25 files changed, 56 insertions, 191 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0665ac0add0b..9652d367fc37 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -4,7 +4,6 @@ config SUPERH
 	select ARCH_32BIT_OFF_T
 	select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
 	select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select ARCH_HAS_BINFMT_FLAT if !MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
@@ -21,10 +20,14 @@ config SUPERH
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_SHOW
+	select GENERIC_LIB_ASHLDI3
+	select GENERIC_LIB_ASHRDI3
+	select GENERIC_LIB_LSHRDI3
 	select GENERIC_PCI_IOMAP if PCI
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GUP_GET_PXX_LOW_HIGH if X2TLB
+	select HAS_IOPORT if HAS_IOPORT_MAP
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index fff419f3d757..336c54369636 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -85,7 +85,7 @@ config CPU_HAS_SR_RB
 	  that are lacking this bit must have another method in place for
 	  accomplishing what is taken care of by the banked registers.
 
-	  See <file:Documentation/sh/register-banks.rst> for further
+	  See <file:Documentation/arch/sh/register-banks.rst> for further
 	  information on SR.RB and register banking in the kernel in general.
 
 config CPU_HAS_PTEAEX
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 10290e5c1f43..c449e7c1b20f 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -15,7 +15,7 @@ config SH_STANDARD_BIOS
 
 config STACK_DEBUG
 	bool "Check for stack overflows"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && PRINTK
 	help
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit. Saying Y here will add overhead to
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 83bcb6d2daca..fafe15d3ba1d 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -358,7 +358,6 @@ config SH_SH2007
 	  intended for embedded applications.
 	  It has an Ethernet interface (SMC9118), direct connected
 	  Compact Flash socket, two serial ports and PC-104 bus.
-	  More information at <http://sh2000.sh-linux.org>.
 
 config SH_APSH4A3A
 	bool "AP-SH4A-3A"
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 56bd386ff3b0..75de893152af 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -21,6 +21,7 @@
 #include <linux/sh_intc.h>
 #include <mach/magicpanelr2.h>
 #include <asm/heartbeat.h>
+#include <cpu/gpio.h>
 #include <cpu/sh7720.h>
 
 /* Dummy supplies, where voltage doesn't matter */
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index c77b5f00a66a..151792162152 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -411,16 +412,16 @@ static int __init ap325rxa_devices_setup(void)
 	/* LD3 and LD4 LEDs */
 	gpio_request(GPIO_PTX5, NULL); /* RUN */
 	gpio_direction_output(GPIO_PTX5, 1);
-	gpio_export(GPIO_PTX5, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTX5), 0);
 
 	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
 	gpio_direction_output(GPIO_PTX4, 0);
-	gpio_export(GPIO_PTX4, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTX4), 0);
 
 	/* SW1 input */
 	gpio_request(GPIO_PTF7, NULL); /* MODE */
 	gpio_direction_input(GPIO_PTF7);
-	gpio_export(GPIO_PTF7, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTF7), 0);
 
 	/* LCDC */
 	gpio_request(GPIO_FN_LCDD15, NULL);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 95b85f2e13dd..ca2802d30565 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -16,7 +16,7 @@
 #include <linux/input.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio_keys.h>
 #include <mach/ilsel.h>
 #include <mach/hardware.h>
diff --git a/arch/sh/boot/compressed/ashldi3.c b/arch/sh/boot/compressed/ashldi3.c
index 7cebd646df83..7c1212170230 100644
--- a/arch/sh/boot/compressed/ashldi3.c
+++ b/arch/sh/boot/compressed/ashldi3.c
@@ -1,2 +1,2 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../lib/ashldi3.c"
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "../../../../lib/ashldi3.c"
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index b52e14ccb450..4d655e8d4d74 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -8,7 +8,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_FLATMEM_MANUAL=y
 CONFIG_SH_ECOVEC=y
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 8ef318150f84..431bc18f0a41 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -45,13 +45,19 @@ static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
 
 static int __init dma_subsys_init(void)
 {
+	struct device *dev_root;
 	int ret;
 
 	ret = subsys_system_register(&dma_subsys, NULL);
 	if (unlikely(ret))
 		return ret;
 
-	return device_create_file(dma_subsys.dev_root, &dev_attr_devices);
+	dev_root = bus_get_dev_root(&dma_subsys);
+	if (dev_root) {
+		ret = device_create_file(dev_root, &dev_attr_devices);
+		put_device(dev_root);
+	}
+	return ret;
 }
 postcore_initcall(dma_subsys_init);
 
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index b0c2a5238d04..a78b9a935585 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -31,7 +31,6 @@ struct sh7786_pcie_port {
 
 static struct sh7786_pcie_port *sh7786_pcie_ports;
 static unsigned int nr_ports;
-static unsigned long dma_pfn_offset;
 size_t memsize;
 u64 memstart;
 
@@ -140,12 +139,12 @@ static void sh7786_pci_fixup(struct pci_dev *dev)
 	 * Prevent enumeration of root complex resources.
 	 */
 	if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start	= 0;
-			dev->resource[i].end	= 0;
-			dev->resource[i].flags	= 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start	= 0;
+			r->end		= 0;
+			r->flags	= 0;
 		}
 	}
 }
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
deleted file mode 100644
index 588c1380e4cb..000000000000
--- a/arch/sh/include/asm/gpio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- *  include/asm-sh/gpio.h
- *
- * Generic GPIO API and pinmux table support for SuperH.
- *
- * Copyright (c) 2008 Magnus Damm
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_CPU_SH3)
-#include <cpu/gpio.h>
-#endif
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 27aebf1e75a2..3ef7adf739c8 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -50,6 +50,7 @@
 #define SR_FD		0x00008000
 #define SR_MD		0x40000000
 
+#define SR_USER_MASK	0x00000303	// M, Q, S, T bits
 /*
  * DSP structure and data
  */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index 68eb24ad2013..9b3fc923ee28 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_SH_TYPES_H
 #define __ASM_SH_TYPES_H
 
-#include <uapi/asm/types.h>
+#include <asm-generic/int-ll64.h>
 
 /*
  * These aren't exported outside the kernel to avoid name space clashes
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 27f2e3da5aa2..d289e99dc118 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -372,7 +372,6 @@ static struct subsys_interface sq_interface = {
 static int __init sq_api_init(void)
 {
 	unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
-	unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
 	int ret = -ENOMEM;
 
 	printk(KERN_NOTICE "sq: Registering store queue API.\n");
@@ -382,7 +381,7 @@ static int __init sq_api_init(void)
 	if (unlikely(!sq_cache))
 		return ret;
 
-	sq_bitmap = kzalloc(size, GFP_KERNEL);
+	sq_bitmap = bitmap_zalloc(nr_pages, GFP_KERNEL);
 	if (unlikely(!sq_bitmap))
 		goto out;
 
@@ -393,7 +392,7 @@ static int __init sq_api_init(void)
 	return 0;
 
 out:
-	kfree(sq_bitmap);
+	bitmap_free(sq_bitmap);
 	kmem_cache_destroy(sq_cache);
 
 	return ret;
@@ -402,7 +401,7 @@ out:
 static void __exit sq_api_exit(void)
 {
 	subsys_interface_unregister(&sq_interface);
-	kfree(sq_bitmap);
+	bitmap_free(sq_bitmap);
 	kmem_cache_destroy(sq_cache);
 }
 
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 4adbd4ade319..b603b7968b38 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -64,7 +64,7 @@ ENTRY(_stext)
 	ldc	r0, r6_bank
 #endif
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 	mov	r4, r12		! Store device tree blob pointer in r12
 #endif
 	
@@ -315,7 +315,7 @@ ENTRY(_stext)
 10:		
 #endif
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 	mov.l	8f, r0		! Make flat device tree available early.
 	jsr	@r0
 	 mov	r12, r4
@@ -346,7 +346,7 @@ ENTRY(stack_start)
 5:	.long	start_kernel
 6:	.long	cpu_init
 7:	.long	init_thread_union
-#if defined(CONFIG_OF_FLATTREE)
+#if defined(CONFIG_OF_EARLY_FLATTREE)
 8:	.long	sh_fdt_init
 #endif
 
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
index 11777867c6f5..a212b645b4cf 100644
--- a/arch/sh/kernel/nmi_debug.c
+++ b/arch/sh/kernel/nmi_debug.c
@@ -49,7 +49,7 @@ static int __init nmi_debug_setup(char *str)
 	register_die_notifier(&nmi_debug_nb);
 
 	if (*str != '=')
-		return 0;
+		return 1;
 
 	for (p = str + 1; *p; p = sep + 1) {
 		sep = strchr(p, ',');
@@ -70,6 +70,6 @@ static int __init nmi_debug_setup(char *str)
 			break;
 	}
 
-	return 0;
+	return 1;
 }
 __setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 1fcb6659822a..af977ec4ca5e 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -244,7 +244,7 @@ void __init __weak plat_early_device_setup(void)
 {
 }
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 void __ref sh_fdt_init(phys_addr_t dt_phys)
 {
 	static int done = 0;
@@ -326,7 +326,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Let earlyprintk output early console messages */
 	sh_early_platform_driver_probe("earlyprintk", 1, 1);
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 #ifdef CONFIG_USE_BUILTIN_DTB
 	unflatten_and_copy_device_tree();
 #else
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 90f495d35db2..a6bfc6f37491 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -115,6 +115,7 @@ static int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
 {
 	unsigned int err = 0;
+	unsigned int sr = regs->sr & ~SR_USER_MASK;
 
 #define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
 			COPY(regs[1]);
@@ -130,6 +131,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
 	COPY(sr);	COPY(pc);
 #undef COPY
 
+	regs->sr = (regs->sr & SR_USER_MASK) | sr;
+
 #ifdef CONFIG_SH_FPU
 	if (boot_cpu_data.flags & CPU_HAS_FPU) {
 		int owned_fp;
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index eb473d373ca4..d20a0768b31f 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -7,9 +7,7 @@ lib-y  = delay.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
 # Extracted from libgcc
-obj-y += movmem.o ashldi3.o ashrdi3.o lshrdi3.o \
-	 ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o \
-	 udiv_qrnnd.o
+obj-y += movmem.o ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o udiv_qrnnd.o
 
 udivsi3-y			:= udivsi3_i4i-Os.o
 
diff --git a/arch/sh/lib/ashldi3.c b/arch/sh/lib/ashldi3.c
deleted file mode 100644
index e5afe0935847..000000000000
--- a/arch/sh/lib/ashldi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashldi3(long long u, word_type b)
-{
-	DWunion uu, w;
-	word_type bm;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-	bm = 32 - b;
-
-	if (bm <= 0) {
-		w.s.low = 0;
-		w.s.high = (unsigned int) uu.s.low << -bm;
-	} else {
-		const unsigned int carries = (unsigned int) uu.s.low >> bm;
-
-		w.s.low = (unsigned int) uu.s.low << b;
-		w.s.high = ((unsigned int) uu.s.high << b) | carries;
-	}
-
-	return w.ll;
-}
-
-EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/sh/lib/ashrdi3.c b/arch/sh/lib/ashrdi3.c
deleted file mode 100644
index ae263fbf2538..000000000000
--- a/arch/sh/lib/ashrdi3.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashrdi3(long long u, word_type b)
-{
-	DWunion uu, w;
-	word_type bm;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-	bm = 32 - b;
-
-	if (bm <= 0) {
-		/* w.s.high = 1..1 or 0..0 */
-		w.s.high =
-		    uu.s.high >> 31;
-		w.s.low = uu.s.high >> -bm;
-	} else {
-		const unsigned int carries = (unsigned int) uu.s.high << bm;
-
-		w.s.high = uu.s.high >> b;
-		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
-
-EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/sh/lib/lshrdi3.c b/arch/sh/lib/lshrdi3.c
deleted file mode 100644
index 33eaa1edbc3c..000000000000
--- a/arch/sh/lib/lshrdi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __lshrdi3(long long u, word_type b)
-{
-	DWunion uu, w;
-	word_type bm;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-	bm = 32 - b;
-
-	if (bm <= 0) {
-		w.s.high = 0;
-		w.s.low = (unsigned int) uu.s.high >> -bm;
-	} else {
-		const unsigned int carries = (unsigned int) uu.s.high << bm;
-
-		w.s.high = (unsigned int) uu.s.high >> b;
-		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
-
-EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
index 784f541344f3..bda50762b3d3 100644
--- a/arch/sh/math-emu/sfp-util.h
+++ b/arch/sh/math-emu/sfp-util.h
@@ -67,7 +67,3 @@
   } while (0)
 
 #define abort()	return 0
-
-#define __BYTE_ORDER __LITTLE_ENDIAN
-
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 411fdc0901f7..511c17aede4a 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -19,28 +19,24 @@ config PAGE_OFFSET
 	default "0x00000000"
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	range 9 64 if PAGE_SIZE_16KB
-	default "9" if PAGE_SIZE_16KB
-	range 7 64 if PAGE_SIZE_64KB
-	default "7" if PAGE_SIZE_64KB
-	range 11 64
-	default "14" if !MMU
-	default "11"
+	int "Order of maximal physically contiguous allocations"
+	default "8" if PAGE_SIZE_16KB
+	default "6" if PAGE_SIZE_64KB
+	default "13" if !MMU
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
 	  The page size is not necessarily 4KB. Keep this in mind when
 	  choosing a value for this option.
 
+	  Don't change if unsure.
+
 config MEMORY_START
 	hex "Physical memory start address"
 	default "0x08000000"