diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/oprofile/common.c | 214 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/op_model_fsl_booke.c | 183 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/op_model_power4.c | 309 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/op_model_rs64.c | 218 |
4 files changed, 924 insertions, 0 deletions
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c new file mode 100644 index 000000000000..486314a0defd --- /dev/null +++ b/arch/powerpc/oprofile/common.c @@ -0,0 +1,214 @@ +/* + * PPC 64 oprofile support: + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * PPC 32 oprofile support: (based on PPC 64 support) + * Copyright (C) Freescale Semiconductor, Inc 2004 + * Author: Andy Fleming + * + * Based on alpha version. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#ifndef __powerpc64__ +#include <linux/slab.h> +#endif /* ! __powerpc64__ */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#ifdef __powerpc64__ +#include <asm/pmc.h> +#else /* __powerpc64__ */ +#include <asm/perfmon.h> +#endif /* __powerpc64__ */ +#include <asm/cputable.h> +#include <asm/oprofile_impl.h> + +static struct op_powerpc_model *model; + +static struct op_counter_config ctr[OP_MAX_COUNTER]; +static struct op_system_config sys; + +#ifndef __powerpc64__ +static char *cpu_type; +#endif /* ! __powerpc64__ */ + +static void op_handle_interrupt(struct pt_regs *regs) +{ + model->handle_interrupt(regs, ctr); +} + +static int op_powerpc_setup(void) +{ +#ifdef __powerpc64__ + int err; + + /* Grab the hardware */ + err = reserve_pmc_hardware(op_handle_interrupt); + if (err) + return err; +#else /* __powerpc64__ */ + /* Install our interrupt handler into the existing hook. */ + if (request_perfmon_irq(&op_handle_interrupt)) + return -EBUSY; + mb(); +#endif /* __powerpc64__ */ + + /* Pre-compute the values to stuff in the hardware registers. */ + model->reg_setup(ctr, &sys, model->num_counters); + + /* Configure the registers on all cpus. */ +#ifdef __powerpc64__ + on_each_cpu(model->cpu_setup, NULL, 0, 1); +#else /* __powerpc64__ */ +#if 0 + /* FIXME: Make multi-cpu work */ + on_each_cpu(model->reg_setup, NULL, 0, 1); +#endif +#endif /* __powerpc64__ */ + + return 0; +} + +static void op_powerpc_shutdown(void) +{ +#ifdef __powerpc64__ + release_pmc_hardware(); +#else /* __powerpc64__ */ + mb(); + /* Remove our interrupt handler. We may be removing this module. */ + free_perfmon_irq(); +#endif /* __powerpc64__ */ +} + +static void op_powerpc_cpu_start(void *dummy) +{ + model->start(ctr); +} + +static int op_powerpc_start(void) +{ + on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1); + return 0; +} + +static inline void op_powerpc_cpu_stop(void *dummy) +{ + model->stop(); +} + +static void op_powerpc_stop(void) +{ + on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1); +} + +static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) +{ + int i; + +#ifdef __powerpc64__ + /* + * There is one mmcr0, mmcr1 and mmcra for setting the events for + * all of the counters. + */ + oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0); + oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1); + oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra); +#endif /* __powerpc64__ */ + + for (i = 0; i < model->num_counters; ++i) { + struct dentry *dir; + char buf[3]; + + snprintf(buf, sizeof buf, "%d", i); + dir = oprofilefs_mkdir(sb, root, buf); + + oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); + oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); +#ifdef __powerpc64__ + /* + * We dont support per counter user/kernel selection, but + * we leave the entries because userspace expects them + */ +#endif /* __powerpc64__ */ + oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); + +#ifndef __powerpc64__ + /* FIXME: Not sure if this is used */ +#endif /* ! __powerpc64__ */ + oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); + } + + oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); + oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); +#ifdef __powerpc64__ + oprofilefs_create_ulong(sb, root, "backtrace_spinlocks", + &sys.backtrace_spinlocks); +#endif /* __powerpc64__ */ + + /* Default to tracing both kernel and user */ + sys.enable_kernel = 1; + sys.enable_user = 1; +#ifdef __powerpc64__ + /* Turn on backtracing through spinlocks by default */ + sys.backtrace_spinlocks = 1; +#endif /* __powerpc64__ */ + + return 0; +} + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ +#ifndef __powerpc64__ + int cpu_id = smp_processor_id(); + +#ifdef CONFIG_FSL_BOOKE + model = &op_model_fsl_booke; +#else + return -ENODEV; +#endif + + cpu_type = kmalloc(32, GFP_KERNEL); + if (NULL == cpu_type) + return -ENOMEM; + + sprintf(cpu_type, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name); + + model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs; + + ops->cpu_type = cpu_type; +#else /* __powerpc64__ */ + if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type) + return -ENODEV; + model = cur_cpu_spec->oprofile_model; + model->num_counters = cur_cpu_spec->num_pmcs; + + ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; +#endif /* __powerpc64__ */ + ops->create_files = op_powerpc_create_files; + ops->setup = op_powerpc_setup; + ops->shutdown = op_powerpc_shutdown; + ops->start = op_powerpc_start; + ops->stop = op_powerpc_stop; + + printk(KERN_INFO "oprofile: using %s performance monitoring.\n", + ops->cpu_type); + + return 0; +} + +void oprofile_arch_exit(void) +{ +#ifndef __powerpc64__ + kfree(cpu_type); + cpu_type = NULL; +#endif /* ! __powerpc64__ */ +} diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c new file mode 100644 index 000000000000..1917f8df8a8b --- /dev/null +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -0,0 +1,183 @@ +/* + * oprofile/op_model_e500.c + * + * Freescale Book-E oprofile support, based on ppc64 oprofile support + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * Copyright (c) 2004 Freescale Semiconductor, Inc + * + * Author: Andy Fleming + * Maintainer: Kumar Gala <Kumar.Gala@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/reg_booke.h> +#include <asm/page.h> +#include <asm/perfmon.h> +#include <asm/oprofile_impl.h> + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int num_counters; +static int oprofile_running; + +static inline unsigned int ctr_read(unsigned int i) +{ + switch(i) { + case 0: + return mfpmr(PMRN_PMC0); + case 1: + return mfpmr(PMRN_PMC1); + case 2: + return mfpmr(PMRN_PMC2); + case 3: + return mfpmr(PMRN_PMC3); + default: + return 0; + } +} + +static inline void ctr_write(unsigned int i, unsigned int val) +{ + switch(i) { + case 0: + mtpmr(PMRN_PMC0, val); + break; + case 1: + mtpmr(PMRN_PMC1, val); + break; + case 2: + mtpmr(PMRN_PMC2, val); + break; + case 3: + mtpmr(PMRN_PMC3, val); + break; + default: + break; + } +} + + +static void fsl_booke_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + num_counters = num_ctrs; + + /* freeze all counters */ + pmc_stop_ctrs(); + + /* Our counters count up, and "count" refers to + * how much before the next interrupt, and we interrupt + * on overflow. So we calculate the starting value + * which will give us "count" until overflow. + * Then we set the events on the enabled counters */ + for (i = 0; i < num_counters; ++i) { + reset_value[i] = 0x80000000UL - ctr[i].count; + + init_pmc_stop(i); + + set_pmc_event(i, ctr[i].event); + + set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel); + } +} + +static void fsl_booke_start(struct op_counter_config *ctr) +{ + int i; + + mtmsr(mfmsr() | MSR_PMM); + + for (i = 0; i < num_counters; ++i) { + if (ctr[i].enabled) { + ctr_write(i, reset_value[i]); + /* Set Each enabled counterd to only + * count when the Mark bit is not set */ + set_pmc_marked(i, 1, 0); + pmc_start_ctr(i, 1); + } else { + ctr_write(i, 0); + + /* Set the ctr to be stopped */ + pmc_start_ctr(i, 0); + } + } + + /* Clear the freeze bit, and enable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(1); + + oprofile_running = 1; + + pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(), + mfpmr(PMRN_PMGC0)); +} + +static void fsl_booke_stop(void) +{ + /* freeze counters */ + pmc_stop_ctrs(); + + oprofile_running = 0; + + pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(), + mfpmr(PMRN_PMGC0)); + + mb(); +} + + +static void fsl_booke_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + + /* set the PMM bit (see comment below) */ + mtmsr(mfmsr() | MSR_PMM); + + pc = regs->nip; + is_kernel = (pc >= KERNELBASE); + + for (i = 0; i < num_counters; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + /* The freeze bit was set by the interrupt. */ + /* Clear the freeze bit, and reenable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(1); +} + +struct op_powerpc_model op_model_fsl_booke = { + .reg_setup = fsl_booke_reg_setup, + .start = fsl_booke_start, + .stop = fsl_booke_stop, + .handle_interrupt = fsl_booke_handle_interrupt, +}; diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c new file mode 100644 index 000000000000..886449315847 --- /dev/null +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/systemcfg.h> +#include <asm/rtas.h> +#include <asm/oprofile_impl.h> + +#define dbg(args...) + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int oprofile_running; +static int mmcra_has_sihv; + +/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ +static u32 mmcr0_val; +static u64 mmcr1_val; +static u32 mmcra_val; + +/* + * Since we do not have an NMI, backtracing through spinlocks is + * only a best guess. In light of this, allow it to be disabled at + * runtime. + */ +static int backtrace_spinlocks; + +static void power4_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + /* + * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above. + * However we disable it on all POWER4 until we verify it works + * (I was seeing some strange behaviour last time I tried). + * + * It has been verified to work on POWER5 so we enable it there. + */ + if (cpu_has_feature(CPU_FTR_MMCRA_SIHV)) + mmcra_has_sihv = 1; + + /* + * The performance counter event settings are given in the mmcr0, + * mmcr1 and mmcra values passed from the user in the + * op_system_config structure (sys variable). + */ + mmcr0_val = sys->mmcr0; + mmcr1_val = sys->mmcr1; + mmcra_val = sys->mmcra; + + backtrace_spinlocks = sys->backtrace_spinlocks; + + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + /* setup user and kernel profiling */ + if (sys->enable_kernel) + mmcr0_val &= ~MMCR0_KERNEL_DISABLE; + else + mmcr0_val |= MMCR0_KERNEL_DISABLE; + + if (sys->enable_user) + mmcr0_val &= ~MMCR0_PROBLEM_DISABLE; + else + mmcr0_val |= MMCR0_PROBLEM_DISABLE; +} + +extern void ppc64_enable_pmcs(void); + +static void power4_cpu_setup(void *unused) +{ + unsigned int mmcr0 = mmcr0_val; + unsigned long mmcra = mmcra_val; + + ppc64_enable_pmcs(); + + /* set the freeze bit */ + mmcr0 |= MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; + mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; + mtspr(SPRN_MMCR0, mmcr0); + + mtspr(SPRN_MMCR1, mmcr1_val); + + mmcra |= MMCRA_SAMPLE_ENABLE; + mtspr(SPRN_MMCRA, mmcra); + + dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), + mfspr(SPRN_MMCR0)); + dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), + mfspr(SPRN_MMCR1)); + dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(), + mfspr(SPRN_MMCRA)); +} + +static void power4_start(struct op_counter_config *ctr) +{ + int i; + unsigned int mmcr0; + + /* set the PMM bit (see comment below) */ + mtmsrd(mfmsr() | MSR_PMM); + + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { + if (ctr[i].enabled) { + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + + mmcr0 = mfspr(SPRN_MMCR0); + + /* + * We must clear the PMAO bit on some (GQ) chips. Just do it + * all the time + */ + mmcr0 &= ~MMCR0_PMAO; + + /* + * now clear the freeze bit, counting will not start until we + * rfid from this excetion, because only at that point will + * the PMM bit be cleared + */ + mmcr0 &= ~MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + oprofile_running = 1; + + dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); +} + +static void power4_stop(void) +{ + unsigned int mmcr0; + + /* freeze counters */ + mmcr0 = mfspr(SPRN_MMCR0); + mmcr0 |= MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + oprofile_running = 0; + + dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); + + mb(); +} + +/* Fake functions used by canonicalize_pc */ +static void __attribute_used__ hypervisor_bucket(void) +{ +} + +static void __attribute_used__ rtas_bucket(void) +{ +} + +static void __attribute_used__ kernel_unknown_bucket(void) +{ +} + +static unsigned long check_spinlock_pc(struct pt_regs *regs, + unsigned long profile_pc) +{ + unsigned long pc = instruction_pointer(regs); + + /* + * If both the SIAR (sampled instruction) and the perfmon exception + * occurred in a spinlock region then we account the sample to the + * calling function. This isnt 100% correct, we really need soft + * IRQ disable so we always get the perfmon exception at the + * point at which the SIAR is set. + */ + if (backtrace_spinlocks && in_lock_functions(pc) && + in_lock_functions(profile_pc)) + return regs->link; + else + return profile_pc; +} + +/* + * On GQ and newer the MMCRA stores the HV and PR bits at the time + * the SIAR was sampled. We use that to work out if the SIAR was sampled in + * the hypervisor, our exception vectors or RTAS. + */ +static unsigned long get_pc(struct pt_regs *regs) +{ + unsigned long pc = mfspr(SPRN_SIAR); + unsigned long mmcra; + + /* Cant do much about it */ + if (!mmcra_has_sihv) + return check_spinlock_pc(regs, pc); + + mmcra = mfspr(SPRN_MMCRA); + + /* Were we in the hypervisor? */ + if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && + (mmcra & MMCRA_SIHV)) + /* function descriptor madness */ + return *((unsigned long *)hypervisor_bucket); + + /* We were in userspace, nothing to do */ + if (mmcra & MMCRA_SIPR) + return pc; + +#ifdef CONFIG_PPC_RTAS + /* Were we in RTAS? */ + if (pc >= rtas.base && pc < (rtas.base + rtas.size)) + /* function descriptor madness */ + return *((unsigned long *)rtas_bucket); +#endif + + /* Were we in our exception vectors or SLB real mode miss handler? */ + if (pc < 0x1000000UL) + return (unsigned long)__va(pc); + + /* Not sure where we were */ + if (pc < KERNELBASE) + /* function descriptor madness */ + return *((unsigned long *)kernel_unknown_bucket); + + return check_spinlock_pc(regs, pc); +} + +static int get_kernel(unsigned long pc) +{ + int is_kernel; + + if (!mmcra_has_sihv) { + is_kernel = (pc >= KERNELBASE); + } else { + unsigned long mmcra = mfspr(SPRN_MMCRA); + is_kernel = ((mmcra & MMCRA_SIPR) == 0); + } + + return is_kernel; +} + +static void power4_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + unsigned int mmcr0; + + pc = get_pc(regs); + is_kernel = get_kernel(pc); + + /* set the PMM bit (see comment below) */ + mtmsrd(mfmsr() | MSR_PMM); + + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + mmcr0 = mfspr(SPRN_MMCR0); + + /* reset the perfmon trigger */ + mmcr0 |= MMCR0_PMXE; + + /* + * We must clear the PMAO bit on some (GQ) chips. Just do it + * all the time + */ + mmcr0 &= ~MMCR0_PMAO; + + /* + * now clear the freeze bit, counting will not start until we + * rfid from this exception, because only at that point will + * the PMM bit be cleared + */ + mmcr0 &= ~MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); +} + +struct op_powerpc_model op_model_power4 = { + .reg_setup = power4_reg_setup, + .cpu_setup = power4_cpu_setup, + .start = power4_start, + .stop = power4_stop, + .handle_interrupt = power4_handle_interrupt, +}; diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c new file mode 100644 index 000000000000..e010b85996e8 --- /dev/null +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/oprofile_impl.h> + +#define dbg(args...) + +static void ctrl_write(unsigned int i, unsigned int val) +{ + unsigned int tmp = 0; + unsigned long shift = 0, mask = 0; + + dbg("ctrl_write %d %x\n", i, val); + + switch(i) { + case 0: + tmp = mfspr(SPRN_MMCR0); + shift = 6; + mask = 0x7F; + break; + case 1: + tmp = mfspr(SPRN_MMCR0); + shift = 0; + mask = 0x3F; + break; + case 2: + tmp = mfspr(SPRN_MMCR1); + shift = 31 - 4; + mask = 0x1F; + break; + case 3: + tmp = mfspr(SPRN_MMCR1); + shift = 31 - 9; + mask = 0x1F; + break; + case 4: + tmp = mfspr(SPRN_MMCR1); + shift = 31 - 14; + mask = 0x1F; + break; + case 5: + tmp = mfspr(SPRN_MMCR1); + shift = 31 - 19; + mask = 0x1F; + break; + case 6: + tmp = mfspr(SPRN_MMCR1); + shift = 31 - 24; + mask = 0x1F; + break; + case 7: + tmp = mfspr(SPRN_MMCR1); + shift = 31 - 28; + mask = 0xF; + break; + } + + tmp = tmp & ~(mask << shift); + tmp |= val << shift; + + switch(i) { + case 0: + case 1: + mtspr(SPRN_MMCR0, tmp); + break; + default: + mtspr(SPRN_MMCR1, tmp); + } + + dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0), + mfspr(SPRN_MMCR1)); +} + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int num_counters; + +static void rs64_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + num_counters = num_ctrs; + + for (i = 0; i < num_counters; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + /* XXX setup user and kernel profiling */ +} + +static void rs64_cpu_setup(void *unused) +{ + unsigned int mmcr0; + + /* reset MMCR0 and set the freeze bit */ + mmcr0 = MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + /* reset MMCR1, MMCRA */ + mtspr(SPRN_MMCR1, 0); + + if (cpu_has_feature(CPU_FTR_MMCRA)) + mtspr(SPRN_MMCRA, 0); + + mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; + /* Only applies to POWER3, but should be safe on RS64 */ + mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; + mtspr(SPRN_MMCR0, mmcr0); + + dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), + mfspr(SPRN_MMCR0)); + dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), + mfspr(SPRN_MMCR1)); +} + +static void rs64_start(struct op_counter_config *ctr) +{ + int i; + unsigned int mmcr0; + + /* set the PMM bit (see comment below) */ + mtmsrd(mfmsr() | MSR_PMM); + + for (i = 0; i < num_counters; ++i) { + if (ctr[i].enabled) { + ctr_write(i, reset_value[i]); + ctrl_write(i, ctr[i].event); + } else { + ctr_write(i, 0); + } + } + + mmcr0 = mfspr(SPRN_MMCR0); + + /* + * now clear the freeze bit, counting will not start until we + * rfid from this excetion, because only at that point will + * the PMM bit be cleared + */ + mmcr0 &= ~MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); +} + +static void rs64_stop(void) +{ + unsigned int mmcr0; + + /* freeze counters */ + mmcr0 = mfspr(SPRN_MMCR0); + mmcr0 |= MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); + + mb(); +} + +static void rs64_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned int mmcr0; + int val; + int i; + unsigned long pc = mfspr(SPRN_SIAR); + int is_kernel = (pc >= KERNELBASE); + + /* set the PMM bit (see comment below) */ + mtmsrd(mfmsr() | MSR_PMM); + + for (i = 0; i < num_counters; ++i) { + val = ctr_read(i); + if (val < 0) { + if (ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + mmcr0 = mfspr(SPRN_MMCR0); + + /* reset the perfmon trigger */ + mmcr0 |= MMCR0_PMXE; + + /* + * now clear the freeze bit, counting will not start until we + * rfid from this exception, because only at that point will + * the PMM bit be cleared + */ + mmcr0 &= ~MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); +} + +struct op_powerpc_model op_model_rs64 = { + .reg_setup = rs64_reg_setup, + .cpu_setup = rs64_cpu_setup, + .start = rs64_start, + .stop = rs64_stop, + .handle_interrupt = rs64_handle_interrupt, +}; |