diff options
Diffstat (limited to 'arch/powerpc/platforms')
29 files changed, 366 insertions, 135 deletions
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index a9260e21451e..65730275e012 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -14,6 +14,15 @@ # help # This option enables support for the CPCI405 board. +config ACADIA + bool "Acadia" + depends on 40x + default n + select PPC40x_SIMPLE + select 405EZ + help + This option enables support for the AMCC 405EZ Acadia evaluation board. + config EP405 bool "EP405/EP405PC" depends on 40x @@ -23,6 +32,14 @@ config EP405 help This option enables support for the EP405/EP405PC boards. +config HCU4 + bool "Hcu4" + depends on 40x + default y + select 405GPR + help + This option enables support for the Nestal Maschinen HCU4 board. + config KILAUEA bool "Kilauea" depends on 40x @@ -93,6 +110,13 @@ config XILINX_VIRTEX_GENERIC_BOARD Most Virtex designs should use this unless it needs to do some special configuration at board probe time. +config PPC40x_SIMPLE + bool "Simple PowerPC 40x board support" + depends on 40x + default n + help + This option enables the simple PowerPC 40x platform support. + # 40x specific CPU modules, selected based on the board above. config NP405H bool @@ -118,6 +142,12 @@ config 405EX select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII +config 405EZ + bool + select IBM_NEW_EMAC_NO_FLOW_CTRL + select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT + select IBM_NEW_EMAC_MAL_COMMON_ERR + config 405GPR bool @@ -139,6 +169,14 @@ config STB03xxx select IBM405_ERR77 select IBM405_ERR51 +config PPC4xx_GPIO + bool "PPC4xx GPIO support" + depends on 40x + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + help + Enable gpiolib support for ppc40x based boards + # 40x errata/workaround config symbols, selected by the CPU models above # All 405-based cores up until the 405GPR and 405EP have this errata. diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile index 5533a5c8ce4e..9bab76a652a6 100644 --- a/arch/powerpc/platforms/40x/Makefile +++ b/arch/powerpc/platforms/40x/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_KILAUEA) += kilauea.o +obj-$(CONFIG_HCU4) += hcu4.o obj-$(CONFIG_MAKALU) += makalu.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o obj-$(CONFIG_EP405) += ep405.o +obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c new file mode 100644 index 000000000000..60b2afecab75 --- /dev/null +++ b/arch/powerpc/platforms/40x/hcu4.c @@ -0,0 +1,61 @@ +/* + * Architecture- / platform-specific boot-time initialization code for + * IBM PowerPC 4xx based boards. Adapted from original + * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek + * <dan@net4x.com>. + * + * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 IBM Corporation + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> + +static __initdata struct of_device_id hcu4_of_bus[] = { + { .compatible = "ibm,plb3", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init hcu4_device_probe(void) +{ + of_platform_bus_probe(NULL, hcu4_of_bus, NULL); + return 0; +} +machine_device_initcall(hcu4, hcu4_device_probe); + +static int __init hcu4_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "netstal,hcu4")) + return 0; + + return 1; +} + +define_machine(hcu4) { + .name = "HCU4", + .probe = hcu4_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c new file mode 100644 index 000000000000..4498a86b46c3 --- /dev/null +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -0,0 +1,80 @@ +/* + * Generic PowerPC 40x platform support + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + * + * This implements simple platform support for PowerPC 44x chips. This is + * mostly used for eval boards or other simple and "generic" 44x boards. If + * your board has custom functions or hardware, then you will likely want to + * implement your own board.c file to accommodate it. + */ + +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> +#include <asm/uic.h> + +#include <linux/init.h> +#include <linux/of_platform.h> + +static __initdata struct of_device_id ppc40x_of_bus[] = { + { .compatible = "ibm,plb3", }, + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc40x_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc40x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc40x_simple, ppc40x_device_probe); + +/* This is the list of boards that can be supported by this simple + * platform code. This does _not_ mean the boards are compatible, + * as they most certainly are not from a device tree perspective. + * However, their differences are handled by the device tree and the + * drivers and therefore they don't need custom board support files. + * + * Again, if your board needs to do things differently then create a + * board.c file for it rather than adding it to this list. + */ +static char *board[] __initdata = { + "amcc,acadia" +}; + +static int __init ppc40x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + int i = 0; + + for (i = 0; i < ARRAY_SIZE(board); i++) { + if (of_flat_dt_is_compatible(root, board[i])) { + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; + } + } + + return 0; +} + +define_machine(ppc40x_simple) { + .name = "PowerPC 40x Platform", + .probe = ppc40x_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 79c1154f88d4..3496bc05058e 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -167,6 +167,14 @@ config PPC44x_SIMPLE help This option enables the simple PowerPC 44x platform support. +config PPC4xx_GPIO + bool "PPC4xx GPIO support" + depends on 44x + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + help + Enable gpiolib support for ppc440 based boards + # 44x specific CPU modules, selected based on the board above. config 440EP bool diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 044b4e6e8743..ae7c34f37e1c 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -99,11 +99,14 @@ mpc5200_setup_xlb_arbiter(void) out_be32(&xlb->master_pri_enable, 0xff); out_be32(&xlb->master_priority, 0x11111111); - /* Disable XLB pipelining + /* + * Disable XLB pipelining * (cfr errate 292. We could do this only just before ATA PIO * transaction and re-enable it afterwards ...) + * Not needed on MPC5200B. */ - out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); + if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR) + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); iounmap(xlb); } diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 8a3b117b6ce2..81cee7bbf2d2 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -193,7 +193,6 @@ static void __init ksi8560_setup_arch(void) static void ksi8560_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -215,9 +214,6 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 0293e3d3580f..21f009023e26 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -207,7 +207,6 @@ static void __init mpc85xx_ads_setup_arch(void) static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -219,9 +218,6 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 50d7ea8f922b..aeb6a5bc5522 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -307,7 +307,6 @@ static void __init mpc85xx_cds_setup_arch(void) static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -320,9 +319,6 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c index b9246ea0928a..7ec77ce12dad 100644 --- a/arch/powerpc/platforms/85xx/sbc8548.c +++ b/arch/powerpc/platforms/85xx/sbc8548.c @@ -136,7 +136,6 @@ static void __init sbc8548_setup_arch(void) static void sbc8548_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -149,9 +148,6 @@ static void sbc8548_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 0c9a856f66b6..472f254a19d2 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -194,7 +194,6 @@ static void __init sbc8560_setup_arch(void) static void sbc8560_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -206,9 +205,6 @@ static void sbc8560_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c index 18499d7c9d9e..0cca8f5cb272 100644 --- a/arch/powerpc/platforms/85xx/stx_gp3.c +++ b/arch/powerpc/platforms/85xx/stx_gp3.c @@ -130,7 +130,6 @@ static void __init stx_gp3_setup_arch(void) static void stx_gp3_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -142,9 +141,6 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index d850880d6964..2933a8e827d9 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -138,7 +138,6 @@ static void __init tqm85xx_setup_arch(void) static void tqm85xx_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -150,9 +149,6 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 821c45fac18b..fb371f5ce132 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -127,7 +127,6 @@ static unsigned int gef_sbc610_get_fpga_rev(void) static void gef_sbc610_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); @@ -137,7 +136,6 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); seq_printf(m, "SVR\t\t: 0x%x\n", svid); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 2672829a71dc..27e0e682d8e1 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -101,13 +101,11 @@ mpc86xx_hpcn_setup_arch(void) static void mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); seq_printf(m, "SVR\t\t: 0x%x\n", svid); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c index da677a74e2d1..5fd7ed40986f 100644 --- a/arch/powerpc/platforms/86xx/sbc8641d.c +++ b/arch/powerpc/platforms/86xx/sbc8641d.c @@ -63,13 +63,11 @@ sbc8641_setup_arch(void) static void sbc8641_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Wind River Systems\n"); seq_printf(m, "SVR\t\t: 0x%x\n", svid); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 2a14b052abcd..665af1c4195b 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -21,6 +21,7 @@ #include <asm/machdep.h> #include <asm/rtas.h> #include <asm/cell-regs.h> +#include <asm/kdump.h> #include "ras.h" @@ -111,9 +112,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) int ret = -ENOMEM; unsigned long addr; -#ifdef CONFIG_CRASH_DUMP - rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); -#endif + if (__kdump_flag) + rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); area = kmalloc(sizeof(*area), GFP_KERNEL); if (!area) diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index efb3964457b1..c0d86e1f56ea 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -54,8 +54,8 @@ #endif /* - * The primary thread of each non-boot processor is recorded here before - * smp init. + * The Primary thread of each non-boot processor was started from the OF client + * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop. */ static cpumask_t of_spin_map; @@ -208,11 +208,7 @@ void __init smp_init_cell(void) /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { for_each_present_cpu(i) { - if (i % 2 == 0) - /* - * Even-numbered logical cpus correspond to - * primary threads. - */ + if (cpu_thread_in_core(i) == 0) cpu_set(i, of_spin_map); } } else { diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 010a51f59796..b73c369cc6f1 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -548,6 +548,11 @@ spufs_regs_read(struct file *file, char __user *buffer, int ret; struct spu_context *ctx = file->private_data; + /* pre-check for file position: if we'd return EOF, there's no point + * causing a deschedule */ + if (*pos >= sizeof(ctx->csa.lscsa->gprs)) + return 0; + ret = spu_acquire_saved(ctx); if (ret) return ret; @@ -2426,38 +2431,49 @@ static inline int spufs_switch_log_avail(struct spu_context *ctx) static int spufs_switch_log_open(struct inode *inode, struct file *file) { struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + int rc; + + rc = spu_acquire(ctx); + if (rc) + return rc; - /* - * We (ab-)use the mapping_lock here because it serves the similar - * purpose for synchronizing open/close elsewhere. Maybe it should - * be renamed eventually. - */ - mutex_lock(&ctx->mapping_lock); if (ctx->switch_log) { - spin_lock(&ctx->switch_log->lock); - ctx->switch_log->head = 0; - ctx->switch_log->tail = 0; - spin_unlock(&ctx->switch_log->lock); - } else { - /* - * We allocate the switch log data structures on first open. - * They will never be free because we assume a context will - * be traced until it goes away. - */ - ctx->switch_log = kzalloc(sizeof(struct switch_log) + - SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry), - GFP_KERNEL); - if (!ctx->switch_log) - goto out; - spin_lock_init(&ctx->switch_log->lock); - init_waitqueue_head(&ctx->switch_log->wait); + rc = -EBUSY; + goto out; } - mutex_unlock(&ctx->mapping_lock); + + ctx->switch_log = kmalloc(sizeof(struct switch_log) + + SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry), + GFP_KERNEL); + + if (!ctx->switch_log) { + rc = -ENOMEM; + goto out; + } + + ctx->switch_log->head = ctx->switch_log->tail = 0; + init_waitqueue_head(&ctx->switch_log->wait); + rc = 0; + +out: + spu_release(ctx); + return rc; +} + +static int spufs_switch_log_release(struct inode *inode, struct file *file) +{ + struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + int rc; + + rc = spu_acquire(ctx); + if (rc) + return rc; + + kfree(ctx->switch_log); + ctx->switch_log = NULL; + spu_release(ctx); return 0; - out: - mutex_unlock(&ctx->mapping_lock); - return -ENOMEM; } static int switch_log_sprint(struct spu_context *ctx, char *tbuf, int n) @@ -2485,42 +2501,54 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf, if (!buf || len < 0) return -EINVAL; + error = spu_acquire(ctx); + if (error) + return error; + while (cnt < len) { char tbuf[128]; int width; - if (file->f_flags & O_NONBLOCK) { - if (spufs_switch_log_used(ctx) <= 0) - return cnt ? cnt : -EAGAIN; - } else { - /* Wait for data in buffer */ - error = wait_event_interruptible(ctx->switch_log->wait, - spufs_switch_log_used(ctx) > 0); - if (error) + if (spufs_switch_log_used(ctx) == 0) { + if (cnt > 0) { + /* If there's data ready to go, we can + * just return straight away */ + break; + + } else if (file->f_flags & O_NONBLOCK) { + error = -EAGAIN; break; - } - spin_lock(&ctx->switch_log->lock); - if (ctx->switch_log->head == ctx->switch_log->tail) { - /* multiple readers race? */ - spin_unlock(&ctx->switch_log->lock); - continue; + } else { + /* spufs_wait will drop the mutex and + * re-acquire, but since we're in read(), the + * file cannot be _released (and so + * ctx->switch_log is stable). + */ + error = spufs_wait(ctx->switch_log->wait, + spufs_switch_log_used(ctx) > 0); + + /* On error, spufs_wait returns without the + * state mutex held */ + if (error) + return error; + + /* We may have had entries read from underneath + * us while we dropped the mutex in spufs_wait, + * so re-check */ + if (spufs_switch_log_used(ctx) == 0) + continue; + } } width = switch_log_sprint(ctx, tbuf, sizeof(tbuf)); - if (width < len) { + if (width < len) ctx->switch_log->tail = (ctx->switch_log->tail + 1) % SWITCH_LOG_BUFSIZE; - } - - spin_unlock(&ctx->switch_log->lock); - - /* - * If the record is greater than space available return - * partial buffer (so far) - */ - if (width >= len) + else + /* If the record is greater than space available return + * partial buffer (so far) */ break; error = copy_to_user(buf + cnt, tbuf, width); @@ -2529,6 +2557,8 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf, cnt += width; } + spu_release(ctx); + return cnt == 0 ? error : cnt; } @@ -2537,29 +2567,41 @@ static unsigned int spufs_switch_log_poll(struct file *file, poll_table *wait) struct inode *inode = file->f_path.dentry->d_inode; struct spu_context *ctx = SPUFS_I(inode)->i_ctx; unsigned int mask = 0; + int rc; poll_wait(file, &ctx->switch_log->wait, wait); + rc = spu_acquire(ctx); + if (rc) + return rc; + if (spufs_switch_log_used(ctx) > 0) mask |= POLLIN; + spu_release(ctx); + return mask; } static const struct file_operations spufs_switch_log_fops = { - .owner = THIS_MODULE, - .open = spufs_switch_log_open, - .read = spufs_switch_log_read, - .poll = spufs_switch_log_poll, + .owner = THIS_MODULE, + .open = spufs_switch_log_open, + .read = spufs_switch_log_read, + .poll = spufs_switch_log_poll, + .release = spufs_switch_log_release, }; +/** + * Log a context switch event to a switch log reader. + * + * Must be called with ctx->state_mutex held. + */ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx, u32 type, u32 val) { if (!ctx->switch_log) return; - spin_lock(&ctx->switch_log->lock); if (spufs_switch_log_avail(ctx) > 1) { struct switch_log_entry *p; @@ -2573,7 +2615,6 @@ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx, ctx->switch_log->head = (ctx->switch_log->head + 1) % SWITCH_LOG_BUFSIZE; } - spin_unlock(&ctx->switch_log->lock); wake_up(&ctx->switch_log->wait); } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index c9bb7cfd3dca..c58bd36b0c5b 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -249,6 +249,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc, spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); + spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, *status); spu_release(ctx); if (signal_pending(current)) @@ -417,8 +418,6 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event) ret = spu_run_fini(ctx, npc, &status); spu_yield(ctx); - spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, status); - if ((status & SPU_STATUS_STOPPED_BY_STOP) && (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100)) ctx->stats.libassist++; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 67595bc380dc..2ad914c47493 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -312,6 +312,15 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff, */ node = cpu_to_node(raw_smp_processor_id()); for (n = 0; n < MAX_NUMNODES; n++, node++) { + /* + * "available_spus" counts how many spus are not potentially + * going to be used by other affinity gangs whose reference + * context is already in place. Although this code seeks to + * avoid having affinity gangs with a summed amount of + * contexts bigger than the amount of spus in the node, + * this may happen sporadically. In this case, available_spus + * becomes negative, which is harmless. + */ int available_spus; node = (node < MAX_NUMNODES) ? node : 0; @@ -321,12 +330,10 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff, available_spus = 0; mutex_lock(&cbe_spu_info[node].list_mutex); list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { - if (spu->ctx && spu->ctx->gang - && spu->ctx->aff_offset == 0) - available_spus -= - (spu->ctx->gang->contexts - 1); - else - available_spus++; + if (spu->ctx && spu->ctx->gang && !spu->ctx->aff_offset + && spu->ctx->gang->aff_ref_spu) + available_spus -= spu->ctx->gang->contexts; + available_spus++; } if (available_spus < ctx->gang->contexts) { mutex_unlock(&cbe_spu_info[node].list_mutex); @@ -437,6 +444,11 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) atomic_dec(&cbe_spu_info[spu->node].reserved_spus); if (ctx->gang) + /* + * If ctx->gang->aff_sched_count is positive, SPU affinity is + * being considered in this gang. Using atomic_dec_if_positive + * allow us to skip an explicit check for affinity in this gang + */ atomic_dec_if_positive(&ctx->gang->aff_sched_count); spu_switch_notify(spu, NULL); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 8ae8ef9dfc22..15c62d3ca129 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -65,7 +65,6 @@ enum { }; struct switch_log { - spinlock_t lock; wait_queue_head_t wait; unsigned long head; unsigned long tail; diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 2ece399f2862..d0b1f3f4d9c8 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -40,6 +40,7 @@ static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait); static ktime_t sputrace_start; static unsigned long sputrace_head, sputrace_tail; static struct sputrace *sputrace_log; +static int sputrace_logging; static int sputrace_used(void) { @@ -79,6 +80,11 @@ static ssize_t sputrace_read(struct file *file, char __user *buf, char tbuf[128]; int width; + /* If we have data ready to return, don't block waiting + * for more */ + if (cnt > 0 && sputrace_used() == 0) + break; + error = wait_event_interruptible(sputrace_wait, sputrace_used() > 0); if (error) @@ -109,24 +115,49 @@ static ssize_t sputrace_read(struct file *file, char __user *buf, static int sputrace_open(struct inode *inode, struct file *file) { + int rc; + spin_lock(&sputrace_lock); + if (sputrace_logging) { + rc = -EBUSY; + goto out; + } + + sputrace_logging = 1; sputrace_head = sputrace_tail = 0; sputrace_start = ktime_get(); + rc = 0; + +out: spin_unlock(&sputrace_lock); + return rc; +} +static int sputrace_release(struct inode *inode, struct file *file) +{ + spin_lock(&sputrace_lock); + sputrace_logging = 0; + spin_unlock(&sputrace_lock); return 0; } static const struct file_operations sputrace_fops = { - .owner = THIS_MODULE, - .open = sputrace_open, - .read = sputrace_read, + .owner = THIS_MODULE, + .open = sputrace_open, + .read = sputrace_read, + .release = sputrace_release, }; static void sputrace_log_item(const char *name, struct spu_context *ctx, struct spu *spu) { spin_lock(&sputrace_lock); + + if (!sputrace_logging) { + spin_unlock(&sputrace_lock); + return; + } + if (sputrace_avail() > 1) { struct sputrace *t = sputrace_log + sputrace_head; diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c index 49c87769b1f8..c23617c6baf3 100644 --- a/arch/powerpc/platforms/cell/spufs/syscalls.c +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -69,9 +69,9 @@ static long do_spu_create(const char __user *pathname, unsigned int flags, if (!IS_ERR(tmp)) { struct nameidata nd; - ret = path_lookup(tmp, LOOKUP_PARENT| - LOOKUP_OPEN|LOOKUP_CREATE, &nd); + ret = path_lookup(tmp, LOOKUP_PARENT, &nd); if (!ret) { + nd.flags |= LOOKUP_OPEN | LOOKUP_CREATE; ret = spufs_create(&nd, flags, mode, neighbor); path_put(&nd.path); } diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c index d0b25b8c39d1..32ba0fa0ad03 100644 --- a/arch/powerpc/platforms/embedded6xx/c2k.c +++ b/arch/powerpc/platforms/embedded6xx/c2k.c @@ -116,10 +116,7 @@ static void c2k_restart(char *cmd) void c2k_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; - seq_printf(m, "Vendor\t\t: GEFanuc\n"); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING); } diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c index 5a19b9a1457c..4c485e984236 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -119,10 +119,7 @@ static void prpmc2800_restart(char *cmd) void prpmc2800_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; - seq_printf(m, "Vendor\t\t: Motorola\n"); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING); } diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 140d02a5232a..a623ad256e9e 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -22,6 +22,12 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) int ret; start_pfn = base >> PAGE_SHIFT; + + if (!pfn_valid(start_pfn)) { + lmb_remove(base, lmb_size); + return 0; + } + zone = page_zone(pfn_to_page(start_pfn)); /* diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index a8c446697f9e..d56491d182d3 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -44,6 +44,7 @@ #include <asm/tce.h> #include <asm/ppc-pci.h> #include <asm/udbg.h> +#include <asm/kdump.h> #include "plpar_wrappers.h" @@ -291,9 +292,8 @@ static void iommu_table_setparms(struct pci_controller *phb, tbl->it_base = (unsigned long)__va(*basep); -#ifndef CONFIG_CRASH_DUMP - memset((void *)tbl->it_base, 0, *sizep); -#endif + if (!__kdump_flag) + memset((void *)tbl->it_base, 0, *sizep); tbl->it_busno = phb->bus->number; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index e00f96baa381..1a231c389ba0 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -52,8 +52,8 @@ /* - * The primary thread of each non-boot processor is recorded here before - * smp init. + * The Primary thread of each non-boot processor was started from the OF client + * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop. */ static cpumask_t of_spin_map; @@ -161,8 +161,7 @@ static void __devinit smp_pSeries_kick_cpu(int nr) static int smp_pSeries_cpu_bootable(unsigned int nr) { /* Special case - we inhibit secondary thread startup - * during boot if the user requests it. Odd-numbered - * cpus are assumed to be secondary threads. + * during boot if the user requests it. */ if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT) && @@ -199,11 +198,7 @@ static void __init smp_init_pseries(void) /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { for_each_present_cpu(i) { - if (i % 2 == 0) - /* - * Even-numbered logical cpus correspond to - * primary threads. - */ + if (cpu_thread_in_core(i) == 0) cpu_set(i, of_spin_map); } } else { |