diff options
Diffstat (limited to 'arch/x86/kernel/irqinit.c')
| -rw-r--r-- | arch/x86/kernel/irqinit.c | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c new file mode 100644 index 000000000000..aab3d277766c --- /dev/null +++ b/arch/x86/kernel/irqinit.c @@ -0,0 +1,270 @@ +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/kprobes.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/delay.h> + +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/timer.h> +#include <asm/hw_irq.h> +#include <asm/pgtable.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/setup.h> +#include <asm/i8259.h> +#include <asm/traps.h> + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + +#ifdef CONFIG_X86_32 +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + outb(0, 0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .name = "fpu", +}; +#endif + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .name = "cascade", +}; + +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +int vector_used_by_percpu_irq(unsigned int vector) +{ + int cpu; + + for_each_online_cpu(cpu) { + if (per_cpu(vector_irq, cpu)[vector] != -1) + return 1; + } + + return 0; +} + +static void __init init_ISA_irqs(void) +{ + int i; + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < NR_IRQS_LEGACY; i++) { + struct irq_desc *desc = irq_to_desc(i); + + desc->status = IRQ_DISABLED; + desc->action = NULL; + desc->depth = 1; + + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +static void __init smp_intr_init(void) +{ +#ifdef CONFIG_SMP +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for generic single function call */ + alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, + call_function_single_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); + set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); +#endif +#endif /* CONFIG_SMP */ +} + +static void __init apic_intr_init(void) +{ + smp_intr_init(); + +#ifdef CONFIG_X86_THERMAL_VECTOR + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +#ifdef CONFIG_X86_THRESHOLD + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +#endif + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* generic IPI for platform specific use */ + alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + /* Performance monitoring interrupts: */ +# ifdef CONFIG_PERF_COUNTERS + alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); + alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt); +# endif + +#endif +} + +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ +#ifdef CONFIG_X86_32 + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } +#endif + init_ISA_irqs(); +} + +void __init native_init_IRQ(void) +{ + int i; + + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); + + apic_intr_init(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { + /* IA32_SYSCALL_VECTOR could be used in trap_init already. */ + if (!test_bit(i, used_vectors)) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); + } + + if (!acpi_ioapic) + setup_irq(2, &irq2); + +#ifdef CONFIG_X86_32 + /* + * Call quirks after call gates are initialised (usually add in + * the architecture specific gates): + */ + x86_quirk_intr_init(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +#endif +} |