diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 125 |
1 files changed, 108 insertions, 17 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 4158d70c0dea..64559e8af14b 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> @@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev) return gpio_get_value(GPIO_PTB3); } +static void usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); +} + static struct renesas_usbhs_platform_info usbhs_info = { .platform_callback = { .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, }, .driver_param = { .buswait_bwait = 4, @@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +static struct regulator_consumer_supply cn12_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; + static void sdhi0_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB6, NULL); + if (!ret) { + power_gpio = GPIO_PTB6; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB6, state); } @@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) +static void cn12_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB7, NULL); + if (!ret) { + power_gpio = GPIO_PTB7; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB7, state); } +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static int sdhi1_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PTW7); @@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .set_pwr = sdhi1_set_pwr, + .set_pwr = cn12_set_pwr, .get_cd = sdhi1_get_cd, }; @@ -899,14 +999,9 @@ static struct platform_device vou_device = { #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SH_MMCIF */ -static void mmcif_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - static void mmcif_down_pwr(struct platform_device *pdev) { - gpio_set_value(GPIO_PTB7, 0); + cn12_set_pwr(pdev, 0); } static struct resource sh_mmcif_resources[] = { @@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_plat_data sh_mmcif_plat = { - .set_pwr = mmcif_set_pwr, + .set_pwr = cn12_set_pwr, .down_pwr = mmcif_down_pwr, .sup_pclk = 0, /* SH7724: Max Pclk/2 */ .caps = MMC_CAP_4_BIT_DATA | @@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -1258,8 +1355,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1288,8 +1383,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); cn12_enabled = true; #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1301,8 +1394,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); /* Card-detect, used on CN12 with SDHI1 */ gpio_request(GPIO_PTW7, NULL); |