diff options
Diffstat (limited to 'arch/x86/kernel/apic')
| -rw-r--r-- | arch/x86/kernel/apic/Makefile | 5 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/apic.c | 193 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/hw_nmi.c | 36 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 119 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/nmi.c | 567 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/probe_64.c | 7 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/x2apic_uv_x.c | 67 |
7 files changed, 207 insertions, 787 deletions
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 910f20b457c4..3966b564ea47 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -3,10 +3,7 @@ # obj-$(CONFIG_X86_LOCAL_APIC) += apic.o apic_noop.o probe_$(BITS).o ipi.o -ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y) -obj-$(CONFIG_X86_LOCAL_APIC) += nmi.o -endif -obj-$(CONFIG_HARDLOCKUP_DETECTOR) += hw_nmi.o +obj-y += hw_nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o obj-$(CONFIG_SMP) += ipi.o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3f838d537392..79e6baa8aa0a 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -31,7 +31,6 @@ #include <linux/init.h> #include <linux/cpu.h> #include <linux/dmi.h> -#include <linux/nmi.h> #include <linux/smp.h> #include <linux/mm.h> @@ -432,17 +431,18 @@ int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask) reserved = reserve_eilvt_offset(offset, new); if (reserved != new) { - pr_err(FW_BUG "cpu %d, try to setup vector 0x%x, but " - "vector 0x%x was already reserved by another core, " - "APIC%lX=0x%x\n", - smp_processor_id(), new, reserved, reg, old); + pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " + "vector 0x%x, but the register is already in use for " + "vector 0x%x on another cpu\n", + smp_processor_id(), reg, offset, new, reserved); return -EINVAL; } if (!eilvt_entry_is_changeable(old, new)) { - pr_err(FW_BUG "cpu %d, try to setup vector 0x%x but " - "register already in use, APIC%lX=0x%x\n", - smp_processor_id(), new, reg, old); + pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " + "vector 0x%x, but the register is already in use for " + "vector 0x%x on this cpu\n", + smp_processor_id(), reg, offset, new, old); return -EBUSY; } @@ -516,7 +516,7 @@ static void __cpuinit setup_APIC_timer(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); - if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) { + if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) { lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP; /* Make LAPIC timer preferrable over percpu HPET */ lapic_clockevent.rating = 150; @@ -799,11 +799,7 @@ void __init setup_boot_APIC_clock(void) * PIT/HPET going. Otherwise register lapic as a dummy * device. */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - pr_warning("APIC timer registered as dummy," - " due to nmi_watchdog=%d!\n", nmi_watchdog); + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; /* Setup the lapic or request the broadcast */ setup_APIC_timer(); @@ -1195,12 +1191,15 @@ static void __cpuinit lapic_setup_esr(void) oldvalue, value); } - /** * setup_local_APIC - setup the local APIC + * + * Used to setup local APIC while initializing BSP or bringin up APs. + * Always called with preemption disabled. */ void __cpuinit setup_local_APIC(void) { + int cpu = smp_processor_id(); unsigned int value, queued; int i, j, acked = 0; unsigned long long tsc = 0, ntsc; @@ -1225,8 +1224,6 @@ void __cpuinit setup_local_APIC(void) #endif perf_events_lapic_init(); - preempt_disable(); - /* * Double-check whether this APIC is really registered. * This is meaningless in clustered apic mode, so we skip it. @@ -1342,21 +1339,19 @@ void __cpuinit setup_local_APIC(void) * TODO: set up through-local-APIC from through-I/O-APIC? --macro */ value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && (pic_mode || !value)) { + if (!cpu && (pic_mode || !value)) { value = APIC_DM_EXTINT; - apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", - smp_processor_id()); + apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu); } else { value = APIC_DM_EXTINT | APIC_LVT_MASKED; - apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", - smp_processor_id()); + apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", cpu); } apic_write(APIC_LVT0, value); /* * only the BP should see the LINT1 NMI signal, obviously. */ - if (!smp_processor_id()) + if (!cpu) value = APIC_DM_NMI; else value = APIC_DM_NMI | APIC_LVT_MASKED; @@ -1364,11 +1359,9 @@ void __cpuinit setup_local_APIC(void) value |= APIC_LVT_LEVEL_TRIGGER; apic_write(APIC_LVT1, value); - preempt_enable(); - #ifdef CONFIG_X86_MCE_INTEL /* Recheck CMCI information after local APIC is up on CPU #0 */ - if (smp_processor_id() == 0) + if (!cpu) cmci_recheck(); #endif } @@ -1387,8 +1380,15 @@ void __cpuinit end_local_APIC_setup(void) } #endif - setup_apic_nmi_watchdog(NULL); apic_pm_activate(); + + /* + * Now that local APIC setup is completed for BP, configure the fault + * handling for interrupt remapping. + */ + if (!smp_processor_id() && intr_remapping_enabled) + enable_drhd_fault_handling(); + } #ifdef CONFIG_X86_X2APIC @@ -1530,13 +1530,60 @@ static int __init detect_init_APIC(void) return 0; } #else + +static int apic_verify(void) +{ + u32 features, h, l; + + /* + * The APIC feature bit should now be enabled + * in `cpuid' + */ + features = cpuid_edx(1); + if (!(features & (1 << X86_FEATURE_APIC))) { + pr_warning("Could not enable APIC!\n"); + return -1; + } + set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* The BIOS may have set up the APIC at some other address */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + + pr_info("Found and enabled local APIC!\n"); + return 0; +} + +int apic_force_enable(void) +{ + u32 h, l; + + if (disable_apic) + return -1; + + /* + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. + */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } + return apic_verify(); +} + /* * Detect and initialize APIC */ static int __init detect_init_APIC(void) { - u32 h, l, features; - /* Disabled by kernel option? */ if (disable_apic) return -1; @@ -1566,38 +1613,12 @@ static int __init detect_init_APIC(void) "you can enable it with \"lapic\"\n"); return -1; } - /* - * Some BIOSes disable the local APIC in the APIC_BASE - * MSR. This can only be done in software for Intel P6 or later - * and AMD K7 (Model > 1) or later. - */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - pr_info("Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; - } - } - /* - * The APIC feature bit should now be enabled - * in `cpuid' - */ - features = cpuid_edx(1); - if (!(features & (1 << X86_FEATURE_APIC))) { - pr_warning("Could not enable APIC!\n"); - return -1; + if (apic_force_enable()) + return -1; + } else { + if (apic_verify()) + return -1; } - set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - - pr_info("Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1609,28 +1630,6 @@ no_apic: } #endif -#ifdef CONFIG_X86_64 -void __init early_init_lapic_mapping(void) -{ - /* - * If no local APIC can be found then go out - * : it means there is no mpatable and MADT - */ - if (!smp_found_config) - return; - - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, mp_lapic_addr); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - boot_cpu_physical_apicid = read_apic_id(); -} -#endif - /** * init_apic_mappings - initialize APIC mappings */ @@ -1656,10 +1655,7 @@ void __init init_apic_mappings(void) * acpi_register_lapic_address() */ if (!acpi_lapic && !smp_found_config) - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - - apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", - APIC_BASE, apic_phys); + register_lapic_address(apic_phys); } /* @@ -1681,11 +1677,27 @@ void __init init_apic_mappings(void) } } +void __init register_lapic_address(unsigned long address) +{ + mp_lapic_addr = address; + + if (!x2apic_mode) { + set_fixmap_nocache(FIX_APIC_BASE, address); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, mp_lapic_addr); + } + if (boot_cpu_physical_apicid == -1U) { + boot_cpu_physical_apicid = read_apic_id(); + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); + } +} + /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ -int apic_version[MAX_APICS]; +int apic_version[MAX_LOCAL_APIC]; int __init APIC_init_uniprocessor(void) { @@ -1750,17 +1762,10 @@ int __init APIC_init_uniprocessor(void) setup_IO_APIC(); else { nr_ioapics = 0; - localise_nmi_watchdog(); } -#else - localise_nmi_watchdog(); #endif x86_init.timers.setup_percpu_clockev(); -#ifdef CONFIG_X86_64 - check_nmi_watchdog(); -#endif - return 0; } diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index 62f6e1e55b90..72ec29e1ae06 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -17,20 +17,31 @@ #include <linux/nmi.h> #include <linux/module.h> +#ifdef CONFIG_HARDLOCKUP_DETECTOR u64 hw_nmi_get_sample_period(void) { return (u64)(cpu_khz) * 1000 * 60; } +#endif -#ifdef ARCH_HAS_NMI_WATCHDOG - +#ifdef arch_trigger_all_cpu_backtrace /* For reliability, we're prepared to waste bits here. */ static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; +/* "in progress" flag of arch_trigger_all_cpu_backtrace */ +static unsigned long backtrace_flag; + void arch_trigger_all_cpu_backtrace(void) { int i; + if (test_and_set_bit(0, &backtrace_flag)) + /* + * If there is already a trigger_all_cpu_backtrace() in progress + * (backtrace_flag == 1), don't output double cpu dump infos. + */ + return; + cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask); printk(KERN_INFO "sending NMI to all CPUs:\n"); @@ -42,6 +53,9 @@ void arch_trigger_all_cpu_backtrace(void) break; mdelay(1); } + + clear_bit(0, &backtrace_flag); + smp_mb__after_clear_bit(); } static int __kprobes @@ -50,7 +64,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, { struct die_args *args = __args; struct pt_regs *regs; - int cpu = smp_processor_id(); + int cpu; switch (cmd) { case DIE_NMI: @@ -62,6 +76,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, } regs = args->regs; + cpu = smp_processor_id(); if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) { static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED; @@ -91,18 +106,3 @@ static int __init register_trigger_all_cpu_backtrace(void) } early_initcall(register_trigger_all_cpu_backtrace); #endif - -/* STUB calls to mimic old nmi_watchdog behaviour */ -#if defined(CONFIG_X86_LOCAL_APIC) -unsigned int nmi_watchdog = NMI_NONE; -EXPORT_SYMBOL(nmi_watchdog); -void acpi_nmi_enable(void) { return; } -void acpi_nmi_disable(void) { return; } -#endif -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -EXPORT_SYMBOL(nmi_active); -int unknown_nmi_panic; -void cpu_nmi_set_wd_enabled(void) { return; } -void stop_apic_nmi_watchdog(void *unused) { return; } -void setup_apic_nmi_watchdog(void *unused) { return; } -int __init check_nmi_watchdog(void) { return 0; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7cc0a721f628..697dc34b7b87 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -54,7 +54,6 @@ #include <asm/dma.h> #include <asm/timer.h> #include <asm/i8259.h> -#include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> #include <asm/setup.h> @@ -126,6 +125,26 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); +/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ +void mp_save_irq(struct mpc_intsrc *m) +{ + int i; + + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, + m->srcbusirq, m->dstapic, m->dstirq); + + for (i = 0; i < mp_irq_entries; i++) { + if (!memcmp(&mp_irqs[i], m, sizeof(*m))) + return; + } + + memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + struct irq_pin_list { int apic, pin; struct irq_pin_list *next; @@ -136,6 +155,7 @@ static struct irq_pin_list *alloc_irq_pin_list(int node) return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node); } + /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ #ifdef CONFIG_SPARSE_IRQ static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY]; @@ -1934,8 +1954,7 @@ void disable_IO_APIC(void) * * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ - -void __init setup_ioapic_ids_from_mpc(void) +void __init setup_ioapic_ids_from_mpc_nocheck(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; @@ -1944,15 +1963,6 @@ void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; - if (acpi_ioapic) - return; - /* - * Don't check I/O APIC IDs for xAPIC systems. They have - * no meaning without the serial APIC bus. - */ - if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return; /* * This is broken; anything with a real cpu count has to * circumvent this idiocy regardless. @@ -2006,7 +2016,6 @@ void __init setup_ioapic_ids_from_mpc(void) physids_or(phys_id_present_map, phys_id_present_map, tmp); } - /* * We need to adjust the IRQ routing table * if the ID changed. @@ -2018,9 +2027,12 @@ void __init setup_ioapic_ids_from_mpc(void) = mp_ioapics[apic_id].apicid; /* - * Read the right value from the MPC table and - * write it into the ID register. + * Update the ID register according to the right value + * from the MPC table if they are different. */ + if (mp_ioapics[apic_id].apicid == reg_00.bits.ID) + continue; + apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mp_ioapics[apic_id].apicid); @@ -2042,6 +2054,21 @@ void __init setup_ioapic_ids_from_mpc(void) apic_printk(APIC_VERBOSE, " ok.\n"); } } + +void __init setup_ioapic_ids_from_mpc(void) +{ + + if (acpi_ioapic) + return; + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + setup_ioapic_ids_from_mpc_nocheck(); +} #endif int no_timer_check __initdata; @@ -2302,7 +2329,7 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void) unsigned int irr; struct irq_desc *desc; struct irq_cfg *cfg; - irq = __get_cpu_var(vector_irq)[vector]; + irq = __this_cpu_read(vector_irq[vector]); if (irq == -1) continue; @@ -2336,7 +2363,7 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void) apic->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR); goto unlock; } - __get_cpu_var(vector_irq)[vector] = -1; + __this_cpu_write(vector_irq[vector], -1); unlock: raw_spin_unlock(&desc->lock); } @@ -2430,13 +2457,12 @@ static void ack_apic_level(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; int i, do_unmask_irq = 0, irq = data->irq; - struct irq_desc *desc = irq_to_desc(irq); unsigned long v; irq_complete_move(cfg); #ifdef CONFIG_GENERIC_PENDING_IRQ /* If we are moving the irq we need to mask it */ - if (unlikely(desc->status & IRQ_MOVE_PENDING)) { + if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) { do_unmask_irq = 1; mask_ioapic(cfg); } @@ -2643,24 +2669,6 @@ static void lapic_register_intr(int irq) "edge"); } -static void __init setup_nmi(void) -{ - /* - * Dirty trick to enable the NMI watchdog ... - * We put the 8259A master into AEOI mode and - * unmask on all local APICs LVT0 as NMI. - * - * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') - * is from Maciej W. Rozycki - so we do not have to EOI from - * the NMI handler or the timer interrupt. - */ - apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); - - enable_NMI_through_LVT0(); - - apic_printk(APIC_VERBOSE, " done.\n"); -} - /* * This looks a bit hackish but it's about the only one way of sending * a few INTA cycles to 8259As and any associated glue logic. ICR does @@ -2766,15 +2774,6 @@ static inline void __init check_timer(void) */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); legacy_pic->init(1); -#ifdef CONFIG_X86_32 - { - unsigned int ver; - - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); - } -#endif pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2822,10 +2821,6 @@ static inline void __init check_timer(void) unmask_ioapic(cfg); } if (timer_irq_works()) { - if (nmi_watchdog == NMI_IO_APIC) { - setup_nmi(); - legacy_pic->unmask(0); - } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); goto out; @@ -2851,11 +2846,6 @@ static inline void __init check_timer(void) if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); timer_through_8259 = 1; - if (nmi_watchdog == NMI_IO_APIC) { - legacy_pic->mask(0); - setup_nmi(); - legacy_pic->unmask(0); - } goto out; } /* @@ -2867,15 +2857,6 @@ static inline void __init check_timer(void) apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } - if (nmi_watchdog == NMI_IO_APIC) { - apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " - "through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = NMI_NONE; - } -#ifdef CONFIG_X86_32 - timer_ack = 0; -#endif - apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...\n"); @@ -3413,6 +3394,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, msg.data |= MSI_DATA_VECTOR(cfg->vector); msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; msg.address_lo |= MSI_ADDR_DEST_ID(dest); + msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest); dmar_msi_write(irq, &msg); @@ -3639,7 +3621,7 @@ int __init io_apic_get_redir_entries (int ioapic) return reg_01.bits.entries + 1; } -void __init probe_nr_irqs_gsi(void) +static void __init probe_nr_irqs_gsi(void) { int nr; @@ -3956,7 +3938,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics) return res; } -void __init ioapic_init_mappings(void) +void __init ioapic_and_gsi_init(void) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; struct resource *ioapic_res; @@ -3994,6 +3976,8 @@ fake_ioapic_page: ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; ioapic_res++; } + + probe_nr_irqs_gsi(); } void __init ioapic_insert_resources(void) @@ -4103,7 +4087,8 @@ void __init pre_init_apic_IRQ0(void) printk(KERN_INFO "Early APIC setup for system timer0\n"); #ifndef CONFIG_SMP - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, + &phys_cpu_present_map); #endif /* Make sure the irq descriptor is set up */ cfg = alloc_irq_and_cfg_at(0, 0); diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c deleted file mode 100644 index c90041ccb742..000000000000 --- a/arch/x86/kernel/apic/nmi.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar <mingo@redhat.com> - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include <asm/apic.h> - -#include <linux/nmi.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/sysdev.h> -#include <linux/sysctl.h> -#include <linux/percpu.h> -#include <linux/kprobes.h> -#include <linux/cpumask.h> -#include <linux/kernel_stat.h> -#include <linux/kdebug.h> -#include <linux/smp.h> - -#include <asm/i8259.h> -#include <asm/io_apic.h> -#include <asm/proto.h> -#include <asm/timer.h> - -#include <asm/mce.h> - -#include <asm/mach_traps.h> - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -/* For reliability, we're prepared to waste bits here. */ -static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -EXPORT_SYMBOL(nmi_active); - -unsigned int nmi_watchdog = NMI_NONE; -EXPORT_SYMBOL(nmi_watchdog); - -static int panic_on_timeout; - -static unsigned int nmi_hz = HZ; -static DEFINE_PER_CPU(short, wd_enabled); -static int endflag __initdata; - -static inline unsigned int get_nmi_count(int cpu) -{ - return per_cpu(irq_stat, cpu).__nmi_count; -} - -static inline int mce_in_progress(void) -{ -#if defined(CONFIG_X86_MCE) - return atomic_read(&mce_entry) > 0; -#endif - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; -} - -#ifdef CONFIG_SMP -/* - * The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* - * Intentionally don't use cpu_relax here. This is - * to make sure that the performance counter really ticks, - * even if there is a simulator or similar that catches the - * pause instruction. On a real HT machine this is fine because - * all other CPUs are busy with "useless" delay loops and don't - * care if they get somewhat less cycles. - */ - while (endflag == 0) - mb(); -} -#endif - -static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count) -{ - printk(KERN_CONT "\n"); - - printk(KERN_WARNING - "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", - cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); - - printk(KERN_WARNING - "Please report this to bugzilla.kernel.org,\n"); - printk(KERN_WARNING - "and attach the output of the 'dmesg' command.\n"); - - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if (!nmi_watchdog_active() || !atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - goto error; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) - report_broken_nmi(cpu, prev_nmi_count); - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - goto error; - } - printk("OK.\n"); - - /* - * now that we know it works we can reduce NMI frequency to - * something more reasonable; makes a difference in some configs - */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -error: - if (nmi_watchdog == NMI_IO_APIC) { - if (!timer_through_8259) - legacy_pic->mask(0); - on_each_cpu(__acpi_nmi_disable, NULL, 1); - } - -#ifdef CONFIG_X86_32 - timer_ack = 0; -#endif - return -1; -} - -static int __init setup_nmi_watchdog(char *str) -{ - unsigned int nmi; - - if (!strncmp(str, "panic", 5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - if (!strncmp(str, "lapic", 5)) - nmi_watchdog = NMI_LOCAL_APIC; - else if (!strncmp(str, "ioapic", 6)) - nmi_watchdog = NMI_IO_APIC; - else { - get_option(&str, &nmi); - if (nmi >= NMI_INVALID) - return 0; - nmi_watchdog = nmi; - } - - return 1; -} -__setup("nmi_watchdog=", setup_nmi_watchdog); - -/* - * Suspend/resume support - */ -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* - * should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} - -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 1); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 1); -} - -/* - * This function is called as soon the LAPIC NMI watchdog driver has everything - * in place and it's ready to check if the NMIs belong to the NMI watchdog - */ -void cpu_nmi_set_wd_enabled(void) -{ - __get_cpu_var(wd_enabled) = 1; -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if (!nmi_watchdog_active()) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - else - __acpi_nmi_disable(NULL); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up here too!] - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(long, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog_active()) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - /* - * Tickle the softlockup detector too: - */ - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - /* - * Since current_thread_info()-> is always on the stack, and we - * always switch the stack NMI-atomically, it's safe to use - * smp_processor_id(). - */ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - /* We can be called before check_nmi_watchdog, hence NULL check. */ - if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) { - static DEFINE_RAW_SPINLOCK(lock); /* Serialise the printks */ - - raw_spin_lock(&lock); - printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); - show_regs(regs); - dump_stack(); - raw_spin_unlock(&lock); - cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask)); - - rc = 1; - } - - /* Could check oops_in_progress here too, but it's safer not to */ - if (mce_in_progress()) - touched = 1; - - /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - __this_cpu_inc(alert_counter); - if (__this_cpu_read(alert_counter) == 5 * nmi_hz) - /* - * die_nmi will return ONLY if NOTIFY_STOP happens.. - */ - die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - __this_cpu_write(alert_counter, 0); - } - - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* - * don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static void enable_ioapic_nmi_watchdog_single(void *unused) -{ - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - __acpi_nmi_enable(NULL); -} - -static void enable_ioapic_nmi_watchdog(void) -{ - on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1); - touch_nmi_watchdog(); -} - -static void disable_ioapic_nmi_watchdog(void) -{ - on_each_cpu(stop_apic_nmi_watchdog, NULL, 1); -} - -static int __init setup_unknown_nmi_panic(char *str) -{ - unknown_nmi_panic = 1; - return 1; -} -__setup("unknown_nmi_panic", setup_unknown_nmi_panic); - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) { - printk(KERN_WARNING - "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else if (nmi_watchdog == NMI_IO_APIC) { - if (nmi_watchdog_enabled) - enable_ioapic_nmi_watchdog(); - else - disable_ioapic_nmi_watchdog(); - } else { - printk(KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif /* CONFIG_SYSCTL */ - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void arch_trigger_all_cpu_backtrace(void) -{ - int i; - - cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask); - - printk(KERN_INFO "sending NMI to all CPUs:\n"); - apic->send_IPI_all(NMI_VECTOR); - - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpumask_empty(to_cpumask(backtrace_mask))) - break; - mdelay(1); - } -} diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index f9e4e6a54073..d8c4a6feb286 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void) /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; } - - /* - * Now that apic routing model is selected, configure the - * fault handling for intr remapping. - */ - if (intr_remapping_enabled) - enable_drhd_fault_handling(); } /* Same for both flat and physical. */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index c1c52c341f40..ecca5f41ad2c 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -48,6 +48,16 @@ unsigned int uv_apicid_hibits; EXPORT_SYMBOL_GPL(uv_apicid_hibits); static DEFINE_SPINLOCK(uv_nmi_lock); +static unsigned long __init uv_early_read_mmr(unsigned long addr) +{ + unsigned long val, *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | addr, sizeof(*mmr)); + val = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + return val; +} + static inline bool is_GRU_range(u64 start, u64 end) { return start >= gru_start_paddr && end <= gru_end_paddr; @@ -58,28 +68,24 @@ static bool uv_is_untracked_pat_range(u64 start, u64 end) return is_ISA_range(start, end) || is_GRU_range(start, end); } -static int early_get_nodeid(void) +static int __init early_get_pnodeid(void) { union uvh_node_id_u node_id; - unsigned long *mmr; - - mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); - node_id.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + union uvh_rh_gam_config_mmr_u m_n_config; + int pnode; /* Currently, all blades have same revision number */ + node_id.v = uv_early_read_mmr(UVH_NODE_ID); + m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR); uv_min_hub_revision_id = node_id.s.revision; - return node_id.s.node_id; + pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); + return pnode; } static void __init early_get_apic_pnode_shift(void) { - unsigned long *mmr; - - mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_APICID, sizeof(*mmr)); - uvh_apicid.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + uvh_apicid.v = uv_early_read_mmr(UVH_APICID); if (!uvh_apicid.v) /* * Old bios, use default value @@ -95,21 +101,17 @@ static void __init early_get_apic_pnode_shift(void) static void __init uv_set_apicid_hibit(void) { union uvh_lb_target_physical_apic_id_mask_u apicid_mask; - unsigned long *mmr; - mmr = early_ioremap(UV_LOCAL_MMR_BASE | - UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr)); - apicid_mask.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK); uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK; } static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - int nodeid; + int pnodeid; if (!strcmp(oem_id, "SGI")) { - nodeid = early_get_nodeid(); + pnodeid = early_get_pnodeid(); early_get_apic_pnode_shift(); x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range; x86_platform.nmi_init = uv_nmi_init; @@ -118,8 +120,8 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) else if (!strcmp(oem_table_id, "UVX")) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { - __get_cpu_var(x2apic_extra_bits) = - nodeid << (uvh_apicid.s.pnode_shift - 1); + __this_cpu_write(x2apic_extra_bits, + pnodeid << uvh_apicid.s.pnode_shift); uv_system_type = UV_NON_UNIQUE_APIC; uv_set_apicid_hibit(); return 1; @@ -284,7 +286,7 @@ static unsigned int x2apic_get_apic_id(unsigned long x) unsigned int id; WARN_ON(preemptible() && num_online_cpus() > 1); - id = x | __get_cpu_var(x2apic_extra_bits); + id = x | __this_cpu_read(x2apic_extra_bits); return id; } @@ -376,7 +378,7 @@ struct apic __refdata apic_x2apic_uv_x = { static __cpuinit void set_x2apic_extra_bits(int pnode) { - __get_cpu_var(x2apic_extra_bits) = (pnode << 6); + __this_cpu_write(x2apic_extra_bits, (pnode << 6)); } /* @@ -682,27 +684,32 @@ void uv_nmi_init(void) void __init uv_system_init(void) { union uvh_rh_gam_config_mmr_u m_n_config; + union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; union uvh_node_id_u node_id; unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; - int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val, n_io; int gnode_extra, max_pnode = 0; unsigned long mmr_base, present, paddr; - unsigned short pnode_mask; + unsigned short pnode_mask, pnode_io_mask; map_low_mmrs(); m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR ); m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; + mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); + n_io = mmioh.s.n_io; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; pnode_mask = (1 << n_val) - 1; + pnode_io_mask = (1 << n_io) - 1; + node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1; gnode_upper = ((unsigned long)gnode_extra << m_val); - printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n", - n_val, m_val, gnode_upper, gnode_extra); + printk(KERN_INFO "UV: N %d, M %d, N_IO: %d, gnode_upper 0x%lx, gnode_extra 0x%x, pnode_mask 0x%x, pnode_io_mask 0x%x\n", + n_val, m_val, n_io, gnode_upper, gnode_extra, pnode_mask, pnode_io_mask); printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); @@ -735,7 +742,7 @@ void __init uv_system_init(void) for (j = 0; j < 64; j++) { if (!test_bit(j, &present)) continue; - pnode = (i * 64 + j); + pnode = (i * 64 + j) & pnode_mask; uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; @@ -756,6 +763,7 @@ void __init uv_system_init(void) /* * apic_pnode_shift must be set before calling uv_apicid_to_pnode(); */ + uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift; pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); @@ -772,7 +780,6 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; - uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; @@ -796,7 +803,7 @@ void __init uv_system_init(void) map_gru_high(max_pnode); map_mmr_high(max_pnode); - map_mmioh_high(max_pnode); + map_mmioh_high(max_pnode & pnode_io_mask); uv_cpu_init(); uv_scir_register_cpu_notifier(); |