diff options
Diffstat (limited to 'arch/ppc64')
85 files changed, 3860 insertions, 2044 deletions
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 5cb343883e4d..f804f25232ac 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -77,6 +77,10 @@ config PPC_PSERIES bool " IBM pSeries & new iSeries" default y +config PPC_BPA + bool " Broadband Processor Architecture" + depends on PPC_MULTIPLATFORM + config PPC_PMAC depends on PPC_MULTIPLATFORM bool " Apple G5 based machines" @@ -106,6 +110,21 @@ config PPC_OF bool default y +config XICS + depends on PPC_PSERIES + bool + default y + +config MPIC + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE + bool + default y + +config BPA_IIC + depends on PPC_BPA + bool + default y + # VMX is pSeries only for now until somebody writes the iSeries # exception vectors for it config ALTIVEC @@ -123,6 +142,23 @@ config PPC_SPLPAR processors, that is, which share physical processors between two or more partitions. +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on PPC_MULTIPLATFORM && EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + config IBMVIO depends on PPC_PSERIES || PPC_ISERIES bool @@ -198,13 +234,49 @@ config HMT This option enables hardware multithreading on RS64 cpus. pSeries systems p620 and p660 have such a cpu type. -config DISCONTIGMEM - bool "Discontiguous Memory Support" +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on !NUMA + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y depends on SMP && PPC_PSERIES +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +config ARCH_FLATMEM_ENABLE + def_bool y + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +source "mm/Kconfig" + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + depends on NEED_MULTIPLE_NODES + +# Some NUMA nodes have memory ranges that span +# other nodes. Even though a pfn is valid and +# between a node's start and end pfns, it may not +# reside on that node. +# +# This is a relatively temporary hack that should +# be able to go away when sparsemem is fully in +# place +config NODES_SPAN_OTHER_NODES + def_bool y + depends on NEED_MULTIPLE_NODES + config NUMA bool "NUMA support" - depends on DISCONTIGMEM + default y if DISCONTIGMEM || SPARSEMEM config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -215,26 +287,7 @@ config SCHED_SMT when dealing with POWER5 cpus at a cost of slightly increased overhead in some places. If unsure say N here. -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. - -config PREEMPT_BKL - bool "Preempt The Big Kernel Lock" - depends on PREEMPT - default y - help - This option reduces the latency of the kernel by making the - big kernel lock preemptible. - - Say Y here if you are building a kernel for a desktop system. - Say N if you are unsure. +source "kernel/Kconfig.preempt" config EEH bool "PCI Extended Error Handling (EEH)" if EMBEDDED @@ -256,7 +309,7 @@ config MSCHUNKS config PPC_RTAS bool - depends on PPC_PSERIES + depends on PPC_PSERIES || PPC_BPA default y config RTAS_PROC @@ -323,7 +376,7 @@ config EISA bool config PCI - bool + bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES) default y help Find out whether your system includes a PCI bus. PCI is the name of diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 691f3008e698..731b84758331 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -35,9 +35,9 @@ CROSS32AS := $(AS) -a32 CROSS32LD := $(LD) -m elf32ppc CROSS32OBJCOPY := $(OBJCOPY) endif -AS := $(AS) -a64 -LD := $(LD) -m elf64ppc -CC := $(CC) -m64 +override AS += -a64 +override LD += -m elf64ppc +override CC += -m64 endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY @@ -90,12 +90,14 @@ boot := arch/ppc64/boot boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm +boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd $(boottarget-y): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage bootimage-$(CONFIG_PPC_PMAC) := vmlinux bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage +bootimage-$(CONFIG_PPC_BPA) := zImage bootimage-$(CONFIG_PPC_ISERIES) := vmlinux BOOTIMAGE := $(bootimage-y) install: vmlinux diff --git a/arch/ppc64/boot/install.sh b/arch/ppc64/boot/install.sh index 955c5681db6c..cb2d6626b555 100644 --- a/arch/ppc64/boot/install.sh +++ b/arch/ppc64/boot/install.sh @@ -22,8 +22,8 @@ # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi # Default install diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index 7b607d1862cb..d5218b15824e 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -11,6 +11,23 @@ #include <linux/string.h> #include <linux/ctype.h> +extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + __u32 __base = (base); \ + __u32 __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (__u32)(n) % __base; \ + (n) = (__u32)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + int (*prom)(void *); void *chosen_handle; @@ -352,7 +369,7 @@ static int skip_atoi(const char **s) #define SPECIAL 32 /* 0x */ #define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ -static char * number(char * str, long num, int base, int size, int precision, int type) +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) { char c,sign,tmp[66]; const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; @@ -367,9 +384,9 @@ static char * number(char * str, long num, int base, int size, int precision, in c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { - if (num < 0) { + if ((signed long long)num < 0) { sign = '-'; - num = -num; + num = - (signed long long)num; size--; } else if (type & PLUS) { sign = '+'; @@ -389,8 +406,7 @@ static char * number(char * str, long num, int base, int size, int precision, in if (num == 0) tmp[i++]='0'; else while (num != 0) { - tmp[i++] = digits[num % base]; - num /= base; + tmp[i++] = digits[do_div(num, base)]; } if (i > precision) precision = i; @@ -426,7 +442,7 @@ int sprintf(char * buf, const char *fmt, ...); int vsprintf(char *buf, const char *fmt, va_list args) { int len; - unsigned long num; + unsigned long long num; int i, base; char * str; const char *s; diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 0f90df0b3f9c..1eb33398648e 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Thu Mar 10 16:47:04 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 16:59:20 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # CONFIG_HOTPLUG_CPU is not set # @@ -105,10 +110,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -394,7 +395,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -564,6 +564,8 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -631,18 +633,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -660,6 +650,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -830,6 +840,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set @@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y @@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_TI=m @@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index a39e9d2e25da..f6a2b99afd63 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:52 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:01:28 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -89,6 +97,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -96,10 +105,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -280,7 +285,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -445,7 +449,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -471,6 +474,7 @@ CONFIG_E1000=m # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -539,14 +543,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -556,6 +552,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_SERIAL_NONSTANDARD is not set @@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -848,10 +854,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index cf527501915c..8051b0f47b6f 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:53 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:12:48 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -94,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -101,10 +109,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -261,7 +265,6 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -376,6 +379,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -432,14 +437,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -449,6 +446,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set @@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 4fecf237d5c9..d0db8b5966c0 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:54 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:13:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -82,16 +88,19 @@ CONFIG_IBMVIO=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=128 -CONFIG_DISCONTIGMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_NUMA=y CONFIG_SCHED_SMT=y # CONFIG_PREEMPT is not set CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -110,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -371,7 +377,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -539,7 +544,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -565,6 +569,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -636,20 +642,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -669,6 +661,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,9 +722,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -838,6 +859,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 537b1cc82eab..b8e2066dde77 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:51 2005 +# Linux kernel version: 2.6.12-rc5-git9 +# Sun Jun 5 09:26:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,16 +89,19 @@ CONFIG_BOOTX_TEXT=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=32 -CONFIG_DISCONTIGMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y # CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -112,10 +121,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set @@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB=y CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y # CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set # CONFIG_INPUT_ADBHID is not set @@ -420,7 +427,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -588,7 +594,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -614,6 +619,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -683,20 +690,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -716,6 +709,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -766,9 +772,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -890,9 +913,8 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/kernel/HvLpEvent.c b/arch/ppc64/kernel/HvLpEvent.c index f8f19637f73f..90032b138902 100644 --- a/arch/ppc64/kernel/HvLpEvent.c +++ b/arch/ppc64/kernel/HvLpEvent.c @@ -12,7 +12,7 @@ #include <asm/system.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/LparData.h> +#include <asm/iSeries/ItLpNaca.h> /* Array of LpEvent handler functions */ LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes]; diff --git a/arch/ppc64/kernel/ItLpQueue.c b/arch/ppc64/kernel/ItLpQueue.c index c923a815760e..cdea00d7707f 100644 --- a/arch/ppc64/kernel/ItLpQueue.c +++ b/arch/ppc64/kernel/ItLpQueue.c @@ -16,7 +16,6 @@ #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/LparData.h> static __inline__ int set_inUse( struct ItLpQueue * lpQueue ) { diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 96d90b0c5119..d9b2660ef221 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -16,29 +16,33 @@ obj-y += vdso32/ vdso64/ obj-$(CONFIG_PPC_OF) += of_device.o -pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_pci.o iSeries_pci_reset.o +pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_pci.o iSeries_irq.o \ + iSeries_VpdInfo.o pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y) -obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \ - iSeries_VpdInfo.o XmPciLpEvent.o \ - HvCall.o HvLpConfig.o LparData.o \ +obj-$(CONFIG_PPC_ISERIES) += HvCall.o HvLpConfig.o LparData.o \ iSeries_setup.o ItLpQueue.o hvCall.o \ mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \ iSeries_iommu.o -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o mpic.o +obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ - xics.o rtas.o pSeries_setup.o pSeries_iommu.o + pSeries_setup.o pSeries_iommu.o +obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ + bpa_iic.o spider-pic.o + +obj-$(CONFIG_KEXEC) += machine_kexec.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_VIOPATH) += viopath.o @@ -47,6 +51,8 @@ obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_XICS) += xics.o +obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \ pmac_time.o pmac_nvram.o pmac_low_i2c.o @@ -59,6 +65,7 @@ ifdef CONFIG_SMP obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o obj-$(CONFIG_PPC_ISERIES) += iSeries_smp.o obj-$(CONFIG_PPC_PSERIES) += pSeries_smp.o +obj-$(CONFIG_PPC_BPA) += pSeries_smp.o obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o endif diff --git a/arch/ppc64/kernel/XmPciLpEvent.c b/arch/ppc64/kernel/XmPciLpEvent.c deleted file mode 100644 index 809c9bc6678b..000000000000 --- a/arch/ppc64/kernel/XmPciLpEvent.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * File XmPciLpEvent.h created by Wayne Holm on Mon Jan 15 2001. - * - * This module handles PCI interrupt events sent by the iSeries Hypervisor. -*/ - -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/smp.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/ide.h> - -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallPci.h> -#include <asm/iSeries/XmPciLpEvent.h> -#include <asm/ppcdebug.h> - -static long Pci_Interrupt_Count; -static long Pci_Event_Count; - -enum XmPciLpEvent_Subtype { - XmPciLpEvent_BusCreated = 0, // PHB has been created - XmPciLpEvent_BusError = 1, // PHB has failed - XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus - XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed - XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered - XmPciLpEvent_BusRecovered = 12, // PHB has been recovered - XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing - XmPciLpEvent_BridgeError = 21, // Bridge Error - XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt -}; - -struct XmPciLpEvent_BusInterrupt { - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; -}; - -struct XmPciLpEvent_NodeInterrupt { - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; - HvAgentId deviceId; -}; - -struct XmPciLpEvent { - struct HvLpEvent hvLpEvent; - - union { - u64 alignData; // Align on an 8-byte boundary - - struct { - u32 fisr; - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; - HvAgentId deviceId; - } slotInterrupt; - - struct XmPciLpEvent_BusInterrupt busFailed; - struct XmPciLpEvent_BusInterrupt busRecovered; - struct XmPciLpEvent_BusInterrupt busCreated; - - struct XmPciLpEvent_NodeInterrupt nodeFailed; - struct XmPciLpEvent_NodeInterrupt nodeRecovered; - - } eventData; - -}; - -static void intReceived(struct XmPciLpEvent *eventParm, - struct pt_regs *regsParm); - -static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, - struct pt_regs *regsParm) -{ -#ifdef CONFIG_PCI -#if 0 - PPCDBG(PPCDBG_BUSWALK, "XmPciLpEvent_handler, type 0x%x\n", - eventParm->xType); -#endif - ++Pci_Event_Count; - - if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { - switch (eventParm->xFlags.xFunction) { - case HvLpEvent_Function_Int: - intReceived((struct XmPciLpEvent *)eventParm, regsParm); - break; - case HvLpEvent_Function_Ack: - printk(KERN_ERR - "XmPciLpEvent.c: unexpected ack received\n"); - break; - default: - printk(KERN_ERR - "XmPciLpEvent.c: unexpected event function %d\n", - (int)eventParm->xFlags.xFunction); - break; - } - } else if (eventParm) - printk(KERN_ERR - "XmPciLpEvent.c: Unrecognized PCI event type 0x%x\n", - (int)eventParm->xType); - else - printk(KERN_ERR "XmPciLpEvent.c: NULL event received\n"); -#endif -} - -static void intReceived(struct XmPciLpEvent *eventParm, - struct pt_regs *regsParm) -{ - int irq; - - ++Pci_Interrupt_Count; -#if 0 - PPCDBG(PPCDBG_BUSWALK, "PCI: XmPciLpEvent.c: intReceived\n"); -#endif - - switch (eventParm->hvLpEvent.xSubtype) { - case XmPciLpEvent_SlotInterrupt: - irq = eventParm->hvLpEvent.xCorrelationToken; - /* Dispatch the interrupt handlers for this irq */ - ppc_irq_dispatch_handler(regsParm, irq); - HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, - eventParm->eventData.slotInterrupt.subBusNumber, - eventParm->eventData.slotInterrupt.deviceId); - break; - /* Ignore error recovery events for now */ - case XmPciLpEvent_BusCreated: - printk(KERN_INFO "XmPciLpEvent.c: system bus %d created\n", - eventParm->eventData.busCreated.busNumber); - break; - case XmPciLpEvent_BusError: - case XmPciLpEvent_BusFailed: - printk(KERN_INFO "XmPciLpEvent.c: system bus %d failed\n", - eventParm->eventData.busFailed.busNumber); - break; - case XmPciLpEvent_BusRecovered: - case XmPciLpEvent_UnQuiesceBus: - printk(KERN_INFO "XmPciLpEvent.c: system bus %d recovered\n", - eventParm->eventData.busRecovered.busNumber); - break; - case XmPciLpEvent_NodeFailed: - case XmPciLpEvent_BridgeError: - printk(KERN_INFO - "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d failed\n", - eventParm->eventData.nodeFailed.busNumber, - eventParm->eventData.nodeFailed.subBusNumber, - eventParm->eventData.nodeFailed.deviceId); - break; - case XmPciLpEvent_NodeRecovered: - printk(KERN_INFO - "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d recovered\n", - eventParm->eventData.nodeRecovered.busNumber, - eventParm->eventData.nodeRecovered.subBusNumber, - eventParm->eventData.nodeRecovered.deviceId); - break; - default: - printk(KERN_ERR - "XmPciLpEvent.c: unrecognized event subtype 0x%x\n", - eventParm->hvLpEvent.xSubtype); - break; - } -} - - -/* This should be called sometime prior to buswalk (init_IRQ would be good) */ -int XmPciLpEvent_init() -{ - int xRc; - - PPCDBG(PPCDBG_BUSWALK, - "XmPciLpEvent_init, Register Event type 0x%04X\n", - HvLpEvent_Type_PciIo); - - xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, - &XmPciLpEvent_handler); - if (xRc == 0) { - xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); - if (xRc != 0) - printk(KERN_ERR - "XmPciLpEvent.c: open event path failed with rc 0x%x\n", - xRc); - } else - printk(KERN_ERR - "XmPciLpEvent.c: register handler failed with rc 0x%x\n", - xRc); - return xRc; -} diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index 0094ac79a18c..abb9e5b5da03 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -31,7 +31,6 @@ #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/rtas.h> #include <asm/cputable.h> diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/ppc64/kernel/bpa_iic.c new file mode 100644 index 000000000000..c8f3dc3fad70 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iic.c @@ -0,0 +1,270 @@ +/* + * BPA Internal Interrupt Controller + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/types.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/ptrace.h> + +#include "bpa_iic.h" + +struct iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +enum iic_pending_flags { + IIC_VALID = 0x80, + IIC_IPI = 0x40, +}; + +struct iic_regs { + struct iic_pending_bits pending; + struct iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct iic { + struct iic_regs __iomem *regs; +}; + +static DEFINE_PER_CPU(struct iic, iic); + +void iic_local_enable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_local_disable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0x0); +} + +static unsigned int iic_startup(unsigned int irq) +{ + return 0; +} + +static void iic_enable(unsigned int irq) +{ + iic_local_enable(); +} + +static void iic_disable(unsigned int irq) +{ +} + +static void iic_end(unsigned int irq) +{ + iic_local_enable(); +} + +static struct hw_interrupt_type iic_pic = { + .typename = " BPA-IIC ", + .startup = iic_startup, + .enable = iic_enable, + .disable = iic_disable, + .end = iic_end, +}; + +static int iic_external_get_irq(struct iic_pending_bits pending) +{ + int irq; + unsigned char node, unit; + + node = pending.source >> 4; + unit = pending.source & 0xf; + irq = -1; + + /* + * This mapping is specific to the Broadband + * Engine. We might need to get the numbers + * from the device tree to support future CPUs. + */ + switch (unit) { + case 0x00: + case 0x0b: + /* + * One of these units can be connected + * to an external interrupt controller. + */ + if (pending.prio > 0x3f || + pending.class != 2) + break; + irq = IIC_EXT_OFFSET + + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE) + + node * IIC_NODE_STRIDE; + break; + case 0x01 ... 0x04: + case 0x07 ... 0x0a: + /* + * These units are connected to the SPEs + */ + if (pending.class > 2) + break; + irq = IIC_SPE_OFFSET + + pending.class * IIC_CLASS_STRIDE + + node * IIC_NODE_STRIDE + + unit; + break; + } + if (irq == -1) + printk(KERN_WARNING "Unexpected interrupt class %02x, " + "source %02x, prio %02x, cpu %02x\n", pending.class, + pending.source, pending.prio, smp_processor_id()); + return irq; +} + +/* Get an IRQ number from the pending state register of the IIC */ +int iic_get_irq(struct pt_regs *regs) +{ + struct iic *iic; + int irq; + struct iic_pending_bits pending; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + + irq = -1; + if (pending.flags & IIC_VALID) { + if (pending.flags & IIC_IPI) { + irq = IIC_IPI_OFFSET + (pending.prio >> 4); +/* + if (irq > 0x80) + printk(KERN_WARNING "Unexpected IPI prio %02x" + "on CPU %02x\n", pending.prio, + smp_processor_id()); +*/ + } else { + irq = iic_external_get_irq(pending); + } + } + return irq; +} + +static struct iic_regs __iomem *find_iic(int cpu) +{ + struct device_node *np; + int nodeid = cpu / 2; + unsigned long regs; + struct iic_regs __iomem *iic_regs; + + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + if (nodeid == *(int *)get_property(np, "node-id", NULL)) + break; + } + + if (!np) { + printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); + iic_regs = NULL; + } else { + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); + iic_regs = __ioremap(regs, sizeof(struct iic_regs), + _PAGE_NO_CACHE); + } + return iic_regs; +} + +#ifdef CONFIG_SMP +void iic_setup_cpu(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_cause_IPI(int cpu, int mesg) +{ + out_be64(&per_cpu(iic, cpu).regs->generate, mesg); +} + +static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) +{ + + smp_message_recv(irq - IIC_IPI_OFFSET, regs); + return IRQ_HANDLED; +} + +static void iic_request_ipi(int irq, const char *name) +{ + /* IPIs are marked SA_INTERRUPT as they must run with irqs + * disabled */ + get_irq_desc(irq)->handler = &iic_pic; + get_irq_desc(irq)->status |= IRQ_PER_CPU; + request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL); +} + +void iic_request_IPIs(void) +{ + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call"); + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched"); +#ifdef CONFIG_DEBUGGER + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); +#endif /* CONFIG_DEBUGGER */ +} +#endif /* CONFIG_SMP */ + +static void iic_setup_spe_handlers(void) +{ + int be, isrc; + + /* Assume two threads per BE are present */ + for (be=0; be < num_present_cpus() / 2; be++) { + for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { + int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; + get_irq_desc(irq)->handler = &iic_pic; + } + } +} + +void iic_init_IRQ(void) +{ + int cpu, irq_offset; + struct iic *iic; + + irq_offset = 0; + for_each_cpu(cpu) { + iic = &per_cpu(iic, cpu); + iic->regs = find_iic(cpu); + if (iic->regs) + out_be64(&iic->regs->prio, 0xff); + } + iic_setup_spe_handlers(); +} diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/ppc64/kernel/bpa_iic.h new file mode 100644 index 000000000000..6833c3022166 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iic.h @@ -0,0 +1,62 @@ +#ifndef ASM_BPA_IIC_H +#define ASM_BPA_IIC_H +#ifdef __KERNEL__ +/* + * Mapping of IIC pending bits into per-node + * interrupt numbers. + * + * IRQ FF CC SS PP FF CC SS PP Description + * + * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge + * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge + * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0 + * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1 + * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2 + * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI + * + * F flags + * C class + * S source + * P Priority + * + node number + * * don't care + * + * A node consists of a Broadband Engine and an optional + * south bridge device providing a maximum of 64 IRQs. + * The south bridge may be connected to either IOIF0 + * or IOIF1. + * Each SPE is represented as three IRQ lines, one per + * interrupt class. + * 16 IRQ numbers are reserved for inter processor + * interruptions, although these are only used in the + * range of the first node. + * + * This scheme needs 128 IRQ numbers per BIF node ID, + * which means that with the total of 512 lines + * available, we can have a maximum of four nodes. + */ + +enum { + IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */ + IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */ + IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */ + IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */ + IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */ + IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ + IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */ +}; + +extern void iic_init_IRQ(void); +extern int iic_get_irq(struct pt_regs *regs); +extern void iic_cause_IPI(int cpu, int mesg); +extern void iic_request_IPIs(void); +extern void iic_setup_cpu(void); +extern void iic_local_enable(void); +extern void iic_local_disable(void); + + +extern void spider_init_IRQ(void); +extern int spider_get_irq(unsigned long int_pending); + +#endif +#endif /* ASM_BPA_IIC_H */ diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/ppc64/kernel/bpa_iommu.c new file mode 100644 index 000000000000..f33a7bccb0d7 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iommu.c @@ -0,0 +1,377 @@ +/* + * IOMMU implementation for Broadband Processor Architecture + * We just establish a linear mapping at boot by setting all the + * IOPT cache entries in the CPU. + * The mapping functions should be identical to pci_direct_iommu, + * except for the handling of the high order bit that is required + * by the Spider bridge. These should be split into a separate + * file at the point where we get a different bridge chip. + * + * Copyright (C) 2005 IBM Deutschland Entwicklung GmbH, + * Arnd Bergmann <arndb@de.ibm.com> + * + * Based on linear mapping + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> + +#include <asm/sections.h> +#include <asm/iommu.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/abs_addr.h> +#include <asm/system.h> + +#include "pci.h" +#include "bpa_iommu.h" + +static inline unsigned long +get_iopt_entry(unsigned long real_address, unsigned long ioid, + unsigned long prot) +{ + return (prot & IOPT_PROT_MASK) + | (IOPT_COHERENT) + | (IOPT_ORDER_VC) + | (real_address & IOPT_RPN_MASK) + | (ioid & IOPT_IOID_MASK); +} + +typedef struct { + unsigned long val; +} ioste; + +static inline ioste +mk_ioste(unsigned long val) +{ + ioste ioste = { .val = val, }; + return ioste; +} + +static inline ioste +get_iost_entry(unsigned long iopt_base, unsigned long io_address, unsigned page_size) +{ + unsigned long ps; + unsigned long iostep; + unsigned long nnpt; + unsigned long shift; + + switch (page_size) { + case 0x1000000: + ps = IOST_PS_16M; + nnpt = 0; /* one page per segment */ + shift = 5; /* segment has 16 iopt entries */ + break; + + case 0x100000: + ps = IOST_PS_1M; + nnpt = 0; /* one page per segment */ + shift = 1; /* segment has 256 iopt entries */ + break; + + case 0x10000: + ps = IOST_PS_64K; + nnpt = 0x07; /* 8 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + case 0x1000: + ps = IOST_PS_4K; + nnpt = 0x7f; /* 128 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + default: /* not a known compile time constant */ + BUILD_BUG_ON(1); + break; + } + + iostep = iopt_base + + /* need 8 bytes per iopte */ + (((io_address / page_size * 8) + /* align io page tables on 4k page boundaries */ + << shift) + /* nnpt+1 pages go into each iopt */ + & ~(nnpt << 12)); + + nnpt++; /* this seems to work, but the documentation is not clear + about wether we put nnpt or nnpt-1 into the ioste bits. + In theory, this can't work for 4k pages. */ + return mk_ioste(IOST_VALID_MASK + | (iostep & IOST_PT_BASE_MASK) + | ((nnpt << 5) & IOST_NNPT_MASK) + | (ps & IOST_PS_MASK)); +} + +/* compute the address of an io pte */ +static inline unsigned long +get_ioptep(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopt_base; + unsigned long page_size; + unsigned long page_number; + unsigned long iopt_offset; + + iopt_base = iost_entry.val & IOST_PT_BASE_MASK; + page_size = iost_entry.val & IOST_PS_MASK; + + /* decode page size to compute page number */ + page_number = (io_address & 0x0fffffff) >> (10 + 2 * page_size); + /* page number is an offset into the io page table */ + iopt_offset = (page_number << 3) & 0x7fff8ul; + return iopt_base + iopt_offset; +} + +/* compute the tag field of the iopt cache entry */ +static inline unsigned long +get_ioc_tag(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return IOPT_VALID_MASK + | ((iopte & 0x00000000000000ff8ul) >> 3) + | ((iopte & 0x0000003fffffc0000ul) >> 9); +} + +/* compute the hashed 6 bit index for the 4-way associative pte cache */ +static inline unsigned long +get_ioc_hash(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7); +} + +/* same as above, but pretend that we have a simpler 1-way associative + pte cache with an 8 bit index */ +static inline unsigned long +get_ioc_hash_1way(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7) + ^ ((iopte & 0x0000000000000c000ul) >> 8); +} + +static inline ioste +get_iost_cache(void __iomem *base, unsigned long index) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + return mk_ioste(in_be64(&p[index])); +} + +static inline void +set_iost_cache(void __iomem *base, unsigned long index, ioste ste) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + pr_debug("ioste %02lx was %016lx, store %016lx", index, + get_iost_cache(base, index).val, ste.val); + out_be64(&p[index], ste.val); + pr_debug(" now %016lx\n", get_iost_cache(base, index).val); +} + +static inline unsigned long +get_iopt_cache(void __iomem *base, unsigned long index, unsigned long *tag) +{ + unsigned long __iomem *tags = (void *)(base + IOC_PT_CACHE_DIR); + unsigned long __iomem *p = (void *)(base + IOC_PT_CACHE_REG); + + *tag = tags[index]; + rmb(); + return *p; +} + +static inline void +set_iopt_cache(void __iomem *base, unsigned long index, + unsigned long tag, unsigned long val) +{ + unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR; + unsigned long __iomem *p = base + IOC_PT_CACHE_REG; + pr_debug("iopt %02lx was v%016lx/t%016lx, store v%016lx/t%016lx\n", + index, get_iopt_cache(base, index, &oldtag), oldtag, val, tag); + + out_be64(p, val); + out_be64(&tags[index], tag); +} + +static inline void +set_iost_origin(void __iomem *base) +{ + unsigned long __iomem *p = base + IOC_ST_ORIGIN; + unsigned long origin = IOSTO_ENABLE | IOSTO_SW; + + pr_debug("iost_origin %016lx, now %016lx\n", in_be64(p), origin); + out_be64(p, origin); +} + +static inline void +set_iocmd_config(void __iomem *base) +{ + unsigned long __iomem *p = base + 0xc00; + unsigned long conf; + + conf = in_be64(p); + pr_debug("iost_conf %016lx, now %016lx\n", conf, conf | IOCMD_CONF_TE); + out_be64(p, conf | IOCMD_CONF_TE); +} + +/* FIXME: get these from the device tree */ +#define ioc_base 0x20000511000ull +#define ioc_mmio_base 0x20000510000ull +#define ioid 0x48a +#define iopt_phys_offset (- 0x20000000) /* We have a 512MB offset from the SB */ +#define io_page_size 0x1000000 + +static unsigned long map_iopt_entry(unsigned long address) +{ + switch (address >> 20) { + case 0x600: + address = 0x24020000000ull; /* spider i/o */ + break; + default: + address += iopt_phys_offset; + break; + } + + return get_iopt_entry(address, ioid, IOPT_PROT_RW); +} + +static void iommu_bus_setup_null(struct pci_bus *b) { } +static void iommu_dev_setup_null(struct pci_dev *d) { } + +/* initialize the iommu to support a simple linear mapping + * for each DMA window used by any device. For now, we + * happen to know that there is only one DMA window in use, + * starting at iopt_phys_offset. */ +static void bpa_map_iommu(void) +{ + unsigned long address; + void __iomem *base; + ioste ioste; + unsigned long index; + + base = __ioremap(ioc_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_base, base); + set_iocmd_config(base); + iounmap(base); + + base = __ioremap(ioc_mmio_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_mmio_base, base); + + set_iost_origin(base); + + for (address = 0; address < 0x100000000ul; address += io_page_size) { + ioste = get_iost_entry(0x10000000000ul, address, io_page_size); + if ((address & 0xfffffff) == 0) /* segment start */ + set_iost_cache(base, address >> 28, ioste); + index = get_ioc_hash_1way(ioste, address); + pr_debug("addr %08lx, index %02lx, ioste %016lx\n", + address, index, ioste.val); + set_iopt_cache(base, + get_ioc_hash_1way(ioste, address), + get_ioc_tag(ioste, address), + map_iopt_entry(address)); + } + iounmap(base); +} + + +static void *bpa_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, unsigned int __nocast flag) +{ + void *ret; + + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret) | BPA_DMA_VALID; + } + return ret; +} + +static void bpa_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} + +static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr, + size_t size, enum dma_data_direction direction) +{ + return virt_to_abs(ptr) | BPA_DMA_VALID; +} + +static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = (page_to_phys(sg->page) + sg->offset) + | BPA_DMA_VALID; + sg->dma_length = sg->length; + } + + return nents; +} + +static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +} + +static int bpa_dma_supported(struct device *dev, u64 mask) +{ + return mask < 0x100000000ull; +} + +void bpa_init_iommu(void) +{ + bpa_map_iommu(); + + /* Direct I/O, IOMMU off */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + + pci_dma_ops.alloc_coherent = bpa_alloc_coherent; + pci_dma_ops.free_coherent = bpa_free_coherent; + pci_dma_ops.map_single = bpa_map_single; + pci_dma_ops.unmap_single = bpa_unmap_single; + pci_dma_ops.map_sg = bpa_map_sg; + pci_dma_ops.unmap_sg = bpa_unmap_sg; + pci_dma_ops.dma_supported = bpa_dma_supported; +} diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/ppc64/kernel/bpa_iommu.h new file mode 100644 index 000000000000..e547d77dfa04 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iommu.h @@ -0,0 +1,65 @@ +#ifndef BPA_IOMMU_H +#define BPA_IOMMU_H + +/* some constants */ +enum { + /* segment table entries */ + IOST_VALID_MASK = 0x8000000000000000ul, + IOST_TAG_MASK = 0x3000000000000000ul, + IOST_PT_BASE_MASK = 0x000003fffffff000ul, + IOST_NNPT_MASK = 0x0000000000000fe0ul, + IOST_PS_MASK = 0x000000000000000ful, + + IOST_PS_4K = 0x1, + IOST_PS_64K = 0x3, + IOST_PS_1M = 0x5, + IOST_PS_16M = 0x7, + + /* iopt tag register */ + IOPT_VALID_MASK = 0x0000000200000000ul, + IOPT_TAG_MASK = 0x00000001fffffffful, + + /* iopt cache register */ + IOPT_PROT_MASK = 0xc000000000000000ul, + IOPT_PROT_NONE = 0x0000000000000000ul, + IOPT_PROT_READ = 0x4000000000000000ul, + IOPT_PROT_WRITE = 0x8000000000000000ul, + IOPT_PROT_RW = 0xc000000000000000ul, + IOPT_COHERENT = 0x2000000000000000ul, + + IOPT_ORDER_MASK = 0x1800000000000000ul, + /* order access to same IOID/VC on same address */ + IOPT_ORDER_ADDR = 0x0800000000000000ul, + /* similar, but only after a write access */ + IOPT_ORDER_WRITES = 0x1000000000000000ul, + /* Order all accesses to same IOID/VC */ + IOPT_ORDER_VC = 0x1800000000000000ul, + + IOPT_RPN_MASK = 0x000003fffffff000ul, + IOPT_HINT_MASK = 0x0000000000000800ul, + IOPT_IOID_MASK = 0x00000000000007fful, + + IOSTO_ENABLE = 0x8000000000000000ul, + IOSTO_ORIGIN = 0x000003fffffff000ul, + IOSTO_HW = 0x0000000000000800ul, + IOSTO_SW = 0x0000000000000400ul, + + IOCMD_CONF_TE = 0x0000800000000000ul, + + /* memory mapped registers */ + IOC_PT_CACHE_DIR = 0x000, + IOC_ST_CACHE_DIR = 0x800, + IOC_PT_CACHE_REG = 0x910, + IOC_ST_ORIGIN = 0x918, + IOC_CONF = 0x930, + + /* The high bit needs to be set on every DMA address, + only 2GB are addressable */ + BPA_DMA_VALID = 0x80000000, + BPA_DMA_MASK = 0x7fffffff, +}; + + +void bpa_init_iommu(void); + +#endif diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/ppc64/kernel/bpa_nvram.c new file mode 100644 index 000000000000..06a119cfceb5 --- /dev/null +++ b/arch/ppc64/kernel/bpa_nvram.c @@ -0,0 +1,118 @@ +/* + * NVRAM for CPBW + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/machdep.h> +#include <asm/nvram.h> +#include <asm/prom.h> + +static void __iomem *bpa_nvram_start; +static long bpa_nvram_len; +static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED; + +static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= bpa_nvram_len) + return 0; + if (*index + count > bpa_nvram_len) + count = bpa_nvram_len - *index; + + spin_lock_irqsave(&bpa_nvram_lock, flags); + + memcpy_fromio(buf, bpa_nvram_start + *index, count); + + spin_unlock_irqrestore(&bpa_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= bpa_nvram_len) + return 0; + if (*index + count > bpa_nvram_len) + count = bpa_nvram_len - *index; + + spin_lock_irqsave(&bpa_nvram_lock, flags); + + memcpy_toio(bpa_nvram_start + *index, buf, count); + + spin_unlock_irqrestore(&bpa_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t bpa_nvram_get_size(void) +{ + return bpa_nvram_len; +} + +int __init bpa_nvram_init(void) +{ + struct device_node *nvram_node; + unsigned long *buffer; + int proplen; + unsigned long nvram_addr; + int ret; + + ret = -ENODEV; + nvram_node = of_find_node_by_type(NULL, "nvram"); + if (!nvram_node) + goto out; + + ret = -EIO; + buffer = (unsigned long *)get_property(nvram_node, "reg", &proplen); + if (proplen != 2*sizeof(unsigned long)) + goto out; + + ret = -ENODEV; + nvram_addr = buffer[0]; + bpa_nvram_len = buffer[1]; + if ( (!bpa_nvram_len) || (!nvram_addr) ) + goto out; + + bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len); + if (!bpa_nvram_start) + goto out; + + printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n", + bpa_nvram_len >> 10, bpa_nvram_start); + + ppc_md.nvram_read = bpa_nvram_read; + ppc_md.nvram_write = bpa_nvram_write; + ppc_md.nvram_size = bpa_nvram_get_size; + +out: + of_node_put(nvram_node); + return ret; +} diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c new file mode 100644 index 000000000000..57b3db66f458 --- /dev/null +++ b/arch/ppc64/kernel/bpa_setup.c @@ -0,0 +1,140 @@ +/* + * linux/arch/ppc/kernel/bpa_setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#undef DEBUG + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/console.h> + +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/cputable.h> + +#include "pci.h" +#include "bpa_iic.h" +#include "bpa_iommu.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +void bpa_get_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: BPA %s\n", model); + of_node_put(root); +} + +static void bpa_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static void __init bpa_setup_arch(void) +{ + ppc_md.init_IRQ = iic_init_IRQ; + ppc_md.get_irq = iic_get_irq; + +#ifdef CONFIG_SMP + smp_init_pSeries(); +#endif + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/hda2\n"); + ROOT_DEV = Root_HDA2; + } + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + spider_init_IRQ(); +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + bpa_nvram_init(); +} + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init bpa_init_early(void) +{ + DBG(" -> bpa_init_early()\n"); + + hpte_init_native(); + + bpa_init_iommu(); + + ppc64_interrupt_controller = IC_BPA_IIC; + + DBG(" <- bpa_init_early()\n"); +} + + +static int __init bpa_probe(int platform) +{ + if (platform != PLATFORM_BPA) + return 0; + + return 1; +} + +struct machdep_calls __initdata bpa_md = { + .probe = bpa_probe, + .setup_arch = bpa_setup_arch, + .init_early = bpa_init_early, + .get_cpuinfo = bpa_get_cpuinfo, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = bpa_progress, +}; diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S index 3bd951820850..42fc08cf87a0 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/ppc64/kernel/cpu_setup_power4.S @@ -73,7 +73,21 @@ _GLOBAL(__970_cpu_preinit) _GLOBAL(__setup_cpu_power4) blr - + +_GLOBAL(__setup_cpu_be) + /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ + addi r3, 0, 0 + ori r3, r3, HID6_LB + sldi r3, r3, 32 + nor r3, r3, r3 + mfspr r4, SPRN_HID6 + and r4, r4, r3 + addi r3, 0, 0x02000 + sldi r3, r3, 32 + or r4, r4, r3 + mtspr SPRN_HID6, r4 + blr + _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c index 8644a8648058..1d162c7c59df 100644 --- a/arch/ppc64/kernel/cputable.c +++ b/arch/ppc64/kernel/cputable.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(cur_cpu_spec); extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec); /* We only set the altivec features if the kernel was compiled with altivec @@ -162,6 +163,16 @@ struct cpu_spec cpu_specs[] = { __setup_cpu_power4, COMMON_PPC64_FW }, + { /* BE DD1.x */ + 0xffff0000, 0x00700000, "Broadband Engine", + CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_SMT, + COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, + 128, 128, + __setup_cpu_be, + COMMON_PPC64_FW + }, { /* default match */ 0x00000000, 0x00000000, "POWER4 (compatible)", CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | diff --git a/arch/ppc64/kernel/dma.c b/arch/ppc64/kernel/dma.c index ce714c927134..4da8e31b2b61 100644 --- a/arch/ppc64/kernel/dma.c +++ b/arch/ppc64/kernel/dma.c @@ -15,8 +15,10 @@ static struct dma_mapping_ops *get_dma_ops(struct device *dev) { +#ifdef CONFIG_PCI if (dev->bus == &pci_bus_type) return &pci_dma_ops; +#endif #ifdef CONFIG_IBMVIO if (dev->bus == &vio_bus_type) return &vio_dma_ops; @@ -37,8 +39,10 @@ EXPORT_SYMBOL(dma_supported); int dma_set_mask(struct device *dev, u64 dma_mask) { +#ifdef CONFIG_PCI if (dev->bus == &pci_bus_type) return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +#endif #ifdef CONFIG_IBMVIO if (dev->bus == &vio_bus_type) return -EIO; diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index d63d41f3eecf..af5272fedadf 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -505,7 +505,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) pte_t *ptep; unsigned long pa; - ptep = find_linux_pte(ioremap_mm.pgd, token); + ptep = find_linux_pte(init_mm.pgd, token); if (!ptep) return token; pa = pte_pfn(*ptep) << PAGE_SHIFT; diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S index d3604056e1a9..b61572eb2a71 100644 --- a/arch/ppc64/kernel/entry.S +++ b/arch/ppc64/kernel/entry.S @@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) REST_8GPRS(14, r1) REST_10GPRS(22, r1) -#ifdef CONFIG_PPC_ISERIES - clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */ - ld r7,TI_FLAGS(r7) /* Get run light flag */ - mfspr r9,CTRLF - srdi r7,r7,TIF_RUN_LIGHT - insrdi r9,r7,1,63 /* Insert run light into CTRL */ - mtspr CTRLT,r9 -#endif - /* convert old thread to its task_struct for return value */ addi r3,r3,-THREAD ld r7,_NIP(r1) /* Return to _switch caller in new task */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 92a744c31ab1..675c2708588f 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -626,10 +626,10 @@ system_reset_iSeries: lhz r24,PACAPACAINDEX(r13) /* Get processor # */ cmpwi 0,r24,0 /* Are we processor 0? */ beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,CTRLF - li r5,RUNLATCH /* Turn off the run light */ + mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ andc r4,r4,r5 - mtspr CTRLT,r4 + mtspr SPRN_CTRLT,r4 1: HMT_LOW @@ -1194,7 +1194,7 @@ _GLOBAL(pSeries_secondary_smp_init) bl .__restore_cpu_setup /* Set up a paca value for this processor. Since we have the - * physical cpu id in r3, we need to search the pacas to find + * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. */ LOADADDR(r13, paca) /* Get base vaddr of paca array */ @@ -1207,8 +1207,8 @@ _GLOBAL(pSeries_secondary_smp_init) cmpwi r5,NR_CPUS blt 1b -99: HMT_LOW /* Couldn't find our CPU id */ - b 99b + mr r3,r24 /* not found, copy phys to r3 */ + b .kexec_wait /* next kernel might do better */ 2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */ /* From now on, r24 is expected to be logica cpuid */ @@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary) mfspr r4, HID0 ori r4, r4, 0x1 mtspr HID0, r4 - mfspr r4, CTRLF + mfspr r4, SPRN_CTRLF oris r4, r4, 0x40 - mtspr CTRLT, r4 + mtspr SPRN_CTRLT, r4 blr #endif @@ -2121,10 +2121,6 @@ empty_zero_page: swapper_pg_dir: .space 4096 - .globl ioremap_dir -ioremap_dir: - .space 4096 - #ifdef CONFIG_SMP /* 1 page segment table per cpu (max 48, cpu0 allocated at STAB0_PHYS_ADDR) */ .globl stab_array diff --git a/arch/ppc64/kernel/iSeries_VpdInfo.c b/arch/ppc64/kernel/iSeries_VpdInfo.c index a6f0ff2d0239..d11c732daf81 100644 --- a/arch/ppc64/kernel/iSeries_VpdInfo.c +++ b/arch/ppc64/kernel/iSeries_VpdInfo.c @@ -1,31 +1,31 @@ -/************************************************************************/ -/* File iSeries_vpdInfo.c created by Allan Trautman on Fri Feb 2 2001. */ -/************************************************************************/ -/* This code gets the card location of the hardware */ -/* Copyright (C) 20yy <Allan H Trautman> <IBM Corp> */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will be useful, */ -/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ -/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ -/* GNU General Public License for more details. */ -/* */ -/* You should have received a copy of the GNU General Public License */ -/* along with this program; if not, write to the: */ -/* Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, */ -/* Boston, MA 02111-1307 USA */ -/************************************************************************/ -/* Change Activity: */ -/* Created, Feb 2, 2001 */ -/* Ported to ppc64, August 20, 2001 */ -/* End Change Activity */ -/************************************************************************/ -#include <linux/config.h> +/* + * File iSeries_vpdInfo.c created by Allan Trautman on Fri Feb 2 2001. + * + * This code gets the card location of the hardware + * Copyright (C) 2001 <Allan H Trautman> <IBM Corp> + * Copyright (C) 2005 Stephen Rothwel, IBM Corp + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, Feb 2, 2001 + * Ported to ppc64, August 20, 2001 + * End Change Activity + */ #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> @@ -34,30 +34,25 @@ #include <asm/iSeries/HvCallPci.h> #include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/iSeries_pci.h> -#include "pci.h" /* * Size of Bus VPD data */ #define BUS_VPDSIZE 1024 + /* * Bus Vpd Tags */ -#define VpdEndOfDataTag 0x78 #define VpdEndOfAreaTag 0x79 #define VpdIdStringTag 0x82 #define VpdVendorAreaTag 0x84 + /* * Mfg Area Tags */ -#define VpdFruFlag 0x4647 // "FG" #define VpdFruFrameId 0x4649 // "FI" #define VpdSlotMapFormat 0x4D46 // "MF" -#define VpdAsmPartNumber 0x504E // "PN" -#define VpdFruSerial 0x534E // "SN" #define VpdSlotMap 0x534D // "SM" /* @@ -79,74 +74,33 @@ struct SlotMapStruct { char CardLocation[3]; char Parms[8]; char Reserved[2]; -}; +}; typedef struct SlotMapStruct SlotMap; #define SLOT_ENTRY_SIZE 16 /* - * Formats the device information. - * - Pass in pci_dev* pointer to the device. - * - Pass in buffer to place the data. Danger here is the buffer must - * be as big as the client says it is. Should be at least 128 bytes. - * Return will the length of the string data put in the buffer. - * Format: - * PCI: Bus 0, Device 26, Vendor 0x12AE Frame 1, Card C10 Ethernet - * controller - */ -int iSeries_Device_Information(struct pci_dev *PciDev, char *buffer, - int BufferSize) -{ - struct iSeries_Device_Node *DevNode = - (struct iSeries_Device_Node *)PciDev->sysdata; - int len; - - if (DevNode == NULL) - return sprintf(buffer, - "PCI: iSeries_Device_Information DevNode is NULL"); - - if (BufferSize < 128) - return 0; - - len = sprintf(buffer, "PCI: Bus%3d, Device%3d, Vendor %04X ", - ISERIES_BUS(DevNode), PCI_SLOT(PciDev->devfn), - PciDev->vendor); - len += sprintf(buffer + len, "Frame%3d, Card %4s ", - DevNode->FrameId, DevNode->CardLocation); -#ifdef CONFIG_PCI - if (pci_class_name(PciDev->class >> 8) == 0) - len += sprintf(buffer + len, "0x%04X ", - (int)(PciDev->class >> 8)); - else - len += sprintf(buffer + len, "%s", - pci_class_name(PciDev->class >> 8)); -#endif - return len; -} - -/* * Parse the Slot Area */ -void iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, - struct iSeries_Device_Node *DevNode) +static void __init iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, + HvAgentId agent, u8 *PhbId, char card[4]) { int SlotMapLen = MapLen; SlotMap *SlotMapPtr = MapPtr; /* - * Parse Slot label until we find the one requrested + * Parse Slot label until we find the one requested */ while (SlotMapLen > 0) { - if (SlotMapPtr->AgentId == DevNode->AgentId ) { + if (SlotMapPtr->AgentId == agent) { /* * If Phb wasn't found, grab the entry first one found. */ - if (DevNode->PhbId == 0xff) - DevNode->PhbId = SlotMapPtr->PhbId; + if (*PhbId == 0xff) + *PhbId = SlotMapPtr->PhbId; /* Found it, extract the data. */ - if (SlotMapPtr->PhbId == DevNode->PhbId ) { - memcpy(&DevNode->CardLocation, - &SlotMapPtr->CardLocation, 3); - DevNode->CardLocation[3] = 0; + if (SlotMapPtr->PhbId == *PhbId) { + memcpy(card, &SlotMapPtr->CardLocation, 3); + card[3] = 0; break; } } @@ -159,8 +113,9 @@ void iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, /* * Parse the Mfg Area */ -static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, - struct iSeries_Device_Node *DevNode) +static void __init iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, + HvAgentId agent, u8 *PhbId, + u8 *frame, char card[4]) { MfgArea *MfgAreaPtr = (MfgArea *)AreaData; int MfgAreaLen = AreaLen; @@ -171,7 +126,7 @@ static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, int MfgTagLen = MfgAreaPtr->TagLength; /* Frame ID (FI 4649020310 ) */ if (MfgAreaPtr->Tag == VpdFruFrameId) /* FI */ - DevNode->FrameId = MfgAreaPtr->AreaData1; + *frame = MfgAreaPtr->AreaData1; /* Slot Map Format (MF 4D46020004 ) */ else if (MfgAreaPtr->Tag == VpdSlotMapFormat) /* MF */ SlotMapFmt = (MfgAreaPtr->AreaData1 * 256) @@ -183,10 +138,11 @@ static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, if (SlotMapFmt == 0x1004) SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr + MFG_ENTRY_SIZE + 1); - else + else SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr + MFG_ENTRY_SIZE); - iSeries_Parse_SlotArea(SlotMapPtr, MfgTagLen, DevNode); + iSeries_Parse_SlotArea(SlotMapPtr, MfgTagLen, + agent, PhbId, card); } /* * Point to the next Mfg Area @@ -194,19 +150,19 @@ static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, */ MfgAreaPtr = (MfgArea *)((char *)MfgAreaPtr + MfgTagLen + MFG_ENTRY_SIZE); - MfgAreaLen -= (MfgTagLen + MFG_ENTRY_SIZE); - } + MfgAreaLen -= (MfgTagLen + MFG_ENTRY_SIZE); + } } /* * Look for "BUS".. Data is not Null terminated. * PHBID of 0xFF indicates PHB was not found in VPD Data. */ -static int iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) +static int __init iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) { u8 *PhbPtr = AreaPtr; int DataLen = AreaLength; - char PhbId = 0xFF; + char PhbId = 0xFF; while (DataLen > 0) { if ((*PhbPtr == 'B') && (*(PhbPtr + 1) == 'U') @@ -216,7 +172,7 @@ static int iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) ++PhbPtr; PhbId = (*PhbPtr & 0x0F); break; - } + } ++PhbPtr; --DataLen; } @@ -226,52 +182,90 @@ static int iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) /* * Parse out the VPD Areas */ -static void iSeries_Parse_Vpd(u8 *VpdData, int VpdDataLen, - struct iSeries_Device_Node *DevNode) +static void __init iSeries_Parse_Vpd(u8 *VpdData, int VpdDataLen, + HvAgentId agent, u8 *frame, char card[4]) { u8 *TagPtr = VpdData; int DataLen = VpdDataLen - 3; + u8 PhbId; while ((*TagPtr != VpdEndOfAreaTag) && (DataLen > 0)) { - int AreaLen = *(TagPtr + 1) + (*(TagPtr + 2) * 256); + int AreaLen = *(TagPtr + 1) + (*(TagPtr + 2) * 256); u8 *AreaData = TagPtr + 3; if (*TagPtr == VpdIdStringTag) - DevNode->PhbId = iSeries_Parse_PhbId(AreaData, AreaLen); + PhbId = iSeries_Parse_PhbId(AreaData, AreaLen); else if (*TagPtr == VpdVendorAreaTag) - iSeries_Parse_MfgArea(AreaData, AreaLen, DevNode); + iSeries_Parse_MfgArea(AreaData, AreaLen, + agent, &PhbId, frame, card); /* Point to next Area. */ TagPtr = AreaData + AreaLen; DataLen -= AreaLen; } -} +} -void iSeries_Get_Location_Code(struct iSeries_Device_Node *DevNode) +static void __init iSeries_Get_Location_Code(u16 bus, HvAgentId agent, + u8 *frame, char card[4]) { int BusVpdLen = 0; - u8 *BusVpdPtr = (u8 *)kmalloc(BUS_VPDSIZE, GFP_KERNEL); + u8 *BusVpdPtr = kmalloc(BUS_VPDSIZE, GFP_KERNEL); if (BusVpdPtr == NULL) { printk("PCI: Bus VPD Buffer allocation failure.\n"); return; } - BusVpdLen = HvCallPci_getBusVpd(ISERIES_BUS(DevNode), - ISERIES_HV_ADDR(BusVpdPtr), + BusVpdLen = HvCallPci_getBusVpd(bus, ISERIES_HV_ADDR(BusVpdPtr), BUS_VPDSIZE); if (BusVpdLen == 0) { - kfree(BusVpdPtr); printk("PCI: Bus VPD Buffer zero length.\n"); - return; + goto out_free; } /* printk("PCI: BusVpdPtr: %p, %d\n",BusVpdPtr, BusVpdLen); */ /* Make sure this is what I think it is */ if (*BusVpdPtr != VpdIdStringTag) { /* 0x82 */ printk("PCI: Bus VPD Buffer missing starting tag.\n"); - kfree(BusVpdPtr); - return; + goto out_free; } - iSeries_Parse_Vpd(BusVpdPtr,BusVpdLen, DevNode); - sprintf(DevNode->Location, "Frame%3d, Card %-4s", DevNode->FrameId, - DevNode->CardLocation); + iSeries_Parse_Vpd(BusVpdPtr, BusVpdLen, agent, frame, card); +out_free: kfree(BusVpdPtr); } + +/* + * Prints the device information. + * - Pass in pci_dev* pointer to the device. + * - Pass in the device count + * + * Format: + * PCI: Bus 0, Device 26, Vendor 0x12AE Frame 1, Card C10 Ethernet + * controller + */ +void __init iSeries_Device_Information(struct pci_dev *PciDev, int count) +{ + struct iSeries_Device_Node *DevNode = PciDev->sysdata; + u16 bus; + u8 frame; + char card[4]; + HvSubBusNumber subbus; + HvAgentId agent; + + if (DevNode == NULL) { + printk("%d. PCI: iSeries_Device_Information DevNode is NULL\n", + count); + return; + } + + bus = ISERIES_BUS(DevNode); + subbus = ISERIES_SUBBUS(DevNode); + agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus), + ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus)); + iSeries_Get_Location_Code(bus, agent, &frame, card); + + printk("%d. PCI: Bus%3d, Device%3d, Vendor %04X Frame%3d, Card %4s ", + count, bus, PCI_SLOT(PciDev->devfn), PciDev->vendor, + frame, card); + if (pci_class_name(PciDev->class >> 8) == 0) + printk("0x%04X\n", (int)(PciDev->class >> 8)); + else + printk("%s\n", pci_class_name(PciDev->class >> 8)); +} diff --git a/arch/ppc64/kernel/iSeries_iommu.c b/arch/ppc64/kernel/iSeries_iommu.c index 4e1a47c8a802..f8ff1bb054dc 100644 --- a/arch/ppc64/kernel/iSeries_iommu.c +++ b/arch/ppc64/kernel/iSeries_iommu.c @@ -83,7 +83,7 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) } } - +#ifdef CONFIG_PCI /* * This function compares the known tables to find an iommu_table * that has already been built for hardware TCEs. @@ -159,6 +159,7 @@ void iommu_devnode_init_iSeries(struct iSeries_Device_Node *dn) else kfree(tbl); } +#endif static void iommu_dev_setup_iSeries(struct pci_dev *dev) { } static void iommu_bus_setup_iSeries(struct pci_bus *bus) { } diff --git a/arch/ppc64/kernel/iSeries_irq.c b/arch/ppc64/kernel/iSeries_irq.c index f831d259dbb7..77376c1bd611 100644 --- a/arch/ppc64/kernel/iSeries_irq.c +++ b/arch/ppc64/kernel/iSeries_irq.c @@ -1,27 +1,29 @@ -/************************************************************************/ -/* This module supports the iSeries PCI bus interrupt handling */ -/* Copyright (C) 20yy <Robert L Holtorf> <IBM Corp> */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will be useful, */ -/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ -/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ -/* GNU General Public License for more details. */ -/* */ -/* You should have received a copy of the GNU General Public License */ -/* along with this program; if not, write to the: */ -/* Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, */ -/* Boston, MA 02111-1307 USA */ -/************************************************************************/ -/* Change Activity: */ -/* Created, December 13, 2000 by Wayne Holm */ -/* End Change Activity */ -/************************************************************************/ +/* + * This module supports the iSeries PCI bus interrupt handling + * Copyright (C) 20yy <Robert L Holtorf> <IBM Corp> + * Copyright (C) 2004-2005 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, December 13, 2000 by Wayne Holm + * End Change Activity + */ +#include <linux/config.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/threads.h> @@ -30,30 +32,15 @@ #include <linux/string.h> #include <linux/bootmem.h> #include <linux/ide.h> - #include <linux/irq.h> #include <linux/spinlock.h> -#include <asm/ppcdebug.h> +#include <asm/ppcdebug.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallPci.h> #include <asm/iSeries/HvCallXm.h> #include <asm/iSeries/iSeries_irq.h> -#include <asm/iSeries/XmPciLpEvent.h> - -static unsigned int iSeries_startup_IRQ(unsigned int irq); -static void iSeries_shutdown_IRQ(unsigned int irq); -static void iSeries_enable_IRQ(unsigned int irq); -static void iSeries_disable_IRQ(unsigned int irq); -static void iSeries_end_IRQ(unsigned int irq); - -static hw_irq_controller iSeries_IRQ_handler = { - .typename = "iSeries irq controller", - .startup = iSeries_startup_IRQ, - .shutdown = iSeries_shutdown_IRQ, - .enable = iSeries_enable_IRQ, - .disable = iSeries_disable_IRQ, - .end = iSeries_end_IRQ -}; /* This maps virtual irq numbers to real irqs */ unsigned int virt_irq_to_real_map[NR_IRQS]; @@ -62,37 +49,187 @@ unsigned int virt_irq_to_real_map[NR_IRQS]; /* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ static int next_virtual_irq = 2; -/* This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c */ -void __init iSeries_init_IRQ(void) +static long Pci_Interrupt_Count; +static long Pci_Event_Count; + +enum XmPciLpEvent_Subtype { + XmPciLpEvent_BusCreated = 0, // PHB has been created + XmPciLpEvent_BusError = 1, // PHB has failed + XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus + XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed + XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered + XmPciLpEvent_BusRecovered = 12, // PHB has been recovered + XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing + XmPciLpEvent_BridgeError = 21, // Bridge Error + XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt +}; + +struct XmPciLpEvent_BusInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; +}; + +struct XmPciLpEvent_NodeInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; +}; + +struct XmPciLpEvent { + struct HvLpEvent hvLpEvent; + + union { + u64 alignData; // Align on an 8-byte boundary + + struct { + u32 fisr; + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; + } slotInterrupt; + + struct XmPciLpEvent_BusInterrupt busFailed; + struct XmPciLpEvent_BusInterrupt busRecovered; + struct XmPciLpEvent_BusInterrupt busCreated; + + struct XmPciLpEvent_NodeInterrupt nodeFailed; + struct XmPciLpEvent_NodeInterrupt nodeRecovered; + + } eventData; + +}; + +static void intReceived(struct XmPciLpEvent *eventParm, + struct pt_regs *regsParm) { - /* Register PCI event handler and open an event path */ - XmPciLpEvent_init(); + int irq; + + ++Pci_Interrupt_Count; + + switch (eventParm->hvLpEvent.xSubtype) { + case XmPciLpEvent_SlotInterrupt: + irq = eventParm->hvLpEvent.xCorrelationToken; + /* Dispatch the interrupt handlers for this irq */ + ppc_irq_dispatch_handler(regsParm, irq); + HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, + eventParm->eventData.slotInterrupt.subBusNumber, + eventParm->eventData.slotInterrupt.deviceId); + break; + /* Ignore error recovery events for now */ + case XmPciLpEvent_BusCreated: + printk(KERN_INFO "intReceived: system bus %d created\n", + eventParm->eventData.busCreated.busNumber); + break; + case XmPciLpEvent_BusError: + case XmPciLpEvent_BusFailed: + printk(KERN_INFO "intReceived: system bus %d failed\n", + eventParm->eventData.busFailed.busNumber); + break; + case XmPciLpEvent_BusRecovered: + case XmPciLpEvent_UnQuiesceBus: + printk(KERN_INFO "intReceived: system bus %d recovered\n", + eventParm->eventData.busRecovered.busNumber); + break; + case XmPciLpEvent_NodeFailed: + case XmPciLpEvent_BridgeError: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d failed\n", + eventParm->eventData.nodeFailed.busNumber, + eventParm->eventData.nodeFailed.subBusNumber, + eventParm->eventData.nodeFailed.deviceId); + break; + case XmPciLpEvent_NodeRecovered: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d recovered\n", + eventParm->eventData.nodeRecovered.busNumber, + eventParm->eventData.nodeRecovered.subBusNumber, + eventParm->eventData.nodeRecovered.deviceId); + break; + default: + printk(KERN_ERR + "intReceived: unrecognized event subtype 0x%x\n", + eventParm->hvLpEvent.xSubtype); + break; + } +} + +static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, + struct pt_regs *regsParm) +{ +#ifdef CONFIG_PCI + ++Pci_Event_Count; + + if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { + switch (eventParm->xFlags.xFunction) { + case HvLpEvent_Function_Int: + intReceived((struct XmPciLpEvent *)eventParm, regsParm); + break; + case HvLpEvent_Function_Ack: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected ack received\n"); + break; + default: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected event function %d\n", + (int)eventParm->xFlags.xFunction); + break; + } + } else if (eventParm) + printk(KERN_ERR + "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n", + (int)eventParm->xType); + else + printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n"); +#endif } /* - * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot - * It calculates the irq value for the slot. - * Note that subBusNumber is always 0 (at the moment at least). + * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c + * It must be called before the bus walk. */ -int __init iSeries_allocate_IRQ(HvBusNumber busNumber, - HvSubBusNumber subBusNumber, HvAgentId deviceId) +void __init iSeries_init_IRQ(void) { - unsigned int realirq, virtirq; - u8 idsel = (deviceId >> 4); - u8 function = deviceId & 7; - - virtirq = next_virtual_irq++; - realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; - virt_irq_to_real_map[virtirq] = realirq; + /* Register PCI event handler and open an event path */ + int xRc; - irq_desc[virtirq].handler = &iSeries_IRQ_handler; - return virtirq; + xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, + &XmPciLpEvent_handler); + if (xRc == 0) { + xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); + if (xRc != 0) + printk(KERN_ERR "iSeries_init_IRQ: open event path " + "failed with rc 0x%x\n", xRc); + } else + printk(KERN_ERR "iSeries_init_IRQ: register handler " + "failed with rc 0x%x\n", xRc); } #define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) #define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) #define REAL_IRQ_TO_FUNC(irq) ((irq) & 7) +/* + * This will be called by device drivers (via enable_IRQ) + * to enable INTA in the bridge interrupt status register. + */ +static void iSeries_enable_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* The IRQ has already been locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Unmask secondary INTA */ + mask = 0x80000000; + HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); + PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", + bus, subBus, deviceId, irq); +} + /* This is called by iSeries_activate_IRQs */ static unsigned int iSeries_startup_IRQ(unsigned int irq) { @@ -131,7 +268,7 @@ void __init iSeries_activate_IRQs() desc->handler->startup(irq); spin_unlock_irqrestore(&desc->lock, flags); } - } + } } /* this is not called anywhere currently */ @@ -173,29 +310,7 @@ static void iSeries_disable_IRQ(unsigned int irq) mask = 0x80000000; HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); -} - -/* - * This will be called by device drivers (via enable_IRQ) - * to enable INTA in the bridge interrupt status register. - */ -static void iSeries_enable_IRQ(unsigned int irq) -{ - u32 bus, deviceId, function, mask; - const u32 subBus = 0; - unsigned int rirq = virt_irq_to_real_map[irq]; - - /* The IRQ has already been locked by the caller */ - bus = REAL_IRQ_TO_BUS(rirq); - function = REAL_IRQ_TO_FUNC(rirq); - deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; - - /* Unmask secondary INTA */ - mask = 0x80000000; - HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); + bus, subBus, deviceId, irq); } /* @@ -207,3 +322,32 @@ static void iSeries_enable_IRQ(unsigned int irq) static void iSeries_end_IRQ(unsigned int irq) { } + +static hw_irq_controller iSeries_IRQ_handler = { + .typename = "iSeries irq controller", + .startup = iSeries_startup_IRQ, + .shutdown = iSeries_shutdown_IRQ, + .enable = iSeries_enable_IRQ, + .disable = iSeries_disable_IRQ, + .end = iSeries_end_IRQ +}; + +/* + * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot + * It calculates the irq value for the slot. + * Note that subBusNumber is always 0 (at the moment at least). + */ +int __init iSeries_allocate_IRQ(HvBusNumber busNumber, + HvSubBusNumber subBusNumber, HvAgentId deviceId) +{ + unsigned int realirq, virtirq; + u8 idsel = (deviceId >> 4); + u8 function = deviceId & 7; + + virtirq = next_virtual_irq++; + realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; + virt_irq_to_real_map[virtirq] = realirq; + + irq_desc[virtirq].handler = &iSeries_IRQ_handler; + return virtirq; +} diff --git a/arch/ppc64/kernel/iSeries_pci.c b/arch/ppc64/kernel/iSeries_pci.c index bd4c2554f1a0..356e4fd9a94f 100644 --- a/arch/ppc64/kernel/iSeries_pci.c +++ b/arch/ppc64/kernel/iSeries_pci.c @@ -38,9 +38,7 @@ #include <asm/iommu.h> #include <asm/iSeries/HvCallPci.h> -#include <asm/iSeries/HvCallSm.h> #include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/iSeries_irq.h> #include <asm/iSeries/iSeries_pci.h> #include <asm/iSeries/mf.h> @@ -225,10 +223,7 @@ static struct iSeries_Device_Node *build_device_node(HvBusNumber Bus, node->DsaAddr.Dsa.busNumber = Bus; node->DsaAddr.Dsa.subBusNumber = SubBus; node->DsaAddr.Dsa.deviceId = 0x10; - node->AgentId = AgentId; node->DevFn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function); - node->IoRetry = 0; - iSeries_Get_Location_Code(node); return node; } @@ -302,7 +297,6 @@ void __init iSeries_pci_final_fixup(void) { struct pci_dev *pdev = NULL; struct iSeries_Device_Node *node; - char Buffer[256]; int DeviceCount = 0; PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); @@ -324,9 +318,7 @@ void __init iSeries_pci_final_fixup(void) "pdev 0x%p <==> DevNode 0x%p\n", pdev, node); allocate_device_bars(pdev); - iSeries_Device_Information(pdev, Buffer, - sizeof(Buffer)); - printk("%d. %s\n", DeviceCount, Buffer); + iSeries_Device_Information(pdev, DeviceCount); iommu_devnode_init_iSeries(node); } else printk("PCI: Device Tree not found for 0x%016lX\n", @@ -499,7 +491,6 @@ static int scan_bridge_slot(HvBusNumber Bus, ++DeviceCount; node = build_device_node(Bus, SubBus, EADsIdSel, Function); - node->Vendor = VendorId; node->Irq = Irq; node->LogicalSlot = BridgeInfo->logicalSlotNumber; @@ -661,38 +652,34 @@ static struct pci_ops iSeries_pci_ops = { * Check Return Code * -> On Failure, print and log information. * Increment Retry Count, if exceeds max, panic partition. - * -> If in retry, print and log success * * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234 * PCI: Device 23.90 ReadL Retry( 1) * PCI: Device 23.90 ReadL Retry Successful(1) */ static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode, - u64 ret) + int *retry, u64 ret) { if (ret != 0) { ++Pci_Error_Count; - ++DevNode->IoRetry; + (*retry)++; printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n", TextHdr, DevNode->DsaAddr.Dsa.busNumber, DevNode->DevFn, - DevNode->IoRetry, (int)ret); + *retry, (int)ret); /* * Bump the retry and check for retry count exceeded. * If, Exceeded, panic the system. */ - if ((DevNode->IoRetry > Pci_Retry_Max) && + if (((*retry) > Pci_Retry_Max) && (Pci_Error_Flag > 0)) { mf_display_src(0xB6000103); - panic_timeout = 0; + panic_timeout = 0; panic("PCI: Hardware I/O Error, SRC B6000103, " "Automatic Reboot Disabled.\n"); } return -1; /* Retry Try */ } - /* If retry was in progress, log success and rest retry count */ - if (DevNode->IoRetry > 0) - DevNode->IoRetry = 0; - return 0; + return 0; } /* @@ -738,6 +725,7 @@ u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; struct HvCallPci_LoadReturn ret; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -757,7 +745,7 @@ u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) do { ++Pci_Io_Read_Count; HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0); - } while (CheckReturnCode("RDB", DevNode, ret.rc) != 0); + } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0); return (u8)ret.value; } @@ -767,6 +755,7 @@ u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; struct HvCallPci_LoadReturn ret; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -787,7 +776,7 @@ u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) ++Pci_Io_Read_Count; HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa, BarOffset, 0); - } while (CheckReturnCode("RDW", DevNode, ret.rc) != 0); + } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0); return swab16((u16)ret.value); } @@ -797,6 +786,7 @@ u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; struct HvCallPci_LoadReturn ret; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -817,7 +807,7 @@ u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) ++Pci_Io_Read_Count; HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa, BarOffset, 0); - } while (CheckReturnCode("RDL", DevNode, ret.rc) != 0); + } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0); return swab32((u32)ret.value); } @@ -834,6 +824,7 @@ void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; u64 rc; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -853,7 +844,7 @@ void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) do { ++Pci_Io_Write_Count; rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0); - } while (CheckReturnCode("WWB", DevNode, rc) != 0); + } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0); } EXPORT_SYMBOL(iSeries_Write_Byte); @@ -861,6 +852,7 @@ void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; u64 rc; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -880,7 +872,7 @@ void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) do { ++Pci_Io_Write_Count; rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0); - } while (CheckReturnCode("WWW", DevNode, rc) != 0); + } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0); } EXPORT_SYMBOL(iSeries_Write_Word); @@ -888,6 +880,7 @@ void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; u64 rc; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -907,6 +900,6 @@ void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) do { ++Pci_Io_Write_Count; rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0); - } while (CheckReturnCode("WWL", DevNode, rc) != 0); + } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0); } EXPORT_SYMBOL(iSeries_Write_Long); diff --git a/arch/ppc64/kernel/iSeries_pci_reset.c b/arch/ppc64/kernel/iSeries_pci_reset.c deleted file mode 100644 index 0f785e4584f7..000000000000 --- a/arch/ppc64/kernel/iSeries_pci_reset.c +++ /dev/null @@ -1,104 +0,0 @@ -#define PCIFR(...) -/************************************************************************/ -/* File iSeries_pci_reset.c created by Allan Trautman on Mar 21 2001. */ -/************************************************************************/ -/* This code supports the pci interface on the IBM iSeries systems. */ -/* Copyright (C) 20yy <Allan H Trautman> <IBM Corp> */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will be useful, */ -/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ -/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ -/* GNU General Public License for more details. */ -/* */ -/* You should have received a copy of the GNU General Public License */ -/* along with this program; if not, write to the: */ -/* Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, */ -/* Boston, MA 02111-1307 USA */ -/************************************************************************/ -/* Change Activity: */ -/* Created, March 20, 2001 */ -/* April 30, 2001, Added return codes on functions. */ -/* September 10, 2001, Ported to ppc64. */ -/* End Change Activity */ -/************************************************************************/ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/delay.h> - -#include <asm/io.h> -#include <asm/iSeries/HvCallPci.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/mf.h> -#include <asm/pci.h> - -#include <asm/iSeries/iSeries_pci.h> -#include "pci.h" - -/* - * Interface to toggle the reset line - * Time is in .1 seconds, need for seconds. - */ -int iSeries_Device_ToggleReset(struct pci_dev *PciDev, int AssertTime, - int DelayTime) -{ - unsigned int AssertDelay, WaitDelay; - struct iSeries_Device_Node *DeviceNode = - (struct iSeries_Device_Node *)PciDev->sysdata; - - if (DeviceNode == NULL) { - printk("PCI: Pci Reset Failed, Device Node not found for pci_dev %p\n", - PciDev); - return -1; - } - /* - * Set defaults, Assert is .5 second, Wait is 3 seconds. - */ - if (AssertTime == 0) - AssertDelay = 500; - else - AssertDelay = AssertTime * 100; - - if (DelayTime == 0) - WaitDelay = 3000; - else - WaitDelay = DelayTime * 100; - - /* - * Assert reset - */ - DeviceNode->ReturnCode = HvCallPci_setSlotReset(ISERIES_BUS(DeviceNode), - 0x00, DeviceNode->AgentId, 1); - if (DeviceNode->ReturnCode == 0) { - msleep(AssertDelay); /* Sleep for the time */ - DeviceNode->ReturnCode = - HvCallPci_setSlotReset(ISERIES_BUS(DeviceNode), - 0x00, DeviceNode->AgentId, 0); - - /* - * Wait for device to reset - */ - msleep(WaitDelay); - } - if (DeviceNode->ReturnCode == 0) - PCIFR("Slot 0x%04X.%02 Reset\n", ISERIES_BUS(DeviceNode), - DeviceNode->AgentId); - else { - printk("PCI: Slot 0x%04X.%02X Reset Failed, RCode: %04X\n", - ISERIES_BUS(DeviceNode), DeviceNode->AgentId, - DeviceNode->ReturnCode); - PCIFR("Slot 0x%04X.%02X Reset Failed, RCode: %04X\n", - ISERIES_BUS(DeviceNode), DeviceNode->AgentId, - DeviceNode->ReturnCode); - } - return DeviceNode->ReturnCode; -} -EXPORT_SYMBOL(iSeries_Device_ToggleReset); diff --git a/arch/ppc64/kernel/iSeries_proc.c b/arch/ppc64/kernel/iSeries_proc.c index 0cc58ddf48de..356bd9931fcc 100644 --- a/arch/ppc64/kernel/iSeries_proc.c +++ b/arch/ppc64/kernel/iSeries_proc.c @@ -28,8 +28,7 @@ #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvCallXm.h> #include <asm/iSeries/IoHriMainStore.h> -#include <asm/iSeries/LparData.h> -#include <asm/iSeries/iSeries_proc.h> +#include <asm/iSeries/IoHriProcessorVpd.h> static int __init iseries_proc_create(void) { diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index da20120f2261..86966ce76b58 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -47,7 +47,7 @@ #include <asm/paca.h> #include <asm/cache.h> #include <asm/sections.h> -#include <asm/iSeries/LparData.h> +#include <asm/abs_addr.h> #include <asm/iSeries/HvCallHpt.h> #include <asm/iSeries/HvLpConfig.h> #include <asm/iSeries/HvCallEvent.h> @@ -55,10 +55,12 @@ #include <asm/iSeries/HvCallXm.h> #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/IoHriMainStore.h> -#include <asm/iSeries/iSeries_proc.h> #include <asm/iSeries/mf.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/iSeries_irq.h> +#include <asm/iSeries/IoHriProcessorVpd.h> +#include <asm/iSeries/ItVpdAreas.h> +#include <asm/iSeries/LparMap.h> extern void hvlog(char *fmt, ...); @@ -74,7 +76,11 @@ extern void ppcdbg_initialize(void); static void build_iSeries_Memory_Map(void); static void setup_iSeries_cache_sizes(void); static void iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr); +#ifdef CONFIG_PCI extern void iSeries_pci_final_fixup(void); +#else +static void iSeries_pci_final_fixup(void) { } +#endif /* Global Variables */ static unsigned long procFreqHz; @@ -665,9 +671,6 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr) } } -extern unsigned long ppc_proc_freq; -extern unsigned long ppc_tb_freq; - /* * Document me. */ @@ -766,8 +769,6 @@ static void iSeries_halt(void) mf_power_off(); } -extern void setup_default_decr(void); - /* * void __init iSeries_calibrate_decr() * @@ -852,6 +853,32 @@ static int __init iSeries_src_init(void) late_initcall(iSeries_src_init); +static int set_spread_lpevents(char *str) +{ + unsigned long i; + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + for (i = 1; i < val; ++i) + paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; + + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } + + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + +#ifndef CONFIG_PCI +void __init iSeries_init_IRQ(void) { } +#endif + void __init iSeries_early_setup(void) { iSeries_fixup_klimit(); diff --git a/arch/ppc64/kernel/iSeries_smp.c b/arch/ppc64/kernel/iSeries_smp.c index ba1f084d5462..f74386e31638 100644 --- a/arch/ppc64/kernel/iSeries_smp.c +++ b/arch/ppc64/kernel/iSeries_smp.c @@ -38,9 +38,7 @@ #include <asm/io.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/HvCall.h> -#include <asm/iSeries/HvCallCfg.h> #include <asm/time.h> #include <asm/ppcdebug.h> #include <asm/machdep.h> diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 6abc621d3ba0..bdf13b4dc1c8 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -42,6 +42,11 @@ static int (*idle_loop)(void); static unsigned long maxYieldTime = 0; static unsigned long minYieldTime = 0xffffffffffffffffUL; +static inline void process_iSeries_events(void) +{ + asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); +} + static void yield_shared_processor(void) { unsigned long tb; @@ -75,13 +80,9 @@ static int iSeries_idle(void) { struct paca_struct *lpaca; long oldval; - unsigned long CTRL; /* ensure iSeries run light will be out when idle */ - clear_thread_flag(TIF_RUN_LIGHT); - CTRL = mfspr(CTRLF); - CTRL &= ~RUNLATCH; - mtspr(CTRLT, CTRL); + ppc64_runlatch_off(); lpaca = get_paca(); @@ -111,7 +112,9 @@ static int iSeries_idle(void) } } + ppc64_runlatch_on(); schedule(); + ppc64_runlatch_off(); } return 0; @@ -294,7 +297,7 @@ static int native_idle(void) if (need_resched()) schedule(); - if (cpu_is_offline(_smp_processor_id()) && + if (cpu_is_offline(raw_smp_processor_id()) && system_state == SYSTEM_RUNNING) cpu_die(); } diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c index 344164681d2c..8316426ccaf6 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/ppc64/kernel/iommu.c @@ -423,6 +423,9 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl) tbl->it_largehint = tbl->it_halfpoint; spin_lock_init(&tbl->it_lock); + /* Clear the hardware table in case firmware left allocations in it */ + ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); + if (!welcomed) { printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", novmerge ? "disabled" : "enabled"); diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index 4fd7f203c1e3..3defc8c33adf 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -52,7 +52,7 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/LparData.h> +#include <asm/iSeries/ItLpQueue.h> #include <asm/machdep.h> #include <asm/paca.h> @@ -395,6 +395,9 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ + if (ppc64_interrupt_controller == IC_BPA_IIC) + return real_irq; /* no mapping for iic either */ + /* don't map interrupts < MIN_VIRT_IRQ */ if (real_irq < MIN_VIRT_IRQ) { virt_irq_to_real_map[real_irq] = real_irq; diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 103daaf73573..782ce3efa2c1 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -32,40 +32,53 @@ #include <linux/ptrace.h> #include <linux/spinlock.h> #include <linux/preempt.h> +#include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/sstep.h> -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - static struct kprobe *current_kprobe; static unsigned long kprobe_status, kprobe_saved_msr; +static struct kprobe *kprobe_prev; +static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; static struct pt_regs jprobe_saved_regs; int arch_prepare_kprobe(struct kprobe *p) { + int ret = 0; kprobe_opcode_t insn = *p->addr; - if (IS_MTMSRD(insn) || IS_RFID(insn)) - /* cannot put bp on RFID/MTMSRD */ - return 1; - return 0; + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + return ret; } void arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; } -void arch_remove_kprobe(struct kprobe *p) +void arch_arm_kprobe(struct kprobe *p) { + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs) +void arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; - regs->nip = (unsigned long)p->addr; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void arch_remove_kprobe(struct kprobe *p) +{ } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -78,6 +91,20 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->nip = (unsigned long)&p->ainsn.insn; } +static inline void save_previous_kprobe(void) +{ + kprobe_prev = current_kprobe; + kprobe_status_prev = kprobe_status; + kprobe_saved_msr_prev = kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(void) +{ + current_kprobe = kprobe_prev; + kprobe_status = kprobe_status_prev; + kprobe_saved_msr = kprobe_saved_msr_prev; +} + static inline int kprobe_handler(struct pt_regs *regs) { struct kprobe *p; @@ -96,8 +123,19 @@ static inline int kprobe_handler(struct pt_regs *regs) unlock_kprobes(); goto no_kprobe; } - disarm_kprobe(p, regs); - ret = 1; + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(); + current_kprobe = p; + kprobe_saved_msr = regs->msr; + p->nmissed++; + prepare_singlestep(p, regs); + kprobe_status = KPROBE_REENTER; + return 1; } else { p = current_kprobe; if (p->break_handler && p->break_handler(p, regs)) { @@ -172,8 +210,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) ret = emulate_step(regs, p->ainsn.insn[0]); if (ret == 0) regs->nip = (unsigned long)p->addr + 4; - - regs->msr &= ~MSR_SE; } static inline int post_kprobe_handler(struct pt_regs *regs) @@ -181,13 +217,21 @@ static inline int post_kprobe_handler(struct pt_regs *regs) if (!kprobe_running()) return 0; - if (current_kprobe->post_handler) + if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; current_kprobe->post_handler(current_kprobe, regs, 0); + } resume_execution(current_kprobe, regs); regs->msr |= kprobe_saved_msr; + /*Restore back the original saved kprobes variables and continue. */ + if (kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(); + goto out; + } unlock_kprobes(); +out: preempt_enable_no_resched(); /* @@ -210,6 +254,7 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) if (kprobe_status & KPROBE_HIT_SS) { resume_execution(current_kprobe, regs); + regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); @@ -233,8 +278,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, */ preempt_disable(); switch (val) { - case DIE_IABR_MATCH: - case DIE_DABR_MATCH: case DIE_BPT: if (kprobe_handler(args->regs)) ret = NOTIFY_STOP; diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index a8fd32df848b..02e96627fa66 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -28,12 +28,13 @@ #include <asm/uaccess.h> #include <asm/iSeries/HvLpConfig.h> #include <asm/lppaca.h> -#include <asm/iSeries/LparData.h> #include <asm/hvcall.h> #include <asm/cputable.h> #include <asm/rtas.h> #include <asm/system.h> #include <asm/time.h> +#include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/prom.h> #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c new file mode 100644 index 000000000000..fdb2fc649d72 --- /dev/null +++ b/arch/ppc64/kernel/machine_kexec.c @@ -0,0 +1,302 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * + * Copyright (C) 2004-2005, IBM Corp. + * + * Created by: Milton D Miller II + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + + +#include <linux/cpumask.h> +#include <linux/kexec.h> +#include <linux/smp.h> +#include <linux/thread_info.h> +#include <linux/errno.h> + +#include <asm/page.h> +#include <asm/current.h> +#include <asm/machdep.h> +#include <asm/cacheflush.h> +#include <asm/paca.h> +#include <asm/mmu.h> +#include <asm/sections.h> /* _end */ +#include <asm/prom.h> + +#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ + +/* Have this around till we move it into crash specific file */ +note_buf_t crash_notes[NR_CPUS]; + +/* Dummy for now. Not sure if we need to have a crash shutdown in here + * and if what it will achieve. Letting it be now to compile the code + * in generic kexec environment + */ +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* do nothing right now */ + /* smp_relase_cpus() if we want smp on panic kernel */ + /* cpu_irq_down to isolate us until we are ready */ +} + +int machine_kexec_prepare(struct kimage *image) +{ + int i; + unsigned long begin, end; /* limits of segment */ + unsigned long low, high; /* limits of blocked memory range */ + struct device_node *node; + unsigned long *basep; + unsigned int *sizep; + + if (!ppc_md.hpte_clear_all) + return -ENOENT; + + /* + * Since we use the kernel fault handlers and paging code to + * handle the virtual mode, we must make sure no destination + * overlaps kernel static data or bss. + */ + for (i = 0; i < image->nr_segments; i++) + if (image->segment[i].mem < __pa(_end)) + return -ETXTBSY; + + /* + * For non-LPAR, we absolutely can not overwrite the mmu hash + * table, since we are still using the bolted entries in it to + * do the copy. Check that here. + * + * It is safe if the end is below the start of the blocked + * region (end <= low), or if the beginning is after the + * end of the blocked region (begin >= high). Use the + * boolean identity !(a || b) === (!a && !b). + */ + if (htab_address) { + low = __pa(htab_address); + high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + /* We also should not overwrite the tce tables */ + for (node = of_find_node_by_type(NULL, "pci"); node != NULL; + node = of_find_node_by_type(node, "pci")) { + basep = (unsigned long *)get_property(node, "linux,tce-base", + NULL); + sizep = (unsigned int *)get_property(node, "linux,tce-size", + NULL); + if (basep == NULL || sizep == NULL) + continue; + + low = *basep; + high = low + (*sizep); + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + /* we do nothing in prepare that needs to be undone */ +} + +#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE) + +static void copy_segments(unsigned long ind) +{ + unsigned long entry; + unsigned long *ptr; + void *dest; + void *addr; + + /* + * We rely on kexec_load to create a lists that properly + * initializes these pointers before they are used. + * We will still crash if the list is wrong, but at least + * the compiler will be quiet. + */ + ptr = NULL; + dest = NULL; + + for (entry = ind; !(entry & IND_DONE); entry = *ptr++) { + addr = __va(entry & PAGE_MASK); + + switch (entry & IND_FLAGS) { + case IND_DESTINATION: + dest = addr; + break; + case IND_INDIRECTION: + ptr = addr; + break; + case IND_SOURCE: + copy_page(dest, addr); + dest += PAGE_SIZE; + } + } +} + +void kexec_copy_flush(struct kimage *image) +{ + long i, nr_segments = image->nr_segments; + struct kexec_segment ranges[KEXEC_SEGMENT_MAX]; + + /* save the ranges on the stack to efficiently flush the icache */ + memcpy(ranges, image->segment, sizeof(ranges)); + + /* + * After this call we may not use anything allocated in dynamic + * memory, including *image. + * + * Only globals and the stack are allowed. + */ + copy_segments(image->head); + + /* + * we need to clear the icache for all dest pages sometime, + * including ones that were in place on the original copy + */ + for (i = 0; i < nr_segments; i++) + flush_icache_range(ranges[i].mem + KERNELBASE, + ranges[i].mem + KERNELBASE + + ranges[i].memsz); +} + +#ifdef CONFIG_SMP + +/* FIXME: we should schedule this function to be called on all cpus based + * on calling the interrupts, but we would like to call it off irq level + * so that the interrupt controller is clean. + */ +void kexec_smp_down(void *arg) +{ + if (ppc_md.cpu_irq_down) + ppc_md.cpu_irq_down(); + + local_irq_disable(); + kexec_smp_wait(); + /* NOTREACHED */ +} + +static void kexec_prepare_cpus(void) +{ + int my_cpu, i, notified=-1; + + smp_call_function(kexec_smp_down, NULL, 0, /* wait */0); + my_cpu = get_cpu(); + + /* check the others cpus are now down (via paca hw cpu id == -1) */ + for (i=0; i < NR_CPUS; i++) { + if (i == my_cpu) + continue; + + while (paca[i].hw_cpu_id != -1) { + if (!cpu_possible(i)) { + printk("kexec: cpu %d hw_cpu_id %d is not" + " possible, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (!cpu_online(i)) { + /* Fixme: this can be spinning in + * pSeries_secondary_wait with a paca + * waiting for it to go online. + */ + printk("kexec: cpu %d hw_cpu_id %d is not" + " online, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (i != notified) { + printk( "kexec: waiting for cpu %d (physical" + " %d) to go down\n", + i, paca[i].hw_cpu_id); + notified = i; + } + } + } + + /* after we tell the others to go down */ + if (ppc_md.cpu_irq_down) + ppc_md.cpu_irq_down(); + + put_cpu(); + + local_irq_disable(); +} + +#else /* ! SMP */ + +static void kexec_prepare_cpus(void) +{ + /* + * move the secondarys to us so that we can copy + * the new kernel 0-0x100 safely + * + * do this if kexec in setup.c ? + */ + smp_relase_cpus(); + if (ppc_md.cpu_irq_down) + ppc_md.cpu_irq_down(); + local_irq_disable(); +} + +#endif /* SMP */ + +/* + * kexec thread structure and stack. + * + * We need to make sure that this is 16384-byte aligned due to the + * way process stacks are handled. It also must be statically allocated + * or allocated as part of the kimage, because everything else may be + * overwritten when we copy the kexec image. We piggyback on the + * "init_task" linker section here to statically allocate a stack. + * + * We could use a smaller stack if we don't care about anything using + * current, but that audit has not been performed. + */ +union thread_union kexec_stack + __attribute__((__section__(".data.init_task"))) = { }; + +/* Our assembly helper, in kexec_stub.S */ +extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, + void *image, void *control, + void (*clear_all)(void)) ATTRIB_NORET; + +/* too late to fail here */ +void machine_kexec(struct kimage *image) +{ + + /* prepare control code if any */ + + /* shutdown other cpus into our wait loop and quiesce interrupts */ + kexec_prepare_cpus(); + + /* switch to a staticly allocated stack. Based on irq stack code. + * XXX: the task struct will likely be invalid once we do the copy! + */ + kexec_stack.thread_info.task = current_thread_info()->task; + kexec_stack.thread_info.flags = 0; + + /* Some things are best done in assembly. Finding globals with + * a toc is easier in C, so pass in what we can. + */ + kexec_sequence(&kexec_stack, image->start, image, + page_address(image->control_code_page), + ppc_md.hpte_clear_all); + /* NOTREACHED */ +} diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c index 8cf95a27178e..da8900b51f40 100644 --- a/arch/ppc64/kernel/maple_setup.c +++ b/arch/ppc64/kernel/maple_setup.c @@ -78,17 +78,77 @@ extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); extern void generic_find_legacy_serial_ports(u64 *physport, unsigned int *default_speed); - static void maple_restart(char *cmd) { + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "restart-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "restart-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; } static void maple_power_off(void) { + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "power-off-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "power-off-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; } static void maple_halt(void) { + maple_power_off(); } #ifdef CONFIG_SMP @@ -235,6 +295,6 @@ struct machdep_calls __initdata maple_md = { .get_boot_time = maple_get_boot_time, .set_rtc_time = maple_set_rtc_time, .get_rtc_time = maple_get_rtc_time, - .calibrate_decr = maple_calibrate_decr, + .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, }; diff --git a/arch/ppc64/kernel/maple_time.c b/arch/ppc64/kernel/maple_time.c index 07ce7895b43d..d65210abcd03 100644 --- a/arch/ppc64/kernel/maple_time.c +++ b/arch/ppc64/kernel/maple_time.c @@ -42,11 +42,8 @@ #define DBG(x...) #endif -extern void setup_default_decr(void); extern void GregorianDay(struct rtc_time * tm); -extern unsigned long ppc_tb_freq; -extern unsigned long ppc_proc_freq; static int maple_rtc_addr; static int maple_clock_read(int addr) @@ -176,51 +173,3 @@ void __init maple_get_boot_time(struct rtc_time *tm) maple_get_rtc_time(tm); } -/* XXX FIXME: Some sane defaults: 125 MHz timebase, 1GHz processor */ -#define DEFAULT_TB_FREQ 125000000UL -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) - -void __init maple_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp = NULL; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; - if (cpu != 0) - fp = (unsigned int *)get_property(cpu, "timebase-frequency", NULL); - if (fp != NULL) - ppc_tb_freq = *fp; - else - printk(KERN_ERR "WARNING: Estimating decrementer frequency (not found)\n"); - fp = NULL; - ppc_proc_freq = DEFAULT_PROC_FREQ; - if (cpu != 0) - fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL); - if (fp != NULL) - ppc_proc_freq = *fp; - else - printk(KERN_ERR "WARNING: Estimating processor frequency (not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index 5aca7e8005a8..d98bebf7042f 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -40,7 +40,6 @@ #include <asm/iSeries/vio.h> #include <asm/iSeries/mf.h> #include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/ItSpCommArea.h> #include <asm/iSeries/ItLpQueue.h> /* diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index b944717c1dbd..f3dea0c5a88c 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -680,6 +680,177 @@ _GLOBAL(kernel_thread) ld r30,-16(r1) blr +/* kexec_wait(phys_cpu) + * + * wait for the flag to change, indicating this kernel is going away but + * the slave code for the next one is at addresses 0 to 100. + * + * This is used by all slaves. + * + * Physical (hardware) cpu id should be in r3. + */ +_GLOBAL(kexec_wait) + bl 1f +1: mflr r5 + addi r5,r5,kexec_flag-1b + +99: HMT_LOW +#ifdef CONFIG_KEXEC /* use no memory without kexec */ + lwz r4,0(r5) + cmpwi 0,r4,0 + bnea 0x60 +#endif + b 99b + +/* this can be in text because we won't change it until we are + * running in real anyways + */ +kexec_flag: + .long 0 + + +#ifdef CONFIG_KEXEC + +/* kexec_smp_wait(void) + * + * call with interrupts off + * note: this is a terminal routine, it does not save lr + * + * get phys id from paca + * set paca id to -1 to say we got here + * switch to real mode + * join other cpus in kexec_wait(phys_id) + */ +_GLOBAL(kexec_smp_wait) + lhz r3,PACAHWCPUID(r13) + li r4,-1 + sth r4,PACAHWCPUID(r13) /* let others know we left */ + bl real_mode + b .kexec_wait + +/* + * switch to real mode (turn mmu off) + * we use the early kernel trick that the hardware ignores bits + * 0 and 1 (big endian) of the effective address in real mode + * + * don't overwrite r3 here, it is live for kexec_wait above. + */ +real_mode: /* assume normal blr return */ +1: li r9,MSR_RI + li r10,MSR_DR|MSR_IR + mflr r11 /* return address to SRR0 */ + mfmsr r12 + andc r9,r12,r9 + andc r10,r12,r10 + + mtmsrd r9,1 + mtspr SPRN_SRR1,r10 + mtspr SPRN_SRR0,r11 + rfid + + +/* + * kexec_sequence(newstack, start, image, control, clear_all()) + * + * does the grungy work with stack switching and real mode switches + * also does simple calls to other code + */ + +_GLOBAL(kexec_sequence) + mflr r0 + std r0,16(r1) + + /* switch stacks to newstack -- &kexec_stack.stack */ + stdu r1,THREAD_SIZE-112(r3) + mr r1,r3 + + li r0,0 + std r0,16(r1) + + /* save regs for local vars on new stack. + * yes, we won't go back, but ... + */ + std r31,-8(r1) + std r30,-16(r1) + std r29,-24(r1) + std r28,-32(r1) + std r27,-40(r1) + std r26,-48(r1) + std r25,-56(r1) + + stdu r1,-112-64(r1) + + /* save args into preserved regs */ + mr r31,r3 /* newstack (both) */ + mr r30,r4 /* start (real) */ + mr r29,r5 /* image (virt) */ + mr r28,r6 /* control, unused */ + mr r27,r7 /* clear_all() fn desc */ + mr r26,r8 /* spare */ + lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ + + /* disable interrupts, we are overwriting kernel data next */ + mfmsr r3 + rlwinm r3,r3,0,17,15 + mtmsrd r3,1 + + /* copy dest pages, flush whole dest image */ + mr r3,r29 + bl .kexec_copy_flush /* (image) */ + + /* turn off mmu */ + bl real_mode + + /* clear out hardware hash page table and tlb */ + ld r5,0(r27) /* deref function descriptor */ + mtctr r5 + bctrl /* ppc_md.hash_clear_all(void); */ + +/* + * kexec image calling is: + * the first 0x100 bytes of the entry point are copied to 0 + * + * all slaves branch to slave = 0x60 (absolute) + * slave(phys_cpu_id); + * + * master goes to start = entry point + * start(phys_cpu_id, start, 0); + * + * + * a wrapper is needed to call existing kernels, here is an approximate + * description of one method: + * + * v2: (2.6.10) + * start will be near the boot_block (maybe 0x100 bytes before it?) + * it will have a 0x60, which will b to boot_block, where it will wait + * and 0 will store phys into struct boot-block and load r3 from there, + * copy kernel 0-0x100 and tell slaves to back down to 0x60 again + * + * v1: (2.6.9) + * boot block will have all cpus scanning device tree to see if they + * are the boot cpu ????? + * other device tree differences (prop sizes, va vs pa, etc)... + */ + + /* copy 0x100 bytes starting at start to 0 */ + li r3,0 + mr r4,r30 + li r5,0x100 + li r6,0 + bl .copy_and_flush /* (dest, src, copy limit, start offset) */ +1: /* assume normal blr return */ + + /* release other cpus to the new kernel secondary start at 0x60 */ + mflr r5 + li r6,1 + stw r6,kexec_flag-1b(5) + mr r3,r25 # my phys cpu + mr r4,r30 # start, aka phys mem offset + mtlr 4 + li r5,0 + blr /* image->start(physid, image->start, 0); */ +#endif /* CONFIG_KEXEC */ + /* Why isn't this a) automatic, b) written in 'C'? */ .balign 8 _GLOBAL(sys_call_table32) @@ -792,7 +963,7 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_newstat .llong .compat_sys_newlstat .llong .compat_sys_newfstat - .llong .sys_uname + .llong .sys32_uname .llong .sys_ni_syscall /* 110 old iopl syscall */ .llong .sys_vhangup .llong .sys_ni_syscall /* old idle syscall */ @@ -951,7 +1122,7 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_mq_timedreceive /* 265 */ .llong .compat_sys_mq_notify .llong .compat_sys_mq_getsetattr - .llong .sys_ni_syscall /* 268 reserved for sys_kexec_load */ + .llong .compat_sys_kexec_load .llong .sys32_add_key .llong .sys32_request_key .llong .compat_sys_keyctl @@ -1227,7 +1398,7 @@ _GLOBAL(sys_call_table) .llong .sys_mq_timedreceive /* 265 */ .llong .sys_mq_notify .llong .sys_mq_getsetattr - .llong .sys_ni_syscall /* 268 reserved for sys_kexec_load */ + .llong .sys_kexec_load .llong .sys_add_key .llong .sys_request_key /* 270 */ .llong .sys_keyctl diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c index 593ea5b82afa..e8fbab1df37f 100644 --- a/arch/ppc64/kernel/mpic.c +++ b/arch/ppc64/kernel/mpic.c @@ -792,6 +792,35 @@ void mpic_setup_this_cpu(void) #endif /* CONFIG_SMP */ } +/* + * XXX: someone who knows mpic should check this. + * do we need to eoi the ipi here (see xics comments)? + * or can we reset the mpic in the new kernel? + */ +void mpic_teardown_this_cpu(void) +{ + struct mpic *mpic = mpic_primary; + unsigned long flags; + u32 msk = 1 << hard_smp_processor_id(); + unsigned int i; + + BUG_ON(mpic == NULL); + + DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); + spin_lock_irqsave(&mpic_lock, flags); + + /* let the mpic know we don't want intrs. */ + for (i = 0; i < mpic->num_sources ; i++) + mpic_irq_write(i, MPIC_IRQ_DESTINATION, + mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk); + + /* Set current processor priority to max */ + mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); + + spin_unlock_irqrestore(&mpic_lock, flags); +} + + void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) { struct mpic *mpic = mpic_primary; diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h index 571b3c99e062..99fbbc9a084c 100644 --- a/arch/ppc64/kernel/mpic.h +++ b/arch/ppc64/kernel/mpic.h @@ -255,6 +255,9 @@ extern unsigned int mpic_irq_get_priority(unsigned int irq); /* Setup a non-boot CPU */ extern void mpic_setup_this_cpu(void); +/* Clean up for kexec (or cpu offline or ...) */ +extern void mpic_teardown_this_cpu(void); + /* Request IPIs on primary mpic */ extern void mpic_request_ipis(void); @@ -265,3 +268,6 @@ extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); /* This one gets to the primary mpic */ extern int mpic_get_irq(struct pt_regs *regs); + +/* global mpic for pSeries */ +extern struct mpic *pSeries_mpic; diff --git a/arch/ppc64/kernel/of_device.c b/arch/ppc64/kernel/of_device.c index f4c825a69fa0..66bd5ab7c25a 100644 --- a/arch/ppc64/kernel/of_device.c +++ b/arch/ppc64/kernel/of_device.c @@ -161,7 +161,7 @@ void of_unregister_driver(struct of_platform_driver *drv) } -static ssize_t dev_show_devspec(struct device *dev, char *buf) +static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct of_device *ofdev; diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c index 0b1cca281408..1f5f141fb7a1 100644 --- a/arch/ppc64/kernel/pSeries_pci.c +++ b/arch/ppc64/kernel/pSeries_pci.c @@ -1,13 +1,11 @@ /* - * pSeries_pci.c + * arch/ppc64/kernel/pSeries_pci.c * * Copyright (C) 2001 Dave Engebretsen, IBM Corporation * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * * pSeries specific routines for PCI. * - * Based on code from pci.c and chrp_pci.c - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -23,430 +21,18 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/init.h> +#include <linux/ioport.h> #include <linux/kernel.h> -#include <linux/threads.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/machdep.h> #include <asm/pci-bridge.h> -#include <asm/iommu.h> -#include <asm/rtas.h> +#include <asm/prom.h> -#include "mpic.h" #include "pci.h" -/* RTAS tokens */ -static int read_pci_config; -static int write_pci_config; -static int ibm_read_pci_config; -static int ibm_write_pci_config; - -static int s7a_workaround; - -extern struct mpic *pSeries_mpic; - -static int config_access_valid(struct device_node *dn, int where) -{ - if (where < 256) - return 1; - if (where < 4096 && dn->pci_ext_config_space) - return 1; - - return 0; -} - -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) -{ - int returnval = -1; - unsigned long buid, addr; - int ret; - - if (!dn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; - if (buid) { - ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); - } else { - ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); - } - *val = returnval; - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (returnval == EEH_IO_ERROR_VALUE(size) - && eeh_dn_check_failure (dn, NULL)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 *val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) - return rtas_read_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) -{ - unsigned long buid, addr; - int ret; - - if (!dn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; - if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); - } else { - ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); - } - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) - return rtas_write_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config -}; - -int is_python(struct device_node *dev) -{ - char *model = (char *)get_property(dev, "model", NULL); - - if (model && strstr(model, "Python")) - return 1; - - return 0; -} - -static int get_phb_reg_prop(struct device_node *dev, - unsigned int addr_size_words, - struct reg_property64 *reg) -{ - unsigned int *ui_ptr = NULL, len; - - /* Found a PHB, now figure out where his registers are mapped. */ - ui_ptr = (unsigned int *)get_property(dev, "reg", &len); - if (ui_ptr == NULL) - return 1; - - if (addr_size_words == 1) { - reg->address = ((struct reg_property32 *)ui_ptr)->address; - reg->size = ((struct reg_property32 *)ui_ptr)->size; - } else { - *reg = *((struct reg_property64 *)ui_ptr); - } - - return 0; -} - -static void python_countermeasures(struct device_node *dev, - unsigned int addr_size_words) -{ - struct reg_property64 reg_struct; - void __iomem *chip_regs; - volatile u32 val; - - if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) - return; - - /* Python's register file is 1 MB in size. */ - chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - - /* - * Firmware doesn't always clear this bit which is critical - * for good performance - Anton - */ - -#define PRG_CL_RESET_VALID 0x00010000 - - val = in_be32(chip_regs + 0xf6030); - if (val & PRG_CL_RESET_VALID) { - printk(KERN_INFO "Python workaround: "); - val &= ~PRG_CL_RESET_VALID; - out_be32(chip_regs + 0xf6030, val); - /* - * We must read it back for changes to - * take effect - */ - val = in_be32(chip_regs + 0xf6030); - printk("reg0: %x\n", val); - } - - iounmap(chip_regs); -} - -void __init init_pci_config_tokens (void) -{ - read_pci_config = rtas_token("read-pci-config"); - write_pci_config = rtas_token("write-pci-config"); - ibm_read_pci_config = rtas_token("ibm,read-pci-config"); - ibm_write_pci_config = rtas_token("ibm,write-pci-config"); -} - -unsigned long __devinit get_phb_buid (struct device_node *phb) -{ - int addr_cells; - unsigned int *buid_vals; - unsigned int len; - unsigned long buid; - - if (ibm_read_pci_config == -1) return 0; - - /* PHB's will always be children of the root node, - * or so it is promised by the current firmware. */ - if (phb->parent == NULL) - return 0; - if (phb->parent->parent) - return 0; - - buid_vals = (unsigned int *) get_property(phb, "reg", &len); - if (buid_vals == NULL) - return 0; - - addr_cells = prom_n_addr_cells(phb); - if (addr_cells == 1) { - buid = (unsigned long) buid_vals[0]; - } else { - buid = (((unsigned long)buid_vals[0]) << 32UL) | - (((unsigned long)buid_vals[1]) & 0xffffffff); - } - return buid; -} - -static int phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) -{ - int *bus_range; - unsigned int len; - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - return 1; - } - - phb->first_busno = bus_range[0]; - phb->last_busno = bus_range[1]; - - return 0; -} - -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb, - unsigned int addr_size_words) -{ - pci_setup_pci_controller(phb); - - if (is_python(dev)) - python_countermeasures(dev, addr_size_words); - - if (phb_set_bus_ranges(dev, phb)) - return 1; - - phb->arch_data = dev; - phb->ops = &rtas_pci_ops; - phb->buid = get_phb_buid(dev); - - return 0; -} - -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - -unsigned long __init find_and_init_phbs(void) -{ - struct device_node *node; - struct pci_controller *phb; - unsigned int root_size_cells = 0; - unsigned int index; - unsigned int *opprop = NULL; - struct device_node *root = of_find_node_by_path("/"); - - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - opprop = (unsigned int *)get_property(root, - "platform-open-pic", NULL); - } - - root_size_cells = prom_n_size_cells(root); - - index = 0; - - for (node = of_get_next_child(root, NULL); - node != NULL; - node = of_get_next_child(root, node)) { - if (node->type == NULL || strcmp(node->type, "pci") != 0) - continue; - - phb = alloc_phb(node, root_size_cells); - if (!phb) - continue; - - pci_process_bridge_OF_ranges(phb, node); - pci_setup_phb_io(phb, index == 0); - - if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { - int addr = root_size_cells * (index + 2) - 1; - mpic_assign_isu(pSeries_mpic, index, opprop[addr]); - } - - index++; - } - - of_node_put(root); - pci_devs_phb_init(); - - /* - * pci_probe_only and pci_assign_all_buses can be set via properties - * in chosen. - */ - if (of_chosen) { - int *prop; - - prop = (int *)get_property(of_chosen, "linux,pci-probe-only", - NULL); - if (prop) - pci_probe_only = *prop; - - prop = (int *)get_property(of_chosen, - "linux,pci-assign-all-buses", NULL); - if (prop) - pci_assign_all_buses = *prop; - } - - return 0; -} - -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct device_node *root = of_find_node_by_path("/"); - unsigned int root_size_cells = 0; - struct pci_controller *phb; - struct pci_bus *bus; - int primary; - - root_size_cells = prom_n_size_cells(root); - - primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); - if (!phb) - return NULL; - - pci_process_bridge_OF_ranges(phb, dn); - - pci_setup_phb_io_dynamic(phb, primary); - of_node_put(root); - - pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); +static int __initdata s7a_workaround = -1; #if 0 void pcibios_name_device(struct pci_dev *dev) @@ -474,11 +60,12 @@ void pcibios_name_device(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); #endif -static void check_s7a(void) +static void __init check_s7a(void) { struct device_node *root; char *model; + s7a_workaround = 0; root = of_find_node_by_path("/"); if (root) { model = get_property(root, "model", NULL); @@ -488,55 +75,23 @@ static void check_s7a(void) } } -/* RPA-specific bits for removing PHBs */ -int pcibios_remove_root_bus(struct pci_controller *phb) +void __devinit pSeries_irq_bus_setup(struct pci_bus *bus) { - struct pci_bus *b = phb->bus; - struct resource *res; - int rc, i; - - res = b->resource[0]; - if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, - b->name); - return 1; - } - - rc = unmap_bus_range(b); - if (rc) { - printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } + struct pci_dev *dev; - if (release_resource(res)) { - printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - for (i = 1; i < 3; ++i) { - res = b->resource[i]; - if (!res->flags && i == 0) { - printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); - return 1; - } - if (res->flags && release_resource(res)) { - printk(KERN_ERR - "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); - return 1; + if (s7a_workaround < 0) + check_s7a(); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_read_irq_line(dev); + if (s7a_workaround) { + if (dev->irq > 16) { + dev->irq -= 3; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } } } - - list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); - - return 0; } -EXPORT_SYMBOL(pcibios_remove_root_bus); static void __init pSeries_request_regions(void) { @@ -553,20 +108,6 @@ static void __init pSeries_request_regions(void) void __init pSeries_final_fixup(void) { - struct pci_dev *dev = NULL; - - check_s7a(); - - for_each_pci_dev(dev) { - pci_read_irq_line(dev); - if (s7a_workaround) { - if (dev->irq > 16) { - dev->irq -= 3; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - } - } - phbs_remap_io(); pSeries_request_regions(); diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49b..dc2a69d412a2 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index 6c0d1d58a552..44d9af72d225 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -71,11 +71,6 @@ #define DBG(fmt...) #endif -extern void pSeries_final_fixup(void); - -extern void pSeries_get_boot_time(struct rtc_time *rtc_time); -extern void pSeries_get_rtc_time(struct rtc_time *rtc_time); -extern int pSeries_set_rtc_time(struct rtc_time *rtc_time); extern void find_udbg_vterm(void); extern void system_reset_fwnmi(void); /* from head.S */ extern void machine_check_fwnmi(void); /* from head.S */ @@ -84,9 +79,6 @@ extern void generic_find_legacy_serial_ports(u64 *physport, int fwnmi_active; /* TRUE if an FWNMI handler is present */ -extern unsigned long ppc_proc_freq; -extern unsigned long ppc_tb_freq; - extern void pSeries_system_reset_exception(struct pt_regs *regs); extern int pSeries_machine_check_exception(struct pt_regs *regs); @@ -195,14 +187,16 @@ static void __init pSeries_setup_arch(void) { /* Fixup ppc_md depending on the type of interrupt controller */ if (ppc64_interrupt_controller == IC_OPEN_PIC) { - ppc_md.init_IRQ = pSeries_init_mpic; + ppc_md.init_IRQ = pSeries_init_mpic; ppc_md.get_irq = mpic_get_irq; + ppc_md.cpu_irq_down = mpic_teardown_this_cpu; /* Allocate the mpic now, so that find_and_init_phbs() can * fill the ISUs */ pSeries_setup_mpic(); } else { ppc_md.init_IRQ = xics_init_IRQ; ppc_md.get_irq = xics_get_irq; + ppc_md.cpu_irq_down = xics_teardown_cpu; } #ifdef CONFIG_SMP @@ -381,171 +375,6 @@ static void __init pSeries_init_early(void) } -static void pSeries_progress(char *s, unsigned short hex) -{ - struct device_node *root; - int width, *p; - char *os; - static int display_character, set_indicator; - static int max_width; - static DEFINE_SPINLOCK(progress_lock); - static int pending_newline = 0; /* did last write end with unprinted newline? */ - - if (!rtas.base) - return; - - if (max_width == 0) { - if ((root = find_path_device("/rtas")) && - (p = (unsigned int *)get_property(root, - "ibm,display-line-length", - NULL))) - max_width = *p; - else - max_width = 0x10; - display_character = rtas_token("display-character"); - set_indicator = rtas_token("set-indicator"); - } - - if (display_character == RTAS_UNKNOWN_SERVICE) { - /* use hex display if available */ - if (set_indicator != RTAS_UNKNOWN_SERVICE) - rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); - return; - } - - spin_lock(&progress_lock); - - /* - * Last write ended with newline, but we didn't print it since - * it would just clear the bottom line of output. Print it now - * instead. - * - * If no newline is pending, print a CR to start output at the - * beginning of the line. - */ - if (pending_newline) { - rtas_call(display_character, 1, 1, NULL, '\r'); - rtas_call(display_character, 1, 1, NULL, '\n'); - pending_newline = 0; - } else { - rtas_call(display_character, 1, 1, NULL, '\r'); - } - - width = max_width; - os = s; - while (*os) { - if (*os == '\n' || *os == '\r') { - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - - /* If newline is the last character, save it - * until next call to avoid bumping up the - * display output. - */ - if (*os == '\n' && !os[1]) { - pending_newline = 1; - spin_unlock(&progress_lock); - return; - } - - /* RTAS wants CR-LF, not just LF */ - - if (*os == '\n') { - rtas_call(display_character, 1, 1, NULL, '\r'); - rtas_call(display_character, 1, 1, NULL, '\n'); - } else { - /* CR might be used to re-draw a line, so we'll - * leave it alone and not add LF. - */ - rtas_call(display_character, 1, 1, NULL, *os); - } - - width = max_width; - } else { - width--; - rtas_call(display_character, 1, 1, NULL, *os); - } - - os++; - - /* if we overwrite the screen length */ - if (width <= 0) - while ((*os != 0) && (*os != '\n') && (*os != '\r')) - os++; - } - - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - - spin_unlock(&progress_lock); -} - -extern void setup_default_decr(void); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -#define DEFAULT_TB_FREQ 125000000UL -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) - -static void __init pSeries_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp; - int node_found; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "timebase-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_tb_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - - ppc_proc_freq = DEFAULT_PROC_FREQ; - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "clock-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_proc_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating processor frequency " - "(not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} - static int pSeries_check_legacy_ioport(unsigned int baseport) { struct device_node *np; @@ -596,16 +425,17 @@ struct machdep_calls __initdata pSeries_md = { .get_cpuinfo = pSeries_get_cpuinfo, .log_error = pSeries_log_error, .pcibios_fixup = pSeries_final_fixup, + .irq_bus_setup = pSeries_irq_bus_setup, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, - .get_boot_time = pSeries_get_boot_time, - .get_rtc_time = pSeries_get_rtc_time, - .set_rtc_time = pSeries_set_rtc_time, - .calibrate_decr = pSeries_calibrate_decr, - .progress = pSeries_progress, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = rtas_progress, .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index fbad349ec58c..62c55a123560 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -1,5 +1,5 @@ /* - * SMP support for pSeries machines. + * SMP support for pSeries and BPA machines. * * Dave Engebretsen, Peter Bergner, and * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com @@ -47,6 +47,7 @@ #include <asm/pSeries_reconfig.h> #include "mpic.h" +#include "bpa_iic.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -92,10 +93,13 @@ static int query_cpu_stopped(unsigned int pcpu) int pSeries_cpu_disable(void) { + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_online_map); systemcfg->processorCount--; /*fix boot_cpuid here*/ - if (smp_processor_id() == boot_cpuid) + if (cpu == boot_cpuid) boot_cpuid = any_online_cpu(cpu_online_map); /* FIXME: abstract this to not be platform specific later on */ @@ -286,6 +290,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) return 1; } +#ifdef CONFIG_XICS static inline void smp_xics_do_message(int cpu, int msg) { set_bit(msg, &xics_ipi_message[cpu].value); @@ -327,6 +332,37 @@ static void __devinit smp_xics_setup_cpu(int cpu) cpu_clear(cpu, of_spin_map); } +#endif /* CONFIG_XICS */ +#ifdef CONFIG_BPA_IIC +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} +#endif /* CONFIG_BPA_IIC */ static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase = 0; @@ -375,20 +411,21 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) * cpus are assumed to be secondary threads. */ if (system_state < SYSTEM_RUNNING && - cur_cpu_spec->cpu_features & CPU_FTR_SMT && + cpu_has_feature(CPU_FTR_SMT) && !smt_enabled_at_boot && nr % 2 != 0) return 0; return 1; } - +#ifdef CONFIG_MPIC static struct smp_ops_t pSeries_mpic_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, .kick_cpu = smp_pSeries_kick_cpu, .setup_cpu = smp_mpic_setup_cpu, }; - +#endif +#ifdef CONFIG_XICS static struct smp_ops_t pSeries_xics_smp_ops = { .message_pass = smp_xics_message_pass, .probe = smp_xics_probe, @@ -396,6 +433,16 @@ static struct smp_ops_t pSeries_xics_smp_ops = { .setup_cpu = smp_xics_setup_cpu, .cpu_bootable = smp_pSeries_cpu_bootable, }; +#endif +#ifdef CONFIG_BPA_IIC +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_pSeries_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_pSeries_cpu_bootable, +}; +#endif /* This is called very early */ void __init smp_init_pSeries(void) @@ -404,10 +451,25 @@ void __init smp_init_pSeries(void) DBG(" -> smp_init_pSeries()\n"); - if (ppc64_interrupt_controller == IC_OPEN_PIC) + switch (ppc64_interrupt_controller) { +#ifdef CONFIG_MPIC + case IC_OPEN_PIC: smp_ops = &pSeries_mpic_smp_ops; - else + break; +#endif +#ifdef CONFIG_XICS + case IC_PPC_XIC: smp_ops = &pSeries_xics_smp_ops; + break; +#endif +#ifdef CONFIG_BPA_IIC + case IC_BPA_IIC: + smp_ops = &bpa_iic_smp_ops; + break; +#endif + default: + panic("Invalid interrupt controller"); + } #ifdef CONFIG_HOTPLUG_CPU smp_ops->cpu_disable = pSeries_cpu_disable; @@ -419,8 +481,8 @@ void __init smp_init_pSeries(void) #endif /* Mark threads which are still spinning in hold loops. */ - if (cur_cpu_spec->cpu_features & CPU_FTR_SMT) - for_each_present_cpu(i) { + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { if (i % 2 == 0) /* * Even-numbered logical cpus correspond to @@ -428,8 +490,9 @@ void __init smp_init_pSeries(void) */ cpu_set(i, of_spin_map); } - else + } else { of_spin_map = cpu_present_map; + } cpu_clear(boot_cpuid, of_spin_map); diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index d786d4b6af0b..580676f87d23 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -507,7 +507,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, } #ifdef CONFIG_PPC_MULTIPLATFORM -static ssize_t pci_show_devspec(struct device *dev, char *buf) +static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct pci_dev *pdev; struct device_node *np; @@ -902,6 +902,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) ppc_md.iommu_dev_setup(dev); + if (ppc_md.irq_bus_setup) + ppc_md.irq_bus_setup(bus); + if (!pci_probe_only) return; diff --git a/arch/ppc64/kernel/pci.h b/arch/ppc64/kernel/pci.h index 0fd7d849aa77..26be78b13af1 100644 --- a/arch/ppc64/kernel/pci.h +++ b/arch/ppc64/kernel/pci.h @@ -40,10 +40,14 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev); void pci_addr_cache_insert_device(struct pci_dev *dev); void pci_addr_cache_remove_device(struct pci_dev *dev); -/* From pSeries_pci.h */ +/* From rtas_pci.h */ void init_pci_config_tokens (void); unsigned long get_phb_buid (struct device_node *); +/* From pSeries_pci.h */ +extern void pSeries_final_fixup(void); +extern void pSeries_irq_bus_setup(struct pci_bus *bus); + extern unsigned long pci_probe_only; extern unsigned long pci_assign_all_buses; extern int pci_read_irq_line(struct pci_dev *pci_dev); diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c index f24827581dd7..3059edb09cc8 100644 --- a/arch/ppc64/kernel/pmac_time.c +++ b/arch/ppc64/kernel/pmac_time.c @@ -40,11 +40,6 @@ #define DBG(x...) #endif -extern void setup_default_decr(void); - -extern unsigned long ppc_tb_freq; -extern unsigned long ppc_proc_freq; - /* Apparently the RTC stores seconds since 1 Jan 1904 */ #define RTC_OFFSET 2082844800 @@ -161,8 +156,7 @@ void __init pmac_get_boot_time(struct rtc_time *tm) /* * Query the OF and get the decr frequency. - * This was taken from the pmac time_init() when merging the prep/pmac - * time functions. + * FIXME: merge this with generic_calibrate_decr */ void __init pmac_calibrate_decr(void) { diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index 0914b0669b05..a87c66a9652a 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index 8b0686122738..aba89554d89d 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -58,14 +58,6 @@ struct task_struct *last_task_used_math = NULL; struct task_struct *last_task_used_altivec = NULL; #endif -struct mm_struct ioremap_mm = { - .pgd = ioremap_dir, - .mm_users = ATOMIC_INIT(2), - .mm_count = ATOMIC_INIT(1), - .cpu_vm_mask = CPU_MASK_ALL, - .page_table_lock = SPIN_LOCK_UNLOCKED, -}; - /* * Make sure the floating-point register state in the * the thread_struct is up to date for task tsk. @@ -378,9 +370,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->gpr[1] = sp + sizeof(struct pt_regs); p->thread.regs = NULL; /* no user register state */ clear_ti_thread_flag(p->thread_info, TIF_32BIT); -#ifdef CONFIG_PPC_ISERIES - set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT); -#endif } else { childregs->gpr[1] = usp; p->thread.regs = childregs; diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index eb6538b58008..47727a6f7346 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -884,6 +884,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, { char *type = get_flat_dt_prop(node, "device_type", NULL); u32 *prop; + unsigned long size; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) @@ -929,6 +930,17 @@ static int __init early_init_dt_scan_cpus(unsigned long node, cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; } + /* + * Check for an SMT capable CPU and set the CPU feature. We do + * this by looking at the size of the ibm,ppc-interrupt-server#s + * property + */ + prop = (u32 *)get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", + &size); + cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; + if (prop && ((size / sizeof(u32)) > 1)) + cur_cpu_spec->cpu_features |= CPU_FTR_SMT; + return 0; } diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 6f79b7b9b445..e248a7950aeb 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -211,13 +211,23 @@ struct { */ #define ADDR(x) (u32) ((unsigned long)(x) - offset) +/* + * Error results ... some OF calls will return "-1" on error, some + * will return 0, some will return either. To simplify, here are + * macros to use with any ihandle or phandle return value to check if + * it is valid + */ + +#define PROM_ERROR (-1u) +#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) +#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) + + /* This is the one and *ONLY* place where we actually call open * firmware from, since we need to make sure we're running in 32b * mode when we do. We switch back to 64b mode upon return. */ -#define PROM_ERROR (-1) - static int __init call_prom(const char *service, int nargs, int nret, ...) { int i; @@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void) { unsigned long offset = reloc_offset(); ihandle elfloader; - int ret; elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); return; } - ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"), + call_prom("call-method", 3, 1, ADDR("process-elf-header"), elfloader, ADDR(&fake_elf)); call_prom("close", 1, 0, elfloader); } @@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) base = _ALIGN_UP(base + 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; if (align == 0) @@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; } @@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void) { unsigned long offset = reloc_offset(); struct prom_t *_prom = PTRRELOC(&prom); - phandle prom_rtas, rtas_node; + phandle rtas_node; + ihandle rtas_inst; u32 base, entry = 0; u32 size = 0; prom_debug("prom_instantiate_rtas: start...\n"); - prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("prom_rtas: %x\n", prom_rtas); - if (prom_rtas == (phandle) -1) + rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); + prom_debug("rtas_node: %x\n", rtas_node); + if (!PHANDLE_VALID(rtas_node)) return; - prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size)); + prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); if (size == 0) return; @@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void) prom_printf("RTAS allocation failed !\n"); return; } - prom_printf("instantiating rtas at 0x%x", base); - rtas_node = call_prom("open", 1, 1, ADDR("/rtas")); - prom_printf("..."); + rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); + if (!IHANDLE_VALID(rtas_inst)) { + prom_printf("opening rtas package failed"); + return; + } + + prom_printf("instantiating rtas at 0x%x ...", base); if (call_prom("call-method", 3, 2, ADDR("instantiate-rtas"), - rtas_node, base) != PROM_ERROR) { + rtas_inst, base) != PROM_ERROR) { entry = (long)_prom->args.rets[1]; } if (entry == 0) { @@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); + prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void) prom_printf("opening PHB %s", path); phb_node = call_prom("open", 1, 1, path); - if ( (long)phb_node <= 0) + if (phb_node == 0) prom_printf("... failed\n"); else prom_printf("... done\n"); @@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp) /* get a handle for the stdout device */ _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if ((long)_prom->chosen <= 0) + if (!PHANDLE_VALID(_prom->chosen)) prom_panic("cannot find chosen"); /* msg won't be printed :( */ /* get device tree root */ _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if ((long)_prom->root <= 0) + if (!PHANDLE_VALID(_prom->root)) prom_panic("cannot find device tree root"); /* msg won't be printed :( */ } @@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (rtas != (phandle) -1) { - unsigned long x; - x = prom_getproplen(rtas, "ibm,hypertas-functions"); + if (PHANDLE_VALID(rtas)) { + int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; @@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void) * leave some room at the end of the path for appending extra * arguments */ - if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0) + if (call_prom("package-to-path", 3, 1, node, path, + PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; prom_printf("found display : %s, opening ... ", path); ih = call_prom("open", 1, 1, path); - if (ih == (ihandle)0 || ih == (ihandle)-1) { + if (ih == 0) { prom_printf("failed\n"); continue; } @@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str) return 0; } +/* + * The Open Firmware 1275 specification states properties must be 31 bytes or + * less, however not all firmwares obey this. Make it 64 bytes to be safe. + */ +#define MAX_PROPERTY_NAME 64 + static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, unsigned long *mem_end) { @@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* get and store all property names */ prev_name = RELOC(""); for (;;) { - - /* 32 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, 32, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) { + int rc; + + /* 64 is max len of name including nul. */ + namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); + rc = call_prom("nextprop", 3, 1, node, prev_name, namep); + if (rc != 1) { /* No more nodes: unwind alloc */ *mem_start = (unsigned long)namep; break; @@ -1555,18 +1577,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, } } -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long *mem_end) { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1604,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } @@ -1599,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prev_name = RELOC(""); sstart = (char *)RELOC(dt_string_start); for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0) + int rc; + + rc = call_prom("nextprop", 3, 1, node, prev_name, pname); + if (rc != 1) break; /* find string offset */ @@ -1615,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, l = call_prom("getproplen", 2, 1, node, pname); /* sanity checks */ - if (l < 0) + if (l == PROM_ERROR) continue; if (l > MAX_PROPERTY_LENGTH) { prom_printf("WARNING: ignoring large property "); @@ -1763,17 +1790,18 @@ static void __init fixup_device_tree(void) /* Some G5s have a missing interrupt definition, fix it up here */ u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if ((long)u3 <= 0) + if (!PHANDLE_VALID(u3)) return; i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if ((long)i2c <= 0) + if (!PHANDLE_VALID(i2c)) return; mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if ((long)mpic <= 0) + if (!PHANDLE_VALID(mpic)) return; /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0) + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) + == PROM_ERROR) return; if (u3_rev != 0x35) return; @@ -1881,9 +1909,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long &getprop_rval, sizeof(getprop_rval)); /* - * On pSeries, copy the CPU hold code + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + + /* + * On pSeries and BPA, copy the CPU hold code */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c index 9f8c6087ae56..2993f108d96d 100644 --- a/arch/ppc64/kernel/ptrace.c +++ b/arch/ppc64/kernel/ptrace.c @@ -305,6 +305,8 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { + secure_computing(regs->gpr[0]); + if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); @@ -320,8 +322,6 @@ void do_syscall_trace_enter(struct pt_regs *regs) void do_syscall_trace_leave(struct pt_regs *regs) { - secure_computing(regs->gpr[0]); - if (unlikely(current->audit_context)) audit_syscall_exit(current, (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, diff --git a/arch/ppc64/kernel/ras.c b/arch/ppc64/kernel/ras.c index 1c4c796b212b..3c00f7bfc1b5 100644 --- a/arch/ppc64/kernel/ras.c +++ b/arch/ppc64/kernel/ras.c @@ -47,7 +47,6 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/LparData.h> #include <asm/machdep.h> #include <asm/rtas.h> #include <asm/ppcdebug.h> diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/ppc64/kernel/rtas-proc.c index 28b1f1521f21..1f3ff860fdf0 100644 --- a/arch/ppc64/kernel/rtas-proc.c +++ b/arch/ppc64/kernel/rtas-proc.c @@ -371,11 +371,11 @@ static ssize_t ppc_rtas_progress_write(struct file *file, /* Lets see if the user passed hexdigits */ hex = simple_strtoul(progress_led, NULL, 10); - ppc_md.progress ((char *)progress_led, hex); + rtas_progress ((char *)progress_led, hex); return count; /* clear the line */ - /* ppc_md.progress(" ", 0xffff);*/ + /* rtas_progress(" ", 0xffff);*/ } /* ****************************************************************** */ static int ppc_rtas_progress_show(struct seq_file *m, void *v) diff --git a/arch/ppc64/kernel/rtas.c b/arch/ppc64/kernel/rtas.c index 5575603def27..5e8eb33b8e54 100644 --- a/arch/ppc64/kernel/rtas.c +++ b/arch/ppc64/kernel/rtas.c @@ -91,6 +91,123 @@ call_rtas_display_status_delay(unsigned char c) } } +void +rtas_progress(char *s, unsigned short hex) +{ + struct device_node *root; + int width, *p; + char *os; + static int display_character, set_indicator; + static int display_width, display_lines, *row_width, form_feed; + static DEFINE_SPINLOCK(progress_lock); + static int current_line; + static int pending_newline = 0; /* did last write end with unprinted newline? */ + + if (!rtas.base) + return; + + if (display_width == 0) { + display_width = 0x10; + if ((root = find_path_device("/rtas"))) { + if ((p = (unsigned int *)get_property(root, + "ibm,display-line-length", NULL))) + display_width = *p; + if ((p = (unsigned int *)get_property(root, + "ibm,form-feed", NULL))) + form_feed = *p; + if ((p = (unsigned int *)get_property(root, + "ibm,display-number-of-lines", NULL))) + display_lines = *p; + row_width = (unsigned int *)get_property(root, + "ibm,display-truncation-length", NULL); + } + display_character = rtas_token("display-character"); + set_indicator = rtas_token("set-indicator"); + } + + if (display_character == RTAS_UNKNOWN_SERVICE) { + /* use hex display if available */ + if (set_indicator != RTAS_UNKNOWN_SERVICE) + rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); + return; + } + + spin_lock(&progress_lock); + + /* + * Last write ended with newline, but we didn't print it since + * it would just clear the bottom line of output. Print it now + * instead. + * + * If no newline is pending and form feed is supported, clear the + * display with a form feed; otherwise, print a CR to start output + * at the beginning of the line. + */ + if (pending_newline) { + rtas_call(display_character, 1, 1, NULL, '\r'); + rtas_call(display_character, 1, 1, NULL, '\n'); + pending_newline = 0; + } else { + current_line = 0; + if (form_feed) + rtas_call(display_character, 1, 1, NULL, + (char)form_feed); + else + rtas_call(display_character, 1, 1, NULL, '\r'); + } + + if (row_width) + width = row_width[current_line]; + else + width = display_width; + os = s; + while (*os) { + if (*os == '\n' || *os == '\r') { + /* If newline is the last character, save it + * until next call to avoid bumping up the + * display output. + */ + if (*os == '\n' && !os[1]) { + pending_newline = 1; + current_line++; + if (current_line > display_lines-1) + current_line = display_lines-1; + spin_unlock(&progress_lock); + return; + } + + /* RTAS wants CR-LF, not just LF */ + + if (*os == '\n') { + rtas_call(display_character, 1, 1, NULL, '\r'); + rtas_call(display_character, 1, 1, NULL, '\n'); + } else { + /* CR might be used to re-draw a line, so we'll + * leave it alone and not add LF. + */ + rtas_call(display_character, 1, 1, NULL, *os); + } + + if (row_width) + width = row_width[current_line]; + else + width = display_width; + } else { + width--; + rtas_call(display_character, 1, 1, NULL, *os); + } + + os++; + + /* if we overwrite the screen length */ + if (width <= 0) + while ((*os != 0) && (*os != '\n') && (*os != '\r')) + os++; + } + + spin_unlock(&progress_lock); +} + int rtas_token(const char *service) { @@ -425,8 +542,8 @@ rtas_flash_firmware(void) printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - ppc_md.progress("Flashing \n", 0x0); - ppc_md.progress("Please Wait... ", 0x0); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); switch (status) { /* should only get "bad" status */ diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c new file mode 100644 index 000000000000..1048817befb8 --- /dev/null +++ b/arch/ppc64/kernel/rtas_pci.c @@ -0,0 +1,495 @@ +/* + * arch/ppc64/kernel/rtas_pci.c + * + * Copyright (C) 2001 Dave Engebretsen, IBM Corporation + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * + * RTAS specific routines for PCI. + * + * Based on code from pci.c, chrp_pci.c and pSeries_pci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/threads.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/rtas.h> + +#include "mpic.h" +#include "pci.h" + +/* RTAS tokens */ +static int read_pci_config; +static int write_pci_config; +static int ibm_read_pci_config; +static int ibm_write_pci_config; + +static int config_access_valid(struct device_node *dn, int where) +{ + if (where < 256) + return 1; + if (where < 4096 && dn->pci_ext_config_space) + return 1; + + return 0; +} + +static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +{ + int returnval = -1; + unsigned long buid, addr; + int ret; + + if (!dn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(dn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (dn->busno << 16) | + (dn->devfn << 8) | (where & 0xff); + buid = dn->phb->buid; + if (buid) { + ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, + addr, buid >> 32, buid & 0xffffffff, size); + } else { + ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); + } + *val = returnval; + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (returnval == EEH_IO_ERROR_VALUE(size) + && eeh_dn_check_failure (dn, NULL)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 *val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->devfn == devfn) + return rtas_read_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +{ + unsigned long buid, addr; + int ret; + + if (!dn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(dn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (dn->busno << 16) | + (dn->devfn << 8) | (where & 0xff); + buid = dn->phb->buid; + if (buid) { + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + } else { + ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); + } + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->devfn == devfn) + return rtas_write_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops rtas_pci_ops = { + rtas_pci_read_config, + rtas_pci_write_config +}; + +int is_python(struct device_node *dev) +{ + char *model = (char *)get_property(dev, "model", NULL); + + if (model && strstr(model, "Python")) + return 1; + + return 0; +} + +static int get_phb_reg_prop(struct device_node *dev, + unsigned int addr_size_words, + struct reg_property64 *reg) +{ + unsigned int *ui_ptr = NULL, len; + + /* Found a PHB, now figure out where his registers are mapped. */ + ui_ptr = (unsigned int *)get_property(dev, "reg", &len); + if (ui_ptr == NULL) + return 1; + + if (addr_size_words == 1) { + reg->address = ((struct reg_property32 *)ui_ptr)->address; + reg->size = ((struct reg_property32 *)ui_ptr)->size; + } else { + *reg = *((struct reg_property64 *)ui_ptr); + } + + return 0; +} + +static void python_countermeasures(struct device_node *dev, + unsigned int addr_size_words) +{ + struct reg_property64 reg_struct; + void __iomem *chip_regs; + volatile u32 val; + + if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) + return; + + /* Python's register file is 1 MB in size. */ + chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); + + /* + * Firmware doesn't always clear this bit which is critical + * for good performance - Anton + */ + +#define PRG_CL_RESET_VALID 0x00010000 + + val = in_be32(chip_regs + 0xf6030); + if (val & PRG_CL_RESET_VALID) { + printk(KERN_INFO "Python workaround: "); + val &= ~PRG_CL_RESET_VALID; + out_be32(chip_regs + 0xf6030, val); + /* + * We must read it back for changes to + * take effect + */ + val = in_be32(chip_regs + 0xf6030); + printk("reg0: %x\n", val); + } + + iounmap(chip_regs); +} + +void __init init_pci_config_tokens (void) +{ + read_pci_config = rtas_token("read-pci-config"); + write_pci_config = rtas_token("write-pci-config"); + ibm_read_pci_config = rtas_token("ibm,read-pci-config"); + ibm_write_pci_config = rtas_token("ibm,write-pci-config"); +} + +unsigned long __devinit get_phb_buid (struct device_node *phb) +{ + int addr_cells; + unsigned int *buid_vals; + unsigned int len; + unsigned long buid; + + if (ibm_read_pci_config == -1) return 0; + + /* PHB's will always be children of the root node, + * or so it is promised by the current firmware. */ + if (phb->parent == NULL) + return 0; + if (phb->parent->parent) + return 0; + + buid_vals = (unsigned int *) get_property(phb, "reg", &len); + if (buid_vals == NULL) + return 0; + + addr_cells = prom_n_addr_cells(phb); + if (addr_cells == 1) { + buid = (unsigned long) buid_vals[0]; + } else { + buid = (((unsigned long)buid_vals[0]) << 32UL) | + (((unsigned long)buid_vals[1]) & 0xffffffff); + } + return buid; +} + +static int phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) +{ + int *bus_range; + unsigned int len; + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + return 1; + } + + phb->first_busno = bus_range[0]; + phb->last_busno = bus_range[1]; + + return 0; +} + +static int __devinit setup_phb(struct device_node *dev, + struct pci_controller *phb, + unsigned int addr_size_words) +{ + pci_setup_pci_controller(phb); + + if (is_python(dev)) + python_countermeasures(dev, addr_size_words); + + if (phb_set_bus_ranges(dev, phb)) + return 1; + + phb->arch_data = dev; + phb->ops = &rtas_pci_ops; + phb->buid = get_phb_buid(dev); + + return 0; +} + +static void __devinit add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb, + struct property *of_prop) +{ + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(phb->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); + prom_add_property(dev, of_prop); +} + +static struct pci_controller * __init alloc_phb(struct device_node *dev, + unsigned int addr_size_words) +{ + struct pci_controller *phb; + struct property *of_prop; + + phb = alloc_bootmem(sizeof(struct pci_controller)); + if (phb == NULL) + return NULL; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(phb->global_number)); + if (!of_prop) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + add_linux_pci_domain(dev, phb, of_prop); + + return phb; +} + +static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) +{ + struct pci_controller *phb; + + phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), + GFP_KERNEL); + if (phb == NULL) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + phb->is_dynamic = 1; + + /* TODO: linux,pci-domain? */ + + return phb; +} + +unsigned long __init find_and_init_phbs(void) +{ + struct device_node *node; + struct pci_controller *phb; + unsigned int root_size_cells = 0; + unsigned int index; + unsigned int *opprop = NULL; + struct device_node *root = of_find_node_by_path("/"); + + if (ppc64_interrupt_controller == IC_OPEN_PIC) { + opprop = (unsigned int *)get_property(root, + "platform-open-pic", NULL); + } + + root_size_cells = prom_n_size_cells(root); + + index = 0; + + for (node = of_get_next_child(root, NULL); + node != NULL; + node = of_get_next_child(root, node)) { + if (node->type == NULL || strcmp(node->type, "pci") != 0) + continue; + + phb = alloc_phb(node, root_size_cells); + if (!phb) + continue; + + pci_process_bridge_OF_ranges(phb, node); + pci_setup_phb_io(phb, index == 0); +#ifdef CONFIG_PPC_PSERIES + if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { + int addr = root_size_cells * (index + 2) - 1; + mpic_assign_isu(pSeries_mpic, index, opprop[addr]); + } +#endif + index++; + } + + of_node_put(root); + pci_devs_phb_init(); + + /* + * pci_probe_only and pci_assign_all_buses can be set via properties + * in chosen. + */ + if (of_chosen) { + int *prop; + + prop = (int *)get_property(of_chosen, "linux,pci-probe-only", + NULL); + if (prop) + pci_probe_only = *prop; + + prop = (int *)get_property(of_chosen, + "linux,pci-assign-all-buses", NULL); + if (prop) + pci_assign_all_buses = *prop; + } + + return 0; +} + +struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) +{ + struct device_node *root = of_find_node_by_path("/"); + unsigned int root_size_cells = 0; + struct pci_controller *phb; + struct pci_bus *bus; + int primary; + + root_size_cells = prom_n_size_cells(root); + + primary = list_empty(&hose_list); + phb = alloc_phb_dynamic(dn, root_size_cells); + if (!phb) + return NULL; + + pci_process_bridge_OF_ranges(phb, dn); + + pci_setup_phb_io_dynamic(phb, primary); + of_node_put(root); + + pci_devs_phb_init_dynamic(phb); + phb->last_busno = 0xff; + bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); + phb->bus = bus; + phb->last_busno = bus->subordinate; + + return phb; +} +EXPORT_SYMBOL(init_phb_dynamic); + +/* RPA-specific bits for removing PHBs */ +int pcibios_remove_root_bus(struct pci_controller *phb) +{ + struct pci_bus *b = phb->bus; + struct resource *res; + int rc, i; + + res = b->resource[0]; + if (!res->flags) { + printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, + b->name); + return 1; + } + + rc = unmap_bus_range(b); + if (rc) { + printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + if (release_resource(res)) { + printk(KERN_ERR "%s: failed to release IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + for (i = 1; i < 3; ++i) { + res = b->resource[i]; + if (!res->flags && i == 0) { + printk(KERN_ERR "%s: no MEM resource for PHB %s\n", + __FUNCTION__, b->name); + return 1; + } + if (res->flags && release_resource(res)) { + printk(KERN_ERR + "%s: failed to release IO %d on bus %s\n", + __FUNCTION__, i, b->name); + return 1; + } + } + + list_del(&phb->list_node); + if (phb->is_dynamic) + kfree(phb); + + return 0; +} +EXPORT_SYMBOL(pcibios_remove_root_bus); diff --git a/arch/ppc64/kernel/rtasd.c b/arch/ppc64/kernel/rtasd.c index ff65dc33320e..b0c3b829fe47 100644 --- a/arch/ppc64/kernel/rtasd.c +++ b/arch/ppc64/kernel/rtasd.c @@ -440,7 +440,7 @@ static int rtasd(void *unused) goto error; } - printk(KERN_ERR "RTAS daemon started\n"); + printk(KERN_INFO "RTAS daemon started\n"); DEBUG("will sleep for %d jiffies\n", (HZ*60/rtas_event_scan_rate) / 2); @@ -485,7 +485,7 @@ static int __init rtas_init(void) /* No RTAS, only warn if we are on a pSeries box */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { if (systemcfg->platform & PLATFORM_PSERIES) - printk(KERN_ERR "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: no event-scan on system\n"); return 1; } diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index 67989055a9fe..d729fefa0df5 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -42,10 +42,8 @@ #include <asm/time.h> #include <asm/rtas.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/mf.h> #include <asm/machdep.h> -#include <asm/iSeries/ItSpCommArea.h> extern int piranha_simulator; @@ -303,7 +301,7 @@ void iSeries_get_boot_time(struct rtc_time *tm) #ifdef CONFIG_PPC_RTAS #define MAX_RTC_WAIT 5000 /* 5 sec */ #define RTAS_CLOCK_BUSY (-2) -void pSeries_get_boot_time(struct rtc_time *rtc_tm) +void rtas_get_boot_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; @@ -338,7 +336,7 @@ void pSeries_get_boot_time(struct rtc_time *rtc_tm) * and if a delay is needed to read the clock. In this case we just * silently return without updating rtc_tm. */ -void pSeries_get_rtc_time(struct rtc_time *rtc_tm) +void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; @@ -373,7 +371,7 @@ void pSeries_get_rtc_time(struct rtc_time *rtc_tm) rtc_tm->tm_year = ret[0] - 1900; } -int pSeries_set_rtc_time(struct rtc_time *tm) +int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; unsigned long max_wait_tb; diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 21c57f539c29..d5e4866e9ac2 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -41,7 +41,6 @@ #include <asm/smp.h> #include <asm/elf.h> #include <asm/machdep.h> -#include <asm/iSeries/LparData.h> #include <asm/paca.h> #include <asm/ppcdebug.h> #include <asm/time.h> @@ -57,6 +56,8 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> +#include <asm/lmb.h> +#include <asm/iSeries/ItLpNaca.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -103,11 +104,6 @@ extern void unflatten_device_tree(void); extern void smp_release_cpus(void); -unsigned long decr_overclock = 1; -unsigned long decr_overclock_proc0 = 1; -unsigned long decr_overclock_set = 0; -unsigned long decr_overclock_proc0_set = 0; - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -348,6 +344,7 @@ static void __init setup_cpu_maps(void) extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; +extern struct machdep_calls bpa_md; /* Ultimately, stuff them in an elf section like initcalls... */ static struct machdep_calls __initdata *machines[] = { @@ -360,6 +357,9 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ +#ifdef CONFIG_PPC_BPA + &bpa_md, +#endif NULL }; @@ -677,37 +677,52 @@ void __init setup_system(void) DBG(" <- setup_system()\n"); } - -void machine_restart(char *cmd) +/* also used by kexec */ +void machine_shutdown(void) { if (ppc_md.nvram_sync) ppc_md.nvram_sync(); - ppc_md.restart(cmd); } +void machine_restart(char *cmd) +{ + machine_shutdown(); + ppc_md.restart(cmd); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} EXPORT_SYMBOL(machine_restart); - + void machine_power_off(void) { - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); + machine_shutdown(); ppc_md.power_off(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } - EXPORT_SYMBOL(machine_power_off); - + void machine_halt(void) { - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); + machine_shutdown(); ppc_md.halt(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } - EXPORT_SYMBOL(machine_halt); -unsigned long ppc_proc_freq; -unsigned long ppc_tb_freq; - static int ppc64_panic_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -1059,6 +1074,7 @@ void __init setup_arch(char **cmdline_p) /* set up the bootmem stuff with available memory */ do_init_bootmem(); + sparse_init(); /* initialize the syscall map in systemcfg */ setup_syscall_map(); @@ -1083,11 +1099,11 @@ void __init setup_arch(char **cmdline_p) static void ppc64_do_msg(unsigned int src, const char *msg) { if (ppc_md.progress) { - char buf[32]; + char buf[128]; - sprintf(buf, "%08x \n", src); + sprintf(buf, "%08X\n", src); ppc_md.progress(buf, 0); - sprintf(buf, "%-16s", msg); + snprintf(buf, 128, "%s", msg); ppc_md.progress(buf, 0); } } @@ -1120,64 +1136,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg) printk("[dump]%04x %s\n", src, msg); } -int set_spread_lpevents( char * str ) -{ - /* The parameter is the number of processors to share in processing lp events */ - unsigned long i; - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val > 0 ) && ( val <= NR_CPUS ) ) { - for ( i=1; i<val; ++i ) - paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; - printk("lpevent processing spread over %ld processors\n", val); - } - else - printk("invalid spreaqd_lpevents %ld\n", val); - return 1; -} - /* This should only be called on processor 0 during calibrate decr */ -void setup_default_decr(void) +void __init setup_default_decr(void) { struct paca_struct *lpaca = get_paca(); - if ( decr_overclock_set && !decr_overclock_proc0_set ) - decr_overclock_proc0 = decr_overclock; - - lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0; + lpaca->default_decr = tb_ticks_per_jiffy; lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; } -int set_decr_overclock_proc0( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_proc0_set = 1; - decr_overclock_proc0 = val; - printk("proc 0 decrementer overclock factor of %ld\n", val); - } - else - printk("invalid proc 0 decrementer overclock factor of %ld\n", val); - return 1; -} - -int set_decr_overclock( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_set = 1; - decr_overclock = val; - printk("decrementer overclock factor of %ld\n", val); - } - else - printk("invalid decrementer overclock factor of %ld\n", val); - return 1; - -} - -__setup("spread_lpevents=", set_spread_lpevents ); -__setup("decr_overclock_proc0=", set_decr_overclock_proc0 ); -__setup("decr_overclock=", set_decr_overclock ); - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 3b906cd94037..2fcddfcb594d 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -71,7 +71,7 @@ void smp_call_function_interrupt(void); int smt_enabled_at_boot = 1; -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_MPIC void smp_mpic_message_pass(int target, int msg) { /* make sure we're sending something that translates to an IPI */ @@ -128,7 +128,7 @@ void __devinit smp_generic_kick_cpu(int nr) smp_mb(); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_MPIC */ static void __init smp_space_timers(unsigned int max_cpus) { @@ -334,7 +334,6 @@ void smp_call_function_interrupt(void) } } -extern unsigned long decr_overclock; extern struct gettimeofday_struct do_gtod; struct thread_info *current_set[NR_CPUS]; @@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu) if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; - paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock; + paca[cpu].default_decr = tb_ticks_per_jiffy; if (!cpu_has_feature(CPU_FTR_SLB)) { void *tmp; diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/ppc64/kernel/spider-pic.c new file mode 100644 index 000000000000..d5c9a02fb119 --- /dev/null +++ b/arch/ppc64/kernel/spider-pic.c @@ -0,0 +1,191 @@ +/* + * External Interrupt Controller on Spider South Bridge + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/io.h> + +#include "bpa_iic.h" + +/* register layout taken from Spider spec, table 7.4-4 */ +enum { + TIR_DEN = 0x004, /* Detection Enable Register */ + TIR_MSK = 0x084, /* Mask Level Register */ + TIR_EDC = 0x0c0, /* Edge Detection Clear Register */ + TIR_PNDA = 0x100, /* Pending Register A */ + TIR_PNDB = 0x104, /* Pending Register B */ + TIR_CS = 0x144, /* Current Status Register */ + TIR_LCSA = 0x150, /* Level Current Status Register A */ + TIR_LCSB = 0x154, /* Level Current Status Register B */ + TIR_LCSC = 0x158, /* Level Current Status Register C */ + TIR_LCSD = 0x15c, /* Level Current Status Register D */ + TIR_CFGA = 0x200, /* Setting Register A0 */ + TIR_CFGB = 0x204, /* Setting Register B0 */ + /* 0x208 ... 0x3ff Setting Register An/Bn */ + TIR_PPNDA = 0x400, /* Packet Pending Register A */ + TIR_PPNDB = 0x404, /* Packet Pending Register B */ + TIR_PIERA = 0x408, /* Packet Output Error Register A */ + TIR_PIERB = 0x40c, /* Packet Output Error Register B */ + TIR_PIEN = 0x444, /* Packet Output Enable Register */ + TIR_PIPND = 0x454, /* Packet Output Pending Register */ + TIRDID = 0x484, /* Spider Device ID Register */ + REISTIM = 0x500, /* Reissue Command Timeout Time Setting */ + REISTIMEN = 0x504, /* Reissue Command Timeout Setting */ + REISWAITEN = 0x508, /* Reissue Wait Control*/ +}; + +static void __iomem *spider_pics[4]; + +static void __iomem *spider_get_pic(int irq) +{ + int node = irq / IIC_NODE_STRIDE; + irq %= IIC_NODE_STRIDE; + + if (irq >= IIC_EXT_OFFSET && + irq < IIC_EXT_OFFSET + IIC_NUM_EXT && + spider_pics) + return spider_pics[node]; + return NULL; +} + +static int spider_get_nr(unsigned int irq) +{ + return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET; +} + +static void __iomem *spider_get_irq_config(int irq) +{ + void __iomem *pic; + pic = spider_get_pic(irq); + return pic + TIR_CFGA + 8 * spider_get_nr(irq); +} + +static void spider_enable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) | 0x3107000eu); + out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); +} + +static void spider_disable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) & ~0x30000000u); +} + +static unsigned int spider_startup_irq(unsigned int irq) +{ + spider_enable_irq(irq); + return 0; +} + +static void spider_shutdown_irq(unsigned int irq) +{ + spider_disable_irq(irq); +} + +static void spider_end_irq(unsigned int irq) +{ + spider_enable_irq(irq); +} + +static void spider_ack_irq(unsigned int irq) +{ + spider_disable_irq(irq); + iic_local_enable(); +} + +static struct hw_interrupt_type spider_pic = { + .typename = " SPIDER ", + .startup = spider_startup_irq, + .shutdown = spider_shutdown_irq, + .enable = spider_enable_irq, + .disable = spider_disable_irq, + .ack = spider_ack_irq, + .end = spider_end_irq, +}; + + +int spider_get_irq(unsigned long int_pending) +{ + void __iomem *regs = spider_get_pic(int_pending); + unsigned long cs; + int irq; + + cs = in_be32(regs + TIR_CS); + + irq = cs >> 24; + if (irq != 63) + return irq; + + return -1; +} + +void spider_init_IRQ(void) +{ + int node; + struct device_node *dn; + unsigned int *property; + long spiderpic; + int n; + +/* FIXME: detect multiple PICs as soon as the device tree has them */ + for (node = 0; node < 1; node++) { + dn = of_find_node_by_path("/"); + n = prom_n_addr_cells(dn); + property = (unsigned int *) get_property(dn, + "platform-spider-pic", NULL); + + if (!property) + continue; + for (spiderpic = 0; n > 0; --n) + spiderpic = (spiderpic << 32) + *property++; + printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); + spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); + for (n = 0; n < IIC_NUM_EXT; n++) { + int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; + get_irq_desc(irq)->handler = &spider_pic; + + /* do not mask any interrupts because of level */ + out_be32(spider_pics[node] + TIR_MSK, 0x0); + + /* disable edge detection clear */ + /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + + /* enable interrupt packets to be output */ + out_be32(spider_pics[node] + TIR_PIEN, + in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(spider_pics[node] + TIR_DEN, + in_be32(spider_pics[node] +TIR_DEN) | 0x1); + + } + } +} diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 7cf7a9600025..118436e8085a 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -741,6 +741,7 @@ asmlinkage int sys32_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubu asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) { +#ifdef CONFIG_PCI struct pci_controller* hose; struct list_head *ln; struct pci_bus *bus = NULL; @@ -786,36 +787,11 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) case IOBASE_ISA_MEM: return -EINVAL; } - +#endif /* CONFIG_PCI */ return -EOPNOTSUPP; } -asmlinkage int ppc64_newuname(struct new_utsname __user * name) -{ - int errno = sys_newuname(name); - - if (current->personality == PER_LINUX32 && !errno) { - if(copy_to_user(name->machine, "ppc\0\0", 8)) { - errno = -EFAULT; - } - } - return errno; -} - -asmlinkage int ppc64_personality(unsigned long personality) -{ - int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; - return ret; -} - - - /* Note: it is necessary to treat mode as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) @@ -1158,26 +1134,47 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) } #endif +asmlinkage int sys32_uname(struct old_utsname __user * name) +{ + int err = 0; + + down_read(&uts_sem); + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; + up_read(&uts_sem); + if (!err && personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } + return err; +} + asmlinkage int sys32_olduname(struct oldold_utsname __user * name) { int error; - - if (!name) - return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) return -EFAULT; down_read(&uts_sem); error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - error -= __put_user(0,name->sysname+__OLD_UTS_LEN); - error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - error -= __put_user(0,name->nodename+__OLD_UTS_LEN); - error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - error -= __put_user(0,name->release+__OLD_UTS_LEN); - error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - error -= __put_user(0,name->version+__OLD_UTS_LEN); - error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); - error = __put_user(0,name->machine+__OLD_UTS_LEN); + error |= __put_user(0,name->sysname+__OLD_UTS_LEN); + error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); + error |= __put_user(0,name->nodename+__OLD_UTS_LEN); + error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); + error |= __put_user(0,name->release+__OLD_UTS_LEN); + error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); + error |= __put_user(0,name->version+__OLD_UTS_LEN); + error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); + error |= __put_user(0,name->machine+__OLD_UTS_LEN); + if (personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + error |= __put_user(0, name->machine + 3); + error |= __put_user(0, name->machine + 4); + } + up_read(&uts_sem); error = error ? -EFAULT : 0; diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index f2865ff8d2f9..a8cbb202b8cd 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -199,24 +199,33 @@ out: return ret; } -static int __init set_fakeppc(char *str) +long ppc64_personality(unsigned long personality) { - if (*str) - return 0; - init_task.personality = PER_LINUX32; - return 1; + long ret; + + if (personality(current->personality) == PER_LINUX32 + && personality == PER_LINUX) + personality = PER_LINUX32; + ret = sys_personality(personality); + if (ret == PER_LINUX32) + ret = PER_LINUX; + return ret; } -__setup("fakeppc", set_fakeppc); -asmlinkage int sys_uname(struct old_utsname __user * name) +long ppc64_newuname(struct new_utsname __user * name) { - int err = -EFAULT; - + int err = 0; + down_read(&uts_sem); - if (name && !copy_to_user(name, &system_utsname, sizeof (*name))) - err = 0; + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; up_read(&uts_sem); - + if (!err && personality(current->personality) == PER_LINUX32) { + /* change ppc64 to ppc */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } return err; } diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 0925694c3ce5..c8fa6569b2fd 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void) #ifdef CONFIG_PPC_PSERIES unsigned long set, reset; int ret; - unsigned int ctrl; #endif /* CONFIG_PPC_PSERIES */ /* Only need to enable them once */ @@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void) * On SMT machines we have to set the run latch in the ctrl register * in order to make PMC6 spin. */ - if (cpu_has_feature(CPU_FTR_SMT)) { - ctrl = mfspr(CTRLF); - ctrl |= RUNLATCH; - mtspr(CTRLT, ctrl); - } + if (cpu_has_feature(CPU_FTR_SMT)) + ppc64_runlatch_on(); #endif /* CONFIG_PPC_PSERIES */ } diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 3d54745108c7..2348a75e050d 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -107,6 +107,9 @@ void ppc_adjtimex(void); static unsigned adjusting_time = 0; +unsigned long ppc_proc_freq; +unsigned long ppc_tb_freq; + static __inline__ void timer_check_rtc(void) { /* @@ -325,9 +328,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; @@ -474,6 +475,66 @@ int do_settimeofday(struct timespec *tv) EXPORT_SYMBOL(do_settimeofday); +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) +void __init generic_calibrate_decr(void) +{ + struct device_node *cpu; + struct div_result divres; + unsigned int *fp; + int node_found; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + + ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "timebase-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_tb_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + + ppc_proc_freq = DEFAULT_PROC_FREQ; + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "clock-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_proc_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + of_node_put(cpu); + + printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + ppc_tb_freq/1000000, ppc_tb_freq%1000000); + printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", + ppc_proc_freq/1000000, ppc_proc_freq%1000000); + + tb_ticks_per_jiffy = ppc_tb_freq / HZ; + tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; + tb_ticks_per_usec = ppc_tb_freq / 1000000; + tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); + div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); + tb_to_xs = divres.result_low; + + setup_default_decr(); +} +#endif + void __init time_init(void) { /* This function is only called on the boot processor */ diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index 7e52cb2605e0..a8d5e83ee89f 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -126,6 +126,10 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; + case PLATFORM_BPA: + printk("BPA "); + nl = 1; + break; } if (nl) printk("\n"); diff --git a/arch/ppc64/kernel/vio.c b/arch/ppc64/kernel/vio.c index cdd830cb2768..0c0ba71ac0e8 100644 --- a/arch/ppc64/kernel/vio.c +++ b/arch/ppc64/kernel/vio.c @@ -41,20 +41,25 @@ static const struct vio_device_id *vio_match_device( static struct iommu_table *vio_build_iommu_table(struct vio_dev *); static int vio_num_address_cells; #endif -static struct vio_dev *vio_bus_device; /* fake "parent" device */ - #ifdef CONFIG_PPC_ISERIES -static struct vio_dev *__init vio_register_device_iseries(char *type, - uint32_t unit_num); - static struct iommu_table veth_iommu_table; static struct iommu_table vio_iommu_table; - -static struct vio_dev _vio_dev = { +#endif +static struct vio_dev vio_bus_device = { /* fake "parent" device */ + .name = vio_bus_device.dev.bus_id, + .type = "", +#ifdef CONFIG_PPC_ISERIES .iommu_table = &vio_iommu_table, - .dev.bus = &vio_bus_type +#endif + .dev.bus_id = "vio", + .dev.bus = &vio_bus_type, }; -struct device *iSeries_vio_dev = &_vio_dev.dev; + +#ifdef CONFIG_PPC_ISERIES +static struct vio_dev *__init vio_register_device_iseries(char *type, + uint32_t unit_num); + +struct device *iSeries_vio_dev = &vio_bus_device.dev; EXPORT_SYMBOL(iSeries_vio_dev); #define device_is_compatible(a, b) 1 @@ -260,18 +265,10 @@ static int __init vio_bus_init(void) } /* the fake parent of all vio devices, just to give us a nice directory */ - vio_bus_device = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); - if (!vio_bus_device) { - return 1; - } - memset(vio_bus_device, 0, sizeof(struct vio_dev)); - strcpy(vio_bus_device->dev.bus_id, "vio"); - - err = device_register(&vio_bus_device->dev); + err = device_register(&vio_bus_device.dev); if (err) { printk(KERN_WARNING "%s: device_register returned %i\n", __FUNCTION__, err); - kfree(vio_bus_device); return err; } @@ -300,7 +297,7 @@ static void __devinit vio_dev_release(struct device *dev) } #ifdef CONFIG_PPC_PSERIES -static ssize_t viodev_show_devspec(struct device *dev, char *buf) +static ssize_t viodev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct device_node *of_node = dev->platform_data; @@ -309,7 +306,7 @@ static ssize_t viodev_show_devspec(struct device *dev, char *buf) DEVICE_ATTR(devspec, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_devspec, NULL); #endif -static ssize_t viodev_show_name(struct device *dev, char *buf) +static ssize_t viodev_show_name(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf, "%s\n", to_vio_dev(dev)->name); } @@ -326,7 +323,7 @@ static struct vio_dev * __devinit vio_register_device_common( viodev->unit_address = unit_address; viodev->iommu_table = iommu_table; /* init generic 'struct device' fields: */ - viodev->dev.parent = &vio_bus_device->dev; + viodev->dev.parent = &vio_bus_device.dev; viodev->dev.bus = &vio_bus_type; viodev->dev.release = vio_dev_release; @@ -636,5 +633,3 @@ struct bus_type vio_bus_type = { .name = "vio", .match = vio_bus_match, }; - -EXPORT_SYMBOL(vio_bus_type); diff --git a/arch/ppc64/kernel/viopath.c b/arch/ppc64/kernel/viopath.c index 2ed8ee075680..2a6c4f01c45e 100644 --- a/arch/ppc64/kernel/viopath.c +++ b/arch/ppc64/kernel/viopath.c @@ -43,12 +43,10 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/LparData.h> +#include <asm/iSeries/ItExtVpdPanel.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallCfg.h> #include <asm/iSeries/mf.h> -#include <asm/iSeries/iSeries_proc.h> #include <asm/iSeries/vio.h> /* Status of the path to each other partition in the system. @@ -365,7 +363,7 @@ void vio_set_hostlp(void) * while we're active */ viopath_ourLp = HvLpConfig_getLpIndex(); - viopath_hostLp = HvCallCfg_getHostingLpIndex(viopath_ourLp); + viopath_hostLp = HvLpConfig_getHostingLpIndex(viopath_ourLp); if (viopath_hostLp != HvLpIndexInvalid) vio_setHandler(viomajorsubtype_config, handleConfig); @@ -487,7 +485,7 @@ int viopath_open(HvLpIndex remoteLp, int subtype, int numReq) unsigned long flags; int tempNumAllocated; - if ((remoteLp >= HvMaxArchitectedLps) || (remoteLp == HvLpIndexInvalid)) + if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) return -EINVAL; subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; @@ -558,7 +556,7 @@ int viopath_close(HvLpIndex remoteLp, int subtype, int numReq) int numOpen; struct alloc_parms parms; - if ((remoteLp >= HvMaxArchitectedLps) || (remoteLp == HvLpIndexInvalid)) + if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) return -EINVAL; subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c index 879f39b90a33..677c4450984a 100644 --- a/arch/ppc64/kernel/xics.c +++ b/arch/ppc64/kernel/xics.c @@ -647,6 +647,31 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) } } +void xics_teardown_cpu(void) +{ + int cpu = smp_processor_id(); + int status; + + ops->cppr_info(cpu, 0x00); + iosync(); + + /* + * we need to EOI the IPI if we got here from kexec down IPI + * + * xics doesn't care if we duplicate an EOI as long as we + * don't EOI and raise priority. + * + * probably need to check all the other interrupts too + * should we be flagging idle loop instead? + * or creating some task to be scheduled? + */ + ops->xirr_info_set(cpu, XICS_IPI); + + status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); + WARN_ON(status != 0); +} + #ifdef CONFIG_HOTPLUG_CPU /* Interrupts are disabled. */ diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile index bf7b5bbfc04e..76fbfa9f706f 100644 --- a/arch/ppc64/lib/Makefile +++ b/arch/ppc64/lib/Makefile @@ -12,7 +12,7 @@ lib-$(CONFIG_SMP) += locks.o # e2a provides EBCDIC to ASCII conversions. ifdef CONFIG_PPC_ISERIES -obj-$(CONFIG_PCI) += e2a.o +obj-y += e2a.o endif lib-$(CONFIG_DEBUG_KERNEL) += sstep.o diff --git a/arch/ppc64/mm/Makefile b/arch/ppc64/mm/Makefile index ac522d57b2a7..3695d00d347f 100644 --- a/arch/ppc64/mm/Makefile +++ b/arch/ppc64/mm/Makefile @@ -6,6 +6,6 @@ EXTRA_CFLAGS += -mno-minimal-toc obj-y := fault.o init.o imalloc.o hash_utils.o hash_low.o tlb.o \ slb_low.o slb.o stab.o mmap.o -obj-$(CONFIG_DISCONTIGMEM) += numa.o +obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_MULTIPLATFORM) += hash_native.o diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c index 52b6b9305341..4fec05817d66 100644 --- a/arch/ppc64/mm/hash_native.c +++ b/arch/ppc64/mm/hash_native.c @@ -304,6 +304,50 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va, local_irq_restore(flags); } +/* + * clear all mappings on kexec. All cpus are in real mode (or they will + * be when they isi), and we are the only one left. We rely on our kernel + * mapping being 0xC0's and the hardware ignoring those two real bits. + * + * TODO: add batching support when enabled. remember, no dynamic memory here, + * athough there is the control page available... + */ +static void native_hpte_clear(void) +{ + unsigned long slot, slots, flags; + HPTE *hptep = htab_address; + Hpte_dword0 dw0; + unsigned long pteg_count; + + pteg_count = htab_hash_mask + 1; + + local_irq_save(flags); + + /* we take the tlbie lock and hold it. Some hardware will + * deadlock if we try to tlbie from two processors at once. + */ + spin_lock(&native_tlbie_lock); + + slots = pteg_count * HPTES_PER_GROUP; + + for (slot = 0; slot < slots; slot++, hptep++) { + /* + * we could lock the pte here, but we are the only cpu + * running, right? and for crash dump, we probably + * don't want to wait for a maybe bad cpu. + */ + dw0 = hptep->dw0.dw0; + + if (dw0.v) { + hptep->dw0.dword0 = 0; + tlbie(slot2va(dw0.avpn, dw0.l, dw0.h, slot), dw0.l); + } + } + + spin_unlock(&native_tlbie_lock); + local_irq_restore(flags); +} + static void native_flush_hash_range(unsigned long context, unsigned long number, int local) { @@ -415,7 +459,8 @@ void hpte_init_native(void) ppc_md.hpte_updatepp = native_hpte_updatepp; ppc_md.hpte_updateboltedpp = native_hpte_updateboltedpp; ppc_md.hpte_insert = native_hpte_insert; - ppc_md.hpte_remove = native_hpte_remove; + ppc_md.hpte_remove = native_hpte_remove; + ppc_md.hpte_clear_all = native_hpte_clear; if (tlb_batching_enabled()) ppc_md.flush_hash_range = native_flush_hash_range; htab_finish_init(); diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c index 0a0f97008d02..1647b1c6f28e 100644 --- a/arch/ppc64/mm/hash_utils.c +++ b/arch/ppc64/mm/hash_utils.c @@ -195,7 +195,7 @@ void __init htab_initialize(void) memset((void *)table, 0, htab_size_bytes); } - mode_rw = _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX; + mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; /* On U3 based machines, we need to reserve the DART area and * _NOT_ map it to avoid cache paradoxes as it's remapped non @@ -310,10 +310,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) vsid = get_vsid(mm->context.id, ea); break; - case IO_REGION_ID: - mm = &ioremap_mm; - vsid = get_kernel_vsid(ea); - break; case VMALLOC_REGION_ID: mm = &init_mm; vsid = get_kernel_vsid(ea); diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/ppc64/mm/hugetlbpage.c index d3bf86a5c1ad..fdcfe97c75c1 100644 --- a/arch/ppc64/mm/hugetlbpage.c +++ b/arch/ppc64/mm/hugetlbpage.c @@ -121,7 +121,7 @@ static pte_t *hugepte_alloc(struct mm_struct *mm, pud_t *dir, unsigned long addr return hugepte_offset(dir, addr); } -static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pud_t *pud; @@ -134,7 +134,7 @@ static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) return hugepte_offset(pud, addr); } -static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pud_t *pud; @@ -147,25 +147,6 @@ static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return hugepte_alloc(mm, pud, addr); } -static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, - unsigned long addr, struct page *page, - pte_t *ptep, int write_access) -{ - pte_t entry; - - add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); - if (write_access) { - entry = - pte_mkwrite(pte_mkdirty(mk_pte(page, vma->vm_page_prot))); - } else { - entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); - } - entry = pte_mkyoung(entry); - entry = pte_mkhuge(entry); - - set_pte_at(mm, addr, ptep, entry); -} - /* * This function checks for proper alignment of input addr and len parameters. */ @@ -259,80 +240,6 @@ int prepare_hugepage_range(unsigned long addr, unsigned long len) return -EINVAL; } -int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, - struct vm_area_struct *vma) -{ - pte_t *src_pte, *dst_pte, entry; - struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; - int err = -ENOMEM; - - while (addr < end) { - dst_pte = huge_pte_alloc(dst, addr); - if (!dst_pte) - goto out; - - src_pte = huge_pte_offset(src, addr); - entry = *src_pte; - - ptepage = pte_page(entry); - get_page(ptepage); - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - set_pte_at(dst, addr, dst_pte, entry); - - addr += HPAGE_SIZE; - } - - err = 0; - out: - return err; -} - -int -follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, - struct page **pages, struct vm_area_struct **vmas, - unsigned long *position, int *length, int i) -{ - unsigned long vpfn, vaddr = *position; - int remainder = *length; - - WARN_ON(!is_vm_hugetlb_page(vma)); - - vpfn = vaddr/PAGE_SIZE; - while (vaddr < vma->vm_end && remainder) { - if (pages) { - pte_t *pte; - struct page *page; - - pte = huge_pte_offset(mm, vaddr); - - /* hugetlb should be locked, and hence, prefaulted */ - WARN_ON(!pte || pte_none(*pte)); - - page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)]; - - WARN_ON(!PageCompound(page)); - - get_page(page); - pages[i] = page; - } - - if (vmas) - vmas[i] = vma; - - vaddr += PAGE_SIZE; - ++vpfn; - --remainder; - ++i; - } - - *length = remainder; - *position = vaddr; - - return i; -} - struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { @@ -363,89 +270,6 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, return NULL; } -void unmap_hugepage_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned long addr; - pte_t *ptep; - struct page *page; - - WARN_ON(!is_vm_hugetlb_page(vma)); - BUG_ON((start % HPAGE_SIZE) != 0); - BUG_ON((end % HPAGE_SIZE) != 0); - - for (addr = start; addr < end; addr += HPAGE_SIZE) { - pte_t pte; - - ptep = huge_pte_offset(mm, addr); - if (!ptep || pte_none(*ptep)) - continue; - - pte = *ptep; - page = pte_page(pte); - pte_clear(mm, addr, ptep); - - put_page(page); - } - add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT)); - flush_tlb_pending(); -} - -int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) -{ - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - - WARN_ON(!is_vm_hugetlb_page(vma)); - BUG_ON((vma->vm_start % HPAGE_SIZE) != 0); - BUG_ON((vma->vm_end % HPAGE_SIZE) != 0); - - spin_lock(&mm->page_table_lock); - for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { - unsigned long idx; - pte_t *pte = huge_pte_alloc(mm, addr); - struct page *page; - - if (!pte) { - ret = -ENOMEM; - goto out; - } - if (! pte_none(*pte)) - continue; - - idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) - + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); - page = find_get_page(mapping, idx); - if (!page) { - /* charge the fs quota first */ - if (hugetlb_get_quota(mapping)) { - ret = -ENOMEM; - goto out; - } - page = alloc_huge_page(); - if (!page) { - hugetlb_put_quota(mapping); - ret = -ENOMEM; - goto out; - } - ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); - if (! ret) { - unlock_page(page); - } else { - hugetlb_put_quota(mapping); - free_huge_page(page); - goto out; - } - } - set_huge_pte(mm, vma, addr, page, pte, vma->vm_flags & VM_WRITE); - } -out: - spin_unlock(&mm->page_table_lock); - return ret; -} - /* Because we have an exclusive hugepage region which lies within the * normal user address space, we have to take special measures to make * non-huge mmap()s evade the hugepage reserved regions. */ @@ -468,7 +292,12 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, && !is_hugepage_only_range(mm, addr,len)) return addr; } - start_addr = addr = mm->free_area_cache; + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { + start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + } full_search: vma = find_vma(mm, addr); @@ -492,6 +321,8 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; vma = vma->vm_next; } @@ -499,6 +330,7 @@ full_search: /* Make sure we didn't miss any holes */ if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -520,6 +352,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, struct vm_area_struct *vma, *prev_vma; struct mm_struct *mm = current->mm; unsigned long base = mm->mmap_base, addr = addr0; + unsigned long largest_hole = mm->cached_hole_size; int first_time = 1; /* requested length too big for entire address space */ @@ -540,6 +373,10 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } + if (len <= largest_hole) { + largest_hole = 0; + mm->free_area_cache = base; + } try_again: /* make sure it can fit in the remaining address space */ if (mm->free_area_cache < len) @@ -568,13 +405,21 @@ hugepage_recheck: * vma->vm_start, use it: */ if (addr+len <= vma->vm_start && - (!prev_vma || (addr >= prev_vma->vm_end))) + (!prev_vma || (addr >= prev_vma->vm_end))) { /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); - else + mm->cached_hole_size = largest_hole; + return (mm->free_area_cache = addr); + } else { /* pull free_area_cache down to the first hole */ - if (mm->free_area_cache == vma->vm_end) + if (mm->free_area_cache == vma->vm_end) { mm->free_area_cache = vma->vm_start; + mm->cached_hole_size = largest_hole; + } + } + + /* remember the largest hole we saw so far */ + if (addr + largest_hole < vma->vm_start) + largest_hole = vma->vm_start - addr; /* try just below the current vma->vm_start */ addr = vma->vm_start-len; @@ -587,6 +432,7 @@ fail: */ if (first_time) { mm->free_area_cache = base; + largest_hole = 0; first_time = 0; goto try_again; } @@ -597,11 +443,13 @@ fail: * allocations. */ mm->free_area_cache = TASK_UNMAPPED_BASE; + mm->cached_hole_size = ~0UL; addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); /* * Restore the topdown base: */ mm->free_area_cache = base; + mm->cached_hole_size = ~0UL; return addr; } diff --git a/arch/ppc64/mm/imalloc.c b/arch/ppc64/mm/imalloc.c index cb8727f3267a..b6e75b891ac0 100644 --- a/arch/ppc64/mm/imalloc.c +++ b/arch/ppc64/mm/imalloc.c @@ -15,6 +15,7 @@ #include <asm/pgtable.h> #include <asm/semaphore.h> #include <asm/imalloc.h> +#include <asm/cacheflush.h> static DECLARE_MUTEX(imlist_sem); struct vm_struct * imlist = NULL; @@ -285,29 +286,32 @@ struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, return area; } -unsigned long im_free(void * addr) +void im_free(void * addr) { struct vm_struct **p, *tmp; - unsigned long ret_size = 0; if (!addr) - return ret_size; - if ((PAGE_SIZE-1) & (unsigned long) addr) { + return; + if ((unsigned long) addr & ~PAGE_MASK) { printk(KERN_ERR "Trying to %s bad address (%p)\n", __FUNCTION__, addr); - return ret_size; + return; } down(&imlist_sem); for (p = &imlist ; (tmp = *p) ; p = &tmp->next) { if (tmp->addr == addr) { - ret_size = tmp->size; *p = tmp->next; + + /* XXX: do we need the lock? */ + spin_lock(&init_mm.page_table_lock); + unmap_vm_area(tmp); + spin_unlock(&init_mm.page_table_lock); + kfree(tmp); up(&imlist_sem); - return ret_size; + return; } } up(&imlist_sem); printk(KERN_ERR "Trying to %s nonexistent area (%p)\n", __FUNCTION__, addr); - return ret_size; } diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index 4b42aff74d73..b50b3a446dbe 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -73,9 +73,6 @@ static unsigned long phbs_io_bot = PHBS_IO_BASE; extern pgd_t swapper_pg_dir[]; extern struct task_struct *current_set[NR_CPUS]; -extern pgd_t ioremap_dir[]; -pgd_t * ioremap_pgd = (pgd_t *)&ioremap_dir; - unsigned long klimit = (unsigned long)_end; unsigned long _SDR1=0; @@ -101,7 +98,7 @@ void show_mem(void) printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { - page = pgdat->node_mem_map + i; + page = pgdat_page_nr(pgdat, i); total++; if (PageReserved(page)) reserved++; @@ -137,69 +134,6 @@ void iounmap(volatile void __iomem *addr) #else -static void unmap_im_area_pte(pmd_t *pmd, unsigned long addr, - unsigned long end) -{ - pte_t *pte; - - pte = pte_offset_kernel(pmd, addr); - do { - pte_t ptent = ptep_get_and_clear(&ioremap_mm, addr, pte); - WARN_ON(!pte_none(ptent) && !pte_present(ptent)); - } while (pte++, addr += PAGE_SIZE, addr != end); -} - -static inline void unmap_im_area_pmd(pud_t *pud, unsigned long addr, - unsigned long end) -{ - pmd_t *pmd; - unsigned long next; - - pmd = pmd_offset(pud, addr); - do { - next = pmd_addr_end(addr, end); - if (pmd_none_or_clear_bad(pmd)) - continue; - unmap_im_area_pte(pmd, addr, next); - } while (pmd++, addr = next, addr != end); -} - -static inline void unmap_im_area_pud(pgd_t *pgd, unsigned long addr, - unsigned long end) -{ - pud_t *pud; - unsigned long next; - - pud = pud_offset(pgd, addr); - do { - next = pud_addr_end(addr, end); - if (pud_none_or_clear_bad(pud)) - continue; - unmap_im_area_pmd(pud, addr, next); - } while (pud++, addr = next, addr != end); -} - -static void unmap_im_area(unsigned long addr, unsigned long end) -{ - struct mm_struct *mm = &ioremap_mm; - unsigned long next; - pgd_t *pgd; - - spin_lock(&mm->page_table_lock); - - pgd = pgd_offset_i(addr); - flush_cache_vunmap(addr, end); - do { - next = pgd_addr_end(addr, end); - if (pgd_none_or_clear_bad(pgd)) - continue; - unmap_im_area_pud(pgd, addr, next); - } while (pgd++, addr = next, addr != end); - flush_tlb_kernel_range(start, end); - - spin_unlock(&mm->page_table_lock); -} - /* * map_io_page currently only called by __ioremap * map_io_page adds an entry to the ioremap page table @@ -214,21 +148,21 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) unsigned long vsid; if (mem_init_done) { - spin_lock(&ioremap_mm.page_table_lock); - pgdp = pgd_offset_i(ea); - pudp = pud_alloc(&ioremap_mm, pgdp, ea); + spin_lock(&init_mm.page_table_lock); + pgdp = pgd_offset_k(ea); + pudp = pud_alloc(&init_mm, pgdp, ea); if (!pudp) return -ENOMEM; - pmdp = pmd_alloc(&ioremap_mm, pudp, ea); + pmdp = pmd_alloc(&init_mm, pudp, ea); if (!pmdp) return -ENOMEM; - ptep = pte_alloc_kernel(&ioremap_mm, pmdp, ea); + ptep = pte_alloc_kernel(&init_mm, pmdp, ea); if (!ptep) return -ENOMEM; pa = abs_to_phys(pa); - set_pte_at(&ioremap_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, + set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); - spin_unlock(&ioremap_mm.page_table_lock); + spin_unlock(&init_mm.page_table_lock); } else { unsigned long va, vpn, hash, hpteg; @@ -267,13 +201,9 @@ static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa, for (i = 0; i < size; i += PAGE_SIZE) if (map_io_page(ea+i, pa+i, flags)) - goto failure; + return NULL; return (void __iomem *) (ea + (addr & ~PAGE_MASK)); - failure: - if (mem_init_done) - unmap_im_area(ea, ea + size); - return NULL; } @@ -381,19 +311,14 @@ int __ioremap_explicit(unsigned long pa, unsigned long ea, */ void iounmap(volatile void __iomem *token) { - unsigned long address, size; void *addr; if (!mem_init_done) return; addr = (void *) ((unsigned long __force) token & PAGE_MASK); - - if ((size = im_free(addr)) == 0) - return; - address = (unsigned long)addr; - unmap_im_area(address, address + size); + im_free(addr); } static int iounmap_subset_regions(unsigned long addr, unsigned long size) @@ -606,7 +531,7 @@ EXPORT_SYMBOL(page_is_ram); * Initialize the bootmem system and give it all the memory we * have available. */ -#ifndef CONFIG_DISCONTIGMEM +#ifndef CONFIG_NEED_MULTIPLE_NODES void __init do_init_bootmem(void) { unsigned long i; @@ -628,12 +553,20 @@ void __init do_init_bootmem(void) max_pfn = max_low_pfn; - /* add all physical memory to the bootmem map. Also find the first */ + /* Add all physical memory to the bootmem map, mark each area + * present. + */ for (i=0; i < lmb.memory.cnt; i++) { unsigned long physbase, size; + unsigned long start_pfn, end_pfn; physbase = lmb.memory.region[i].physbase; size = lmb.memory.region[i].size; + + start_pfn = physbase >> PAGE_SHIFT; + end_pfn = start_pfn + (size >> PAGE_SHIFT); + memory_present(0, start_pfn, end_pfn); + free_bootmem(physbase, size); } @@ -672,7 +605,7 @@ void __init paging_init(void) free_area_init_node(0, NODE_DATA(0), zones_size, __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); } -#endif /* CONFIG_DISCONTIGMEM */ +#endif /* ! CONFIG_NEED_MULTIPLE_NODES */ static struct kcore_list kcore_vmem; @@ -703,7 +636,7 @@ module_init(setup_kcore); void __init mem_init(void) { -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NEED_MULTIPLE_NODES int nid; #endif pg_data_t *pgdat; @@ -714,7 +647,7 @@ void __init mem_init(void) num_physpages = max_low_pfn; /* RAM is assumed contiguous */ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NEED_MULTIPLE_NODES for_each_online_node(nid) { if (NODE_DATA(nid)->node_spanned_pages != 0) { printk("freeing bootmem node %x\n", nid); @@ -729,7 +662,7 @@ void __init mem_init(void) for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { - page = pgdat->node_mem_map + i; + page = pgdat_page_nr(pgdat, i); if (PageReserved(page)) reservedpages++; } diff --git a/arch/ppc64/mm/numa.c b/arch/ppc64/mm/numa.c index ea862ec643d3..cafd91aef289 100644 --- a/arch/ppc64/mm/numa.c +++ b/arch/ppc64/mm/numa.c @@ -440,6 +440,8 @@ new_range: for (i = start ; i < (start+size); i += MEMORY_INCREMENT) numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = numa_domain; + memory_present(numa_domain, start >> PAGE_SHIFT, + (start + size) >> PAGE_SHIFT); if (--ranges) goto new_range; @@ -481,6 +483,7 @@ static void __init setup_nonnuma(void) for (i = 0 ; i < top_of_ram; i += MEMORY_INCREMENT) numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = 0; + memory_present(0, 0, init_node_data[0].node_end_pfn); } static void __init dump_numa_topology(void) diff --git a/arch/ppc64/xmon/xmon.c b/arch/ppc64/xmon/xmon.c index 3c0ccb2623ae..7f6e13a4b71e 100644 --- a/arch/ppc64/xmon/xmon.c +++ b/arch/ppc64/xmon/xmon.c @@ -2247,7 +2247,14 @@ scanhex(unsigned long *vp) tmpstr[i] = c; } tmpstr[i++] = 0; - *vp = kallsyms_lookup_name(tmpstr); + *vp = 0; + if (setjmp(bus_error_jmp) == 0) { + catch_memory_errors = 1; + sync(); + *vp = kallsyms_lookup_name(tmpstr); + sync(); + } + catch_memory_errors = 0; if (!(*vp)) { printf("unknown symbol '%s'\n", tmpstr); return 0; |