summaryrefslogtreecommitdiffstats
path: root/arch/ppc/8xx_io
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/8xx_io')
-rw-r--r--arch/ppc/8xx_io/Kconfig4
-rw-r--r--arch/ppc/8xx_io/commproc.c20
-rw-r--r--arch/ppc/8xx_io/enet.c52
-rw-r--r--arch/ppc/8xx_io/fec.c43
4 files changed, 73 insertions, 46 deletions
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig
index 9e2227ec3b34..57dacf978532 100644
--- a/arch/ppc/8xx_io/Kconfig
+++ b/arch/ppc/8xx_io/Kconfig
@@ -69,9 +69,9 @@ config FEC_QS6612
config ENET_BIG_BUFFERS
bool "Use Big CPM Ethernet Buffers"
- depends on NET_ETHERNET
+ depends on SCC_ENET || FEC_ENET
help
- Allocate large buffers for MPC8xx Etherenet. Increases throughput
+ Allocate large buffers for MPC8xx Ethernet. Increases throughput
and decreases the likelihood of dropped packets, but costs memory.
config HTDMSOUND
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 0cc2e7a9cb11..11726e2a4ec8 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -39,8 +39,6 @@
#include <asm/tlbflush.h>
#include <asm/rheap.h>
-extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
-
static void m8xx_cpm_dpinit(void);
static uint host_buffer; /* One page of host buffer */
static uint host_end; /* end + 1 */
@@ -108,14 +106,11 @@ struct hw_interrupt_type cpm_pic = {
.end = cpm_eoi,
};
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
-
void
-m8xx_cpm_reset(uint bootpage)
+m8xx_cpm_reset(void)
{
volatile immap_t *imp;
volatile cpm8xx_t *commproc;
- pte_t *pte;
imp = (immap_t *)IMAP_ADDR;
commproc = (cpm8xx_t *)&imp->im_cpm;
@@ -143,17 +138,6 @@ m8xx_cpm_reset(uint bootpage)
/* Reclaim the DP memory for our use. */
m8xx_cpm_dpinit();
- /* get the PTE for the bootpage */
- if (!get_pteptr(&init_mm, bootpage, &pte))
- panic("get_pteptr failed\n");
-
- /* and make it uncachable */
- pte_val(*pte) |= _PAGE_NO_CACHE;
- _tlbie(bootpage);
-
- host_buffer = bootpage;
- host_end = host_buffer + PAGE_SIZE;
-
/* Tell everyone where the comm processor resides.
*/
cpmp = (cpm8xx_t *)commproc;
@@ -384,8 +368,6 @@ static rh_info_t cpm_dpmem_info;
void m8xx_cpm_dpinit(void)
{
- cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm;
-
spin_lock_init(&cpm_dpmem_lock);
/* Initialize the info header */
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
index 4ea7158e5062..ece6a9fbe09b 100644
--- a/arch/ppc/8xx_io/enet.c
+++ b/arch/ppc/8xx_io/enet.c
@@ -714,16 +714,24 @@ static int __init scc_enet_init(void)
immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
#endif /* PC_ENET_LBK */
- /* Configure port C pins to enable CLSN and RENA.
+#ifdef PE_ENET_TCLK
+ /* Configure port E for TCLK and RCLK.
*/
- immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
-
+ cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK);
+ cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
+ cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
+#else
/* Configure port A for TCLK and RCLK.
*/
immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+#endif
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
/* Configure Serial Interface clock routing.
* First, clear all SCC bits to zero, then set the ones we want.
@@ -896,14 +904,18 @@ static int __init scc_enet_init(void)
/* It is now OK to enable the Ethernet transmitter.
* Unfortunately, there are board implementation differences here.
*/
-#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA))
+#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
immap->im_ioport.iop_pcpar |= PC_ENET_TENA;
immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA))
+#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
cp->cp_pbpar |= PB_ENET_TENA;
cp->cp_pbdir |= PB_ENET_TENA;
+#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA))
+ cp->cp_pepar |= PE_ENET_TENA;
+ cp->cp_pedir &= ~PE_ENET_TENA;
+ cp->cp_peso |= PE_ENET_TENA;
#else
-#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA
+#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA
#endif
#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
@@ -936,6 +948,29 @@ static int __init scc_enet_init(void)
*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
#endif
+#ifdef CONFIG_MPC885ADS
+
+ /* Deassert PHY reset and enable the PHY.
+ */
+ {
+ volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE);
+ uint tmp;
+
+ tmp = in_be32(bcsr + 1 /* BCSR1 */);
+ tmp |= BCSR1_ETHEN;
+ out_be32(bcsr + 1, tmp);
+ tmp = in_be32(bcsr + 4 /* BCSR4 */);
+ tmp |= BCSR4_ETH10_RST;
+ out_be32(bcsr + 4, tmp);
+ iounmap(bcsr);
+ }
+
+ /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode
+ * upon reset. SCC is set to half duplex by default. So this
+ * inconsistency should be better fixed by the software.
+ */
+#endif
+
dev->base_addr = (unsigned long)ep;
#if 0
dev->name = "CPM_ENET";
@@ -969,3 +1004,4 @@ static int __init scc_enet_init(void)
}
module_init(scc_enet_init);
+
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index 0730392dcc20..62f68d6181c6 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -173,7 +173,7 @@ struct fec_enet_private {
uint phy_status;
uint phy_speed;
phy_info_t *phy;
- struct tq_struct phy_task;
+ struct work_struct phy_task;
uint sequence_done;
@@ -199,7 +199,8 @@ static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
#ifdef CONFIG_USE_MDIO
static void fec_enet_mii(struct net_device *dev);
#endif /* CONFIG_USE_MDIO */
-static void fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+static irqreturn_t fec_enet_interrupt(int irq, void * dev_id,
+ struct pt_regs * regs);
#ifdef CONFIG_FEC_PACKETHOOK
static void fec_enet_tx(struct net_device *dev, __u32 regval);
static void fec_enet_rx(struct net_device *dev, __u32 regval);
@@ -471,7 +472,7 @@ fec_timeout(struct net_device *dev)
/* The interrupt handler.
* This is called from the MPC core interrupt.
*/
-static void
+static irqreturn_t
fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
{
struct net_device *dev = dev_id;
@@ -525,6 +526,7 @@ printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTIO
}
}
+ return IRQ_RETVAL(IRQ_HANDLED);
}
@@ -1263,8 +1265,9 @@ static void mii_display_status(struct net_device *dev)
printk(".\n");
}
-static void mii_display_config(struct net_device *dev)
+static void mii_display_config(void *priv)
{
+ struct net_device *dev = (struct net_device *)priv;
struct fec_enet_private *fep = dev->priv;
volatile uint *s = &(fep->phy_status);
@@ -1294,8 +1297,9 @@ static void mii_display_config(struct net_device *dev)
fep->sequence_done = 1;
}
-static void mii_relink(struct net_device *dev)
+static void mii_relink(void *priv)
{
+ struct net_device *dev = (struct net_device *)priv;
struct fec_enet_private *fep = dev->priv;
int duplex;
@@ -1323,18 +1327,16 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev)
{
struct fec_enet_private *fep = dev->priv;
- fep->phy_task.routine = (void *)mii_relink;
- fep->phy_task.data = dev;
- schedule_task(&fep->phy_task);
+ INIT_WORK(&fep->phy_task, mii_relink, (void *)dev);
+ schedule_work(&fep->phy_task);
}
static void mii_queue_config(uint mii_reg, struct net_device *dev)
{
struct fec_enet_private *fep = dev->priv;
- fep->phy_task.routine = (void *)mii_display_config;
- fep->phy_task.data = dev;
- schedule_task(&fep->phy_task);
+ INIT_WORK(&fep->phy_task, mii_display_config, (void *)dev);
+ schedule_work(&fep->phy_task);
}
@@ -1403,11 +1405,11 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
/* This interrupt occurs when the PHY detects a link change.
*/
-static void
+static
#ifdef CONFIG_RPXCLASSIC
-mii_link_interrupt(void *dev_id)
+void mii_link_interrupt(void *dev_id)
#else
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+irqreturn_t mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
#endif
{
#ifdef CONFIG_USE_MDIO
@@ -1440,6 +1442,9 @@ mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
#endif /* CONFIG_USE_MDIO */
+#ifndef CONFIG_RPXCLASSIC
+ return IRQ_RETVAL(IRQ_HANDLED);
+#endif /* CONFIG_RPXCLASSIC */
}
static int
@@ -1575,7 +1580,7 @@ static int __init fec_enet_init(void)
struct fec_enet_private *fep;
int i, j, k, err;
unsigned char *eap, *iap, *ba;
- unsigned long mem_addr;
+ dma_addr_t mem_addr;
volatile cbd_t *bdp;
cbd_t *cbd_base;
volatile immap_t *immap;
@@ -1640,7 +1645,8 @@ static int __init fec_enet_init(void)
printk("FEC initialization failed.\n");
return 1;
}
- cbd_base = (cbd_t *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr);
+ cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE,
+ &mem_addr, GFP_KERNEL);
/* Set receive and transmit descriptor base.
*/
@@ -1657,7 +1663,10 @@ static int __init fec_enet_init(void)
/* Allocate a page.
*/
- ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr);
+ ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev,
+ PAGE_SIZE,
+ &mem_addr,
+ GFP_KERNEL);
/* BUG: no check for failure */
/* Initialize the BD for every fragment in the page.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 22:36:01 +0100