diff options
Diffstat (limited to 'arch/sh/boards/hp6xx')
| -rw-r--r-- | arch/sh/boards/hp6xx/Makefile | 5 | ||||
| -rw-r--r-- | arch/sh/boards/hp6xx/hp6xx_apm.c | 123 | ||||
| -rw-r--r-- | arch/sh/boards/hp6xx/pm.c | 88 | ||||
| -rw-r--r-- | arch/sh/boards/hp6xx/pm_wakeup.S | 58 | ||||
| -rw-r--r-- | arch/sh/boards/hp6xx/setup.c | 62 |
5 files changed, 326 insertions, 10 deletions
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile index 927fe0aa5dfa..ff1b7f5b4e91 100644 --- a/arch/sh/boards/hp6xx/Makefile +++ b/arch/sh/boards/hp6xx/Makefile @@ -2,5 +2,6 @@ # Makefile for the HP6xx specific parts of the kernel # -obj-y := mach.o setup.o - +obj-y := setup.o +obj-$(CONFIG_PM) += pm.o pm_wakeup.o +obj-$(CONFIG_APM) += hp6xx_apm.o diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c new file mode 100644 index 000000000000..ad0e712c29f6 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -0,0 +1,123 @@ +/* + * bios-less APM driver for hp680 + * + * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/apm_bios.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/io.h> +#include <asm/apm.h> +#include <asm/adc.h> +#include <asm/hp6xx/hp6xx.h> + +#define SH7709_PGDR 0xa400012c + +#define APM_CRITICAL 10 +#define APM_LOW 30 + +#define HP680_BATTERY_MAX 875 +#define HP680_BATTERY_MIN 600 +#define HP680_BATTERY_AC_ON 900 + +#define MODNAME "hp6x0_apm" + +static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length) +{ + u8 pgdr; + char *p; + int battery_status; + int battery_flag; + int ac_line_status; + int time_units = APM_BATTERY_LIFE_UNKNOWN; + + int battery = adc_single(ADC_CHANNEL_BATTERY); + int backup = adc_single(ADC_CHANNEL_BACKUP); + int charging = adc_single(ADC_CHANNEL_CHARGE); + int percentage; + + percentage = 100 * (battery - HP680_BATTERY_MIN) / + (HP680_BATTERY_MAX - HP680_BATTERY_MIN); + + ac_line_status = (battery > HP680_BATTERY_AC_ON) ? + APM_AC_ONLINE : APM_AC_OFFLINE; + + p = buf; + + pgdr = ctrl_inb(SH7709_PGDR); + if (pgdr & PGDR_MAIN_BATTERY_OUT) { + battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + battery_flag = 0x80; + percentage = -1; + } else if (charging < 8 ) { + battery_status = APM_BATTERY_STATUS_CHARGING; + battery_flag = 0x08; + ac_line_status = 0xff; + } else if (percentage <= APM_CRITICAL) { + battery_status = APM_BATTERY_STATUS_CRITICAL; + battery_flag = 0x04; + } else if (percentage <= APM_LOW) { + battery_status = APM_BATTERY_STATUS_LOW; + battery_flag = 0x02; + } else { + battery_status = APM_BATTERY_STATUS_HIGH; + battery_flag = 0x01; + } + + p += sprintf(p, "1.0 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", + APM_32_BIT_SUPPORT, + ac_line_status, + battery_status, + battery_flag, + percentage, + time_units, + "min"); + p += sprintf(p, "bat=%d backup=%d charge=%d\n", + battery, backup, charging); + + return p - buf; +} + +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + if (!apm_suspended) + apm_queue_event(APM_USER_SUSPEND); + + return IRQ_HANDLED; +} + +static int __init hp6x0_apm_init(void) +{ + int ret; + + ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, + SA_INTERRUPT, MODNAME, 0); + if (unlikely(ret < 0)) { + printk(KERN_ERR MODNAME ": IRQ %d request failed\n", + HP680_BTN_IRQ); + return ret; + } + + apm_get_info = hp6x0_apm_get_info; + + return ret; +} + +static void __exit hp6x0_apm_exit(void) +{ + free_irq(HP680_BTN_IRQ, 0); + apm_get_info = 0; +} + +module_init(hp6x0_apm_init); +module_exit(hp6x0_apm_exit); + +MODULE_AUTHOR("Adriy Skulysh"); +MODULE_DESCRIPTION("hp6xx Advanced Power Management"); +MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c new file mode 100644 index 000000000000..0e501bcbd7a9 --- /dev/null +++ b/arch/sh/boards/hp6xx/pm.c @@ -0,0 +1,88 @@ +/* + * hp6x0 Power Management Routines + * + * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <asm/io.h> +#include <asm/hd64461.h> +#include <asm/hp6xx/hp6xx.h> +#include <asm/cpu/dac.h> +#include <asm/pm.h> + +#define STBCR 0xffffff82 +#define STBCR2 0xffffff88 + +static int hp6x0_pm_enter(suspend_state_t state) +{ + u8 stbcr, stbcr2; +#ifdef CONFIG_HD64461_ENABLER + u8 scr; + u16 hd64461_stbcr; +#endif + + if (state != PM_SUSPEND_MEM) + return -EINVAL; + +#ifdef CONFIG_HD64461_ENABLER + outb(0, HD64461_PCC1CSCIER); + + scr = inb(HD64461_PCC1SCR); + scr |= HD64461_PCCSCR_VCC1; + outb(scr, HD64461_PCC1SCR); + + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr |= HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); +#endif + + ctrl_outb(0x1f, DACR); + + stbcr = ctrl_inb(STBCR); + ctrl_outb(0x01, STBCR); + + stbcr2 = ctrl_inb(STBCR2); + ctrl_outb(0x7f , STBCR2); + + outw(0xf07f, HD64461_SCPUCR); + + pm_enter(); + + outw(0, HD64461_SCPUCR); + ctrl_outb(stbcr, STBCR); + ctrl_outb(stbcr2, STBCR2); + +#ifdef CONFIG_HD64461_ENABLER + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr &= ~HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); + + outb(0x4c, HD64461_PCC1CSCIER); + outb(0x00, HD64461_PCC1CSCR); +#endif + + return 0; +} + +/* + * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. + */ +static struct pm_ops hp6x0_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .enter = hp6x0_pm_enter, +}; + +static int __init hp6x0_pm_init(void) +{ + pm_set_ops(&hp6x0_pm_ops); + return 0; +} + +late_initcall(hp6x0_pm_init); diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S new file mode 100644 index 000000000000..45e9bf0b9115 --- /dev/null +++ b/arch/sh/boards/hp6xx/pm_wakeup.S @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <linux/linkage.h> +#include <asm/cpu/mmu_context.h> + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +/* + * Kernel mode register usage: + * k0 scratch + * k1 scratch + * k2 scratch (Exception code) + * k3 scratch (Return address) + * k4 scratch + * k5 reserved + * k6 Global Interrupt Mask (0--15 << 4) + * k7 CURRENT_THREAD_INFO (pointer to current thread info) + */ + +ENTRY(wakeup_start) +! clear STBY bit + mov #-126, k2 + and #127, k0 + mov.b k0, @k2 +! enable refresh + mov.l 5f, k1 + mov.w 6f, k0 + mov.w k0, @k1 +! jump to handler + mov.l 2f, k2 + mov.l 3f, k3 + mov.l @k2, k2 + + mov.l 4f, k1 + jmp @k1 + nop + + .align 2 +1: .long EXPEVT +2: .long INTEVT +3: .long ret_from_irq +4: .long handle_exception +5: .long 0xffffff68 +6: .word 0x0524 + +ENTRY(wakeup_end) + nop diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 71f315663cc9..60ab17ad6054 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -8,22 +8,22 @@ * * Setup code for an HP680 (internal peripherials only) */ - +#include <linux/types.h> #include <linux/init.h> -#include <asm/io.h> #include <asm/hd64461.h> +#include <asm/io.h> +#include <asm/irq.h> #include <asm/hp6xx/hp6xx.h> #include <asm/cpu/dac.h> -const char *get_system_type(void) -{ - return "HP6xx"; -} +#define SCPCR 0xa4000116 +#define SCPDR 0xa4000136 -int __init platform_setup(void) +static void __init hp6xx_setup(char **cmdline_p) { u8 v8; u16 v; + v = inw(HD64461_STBCR); v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | @@ -50,5 +50,51 @@ int __init platform_setup(void) v8 &= ~DACR_DAE; ctrl_outb(v8,DACR); - return 0; + v8 = ctrl_inb(SCPDR); + v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; + v8 &= ~SCPDR_TS_SCAN_ENABLE; + ctrl_outb(v8, SCPDR); + + v = ctrl_inw(SCPCR); + v &= ~SCPCR_TS_MASK; + v |= SCPCR_TS_ENABLE; + ctrl_outw(v, SCPCR); } + +/* + * XXX: This is stupid, we should have a generic machine vector for the cchips + * and just wrap the platform setup code in to this, as it's the only thing + * that ends up being different. + */ +struct sh_machine_vector mv_hp6xx __initmv = { + .mv_name = "hp6xx", + .mv_setup = hp6xx_setup, + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, + + .mv_inb = hd64461_inb, + .mv_inw = hd64461_inw, + .mv_inl = hd64461_inl, + .mv_outb = hd64461_outb, + .mv_outw = hd64461_outw, + .mv_outl = hd64461_outl, + + .mv_inb_p = hd64461_inb_p, + .mv_inw_p = hd64461_inw, + .mv_inl_p = hd64461_inl, + .mv_outb_p = hd64461_outb_p, + .mv_outw_p = hd64461_outw, + .mv_outl_p = hd64461_outl, + + .mv_insb = hd64461_insb, + .mv_insw = hd64461_insw, + .mv_insl = hd64461_insl, + .mv_outsb = hd64461_outsb, + .mv_outsw = hd64461_outsw, + .mv_outsl = hd64461_outsl, + + .mv_readw = hd64461_readw, + .mv_writew = hd64461_writew, + + .mv_irq_demux = hd64461_irq_demux, +}; +ALIAS_MV(hp6xx) |