardware_interrupt_common + .globl hardware_interrupt_entry +hardware_interrupt_common: + EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) + FINISH_NAP +hardware_interrupt_entry: + DISABLE_INTS +BEGIN_FTR_SECTION + bl .ppc64_runlatch_on +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_IRQ + b .ret_from_except_lite + +#ifdef CONFIG_PPC_970_NAP +power4_fixup_nap: + andc r9,r9,r10 + std r9,TI_LOCAL_FLAGS(r11) + ld r10,_LINK(r1) /* make idle task do the */ + std r10,_NIP(r1) /* equivalent of a blr */ + blr +#endif + + .align 7 + .globl alignment_common +alignment_common: + mfspr r10,SPRN_DAR + std r10,PACA_EXGEN+EX_DAR(r13) + mfspr r10,SPRN_DSISR + stw r10,PACA_EXGEN+EX_DSISR(r13) + EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) + ld r3,PACA_EXGEN+EX_DAR(r13) + lwz r4,PACA_EXGEN+EX_DSISR(r13) + std r3,_DAR(r1) + std r4,_DSISR(r1) + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + ENABLE_INTS + bl .alignment_exception + b .ret_from_except + + .align 7 + .globl program_check_common +program_check_common: + EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + ENABLE_INTS + bl .program_check_exception + b .ret_from_except + + .align 7 + .globl fp_unavailable_common +fp_unavailable_common: + EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) + bne 1f /* if from user, just load it up */ + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + ENABLE_INTS + bl .kernel_fp_unavailable_exception + BUG_OPCODE +1: bl .load_up_fpu + b fast_exception_return + + .align 7 + .globl altivec_unavailable_common +altivec_unavailable_common: + EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + beq 1f + bl .load_up_altivec + b fast_exception_return +1: +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + ENABLE_INTS + bl .altivec_unavailable_exception + b .ret_from_except + + .align 7 + .globl vsx_unavailable_common +vsx_unavailable_common: + EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + bne .load_up_vsx +1: +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + ENABLE_INTS + bl .vsx_unavailable_exception + b .ret_from_except + + .align 7 + .globl __end_handlers +__end_handlers: + +/* + * Return from an exception with minimal checks. + * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. + * If interrupts have been enabled, or anything has been + * done that might have changed the scheduling status of + * any task or sent any task a signal, you should use + * ret_from_except or ret_from_except_lite instead of this. + */ +fast_exc_return_irq: /* restores irq state too */ + ld r3,SOFTE(r1) + TRACE_AND_RESTORE_IRQ(r3); + ld r12,_MSR(r1) + rldicl r4,r12,49,63 /* get MSR_EE to LSB */ + stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ + b 1f + + .globl fast_exception_return +fast_exception_return: + ld r12,_MSR(r1) +1: ld r11,_NIP(r1) + andi. r3,r12,MSR_RI /* check if RI is set */ + beq- unrecov_fer + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + andi. r3,r12,MSR_PR + beq 2f + ACCOUNT_CPU_USER_EXIT(r3, r4) +2: +#endif + + ld r3,_CCR(r1) + ld r4,_LINK(r1) + ld r5,_CTR(r1) + ld r6,_XER(r1) + mtcr r3 + mtlr r4 + mtctr r5 + mtxer r6 + REST_GPR(0, r1) + REST_8GPRS(2, r1) + + mfmsr r10 + rldicl r10,r10,48,1 /* clear EE */ + rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */ + mtmsrd r10,1 + + mtspr SPRN_SRR1,r12 + mtspr SPRN_SRR0,r11 + REST_4GPRS(10, r1) + ld r1,GPR1(r1) + rfid + b . /* prevent speculative execution */ + +unrecov_fer: + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + + +/* + * Hash table stuff + */ + .align 7 +_STATIC(do_hash_page) + std r3,_DAR(r1) + std r4,_DSISR(r1) + + andis. r0,r4,0xa450 /* weird error? */ + bne- handle_page_fault /* if not, try to insert a HPTE */ +BEGIN_FTR_SECTION + andis. r0,r4,0x0020 /* Is it a segment table fault? */ + bne- do_ste_alloc /* If so handle it */ +END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + + /* + * On iSeries, we soft-disable interrupts here, then + * hard-enable interrupts so that the hash_page code can spin on + * the hash_table_lock without problems on a shared processor. + */ + DISABLE_INTS + + /* + * Currently, trace_hardirqs_off() will be called by DISABLE_INTS + * and will clobber volatile registers when irq tracing is enabled + * so we need to reload them. It may be possible to be smarter here + * and move the irq tracing elsewhere but let's keep it simple for + * now + */ +#ifdef CONFIG_TRACE_IRQFLAGS + ld r3,_DAR(r1) + ld r4,_DSISR(r1) + ld r5,_TRAP(r1) + ld r12,_MSR(r1) + clrrdi r5,r5,4 +#endif /* CONFIG_TRACE_IRQFLAGS */ + /* + * We need to set the _PAGE_USER bit if MSR_PR is set or if we are + * accessing a userspace segment (even from the kernel). We assume + * kernel addresses always have the high bit set. + */ + rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ + rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ + orc r0,r12,r0 /* MSR_PR | ~high_bit */ + rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ + ori r4,r4,1 /* add _PAGE_PRESENT */ + rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ + + /* + * r3 contains the faulting address + * r4 contains the required access permissions + * r5 contains the trap number + * + * at return r3 = 0 for success + */ + bl .hash_page /* build HPTE if possible */ + cmpdi r3,0 /* see if hash_page succeeded */ + +BEGIN_FW_FTR_SECTION + /* + * If we had interrupts soft-enabled at the point where the + * DSI/ISI occurred, and an interrupt came in during hash_page, + * handle it now. + * We jump to ret_from_except_lite rather than fast_exception_return + * because ret_from_except_lite will check for and handle pending + * interrupts if necessary. + */ + beq 13f +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) + +BEGIN_FW_FTR_SECTION + /* + * Here we have interrupts hard-disabled, so it is sufficient + * to restore paca->{soft,hard}_enable and get out. + */ + beq fast_exc_return_irq /* Return from exception on success */ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + + /* For a hash failure, we don't bother re-enabling interrupts */ + ble- 12f + + /* + * hash_page couldn't handle it, set soft interrupt enable back + * to what it was before the trap. Note that .raw_local_irq_restore + * handles any interrupts pending at this point. + */ + ld r3,SOFTE(r1) + TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) + bl .raw_local_irq_restore + b 11f + +/* Here we have a page fault that hash_page can't handle. */ +handle_page_fault: + ENABLE_INTS +11: ld r4,_DAR(r1) + ld r5,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_page_fault + cmpdi r3,0 + beq+ 13f + bl .save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + lwz r4,_DAR(r1) + bl .bad_page_fault + b .ret_from_except + +13: b .ret_from_except_lite + +/* We have a page fault that hash_page could handle but HV refused + * the PTE insertion + */ +12: bl .save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + ld r4,_DAR(r1) + bl .low_hash_fault + b .ret_from_except + + /* here we have a segment miss */ +do_ste_alloc: + bl .ste_allocate /* try to insert stab entry */ + cmpdi r3,0 + bne- handle_page_fault + b fast_exception_return + +/* + * r13 points to the PACA, r9 contains the saved CR, + * r11 and r12 contain the saved SRR0 and SRR1. + * r9 - r13 are saved in paca->exslb. + * We assume we aren't going to take any exceptions during this procedure. + * We assume (DAR >> 60) == 0xc. + */ + .align 7 +_GLOBAL(do_stab_bolted) + stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ + std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ + + /* Hash to the primary group */ + ld r10,PACASTABVIRT(r13) + mfspr r11,SPRN_DAR + srdi r11,r11,28 + rldimi r10,r11,7,52 /* r10 = first ste of the group */ + + /* Calculate VSID */ + /* This is a kernel address, so protovsid = ESID */ + ASM_VSID_SCRAMBLE(r11, r9, 256M) + rldic r9,r11,12,16 /* r9 = vsid << 12 */ + + /* Search the primary group for a free entry */ +1: ld r11,0(r10) /* Test valid bit of the current ste */ + andi. r11,r11,0x80 + beq 2f + addi r10,r10,16 + andi. r11,r10,0x70 + bne 1b + + /* Stick for only searching the primary group for now. */ + /* At least for now, we use a very simple random castout scheme */ + /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ + mftb r11 + rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ + ori r11,r11,0x10 + + /* r10 currently points to an ste one past the group of interest */ + /* make it point to the randomly selected entry */ + subi r10,r10,128 + or r10,r10,r11 /* r10 is the entry to invalidate */ + + isync /* mark the entry invalid */ + ld r11,0(r10) + rldicl r11,r11,56,1 /* clear the valid bit */ + rotldi r11,r11,8 + std r11,0(r10) + sync + + clrrdi r11,r11,28 /* Get the esid part of the ste */ + slbie r11 + +2: std r9,8(r10) /* Store the vsid part of the ste */ + eieio + + mfspr r11,SPRN_DAR /* Get the new esid */ + clrrdi r11,r11,28 /* Permits a full 32b of ESID */ + ori r11,r11,0x90 /* Turn on valid and kp */ + std r11,0(r10) /* Put new entry back into the stab */ + + sync + + /* All done -- return from exception. */ + lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ + ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ + + andi. r10,r12,MSR_RI + beq- unrecov_slb + + mtcrf 0x80,r9 /* restore CR */ + + mfmsr r10 + clrrdi r10,r10,2 + mtmsrd r10,1 + + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 + ld r9,PACA_EXSLB+EX_R9(r13) + ld r10,PACA_EXSLB+EX_R10(r13) + ld r11,PACA_EXSLB+EX_R11(r13) + ld r12,PACA_EXSLB+EX_R12(r13) + ld r13,PACA_EXSLB+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +/* + * Space for CPU0's segment table. + * + * On iSeries, the hypervisor must fill in at least one entry before + * we get control (with relocate on). The address is given to the hv + * as a page number (see xLparMap below), so this must be at a + * fixed address (the linker can't compute (u64)&initial_stab >> + * PAGE_SHIFT). + */ + . = STAB0_OFFSET /* 0x6000 */ + .globl initial_stab +initial_stab: + .space 4096 + +#ifdef CONFIG_PPC_PSERIES +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: +#endif /* CONFIG_PPC_PSERIES */ + + /* iSeries does not use the FWNMI stuff, so it is safe to put + * this here, even if we later allow kernels that will boot on + * both pSeries and iSeries */ +#ifdef CONFIG_PPC_ISERIES + . = LPARMAP_PHYS + .globl xLparMap +xLparMap: + .quad HvEsidsToMap /* xNumberEsids */ + .quad HvRangesToMap /* xNumberRanges */ + .quad STAB0_PAGE /* xSegmentTableOffs */ + .zero 40 /* xRsvd */ + /* xEsids (HvEsidsToMap entries of 2 quads) */ + .quad PAGE_OFFSET_ESID /* xKernelEsid */ + .quad PAGE_OFFSET_VSID /* xKernelVsid */ + .quad VMALLOC_START_ESID /* xKernelEsid */ + .quad VMALLOC_START_VSID /* xKernelVsid */ + /* xRanges (HvRangesToMap entries of 3 quads) */ + .quad HvPagesToMap /* xPages */ + .quad 0 /* xOffset */ + .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ + +#endif /* CONFIG_PPC_ISERIES */ + +#ifdef CONFIG_PPC_PSERIES + . = 0x8000 +#endif /* CONFIG_PPC_PSERIES */ diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 2d182f119d1d..ce1f3e44c24f 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -23,25 +23,14 @@ #include <asm/code-patching.h> #include <asm/ftrace.h> -#ifdef CONFIG_PPC32 -# define GET_ADDR(addr) addr -#else -/* PowerPC64's functions are data that points to the functions */ -# define GET_ADDR(addr) (*(unsigned long *)addr) -#endif #ifdef CONFIG_DYNAMIC_FTRACE -static unsigned int ftrace_nop_replace(void) -{ - return PPC_INST_NOP; -} - static unsigned int ftrace_call_replace(unsigned long ip, unsigned long addr, int link) { unsigned int op; - addr = GET_ADDR(addr); + addr = ppc_function_entry((void *)addr); /* if (link) set op to 'bl' else 'b' */ op = create_branch((unsigned int *)ip, addr, link ? 1 : 0); @@ -49,14 +38,6 @@ ftrace_call_replace(unsigned long ip, unsigned long addr, int link) return op; } -#ifdef CONFIG_PPC64 -# define _ASM_ALIGN " .align 3 " -# define _ASM_PTR " .llong " -#else -# define _ASM_ALIGN " .align 2 " -# define _ASM_PTR " .long " -#endif - static int ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new) { @@ -197,7 +178,7 @@ __ftrace_make_nop(struct module *mod, ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; /* This should match what was called */ - if (ptr != GET_ADDR(addr)) { + if (ptr != ppc_function_entry((void *)addr)) { printk(KERN_ERR "addr does not match %lx\n", ptr); return -EINVAL; } @@ -328,7 +309,7 @@ int ftrace_make_nop(struct module *mod, if (test_24bit_addr(ip, addr)) { /* within range */ old = ftrace_call_replace(ip, addr, 1); - new = ftrace_nop_replace(); + new = PPC_INST_NOP; return ftrace_modify_code(ip, old, new); } @@ -466,7 +447,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) */ if (test_24bit_addr(ip, addr)) { /* within range */ - old = ftrace_nop_replace(); + old = PPC_INST_NOP; new = ftrace_call_replace(ip, addr, 1); return ftrace_modify_code(ip, old, new); } @@ -570,7 +551,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) return_hooker = (unsigned long)&mod_return_to_handler; #endif - return_hooker = GET_ADDR(return_hooker); + return_hooker = ppc_function_entry((void *)return_hooker); /* * Protect against fault, even if it shouldn't @@ -605,7 +586,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) return; } - if (ftrace_push_return_trace(old, self_addr, &trace.depth) == -EBUSY) { + if (ftrace_push_return_trace(old, self_addr, &trace.depth, 0) == -EBUSY) { *parent = old; return; } diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index c01467f952d3..48469463f89e 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -733,9 +733,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) AltiVecUnavailable: EXCEPTION_PROLOG #ifdef CONFIG_ALTIVEC - bne load_up_altivec /* if from user, just load it up */ + beq 1f + bl load_up_altivec /* if from user, just load it up */ + b fast_exception_return #endif /* CONFIG_ALTIVEC */ - addi r3,r1,STACK_FRAME_OVERHEAD +1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) PerformanceMonitor: @@ -743,101 +745,6 @@ PerformanceMonitor: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_STD(0xf00, performance_monitor_exception) -#ifdef CONFIG_ALTIVEC -/* Note that the AltiVec support is closely modeled after the FP - * support. Changes to one are likely to be applicable to the - * other! */ -load_up_altivec: -/* - * Disable AltiVec for the task which had AltiVec previously, - * and save its AltiVec registers in its thread_struct. - * Enables AltiVec for use in the kernel on return. - * On SMP we know the AltiVec units are free, since we give it up every - * switch. -- Kumar - */ - mfmsr r5 - oris r5,r5,MSR_VEC@h - MTMSRD(r5) /* enable use of AltiVec now */ - isync -/* - * For SMP, we don't do lazy AltiVec switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altivec in switch_to. - */ -#ifndef CONFIG_SMP - tophys(r6,0) - addis r3,r6,last_task_used_altivec@ha - lwz r4,last_task_used_altivec@l(r3) - cmpwi 0,r4,0 - beq 1f - add r4,r4,r6 - addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */ - SAVE_32VRS(0,r10,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - lwz r5,PT_REGS(r4) - add r5,r5,r6 - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r10,MSR_VEC@h - andc r4,r4,r10 /* disable altivec for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of AltiVec after return */ - oris r9,r9,MSR_VEC@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r10,r5) -#ifndef CONFIG_SMP - subi r4,r5,THREAD - sub r4,r4,r6 - stw r4,last_task_used_altivec@l(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - /* we haven't used ctr or xer or lr */ - b fast_exception_return - -/* - * giveup_altivec(tsk) - * Disable AltiVec for the task given as the argument, - * and save the AltiVec registers in its thread_struct. - * Enables AltiVec for use in the kernel on return. - */ - - .globl giveup_altivec -giveup_altivec: - mfmsr r5 - oris r5,r5,MSR_VEC@h - SYNC - MTMSRD(r5) /* enable use of AltiVec now */ - isync - cmpwi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - lwz r5,PT_REGS(r3) - cmpwi 0,r5,0 - SAVE_32VRS(0, r4, r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable AltiVec for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - lis r4,last_task_used_altivec@ha - stw r5,last_task_used_altivec@l(r4) -#endif /* CONFIG_SMP */ - blr -#endif /* CONFIG_ALTIVEC */ /* * This code is jumped to from the startup code to copy diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 50ef505b8fb6..012505ebd9f9 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -12,8 +12,9 @@ * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. + * This file contains the entry point for the 64-bit kernel along + * with some early initialization code common to all 64-bit powerpc + * variants. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,36 +39,25 @@ #include <asm/exception.h> #include <asm/irqflags.h> -/* - * We layout physical memory as follows: - * 0x0000 - 0x00ff : Secondary processor spin code - * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs - * 0x6000 - 0x6fff : Initial (CPU0) segment table - * 0x7000 - 0x7fff : FWNMI data area - * 0x8000 - : Early init and support code - */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca +/* The physical memory is layed out such that the secondary processor + * spin code sits at 0x0000...0x00ff. On server, the vectors follow + * using the layout described in exceptions-64s.S */ /* * Entering into this code we make the following assumptions: - * For pSeries: + * + * For pSeries or server processors: * 1. The MMU is off & open firmware is running in real mode. * 2. The kernel is entered at __start * * For iSeries: * 1. The MMU is on (as it always is for iSeries) * 2. The kernel is entered at system_reset_iSeries + * + * For Book3E processors: + * 1. The MMU is on running in AS0 in a state defined in ePAPR + * 2. The kernel is entered at __start */ .text @@ -166,1065 +156,14 @@ exception_marker: .text /* - * This is the start of the interrupt handlers for pSeries - * This code runs with relocation off. - * Code from here to __end_interrupts gets copied down to real - * address 0x100 when we are running a relocatable kernel. - * Therefore any relative branches in this section must only - * branch to labels in this section. - */ - . = 0x100 - .globl __start_interrupts -__start_interrupts: - - STD_EXCEPTION_PSERIES(0x100, system_reset) - - . = 0x200 -_machine_check_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - . = 0x300 - .globl data_access_pSeries -data_access_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) - - . = 0x380 - .globl data_access_slb_pSeries -data_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ -#ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode -#else - /* - * We can't just use a direct branch to .slb_miss_realmode - * because the distance from here to there depends on where - * the kernel ends up being put. - */ - mfctr r11 - ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) - mtctr r10 - bctr -#endif - - STD_EXCEPTION_PSERIES(0x400, instruction_access) - - . = 0x480 - .globl instruction_access_slb_pSeries -instruction_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ -#ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode -#else - mfctr r11 - ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) - mtctr r10 - bctr -#endif - - MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt) - STD_EXCEPTION_PSERIES(0x600, alignment) - STD_EXCEPTION_PSERIES(0x700, program_check) - STD_EXCEPTION_PSERIES(0x800, fp_unavailable) - MASKABLE_EXCEPTION_PSERIES(0x900, decrementer) - STD_EXCEPTION_PSERIES(0xa00, trap_0a) - STD_EXCEPTION_PSERIES(0xb00, trap_0b) - - . = 0xc00 - .globl system_call_pSeries -system_call_pSeries: - HMT_MEDIUM -BEGIN_FTR_SECTION - cmpdi r0,0x1ebe - beq- 1f -END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) - mr r9,r13 - mfspr r13,SPRN_SPRG3 - mfspr r11,SPRN_SRR0 - ld r12,PACAKBASE(r13) - ld r10,PACAKMSR(r13) - LOAD_HANDLER(r12, system_call_entry) - mtspr SPRN_SRR0,r12 - mfspr r12,SPRN_SRR1 - mtspr SPRN_SRR1,r10 - rfid - b . /* prevent speculative execution */ - -/* Fast LE/BE switch system call */ -1: mfspr r12,SPRN_SRR1 - xori r12,r12,MSR_LE - mtspr SPRN_SRR1,r12 - rfid /* return to userspace */ - b . - - STD_EXCEPTION_PSERIES(0xd00, single_step) - STD_EXCEPTION_PSERIES(0xe00, trap_0e) - - /* We need to deal with the Altivec unavailable exception - * here which is at 0xf20, thus in the middle of the - * prolog code of the PerformanceMonitor one. A little - * trickery is thus necessary - */ - . = 0xf00 - b performance_monitor_pSeries - - . = 0xf20 - b altivec_unavailable_pSeries - - . = 0xf40 - b vsx_unavailable_pSeries - -#ifdef CONFIG_CBE_RAS - HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error) -#endif /* CONFIG_CBE_RAS */ - STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) -#ifdef CONFIG_CBE_RAS - HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance) -#endif /* CONFIG_CBE_RAS */ - STD_EXCEPTION_PSERIES(0x1700, altivec_assist) -#ifdef CONFIG_CBE_RAS - HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal) -#endif /* CONFIG_CBE_RAS */ - - . = 0x3000 - -/*** pSeries interrupt support ***/ - - /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., performance_monitor) - STD_EXCEPTION_PSERIES(., altivec_unavailable) - STD_EXCEPTION_PSERIES(., vsx_unavailable) - -/* - * An interrupt came in while soft-disabled; clear EE in SRR1, - * clear paca->hard_enabled and return. - */ -masked_interrupt: - stb r10,PACAHARDIRQEN(r13) - mtcrf 0x80,r9 - ld r9,PACA_EXGEN+EX_R9(r13) - mfspr r10,SPRN_SRR1 - rldicl r10,r10,48,1 /* clear MSR_EE */ - rotldi r10,r10,16 - mtspr SPRN_SRR1,r10 - ld r10,PACA_EXGEN+EX_R10(r13) - mfspr r13,SPRN_SPRG1 - rfid - b . - - .align 7 -do_stab_bolted_pSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) - -#ifdef CONFIG_PPC_PSERIES -/* - * Vectors for the FWNMI option. Share common code. - */ - .globl system_reset_fwnmi - .align 7 -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - - .globl machine_check_fwnmi - .align 7 -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - -#endif /* CONFIG_PPC_PSERIES */ - -#ifdef __DISABLED__ -/* - * This is used for when the SLB miss handler has to go virtual, - * which doesn't happen for now anymore but will once we re-implement - * dynamic VSIDs for shared page tables - */ -slb_miss_user_pseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - clrrdi r12,r13,32 - mfmsr r10 - mfspr r11,SRR0 /* save SRR0 */ - ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mtspr SRR0,r12 - mfspr r12,SRR1 /* and SRR1 */ - mtspr SRR1,r10 - rfid - b . /* prevent spec. execution */ -#endif /* __DISABLED__ */ - - .align 7 - .globl __end_interrupts -__end_interrupts: - -/* - * Code from here down to __end_handlers is invoked from the - * exception prologs above. Because the prologs assemble the - * addresses of these handlers using the LOAD_HANDLER macro, - * which uses an addi instruction, these handlers must be in - * the first 32k of the kernel image. - */ - -/*** Common interrupt handlers ***/ - - STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) - - /* - * Machine check is different because we use a different - * save area: PACA_EXMC instead of PACA_EXGEN. - */ - .align 7 - .globl machine_check_common -machine_check_common: - EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) - FINISH_NAP - DISABLE_INTS - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except - - STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) - STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) - STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) - STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) - STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception) - STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) -#ifdef CONFIG_ALTIVEC - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) -#else - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) -#endif -#ifdef CONFIG_CBE_RAS - STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception) - STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception) - STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception) -#endif /* CONFIG_CBE_RAS */ - - .align 7 -system_call_entry: - b system_call_common - -/* - * Here we have detected that the kernel stack pointer is bad. - * R9 contains the saved CR, r13 points to the paca, - * r10 contains the (bad) kernel stack pointer, - * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using an emergency stack, save the registers there, - * and call kernel_bad_stack(), which panics. - */ -bad_stack: - ld r1,PACAEMERGSP(r13) - subi r1,r1,64+INT_FRAME_SIZE - std r9,_CCR(r1) - std r10,GPR1(r1) - std r11,_NIP(r1) - std r12,_MSR(r1) - mfspr r11,SPRN_DAR - mfspr r12,SPRN_DSISR - std r11,_DAR(r1) - std r12,_DSISR(r1) - mflr r10 - mfctr r11 - mfxer r12 - std r10,_LINK(r1) - std r11,_CTR(r1) - std r12,_XER(r1) - SAVE_GPR(0,r1) - SAVE_GPR(2,r1) - SAVE_4GPRS(3,r1) - SAVE_2GPRS(7,r1) - SAVE_10GPRS(12,r1) - SAVE_10GPRS(22,r1) - lhz r12,PACA_TRAP_SAVE(r13) - std r12,_TRAP(r1) - addi r11,r1,INT_FRAME_SIZE - std r11,0(r1) - li r12,0 - std r12,0(r11) - ld r2,PACATOC(r13) -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack - b 1b - -/* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. - */ - .align 7 - .globl data_access_common -data_access_common: - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ - - .align 7 - .globl instruction_access_common -instruction_access_common: - EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) - ld r3,_NIP(r1) - andis. r4,r12,0x5820 - li r5,0x400 - b .do_hash_page /* Try to handle as hpte fault */ - -/* - * Here is the common SLB miss user that is used when going to virtual - * mode for SLB misses, that is currently not used - */ -#ifdef __DISABLED__ - .align 7 - .globl slb_miss_user_common -slb_miss_user_common: - mflr r10 - std r3,PACA_EXGEN+EX_DAR(r13) - stw r9,PACA_EXGEN+EX_CCR(r13) - std r10,PACA_EXGEN+EX_LR(r13) - std r11,PACA_EXGEN+EX_SRR0(r13) - bl .slb_allocate_user - - ld r10,PACA_EXGEN+EX_LR(r13) - ld r3,PACA_EXGEN+EX_R3(r13) - lwz r9,PACA_EXGEN+EX_CCR(r13) - ld r11,PACA_EXGEN+EX_SRR0(r13) - mtlr r10 - beq- slb_miss_fault - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_user_slb - mfmsr r10 - -.machine push -.machine "power4" - mtcrf 0x80,r9 -.machine pop - - clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ - mtmsrd r10,1 - - mtspr SRR0,r11 - mtspr SRR1,r12 - - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . - -slb_miss_fault: - EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) - ld r4,PACA_EXGEN+EX_DAR(r13) - li r5,0 - std r4,_DAR(r1) - std r5,_DSISR(r1) - b handle_page_fault - -unrecov_user_slb: - EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -#endif /* __DISABLED__ */ - - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r12 contain the saved SRR1, SRR0 is still ready for return - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(slb_miss_realmode) - mflr r10 -#ifdef CONFIG_RELOCATABLE - mtctr r11 -#endif - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate_realmode - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - ld r11,PACALPPACAPTR(r13) - ld r11,LPPACASRR0(r11) /* get SRR0 value */ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- 2f - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -2: -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - b unrecov_slb -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ - mfspr r11,SPRN_SRR0 - ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10,unrecov_slb) - mtspr SPRN_SRR0,r10 - ld r10,PACAKMSR(r13) - mtspr SPRN_SRR1,r10 - rfid - b . - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - .align 7 - .globl hardware_interrupt_common - .globl hardware_interrupt_entry -hardware_interrupt_common: - EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) - FINISH_NAP -hardware_interrupt_entry: - DISABLE_INTS -BEGIN_FTR_SECTION - bl .ppc64_runlatch_on -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite - -#ifdef CONFIG_PPC_970_NAP -power4_fixup_nap: - andc r9,r9,r10 - std r9,TI_LOCAL_FLAGS(r11) - ld r10,_LINK(r1) /* make idle task do the */ - std r10,_NIP(r1) /* equivalent of a blr */ - blr -#endif - - .align 7 - .globl alignment_common -alignment_common: - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - std r3,_DAR(r1) - std r4,_DSISR(r1) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .alignment_exception - b .ret_from_except - - .align 7 - .globl program_check_common -program_check_common: - EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .program_check_exception - b .ret_from_except - - .align 7 - .globl fp_unavailable_common -fp_unavailable_common: - EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) - bne 1f /* if from user, just load it up */ - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .kernel_fp_unavailable_exception - BUG_OPCODE -1: bl .load_up_fpu - b fast_exception_return - - .align 7 - .globl altivec_unavailable_common -altivec_unavailable_common: - EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) -#ifdef CONFIG_ALTIVEC -BEGIN_FTR_SECTION - beq 1f - bl .load_up_altivec - b fast_exception_return -1: -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) -#endif - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .altivec_unavailable_exception - b .ret_from_except - - .align 7 - .globl vsx_unavailable_common -vsx_unavailable_common: - EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) -#ifdef CONFIG_VSX -BEGIN_FTR_SECTION - bne .load_up_vsx -1: -END_FTR_SECTION_IFSET(CPU_FTR_VSX) -#endif - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .vsx_unavailable_exception - b .ret_from_except - - .align 7 - .globl __end_handlers -__end_handlers: - -/* - * Return from an exception with minimal checks. - * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. - * If interrupts have been enabled, or anything has been - * done that might have changed the scheduling status of - * any task or sent any task a signal, you should use - * ret_from_except or ret_from_except_lite instead of this. + * On server, we include the exception vectors code here as it + * relies on absolute addressing which is only possible within + * this compilation unit */ -fast_exc_return_irq: /* restores irq state too */ - ld r3,SOFTE(r1) - TRACE_AND_RESTORE_IRQ(r3); - ld r12,_MSR(r1) - rldicl r4,r12,49,63 /* get MSR_EE to LSB */ - stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ - b 1f - - .globl fast_exception_return -fast_exception_return: - ld r12,_MSR(r1) -1: ld r11,_NIP(r1) - andi. r3,r12,MSR_RI /* check if RI is set */ - beq- unrecov_fer - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING - andi. r3,r12,MSR_PR - beq 2f - ACCOUNT_CPU_USER_EXIT(r3, r4) -2: +#ifdef CONFIG_PPC_BOOK3S +#include "exceptions-64s.S" #endif - ld r3,_CCR(r1) - ld r4,_LINK(r1) - ld r5,_CTR(r1) - ld r6,_XER(r1) - mtcr r3 - mtlr r4 - mtctr r5 - mtxer r6 - REST_GPR(0, r1) - REST_8GPRS(2, r1) - - mfmsr r10 - rldicl r10,r10,48,1 /* clear EE */ - rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */ - mtmsrd r10,1 - - mtspr SPRN_SRR1,r12 - mtspr SPRN_SRR0,r11 - REST_4GPRS(10, r1) - ld r1,GPR1(r1) - rfid - b . /* prevent speculative execution */ - -unrecov_fer: - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -#ifdef CONFIG_ALTIVEC -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - blr -#endif /* CONFIG_ALTIVEC */ - -#ifdef CONFIG_VSX -/* - * load_up_vsx(unused, unused, tsk) - * Disable VSX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Reuse the fp and vsx saves, but first check to see if they have - * been saved already. - * On entry: r13 == 'current' && last_task_used_vsx != 'current' - */ -_STATIC(load_up_vsx) -/* Load FP and VSX registers if they haven't been done yet */ - andi. r5,r12,MSR_FP - beql+ load_up_fpu /* skip if already loaded */ - andis. r5,r12,MSR_VEC@h - beql+ load_up_altivec /* skip if already loaded */ - -#ifndef CONFIG_SMP - ld r3,last_task_used_vsx@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Disable VSX for last_task_used_vsx */ - addi r4,r4,THREAD - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VSX@h - andc r6,r4,r6 - std r6,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - ld r4,PACACURRENT(r13) - addi r4,r4,THREAD /* Get THREAD */ - li r6,1 - stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ - /* enable use of VSX after return */ - oris r12,r12,MSR_VSX@h - std r12,_MSR(r1) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - ld r4,PACACURRENT(r13) - std r4,0(r3) -#endif /* CONFIG_SMP */ - b fast_exception_return -#endif /* CONFIG_VSX */ - -/* - * Hash table stuff - */ - .align 7 -_STATIC(do_hash_page) - std r3,_DAR(r1) - std r4,_DSISR(r1) - - andis. r0,r4,0xa450 /* weird error? */ - bne- handle_page_fault /* if not, try to insert a HPTE */ -BEGIN_FTR_SECTION - andis. r0,r4,0x0020 /* Is it a segment table fault? */ - bne- do_ste_alloc /* If so handle it */ -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - - /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* - * Currently, trace_hardirqs_off() will be called by DISABLE_INTS - * and will clobber volatile registers when irq tracing is enabled - * so we need to reload them. It may be possible to be smarter here - * and move the irq tracing elsewhere but let's keep it simple for - * now - */ -#ifdef CONFIG_TRACE_IRQFLAGS - ld r3,_DAR(r1) - ld r4,_DSISR(r1) - ld r5,_TRAP(r1) - ld r12,_MSR(r1) - clrrdi r5,r5,4 -#endif /* CONFIG_TRACE_IRQFLAGS */ - /* - * We need to set the _PAGE_USER bit if MSR_PR is set or if we are - * accessing a userspace segment (even from the kernel). We assume - * kernel addresses always have the high bit set. - */ - rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ - rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ - orc r0,r12,r0 /* MSR_PR | ~high_bit */ - rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ - ori r4,r4,1 /* add _PAGE_PRESENT */ - rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ - - /* - * r3 contains the faulting address - * r4 contains the required access permissions - * r5 contains the trap number - * - * at return r3 = 0 for success - */ - bl .hash_page /* build HPTE if possible */ - cmpdi r3,0 /* see if hash_page succeeded */ - -BEGIN_FW_FTR_SECTION - /* - * If we had interrupts soft-enabled at the point where the - * DSI/ISI occurred, and an interrupt came in during hash_page, - * handle it now. - * We jump to ret_from_except_lite rather than fast_exception_return - * because ret_from_except_lite will check for and handle pending - * interrupts if necessary. - */ - beq 13f -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) - -BEGIN_FW_FTR_SECTION - /* - * Here we have interrupts hard-disabled, so it is sufficient - * to restore paca->{soft,hard}_enable and get out. - */ - beq fast_exc_return_irq /* Return from exception on success */ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) - - /* For a hash failure, we don't bother re-enabling interrupts */ - ble- 12f - - /* - * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .raw_local_irq_restore - * handles any interrupts pending at this point. - */ - ld r3,SOFTE(r1) - TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) - bl .raw_local_irq_restore - b 11f - -/* Here we have a page fault that hash_page can't handle. */ -handle_page_fault: - ENABLE_INTS -11: ld r4,_DAR(r1) - ld r5,_DSISR(r1) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_page_fault - cmpdi r3,0 - beq+ 13f - bl .save_nvgprs - mr r5,r3 - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except - -13: b .ret_from_except_lite - -/* We have a page fault that hash_page could handle but HV refused - * the PTE insertion - */ -12: bl .save_nvgprs - mr r5,r3 - addi r3,r1,STACK_FRAME_OVERHEAD - ld r4,_DAR(r1) - bl .low_hash_fault - b .ret_from_except - - /* here we have a segment miss */ -do_ste_alloc: - bl .ste_allocate /* try to insert stab entry */ - cmpdi r3,0 - bne- handle_page_fault - b fast_exception_return - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r11 and r12 contain the saved SRR0 and SRR1. - * r9 - r13 are saved in paca->exslb. - * We assume we aren't going to take any exceptions during this procedure. - * We assume (DAR >> 60) == 0xc. - */ - .align 7 -_GLOBAL(do_stab_bolted) - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ - - /* Hash to the primary group */ - ld r10,PACASTABVIRT(r13) - mfspr r11,SPRN_DAR - srdi r11,r11,28 - rldimi r10,r11,7,52 /* r10 = first ste of the group */ - - /* Calculate VSID */ - /* This is a kernel address, so protovsid = ESID */ - ASM_VSID_SCRAMBLE(r11, r9, 256M) - rldic r9,r11,12,16 /* r9 = vsid << 12 */ - - /* Search the primary group for a free entry */ -1: ld r11,0(r10) /* Test valid bit of the current ste */ - andi. r11,r11,0x80 - beq 2f - addi r10,r10,16 - andi. r11,r10,0x70 - bne 1b - - /* Stick for only searching the primary group for now. */ - /* At least for now, we use a very simple random castout scheme */ - /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ - mftb r11 - rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ - ori r11,r11,0x10 - - /* r10 currently points to an ste one past the group of interest */ - /* make it point to the randomly selected entry */ - subi r10,r10,128 - or r10,r10,r11 /* r10 is the entry to invalidate */ - - isync /* mark the entry invalid */ - ld r11,0(r10) - rldicl r11,r11,56,1 /* clear the valid bit */ - rotldi r11,r11,8 - std r11,0(r10) - sync - - clrrdi r11,r11,28 /* Get the esid part of the ste */ - slbie r11 - -2: std r9,8(r10) /* Store the vsid part of the ste */ - eieio - - mfspr r11,SPRN_DAR /* Get the new esid */ - clrrdi r11,r11,28 /* Permits a full 32b of ESID */ - ori r11,r11,0x90 /* Turn on valid and kp */ - std r11,0(r10) /* Put new entry back into the stab */ - - sync - - /* All done -- return from exception. */ - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ - - andi. r10,r12,MSR_RI - beq- unrecov_slb - - mtcrf 0x80,r9 /* restore CR */ - - mfmsr r10 - clrrdi r10,r10,2 - mtmsrd r10,1 - - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -/* - * Space for CPU0's segment table. - * - * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is given to the hv - * as a page number (see xLparMap below), so this must be at a - * fixed address (the linker can't compute (u64)&initial_stab >> - * PAGE_SHIFT). - */ - . = STAB0_OFFSET /* 0x6000 */ - .globl initial_stab -initial_stab: - .space 4096 - -#ifdef CONFIG_PPC_PSERIES -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: -#endif /* CONFIG_PPC_PSERIES */ - - /* iSeries does not use the FWNMI stuff, so it is safe to put - * this here, even if we later allow kernels that will boot on - * both pSeries and iSeries */ -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS - .globl xLparMap -xLparMap: - .quad HvEsidsToMap /* xNumberEsids */ - .quad HvRangesToMap /* xNumberRanges */ - .quad STAB0_PAGE /* xSegmentTableOffs */ - .zero 40 /* xRsvd */ - /* xEsids (HvEsidsToMap entries of 2 quads) */ - .quad PAGE_OFFSET_ESID /* xKernelEsid */ - .quad PAGE_OFFSET_VSID /* xKernelVsid */ - .quad VMALLOC_START_ESID /* xKernelEsid */ - .quad VMALLOC_START_VSID /* xKernelVsid */ - /* xRanges (HvRangesToMap entries of 3 quads) */ - .quad HvPagesToMap /* xPages */ - .quad 0 /* xOffset */ - .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ - -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_PSERIES - . = 0x8000 -#endif /* CONFIG_PPC_PSERIES */ /* * On pSeries and most other platforms, secondary processors spin diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 95f39f1e68d4..5f9febc8d143 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -256,7 +256,7 @@ label: * off DE in the DSRR1 value and clearing the debug status. \ */ \ mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ - andis. r10,r10,DBSR_IC@h; \ + andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ beq+ 2f; \ \ lis r10,KERNELBASE@h; /* check if exception in vectors */ \ @@ -271,7 +271,7 @@ label: \ /* here it looks like we got an inappropriate debug exception. */ \ 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ - lis r10,DBSR_IC@h; /* clear the IC event */ \ + lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ mtspr SPRN_DBSR,r10; \ /* restore state and get out */ \ lwz r10,_CCR(r11); \ @@ -309,7 +309,7 @@ label: * off DE in the CSRR1 value and clearing the debug status. \ */ \ mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ - andis. r10,r10,DBSR_IC@h; \ + andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ beq+ 2f; \ \ lis r10,KERNELBASE@h; /* check if exception in vectors */ \ @@ -317,14 +317,14 @@ label: cmplw r12,r10; \ blt+ 2f; /* addr below exception vectors */ \ \ - lis r10,DebugCrit@h; \ + lis r10,DebugCrit@h; \ ori r10,r10,DebugCrit@l; \ cmplw r12,r10; \ bgt+ 2f; /* addr above exception vectors */ \ \ /* here it looks like we got an inappropriate debug exception. */ \ 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \ - lis r10,DBSR_IC@h; /* clear the IC event */ \ + lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ mtspr SPRN_DBSR,r10; \ /* restore state and get out */ \ lwz r10,_CCR(r11); \ diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c index 688b329800bd..ffc4253fef55 100644 --- a/arch/powerpc/kernel/init_task.c +++ b/arch/powerpc/kernel/init_task.c @@ -9,10 +9,6 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); - -EXPORT_SYMBOL(init_mm); - /* * Initial thread structure. * diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 8c1a4966867e..f7f376ea7b17 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -53,6 +53,7 @@ #include <linux/bootmem.h> #include <linux/pci.h> #include <linux/debugfs.h> +#include <linux/perf_counter.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -117,6 +118,7 @@ notrace void raw_local_irq_restore(unsigned long en) if (!en) return; +#ifdef CONFIG_PPC_STD_MMU_64 if (firmware_has_feature(FW_FEATURE_ISERIES)) { /* * Do we need to disable preemption here? Not really: in the @@ -134,6 +136,12 @@ notrace void raw_local_irq_restore(unsigned long en) if (local_paca->lppaca_ptr->int_dword.any_int) iseries_handle_interrupts(); } +#endif /* CONFIG_PPC_STD_MMU_64 */ + + if (test_perf_counter_pending()) { + clear_perf_counter_pending(); + perf_counter_do_pending(); + } /* * if (get_paca()->hard_enabled) return; @@ -248,77 +256,84 @@ void fixup_irqs(cpumask_t map) } #endif -void do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - unsigned int irq; #ifdef CONFIG_IRQSTACKS +static inline void handle_one_irq(unsigned int irq) +{ struct thread_info *curtp, *irqtp; -#endif + unsigned long saved_sp_limit; + struct irq_desc *desc; - irq_enter(); + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + + if (curtp == irqtp) { + /* We're already on the irq stack, just handle it */ + generic_handle_irq(irq); + return; + } + + desc = irq_desc + irq; + saved_sp_limit = current->thread.ksp_limit; + + irqtp->task = curtp->task; + irqtp->flags = 0; + + /* Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. */ + irqtp->preempt_count = (irqtp->preempt_count & ~SOFTIRQ_MASK) | + (curtp->preempt_count & SOFTIRQ_MASK); + + current->thread.ksp_limit = (unsigned long)irqtp + + _ALIGN_UP(sizeof(struct thread_info), 16); + + call_handle_irq(irq, desc, irqtp, desc->handle_irq); + current->thread.ksp_limit = saved_sp_limit; + irqtp->task = NULL; + /* Set any flag that may have been set on the + * alternate stack + */ + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); +} +#else +static inline void handle_one_irq(unsigned int irq) +{ + generic_handle_irq(irq); +} +#endif + +static inline void check_stack_overflow(void) +{ #ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 2KB free? */ - { - long sp; + long sp; - sp = __get_SP() & (THREAD_SIZE-1); + sp = __get_SP() & (THREAD_SIZE-1); - if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } + /* check for stack overflow: is there less than 2KB free? */ + if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { + printk("do_IRQ: stack overflow: %ld\n", + sp - sizeof(struct thread_info)); + dump_stack(); } #endif +} - /* - * Every platform is required to implement ppc_md.get_irq. - * This function will either return an irq number or NO_IRQ to - * indicate there are no more pending. - * The value NO_IRQ_IGNORE is for buggy hardware and means that this - * IRQ has already been handled. -- Tom - */ - irq = ppc_md.get_irq(); +void do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + unsigned int irq; - if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) { -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - struct irq_desc *desc = irq_desc + irq; - void *handler = desc->handle_irq; - unsigned long saved_sp_limit = current->thread.ksp_limit; - if (handler == NULL) - handler = &__do_IRQ; - irqtp->task = curtp->task; - irqtp->flags = 0; - - /* Copy the softirq bits in preempt_count so that the - * softirq checks work in the hardirq context. - */ - irqtp->preempt_count = - (irqtp->preempt_count & ~SOFTIRQ_MASK) | - (curtp->preempt_count & SOFTIRQ_MASK); + irq_enter(); - current->thread.ksp_limit = (unsigned long)irqtp + - _ALIGN_UP(sizeof(struct thread_info), 16); - call_handle_irq(irq, desc, irqtp, handler); - current->thread.ksp_limit = saved_sp_limit; - irqtp->task = NULL; + check_stack_overflow(); + irq = ppc_md.get_irq(); - /* Set any flag that may have been set on the - * alternate stack - */ - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - generic_handle_irq(irq); - } else if (irq != NO_IRQ_IGNORE) + if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) + handle_one_irq(irq); + else if (irq != NO_IRQ_IGNORE) /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 78b3f7840ade..2419cc706ff1 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -169,6 +169,9 @@ struct hvcall_ppp_data { u8 unallocated_weight; u16 active_procs_in_pool; u16 active_system_procs; + u16 phys_platform_procs; + u32 max_proc_cap_avail; + u32 entitled_proc_cap_avail; }; /* @@ -190,13 +193,18 @@ struct hvcall_ppp_data { * XX - Unallocated Variable Processor Capacity Weight. * XXXX - Active processors in Physical Processor Pool. * XXXX - Processors active on platform. + * R8 (QQQQRRRRRRSSSSSS). if ibm,partition-performance-parameters-level >= 1 + * XXXX - Physical platform procs allocated to virtualization. + * XXXXXX - Max procs capacity % available to the partitions pool. + * XXXXXX - Entitled procs capacity % available to the + * partitions pool. */ static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data) { unsigned long rc; - unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; - rc = plpar_hcall(H_GET_PPP, retbuf); + rc = plpar_hcall9(H_GET_PPP, retbuf); ppp_data->entitlement = retbuf[0]; ppp_data->unallocated_entitlement = retbuf[1]; @@ -210,6 +218,10 @@ static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data) ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff; ppp_data->active_system_procs = retbuf[3] & 0xffff; + ppp_data->phys_platform_procs = retbuf[4] >> 6 * 8; + ppp_data->max_proc_cap_avail = (retbuf[4] >> 3 * 8) & 0xffffff; + ppp_data->entitled_proc_cap_avail = retbuf[4] & 0xffffff; + return rc; } @@ -234,6 +246,8 @@ static unsigned h_pic(unsigned long *pool_idle_time, static void parse_ppp_data(struct seq_file *m) { struct hvcall_ppp_data ppp_data; + struct device_node *root; + const int *perf_level; int rc; rc = h_get_ppp(&ppp_data); @@ -267,6 +281,28 @@ static void parse_ppp_data(struct seq_file *m) seq_printf(m, "capped=%d\n", ppp_data.capped); seq_printf(m, "unallocated_capacity=%lld\n", ppp_data.unallocated_entitlement); + + /* The last bits of information returned from h_get_ppp are only + * valid if the ibm,partition-performance-parameters-level + * property is >= 1. + */ + root = of_find_node_by_path("/"); + if (root) { + perf_level = of_get_property(root, + "ibm,partition-performance-parameters-level", + NULL); + if (perf_level && (*perf_level >= 1)) { + seq_printf(m, + "physical_procs_allocated_to_virtualization=%d\n", + ppp_data.phys_platform_procs); + seq_printf(m, "max_proc_capacity_available=%d\n", + ppp_data.max_proc_cap_avail); + seq_printf(m, "entitled_proc_capacity_available=%d\n", + ppp_data.entitled_proc_cap_avail); + } + + of_node_put(root); + } } /** diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b9530b2395a2..a5cf9c1356a6 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -457,98 +457,6 @@ _GLOBAL(disable_kernel_fp) isync blr -#ifdef CONFIG_ALTIVEC - -#if 0 /* this has no callers for now */ -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr -#endif /* 0 */ - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) -#ifdef CONFIG_VSX -BEGIN_FTR_SECTION - lis r3,(MSR_VEC|MSR_VSX)@h -FTR_SECTION_ELSE - lis r3,MSR_VEC@h -ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) -#else - lis r3,MSR_VEC@h -#endif - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - -#ifdef CONFIG_VSX -/* - * __giveup_vsx(tsk) - * Disable VSX for the task given as the argument. - * Does NOT save vsx registers. - * Enables the VSX for use in the kernel on return. - */ -_GLOBAL(__giveup_vsx) - mfmsr r5 - oris r5,r5,MSR_VSX@h - mtmsrd r5 /* enable use of VSX now */ - isync - - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VSX@h - andc r4,r4,r3 /* disable VSX for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_vsx@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_VSX */ - /* kexec_wait(phys_cpu) * * wait for the flag to change, indicating this kernel is going away but diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c index 43e7e3a7f130..477c663e0140 100644 --- a/arch/powerpc/kernel/module.c +++ b/arch/powerpc/kernel/module.c @@ -43,8 +43,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c new file mode 100644 index 000000000000..75ff47fed7bf --- /dev/null +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -0,0 +1,417 @@ +/* + * Performance counter support for MPC7450-family processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +#define N_COUNTER 6 /* Number of hardware counters */ +#define MAX_ALT 3 /* Maximum number of event alternative codes */ + +/* + * Bits in event code for MPC7450 family + */ +#define PM_THRMULT_MSKS 0x40000 +#define PM_THRESH_SH 12 +#define PM_THRESH_MSK 0x3f +#define PM_PMC_SH 8 +#define PM_PMC_MSK 7 +#define PM_PMCSEL_MSK 0x7f + +/* + * Classify events according to how specific their PMC requirements are. + * Result is: + * 0: can go on any PMC + * 1: can go on PMCs 1-4 + * 2: can go on PMCs 1,2,4 + * 3: can go on PMCs 1 or 2 + * 4: can only go on one PMC + * -1: event code is invalid + */ +#define N_CLASSES 5 + +static int mpc7450_classify_event(u32 event) +{ + int pmc; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > N_COUNTER) + return -1; + return 4; + } + event &= PM_PMCSEL_MSK; + if (event <= 1) + return 0; + if (event <= 7) + return 1; + if (event <= 13) + return 2; + if (event <= 22) + return 3; + return -1; +} + +/* + * Events using threshold and possible threshold scale: + * code scale? name + * 11e N PM_INSTQ_EXCEED_CYC + * 11f N PM_ALTV_IQ_EXCEED_CYC + * 128 Y PM_DTLB_SEARCH_EXCEED_CYC + * 12b Y PM_LD_MISS_EXCEED_L1_CYC + * 220 N PM_CQ_EXCEED_CYC + * 30c N PM_GPR_RB_EXCEED_CYC + * 30d ? PM_FPR_IQ_EXCEED_CYC ? + * 311 Y PM_ITLB_SEARCH_EXCEED + * 410 N PM_GPR_IQ_EXCEED_CYC + */ + +/* + * Return use of threshold and threshold scale bits: + * 0 = uses neither, 1 = uses threshold, 2 = uses both + */ +static int mpc7450_threshold_use(u32 event) +{ + int pmc, sel; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + sel = event & PM_PMCSEL_MSK; + switch (pmc) { + case 1: + if (sel == 0x1e || sel == 0x1f) + return 1; + if (sel == 0x28 || sel == 0x2b) + return 2; + break; + case 2: + if (sel == 0x20) + return 1; + break; + case 3: + if (sel == 0xc || sel == 0xd) + return 1; + if (sel == 0x11) + return 2; + break; + case 4: + if (sel == 0x10) + return 1; + break; + } + return 0; +} + +/* + * Layout of constraint bits: + * 33222222222211111111110000000000 + * 10987654321098765432109876543210 + * |< >< > < > < ><><><><><><> + * TS TV G4 G3 G2P6P5P4P3P2P1 + * + * P1 - P6 + * 0 - 11: Count of events needing PMC1 .. PMC6 + * + * G2 + * 12 - 14: Count of events needing PMC1 or PMC2 + * + * G3 + * 16 - 18: Count of events needing PMC1, PMC2 or PMC4 + * + * G4 + * 20 - 23: Count of events needing PMC1, PMC2, PMC3 or PMC4 + * + * TV + * 24 - 29: Threshold value requested + * + * TS + * 30: Threshold scale value requested + */ + +static u32 pmcbits[N_COUNTER][2] = { + { 0x00844002, 0x00111001 }, /* PMC1 mask, value: P1,G2,G3,G4 */ + { 0x00844008, 0x00111004 }, /* PMC2: P2,G2,G3,G4 */ + { 0x00800020, 0x00100010 }, /* PMC3: P3,G4 */ + { 0x00840080, 0x00110040 }, /* PMC4: P4,G3,G4 */ + { 0x00000200, 0x00000100 }, /* PMC5: P5 */ + { 0x00000800, 0x00000400 } /* PMC6: P6 */ +}; + +static u32 classbits[N_CLASSES - 1][2] = { + { 0x00000000, 0x00000000 }, /* class 0: no constraint */ + { 0x00800000, 0x00100000 }, /* class 1: G4 */ + { 0x00040000, 0x00010000 }, /* class 2: G3 */ + { 0x00004000, 0x00001000 }, /* class 3: G2 */ +}; + +static int mpc7450_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, class; + u32 mask, value; + int thresh, tuse; + + class = mpc7450_classify_event(event); + if (class < 0) + return -1; + if (class == 4) { + pmc = ((unsigned int)event >> PM_PMC_SH) & PM_PMC_MSK; + mask = pmcbits[pmc - 1][0]; + value = pmcbits[pmc - 1][1]; + } else { + mask = classbits[class][0]; + value = classbits[class][1]; + } + + tuse = mpc7450_threshold_use(event); + if (tuse) { + thresh = ((unsigned int)event >> PM_THRESH_SH) & PM_THRESH_MSK; + mask |= 0x3f << 24; + value |= thresh << 24; + if (tuse == 2) { + mask |= 0x40000000; + if ((unsigned int)event & PM_THRMULT_MSKS) + value |= 0x40000000; + } + } + + *maskp = mask; + *valp = value; + return 0; +} + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x217, 0x317 }, /* PM_L1_DCACHE_MISS */ + { 0x418, 0x50f, 0x60f }, /* PM_SNOOP_RETRY */ + { 0x502, 0x602 }, /* PM_L2_HIT */ + { 0x503, 0x603 }, /* PM_L3_HIT */ + { 0x504, 0x604 }, /* PM_L2_ICACHE_MISS */ + { 0x505, 0x605 }, /* PM_L3_ICACHE_MISS */ + { 0x506, 0x606 }, /* PM_L2_DCACHE_MISS */ + { 0x507, 0x607 }, /* PM_L3_DCACHE_MISS */ + { 0x50a, 0x623 }, /* PM_LD_HIT_L3 */ + { 0x50b, 0x624 }, /* PM_ST_HIT_L3 */ + { 0x50d, 0x60d }, /* PM_L2_TOUCH_HIT */ + { 0x50e, 0x60e }, /* PM_L3_TOUCH_HIT */ + { 0x512, 0x612 }, /* PM_INT_LOCAL */ + { 0x513, 0x61d }, /* PM_L2_MISS */ + { 0x514, 0x61e }, /* PM_L3_MISS */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(u32 event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static int mpc7450_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + u32 ae; + + alt[0] = event; + nalt = 1; + i = find_alternative((u32)event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != (u32)event) + alt[nalt++] = ae; + } + } + return nalt; +} + +/* + * Bitmaps of which PMCs each class can use for classes 0 - 3. + * Bit i is set if PMC i+1 is usable. + */ +static const u8 classmap[N_CLASSES] = { + 0x3f, 0x0f, 0x0b, 0x03, 0 +}; + +/* Bit position and width of each PMCSEL field */ +static const int pmcsel_shift[N_COUNTER] = { + 6, 0, 27, 22, 17, 11 +}; +static const u32 pmcsel_mask[N_COUNTER] = { + 0x7f, 0x3f, 0x1f, 0x1f, 0x1f, 0x3f +}; + +/* + * Compute MMCR0/1/2 values for a set of events. + */ +static int mpc7450_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + u8 event_index[N_CLASSES][N_COUNTER]; + int n_classevent[N_CLASSES]; + int i, j, class, tuse; + u32 pmc_inuse = 0, pmc_avail; + u32 mmcr0 = 0, mmcr1 = 0, mmcr2 = 0; + u32 ev, pmc, thresh; + + if (n_ev > N_COUNTER) + return -1; + + /* First pass: count usage in each class */ + for (i = 0; i < N_CLASSES; ++i) + n_classevent[i] = 0; + for (i = 0; i < n_ev; ++i) { + class = mpc7450_classify_event(event[i]); + if (class < 0) + return -1; + j = n_classevent[class]++; + event_index[class][j] = i; + } + + /* Second pass: allocate PMCs from most specific event to least */ + for (class = N_CLASSES - 1; class >= 0; --class) { + for (i = 0; i < n_classevent[class]; ++i) { + ev = event[event_index[class][i]]; + if (class == 4) { + pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + } else { + /* Find a suitable PMC */ + pmc_avail = classmap[class] & ~pmc_inuse; + if (!pmc_avail) + return -1; + pmc = ffs(pmc_avail); + } + pmc_inuse |= 1 << (pmc - 1); + + tuse = mpc7450_threshold_use(ev); + if (tuse) { + thresh = (ev >> PM_THRESH_SH) & PM_THRESH_MSK; + mmcr0 |= thresh << 16; + if (tuse == 2 && (ev & PM_THRMULT_MSKS)) + mmcr2 = 0x80000000; + } + ev &= pmcsel_mask[pmc - 1]; + ev <<= pmcsel_shift[pmc - 1]; + if (pmc <= 2) + mmcr0 |= ev; + else + mmcr1 |= ev; + hwc[event_index[class][i]] = pmc - 1; + } + } + + if (pmc_inuse & 1) + mmcr0 |= MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr0 |= MMCR0_PMCnCE; + + /* Return MMCRx values */ + mmcr[0] = mmcr0; + mmcr[1] = mmcr1; + mmcr[2] = mmcr2; + return 0; +} + +/* + * Disable counting by a PMC. + * Note that the pmc argument is 0-based here, not 1-based. + */ +static void mpc7450_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + if (pmc <= 1) + mmcr[0] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]); + else + mmcr[1] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]); +} + +static int mpc7450_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 1, + [PERF_COUNT_HW_INSTRUCTIONS] = 2, + [PERF_COUNT_HW_CACHE_MISSES] = 0x217, /* PM_L1_DCACHE_MISS */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x122, /* PM_BR_CMPL */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x41c, /* PM_BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x225 }, + [C(OP_WRITE)] = { 0, 0x227 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x129, 0x115 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0x634, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x312 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x223 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x122, 0x41c }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu mpc7450_pmu = { + .name = "MPC7450 family", + .n_counter = N_COUNTER, + .max_alternatives = MAX_ALT, + .add_fields = 0x00111555ul, + .test_adder = 0x00301000ul, + .compute_mmcr = mpc7450_compute_mmcr, + .get_constraint = mpc7450_get_constraint, + .get_alternatives = mpc7450_get_alternatives, + .disable_pmc = mpc7450_disable_pmc, + .n_generic = ARRAY_SIZE(mpc7450_generic_events), + .generic_events = mpc7450_generic_events, + .cache_events = &mpc7450_cache_events, +}; + +static int init_mpc7450_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450")) + return -ENODEV; + + return register_power_pmu(&mpc7450_pmu); +} + +arch_initcall(init_mpc7450_pmu); diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index c744b327bcab..e9962c7f8a09 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -18,6 +18,8 @@ * field correctly */ extern unsigned long __toc_start; +#ifdef CONFIG_PPC_BOOK3S + /* * The structure which the hypervisor knows about - this structure * should not cross a page boundary. The vpa_init/register_vpa call @@ -41,6 +43,10 @@ struct lppaca lppaca[] = { }, }; +#endif /* CONFIG_PPC_BOOK3S */ + +#ifdef CONFIG_PPC_STD_MMU_64 + /* * 3 persistent SLBs are registered here. The buffer will be zero * initially, hence will all be invaild until we actually write them. @@ -52,6 +58,8 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = { }, }; +#endif /* CONFIG_PPC_STD_MMU_64 */ + /* The Paca is an array with one entry per processor. Each contains an * lppaca, which contains the information shared between the * hypervisor and Linux. @@ -77,15 +85,19 @@ void __init initialise_pacas(void) for (cpu = 0; cpu < NR_CPUS; cpu++) { struct paca_struct *new_paca = &paca[cpu]; +#ifdef CONFIG_PPC_BOOK3S new_paca->lppaca_ptr = &lppaca[cpu]; +#endif new_paca->lock_token = 0x8000; new_paca->paca_index = cpu; new_paca->kernel_toc = kernel_toc; new_paca->kernelbase = (unsigned long) _stext; new_paca->kernel_msr = MSR_KERNEL; new_paca->hw_cpu_id = 0xffff; - new_paca->slb_shadow_ptr = &slb_shadow[cpu]; new_paca->__current = &init_task; +#ifdef CONFIG_PPC_STD_MMU_64 + new_paca->slb_shadow_ptr = &slb_shadow[cpu]; +#endif /* CONFIG_PPC_STD_MMU_64 */ } } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 4fee63cb53ff..5a56e97c5ac0 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1505,7 +1505,7 @@ void __init pcibios_resource_survey(void) * rest of the code later, for now, keep it as-is as our main * resource allocation function doesn't deal with sub-trees yet. */ -void __devinit pcibios_claim_one_bus(struct pci_bus *bus) +void pcibios_claim_one_bus(struct pci_bus *bus) { struct pci_dev *dev; struct pci_bus *child_bus; @@ -1533,7 +1533,6 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus) list_for_each_entry(child_bus, &bus->children, node) pcibios_claim_one_bus(child_bus); } -EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); /* pcibios_finish_adding_to_bus diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index d473634e39e3..3ae1c666ff92 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -33,7 +33,6 @@ int pcibios_assign_bus_offset = 1; void pcibios_make_OF_bus_map(void); -static void fixup_broken_pcnet32(struct pci_dev* dev); static void fixup_cpc710_pci64(struct pci_dev* dev); #ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; @@ -72,16 +71,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_res DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); static void -fixup_broken_pcnet32(struct pci_dev* dev) -{ - if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { - dev->vendor = PCI_VENDOR_ID_AMD; - pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); - -static void fixup_cpc710_pci64(struct pci_dev* dev) { /* Hide the PCI64 BARs from the kernel as their content doesn't @@ -447,14 +436,6 @@ static int __init pcibios_init(void) subsys_initcall(pcibios_init); -/* the next one is stolen from the alpha port... */ -void __init -pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); - /* XXX FIXME - update OF device tree node interrupt property */ -} - static struct pci_controller* pci_bus_to_hose(int bus) { diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 96edb6f8babb..9e8902fa14c7 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -43,16 +43,6 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); -static void fixup_broken_pcnet32(struct pci_dev* dev) -{ - if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { - dev->vendor = PCI_VENDOR_ID_AMD; - pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); - - static u32 get_int_prop(struct device_node *np, const char *name, u32 def) { const u32 *prop; @@ -430,6 +420,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus) * so flushing the hash table is the only sane way to make sure * that no hash entries are covering that removed bridge area * while still allowing other busses overlapping those pages + * + * Note: If we ever support P2P hotplug on Book3E, we'll have + * to do an appropriate TLB flush here too */ if (bus->self) { struct resource *res = bus->resource[0]; @@ -437,8 +430,10 @@ int pcibios_unmap_io_space(struct pci_bus *bus) pr_debug("IO unmapping for PCI-PCI bridge %s\n", pci_name(bus->self)); +#ifdef CONFIG_PPC_STD_MMU_64 __flush_hash_table_range(&init_mm, res->start + _IO_BASE, res->end + _IO_BASE + 1); +#endif return 0; } @@ -511,7 +506,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) pr_debug("IO mapping for PHB %s\n", hose->dn->full_name); pr_debug(" phys=0x%016llx, virt=0x%p (alloc=0x%p)\n", hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc); - pr_debug(" size=0x%016lx (alloc=0x%016lx)\n", + pr_debug(" size=0x%016llx (alloc=0x%016lx)\n", hose->pci_io_size, size_page); /* Establish the mapping */ diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index 1c67de52e3ce..d5e36e5dc7c2 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/pci-bridge.h> -#include <asm/pSeries_reconfig.h> #include <asm/ppc-pci.h> #include <asm/firmware.h> @@ -35,7 +34,7 @@ * Traverse_func that inits the PCI fields of the device node. * NOTE: this *must* be done before read/write config to the device. */ -static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) +void * __devinit update_dn_pci_info(struct device_node *dn, void *data) { struct pci_controller *phb = data; const int *type = @@ -184,29 +183,6 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev) } EXPORT_SYMBOL(fetch_dev_dn); -static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - struct device_node *np = node; - struct pci_dn *pci = NULL; - int err = NOTIFY_OK; - - switch (action) { - case PSERIES_RECONFIG_ADD: - pci = np->parent->data; - if (pci) - update_dn_pci_info(np, pci->phb); - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block pci_dn_reconfig_nb = { - .notifier_call = pci_dn_reconfig_notifier, -}; - /** * pci_devs_phb_init - Initialize phbs and pci devs under them. * @@ -223,6 +199,4 @@ void __init pci_devs_phb_init(void) /* This must be done first so the device nodes have valid pci info! */ list_for_each_entry_safe(phb, tmp, &hose_list, list_node) pci_devs_phb_init_dynamic(phb); - - pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb); } diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c new file mode 100644 index 000000000000..809fdf94b95f --- /dev/null +++ b/arch/powerpc/kernel/perf_counter.c @@ -0,0 +1,1306 @@ +/* + * Performance counter support - powerpc architecture code + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/perf_counter.h> +#include <linux/percpu.h> +#include <linux/hardirq.h> +#include <asm/reg.h> +#include <asm/pmc.h> +#include <asm/machdep.h> +#include <asm/firmware.h> +#include <asm/ptrace.h> + +struct cpu_hw_counters { + int n_counters; + int n_percpu; + int disabled; + int n_added; + int n_limited; + u8 pmcs_enabled; + struct perf_counter *counter[MAX_HWCOUNTERS]; + u64 events[MAX_HWCOUNTERS]; + unsigned int flags[MAX_HWCOUNTERS]; + unsigned long mmcr[3]; + struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; + u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; +}; +DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters); + +struct power_pmu *ppmu; + +/* + * Normally, to ignore kernel events we set the FCS (freeze counters + * in supervisor mode) bit in MMCR0, but if the kernel runs with the + * hypervisor bit set in the MSR, or if we are running on a processor + * where the hypervisor bit is forced to 1 (as on Apple G5 processors), + * then we need to use the FCHV bit to ignore kernel events. + */ +static unsigned int freeze_counters_kernel = MMCR0_FCS; + +/* + * 32-bit doesn't have MMCRA but does have an MMCR2, + * and a few other names are different. + */ +#ifdef CONFIG_PPC32 + +#define MMCR0_FCHV 0 +#define MMCR0_PMCjCE MMCR0_PMCnCE + +#define SPRN_MMCRA SPRN_MMCR2 +#define MMCRA_SAMPLE_ENABLE 0 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_set_pmu_inuse(int inuse) { } +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_read_regs(struct pt_regs *regs) { } +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return 0; +} + +#endif /* CONFIG_PPC32 */ + +/* + * Things that are specific to 64-bit implementations. + */ +#ifdef CONFIG_PPC64 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { + unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; + if (slot > 1) + return 4 * (slot - 1); + } + return 0; +} + +static inline void perf_set_pmu_inuse(int inuse) +{ + get_lppaca()->pmcregs_in_use = inuse; +} + +/* + * The user wants a data address recorded. + * If we're not doing instruction sampling, give them the SDAR + * (sampled data address). If we are doing instruction sampling, then + * only give them the SDAR if it corresponds to the instruction + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC + * bit in MMCRA. + */ +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) +{ + unsigned long mmcra = regs->dsisr; + unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? + POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + *addrp = mfspr(SPRN_SDAR); +} + +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if (TRAP(regs) != 0xf00) + return 0; /* not a PMU interrupt */ + + if (ppmu->flags & PPMU_ALT_SIPR) { + if (mmcra & POWER6_MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & POWER6_MMCRA_SIPR) ? + PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL; + } + if (mmcra & MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; +} + +/* + * Overload regs->dsisr to store MMCRA so we only need to read it once + * on each interrupt. + */ +static inline void perf_read_regs(struct pt_regs *regs) +{ + regs->dsisr = mfspr(SPRN_MMCRA); +} + +/* + * If interrupts were soft-disabled when a PMU interrupt occurs, treat + * it as an NMI. + */ +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return !regs->softe; +} + +#endif /* CONFIG_PPC64 */ + +static void perf_counter_interrupt(struct pt_regs *regs); + +void perf_counter_print_debug(void) +{ +} + +/* + * Read one performance monitor counter (PMC). + */ +static unsigned long read_pmc(int idx) +{ + unsigned long val; + + switch (idx) { + case 1: + val = mfspr(SPRN_PMC1); + break; + case 2: + val = mfspr(SPRN_PMC2); + break; + case 3: + val = mfspr(SPRN_PMC3); + break; + case 4: + val = mfspr(SPRN_PMC4); + break; + case 5: + val = mfspr(SPRN_PMC5); + break; + case 6: + val = mfspr(SPRN_PMC6); + break; +#ifdef CONFIG_PPC64 + case 7: + val = mfspr(SPRN_PMC7); + break; + case 8: + val = mfspr(SPRN_PMC8); + break; +#endif /* CONFIG_PPC64 */ + default: + printk(KERN_ERR "oops trying to read PMC%d\n", idx); + val = 0; + } + return val; +} + +/* + * Write one PMC. + */ +static void write_pmc(int idx, unsigned long val) +{ + switch (idx) { + case 1: + mtspr(SPRN_PMC1, val); + break; + case 2: + mtspr(SPRN_PMC2, val); + break; + case 3: + mtspr(SPRN_PMC3, val); + break; + case 4: + mtspr(SPRN_PMC4, val); + break; + case 5: + mtspr(SPRN_PMC5, val); + break; + case 6: + mtspr(SPRN_PMC6, val); + break; +#ifdef CONFIG_PPC64 + case 7: + mtspr(SPRN_PMC7, val); + break; + case 8: + mtspr(SPRN_PMC8, val); + break; +#endif /* CONFIG_PPC64 */ + default: + printk(KERN_ERR "oops trying to write PMC%d\n", idx); + } +} + +/* + * Check if a set of events can all go on the PMU at once. + * If they can't, this will look at alternative codes for the events + * and see if any combination of alternative codes is feasible. + * The feasible set is returned in event[]. + */ +static int power_check_constraints(u64 event[], unsigned int cflags[], + int n_ev) +{ + unsigned long mask, value, nv; + u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; + int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; + int i, j; + unsigned long addf = ppmu->add_fields; + unsigned long tadd = ppmu->test_adder; + + if (n_ev > ppmu->n_counter) + return -1; + + /* First see if the events will go on as-is */ + for (i = 0; i < n_ev; ++i) { + if ((cflags[i] & PPMU_LIMITED_PMC_REQD) + && !ppmu->limited_pmc_event(event[i])) { + ppmu->get_alternatives(event[i], cflags[i], + alternatives[i]); + event[i] = alternatives[i][0]; + } + if (ppmu->get_constraint(event[i], &amasks[i][0], + &avalues[i][0])) + return -1; + } + value = mask = 0; + for (i = 0; i < n_ev; ++i) { + nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf); + if ((((nv + tadd) ^ value) & mask) != 0 || + (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0) + break; + value = nv; + mask |= amasks[i][0]; + } + if (i == n_ev) + return 0; /* all OK */ + + /* doesn't work, gather alternatives... */ + if (!ppmu->get_alternatives) + return -1; + for (i = 0; i < n_ev; ++i) { + choice[i] = 0; + n_alt[i] = ppmu->get_alternatives(event[i], cflags[i], + alternatives[i]); + for (j = 1; j < n_alt[i]; ++j) + ppmu->get_constraint(alternatives[i][j], + &amasks[i][j], &avalues[i][j]); + } + + /* enumerate all possibilities and see if any will work */ + i = 0; + j = -1; + value = mask = nv = 0; + while (i < n_ev) { + if (j >= 0) { + /* we're backtracking, restore context */ + value = svalues[i]; + mask = smasks[i]; + j = choice[i]; + } + /* + * See if any alternative k for event i, + * where k > j, will satisfy the constraints. + */ + while (++j < n_alt[i]) { + nv = (value | avalues[i][j]) + + (value & avalues[i][j] & addf); + if ((((nv + tadd) ^ value) & mask) == 0 && + (((nv + tadd) ^ avalues[i][j]) + & amasks[i][j]) == 0) + break; + } + if (j >= n_alt[i]) { + /* + * No feasible alternative, backtrack + * to event i-1 and continue enumerating its + * alternatives from where we got up to. + */ + if (--i < 0) + return -1; + } else { + /* + * Found a feasible alternative for event i, + * remember where we got up to with this event, + * go on to the next event, and start with + * the first alternative for it. + */ + choice[i] = j; + svalues[i] = value; + smasks[i] = mask; + value = nv; + mask |= amasks[i][j]; + ++i; + j = -1; + } + } + + /* OK, we have a feasible combination, tell the caller the solution */ + for (i = 0; i < n_ev; ++i) + event[i] = alternatives[i][choice[i]]; + return 0; +} + +/* + * Check if newly-added counters have consistent settings for + * exclude_{user,kernel,hv} with each other and any previously + * added counters. + */ +static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], + int n_prev, int n_new) +{ + int eu = 0, ek = 0, eh = 0; + int i, n, first; + struct perf_counter *counter; + + n = n_prev + n_new; + if (n <= 1) + return 0; + + first = 1; + for (i = 0; i < n; ++i) { + if (cflags[i] & PPMU_LIMITED_PMC_OK) { + cflags[i] &= ~PPMU_LIMITED_PMC_REQD; + continue; + } + counter = ctrs[i]; + if (first) { + eu = counter->attr.exclude_user; + ek = counter->attr.exclude_kernel; + eh = counter->attr.exclude_hv; + first = 0; + } else if (counter->attr.exclude_user != eu || + counter->attr.exclude_kernel != ek || + counter->attr.exclude_hv != eh) { + return -EAGAIN; + } + } + + if (eu || ek || eh) + for (i = 0; i < n; ++i) + if (cflags[i] & PPMU_LIMITED_PMC_OK) + cflags[i] |= PPMU_LIMITED_PMC_REQD; + + return 0; +} + +static void power_pmu_read(struct perf_counter *counter) +{ + s64 val, delta, prev; + + if (!counter->hw.idx) + return; + /* + * Performance monitor interrupts come even when interrupts + * are soft-disabled, as long as interrupts are hard-enabled. + * Therefore we treat them like NMIs. + */ + do { + prev = atomic64_read(&counter->hw.prev_count); + barrier(); + val = read_pmc(counter->hw.idx); + } while (atomic64_cmpxchg(&counter->hw.prev_count, prev, val) != prev); + + /* The counters are only 32 bits wide */ + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &counter->count); + atomic64_sub(delta, &counter->hw.period_left); +} + +/* + * On some machines, PMC5 and PMC6 can't be written, don't respect + * the freeze conditions, and don't generate interrupts. This tells + * us if `counter' is using such a PMC. + */ +static int is_limited_pmc(int pmcnum) +{ + return (ppmu->flags & PPMU_LIMITED_PMC5_6) + && (pmcnum == 5 || pmcnum == 6); +} + +static void freeze_limited_counters(struct cpu_hw_counters *cpuhw, + unsigned long pmc5, unsigned long pmc6) +{ + struct perf_counter *counter; + u64 val, prev, delta; + int i; + + for (i = 0; i < cpuhw->n_limited; ++i) { + counter = cpuhw->limited_counter[i]; + if (!counter->hw.idx) + continue; + val = (counter->hw.idx == 5) ? pmc5 : pmc6; + prev = atomic64_read(&counter->hw.prev_count); + counter->hw.idx = 0; + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &counter->count); + } +} + +static void thaw_limited_counters(struct cpu_hw_counters *cpuhw, + unsigned long pmc5, unsigned long pmc6) +{ + struct perf_counter *counter; + u64 val; + int i; + + for (i = 0; i < cpuhw->n_limited; ++i) { + counter = cpuhw->limited_counter[i]; + counter->hw.idx = cpuhw->limited_hwidx[i]; + val = (counter->hw.idx == 5) ? pmc5 : pmc6; + atomic64_set(&counter->hw.prev_count, val); + perf_counter_update_userpage(counter); + } +} + +/* + * Since limited counters don't respect the freeze conditions, we + * have to read them immediately after freezing or unfreezing the + * other counters. We try to keep the values from the limited + * counters as consistent as possible by keeping the delay (in + * cycles and instructions) between freezing/unfreezing and reading + * the limited counters as small and consistent as possible. + * Therefore, if any limited counters are in use, we read them + * both, and always in the same order, to minimize variability, + * and do it inside the same asm that writes MMCR0. + */ +static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) +{ + unsigned long pmc5, pmc6; + + if (!cpuhw->n_limited) { + mtspr(SPRN_MMCR0, mmcr0); + return; + } + + /* + * Write MMCR0, then read PMC5 and PMC6 immediately. + * To ensure we don't get a performance monitor interrupt + * between writing MMCR0 and freezing/thawing the limited + * counters, we first write MMCR0 with the counter overflow + * interrupt enable bits turned off. + */ + asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5" + : "=&r" (pmc5), "=&r" (pmc6) + : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)), + "i" (SPRN_MMCR0), + "i" (SPRN_PMC5), "i" (SPRN_PMC6)); + + if (mmcr0 & MMCR0_FC) + freeze_limited_counters(cpuhw, pmc5, pmc6); + else + thaw_limited_counters(cpuhw, pmc5, pmc6); + + /* + * Write the full MMCR0 including the counter overflow interrupt + * enable bits, if necessary. + */ + if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE)) + mtspr(SPRN_MMCR0, mmcr0); +} + +/* + * Disable all counters to prevent PMU interrupts and to allow + * counters to be added or removed. + */ +void hw_perf_disable(void) +{ + struct cpu_hw_counters *cpuhw; + unsigned long flags; + + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_counters); + + if (!cpuhw->disabled) { + cpuhw->disabled = 1; + cpuhw->n_added = 0; + + /* + * Check if we ever enabled the PMU on this cpu. + */ + if (!cpuhw->pmcs_enabled) { + if (ppc_md.enable_pmcs) + ppc_md.enable_pmcs(); + cpuhw->pmcs_enabled = 1; + } + + /* + * Disable instruction sampling if it was enabled + */ + if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { + mtspr(SPRN_MMCRA, + cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mb(); + } + + /* + * Set the 'freeze counters' bit. + * The barrier is to make sure the mtspr has been + * executed and the PMU has frozen the counters + * before we return. + */ + write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC); + mb(); + } + local_irq_restore(flags); +} + +/* + * Re-enable all counters if disable == 0. + * If we were previously disabled and counters were added, then + * put the new config on the PMU. + */ +void hw_perf_enable(void) +{ + struct perf_counter *counter; + struct cpu_hw_counters *cpuhw; + unsigned long flags; + long i; + unsigned long val; + s64 left; + unsigned int hwc_index[MAX_HWCOUNTERS]; + int n_lim; + int idx; + + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_counters); + if (!cpuhw->disabled) { + local_irq_restore(flags); + return; + } + cpuhw->disabled = 0; + + /* + * If we didn't change anything, or only removed counters, + * no need to recalculate MMCR* settings and reset the PMCs. + * Just reenable the PMU with the current MMCR* settings + * (possibly updated for removal of counters). + */ + if (!cpuhw->n_added) { + mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); + if (cpuhw->n_counters == 0) + perf_set_pmu_inuse(0); + goto out_enable; + } + + /* + * Compute MMCR* values for the new set of counters + */ + if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_counters, hwc_index, + cpuhw->mmcr)) { + /* shouldn't ever get here */ + printk(KERN_ERR "oops compute_mmcr failed\n"); + goto out; + } + + /* + * Add in MMCR0 freeze bits corresponding to the + * attr.exclude_* bits for the first counter. + * We have already checked that all counters have the + * same values for these bits as the first counter. + */ + counter = cpuhw->counter[0]; + if (counter->attr.exclude_user) + cpuhw->mmcr[0] |= MMCR0_FCP; + if (counter->attr.exclude_kernel) + cpuhw->mmcr[0] |= freeze_counters_kernel; + if (counter->attr.exclude_hv) + cpuhw->mmcr[0] |= MMCR0_FCHV; + + /* + * Write the new configuration to MMCR* with the freeze + * bit set and set the hardware counters to their initial values. + * Then unfreeze the counters. + */ + perf_set_pmu_inuse(1); + mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); + mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) + | MMCR0_FC); + + /* + * Read off any pre-existing counters that need to move + * to another PMC. + */ + for (i = 0; i < cpuhw->n_counters; ++i) { + counter = cpuhw->counter[i]; + if (counter->hw.idx && counter->hw.idx != hwc_index[i] + 1) { + power_pmu_read(counter); + write_pmc(counter->hw.idx, 0); + counter->hw.idx = 0; + } + } + + /* + * Initialize the PMCs for all the new and moved counters. + */ + cpuhw->n_limited = n_lim = 0; + for (i = 0; i < cpuhw->n_counters; ++i) { + counter = cpuhw->counter[i]; + if (counter->hw.idx) + continue; + idx = hwc_index[i] + 1; + if (is_limited_pmc(idx)) { + cpuhw->limited_counter[n_lim] = counter; + cpuhw->limited_hwidx[n_lim] = idx; + ++n_lim; + continue; + } + val = 0; + if (counter->hw.sample_period) { + left = atomic64_read(&counter->hw.period_left); + if (left < 0x80000000L) + val = 0x80000000L - left; + } + atomic64_set(&counter->hw.prev_count, val); + counter->hw.idx = idx; + write_pmc(idx, val); + perf_counter_update_userpage(counter); + } + cpuhw->n_limited = n_lim; + cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE; + + out_enable: + mb(); + write_mmcr0(cpuhw, cpuhw->mmcr[0]); + + /* + * Enable instruction sampling if necessary + */ + if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { + mb(); + mtspr(SPRN_MMCRA, cpuhw->mmcr[2]); + } + + out: + local_irq_restore(flags); +} + +static int collect_events(struct perf_counter *group, int max_count, + struct perf_counter *ctrs[], u64 *events, + unsigned int *flags) +{ + int n = 0; + struct perf_counter *counter; + + if (!is_software_counter(group)) { + if (n >= max_count) + return -1; + ctrs[n] = group; + flags[n] = group->hw.counter_base; + events[n++] = group->hw.config; + } + list_for_each_entry(counter, &group->sibling_list, list_entry) { + if (!is_software_counter(counter) && + counter->state != PERF_COUNTER_STATE_OFF) { + if (n >= max_count) + return -1; + ctrs[n] = counter; + flags[n] = counter->hw.counter_base; + events[n++] = counter->hw.config; + } + } + return n; +} + +static void counter_sched_in(struct perf_counter *counter, int cpu) +{ + counter->state = PERF_COUNTER_STATE_ACTIVE; + counter->oncpu = cpu; + counter->tstamp_running += counter->ctx->time - counter->tstamp_stopped; + if (is_software_counter(counter)) + counter->pmu->enable(counter); +} + +/* + * Called to enable a whole group of counters. + * Returns 1 if the group was enabled, or -EAGAIN if it could not be. + * Assumes the caller has disabled interrupts and has + * frozen the PMU with hw_perf_save_disable. + */ +int hw_perf_group_sched_in(struct perf_counter *group_leader, + struct perf_cpu_context *cpuctx, + struct perf_counter_context *ctx, int cpu) +{ + struct cpu_hw_counters *cpuhw; + long i, n, n0; + struct perf_counter *sub; + + cpuhw = &__get_cpu_var(cpu_hw_counters); + n0 = cpuhw->n_counters; + n = collect_events(group_leader, ppmu->n_counter - n0, + &cpuhw->counter[n0], &cpuhw->events[n0], + &cpuhw->flags[n0]); + if (n < 0) + return -EAGAIN; + if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n)) + return -EAGAIN; + i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0); + if (i < 0) + return -EAGAIN; + cpuhw->n_counters = n0 + n; + cpuhw->n_added += n; + + /* + * OK, this group can go on; update counter states etc., + * and enable any software counters + */ + for (i = n0; i < n0 + n; ++i) + cpuhw->counter[i]->hw.config = cpuhw->events[i]; + cpuctx->active_oncpu += n; + n = 1; + counter_sched_in(group_leader, cpu); + list_for_each_entry(sub, &group_leader->sibling_list, list_entry) { + if (sub->state != PERF_COUNTER_STATE_OFF) { + counter_sched_in(sub, cpu); + ++n; + } + } + ctx->nr_active += n; + + return 1; +} + +/* + * Add a counter to the PMU. + * If all counters are not already frozen, then we disable and + * re-enable the PMU in order to get hw_perf_enable to do the + * actual work of reconfiguring the PMU. + */ +static int power_pmu_enable(struct perf_counter *counter) +{ + struct cpu_hw_counters *cpuhw; + unsigned long flags; + int n0; + int ret = -EAGAIN; + + local_irq_save(flags); + perf_disable(); + + /* + * Add the counter to the list (if there is room) + * and check whether the total set is still feasible. + */ + cpuhw = &__get_cpu_var(cpu_hw_counters); + n0 = cpuhw->n_counters; + if (n0 >= ppmu->n_counter) + goto out; + cpuhw->counter[n0] = counter; + cpuhw->events[n0] = counter->hw.config; + cpuhw->flags[n0] = counter->hw.counter_base; + if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1)) + goto out; + if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1)) + goto out; + + counter->hw.config = cpuhw->events[n0]; + ++cpuhw->n_counters; + ++cpuhw->n_added; + + ret = 0; + out: + perf_enable(); + local_irq_restore(flags); + return ret; +} + +/* + * Remove a counter from the PMU. + */ +static void power_pmu_disable(struct perf_counter *counter) +{ + struct cpu_hw_counters *cpuhw; + long i; + unsigned long flags; + + local_irq_save(flags); + perf_disable(); + + power_pmu_read(counter); + + cpuhw = &__get_cpu_var(cpu_hw_counters); + for (i = 0; i < cpuhw->n_counters; ++i) { + if (counter == cpuhw->counter[i]) { + while (++i < cpuhw->n_counters) + cpuhw->counter[i-1] = cpuhw->counter[i]; + --cpuhw->n_counters; + ppmu->disable_pmc(counter->hw.idx - 1, cpuhw->mmcr); + if (counter->hw.idx) { + write_pmc(counter->hw.idx, 0); + counter->hw.idx = 0; + } + perf_counter_update_userpage(counter); + break; + } + } + for (i = 0; i < cpuhw->n_limited; ++i) + if (counter == cpuhw->limited_counter[i]) + break; + if (i < cpuhw->n_limited) { + while (++i < cpuhw->n_limited) { + cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i]; + cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i]; + } + --cpuhw->n_limited; + } + if (cpuhw->n_counters == 0) { + /* disable exceptions if no counters are running */ + cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE); + } + + perf_enable(); + local_irq_restore(flags); +} + +/* + * Re-enable interrupts on a counter after they were throttled + * because they were coming too fast. + */ +static void power_pmu_unthrottle(struct perf_counter *counter) +{ + s64 val, left; + unsigned long flags; + + if (!counter->hw.idx || !counter->hw.sample_period) + return; + local_irq_save(flags); + perf_disable(); + power_pmu_read(counter); + left = counter->hw.sample_period; + counter->hw.last_period = left; + val = 0; + if (left < 0x80000000L) + val = 0x80000000L - left; + write_pmc(counter->hw.idx, val); + atomic64_set(&counter->hw.prev_count, val); + atomic64_set(&counter->hw.period_left, left); + perf_counter_update_userpage(counter); + perf_enable(); + local_irq_restore(flags); +} + +struct pmu power_pmu = { + .enable = power_pmu_enable, + .disable = power_pmu_disable, + .read = power_pmu_read, + .unthrottle = power_pmu_unthrottle, +}; + +/* + * Return 1 if we might be able to put counter on a limited PMC, + * or 0 if not. + * A counter can only go on a limited PMC if it counts something + * that a limited PMC can count, doesn't require interrupts, and + * doesn't exclude any processor mode. + */ +static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev, + unsigned int flags) +{ + int n; + u64 alt[MAX_EVENT_ALTERNATIVES]; + + if (counter->attr.exclude_user + || counter->attr.exclude_kernel + || counter->attr.exclude_hv + || counter->attr.sample_period) + return 0; + + if (ppmu->limited_pmc_event(ev)) + return 1; + + /* + * The requested event isn't on a limited PMC already; + * see if any alternative code goes on a limited PMC. + */ + if (!ppmu->get_alternatives) + return 0; + + flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD; + n = ppmu->get_alternatives(ev, flags, alt); + + return n > 0; +} + +/* + * Find an alternative event that goes on a normal PMC, if possible, + * and return the event code, or 0 if there is no such alternative. + * (Note: event code 0 is "don't count" on all machines.) + */ +static u64 normal_pmc_alternative(u64 ev, unsigned long flags) +{ + u64 alt[MAX_EVENT_ALTERNATIVES]; + int n; + + flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD); + n = ppmu->get_alternatives(ev, flags, alt); + if (!n) + return 0; + return alt[0]; +} + +/* Number of perf_counters counting hardware events */ +static atomic_t num_counters; +/* Used to avoid races in calling reserve/release_pmc_hardware */ +static DEFINE_MUTEX(pmc_reserve_mutex); + +/* + * Release the PMU if this is the last perf_counter. + */ +static void hw_perf_counter_destroy(struct perf_counter *counter) +{ + if (!atomic_add_unless(&num_counters, -1, 1)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_dec_return(&num_counters) == 0) + release_pmc_hardware(); + mutex_unlock(&pmc_reserve_mutex); + } +} + +/* + * Translate a generic cache event config to a raw event code. + */ +static int hw_perf_cache_event(u64 config, u64 *eventp) +{ + unsigned long type, op, result; + int ev; + + if (!ppmu->cache_events) + return -EINVAL; + + /* unpack config */ + type = config & 0xff; + op = (config >> 8) & 0xff; + result = (config >> 16) & 0xff; + + if (type >= PERF_COUNT_HW_CACHE_MAX || + op >= PERF_COUNT_HW_CACHE_OP_MAX || + result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ev = (*ppmu->cache_events)[type][op][result]; + if (ev == 0) + return -EOPNOTSUPP; + if (ev == -1) + return -EINVAL; + *eventp = ev; + return 0; +} + +const struct pmu *hw_perf_counter_init(struct perf_counter *counter) +{ + u64 ev; + unsigned long flags; + struct perf_counter *ctrs[MAX_HWCOUNTERS]; + u64 events[MAX_HWCOUNTERS]; + unsigned int cflags[MAX_HWCOUNTERS]; + int n; + int err; + + if (!ppmu) + return ERR_PTR(-ENXIO); + switch (counter->attr.type) { + case PERF_TYPE_HARDWARE: + ev = counter->attr.config; + if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0) + return ERR_PTR(-EOPNOTSUPP); + ev = ppmu->generic_events[ev]; + break; + case PERF_TYPE_HW_CACHE: + err = hw_perf_cache_event(counter->attr.config, &ev); + if (err) + return ERR_PTR(err); + break; + case PERF_TYPE_RAW: + ev = counter->attr.config; + break; + default: + return ERR_PTR(-EINVAL); + } + counter->hw.config_base = ev; + counter->hw.idx = 0; + + /* + * If we are not running on a hypervisor, force the + * exclude_hv bit to 0 so that we don't care what + * the user set it to. + */ + if (!firmware_has_feature(FW_FEATURE_LPAR)) + counter->attr.exclude_hv = 0; + + /* + * If this is a per-task counter, then we can use + * PM_RUN_* events interchangeably with their non RUN_* + * equivalents, e.g. PM_RUN_CYC instead of PM_CYC. + * XXX we should check if the task is an idle task. + */ + flags = 0; + if (counter->ctx->task) + flags |= PPMU_ONLY_COUNT_RUN; + + /* + * If this machine has limited counters, check whether this + * event could go on a limited counter. + */ + if (ppmu->flags & PPMU_LIMITED_PMC5_6) { + if (can_go_on_limited_pmc(counter, ev, flags)) { + flags |= PPMU_LIMITED_PMC_OK; + } else if (ppmu->limited_pmc_event(ev)) { + /* + * The requested event is on a limited PMC, + * but we can't use a limited PMC; see if any + * alternative goes on a normal PMC. + */ + ev = normal_pmc_alternative(ev, flags); + if (!ev) + return ERR_PTR(-EINVAL); + } + } + + /* + * If this is in a group, check if it can go on with all the + * other hardware counters in the group. We assume the counter + * hasn't been linked into its leader's sibling list at this point. + */ + n = 0; + if (counter->group_leader != counter) { + n = collect_events(counter->group_leader, ppmu->n_counter - 1, + ctrs, events, cflags); + if (n < 0) + return ERR_PTR(-EINVAL); + } + events[n] = ev; + ctrs[n] = counter; + cflags[n] = flags; + if (check_excludes(ctrs, cflags, n, 1)) + return ERR_PTR(-EINVAL); + if (power_check_constraints(events, cflags, n + 1)) + return ERR_PTR(-EINVAL); + + counter->hw.config = events[n]; + counter->hw.counter_base = cflags[n]; + counter->hw.last_period = counter->hw.sample_period; + atomic64_set(&counter->hw.period_left, counter->hw.last_period); + + /* + * See if we need to reserve the PMU. + * If no counters are currently in use, then we have to take a + * mutex to ensure that we don't race with another task doing + * reserve_pmc_hardware or release_pmc_hardware. + */ + err = 0; + if (!atomic_inc_not_zero(&num_counters)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_read(&num_counters) == 0 && + reserve_pmc_hardware(perf_counter_interrupt)) + err = -EBUSY; + else + atomic_inc(&num_counters); + mutex_unlock(&pmc_reserve_mutex); + } + counter->destroy = hw_perf_counter_destroy; + + if (err) + return ERR_PTR(err); + return &power_pmu; +} + +/* + * A counter has overflowed; update its count and record + * things if requested. Note that interrupts are hard-disabled + * here so there is no possibility of being interrupted. + */ +static void record_and_restart(struct perf_counter *counter, unsigned long val, + struct pt_regs *regs, int nmi) +{ + u64 period = counter->hw.sample_period; + s64 prev, delta, left; + int record = 0; + + /* we don't have to worry about interrupts here */ + prev = atomic64_read(&counter->hw.prev_count); + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &counter->count); + + /* + * See if the total period for this counter has expired, + * and update for the next period. + */ + val = 0; + left = atomic64_read(&counter->hw.period_left) - delta; + if (period) { + if (left <= 0) { + left += period; + if (left <= 0) + left = period; + record = 1; + } + if (left < 0x80000000LL) + val = 0x80000000LL - left; + } + + /* + * Finally record data if requested. + */ + if (record) { + struct perf_sample_data data = { + .regs = regs, + .addr = 0, + .period = counter->hw.last_period, + }; + + if (counter->attr.sample_type & PERF_SAMPLE_ADDR) + perf_get_data_addr(regs, &data.addr); + + if (perf_counter_overflow(counter, nmi, &data)) { + /* + * Interrupts are coming too fast - throttle them + * by setting the counter to 0, so it will be + * at least 2^30 cycles until the next interrupt + * (assuming each counter counts at most 2 counts + * per cycle). + */ + val = 0; + left = ~0ULL >> 1; + } + } + + write_pmc(counter->hw.idx, val); + atomic64_set(&counter->hw.prev_count, val); + atomic64_set(&counter->hw.period_left, left); + perf_counter_update_userpage(counter); +} + +/* + * Called from generic code to get the misc flags (i.e. processor mode) + * for an event. + */ +unsigned long perf_misc_flags(struct pt_regs *regs) +{ + u32 flags = perf_get_misc_flags(regs); + + if (flags) + return flags; + return user_mode(regs) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; +} + +/* + * Called from generic code to get the instruction pointer + * for an event. + */ +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ + unsigned long ip; + + if (TRAP(regs) != 0xf00) + return regs->nip; /* not a PMU interrupt */ + + ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs); + return ip; +} + +/* + * Performance monitor interrupt stuff + */ +static void perf_counter_interrupt(struct pt_regs *regs) +{ + int i; + struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters); + struct perf_counter *counter; + unsigned long val; + int found = 0; + int nmi; + + if (cpuhw->n_limited) + freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5), + mfspr(SPRN_PMC6)); + + perf_read_regs(regs); + + nmi = perf_intr_is_nmi(regs); + if (nmi) + nmi_enter(); + else + irq_enter(); + + for (i = 0; i < cpuhw->n_counters; ++i) { + counter = cpuhw->counter[i]; + if (!counter->hw.idx || is_limited_pmc(counter->hw.idx)) + continue; + val = read_pmc(counter->hw.idx); + if ((int)val < 0) { + /* counter has overflowed */ + found = 1; + record_and_restart(counter, val, regs, nmi); + } + } + + /* + * In case we didn't find and reset the counter that caused + * the interrupt, scan all counters and reset any that are + * negative, to avoid getting continual interrupts. + * Any that we processed in the previous loop will not be negative. + */ + if (!found) { + for (i = 0; i < ppmu->n_counter; ++i) { + if (is_limited_pmc(i + 1)) + continue; + val = read_pmc(i + 1); + if ((int)val < 0) + write_pmc(i + 1, 0); + } + } + + /* + * Reset MMCR0 to its normal value. This will set PMXE and + * clear FC (freeze counters) and PMAO (perf mon alert occurred) + * and thus allow interrupts to occur again. + * XXX might want to use MSR.PM to keep the counters frozen until + * we get back out of this interrupt. + */ + write_mmcr0(cpuhw, cpuhw->mmcr[0]); + + if (nmi) + nmi_exit(); + else + irq_exit(); +} + +void hw_perf_counter_setup(int cpu) +{ + struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu); + + memset(cpuhw, 0, sizeof(*cpuhw)); + cpuhw->mmcr[0] = MMCR0_FC; +} + +int register_power_pmu(struct power_pmu *pmu) +{ + if (ppmu) + return -EBUSY; /* something's already registered */ + + ppmu = pmu; + pr_info("%s performance monitor hardware support registered\n", + pmu->name); + +#ifdef MSR_HV + /* + * Use FCHV to ignore kernel events if MSR.HV is set. + */ + if (mfmsr() & MSR_HV) + freeze_counters_kernel = MMCR0_FCHV; +#endif /* CONFIG_PPC64 */ + + return 0; +} diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c new file mode 100644 index 000000000000..db90b0c5c27b --- /dev/null +++ b/arch/powerpc/kernel/power4-pmu.c @@ -0,0 +1,615 @@ +/* + * Performance counter support for POWER4 (GP) and POWER4+ (GQ) processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Bits in event code for POWER4 + */ +#define PM_PMC_SH 12 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_LOWER_SH 6 +#define PM_LOWER_MSK 1 +#define PM_LOWER_MSKS 0x40 +#define PM_BYTE_SH 4 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 3 +#define PM_PMCSEL_MSK 7 + +/* + * Unit code values + */ +#define PM_FPU 1 +#define PM_ISU1 2 +#define PM_IFU 3 +#define PM_IDU0 4 +#define PM_ISU1_ALT 6 +#define PM_ISU2 7 +#define PM_IFU_ALT 8 +#define PM_LSU0 9 +#define PM_LSU1 0xc +#define PM_GPS 0xf + +/* + * Bits in MMCR0 for POWER4 + */ +#define MMCR0_PMC1SEL_SH 8 +#define MMCR0_PMC2SEL_SH 1 +#define MMCR_PMCSEL_MSK 0x1f + +/* + * Bits in MMCR1 for POWER4 + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTC0SEL_SH 61 +#define MMCR1_TTM1SEL_SH 59 +#define MMCR1_TTC1SEL_SH 58 +#define MMCR1_TTM2SEL_SH 56 +#define MMCR1_TTC2SEL_SH 55 +#define MMCR1_TTM3SEL_SH 53 +#define MMCR1_TTC3SEL_SH 52 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 50 +#define MMCR1_TD_CP_DBG1SEL_SH 48 +#define MMCR1_TD_CP_DBG2SEL_SH 46 +#define MMCR1_TD_CP_DBG3SEL_SH 44 +#define MMCR1_DEBUG0SEL_SH 43 +#define MMCR1_DEBUG1SEL_SH 42 +#define MMCR1_DEBUG2SEL_SH 41 +#define MMCR1_DEBUG3SEL_SH 40 +#define MMCR1_PMC1_ADDER_SEL_SH 39 +#define MMCR1_PMC2_ADDER_SEL_SH 38 +#define MMCR1_PMC6_ADDER_SEL_SH 37 +#define MMCR1_PMC5_ADDER_SEL_SH 36 +#define MMCR1_PMC8_ADDER_SEL_SH 35 +#define MMCR1_PMC7_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC3SEL_SH 27 +#define MMCR1_PMC4SEL_SH 22 +#define MMCR1_PMC5SEL_SH 17 +#define MMCR1_PMC6SEL_SH 12 +#define MMCR1_PMC7SEL_SH 7 +#define MMCR1_PMC8SEL_SH 2 /* note bit 0 is in MMCRA for GP */ + +static short mmcr1_adder_bits[8] = { + MMCR1_PMC1_ADDER_SEL_SH, + MMCR1_PMC2_ADDER_SEL_SH, + MMCR1_PMC3_ADDER_SEL_SH, + MMCR1_PMC4_ADDER_SEL_SH, + MMCR1_PMC5_ADDER_SEL_SH, + MMCR1_PMC6_ADDER_SEL_SH, + MMCR1_PMC7_ADDER_SEL_SH, + MMCR1_PMC8_ADDER_SEL_SH +}; + +/* + * Bits in MMCRA + */ +#define MMCRA_PMC8SEL0_SH 17 /* PMC8SEL bit 0 for GP */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * |[ >[ >[ >|||[ >[ >< >< >< >< ><><><><><><><><> + * | UC1 UC2 UC3 ||| PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8 + * \SMPL ||\TTC3SEL + * |\TTC_IFU_SEL + * \TTM2SEL0 + * + * SMPL - SAMPLE_ENABLE constraint + * 56: SAMPLE_ENABLE value 0x0100_0000_0000_0000 + * + * UC1 - unit constraint 1: can't have all three of FPU/ISU1/IDU0|ISU2 + * 55: UC1 error 0x0080_0000_0000_0000 + * 54: FPU events needed 0x0040_0000_0000_0000 + * 53: ISU1 events needed 0x0020_0000_0000_0000 + * 52: IDU0|ISU2 events needed 0x0010_0000_0000_0000 + * + * UC2 - unit constraint 2: can't have all three of FPU/IFU/LSU0 + * 51: UC2 error 0x0008_0000_0000_0000 + * 50: FPU events needed 0x0004_0000_0000_0000 + * 49: IFU events needed 0x0002_0000_0000_0000 + * 48: LSU0 events needed 0x0001_0000_0000_0000 + * + * UC3 - unit constraint 3: can't have all four of LSU0/IFU/IDU0|ISU2/ISU1 + * 47: UC3 error 0x8000_0000_0000 + * 46: LSU0 events needed 0x4000_0000_0000 + * 45: IFU events needed 0x2000_0000_0000 + * 44: IDU0|ISU2 events needed 0x1000_0000_0000 + * 43: ISU1 events needed 0x0800_0000_0000 + * + * TTM2SEL0 + * 42: 0 = IDU0 events needed + * 1 = ISU2 events needed 0x0400_0000_0000 + * + * TTC_IFU_SEL + * 41: 0 = IFU.U events needed + * 1 = IFU.L events needed 0x0200_0000_0000 + * + * TTC3SEL + * 40: 0 = LSU1.U events needed + * 1 = LSU1.L events needed 0x0100_0000_0000 + * + * PS1 + * 39: PS1 error 0x0080_0000_0000 + * 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000 + * + * PS2 + * 35: PS2 error 0x0008_0000_0000 + * 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000 + * + * B0 + * 28-31: Byte 0 event source 0xf000_0000 + * 1 = FPU + * 2 = ISU1 + * 3 = IFU + * 4 = IDU0 + * 7 = ISU2 + * 9 = LSU0 + * c = LSU1 + * f = GPS + * + * B1, B2, B3 + * 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources + * + * P8 + * 15: P8 error 0x8000 + * 14-15: Count of events needing PMC8 + * + * P1..P7 + * 0-13: Count of events needing PMC1..PMC7 + * + * Note: this doesn't allow events using IFU.U to be combined with events + * using IFU.L, though that is feasible (using TTM0 and TTM2). However + * there are no listed events for IFU.L (they are debug events not + * verified for performance monitoring) so this shouldn't cause a + * problem. + */ + +static struct unitinfo { + unsigned long value, mask; + int unit; + int lowerbit; +} p4_unitinfo[16] = { + [PM_FPU] = { 0x44000000000000ul, 0x88000000000000ul, PM_FPU, 0 }, + [PM_ISU1] = { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 }, + [PM_ISU1_ALT] = + { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 }, + [PM_IFU] = { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 }, + [PM_IFU_ALT] = + { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 }, + [PM_IDU0] = { 0x10100000000000ul, 0x80840000000000ul, PM_IDU0, 1 }, + [PM_ISU2] = { 0x10140000000000ul, 0x80840000000000ul, PM_ISU2, 0 }, + [PM_LSU0] = { 0x01400000000000ul, 0x08800000000000ul, PM_LSU0, 0 }, + [PM_LSU1] = { 0x00000000000000ul, 0x00010000000000ul, PM_LSU1, 40 }, + [PM_GPS] = { 0x00000000000000ul, 0x00000000000000ul, PM_GPS, 0 } +}; + +static unsigned char direct_marked_event[8] = { + (1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */ + (1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */ + (1<<3), /* PMC3: PM_MRK_ST_CMPL_INT */ + (1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */ + (1<<4) | (1<<5), /* PMC5: PM_MRK_GRP_TIMEO */ + (1<<3) | (1<<4) | (1<<5), + /* PMC6: PM_MRK_ST_GPS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */ + (1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */ + (1<<4), /* PMC8: PM_MRK_LSU_FIN */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int p4_marked_instr_event(u64 event) +{ + int pmc, psel, unit, byte, bit; + unsigned int mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc) { + if (direct_marked_event[pmc - 1] & (1 << psel)) + return 1; + if (psel == 0) /* add events */ + bit = (pmc <= 4)? pmc - 1: 8 - pmc; + else if (psel == 6) /* decode events */ + bit = 4; + else + return 0; + } else + bit = psel; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + mask = 0; + switch (unit) { + case PM_LSU1: + if (event & PM_LOWER_MSKS) + mask = 1 << 28; /* byte 7 bit 4 */ + else + mask = 6 << 24; /* byte 3 bits 1 and 2 */ + break; + case PM_LSU0: + /* byte 3, bit 3; byte 2 bits 0,2,3,4,5; byte 1 */ + mask = 0x083dff00; + } + return (mask >> (byte * 8 + bit)) & 1; +} + +static int p4_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, byte, unit, lower, sh; + unsigned long mask = 0, value = 0; + int grp = -1; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 8) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + grp = ((pmc - 1) >> 1) & 1; + } + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit) { + lower = (event >> PM_LOWER_SH) & PM_LOWER_MSK; + + /* + * Bus events on bytes 0 and 2 can be counted + * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8. + */ + if (!pmc) + grp = byte & 1; + + if (!p4_unitinfo[unit].unit) + return -1; + mask |= p4_unitinfo[unit].mask; + value |= p4_unitinfo[unit].value; + sh = p4_unitinfo[unit].lowerbit; + if (sh > 1) + value |= (unsigned long)lower << sh; + else if (lower != sh) + return -1; + unit = p4_unitinfo[unit].unit; + + /* Set byte lane select field */ + mask |= 0xfULL << (28 - 4 * byte); + value |= (unsigned long)unit << (28 - 4 * byte); + } + if (grp == 0) { + /* increment PMC1/2/5/6 field */ + mask |= 0x8000000000ull; + value |= 0x1000000000ull; + } else { + /* increment PMC3/4/7/8 field */ + mask |= 0x800000000ull; + value |= 0x100000000ull; + } + + /* Marked instruction events need sample_enable set */ + if (p4_marked_instr_event(event)) { + mask |= 1ull << 56; + value |= 1ull << 56; + } + + /* PMCSEL=6 decode events on byte 2 need sample_enable clear */ + if (pmc && (event & PM_PMCSEL_MSK) == 6 && byte == 2) + mask |= 1ull << 56; + + *maskp = mask; + *valp = value; + return 0; +} + +static unsigned int ppc_inst_cmpl[] = { + 0x1001, 0x4001, 0x6001, 0x7001, 0x8001 +}; + +static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, na; + + alt[0] = event; + na = 1; + + /* 2 possibilities for PM_GRP_DISP_REJECT */ + if (event == 0x8003 || event == 0x0224) { + alt[1] = event ^ (0x8003 ^ 0x0224); + return 2; + } + + /* 2 possibilities for PM_ST_MISS_L1 */ + if (event == 0x0c13 || event == 0x0c23) { + alt[1] = event ^ (0x0c13 ^ 0x0c23); + return 2; + } + + /* several possibilities for PM_INST_CMPL */ + for (i = 0; i < ARRAY_SIZE(ppc_inst_cmpl); ++i) { + if (event == ppc_inst_cmpl[i]) { + for (j = 0; j < ARRAY_SIZE(ppc_inst_cmpl); ++j) + if (j != i) + alt[na++] = ppc_inst_cmpl[j]; + break; + } + } + + return na; +} + +static int p4_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; + unsigned int pmc, unit, byte, psel, lower; + unsigned int ttm, grp; + unsigned int pmc_inuse = 0; + unsigned int pmc_grp_use[2]; + unsigned char busbyte[4]; + unsigned char unituse[16]; + unsigned int unitlower = 0; + int i; + + if (n_ev > 8) + return -1; + + /* First pass to count resource use */ + pmc_grp_use[0] = pmc_grp_use[1] = 0; + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + /* count 1/2/5/6 vs 3/4/7/8 use */ + ++pmc_grp_use[((pmc - 1) >> 1) & 1]; + } + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + lower = (event[i] >> PM_LOWER_SH) & PM_LOWER_MSK; + if (unit) { + if (!pmc) + ++pmc_grp_use[byte & 1]; + if (unit == 6 || unit == 8) + /* map alt ISU1/IFU codes: 6->2, 8->3 */ + unit = (unit >> 1) - 1; + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + lower <<= unit; + if (unituse[unit] && lower != (unitlower & lower)) + return -1; + unituse[unit] = 1; + unitlower |= lower; + } + } + if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4) + return -1; + + /* + * Assign resources and set multiplexer selects. + * + * Units 1,2,3 are on TTM0, 4,6,7 on TTM1, 8,10 on TTM2. + * Each TTMx can only select one unit, but since + * units 2 and 6 are both ISU1, and 3 and 8 are both IFU, + * we have some choices. + */ + if (unituse[2] & (unituse[1] | (unituse[3] & unituse[9]))) { + unituse[6] = 1; /* Move 2 to 6 */ + unituse[2] = 0; + } + if (unituse[3] & (unituse[1] | unituse[2])) { + unituse[8] = 1; /* Move 3 to 8 */ + unituse[3] = 0; + unitlower = (unitlower & ~8) | ((unitlower & 8) << 5); + } + /* Check only one unit per TTMx */ + if (unituse[1] + unituse[2] + unituse[3] > 1 || + unituse[4] + unituse[6] + unituse[7] > 1 || + unituse[8] + unituse[9] > 1 || + (unituse[5] | unituse[10] | unituse[11] | + unituse[13] | unituse[14])) + return -1; + + /* Set TTMxSEL fields. Note, units 1-3 => TTM0SEL codes 0-2 */ + mmcr1 |= (unsigned long)(unituse[3] * 2 + unituse[2]) + << MMCR1_TTM0SEL_SH; + mmcr1 |= (unsigned long)(unituse[7] * 3 + unituse[6] * 2) + << MMCR1_TTM1SEL_SH; + mmcr1 |= (unsigned long)unituse[9] << MMCR1_TTM2SEL_SH; + + /* Set TTCxSEL fields. */ + if (unitlower & 0xe) + mmcr1 |= 1ull << MMCR1_TTC0SEL_SH; + if (unitlower & 0xf0) + mmcr1 |= 1ull << MMCR1_TTC1SEL_SH; + if (unitlower & 0xf00) + mmcr1 |= 1ull << MMCR1_TTC2SEL_SH; + if (unitlower & 0x7000) + mmcr1 |= 1ull << MMCR1_TTC3SEL_SH; + + /* Set byte lane select fields. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit == 0xf) { + /* special case for GPS */ + mmcr1 |= 1ull << (MMCR1_DEBUG0SEL_SH - byte); + } else { + if (!unituse[unit]) + ttm = unit - 1; /* 2->1, 3->2 */ + else + ttm = unit >> 2; + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + if (!pmc) { + /* Bus event or 00xxx direct event (off or cycles) */ + if (unit) + psel |= 0x10 | ((byte & 2) << 2); + for (pmc = 0; pmc < 8; ++pmc) { + if (pmc_inuse & (1 << pmc)) + continue; + grp = (pmc >> 1) & 1; + if (unit) { + if (grp == (byte & 1)) + break; + } else if (pmc_grp_use[grp] < 4) { + ++pmc_grp_use[grp]; + break; + } + } + pmc_inuse |= 1 << pmc; + } else { + /* Direct event */ + --pmc; + if (psel == 0 && (byte & 2)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ull << mmcr1_adder_bits[pmc]; + else if (psel == 6 && byte == 3) + /* seem to need to set sample_enable here */ + mmcra |= MMCRA_SAMPLE_ENABLE; + psel |= 8; + } + if (pmc <= 1) + mmcr0 |= psel << (MMCR0_PMC1SEL_SH - 7 * pmc); + else + mmcr1 |= psel << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); + if (pmc == 7) /* PMC8 */ + mmcra |= (psel & 1) << MMCRA_PMC8SEL0_SH; + hwc[i] = pmc; + if (p4_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + } + + if (pmc_inuse & 1) + mmcr0 |= MMCR0_PMC1CE; + if (pmc_inuse & 0xfe) + mmcr0 |= MMCR0_PMCjCE; + + mmcra |= 0x2000; /* mark only one IOP per PPC instruction */ + + /* Return MMCRx values */ + mmcr[0] = mmcr0; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void p4_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + /* + * Setting the PMCxSEL field to 0 disables PMC x. + * (Note that pmc is 0-based here, not 1-based.) + */ + if (pmc <= 1) { + mmcr[0] &= ~(0x1fUL << (MMCR0_PMC1SEL_SH - 7 * pmc)); + } else { + mmcr[1] &= ~(0x1fUL << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2))); + if (pmc == 7) + mmcr[2] &= ~(1UL << MMCRA_PMC8SEL0_SH); + } +} + +static int p4_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 7, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x1001, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x8c10, /* PM_LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3c10, /* PM_LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x330, /* PM_BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x331, /* PM_BR_MPRED_CR */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x8c10, 0x3c10 }, + [C(OP_WRITE)] = { 0x7c10, 0xc13 }, + [C(OP_PREFETCH)] = { 0xc35, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0xc34, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x904 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x900 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x330, 0x331 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static struct power_pmu power4_pmu = { + .name = "POWER4/4+", + .n_counter = 8, + .max_alternatives = 5, + .add_fields = 0x0000001100005555ul, + .test_adder = 0x0011083300000000ul, + .compute_mmcr = p4_compute_mmcr, + .get_constraint = p4_get_constraint, + .get_alternatives = p4_get_alternatives, + .disable_pmc = p4_disable_pmc, + .n_generic = ARRAY_SIZE(p4_generic_events), + .generic_events = p4_generic_events, + .cache_events = &power4_cache_events, +}; + +static int init_power4_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4")) + return -ENODEV; + + return register_power_pmu(&power4_pmu); +} + +arch_initcall(init_power4_pmu); diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c new file mode 100644 index 000000000000..f4adca8e98a4 --- /dev/null +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -0,0 +1,688 @@ +/* + * Performance counter support for POWER5+/++ (not POWER5) processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3) + */ +#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 16 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_BYTE_SH 12 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 7 +#define PM_GRS_SH 8 /* Storage subsystem mux select */ +#define PM_GRS_MSK 7 +#define PM_BUSEVENT_MSK 0x80 /* Set if event uses event bus */ +#define PM_PMCSEL_MSK 0x7f + +/* Values in PM_UNIT field */ +#define PM_FPU 0 +#define PM_ISU0 1 +#define PM_IFU 2 +#define PM_ISU1 3 +#define PM_IDU 4 +#define PM_ISU0_ALT 6 +#define PM_GRS 7 +#define PM_LSU0 8 +#define PM_LSU1 0xc +#define PM_LASTUNIT 0xc + +/* + * Bits in MMCR1 for POWER5+ + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTM1SEL_SH 60 +#define MMCR1_TTM2SEL_SH 58 +#define MMCR1_TTM3SEL_SH 56 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 54 +#define MMCR1_TD_CP_DBG1SEL_SH 52 +#define MMCR1_TD_CP_DBG2SEL_SH 50 +#define MMCR1_TD_CP_DBG3SEL_SH 48 +#define MMCR1_GRS_L2SEL_SH 46 +#define MMCR1_GRS_L2SEL_MSK 3 +#define MMCR1_GRS_L3SEL_SH 44 +#define MMCR1_GRS_L3SEL_MSK 3 +#define MMCR1_GRS_MCSEL_SH 41 +#define MMCR1_GRS_MCSEL_MSK 7 +#define MMCR1_GRS_FABSEL_SH 39 +#define MMCR1_GRS_FABSEL_MSK 3 +#define MMCR1_PMC1_ADDER_SEL_SH 35 +#define MMCR1_PMC2_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC1SEL_SH 25 +#define MMCR1_PMC2SEL_SH 17 +#define MMCR1_PMC3SEL_SH 9 +#define MMCR1_PMC4SEL_SH 1 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0x7f + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * [ ><><>< ><> <><>[ > < >< >< >< ><><><><><><> + * NC G0G1G2 G3 T0T1 UC B0 B1 B2 B3 P6P5P4P3P2P1 + * + * NC - number of counters + * 51: NC error 0x0008_0000_0000_0000 + * 48-50: number of events needing PMC1-4 0x0007_0000_0000_0000 + * + * G0..G3 - GRS mux constraints + * 46-47: GRS_L2SEL value + * 44-45: GRS_L3SEL value + * 41-44: GRS_MCSEL value + * 39-40: GRS_FABSEL value + * Note that these match up with their bit positions in MMCR1 + * + * T0 - TTM0 constraint + * 36-37: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0x30_0000_0000 + * + * T1 - TTM1 constraint + * 34-35: TTM1SEL value (0=IDU, 3=GRS) 0x0c_0000_0000 + * + * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS + * 33: UC3 error 0x02_0000_0000 + * 32: FPU|IFU|ISU1 events needed 0x01_0000_0000 + * 31: ISU0 events needed 0x01_8000_0000 + * 30: IDU|GRS events needed 0x00_4000_0000 + * + * B0 + * 24-27: Byte 0 event source 0x0f00_0000 + * Encoding as for the event code + * + * B1, B2, B3 + * 20-23, 16-19, 12-15: Byte 1, 2, 3 event sources + * + * P6 + * 11: P6 error 0x800 + * 10-11: Count of events needing PMC6 + * + * P1..P5 + * 0-9: Count of events needing PMC1..PMC5 + */ + +static const int grsel_shift[8] = { + MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, + MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, + MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH +}; + +/* Masks and values for using events from the various units */ +static unsigned long unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0x3200000000ul, 0x0100000000ul }, + [PM_ISU0] = { 0x0200000000ul, 0x0080000000ul }, + [PM_ISU1] = { 0x3200000000ul, 0x3100000000ul }, + [PM_IFU] = { 0x3200000000ul, 0x2100000000ul }, + [PM_IDU] = { 0x0e00000000ul, 0x0040000000ul }, + [PM_GRS] = { 0x0e00000000ul, 0x0c40000000ul }, +}; + +static int power5p_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, byte, unit, sh; + int bit, fmask; + unsigned long mask = 0, value = 0; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + if (pmc >= 5 && !(event == 0x500009 || event == 0x600005)) + return -1; + } + if (event & PM_BUSEVENT_MSK) { + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + mask |= unit_cons[unit][0]; + value |= unit_cons[unit][1]; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + /* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */ + ++unit; + byte &= 3; + } + if (unit == PM_GRS) { + bit = event & 7; + fmask = (bit == 6)? 7: 3; + sh = grsel_shift[bit]; + mask |= (unsigned long)fmask << sh; + value |= (unsigned long)((event >> PM_GRS_SH) & fmask) + << sh; + } + /* Set byte lane select field */ + mask |= 0xfUL << (24 - 4 * byte); + value |= (unsigned long)unit << (24 - 4 * byte); + } + if (pmc < 5) { + /* need a counter from PMC1-4 set */ + mask |= 0x8000000000000ul; + value |= 0x1000000000000ul; + } + *maskp = mask; + *valp = value; + return 0; +} + +static int power5p_limited_pmc_event(u64 event) +{ + int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + + return pmc == 5 || pmc == 6; +} + +#define MAX_ALT 3 /* at most 3 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x100c0, 0x40001f }, /* PM_GCT_FULL_CYC */ + { 0x120e4, 0x400002 }, /* PM_GRP_DISP_REJECT */ + { 0x230e2, 0x323087 }, /* PM_BR_PRED_CR */ + { 0x230e3, 0x223087, 0x3230a0 }, /* PM_BR_PRED_TA */ + { 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */ + { 0x800c4, 0xc20e0 }, /* PM_DTLB_MISS */ + { 0xc50c6, 0xc60e0 }, /* PM_MRK_DTLB_MISS */ + { 0x100005, 0x600005 }, /* PM_RUN_CYC */ + { 0x100009, 0x200009 }, /* PM_INST_CMPL */ + { 0x200015, 0x300015 }, /* PM_LSU_LMQ_SRQ_EMPTY_CYC */ + { 0x300009, 0x400009 }, /* PM_INST_DISP */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(unsigned int event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static const unsigned char bytedecode_alternatives[4][4] = { + /* PMC 1 */ { 0x21, 0x23, 0x25, 0x27 }, + /* PMC 2 */ { 0x07, 0x17, 0x0e, 0x1e }, + /* PMC 3 */ { 0x20, 0x22, 0x24, 0x26 }, + /* PMC 4 */ { 0x07, 0x17, 0x0e, 0x1e } +}; + +/* + * Some direct events for decodes of event bus byte 3 have alternative + * PMCSEL values on other counters. This returns the alternative + * event code for those that do, or -1 otherwise. This also handles + * alternative PCMSEL values for add events. + */ +static s64 find_alternative_bdecode(u64 event) +{ + int pmc, altpmc, pp, j; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc == 0 || pmc > 4) + return -1; + altpmc = 5 - pmc; /* 1 <-> 4, 2 <-> 3 */ + pp = event & PM_PMCSEL_MSK; + for (j = 0; j < 4; ++j) { + if (bytedecode_alternatives[pmc - 1][j] == pp) { + return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) | + (altpmc << PM_PMC_SH) | + bytedecode_alternatives[altpmc - 1][j]; + } + } + + /* new decode alternatives for power5+ */ + if (pmc == 1 && (pp == 0x0d || pp == 0x0e)) + return event + (2 << PM_PMC_SH) + (0x2e - 0x0d); + if (pmc == 3 && (pp == 0x2e || pp == 0x2f)) + return event - (2 << PM_PMC_SH) - (0x2e - 0x0d); + + /* alternative add event encodings */ + if (pp == 0x10 || pp == 0x28) + return ((event ^ (0x10 ^ 0x28)) & ~PM_PMC_MSKS) | + (altpmc << PM_PMC_SH); + + return -1; +} + +static int power5p_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + int nlim; + s64 ae; + + alt[0] = event; + nalt = 1; + nlim = power5p_limited_pmc_event(event); + i = find_alternative(event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != event) + alt[nalt++] = ae; + nlim += power5p_limited_pmc_event(ae); + } + } else { + ae = find_alternative_bdecode(event); + if (ae > 0) + alt[nalt++] = ae; + } + + if (flags & PPMU_ONLY_COUNT_RUN) { + /* + * We're only counting in RUN state, + * so PM_CYC is equivalent to PM_RUN_CYC + * and PM_INST_CMPL === PM_RUN_INST_CMPL. + * This doesn't include alternatives that don't provide + * any extra flexibility in assigning PMCs (e.g. + * 0x100005 for PM_RUN_CYC vs. 0xf for PM_CYC). + * Note that even with these additional alternatives + * we never end up with more than 3 alternatives for any event. + */ + j = nalt; + for (i = 0; i < nalt; ++i) { + switch (alt[i]) { + case 0xf: /* PM_CYC */ + alt[j++] = 0x600005; /* PM_RUN_CYC */ + ++nlim; + break; + case 0x600005: /* PM_RUN_CYC */ + alt[j++] = 0xf; + break; + case 0x100009: /* PM_INST_CMPL */ + alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */ + ++nlim; + break; + case 0x500009: /* PM_RUN_INST_CMPL */ + alt[j++] = 0x100009; /* PM_INST_CMPL */ + alt[j++] = 0x200009; + break; + } + } + nalt = j; + } + + if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) { + /* remove the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (!power5p_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) { + /* remove all but the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (power5p_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } + + return nalt; +} + +/* + * Map of which direct events on which PMCs are marked instruction events. + * Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event. + * Bit 0 is set if it is marked for all PMCs. + * The 0x80 bit indicates a byte decode PMCSEL value. + */ +static unsigned char direct_event_is_marked[0x28] = { + 0, /* 00 */ + 0x1f, /* 01 PM_IOPS_CMPL */ + 0x2, /* 02 PM_MRK_GRP_DISP */ + 0xe, /* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */ + 0, /* 04 */ + 0x1c, /* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */ + 0x80, /* 06 */ + 0x80, /* 07 */ + 0, 0, 0,/* 08 - 0a */ + 0x18, /* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */ + 0, /* 0c */ + 0x80, /* 0d */ + 0x80, /* 0e */ + 0, /* 0f */ + 0, /* 10 */ + 0x14, /* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */ + 0, /* 12 */ + 0x10, /* 13 PM_MRK_GRP_CMPL */ + 0x1f, /* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */ + 0x2, /* 15 PM_MRK_GRP_ISSUED */ + 0x80, /* 16 */ + 0x80, /* 17 */ + 0, 0, 0, 0, 0, + 0x80, /* 1d */ + 0x80, /* 1e */ + 0, /* 1f */ + 0x80, /* 20 */ + 0x80, /* 21 */ + 0x80, /* 22 */ + 0x80, /* 23 */ + 0x80, /* 24 */ + 0x80, /* 25 */ + 0x80, /* 26 */ + 0x80, /* 27 */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power5p_marked_instr_event(u64 event) +{ + int pmc, psel; + int bit, byte, unit; + u32 mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc >= 5) + return 0; + + bit = -1; + if (psel < sizeof(direct_event_is_marked)) { + if (direct_event_is_marked[psel] & (1 << pmc)) + return 1; + if (direct_event_is_marked[psel] & 0x80) + bit = 4; + else if (psel == 0x08) + bit = pmc - 1; + else if (psel == 0x10) + bit = 4 - pmc; + else if (psel == 0x1b && (pmc == 1 || pmc == 3)) + bit = 4; + } else if ((psel & 0x48) == 0x40) { + bit = psel & 7; + } else if (psel == 0x28) { + bit = pmc - 1; + } else if (pmc == 3 && (psel == 0x2e || psel == 0x2f)) { + bit = 4; + } + + if (!(event & PM_BUSEVENT_MSK) || bit == -1) + return 0; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit == PM_LSU0) { + /* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */ + mask = 0x5dff00; + } else if (unit == PM_LSU1 && byte >= 4) { + byte -= 4; + /* byte 5 bits 6-7, byte 6 bits 0,4, byte 7 bits 0-4,6 */ + mask = 0x5f11c000; + } else + return 0; + + return (mask >> (byte * 8 + bit)) & 1; +} + +static int power5p_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; + unsigned int pmc, unit, byte, psel; + unsigned int ttm; + int i, isbus, bit, grsel; + unsigned int pmc_inuse = 0; + unsigned char busbyte[4]; + unsigned char unituse[16]; + int ttmuse; + + if (n_ev > 6) + return -1; + + /* First pass to count resource use */ + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + } + if (event[i] & PM_BUSEVENT_MSK) { + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + ++unit; + byte &= 3; + } + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + unituse[unit] = 1; + } + } + + /* + * Assign resources and set multiplexer selects. + * + * PM_ISU0 can go either on TTM0 or TTM1, but that's the only + * choice we have to deal with. + */ + if (unituse[PM_ISU0] & + (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) { + unituse[PM_ISU0_ALT] = 1; /* move ISU to TTM1 */ + unituse[PM_ISU0] = 0; + } + /* Set TTM[01]SEL fields. */ + ttmuse = 0; + for (i = PM_FPU; i <= PM_ISU1; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH; + } + ttmuse = 0; + for (; i <= PM_GRS; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH; + } + if (ttmuse > 1) + return -1; + + /* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) { + /* get ISU0 through TTM1 rather than TTM0 */ + unit = PM_ISU0_ALT; + } else if (unit == PM_LSU1 + 1) { + /* select lower word of LSU1 for this byte */ + mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte); + } + ttm = unit >> 2; + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + isbus = event[i] & PM_BUSEVENT_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + for (pmc = 0; pmc < 4; ++pmc) { + if (!(pmc_inuse & (1 << pmc))) + break; + } + if (pmc >= 4) + return -1; + pmc_inuse |= 1 << pmc; + } else if (pmc <= 4) { + /* Direct event */ + --pmc; + if (isbus && (byte & 2) && + (psel == 8 || psel == 0x10 || psel == 0x28)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc); + } else { + /* Instructions or run cycles on PMC5/6 */ + --pmc; + } + if (isbus && unit == PM_GRS) { + bit = psel & 7; + grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK; + mmcr1 |= (unsigned long)grsel << grsel_shift[bit]; + } + if (power5p_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + if ((psel & 0x58) == 0x40 && (byte & 1) != ((pmc >> 1) & 1)) + /* select alternate byte lane */ + psel |= 0x10; + if (pmc <= 3) + mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); + hwc[i] = pmc; + } + + /* Return MMCRx values */ + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void power5p_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + if (pmc <= 3) + mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power5p_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0xf, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x100009, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x1c10a8, /* LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3c1088, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x230e4, /* BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x230e5, /* BR_MPRED_CR */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x1c10a8, 0x3c1088 }, + [C(OP_WRITE)] = { 0x2c10a8, 0xc10c3 }, + [C(OP_PREFETCH)] = { 0xc70e7, -1 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0xc50c3, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0xc20e4, 0x800c4 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x800c0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x230e4, 0x230e5 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static struct power_pmu power5p_pmu = { + .name = "POWER5+/++", + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x7000000000055ul, + .test_adder = 0x3000040000000ul, + .compute_mmcr = power5p_compute_mmcr, + .get_constraint = power5p_get_constraint, + .get_alternatives = power5p_get_alternatives, + .disable_pmc = power5p_disable_pmc, + .limited_pmc_event = power5p_limited_pmc_event, + .flags = PPMU_LIMITED_PMC5_6, + .n_generic = ARRAY_SIZE(power5p_generic_events), + .generic_events = power5p_generic_events, + .cache_events = &power5p_cache_events, +}; + +static int init_power5p_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+") + && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")) + return -ENODEV; + + return register_power_pmu(&power5p_pmu); +} + +arch_initcall(init_power5p_pmu); diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c new file mode 100644 index 000000000000..29b2c6c0e83a --- /dev/null +++ b/arch/powerpc/kernel/power5-pmu.c @@ -0,0 +1,627 @@ +/* + * Performance counter support for POWER5 (not POWER5++) processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Bits in event code for POWER5 (not POWER5++) + */ +#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 16 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_BYTE_SH 12 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 7 +#define PM_GRS_SH 8 /* Storage subsystem mux select */ +#define PM_GRS_MSK 7 +#define PM_BUSEVENT_MSK 0x80 /* Set if event uses event bus */ +#define PM_PMCSEL_MSK 0x7f + +/* Values in PM_UNIT field */ +#define PM_FPU 0 +#define PM_ISU0 1 +#define PM_IFU 2 +#define PM_ISU1 3 +#define PM_IDU 4 +#define PM_ISU0_ALT 6 +#define PM_GRS 7 +#define PM_LSU0 8 +#define PM_LSU1 0xc +#define PM_LASTUNIT 0xc + +/* + * Bits in MMCR1 for POWER5 + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTM1SEL_SH 60 +#define MMCR1_TTM2SEL_SH 58 +#define MMCR1_TTM3SEL_SH 56 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 54 +#define MMCR1_TD_CP_DBG1SEL_SH 52 +#define MMCR1_TD_CP_DBG2SEL_SH 50 +#define MMCR1_TD_CP_DBG3SEL_SH 48 +#define MMCR1_GRS_L2SEL_SH 46 +#define MMCR1_GRS_L2SEL_MSK 3 +#define MMCR1_GRS_L3SEL_SH 44 +#define MMCR1_GRS_L3SEL_MSK 3 +#define MMCR1_GRS_MCSEL_SH 41 +#define MMCR1_GRS_MCSEL_MSK 7 +#define MMCR1_GRS_FABSEL_SH 39 +#define MMCR1_GRS_FABSEL_MSK 3 +#define MMCR1_PMC1_ADDER_SEL_SH 35 +#define MMCR1_PMC2_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC1SEL_SH 25 +#define MMCR1_PMC2SEL_SH 17 +#define MMCR1_PMC3SEL_SH 9 +#define MMCR1_PMC4SEL_SH 1 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0x7f + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * <><>[ ><><>< ><> [ >[ >[ >< >< >< >< ><><><><><><> + * T0T1 NC G0G1G2 G3 UC PS1PS2 B0 B1 B2 B3 P6P5P4P3P2P1 + * + * T0 - TTM0 constraint + * 54-55: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0xc0_0000_0000_0000 + * + * T1 - TTM1 constraint + * 52-53: TTM1SEL value (0=IDU, 3=GRS) 0x30_0000_0000_0000 + * + * NC - number of counters + * 51: NC error 0x0008_0000_0000_0000 + * 48-50: number of events needing PMC1-4 0x0007_0000_0000_0000 + * + * G0..G3 - GRS mux constraints + * 46-47: GRS_L2SEL value + * 44-45: GRS_L3SEL value + * 41-44: GRS_MCSEL value + * 39-40: GRS_FABSEL value + * Note that these match up with their bit positions in MMCR1 + * + * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS + * 37: UC3 error 0x20_0000_0000 + * 36: FPU|IFU|ISU1 events needed 0x10_0000_0000 + * 35: ISU0 events needed 0x08_0000_0000 + * 34: IDU|GRS events needed 0x04_0000_0000 + * + * PS1 + * 33: PS1 error 0x2_0000_0000 + * 31-32: count of events needing PMC1/2 0x1_8000_0000 + * + * PS2 + * 30: PS2 error 0x4000_0000 + * 28-29: count of events needing PMC3/4 0x3000_0000 + * + * B0 + * 24-27: Byte 0 event source 0x0f00_0000 + * Encoding as for the event code + * + * B1, B2, B3 + * 20-23, 16-19, 12-15: Byte 1, 2, 3 event sources + * + * P1..P6 + * 0-11: Count of events needing PMC1..PMC6 + */ + +static const int grsel_shift[8] = { + MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, + MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, + MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH +}; + +/* Masks and values for using events from the various units */ +static unsigned long unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0xc0002000000000ul, 0x00001000000000ul }, + [PM_ISU0] = { 0x00002000000000ul, 0x00000800000000ul }, + [PM_ISU1] = { 0xc0002000000000ul, 0xc0001000000000ul }, + [PM_IFU] = { 0xc0002000000000ul, 0x80001000000000ul }, + [PM_IDU] = { 0x30002000000000ul, 0x00000400000000ul }, + [PM_GRS] = { 0x30002000000000ul, 0x30000400000000ul }, +}; + +static int power5_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, byte, unit, sh; + int bit, fmask; + unsigned long mask = 0, value = 0; + int grp = -1; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + if (pmc <= 4) + grp = (pmc - 1) >> 1; + else if (event != 0x500009 && event != 0x600005) + return -1; + } + if (event & PM_BUSEVENT_MSK) { + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + mask |= unit_cons[unit][0]; + value |= unit_cons[unit][1]; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + /* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */ + ++unit; + byte &= 3; + } + if (unit == PM_GRS) { + bit = event & 7; + fmask = (bit == 6)? 7: 3; + sh = grsel_shift[bit]; + mask |= (unsigned long)fmask << sh; + value |= (unsigned long)((event >> PM_GRS_SH) & fmask) + << sh; + } + /* + * Bus events on bytes 0 and 2 can be counted + * on PMC1/2; bytes 1 and 3 on PMC3/4. + */ + if (!pmc) + grp = byte & 1; + /* Set byte lane select field */ + mask |= 0xfUL << (24 - 4 * byte); + value |= (unsigned long)unit << (24 - 4 * byte); + } + if (grp == 0) { + /* increment PMC1/2 field */ + mask |= 0x200000000ul; + value |= 0x080000000ul; + } else if (grp == 1) { + /* increment PMC3/4 field */ + mask |= 0x40000000ul; + value |= 0x10000000ul; + } + if (pmc < 5) { + /* need a counter from PMC1-4 set */ + mask |= 0x8000000000000ul; + value |= 0x1000000000000ul; + } + *maskp = mask; + *valp = value; + return 0; +} + +#define MAX_ALT 3 /* at most 3 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x120e4, 0x400002 }, /* PM_GRP_DISP_REJECT */ + { 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */ + { 0x100005, 0x600005 }, /* PM_RUN_CYC */ + { 0x100009, 0x200009, 0x500009 }, /* PM_INST_CMPL */ + { 0x300009, 0x400009 }, /* PM_INST_DISP */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(u64 event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static const unsigned char bytedecode_alternatives[4][4] = { + /* PMC 1 */ { 0x21, 0x23, 0x25, 0x27 }, + /* PMC 2 */ { 0x07, 0x17, 0x0e, 0x1e }, + /* PMC 3 */ { 0x20, 0x22, 0x24, 0x26 }, + /* PMC 4 */ { 0x07, 0x17, 0x0e, 0x1e } +}; + +/* + * Some direct events for decodes of event bus byte 3 have alternative + * PMCSEL values on other counters. This returns the alternative + * event code for those that do, or -1 otherwise. + */ +static s64 find_alternative_bdecode(u64 event) +{ + int pmc, altpmc, pp, j; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc == 0 || pmc > 4) + return -1; + altpmc = 5 - pmc; /* 1 <-> 4, 2 <-> 3 */ + pp = event & PM_PMCSEL_MSK; + for (j = 0; j < 4; ++j) { + if (bytedecode_alternatives[pmc - 1][j] == pp) { + return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) | + (altpmc << PM_PMC_SH) | + bytedecode_alternatives[altpmc - 1][j]; + } + } + return -1; +} + +static int power5_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + s64 ae; + + alt[0] = event; + nalt = 1; + i = find_alternative(event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != event) + alt[nalt++] = ae; + } + } else { + ae = find_alternative_bdecode(event); + if (ae > 0) + alt[nalt++] = ae; + } + return nalt; +} + +/* + * Map of which direct events on which PMCs are marked instruction events. + * Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event. + * Bit 0 is set if it is marked for all PMCs. + * The 0x80 bit indicates a byte decode PMCSEL value. + */ +static unsigned char direct_event_is_marked[0x28] = { + 0, /* 00 */ + 0x1f, /* 01 PM_IOPS_CMPL */ + 0x2, /* 02 PM_MRK_GRP_DISP */ + 0xe, /* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */ + 0, /* 04 */ + 0x1c, /* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */ + 0x80, /* 06 */ + 0x80, /* 07 */ + 0, 0, 0,/* 08 - 0a */ + 0x18, /* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */ + 0, /* 0c */ + 0x80, /* 0d */ + 0x80, /* 0e */ + 0, /* 0f */ + 0, /* 10 */ + 0x14, /* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */ + 0, /* 12 */ + 0x10, /* 13 PM_MRK_GRP_CMPL */ + 0x1f, /* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */ + 0x2, /* 15 PM_MRK_GRP_ISSUED */ + 0x80, /* 16 */ + 0x80, /* 17 */ + 0, 0, 0, 0, 0, + 0x80, /* 1d */ + 0x80, /* 1e */ + 0, /* 1f */ + 0x80, /* 20 */ + 0x80, /* 21 */ + 0x80, /* 22 */ + 0x80, /* 23 */ + 0x80, /* 24 */ + 0x80, /* 25 */ + 0x80, /* 26 */ + 0x80, /* 27 */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power5_marked_instr_event(u64 event) +{ + int pmc, psel; + int bit, byte, unit; + u32 mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc >= 5) + return 0; + + bit = -1; + if (psel < sizeof(direct_event_is_marked)) { + if (direct_event_is_marked[psel] & (1 << pmc)) + return 1; + if (direct_event_is_marked[psel] & 0x80) + bit = 4; + else if (psel == 0x08) + bit = pmc - 1; + else if (psel == 0x10) + bit = 4 - pmc; + else if (psel == 0x1b && (pmc == 1 || pmc == 3)) + bit = 4; + } else if ((psel & 0x58) == 0x40) + bit = psel & 7; + + if (!(event & PM_BUSEVENT_MSK)) + return 0; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit == PM_LSU0) { + /* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */ + mask = 0x5dff00; + } else if (unit == PM_LSU1 && byte >= 4) { + byte -= 4; + /* byte 4 bits 1,3,5,7, byte 5 bits 6-7, byte 7 bits 0-4,6 */ + mask = 0x5f00c0aa; + } else + return 0; + + return (mask >> (byte * 8 + bit)) & 1; +} + +static int power5_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; + unsigned int pmc, unit, byte, psel; + unsigned int ttm, grp; + int i, isbus, bit, grsel; + unsigned int pmc_inuse = 0; + unsigned int pmc_grp_use[2]; + unsigned char busbyte[4]; + unsigned char unituse[16]; + int ttmuse; + + if (n_ev > 6) + return -1; + + /* First pass to count resource use */ + pmc_grp_use[0] = pmc_grp_use[1] = 0; + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + /* count 1/2 vs 3/4 use */ + if (pmc <= 4) + ++pmc_grp_use[(pmc - 1) >> 1]; + } + if (event[i] & PM_BUSEVENT_MSK) { + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + ++unit; + byte &= 3; + } + if (!pmc) + ++pmc_grp_use[byte & 1]; + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + unituse[unit] = 1; + } + } + if (pmc_grp_use[0] > 2 || pmc_grp_use[1] > 2) + return -1; + + /* + * Assign resources and set multiplexer selects. + * + * PM_ISU0 can go either on TTM0 or TTM1, but that's the only + * choice we have to deal with. + */ + if (unituse[PM_ISU0] & + (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) { + unituse[PM_ISU0_ALT] = 1; /* move ISU to TTM1 */ + unituse[PM_ISU0] = 0; + } + /* Set TTM[01]SEL fields. */ + ttmuse = 0; + for (i = PM_FPU; i <= PM_ISU1; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH; + } + ttmuse = 0; + for (; i <= PM_GRS; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH; + } + if (ttmuse > 1) + return -1; + + /* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) { + /* get ISU0 through TTM1 rather than TTM0 */ + unit = PM_ISU0_ALT; + } else if (unit == PM_LSU1 + 1) { + /* select lower word of LSU1 for this byte */ + mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte); + } + ttm = unit >> 2; + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + isbus = event[i] & PM_BUSEVENT_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + for (pmc = 0; pmc < 4; ++pmc) { + if (pmc_inuse & (1 << pmc)) + continue; + grp = (pmc >> 1) & 1; + if (isbus) { + if (grp == (byte & 1)) + break; + } else if (pmc_grp_use[grp] < 2) { + ++pmc_grp_use[grp]; + break; + } + } + pmc_inuse |= 1 << pmc; + } else if (pmc <= 4) { + /* Direct event */ + --pmc; + if ((psel == 8 || psel == 0x10) && isbus && (byte & 2)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc); + } else { + /* Instructions or run cycles on PMC5/6 */ + --pmc; + } + if (isbus && unit == PM_GRS) { + bit = psel & 7; + grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK; + mmcr1 |= (unsigned long)grsel << grsel_shift[bit]; + } + if (power5_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + if (pmc <= 3) + mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); + hwc[i] = pmc; + } + + /* Return MMCRx values */ + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void power5_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + if (pmc <= 3) + mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power5_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0xf, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x100009, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x4c1090, /* LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3c1088, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x230e4, /* BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x230e5, /* BR_MPRED_CR */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x4c1090, 0x3c1088 }, + [C(OP_WRITE)] = { 0x3c1090, 0xc10c3 }, + [C(OP_PREFETCH)] = { 0xc70e7, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x3c309b }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0xc50c3, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x2c4090, 0x800c4 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x800c0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x230e4, 0x230e5 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static struct power_pmu power5_pmu = { + .name = "POWER5", + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x7000090000555ul, + .test_adder = 0x3000490000000ul, + .compute_mmcr = power5_compute_mmcr, + .get_constraint = power5_get_constraint, + .get_alternatives = power5_get_alternatives, + .disable_pmc = power5_disable_pmc, + .n_generic = ARRAY_SIZE(power5_generic_events), + .generic_events = power5_generic_events, + .cache_events = &power5_cache_events, +}; + +static int init_power5_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5")) + return -ENODEV; + + return register_power_pmu(&power5_pmu); +} + +arch_initcall(init_power5_pmu); diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c new file mode 100644 index 000000000000..09ae5bf5bda7 --- /dev/null +++ b/arch/powerpc/kernel/power6-pmu.c @@ -0,0 +1,546 @@ +/* + * Performance counter support for POWER6 processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Bits in event code for POWER6 + */ +#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0x7 +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 16 /* Unit event comes (TTMxSEL encoding) */ +#define PM_UNIT_MSK 0xf +#define PM_UNIT_MSKS (PM_UNIT_MSK << PM_UNIT_SH) +#define PM_LLAV 0x8000 /* Load lookahead match value */ +#define PM_LLA 0x4000 /* Load lookahead match enable */ +#define PM_BYTE_SH 12 /* Byte of event bus to use */ +#define PM_BYTE_MSK 3 +#define PM_SUBUNIT_SH 8 /* Subunit event comes from (NEST_SEL enc.) */ +#define PM_SUBUNIT_MSK 7 +#define PM_SUBUNIT_MSKS (PM_SUBUNIT_MSK << PM_SUBUNIT_SH) +#define PM_PMCSEL_MSK 0xff /* PMCxSEL value */ +#define PM_BUSEVENT_MSK 0xf3700 + +/* + * Bits in MMCR1 for POWER6 + */ +#define MMCR1_TTM0SEL_SH 60 +#define MMCR1_TTMSEL_SH(n) (MMCR1_TTM0SEL_SH - (n) * 4) +#define MMCR1_TTMSEL_MSK 0xf +#define MMCR1_TTMSEL(m, n) (((m) >> MMCR1_TTMSEL_SH(n)) & MMCR1_TTMSEL_MSK) +#define MMCR1_NESTSEL_SH 45 +#define MMCR1_NESTSEL_MSK 0x7 +#define MMCR1_NESTSEL(m) (((m) >> MMCR1_NESTSEL_SH) & MMCR1_NESTSEL_MSK) +#define MMCR1_PMC1_LLA (1ul << 44) +#define MMCR1_PMC1_LLA_VALUE (1ul << 39) +#define MMCR1_PMC1_ADDR_SEL (1ul << 35) +#define MMCR1_PMC1SEL_SH 24 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0xff + +/* + * Map of which direct events on which PMCs are marked instruction events. + * Indexed by PMCSEL value >> 1. + * Bottom 4 bits are a map of which PMCs are interesting, + * top 4 bits say what sort of event: + * 0 = direct marked event, + * 1 = byte decode event, + * 4 = add/and event (PMC1 -> bits 0 & 4), + * 5 = add/and event (PMC1 -> bits 1 & 5), + * 6 = add/and event (PMC1 -> bits 2 & 6), + * 7 = add/and event (PMC1 -> bits 3 & 7). + */ +static unsigned char direct_event_is_marked[0x60 >> 1] = { + 0, /* 00 */ + 0, /* 02 */ + 0, /* 04 */ + 0x07, /* 06 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */ + 0x04, /* 08 PM_MRK_DFU_FIN */ + 0x06, /* 0a PM_MRK_IFU_FIN, PM_MRK_INST_FIN */ + 0, /* 0c */ + 0, /* 0e */ + 0x02, /* 10 PM_MRK_INST_DISP */ + 0x08, /* 12 PM_MRK_LSU_DERAT_MISS */ + 0, /* 14 */ + 0, /* 16 */ + 0x0c, /* 18 PM_THRESH_TIMEO, PM_MRK_INST_FIN */ + 0x0f, /* 1a PM_MRK_INST_DISP, PM_MRK_{FXU,FPU,LSU}_FIN */ + 0x01, /* 1c PM_MRK_INST_ISSUED */ + 0, /* 1e */ + 0, /* 20 */ + 0, /* 22 */ + 0, /* 24 */ + 0, /* 26 */ + 0x15, /* 28 PM_MRK_DATA_FROM_L2MISS, PM_MRK_DATA_FROM_L3MISS */ + 0, /* 2a */ + 0, /* 2c */ + 0, /* 2e */ + 0x4f, /* 30 */ + 0x7f, /* 32 */ + 0x4f, /* 34 */ + 0x5f, /* 36 */ + 0x6f, /* 38 */ + 0x4f, /* 3a */ + 0, /* 3c */ + 0x08, /* 3e PM_MRK_INST_TIMEO */ + 0x1f, /* 40 */ + 0x1f, /* 42 */ + 0x1f, /* 44 */ + 0x1f, /* 46 */ + 0x1f, /* 48 */ + 0x1f, /* 4a */ + 0x1f, /* 4c */ + 0x1f, /* 4e */ + 0, /* 50 */ + 0x05, /* 52 PM_MRK_BR_TAKEN, PM_MRK_BR_MPRED */ + 0x1c, /* 54 PM_MRK_PTEG_FROM_L3MISS, PM_MRK_PTEG_FROM_L2MISS */ + 0x02, /* 56 PM_MRK_LD_MISS_L1 */ + 0, /* 58 */ + 0, /* 5a */ + 0, /* 5c */ + 0, /* 5e */ +}; + +/* + * Masks showing for each unit which bits are marked events. + * These masks are in LE order, i.e. 0x00000001 is byte 0, bit 0. + */ +static u32 marked_bus_events[16] = { + 0x01000000, /* direct events set 1: byte 3 bit 0 */ + 0x00010000, /* direct events set 2: byte 2 bit 0 */ + 0, 0, 0, 0, /* IDU, IFU, nest: nothing */ + 0x00000088, /* VMX set 1: byte 0 bits 3, 7 */ + 0x000000c0, /* VMX set 2: byte 0 bits 4-7 */ + 0x04010000, /* LSU set 1: byte 2 bit 0, byte 3 bit 2 */ + 0xff010000u, /* LSU set 2: byte 2 bit 0, all of byte 3 */ + 0, /* LSU set 3 */ + 0x00000010, /* VMX set 3: byte 0 bit 4 */ + 0, /* BFP set 1 */ + 0x00000022, /* BFP set 2: byte 0 bits 1, 5 */ + 0, 0 +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power6_marked_instr_event(u64 event) +{ + int pmc, psel, ptype; + int bit, byte, unit; + u32 mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = (event & PM_PMCSEL_MSK) >> 1; /* drop edge/level bit */ + if (pmc >= 5) + return 0; + + bit = -1; + if (psel < sizeof(direct_event_is_marked)) { + ptype = direct_event_is_marked[psel]; + if (pmc == 0 || !(ptype & (1 << (pmc - 1)))) + return 0; + ptype >>= 4; + if (ptype == 0) + return 1; + if (ptype == 1) + bit = 0; + else + bit = ptype ^ (pmc - 1); + } else if ((psel & 0x48) == 0x40) + bit = psel & 7; + + if (!(event & PM_BUSEVENT_MSK) || bit == -1) + return 0; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + mask = marked_bus_events[unit]; + return (mask >> (byte * 8 + bit)) & 1; +} + +/* + * Assign PMC numbers and compute MMCR1 value for a set of events + */ +static int p6_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; + int i; + unsigned int pmc, ev, b, u, s, psel; + unsigned int ttmset = 0; + unsigned int pmc_inuse = 0; + + if (n_ev > 6) + return -1; + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc_inuse & (1 << (pmc - 1))) + return -1; /* collision! */ + pmc_inuse |= 1 << (pmc - 1); + } + } + for (i = 0; i < n_ev; ++i) { + ev = event[i]; + pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + --pmc; + } else { + /* can go on any PMC; find a free one */ + for (pmc = 0; pmc < 4; ++pmc) + if (!(pmc_inuse & (1 << pmc))) + break; + if (pmc >= 4) + return -1; + pmc_inuse |= 1 << pmc; + } + hwc[i] = pmc; + psel = ev & PM_PMCSEL_MSK; + if (ev & PM_BUSEVENT_MSK) { + /* this event uses the event bus */ + b = (ev >> PM_BYTE_SH) & PM_BYTE_MSK; + u = (ev >> PM_UNIT_SH) & PM_UNIT_MSK; + /* check for conflict on this byte of event bus */ + if ((ttmset & (1 << b)) && MMCR1_TTMSEL(mmcr1, b) != u) + return -1; + mmcr1 |= (unsigned long)u << MMCR1_TTMSEL_SH(b); + ttmset |= 1 << b; + if (u == 5) { + /* Nest events have a further mux */ + s = (ev >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK; + if ((ttmset & 0x10) && + MMCR1_NESTSEL(mmcr1) != s) + return -1; + ttmset |= 0x10; + mmcr1 |= (unsigned long)s << MMCR1_NESTSEL_SH; + } + if (0x30 <= psel && psel <= 0x3d) { + /* these need the PMCx_ADDR_SEL bits */ + if (b >= 2) + mmcr1 |= MMCR1_PMC1_ADDR_SEL >> pmc; + } + /* bus select values are different for PMC3/4 */ + if (pmc >= 2 && (psel & 0x90) == 0x80) + psel ^= 0x20; + } + if (ev & PM_LLA) { + mmcr1 |= MMCR1_PMC1_LLA >> pmc; + if (ev & PM_LLAV) + mmcr1 |= MMCR1_PMC1_LLA_VALUE >> pmc; + } + if (power6_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + if (pmc < 4) + mmcr1 |= (unsigned long)psel << MMCR1_PMCSEL_SH(pmc); + } + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0xe) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +/* + * Layout of constraint bits: + * + * 0-1 add field: number of uses of PMC1 (max 1) + * 2-3, 4-5, 6-7, 8-9, 10-11: ditto for PMC2, 3, 4, 5, 6 + * 12-15 add field: number of uses of PMC1-4 (max 4) + * 16-19 select field: unit on byte 0 of event bus + * 20-23, 24-27, 28-31 ditto for bytes 1, 2, 3 + * 32-34 select field: nest (subunit) event selector + */ +static int p6_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, byte, sh, subunit; + unsigned long mask = 0, value = 0; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 4 && !(event == 0x500009 || event == 0x600005)) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + } + if (event & PM_BUSEVENT_MSK) { + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + sh = byte * 4 + (16 - PM_UNIT_SH); + mask |= PM_UNIT_MSKS << sh; + value |= (unsigned long)(event & PM_UNIT_MSKS) << sh; + if ((event & PM_UNIT_MSKS) == (5 << PM_UNIT_SH)) { + subunit = (event >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK; + mask |= (unsigned long)PM_SUBUNIT_MSK << 32; + value |= (unsigned long)subunit << 32; + } + } + if (pmc <= 4) { + mask |= 0x8000; /* add field for count of PMC1-4 uses */ + value |= 0x1000; + } + *maskp = mask; + *valp = value; + return 0; +} + +static int p6_limited_pmc_event(u64 event) +{ + int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + + return pmc == 5 || pmc == 6; +} + +#define MAX_ALT 4 /* at most 4 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x0130e8, 0x2000f6, 0x3000fc }, /* PM_PTEG_RELOAD_VALID */ + { 0x080080, 0x10000d, 0x30000c, 0x4000f0 }, /* PM_LD_MISS_L1 */ + { 0x080088, 0x200054, 0x3000f0 }, /* PM_ST_MISS_L1 */ + { 0x10000a, 0x2000f4, 0x600005 }, /* PM_RUN_CYC */ + { 0x10000b, 0x2000f5 }, /* PM_RUN_COUNT */ + { 0x10000e, 0x400010 }, /* PM_PURR */ + { 0x100010, 0x4000f8 }, /* PM_FLUSH */ + { 0x10001a, 0x200010 }, /* PM_MRK_INST_DISP */ + { 0x100026, 0x3000f8 }, /* PM_TB_BIT_TRANS */ + { 0x100054, 0x2000f0 }, /* PM_ST_FIN */ + { 0x100056, 0x2000fc }, /* PM_L1_ICACHE_MISS */ + { 0x1000f0, 0x40000a }, /* PM_INST_IMC_MATCH_CMPL */ + { 0x1000f8, 0x200008 }, /* PM_GCT_EMPTY_CYC */ + { 0x1000fc, 0x400006 }, /* PM_LSU_DERAT_MISS_CYC */ + { 0x20000e, 0x400007 }, /* PM_LSU_DERAT_MISS */ + { 0x200012, 0x300012 }, /* PM_INST_DISP */ + { 0x2000f2, 0x3000f2 }, /* PM_INST_DISP */ + { 0x2000f8, 0x300010 }, /* PM_EXT_INT */ + { 0x2000fe, 0x300056 }, /* PM_DATA_FROM_L2MISS */ + { 0x2d0030, 0x30001a }, /* PM_MRK_FPU_FIN */ + { 0x30000a, 0x400018 }, /* PM_MRK_INST_FIN */ + { 0x3000f6, 0x40000e }, /* PM_L1_DCACHE_RELOAD_VALID */ + { 0x3000fe, 0x400056 }, /* PM_DATA_FROM_L3MISS */ +}; + +/* + * This could be made more efficient with a binary search on + * a presorted list, if necessary + */ +static int find_alternatives_list(u64 event) +{ + int i, j; + unsigned int alt; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + return -1; + for (j = 0; j < MAX_ALT; ++j) { + alt = event_alternatives[i][j]; + if (!alt || event < alt) + break; + if (event == alt) + return i; + } + } + return -1; +} + +static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nlim; + unsigned int psel, pmc; + unsigned int nalt = 1; + u64 aevent; + + alt[0] = event; + nlim = p6_limited_pmc_event(event); + + /* check the alternatives table */ + i = find_alternatives_list(event); + if (i >= 0) { + /* copy out alternatives from list */ + for (j = 0; j < MAX_ALT; ++j) { + aevent = event_alternatives[i][j]; + if (!aevent) + break; + if (aevent != event) + alt[nalt++] = aevent; + nlim += p6_limited_pmc_event(aevent); + } + + } else { + /* Check for alternative ways of computing sum events */ + /* PMCSEL 0x32 counter N == PMCSEL 0x34 counter 5-N */ + psel = event & (PM_PMCSEL_MSK & ~1); /* ignore edge bit */ + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc && (psel == 0x32 || psel == 0x34)) + alt[nalt++] = ((event ^ 0x6) & ~PM_PMC_MSKS) | + ((5 - pmc) << PM_PMC_SH); + + /* PMCSEL 0x38 counter N == PMCSEL 0x3a counter N+/-2 */ + if (pmc && (psel == 0x38 || psel == 0x3a)) + alt[nalt++] = ((event ^ 0x2) & ~PM_PMC_MSKS) | + ((pmc > 2? pmc - 2: pmc + 2) << PM_PMC_SH); + } + + if (flags & PPMU_ONLY_COUNT_RUN) { + /* + * We're only counting in RUN state, + * so PM_CYC is equivalent to PM_RUN_CYC, + * PM_INST_CMPL === PM_RUN_INST_CMPL, PM_PURR === PM_RUN_PURR. + * This doesn't include alternatives that don't provide + * any extra flexibility in assigning PMCs (e.g. + * 0x10000a for PM_RUN_CYC vs. 0x1e for PM_CYC). + * Note that even with these additional alternatives + * we never end up with more than 4 alternatives for any event. + */ + j = nalt; + for (i = 0; i < nalt; ++i) { + switch (alt[i]) { + case 0x1e: /* PM_CYC */ + alt[j++] = 0x600005; /* PM_RUN_CYC */ + ++nlim; + break; + case 0x10000a: /* PM_RUN_CYC */ + alt[j++] = 0x1e; /* PM_CYC */ + break; + case 2: /* PM_INST_CMPL */ + alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */ + ++nlim; + break; + case 0x500009: /* PM_RUN_INST_CMPL */ + alt[j++] = 2; /* PM_INST_CMPL */ + break; + case 0x10000e: /* PM_PURR */ + alt[j++] = 0x4000f4; /* PM_RUN_PURR */ + break; + case 0x4000f4: /* PM_RUN_PURR */ + alt[j++] = 0x10000e; /* PM_PURR */ + break; + } + } + nalt = j; + } + + if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) { + /* remove the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (!p6_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) { + /* remove all but the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (p6_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } + + return nalt; +} + +static void p6_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + /* Set PMCxSEL to 0 to disable PMCx */ + if (pmc <= 3) + mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power6_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0x1e, + [PERF_COUNT_HW_INSTRUCTIONS] = 2, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x280030, /* LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x30000c, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x410a0, /* BR_PRED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x400052, /* BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + * The "DTLB" and "ITLB" events relate to the DERAT and IERAT. + */ +static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x80082, 0x80080 }, + [C(OP_WRITE)] = { 0x80086, 0x80088 }, + [C(OP_PREFETCH)] = { 0x810a4, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x100056 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0x4008c, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x150730, 0x250532 }, + [C(OP_WRITE)] = { 0x250432, 0x150432 }, + [C(OP_PREFETCH)] = { 0x810a6, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x20000e }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x420ce }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x430e6, 0x400052 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static struct power_pmu power6_pmu = { + .name = "POWER6", + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x1555, + .test_adder = 0x3000, + .compute_mmcr = p6_compute_mmcr, + .get_constraint = p6_get_constraint, + .get_alternatives = p6_get_alternatives, + .disable_pmc = p6_disable_pmc, + .limited_pmc_event = p6_limited_pmc_event, + .flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR, + .n_generic = ARRAY_SIZE(power6_generic_events), + .generic_events = power6_generic_events, + .cache_events = &power6_cache_events, +}; + +static int init_power6_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6")) + return -ENODEV; + + return register_power_pmu(&power6_pmu); +} + +arch_initcall(init_power6_pmu); diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c new file mode 100644 index 000000000000..5d755ef7ac8f --- /dev/null +++ b/arch/powerpc/kernel/power7-pmu.c @@ -0,0 +1,374 @@ +/* + * Performance counter support for POWER7 processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Bits in event code for POWER7 + */ +#define PM_PMC_SH 16 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 12 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_COMBINE_SH 11 /* Combined event bit */ +#define PM_COMBINE_MSK 1 +#define PM_COMBINE_MSKS 0x800 +#define PM_L2SEL_SH 8 /* L2 event select */ +#define PM_L2SEL_MSK 7 +#define PM_PMCSEL_MSK 0xff + +/* + * Bits in MMCR1 for POWER7 + */ +#define MMCR1_TTM0SEL_SH 60 +#define MMCR1_TTM1SEL_SH 56 +#define MMCR1_TTM2SEL_SH 52 +#define MMCR1_TTM3SEL_SH 48 +#define MMCR1_TTMSEL_MSK 0xf +#define MMCR1_L2SEL_SH 45 +#define MMCR1_L2SEL_MSK 7 +#define MMCR1_PMC1_COMBINE_SH 35 +#define MMCR1_PMC2_COMBINE_SH 34 +#define MMCR1_PMC3_COMBINE_SH 33 +#define MMCR1_PMC4_COMBINE_SH 32 +#define MMCR1_PMC1SEL_SH 24 +#define MMCR1_PMC2SEL_SH 16 +#define MMCR1_PMC3SEL_SH 8 +#define MMCR1_PMC4SEL_SH 0 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0xff + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * [ ><><><><><><> + * NC P6P5P4P3P2P1 + * + * NC - number of counters + * 15: NC error 0x8000 + * 12-14: number of events needing PMC1-4 0x7000 + * + * P6 + * 11: P6 error 0x800 + * 10-11: Count of events needing PMC6 + * + * P1..P5 + * 0-9: Count of events needing PMC1..PMC5 + */ + +static int power7_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, sh; + unsigned long mask = 0, value = 0; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + if (pmc >= 5 && !(event == 0x500fa || event == 0x600f4)) + return -1; + } + if (pmc < 5) { + /* need a counter from PMC1-4 set */ + mask |= 0x8000; + value |= 0x1000; + } + *maskp = mask; + *valp = value; + return 0; +} + +#define MAX_ALT 2 /* at most 2 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x200f2, 0x300f2 }, /* PM_INST_DISP */ + { 0x200f4, 0x600f4 }, /* PM_RUN_CYC */ + { 0x400fa, 0x500fa }, /* PM_RUN_INST_CMPL */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(u64 event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static s64 find_alternative_decode(u64 event) +{ + int pmc, psel; + + /* this only handles the 4x decode events */ + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if ((pmc == 2 || pmc == 4) && (psel & ~7) == 0x40) + return event - (1 << PM_PMC_SH) + 8; + if ((pmc == 1 || pmc == 3) && (psel & ~7) == 0x48) + return event + (1 << PM_PMC_SH) - 8; + return -1; +} + +static int power7_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + s64 ae; + + alt[0] = event; + nalt = 1; + i = find_alternative(event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != event) + alt[nalt++] = ae; + } + } else { + ae = find_alternative_decode(event); + if (ae > 0) + alt[nalt++] = ae; + } + + if (flags & PPMU_ONLY_COUNT_RUN) { + /* + * We're only counting in RUN state, + * so PM_CYC is equivalent to PM_RUN_CYC + * and PM_INST_CMPL === PM_RUN_INST_CMPL. + * This doesn't include alternatives that don't provide + * any extra flexibility in assigning PMCs. + */ + j = nalt; + for (i = 0; i < nalt; ++i) { + switch (alt[i]) { + case 0x1e: /* PM_CYC */ + alt[j++] = 0x600f4; /* PM_RUN_CYC */ + break; + case 0x600f4: /* PM_RUN_CYC */ + alt[j++] = 0x1e; + break; + case 0x2: /* PM_PPC_CMPL */ + alt[j++] = 0x500fa; /* PM_RUN_INST_CMPL */ + break; + case 0x500fa: /* PM_RUN_INST_CMPL */ + alt[j++] = 0x2; /* PM_PPC_CMPL */ + break; + } + } + nalt = j; + } + + return nalt; +} + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power7_marked_instr_event(u64 event) +{ + int pmc, psel; + int unit; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + psel = event & PM_PMCSEL_MSK & ~1; /* trim off edge/level bit */ + if (pmc >= 5) + return 0; + + switch (psel >> 4) { + case 2: + return pmc == 2 || pmc == 4; + case 3: + if (psel == 0x3c) + return pmc == 1; + if (psel == 0x3e) + return pmc != 2; + return 1; + case 4: + case 5: + return unit == 0xd; + case 6: + if (psel == 0x64) + return pmc >= 3; + case 8: + return unit == 0xd; + } + return 0; +} + +static int power7_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; + unsigned int pmc, unit, combine, l2sel, psel; + unsigned int pmc_inuse = 0; + int i; + + /* First pass to count resource use */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + } + } + + /* Second pass: assign PMCs, set all MMCR1 fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + combine = (event[i] >> PM_COMBINE_SH) & PM_COMBINE_MSK; + l2sel = (event[i] >> PM_L2SEL_SH) & PM_L2SEL_MSK; + psel = event[i] & PM_PMCSEL_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + for (pmc = 0; pmc < 4; ++pmc) { + if (!(pmc_inuse & (1 << pmc))) + break; + } + if (pmc >= 4) + return -1; + pmc_inuse |= 1 << pmc; + } else { + /* Direct or decoded event */ + --pmc; + } + if (pmc <= 3) { + mmcr1 |= (unsigned long) unit + << (MMCR1_TTM0SEL_SH - 4 * pmc); + mmcr1 |= (unsigned long) combine + << (MMCR1_PMC1_COMBINE_SH - pmc); + mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); + if (unit == 6) /* L2 events */ + mmcr1 |= (unsigned long) l2sel + << MMCR1_L2SEL_SH; + } + if (power7_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + hwc[i] = pmc; + } + + /* Return MMCRx values */ + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + if (pmc <= 3) + mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power7_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0x1e, + [PERF_COUNT_HW_INSTRUCTIONS] = 2, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU*/ + [PERF_COUNT_HW_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068, /* BRU_FIN */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6, /* BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x400f0, 0xc880 }, + [C(OP_WRITE)] = { 0, 0x300f0 }, + [C(OP_PREFETCH)] = { 0xd8b8, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x200fc }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0x408a, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x6080, 0x6084 }, + [C(OP_WRITE)] = { 0x6082, 0x6086 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x300fc }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x400fc }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x10068, 0x400f6 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static struct power_pmu power7_pmu = { + .name = "POWER7", + .n_counter = 6, + .max_alternatives = MAX_ALT + 1, + .add_fields = 0x1555ul, + .test_adder = 0x3000ul, + .compute_mmcr = power7_compute_mmcr, + .get_constraint = power7_get_constraint, + .get_alternatives = power7_get_alternatives, + .disable_pmc = power7_disable_pmc, + .n_generic = ARRAY_SIZE(power7_generic_events), + .generic_events = power7_generic_events, + .cache_events = &power7_cache_events, +}; + +static int init_power7_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7")) + return -ENODEV; + + return register_power_pmu(&power7_pmu); +} + +arch_initcall(init_power7_pmu); diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c new file mode 100644 index 000000000000..6637c87fe70e --- /dev/null +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -0,0 +1,499 @@ +/* + * Performance counter support for PPC970-family processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Bits in event code for PPC970 + */ +#define PM_PMC_SH 12 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_SPCSEL_SH 6 +#define PM_SPCSEL_MSK 3 +#define PM_BYTE_SH 4 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 3 +#define PM_PMCSEL_MSK 0xf + +/* Values in PM_UNIT field */ +#define PM_NONE 0 +#define PM_FPU 1 +#define PM_VPU 2 +#define PM_ISU 3 +#define PM_IFU 4 +#define PM_IDU 5 +#define PM_STS 6 +#define PM_LSU0 7 +#define PM_LSU1U 8 +#define PM_LSU1L 9 +#define PM_LASTUNIT 9 + +/* + * Bits in MMCR0 for PPC970 + */ +#define MMCR0_PMC1SEL_SH 8 +#define MMCR0_PMC2SEL_SH 1 +#define MMCR_PMCSEL_MSK 0x1f + +/* + * Bits in MMCR1 for PPC970 + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTM1SEL_SH 59 +#define MMCR1_TTM3SEL_SH 53 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 50 +#define MMCR1_TD_CP_DBG1SEL_SH 48 +#define MMCR1_TD_CP_DBG2SEL_SH 46 +#define MMCR1_TD_CP_DBG3SEL_SH 44 +#define MMCR1_PMC1_ADDER_SEL_SH 39 +#define MMCR1_PMC2_ADDER_SEL_SH 38 +#define MMCR1_PMC6_ADDER_SEL_SH 37 +#define MMCR1_PMC5_ADDER_SEL_SH 36 +#define MMCR1_PMC8_ADDER_SEL_SH 35 +#define MMCR1_PMC7_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC3SEL_SH 27 +#define MMCR1_PMC4SEL_SH 22 +#define MMCR1_PMC5SEL_SH 17 +#define MMCR1_PMC6SEL_SH 12 +#define MMCR1_PMC7SEL_SH 7 +#define MMCR1_PMC8SEL_SH 2 + +static short mmcr1_adder_bits[8] = { + MMCR1_PMC1_ADDER_SEL_SH, + MMCR1_PMC2_ADDER_SEL_SH, + MMCR1_PMC3_ADDER_SEL_SH, + MMCR1_PMC4_ADDER_SEL_SH, + MMCR1_PMC5_ADDER_SEL_SH, + MMCR1_PMC6_ADDER_SEL_SH, + MMCR1_PMC7_ADDER_SEL_SH, + MMCR1_PMC8_ADDER_SEL_SH +}; + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * <><><>[ >[ >[ >< >< >< >< ><><><><><><><><> + * SPT0T1 UC PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8 + * + * SP - SPCSEL constraint + * 48-49: SPCSEL value 0x3_0000_0000_0000 + * + * T0 - TTM0 constraint + * 46-47: TTM0SEL value (0=FPU, 2=IFU, 3=VPU) 0xC000_0000_0000 + * + * T1 - TTM1 constraint + * 44-45: TTM1SEL value (0=IDU, 3=STS) 0x3000_0000_0000 + * + * UC - unit constraint: can't have all three of FPU|IFU|VPU, ISU, IDU|STS + * 43: UC3 error 0x0800_0000_0000 + * 42: FPU|IFU|VPU events needed 0x0400_0000_0000 + * 41: ISU events needed 0x0200_0000_0000 + * 40: IDU|STS events needed 0x0100_0000_0000 + * + * PS1 + * 39: PS1 error 0x0080_0000_0000 + * 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000 + * + * PS2 + * 35: PS2 error 0x0008_0000_0000 + * 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000 + * + * B0 + * 28-31: Byte 0 event source 0xf000_0000 + * Encoding as for the event code + * + * B1, B2, B3 + * 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources + * + * P1 + * 15: P1 error 0x8000 + * 14-15: Count of events needing PMC1 + * + * P2..P8 + * 0-13: Count of events needing PMC2..PMC8 + */ + +static unsigned char direct_marked_event[8] = { + (1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */ + (1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */ + (1<<3) | (1<<5), /* PMC3: PM_MRK_ST_CMPL_INT, PM_MRK_VMX_FIN */ + (1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */ + (1<<4) | (1<<5), /* PMC5: PM_GRP_MRK, PM_MRK_GRP_TIMEO */ + (1<<3) | (1<<4) | (1<<5), + /* PMC6: PM_MRK_ST_STS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */ + (1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */ + (1<<4) /* PMC8: PM_MRK_LSU_FIN */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int p970_marked_instr_event(u64 event) +{ + int pmc, psel, unit, byte, bit; + unsigned int mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc) { + if (direct_marked_event[pmc - 1] & (1 << psel)) + return 1; + if (psel == 0) /* add events */ + bit = (pmc <= 4)? pmc - 1: 8 - pmc; + else if (psel == 7 || psel == 13) /* decode events */ + bit = 4; + else + return 0; + } else + bit = psel; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + mask = 0; + switch (unit) { + case PM_VPU: + mask = 0x4c; /* byte 0 bits 2,3,6 */ + case PM_LSU0: + /* byte 2 bits 0,2,3,4,6; all of byte 1 */ + mask = 0x085dff00; + case PM_LSU1L: + mask = 0x50 << 24; /* byte 3 bits 4,6 */ + break; + } + return (mask >> (byte * 8 + bit)) & 1; +} + +/* Masks and values for using events from the various units */ +static unsigned long unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0xc80000000000ull, 0x040000000000ull }, + [PM_VPU] = { 0xc80000000000ull, 0xc40000000000ull }, + [PM_ISU] = { 0x080000000000ull, 0x020000000000ull }, + [PM_IFU] = { 0xc80000000000ull, 0x840000000000ull }, + [PM_IDU] = { 0x380000000000ull, 0x010000000000ull }, + [PM_STS] = { 0x380000000000ull, 0x310000000000ull }, +}; + +static int p970_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, byte, unit, sh, spcsel; + unsigned long mask = 0, value = 0; + int grp = -1; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 8) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + grp = ((pmc - 1) >> 1) & 1; + } + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit) { + if (unit > PM_LASTUNIT) + return -1; + mask |= unit_cons[unit][0]; + value |= unit_cons[unit][1]; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + /* + * Bus events on bytes 0 and 2 can be counted + * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8. + */ + if (!pmc) + grp = byte & 1; + /* Set byte lane select field */ + mask |= 0xfULL << (28 - 4 * byte); + value |= (unsigned long)unit << (28 - 4 * byte); + } + if (grp == 0) { + /* increment PMC1/2/5/6 field */ + mask |= 0x8000000000ull; + value |= 0x1000000000ull; + } else if (grp == 1) { + /* increment PMC3/4/7/8 field */ + mask |= 0x800000000ull; + value |= 0x100000000ull; + } + spcsel = (event >> PM_SPCSEL_SH) & PM_SPCSEL_MSK; + if (spcsel) { + mask |= 3ull << 48; + value |= (unsigned long)spcsel << 48; + } + *maskp = mask; + *valp = value; + return 0; +} + +static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + alt[0] = event; + + /* 2 alternatives for LSU empty */ + if (event == 0x2002 || event == 0x3002) { + alt[1] = event ^ 0x1000; + return 2; + } + + return 1; +} + +static int p970_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; + unsigned int pmc, unit, byte, psel; + unsigned int ttm, grp; + unsigned int pmc_inuse = 0; + unsigned int pmc_grp_use[2]; + unsigned char busbyte[4]; + unsigned char unituse[16]; + unsigned char unitmap[] = { 0, 0<<3, 3<<3, 1<<3, 2<<3, 0|4, 3|4 }; + unsigned char ttmuse[2]; + unsigned char pmcsel[8]; + int i; + int spcsel; + + if (n_ev > 8) + return -1; + + /* First pass to count resource use */ + pmc_grp_use[0] = pmc_grp_use[1] = 0; + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + /* count 1/2/5/6 vs 3/4/7/8 use */ + ++pmc_grp_use[((pmc - 1) >> 1) & 1]; + } + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit) { + if (unit > PM_LASTUNIT) + return -1; + if (!pmc) + ++pmc_grp_use[byte & 1]; + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + unituse[unit] = 1; + } + } + if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4) + return -1; + + /* + * Assign resources and set multiplexer selects. + * + * PM_ISU can go either on TTM0 or TTM1, but that's the only + * choice we have to deal with. + */ + if (unituse[PM_ISU] & + (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_VPU])) + unitmap[PM_ISU] = 2 | 4; /* move ISU to TTM1 */ + /* Set TTM[01]SEL fields. */ + ttmuse[0] = ttmuse[1] = 0; + for (i = PM_FPU; i <= PM_STS; ++i) { + if (!unituse[i]) + continue; + ttm = unitmap[i]; + ++ttmuse[(ttm >> 2) & 1]; + mmcr1 |= (unsigned long)(ttm & ~4) << MMCR1_TTM1SEL_SH; + } + /* Check only one unit per TTMx */ + if (ttmuse[0] > 1 || ttmuse[1] > 1) + return -1; + + /* Set byte lane select fields and TTM3SEL. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit <= PM_STS) + ttm = (unitmap[unit] >> 2) & 1; + else if (unit == PM_LSU0) + ttm = 2; + else { + ttm = 3; + if (unit == PM_LSU1L && byte >= 2) + mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); + } + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + memset(pmcsel, 0x8, sizeof(pmcsel)); /* 8 means don't count */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + if (unit) + psel |= 0x10 | ((byte & 2) << 2); + else + psel |= 8; + for (pmc = 0; pmc < 8; ++pmc) { + if (pmc_inuse & (1 << pmc)) + continue; + grp = (pmc >> 1) & 1; + if (unit) { + if (grp == (byte & 1)) + break; + } else if (pmc_grp_use[grp] < 4) { + ++pmc_grp_use[grp]; + break; + } + } + pmc_inuse |= 1 << pmc; + } else { + /* Direct event */ + --pmc; + if (psel == 0 && (byte & 2)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ull << mmcr1_adder_bits[pmc]; + } + pmcsel[pmc] = psel; + hwc[i] = pmc; + spcsel = (event[i] >> PM_SPCSEL_SH) & PM_SPCSEL_MSK; + mmcr1 |= spcsel; + if (p970_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + } + for (pmc = 0; pmc < 2; ++pmc) + mmcr0 |= pmcsel[pmc] << (MMCR0_PMC1SEL_SH - 7 * pmc); + for (; pmc < 8; ++pmc) + mmcr1 |= (unsigned long)pmcsel[pmc] + << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); + if (pmc_inuse & 1) + mmcr0 |= MMCR0_PMC1CE; + if (pmc_inuse & 0xfe) + mmcr0 |= MMCR0_PMCjCE; + + mmcra |= 0x2000; /* mark only one IOP per PPC instruction */ + + /* Return MMCRx values */ + mmcr[0] = mmcr0; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void p970_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + int shift, i; + + if (pmc <= 1) { + shift = MMCR0_PMC1SEL_SH - 7 * pmc; + i = 0; + } else { + shift = MMCR1_PMC3SEL_SH - 5 * (pmc - 2); + i = 1; + } + /* + * Setting the PMCxSEL field to 0x08 disables PMC x. + */ + mmcr[i] = (mmcr[i] & ~(0x1fUL << shift)) | (0x08UL << shift); +} + +static int ppc970_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 7, + [PERF_COUNT_HW_INSTRUCTIONS] = 1, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x8810, /* PM_LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3810, /* PM_LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x431, /* PM_BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x327, /* PM_GRP_BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x8810, 0x3810 }, + [C(OP_WRITE)] = { 0x7810, 0x813 }, + [C(OP_PREFETCH)] = { 0x731, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0x733, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x704 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x700 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x431, 0x327 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static struct power_pmu ppc970_pmu = { + .name = "PPC970/FX/MP", + .n_counter = 8, + .max_alternatives = 2, + .add_fields = 0x001100005555ull, + .test_adder = 0x013300000000ull, + .compute_mmcr = p970_compute_mmcr, + .get_constraint = p970_get_constraint, + .get_alternatives = p970_get_alternatives, + .disable_pmc = p970_disable_pmc, + .n_generic = ARRAY_SIZE(ppc970_generic_events), + .generic_events = ppc970_generic_events, + .cache_events = &ppc970_cache_events, +}; + +static int init_ppc970_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970") + && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")) + return -ENODEV; + + return register_power_pmu(&ppc970_pmu); +} + +arch_initcall(init_ppc970_pmu); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7b44a33f03c2..3e7135bbe40f 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -650,7 +650,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, p->thread.ksp_limit = (unsigned long)task_stack_page(p) + _ALIGN_UP(sizeof(struct thread_info), 16); -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_STD_MMU_64 if (cpu_has_feature(CPU_FTR_SLB)) { unsigned long sp_vsid; unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index ce01ff2474da..d4405b95bfaa 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -585,7 +585,7 @@ static void __init check_cpu_pa_features(unsigned long node) ibm_pa_features, ARRAY_SIZE(ibm_pa_features)); } -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_STD_MMU_64 static void __init check_cpu_slb_size(unsigned long node) { u32 *slb_size_ptr; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 2f0e64b53642..a538824616fd 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -44,10 +44,7 @@ #include <asm/sections.h> #include <asm/machdep.h> -#ifdef CONFIG_LOGO_LINUX_CLUT224 #include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif /* * Properties whose value is longer than this get excluded from our @@ -1950,8 +1947,47 @@ static void __init fixup_device_tree_maple(void) prom_setprop(isa, name, "ranges", isa_ranges, sizeof(isa_ranges)); } + +#define CPC925_MC_START 0xf8000000 +#define CPC925_MC_LENGTH 0x1000000 +/* The values for memory-controller don't have right number of cells */ +static void __init fixup_device_tree_maple_memory_controller(void) +{ + phandle mc; + u32 mc_reg[4]; + char *name = "/hostbridge@f8000000"; + struct prom_t *_prom = &RELOC(prom); + u32 ac, sc; + + mc = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(mc)) + return; + + if (prom_getproplen(mc, "reg") != 8) + return; + + prom_getprop(_prom->root, "#address-cells", &ac, sizeof(ac)); + prom_getprop(_prom->root, "#size-cells", &sc, sizeof(sc)); + if ((ac != 2) || (sc != 2)) + return; + + if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR) + return; + + if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH) + return; + + prom_printf("Fixing up bogus hostbridge on Maple...\n"); + + mc_reg[0] = 0x0; + mc_reg[1] = CPC925_MC_START; + mc_reg[2] = 0x0; + mc_reg[3] = CPC925_MC_LENGTH; + prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg)); +} #else #define fixup_device_tree_maple() +#define fixup_device_tree_maple_memory_controller() #endif #ifdef CONFIG_PPC_CHRP @@ -2192,6 +2228,7 @@ static void __init fixup_device_tree_efika(void) static void __init fixup_device_tree(void) { fixup_device_tree_maple(); + fixup_device_tree_maple_memory_controller(); fixup_device_tree_chrp(); fixup_device_tree_pmac(); fixup_device_tree_efika(); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 3635be61f899..9fa2c7dcd05a 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -704,15 +704,34 @@ void user_enable_single_step(struct task_struct *task) if (regs != NULL) { #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + task->thread.dbcr0 &= ~DBCR0_BT; task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; #else + regs->msr &= ~MSR_BE; regs->msr |= MSR_SE; #endif } set_tsk_thread_flag(task, TIF_SINGLESTEP); } +void user_enable_block_step(struct task_struct *task) +{ + struct pt_regs *regs = task->thread.regs; + + if (regs != NULL) { +#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + task->thread.dbcr0 &= ~DBCR0_IC; + task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; + regs->msr |= MSR_DE; +#else + regs->msr &= ~MSR_SE; + regs->msr |= MSR_BE; +#endif + } + set_tsk_thread_flag(task, TIF_SINGLESTEP); +} + void user_disable_single_step(struct task_struct *task) { struct pt_regs *regs = task->thread.regs; @@ -726,10 +745,10 @@ void user_disable_single_step(struct task_struct *task) if (regs != NULL) { #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) - task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM); + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); regs->msr &= ~MSR_DE; #else - regs->msr &= ~MSR_SE; + regs->msr &= ~(MSR_SE | MSR_BE); #endif } clear_tsk_thread_flag(task, TIF_SINGLESTEP); diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 8869001ab5d7..54e66da8f743 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -93,10 +93,7 @@ static int rtas_pci_read_config(struct pci_bus *bus, { struct device_node *busdn, *dn; - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ + busdn = pci_bus_to_OF_node(bus); /* Search only direct children of the bus */ for (dn = busdn->child; dn; dn = dn->sibling) { @@ -140,10 +137,7 @@ static int rtas_pci_write_config(struct pci_bus *bus, { struct device_node *busdn, *dn; - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ + busdn = pci_bus_to_OF_node(bus); /* Search only direct children of the bus */ for (dn = busdn->child; dn; dn = dn->sibling) { diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9e1ca745d8f0..1d154248cf40 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -39,6 +39,7 @@ #include <asm/serial.h> #include <asm/udbg.h> #include <asm/mmu_context.h> +#include <asm/swiotlb.h> #include "setup.h" @@ -332,6 +333,11 @@ void __init setup_arch(char **cmdline_p) ppc_md.setup_arch(); if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); +#ifdef CONFIG_SWIOTLB + if (ppc_swiotlb_enable) + swiotlb_init(); +#endif + paging_init(); /* Initialize the MMU context management stuff */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index c410c606955d..1f6816003ebe 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -61,6 +61,7 @@ #include <asm/xmon.h> #include <asm/udbg.h> #include <asm/kexec.h> +#include <asm/swiotlb.h> #include "setup.h" @@ -417,12 +418,14 @@ void __init setup_system(void) if (ppc64_caches.iline_size != 0x80) printk("ppc64_caches.icache_line_size = 0x%x\n", ppc64_caches.iline_size); +#ifdef CONFIG_PPC_STD_MMU_64 if (htab_address) printk("htab_address = 0x%p\n", htab_address); printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); +#endif /* CONFIG_PPC_STD_MMU_64 */ if (PHYSICAL_START > 0) - printk("physical_start = 0x%lx\n", - PHYSICAL_START); + printk("physical_start = 0x%llx\n", + (unsigned long long)PHYSICAL_START); printk("-----------------------------------------------------\n"); DBG(" <- setup_system()\n"); @@ -511,8 +514,9 @@ void __init setup_arch(char **cmdline_p) irqstack_early_init(); emergency_stack_init(); +#ifdef CONFIG_PPC_STD_MMU_64 stabs_alloc(); - +#endif /* set up the bootmem stuff with available memory */ do_init_bootmem(); sparse_init(); @@ -524,6 +528,11 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.setup_arch) ppc_md.setup_arch(); +#ifdef CONFIG_SWIOTLB + if (ppc_swiotlb_enable) + swiotlb_init(); +#endif + paging_init(); ppc64_boot_msg(0x15, "Setup Done"); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 48571ac56fb7..eae4511ceeac 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -52,6 +52,8 @@ #include <linux/jiffies.h> #include <linux/posix-timers.h> #include <linux/irq.h> +#include <linux/delay.h> +#include <linux/perf_counter.h> #include <asm/io.h> #include <asm/processor.h> @@ -109,7 +111,7 @@ static void decrementer_set_mode(enum clock_event_mode mode, static struct clock_event_device decrementer_clockevent = { .name = "decrementer", .rating = 200, - .shift = 16, + .shift = 0, /* To be filled in */ .mult = 0, /* To be filled in */ .irq = 0, .set_next_event = decrementer_set_next_event, @@ -524,6 +526,26 @@ void __init iSeries_time_init_early(void) } #endif /* CONFIG_PPC_ISERIES */ +#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32) +DEFINE_PER_CPU(u8, perf_counter_pending); + +void set_perf_counter_pending(void) +{ + get_cpu_var(perf_counter_pending) = 1; + set_dec(1); + put_cpu_var(perf_counter_pending); +} + +#define test_perf_counter_pending() __get_cpu_var(perf_counter_pending) +#define clear_perf_counter_pending() __get_cpu_var(perf_counter_pending) = 0 + +#else /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ + +#define test_perf_counter_pending() 0 +#define clear_perf_counter_pending() + +#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ + /* * For iSeries shared processors, we have to let the hypervisor * set the hardware decrementer. We set a virtual decrementer @@ -550,6 +572,10 @@ void timer_interrupt(struct pt_regs * regs) set_dec(DECREMENTER_MAX); #ifdef CONFIG_PPC32 + if (test_perf_counter_pending()) { + clear_perf_counter_pending(); + perf_counter_do_pending(); + } if (atomic_read(&ppc_n_lost_interrupts) != 0) do_IRQ(regs); #endif @@ -843,6 +869,22 @@ static void decrementer_set_mode(enum clock_event_mode mode, decrementer_set_next_event(DECREMENTER_MAX, dev); } +static void __init setup_clockevent_multiplier(unsigned long hz) +{ + u64 mult, shift = 32; + + while (1) { + mult = div_sc(hz, NSEC_PER_SEC, shift); + if (mult && (mult >> 32UL) == 0UL) + break; + + shift--; + } + + decrementer_clockevent.shift = shift; + decrementer_clockevent.mult = mult; +} + static void register_decrementer_clockevent(int cpu) { struct clock_event_device *dec = &per_cpu(decrementers, cpu).event; @@ -860,8 +902,7 @@ static void __init init_decrementer_clockevent(void) { int cpu = smp_processor_id(); - decrementer_clockevent.mult = div_sc(ppc_tb_freq, NSEC_PER_SEC, - decrementer_clockevent.shift); + setup_clockevent_multiplier(ppc_tb_freq); decrementer_clockevent.max_delta_ns = clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent); decrementer_clockevent.min_delta_ns = @@ -1128,6 +1169,15 @@ void div128_by_32(u64 dividend_high, u64 dividend_low, } +/* We don't need to calibrate delay, we use the CPU timebase for that */ +void calibrate_delay(void) +{ + /* Some generic code (such as spinlock debug) use loops_per_jiffy + * as the number of __delay(1) in a jiffy, so make it so + */ + loops_per_jiffy = tb_ticks_per_jiffy; +} + static int __init rtc_init(void) { struct platform_device *pdev; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 678fbff0d206..6f0ae1a9bfae 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -33,7 +33,9 @@ #include <linux/backlight.h> #include <linux/bug.h> #include <linux/kdebug.h> +#include <linux/debugfs.h> +#include <asm/emulated_ops.h> #include <asm/pgtable.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -757,36 +759,44 @@ static int emulate_instruction(struct pt_regs *regs) /* Emulate the mfspr rD, PVR. */ if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) { + PPC_WARN_EMULATED(mfpvr); rd = (instword >> 21) & 0x1f; regs->gpr[rd] = mfspr(SPRN_PVR); return 0; } /* Emulating the dcba insn is just a no-op. */ - if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) + if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) { + PPC_WARN_EMULATED(dcba); return 0; + } /* Emulate the mcrxr insn. */ if ((instword & PPC_INST_MCRXR_MASK) == PPC_INST_MCRXR) { int shift = (instword >> 21) & 0x1c; unsigned long msk = 0xf0000000UL >> shift; + PPC_WARN_EMULATED(mcrxr); regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk); regs->xer &= ~0xf0000000UL; return 0; } /* Emulate load/store string insn. */ - if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) + if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) { + PPC_WARN_EMULATED(string); return emulate_string_inst(regs, instword); + } /* Emulate the popcntb (Population Count Bytes) instruction. */ if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) { + PPC_WARN_EMULATED(popcntb); return emulate_popcntb_inst(regs, instword); } /* Emulate isel (Integer Select) instruction */ if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) { + PPC_WARN_EMULATED(isel); return emulate_isel(regs, instword); } @@ -984,6 +994,8 @@ void SoftwareEmulation(struct pt_regs *regs) #ifdef CONFIG_MATH_EMULATION errcode = do_mathemu(regs); + if (errcode >= 0) + PPC_WARN_EMULATED(math); switch (errcode) { case 0: @@ -1005,6 +1017,9 @@ void SoftwareEmulation(struct pt_regs *regs) #elif defined(CONFIG_8XX_MINIMAL_FPEMU) errcode = Soft_emulate_8xx(regs); + if (errcode >= 0) + PPC_WARN_EMULATED(8xx); + switch (errcode) { case 0: emulate_single_step(regs); @@ -1026,7 +1041,34 @@ void SoftwareEmulation(struct pt_regs *regs) void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) { - if (debug_status & DBSR_IC) { /* instruction completion */ + /* Hack alert: On BookE, Branch Taken stops on the branch itself, while + * on server, it stops on the target of the branch. In order to simulate + * the server behaviour, we thus restart right away with a single step + * instead of stopping here when hitting a BT + */ + if (debug_status & DBSR_BT) { + regs->msr &= ~MSR_DE; + + /* Disable BT */ + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_BT); + /* Clear the BT event */ + mtspr(SPRN_DBSR, DBSR_BT); + + /* Do the single step trick only when coming from userspace */ + if (user_mode(regs)) { + current->thread.dbcr0 &= ~DBCR0_BT; + current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; + regs->msr |= MSR_DE; + return; + } + + if (notify_die(DIE_SSTEP, "block_step", regs, 5, + 5, SIGTRAP) == NOTIFY_STOP) { + return; + } + if (debugger_sstep(regs)) + return; + } else if (debug_status & DBSR_IC) { /* Instruction complete */ regs->msr &= ~MSR_DE; /* Disable instruction completion */ @@ -1042,9 +1084,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) if (debugger_sstep(regs)) return; - if (user_mode(regs)) { - current->thread.dbcr0 &= ~DBCR0_IC; - } + if (user_mode(regs)) + current->thread.dbcr0 &= ~(DBCR0_IC); _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); } else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { @@ -1088,6 +1129,7 @@ void altivec_assist_exception(struct pt_regs *regs) flush_altivec_to_thread(current); + PPC_WARN_EMULATED(altivec); err = emulate_altivec(regs); if (err == 0) { regs->nip += 4; /* skip emulated instruction */ @@ -1286,3 +1328,79 @@ void kernel_bad_stack(struct pt_regs *regs) void __init trap_init(void) { } + + +#ifdef CONFIG_PPC_EMULATED_STATS + +#define WARN_EMULATED_SETUP(type) .type = { .name = #type } + +struct ppc_emulated ppc_emulated = { +#ifdef CONFIG_ALTIVEC + WARN_EMULATED_SETUP(altivec), +#endif + WARN_EMULATED_SETUP(dcba), + WARN_EMULATED_SETUP(dcbz), + WARN_EMULATED_SETUP(fp_pair), + WARN_EMULATED_SETUP(isel), + WARN_EMULATED_SETUP(mcrxr), + WARN_EMULATED_SETUP(mfpvr), + WARN_EMULATED_SETUP(multiple), + WARN_EMULATED_SETUP(popcntb), + WARN_EMULATED_SETUP(spe), + WARN_EMULATED_SETUP(string), + WARN_EMULATED_SETUP(unaligned), +#ifdef CONFIG_MATH_EMULATION + WARN_EMULATED_SETUP(math), +#elif defined(CONFIG_8XX_MINIMAL_FPEMU) + WARN_EMULATED_SETUP(8xx), +#endif +#ifdef CONFIG_VSX + WARN_EMULATED_SETUP(vsx), +#endif +}; + +u32 ppc_warn_emulated; + +void ppc_warn_emulated_print(const char *type) +{ + if (printk_ratelimit()) + pr_warning("%s used emulated %s instruction\n", current->comm, + type); +} + +static int __init ppc_warn_emulated_init(void) +{ + struct dentry *dir, *d; + unsigned int i; + struct ppc_emulated_entry *entries = (void *)&ppc_emulated; + + if (!powerpc_debugfs_root) + return -ENODEV; + + dir = debugfs_create_dir("emulated_instructions", + powerpc_debugfs_root); + if (!dir) + return -ENOMEM; + + d = debugfs_create_u32("do_warn", S_IRUGO | S_IWUSR, dir, + &ppc_warn_emulated); + if (!d) + goto fail; + + for (i = 0; i < sizeof(ppc_emulated)/sizeof(*entries); i++) { + d = debugfs_create_u32(entries[i].name, S_IRUGO | S_IWUSR, dir, + (u32 *)&entries[i].val.counter); + if (!d) + goto fail; + } + + return 0; + +fail: + debugfs_remove_recursive(dir); + return -ENOMEM; +} + +device_initcall(ppc_warn_emulated_init); + +#endif /* CONFIG_PPC_EMULATED_STATS */ diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 49ac3d6e1399..ef36cbbc5882 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -1,5 +1,215 @@ +#include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/reg.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/thread_info.h> +#include <asm/page.h> + +/* + * load_up_altivec(unused, unused, tsk) + * Disable VMX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + * On SMP we know the VMX is free, since we give it up every + * switch (ie, no lazy save of the vector registers). + */ +_GLOBAL(load_up_altivec) + mfmsr r5 /* grab the current MSR */ + oris r5,r5,MSR_VEC@h + MTMSRD(r5) /* enable use of AltiVec now */ + isync + +/* + * For SMP, we don't do lazy VMX switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_altvec in switch_to. + * VRSAVE isn't dealt with here, that is done in the normal context + * switch code. Note that we could rely on vrsave value to eventually + * avoid saving all of the VREGs here... + */ +#ifndef CONFIG_SMP + LOAD_REG_ADDRBASE(r3, last_task_used_altivec) + toreal(r3) + PPC_LL r4,ADDROFF(last_task_used_altivec)(r3) + PPC_LCMPI 0,r4,0 + beq 1f + + /* Save VMX state to last_task_used_altivec's THREAD struct */ + toreal(r4) + addi r4,r4,THREAD + SAVE_32VRS(0,r5,r4) + mfvscr vr0 + li r10,THREAD_VSCR + stvx vr0,r10,r4 + /* Disable VMX for last_task_used_altivec */ + PPC_LL r5,PT_REGS(r4) + toreal(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r10,MSR_VEC@h + andc r4,r4,r10 + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + + /* Hack: if we get an altivec unavailable trap with VRSAVE + * set to all zeros, we assume this is a broken application + * that fails to set it properly, and thus we switch it to + * all 1's + */ + mfspr r4,SPRN_VRSAVE + cmpdi 0,r4,0 + bne+ 1f + li r4,-1 + mtspr SPRN_VRSAVE,r4 +1: + /* enable use of VMX after return */ +#ifdef CONFIG_PPC32 + mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + oris r9,r9,MSR_VEC@h +#else + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + oris r12,r12,MSR_VEC@h + std r12,_MSR(r1) +#endif + li r4,1 + li r10,THREAD_VSCR + stw r4,THREAD_USED_VR(r5) + lvx vr0,r10,r5 + mtvscr vr0 + REST_32VRS(0,r4,r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + fromreal(r4) + PPC_STL r4,ADDROFF(last_task_used_math)(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + blr + +/* + * giveup_altivec(tsk) + * Disable VMX for the task given as the argument, + * and save the vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + */ +_GLOBAL(giveup_altivec) + mfmsr r5 + oris r5,r5,MSR_VEC@h + SYNC + MTMSRD(r5) /* enable use of VMX now */ + isync + PPC_LCMPI 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + PPC_LL r5,PT_REGS(r3) + PPC_LCMPI 0,r5,0 + SAVE_32VRS(0,r4,r3) + mfvscr vr0 + li r4,THREAD_VSCR + stvx vr0,r4,r3 + beq 1f + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + lis r3,(MSR_VEC|MSR_VSX)@h +FTR_SECTION_ELSE + lis r3,MSR_VEC@h +ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) +#else + lis r3,MSR_VEC@h +#endif + andc r4,r4,r3 /* disable FP for previous task */ + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + LOAD_REG_ADDRBASE(r4,last_task_used_altivec) + PPC_STL r5,ADDROFF(last_task_used_altivec)(r4) +#endif /* CONFIG_SMP */ + blr + +#ifdef CONFIG_VSX + +#ifdef CONFIG_PPC32 +#error This asm code isn't ready for 32-bit kernels +#endif + +/* + * load_up_vsx(unused, unused, tsk) + * Disable VSX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Reuse the fp and vsx saves, but first check to see if they have + * been saved already. + */ +_GLOBAL(load_up_vsx) +/* Load FP and VSX registers if they haven't been done yet */ + andi. r5,r12,MSR_FP + beql+ load_up_fpu /* skip if already loaded */ + andis. r5,r12,MSR_VEC@h + beql+ load_up_altivec /* skip if already loaded */ + +#ifndef CONFIG_SMP + ld r3,last_task_used_vsx@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Disable VSX for last_task_used_vsx */ + addi r4,r4,THREAD + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r6,MSR_VSX@h + andc r6,r4,r6 + std r6,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + ld r4,PACACURRENT(r13) + addi r4,r4,THREAD /* Get THREAD */ + li r6,1 + stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ + /* enable use of VSX after return */ + oris r12,r12,MSR_VSX@h + std r12,_MSR(r1) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + ld r4,PACACURRENT(r13) + std r4,0(r3) +#endif /* CONFIG_SMP */ + b fast_exception_return + +/* + * __giveup_vsx(tsk) + * Disable VSX for the task given as the argument. + * Does NOT save vsx registers. + * Enables the VSX for use in the kernel on return. + */ +_GLOBAL(__giveup_vsx) + mfmsr r5 + oris r5,r5,MSR_VSX@h + mtmsrd r5 /* enable use of VSX now */ + isync + + cmpdi 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + ld r5,PT_REGS(r3) + cmpdi 0,r5,0 + beq 1f + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r3,MSR_VSX@h + andc r4,r4,r3 /* disable VSX for previous task */ + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + ld r4,last_task_used_vsx@got(r2) + std r5,0(r4) +#endif /* CONFIG_SMP */ + blr + +#endif /* CONFIG_VSX */ + /* * The routines below are in assembler so we can closely control the |