1 files changed, 369 insertions, 320 deletions

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 01161077a49c..c29f301d3885 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -7,402 +7,451 @@
 #include <linux/crash_dump.h>
 #include <linux/smp.h>
 #include <linux/topology.h>
+#include <linux/pfn.h>
 #include <asm/sections.h>
 #include <asm/processor.h>
 #include <asm/setup.h>
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
 #include <asm/highmem.h>
+#include <asm/proto.h>
+#include <asm/cpumask.h>
+#include <asm/cpu.h>
+#include <asm/stackprotector.h>
 
-#ifdef CONFIG_X86_LOCAL_APIC
-unsigned int num_processors;
-unsigned disabled_cpus __cpuinitdata;
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-EXPORT_SYMBOL(boot_cpu_physical_apicid);
-unsigned int max_physical_apicid;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+# define DBG(x...) printk(KERN_DEBUG x)
+#else
+# define DBG(x...)
 #endif
 
-/* map cpu index to physical APIC ID */
-DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
-DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-#define	X86_64_NUMA	1
-
-/* map cpu index to node index */
-DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
-
-/* which logical CPUs are on which nodes */
-cpumask_t *node_to_cpumask_map;
-EXPORT_SYMBOL(node_to_cpumask_map);
-
-/* setup node_to_cpumask_map */
-static void __init setup_node_to_cpumask_map(void);
+DEFINE_PER_CPU(int, cpu_number);
+EXPORT_PER_CPU_SYMBOL(cpu_number);
 
+#ifdef CONFIG_X86_64
+#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
 #else
-static inline void setup_node_to_cpumask_map(void) { }
+#define BOOT_PERCPU_OFFSET 0
 #endif
 
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
-/*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas.  These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
- */
-static void __init setup_per_cpu_maps(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		per_cpu(x86_cpu_to_apicid, cpu) =
-				early_per_cpu_map(x86_cpu_to_apicid, cpu);
-		per_cpu(x86_bios_cpu_apicid, cpu) =
-				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
-#ifdef X86_64_NUMA
-		per_cpu(x86_cpu_to_node_map, cpu) =
-				early_per_cpu_map(x86_cpu_to_node_map, cpu);
-#endif
-	}
+DEFINE_PER_CPU(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
-	/* indicate the early static arrays will soon be gone */
-	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
-	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
-#ifdef X86_64_NUMA
-	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
-#endif
-}
-
-#ifdef CONFIG_X86_32
-/*
- * Great future not-so-futuristic plan: make i386 and x86_64 do it
- * the same way
- */
-unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
+	[0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
+};
 EXPORT_SYMBOL(__per_cpu_offset);
-static inline void setup_cpu_pda_map(void) { }
-
-#elif !defined(CONFIG_SMP)
-static inline void setup_cpu_pda_map(void) { }
 
-#else /* CONFIG_SMP && CONFIG_X86_64 */
-
-/*
- * Allocate cpu_pda pointer table and array via alloc_bootmem.
+/**
+ * pcpu_need_numa - determine percpu allocation needs to consider NUMA
+ *
+ * If NUMA is not configured or there is only one NUMA node available,
+ * there is no reason to consider NUMA.  This function determines
+ * whether percpu allocation should consider NUMA or not.
+ *
+ * RETURNS:
+ * true if NUMA should be considered; otherwise, false.
  */
-static void __init setup_cpu_pda_map(void)
+static bool __init pcpu_need_numa(void)
 {
-	char *pda;
-	struct x8664_pda **new_cpu_pda;
-	unsigned long size;
-	int cpu;
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	pg_data_t *last = NULL;
+	unsigned int cpu;
 
-	size = roundup(sizeof(struct x8664_pda), cache_line_size());
+	for_each_possible_cpu(cpu) {
+		int node = early_cpu_to_node(cpu);
 
-	/* allocate cpu_pda array and pointer table */
-	{
-		unsigned long tsize = nr_cpu_ids * sizeof(void *);
-		unsigned long asize = size * (nr_cpu_ids - 1);
+		if (node_online(node) && NODE_DATA(node) &&
+		    last && last != NODE_DATA(node))
+			return true;
 
-		tsize = roundup(tsize, cache_line_size());
-		new_cpu_pda = alloc_bootmem(tsize + asize);
-		pda = (char *)new_cpu_pda + tsize;
+		last = NODE_DATA(node);
 	}
+#endif
+	return false;
+}
 
-	/* initialize pointer table to static pda's */
-	for_each_possible_cpu(cpu) {
-		if (cpu == 0) {
-			/* leave boot cpu pda in place */
-			new_cpu_pda[0] = cpu_pda(0);
-			continue;
-		}
-		new_cpu_pda[cpu] = (struct x8664_pda *)pda;
-		new_cpu_pda[cpu]->in_bootmem = 1;
-		pda += size;
+/**
+ * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
+ * @cpu: cpu to allocate for
+ * @size: size allocation in bytes
+ * @align: alignment
+ *
+ * Allocate @size bytes aligned at @align for cpu @cpu.  This wrapper
+ * does the right thing for NUMA regardless of the current
+ * configuration.
+ *
+ * RETURNS:
+ * Pointer to the allocated area on success, NULL on failure.
+ */
+static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
+					unsigned long align)
+{
+	const unsigned long goal = __pa(MAX_DMA_ADDRESS);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	int node = early_cpu_to_node(cpu);
+	void *ptr;
+
+	if (!node_online(node) || !NODE_DATA(node)) {
+		ptr = __alloc_bootmem_nopanic(size, align, goal);
+		pr_info("cpu %d has no node %d or node-local memory\n",
+			cpu, node);
+		pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n",
+			 cpu, size, __pa(ptr));
+	} else {
+		ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node),
+						   size, align, goal);
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
+			 "%016lx\n", cpu, size, node, __pa(ptr));
 	}
-
-	/* point to new pointer table */
-	_cpu_pda = new_cpu_pda;
+	return ptr;
+#else
+	return __alloc_bootmem_nopanic(size, align, goal);
+#endif
 }
 
-#endif /* CONFIG_SMP && CONFIG_X86_64 */
-
-#ifdef CONFIG_X86_64
+/*
+ * Remap allocator
+ *
+ * This allocator uses PMD page as unit.  A PMD page is allocated for
+ * each cpu and each is remapped into vmalloc area using PMD mapping.
+ * As PMD page is quite large, only part of it is used for the first
+ * chunk.  Unused part is returned to the bootmem allocator.
+ *
+ * So, the PMD pages are mapped twice - once to the physical mapping
+ * and to the vmalloc area for the first percpu chunk.  The double
+ * mapping does add one more PMD TLB entry pressure but still is much
+ * better than only using 4k mappings while still being NUMA friendly.
+ */
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+static size_t pcpur_size __initdata;
+static void **pcpur_ptrs __initdata;
 
-/* correctly size the local cpu masks */
-static void __init setup_cpu_local_masks(void)
+static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
 {
-	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
-	alloc_bootmem_cpumask_var(&cpu_callin_mask);
-	alloc_bootmem_cpumask_var(&cpu_callout_mask);
-	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
-}
+	size_t off = (size_t)pageno << PAGE_SHIFT;
 
-#else /* CONFIG_X86_32 */
+	if (off >= pcpur_size)
+		return NULL;
 
-static inline void setup_cpu_local_masks(void)
-{
+	return virt_to_page(pcpur_ptrs[cpu] + off);
 }
 
-#endif /* CONFIG_X86_32 */
-
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
-void __init setup_per_cpu_areas(void)
+static ssize_t __init setup_pcpu_remap(size_t static_size)
 {
-	ssize_t size, old_size;
-	char *ptr;
-	int cpu;
-	unsigned long align = 1;
-
-	/* Setup cpu_pda map */
-	setup_cpu_pda_map();
+	static struct vm_struct vm;
+	pg_data_t *last;
+	size_t ptrs_size;
+	unsigned int cpu;
+	ssize_t ret;
+
+	/*
+	 * If large page isn't supported, there's no benefit in doing
+	 * this.  Also, on non-NUMA, embedding is better.
+	 */
+	if (!cpu_has_pse || pcpu_need_numa())
+		return -EINVAL;
+
+	last = NULL;
+	for_each_possible_cpu(cpu) {
+		int node = early_cpu_to_node(cpu);
 
-	/* Copy section for each CPU (we discard the original) */
-	old_size = PERCPU_ENOUGH_ROOM;
-	align = max_t(unsigned long, PAGE_SIZE, align);
-	size = roundup(old_size, align);
+		if (node_online(node) && NODE_DATA(node) &&
+		    last && last != NODE_DATA(node))
+			goto proceed;
 
-	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
-		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
+		last = NODE_DATA(node);
+	}
+	return -EINVAL;
+
+proceed:
+	/*
+	 * Currently supports only single page.  Supporting multiple
+	 * pages won't be too difficult if it ever becomes necessary.
+	 */
+	pcpur_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	if (pcpur_size > PMD_SIZE) {
+		pr_warning("PERCPU: static data is larger than large page, "
+			   "can't use large page\n");
+		return -EINVAL;
+	}
 
-	pr_info("PERCPU: Allocating %zd bytes of per cpu data\n", size);
+	/* allocate pointer array and alloc large pages */
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+	pcpur_ptrs = alloc_bootmem(ptrs_size);
 
 	for_each_possible_cpu(cpu) {
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-		ptr = __alloc_bootmem(size, align,
-				 __pa(MAX_DMA_ADDRESS));
-#else
-		int node = early_cpu_to_node(cpu);
-		if (!node_online(node) || !NODE_DATA(node)) {
-			ptr = __alloc_bootmem(size, align,
-					 __pa(MAX_DMA_ADDRESS));
-			pr_info("cpu %d has no node %d or node-local memory\n",
-				cpu, node);
-			pr_debug("per cpu data for cpu%d at %016lx\n",
-				 cpu, __pa(ptr));
-		} else {
-			ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
-							__pa(MAX_DMA_ADDRESS));
-			pr_debug("per cpu data for cpu%d on node%d at %016lx\n",
-				cpu, node, __pa(ptr));
-		}
-#endif
-		per_cpu_offset(cpu) = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
+		if (!pcpur_ptrs[cpu])
+			goto enomem;
+
+		/*
+		 * Only use pcpur_size bytes and give back the rest.
+		 *
+		 * Ingo: The 2MB up-rounding bootmem is needed to make
+		 * sure the partial 2MB page is still fully RAM - it's
+		 * not well-specified to have a PAT-incompatible area
+		 * (unmapped RAM, device memory, etc.) in that hole.
+		 */
+		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
+			     PMD_SIZE - pcpur_size);
+
+		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
 	}
 
-	/* Setup percpu data maps */
-	setup_per_cpu_maps();
+	/* allocate address and map */
+	vm.flags = VM_ALLOC;
+	vm.size = num_possible_cpus() * PMD_SIZE;
+	vm_area_register_early(&vm, PMD_SIZE);
 
-	/* Setup node to cpumask map */
-	setup_node_to_cpumask_map();
+	for_each_possible_cpu(cpu) {
+		pmd_t *pmd;
 
-	/* Setup cpu initialized, callin, callout masks */
-	setup_cpu_local_masks();
-}
+		pmd = populate_extra_pmd((unsigned long)vm.addr
+					 + cpu * PMD_SIZE);
+		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
+				     PAGE_KERNEL_LARGE));
+	}
 
+	/* we're ready, commit */
+	pr_info("PERCPU: Remapped at %p with large pages, static data "
+		"%zu bytes\n", vm.addr, static_size);
+
+	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, PMD_SIZE,
+				     pcpur_size - static_size, vm.addr, NULL);
+	goto out_free_ar;
+
+enomem:
+	for_each_possible_cpu(cpu)
+		if (pcpur_ptrs[cpu])
+			free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
+	ret = -ENOMEM;
+out_free_ar:
+	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+	return ret;
+}
+#else
+static ssize_t __init setup_pcpu_remap(size_t static_size)
+{
+	return -EINVAL;
+}
 #endif
 
-#ifdef X86_64_NUMA
-
 /*
- * Allocate node_to_cpumask_map based on number of available nodes
- * Requires node_possible_map to be valid.
+ * Embedding allocator
  *
- * Note: node_to_cpumask() is not valid until after this is done.
+ * The first chunk is sized to just contain the static area plus
+ * PERCPU_DYNAMIC_RESERVE and allocated as a contiguous area using
+ * bootmem allocator and used as-is without being mapped into vmalloc
+ * area.  This enables the first chunk to piggy back on the linear
+ * physical PMD mapping and doesn't add any additional pressure to
+ * TLB.
  */
-static void __init setup_node_to_cpumask_map(void)
-{
-	unsigned int node, num = 0;
-	cpumask_t *map;
-
-	/* setup nr_node_ids if not done yet */
-	if (nr_node_ids == MAX_NUMNODES) {
-		for_each_node_mask(node, node_possible_map)
-			num = node;
-		nr_node_ids = num + 1;
-	}
-
-	/* allocate the map */
-	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
-
-	pr_debug("Node to cpumask map at %p for %d nodes\n",
-		 map, nr_node_ids);
-
-	/* node_to_cpumask() will now work */
-	node_to_cpumask_map = map;
-}
+static void *pcpue_ptr __initdata;
+static size_t pcpue_unit_size __initdata;
 
-void __cpuinit numa_set_node(int cpu, int node)
+static struct page * __init pcpue_get_page(unsigned int cpu, int pageno)
 {
-	int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
-
-	if (cpu_pda(cpu) && node != NUMA_NO_NODE)
-		cpu_pda(cpu)->nodenumber = node;
-
-	if (cpu_to_node_map)
-		cpu_to_node_map[cpu] = node;
-
-	else if (per_cpu_offset(cpu))
-		per_cpu(x86_cpu_to_node_map, cpu) = node;
-
-	else
-		pr_debug("Setting node for non-present cpu %d\n", cpu);
+	return virt_to_page(pcpue_ptr + cpu * pcpue_unit_size
+			    + ((size_t)pageno << PAGE_SHIFT));
 }
 
-void __cpuinit numa_clear_node(int cpu)
+static ssize_t __init setup_pcpu_embed(size_t static_size)
 {
-	numa_set_node(cpu, NUMA_NO_NODE);
+	unsigned int cpu;
+
+	/*
+	 * If large page isn't supported, there's no benefit in doing
+	 * this.  Also, embedding allocation doesn't play well with
+	 * NUMA.
+	 */
+	if (!cpu_has_pse || pcpu_need_numa())
+		return -EINVAL;
+
+	/* allocate and copy */
+	pcpue_unit_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	pcpue_unit_size = max_t(size_t, pcpue_unit_size, PCPU_MIN_UNIT_SIZE);
+	pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
+				       PAGE_SIZE);
+	if (!pcpue_ptr)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu)
+		memcpy(pcpue_ptr + cpu * pcpue_unit_size, __per_cpu_load,
+		       static_size);
+
+	/* we're ready, commit */
+	pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n",
+		pcpue_unit_size >> PAGE_SHIFT, pcpue_ptr, static_size);
+
+	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
+				      pcpue_unit_size,
+				      pcpue_unit_size - static_size, pcpue_ptr,
+				      NULL);
 }
 
-#ifndef CONFIG_DEBUG_PER_CPU_MAPS
+/*
+ * 4k page allocator
+ *
+ * This is the basic allocator.  Static percpu area is allocated
+ * page-by-page and most of initialization is done by the generic
+ * setup function.
+ */
+static struct page **pcpu4k_pages __initdata;
+static int pcpu4k_nr_static_pages __initdata;
 
-void __cpuinit numa_add_cpu(int cpu)
+static struct page * __init pcpu4k_get_page(unsigned int cpu, int pageno)
 {
-	cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
+	if (pageno < pcpu4k_nr_static_pages)
+		return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno];
+	return NULL;
 }
 
-void __cpuinit numa_remove_cpu(int cpu)
+static void __init pcpu4k_populate_pte(unsigned long addr)
 {
-	cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]);
+	populate_extra_pte(addr);
 }
 
-#else /* CONFIG_DEBUG_PER_CPU_MAPS */
-
-/*
- * --------- debug versions of the numa functions ---------
- */
-static void __cpuinit numa_set_cpumask(int cpu, int enable)
+static ssize_t __init setup_pcpu_4k(size_t static_size)
 {
-	int node = cpu_to_node(cpu);
-	cpumask_t *mask;
-	char buf[64];
-
-	if (node_to_cpumask_map == NULL) {
-		printk(KERN_ERR "node_to_cpumask_map NULL\n");
-		dump_stack();
-		return;
-	}
-
-	mask = &node_to_cpumask_map[node];
-	if (enable)
-		cpu_set(cpu, *mask);
-	else
-		cpu_clear(cpu, *mask);
-
-	cpulist_scnprintf(buf, sizeof(buf), mask);
-	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
-		enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf);
-}
+	size_t pages_size;
+	unsigned int cpu;
+	int i, j;
+	ssize_t ret;
+
+	pcpu4k_nr_static_pages = PFN_UP(static_size);
+
+	/* unaligned allocations can't be freed, round up to page size */
+	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
+			       * sizeof(pcpu4k_pages[0]));
+	pcpu4k_pages = alloc_bootmem(pages_size);
+
+	/* allocate and copy */
+	j = 0;
+	for_each_possible_cpu(cpu)
+		for (i = 0; i < pcpu4k_nr_static_pages; i++) {
+			void *ptr;
+
+			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
+			if (!ptr)
+				goto enomem;
+
+			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
+			pcpu4k_pages[j++] = virt_to_page(ptr);
+		}
 
-void __cpuinit numa_add_cpu(int cpu)
-{
-	numa_set_cpumask(cpu, 1);
+	/* we're ready, commit */
+	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
+		pcpu4k_nr_static_pages, static_size);
+
+	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, 0, 0, NULL,
+				     pcpu4k_populate_pte);
+	goto out_free_ar;
+
+enomem:
+	while (--j >= 0)
+		free_bootmem(__pa(page_address(pcpu4k_pages[j])), PAGE_SIZE);
+	ret = -ENOMEM;
+out_free_ar:
+	free_bootmem(__pa(pcpu4k_pages), pages_size);
+	return ret;
 }
 
-void __cpuinit numa_remove_cpu(int cpu)
+static inline void setup_percpu_segment(int cpu)
 {
-	numa_set_cpumask(cpu, 0);
-}
+#ifdef CONFIG_X86_32
+	struct desc_struct gdt;
 
-int cpu_to_node(int cpu)
-{
-	if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
-		printk(KERN_WARNING
-			"cpu_to_node(%d): usage too early!\n", cpu);
-		dump_stack();
-		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
-	}
-	return per_cpu(x86_cpu_to_node_map, cpu);
+	pack_descriptor(&gdt, per_cpu_offset(cpu), 0xFFFFF,
+			0x2 | DESCTYPE_S, 0x8);
+	gdt.s = 1;
+	write_gdt_entry(get_cpu_gdt_table(cpu),
+			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
+#endif
 }
-EXPORT_SYMBOL(cpu_to_node);
 
 /*
- * Same function as cpu_to_node() but used if called before the
- * per_cpu areas are setup.
+ * Great future plan:
+ * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
+ * Always point %gs to its beginning
  */
-int early_cpu_to_node(int cpu)
+void __init setup_per_cpu_areas(void)
 {
-	if (early_per_cpu_ptr(x86_cpu_to_node_map))
-		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
-
-	if (!per_cpu_offset(cpu)) {
-		printk(KERN_WARNING
-			"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
-		dump_stack();
-		return NUMA_NO_NODE;
-	}
-	return per_cpu(x86_cpu_to_node_map, cpu);
-}
-
+	size_t static_size = __per_cpu_end - __per_cpu_start;
+	unsigned int cpu;
+	unsigned long delta;
+	size_t pcpu_unit_size;
+	ssize_t ret;
 
-/* empty cpumask */
-static const cpumask_t cpu_mask_none;
-
-/*
- * Returns a pointer to the bitmask of CPUs on Node 'node'.
- */
-const cpumask_t *cpumask_of_node(int node)
-{
-	if (node_to_cpumask_map == NULL) {
-		printk(KERN_WARNING
-			"cpumask_of_node(%d): no node_to_cpumask_map!\n",
-			node);
-		dump_stack();
-		return (const cpumask_t *)&cpu_online_map;
-	}
-	if (node >= nr_node_ids) {
-		printk(KERN_WARNING
-			"cpumask_of_node(%d): node > nr_node_ids(%d)\n",
-			node, nr_node_ids);
-		dump_stack();
-		return &cpu_mask_none;
-	}
-	return &node_to_cpumask_map[node];
-}
-EXPORT_SYMBOL(cpumask_of_node);
+	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
+		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
 
-/*
- * Returns a bitmask of CPUs on Node 'node'.
- *
- * Side note: this function creates the returned cpumask on the stack
- * so with a high NR_CPUS count, excessive stack space is used.  The
- * node_to_cpumask_ptr function should be used whenever possible.
- */
-cpumask_t node_to_cpumask(int node)
-{
-	if (node_to_cpumask_map == NULL) {
-		printk(KERN_WARNING
-			"node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
-		dump_stack();
-		return cpu_online_map;
-	}
-	if (node >= nr_node_ids) {
-		printk(KERN_WARNING
-			"node_to_cpumask(%d): node > nr_node_ids(%d)\n",
-			node, nr_node_ids);
-		dump_stack();
-		return cpu_mask_none;
+	/*
+	 * Allocate percpu area.  If PSE is supported, try to make use
+	 * of large page mappings.  Please read comments on top of
+	 * each allocator for details.
+	 */
+	ret = setup_pcpu_remap(static_size);
+	if (ret < 0)
+		ret = setup_pcpu_embed(static_size);
+	if (ret < 0)
+		ret = setup_pcpu_4k(static_size);
+	if (ret < 0)
+		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
+		      static_size, ret);
+
+	pcpu_unit_size = ret;
+
+	/* alrighty, percpu areas up and running */
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu) {
+		per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
+		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
+		per_cpu(cpu_number, cpu) = cpu;
+		setup_percpu_segment(cpu);
+		setup_stack_canary_segment(cpu);
+		/*
+		 * Copy data used in early init routines from the
+		 * initial arrays to the per cpu data areas.  These
+		 * arrays then become expendable and the *_early_ptr's
+		 * are zeroed indicating that the static arrays are
+		 * gone.
+		 */
+#ifdef CONFIG_X86_LOCAL_APIC
+		per_cpu(x86_cpu_to_apicid, cpu) =
+			early_per_cpu_map(x86_cpu_to_apicid, cpu);
+		per_cpu(x86_bios_cpu_apicid, cpu) =
+			early_per_cpu_map(x86_bios_cpu_apicid, cpu);
+#endif
+#ifdef CONFIG_X86_64
+		per_cpu(irq_stack_ptr, cpu) =
+			per_cpu(irq_stack_union.irq_stack, cpu) +
+			IRQ_STACK_SIZE - 64;
+#ifdef CONFIG_NUMA
+		per_cpu(x86_cpu_to_node_map, cpu) =
+			early_per_cpu_map(x86_cpu_to_node_map, cpu);
+#endif
+#endif
+		/*
+		 * Up to this point, the boot CPU has been using .data.init
+		 * area.  Reload any changed state for the boot CPU.
+		 */
+		if (cpu == boot_cpu_id)
+			switch_to_new_gdt(cpu);
 	}
-	return node_to_cpumask_map[node];
-}
-EXPORT_SYMBOL(node_to_cpumask);
-
-/*
- * --------- end of debug versions of the numa functions ---------
- */
 
-#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
+	/* indicate the early static arrays will soon be gone */
+#ifdef CONFIG_X86_LOCAL_APIC
+	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
+	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
+#endif
+#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
+	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
+#endif
 
-#endif /* X86_64_NUMA */
+	/* Setup node to cpumask map */
+	setup_node_to_cpumask_map();
 
+	/* Setup cpu initialized, callin, callout masks */
+	setup_cpu_local_masks();
+}