1 files changed, 0 insertions, 79 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 3c8658ea13f2..b5fcecb06731 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -610,85 +610,6 @@ int eeh_reset_pe(struct eeh_dev *edev)
 	return -1;
 }
 
-/** Save and restore of PCI BARs
- *
- * Although firmware will set up BARs during boot, it doesn't
- * set up device BAR's after a device reset, although it will,
- * if requested, set up bridge configuration. Thus, we need to
- * configure the PCI devices ourselves.  
- */
-
-/**
- * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
- * @edev: PCI device associated EEH device
- *
- * Loads the PCI configuration space base address registers,
- * the expansion ROM base address, the latency timer, and etc.
- * from the saved values in the device node.
- */
-static inline void eeh_restore_one_device_bars(struct eeh_dev *edev)
-{
-	int i;
-	u32 cmd;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
-
-	if (!edev->phb)
-		return;
-
-	for (i=4; i<10; i++) {
-		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
-	}
-
-	/* 12 == Expansion ROM Address */
-	eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
-
-#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
-#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
-
-	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
-	            SAVED_BYTE(PCI_CACHE_LINE_SIZE));
-
-	eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
-	            SAVED_BYTE(PCI_LATENCY_TIMER));
-
-	/* max latency, min grant, interrupt pin and line */
-	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
-
-	/* Restore PERR & SERR bits, some devices require it,
-	 * don't touch the other command bits
-	 */
-	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
-	if (edev->config_space[1] & PCI_COMMAND_PARITY)
-		cmd |= PCI_COMMAND_PARITY;
-	else
-		cmd &= ~PCI_COMMAND_PARITY;
-	if (edev->config_space[1] & PCI_COMMAND_SERR)
-		cmd |= PCI_COMMAND_SERR;
-	else
-		cmd &= ~PCI_COMMAND_SERR;
-	eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
-}
-
-/**
- * eeh_restore_bars - Restore the PCI config space info
- * @edev: EEH device
- *
- * This routine performs a recursive walk to the children
- * of this device as well.
- */
-void eeh_restore_bars(struct eeh_dev *edev)
-{
-	struct device_node *dn;
-	if (!edev)
-		return;
-	
-	if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code))
-		eeh_restore_one_device_bars(edev);
-
-	for_each_child_of_node(eeh_dev_to_of_node(edev), dn)
-		eeh_restore_bars(of_node_to_eeh_dev(dn));
-}
-
 /**
  * eeh_save_bars - Save device bars
  * @edev: PCI device associated EEH device