diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 78 |
1 files changed, 51 insertions, 27 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 2d8dfb3213bf..78cf5f221f83 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -60,7 +60,8 @@ * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 - * XM = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 */ enum { OMAP3BEAGLE_BOARD_UNKN = 0, @@ -68,14 +69,26 @@ enum { OMAP3BEAGLE_BOARD_C1_3, OMAP3BEAGLE_BOARD_C4, OMAP3BEAGLE_BOARD_XM, + OMAP3BEAGLE_BOARD_XMC, }; static u8 omap3_beagle_version; -static u8 omap3_beagle_get_rev(void) -{ - return omap3_beagle_version; -} +/* + * Board-specific configuration + * Defaults to BeagleBoard-xMC + */ +static struct { + int mmc1_gpio_wp; + int usb_pwr_level; + int reset_gpio; + int usr_button_gpio; +} beagle_config = { + .mmc1_gpio_wp = -EINVAL, + .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .reset_gpio = 129, + .usr_button_gpio = 4, +}; static struct gpio omap3_beagle_rev_gpios[] __initdata = { { 171, GPIOF_IN, "rev_id_0" }, @@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void) case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; + beagle_config.mmc1_gpio_wp = 29; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 0: - printk(KERN_INFO "OMAP3 Beagle Rev: xM\n"); + printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; + beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + break; + case 2: + printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -234,7 +261,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, + .gpio_wp = -EINVAL, }, {} /* Terminator */ }; @@ -252,17 +279,11 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r, usb_pwr_level; - - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - mmc[0].gpio_wp = -EINVAL; - } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || - (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } + int r; + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -272,9 +293,8 @@ static int beagle_twl_gpio_setup(struct device *dev, * high / others active low) * DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - usb_pwr_level = GPIOF_OUT_INIT_HIGH; - beagle_dvi_device.reset_gpio = 129; + /* Valid for all -xM revisions */ + if (cpu_is_omap3630()) { /* * gpio + 1 on Xm controls the TFP410's enable line (active low) * gpio + 2 control varies depending on the board rev as below: @@ -292,8 +312,6 @@ static int beagle_twl_gpio_setup(struct device *dev, pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); } else { - usb_pwr_level = GPIOF_OUT_INIT_LOW; - beagle_dvi_device.reset_gpio = 170; /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -301,8 +319,10 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -454,7 +474,8 @@ static struct platform_device leds_gpio = { static struct gpio_keys_button gpio_buttons[] = { { .code = BTN_EXTRA, - .gpio = 7, + /* Dynamically assigned depending on board */ + .gpio = -EINVAL, .desc = "user", .wakeup = 1, }, @@ -518,8 +539,8 @@ static void __init beagle_opp_init(void) return; } - /* Custom OPP enabled for XM */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + /* Custom OPP enabled for all xM versions */ + if (cpu_is_omap3630()) { struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); struct omap_hwmod *dh = omap_hwmod_lookup("iva"); struct device *dev; @@ -559,6 +580,9 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); omap3_beagle_i2c_init(); + + gpio_buttons[0].gpio = beagle_config.usr_button_gpio; + platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); |