diff options
Diffstat (limited to 'arch/x86/boot')
| -rw-r--r-- | arch/x86/boot/compressed/eboot.c | 10 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/head_32.S | 129 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/head_64.S | 112 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/kaslr.c | 147 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/misc.c | 3 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/pagetable.c | 7 | ||||
| -rw-r--r-- | arch/x86/boot/header.S | 8 |
7 files changed, 257 insertions, 159 deletions
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index c3e869eaef0c..926c2cc4facc 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -767,7 +767,7 @@ static efi_status_t setup_e820(struct boot_params *params, m |= (u64)efi->efi_memmap_hi << 32; #endif - d = (efi_memory_desc_t *)(m + (i * efi->efi_memdesc_size)); + d = efi_early_memdesc_ptr(m, efi->efi_memdesc_size, i); switch (d->type) { case EFI_RESERVED_TYPE: case EFI_RUNTIME_SERVICES_CODE: @@ -1058,7 +1058,7 @@ struct boot_params *efi_main(struct efi_config *c, desc->s = DESC_TYPE_CODE_DATA; desc->dpl = 0; desc->p = 1; - desc->limit = 0xf; + desc->limit1 = 0xf; desc->avl = 0; desc->l = 0; desc->d = SEG_OP_SIZE_32BIT; @@ -1078,7 +1078,7 @@ struct boot_params *efi_main(struct efi_config *c, desc->s = DESC_TYPE_CODE_DATA; desc->dpl = 0; desc->p = 1; - desc->limit = 0xf; + desc->limit1 = 0xf; desc->avl = 0; if (IS_ENABLED(CONFIG_X86_64)) { desc->l = 1; @@ -1099,7 +1099,7 @@ struct boot_params *efi_main(struct efi_config *c, desc->s = DESC_TYPE_CODE_DATA; desc->dpl = 0; desc->p = 1; - desc->limit = 0xf; + desc->limit1 = 0xf; desc->avl = 0; desc->l = 0; desc->d = SEG_OP_SIZE_32BIT; @@ -1116,7 +1116,7 @@ struct boot_params *efi_main(struct efi_config *c, desc->s = 0; desc->dpl = 0; desc->p = 1; - desc->limit = 0x0; + desc->limit1 = 0x0; desc->avl = 0; desc->l = 0; desc->d = 0; diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index d85b9625e836..11c68cf53d4e 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -61,71 +61,6 @@ __HEAD ENTRY(startup_32) -#ifdef CONFIG_EFI_STUB - jmp preferred_addr - - /* - * We don't need the return address, so set up the stack so - * efi_main() can find its arguments. - */ -ENTRY(efi_pe_entry) - add $0x4, %esp - - call 1f -1: popl %esi - subl $1b, %esi - - popl %ecx - movl %ecx, efi32_config(%esi) /* Handle */ - popl %ecx - movl %ecx, efi32_config+8(%esi) /* EFI System table pointer */ - - /* Relocate efi_config->call() */ - leal efi32_config(%esi), %eax - add %esi, 40(%eax) - pushl %eax - - call make_boot_params - cmpl $0, %eax - je fail - movl %esi, BP_code32_start(%eax) - popl %ecx - pushl %eax - pushl %ecx - jmp 2f /* Skip efi_config initialization */ - -ENTRY(efi32_stub_entry) - add $0x4, %esp - popl %ecx - popl %edx - - call 1f -1: popl %esi - subl $1b, %esi - - movl %ecx, efi32_config(%esi) /* Handle */ - movl %edx, efi32_config+8(%esi) /* EFI System table pointer */ - - /* Relocate efi_config->call() */ - leal efi32_config(%esi), %eax - add %esi, 40(%eax) - pushl %eax -2: - call efi_main - cmpl $0, %eax - movl %eax, %esi - jne 2f -fail: - /* EFI init failed, so hang. */ - hlt - jmp fail -2: - movl BP_code32_start(%esi), %eax - leal preferred_addr(%eax), %eax - jmp *%eax - -preferred_addr: -#endif cld /* * Test KEEP_SEGMENTS flag to see if the bootloader is asking @@ -208,6 +143,70 @@ preferred_addr: jmp *%eax ENDPROC(startup_32) +#ifdef CONFIG_EFI_STUB +/* + * We don't need the return address, so set up the stack so efi_main() can find + * its arguments. + */ +ENTRY(efi_pe_entry) + add $0x4, %esp + + call 1f +1: popl %esi + subl $1b, %esi + + popl %ecx + movl %ecx, efi32_config(%esi) /* Handle */ + popl %ecx + movl %ecx, efi32_config+8(%esi) /* EFI System table pointer */ + + /* Relocate efi_config->call() */ + leal efi32_config(%esi), %eax + add %esi, 40(%eax) + pushl %eax + + call make_boot_params + cmpl $0, %eax + je fail + movl %esi, BP_code32_start(%eax) + popl %ecx + pushl %eax + pushl %ecx + jmp 2f /* Skip efi_config initialization */ +ENDPROC(efi_pe_entry) + +ENTRY(efi32_stub_entry) + add $0x4, %esp + popl %ecx + popl %edx + + call 1f +1: popl %esi + subl $1b, %esi + + movl %ecx, efi32_config(%esi) /* Handle */ + movl %edx, efi32_config+8(%esi) /* EFI System table pointer */ + + /* Relocate efi_config->call() */ + leal efi32_config(%esi), %eax + add %esi, 40(%eax) + pushl %eax +2: + call efi_main + cmpl $0, %eax + movl %eax, %esi + jne 2f +fail: + /* EFI init failed, so hang. */ + hlt + jmp fail +2: + movl BP_code32_start(%esi), %eax + leal startup_32(%eax), %eax + jmp *%eax +ENDPROC(efi32_stub_entry) +#endif + .text relocated: diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index fbf4c32d0b62..b4a5d284391c 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -243,65 +243,6 @@ ENTRY(startup_64) * that maps our entire kernel(text+data+bss+brk), zero page * and command line. */ -#ifdef CONFIG_EFI_STUB - /* - * The entry point for the PE/COFF executable is efi_pe_entry, so - * only legacy boot loaders will execute this jmp. - */ - jmp preferred_addr - -ENTRY(efi_pe_entry) - movq %rcx, efi64_config(%rip) /* Handle */ - movq %rdx, efi64_config+8(%rip) /* EFI System table pointer */ - - leaq efi64_config(%rip), %rax - movq %rax, efi_config(%rip) - - call 1f -1: popq %rbp - subq $1b, %rbp - - /* - * Relocate efi_config->call(). - */ - addq %rbp, efi64_config+40(%rip) - - movq %rax, %rdi - call make_boot_params - cmpq $0,%rax - je fail - mov %rax, %rsi - leaq startup_32(%rip), %rax - movl %eax, BP_code32_start(%rsi) - jmp 2f /* Skip the relocation */ - -handover_entry: - call 1f -1: popq %rbp - subq $1b, %rbp - - /* - * Relocate efi_config->call(). - */ - movq efi_config(%rip), %rax - addq %rbp, 40(%rax) -2: - movq efi_config(%rip), %rdi - call efi_main - movq %rax,%rsi - cmpq $0,%rax - jne 2f -fail: - /* EFI init failed, so hang. */ - hlt - jmp fail -2: - movl BP_code32_start(%esi), %eax - leaq preferred_addr(%rax), %rax - jmp *%rax - -preferred_addr: -#endif /* Setup data segments. */ xorl %eax, %eax @@ -413,6 +354,59 @@ lvl5: jmp *%rax #ifdef CONFIG_EFI_STUB + +/* The entry point for the PE/COFF executable is efi_pe_entry. */ +ENTRY(efi_pe_entry) + movq %rcx, efi64_config(%rip) /* Handle */ + movq %rdx, efi64_config+8(%rip) /* EFI System table pointer */ + + leaq efi64_config(%rip), %rax + movq %rax, efi_config(%rip) + + call 1f +1: popq %rbp + subq $1b, %rbp + + /* + * Relocate efi_config->call(). + */ + addq %rbp, efi64_config+40(%rip) + + movq %rax, %rdi + call make_boot_params + cmpq $0,%rax + je fail + mov %rax, %rsi + leaq startup_32(%rip), %rax + movl %eax, BP_code32_start(%rsi) + jmp 2f /* Skip the relocation */ + +handover_entry: + call 1f +1: popq %rbp + subq $1b, %rbp + + /* + * Relocate efi_config->call(). + */ + movq efi_config(%rip), %rax + addq %rbp, 40(%rax) +2: + movq efi_config(%rip), %rdi + call efi_main + movq %rax,%rsi + cmpq $0,%rax + jne 2f +fail: + /* EFI init failed, so hang. */ + hlt + jmp fail +2: + movl BP_code32_start(%esi), %eax + leaq startup_64(%rax), %rax + jmp *%rax +ENDPROC(efi_pe_entry) + .org 0x390 ENTRY(efi64_stub_entry) movq %rdi, efi64_config(%rip) /* Handle */ diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c index 91f27ab970ef..17818ba6906f 100644 --- a/arch/x86/boot/compressed/kaslr.c +++ b/arch/x86/boot/compressed/kaslr.c @@ -37,7 +37,9 @@ #include <linux/uts.h> #include <linux/utsname.h> #include <linux/ctype.h> +#include <linux/efi.h> #include <generated/utsrelease.h> +#include <asm/efi.h> /* Macros used by the included decompressor code below. */ #define STATIC @@ -479,35 +481,31 @@ static unsigned long slots_fetch_random(void) return 0; } -static void process_e820_entry(struct boot_e820_entry *entry, +static void process_mem_region(struct mem_vector *entry, unsigned long minimum, unsigned long image_size) { struct mem_vector region, overlap; struct slot_area slot_area; unsigned long start_orig, end; - struct boot_e820_entry cur_entry; - - /* Skip non-RAM entries. */ - if (entry->type != E820_TYPE_RAM) - return; + struct mem_vector cur_entry; /* On 32-bit, ignore entries entirely above our maximum. */ - if (IS_ENABLED(CONFIG_X86_32) && entry->addr >= KERNEL_IMAGE_SIZE) + if (IS_ENABLED(CONFIG_X86_32) && entry->start >= KERNEL_IMAGE_SIZE) return; /* Ignore entries entirely below our minimum. */ - if (entry->addr + entry->size < minimum) + if (entry->start + entry->size < minimum) return; /* Ignore entries above memory limit */ - end = min(entry->size + entry->addr, mem_limit); - if (entry->addr >= end) + end = min(entry->size + entry->start, mem_limit); + if (entry->start >= end) return; - cur_entry.addr = entry->addr; - cur_entry.size = end - entry->addr; + cur_entry.start = entry->start; + cur_entry.size = end - entry->start; - region.start = cur_entry.addr; + region.start = cur_entry.start; region.size = cur_entry.size; /* Give up if slot area array is full. */ @@ -521,8 +519,8 @@ static void process_e820_entry(struct boot_e820_entry *entry, /* Potentially raise address to meet alignment needs. */ region.start = ALIGN(region.start, CONFIG_PHYSICAL_ALIGN); - /* Did we raise the address above this e820 region? */ - if (region.start > cur_entry.addr + cur_entry.size) + /* Did we raise the address above the passed in memory entry? */ + if (region.start > cur_entry.start + cur_entry.size) return; /* Reduce size by any delta from the original address. */ @@ -562,31 +560,126 @@ static void process_e820_entry(struct boot_e820_entry *entry, } } -static unsigned long find_random_phys_addr(unsigned long minimum, - unsigned long image_size) +#ifdef CONFIG_EFI +/* + * Returns true if mirror region found (and must have been processed + * for slots adding) + */ +static bool +process_efi_entries(unsigned long minimum, unsigned long image_size) { + struct efi_info *e = &boot_params->efi_info; + bool efi_mirror_found = false; + struct mem_vector region; + efi_memory_desc_t *md; + unsigned long pmap; + char *signature; + u32 nr_desc; int i; - unsigned long addr; - /* Check if we had too many memmaps. */ - if (memmap_too_large) { - debug_putstr("Aborted e820 scan (more than 4 memmap= args)!\n"); - return 0; + signature = (char *)&e->efi_loader_signature; + if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) && + strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) + return false; + +#ifdef CONFIG_X86_32 + /* Can't handle data above 4GB at this time */ + if (e->efi_memmap_hi) { + warn("EFI memmap is above 4GB, can't be handled now on x86_32. EFI should be disabled.\n"); + return false; } + pmap = e->efi_memmap; +#else + pmap = (e->efi_memmap | ((__u64)e->efi_memmap_hi << 32)); +#endif - /* Make sure minimum is aligned. */ - minimum = ALIGN(minimum, CONFIG_PHYSICAL_ALIGN); + nr_desc = e->efi_memmap_size / e->efi_memdesc_size; + for (i = 0; i < nr_desc; i++) { + md = efi_early_memdesc_ptr(pmap, e->efi_memdesc_size, i); + if (md->attribute & EFI_MEMORY_MORE_RELIABLE) { + efi_mirror_found = true; + break; + } + } + + for (i = 0; i < nr_desc; i++) { + md = efi_early_memdesc_ptr(pmap, e->efi_memdesc_size, i); + + /* + * Here we are more conservative in picking free memory than + * the EFI spec allows: + * + * According to the spec, EFI_BOOT_SERVICES_{CODE|DATA} are also + * free memory and thus available to place the kernel image into, + * but in practice there's firmware where using that memory leads + * to crashes. + * + * Only EFI_CONVENTIONAL_MEMORY is guaranteed to be free. + */ + if (md->type != EFI_CONVENTIONAL_MEMORY) + continue; + + if (efi_mirror_found && + !(md->attribute & EFI_MEMORY_MORE_RELIABLE)) + continue; + + region.start = md->phys_addr; + region.size = md->num_pages << EFI_PAGE_SHIFT; + process_mem_region(®ion, minimum, image_size); + if (slot_area_index == MAX_SLOT_AREA) { + debug_putstr("Aborted EFI scan (slot_areas full)!\n"); + break; + } + } + return true; +} +#else +static inline bool +process_efi_entries(unsigned long minimum, unsigned long image_size) +{ + return false; +} +#endif + +static void process_e820_entries(unsigned long minimum, + unsigned long image_size) +{ + int i; + struct mem_vector region; + struct boot_e820_entry *entry; /* Verify potential e820 positions, appending to slots list. */ for (i = 0; i < boot_params->e820_entries; i++) { - process_e820_entry(&boot_params->e820_table[i], minimum, - image_size); + entry = &boot_params->e820_table[i]; + /* Skip non-RAM entries. */ + if (entry->type != E820_TYPE_RAM) + continue; + region.start = entry->addr; + region.size = entry->size; + process_mem_region(®ion, minimum, image_size); if (slot_area_index == MAX_SLOT_AREA) { debug_putstr("Aborted e820 scan (slot_areas full)!\n"); break; } } +} + +static unsigned long find_random_phys_addr(unsigned long minimum, + unsigned long image_size) +{ + /* Check if we had too many memmaps. */ + if (memmap_too_large) { + debug_putstr("Aborted memory entries scan (more than 4 memmap= args)!\n"); + return 0; + } + + /* Make sure minimum is aligned. */ + minimum = ALIGN(minimum, CONFIG_PHYSICAL_ALIGN); + + if (process_efi_entries(minimum, image_size)) + return slots_fetch_random(); + process_e820_entries(minimum, image_size); return slots_fetch_random(); } @@ -645,7 +738,7 @@ void choose_random_location(unsigned long input, */ min_addr = min(*output, 512UL << 20); - /* Walk e820 and find a random address. */ + /* Walk available memory entries to find a random address. */ random_addr = find_random_phys_addr(min_addr, output_size); if (!random_addr) { warn("Physical KASLR disabled: no suitable memory region!"); diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index a0838ab929f2..c14217cd0155 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -116,8 +116,7 @@ void __putstr(const char *s) } } - if (boot_params->screen_info.orig_video_mode == 0 && - lines == 0 && cols == 0) + if (lines == 0 || cols == 0) return; x = boot_params->screen_info.orig_x; diff --git a/arch/x86/boot/compressed/pagetable.c b/arch/x86/boot/compressed/pagetable.c index 28029be47fbb..f1aa43854bed 100644 --- a/arch/x86/boot/compressed/pagetable.c +++ b/arch/x86/boot/compressed/pagetable.c @@ -15,6 +15,13 @@ #define __pa(x) ((unsigned long)(x)) #define __va(x) ((void *)((unsigned long)(x))) +/* + * The pgtable.h and mm/ident_map.c includes make use of the SME related + * information which is not used in the compressed image support. Un-define + * the SME support to avoid any compile and link errors. + */ +#undef CONFIG_AMD_MEM_ENCRYPT + #include "misc.h" /* These actually do the work of building the kernel identity maps. */ diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 2ed8f0c25def..1bb08ecffd24 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -520,8 +520,14 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr # the description in lib/decompressor_xxx.c for specific information. # # extra_bytes = (uncompressed_size >> 12) + 65536 + 128 +# +# LZ4 is even worse: data that cannot be further compressed grows by 0.4%, +# or one byte per 256 bytes. OTOH, we can safely get rid of the +128 as +# the size-dependent part now grows so fast. +# +# extra_bytes = (uncompressed_size >> 8) + 65536 -#define ZO_z_extra_bytes ((ZO_z_output_len >> 12) + 65536 + 128) +#define ZO_z_extra_bytes ((ZO_z_output_len >> 8) + 65536) #if ZO_z_output_len > ZO_z_input_len # define ZO_z_extract_offset (ZO_z_output_len + ZO_z_extra_bytes - \ ZO_z_input_len) |