diff options
Diffstat (limited to 'arch/sh')
56 files changed, 1889 insertions, 1356 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6a679c3e15e8..9a854c8e5274 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -281,7 +281,6 @@ config CPU_SUBTYPE_SH7723 select CPU_SH4A select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_NUMA help Select SH7723 if you have an SH-MobileR2 CPU. @@ -448,14 +447,6 @@ config SH_DREAMCAST Select Dreamcast if configuring for a SEGA Dreamcast. More information at <http://www.linux-sh.org> -config SH_MPC1211 - bool "Interface MPC1211" - depends on CPU_SUBTYPE_SH7751 && BROKEN - help - CTP/PCI-SH02 is a CPU module computer that is produced - by Interface Corporation. - More information at <http://www.interface.co.jp> - config SH_SH03 bool "Interface CTP/PCI-SH03" depends on CPU_SUBTYPE_SH7751 @@ -657,8 +648,7 @@ source "arch/sh/drivers/Kconfig" endmenu config ISA_DMA_API - def_bool y - depends on SH_MPC1211 + bool menu "Kernel features" @@ -666,7 +656,7 @@ source kernel/Kconfig.hz config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on SUPERH32 && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -683,7 +673,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on SUPERH32 && EXPERIMENTAL help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels @@ -763,7 +753,7 @@ menu "Boot options" config ZERO_PAGE_OFFSET hex "Zero page offset" - default "0x00004000" if SH_MPC1211 || SH_SH03 + default "0x00004000" if SH_SH03 default "0x00010000" if PAGE_SIZE_64KB default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index d9d28f9dd0db..0f4549860226 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -7,6 +7,7 @@ source "lib/Kconfig.debug" config SH_STANDARD_BIOS bool "Use LinuxSH standard BIOS" + depends on SUPERH32 help Say Y here if your target has the gdb-sh-stub package from www.m17n.org (or any conforming standard LinuxSH BIOS) @@ -80,7 +81,7 @@ config DEBUG_STACK_USAGE config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && (MMU || BROKEN) help If you say Y here the kernel will use a 4Kb stacksize for the kernel stack attached to each process/thread. This facilitates diff --git a/arch/sh/Makefile b/arch/sh/Makefile index bb06f83e6239..fb7b1b15e392 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -41,6 +41,8 @@ cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml +cflags-y += $(call cc-option,-mno-fdpic) + # # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that # support it, while -Wa,-dsp by itself limits the range of usable opcodes @@ -110,7 +112,6 @@ machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 machdir-$(CONFIG_SH_HP6XX) += hp6xx machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_MPC1211) += mpc1211 machdir-$(CONFIG_SH_SH03) += sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile deleted file mode 100644 index 8cd31b5d200b..000000000000 --- a/arch/sh/boards/mpc1211/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel -# - -obj-y := setup.o rtc.o - -obj-$(CONFIG_PCI) += pci.o - diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c deleted file mode 100644 index 23849f70f133..000000000000 --- a/arch/sh/boards/mpc1211/pci.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) - * - * (c) 2002-2003 Saito.K & Jeanne - * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares <mj@ucw.cz> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/mpc1211/pci.h> - -static struct resource mpcpci_io_resource = { - "MPCPCI IO", - 0x00000000, - 0xffffffff, - IORESOURCE_IO -}; - -static struct resource mpcpci_mem_resource = { - "MPCPCI mem", - 0x00000000, - 0xffffffff, - IORESOURCE_MEM -}; - -static struct pci_ops pci_direct_conf1; -struct pci_channel board_pci_channels[] = { - {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, - {NULL, NULL, NULL, 0, 0}, -}; - -/* - * Direct access to PCI hardware... - */ - - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) -{ - u32 word; - unsigned long flags; - - /* - * PCIPDR may only be accessed as 32 bit words, - * so we must do byte alignment by hand - */ - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,where), PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - - switch (size) { - case 1: - switch (where & 0x3) { - case 3: - *value = (u8)(word >> 24); - break; - case 2: - *value = (u8)(word >> 16); - break; - case 1: - *value = (u8)(word >> 8); - break; - default: - *value = (u8)word; - break; - } - break; - case 2: - switch (where & 0x3) { - case 3: - *value = (u16)(word >> 24); - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - *value |= ((word & 0xff) << 8); - break; - case 2: - *value = (u16)(word >> 16); - break; - case 1: - *value = (u16)(word >> 8); - break; - default: - *value = (u16)word; - break; - } - break; - case 4: - *value = word; - break; - } - PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); - return PCIBIOS_SUCCESSFUL; -} - -/* - * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation. - * We'll allow an odd byte offset, though it should be illegal. - */ -static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -{ - u32 word,mask = 0; - unsigned long flags; - u32 shift = (where & 3) * 8; - - if(size == 1) { - mask = ((1 << 8) - 1) << shift; // create the byte mask - } else if(size == 2){ - if(shift == 24) - return PCIBIOS_BAD_REGISTER_NUMBER; - mask = ((1 << 16) - 1) << shift; // create the word mask - } - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,where), PCIPAR); - if(size == 4){ - writel(value, PCIPDR); - local_irq_restore(flags); - PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); - return PCIBIOS_SUCCESSFUL; - } - word = readl(PCIPDR); - word &= ~mask; - word |= ((value << shift) & mask); - writel(word, PCIPDR); - local_irq_restore(flags); - PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); - return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -static struct pci_ops pci_direct_conf1 = { - .read = pci_conf1_read, - .write = pci_conf1_write, -}; - -static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) -{ - dev->resource[0].start = 0x1f0; - dev->resource[0].end = 0x1f7; - dev->resource[0].flags = IORESOURCE_IO; - dev->resource[1].start = 0x3f6; - dev->resource[1].end = 0x3f6; - dev->resource[1].flags = IORESOURCE_IO; - dev->resource[2].start = 0x170; - dev->resource[2].end = 0x177; - dev->resource[2].flags = IORESOURCE_IO; - dev->resource[3].start = 0x376; - dev->resource[3].end = 0x376; - dev->resource[3].flags = IORESOURCE_IO; - dev->resource[4].start = 0xf000; - dev->resource[4].end = 0xf00f; - dev->resource[4].flags = IORESOURCE_IO; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void __devinit pcibios_fixup_bus(struct pci_bus *b) -{ - pci_read_bridge_bases(b); -} - -/* - * IRQ functions - */ -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin-1) + slot) % 4) + 1; -} - -static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) -{ - return (((pin-1) - slot) & 3) + 1; -} - -static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) -{ - unsigned long flags; - u8 pin = *pinp; - u32 word; - - for ( ; dev->bus->self; dev = dev->bus->self) { - if (!pin) - continue; - - if (dev->bus->number == 1) { - local_irq_save(flags); - writel(0x80000000 | 0x2c, PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - word >>= 16; - - if (word == 0x0001) - pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); - else - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - } else - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - } - - *pinp = pin; - - return PCI_SLOT(dev->devfn); -} - -static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - if (dev->bus->number == 0) { - switch (slot) { - case 13: irq = 9; break; /* USB */ - case 22: irq = 10; break; /* LAN */ - default: irq = 0; break; - } - } else { - switch (pin) { - case 0: irq = 0; break; - case 1: irq = 7; break; - case 2: irq = 9; break; - case 3: irq = 10; break; - case 4: irq = 11; break; - } - } - - if( irq < 0 ) { - PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); -} - -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start >= 0x10000UL) { - if ((start & 0xffffUL) < 0x4000UL) { - start = (start & 0xffff0000UL) + 0x4000UL; - } else if ((start & 0xffffUL) >= 0xf000UL) { - start = (start & 0xffff0000UL) + 0x10000UL; - } - res->start = start; - } else { - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } - } -} - diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c deleted file mode 100644 index 03b123a4bba4..000000000000 --- a/arch/sh/boards/mpc1211/rtc.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support - * - * Copyright (C) 2002 Saito.K & Jeanne - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/bcd.h> -#include <linux/mc146818rtc.h> - -unsigned long get_cmos_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - - spin_lock(&rtc_lock); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - } while (sec != CMOS_READ(RTC_SECONDS)); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - - spin_unlock(&rtc_lock); - - year += 1900; - if (year < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); -} - -void mpc1211_rtc_gettimeofday(struct timeval *tv) -{ - - tv->tv_sec = get_cmos_time(); - tv->tv_usec = 0; -} - -/* arc/i386/kernel/time.c */ -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -static int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - - /* gets recalled with irq locally disabled */ - spin_lock(&rtc_lock); - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - } - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - spin_unlock(&rtc_lock); - - return retval; -} - -int mpc1211_rtc_settimeofday(const struct timeval *tv) -{ - unsigned long nowtime = tv->tv_sec; - - return set_rtc_mmss(nowtime); -} - -void mpc1211_time_init(void) -{ - rtc_sh_get_time = mpc1211_rtc_gettimeofday; - rtc_sh_set_time = mpc1211_rtc_settimeofday; -} - diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c deleted file mode 100644 index fede36361dc7..000000000000 --- a/arch/sh/boards/mpc1211/setup.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/setup.c - * - * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <asm/io.h> -#include <asm/machvec.h> -#include <asm/mpc1211/mpc1211.h> -#include <asm/mpc1211/pci.h> -#include <asm/mpc1211/m1543c.h> - -/* ALI15X3 SMBus address offsets */ -#define SMBHSTSTS (0 + 0x3100) -#define SMBHSTCNT (1 + 0x3100) -#define SMBHSTSTART (2 + 0x3100) -#define SMBHSTCMD (7 + 0x3100) -#define SMBHSTADD (3 + 0x3100) -#define SMBHSTDAT0 (4 + 0x3100) -#define SMBHSTDAT1 (5 + 0x3100) -#define SMBBLKDAT (6 + 0x3100) - -/* Other settings */ -#define MAX_TIMEOUT 500 /* times 1/100 sec */ - -/* ALI15X3 command constants */ -#define ALI15X3_ABORT 0x04 -#define ALI15X3_T_OUT 0x08 -#define ALI15X3_QUICK 0x00 -#define ALI15X3_BYTE 0x10 -#define ALI15X3_BYTE_DATA 0x20 -#define ALI15X3_WORD_DATA 0x30 -#define ALI15X3_BLOCK_DATA 0x40 -#define ALI15X3_BLOCK_CLR 0x80 - -/* ALI15X3 status register bits */ -#define ALI15X3_STS_IDLE 0x04 -#define ALI15X3_STS_BUSY 0x08 -#define ALI15X3_STS_DONE 0x10 -#define ALI15X3_STS_DEV 0x20 /* device error */ -#define ALI15X3_STS_COLL 0x40 /* collision or no response */ -#define ALI15X3_STS_TERM 0x80 /* terminated by abort */ -#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */ - -static void __init pci_write_config(unsigned long busNo, - unsigned long devNo, - unsigned long fncNo, - unsigned long cnfAdd, - unsigned long cnfData) -{ - ctrl_outl((0x80000000 - + ((busNo & 0xff) << 16) - + ((devNo & 0x1f) << 11) - + ((fncNo & 0x07) << 8) - + (cnfAdd & 0xfc)), PCIPAR); - - ctrl_outl(cnfData, PCIPDR); -} - -/* - Initialize IRQ setting -*/ - -static unsigned char m_irq_mask = 0xfb; -static unsigned char s_irq_mask = 0xff; - -static void disable_mpc1211_irq(unsigned int irq) -{ - if( irq < 8) { - m_irq_mask |= (1 << irq); - outb(m_irq_mask,I8259_M_MR); - } else { - s_irq_mask |= (1 << (irq - 8)); - outb(s_irq_mask,I8259_S_MR); - } - -} - -static void enable_mpc1211_irq(unsigned int irq) -{ - if( irq < 8) { - m_irq_mask &= ~(1 << irq); - outb(m_irq_mask,I8259_M_MR); - } else { - s_irq_mask &= ~(1 << (irq - 8)); - outb(s_irq_mask,I8259_S_MR); - } -} - -static inline int mpc1211_irq_real(unsigned int irq) -{ - int value; - int irqmask; - - if ( irq < 8) { - irqmask = 1<<irq; - outb(0x0b,I8259_M_CR); /* ISR register */ - value = inb(I8259_M_CR) & irqmask; - outb(0x0a,I8259_M_CR); /* back ro the IPR reg */ - return value; - } - irqmask = 1<<(irq - 8); - outb(0x0b,I8259_S_CR); /* ISR register */ - value = inb(I8259_S_CR) & irqmask; - outb(0x0a,I8259_S_CR); /* back ro the IPR reg */ - return value; -} - -static void mask_and_ack_mpc1211(unsigned int irq) -{ - if(irq < 8) { - if(m_irq_mask & (1<<irq)){ - if(!mpc1211_irq_real(irq)){ - atomic_inc(&irq_err_count) - printk("spurious 8259A interrupt: IRQ %x\n",irq); - } - } else { - m_irq_mask |= (1<<irq); - } - inb(I8259_M_MR); /* DUMMY */ - outb(m_irq_mask,I8259_M_MR); /* disable */ - outb(0x60+irq,I8259_M_CR); /* EOI */ - - } else { - if(s_irq_mask & (1<<(irq - 8))){ - if(!mpc1211_irq_real(irq)){ - atomic_inc(&irq_err_count); - printk("spurious 8259A interrupt: IRQ %x\n",irq); - } - } else { - s_irq_mask |= (1<<(irq - 8)); - } - inb(I8259_S_MR); /* DUMMY */ - outb(s_irq_mask,I8259_S_MR); /* disable */ - outb(0x60+(irq-8),I8259_S_CR); /* EOI */ - outb(0x60+2,I8259_M_CR); - } -} - -static void end_mpc1211_irq(unsigned int irq) -{ - enable_mpc1211_irq(irq); -} - -static unsigned int startup_mpc1211_irq(unsigned int irq) -{ - enable_mpc1211_irq(irq); - return 0; -} - -static void shutdown_mpc1211_irq(unsigned int irq) -{ - disable_mpc1211_irq(irq); -} - -static struct hw_interrupt_type mpc1211_irq_type = { - .typename = "MPC1211-IRQ", - .startup = startup_mpc1211_irq, - .shutdown = shutdown_mpc1211_irq, - .enable = enable_mpc1211_irq, - .disable = disable_mpc1211_irq, - .ack = mask_and_ack_mpc1211, - .end = end_mpc1211_irq -}; - -static void make_mpc1211_irq(unsigned int irq) -{ - irq_desc[irq].chip = &mpc1211_irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - disable_mpc1211_irq(irq); -} - -int mpc1211_irq_demux(int irq) -{ - unsigned int poll; - - if( irq == 2 ) { - outb(0x0c,I8259_M_CR); - poll = inb(I8259_M_CR); - if(poll & 0x80) { - irq = (poll & 0x07); - } - if( irq == 2) { - outb(0x0c,I8259_S_CR); - poll = inb(I8259_S_CR); - irq = (poll & 0x07) + 8; - } - } - return irq; -} - -static void __init init_mpc1211_IRQ(void) -{ - int i; - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 1 - * 4: serial 0 - * 5: printer - * 6: floppy - * 8: rtc - * 10: lan - * 12: mouse - * 14: ide0 - * 15: ide1 - */ - - pci_write_config(0,0,0,0x54, 0xb0b0002d); - outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */ - outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */ - outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */ - outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */ - outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */ - outb(0x02, I8259_S_MR); /* s icw3 slave id */ - outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/ - outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/ - outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */ - outb(0xff, I8259_S_MR); /* disable irq8--irq15 */ - - for ( i=0; i < 16; i++) { - if(i != 2) { - make_mpc1211_irq(i); - } - } -} - -static void delay1000(void) -{ - int i; - - for (i=0; i<1000; i++) - ctrl_delay(); -} - -static int put_smb_blk(unsigned char *p, int address, int command, int no) -{ - int temp; - int timeout; - int i; - - outb(0xff, SMBHSTSTS); - temp = inb(SMBHSTSTS); - for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) { - delay1000(); - temp = inb(SMBHSTSTS); - } - if (timeout >= MAX_TIMEOUT){ - return -1; - } - - outb(((address & 0x7f) << 1), SMBHSTADD); - outb(0xc0, SMBHSTCNT); - outb(command & 0xff, SMBHSTCMD); - outb(no & 0x1f, SMBHSTDAT0); - - for(i = 1; i <= no; i++) { - outb(*p++, SMBBLKDAT); - } - outb(0xff, SMBHSTSTART); - - temp = inb(SMBHSTSTS); - for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) { - delay1000(); - temp = inb(SMBHSTSTS); - } - if (timeout >= MAX_TIMEOUT) { - return -2; - } - if ( temp & ALI15X3_STS_ERR ){ - return -3; - } - return 0; -} - -static struct resource heartbeat_resources[] = { - [0] = { - .start = 0xa2000000, - .end = 0xa2000000, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - -static struct platform_device *mpc1211_devices[] __initdata = { - &heartbeat_device, -}; - -static int __init mpc1211_devices_setup(void) -{ - return platform_add_devices(mpc1211_devices, - ARRAY_SIZE(mpc1211_devices)); -} -__initcall(mpc1211_devices_setup); - -/* arch/sh/boards/mpc1211/rtc.c */ -void mpc1211_time_init(void); - -static void __init mpc1211_setup(char **cmdline_p) -{ - unsigned char spd_buf[128]; - - __set_io_port_base(PA_PCI_IO); - - pci_write_config(0,0,0,0x54, 0xb0b00000); - - do { - outb(ALI15X3_ABORT, SMBHSTCNT); - spd_buf[0] = 0x0c; - spd_buf[1] = 0x43; - spd_buf[2] = 0x7f; - spd_buf[3] = 0x03; - spd_buf[4] = 0x00; - spd_buf[5] = 0x03; - spd_buf[6] = 0x00; - } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0); - - board_time_init = mpc1211_time_init; - - return 0; -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_mpc1211 __initmv = { - .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)", - .mv_setup = mpc1211_setup, - .mv_nr_irqs = 48, - .mv_irq_demux = mpc1211_irq_demux, - .mv_init_irq = init_mpc1211_IRQ, -}; diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index e7c150d49702..01af44245b57 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -14,6 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/io.h> #include <asm/sh_keysc.h> @@ -27,6 +28,11 @@ * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A) */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_HIGH, +}; + static struct resource smc91x_eth_resources[] = { [0] = { .name = "SMC91C111" , @@ -36,7 +42,7 @@ static struct resource smc91x_eth_resources[] = { }, [1] = { .start = 32, /* IRQ0 */ - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + .flags = IORESOURCE_IRQ, }, }; @@ -44,6 +50,9 @@ static struct platform_device smc91x_eth_device = { .name = "smc91x", .num_resources = ARRAY_SIZE(smc91x_eth_resources), .resource = smc91x_eth_resources, + .dev = { + .platform_data = &smc91x_info, + }, }; static struct sh_keysc_info sh_keysc_info = { diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c index 68f0ad1b637d..ae1cfcb29700 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -62,7 +62,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7780mp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { printk(KERN_INFO "Using r7780mp interrupt controller.\n"); diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index bd34048ed0e1..9d3921fe27c0 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -55,7 +55,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7780rp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if (ctrl_inw(0xa5000600)) { printk(KERN_INFO "Using r7780rp interrupt controller.\n"); diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index bf7ec107fbc6..896c045aa39d 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -64,7 +64,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7785rp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) return NULL; diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index ac0a96522e45..bc79afb6fc4c 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -316,7 +316,7 @@ static void __init highlander_setup(char **cmdline_p) static unsigned char irl2irq[HL_NR_IRL]; -int highlander_irq_demux(int irq) +static int highlander_irq_demux(int irq) { if (irq >= HL_NR_IRL || !irl2irq[irq]) return irq; @@ -324,27 +324,9 @@ int highlander_irq_demux(int irq) return irl2irq[irq]; } -void __init highlander_init_irq(void) +static void __init highlander_init_irq(void) { - unsigned char *ucp = NULL; - - do { -#ifdef CONFIG_SH_R7780MP - ucp = highlander_init_irq_r7780mp(); - if (ucp) - break; -#endif -#ifdef CONFIG_SH_R7785RP - ucp = highlander_init_irq_r7785rp(); - if (ucp) - break; -#endif -#ifdef CONFIG_SH_R7780RP - ucp = highlander_init_irq_r7780rp(); - if (ucp) - break; -#endif - } while (0); + unsigned char *ucp = highlander_plat_irq_setup(); if (ucp) { plat_irq_setup_pins(IRQ_MODE_IRL3210); diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index f21ee49ef3a5..2308e8753bcd 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> -#include <linux/serial_8250.h> #include <linux/sm501.h> #include <linux/sm501-regs.h> #include <linux/pm.h> @@ -109,28 +108,6 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; -#ifdef CONFIG_MFD_SM501 -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void __iomem *)0xb3e30000, - .mapbase = 0xb3e30000, - .iotype = UPIO_MEM, - .irq = IRQ_VOYAGER, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - .regshift = 2, - .uartclk = (9600 * 16), - }, - { 0 }, -}; - -static struct platform_device uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = uart_platform_data, - }, -}; - static struct resource sm501_resources[] = { [0] = { .start = 0x10000000, @@ -186,11 +163,7 @@ static struct sm501_platdata_fb sm501_fb_pdata = { }; static struct sm501_initdata sm501_initdata = { - .gpio_high = { - .set = 0x00001fe0, - .mask = 0x0, - }, - .devices = SM501_USE_USB_HOST, + .devices = SM501_USE_USB_HOST | SM501_USE_UART0, }; static struct sm501_platdata sm501_platform_data = { @@ -208,13 +181,8 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; -#endif /* CONFIG_MFD_SM501 */ - static struct platform_device *rts7751r2d_devices[] __initdata = { -#ifdef CONFIG_MFD_SM501 - &uart_device, &sm501_device, -#endif &heartbeat_device, &spi_sh_sci_device, }; @@ -234,7 +202,9 @@ static int __init rts7751r2d_devices_setup(void) { if (register_trapped_io(&cf_trapped_io) == 0) platform_device_register(&cf_ide_device); + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); + return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } @@ -275,16 +245,6 @@ static void __init rts7751r2d_setup(char **cmdline_p) sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; writel(readl(sm501_reg) | 0x00f107c0, sm501_reg); - - /* - * Power Mode Gate - Enable UART0 - */ - - sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE; - writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); - - sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE; - writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); } /* diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index 5b3ee089d91d..4fe84cc08406 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -3,12 +3,13 @@ * linux/arch/sh/boards/se/7206/setup.c * * Copyright (C) 2006 Yoshinori Sato - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2008 Paul Mundt * * Hitachi 7206 SolutionEngine Support. */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/smc91x.h> #include <asm/se7206.h> #include <asm/io.h> #include <asm/machvec.h> @@ -16,8 +17,9 @@ static struct resource smc91x_resources[] = { [0] = { - .start = 0x300, - .end = 0x300 + 0x020 - 1, + .name = "smc91x-regs", + .start = PA_SMSC + 0x300, + .end = PA_SMSC + 0x300 + 0x020 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -27,9 +29,18 @@ static struct resource smc91x_resources[] = { }, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 33f6ee71f848..ede3957fc14a 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/se7722.h> #include <asm/io.h> @@ -44,6 +45,10 @@ static struct platform_device heartbeat_device = { }; /* SMC91x */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + static struct resource smc91x_eth_resources[] = { [0] = { .name = "smc91x-regs" , @@ -64,6 +69,7 @@ static struct platform_device smc91x_eth_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, }, .num_resources = ARRAY_SIZE(smc91x_eth_resources), .resource = smc91x_eth_resources, diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index 6ac8d4a4ed1d..c0d25fb1aa60 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ head_32.o misc_32.o piggy.o -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 4334f2b86d8f..912f3e205a0d 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -13,7 +13,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ head_64.o misc_64.o cache.o piggy.o -EXTRA_AFLAGS := -traditional OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \ $(obj)/cache.o diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index ee5900817f8f..287408b2ace6 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Wed Feb 6 21:52:20 2008 +# Linux kernel version: 2.6.26-rc3 +# Thu May 22 14:30:07 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,18 +37,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -61,11 +60,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -77,11 +78,15 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -105,7 +110,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -118,6 +122,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -135,6 +140,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -142,6 +148,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -255,7 +262,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -323,8 +329,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -376,7 +380,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -385,11 +472,13 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -461,6 +550,7 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -482,13 +572,20 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_SH_KEYSC=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -508,6 +605,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -531,16 +629,40 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_SH_MOBILE=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -553,12 +675,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -592,6 +724,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -608,6 +742,7 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -623,7 +758,9 @@ CONFIG_USB_G_SERIAL=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -640,15 +777,31 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -657,10 +810,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -673,13 +822,10 @@ CONFIG_RTC_DRV_SH=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -720,10 +866,13 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set @@ -743,6 +892,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -763,48 +913,77 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y @@ -812,6 +991,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig new file mode 100644 index 000000000000..a0ebd439cbd2 --- /dev/null +++ b/arch/sh/configs/rsk7203_defconfig @@ -0,0 +1,841 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 13:02:42 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +CONFIG_CPU_SUBTYPE_SH7203=y +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_FPU=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_TIMER_IRQ=142 +CONFIG_SH_PCLK_FREQ=16670800 +CONFIG_SH_CLK_MD=0 +# CONFIG_TICK_ONESHOT is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000 +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_BOOTMEM=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 0d0cda908270..6b34baa26eae 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Sep 13 16:40:16 2007 +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 20:27:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -25,47 +27,82 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_DEVICE=y +# CONFIG_GROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MM_OWNER=y +CONFIG_CGROUP_MEM_RES_CTLR=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set @@ -81,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_CLASSIC_RCU is not set # # System type @@ -88,7 +126,10 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set CONFIG_CPU_SUBTYPE_SH7206=y +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -97,6 +138,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -105,14 +147,17 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -121,23 +166,25 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -183,13 +230,16 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_SH_CPU_FREQ is not set +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -213,11 +263,15 @@ CONFIG_HEARTBEAT=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_KEXEC is not set +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_GUSA=y # # Boot options @@ -225,25 +279,25 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel" +CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" # # Bus options # -# CONFIG_CF_ENABLER is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_SHARED_FLAT=y +CONFIG_BINFMT_MISC=y # # Networking @@ -253,14 +307,24 @@ CONFIG_NET=y # # Networking options # -# CONFIG_PACKET is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -273,14 +337,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -297,10 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -308,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -329,8 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -339,11 +401,9 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -356,6 +416,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -390,7 +451,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -418,13 +478,19 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_EEPROM_93CX6=y +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -443,23 +509,30 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -469,28 +542,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -502,6 +554,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -520,106 +573,119 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_SH=y # CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -642,10 +708,11 @@ CONFIG_ROMFS_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y -# CONFIG_SYSFS is not set -# CONFIG_TMPFS is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems @@ -658,18 +725,28 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -681,30 +758,20 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# - -# -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -712,7 +779,10 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_OBJECTS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -722,38 +792,123 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800 -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # # Security options # # CONFIG_KEYS is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index ab77b0e0fa0e..938817e34e2b 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -154,4 +154,4 @@ module_exit(heartbeat_exit); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR("Paul Mundt"); -MODULE_LICENSE("GPLv2"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index d6e0e2bdaad5..79baa47af977 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -184,9 +184,8 @@ int intc_irq_describe(char* p, int irq) void __init plat_irq_setup(void) { - unsigned long long __dummy0, __dummy1=~0x00000000100000f0; + unsigned long long __dummy0, __dummy1=~0x00000000100000f0; unsigned long reg; - unsigned long data; int i; intc_virt = onchip_remap(INTC_BASE, 1024, "INTC"); @@ -196,11 +195,8 @@ void __init plat_irq_setup(void) /* Set default: per-line enable/disable, priority driven ack/eoi */ - for (i = 0; i < NR_INTC_IRQS; i++) { - if (platform_int_priority[i] != NO_PRIORITY) { - irq_desc[i].chip = &intc_irq_type; - } - } + for (i = 0; i < NR_INTC_IRQS; i++) + irq_desc[i].chip = &intc_irq_type; /* Disable all interrupts and set all priorities to 0 to avoid trouble */ @@ -211,35 +207,43 @@ void __init plat_irq_setup(void) ctrl_outl( NO_PRIORITY, reg); - /* Set IRLM */ - /* If all the priorities are set to 'no priority', then - * assume we are using encoded mode. - */ - irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \ - platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3]; - - if (irlm == NO_PRIORITY) { - /* IRLM = 0 */ - reg = INTC_ICR_CLEAR; - i = IRQ_INTA; - printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); - } else { - /* IRLM = 1 */ - reg = INTC_ICR_SET; - i = IRQ_IRL0; - } - ctrl_outl(INTC_ICR_IRLM, reg); - - /* Set interrupt priorities according to platform description */ - for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { - data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4); - if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { - /* Upon the 7th, set Priority Register */ - ctrl_outl(data, reg); - data = 0; - reg += 8; +#ifdef CONFIG_SH_CAYMAN + { + unsigned long data; + + /* Set IRLM */ + /* If all the priorities are set to 'no priority', then + * assume we are using encoded mode. + */ + irlm = platform_int_priority[IRQ_IRL0] + + platform_int_priority[IRQ_IRL1] + + platform_int_priority[IRQ_IRL2] + + platform_int_priority[IRQ_IRL3]; + if (irlm == NO_PRIORITY) { + /* IRLM = 0 */ + reg = INTC_ICR_CLEAR; + i = IRQ_INTA; + printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); + } else { + /* IRLM = 1 */ + reg = INTC_ICR_SET; + i = IRQ_IRL0; + } + ctrl_outl(INTC_ICR_IRLM, reg); + + /* Set interrupt priorities according to platform description */ + for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { + data |= platform_int_priority[i] << + ((i % INTC_INTPRI_PPREG) * 4); + if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { + /* Upon the 7th, set Priority Register */ + ctrl_outl(data, reg); + data = 0; + reg += 8; + } } } +#endif /* * And now let interrupts come in. diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index 84806b2027f8..da5dae787888 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -1,7 +1,7 @@ /* * Shared interrupt handling code for IPR and INTC2 types of IRQs. * - * Copyright (C) 2007 Magnus Damm + * Copyright (C) 2007, 2008 Magnus Damm * * Based on intc2.c and ipr.c * @@ -62,6 +62,9 @@ struct intc_desc_int { #endif static unsigned int intc_prio_level[NR_IRQS]; /* for now */ +#ifdef CONFIG_CPU_SH3 +static unsigned long ack_handle[NR_IRQS]; +#endif static inline struct intc_desc_int *get_intc_desc(unsigned int irq) { @@ -98,17 +101,26 @@ static void write_32(unsigned long addr, unsigned long h, unsigned long data) static void modify_8(unsigned long addr, unsigned long h, unsigned long data) { + unsigned long flags; + local_irq_save(flags); ctrl_outb(set_field(ctrl_inb(addr), data, h), addr); + local_irq_restore(flags); } static void modify_16(unsigned long addr, unsigned long h, unsigned long data) { + unsigned long flags; + local_irq_save(flags); ctrl_outw(set_field(ctrl_inw(addr), data, h), addr); + local_irq_restore(flags); } static void modify_32(unsigned long addr, unsigned long h, unsigned long data) { + unsigned long flags; + local_irq_save(flags); ctrl_outl(set_field(ctrl_inl(addr), data, h), addr); + local_irq_restore(flags); } enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 }; @@ -219,6 +231,25 @@ static void intc_disable(unsigned int irq) } } +#ifdef CONFIG_CPU_SH3 +static void intc_mask_ack(unsigned int irq) +{ + struct intc_desc_int *d = get_intc_desc(irq); + unsigned long handle = ack_handle[irq]; + unsigned long addr; + + intc_disable(irq); + + /* read register and write zero only to the assocaited bit */ + + if (handle) { + addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); + ctrl_inb(addr); + ctrl_outb(0x3f ^ set_field(0, 1, handle), addr); + } +} +#endif + static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp, unsigned int nr_hp, unsigned int irq) @@ -280,7 +311,12 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { [IRQ_TYPE_EDGE_FALLING] = VALID(0), [IRQ_TYPE_EDGE_RISING] = VALID(1), [IRQ_TYPE_LEVEL_LOW] = VALID(2), + /* SH7706, SH7707 and SH7709 do not support high level triggered */ +#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7707) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7709) [IRQ_TYPE_LEVEL_HIGH] = VALID(3), +#endif }; static int intc_set_sense(unsigned int irq, unsigned int type) @@ -430,6 +466,40 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, return 0; } +#ifdef CONFIG_CPU_SH3 +static unsigned int __init intc_ack_data(struct intc_desc *desc, + struct intc_desc_int *d, + intc_enum enum_id) +{ + struct intc_mask_reg *mr = desc->ack_regs; + unsigned int i, j, fn, mode; + unsigned long reg_e, reg_d; + + for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) { + mr = desc->ack_regs + i; + + for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) { + if (mr->enum_ids[j] != enum_id) + continue; + + fn = REG_FN_MODIFY_BASE; + mode = MODE_ENABLE_REG; + reg_e = mr->set_reg; + reg_d = mr->set_reg; + + fn += (mr->reg_width >> 3) - 1; + return _INTC_MK(fn, mode, + intc_get_reg(d, reg_e), + intc_get_reg(d, reg_d), + 1, + (mr->reg_width - 1) - j); + } + } + + return 0; +} +#endif + static unsigned int __init intc_sense_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id) @@ -530,6 +600,11 @@ static void __init intc_register_irq(struct intc_desc *desc, /* irq should be disabled by default */ d->chip.mask(irq); + +#ifdef CONFIG_CPU_SH3 + if (desc->ack_regs) + ack_handle[irq] = intc_ack_data(desc, d, enum_id); +#endif } static unsigned int __init save_reg(struct intc_desc_int *d, @@ -560,6 +635,9 @@ void __init register_intc_controller(struct intc_desc *desc) d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; +#ifdef CONFIG_CPU_SH3 + d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0; +#endif d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); #ifdef CONFIG_SMP d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp)); @@ -592,14 +670,23 @@ void __init register_intc_controller(struct intc_desc *desc) } } - BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ - d->chip.name = desc->name; d->chip.mask = intc_disable; d->chip.unmask = intc_enable; d->chip.mask_ack = intc_disable; d->chip.set_type = intc_set_sense; +#ifdef CONFIG_CPU_SH3 + if (desc->ack_regs) { + for (i = 0; i < desc->nr_ack_regs; i++) + k += save_reg(d, k, desc->ack_regs[i].set_reg, 0); + + d->chip.mask_ack = intc_mask_ack; + } +#endif + + BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ + for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c index 5627c0b3ffa8..6df2fb98eb30 100644 --- a/arch/sh/kernel/cpu/sh2a/fpu.c +++ b/arch/sh/kernel/cpu/sh2a/fpu.c @@ -300,7 +300,7 @@ static int denormal_addf(int hx, int hy) iy = hy & 0x7fffffff; if (iy < 0x00800000) { ix = denormal_subf1(ix, iy); - if (ix < 0) { + if ((int) ix < 0) { ix = -ix; sign ^= 0x80000000; } @@ -385,7 +385,7 @@ static long long denormal_addd(long long hx, long long hy) iy = hy & 0x7fffffffffffffffLL; if (iy < 0x0010000000000000LL) { ix = denormal_subd1(ix, iy); - if (ix < 0) { + if ((int) ix < 0) { ix = -ix; sign ^= 0x8000000000000000LL; } diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 3ae4d9111f19..511de55af832 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -2,7 +2,7 @@ # Makefile for the Linux/SuperH SH-3 backends. # -obj-y := ex.o probe.o entry.o +obj-y := ex.o probe.o entry.o setup-sh3.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c new file mode 100644 index 000000000000..c98846857855 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh3.c @@ -0,0 +1,71 @@ +/* + * Shared SH3 Setup code + * + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> + +/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */ + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, +}; + +static struct intc_vect vectors_irq0123[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static struct intc_vect vectors_irq45[] __initdata = { + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4000004, 0, 8, /* IRR0 */ + { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123", + vectors_irq0123, NULL, NULL, + prio_registers, sense_registers, ack_registers); + +static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45", + vectors_irq45, NULL, NULL, + prio_registers, sense_registers, ack_registers); + +#define INTC_ICR1 0xa4000010UL +#define INTC_ICR1_IRQLVL (1<<14) + +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { + ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1); + register_intc_controller(&intc_desc_irq0123); + return; + } + BUG(); +} + +void __init plat_irq_setup_sh3(void) +{ + register_intc_controller(&intc_desc_irq45); +} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index f581534cb732..6468ae86b944 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -37,7 +37,7 @@ enum { }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), @@ -48,7 +48,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(ADC_ADI, 0x980), INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40), INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20), - INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0), + INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), @@ -81,14 +81,6 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, NULL, prio_registers, NULL); -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), -}; - -static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL, - NULL, prio_registers, NULL); - static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xa4410000, @@ -159,16 +151,8 @@ static int __init sh7705_devices_setup(void) } __initcall(sh7705_devices_setup); -void __init plat_irq_setup_pins(int mode) -{ - if (mode == IRQ_MODE_IRQ) { - register_intc_controller(&intc_desc_irq); - return; - } - BUG(); -} - void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); + plat_irq_setup_sh3(); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index d3733b13ea52..93c55e2ed952 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -52,7 +52,7 @@ static struct intc_vect vectors[] __initdata = { #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), INTC_VECT(ADC_ADI, 0x980), @@ -104,18 +104,6 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, NULL, prio_registers, NULL); -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), -}; - -static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL, - NULL, prio_registers, NULL); -#endif - static struct resource rtc_resources[] = { [0] = { .start = 0xfffffec0, @@ -194,24 +182,12 @@ static int __init sh770x_devices_setup(void) } __initcall(sh770x_devices_setup); -#define INTC_ICR1 0xa4000010UL -#define INTC_ICR1_IRQLVL (1<<14) - -void __init plat_irq_setup_pins(int mode) +void __init plat_irq_setup(void) { - if (mode == IRQ_MODE_IRQ) { + register_intc_controller(&intc_desc); #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) - ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1); - register_intc_controller(&intc_desc_irq); - return; + plat_irq_setup_sh3(); #endif - } - BUG(); -} - -void __init plat_irq_setup(void) -{ - register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 7406c9ad9259..77eee481de47 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -38,7 +38,7 @@ enum { }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), @@ -79,10 +79,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } }, - { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } }, -#ifdef CONFIG_CPU_SUBTYPE_SH7710 - { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } }, -#endif + { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } }, { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } }, { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } }, { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } }, @@ -91,14 +88,6 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, NULL, prio_registers, NULL); -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), -}; - -static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL, - NULL, prio_registers, NULL); - static struct resource rtc_resources[] = { [0] = { .start = 0xa413fec0, @@ -170,16 +159,8 @@ static int __init sh7710_devices_setup(void) } __initcall(sh7710_devices_setup); -void __init plat_irq_setup_pins(int mode) -{ - if (mode == IRQ_MODE_IRQ) { - register_intc_controller(&intc_desc_irq); - return; - } - BUG(); -} - void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); + plat_irq_setup_sh3(); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 8028082527c5..f807a21b066c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -19,10 +19,6 @@ #include <linux/serial_sci.h> #include <asm/rtc.h> -#define INTC_ICR1 0xA4140010UL -#define INTC_ICR_IRLM 0x4000 -#define INTC_ICR_IRQ (~INTC_ICR_IRLM) - static struct resource rtc_resources[] = { [0] = { .start = 0xa413fec0, @@ -170,6 +166,7 @@ enum { }; static struct intc_vect vectors[] __initdata = { + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), @@ -214,11 +211,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } }, -#if defined(CONFIG_CPU_SUBTYPE_SH7720) { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } }, -#else - { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } }, -#endif { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } }, { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } }, { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } }, @@ -229,32 +222,8 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, NULL, prio_registers, NULL); -static struct intc_sense_reg sense_registers[] __initdata = { - { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, -}; - -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), -}; - -static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq, - NULL, NULL, prio_registers, sense_registers); - -void __init plat_irq_setup_pins(int mode) -{ - switch (mode) { - case IRQ_MODE_IRQ: - ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1); - register_intc_controller(&intc_irq_desc); - break; - default: - BUG(); - } -} - void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); + plat_irq_setup_sh3(); } diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index ebceb0dadff5..be4926969181 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -132,6 +132,7 @@ int __init detect_cpu_and_cache_system(void) switch (prr) { case 0x50: + case 0x51: boot_cpu_data.type = CPU_SH7723; boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE; break; diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c index 805535aa505e..27fa81bef6a0 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -26,7 +26,7 @@ static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, static void master_clk_init(struct clk *clk) { - clk->rate *= 36; + clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f]; } static struct clk_ops sh7785_master_clk_ops = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 069314037049..62ebccf18b3c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -16,7 +16,7 @@ static struct resource usbf_resources[] = { [0] = { - .name = "USBF", + .name = "m66592_udc", .start = 0x04480000, .end = 0x044800FF, .flags = IORESOURCE_MEM, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 16925cf28db8..a0470f2f5479 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -16,6 +16,21 @@ static struct plat_sci_port sci_platform_data[] = { { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + },{ + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + },{ + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, @@ -73,9 +88,35 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +static struct resource sh7723_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7723_usb_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sh7723_usb_host_resources), + .resource = sh7723_usb_host_resources, +}; + static struct platform_device *sh7723_devices[] __initdata = { &sci_device, &rtc_device, + &sh7723_usb_host_device, }; static int __init sh7723_devices_setup(void) @@ -153,7 +194,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(VIO_VOUI,0x8E0), INTC_VECT(SCIFA_SCIFA0,0x900), - INTC_VECT(VPU_VPUI,0x920), + INTC_VECT(VPU_VPUI,0x980), INTC_VECT(TPU_TPUI,0x9A0), INTC_VECT(ADC_ADI,0x9E0), INTC_VECT(USB_USI0,0xA20), @@ -292,9 +333,3 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } - -void __init plat_mem_setup(void) -{ - /* Register the URAM space as Node 1 */ - setup_bootmem_node(1, 0x055f0000, 0x05610000); -} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index ae2b22219f02..f189a559462b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -291,8 +291,9 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); + /* External interrupt pins in IRL mode */ static struct intc_vect irl_vectors[] __initdata = { @@ -324,10 +325,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors, - NULL, NULL, irl7654_mask_registers, NULL, NULL); + NULL, irl7654_mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors, - NULL, NULL, irl3210_mask_registers, NULL, NULL); + NULL, irl3210_mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index ba8750176d91..05372ed6c568 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -143,12 +143,22 @@ resvec_save_area: trap_jtable: .long do_exception_error /* 0x000 */ .long do_exception_error /* 0x020 */ +#ifdef CONFIG_MMU .long tlb_miss_load /* 0x040 */ .long tlb_miss_store /* 0x060 */ +#else + .long do_exception_error + .long do_exception_error +#endif ! ARTIFICIAL pseudo-EXPEVT setting .long do_debug_interrupt /* 0x080 */ +#ifdef CONFIG_MMU .long tlb_miss_load /* 0x0A0 */ .long tlb_miss_store /* 0x0C0 */ +#else + .long do_exception_error + .long do_exception_error +#endif .long do_address_error_load /* 0x0E0 */ .long do_address_error_store /* 0x100 */ #ifdef CONFIG_SH_FPU @@ -185,10 +195,18 @@ trap_jtable: .endr .long do_IRQ /* 0xA00 */ .long do_IRQ /* 0xA20 */ +#ifdef CONFIG_MMU .long itlb_miss_or_IRQ /* 0xA40 */ +#else + .long do_IRQ +#endif .long do_IRQ /* 0xA60 */ .long do_IRQ /* 0xA80 */ +#ifdef CONFIG_MMU .long itlb_miss_or_IRQ /* 0xAA0 */ +#else + .long do_IRQ +#endif .long do_exception_error /* 0xAC0 */ .long do_address_error_exec /* 0xAE0 */ .rept 8 @@ -274,6 +292,7 @@ not_a_tlb_miss: * Instead of '.space 1024-TEXT_SIZE' place the RESVEC * block making sure the final alignment is correct. */ +#ifdef CONFIG_MMU tlb_miss: synco /* TAKum03020 (but probably a good idea anyway.) */ putcon SP, KCR1 @@ -377,6 +396,9 @@ fixup_to_invoke_general_handler: getcon KCR1, SP pta handle_exception, tr0 blink tr0, ZERO +#else /* CONFIG_MMU */ + .balign 256 +#endif /* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE DOES END UP AT VBR+0x600 */ @@ -1103,6 +1125,7 @@ restore_all: * fpu_error_or_IRQ? is a helper to deflect to the right cause. * */ +#ifdef CONFIG_MMU tlb_miss_load: or SP, ZERO, r2 or ZERO, ZERO, r3 /* Read */ @@ -1132,6 +1155,7 @@ call_do_page_fault: movi do_page_fault, r6 ptabs r6, tr0 blink tr0, ZERO +#endif /* CONFIG_MMU */ fpu_error_or_IRQA: pta its_IRQ, tr0 @@ -1481,6 +1505,7 @@ poke_real_address_q: ptabs LINK, tr0 blink tr0, r63 +#ifdef CONFIG_MMU /* * --- User Access Handling Section */ @@ -1604,6 +1629,7 @@ ___clear_user_exit: ptabs LINK, tr0 blink tr0, ZERO +#endif /* CONFIG_MMU */ /* * int __strncpy_from_user(unsigned long __dest, unsigned long __src, @@ -2014,9 +2040,11 @@ sa_default_restorer: .global asm_uaccess_start /* Just a marker */ asm_uaccess_start: +#ifdef CONFIG_MMU .long ___copy_user1, ___copy_user_exit .long ___copy_user2, ___copy_user_exit .long ___clear_user1, ___clear_user_exit +#endif .long ___strncpy_from_user1, ___strncpy_from_user_exit .long ___strnlen_user1, ___strnlen_user_exit .long ___get_user_asm_b1, ___get_user_asm_b_exit diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c index 31f8cb0f6374..92ad844b5c12 100644 --- a/arch/sh/kernel/cpu/sh5/probe.c +++ b/arch/sh/kernel/cpu/sh5/probe.c @@ -15,6 +15,7 @@ #include <linux/string.h> #include <asm/processor.h> #include <asm/cache.h> +#include <asm/tlb.h> int __init detect_cpu_and_cache_system(void) { @@ -67,5 +68,8 @@ int __init detect_cpu_and_cache_system(void) set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags)); #endif + /* Setup some I/D TLB defaults */ + sh64_tlb_init(); + return 0; } diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 957f25611543..6b7d166694e2 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -141,7 +141,9 @@ static void scif_sercon_init(char *s) */ static void scif_sercon_init(char *s) { + struct uart_port *port = &scif_port; unsigned baud = DEFAULT_BAUD; + unsigned int status; char *e; if (*s == ',') @@ -160,19 +162,25 @@ static void scif_sercon_init(char *s) baud = DEFAULT_BAUD; } - ctrl_outw(0, scif_port.mapbase + 8); - ctrl_outw(0, scif_port.mapbase); + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0); /* TE=0, RE=0 */ + sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + sci_out(port, SCSMR, 0); /* Set baud rate */ - ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1, scif_port.mapbase + 4); - - ctrl_outw(12, scif_port.mapbase + 24); - ctrl_outw(8, scif_port.mapbase + 24); - ctrl_outw(0, scif_port.mapbase + 32); - ctrl_outw(0x60, scif_port.mapbase + 16); - ctrl_outw(0, scif_port.mapbase + 36); - ctrl_outw(0x30, scif_port.mapbase + 8); + sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) / + (32 * baud) - 1); + udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ + + sci_out(port, SCSPTR, 0); + sci_out(port, SCxSR, 0x60); + sci_out(port, SCLSR, 0); + + sci_out(port, SCFCR, 0); + sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */ } #endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */ #endif /* !defined(CONFIG_SH_STANDARD_BIOS) */ diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 926b2e7b11c1..718bd2356b34 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -1,9 +1,6 @@ -/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ - * - * linux/arch/sh/entry.S - * +/* * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -262,6 +259,7 @@ __restore_all: .align 2 syscall_badsys: ! Bad syscall number + get_current_thread_info r8, r0 mov #-ENOSYS, r0 bra resume_userspace mov.l r0, @(OFF_R0,r15) ! Return value @@ -281,7 +279,9 @@ debug_trap: mov.l 1f, r8 add r0, r8 mov.l @r8, r8 - jmp @r8 + jsr @r8 + nop + bra __restore_all nop .align 2 diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index d67d7ed09f22..ae0a382a82eb 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -30,8 +30,8 @@ ENTRY(empty_zero_page) .long 0 /* RAMDISK_FLAGS */ .long 0x0200 /* ORIG_ROOT_DEV */ .long 1 /* LOADER_TYPE */ - .long 0x00360000 /* INITRD_START */ - .long 0x000a0000 /* INITRD_SIZE */ + .long 0x00000000 /* INITRD_START */ + .long 0x00000000 /* INITRD_SIZE */ #ifdef CONFIG_32BIT .long 0x53453f00 + 32 /* "SE?" = 32 bit */ #else diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c index f9bcc606127e..b151a25cb14d 100644 --- a/arch/sh/kernel/init_task.c +++ b/arch/sh/kernel/init_task.c @@ -8,7 +8,6 @@ #include <asm/pgtable.h> static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct pt_regs fake_swapper_regs; diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index d453c3a1c79f..bf8ac4c71640 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -274,8 +274,7 @@ static char *mem_to_hex(const char *mem, char *buf, const int count) } for (i = 0; i < count; i++) { ch = *mem++; - *buf++ = highhex(ch); - *buf++ = lowhex(ch); + buf = pack_hex_byte(buf, ch); } *buf = 0; return (buf); @@ -330,14 +329,6 @@ static char *ebin_to_mem(const char *buf, char *mem, int count) return mem; } -/* Pack a hex byte */ -static char *pack_hex_byte(char *pkt, int byte) -{ - *pkt++ = hexchars[(byte >> 4) & 0xf]; - *pkt++ = hexchars[(byte & 0xf)]; - return pkt; -} - /* Scan for the start char '$', read the packet and check the checksum */ static void get_packet(char *buffer, int buflen) { @@ -435,8 +426,8 @@ static void put_packet(char *buffer) /* '#' Separator, put high and low components of checksum */ put_debug_char('#'); - put_debug_char(highhex(checksum)); - put_debug_char(lowhex(checksum)); + put_debug_char(hex_asc_hi(checksum)); + put_debug_char(hex_asc_lo(checksum)); } while ((get_debug_char()) != '+'); /* While no ack */ } @@ -658,8 +649,8 @@ static void undo_single_step(void) static void send_signal_msg(const int signum) { out_buffer[0] = 'S'; - out_buffer[1] = highhex(signum); - out_buffer[2] = lowhex(signum); + out_buffer[1] = hex_asc_hi(signum); + out_buffer[2] = hex_asc_lo(signum); out_buffer[3] = 0; put_packet(out_buffer); } diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index b3d0a03b4c76..5482e65375a9 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -30,6 +30,7 @@ #include <linux/fs.h> #include <linux/string.h> #include <linux/kernel.h> +#include <asm/unaligned.h> void *module_alloc(unsigned long size) { @@ -56,34 +57,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, return 0; } -#ifdef CONFIG_SUPERH32 -#define COPY_UNALIGNED_WORD(sw, tw, align) \ -{ \ - void *__s = &(sw), *__t = &(tw); \ - unsigned short *__s2 = __s, *__t2 = __t; \ - unsigned char *__s1 = __s, *__t1 = __t; \ - switch ((align)) \ - { \ - case 0: \ - *(unsigned long *) __t = *(unsigned long *) __s; \ - break; \ - case 2: \ - *__t2++ = *__s2++; \ - *__t2 = *__s2; \ - break; \ - default: \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1 = *__s1; \ - break; \ - } \ -} -#else -/* One thing SHmedia doesn't screw up! */ -#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); } -#endif - int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, @@ -96,7 +69,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, Elf32_Addr relocation; uint32_t *location; uint32_t value; - int align; pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); @@ -109,7 +81,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + ELF32_R_SYM(rel[i].r_info); relocation = sym->st_value + rel[i].r_addend; - align = (int)location & 3; #ifdef CONFIG_SUPERH64 /* For text addresses, bit2 of the st_other field indicates @@ -122,15 +93,15 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SH_DIR32: - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_REL32: relocation = (relocation - (Elf32_Addr) location); - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_IMM_LOW16: *location = (*location & ~0x3fffc00) | diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 284f66f1ebbe..bca2bbc575db 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -53,6 +53,7 @@ EXPORT_SYMBOL(cpu_data); * sh_mv= on the command line, prior to .machvec.init teardown. */ struct sh_machine_vector sh_mv = { .mv_name = "generic", }; +EXPORT_SYMBOL(sh_mv); #ifdef CONFIG_VT struct screen_info screen_info; @@ -76,11 +77,18 @@ static struct resource data_resource = { .flags = IORESOURCE_BUSY | IORESOURCE_MEM, }; +static struct resource bss_resource = { + .name = "Kernel bss", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM, +}; + unsigned long memory_start; EXPORT_SYMBOL(memory_start); unsigned long memory_end = 0; EXPORT_SYMBOL(memory_end); +static struct resource mem_resources[MAX_NUMNODES]; + int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; static int __init early_parse_mem(char *p) @@ -169,6 +177,40 @@ static inline void __init reserve_crashkernel(void) {} #endif +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn) +{ + struct resource *res = &mem_resources[nid]; + + WARN_ON(res->name); /* max one active range per node for now */ + + res->name = "System RAM"; + res->start = start_pfn << PAGE_SHIFT; + res->end = (end_pfn << PAGE_SHIFT) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, res)) { + pr_err("unable to request memory_resource 0x%lx 0x%lx\n", + start_pfn, end_pfn); + return; + } + + /* + * We don't know which RAM region contains kernel data, + * so we try it repeatedly and let the resource manager + * test it. + */ + request_resource(res, &code_resource); + request_resource(res, &data_resource); + request_resource(res, &bss_resource); + +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + request_resource(res, &crashk_res); +#endif + + add_active_range(nid, start_pfn, end_pfn); +} + void __init setup_bootmem_allocator(unsigned long free_pfn) { unsigned long bootmap_size; @@ -181,7 +223,7 @@ void __init setup_bootmem_allocator(unsigned long free_pfn) bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn, min_low_pfn, max_low_pfn); - add_active_range(0, min_low_pfn, max_low_pfn); + __add_active_range(0, min_low_pfn, max_low_pfn); register_bootmem_low_pages(); node_set_online(0); @@ -250,6 +292,17 @@ void __init setup_arch(char **cmdline_p) ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); + printk(KERN_NOTICE "Boot params:\n" + "... MOUNT_ROOT_RDONLY - %08lx\n" + "... RAMDISK_FLAGS - %08lx\n" + "... ORIG_ROOT_DEV - %08lx\n" + "... LOADER_TYPE - %08lx\n" + "... INITRD_START - %08lx\n" + "... INITRD_SIZE - %08lx\n", + MOUNT_ROOT_RDONLY, RAMDISK_FLAGS, + ORIG_ROOT_DEV, LOADER_TYPE, + INITRD_START, INITRD_SIZE); + #ifdef CONFIG_BLK_DEV_RAM rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); @@ -267,6 +320,8 @@ void __init setup_arch(char **cmdline_p) code_resource.end = virt_to_phys(_etext)-1; data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; + bss_resource.start = virt_to_phys(__bss_start); + bss_resource.end = virt_to_phys(_ebss)-1; memory_start = (unsigned long)__va(__MEMORY_START); if (!memory_end) diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 6d405462cee8..8f916536719c 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -20,8 +20,6 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); extern struct hw_interrupt_type no_irq_type; -EXPORT_SYMBOL(sh_mv); - /* platform dependent support */ EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(kernel_thread); diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index a310c9707f03..9324d32adacc 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -16,6 +16,7 @@ #include <linux/in6.h> #include <linux/interrupt.h> #include <linux/screen_info.h> +#include <asm/cacheflush.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/checksum.h> @@ -29,25 +30,50 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(kernel_thread); +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) +EXPORT_SYMBOL(clear_user_page); +#endif + +#ifndef CONFIG_CACHE_OFF +EXPORT_SYMBOL(flush_dcache_page); +#endif + /* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_nocheck); +#ifdef CONFIG_IPV6 +EXPORT_SYMBOL(csum_ipv6_magic); +#endif #ifdef CONFIG_VT EXPORT_SYMBOL(screen_info); #endif +EXPORT_SYMBOL(__put_user_asm_b); +EXPORT_SYMBOL(__put_user_asm_w); EXPORT_SYMBOL(__put_user_asm_l); +EXPORT_SYMBOL(__put_user_asm_q); +EXPORT_SYMBOL(__get_user_asm_b); +EXPORT_SYMBOL(__get_user_asm_w); EXPORT_SYMBOL(__get_user_asm_l); +EXPORT_SYMBOL(__get_user_asm_q); +EXPORT_SYMBOL(__strnlen_user); +EXPORT_SYMBOL(__strncpy_from_user); +EXPORT_SYMBOL(clear_page); +EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); +EXPORT_SYMBOL(__const_udelay); /* Ugh. These come in from libgcc.a at link time. */ #define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) DECLARE_EXPORT(__sdivsi3); +DECLARE_EXPORT(__sdivsi3_2); DECLARE_EXPORT(__muldi3); DECLARE_EXPORT(__udivsi3); +DECLARE_EXPORT(__div_table); diff --git a/arch/sh/kernel/sys_sh64.c b/arch/sh/kernel/sys_sh64.c index 578004d71e02..91fb8445a5a0 100644 --- a/arch/sh/kernel/sys_sh64.c +++ b/arch/sh/kernel/sys_sh64.c @@ -31,23 +31,6 @@ #include <asm/unistd.h> /* - * sys_pipe() is the normal C calling standard for creating - * a pipe. It's not the way Unix traditionally does this, though. - */ -asmlinkage int sys_pipe(unsigned long * fildes) -{ - int fd[2]; - int error; - - error = do_pipe(fd); - if (!error) { - if (copy_to_user(fildes, fd, 2*sizeof(int))) - error = -EFAULT; - } - return error; -} - -/* * Do a system call from kernel instead of calling sys_execve so we * end up with proper pt_regs. */ diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 898977ee2030..022a55f1c1d4 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -172,6 +172,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_sec = sec; tv->tv_usec = usec; } +EXPORT_SYMBOL(do_gettimeofday); int do_settimeofday(struct timespec *tv) { @@ -240,7 +241,7 @@ static inline void do_timer_interrupt(void) * the irq version of write_lock because as just said we have irq * locally disabled. -arca */ - write_lock(&xtime_lock); + write_seqlock(&xtime_lock); asm ("getcon cr62, %0" : "=r" (current_ctc)); ctc_last_interrupt = (unsigned long) current_ctc; @@ -266,7 +267,7 @@ static inline void do_timer_interrupt(void) /* do it again in 60 s */ last_rtc_update = xtime.tv_sec - 600; } - write_unlock(&xtime_lock); + write_sequnlock(&xtime_lock); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index a3bdc68ef02c..438f1ebcc453 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -4,6 +4,7 @@ #include <linux/kdebug.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/uaccess.h> #include <asm/system.h> #ifdef CONFIG_BUG @@ -21,7 +22,14 @@ static void handle_BUG(struct pt_regs *regs) int is_valid_bugaddr(unsigned long addr) { - return addr >= PAGE_OFFSET; + unsigned short opcode; + + if (addr < PAGE_OFFSET) + return 0; + if (probe_kernel_address((u16 *)addr, opcode)) + return 0; + + return opcode == TRAPA_BUG_OPCODE; } #endif diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S index 560bc17eebdd..459fa92a7c53 100644 --- a/arch/sh/lib/memcpy-sh4.S +++ b/arch/sh/lib/memcpy-sh4.S @@ -126,10 +126,10 @@ mov.l r3,@-r0 ! 30 LS #else -3: mov r1,r3 ! OPQR +3: mov r7,r3 ! OPQR shlr8 r3 ! xOPQ - mov.l @(r0,r5),r1 ! KLMN - mov r1,r6 + mov.l @(r0,r5),r7 ! KLMN + mov r7,r6 shll16 r6 shll8 r6 ! Nxxx or r6,r3 ! NOPQ @@ -733,24 +733,24 @@ ENTRY(memcpy) movca.l r0,@r1 ! 40 LS (latency=3-7) add #-0x1c, r1 ! 50 EX - mov.l r3, @(0x1c,r1) ! 33 LS + mov.l r3, @(0x18,r1) ! 33 LS xtrct r11, r10 ! 48 EX - mov.l r6, @(0x18,r1) ! 33 LS + mov.l r6, @(0x14,r1) ! 33 LS xtrct r12, r11 ! 48 EX - mov.l r7, @(0x14,r1) ! 33 LS + mov.l r7, @(0x10,r1) ! 33 LS - mov.l r8, @(0x10,r1) ! 33 LS - add #-0x3e, r5 ! 50 EX + mov.l r8, @(0x0c,r1) ! 33 LS + add #-0x1e, r5 ! 50 EX - mov.l r9, @(0x0c,r1) ! 33 LS + mov.l r9, @(0x08,r1) ! 33 LS cmp/eq r2,r1 ! 54 MT - mov.l r10, @(0x08,r1) ! 33 LS + mov.l r10, @(0x04,r1) ! 33 LS bf/s 2b ! 109 BR - mov.l r11, @(0x04,r1) ! 33 LS + mov.l r11, @(0x00,r1) ! 33 LS #endif mov.l @r15+, r12 diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c index 75825ef6e084..2fb8eaf6de60 100644 --- a/arch/sh/lib64/dbg.c +++ b/arch/sh/lib64/dbg.c @@ -186,8 +186,8 @@ void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs) rr->pc = regs->pc; if (sp < stack_bottom + 3092) { - printk("evt_debug : stack underflow report\n"); int i, j; + printk("evt_debug : stack underflow report\n"); for (j=0, i = event_ptr; j<16; j++) { rr = event_ring + i; printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n", diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64 index cbd6aa33c5ac..0d92a8a3ac9a 100644 --- a/arch/sh/mm/Makefile_64 +++ b/arch/sh/mm/Makefile_64 @@ -2,10 +2,11 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o extable_64.o consistent.o +obj-y := init.o consistent.o -mmu-y := tlb-nommu.o pg-nommu.o -mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o +mmu-y := tlb-nommu.o pg-nommu.o extable_32.o +mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \ + extable_64.o ifndef CONFIG_CACHE_OFF obj-y += cache-sh5.o diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c index 3877321fcede..9e277ec7d536 100644 --- a/arch/sh/mm/cache-sh5.c +++ b/arch/sh/mm/cache-sh5.c @@ -714,6 +714,7 @@ void flush_cache_sigtramp(unsigned long vaddr) sh64_icache_inv_current_user_range(vaddr, end); } +#ifdef CONFIG_MMU /* * These *MUST* lie in an area of virtual address space that's otherwise * unused. @@ -830,3 +831,4 @@ void clear_user_page(void *to, unsigned long address, struct page *page) else sh64_clear_user_page_coloured(to, address); } +#endif diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index cea224c3e49b..6e0be24d26e2 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -343,6 +343,7 @@ unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *n return shmedia_alloc_io(phys, size, name); } +EXPORT_SYMBOL(onchip_remap); void onchip_unmap(unsigned long vaddr) { @@ -370,6 +371,7 @@ void onchip_unmap(unsigned long vaddr) kfree(res); } } +EXPORT_SYMBOL(onchip_unmap); #ifdef CONFIG_PROC_FS static int diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index 2de7302724fc..1663199ce888 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -59,7 +59,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) free_pfn = start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; - add_active_range(nid, start_pfn, end_pfn); + __add_active_range(nid, start_pfn, end_pfn); /* Node-local pgdat */ NODE_DATA(nid) = pfn_to_kaddr(free_pfn); diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 987c6682bf99..1bba7d36be90 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -28,7 +28,6 @@ HD64465 HD64465 7751SYSTEMH SH_7751_SYSTEMH HP6XX SH_HP6XX DREAMCAST SH_DREAMCAST -MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 EDOSK7705 SH_EDOSK7705 SH4202_MICRODEV SH_SH4202_MICRODEV |