1 files changed, 0 insertions, 91 deletions
diff --git a/arch/ppc/platforms/rpxlite.h b/arch/ppc/platforms/rpxlite.h
deleted file mode 100644
index b615501d55fc..000000000000
--- a/arch/ppc/platforms/rpxlite.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Lite board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0x04400000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_LEDOFF		((uint)0x08000000)
-#define BCSR0_USBDISABLE	((uint)0x04000000)
-#define BCSR0_USBHISPEED	((uint)0x02000000)
-#define BCSR0_USBPWREN		((uint)0x01000000)
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)
-
-#define BCSR1_IPB5SEL          ((uint)0x00100000)
-#define BCSR1_PCVCTL4          ((uint)0x00080000)
-#define BCSR1_PCVCTL5          ((uint)0x00040000)
-#define BCSR1_PCVCTL6          ((uint)0x00020000)
-#define BCSR1_PCVCTL7          ((uint)0x00010000)
-
-/* define IO_BASE for pcmcia */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-
-/* CPM Ethernet through SCCx.
- *
- * This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */