diff options
Diffstat (limited to 'arch')
128 files changed, 591 insertions, 431 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84449dd8f031..a91009c61870 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -293,6 +293,7 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ @@ -588,6 +589,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 153a4b2d12b5..c9b4f27d191e 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -11,7 +11,7 @@ /include/ "mmp2.dtsi" / { - model = "Marvell MMP2 Aspenite Development Board"; + model = "Marvell MMP2 Brownstone Development Board"; compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; chosen { @@ -19,7 +19,7 @@ }; memory { - reg = <0x00000000 0x04000000>; + reg = <0x00000000 0x08000000>; }; soc { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea7cc0e..581cb081cb0f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8314e4171884..dd4358bc26e2 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9e61da404d57..419ea7413d23 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 0d8472e5ab9f..c9a54e06fb68 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index a26fc47a55e8..d71fe2a68f09 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 1f8e1e1481df..10dcec7e7321 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index fc82b1a26458..d71b8d581e3d 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 01c5e358fdb2..ed3627c116cc 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index dc5e2d445a93..b00544e0cd5d 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e47081c494d9..62fc4fb3e5f9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 6308fa3bec1e..c13fd1f3b09f 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 5372ca399b1f..1f49d69595a0 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 91072553963f..3a8bb5736928 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 7be54690aeec..e42cf597f6e6 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -19,6 +19,7 @@ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ " .popsection" diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index e0d1c0cfa548..6b9b077d86b3 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -4,7 +4,7 @@ * ARM PrimeXsys System Controller SP810 header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 437f0c426517..0d1851ca6eb9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -495,6 +495,7 @@ ENDPROC(__und_usr) * The out of line fixup for the ldrt above. */ .pushsection .fixup, "ax" + .align 2 4: mov pc, r9 .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 8f96ec778e8d..6123daf397a7 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = { /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, REGS(PC, NOSPPCX, 0, 0, 0)), /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index f8437dd238c2..ded4652ada80 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,8 @@ -obj-y := clock.o highbank.o system.o +obj-y := clock.o highbank.o system.o smc.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) + obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index d8e2d0be64ac..141ed5171826 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void); static inline void highbank_lluart_map_io(void) {} #endif +extern void highbank_smc1(int fn, int arg); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 410a112bb52e..8777612b1a42 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = { {} }; +#ifdef CONFIG_CACHE_L2X0 +static void highbank_l2x0_disable(void) +{ + /* Disable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x0); +} +#endif + static void __init highbank_init_irq(void) { of_irq_init(irq_match); + +#ifdef CONFIG_CACHE_L2X0 + /* Enable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x1); l2x0_of_init(0, ~0UL); + outer_cache.disable = highbank_l2x0_disable; +#endif } static void __init highbank_timer_init(void) diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S new file mode 100644 index 000000000000..407d17baaaa9 --- /dev/null +++ b/arch/arm/mach-highbank/smc.S @@ -0,0 +1,27 @@ +/* + * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc. + * Copyright 2012 Calxeda, Inc. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/* + * This is common routine to manage secure monitor API + * used to modify the PL310 secure registers. + * 'r0' contains the value to be modified and 'r12' contains + * the monitor API number. + * Function signature : void highbank_smc1(u32 fn, u32 arg) + */ + +ENTRY(highbank_smc1) + stmfd sp!, {r4-r11, lr} + mov r12, r0 + mov r0, r1 + dsb + smc #0 + ldmfd sp!, {r4-r11, pc} +ENDPROC(highbank_smc1) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0021f726b153..eff4db5de0dd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -477,6 +477,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 0f0beb580b73..516ddee1948e 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); - mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), - MX1_TIM1_INT); + mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 4e4f384ee8dd..ea13e61bd5f3 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL); clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL); - mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), - MX21_INT_GPT1); + mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d9833bb5fd61..fdd8cc87c9fe 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -243,6 +243,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 50a7ebd8d1b2..295cbd7c08dc 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); - mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), - MX27_INT_GPT1); + mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); clk_prepare_enable(clk[emi_ahb_gate]); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index a854b9cae5ea..c9a06d800f8e 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref) mx31_revision(); clk_disable_unprepare(clk[iim_gate]); - mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), - MX31_INT_GPT); + mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a9e60bf7dd75..920a8cc42726 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -267,11 +267,9 @@ int __init mx35_clocks_init() imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(&epit1_clk, - MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); + epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); #else - mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), - MX35_INT_GPT); + mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); #endif return 0; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index fcd94f3b0f0e..a2200c77bf70 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, periph_apm_sel, ARRAY_SIZE(periph_apm_sel)); clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1, main_bus_sel, ARRAY_SIZE(main_bus_sel)); - clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1, + clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1, per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel)); clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2); clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3); clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3); - clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0, + clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1, per_root_sel, ARRAY_SIZE(per_root_sel)); clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3); clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28); @@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 166250000); /* System timer */ - mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), - MX51_INT_GPT); + mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX51", mx51_revision()); @@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 200000000); /* System timer */ - mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), - MX53_INT_GPT); + mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index cab02d0a15d6..17dc66a085a5 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5 "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; -static const char * const clks_init_on[] __initconst = { - "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3", -}; - enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m, @@ -161,11 +157,14 @@ enum mx6q_clks { static struct clk *clk[clk_max]; +static enum mx6q_clks const clks_init_on[] __initconst = { + mmdc_ch0_axi, mmdc_ch1_axi, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; - struct clk *c; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -424,21 +423,14 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { - c = clk_get_sys(clks_init_on[i], NULL); - if (IS_ERR(c)) { - pr_err("%s: failed to get clk %s", __func__, - clks_init_on[i]); - return PTR_ERR(c); - } - clk_prepare_enable(c); - } + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(NULL, base, irq); + mxc_timer_init(base, irq); return 0; } diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 4685919deb63..0440379e3628 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -74,30 +74,15 @@ struct clk_pllv2 { void __iomem *base; }; -static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate, + u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn) { long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; - unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; - void __iomem *pllbase; + unsigned long dbl; s64 temp; - struct clk_pllv2 *pll = to_clk_pllv2(hw); - - pllbase = pll->base; - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; mfi = (mfi <= 5) ? 5 : mfi; @@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, return temp; } -static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, +static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { + u32 dp_op, dp_mfd, dp_mfn, dp_ctl; + void __iomem *pllbase; struct clk_pllv2 *pll = to_clk_pllv2(hw); + + pllbase = pll->base; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + + return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn); +} + +static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate, + u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn) +{ u32 reg; - void __iomem *pllbase; long mfi, pdf, mfn, mfd = 999999; s64 temp64; unsigned long quad_parent_rate; - unsigned long pll_hfsm, dp_ctl; - - pllbase = pll->base; quad_parent_rate = 4 * parent_rate; pdf = mfi = -1; @@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; pdf--; - temp64 = rate * (pdf+1) - quad_parent_rate * mfi; - do_div(temp64, quad_parent_rate/1000000); + temp64 = rate * (pdf + 1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate / 1000000); mfn = (long)temp64; + reg = mfi << 4 | pdf; + + *dp_op = reg; + *dp_mfd = mfd; + *dp_mfn = mfn; + + return 0; +} + +static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pllv2 *pll = to_clk_pllv2(hw); + void __iomem *pllbase; + u32 dp_ctl, dp_op, dp_mfd, dp_mfn; + int ret; + + pllbase = pll->base; + + + ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn); + if (ret) + return ret; + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); /* use dpdck0_2 */ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); - } else { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); - } + + __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP); + __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN); return 0; } @@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - return rate; + u32 dp_op, dp_mfd, dp_mfn; + + __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn); + return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN, + dp_op, dp_mfd, dp_mfn); } static int clk_pllv2_prepare(struct clk_hw *hw) diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e3f1f0f4cab 100644 --- a/arch/arm/mach-imx/crm-regs-imx5.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h @@ -23,7 +23,7 @@ #define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR) #define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR) #define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) -#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) +#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR) /* PLL Register Offsets */ #define MXC_PLL_DP_CTL 0x00 diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 89493abd497c..20ed2d56c1af 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -12,6 +12,7 @@ #include <linux/errno.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <mach/common.h> int platform_cpu_kill(unsigned int cpu) @@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu) return 1; } +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + /* * platform-specific code to shutdown a CPU * @@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu) */ void platform_cpu_die(unsigned int cpu) { - flush_cache_all(); + cpu_enter_lowpower(); imx_enable_cpu(cpu, false); cpu_do_idle(); + cpu_leave_lowpower(); /* We should never return from idle */ panic("cpu %d unexpectedly exit from shutdown\n", cpu); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index c515f8ede1a1..6450303f1a7a 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", .platform_data = &tsc2007_info, .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index ac50f1671e38..1e09de50cbcd 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x49), - .type = "tsc2007", .platform_data = &tsc2007_info, }, }; diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index dff82eb57cd9..f76edb96a48a 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = { PB23_PF_USB_PWR, PB24_PF_USB_OC, /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, PB10_PF_CSI_D0, PB11_PF_CSI_D1, PB12_PF_CSI_D2, @@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = { { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, }; +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, +}; + /* Camera */ static int visstrim_camera_power(struct device *dev, int on) { @@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void) struct platform_device *pdev; int dma; - /* Initialize tvp5150 gpios */ - mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); - gpio_set_value(TVP5150_RSTN, 1); - gpio_set_value(TVP5150_PWDN, 0); - ndelay(1); - gpio_set_value(TVP5150_PWDN, 1); ndelay(1); gpio_set_value(TVP5150_RSTN, 0); @@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { /* USB OTG */ static int otg_phy_init(struct platform_device *pdev) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - - mdelay(10); - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } @@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d14bbe949a4f..3e7401fca76c 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -32,7 +32,7 @@ * Memory-mapped I/O on MX21ADS base board */ #define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE SZ_16M +#define MX21ADS_MMIO_SIZE 0xc00000 #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 967ed5b35a45..a8983b9778d1 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, void __init imx3_init_l2x0(void) { +#ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; void __iomem *clkctl_base; @@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void) } l2x0_init(l2x0_base, 0x00030024, 0x00000000); +#endif } #ifdef CONFIG_SOC_IMX31 @@ -179,6 +181,8 @@ void __init imx31_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + pinctrl_provide_dummies(); + if (to_version == 1) { strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", strlen(imx31_sdma_pdata.fw_name)); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index feeee17da96b..1d003053d562 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -202,6 +202,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + pinctrl_provide_dummies(); + /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c5739519..b0d3cc49269d 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 25fb3fd418ef..f261cd242643 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; + gate_fn->fn = fn; /* ops is the gate ops, but with our disable function */ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { @@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, bit_idx, 0, &gating_lock, fn); } +static struct clk *ge0, *ge1; + void __init kirkwood_clk_init(void) { - struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio; + struct clk *runit, *sata0, *sata1, *usb0, *sdio; struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, @@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR); + /* The interface forgets the MAC address assigned by u-boot if + the clock is turned off, so claim the clk now. */ + clk_prepare_enable(ge0); } @@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR); + clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 3eee37a3b501..a115142f8690 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index fede3d503efa..c5b68510776b 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index fcfe0e3bd701..e60c7d98922b 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq.c @@ -241,6 +241,7 @@ void __init mmp2_init_icu(void) icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; icu_data[1].nr_irqs = 2; + icu_data[1].cascade_irq = 4; icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, icu_data[1].virq_base, 0, @@ -249,6 +250,7 @@ void __init mmp2_init_icu(void) icu_data[2].reg_status = mmp_icu_base + 0x154; icu_data[2].reg_mask = mmp_icu_base + 0x16c; icu_data[2].nr_irqs = 2; + icu_data[2].cascade_irq = 5; icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, icu_data[2].virq_base, 0, @@ -257,6 +259,7 @@ void __init mmp2_init_icu(void) icu_data[3].reg_status = mmp_icu_base + 0x180; icu_data[3].reg_mask = mmp_icu_base + 0x17c; icu_data[3].nr_irqs = 3; + icu_data[3].cascade_irq = 9; icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, icu_data[3].virq_base, 0, @@ -265,6 +268,7 @@ void __init mmp2_init_icu(void) icu_data[4].reg_status = mmp_icu_base + 0x158; icu_data[4].reg_mask = mmp_icu_base + 0x170; icu_data[4].nr_irqs = 5; + icu_data[4].cascade_irq = 17; icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, icu_data[4].virq_base, 0, @@ -273,6 +277,7 @@ void __init mmp2_init_icu(void) icu_data[5].reg_status = mmp_icu_base + 0x15c; icu_data[5].reg_mask = mmp_icu_base + 0x174; icu_data[5].nr_irqs = 15; + icu_data[5].cascade_irq = 35; icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, icu_data[5].virq_base, 0, @@ -281,6 +286,7 @@ void __init mmp2_init_icu(void) icu_data[6].reg_status = mmp_icu_base + 0x160; icu_data[6].reg_mask = mmp_icu_base + 0x178; icu_data[6].nr_irqs = 2; + icu_data[6].cascade_irq = 51; icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, icu_data[6].virq_base, 0, @@ -289,6 +295,7 @@ void __init mmp2_init_icu(void) icu_data[7].reg_status = mmp_icu_base + 0x188; icu_data[7].reg_mask = mmp_icu_base + 0x184; icu_data[7].nr_irqs = 2; + icu_data[7].cascade_irq = 55; icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, icu_data[7].virq_base, 0, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31a..2c5d0ed75285 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..580fd17208da 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53deccecab..df2534de3361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4e1a3b0e8cc8..1efdec236ae8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2172f6603848..e2b701e164f6 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096bd407..f24e3f7a2bbc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d294b1a3..1a39945d9ff8 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f146fe..88ffa1e645cd 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,9 @@ #include <linux/module.h> #include <linux/platform_device.h> + +#include <asm/memblock.h> + #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b3264abe..00486a8564fd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303be563..6038a8c84b74 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 80e55c5c9998..9fe6829f4c16 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060a0b75..471e62a74a16 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e8f91f..773193670ea2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 950454a3fa31..f30e861ce6d9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f9ee5b..acc216491b8a 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f82..d52651a05daa 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d0ca7c..3a595e899724 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/irq.h> #include "common.h" #include <plat/cpu.h> @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aaca068..c1b93c752d70 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12e..c4a576856661 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7fd..805bea6edf17 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 96484bcd34ca..11a3c1e9801f 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -35,5 +35,5 @@ #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) #define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h new file mode 100644 index 000000000000..1aa5d0a50a0b --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-orion5x/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <mach/orion5x.h> +#include <asm/sizes.h> + +#define IO_SPACE_LIMIT SZ_2M +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 2745f5d95b3f..683e085ce162 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -82,6 +82,7 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S index ea1564609bd4..9e3ae6bfe50d 100644 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h index 383ab04dc6c9..d50bdb605925 100644 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ b/arch/arm/mach-spear13xx/include/mach/dma.h @@ -4,7 +4,7 @@ * DMA information for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h index 6d8c45b9f298..dac57fd0cdfd 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -4,7 +4,7 @@ * spear13xx machine family generic header file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h index cd6f4f86a56b..85f176311f63 100644 --- a/arch/arm/mach-spear13xx/include/mach/gpio.h +++ b/arch/arm/mach-spear13xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h index f542a24aa5f2..271a62b4cd31 100644 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h index 30c57ef72686..65f27def239b 100644 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -4,7 +4,7 @@ * spear13xx Machine family specific definition * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h index 31af3e8d976e..3a58b8284a6a 100644 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ b/arch/arm/mach-spear13xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h index c7840896ae6e..70fe72f05dea 100644 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index fefd15b2f380..732d29bc7330 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c index ee38cbc56869..81e4ed76ad06 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index 50b349ae863d..cf936b106e27 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S index 590519f10d6e..0a6381fad5d9 100644 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 4a95b9453c2a..ce19113ca791 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family generic header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h index 451b2081bfc9..2ac74c6db7f1 100644 --- a/arch/arm/mach-spear3xx/include/mach/gpio.h +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 51bd62a0254c..803de76f5f36 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 18e2ac576f25..6309bf68d6f8 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 51eb953148a9..8cca95193d4d 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -4,7 +4,7 @@ * SPEAr3xx Machine family specific definition * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h index a38cc9de876f..9f5d08bd0c44 100644 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h index 53ba8bbc0dfa..b909b011f7c8 100644 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f74a05bdb829..0f882ecb7d81 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 84dfb0900747..bbcf4571d361 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index a88fa841d29d..88d483bcd66a 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f22419ed74a8..0f41bd1c47c3 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h index 3a789dbb69f7..d42cefc0356d 100644 --- a/arch/arm/mach-spear6xx/include/mach/gpio.h +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 179e45774b3a..c34acc201d34 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 4d6a2ee99c3b..5beb7ebe2948 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -33,7 +33,7 @@ static bool is_enabled; -static void tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_enable(void) { void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9c74ac545849..1509a3cb5833 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -580,43 +580,12 @@ static void ux500_uart0_reset(void) udelay(1); } -/* This needs to be referenced by callbacks */ -struct pinctrl *u0_p; -struct pinctrl_state *u0_def; -struct pinctrl_state *u0_sleep; - -static void ux500_uart0_init(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_def)) - return; - - ret = pinctrl_select_state(u0_p, u0_def); - if (ret) - pr_err("could not set UART0 defstate\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) - return; - - ret = pinctrl_select_state(u0_p, u0_sleep); - if (ret) - pr_err("could not set UART0 idlestate\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - struct amba_device *uart0_device; - - uart0_device = db8500_add_uart0(parent, &uart0_plat); - if (uart0_device) { - u0_p = pinctrl_get(&uart0_device->dev); - if (IS_ERR(u0_p)) - dev_err(&uart0_device->dev, - "could not get UART0 pinctrl\n"); - else { - u0_def = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(u0_def)) { - dev_err(&uart0_device->dev, - "could not get UART0 defstate\n"); - } - u0_sleep = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(u0_sleep)) - dev_err(&uart0_device->dev, - "could not get UART0 idlestate\n"); - } - } + db8500_add_uart0(parent, &uart0_plat); db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cf4687ee2a7b..cd8ea3588f93 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, -#if 0 - { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = SZ_16M, - .type = MT_DEVICE }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), - .length = SZ_16M, + .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), + .length = IO_SPACE_LIMIT, .type = MT_DEVICE }, #endif -#endif }; void __init versatile_map_io(void) diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 4d4973dd8fba..408e58da46c6 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,8 +29,9 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul +#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE -/* macro to get at IO space when running virtually */ +/* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h new file mode 100644 index 000000000000..0406513be7d8 --- /dev/null +++ b/arch/arm/mach-versatile/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-versatile/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define PCIO_BASE 0xeb000000ul + +#define __io(a) ((a) + PCIO_BASE) + +#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 15c6a00000ec..bec933b04ef0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; +static struct resource io_port = { + .name = "PCI", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct resource non_mem = { @@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } + ret = request_resource(&ioport_resource, &io_port); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "port region (%d)\n", ret); + goto out; + } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; + sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 62135849f48b..c641fb685017 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -762,6 +762,11 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; + case BPF_S_ANC_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 99ae5e3f46d2..7fa2f7d3cb90 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -68,6 +68,8 @@ #define ARM_INST_CMP_R 0x01500000 #define ARM_INST_CMP_I 0x03500000 +#define ARM_INST_EOR_R 0x00200000 + #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 #define ARM_INST_LDRH_I 0x01d000b0 @@ -132,6 +134,8 @@ #define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) +#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) + #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) #define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index 9129c9e7d532..88726f4dbbfa 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -50,6 +50,7 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <asm/mach/time.h> @@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk) return 0; } -void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init epit_timer_init(void __iomem *base, int irq) { + struct clk *timer_clk; + + timer_clk = clk_get_sys("imx-epit.0", NULL); + if (IS_ERR(timer_clk)) { + pr_err("i.MX epit: unable to get clk\n"); + return; + } + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index cf663d84e7c1..e429ca1b814a 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -54,8 +54,8 @@ extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx53_soc_init(void); extern void imx51_init_late(void); -extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); -extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); +extern void epit_timer_init(void __iomem *base, int irq); +extern void mxc_timer_init(void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); extern int mx25_clocks_init(void); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 99f958ca6cb8..00e8e659e667 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -58,6 +58,7 @@ /* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_CLK_PER (2 << 6) #define V2_TCTL_FRR (1 << 9) #define V2_IR 0x0c #define V2_TSTAT 0x08 @@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) return 0; } -void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init mxc_timer_init(void __iomem *base, int irq) { uint32_t tctl_val; + struct clk *timer_clk; struct clk *timer_ipg_clk; - if (!timer_clk) { - timer_clk = clk_get_sys("imx-gpt.0", "per"); - if (IS_ERR(timer_clk)) { - pr_err("i.MX timer: unable to get clk\n"); - return; - } - - timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); - if (!IS_ERR(timer_ipg_clk)) - clk_prepare_enable(timer_ipg_clk); + timer_clk = clk_get_sys("imx-gpt.0", "per"); + if (IS_ERR(timer_clk)) { + pr_err("i.MX timer: unable to get clk\n"); + return; } + timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); + if (!IS_ERR(timer_ipg_clk)) + clk_prepare_enable(timer_ipg_clk); + clk_prepare_enable(timer_clk); timer_base = base; @@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 62ec5c452792..706b7e29397f 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) struct clk *c; struct clk *pa; + mutex_lock(&clocks_mutex); seq_printf(s, "%-30s %-30s %-10s %s\n", "clock-name", "parent-name", "rate", "use-count"); @@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) seq_printf(s, "%-30s %-30s %-10lu %d\n", c->name, pa ? pa->name : "none", c->rate, c->usecount); } + mutex_unlock(&clocks_mutex); return 0; } diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 297245dba66e..de6c0a08f461 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap3505(): True for OMAP3505 - * cpu_is_omap3517(): True for OMAP3517 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3517) -IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 -#define cpu_is_omap3503() 0 -#define cpu_is_omap3515() 0 -#define cpu_is_omap3525() 0 -#define cpu_is_omap3530() 0 -#define cpu_is_omap3505() 0 -#define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 @@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517) #if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap3430 -# undef cpu_is_omap3503 -# undef cpu_is_omap3515 -# undef cpu_is_omap3525 -# undef cpu_is_omap3530 -# undef cpu_is_omap3505 -# undef cpu_is_omap3517 # undef cpu_is_ti81xx # undef cpu_is_ti816x # undef cpu_is_ti814x @@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_am33xx # undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() -# define cpu_is_omap3503() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (!omap3_has_sgx())) -# define cpu_is_omap3515() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (omap3_has_sgx())) -# define cpu_is_omap3525() (cpu_is_omap3430() && \ - (!omap3_has_sgx()) && \ - (omap3_has_iva())) -# define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3517() is_omap3517() -# define cpu_is_omap3505() (cpu_is_omap3517() && \ - !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti81xx() is_ti81xx() @@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) #define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP3517_CLASS 0x35170034 -#define OMAP3517_REV_ES1_0 OMAP3517_CLASS -#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) - #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7754a886d42..5493bd95da5e 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -172,8 +172,7 @@ struct omap_mmc_platform_data { extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); @@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } - #endif extern int omap_msdi_reset(struct omap_hwmod *oh); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 61fd837624a8..c1793786aea9 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase) * Watchdog ****************************************************************************/ static struct resource orion_wdt_resource = - DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28); static struct platform_device orion_wdt_device = { .name = "orion_wdt", diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 58b79809d20c..584c9bf8ed2d 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, { "pxa168-ssp", PXA168_SSP }, + { "pxa910-ssp", PXA910_SSP }, { }, }; diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index ab3de721c5db..75b05ad0fbad 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header for spear platform * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index e14a3e4932f9..2bc6b54460a8 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h index 03ed8b585dcf..88a7fbd24793 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h index 914d09dd50fd..ef95e5b780bd 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -4,7 +4,7 @@ * SPEAr platform specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 6dd455bafdfd..2ce6cb17a98b 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index a56a067717c1..12cf27f935f9 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index ea0a61302b7e..4f990115b1bd 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 961fb7261243..853e891e1184 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer source file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 68d651081bd3..d0b1607f2711 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -35,6 +35,7 @@ #include <asm/setup.h> #include <asm/irq.h> #include <asm/pgtable.h> +#include <asm/sections.h> #if defined(__H8300H__) #define CPU "H8/300H" @@ -54,7 +55,6 @@ unsigned long memory_end; char __initdata command_line[COMMAND_LINE_SIZE]; -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; extern char _target_name[]; extern void h8300_gpio_init(void); @@ -119,9 +119,9 @@ void __init setup_arch(char **cmdline_p) memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; #endif - init_mm.start_code = (unsigned long) &_stext; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; + init_mm.start_code = (unsigned long) _stext; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) 0; #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT) @@ -134,15 +134,12 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n"); #ifdef DEBUG - printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end, - (int) memory_end, (int) &_ramend); + printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p " + "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start, + __bss_stop); + printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx " + "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start, + memory_end, memory_end, &_ramend); #endif #ifdef CONFIG_DEFAULT_CMDLINE diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index 973369c32a95..981e25094b1a 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -36,6 +36,7 @@ #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/sections.h> #undef DEBUG @@ -123,7 +124,6 @@ void __init mem_init(void) int codek = 0, datak = 0, initk = 0; /* DAVIDM look at setup memory map generically with reserved area */ unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; extern unsigned long _ramend, _ramstart; unsigned long len = &_ramend - &_ramstart; unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ @@ -142,9 +142,9 @@ void __init mem_init(void) /* this will put all memory onto the freelists */ totalram_pages = free_all_bootmem(); - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; + codek = (_etext - _stext) >> 10; + datak = (__bss_stop - _sdata) >> 10; + initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n", @@ -178,22 +178,21 @@ free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; - extern char __init_begin, __init_end; /* * the following code should be cool even if these sections * are not page aligned. */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + addr = PAGE_ALIGN((unsigned long)(__init_begin)); /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (addr - PAGE_ALIGN((long) __init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)__init_begin)), (int)(addr - PAGE_SIZE)); #endif } diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 36f957f31842..8733a86ad52e 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -68,9 +68,7 @@ static const char *pseries_nvram_os_partitions[] = { }; static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len); + enum kmsg_dump_reason reason); static struct kmsg_dumper nvram_kmsg_dumper = { .dump = oops_to_nvram @@ -504,28 +502,6 @@ int __init pSeries_nvram_init(void) } /* - * Try to capture the last capture_len bytes of the printk buffer. Return - * the amount actually captured. - */ -static size_t capture_last_msgs(const char *old_msgs, size_t old_len, - const char *new_msgs, size_t new_len, - char *captured, size_t capture_len) -{ - if (new_len >= capture_len) { - memcpy(captured, new_msgs + (new_len - capture_len), - capture_len); - return capture_len; - } else { - /* Grab the end of old_msgs. */ - size_t old_tail_len = min(old_len, capture_len - new_len); - memcpy(captured, old_msgs + (old_len - old_tail_len), - old_tail_len); - memcpy(captured + old_tail_len, new_msgs, new_len); - return old_tail_len + new_len; - } -} - -/* * Are we using the ibm,rtas-log for oops/panic reports? And if so, * would logging this oops/panic overwrite an RTAS event that rtas_errd * hasn't had a chance to read and process? Return 1 if so, else 0. @@ -541,27 +517,6 @@ static int clobbering_unread_rtas_event(void) NVRAM_RTAS_READ_TIMEOUT); } -/* Squeeze out each line's <n> severity prefix. */ -static size_t elide_severities(char *buf, size_t len) -{ - char *in, *out, *buf_end = buf + len; - /* Assume a <n> at the very beginning marks the start of a line. */ - int newline = 1; - - in = out = buf; - while (in < buf_end) { - if (newline && in+3 <= buf_end && - *in == '<' && isdigit(in[1]) && in[2] == '>') { - in += 3; - newline = 0; - } else { - newline = (*in == '\n'); - *out++ = *in++; - } - } - return out - buf; -} - /* Derived from logfs_compress() */ static int nvram_compress(const void *in, void *out, size_t inlen, size_t outlen) @@ -619,9 +574,7 @@ static int zip_oops(size_t text_len) * partition. If that's too much, go back and capture uncompressed text. */ static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len) + enum kmsg_dump_reason reason) { static unsigned int oops_count = 0; static bool panicking = false; @@ -660,14 +613,14 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, return; if (big_oops_buf) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, big_oops_buf, big_oops_buf_sz); - text_len = elide_severities(big_oops_buf, text_len); + kmsg_dump_get_buffer(dumper, false, + big_oops_buf, big_oops_buf_sz, &text_len); rc = zip_oops(text_len); } if (rc != 0) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, oops_data, oops_data_sz); + kmsg_dump_rewind(dumper); + kmsg_dump_get_buffer(dumper, true, + oops_data, oops_data_sz, &text_len); err_type = ERR_TYPE_KERNEL_PANIC; *oops_len = (u16) text_len; } diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h index c3dd275f25e2..9ab078a4605d 100644 --- a/arch/tile/include/asm/uaccess.h +++ b/arch/tile/include/asm/uaccess.h @@ -146,7 +146,7 @@ extern int fixup_exception(struct pt_regs *regs); #ifdef __tilegx__ #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret) #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret) -#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret) +#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret) #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret) #else #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret) diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h index 43876f16caf1..cb00ccc7d571 100644 --- a/arch/x86/include/asm/pgtable-3level.h +++ b/arch/x86/include/asm/pgtable-3level.h @@ -47,16 +47,26 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte) * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd * operations. * - * Without THP if the mmap_sem is hold for reading, the - * pmd can only transition from null to not null while pmd_read_atomic runs. - * So there's no need of literally reading it atomically. + * Without THP if the mmap_sem is hold for reading, the pmd can only + * transition from null to not null while pmd_read_atomic runs. So + * we can always return atomic pmd values with this function. * * With THP if the mmap_sem is hold for reading, the pmd can become - * THP or null or point to a pte (and in turn become "stable") at any - * time under pmd_read_atomic, so it's mandatory to read it atomically - * with cmpxchg8b. + * trans_huge or none or point to a pte (and in turn become "stable") + * at any time under pmd_read_atomic. We could read it really + * atomically here with a atomic64_read for the THP enabled case (and + * it would be a whole lot simpler), but to avoid using cmpxchg8b we + * only return an atomic pmdval if the low part of the pmdval is later + * found stable (i.e. pointing to a pte). And we're returning a none + * pmdval if the low part of the pmd is none. In some cases the high + * and low part of the pmdval returned may not be consistent if THP is + * enabled (the low part may point to previously mapped hugepage, + * while the high part may point to a more recently mapped hugepage), + * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part + * of the pmd to be read atomically to decide if the pmd is unstable + * or not, with the only exception of when the low part of the pmd is + * zero in which case we return a none pmd. */ -#ifndef CONFIG_TRANSPARENT_HUGEPAGE static inline pmd_t pmd_read_atomic(pmd_t *pmdp) { pmdval_t ret; @@ -74,12 +84,6 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp) return (pmd_t) { ret }; } -#else /* CONFIG_TRANSPARENT_HUGEPAGE */ -static inline pmd_t pmd_read_atomic(pmd_t *pmdp) -{ - return (pmd_t) { atomic64_read((atomic64_t *)pmdp) }; -} -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) { diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c index 3c6e328483c7..028454f0c3a5 100644 --- a/arch/x86/platform/mrst/early_printk_mrst.c +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -110,19 +110,16 @@ static struct kmsg_dumper dw_dumper; static int dumper_registered; static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { - int i; + static char line[1024]; + size_t len; /* When run to this, we'd better re-init the HW */ mrst_early_console_init(); - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); + while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len)) + early_mrst_console.write(&early_mrst_console, line, len); } /* Set the ratio rate to 115200, 8n1, IRQ disabled */ diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 7608559de93a..f973754ddf90 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -68,8 +68,8 @@ endif # Only build variant and/or platform if it includes a Makefile -buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) -buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) +buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) +buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) # Find libgcc.a diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 88ecea3facb4..ee2e2089483d 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -83,7 +83,6 @@ SECTIONS _text = .; _stext = .; - _ftext = .; .text : { @@ -112,7 +111,7 @@ SECTIONS EXCEPTION_TABLE(16) /* Data section */ - _fdata = .; + _sdata = .; RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE) _edata = .; diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index ba150e5de2eb..db955179da2d 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -26,11 +26,7 @@ #include <asm/bootparam.h> #include <asm/page.h> - -/* References to section boundaries */ - -extern char _ftext, _etext, _fdata, _edata, _rodata_end; -extern char __init_begin, __init_end; +#include <asm/sections.h> /* * mem_reserve(start, end, must_exist) @@ -197,9 +193,9 @@ void __init mem_init(void) reservedpages++; } - codesize = (unsigned long) &_etext - (unsigned long) &_ftext; - datasize = (unsigned long) &_edata - (unsigned long) &_fdata; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + codesize = (unsigned long) _etext - (unsigned long) _stext; + datasize = (unsigned long) _edata - (unsigned long) _sdata; + initsize = (unsigned long) __init_end - (unsigned long) __init_begin; printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, " "%ldk data, %ldk init %ldk highmem)\n", @@ -237,7 +233,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) void free_initmem(void) { - free_reserved_mem(&__init_begin, &__init_end); - printk("Freeing unused kernel memory: %dk freed\n", - (&__init_end - &__init_begin) >> 10); + free_reserved_mem(__init_begin, __init_end); + printk("Freeing unused kernel memory: %zuk freed\n", + (__init_end - __init_begin) >> 10); } |