summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/boot/dts/bamboo.dts142
-rw-r--r--arch/powerpc/boot/dts/canyonlands.dts222
-rw-r--r--arch/powerpc/boot/dts/ebony.dts164
-rw-r--r--arch/powerpc/boot/dts/ep405.dts100
-rw-r--r--arch/powerpc/boot/dts/glacier.dts262
-rw-r--r--arch/powerpc/boot/dts/haleakala.dts136
-rw-r--r--arch/powerpc/boot/dts/holly.dts122
-rw-r--r--arch/powerpc/boot/dts/katmai.dts210
-rw-r--r--arch/powerpc/boot/dts/kilauea.dts182
-rw-r--r--arch/powerpc/boot/dts/makalu.dts182
-rw-r--r--arch/powerpc/boot/dts/ps3.dts16
-rw-r--r--arch/powerpc/boot/dts/rainier.dts162
-rw-r--r--arch/powerpc/boot/dts/sequoia.dts172
-rw-r--r--arch/powerpc/boot/dts/taishan.dts212
-rw-r--r--arch/powerpc/boot/dts/walnut.dts118
-rw-r--r--arch/powerpc/boot/dts/warp.dts106
-rw-r--r--arch/powerpc/boot/dts/yosemite.dts146
17 files changed, 1344 insertions, 1310 deletions
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index ba2521bdaab1..6ce0cc2c0208 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -11,12 +11,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,bamboo";
compatible = "amcc,bamboo";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -34,13 +36,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -48,14 +50,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -65,22 +67,22 @@
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -92,29 +94,29 @@
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
};
POB0: opb {
@@ -124,101 +126,101 @@
/* Bamboo is oddball in the 44x world and doesn't use the ERPN
* bits.
*/
- ranges = <00000000 0 00000000 80000000
- 80000000 0 80000000 80000000>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+ 0x80000000 0x00000000 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <ef600e00 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
@@ -227,26 +229,26 @@
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <ef600f00 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
usb@ef601000 {
compatible = "ohci-be";
- reg = <ef601000 80>;
- interrupts = <8 1 9 1>;
+ reg = <0xef601000 0x00000080>;
+ interrupts = <0x8 0x1 0x9 0x1>;
interrupt-parent = < &UIC1 >;
};
};
@@ -258,35 +260,35 @@
#address-cells = <3>;
compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
primary;
- reg = <0 eec00000 8 /* Config space access */
- 0 eed00000 4 /* IACK */
- 0 eed00000 4 /* Special cycle */
- 0 ef400000 40>; /* Internal registers */
+ reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */
+ 0x00000000 0xeed00000 0x00000004 /* IACK */
+ 0x00000000 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000000 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 a0000000 0 a0000000 0 20000000
- 01000000 0 00000000 0 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* Bamboo has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 1c 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 1b 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 1a 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 19 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
>;
};
};
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 39634124929b..f9fe03252150 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -8,12 +8,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,canyonlands";
compatible = "amcc,canyonlands";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,460EX";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -43,14 +45,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -72,11 +74,11 @@
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <a 4 b 4>; /* cascade */
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -84,22 +86,22 @@
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <0f0 009>;
+ dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <10 4 11 4>; /* cascade */
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-460ex";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-460ex";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -111,74 +113,74 @@
SDRAM0: sdram {
compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
- num-rx-chans = <10>;
+ num-rx-chans = <16>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-parent = <&UIC2>;
- interrupts = < /*TXEOB*/ 6 4
- /*RXEOB*/ 7 4
- /*SERR*/ 3 4
- /*TXDE*/ 4 4
- /*RXDE*/ 5 4>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
};
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <b0000000 4 b0000000 50000000>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-460ex", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <6 4>;
+ interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 1e0000>;
+ reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
- reg = <1e0000 20000>;
+ reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "ramdisk";
- reg = <200000 1400000>;
+ reg = <0x00200000 0x01400000>;
};
partition@1600000 {
label = "jffs2";
- reg = <1600000 400000>;
+ reg = <0x01600000 0x00400000>;
};
partition@1a00000 {
label = "user";
- reg = <1a00000 2560000>;
+ reg = <0x01a00000 0x02560000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
@@ -186,103 +188,103 @@
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1d 4>;
+ interrupts = <0x1d 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1e 4>;
+ interrupts = <0x1e 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-460ex", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-460ex", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-460ex", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601500 {
compatible = "ibm,rgmii-460ex", "ibm,rgmii";
- reg = <ef601500 8>;
+ reg = <0xef601500 0x00000008>;
has-mdio;
};
TAH0: emac-tah@ef601350 {
compatible = "ibm,tah-460ex", "ibm,tah";
- reg = <ef601350 30>;
+ reg = <0xef601350 0x00000030>;
};
TAH1: emac-tah@ef601450 {
compatible = "ibm,tah-460ex", "ibm,tah";
- reg = <ef601450 30>;
+ reg = <0xef601450 0x00000030>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-460ex", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 10 4
- /*Wake*/ 1 &UIC2 14 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
tah-device = <&TAH0>;
@@ -295,23 +297,23 @@
device_type = "network";
compatible = "ibm,emac-460ex", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 11 4
- /*Wake*/ 1 &UIC2 15 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <8>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
tah-device = <&TAH1>;
@@ -331,27 +333,27 @@
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <c 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- c 0ed00000 4 /* Special cycles */
- c 0ec80000 100 /* Internal registers */
- c 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
- 01000000 0 00000000 0000000c 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0x3f */
- bus-range = <0 3f>;
+ bus-range = <0x0 0x3f>;
/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
};
PCIE0: pciex@d00000000 {
@@ -361,23 +363,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <d 00000000 20000000 /* Config space access */
- c 08010000 00001000>; /* Registers */
- dcr-reg = <100 020>;
- sdr-base = <300>;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
- 01000000 0 00000000 0000000f 80000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -387,12 +389,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
@@ -402,23 +404,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <d 20000000 20000000 /* Config space access */
- c 08011000 00001000>; /* Registers */
- dcr-reg = <120 020>;
- sdr-base = <340>;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
- 01000000 0 00000000 0000000f 80010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 80 to 0xbf */
- bus-range = <80 bf>;
+ bus-range = <0x80 0xbf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -428,12 +430,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
};
};
};
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 5079dc890e0e..ec2d142291b4 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -11,12 +11,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "ibm,ebony";
compatible = "ibm,ebony";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440GP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; // Filled in by zImage
timebase-frequency = <0>; // Filled in by zImage
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>; /* 32 kB */
- d-cache-size = <8000>; /* 32 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>; /* 32 kB */
+ d-cache-size = <32768>; /* 32 kB */
dcr-controller;
dcr-access-method = "native";
};
@@ -46,14 +48,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; // Filled in by zImage
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -64,17 +66,17 @@
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
CPC0: cpc {
compatible = "ibm,cpc-440gp";
- dcr-reg = <0b0 003 0e0 010>;
+ dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
// FIXME: anything else?
};
@@ -87,37 +89,37 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-440gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
// FIXME: anything else?
};
SRAM0: sram {
compatible = "ibm,sram-440gp";
- dcr-reg = <020 8 00a 1>;
+ dcr-reg = <0x020 0x008 0x00a 0x001>;
};
DMA0: dma {
// FIXME: ???
compatible = "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <4>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
@@ -126,34 +128,34 @@
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
- dcr-reg = <090 00b>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ dcr-reg = <0x090 0x00b>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; // Filled in by zImage
EBC0: ebc {
compatible = "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; // Filled in by zImage
// ranges property is supplied by zImage
// based on firmware's configuration of the
// EBC bridge
- interrupts = <5 4>;
+ interrupts = <0x5 0x4>;
interrupt-parent = <&UIC1>;
small-flash@0,80000 {
compatible = "jedec-flash";
bank-width = <1>;
- reg = <0 80000 80000>;
+ reg = <0x00000000 0x00080000 0x00080000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "OpenBIOS";
- reg = <0 80000>;
+ reg = <0x00000000 0x00080000>;
read-only;
};
};
@@ -161,101 +163,101 @@
nvram@1,0 {
/* NVRAM & RTC */
compatible = "ds1743-nvram";
- #bytes = <2000>;
- reg = <1 0 2000>;
+ #bytes = <0x2000>;
+ reg = <0x00000001 0x00000000 0x00002000>;
};
large-flash@2,0 {
compatible = "jedec-flash";
bank-width = <1>;
- reg = <2 0 400000>;
+ reg = <0x00000002 0x00000000 0x00400000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fs";
- reg = <0 380000>;
+ reg = <0x00000000 0x00380000>;
};
partition@380000 {
label = "firmware";
- reg = <380000 80000>;
+ reg = <0x00380000 0x00080000>;
};
};
ir@3,0 {
- reg = <3 0 10>;
+ reg = <0x00000003 0x00000000 0x00000010>;
};
fpga@7,0 {
compatible = "Ebony-FPGA";
- reg = <7 0 10>;
- virtual-reg = <e8300000>;
+ reg = <0x00000007 0x00000000 0x00000010>;
+ virtual-reg = <0xe8300000>;
};
};
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000200 8>;
- virtual-reg = <e0000200>;
- clock-frequency = <A8C000>;
- current-speed = <2580>;
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@40000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000300 8>;
- virtual-reg = <e0000300>;
- clock-frequency = <A8C000>;
- current-speed = <2580>;
+ reg = <0x40000300 0x00000008>;
+ virtual-reg = <0xe0000300>;
+ clock-frequency = <11059200>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@40000400 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000400 14>;
+ reg = <0x40000400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@40000500 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000500 14>;
+ reg = <0x40000500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
GPIO0: gpio@40000700 {
/* FIXME */
compatible = "ibm,gpio-440gp";
- reg = <40000700 20>;
+ reg = <0x40000700 0x00000020>;
};
ZMII0: emac-zmii@40000780 {
compatible = "ibm,zmii-440gp", "ibm,zmii";
- reg = <40000780 c>;
+ reg = <0x40000780 0x0000000c>;
};
EMAC0: ethernet@40000800 {
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0x40000800 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
@@ -263,18 +265,18 @@
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <40000900 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0x40000900 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
@@ -282,9 +284,9 @@
GPT0: gpt@40000a00 {
/* FIXME */
- reg = <40000a00 d4>;
+ reg = <0x40000a00 0x000000d4>;
interrupt-parent = <&UIC0>;
- interrupts = <12 4 13 4 14 4 15 4 16 4>;
+ interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
};
};
@@ -296,35 +298,35 @@
#address-cells = <3>;
compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
primary;
- reg = <2 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- 2 0ed00000 4 /* Special cycles */
- 2 0ec80000 f0 /* Internal registers */
- 2 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x00000002 0x0ed00000 0x00000004 /* Special cycles */
+ 0x00000002 0x0ec80000 0x000000f0 /* Internal registers */
+ 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 00000003 80000000 0 80000000
- 01000000 0 00000000 00000002 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* Ebony has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 17 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 18 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 19 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 1a 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
>;
};
};
diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts
index 92938557ac8a..53ef06cc2134 100644
--- a/arch/powerpc/boot/dts/ep405.dts
+++ b/arch/powerpc/boot/dts/ep405.dts
@@ -9,12 +9,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "ep405";
compatible = "ep405";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,405GP";
- reg = <0>;
- clock-frequency = <bebc200>; /* Filled in by zImage */
+ reg = <0x00000000>;
+ clock-frequency = <200000000>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
dcr-controller;
dcr-access-method = "native";
};
@@ -43,14 +45,14 @@
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 9>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -65,91 +67,91 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL: mcmal {
compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <1>;
num-rx-chans = <1>;
interrupt-parent = <&UIC0>;
interrupts = <
- b 4 /* TXEOB */
- c 4 /* RXEOB */
- a 4 /* SERR */
- d 4 /* TXDE */
- e 4 /* RXDE */>;
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
};
POB0: opb {
compatible = "ibm,opb-405gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <ef600000 ef600000 a00000>;
- dcr-reg = <0a0 5>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by zImage */
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC: i2c@ef600500 {
compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <ef600500 11>;
+ reg = <0xef600500 0x00000011>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
GPIO: gpio@ef600700 {
compatible = "ibm,gpio-405gp";
- reg = <ef600700 20>;
+ reg = <0xef600700 0x00000020>;
};
EMAC: ethernet@ef600800 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
interrupts = <
- f 4 /* Ethernet */
- 9 4 /* Ethernet Wake Up */>;
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
- reg = <ef600800 70>;
+ reg = <0xef600800 0x00000070>;
mal-device = <&MAL>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
};
};
EBC0: ebc {
compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
@@ -163,13 +165,13 @@
/* NVRAM and RTC */
nvrtc@4,200000 {
compatible = "ds1742";
- reg = <4 200000 0>; /* size fixed up by zImage */
+ reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
};
/* "BCSR" CPLD contains a PCI irq controller */
bcsr@4,0 {
compatible = "ep405-bcsr";
- reg = <4 0 10>;
+ reg = <0x00000004 0x00000000 0x00000010>;
interrupt-controller;
/* Routing table */
irq-routing = [ 00 /* SYSERR */
@@ -198,26 +200,26 @@
#address-cells = <3>;
compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
primary;
- reg = <eec00000 8 /* Config space access */
- eed80000 4 /* IACK */
- eed80000 4 /* Special cycle */
- ef480000 40>; /* Internal registers */
+ reg = <0xeec00000 0x00000008 /* Config space access */
+ 0xeed80000 0x00000004 /* IACK */
+ 0xeed80000 0x00000004 /* Special cycle */
+ 0xef480000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* That's all I know about IRQs on that thing ... */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* USB */
- 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+ 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
>;
};
};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 0f2fc077d8db..463650c5f61d 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -8,12 +8,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,glacier";
compatible = "amcc,glacier", "amcc,canyonlands";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -31,13 +33,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,460GT";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -45,14 +47,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -62,11 +64,11 @@
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -74,11 +76,11 @@
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <a 4 b 4>; /* cascade */
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -86,22 +88,22 @@
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <0f0 009>;
+ dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <10 4 11 4>; /* cascade */
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-460gt";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-460gt";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -113,75 +115,75 @@
SDRAM0: sdram {
compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
- num-rx-chans = <20>;
+ num-rx-chans = <32>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-parent = <&UIC2>;
- interrupts = < /*TXEOB*/ 6 4
- /*RXEOB*/ 7 4
- /*SERR*/ 3 4
- /*TXDE*/ 4 4
- /*RXDE*/ 5 4>;
- desc-base-addr-high = <8>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
};
POB0: opb {
compatible = "ibm,opb-460gt", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <b0000000 4 b0000000 50000000>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-460gt", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <6 4>;
+ interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 1e0000>;
+ reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
- reg = <1e0000 20000>;
+ reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "ramdisk";
- reg = <200000 1400000>;
+ reg = <0x00200000 0x01400000>;
};
partition@1600000 {
label = "jffs2";
- reg = <1600000 400000>;
+ reg = <0x01600000 0x00400000>;
};
partition@1a00000 {
label = "user";
- reg = <1a00000 2560000>;
+ reg = <0x01a00000 0x02560000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
@@ -189,109 +191,109 @@
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1d 4>;
+ interrupts = <0x1d 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1e 4>;
+ interrupts = <0x1e 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-460gt", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-460gt", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-460gt", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601500 {
compatible = "ibm,rgmii-460gt", "ibm,rgmii";
- reg = <ef601500 8>;
+ reg = <0xef601500 0x00000008>;
has-mdio;
};
RGMII1: emac-rgmii@ef601600 {
compatible = "ibm,rgmii-460gt", "ibm,rgmii";
- reg = <ef601600 8>;
+ reg = <0xef601600 0x00000008>;
has-mdio;
};
TAH0: emac-tah@ef601350 {
compatible = "ibm,tah-460gt", "ibm,tah";
- reg = <ef601350 30>;
+ reg = <0xef601350 0x00000030>;
};
TAH1: emac-tah@ef601450 {
compatible = "ibm,tah-460gt", "ibm,tah";
- reg = <ef601450 30>;
+ reg = <0xef601450 0x00000030>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 10 4
- /*Wake*/ 1 &UIC2 14 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
tah-device = <&TAH0>;
@@ -304,23 +306,23 @@
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 11 4
- /*Wake*/ 1 &UIC2 15 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <8>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
tah-device = <&TAH1>;
@@ -334,23 +336,23 @@
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC2>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 12 4
- /*Wake*/ 1 &UIC2 16 4>;
- reg = <ef601100 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <2>;
- mal-rx-channel = <10>;
+ mal-rx-channel = <16>;
cell-index = <2>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
@@ -362,23 +364,23 @@
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC3>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 13 4
- /*Wake*/ 1 &UIC2 17 4>;
- reg = <ef601200 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x17 0x4>;
+ reg = <0xef601200 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <3>;
- mal-rx-channel = <18>;
+ mal-rx-channel = <24>;
cell-index = <3>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
@@ -396,27 +398,27 @@
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <c 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- c 0ed00000 4 /* Special cycles */
- c 0ec80000 100 /* Internal registers */
- c 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
- 01000000 0 00000000 0000000c 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0x3f */
- bus-range = <0 3f>;
+ bus-range = <0x0 0x3f>;
/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
};
PCIE0: pciex@d00000000 {
@@ -426,23 +428,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <d 00000000 20000000 /* Config space access */
- c 08010000 00001000>; /* Registers */
- dcr-reg = <100 020>;
- sdr-base = <300>;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
- 01000000 0 00000000 0000000f 80000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -452,12 +454,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
@@ -467,23 +469,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <d 20000000 20000000 /* Config space access */
- c 08011000 00001000>; /* Registers */
- dcr-reg = <120 020>;
- sdr-base = <340>;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
- 01000000 0 00000000 0000000f 80010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 80 to 0xbf */
- bus-range = <80 bf>;
+ bus-range = <0x80 0xbf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -493,12 +495,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
};
};
};
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index b5d95ac24dbf..2c2fceaabbcd 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -8,12 +8,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,haleakala";
compatible = "amcc,haleakala", "amcc,kilauea";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EXr";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>; /* 16 kB */
- d-cache-size = <4000>; /* 16 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
@@ -42,14 +44,14 @@
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405exr", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -59,11 +61,11 @@
compatible = "ibm,uic-405exr","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -71,11 +73,11 @@
compatible = "ibm,uic-405exr","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -88,72 +90,72 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-405exr";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405exr", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <80000000 80000000 10000000
- ef600000 ef600000 a00000
- f0000000 f0000000 10000000>;
- dcr-reg = <0a0 5>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405exr", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 200000>;
+ reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
- reg = <200000 200000>;
+ reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
- reg = <400000 3b60000>;
+ reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
@@ -161,68 +163,68 @@
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600200 8>;
- virtual-reg = <ef600200>;
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
+ interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405exr", "ibm,iic";
- reg = <ef600400 14>;
+ reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405exr", "ibm,iic";
- reg = <ef600500 14>;
+ reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405exr", "ibm,rgmii";
- reg = <ef600b00 104>;
+ reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405exr", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600900 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
@@ -237,23 +239,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <a0000000 20000000 /* Config space access */
- ef000000 00001000>; /* Registers */
- dcr-reg = <040 020>;
- sdr-base = <400>;
+ port = <0x0>; /* port number */
+ reg = <0xa0000000 0x20000000 /* Config space access */
+ 0xef000000 0x00001000>; /* Registers */
+ dcr-reg = <0x040 0x020>;
+ sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 90000000 0 08000000
- 01000000 0 00000000 e0000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
- bus-range = <00 3f>;
+ bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -263,12 +265,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
};
};
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index b5d87895fe06..f87fe7b9ced9 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -10,6 +10,8 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
model = "41K7339";
compatible = "ibm,holly";
@@ -21,22 +23,22 @@
#size-cells =<0>;
PowerPC,750CL@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>;
- i-cache-line-size = <20>;
- d-cache-size = <8000>;
- i-cache-size = <8000>;
- d-cache-sets = <80>;
- i-cache-sets = <80>;
- timebase-frequency = <2faf080>;
- clock-frequency = <23c34600>;
- bus-frequency = <bebc200>;
+ reg = <0x00000000>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ d-cache-sets = <128>;
+ i-cache-sets = <128>;
+ timebase-frequency = <50000000>;
+ clock-frequency = <600000000>;
+ bus-frequency = <200000000>;
};
};
memory@0 {
device_type = "memory";
- reg = <00000000 20000000>;
+ reg = <0x00000000 0x20000000>;
};
tsi109@c0000000 {
@@ -44,33 +46,33 @@
compatible = "tsi109-bridge", "tsi108-bridge";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 c0000000 00010000>;
- reg = <c0000000 00010000>;
+ ranges = <0x00000000 0xc0000000 0x00010000>;
+ reg = <0xc0000000 0x00010000>;
i2c@7000 {
device_type = "i2c";
compatible = "tsi109-i2c", "tsi108-i2c";
interrupt-parent = <&MPIC>;
- interrupts = <e 2>;
- reg = <7000 400>;
+ interrupts = <0xe 0x2>;
+ reg = <0x00007000 0x00000400>;
};
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi109-mdio", "tsi108-mdio";
- reg = <6000 50>;
+ reg = <0x00006000 0x00000050>;
#address-cells = <1>;
#size-cells = <0>;
PHY1: ethernet-phy@1 {
compatible = "bcm5461a";
- reg = <1>;
+ reg = <0x00000001>;
txc-rxc-delay-disable;
};
PHY2: ethernet-phy@2 {
compatible = "bcm5461a";
- reg = <2>;
+ reg = <0x00000002>;
txc-rxc-delay-disable;
};
};
@@ -80,10 +82,10 @@
compatible = "tsi109-ethernet", "tsi108-ethernet";
#address-cells = <1>;
#size-cells = <0>;
- reg = <6000 200>;
+ reg = <0x00006000 0x00000200>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&MPIC>;
- interrupts = <10 2>;
+ interrupts = <0x10 0x2>;
mdio-handle = <&MDIO>;
phy-handle = <&PHY1>;
};
@@ -93,10 +95,10 @@
compatible = "tsi109-ethernet", "tsi108-ethernet";
#address-cells = <1>;
#size-cells = <0>;
- reg = <6400 200>;
+ reg = <0x00006400 0x00000200>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&MPIC>;
- interrupts = <11 2>;
+ interrupts = <0x11 0x2>;
mdio-handle = <&MDIO>;
phy-handle = <&PHY2>;
};
@@ -104,23 +106,23 @@
serial@7808 {
device_type = "serial";
compatible = "ns16550";
- reg = <7808 200>;
- virtual-reg = <c0007808>;
- clock-frequency = <3F9C6000>;
- current-speed = <1c200>;
+ reg = <0x00007808 0x00000200>;
+ virtual-reg = <0xc0007808>;
+ clock-frequency = <1067212800>;
+ current-speed = <115200>;
interrupt-parent = <&MPIC>;
- interrupts = <c 2>;
+ interrupts = <0xc 0x2>;
};
serial@7c08 {
device_type = "serial";
compatible = "ns16550";
- reg = <7c08 200>;
- virtual-reg = <c0007c08>;
- clock-frequency = <3F9C6000>;
- current-speed = <1c200>;
+ reg = <0x00007c08 0x00000200>;
+ virtual-reg = <0xc0007c08>;
+ clock-frequency = <1067212800>;
+ current-speed = <115200>;
interrupt-parent = <&MPIC>;
- interrupts = <d 2>;
+ interrupts = <0xd 0x2>;
};
MPIC: pic@7400 {
@@ -128,7 +130,7 @@
compatible = "chrp,open-pic";
interrupt-controller;
#interrupt-cells = <2>;
- reg = <7400 400>;
+ reg = <0x00007400 0x00000400>;
big-endian;
};
@@ -138,42 +140,42 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <1000 1000>;
- bus-range = <0 0>;
+ reg = <0x00001000 0x00001000>;
+ bus-range = <0x0 0x0>;
/*----------------------------------------------------+
| PCI memory range.
| 01 denotes I/O space
| 02 denotes 32-bit memory space
+----------------------------------------------------*/
- ranges = <02000000 0 40000000 40000000 0 10000000
- 01000000 0 00000000 7e000000 0 00010000>;
- clock-frequency = <7f28154>;
+ ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+ 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+ clock-frequency = <133333332>;
interrupt-parent = <&MPIC>;
- interrupts = <17 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <0x17 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
/*----------------------------------------------------+
| The INTA, INTB, INTC, INTD are shared.
+----------------------------------------------------*/
interrupt-map = <
- 0800 0 0 1 &RT0 24 0
- 0800 0 0 2 &RT0 25 0
- 0800 0 0 3 &RT0 26 0
- 0800 0 0 4 &RT0 27 0
-
- 1000 0 0 1 &RT0 25 0
- 1000 0 0 2 &RT0 26 0
- 1000 0 0 3 &RT0 27 0
- 1000 0 0 4 &RT0 24 0
-
- 1800 0 0 1 &RT0 26 0
- 1800 0 0 2 &RT0 27 0
- 1800 0 0 3 &RT0 24 0
- 1800 0 0 4 &RT0 25 0
-
- 2000 0 0 1 &RT0 27 0
- 2000 0 0 2 &RT0 24 0
- 2000 0 0 3 &RT0 25 0
- 2000 0 0 4 &RT0 26 0
+ 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+ 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+ 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+ 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+ 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+ 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+ 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+ 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+ 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+ 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+ 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+ 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+ 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+ 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+ 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+ 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
@@ -183,7 +185,7 @@
clock-frequency = <0>;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <17 2>;
+ interrupts = <0x17 0x2>;
interrupt-parent = <&MPIC>;
};
};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index cc2873a531d2..b94bf61b9bcc 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -12,12 +12,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,katmai";
compatible = "amcc,katmai";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -33,13 +35,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440SPe";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -47,14 +49,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -76,11 +78,11 @@
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <a 4 b 4>; /* cascade */
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -88,22 +90,22 @@
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <0f0 009>;
+ dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <10 4 11 4>; /* cascade */
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440spe";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440spe";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -115,108 +117,108 @@
SDRAM0: sdram {
compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <1>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
- /*RXEOB*/ 1 &UIC1 7 4
- /*SERR*/ 2 &UIC1 1 4
- /*TXDE*/ 3 &UIC1 2 4
- /*RXDE*/ 4 &UIC1 3 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+ /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+ /*SERR*/ 0x2 &UIC1 0x1 0x4
+ /*TXDE*/ 0x3 &UIC1 0x2 0x4
+ /*RXDE*/ 0x4 &UIC1 0x3 0x4>;
};
POB0: opb {
compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 4 e0000000 20000000>;
+ ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@10000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <10000200 8>;
- virtual-reg = <a0000200>;
+ reg = <0x10000200 0x00000008>;
+ virtual-reg = <0xa0000200>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@10000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <10000300 8>;
- virtual-reg = <a0000300>;
+ reg = <0x10000300 0x00000008>;
+ virtual-reg = <0xa0000300>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@10000600 {
device_type = "serial";
compatible = "ns16550";
- reg = <10000600 8>;
- virtual-reg = <a0000600>;
+ reg = <0x10000600 0x00000008>;
+ virtual-reg = <0xa0000600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <5 4>;
+ interrupts = <0x5 0x4>;
};
IIC0: i2c@10000400 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
- reg = <10000400 14>;
+ reg = <0x10000400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@10000500 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
- reg = <10000500 14>;
+ reg = <0x10000500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
EMAC0: ethernet@10000800 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-440spe", "ibm,emac4";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <10000800 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0x10000800 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "gmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
@@ -231,23 +233,23 @@
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <c 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- c 0ed00000 4 /* Special cycles */
- c 0ec80000 100 /* Internal registers */
- c 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
- 01000000 0 00000000 0000000c 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0xf */
- bus-range = <0 f>;
+ bus-range = <0x0 0xf>;
/*
* On Katmai, the following PCI-X interrupts signals
@@ -258,13 +260,13 @@
* INTC: J2: 1-2
* INTD: J1: 1-2
*/
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 1 &UIC1 14 8
- 0800 0 0 2 &UIC1 13 8
- 0800 0 0 3 &UIC1 12 8
- 0800 0 0 4 &UIC1 11 8
+ 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+ 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+ 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+ 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
>;
};
@@ -275,23 +277,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <d 00000000 20000000 /* Config space access */
- c 10000000 00001000>; /* Registers */
- dcr-reg = <100 020>;
- sdr-base = <300>;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10000000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
- 01000000 0 00000000 0000000f 80000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
- bus-range = <10 1f>;
+ bus-range = <0x10 0x1f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -301,12 +303,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
@@ -316,23 +318,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <d 20000000 20000000 /* Config space access */
- c 10001000 00001000>; /* Registers */
- dcr-reg = <120 020>;
- sdr-base = <340>;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10001000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
- 01000000 0 00000000 0000000f 80010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
- bus-range = <20 2f>;
+ bus-range = <0x20 0x2f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -342,12 +344,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 4 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 5 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 6 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
};
PCIE2: pciex@d40000000 {
@@ -357,23 +359,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
- port = <2>; /* port number */
- reg = <d 40000000 20000000 /* Config space access */
- c 10002000 00001000>; /* Registers */
- dcr-reg = <140 020>;
- sdr-base = <370>;
+ port = <0x2>; /* port number */
+ reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10002000 0x00001000>; /* Registers */
+ dcr-reg = <0x140 0x020>;
+ sdr-base = <0x370>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
- 01000000 0 00000000 0000000f 80020000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
- bus-range = <30 3f>;
+ bus-range = <0x30 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -383,12 +385,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 8 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 9 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 a 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
};
};
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 48c9a6e71f1a..3ed6a8fee1d5 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -8,12 +8,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,kilauea";
compatible = "amcc,kilauea";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EX";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>; /* 16 kB */
- d-cache-size = <4000>; /* 16 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
@@ -43,14 +45,14 @@
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405ex", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -72,11 +74,11 @@
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -89,72 +91,72 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-405ex";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <80000000 80000000 10000000
- ef600000 ef600000 a00000
- f0000000 f0000000 10000000>;
- dcr-reg = <0a0 5>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405ex", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 200000>;
+ reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
- reg = <200000 200000>;
+ reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
- reg = <400000 3b60000>;
+ reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
@@ -162,68 +164,68 @@
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600200 8>;
- virtual-reg = <ef600200>;
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
+ interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600400 14>;
+ reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600500 14>;
+ reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
- reg = <ef600b00 104>;
+ reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600900 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
};
EMAC1: ethernet@ef600a00 {
- linux,network-index = <1>;
+ linux,network-index = <0x1>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600a00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600a00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <a0000000 20000000 /* Config space access */
- ef000000 00001000>; /* Registers */
- dcr-reg = <040 020>;
- sdr-base = <400>;
+ port = <0x0>; /* port number */
+ reg = <0xa0000000 0x20000000 /* Config space access */
+ 0xef000000 0x00001000>; /* Registers */
+ dcr-reg = <0x040 0x020>;
+ sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 90000000 0 08000000
- 01000000 0 00000000 e0000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
- bus-range = <00 3f>;
+ bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <c0000000 20000000 /* Config space access */
- ef001000 00001000>; /* Registers */
- dcr-reg = <060 020>;
- sdr-base = <440>;
+ port = <0x1>; /* port number */
+ reg = <0xc0000000 0x20000000 /* Config space access */
+ 0xef001000 0x00001000>; /* Registers */
+ dcr-reg = <0x060 0x020>;
+ sdr-base = <0x440>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 98000000 0 08000000
- 01000000 0 00000000 e0010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 b 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 c 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 d 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
};
};
};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 84cc5e72ddd8..1dfcd7ed199c 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -8,12 +8,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,makalu";
compatible = "amcc,makalu";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EX";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>; /* 16 kB */
- d-cache-size = <4000>; /* 16 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
@@ -43,14 +45,14 @@
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405ex", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -72,11 +74,11 @@
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -89,72 +91,72 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-405ex";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <80000000 80000000 10000000
- ef600000 ef600000 a00000
- f0000000 f0000000 10000000>;
- dcr-reg = <0a0 5>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405ex", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 200000>;
+ reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
- reg = <200000 200000>;
+ reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
- reg = <400000 3b60000>;
+ reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
@@ -162,68 +164,68 @@
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600200 8>;
- virtual-reg = <ef600200>;
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
+ interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600400 14>;
+ reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600500 14>;
+ reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
- reg = <ef600b00 104>;
+ reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600900 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <0000003f>; /* Start at 6 */
+ phy-map = <0x0000003f>; /* Start at 6 */
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
};
EMAC1: ethernet@ef600a00 {
- linux,network-index = <1>;
+ linux,network-index = <0x1>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600a00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600a00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <a0000000 20000000 /* Config space access */
- ef000000 00001000>; /* Registers */
- dcr-reg = <040 020>;
- sdr-base = <400>;
+ port = <0x0>; /* port number */
+ reg = <0xa0000000 0x20000000 /* Config space access */
+ 0xef000000 0x00001000>; /* Registers */
+ dcr-reg = <0x040 0x020>;
+ sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 90000000 0 08000000
- 01000000 0 00000000 e0000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
- bus-range = <00 3f>;
+ bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <c0000000 20000000 /* Config space access */
- ef001000 00001000>; /* Registers */
- dcr-reg = <060 020>;
- sdr-base = <440>;
+ port = <0x1>; /* port number */
+ reg = <0xc0000000 0x20000000 /* Config space access */
+ 0xef001000 0x00001000>; /* Registers */
+ dcr-reg = <0x060 0x020>;
+ sdr-base = <0x440>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 98000000 0 08000000
- 01000000 0 00000000 e0010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 b 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 c 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 d 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
};
};
};
diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts
index 379ded282d5e..96ba5b512afe 100644
--- a/arch/powerpc/boot/dts/ps3.dts
+++ b/arch/powerpc/boot/dts/ps3.dts
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/dts-v1/;
+
/ {
model = "SonyPS3";
compatible = "sony,ps3";
@@ -34,7 +36,7 @@
memory {
device_type = "memory";
- reg = <0 0 0 0>;
+ reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
};
/*
@@ -55,14 +57,14 @@
cpu@0 {
device_type = "cpu";
- reg = <0>;
- ibm,ppc-interrupt-server#s = <0 1>;
+ reg = <0x00000000>;
+ ibm,ppc-interrupt-server#s = <0x0 0x1>;
clock-frequency = <0>;
timebase-frequency = <0>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
- i-cache-line-size = <80>;
- d-cache-line-size = <80>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <128>;
+ d-cache-line-size = <128>;
};
};
};
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index 6a8fa7089ea2..2cd87f66f81f 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -12,12 +12,14 @@
*
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,rainier";
compatible = "amcc,rainier";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440GRx";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -49,14 +51,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440grx","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
compatible = "ibm,uic-440grx","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -78,22 +80,22 @@
compatible = "ibm,uic-440grx","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -105,80 +107,80 @@
SDRAM0: sdram {
compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440grx", "ibm,dma-4xx";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-440grx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440grx", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Kernel";
- reg = <0 180000>;
+ reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "ramdisk";
- reg = <180000 200000>;
+ reg = <0x00180000 0x00200000>;
};
partition@380000 {
label = "file system";
- reg = <380000 3aa0000>;
+ reg = <0x00380000 0x03aa0000>;
};
partition@3e20000 {
label = "kozio";
- reg = <3e20000 140000>;
+ reg = <0x03e20000 0x00140000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
@@ -187,69 +189,69 @@
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440grx", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440grx", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440grx", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601000 {
compatible = "ibm,rgmii-440grx", "ibm,rgmii";
- reg = <ef601000 8>;
+ reg = <0xef601000 0x00000008>;
has-mdio;
};
@@ -257,23 +259,23 @@
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
@@ -286,23 +288,23 @@
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
rgmii-device = <&RGMII0>;
@@ -319,24 +321,24 @@
#address-cells = <3>;
compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
primary;
- reg = <1 eec00000 8 /* Config space access */
- 1 eed00000 4 /* IACK */
- 1 eed00000 4 /* Special cycle */
- 1 ef400000 40>; /* Internal registers */
+ reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */
+ 0x00000001 0xeed00000 0x00000004 /* IACK */
+ 0x00000001 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000001 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 1 80000000 0 10000000
- 01000000 0 00000000 1 e8000000 0 00100000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x10000000
+ 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00100000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* All PCI interrupts are routed to IRQ 67 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
};
};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d67564bdfc..149dabc55217 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -12,12 +12,14 @@
*
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,sequoia";
compatible = "amcc,sequoia";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EPx";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -49,14 +51,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
@@ -78,22 +80,22 @@
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -105,44 +107,44 @@
SDRAM0: sdram {
compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440epx", "ibm,dma-4xx";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
USB1: usb@e0000400 {
compatible = "ohci-be";
- reg = <0 e0000400 60>;
+ reg = <0x00000000 0xe0000400 0x00000060>;
interrupt-parent = <&UIC0>;
- interrupts = <15 8>;
+ interrupts = <0x15 0x8>;
};
USB0: ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
- reg = <0 e0000300 90 0 e0000390 70>;
+ interrupts = <0x1a 0x4>;
+ reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
big-endian;
};
@@ -150,50 +152,50 @@
compatible = "ibm,opb-440epx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440epx", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Kernel";
- reg = <0 180000>;
+ reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "ramdisk";
- reg = <180000 200000>;
+ reg = <0x00180000 0x00200000>;
};
partition@380000 {
label = "file system";
- reg = <380000 3aa0000>;
+ reg = <0x00380000 0x03aa0000>;
};
partition@3e20000 {
label = "kozio";
- reg = <3e20000 140000>;
+ reg = <0x03e20000 0x00140000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
@@ -202,69 +204,69 @@
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440epx", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440epx", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440epx", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601000 {
compatible = "ibm,rgmii-440epx", "ibm,rgmii";
- reg = <ef601000 8>;
+ reg = <0xef601000 0x00000008>;
has-mdio;
};
@@ -272,23 +274,23 @@
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
@@ -301,23 +303,23 @@
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
rgmii-device = <&RGMII0>;
@@ -334,10 +336,10 @@
#address-cells = <3>;
compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
primary;
- reg = <1 eec00000 8 /* Config space access */
- 1 eed00000 4 /* IACK */
- 1 eed00000 4 /* Special cycle */
- 1 ef400000 40>; /* Internal registers */
+ reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */
+ 0x00000001 0xeed00000 0x00000004 /* IACK */
+ 0x00000001 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000001 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
@@ -347,16 +349,16 @@
* I/O 1 E800 0000 1 E800 FFFF 64KB
* I/O 1 E880 0000 1 EBFF FFFF 56MB
*/
- ranges = <02000000 0 80000000 1 80000000 0 40000000
- 01000000 0 00000000 1 e8000000 0 00010000
- 01000000 0 00000000 1 e8800000 0 03800000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+ 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+ 0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* All PCI interrupts are routed to IRQ 67 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
};
};
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index e808e1c5593a..dcb749884b6d 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -10,12 +10,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,taishan";
compatible = "amcc,taishan";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC2;
@@ -31,13 +33,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440GX";
- reg = <0>;
- clock-frequency = <2FAF0800>; // 800MHz
+ reg = <0x00000000>;
+ clock-frequency = <800000000>; // 800MHz
timebase-frequency = <0>; // Filled in by zImage
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <8000>; /* 32 kB */
- d-cache-size = <8000>; /* 32 kB */
+ i-cache-line-size = <50>;
+ d-cache-line-size = <50>;
+ i-cache-size = <32768>; /* 32 kB */
+ d-cache-size = <32768>; /* 32 kB */
dcr-controller;
dcr-access-method = "native";
};
@@ -45,7 +47,7 @@
memory {
device_type = "memory";
- reg = <0 0 0>; // Filled in by zImage
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
@@ -53,7 +55,7 @@
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <200 009>;
+ dcr-reg = <0x200 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <01 4 00 4>; /* cascade - first non-critical */
+ interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
interrupt-parent = <&UICB0>;
};
@@ -77,11 +79,11 @@
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <03 4 02 4>; /* cascade */
+ interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
interrupt-parent = <&UICB0>;
};
@@ -89,29 +91,29 @@
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <2>; /* was 1 */
- dcr-reg = <210 009>;
+ dcr-reg = <0x210 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <05 4 04 4>; /* cascade */
+ interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
interrupt-parent = <&UICB0>;
};
CPC0: cpc {
compatible = "ibm,cpc-440gp";
- dcr-reg = <0b0 003 0e0 010>;
+ dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
// FIXME: anything else?
};
L2C0: l2c {
compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
- dcr-reg = <20 8 /* Internal SRAM DCR's */
- 30 8>; /* L2 cache DCR's */
- cache-line-size = <20>; /* 32 bytes */
- cache-size = <40000>; /* L2, 256K */
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
interrupt-parent = <&UIC2>;
- interrupts = <17 1>;
+ interrupts = <0x17 0x1>;
};
plb {
@@ -119,41 +121,41 @@
#address-cells = <2>;
#size-cells = <1>;
ranges;
- clock-frequency = <9896800>; // 160MHz
+ clock-frequency = <160000000>; // 160MHz
SDRAM0: memory-controller {
compatible = "ibm,sdram-440gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
// FIXME: anything else?
};
SRAM0: sram {
compatible = "ibm,sram-440gp";
- dcr-reg = <020 8 00a 1>;
+ dcr-reg = <0x020 0x008 0x00a 0x001>;
};
DMA0: dma {
// FIXME: ???
compatible = "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <4>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
@@ -162,26 +164,26 @@
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
- dcr-reg = <090 00b>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ dcr-reg = <0x090 0x00b>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
- clock-frequency = <4C4B400>; // 80MHz
+ interrupts = <0x7 0x4>;
+ clock-frequency = <80000000>; // 80MHz
EBC0: ebc {
compatible = "ibm,ebc-440gx", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
- clock-frequency = <4C4B400>; // 80MHz
+ clock-frequency = <80000000>; // 80MHz
/* ranges property is supplied by zImage
* based on firmware's configuration of the
* EBC bridge */
- interrupts = <5 4>;
+ interrupts = <0x5 0x4>;
interrupt-parent = <&UIC1>;
/* TODO: Add other EBC devices */
@@ -192,103 +194,103 @@
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000200 8>;
- virtual-reg = <e0000200>;
- clock-frequency = <A8C000>;
- current-speed = <1C200>; /* 115200 */
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>; /* 115200 */
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@40000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000300 8>;
- virtual-reg = <e0000300>;
- clock-frequency = <A8C000>;
- current-speed = <1C200>; /* 115200 */
+ reg = <0x40000300 0x00000008>;
+ virtual-reg = <0xe0000300>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>; /* 115200 */
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@40000400 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000400 14>;
+ reg = <0x40000400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@40000500 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000500 14>;
+ reg = <0x40000500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
GPIO0: gpio@40000700 {
/* FIXME */
compatible = "ibm,gpio-440gp";
- reg = <40000700 20>;
+ reg = <0x40000700 0x00000020>;
};
ZMII0: emac-zmii@40000780 {
compatible = "ibm,zmii-440gx", "ibm,zmii";
- reg = <40000780 c>;
+ reg = <0x40000780 0x0000000c>;
};
RGMII0: emac-rgmii@40000790 {
compatible = "ibm,rgmii";
- reg = <40000790 8>;
+ reg = <0x40000790 0x00000008>;
};
TAH0: emac-tah@40000b50 {
compatible = "ibm,tah-440gx", "ibm,tah";
- reg = <40000b50 30>;
+ reg = <0x40000b50 0x00000030>;
};
TAH1: emac-tah@40000d50 {
compatible = "ibm,tah-440gx", "ibm,tah";
- reg = <40000d50 30>;
+ reg = <0x40000d50 0x00000030>;
};
EMAC0: ethernet@40000800 {
- unused = <1>;
+ unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0x40000800 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
EMAC1: ethernet@40000900 {
- unused = <1>;
+ unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <40000900 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0x40000900 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
@@ -297,18 +299,18 @@
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
- interrupts = <0 4 1 4>;
- reg = <40000c00 70>;
+ interrupts = <0x0 0x4 0x1 0x4>;
+ reg = <0x40000c00 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <2>;
mal-rx-channel = <2>;
cell-index = <2>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
@@ -321,18 +323,18 @@
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
- interrupts = <2 4 3 4>;
- reg = <40000e00 70>;
+ interrupts = <0x2 0x4 0x3 0x4>;
+ reg = <0x40000e00 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <3>;
mal-rx-channel = <3>;
cell-index = <3>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000003>;
+ phy-map = <0x00000003>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
@@ -344,9 +346,9 @@
GPT0: gpt@40000a00 {
/* FIXME */
- reg = <40000a00 d4>;
+ reg = <0x40000a00 0x000000d4>;
interrupt-parent = <&UIC0>;
- interrupts = <12 4 13 4 14 4 15 4 16 4>;
+ interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
};
};
@@ -360,34 +362,34 @@
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <2 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- 2 0ed00000 4 /* Special cycles */
- 2 0ec80000 100 /* Internal registers */
- 2 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x00000002 0x0ed00000 0x00000004 /* Special cycles */
+ 0x00000002 0x0ec80000 0x00000100 /* Internal registers */
+ 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 00000003 80000000 0 80000000
- 01000000 0 00000000 00000002 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 1 &UIC0 17 8
- 0800 0 0 2 &UIC0 18 8
- 0800 0 0 3 &UIC0 19 8
- 0800 0 0 4 &UIC0 1a 8
+ 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+ 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+ 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+ 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
/* IDSEL 2 */
- 1000 0 0 1 &UIC0 18 8
- 1000 0 0 2 &UIC0 19 8
- 1000 0 0 3 &UIC0 1a 8
- 1000 0 0 4 &UIC0 17 8
+ 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+ 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+ 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+ 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
>;
};
};
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index a328607c8f84..4a9f726ada13 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -9,12 +9,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "ibm,walnut";
compatible = "ibm,walnut";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,405GP";
- reg = <0>;
- clock-frequency = <bebc200>; /* Filled in by zImage */
+ reg = <0x00000000>;
+ clock-frequency = <200000000>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
dcr-controller;
dcr-access-method = "native";
};
@@ -43,14 +45,14 @@
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 9>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -65,63 +67,63 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL: mcmal {
compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <1>;
num-rx-chans = <1>;
interrupt-parent = <&UIC0>;
interrupts = <
- b 4 /* TXEOB */
- c 4 /* RXEOB */
- a 4 /* SERR */
- d 4 /* TXDE */
- e 4 /* RXDE */>;
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
};
POB0: opb {
compatible = "ibm,opb-405gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <ef600000 ef600000 a00000>;
- dcr-reg = <0a0 5>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by zImage */
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC: i2c@ef600500 {
compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <ef600500 11>;
+ reg = <0xef600500 0x00000011>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
GPIO: gpio@ef600700 {
compatible = "ibm,gpio-405gp";
- reg = <ef600700 20>;
+ reg = <0xef600700 0x00000020>;
};
EMAC: ethernet@ef600800 {
@@ -129,26 +131,26 @@
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
interrupts = <
- f 4 /* Ethernet */
- 9 4 /* Ethernet Wake Up */>;
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
- reg = <ef600800 70>;
+ reg = <0xef600800 0x00000070>;
mal-device = <&MAL>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
};
};
EBC0: ebc {
compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
/* The ranges property is supplied by the bootwrapper
@@ -158,18 +160,18 @@
clock-frequency = <0>; /* Filled in by zImage */
sram@0,0 {
- reg = <0 0 80000>;
+ reg = <0x00000000 0x00000000 0x00080000>;
};
flash@0,80000 {
compatible = "jedec-flash";
bank-width = <1>;
- reg = <0 80000 80000>;
+ reg = <0x00000000 0x00080000 0x00080000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "OpenBIOS";
- reg = <0 80000>;
+ reg = <0x00000000 0x00080000>;
read-only;
};
};
@@ -177,24 +179,24 @@
nvram@1,0 {
/* NVRAM and RTC */
compatible = "ds1743-nvram";
- #bytes = <2000>;
- reg = <1 0 2000>;
+ #bytes = <0x2000>;
+ reg = <0x00000001 0x00000000 0x00002000>;
};
keyboard@2,0 {
compatible = "intel,82C42PC";
- reg = <2 0 2>;
+ reg = <0x00000002 0x00000000 0x00000002>;
};
ir@3,0 {
compatible = "ti,TIR2000PAG";
- reg = <3 0 10>;
+ reg = <0x00000003 0x00000000 0x00000010>;
};
fpga@7,0 {
compatible = "Walnut-FPGA";
- reg = <7 0 10>;
- virtual-reg = <f0300005>;
+ reg = <0x00000007 0x00000000 0x00000010>;
+ virtual-reg = <0xf0300005>;
};
};
@@ -205,35 +207,35 @@
#address-cells = <3>;
compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
primary;
- reg = <eec00000 8 /* Config space access */
- eed80000 4 /* IACK */
- eed80000 4 /* Special cycle */
- ef480000 40>; /* Internal registers */
+ reg = <0xeec00000 0x00000008 /* Config space access */
+ 0xeed80000 0x00000004 /* IACK */
+ 0xeed80000 0x00000004 /* Special cycle */
+ 0xef480000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* Walnut has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 1c 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 1d 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 1e 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 1f 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
>;
};
};
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index b04a52e22bf5..c52e4fb89abf 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -9,12 +9,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "pika,warp";
compatible = "pika,warp";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -42,14 +44,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -59,22 +61,22 @@
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -86,86 +88,86 @@
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
};
POB0: opb {
compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 0 00000000 80000000
- 80000000 0 80000000 80000000>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+ 0x80000000 0x00000000 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
fpga@2,0 {
compatible = "pika,fpga";
- reg = <2 0 2200>;
- interrupts = <18 8>;
+ reg = <0x00000002 0x00000000 0x00002200>;
+ interrupts = <0x18 0x8>;
interrupt-parent = <&UIC0>;
};
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 0 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 180000>;
+ reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "root";
- reg = <180000 3480000>;
+ reg = <0x00180000 0x03480000>;
};
partition@3600000 {
label = "user";
- reg = <3600000 900000>;
+ reg = <0x03600000 0x00900000>;
};
partition@3f00000 {
label = "fpga";
- reg = <3f00000 40000>;
+ reg = <0x03f00000 0x00040000>;
};
partition@3f40000 {
label = "env";
- reg = <3f40000 40000>;
+ reg = <0x03f40000 0x00040000>;
};
partition@3f80000 {
label = "u-boot";
- reg = <3f80000 80000>;
+ reg = <0x03f80000 0x00080000>;
};
};
};
@@ -173,60 +175,60 @@
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
GPIO0: gpio@ef600b00 {
compatible = "ibm,gpio-440ep";
- reg = <ef600b00 48>;
+ reg = <0xef600b00 0x00000048>;
};
GPIO1: gpio@ef600c00 {
compatible = "ibm,gpio-440ep";
- reg = <ef600c00 48>;
+ reg = <0xef600c00 0x00000048>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <ef600e00 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
usb@ef601000 {
compatible = "ohci-be";
- reg = <ef601000 80>;
- interrupts = <8 1 9 1>;
+ reg = <0xef601000 0x00000080>;
+ interrupts = <0x8 0x1 0x9 0x1>;
interrupt-parent = < &UIC1 >;
};
};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 0d6d332814e0..e39422aa0d85 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -9,12 +9,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,yosemite";
compatible = "amcc,yosemite","amcc,bamboo";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
@@ -46,14 +48,14 @@
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -63,22 +65,22 @@
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
@@ -90,29 +92,29 @@
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
};
POB0: opb {
@@ -122,110 +124,110 @@
/* Bamboo is oddball in the 44x world and doesn't use the ERPN
* bits.
*/
- ranges = <00000000 0 00000000 80000000
- 80000000 0 80000000 80000000>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+ 0x80000000 0x00000000 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
status = "disabled";
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
status = "disabled";
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
spi@ef600900 {
compatible = "amcc,spi-440ep";
- reg = <ef600900 6>;
- interrupts = <8 4>;
+ reg = <0xef600900 0x00000006>;
+ interrupts = <0x8 0x4>;
interrupt-parent = <&UIC0>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <ef600e00 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
@@ -234,26 +236,26 @@
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <ef600f00 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
usb@ef601000 {
compatible = "ohci-be";
- reg = <ef601000 80>;
- interrupts = <8 4 9 4>;
+ reg = <0xef601000 0x00000080>;
+ interrupts = <0x8 0x4 0x9 0x4>;
interrupt-parent = < &UIC1 >;
};
};
@@ -265,35 +267,35 @@
#address-cells = <3>;
compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
primary;
- reg = <0 eec00000 8 /* Config space access */
- 0 eed00000 4 /* IACK */
- 0 eed00000 4 /* Special cycle */
- 0 ef400000 40>; /* Internal registers */
+ reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */
+ 0x00000000 0xeed00000 0x00000004 /* IACK */
+ 0x00000000 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000000 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 a0000000 0 a0000000 0 20000000
- 01000000 0 00000000 0 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* Bamboo has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 1c 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 1b 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 1a 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 19 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
>;
};
};