diff options
Diffstat (limited to 'arch')
194 files changed, 12216 insertions, 2972 deletions
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 8c71daf94a59..9fee37e2596f 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -75,6 +75,7 @@ osf_set_program_attributes(unsigned long text_start, unsigned long text_len, lock_kernel(); mm = current->mm; mm->end_code = bss_start + bss_len; + mm->start_brk = bss_start + bss_len; mm->brk = bss_start + bss_len; #if 0 printk("set_program_attributes(%lx %lx %lx %lx)\n", diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index c107cc08daf4..78357798b6fd 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -71,25 +71,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i static void __init quirk_cypress(struct pci_dev *dev) { - /* The Notorious Cy82C693 chip. */ - - /* The Cypress IDE controller doesn't support native mode, but it - has programmable addresses of IDE command/control registers. - This violates PCI specifications, confuses the IDE subsystem and - causes resource conflicts between the primary HD_CMD register and - the floppy controller. Ugh. Fix that. */ - if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) { - dev->resource[0].flags = 0; - dev->resource[1].flags = 0; - } - /* The Cypress bridge responds on the PCI bus in the address range 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no way to turn this off. The bridge also supports several extended BIOS ranges (disabled after power-up), and some consoles do turn them on. So if we use a large direct-map window, or a large SG window, we must avoid the entire 0xfff00000-0xffffffff region. */ - else if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) { + if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) { if (__direct_map_base + __direct_map_size >= 0xfff00000UL) __direct_map_size = 0xfff00000UL - __direct_map_base; else { @@ -391,7 +379,7 @@ pcibios_set_master(struct pci_dev *dev) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); } -static void __init +void __init pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; @@ -405,7 +393,8 @@ pcibios_claim_one_bus(struct pci_bus *b) if (r->parent || !r->start || !r->flags) continue; - pci_claim_resource(dev, i); + if (pci_probe_only || (r->flags & IORESOURCE_PCI_FIXED)) + pci_claim_resource(dev, i); } } @@ -444,8 +433,7 @@ common_init_pci(void) } } - if (pci_probe_only) - pcibios_claim_console_setup(); + pcibios_claim_console_setup(); pci_assign_unassigned_resources(); pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq); diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c index 920196bcbb61..a7f23b5ab814 100644 --- a/arch/alpha/kernel/sys_nautilus.c +++ b/arch/alpha/kernel/sys_nautilus.c @@ -187,6 +187,7 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr) } extern void free_reserved_mem(void *, void *); +extern void pcibios_claim_one_bus(struct pci_bus *); static struct resource irongate_mem = { .name = "Irongate PCI MEM", @@ -205,6 +206,7 @@ nautilus_init_pci(void) /* Scan our single hose. */ bus = pci_scan_bus(0, alpha_mv.pci_ops, hose); hose->bus = bus; + pcibios_claim_one_bus(bus); irongate = pci_get_bus_and_slot(0, 0); bus->self = irongate; diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c index 5235f64f235b..8508a0db3eaf 100644 --- a/arch/arm/mach-integrator/time.c +++ b/arch/arm/mach-integrator/time.c @@ -124,8 +124,11 @@ static int rtc_probe(struct amba_device *dev, void *id) xtime.tv_sec = __raw_readl(rtc_base + RTC_DR); + /* note that 'dev' is merely used for irq disambiguation; + * it is not actually referenced in the irq handler + */ ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED, - "rtc-pl030", NULL); + "rtc-pl030", dev); if (ret) goto map_out; diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index 6d26661d99f6..2ef7d0097b38 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -75,10 +75,9 @@ static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc) { u32 mask = CPLD_LATCHED_INTS; irq = IRQ_KEV7A400_CPLD; - for (; mask; mask >>= 1, ++irq) { + for (; mask; mask >>= 1, ++irq) if (mask & 1) - desc[irq].handle (irq, desc); - } + desc_handle_irq(irq, desc); } void __init lh7a40x_init_board_irq (void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 746cbb7c8e95..1b8229d9c9d5 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -32,6 +32,7 @@ config CPU_ARM7TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4 help A 32-bit RISC microprocessor based on the ARM7 processor core @@ -85,6 +86,7 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V3 # although the core is v4t select CPU_CP15_MPU help @@ -101,6 +103,7 @@ config CPU_ARM9TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU + select CPU_PABRT_NOIFAR select CPU_CACHE_V4 help A 32-bit RISC microprocessor based on the ARM9 processor core @@ -200,6 +203,7 @@ config CPU_ARM940T depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MPU help @@ -217,6 +221,7 @@ config CPU_ARM946E depends on !MMU select CPU_32v5 select CPU_ABRT_NOMMU + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MPU help @@ -351,6 +356,7 @@ config CPU_XSC3 default y select CPU_32v5 select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 32fd7ea533f2..5673f4d6113b 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -471,6 +471,7 @@ arm1020_crval: .type arm1020_processor_functions, #object arm1020_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm1020_proc_init .word cpu_arm1020_proc_fin .word cpu_arm1020_reset @@ -478,7 +479,6 @@ arm1020_processor_functions: .word cpu_arm1020_dcache_clean_area .word cpu_arm1020_switch_mm .word cpu_arm1020_set_pte_ext - .word pabort_noifar .size arm1020_processor_functions, . - arm1020_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index fe2b0ae70274..4343fdb0e9e5 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -452,6 +452,7 @@ arm1020e_crval: .type arm1020e_processor_functions, #object arm1020e_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm1020e_proc_init .word cpu_arm1020e_proc_fin .word cpu_arm1020e_reset @@ -459,7 +460,6 @@ arm1020e_processor_functions: .word cpu_arm1020e_dcache_clean_area .word cpu_arm1020e_switch_mm .word cpu_arm1020e_set_pte_ext - .word pabort_noifar .size arm1020e_processor_functions, . - arm1020e_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 06dde678e19d..2a4ea1659e96 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -435,6 +435,7 @@ arm1022_crval: .type arm1022_processor_functions, #object arm1022_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm1022_proc_init .word cpu_arm1022_proc_fin .word cpu_arm1022_reset @@ -442,7 +443,6 @@ arm1022_processor_functions: .word cpu_arm1022_dcache_clean_area .word cpu_arm1022_switch_mm .word cpu_arm1022_set_pte_ext - .word pabort_noifar .size arm1022_processor_functions, . - arm1022_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index f5506e6e681e..77a1babd421c 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -430,6 +430,7 @@ arm1026_crval: .type arm1026_processor_functions, #object arm1026_processor_functions: .word v5t_early_abort + .word pabort_noifar .word cpu_arm1026_proc_init .word cpu_arm1026_proc_fin .word cpu_arm1026_reset @@ -437,7 +438,6 @@ arm1026_processor_functions: .word cpu_arm1026_dcache_clean_area .word cpu_arm1026_switch_mm .word cpu_arm1026_set_pte_ext - .word pabort_noifar .size arm1026_processor_functions, . - arm1026_processor_functions .section .rodata diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 14b6a95c8d45..c371fc87776e 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -293,6 +293,7 @@ __arm7_setup: mov r0, #0 .type arm6_processor_functions, #object ENTRY(arm6_processor_functions) .word cpu_arm6_data_abort + .word pabort_noifar .word cpu_arm6_proc_init .word cpu_arm6_proc_fin .word cpu_arm6_reset @@ -300,7 +301,6 @@ ENTRY(arm6_processor_functions) .word cpu_arm6_dcache_clean_area .word cpu_arm6_switch_mm .word cpu_arm6_set_pte_ext - .word pabort_noifar .size arm6_processor_functions, . - arm6_processor_functions /* @@ -310,6 +310,7 @@ ENTRY(arm6_processor_functions) .type arm7_processor_functions, #object ENTRY(arm7_processor_functions) .word cpu_arm7_data_abort + .word pabort_noifar .word cpu_arm7_proc_init .word cpu_arm7_proc_fin .word cpu_arm7_reset @@ -317,7 +318,6 @@ ENTRY(arm7_processor_functions) .word cpu_arm7_dcache_clean_area .word cpu_arm7_switch_mm .word cpu_arm7_set_pte_ext - .word pabort_noifar .size arm7_processor_functions, . - arm7_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index ca5e7aac2da7..d64f8e6f75ab 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -198,6 +198,7 @@ arm720_crval: .type arm720_processor_functions, #object ENTRY(arm720_processor_functions) .word v4t_late_abort + .word pabort_noifar .word cpu_arm720_proc_init .word cpu_arm720_proc_fin .word cpu_arm720_reset @@ -205,7 +206,6 @@ ENTRY(arm720_processor_functions) .word cpu_arm720_dcache_clean_area .word cpu_arm720_switch_mm .word cpu_arm720_set_pte_ext - .word pabort_noifar .size arm720_processor_functions, . - arm720_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 7069f495cf9b..3a57376c8bc9 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -126,6 +126,7 @@ __arm740_setup: .type arm740_processor_functions, #object ENTRY(arm740_processor_functions) .word v4t_late_abort + .word pabort_noifar .word cpu_arm740_proc_init .word cpu_arm740_proc_fin .word cpu_arm740_reset diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index d091c2571823..7b3ecdeb5370 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -64,6 +64,7 @@ __arm7tdmi_setup: .type arm7tdmi_processor_functions, #object ENTRY(arm7tdmi_processor_functions) .word v4t_late_abort + .word pabort_noifar .word cpu_arm7tdmi_proc_init .word cpu_arm7tdmi_proc_fin .word cpu_arm7tdmi_reset diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 0170d4f466ea..28cdb060df45 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -417,6 +417,7 @@ arm920_crval: .type arm920_processor_functions, #object arm920_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm920_proc_init .word cpu_arm920_proc_fin .word cpu_arm920_reset @@ -424,7 +425,6 @@ arm920_processor_functions: .word cpu_arm920_dcache_clean_area .word cpu_arm920_switch_mm .word cpu_arm920_set_pte_ext - .word pabort_noifar .size arm920_processor_functions, . - arm920_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index b7952493d404..94ddcb4a4b76 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -421,6 +421,7 @@ arm922_crval: .type arm922_processor_functions, #object arm922_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm922_proc_init .word cpu_arm922_proc_fin .word cpu_arm922_reset @@ -428,7 +429,6 @@ arm922_processor_functions: .word cpu_arm922_dcache_clean_area .word cpu_arm922_switch_mm .word cpu_arm922_set_pte_ext - .word pabort_noifar .size arm922_processor_functions, . - arm922_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index e2988eba4cf6..065087afb772 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -484,6 +484,7 @@ arm925_crval: .type arm925_processor_functions, #object arm925_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm925_proc_init .word cpu_arm925_proc_fin .word cpu_arm925_reset @@ -491,7 +492,6 @@ arm925_processor_functions: .word cpu_arm925_dcache_clean_area .word cpu_arm925_switch_mm .word cpu_arm925_set_pte_ext - .word pabort_noifar .size arm925_processor_functions, . - arm925_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 62f7d1dfe016..997db8472b5c 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -437,6 +437,7 @@ arm926_crval: .type arm926_processor_functions, #object arm926_processor_functions: .word v5tj_early_abort + .word pabort_noifar .word cpu_arm926_proc_init .word cpu_arm926_proc_fin .word cpu_arm926_reset @@ -444,7 +445,6 @@ arm926_processor_functions: .word cpu_arm926_dcache_clean_area .word cpu_arm926_switch_mm .word cpu_arm926_set_pte_ext - .word pabort_noifar .size arm926_processor_functions, . - arm926_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 786c593778f0..44ead902bd54 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -321,6 +321,7 @@ __arm940_setup: .type arm940_processor_functions, #object ENTRY(arm940_processor_functions) .word nommu_early_abort + .word pabort_noifar .word cpu_arm940_proc_init .word cpu_arm940_proc_fin .word cpu_arm940_reset diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index a60c1421d450..2218b0c01330 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -376,6 +376,7 @@ __arm946_setup: .type arm946_processor_functions, #object ENTRY(arm946_processor_functions) .word nommu_early_abort + .word pabort_noifar .word cpu_arm946_proc_init .word cpu_arm946_proc_fin .word cpu_arm946_reset diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 4848eeac86b6..c85c1f50e396 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -64,6 +64,7 @@ __arm9tdmi_setup: .type arm9tdmi_processor_functions, #object ENTRY(arm9tdmi_processor_functions) .word nommu_early_abort + .word pabort_noifar .word cpu_arm9tdmi_proc_init .word cpu_arm9tdmi_proc_fin .word cpu_arm9tdmi_reset diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 2f169b28e938..90e7594e29b1 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -423,6 +423,7 @@ feroceon_crval: .type feroceon_processor_functions, #object feroceon_processor_functions: .word v5t_early_abort + .word pabort_noifar .word cpu_feroceon_proc_init .word cpu_feroceon_proc_fin .word cpu_feroceon_reset @@ -430,7 +431,6 @@ feroceon_processor_functions: .word cpu_feroceon_dcache_clean_area .word cpu_feroceon_switch_mm .word cpu_feroceon_set_pte_ext - .word pabort_noifar .size feroceon_processor_functions, . - feroceon_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 4db3d6299a2b..9818195dbf11 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -216,6 +216,7 @@ sa110_crval: .type sa110_processor_functions, #object ENTRY(sa110_processor_functions) .word v4_early_abort + .word pabort_noifar .word cpu_sa110_proc_init .word cpu_sa110_proc_fin .word cpu_sa110_reset @@ -223,7 +224,6 @@ ENTRY(sa110_processor_functions) .word cpu_sa110_dcache_clean_area .word cpu_sa110_switch_mm .word cpu_sa110_set_pte_ext - .word pabort_noifar .size sa110_processor_functions, . - sa110_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 3cdef043760f..c5fe27ad2892 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -231,6 +231,7 @@ sa1100_crval: .type sa1100_processor_functions, #object ENTRY(sa1100_processor_functions) .word v4_early_abort + .word pabort_noifar .word cpu_sa1100_proc_init .word cpu_sa1100_proc_fin .word cpu_sa1100_reset @@ -238,7 +239,6 @@ ENTRY(sa1100_processor_functions) .word cpu_sa1100_dcache_clean_area .word cpu_sa1100_switch_mm .word cpu_sa1100_set_pte_ext - .word pabort_noifar .size sa1100_processor_functions, . - sa1100_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index bf760ea2f789..5702ec58b2a2 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -219,6 +219,7 @@ v6_crval: .type v6_processor_functions, #object ENTRY(v6_processor_functions) .word v6_early_abort + .word pabort_noifar .word cpu_v6_proc_init .word cpu_v6_proc_fin .word cpu_v6_reset @@ -226,7 +227,6 @@ ENTRY(v6_processor_functions) .word cpu_v6_dcache_clean_area .word cpu_v6_switch_mm .word cpu_v6_set_pte_ext - .word pabort_noifar .size v6_processor_functions, . - v6_processor_functions .type cpu_arch_name, #object diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a1d7331cd64c..b49f9a4c82c8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -205,6 +205,7 @@ __v7_setup_stack: .type v7_processor_functions, #object ENTRY(v7_processor_functions) .word v7_early_abort + .word pabort_ifar .word cpu_v7_proc_init .word cpu_v7_proc_fin .word cpu_v7_reset @@ -212,7 +213,6 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext - .word pabort_ifar .size v7_processor_functions, . - v7_processor_functions .type cpu_arch_name, #object diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index d95921a2ab99..3533741a76f6 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -450,6 +450,7 @@ xsc3_crval: .type xsc3_processor_functions, #object ENTRY(xsc3_processor_functions) .word v5t_early_abort + .word pabort_noifar .word cpu_xsc3_proc_init .word cpu_xsc3_proc_fin .word cpu_xsc3_reset diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 1a6d89823dff..2dd85273976f 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -527,6 +527,7 @@ xscale_crval: .type xscale_processor_functions, #object ENTRY(xscale_processor_functions) .word v5t_early_abort + .word pabort_noifar .word cpu_xscale_proc_init .word cpu_xscale_proc_fin .word cpu_xscale_reset @@ -534,7 +535,6 @@ ENTRY(xscale_processor_functions) .word cpu_xscale_dcache_clean_area .word cpu_xscale_switch_mm .word cpu_xscale_set_pte_ext - .word pabort_noifar .size xscale_processor_functions, . - xscale_processor_functions .section ".rodata" diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 2dd1f300a5cf..795d0ac67c21 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -47,10 +47,6 @@ config GENERIC_IRQ_PROBE bool default y -config GENERIC_TIME - bool - default n - config GENERIC_GPIO bool default y @@ -224,16 +220,6 @@ config BF54x depends on (BF542 || BF544 || BF547 || BF548 || BF549) default y -config BFIN_DUAL_CORE - bool - depends on (BF561) - default y - -config BFIN_SINGLE_CORE - bool - depends on !BFIN_DUAL_CORE - default y - config MEM_GENERIC_BOARD bool depends on GENERIC_BOARD @@ -263,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT) + depends on (BFIN527_EZKIT || BFIN532_IP0X) default y source "arch/blackfin/mach-bf527/Kconfig" @@ -286,17 +272,34 @@ config CMDLINE to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). +config BOOT_LOAD + hex "Kernel load address for booting" + default "0x1000" + range 0x1000 0x20000000 + help + This option allows you to set the load address of the kernel. + This can be useful if you are on a board which has a small amount + of memory or you wish to reserve some memory at the beginning of + the address space. + + Note that you need to keep this value above 4k (0x1000) as this + memory region is used to capture NULL pointer references as well + as some core kernel functions. + comment "Clock/PLL Setup" config CLKIN_HZ - int "Crystal Frequency in Hz" + int "Frequency of the crystal on the board in Hz" default "11059200" if BFIN533_STAMP default "27000000" if BFIN533_EZKIT default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS) default "30000000" if BFIN561_EZKIT default "24576000" if PNAV10 + default "10000000" if BFIN532_IP0X help The frequency of CLKIN crystal oscillator on the board in Hz. + Warning: This value should match the crystal on the board. Otherwise, + peripherals won't work properly. config BFIN_KERNEL_CLOCK bool "Re-program Clocks while Kernel boots?" @@ -307,6 +310,25 @@ config BFIN_KERNEL_CLOCK are also not changed, and the Bootloader does 100% of the hardware configuration. +config MEM_SIZE + int "SDRAM Memory Size in MBytes" + depends on BFIN_KERNEL_CLOCK + default 64 + +config MEM_ADD_WIDTH + int "Memory Address Width" + depends on BFIN_KERNEL_CLOCK + depends on (!BF54x) + range 8 11 + default 9 if BFIN533_EZKIT + default 9 if BFIN561_EZKIT + default 9 if H8606_HVSISTEMAS + default 10 if BFIN527_EZKIT + default 10 if BFIN537_STAMP + default 11 if BFIN533_STAMP + default 10 if PNAV10 + default 10 if BFIN532_IP0X + config PLL_BYPASS bool "Bypass PLL" depends on BFIN_KERNEL_CLOCK @@ -325,7 +347,7 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM) default "22" if BFIN533_BLUETECHNIX_CM default "20" if BFIN537_BLUETECHNIX_CM default "20" if BFIN561_BLUETECHNIX_CM @@ -360,19 +382,33 @@ config SCLK_DIV int "System Clock Divider" depends on BFIN_KERNEL_CLOCK range 1 15 - default 5 if BFIN533_EZKIT - default 5 if BFIN533_STAMP - default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) - default 5 if BFIN533_BLUETECHNIX_CM - default 4 if BFIN537_BLUETECHNIX_CM - default 4 if BFIN561_BLUETECHNIX_CM - default 5 if BFIN561_EZKIT - default 3 if H8606_HVSISTEMAS + default 5 help This sets the frequency of the system clock (including SDRAM or DDR). This can be between 1 and 15 System Clock = (PLL frequency) / (this setting) +config MAX_MEM_SIZE + int "Max SDRAM Memory Size in MBytes" + depends on !BFIN_KERNEL_CLOCK && !MPU + default 512 + help + This is the max memory size that the kernel will create CPLB + tables for. Your system will not be able to handle any more. + +choice + prompt "DDR SDRAM Chip Type" + depends on BFIN_KERNEL_CLOCK + depends on BF54x + default MEM_MT46V32M16_5B + +config MEM_MT46V32M16_6T + bool "MT46V32M16_6T" + +config MEM_MT46V32M16_5B + bool "MT46V32M16_5B" +endchoice + # # Max & Min Speeds for various Chips # @@ -415,42 +451,33 @@ comment "Kernel Timer/Scheduler" source kernel/Kconfig.hz -comment "Memory Setup" - -config MEM_SIZE - int "SDRAM Memory Size in MBytes" - default 32 if BFIN533_EZKIT - default 64 if BFIN527_EZKIT - default 64 if BFIN537_STAMP - default 64 if BFIN548_EZKIT - default 64 if BFIN561_EZKIT - default 128 if BFIN533_STAMP - default 64 if PNAV10 - default 32 if H8606_HVSISTEMAS +config GENERIC_TIME + bool "Generic time" + default y -config MEM_ADD_WIDTH - int "SDRAM Memory Address Width" - depends on (!BF54x) - default 9 if BFIN533_EZKIT - default 9 if BFIN561_EZKIT - default 9 if H8606_HVSISTEMAS - default 10 if BFIN527_EZKIT - default 10 if BFIN537_STAMP - default 11 if BFIN533_STAMP - default 10 if PNAV10 +config GENERIC_CLOCKEVENTS + bool "Generic clock events" + depends on GENERIC_TIME + default y +config CYCLES_CLOCKSOURCE + bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on GENERIC_CLOCKEVENTS + depends on !BFIN_SCRATCH_REG_CYCLES + default n + help + If you say Y here, you will enable support for using the 'cycles' + registers as a clock source. Doing so means you will be unable to + safely write to the 'cycles' register during runtime. You will + still be able to read it (such as for performance monitoring), but + writing the registers will most likely crash the kernel. -choice - prompt "DDR SDRAM Chip Type" - depends on BFIN548_EZKIT - default MEM_MT46V32M16_5B +source kernel/time/Kconfig -config MEM_MT46V32M16_6T - bool "MT46V32M16_6T" +comment "Memory Setup" -config MEM_MT46V32M16_5B - bool "MT46V32M16_5B" -endchoice +comment "Misc" config ENET_FLASH_PIN int "PF port/pin used for flash and ethernet sharing" @@ -462,20 +489,6 @@ config ENET_FLASH_PIN code. For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc. -config BOOT_LOAD - hex "Kernel load address for booting" - default "0x1000" - range 0x1000 0x20000000 - help - This option allows you to set the load address of the kernel. - This can be useful if you are on a board which has a small amount - of memory or you wish to reserve some memory at the beginning of - the address space. - - Note that you need to keep this value above 4k (0x1000) as this - memory region is used to capture NULL pointer references as well - as some core kernel functions. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN @@ -661,14 +674,6 @@ endchoice source "mm/Kconfig" -config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large - memory sizes - upto 32MB. You may need this if your system has - a lot of RAM, and you need to able to allocate very large - contiguous chunks. If unsure, say N. - config BFIN_GPTIMERS tristate "Enable Blackfin General Purpose Timers API" default n diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 75eba2ca7881..3cbe16caad4b 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -72,6 +72,11 @@ rev-$(CONFIG_BF_REV_ANY) := any KBUILD_CFLAGS += -mcpu=$(cpu-y)-$(rev-y) KBUILD_AFLAGS += -mcpu=$(cpu-y)-$(rev-y) +# - we utilize the silicon rev from the toolchain, so move it over to the checkflags +# - the l1_text attribute is Blackfin specific, so fake it out as used to kill warnings +CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }') +CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__ + head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/ diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore new file mode 100644 index 000000000000..3ae03994b88d --- /dev/null +++ b/arch/blackfin/boot/.gitignore @@ -0,0 +1 @@ ++vmImage diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index ae320dcfedef..64876dfc2e55 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -250,7 +250,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y @@ -720,8 +720,8 @@ CONFIG_BFIN_OTP=y # CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_SERIAL_BFIN_DMA is not set -CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 9621caa60b5f..8d817ba01945 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -212,7 +212,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=32 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index b51e76ce7f4f..20d598d17bd1 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -212,7 +212,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=128 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 CONFIG_BOOT_LOAD=0x1000 diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index d45fa535dad7..b5189c8ba263 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -220,7 +220,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index c9707f7665ad..5bfdfb287d13 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -285,7 +285,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 # CONFIG_MEM_MT46V32M16_6T is not set CONFIG_MEM_MT46V32M16_5B=y CONFIG_BOOT_LOAD=0x1000 @@ -813,8 +813,8 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_SERIAL_BFIN_DMA is not set -CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 4d8a63331309..b4a20c890816 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -256,7 +256,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig new file mode 100644 index 000000000000..560890fe0d30 --- /dev/null +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -0,0 +1,912 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.16 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +CONFIG_BF533=y +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +CONFIG_BFIN533_BLUETECHNIX_CM=y +# CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=750000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig new file mode 100644 index 000000000000..9f66d2de1007 --- /dev/null +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -0,0 +1,940 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.16 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig new file mode 100644 index 000000000000..2694d06c5bde --- /dev/null +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -0,0 +1,940 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.16 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=30000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0xFFC3 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_BFIN_MAC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig new file mode 100644 index 000000000000..90207251c533 --- /dev/null +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -0,0 +1,1373 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.4 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +CONFIG_BF548=y +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF54x=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_CNT=8 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 +CONFIG_IRQ_TIMER0=11 +CONFIG_IRQ_TIMER1=11 +CONFIG_IRQ_TIMER2=11 +CONFIG_IRQ_TIMER3=11 +CONFIG_IRQ_TIMER4=11 +CONFIG_IRQ_TIMER5=11 +CONFIG_IRQ_TIMER6=11 +CONFIG_IRQ_TIMER7=11 +CONFIG_IRQ_TIMER8=11 +CONFIG_IRQ_TIMER9=11 +CONFIG_IRQ_TIMER10=11 +# CONFIG_BFIN548_EZKIT is not set +CONFIG_BFIN548_BLUETECHNIX_CM=y + +# +# BF548 Specific Configuration +# +# CONFIG_DEB_DMA_URGENT is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMAC0_ERR=7 +CONFIG_IRQ_EPPI0_ERR=7 +CONFIG_IRQ_SPORT0_ERR=7 +CONFIG_IRQ_SPORT1_ERR=7 +CONFIG_IRQ_SPI0_ERR=7 +CONFIG_IRQ_UART0_ERR=7 +CONFIG_IRQ_EPPI0=8 +CONFIG_IRQ_SPI0=10 +CONFIG_IRQ_PINT0=12 +CONFIG_IRQ_PINT1=12 +CONFIG_IRQ_MDMAS0=13 +CONFIG_IRQ_MDMAS1=13 +CONFIG_IRQ_WATCHDOG=13 +CONFIG_IRQ_DMAC1_ERR=7 +CONFIG_IRQ_SPORT2_ERR=7 +CONFIG_IRQ_SPORT3_ERR=7 +CONFIG_IRQ_MXVR_DATA=7 +CONFIG_IRQ_SPI1_ERR=7 +CONFIG_IRQ_SPI2_ERR=7 +CONFIG_IRQ_UART1_ERR=7 +CONFIG_IRQ_UART2_ERR=7 +CONFIG_IRQ_CAN0_ERR=7 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_EPPI1=9 +CONFIG_IRQ_EPPI2=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_ATAPI_RX=10 +CONFIG_IRQ_ATAPI_TX=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 +CONFIG_IRQ_CAN0_RX=11 +CONFIG_IRQ_CAN0_TX=11 +CONFIG_IRQ_MDMAS2=13 +CONFIG_IRQ_MDMAS3=13 +CONFIG_IRQ_MXVR_ERR=11 +CONFIG_IRQ_MXVR_MSG=11 +CONFIG_IRQ_MXVR_PKT=11 +CONFIG_IRQ_EPPI1_ERR=7 +CONFIG_IRQ_EPPI2_ERR=7 +CONFIG_IRQ_UART3_ERR=7 +CONFIG_IRQ_HOST_ERR=7 +CONFIG_IRQ_PIXC_ERR=7 +CONFIG_IRQ_NFC_ERR=7 +CONFIG_IRQ_ATAPI_ERR=7 +CONFIG_IRQ_CAN1_ERR=7 +CONFIG_IRQ_HS_DMA_ERR=7 +CONFIG_IRQ_PIXC_IN0=8 +CONFIG_IRQ_PIXC_IN1=8 +CONFIG_IRQ_PIXC_OUT=8 +CONFIG_IRQ_SDH=8 +CONFIG_IRQ_KEY=8 +CONFIG_IRQ_CAN1_RX=11 +CONFIG_IRQ_CAN1_TX=11 +CONFIG_IRQ_SDH_MASK0=11 +CONFIG_IRQ_SDH_MASK1=11 +CONFIG_IRQ_OTPSEC=11 +CONFIG_IRQ_PINT2=11 +CONFIG_IRQ_PINT3=11 + +# +# Pin Interrupt to Port Assignment +# + +# +# Assignment +# +CONFIG_PINTx_REASSIGN=y +CONFIG_PINT0_ASSIGN=0x00000101 +CONFIG_PINT1_ASSIGN=0x01010000 +CONFIG_PINT2_ASSIGN=0x07000101 +CONFIG_PINT3_ASSIGN=0x02020303 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_GENERIC_TIME is not set +# CONFIG_TICK_ONESHOT is not set + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=64 +# CONFIG_MEM_MT46V32M16_6T is not set +CONFIG_MEM_MT46V32M16_5B=y +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +# CONFIG_C_CDPRIO is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x5554 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 +CONFIG_EBIU_MBSCTLVAL=0x0 +CONFIG_EBIU_MODEVAL=0x1 +CONFIG_EBIU_FCTLVAL=0x6 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_SMSC911X=y +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_BFIN is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y +# CONFIG_SERIAL_BFIN_UART0 is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART2 is not set +# CONFIG_SERIAL_BFIN_UART3 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin BF54x, BF525 and BF527 high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +# CONFIG_USB_INVENTRA_DMA is not set +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_SDH_BFIN=y +# CONFIG_MMC_SPI is not set +# CONFIG_SPI_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig new file mode 100644 index 000000000000..daf00906c1ef --- /dev/null +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -0,0 +1,876 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.4 +# Tue Apr 1 10:50:11 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +CONFIG_BF561=y +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BFIN_DUAL_CORE=y +CONFIG_MEM_MT48LC8M32B2B5_7=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_SPI_ERROR=7 +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +CONFIG_BFIN561_BLUETECHNIX_CM=y +# CONFIG_GENERIC_BF561_BOARD is not set + +# +# BF561 Specific Configuration +# + +# +# Core B Support +# + +# +# Core B Support +# +CONFIG_BF561_COREB=y +# CONFIG_BF561_COREB_RESET is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA1_ERROR=7 +CONFIG_IRQ_DMA2_ERROR=7 +CONFIG_IRQ_IMDMA_ERROR=7 +CONFIG_IRQ_PPI0_ERROR=7 +CONFIG_IRQ_PPI1_ERROR=7 +CONFIG_IRQ_UART_ERROR=7 +CONFIG_IRQ_RESERVED_ERROR=7 +CONFIG_IRQ_DMA1_0=8 +CONFIG_IRQ_DMA1_1=8 +CONFIG_IRQ_DMA1_2=8 +CONFIG_IRQ_DMA1_3=8 +CONFIG_IRQ_DMA1_4=8 +CONFIG_IRQ_DMA1_5=8 +CONFIG_IRQ_DMA1_6=8 +CONFIG_IRQ_DMA1_7=8 +CONFIG_IRQ_DMA1_8=8 +CONFIG_IRQ_DMA1_9=8 +CONFIG_IRQ_DMA1_10=8 +CONFIG_IRQ_DMA1_11=8 +CONFIG_IRQ_DMA2_0=9 +CONFIG_IRQ_DMA2_1=9 +CONFIG_IRQ_DMA2_2=9 +CONFIG_IRQ_DMA2_3=9 +CONFIG_IRQ_DMA2_4=9 +CONFIG_IRQ_DMA2_5=9 +CONFIG_IRQ_DMA2_6=9 +CONFIG_IRQ_DMA2_7=9 +CONFIG_IRQ_DMA2_8=9 +CONFIG_IRQ_DMA2_9=9 +CONFIG_IRQ_DMA2_10=9 +CONFIG_IRQ_DMA2_11=9 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 +CONFIG_IRQ_TIMER8=10 +CONFIG_IRQ_TIMER9=10 +CONFIG_IRQ_TIMER10=10 +CONFIG_IRQ_TIMER11=10 +CONFIG_IRQ_PROG0_INTA=11 +CONFIG_IRQ_PROG0_INTB=11 +CONFIG_IRQ_PROG1_INTA=11 +CONFIG_IRQ_PROG1_INTB=11 +CONFIG_IRQ_PROG2_INTA=11 +CONFIG_IRQ_PROG2_INTB=11 +CONFIG_IRQ_DMA1_WRRD0=8 +CONFIG_IRQ_DMA1_WRRD1=8 +CONFIG_IRQ_DMA2_WRRD0=9 +CONFIG_IRQ_DMA2_WRRD1=9 +CONFIG_IRQ_IMDMA_WRRD0=12 +CONFIG_IRQ_IMDMA_WRRD1=12 +CONFIG_IRQ_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +CONFIG_C_B0PEN=y +CONFIG_C_B1PEN=y +CONFIG_C_B2PEN=y +# CONFIG_C_B3PEN is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set +# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE0 is not set +# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE1 is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DUAL_CORE_TEST_MODULE is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 18cbb8c3c373..679c7483ea71 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -207,7 +207,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=32 +CONFIG_MAX_MEM_SIZE=32 CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig new file mode 100644 index 000000000000..5f6ff04a86c3 --- /dev/null +++ b/arch/blackfin/configs/IP0X_defconfig @@ -0,0 +1,1252 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.18 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +CONFIG_BF532=y +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC32M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_H8606_HVSISTEMAS is not set +CONFIG_BFIN532_IP0X=y +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=10000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 + +# +# Hardware addresses +# +CONFIG_IP0X_NET1=0x20100000 +CONFIG_IP0X_NET2=0x20200000 +CONFIG_IP0X_USB=0x20300000 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +# CONFIG_BFIN_ICACHE is not set +# CONFIG_BFIN_DCACHE is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0xffc2 +CONFIG_BANK_1=0xffc2 +CONFIG_BANK_2=0xffc2 +CONFIG_BANK_3=0xffc2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +CONFIG_NETFILTER_XT_MATCH_MAC=y +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_IPRANGE=y +CONFIG_IP_NF_MATCH_TOS=y +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_TOS=y +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_UCLINUX=y +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_BFIN=y +CONFIG_BFIN_NAND_BASE=0x20000000 +CONFIG_BFIN_NAND_SIZE=0x10000000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=10 +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +CONFIG_DM9000=y +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_AD5304 is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BFIN_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_ISP1362_HCD=y +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_SPI_MMC=m +CONFIG_SPI_MMC_FRAMEWORK_DRIVER=y +# CONFIG_SPI_MMC_BFIN_PIO_SPI is not set +CONFIG_SPI_MMC_CS_CHAN=5 +CONFIG_SPI_MMC_MAX_HZ=20000000 +# CONFIG_SPI_MMC_CARD_DETECT is not set +# CONFIG_SPI_MMC_DEBUG_MODE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=m +# CONFIG_SECURITY_ROOTPLUG is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 25709f504d8f..87622ad9df47 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -214,7 +214,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=64 CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig new file mode 100644 index 000000000000..951ea0412576 --- /dev/null +++ b/arch/blackfin/configs/SRV1_defconfig @@ -0,0 +1,1290 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.10 +# Fri Nov 2 20:50:23 2007 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN527_EZKIT is not set +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN537_STAMP is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN548_EZKIT is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +# CONFIG_PNAV10 is not set +# CONFIG_VISTASCAN is not set +# CONFIG_BFIN533_SR3K is not set +CONFIG_GENERIC_BOARD=y +CONFIG_MEM_GENERIC_BOARD=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=22118400 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x400000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +CONFIG_DMA_UNCACHED_2M=y +# CONFIG_DMA_UNCACHED_1M is not set +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_BFIN=m +CONFIG_BFIN_NAND_BASE=0x20212000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=3 +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y +# CONFIG_BF53X_PFBUTTONS is not set +# CONFIG_TWI_KEYPAD is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +CONFIG_BF5xx_PFLAGS=y +# CONFIG_BF5xx_PFLAGS_PROC is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set +# CONFIG_BF5xx_FBDMA is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y +CONFIG_HW_RANDOM=m +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_BLACKFIN_GPIO is not set +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=m +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=m +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +# CONFIG_VIDEO_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_PPI_GENERIC is not set +CONFIG_VIDEO_BLACKFIN_CAM=m +# CONFIG_VIDEO_BLACKFIN_MT9M001 is not set + +# +# CMOS Camera Sensor Selection +# +# CONFIG_MT9V022 is not set +# CONFIG_MT9M001 is not set +# CONFIG_VS6524 is not set +# CONFIG_VS6624 is not set +CONFIG_OV9655=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_HWERR is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 318b9b692a48..6140cd69c782 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -6,9 +6,15 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ - sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ + sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ fixed_code.o reboot.o bfin_gpio.o +ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) + obj-y += time-ts.o +else + obj-y += time.o +endif + obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 8fd5d22cec34..fd5448d6107c 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -67,7 +67,7 @@ static int __init blackfin_dma_init(void) for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { dma_ch[i].chan_status = DMA_CHANNEL_FREE; - dma_ch[i].regs = base_addr[i]; + dma_ch[i].regs = dma_io_base_addr[i]; mutex_init(&(dma_ch[i].dmalock)); } /* Mark MEMDMA Channel 0 as requested since we're using it internally */ @@ -106,12 +106,15 @@ int request_dma(unsigned int channel, char *device_id) #ifdef CONFIG_BF54x if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { - if (strncmp(device_id, "BFIN_UART", 9) == 0) + if (strncmp(device_id, "BFIN_UART", 9) == 0) { + dma_ch[channel].regs->peripheral_map &= 0x0FFF; dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0xC); - else + ((channel - CH_UART2_RX + 0xC)<<12); + } else { + dma_ch[channel].regs->peripheral_map &= 0x0FFF; dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0x6); + ((channel - CH_UART2_RX + 0x6)<<12); + } } #endif diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 08788f7bbfba..7e8eaf4a31bb 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -95,14 +95,14 @@ enum { AWA_data_clear = SYSCR, AWA_data_set = SYSCR, AWA_toggle = SYSCR, - AWA_maska = UART_SCR, - AWA_maska_clear = UART_SCR, - AWA_maska_set = UART_SCR, - AWA_maska_toggle = UART_SCR, - AWA_maskb = UART_GCTL, - AWA_maskb_clear = UART_GCTL, - AWA_maskb_set = UART_GCTL, - AWA_maskb_toggle = UART_GCTL, + AWA_maska = BFIN_UART_SCR, + AWA_maska_clear = BFIN_UART_SCR, + AWA_maska_set = BFIN_UART_SCR, + AWA_maska_toggle = BFIN_UART_SCR, + AWA_maskb = BFIN_UART_GCTL, + AWA_maskb_clear = BFIN_UART_GCTL, + AWA_maskb_set = BFIN_UART_GCTL, + AWA_maskb_toggle = BFIN_UART_GCTL, AWA_dir = SPORT1_STAT, AWA_polar = SPORT1_STAT, AWA_edge = SPORT1_STAT, @@ -348,11 +348,10 @@ static void portmux_setup(unsigned short per, unsigned short function) offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); - if (offset != 1) { + if (offset != 1) muxreg &= ~(1 << offset); - } else { + else muxreg &= ~(3 << 1); - } muxreg |= (function << offset); bfin_write_PORT_MUX(muxreg); @@ -396,39 +395,11 @@ inline void portmux_setup(unsigned short portno, unsigned short function) # define portmux_setup(...) do { } while (0) #endif -#ifndef BF548_FAMILY -static void default_gpio(unsigned gpio) -{ - unsigned short bank, bitmask; - unsigned long flags; - - bank = gpio_bank(gpio); - bitmask = gpio_bit(gpio); - - local_irq_save(flags); - - gpio_bankb[bank]->maska_clear = bitmask; - gpio_bankb[bank]->maskb_clear = bitmask; - SSYNC(); - gpio_bankb[bank]->inen &= ~bitmask; - gpio_bankb[bank]->dir &= ~bitmask; - gpio_bankb[bank]->polar &= ~bitmask; - gpio_bankb[bank]->both &= ~bitmask; - gpio_bankb[bank]->edge &= ~bitmask; - AWA_DUMMY_READ(edge); - local_irq_restore(flags); -} -#else -# define default_gpio(...) do { } while (0) -#endif - static int __init bfin_gpio_init(void) { - printk(KERN_INFO "Blackfin GPIO Controller\n"); return 0; - } arch_initcall(bfin_gpio_init); @@ -821,10 +792,10 @@ int peripheral_request(unsigned short per, const char *label) local_irq_save(flags); if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + dump_stack(); printk(KERN_ERR "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __FUNCTION__, ident, get_label(ident)); - dump_stack(); + __func__, ident, get_label(ident)); local_irq_restore(flags); return -EBUSY; } @@ -833,31 +804,31 @@ int peripheral_request(unsigned short per, const char *label) u16 funct = get_portmux(ident); - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ - if (cmp_label(ident, label) == 0) - goto anyway; + if (cmp_label(ident, label) == 0) + goto anyway; + dump_stack(); printk(KERN_ERR "%s: Peripheral %d function %d is already reserved by %s !\n", - __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); - dump_stack(); + __func__, ident, P_FUNCT2MUX(per), get_label(ident)); local_irq_restore(flags); return -EBUSY; } } -anyway: + anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); portmux_setup(ident, P_FUNCT2MUX(per)); @@ -890,47 +861,47 @@ int peripheral_request(unsigned short per, const char *label) if (!check_gpio(ident)) { - if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { - printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __FUNCTION__, ident, get_label(ident)); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } + if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + dump_stack(); + printk(KERN_ERR + "%s: Peripheral %d is already reserved as GPIO by %s !\n", + __func__, ident, get_label(ident)); + local_irq_restore(flags); + return -EBUSY; + } } if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ - if (!(per & P_MAYSHARE)) { + if (!(per & P_MAYSHARE)) { - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ - if (cmp_label(ident, label) == 0) - goto anyway; + if (cmp_label(ident, label) == 0) + goto anyway; + dump_stack(); printk(KERN_ERR "%s: Peripheral %d function %d is already" " reserved by %s !\n", - __FUNCTION__, ident, P_FUNCT2MUX(per), + __func__, ident, P_FUNCT2MUX(per), get_label(ident)); - dump_stack(); local_irq_restore(flags); return -EBUSY; } } -anyway: + anyway: portmux_setup(per, P_FUNCT2MUX(per)); port_setup(ident, PERIPHERAL_USAGE); @@ -944,7 +915,7 @@ anyway: EXPORT_SYMBOL(peripheral_request); #endif -int peripheral_request_list(unsigned short per[], const char *label) +int peripheral_request_list(const unsigned short per[], const char *label) { u16 cnt; int ret; @@ -954,10 +925,10 @@ int peripheral_request_list(unsigned short per[], const char *label) ret = peripheral_request(per[cnt], label); if (ret < 0) { - for ( ; cnt > 0; cnt--) { + for ( ; cnt > 0; cnt--) peripheral_free(per[cnt - 1]); - } - return ret; + + return ret; } } @@ -981,15 +952,13 @@ void peripheral_free(unsigned short per) local_irq_save(flags); - if (unlikely(!(reserved_peri_map[gpio_bank(ident)] - & gpio_bit(ident)))) { + if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { local_irq_restore(flags); return; } - if (!(per & P_MAYSHARE)) { + if (!(per & P_MAYSHARE)) port_setup(ident, GPIO_USAGE); - } reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); @@ -999,14 +968,11 @@ void peripheral_free(unsigned short per) } EXPORT_SYMBOL(peripheral_free); -void peripheral_free_list(unsigned short per[]) +void peripheral_free_list(const unsigned short per[]) { u16 cnt; - - for (cnt = 0; per[cnt] != 0; cnt++) { + for (cnt = 0; per[cnt] != 0; cnt++) peripheral_free(per[cnt]); - } - } EXPORT_SYMBOL(peripheral_free_list); @@ -1046,17 +1012,17 @@ int gpio_request(unsigned gpio, const char *label) } if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", gpio, get_label(gpio)); - dump_stack(); local_irq_restore(flags); return -EBUSY; } if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", gpio, get_label(gpio)); - dump_stack(); local_irq_restore(flags); return -EBUSY; } @@ -1082,14 +1048,12 @@ void gpio_free(unsigned gpio) local_irq_save(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - gpio_error(gpio); dump_stack(); + gpio_error(gpio); local_irq_restore(flags); return; } - default_gpio(gpio); - reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); set_label(gpio, "free"); @@ -1152,6 +1116,18 @@ int gpio_get_value(unsigned gpio) } EXPORT_SYMBOL(gpio_get_value); +void bfin_gpio_irq_prepare(unsigned gpio) +{ + unsigned long flags; + + port_setup(gpio, GPIO_USAGE); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + local_irq_restore(flags); +} + #else int gpio_direction_input(unsigned gpio) @@ -1218,6 +1194,11 @@ void bfin_gpio_reset_spi0_ssel1(void) udelay(1); } +void bfin_gpio_irq_prepare(unsigned gpio) +{ + port_setup(gpio, GPIO_USAGE); +} + #endif /*BF548_FAMILY */ #if defined(CONFIG_PROC_FS) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c index bd072299f7f2..822beefa3a4b 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c @@ -39,14 +39,6 @@ #include <asm/cplbinit.h> #include <asm/blackfin.h> -#define CPLB_I 1 -#define CPLB_D 2 - -#define SYNC_SYS SSYNC() -#define SYNC_CORE CSYNC() - -#define CPLB_BIT_PAGESIZE 0x30000 - static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index dc6e8a7a8bda..48060105346a 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -43,13 +43,15 @@ void __init generate_cpl_tables(void) unsigned long d_data, i_data; unsigned long d_cache = 0, i_cache = 0; + printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n"); + #ifdef CONFIG_BFIN_ICACHE i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #endif #ifdef CONFIG_BFIN_DCACHE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BLKFIN_WT +#ifdef CONFIG_BFIN_WT d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index c426a22f9907..99f2831e2964 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -24,8 +24,6 @@ #include <asm/cplbinit.h> #include <asm/mmu_context.h> -#ifdef CONFIG_BFIN_ICACHE - #define FAULT_RW (1 << 16) #define FAULT_USERSUPV (1 << 17) @@ -143,30 +141,48 @@ static noinline int dcplb_miss(void) unsigned long d_data; nr_dcplb_miss++; - if (addr >= _ramend) - return CPLB_PROT_VIOL; d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE - d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; -#ifdef CONFIG_BLKFIN_WT - d_data |= CPLB_L1_AOW | CPLB_WT; -#endif + if (addr < _ramend - DMA_UNCACHED_REGION || + (reserved_mem_dcache_on && addr >= _ramend && + addr < physical_mem_end)) { + d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#ifdef CONFIG_BFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; #endif - mask = current_rwx_mask; - if (mask) { - int page = addr >> PAGE_SHIFT; - int offs = page >> 5; - int bit = 1 << (page & 31); - - if (mask[offs] & bit) - d_data |= CPLB_USER_RD; - - mask += page_mask_nelts; - if (mask[offs] & bit) - d_data |= CPLB_USER_WR; } +#endif + if (addr >= physical_mem_end) { + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE + && (status & FAULT_USERSUPV)) { + addr &= ~0x3fffff; + d_data &= ~PAGE_SIZE_4KB; + d_data |= PAGE_SIZE_4MB; + } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH + && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) { + addr &= ~(1 * 1024 * 1024 - 1); + d_data &= ~PAGE_SIZE_4KB; + d_data |= PAGE_SIZE_1MB; + } else + return CPLB_PROT_VIOL; + } else if (addr >= _ramend) { + d_data |= CPLB_USER_RD | CPLB_USER_WR; + } else { + mask = current_rwx_mask; + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + if (mask[offs] & bit) + d_data |= CPLB_USER_RD; + mask += page_mask_nelts; + if (mask[offs] & bit) + d_data |= CPLB_USER_WR; + } + } idx = evict_one_dcplb(); addr &= PAGE_MASK; @@ -189,12 +205,14 @@ static noinline int icplb_miss(void) unsigned long i_data; nr_icplb_miss++; - if (status & FAULT_USERSUPV) - nr_icplb_supv_miss++; - if (addr >= _ramend) + /* If inside the uncached DMA region, fault. */ + if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend) return CPLB_PROT_VIOL; + if (status & FAULT_USERSUPV) + nr_icplb_supv_miss++; + /* * First, try to find a CPLB that matches this address. If we * find one, then the fact that we're in the miss handler means @@ -211,30 +229,48 @@ static noinline int icplb_miss(void) } i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_ICACHE - i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; -#endif +#ifdef CONFIG_BFIN_ICACHE /* - * Two cases to distinguish - a supervisor access must necessarily - * be for a module page; we grant it unconditionally (could do better - * here in the future). Otherwise, check the x bitmap of the current - * process. + * Normal RAM, and possibly the reserved memory area, are + * cacheable. */ - if (!(status & FAULT_USERSUPV)) { - unsigned long *mask = current_rwx_mask; - - if (mask) { - int page = addr >> PAGE_SHIFT; - int offs = page >> 5; - int bit = 1 << (page & 31); + if (addr < _ramend || + (addr < physical_mem_end && reserved_mem_icache_on)) + i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif - mask += 2 * page_mask_nelts; - if (mask[offs] & bit) - i_data |= CPLB_USER_RD; + if (addr >= physical_mem_end) { + if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH + && (status & FAULT_USERSUPV)) { + addr &= ~(1 * 1024 * 1024 - 1); + i_data &= ~PAGE_SIZE_4KB; + i_data |= PAGE_SIZE_1MB; + } else + return CPLB_PROT_VIOL; + } else if (addr >= _ramend) { + i_data |= CPLB_USER_RD; + } else { + /* + * Two cases to distinguish - a supervisor access must + * necessarily be for a module page; we grant it + * unconditionally (could do better here in the future). + * Otherwise, check the x bitmap of the current process. + */ + if (!(status & FAULT_USERSUPV)) { + unsigned long *mask = current_rwx_mask; + + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + mask += 2 * page_mask_nelts; + if (mask[offs] & bit) + i_data |= CPLB_USER_RD; + } } } - idx = evict_one_icplb(); addr &= PAGE_MASK; icplb_tbl[idx].addr = addr; @@ -250,7 +286,6 @@ static noinline int icplb_miss(void) static noinline int dcplb_protection_fault(void) { - unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); nr_dcplb_prot++; @@ -280,8 +315,7 @@ int cplb_hdr(int seqstat, struct pt_regs *regs) case 0x26: return dcplb_miss(); default: - return 1; - panic_cplb_error(seqstat, regs); + return 1; } } @@ -299,7 +333,7 @@ void flush_switched_cplbs(void) enable_icplb(); disable_dcplb(); - for (i = first_mask_dcplb; i < MAX_CPLBS; i++) { + for (i = first_switched_dcplb; i < MAX_CPLBS; i++) { dcplb_tbl[i].data = 0; bfin_write32(DCPLB_DATA0 + i * 4, 0); } @@ -319,7 +353,7 @@ void set_mask_dcplbs(unsigned long *masks) d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE d_data |= CPLB_L1_CHBL; -#ifdef CONFIG_BLKFIN_WT +#ifdef CONFIG_BFIN_WT d_data |= CPLB_L1_AOW | CPLB_WT; #endif #endif @@ -334,5 +368,3 @@ void set_mask_dcplbs(unsigned long *masks) } enable_dcplb(); } - -#endif diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c index a4f0b428a34d..1e74f0b97996 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c @@ -33,9 +33,7 @@ #include <linux/proc_fs.h> #include <linux/uaccess.h> -#include <asm/current.h> -#include <asm/system.h> -#include <asm/cplb.h> +#include <asm/cplbinit.h> #include <asm/blackfin.h> #define CPLB_I 1 @@ -174,16 +172,6 @@ static int cplbinfo_read_proc(char *page, char **start, off_t off, return len; } -static int cplbinfo_write_proc(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - printk(KERN_INFO "Reset the CPLB swap in/out counts.\n"); - memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long)); - memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long)); - - return count; -} - static int __init cplbinfo_init(void) { struct proc_dir_entry *entry; @@ -193,7 +181,6 @@ static int __init cplbinfo_init(void) return -ENOMEM; entry->read_proc = cplbinfo_read_proc; - entry->write_proc = cplbinfo_write_proc; entry->data = NULL; return 0; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 6320bc45fbba..917325bfbd84 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -26,6 +26,35 @@ #include <asm/cplb.h> #include <asm/cplbinit.h> +#ifdef CONFIG_MAX_MEM_SIZE +# define CPLB_MEM CONFIG_MAX_MEM_SIZE +#else +# define CPLB_MEM CONFIG_MEM_SIZE +#endif + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* possibly 1 for L2 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ +#define MAX_SWITCH_D_CPLBS (((CPLB_MEM / 4) + 16 + 1 + 1 + 1 \ + + ASYNC_MEMORY_CPLB_COVERAGE) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* possibly 1 for L2 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ +#define MAX_SWITCH_I_CPLBS (((CPLB_MEM / 4) + 12 + 1 + 1 + 1) * 2) + + u_long icplb_table[MAX_CPLBS + 1]; u_long dcplb_table[MAX_CPLBS + 1]; @@ -295,6 +324,8 @@ void __init generate_cpl_tables(void) struct cplb_tab *t_d = NULL; struct s_cplb cplb; + printk(KERN_INFO "NOMPU: setting up cplb tables for global access\n"); + cplb.init_i.size = MAX_CPLBS; cplb.init_d.size = MAX_CPLBS; cplb.switch_i.size = MAX_SWITCH_I_CPLBS; diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index d6b61d56b656..2f62a9f4058a 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -59,7 +59,7 @@ void dma_alloc_init(unsigned long start, unsigned long end) memset((void *)dma_base, 0, DMA_UNCACHED_REGION); dma_initialized = 1; - printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __FUNCTION__, + printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __func__, dma_page, dma_pages, dma_base); } @@ -100,7 +100,7 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) int i; if ((page + pages) > dma_pages) { - printk(KERN_ERR "%s: freeing outside range.\n", __FUNCTION__); + printk(KERN_ERR "%s: freeing outside range.\n", __func__); BUG(); } diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 1904d8b53328..e698554895a7 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -52,12 +52,14 @@ static volatile GPTIMER_timer_regs *const timer_regs[MAX_BLACKFIN_GPTIMERS] = (GPTIMER_timer_regs *)TIMER5_CONFIG, (GPTIMER_timer_regs *)TIMER6_CONFIG, (GPTIMER_timer_regs *)TIMER7_CONFIG, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) (GPTIMER_timer_regs *)TIMER8_CONFIG, (GPTIMER_timer_regs *)TIMER9_CONFIG, (GPTIMER_timer_regs *)TIMER10_CONFIG, +# if (MAX_BLACKFIN_GPTIMERS > 11) (GPTIMER_timer_regs *)TIMER11_CONFIG, +# endif +# endif #endif }; @@ -80,12 +82,14 @@ static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] = TIMER_STATUS_TRUN5, TIMER_STATUS_TRUN6, TIMER_STATUS_TRUN7, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) TIMER_STATUS_TRUN8, TIMER_STATUS_TRUN9, TIMER_STATUS_TRUN10, +# if (MAX_BLACKFIN_GPTIMERS > 11) TIMER_STATUS_TRUN11, +# endif +# endif #endif }; @@ -100,12 +104,14 @@ static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] = TIMER_STATUS_TOVF5, TIMER_STATUS_TOVF6, TIMER_STATUS_TOVF7, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) TIMER_STATUS_TOVF8, TIMER_STATUS_TOVF9, TIMER_STATUS_TOVF10, +# if (MAX_BLACKFIN_GPTIMERS > 11) TIMER_STATUS_TOVF11, +# endif +# endif #endif }; @@ -120,12 +126,14 @@ static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] = TIMER_STATUS_TIMIL5, TIMER_STATUS_TIMIL6, TIMER_STATUS_TIMIL7, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) TIMER_STATUS_TIMIL8, TIMER_STATUS_TIMIL9, TIMER_STATUS_TIMIL10, +# if (MAX_BLACKFIN_GPTIMERS > 11) TIMER_STATUS_TIMIL11, +# endif +# endif #endif }; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 6b8459c66163..be9fdd00d7cb 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -32,6 +32,8 @@ #include <linux/unistd.h> #include <linux/user.h> #include <linux/uaccess.h> +#include <linux/sched.h> +#include <linux/tick.h> #include <linux/fs.h> #include <linux/err.h> @@ -69,33 +71,44 @@ EXPORT_SYMBOL(pm_power_off); * The idle loop on BFIN */ #ifdef CONFIG_IDLE_L1 -void default_idle(void)__attribute__((l1_text)); +static void default_idle(void)__attribute__((l1_text)); void cpu_idle(void)__attribute__((l1_text)); #endif -void default_idle(void) +/* + * This is our default idle handler. We need to disable + * interrupts here to ensure we don't miss a wakeup call. + */ +static void default_idle(void) { - while (!need_resched()) { - local_irq_disable(); - if (likely(!need_resched())) - idle_with_irq_disabled(); - local_irq_enable(); - } -} + local_irq_disable(); + if (!need_resched()) + idle_with_irq_disabled(); -void (*idle)(void) = default_idle; + local_irq_enable(); +} /* - * The idle thread. There's no useful work to be - * done, so just try to conserve power and have a - * low exit latency (ie sit in a loop waiting for - * somebody to say that they'd like to reschedule) + * The idle thread. We try to conserve power, while trying to keep + * overall latency low. The architecture specific idle is passed + * a value to indicate the level of "idleness" of the system. */ void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - idle(); + void (*idle)(void) = pm_idle; + +#ifdef CONFIG_HOTPLUG_CPU + if (cpu_is_offline(smp_processor_id())) + cpu_die(); +#endif + if (!idle) + idle = default_idle; + tick_nohz_stop_sched_tick(); + while (!need_resched()) + idle(); + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); @@ -189,7 +202,7 @@ copy_thread(int nr, unsigned long clone_flags, * sys_execve() executes a new program. */ -asmlinkage int sys_execve(char *name, char **argv, char **envp) +asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp) { int error; char *filename; @@ -232,23 +245,25 @@ unsigned long get_wchan(struct task_struct *p) void finish_atomic_sections (struct pt_regs *regs) { + int __user *up0 = (int __user *)®s->p0; + if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END) return; switch (regs->pc) { case ATOMIC_XCHG32 + 2: - put_user(regs->r1, (int *)regs->p0); + put_user(regs->r1, up0); regs->pc += 2; break; case ATOMIC_CAS32 + 2: case ATOMIC_CAS32 + 4: if (regs->r0 == regs->r1) - put_user(regs->r2, (int *)regs->p0); + put_user(regs->r2, up0); regs->pc = ATOMIC_CAS32 + 8; break; case ATOMIC_CAS32 + 6: - put_user(regs->r2, (int *)regs->p0); + put_user(regs->r2, up0); regs->pc += 2; break; @@ -256,7 +271,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 + regs->r0; /* fall through */ case ATOMIC_ADD32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_ADD32 + 6; break; @@ -264,7 +279,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 - regs->r0; /* fall through */ case ATOMIC_SUB32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_SUB32 + 6; break; @@ -272,7 +287,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 | regs->r0; /* fall through */ case ATOMIC_IOR32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_IOR32 + 6; break; @@ -280,7 +295,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 & regs->r0; /* fall through */ case ATOMIC_AND32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_AND32 + 6; break; @@ -288,7 +303,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 ^ regs->r0; /* fall through */ case ATOMIC_XOR32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_XOR32 + 6; break; } @@ -309,6 +324,12 @@ int _access_ok(unsigned long addr, unsigned long size) return 1; if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end) return 1; + +#ifdef CONFIG_ROMFS_MTD_FS + /* For XIP, allow user space to use pointers within the ROMFS. */ + if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end) + return 1; +#endif #else if (addr >= memory_start && (addr + size) <= physical_mem_end) return 1; diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 85caf9b711a1..b4f062c172c6 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -193,6 +193,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; int add = 0; + unsigned long __user *datap = (unsigned long __user *)data; switch (request) { /* when I and D space are separate, these will need to be fixed. */ @@ -229,7 +230,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp); if (copied != sizeof(tmp)) break; - ret = put_user(tmp, (unsigned long *)data); + ret = put_user(tmp, datap); break; } @@ -263,7 +264,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else { tmp = get_reg(child, addr); } - ret = put_user(tmp, (unsigned long *)data); + ret = put_user(tmp, datap); break; } @@ -389,7 +390,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { /* Get all gp regs from the child. */ - ret = ptrace_getregs(child, (void __user *)data); + ret = ptrace_getregs(child, datap); break; } diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index 483f93dfc1b5..367e2dc09881 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -11,45 +11,56 @@ #include <asm/reboot.h> #include <asm/system.h> -#if defined(BF537_FAMILY) || defined(BF533_FAMILY) || defined(BF527_FAMILY) -#define SYSCR_VAL 0x0 -#elif defined(BF561_FAMILY) -#define SYSCR_VAL 0x20 -#elif defined(BF548_FAMILY) -#define SYSCR_VAL 0x10 -#endif - -/* - * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15) - */ -#define SWRST_DELAY (5 * 15) - -/* A system soft reset makes external memory unusable - * so force this function into L1. +/* A system soft reset makes external memory unusable so force + * this function into L1. We use the compiler ssync here rather + * than SSYNC() because it's safe (no interrupts and such) and + * we save some L1. We do not need to force sanity in the SYSCR + * register as the BMODE selection bit is cleared by the soft + * reset while the Core B bit (on dual core parts) is cleared by + * the core reset. */ __attribute__((l1_text)) void bfin_reset(void) { - /* force BMODE and disable Core B (as needed) */ - bfin_write_SYSCR(SYSCR_VAL); - - /* we use asm ssync here because it's save and we save some L1 */ - asm("ssync;"); + /* Wait for completion of "system" events such as cache line + * line fills so that we avoid infinite stalls later on as + * much as possible. This code is in L1, so it won't trigger + * any such event after this point in time. + */ + __builtin_bfin_ssync(); while (1) { - /* initiate system soft reset with magic 0x7 */ + /* Initiate System software reset. */ bfin_write_SWRST(0x7); - /* Wait for System reset to actually reset, needs to be 5 SCLKs, */ - /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15 */ - - asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n" - : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0"); + /* Due to the way reset is handled in the hardware, we need + * to delay for 7 SCLKS. The only reliable way to do this is + * to calculate the CCLK/SCLK ratio and multiply 7. For now, + * we'll assume worse case which is a 1:15 ratio. + */ + asm( + "LSETUP (1f, 1f) LC0 = %0\n" + "1: nop;" + : + : "a" (15 * 7) + : "LC0", "LB0", "LT0" + ); - /* clear system soft reset */ + /* Clear System software reset */ bfin_write_SWRST(0); - asm("ssync;"); - /* issue core reset */ + + /* Wait for the SWRST write to complete. Cannot rely on SSYNC + * though as the System state is all reset now. + */ + asm( + "LSETUP (1f, 1f) LC1 = %0\n" + "1: nop;" + : + : "a" (15 * 1) + : "LC1", "LB1", "LT1" + ); + + /* Issue core reset */ asm("raise 1"); } } diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 2255c289a714..8efea004aecb 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -35,6 +35,7 @@ u16 _bfin_swrst; EXPORT_SYMBOL(_bfin_swrst); unsigned long memory_start, memory_end, physical_mem_end; +unsigned long _rambase, _ramstart, _ramend; unsigned long reserved_mem_dcache_on; unsigned long reserved_mem_icache_on; EXPORT_SYMBOL(memory_start); @@ -106,7 +107,7 @@ void __init bf53x_relocate_l1_mem(void) l1_code_length = _etext_l1 - _stext_l1; if (l1_code_length > L1_CODE_LENGTH) - l1_code_length = L1_CODE_LENGTH; + panic("L1 Instruction SRAM Overflow\n"); /* cannot complain as printk is not available as yet. * But we can continue booting and complain later! */ @@ -116,19 +117,18 @@ void __init bf53x_relocate_l1_mem(void) l1_data_a_length = _ebss_l1 - _sdata_l1; if (l1_data_a_length > L1_DATA_A_LENGTH) - l1_data_a_length = L1_DATA_A_LENGTH; + panic("L1 Data SRAM Bank A Overflow\n"); /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); l1_data_b_length = _ebss_b_l1 - _sdata_b_l1; if (l1_data_b_length > L1_DATA_B_LENGTH) - l1_data_b_length = L1_DATA_B_LENGTH; + panic("L1 Data SRAM Bank B Overflow\n"); /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); - } /* add_memory_region to memmap */ @@ -547,11 +547,38 @@ static __init void memory_setup(void) ); } +/* + * Find the lowest, highest page frame number we have available + */ +void __init find_min_max_pfn(void) +{ + int i; + + max_pfn = 0; + min_low_pfn = memory_end; + + for (i = 0; i < bfin_memmap.nr_map; i++) { + unsigned long start, end; + /* RAM? */ + if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM) + continue; + start = PFN_UP(bfin_memmap.map[i].addr); + end = PFN_DOWN(bfin_memmap.map[i].addr + + bfin_memmap.map[i].size); + if (start >= end) + continue; + if (end > max_pfn) + max_pfn = end; + if (start < min_low_pfn) + min_low_pfn = start; + } +} + static __init void setup_bootmem_allocator(void) { int bootmap_size; int i; - unsigned long min_pfn, max_pfn; + unsigned long start_pfn, end_pfn; unsigned long curr_pfn, last_pfn, size; /* mark memory between memory_start and memory_end usable */ @@ -561,8 +588,19 @@ static __init void setup_bootmem_allocator(void) sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map); print_memory_map("boot memmap"); - min_pfn = PAGE_OFFSET >> PAGE_SHIFT; - max_pfn = memory_end >> PAGE_SHIFT; + /* intialize globals in linux/bootmem.h */ + find_min_max_pfn(); + /* pfn of the last usable page frame */ + if (max_pfn > memory_end >> PAGE_SHIFT) + max_pfn = memory_end >> PAGE_SHIFT; + /* pfn of last page frame directly mapped by kernel */ + max_low_pfn = max_pfn; + /* pfn of the first usable page frame after kernel image*/ + if (min_low_pfn < memory_start >> PAGE_SHIFT) + min_low_pfn = memory_start >> PAGE_SHIFT; + + start_pfn = PAGE_OFFSET >> PAGE_SHIFT; + end_pfn = memory_end >> PAGE_SHIFT; /* * give all the memory to the bootmap allocator, tell it to put the @@ -570,7 +608,7 @@ static __init void setup_bootmem_allocator(void) */ bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */ - min_pfn, max_pfn); + start_pfn, end_pfn); /* register the memmap regions with the bootmem allocator */ for (i = 0; i < bfin_memmap.nr_map; i++) { @@ -583,7 +621,7 @@ static __init void setup_bootmem_allocator(void) * We are rounding up the start address of usable memory: */ curr_pfn = PFN_UP(bfin_memmap.map[i].addr); - if (curr_pfn >= max_pfn) + if (curr_pfn >= end_pfn) continue; /* * ... and at the end of the usable range downwards: @@ -591,8 +629,8 @@ static __init void setup_bootmem_allocator(void) last_pfn = PFN_DOWN(bfin_memmap.map[i].addr + bfin_memmap.map[i].size); - if (last_pfn > max_pfn) - last_pfn = max_pfn; + if (last_pfn > end_pfn) + last_pfn = end_pfn; /* * .. finally, did all the rounding and playing @@ -611,9 +649,59 @@ static __init void setup_bootmem_allocator(void) BOOTMEM_DEFAULT); } +#define EBSZ_TO_MEG(ebsz) \ +({ \ + int meg = 0; \ + switch (ebsz & 0xf) { \ + case 0x1: meg = 16; break; \ + case 0x3: meg = 32; break; \ + case 0x5: meg = 64; break; \ + case 0x7: meg = 128; break; \ + case 0x9: meg = 256; break; \ + case 0xb: meg = 512; break; \ + } \ + meg; \ +}) +static inline int __init get_mem_size(void) +{ +#ifdef CONFIG_MEM_SIZE + return CONFIG_MEM_SIZE; +#else +# if defined(EBIU_SDBCTL) +# if defined(BF561_FAMILY) + int ret = 0; + u32 sdbctl = bfin_read_EBIU_SDBCTL(); + ret += EBSZ_TO_MEG(sdbctl >> 0); + ret += EBSZ_TO_MEG(sdbctl >> 8); + ret += EBSZ_TO_MEG(sdbctl >> 16); + ret += EBSZ_TO_MEG(sdbctl >> 24); + return ret; +# else + return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL()); +# endif +# elif defined(EBIU_DDRCTL1) + u32 ddrctl = bfin_read_EBIU_DDRCTL1(); + int ret = 0; + switch (ddrctl & 0xc0000) { + case DEVSZ_64: ret = 64 / 8; + case DEVSZ_128: ret = 128 / 8; + case DEVSZ_256: ret = 256 / 8; + case DEVSZ_512: ret = 512 / 8; + } + switch (ddrctl & 0x30000) { + case DEVWD_4: ret *= 2; + case DEVWD_8: ret *= 2; + case DEVWD_16: break; + } + return ret; +# endif +#endif + BUG(); +} + void __init setup_arch(char **cmdline_p) { - unsigned long l1_length, sclk, cclk; + unsigned long sclk, cclk; #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -631,7 +719,7 @@ void __init setup_arch(char **cmdline_p) /* setup memory defaults from the user config */ physical_mem_end = 0; - _ramend = CONFIG_MEM_SIZE * 1024 * 1024; + _ramend = get_mem_size() * 1024 * 1024; memset(&bfin_memmap, 0, sizeof(bfin_memmap)); @@ -712,15 +800,6 @@ void __init setup_arch(char **cmdline_p) paging_init(); - /* check the size of the l1 area */ - l1_length = _etext_l1 - _stext_l1; - if (l1_length > L1_CODE_LENGTH) - panic("L1 code memory overflow\n"); - - l1_length = _ebss_l1 - _sdata_l1; - if (l1_length > L1_DATA_A_LENGTH) - panic("L1 data memory overflow\n"); - /* Copy atomic sequences to their fixed location, and sanity check that these locations are the ones that we advertise to userspace. */ memcpy((void *)FIXED_CODE_START, &fixed_code_start, @@ -859,12 +938,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n" "cpu family\t: 0x%x\n" - "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK)\n" + "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n" "stepping\t: %d\n", 0, vendor, (bfin_read_CHIPID() & CHIPID_FAMILY), cpu, cclk/1000000, sclk/1000000, +#ifdef CONFIG_MPU + "mpu on", +#else + "mpu off", +#endif revid); seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", @@ -973,7 +1057,6 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "No Ways are locked\n"); } #endif - seq_printf(m, "board name\t: %s\n", bfin_board_name); seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index 5564c9588aa8..d1fa24401dc6 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -38,6 +38,7 @@ #include <asm/cacheflush.h> #include <asm/ucontext.h> +#include <asm/fixed_code.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -50,18 +51,20 @@ struct rt_sigframe { int sig; struct siginfo *pinfo; void *puc; + /* This is no longer needed by the kernel, but unfortunately userspace + * code expects it to be there. */ char retcode[8]; struct siginfo info; struct ucontext uc; }; -asmlinkage int sys_sigaltstack(const stack_t * uss, stack_t * uoss) +asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) { return do_sigaltstack(uss, uoss, rdusp()); } static inline int -rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *pr0) +rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *pr0) { unsigned long usp = 0; int err = 0; @@ -159,11 +162,6 @@ static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *reg return err; } -static inline void push_cache(unsigned long vaddr, unsigned int len) -{ - flush_icache_range(vaddr, vaddr + len); -} - static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) { @@ -209,19 +207,9 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs); err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - /* Set up to return from userspace. */ - err |= __put_user(0x28, &(frame->retcode[0])); - err |= __put_user(0xe1, &(frame->retcode[1])); - err |= __put_user(0xad, &(frame->retcode[2])); - err |= __put_user(0x00, &(frame->retcode[3])); - err |= __put_user(0xa0, &(frame->retcode[4])); - err |= __put_user(0x00, &(frame->retcode[5])); - if (err) goto give_sigsegv; - push_cache((unsigned long)&frame->retcode, sizeof(frame->retcode)); - /* Set up registers for signal handler */ wrusp((unsigned long)frame); if (get_personality & FDPIC_FUNCPTRS) { @@ -231,7 +219,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, __get_user(regs->p3, &funcptr->GOT); } else regs->pc = (unsigned long)ka->sa.sa_handler; - regs->rets = (unsigned long)(frame->retcode); + regs->rets = SIGRETURN_STUB; regs->r0 = frame->sig; regs->r1 = (unsigned long)(&frame->info); diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index abcd14817d0e..efb7b25a2633 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -49,7 +49,7 @@ * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. */ -asmlinkage int sys_pipe(unsigned long *fildes) +asmlinkage int sys_pipe(unsigned long __user *fildes) { int fd[2]; int error; diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c new file mode 100644 index 000000000000..4482c47c09e5 --- /dev/null +++ b/arch/blackfin/kernel/time-ts.c @@ -0,0 +1,219 @@ +/* + * linux/arch/kernel/time-ts.c + * + * Based on arm clockevents implementation and old bfin time tick. + * + * Copyright(C) 2008, GeoTechnologies, Vitja Makarov + * + * This code is licenced under the GPL version 2. For details see + * kernel-base/COPYING. + */ +#include <linux/module.h> +#include <linux/profile.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/irq.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/cpufreq.h> + +#include <asm/blackfin.h> +#include <asm/time.h> + +#ifdef CONFIG_CYCLES_CLOCKSOURCE + +/* Accelerators for sched_clock() + * convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better precision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ + +static unsigned long cyc2ns_scale; +#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ + +static inline void set_cyc2ns_scale(unsigned long cpu_khz) +{ + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz; +} + +static inline unsigned long long cycles_2_ns(cycle_t cyc) +{ + return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; +} + +static cycle_t read_cycles(void) +{ + return get_cycles(); +} + +unsigned long long sched_clock(void) +{ + return cycles_2_ns(read_cycles()); +} + +static struct clocksource clocksource_bfin = { + .name = "bfin_cycles", + .rating = 350, + .read = read_cycles, + .mask = CLOCKSOURCE_MASK(64), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init bfin_clocksource_init(void) +{ + set_cyc2ns_scale(get_cclk() / 1000); + + clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift); + + if (clocksource_register(&clocksource_bfin)) + panic("failed to register clocksource"); + + return 0; +} + +#else +# define bfin_clocksource_init() +#endif + +static int bfin_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + bfin_write_TCOUNT(cycles); + CSYNC(); + return 0; +} + +static void bfin_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: { + unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); + bfin_write_TCNTL(TMPWR); + bfin_write_TSCALE(TIME_SCALE - 1); + CSYNC(); + bfin_write_TPERIOD(tcount); + bfin_write_TCOUNT(tcount); + bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD); + CSYNC(); + break; + } + case CLOCK_EVT_MODE_ONESHOT: + bfin_write_TSCALE(0); + bfin_write_TCOUNT(0); + bfin_write_TCNTL(TMPWR | TMREN); + CSYNC(); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + bfin_write_TCNTL(0); + CSYNC(); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static void __init bfin_timer_init(void) +{ + /* power up the timer, but don't enable it just yet */ + bfin_write_TCNTL(TMPWR); + CSYNC(); + + /* + * the TSCALE prescaler counter. + */ + bfin_write_TSCALE(TIME_SCALE - 1); + bfin_write_TPERIOD(0); + bfin_write_TCOUNT(0); + + /* now enable the timer */ + CSYNC(); +} + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +__attribute__((l1_text)) +#endif +irqreturn_t timer_interrupt(int irq, void *dev_id); + +static struct clock_event_device clockevent_bfin = { + .name = "bfin_core_timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .cpumask = CPU_MASK_CPU0, + .set_next_event = bfin_timer_set_next_event, + .set_mode = bfin_timer_set_mode, +}; + +static struct irqaction bfin_timer_irq = { + .name = "Blackfin Core Timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = timer_interrupt, + .dev_id = &clockevent_bfin, +}; + +irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static int __init bfin_clockevent_init(void) +{ + setup_irq(IRQ_CORETMR, &bfin_timer_irq); + bfin_timer_init(); + + clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift); + clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin); + clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin); + clockevents_register_device(&clockevent_bfin); + + return 0; +} + +void __init time_init(void) +{ + time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */ + +#ifdef CONFIG_RTC_DRV_BFIN + /* [#2663] hack to filter junk RTC values that would cause + * userspace to have to deal with time values greater than + * 2^31 seconds (which uClibc cannot cope with yet) + */ + if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) { + printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n"); + bfin_write_RTC_STAT(0); + } +#endif + + /* Initialize xtime. From now on, xtime is updated with timer interrupts */ + xtime.tv_sec = secs_since_1970; + xtime.tv_nsec = 0; + set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); + + bfin_clocksource_init(); + bfin_clockevent_init(); +} diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 715b3945e4c7..eb2352320454 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -6,9 +6,10 @@ * Created: * Description: This file contains the bfin-specific time handling details. * Most of the stuff is located in the machine specific files. + * FIXME: (This file is subject for removal) * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -35,6 +36,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> +#include <asm/time.h> /* This is an NTP setting */ #define TICK_SIZE (tick_nsec / 1000) @@ -47,21 +49,6 @@ static struct irqaction bfin_timer_irq = { .flags = IRQF_DISABLED }; -/* - * The way that the Blackfin core timer works is: - * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE) - * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT) - * - * If you take the fastest clock (1ns, or 1GHz to make the math work easier) - * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter - * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need - * to use TSCALE, and program it to zero (which is pass CCLK through). - * If you feel like using it, try to keep HZ * TIMESCALE to some - * value that divides easy (like power of 2). - */ - -#define TIME_SCALE 1 - static void time_sched_init(irq_handler_t timer_routine) { diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 56a67ab698c7..5b847070dae5 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -67,6 +67,8 @@ void __init trap_init(void) CSYNC(); } +void *saved_icplb_fault_addr, *saved_dcplb_fault_addr; + int kstack_depth_to_print = 48; static void decode_address(char *buf, unsigned long address) @@ -75,7 +77,7 @@ static void decode_address(char *buf, unsigned long address) struct task_struct *p; struct mm_struct *mm; unsigned long flags, offset; - unsigned int in_exception = bfin_read_IPEND() & 0x10; + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); #ifdef CONFIG_KALLSYMS unsigned long symsize; @@ -117,7 +119,7 @@ static void decode_address(char *buf, unsigned long address) */ write_lock_irqsave(&tasklist_lock, flags); for_each_process(p) { - mm = (in_exception ? p->mm : get_task_mm(p)); + mm = (in_atomic ? p->mm : get_task_mm(p)); if (!mm) continue; @@ -137,23 +139,36 @@ static void decode_address(char *buf, unsigned long address) /* FLAT does not have its text aligned to the start of * the map while FDPIC ELF does ... */ - if (current->mm && - (address > current->mm->start_code) && - (address < current->mm->end_code)) - offset = address - current->mm->start_code; - else - offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); - - sprintf(buf, "<0x%p> [ %s + 0x%lx ]", - (void *)address, name, offset); - if (!in_exception) + + /* before we can check flat/fdpic, we need to + * make sure current is valid + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3)) { + if (current->mm && + (address > current->mm->start_code) && + (address < current->mm->end_code)) + offset = address - current->mm->start_code; + else + offset = (address - vma->vm_start) + + (vma->vm_pgoff << PAGE_SHIFT); + + sprintf(buf, "<0x%p> [ %s + 0x%lx ]", + (void *)address, name, offset); + } else + sprintf(buf, "<0x%p> [ %s vma:0x%lx-0x%lx]", + (void *)address, name, + vma->vm_start, vma->vm_end); + + if (!in_atomic) mmput(mm); + goto done; } vml = vml->next; } - if (!in_exception) + if (!in_atomic) mmput(mm); } @@ -506,7 +521,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_signo = sig; info.si_errno = 0; - info.si_addr = (void *)fp->pc; + info.si_addr = (void __user *)fp->pc; force_sig_info(sig, &info, current); trace_buffer_restore(j); @@ -655,21 +670,31 @@ void dump_bfin_process(struct pt_regs *fp) else if (context & 0x8000) printk(KERN_NOTICE "Kernel process context\n"); - if (current->pid && current->mm) { + /* Because we are crashing, and pointers could be bad, we check things + * pretty closely before we use them + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3) && current->pid) { printk(KERN_NOTICE "CURRENT PROCESS:\n"); - printk(KERN_NOTICE "COMM=%s PID=%d\n", - current->comm, current->pid); - - printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", - (void *)current->mm->start_code, - (void *)current->mm->end_code, - (void *)current->mm->start_data, - (void *)current->mm->end_data, - (void *)current->mm->end_data, - (void *)current->mm->brk, - (void *)current->mm->start_stack); + if (current->comm >= (char *)FIXED_CODE_START) + printk(KERN_NOTICE "COMM=%s PID=%d\n", + current->comm, current->pid); + else + printk(KERN_NOTICE "COMM= invalid\n"); + + if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) + printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" + KERN_NOTICE "\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + else + printk(KERN_NOTICE "invalid mm\n"); } else printk(KERN_NOTICE "\n" KERN_NOTICE "No Valid process in current context\n"); @@ -680,10 +705,7 @@ void dump_bfin_mem(struct pt_regs *fp) unsigned short *addr, *erraddr, val = 0, err = 0; char sti = 0, buf[6]; - if (unlikely((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)) - erraddr = (void *)fp->pc; - else - erraddr = (void *)fp->retx; + erraddr = (void *)fp->pc; printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); @@ -807,9 +829,9 @@ unlock: if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { - decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); + decode_address(buf, saved_dcplb_fault_addr); printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); + decode_address(buf, saved_icplb_fault_addr); printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } @@ -917,8 +939,8 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) oops_in_progress = 1; - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); + printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr); + printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr); dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index cb01a9de2680..3ecc64cab3be 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -56,6 +56,10 @@ SECTIONS *(.text.*) *(.fixup) +#if !L1_CODE_LENGTH + *(.l1.text) +#endif + . = ALIGN(16); ___start___ex_table = .; *(__ex_table) @@ -73,6 +77,12 @@ SECTIONS ___bss_start = .; *(.bss .bss.*) *(COMMON) +#if !L1_DATA_A_LENGTH + *(.l1.bss) +#endif +#if !L1_DATA_B_LENGTH + *(.l1.bss.B) +#endif ___bss_stop = .; } @@ -83,6 +93,15 @@ SECTIONS . = ALIGN(32); *(.data.cacheline_aligned) +#if !L1_DATA_A_LENGTH + . = ALIGN(32); + *(.data_l1.cacheline_aligned) + *(.l1.data) +#endif +#if !L1_DATA_B_LENGTH + *(.l1.data.B) +#endif + DATA_DATA *(.data.*) CONSTRUCTORS @@ -147,64 +166,43 @@ SECTIONS __l1_lma_start = .; -#if L1_CODE_LENGTH -# define LDS_L1_CODE *(.l1.text) -#else -# define LDS_L1_CODE -#endif .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs)) { . = ALIGN(4); __stext_l1 = .; - LDS_L1_CODE + *(.l1.text) . = ALIGN(4); __etext_l1 = .; } -#if L1_DATA_A_LENGTH -# define LDS_L1_A_DATA *(.l1.data) -# define LDS_L1_A_BSS *(.l1.bss) -# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned) -#else -# define LDS_L1_A_DATA -# define LDS_L1_A_BSS -# define LDS_L1_A_CACHE -#endif .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) { . = ALIGN(4); __sdata_l1 = .; - LDS_L1_A_DATA + *(.l1.data) __edata_l1 = .; . = ALIGN(4); __sbss_l1 = .; - LDS_L1_A_BSS + *(.l1.bss) . = ALIGN(32); - LDS_L1_A_CACHE + *(.data_l1.cacheline_aligned) . = ALIGN(4); __ebss_l1 = .; } -#if L1_DATA_B_LENGTH -# define LDS_L1_B_DATA *(.l1.data.B) -# define LDS_L1_B_BSS *(.l1.bss.B) -#else -# define LDS_L1_B_DATA -# define LDS_L1_B_BSS -#endif .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) { . = ALIGN(4); __sdata_b_l1 = .; - LDS_L1_B_DATA + *(.l1.data.B) __edata_b_l1 = .; . = ALIGN(4); __sbss_b_l1 = .; - LDS_L1_B_BSS + *(.l1.bss.B) . = ALIGN(4); __ebss_b_l1 = .; @@ -223,8 +221,6 @@ SECTIONS DWARF_DEBUG - NOTES - /DISCARD/ : { EXIT_TEXT diff --git a/arch/blackfin/mach-bf527/Makefile b/arch/blackfin/mach-bf527/Makefile index 9f99f5d0bcd1..4eddb580319c 100644 --- a/arch/blackfin/mach-bf527/Makefile +++ b/arch/blackfin/mach-bf527/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index cf4bc0d83355..583d53811f03 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -94,7 +94,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -416,7 +416,7 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", - .size = 0x00020000, + .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { @@ -707,6 +707,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -874,6 +900,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -896,7 +926,7 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf527/cpu.c b/arch/blackfin/mach-bf527/cpu.c deleted file mode 100644 index 1975402b1dbc..000000000000 --- a/arch/blackfin/mach-bf527/cpu.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * File: arch/blackfin/mach-bf527/cpu.c - * Based on: arch/blackfin/mach-bf537/cpu.c - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf527 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x), VCO(x)/4}, {VCO(x), VCO(x)/2}, {VCO(x), VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf527_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf527_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf527_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target - (policy, bf527_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf527_freq_table[index].frequency; - vco_mhz = bf527_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf527_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug - ("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf527_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf527_freq_table); -} - -static int __init __bf527_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf527_getfreq(0); - cpufreq_frequency_table_get_attr(bf527_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf527_freq_table); -} - -static struct freq_attr *bf527_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf527_driver = { - .verify = bf527_verify_speed, - .target = bf527_target, - .get = bf527_getfreq, - .init = __bf527_cpu_init, - .name = "bf527", - .owner = THIS_MODULE, - .attr = bf527_freq_attr, -}; - -static int __init bf527_cpu_init(void) -{ - return cpufreq_register_driver(&bf527_driver); -} - -static void __exit bf527_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf527_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for bf527 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf527_cpu_init); -module_exit(bf527_cpu_exit); diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c index 522de24cc394..dfd080cda787 100644 --- a/arch/blackfin/mach-bf527/dma.c +++ b/arch/blackfin/mach-bf527/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -47,6 +49,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index cdb00a084965..57bdb3ba2fed 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -439,18 +436,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index 8cce1736360d..aa9f2647ee0c 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 97378b0a9753..7cc4864f6aaf 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -304,6 +304,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) #include <linux/serial_8250.h> @@ -403,6 +422,10 @@ static struct platform_device *h8606_devices[] __initdata = { &serial8250_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) &opencores_kbd_device, #endif @@ -411,7 +434,7 @@ static struct platform_device *h8606_devices[] __initdata = { static int __init H8606_init(void) { printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 751de5110afc..840059241fbe 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -26,6 +26,12 @@ config H8606_HVSISTEMAS help HV Sistemas H8606 board support. +config BFIN532_IP0X + bool "IP04/IP08 IP-PBX" + depends on (BF532) + help + Core support for IP04/IP04 open hardware IP-PBX. + config GENERIC_BF533_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 54f57fb9791e..b7a1a1d79bda 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o +obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 886f260d9359..a03149c72681 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -234,6 +234,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -327,6 +346,10 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -355,7 +378,7 @@ static struct platform_device *cm_bf533_devices[] __initdata = { static int __init cm_bf533_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 241b5a20a36a..08a7943949ae 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -237,6 +237,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT 55 @@ -352,6 +371,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif @@ -369,7 +392,7 @@ static struct platform_device *ezkit_devices[] __initdata = { static int __init ezkit_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index e359a0d6467f..82b1f6a60e3f 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -84,7 +84,7 @@ static struct platform_device *generic_board_devices[] __initdata = { static int __init generic_board_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); } diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c new file mode 100644 index 000000000000..5864892de314 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -0,0 +1,303 @@ +/* + * File: arch/blackfin/mach-bf533/ip0x.c + * Based on: arch/blackfin/mach-bf533/bf1.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Ivan Danov <idanov@gmail.com> + * Modified for IP0X David Rowe + * + * Created: 2007 + * Description: Board info file for the IP04/IP08 boards, which + * are derived from the BlackfinOne V2.0 boards. + * + * Modified: + * COpyright 2007 David Rowe + * Copyright 2006 Intratrade Ltd. + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb/isp1362.h> +#endif +#include <asm/irq.h> +#include <asm/bfin5xx_spi.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "IP04/IP08"; + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + +#include <linux/dm9000.h> + +static struct resource dm9000_resource1[] = { + { + .start = 0x20100000, + .end = 0x20100000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20100000 + 2, + .end = 0x20100000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +static struct resource dm9000_resource2[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20200000 + 2, + .end = 0x20200000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +/* +* for the moment we limit ourselves to 16bit IO until some +* better IO routines can be written and tested +*/ +static struct dm9000_plat_data dm9000_platdata1 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device1 = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000_resource1), + .resource = dm9000_resource1, + .dev = { + .platform_data = &dm9000_platdata1, + } +}; + +static struct dm9000_plat_data dm9000_platdata2 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device2 = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(dm9000_resource2), + .resource = dm9000_resource2, + .dev = { + .platform_data = &dm9000_platdata2, + } +}; + +#endif +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { +/* + * CPOL (Clock Polarity) + * 0 - Active high SCK + * 1 - Active low SCK + * CPHA (Clock Phase) Selects transfer format and operation mode + * 0 - SCLK toggles from middle of the first data bit, slave select + * pins controlled by hardware. + * 1 - SCLK toggles from beginning of first data bit, slave select + * pins controller by user software. + * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work + * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 + * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 + */ + .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ + .enable_dma = 0, /* if 1 - block!!! */ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +/* Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate */ +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc", + .max_speed_hz = 2, + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 1, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20300000 + 2, + .end = 0x20300000 + 3, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF11, + .end = IRQ_PF11, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, /* external OC */ + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + + +static struct platform_device *ip0x_devices[] __initdata = { +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device1, + &dm9000_device2, +#endif +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif +}; + +static int __init ip0x_init(void) +{ + int i; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) { + int j = 1 << bfin_spi_board_info[i].chip_select; + /* set spi cs to 1 */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j); + bfin_write_FIO_FLAG_S(j); + } + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(ip0x_init); diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index b2ac4816ae62..fddce32901a2 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -40,6 +40,7 @@ #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/i2c.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -109,6 +110,7 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -152,6 +154,7 @@ static struct platform_device stamp_flash_device = { .num_resources = ARRAY_SIZE(stamp_flash_resource), .resource = stamp_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -367,6 +370,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -472,6 +494,31 @@ static struct platform_device i2c_gpio_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) + { + I2C_BOARD_INFO("ad7142_joystick", 0x2C), + .type = "ad7142_joystick", + .irq = 39, + }, +#endif +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 39, + }, +#endif +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -497,6 +544,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -515,14 +566,23 @@ static struct platform_device *stamp_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) &stamp_flash_device, +#endif }; static int __init stamp_init(void) { int ret; - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) return ret; diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c deleted file mode 100644 index b7a0e0fbd9af..000000000000 --- a/arch/blackfin/mach-bf533/cpu.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/cpu.c - * Based on: - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf533 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf533_freq_table[] = { - FREQ(1), - FREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - FREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf533_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz, vco_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - return cclk_mhz; -} - -static int bf533_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index, vco_index; - int i; - - struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index)) - return -EINVAL; - cclk_mhz = bf533_freq_table[index].frequency; - vco_mhz = bf533_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf533_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf533_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf533_freq_table); -} - -static int __init __bf533_cpu_init(struct cpufreq_policy *policy) -{ - int result; - - if (policy->cpu != 0) - return -EINVAL; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf533_getfreq(0); - cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table); -} - -static struct freq_attr *bf533_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf533_driver = { - .verify = bf533_verify_speed, - .target = bf533_target, - .get = bf533_getfreq, - .init = __bf533_cpu_init, - .name = "bf533", - .owner = THIS_MODULE, - .attr = bf533_freq_attr, -}; - -static int __init bf533_cpu_init(void) -{ - return cpufreq_register_driver(&bf533_driver); -} - -static void __exit bf533_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf533_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF533 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf533_cpu_init); -module_exit(bf533_cpu_exit); diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 6c909cf4f7bf..28655c1cb7dc 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -43,6 +45,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 1ded945a6fa0..1295deac00a4 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -36,9 +36,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -151,26 +148,26 @@ ENTRY(__start) /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -431,18 +428,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile index 7e7c9c8ac5b2..68e5478e95a9 100644 --- a/arch/blackfin/mach-bf537/Makefile +++ b/arch/blackfin/mach-bf537/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index f7c1f964f13b..d8a23cd9b9ed 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -325,6 +325,54 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -393,6 +441,14 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -425,7 +481,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { static int __init cm_bf537_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index c95395ba7bfa..7d250828dad8 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -90,7 +90,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -554,6 +554,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -674,6 +700,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -690,7 +720,7 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index d71e0be33921..18ddf7a52005 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -8,12 +8,12 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb_sl811.h> +#include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -225,6 +225,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -284,6 +310,10 @@ static struct platform_device *minotaur_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -297,7 +327,7 @@ static struct platform_device *minotaur_devices[] __initdata = { static int __init minotaur_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 509a8a236fd0..51c3bab14a69 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -452,6 +452,31 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -493,11 +518,15 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif }; static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ea83148993da..0cec14b1ef5c 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -41,6 +41,7 @@ #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/i2c.h> #include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -90,7 +91,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -353,6 +354,7 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -395,6 +397,7 @@ static struct platform_device stamp_flash_device = { .num_resources = 1, .resource = &stamp_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -500,6 +503,15 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_MTD_DATAFLASH) \ + || defined(CONFIG_MTD_DATAFLASH_MODULE) +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -514,7 +526,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif - +#if defined(CONFIG_MTD_DATAFLASH) \ + || defined(CONFIG_MTD_DATAFLASH_MODULE) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif #if defined(CONFIG_SPI_ADC_BF533) \ || defined(CONFIG_SPI_ADC_BF533_MODULE) { @@ -676,6 +698,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -698,6 +746,31 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) + { + I2C_BOARD_INFO("ad7142_joystick", 0x2C), + .type = "ad7142_joystick", + .irq = 55, + }, +#endif +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 72, + }, +#endif +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -800,6 +873,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -818,12 +895,21 @@ static struct platform_device *stamp_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &stamp_flash_device, +#endif }; static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, @@ -833,6 +919,7 @@ static int __init stamp_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif + return 0; } diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c deleted file mode 100644 index 0442c4c7f723..000000000000 --- a/arch/blackfin/mach-bf537/cpu.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/cpu.c - * Based on: - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf537 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf537_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf537_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf537_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, bf537_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf537_freq_table[index].frequency; - vco_mhz = bf537_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf537_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf537_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf537_freq_table); -} - -static int __init __bf537_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf537_getfreq(0); - cpufreq_frequency_table_get_attr(bf537_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf537_freq_table); -} - -static struct freq_attr *bf537_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf537_driver = { - .verify = bf537_verify_speed, - .target = bf537_target, - .get = bf537_getfreq, - .init = __bf537_cpu_init, - .name = "bf537", - .owner = THIS_MODULE, - .attr = bf537_freq_attr, -}; - -static int __init bf537_cpu_init(void) -{ - return cpufreq_register_driver(&bf537_driver); -} - -static void __exit bf537_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf537_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF537 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf537_cpu_init); -module_exit(bf537_cpu_exit); diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c index 706cb97b0265..4edb363ff99c 100644 --- a/arch/blackfin/mach-bf537/dma.c +++ b/arch/blackfin/mach-bf537/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -47,6 +49,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 3014fe8dd155..48cd58a410a0 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -180,40 +177,28 @@ ENTRY(__start) SSYNC; #endif -#ifdef CONFIG_BF537_PORT_H - p0.h = hi(PORTH_FER); - p0.l = lo(PORTH_FER); - R0.L = W[P0]; /* Read */ - SSYNC; - R0 = 0x0000; - W[P0] = R0.L; /* Write */ - SSYNC; - W[P0] = R0.L; /* Disable peripheral function of PORTH */ - SSYNC; -#endif - /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -483,18 +468,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile index 7e7c9c8ac5b2..68e5478e95a9 100644 --- a/arch/blackfin/mach-bf548/Makefile +++ b/arch/blackfin/mach-bf548/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf548/boards/Kconfig b/arch/blackfin/mach-bf548/boards/Kconfig index 057129064037..d38e52671853 100644 --- a/arch/blackfin/mach-bf548/boards/Kconfig +++ b/arch/blackfin/mach-bf548/boards/Kconfig @@ -8,5 +8,11 @@ config BFIN548_EZKIT bool "BF548-EZKIT" help BFIN548-EZKIT board support. + +config BFIN548_BLUETECHNIX_CM + bool "Bluetechnix CM-BF548" + depends on (BF548) + help + CM-BF548 support for DEV-Board. endchoice diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile index a444cc739578..eed161dd7845 100644 --- a/arch/blackfin/mach-bf548/boards/Makefile +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o +obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c new file mode 100644 index 000000000000..e3e8479fffb5 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -0,0 +1,664 @@ +/* + * File: arch/blackfin/mach-bf548/boards/cm_bf548.c + * Based on: arch/blackfin/mach-bf537/boards/ezkit.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb/musb.h> +#include <asm/bfin5xx_spi.h> +#include <asm/cplb.h> +#include <asm/dma.h> +#include <asm/gpio.h> +#include <asm/nand.h> +#include <asm/portmux.h> +#include <asm/mach/bf54x_keys.h> +#include <linux/input.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix CM-BF548"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + +#include <asm/mach/bf54x-lq043.h> + +static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { + .width = 480, + .height = 272, + .xres = {480, 480, 480}, + .yres = {272, 272, 272}, + .bpp = {24, 24, 24}, + .disp = GPIO_PE3, +}; + +static struct resource bf54x_lq043_resources[] = { + { + .start = IRQ_EPPI0_ERR, + .end = IRQ_EPPI0_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_lq043_device = { + .name = "bf54x-lq043", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_lq043_resources), + .resource = bf54x_lq043_resources, + .dev = { + .platform_data = &bf54x_lq043_data, + }, +}; +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +static unsigned int bf548_keymap[] = { + KEYVAL(0, 0, KEY_ENTER), + KEYVAL(0, 1, KEY_HELP), + KEYVAL(0, 2, KEY_0), + KEYVAL(0, 3, KEY_BACKSPACE), + KEYVAL(1, 0, KEY_TAB), + KEYVAL(1, 1, KEY_9), + KEYVAL(1, 2, KEY_8), + KEYVAL(1, 3, KEY_7), + KEYVAL(2, 0, KEY_DOWN), + KEYVAL(2, 1, KEY_6), + KEYVAL(2, 2, KEY_5), + KEYVAL(2, 3, KEY_4), + KEYVAL(3, 0, KEY_UP), + KEYVAL(3, 1, KEY_3), + KEYVAL(3, 2, KEY_2), + KEYVAL(3, 3, KEY_1), +}; + +static struct bfin_kpad_platform_data bf54x_kpad_data = { + .rows = 4, + .cols = 4, + .keymap = bf548_keymap, + .keymapsize = ARRAY_SIZE(bf548_keymap), + .repeat = 0, + .debounce_time = 5000, /* ns (5ms) */ + .coldrive_time = 1000, /* ns (1ms) */ + .keyup_test_interval = 50, /* ms (50ms) */ +}; + +static struct resource bf54x_kpad_resources[] = { + { + .start = IRQ_KEY, + .end = IRQ_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_kpad_device = { + .name = "bf54x-keys", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_kpad_resources), + .resource = bf54x_kpad_resources, + .dev = { + .platform_data = &bf54x_kpad_data, + }, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x24000000, + .end = 0x24000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE6, + .end = IRQ_PE6, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +static struct resource bfin_atapi_resources[] = { + { + .start = 0xFFC03800, + .end = 0xFFC0386F, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ATAPI_ERR, + .end = IRQ_ATAPI_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_atapi_device = { + .name = "pata-bf54x", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_atapi_resources), + .resource = bfin_atapi_resources, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = 4 * SIZE_1M, + .size = (256 - 4) * SIZE_1M, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +static struct platform_device bf54x_sdh_device = { + .name = "bfin-sdh", + .id = 0, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (m25p16) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = 0x1c0000, + .offset = 0x40000 + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .cs_change_per_word = 0, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bf54x_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +{ + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PJ11, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, +}, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bf54x_spi_master_info0 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bf54x_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf54x_spi_master_info0, /* Passed to driver */ + }, +}; + +static struct bfin5xx_spi_master bf54x_spi_master_info1 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct platform_device bf54x_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf54x_spi_master_info1, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_REGBASE, + .end = TWI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct platform_device *cm_bf548_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + &bf54x_lq043_device, +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) + &bfin_atapi_device, +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + &bf54x_sdh_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bf54x_spi_master0, + &bf54x_spi_master1, +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) + &bf54x_kpad_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +/* &i2c_bfin_twi0_device, */ +#if !defined(CONFIG_BF542) + &i2c_bfin_twi1_device, +#endif +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif +}; + +static int __init cm_bf548_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bf54x_spi_board_info, + ARRAY_SIZE(bf54x_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(cm_bf548_init); diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 40846aa034c4..231dfbd3bc1f 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -36,6 +36,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> +#include <linux/i2c.h> #include <linux/interrupt.h> #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) #include <linux/usb/musb.h> @@ -187,6 +188,46 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) static struct resource smsc911x_resources[] = { { @@ -330,6 +371,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", @@ -337,7 +379,7 @@ static struct mtd_partition ezkit_partitions[] = { .offset = 0, }, { .name = "Kernel", - .size = 0xE0000, + .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { .name = "RootFS", @@ -367,6 +409,7 @@ static struct platform_device ezkit_flash_device = { .num_resources = 1, .resource = &ezkit_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -400,6 +443,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .cs_change_per_word = 0, @@ -443,6 +494,16 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", @@ -571,6 +632,29 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { +}; + +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 212, + }, +#endif +}; +#endif +#endif + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/gpio_keys.h> @@ -616,6 +700,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) &bf54x_lq043_device, #endif @@ -661,12 +749,25 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, +#endif }; static int __init ezkit_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info0, + ARRAY_SIZE(bfin_i2c_board_info0)); +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ + i2c_register_board_info(1, bfin_i2c_board_info1, + ARRAY_SIZE(bfin_i2c_board_info1)); +#endif +#endif + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) diff --git a/arch/blackfin/mach-bf548/cpu.c b/arch/blackfin/mach-bf548/cpu.c deleted file mode 100644 index 4298a3ccfbfc..000000000000 --- a/arch/blackfin/mach-bf548/cpu.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * File: arch/blackfin/mach-bf548/cpu.c - * Based on: - * Author: - * - * Created: - * Description: clock scaling for the bf54x - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=25000000 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) -#define VCO4 (CONFIG_CLKIN_HZ*36) -#define VCO3 (CONFIG_CLKIN_HZ*27) -#define VCO2 (CONFIG_CLKIN_HZ*18) -#define VCO1 (CONFIG_CLKIN_HZ*9) -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf548_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf548_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf548_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf548_freq_table[index].frequency; - vco_mhz = bf548_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf548_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf548_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf548_freq_table); -} - -static int __init __bf548_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf548_getfreq(0); - cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table); -} - -static struct freq_attr *bf548_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf548_driver = { - .verify = bf548_verify_speed, - .target = bf548_target, - .get = bf548_getfreq, - .init = __bf548_cpu_init, - .name = "bf548", - .owner = THIS_MODULE, - .attr = bf548_freq_attr, -}; - -static int __init bf548_cpu_init(void) -{ - return cpufreq_register_driver(&bf548_driver); -} - -static void __exit bf548_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf548_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF548 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf548_cpu_init); -module_exit(bf548_cpu_exit); diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index f5479298bb79..74730eb8ae1b 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> - struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -66,7 +66,7 @@ (struct dma_register *) MDMA_D3_NEXT_DESC_PTR, (struct dma_register *) MDMA_S3_NEXT_DESC_PTR, }; -EXPORT_SYMBOL(base_addr); +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 46222a75321a..f7191141a3ce 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -36,9 +36,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -456,18 +453,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index bf9e738a7c64..9fd580952fd8 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -283,6 +283,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT 119 @@ -330,6 +349,10 @@ static struct platform_device *cm_bf561_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, #endif @@ -349,7 +372,7 @@ static struct platform_device *cm_bf561_devices[] __initdata = { static int __init cm_bf561_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index d357f648d963..0d74b7d99209 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -78,7 +78,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -220,6 +220,26 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", @@ -227,7 +247,7 @@ static struct mtd_partition ezkit_partitions[] = { .offset = 0, }, { .name = "Kernel", - .size = 0xE0000, + .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { .name = "RootFS", @@ -257,6 +277,7 @@ static struct platform_device ezkit_flash_device = { .num_resources = 1, .resource = &ezkit_flash_resource, }; +#endif #ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ @@ -443,6 +464,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif @@ -460,7 +485,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c index fc80c5d059f8..2faa0072d614 100644 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -70,7 +70,7 @@ static struct platform_device *generic_board_devices[] __initdata = { static int __init generic_board_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); } diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index ec6a2207c202..c9174b39f98d 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -50,7 +50,7 @@ static struct platform_device *tepla_devices[] __initdata = { static int __init tepla_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices)); } diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c index 89c65bb0bed3..24415eb82698 100644 --- a/arch/blackfin/mach-bf561/dma.c +++ b/arch/blackfin/mach-bf561/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA1_0_NEXT_DESC_PTR, (struct dma_register *) DMA1_1_NEXT_DESC_PTR, (struct dma_register *) DMA1_2_NEXT_DESC_PTR, @@ -67,6 +69,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 96a3d456fb6d..5b8bd40851dd 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -139,26 +136,26 @@ ENTRY(__start) /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -411,18 +408,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 15e33ca1ce80..393081e9b680 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -6,4 +6,5 @@ obj-y := \ cache.o cacheinit.o entry.o \ interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o -obj-$(CONFIG_PM) += pm.o dpmc.o +obj-$(CONFIG_PM) += pm.o dpmc.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 2f6ce397780f..caaab49e9cfa 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -54,7 +54,8 @@ #endif /* CONFIG_BFIN_KERNEL_CLOCK */ +#ifdef CONFIG_MEM_SIZE #if (CONFIG_MEM_SIZE % 4) #error "SDRAM mem size must be multible of 4MB" #endif - +#endif diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c new file mode 100644 index 000000000000..ed81e00d20e1 --- /dev/null +++ b/arch/blackfin/mach-common/cpufreq.c @@ -0,0 +1,194 @@ +/* + * File: arch/blackfin/mach-common/cpufreq.c + * Based on: + * Author: + * + * Created: + * Description: Blackfin core clock scaling + * + * Modified: + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/fs.h> +#include <asm/blackfin.h> +#include <asm/time.h> + + +/* this is the table of CCLK frequencies, in Hz */ +/* .index is the entry in the auxillary dpm_state_table[] */ +static struct cpufreq_frequency_table bfin_freq_table[] = { + { + .frequency = CPUFREQ_TABLE_END, + .index = 0, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 1, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 2, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 0, + }, +}; + +static struct bfin_dpm_state { + unsigned int csel; /* system clock divider */ + unsigned int tscale; /* change the divider on the core timer interrupt */ +} dpm_state_table[3]; + +/**************************************************************************/ + +static unsigned int bfin_getfreq(unsigned int cpu) +{ + /* The driver only support single cpu */ + if (cpu != 0) + return -1; + + return get_cclk(); +} + + +static int bfin_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int index, plldiv, tscale; + unsigned long flags, cclk_hz; + struct cpufreq_freqs freqs; + + if (cpufreq_frequency_table_target(policy, bfin_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + cclk_hz = bfin_freq_table[index].frequency; + + freqs.old = bfin_getfreq(0); + freqs.new = cclk_hz; + freqs.cpu = 0; + + pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", + cclk_hz, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; + tscale = dpm_state_table[index].tscale; + bfin_write_PLL_DIV(plldiv); + /* we have to adjust the core timer, because it is using cclk */ + bfin_write_TSCALE(tscale); + SSYNC(); + local_irq_restore(flags); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int bfin_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, bfin_freq_table); +} + +static int __init __bfin_cpu_init(struct cpufreq_policy *policy) +{ + + unsigned long cclk, sclk, csel, min_cclk; + int index; + +#ifdef CONFIG_CYCLES_CLOCKSOURCE +/* + * Clocksource CYCLES is still CONTINUOUS but not longer MONOTONIC in case we enable + * CPU frequency scaling, since CYCLES runs off Core Clock. + */ + printk(KERN_WARNING "CPU frequency scaling not supported: Clocksource not suitable\n" + return -ENODEV; +#endif + + if (policy->cpu != 0) + return -EINVAL; + + cclk = get_cclk(); + sclk = get_sclk(); + +#if ANOMALY_05000273 + min_cclk = sclk * 2; +#else + min_cclk = sclk; +#endif + csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); + + for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) { + bfin_freq_table[index].frequency = cclk >> index; + dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ + dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; + + pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n", + bfin_freq_table[index].frequency, + dpm_state_table[index].csel, + dpm_state_table[index].tscale); + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000; + /*Now ,only support one cpu */ + policy->cur = cclk; + cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); +} + +static struct freq_attr *bfin_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bfin_driver = { + .verify = bfin_verify_speed, + .target = bfin_target, + .get = bfin_getfreq, + .init = __bfin_cpu_init, + .name = "bfin cpufreq", + .owner = THIS_MODULE, + .attr = bfin_freq_attr, +}; + +static int __init bfin_cpu_init(void) +{ + return cpufreq_register_driver(&bfin_driver); +} + +static void __exit bfin_cpu_exit(void) +{ + cpufreq_unregister_driver(&bfin_driver); +} + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("cpufreq driver for Blackfin"); +MODULE_LICENSE("GPL"); + +module_init(bfin_cpu_init); +module_exit(bfin_cpu_exit); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index cee54cebbc65..f2fb87e9a46e 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -38,6 +38,7 @@ #include <linux/unistd.h> #include <asm/blackfin.h> #include <asm/errno.h> +#include <asm/fixed_code.h> #include <asm/thread_info.h> /* TIF_NEED_RESCHED */ #include <asm/asm-offsets.h> #include <asm/trace.h> @@ -52,15 +53,6 @@ # define EX_SCRATCH_REG CYCLES #endif -#if ANOMALY_05000281 -ENTRY(_safe_speculative_execution) - NOP; - NOP; - NOP; - jump _safe_speculative_execution; -ENDPROC(_safe_speculative_execution) -#endif - #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else @@ -121,10 +113,14 @@ ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SAVE_ALL_SYS - DEBUG_HWTRACE_SAVE(p5, r7) #ifdef CONFIG_MPU + /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that + * will change the stack pointer. */ R0 = SEQSTAT; R1 = SP; +#endif + DEBUG_HWTRACE_SAVE(p5, r7) +#ifdef CONFIG_MPU sp += -12; call _cplb_hdr; sp += 12; @@ -191,6 +187,7 @@ ENTRY(_bfin_return_from_exception) ENDPROC(_bfin_return_from_exception) ENTRY(_handle_bad_cplb) + DEBUG_HWTRACE_RESTORE(p5, r7) /* To get here, we just tried and failed to change a CPLB * so, handle things in trap_c (C code), by lowering to * IRQ5, just like we normally do. Since this is not a @@ -225,6 +222,26 @@ ENTRY(_ex_trap_c) [p4] = p5; csync; + p4.l = lo(DCPLB_FAULT_ADDR); + p4.h = hi(DCPLB_FAULT_ADDR); + r7 = [p4]; + p5.h = _saved_dcplb_fault_addr; + p5.l = _saved_dcplb_fault_addr; + [p5] = r7; + + r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)]; + p5.h = _saved_icplb_fault_addr; + p5.l = _saved_icplb_fault_addr; + [p5] = r7; + + p4.l = __retx; + p4.h = __retx; + r6 = retx; + [p4] = r6; + p4.l = lo(SAFE_USER_INSTRUCTION); + p4.h = hi(SAFE_USER_INSTRUCTION); + retx = p4; + /* Disable all interrupts, but make sure level 5 is enabled so * we can switch to that level. Save the old mask. */ cli r6; @@ -234,23 +251,6 @@ ENTRY(_ex_trap_c) r6 = 0x3f; sti r6; - /* Save the excause into a circular buffer, in case the instruction - * which caused this excecptions causes others. - */ - P5.l = _in_ptr_excause; - P5.h = _in_ptr_excause; - R7 = [P5]; - R7 += 4; - R6 = 0xF; - R7 = R7 & R6; - [P5] = R7; - R6.l = _excause_circ_buf; - R6.h = _excause_circ_buf; - R7 = R7 + R6; - p5 = R7; - R6 = SEQSTAT; - [P5] = R6; - (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SP = EX_SCRATCH_REG; @@ -307,6 +307,11 @@ ENDPROC(_double_fault) ENTRY(_exception_to_level5) SAVE_ALL_SYS + p4.l = __retx; + p4.h = __retx; + r6 = [p4]; + [sp + PT_PC] = r6; + /* Restore interrupt mask. We haven't pushed RETI, so this * doesn't enable interrupts until we return from this handler. */ p4.l = _excpt_saved_imask; @@ -328,42 +333,11 @@ ENTRY(_exception_to_level5) r0 = [p2]; /* Read current IPEND */ [sp + PT_IPEND] = r0; /* Store IPEND */ - /* Pop the excause from the circular buffer and push it on the stack - * (in the right place - if you change the location of SEQSTAT, you - * must change this offset. - */ -.L_excep_to_5_again: - P5.l = _out_ptr_excause; - P5.h = _out_ptr_excause; - R7 = [P5]; - R7 += 4; - R6 = 0xF; - R7 = R7 & R6; - [P5] = R7; - R6.l = _excause_circ_buf; - R6.h = _excause_circ_buf; - R7 = R7 + R6; - P5 = R7; - R1 = [P5]; - [SP + PT_SEQSTAT] = r1; - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; call _trap_c; SP += 12; - /* See if anything else is in the exception buffer - * if there is, process it - */ - P5.l = _out_ptr_excause; - P5.h = _out_ptr_excause; - P4.l = _in_ptr_excause; - P4.h = _in_ptr_excause; - R6 = [P5]; - R7 = [P4]; - CC = R6 == R7; - if ! CC JUMP .L_excep_to_5_again - call _ret_from_exception; RESTORE_ALL_SYS rti; @@ -727,8 +701,8 @@ ENTRY(_return_from_int) [p0] = p1; csync; #if ANOMALY_05000281 - r0.l = _safe_speculative_execution; - r0.h = _safe_speculative_execution; + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; #endif r0 = 0x801f (z); @@ -741,8 +715,8 @@ ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) #if ANOMALY_05000281 - r0.l = _safe_speculative_execution; - r0.h = _safe_speculative_execution; + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; #endif r0 = 0x401f; @@ -809,20 +783,6 @@ _schedule_and_signal: rti; ENDPROC(_lower_to_irq14) -/* Make sure when we start, that the circular buffer is initialized properly - * R0 and P0 are call clobbered, so we can use them here. - */ -ENTRY(_init_exception_buff) - r0 = 0; - p0.h = _in_ptr_excause; - p0.l = _in_ptr_excause; - [p0] = r0; - p0.h = _out_ptr_excause; - p0.l = _out_ptr_excause; - [p0] = r0; - rts; -ENDPROC(_init_exception_buff) - /* We handle this 100% in exception space - to reduce overhead * Only potiential problem is if the software buffer gets swapped out of the * CPLB table - then double fault. - so we don't let this happen in other places @@ -1398,17 +1358,7 @@ _exception_stack_top: _last_cplb_fault_retx: .long 0; #endif -/* - * Single instructions can have multiple faults, which need to be - * handled by traps.c, in irq5. We store the exception cause to ensure - * we don't miss a double fault condition - */ -ENTRY(_in_ptr_excause) + /* Used to save the real RETX when temporarily storing a safe + * return address. */ +__retx: .long 0; -ENTRY(_out_ptr_excause) - .long 0; -ALIGN -ENTRY(_excause_circ_buf) - .rept 4 - .long 0 - .endr diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 225ef14af75e..f5fd768022ea 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -316,7 +316,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, printk(KERN_ERR "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR" " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", - __FUNCTION__, __FILE__, __LINE__); + __func__, __FILE__, __LINE__); } #endif /* BF537_GENERIC_ERROR_INT_DEMUX */ @@ -326,6 +326,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; +extern void bfin_gpio_irq_prepare(unsigned gpio); static void bfin_gpio_ack_irq(unsigned int irq) { @@ -364,35 +365,25 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { - unsigned int ret; u16 gpionr = irq - IRQ_PF0; - char buf[8]; - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); bfin_gpio_unmask_irq(irq); - return ret; + return 0; } static void bfin_gpio_irq_shutdown(unsigned int irq) { bfin_gpio_mask_irq(irq); - gpio_free(irq - IRQ_PF0); gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { - - unsigned int ret; - char buf[8]; u16 gpionr = irq - IRQ_PF0; if (type == IRQ_TYPE_PROBE) { @@ -404,12 +395,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); } else { @@ -595,6 +582,8 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { (struct pin_int_t *)PINT3_MASK_SET, }; +extern void bfin_gpio_irq_prepare(unsigned gpio); + inline unsigned short get_irq_base(u8 bank, u8 bmap) { @@ -697,8 +686,6 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { - unsigned int ret; - char buf[8]; u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; @@ -709,17 +696,13 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) return -ENODEV; } - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); bfin_gpio_unmask_irq(irq); - return ret; + return 0; } static void bfin_gpio_irq_shutdown(unsigned int irq) @@ -727,15 +710,12 @@ static void bfin_gpio_irq_shutdown(unsigned int irq) u16 gpionr = irq_to_gpio(irq); bfin_gpio_mask_irq(irq); - gpio_free(gpionr); gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { - unsigned int ret; - char buf[8]; u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); @@ -753,12 +733,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); } else { @@ -766,8 +742,6 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) return 0; } - gpio_direction_input(gpionr); - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ else @@ -965,8 +939,6 @@ int __init init_arch_irq(void) local_irq_disable(); - init_exception_buff(); - #ifdef CONFIG_BF54x # ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 28b87fe9ce3c..30b887e67dd6 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -174,7 +174,7 @@ ENTRY(_cache_lock) CLI R3; R7 = [P1]; - R2 = 0xFFFFFF87 (X); + R2 = ~(0x78) (X); /* mask out ILOC */ R7 = R7 & R2; R0 = R0 << 3; R7 = R0 | R7; diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index e41f0e8ecacb..3246f91c7baa 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -401,7 +401,7 @@ EXPORT_SYMBOL(l1_data_sram_free); void *l1_inst_sram_alloc(size_t size) { -#if L1_DATA_A_LENGTH != 0 +#if L1_CODE_LENGTH != 0 unsigned flags; void *addr; diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c index cb8b8d5af34f..0f6d303a8891 100644 --- a/arch/blackfin/oprofile/common.c +++ b/arch/blackfin/oprofile/common.c @@ -75,7 +75,7 @@ static int op_bfin_start(void) { int ret = -EBUSY; - printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__); + printk(KERN_INFO "KSDBG:in %s\n", __func__); mutex_lock(&pfmon_lock); if (!pfmon_enabled) { ret = model->start(ctr); diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c index 872dffe33623..d1c698bb9ee5 100644 --- a/arch/blackfin/oprofile/op_model_bf533.c +++ b/arch/blackfin/oprofile/op_model_bf533.c @@ -125,7 +125,7 @@ int pm_overflow_handler(int irq, struct pt_regs *regs) unsigned int pc, pfctl; unsigned int count[2]; - pr_debug("get interrupt in %s\n", __FUNCTION__); + pr_debug("get interrupt in %s\n", __func__); if (oprofile_running == 0) { pr_debug("error: entering interrupt when oprofile is stopped.\n\r"); return -1; diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 135644f8add7..484c83d23eef 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -1409,7 +1409,6 @@ syscall_is_too_hard: st %o0, [%sp + STACKFRAME_SZ + PT_I0] - .globl ret_sys_call ret_sys_call: ld [%curptr + TI_FLAGS], %l6 cmp %o0, -ERESTART_RESTARTBLOCK diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c index 1f730619a24a..3e849e8e3480 100644 --- a/arch/sparc/kernel/signal.c +++ b/arch/sparc/kernel/signal.c @@ -105,11 +105,6 @@ static int _sigpause_common(old_sigset_t set) return -ERESTARTNOHAND; } -asmlinkage int sys_sigpause(unsigned int set) -{ - return _sigpause_common(set); -} - asmlinkage int sys_sigsuspend(old_sigset_t set) { return _sigpause_common(set); diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index df3eacb5ca15..8acc5cc38621 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -250,6 +250,26 @@ endchoice endmenu +config NUMA + bool "NUMA support" + +config NODES_SHIFT + int + default "4" + depends on NEED_MULTIPLE_NODES + +# Some NUMA nodes have memory ranges that span +# other nodes. Even though a pfn is valid and +# between a node's start and end pfns, it may not +# reside on that node. See memmap_init_zone() +# for details. +config NODES_SPAN_OTHER_NODES + def_bool y + depends on NEED_MULTIPLE_NODES + +config ARCH_POPULATES_NODE_MAP + def_bool y + config ARCH_SELECT_MEMORY_MODEL def_bool y diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index e1835868ad36..92f79680f70d 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Sun Apr 20 01:33:21 2008 +# Linux kernel version: 2.6.25-numa +# Wed Apr 23 04:49:08 2008 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -152,6 +152,8 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set +# CONFIG_NUMA is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y @@ -787,7 +789,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -869,6 +870,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices @@ -1219,10 +1221,6 @@ CONFIG_USB_STORAGE=m # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1399,6 +1397,7 @@ CONFIG_SCHEDSTATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1425,53 +1424,82 @@ CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_XTS=m -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_SEED=m # CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1492,3 +1520,4 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c index 04ab81cb4f48..bc2632274840 100644 --- a/arch/sparc64/kernel/ebus.c +++ b/arch/sparc64/kernel/ebus.c @@ -396,6 +396,7 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de sd->op = &dev->ofdev; sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu; sd->stc = dev->bus->ofdev.dev.parent->archdata.stc; + sd->numa_node = dev->bus->ofdev.dev.parent->archdata.numa_node; dev->ofdev.node = dp; dev->ofdev.dev.parent = &dev->bus->ofdev.dev; diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index fb43c76bdc26..fd06e937ae1e 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -47,7 +47,7 @@ do_fpdis: ba,pt %xcc, etrap 109: or %g7, %lo(109b), %g7 add %g0, %g0, %g0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap 1: TRAP_LOAD_THREAD_REG(%g6, %g1) ldub [%g6 + TI_FPSAVED], %g5 @@ -226,7 +226,7 @@ fp_other_bounce: call do_fpother add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop .globl do_fpother_check_fitos .align 32 @@ -489,7 +489,7 @@ utrap_trap: /* %g3=handler,%g4=level */ call bad_trap add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop invoke_utrap: sllx %g3, 3, %g3 @@ -607,7 +607,7 @@ __spitfire_cee_trap_continue: call spitfire_access_error add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop /* This is the trap handler entry point for ECC correctable * errors. They are corrected, but we listen for the trap @@ -686,7 +686,7 @@ __spitfire_data_access_exception_tl1: call spitfire_data_access_exception_tl1 add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop __spitfire_data_access_exception: rdpr %pstate, %g4 @@ -705,7 +705,7 @@ __spitfire_data_access_exception: call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop .globl __spitfire_insn_access_exception .globl __spitfire_insn_access_exception_tl1 @@ -725,7 +725,7 @@ __spitfire_insn_access_exception_tl1: call spitfire_insn_access_exception_tl1 add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop __spitfire_insn_access_exception: rdpr %pstate, %g4 @@ -743,7 +743,7 @@ __spitfire_insn_access_exception: call spitfire_insn_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop /* These get patched into the trap table at boot time * once we know we have a cheetah processor. @@ -937,7 +937,7 @@ do_dcpe_tl1_fatal: call cheetah_plus_parity_error add %sp, PTREGS_OFF, %o1 ba,pt %xcc, rtrap - clr %l6 + nop do_icpe_tl1: rdpr %tl, %g1 ! Save original trap level @@ -979,7 +979,7 @@ do_icpe_tl1_fatal: call cheetah_plus_parity_error add %sp, PTREGS_OFF, %o1 ba,pt %xcc, rtrap - clr %l6 + nop dcpe_icpe_tl1_common: /* Flush D-cache, re-enable D/I caches in DCU and finally @@ -1281,7 +1281,7 @@ __do_privact: call do_privact add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop .globl do_mna do_mna: @@ -1308,7 +1308,7 @@ do_mna: call mem_address_unaligned add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop .globl do_lddfmna do_lddfmna: @@ -1326,7 +1326,7 @@ do_lddfmna: call handle_lddfmna add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop .globl do_stdfmna do_stdfmna: @@ -1344,7 +1344,7 @@ do_stdfmna: call handle_stdfmna add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap - clr %l6 + nop .globl breakpoint_trap breakpoint_trap: @@ -1424,13 +1424,13 @@ sys32_rt_sigreturn: 1: ldx [%curptr + TI_FLAGS], %l5 andcc %l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0 be,pt %icc, rtrap - clr %l6 + nop add %sp, PTREGS_OFF, %o0 call syscall_trace mov 1, %o1 ba,pt %xcc, rtrap - clr %l6 + nop /* This is how fork() was meant to be done, 8 instruction entry. * @@ -1559,7 +1559,7 @@ linux_sparc_syscall32: /* Linux native system calls enter here... */ .align 32 - .globl linux_sparc_syscall, ret_sys_call + .globl linux_sparc_syscall linux_sparc_syscall: /* Direct access to user regs, much faster. */ cmp %g1, NR_SYSCALLS ! IEU1 Group @@ -1605,7 +1605,7 @@ ret_sys_call: bne,pn %icc, linux_syscall_trace2 add %l1, 0x4, %l2 ! npc = npc+4 stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC] - ba,pt %xcc, rtrap_clr_l6 + ba,pt %xcc, rtrap stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC] 1: @@ -1616,7 +1616,6 @@ ret_sys_call: sub %g0, %o0, %o0 or %g3, %g2, %g3 stx %o0, [%sp + PTREGS_OFF + PT_V9_I0] - mov 1, %l6 stx %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE] bne,pn %icc, linux_syscall_trace2 add %l1, 0x4, %l2 ! npc = npc+4 diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h index 4a91e9c6d31b..32fbab620852 100644 --- a/arch/sparc64/kernel/entry.h +++ b/arch/sparc64/kernel/entry.h @@ -20,7 +20,6 @@ extern void timer_interrupt(int irq, struct pt_regs *regs); extern void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, - int restart_syscall, unsigned long thread_info_flags); extern asmlinkage void syscall_trace(struct pt_regs *regs, diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 4b2bf9eb447a..b49d3b60bc0c 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -53,7 +53,11 @@ etrap_irq: stx %g3, [%g2 + STACKFRAME_SZ + PT_V9_TPC] rd %y, %g3 stx %g1, [%g2 + STACKFRAME_SZ + PT_V9_TNPC] + rdpr %tt, %g1 st %g3, [%g2 + STACKFRAME_SZ + PT_V9_Y] + sethi %hi(PT_REGS_MAGIC), %g3 + or %g3, %g1, %g1 + st %g1, [%g2 + STACKFRAME_SZ + PT_V9_MAGIC] rdpr %cansave, %g1 brnz,pt %g1, etrap_save diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c index 756fa24eeefa..2a37a6ca2a16 100644 --- a/arch/sparc64/kernel/iommu.c +++ b/arch/sparc64/kernel/iommu.c @@ -173,9 +173,11 @@ void iommu_range_free(struct iommu *iommu, dma_addr_t dma_addr, unsigned long np } int iommu_table_init(struct iommu *iommu, int tsbsize, - u32 dma_offset, u32 dma_addr_mask) + u32 dma_offset, u32 dma_addr_mask, + int numa_node) { - unsigned long i, tsbbase, order, sz, num_tsb_entries; + unsigned long i, order, sz, num_tsb_entries; + struct page *page; num_tsb_entries = tsbsize / sizeof(iopte_t); @@ -188,11 +190,12 @@ int iommu_table_init(struct iommu *iommu, int tsbsize, /* Allocate and initialize the free area map. */ sz = num_tsb_entries / 8; sz = (sz + 7UL) & ~7UL; - iommu->arena.map = kzalloc(sz, GFP_KERNEL); + iommu->arena.map = kmalloc_node(sz, GFP_KERNEL, numa_node); if (!iommu->arena.map) { printk(KERN_ERR "IOMMU: Error, kmalloc(arena.map) failed.\n"); return -ENOMEM; } + memset(iommu->arena.map, 0, sz); iommu->arena.limit = num_tsb_entries; if (tlb_type != hypervisor) @@ -201,21 +204,23 @@ int iommu_table_init(struct iommu *iommu, int tsbsize, /* Allocate and initialize the dummy page which we * set inactive IO PTEs to point to. */ - iommu->dummy_page = get_zeroed_page(GFP_KERNEL); - if (!iommu->dummy_page) { + page = alloc_pages_node(numa_node, GFP_KERNEL, 0); + if (!page) { printk(KERN_ERR "IOMMU: Error, gfp(dummy_page) failed.\n"); goto out_free_map; } + iommu->dummy_page = (unsigned long) page_address(page); + memset((void *)iommu->dummy_page, 0, PAGE_SIZE); iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page); /* Now allocate and setup the IOMMU page table itself. */ order = get_order(tsbsize); - tsbbase = __get_free_pages(GFP_KERNEL, order); - if (!tsbbase) { + page = alloc_pages_node(numa_node, GFP_KERNEL, order); + if (!page) { printk(KERN_ERR "IOMMU: Error, gfp(tsb) failed.\n"); goto out_free_dummy_page; } - iommu->page_table = (iopte_t *)tsbbase; + iommu->page_table = (iopte_t *)page_address(page); for (i = 0; i < num_tsb_entries; i++) iopte_make_dummy(iommu, &iommu->page_table[i]); @@ -276,20 +281,24 @@ static inline void iommu_free_ctx(struct iommu *iommu, int ctx) static void *dma_4u_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp) { + unsigned long flags, order, first_page; struct iommu *iommu; + struct page *page; + int npages, nid; iopte_t *iopte; - unsigned long flags, order, first_page; void *ret; - int npages; size = IO_PAGE_ALIGN(size); order = get_order(size); if (order >= 10) return NULL; - first_page = __get_free_pages(gfp, order); - if (first_page == 0UL) + nid = dev->archdata.numa_node; + page = alloc_pages_node(nid, gfp, order); + if (unlikely(!page)) return NULL; + + first_page = (unsigned long) page_address(page); memset((char *)first_page, 0, PAGE_SIZE << order); iommu = dev->archdata.iommu; diff --git a/arch/sparc64/kernel/isa.c b/arch/sparc64/kernel/isa.c index b5f7b354084f..a2af5ed784c9 100644 --- a/arch/sparc64/kernel/isa.c +++ b/arch/sparc64/kernel/isa.c @@ -92,6 +92,7 @@ static void __init isa_fill_devices(struct sparc_isa_bridge *isa_br) sd->op = &isa_dev->ofdev; sd->iommu = isa_br->ofdev.dev.parent->archdata.iommu; sd->stc = isa_br->ofdev.dev.parent->archdata.stc; + sd->numa_node = isa_br->ofdev.dev.parent->archdata.numa_node; isa_dev->ofdev.node = dp; isa_dev->ofdev.dev.parent = &isa_br->ofdev.dev; diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c index 910083589569..dde52bcf5c64 100644 --- a/arch/sparc64/kernel/mdesc.c +++ b/arch/sparc64/kernel/mdesc.c @@ -1,10 +1,10 @@ /* mdesc.c: Sun4V machine description handling. * - * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net> */ #include <linux/kernel.h> #include <linux/types.h> -#include <linux/bootmem.h> +#include <linux/lmb.h> #include <linux/log2.h> #include <linux/list.h> #include <linux/slab.h> @@ -84,24 +84,28 @@ static void mdesc_handle_init(struct mdesc_handle *hp, hp->handle_size = handle_size; } -static struct mdesc_handle * __init mdesc_bootmem_alloc(unsigned int mdesc_size) +static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size) { - struct mdesc_handle *hp; unsigned int handle_size, alloc_size; + struct mdesc_handle *hp; + unsigned long paddr; handle_size = (sizeof(struct mdesc_handle) - sizeof(struct mdesc_hdr) + mdesc_size); alloc_size = PAGE_ALIGN(handle_size); - hp = __alloc_bootmem(alloc_size, PAGE_SIZE, 0UL); - if (hp) - mdesc_handle_init(hp, handle_size, hp); + paddr = lmb_alloc(alloc_size, PAGE_SIZE); + hp = NULL; + if (paddr) { + hp = __va(paddr); + mdesc_handle_init(hp, handle_size, hp); + } return hp; } -static void mdesc_bootmem_free(struct mdesc_handle *hp) +static void mdesc_lmb_free(struct mdesc_handle *hp) { unsigned int alloc_size, handle_size = hp->handle_size; unsigned long start, end; @@ -124,9 +128,9 @@ static void mdesc_bootmem_free(struct mdesc_handle *hp) } } -static struct mdesc_mem_ops bootmem_mdesc_ops = { - .alloc = mdesc_bootmem_alloc, - .free = mdesc_bootmem_free, +static struct mdesc_mem_ops lmb_mdesc_ops = { + .alloc = mdesc_lmb_alloc, + .free = mdesc_lmb_free, }; static struct mdesc_handle *mdesc_kmalloc(unsigned int mdesc_size) @@ -888,7 +892,7 @@ void __init sun4v_mdesc_init(void) printk("MDESC: Size is %lu bytes.\n", len); - hp = mdesc_alloc(len, &bootmem_mdesc_ops); + hp = mdesc_alloc(len, &lmb_mdesc_ops); if (hp == NULL) { prom_printf("MDESC: alloc of %lu bytes failed.\n", len); prom_halt(); diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index 0fd9db95b896..9e58e8cba1c3 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -6,6 +6,7 @@ #include <linux/mod_devicetable.h> #include <linux/slab.h> #include <linux/errno.h> +#include <linux/irq.h> #include <linux/of_device.h> #include <linux/of_platform.h> @@ -660,6 +661,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op, struct device_node *dp = op->node; struct device_node *pp, *ip; unsigned int orig_irq = irq; + int nid; if (irq == 0xffffffff) return irq; @@ -672,7 +674,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op, printk("%s: direct translate %x --> %x\n", dp->full_name, orig_irq, irq); - return irq; + goto out; } /* Something more complicated. Walk up to the root, applying @@ -744,6 +746,14 @@ static unsigned int __init build_one_device_irq(struct of_device *op, printk("%s: Apply IRQ trans [%s] %x --> %x\n", op->node->full_name, ip->full_name, orig_irq, irq); +out: + nid = of_node_to_nid(dp); + if (nid != -1) { + cpumask_t numa_mask = node_to_cpumask(nid); + + irq_set_affinity(irq, numa_mask); + } + return irq; } diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 545356b00e2e..49f912766519 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -369,10 +369,12 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, sd->host_controller = pbm; sd->prom_node = node; sd->op = of_find_device_by_node(node); + sd->numa_node = pbm->numa_node; sd = &sd->op->dev.archdata; sd->iommu = pbm->iommu; sd->stc = &pbm->stc; + sd->numa_node = pbm->numa_node; type = of_get_property(node, "device_type", NULL); if (type == NULL) @@ -1159,6 +1161,16 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return 0; } +#ifdef CONFIG_NUMA +int pcibus_to_node(struct pci_bus *pbus) +{ + struct pci_pbm_info *pbm = pbus->sysdata; + + return pbm->numa_node; +} +EXPORT_SYMBOL(pcibus_to_node); +#endif + /* Return the domain nuber for this pci bus */ int pci_domain_nr(struct pci_bus *pbus) diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c index 7571ed563147..d23bb6f53cda 100644 --- a/arch/sparc64/kernel/pci_fire.c +++ b/arch/sparc64/kernel/pci_fire.c @@ -71,7 +71,8 @@ static int pci_fire_pbm_iommu_init(struct pci_pbm_info *pbm) */ fire_write(iommu->iommu_flushinv, ~(u64)0); - err = iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask); + err = iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask, + pbm->numa_node); if (err) return err; @@ -449,6 +450,8 @@ static int __init pci_fire_pbm_init(struct pci_controller_info *p, pbm->next = pci_pbm_root; pci_pbm_root = pbm; + pbm->numa_node = -1; + pbm->scan_bus = pci_fire_scan_bus; pbm->pci_ops = &sun4u_pci_ops; pbm->config_space_reg_bits = 12; diff --git a/arch/sparc64/kernel/pci_impl.h b/arch/sparc64/kernel/pci_impl.h index 4a50da13ce48..218bac4ff79b 100644 --- a/arch/sparc64/kernel/pci_impl.h +++ b/arch/sparc64/kernel/pci_impl.h @@ -148,6 +148,8 @@ struct pci_pbm_info { struct pci_bus *pci_bus; void (*scan_bus)(struct pci_pbm_info *); struct pci_ops *pci_ops; + + int numa_node; }; struct pci_controller_info { @@ -161,8 +163,6 @@ extern struct pci_pbm_info *pci_pbm_root; extern int pci_num_pbms; /* PCI bus scanning and fixup support. */ -extern void pci_iommu_table_init(struct iommu *iommu, int tsbsize, - u32 dma_offset, u32 dma_addr_mask); extern void pci_get_pbm_props(struct pci_pbm_info *pbm); extern struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm); extern void pci_determine_mem_io_space(struct pci_pbm_info *pbm); diff --git a/arch/sparc64/kernel/pci_msi.c b/arch/sparc64/kernel/pci_msi.c index d6d64b44af63..db5e8fd8f674 100644 --- a/arch/sparc64/kernel/pci_msi.c +++ b/arch/sparc64/kernel/pci_msi.c @@ -279,11 +279,17 @@ static int bringup_one_msi_queue(struct pci_pbm_info *pbm, unsigned long devino) { int irq = ops->msiq_build_irq(pbm, msiqid, devino); - int err; + int err, nid; if (irq < 0) return irq; + nid = pbm->numa_node; + if (nid != -1) { + cpumask_t numa_mask = node_to_cpumask(nid); + + irq_set_affinity(irq, numa_mask); + } err = request_irq(irq, sparc64_msiq_interrupt, 0, "MSIQ", &pbm->msiq_irq_cookies[msiqid - pbm->msiq_first]); diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 0bad96e5d184..994dbe0603da 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -848,7 +848,8 @@ static int psycho_iommu_init(struct pci_pbm_info *pbm) /* Leave diag mode enabled for full-flushing done * in pci_iommu.c */ - err = iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff); + err = iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff, + pbm->numa_node); if (err) return err; @@ -979,6 +980,8 @@ static void __init psycho_pbm_init(struct pci_controller_info *p, pbm->next = pci_pbm_root; pci_pbm_root = pbm; + pbm->numa_node = -1; + pbm->scan_bus = psycho_scan_bus; pbm->pci_ops = &sun4u_pci_ops; pbm->config_space_reg_bits = 8; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 1c5f5fa2339f..4c34195baf37 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -704,7 +704,7 @@ static int sabre_iommu_init(struct pci_pbm_info *pbm, * in pci_iommu.c */ err = iommu_table_init(iommu, tsbsize * 1024 * 8, - dvma_offset, dma_mask); + dvma_offset, dma_mask, pbm->numa_node); if (err) return err; @@ -737,6 +737,8 @@ static void __init sabre_pbm_init(struct pci_controller_info *p, pbm->name = dp->full_name; printk("%s: SABRE PCI Bus Module\n", pbm->name); + pbm->numa_node = -1; + pbm->scan_bus = sabre_scan_bus; pbm->pci_ops = &sun4u_pci_ops; pbm->config_space_reg_bits = 8; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index e30609362322..615edd9c8e2a 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1220,7 +1220,8 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm) /* Leave diag mode enabled for full-flushing done * in pci_iommu.c */ - err = iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask); + err = iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask, + pbm->numa_node); if (err) return err; @@ -1379,6 +1380,8 @@ static int __init schizo_pbm_init(struct pci_controller_info *p, pbm->next = pci_pbm_root; pci_pbm_root = pbm; + pbm->numa_node = -1; + pbm->scan_bus = schizo_scan_bus; pbm->pci_ops = &sun4u_pci_ops; pbm->config_space_reg_bits = 8; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 01839706bd52..e2bb9790039c 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -127,10 +127,12 @@ static inline long iommu_batch_end(void) static void *dma_4v_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp) { - struct iommu *iommu; unsigned long flags, order, first_page, npages, n; + struct iommu *iommu; + struct page *page; void *ret; long entry; + int nid; size = IO_PAGE_ALIGN(size); order = get_order(size); @@ -139,10 +141,12 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size, npages = size >> IO_PAGE_SHIFT; - first_page = __get_free_pages(gfp, order); - if (unlikely(first_page == 0UL)) + nid = dev->archdata.numa_node; + page = alloc_pages_node(nid, gfp, order); + if (unlikely(!page)) return NULL; + first_page = (unsigned long) page_address(page); memset((char *)first_page, 0, PAGE_SIZE << order); iommu = dev->archdata.iommu; @@ -899,6 +903,8 @@ static void __init pci_sun4v_pbm_init(struct pci_controller_info *p, pbm->next = pci_pbm_root; pci_pbm_root = pbm; + pbm->numa_node = of_node_to_nid(dp); + pbm->scan_bus = pci_sun4v_scan_bus; pbm->pci_ops = &sun4v_pci_ops; pbm->config_space_reg_bits = 12; @@ -913,6 +919,7 @@ static void __init pci_sun4v_pbm_init(struct pci_controller_info *p, pbm->name = dp->full_name; printk("%s: SUN4V PCI Bus Module\n", pbm->name); + printk("%s: On NUMA node %d\n", pbm->name, pbm->numa_node); pci_determine_mem_io_space(pbm); diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 68964ddcde1e..ed03a18d3b36 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -19,8 +19,8 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/mm.h> -#include <linux/bootmem.h> #include <linux/module.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/of_device.h> @@ -122,16 +122,20 @@ int of_find_in_proplist(const char *list, const char *match, int len) } EXPORT_SYMBOL(of_find_in_proplist); -static unsigned int prom_early_allocated; +static unsigned int prom_early_allocated __initdata; static void * __init prom_early_alloc(unsigned long size) { + unsigned long paddr = lmb_alloc(size, SMP_CACHE_BYTES); void *ret; - ret = __alloc_bootmem(size, SMP_CACHE_BYTES, 0UL); - if (ret != NULL) - memset(ret, 0, size); + if (!paddr) { + prom_printf("prom_early_alloc(%lu) failed\n"); + prom_halt(); + } + ret = __va(paddr); + memset(ret, 0, size); prom_early_allocated += size; return ret; diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 079d18a11d24..ecf6753b204a 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -18,12 +18,6 @@ #define RTRAP_PSTATE_IRQOFF (PSTATE_RMO|PSTATE_PEF|PSTATE_PRIV) #define RTRAP_PSTATE_AG_IRQOFF (PSTATE_RMO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG) - /* Register %l6 keeps track of whether we are returning - * from a system call or not. It is cleared if we call - * do_notify_resume, and it must not be otherwise modified - * until we fully commit to returning to userspace. - */ - .text .align 32 __handle_softirq: @@ -56,14 +50,12 @@ __handle_user_windows: be,pt %xcc, __handle_user_windows_continue nop mov %l5, %o1 - mov %l6, %o2 add %sp, PTREGS_OFF, %o0 - mov %l0, %o3 + mov %l0, %o2 call do_notify_resume wrpr %g0, RTRAP_PSTATE, %pstate wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate - clr %l6 /* Signal delivery can modify pt_regs tstate, so we must * reload it. */ @@ -99,14 +91,12 @@ __handle_perfctrs: be,pt %xcc, __handle_perfctrs_continue sethi %hi(TSTATE_PEF), %o0 mov %l5, %o1 - mov %l6, %o2 add %sp, PTREGS_OFF, %o0 - mov %l0, %o3 + mov %l0, %o2 call do_notify_resume wrpr %g0, RTRAP_PSTATE, %pstate wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate - clr %l6 /* Signal delivery can modify pt_regs tstate, so we must * reload it. */ @@ -127,13 +117,11 @@ __handle_userfpu: __handle_signal: mov %l5, %o1 - mov %l6, %o2 add %sp, PTREGS_OFF, %o0 - mov %l0, %o3 + mov %l0, %o2 call do_notify_resume wrpr %g0, RTRAP_PSTATE, %pstate wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate - clr %l6 /* Signal delivery can modify pt_regs tstate, so we must * reload it. @@ -145,9 +133,8 @@ __handle_signal: andn %l1, %l4, %l1 .align 64 - .globl rtrap_irq, rtrap_clr_l6, rtrap, irqsz_patchme, rtrap_xcall + .globl rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall rtrap_irq: -rtrap_clr_l6: clr %l6 rtrap: #ifndef CONFIG_SMP sethi %hi(per_cpu____cpu_data), %l0 diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index d1fb13ba02b5..fa2827c4a3ad 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -544,6 +544,7 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus) sbus->ofdev.dev.archdata.iommu = iommu; sbus->ofdev.dev.archdata.stc = strbuf; + sbus->ofdev.dev.archdata.numa_node = -1; reg_base = regs + SYSIO_IOMMUREG_BASE; iommu->iommu_control = reg_base + IOMMU_CONTROL; @@ -575,7 +576,7 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus) sbus->portid, regs); /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */ - if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff)) + if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1)) goto fatal_memory_error; control = upa_readq(iommu->iommu_control); diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 6acb4c51cfe4..da5e6ee0c661 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -82,7 +82,7 @@ unsigned long cmdline_memory_size = 0; static struct console prom_early_console = { .name = "earlyprom", .write = prom_console_write, - .flags = CON_PRINTBUFFER | CON_BOOT, + .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, .index = -1, }; @@ -281,6 +281,7 @@ void __init setup_arch(char **cmdline_p) /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); strcpy(boot_command_line, *cmdline_p); + parse_early_param(); boot_flags_init(*cmdline_p); register_console(&prom_early_console); diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index 1c47009eb5ec..77a3e8592cbc 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -510,15 +510,20 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -static void do_signal(struct pt_regs *regs, unsigned long orig_i0, int restart_syscall) +static void do_signal(struct pt_regs *regs, unsigned long orig_i0) { - siginfo_t info; struct signal_deliver_cookie cookie; struct k_sigaction ka; - int signr; sigset_t *oldset; + siginfo_t info; + int signr, tt; - cookie.restart_syscall = restart_syscall; + tt = regs->magic & 0x1ff; + if (tt == 0x110 || tt == 0x111 || tt == 0x16d) { + regs->magic &= ~0x1ff; + cookie.restart_syscall = 1; + } else + cookie.restart_syscall = 0; cookie.orig_i0 = orig_i0; if (test_thread_flag(TIF_RESTORE_SIGMASK)) @@ -529,9 +534,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0, int restart_s #ifdef CONFIG_SPARC32_COMPAT if (test_thread_flag(TIF_32BIT)) { extern void do_signal32(sigset_t *, struct pt_regs *, - unsigned long, int); - do_signal32(oldset, regs, orig_i0, - cookie.restart_syscall); + struct signal_deliver_cookie *); + do_signal32(oldset, regs, &cookie); return; } #endif @@ -539,7 +543,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0, int restart_s signr = get_signal_to_deliver(&info, &ka, regs, &cookie); if (signr > 0) { if (cookie.restart_syscall) - syscall_restart(orig_i0, regs, &ka.sa); + syscall_restart(cookie.orig_i0, regs, &ka.sa); handle_signal(signr, &ka, &info, oldset, regs); /* a signal was successfully delivered; the saved @@ -576,11 +580,10 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0, int restart_s } } -void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, int restart_syscall, - unsigned long thread_info_flags) +void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long thread_info_flags) { if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) - do_signal(regs, orig_i0, restart_syscall); + do_signal(regs, orig_i0); } void ptrace_signal_deliver(struct pt_regs *regs, void *cookie) diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index 74e0512f135c..43cdec64d9c9 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -982,20 +982,16 @@ static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs * mistake. */ void do_signal32(sigset_t *oldset, struct pt_regs * regs, - unsigned long orig_i0, int restart_syscall) + struct signal_deliver_cookie *cookie) { - siginfo_t info; - struct signal_deliver_cookie cookie; struct k_sigaction ka; + siginfo_t info; int signr; - cookie.restart_syscall = restart_syscall; - cookie.orig_i0 = orig_i0; - - signr = get_signal_to_deliver(&info, &ka, regs, &cookie); + signr = get_signal_to_deliver(&info, &ka, regs, cookie); if (signr > 0) { - if (cookie.restart_syscall) - syscall_restart32(orig_i0, regs, &ka.sa); + if (cookie->restart_syscall) + syscall_restart32(cookie->orig_i0, regs, &ka.sa); handle_signal32(signr, &ka, &info, oldset, regs); /* a signal was successfully delivered; the saved @@ -1007,16 +1003,16 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs, clear_thread_flag(TIF_RESTORE_SIGMASK); return; } - if (cookie.restart_syscall && + if (cookie->restart_syscall && (regs->u_regs[UREG_I0] == ERESTARTNOHAND || regs->u_regs[UREG_I0] == ERESTARTSYS || regs->u_regs[UREG_I0] == ERESTARTNOINTR)) { /* replay the system call when we are done */ - regs->u_regs[UREG_I0] = cookie.orig_i0; + regs->u_regs[UREG_I0] = cookie->orig_i0; regs->tpc -= 4; regs->tnpc -= 4; } - if (cookie.restart_syscall && + if (cookie->restart_syscall && regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) { regs->u_regs[UREG_G1] = __NR_restart_syscall; regs->tpc -= 4; diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 59f020d69d4c..409dd71f2738 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -20,7 +20,7 @@ #include <linux/cache.h> #include <linux/jiffies.h> #include <linux/profile.h> -#include <linux/bootmem.h> +#include <linux/lmb.h> #include <asm/head.h> #include <asm/ptrace.h> @@ -866,14 +866,21 @@ void smp_call_function_client(int irq, struct pt_regs *regs) void *info = call_data->info; clear_softint(1 << irq); + + irq_enter(); + + if (!call_data->wait) { + /* let initiator proceed after getting data */ + atomic_inc(&call_data->finished); + } + + func(info); + + irq_exit(); + if (call_data->wait) { /* let initiator proceed only after completion */ - func(info); atomic_inc(&call_data->finished); - } else { - /* let initiator proceed after getting data */ - atomic_inc(&call_data->finished); - func(info); } } @@ -1032,7 +1039,9 @@ void smp_receive_signal(int cpu) void smp_receive_signal_client(int irq, struct pt_regs *regs) { + irq_enter(); clear_softint(1 << irq); + irq_exit(); } void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) @@ -1040,6 +1049,8 @@ void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) struct mm_struct *mm; unsigned long flags; + irq_enter(); + clear_softint(1 << irq); /* See if we need to allocate a new TLB context because @@ -1059,6 +1070,8 @@ void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) load_secondary_context(mm); __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT); + + irq_exit(); } void smp_new_mmu_context_version(void) @@ -1217,6 +1230,8 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs) { clear_softint(1 << irq); + irq_enter(); + preempt_disable(); __asm__ __volatile__("flushw"); @@ -1229,6 +1244,8 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs) prom_world(0); preempt_enable(); + + irq_exit(); } /* /proc/profile writes can call this, don't __init it please. */ @@ -1431,7 +1448,7 @@ EXPORT_SYMBOL(__per_cpu_shift); void __init real_setup_per_cpu_areas(void) { - unsigned long goal, size, i; + unsigned long paddr, goal, size, i; char *ptr; /* Copy section for each CPU (we discard the original) */ @@ -1441,8 +1458,13 @@ void __init real_setup_per_cpu_areas(void) for (size = PAGE_SIZE; size < goal; size <<= 1UL) __per_cpu_shift++; - ptr = alloc_bootmem_pages(size * NR_CPUS); + paddr = lmb_alloc(size * NR_CPUS, PAGE_SIZE); + if (!paddr) { + prom_printf("Cannot allocate per-cpu memory.\n"); + prom_halt(); + } + ptr = __va(paddr); __per_cpu_base = ptr - __per_cpu_start; for (i = 0; i < NR_CPUS; i++, ptr += size) diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 38736460b8db..66336590e830 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -68,8 +68,6 @@ extern void *__memscan_zero(void *, size_t); extern void *__memscan_generic(void *, int, size_t); extern int __memcmp(const void *, const void *, __kernel_size_t); extern __kernel_size_t strlen(const char *); -extern void linux_sparc_syscall(void); -extern void rtrap(void); extern void show_regs(struct pt_regs *); extern void syscall_trace(struct pt_regs *, int); extern void sys_sigsuspend(void); diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c index 84d39e873e88..01b52f561af4 100644 --- a/arch/sparc64/kernel/stacktrace.c +++ b/arch/sparc64/kernel/stacktrace.c @@ -20,6 +20,8 @@ void save_stack_trace(struct stack_trace *trace) thread_base = (unsigned long) tp; do { struct reg_window *rw; + struct pt_regs *regs; + unsigned long pc; /* Bogus frame pointer? */ if (fp < (thread_base + sizeof(struct thread_info)) || @@ -27,11 +29,19 @@ void save_stack_trace(struct stack_trace *trace) break; rw = (struct reg_window *) fp; + regs = (struct pt_regs *) (rw + 1); + + if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) { + pc = regs->tpc; + fp = regs->u_regs[UREG_I6] + STACK_BIAS; + } else { + pc = rw->ins[7]; + fp = rw->ins[6] + STACK_BIAS; + } + if (trace->skip > 0) trace->skip--; else - trace->entries[trace->nr_entries++] = rw->ins[7]; - - fp = rw->ins[6] + STACK_BIAS; + trace->entries[trace->nr_entries++] = pc; } while (trace->nr_entries < trace->max_entries); } diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index fd9430562e0b..e1fbf8c75787 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -262,7 +262,7 @@ sun4v_iacc: mov %l5, %o2 call sun4v_insn_access_exception add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Instruction Access Exception, tl1. */ sun4v_iacc_tl1: @@ -278,7 +278,7 @@ sun4v_iacc_tl1: mov %l5, %o2 call sun4v_insn_access_exception_tl1 add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Data Access Exception, tl0. */ sun4v_dacc: @@ -294,7 +294,7 @@ sun4v_dacc: mov %l5, %o2 call sun4v_data_access_exception add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Data Access Exception, tl1. */ sun4v_dacc_tl1: @@ -310,7 +310,7 @@ sun4v_dacc_tl1: mov %l5, %o2 call sun4v_data_access_exception_tl1 add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Memory Address Unaligned. */ sun4v_mna: @@ -344,7 +344,7 @@ sun4v_mna: mov %l5, %o2 call sun4v_do_mna add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Privileged Action. */ sun4v_privact: @@ -352,7 +352,7 @@ sun4v_privact: rd %pc, %g7 call do_privact add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Unaligned ldd float, tl0. */ sun4v_lddfmna: @@ -368,7 +368,7 @@ sun4v_lddfmna: mov %l5, %o2 call handle_lddfmna add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap /* Unaligned std float, tl0. */ sun4v_stdfmna: @@ -384,7 +384,7 @@ sun4v_stdfmna: mov %l5, %o2 call handle_stdfmna add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap #define BRANCH_ALWAYS 0x10680000 #define NOP 0x01000000 diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 73ed01ba40dc..8d4761f15fa9 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -454,8 +454,8 @@ asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, err = sys_semget(first, (int)second, (int)third); goto out; case SEMCTL: { - err = sys_semctl(first, third, - (int)second | IPC_64, + err = sys_semctl(first, second, + (int)third | IPC_64, (union semun) ptr); goto out; } diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c index 52816c7be0b9..e885034a6b73 100644 --- a/arch/sparc64/kernel/sysfs.c +++ b/arch/sparc64/kernel/sysfs.c @@ -273,10 +273,22 @@ static void __init check_mmu_stats(void) mmu_stats_supported = 1; } +static void register_nodes(void) +{ +#ifdef CONFIG_NUMA + int i; + + for (i = 0; i < MAX_NUMNODES; i++) + register_one_node(i); +#endif +} + static int __init topology_init(void) { int cpu; + register_nodes(); + check_mmu_stats(); register_cpu_notifier(&sysfs_cpu_nb); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 96da847023f3..d9b8d46707d1 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2091,9 +2091,8 @@ static void user_instruction_dump(unsigned int __user *pc) void show_stack(struct task_struct *tsk, unsigned long *_ksp) { - unsigned long pc, fp, thread_base, ksp; + unsigned long fp, thread_base, ksp; struct thread_info *tp; - struct reg_window *rw; int count = 0; ksp = (unsigned long) _ksp; @@ -2117,15 +2116,27 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp) printk("\n"); #endif do { + struct reg_window *rw; + struct pt_regs *regs; + unsigned long pc; + /* Bogus frame pointer? */ if (fp < (thread_base + sizeof(struct thread_info)) || fp >= (thread_base + THREAD_SIZE)) break; rw = (struct reg_window *)fp; - pc = rw->ins[7]; + regs = (struct pt_regs *) (rw + 1); + + if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) { + pc = regs->tpc; + fp = regs->u_regs[UREG_I6] + STACK_BIAS; + } else { + pc = rw->ins[7]; + fp = rw->ins[6] + STACK_BIAS; + } + printk(" [%016lx] ", pc); print_symbol("%s\n", pc); - fp = rw->ins[6] + STACK_BIAS; } while (++count < 16); #ifndef CONFIG_KALLSYMS printk("\n"); diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 10adb2fb8ffe..c499214b501d 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -275,7 +275,7 @@ sparc64_realfault_common: stx %l5, [%g6 + TI_FAULT_ADDR] ! Save fault address call do_sparc64_fault ! Call fault handler add %sp, PTREGS_OFF, %o0 ! Compute pt_regs arg - ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state + ba,pt %xcc, rtrap ! Restore cpu state nop ! Delay slot (fill me) winfix_trampoline: diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index c4aa110a10e5..a6b0863c27df 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -32,7 +32,7 @@ fill_fixup: rd %pc, %g7 call do_sparc64_fault add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap_clr_l6 + ba,pt %xcc, rtrap nop /* Be very careful about usage of the trap globals here. @@ -100,7 +100,7 @@ spill_fixup_dax: rd %pc, %g7 call do_sparc64_fault add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap winfix_mna: andn %g3, 0x7f, %g3 @@ -122,12 +122,12 @@ fill_fixup_mna: mov %l4, %o2 call sun4v_do_mna mov %l5, %o1 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap 1: mov %l4, %o1 mov %l5, %o2 call mem_address_unaligned nop - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap winfix_dax: andn %g3, 0x7f, %g3 @@ -150,7 +150,7 @@ fill_fixup_dax: add %sp, PTREGS_OFF, %o0 call sun4v_data_access_exception nop - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap 1: call spitfire_data_access_exception nop - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index f37078d96407..177d8aaeec42 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -24,6 +24,8 @@ #include <linux/cache.h> #include <linux/sort.h> #include <linux/percpu.h> +#include <linux/lmb.h> +#include <linux/mmzone.h> #include <asm/head.h> #include <asm/system.h> @@ -72,9 +74,7 @@ extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; #define MAX_BANKS 32 static struct linux_prom64_registers pavail[MAX_BANKS] __initdata; -static struct linux_prom64_registers pavail_rescan[MAX_BANKS] __initdata; static int pavail_ents __initdata; -static int pavail_rescan_ents __initdata; static int cmp_p64(const void *a, const void *b) { @@ -715,285 +715,684 @@ out: smp_new_mmu_context_version(); } -/* Find a free area for the bootmem map, avoiding the kernel image - * and the initial ramdisk. - */ -static unsigned long __init choose_bootmap_pfn(unsigned long start_pfn, - unsigned long end_pfn) +static int numa_enabled = 1; +static int numa_debug; + +static int __init early_numa(char *p) { - unsigned long avoid_start, avoid_end, bootmap_size; - int i; + if (!p) + return 0; + + if (strstr(p, "off")) + numa_enabled = 0; + + if (strstr(p, "debug")) + numa_debug = 1; + + return 0; +} +early_param("numa", early_numa); - bootmap_size = bootmem_bootmap_pages(end_pfn - start_pfn); - bootmap_size <<= PAGE_SHIFT; +#define numadbg(f, a...) \ +do { if (numa_debug) \ + printk(KERN_INFO f, ## a); \ +} while (0) - avoid_start = avoid_end = 0; +static void __init find_ramdisk(unsigned long phys_base) +{ #ifdef CONFIG_BLK_DEV_INITRD - avoid_start = initrd_start; - avoid_end = PAGE_ALIGN(initrd_end); + if (sparc_ramdisk_image || sparc_ramdisk_image64) { + unsigned long ramdisk_image; + + /* Older versions of the bootloader only supported a + * 32-bit physical address for the ramdisk image + * location, stored at sparc_ramdisk_image. Newer + * SILO versions set sparc_ramdisk_image to zero and + * provide a full 64-bit physical address at + * sparc_ramdisk_image64. + */ + ramdisk_image = sparc_ramdisk_image; + if (!ramdisk_image) + ramdisk_image = sparc_ramdisk_image64; + + /* Another bootloader quirk. The bootloader normalizes + * the physical address to KERNBASE, so we have to + * factor that back out and add in the lowest valid + * physical page address to get the true physical address. + */ + ramdisk_image -= KERNBASE; + ramdisk_image += phys_base; + + numadbg("Found ramdisk at physical address 0x%lx, size %u\n", + ramdisk_image, sparc_ramdisk_size); + + initrd_start = ramdisk_image; + initrd_end = ramdisk_image + sparc_ramdisk_size; + + lmb_reserve(initrd_start, initrd_end); + } #endif +} - for (i = 0; i < pavail_ents; i++) { - unsigned long start, end; +struct node_mem_mask { + unsigned long mask; + unsigned long val; + unsigned long bootmem_paddr; +}; +static struct node_mem_mask node_masks[MAX_NUMNODES]; +static int num_node_masks; - start = pavail[i].phys_addr; - end = start + pavail[i].reg_size; +int numa_cpu_lookup_table[NR_CPUS]; +cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES]; - while (start < end) { - if (start >= kern_base && - start < PAGE_ALIGN(kern_base + kern_size)) { - start = PAGE_ALIGN(kern_base + kern_size); - continue; - } - if (start >= avoid_start && start < avoid_end) { - start = avoid_end; - continue; - } +#ifdef CONFIG_NEED_MULTIPLE_NODES +static bootmem_data_t plat_node_bdata[MAX_NUMNODES]; - if ((end - start) < bootmap_size) - break; +struct mdesc_mblock { + u64 base; + u64 size; + u64 offset; /* RA-to-PA */ +}; +static struct mdesc_mblock *mblocks; +static int num_mblocks; - if (start < kern_base && - (start + bootmap_size) > kern_base) { - start = PAGE_ALIGN(kern_base + kern_size); - continue; - } +static unsigned long ra_to_pa(unsigned long addr) +{ + int i; - if (start < avoid_start && - (start + bootmap_size) > avoid_start) { - start = avoid_end; - continue; - } + for (i = 0; i < num_mblocks; i++) { + struct mdesc_mblock *m = &mblocks[i]; - /* OK, it doesn't overlap anything, use it. */ - return start >> PAGE_SHIFT; + if (addr >= m->base && + addr < (m->base + m->size)) { + addr += m->offset; + break; } } - - prom_printf("Cannot find free area for bootmap, aborting.\n"); - prom_halt(); + return addr; } -static void __init trim_pavail(unsigned long *cur_size_p, - unsigned long *end_of_phys_p) +static int find_node(unsigned long addr) { - unsigned long to_trim = *cur_size_p - cmdline_memory_size; - unsigned long avoid_start, avoid_end; int i; - to_trim = PAGE_ALIGN(to_trim); + addr = ra_to_pa(addr); + for (i = 0; i < num_node_masks; i++) { + struct node_mem_mask *p = &node_masks[i]; - avoid_start = avoid_end = 0; -#ifdef CONFIG_BLK_DEV_INITRD - avoid_start = initrd_start; - avoid_end = PAGE_ALIGN(initrd_end); + if ((addr & p->mask) == p->val) + return i; + } + return -1; +} + +static unsigned long nid_range(unsigned long start, unsigned long end, + int *nid) +{ + *nid = find_node(start); + start += PAGE_SIZE; + while (start < end) { + int n = find_node(start); + + if (n != *nid) + break; + start += PAGE_SIZE; + } + + return start; +} +#else +static unsigned long nid_range(unsigned long start, unsigned long end, + int *nid) +{ + *nid = 0; + return end; +} #endif - /* Trim some pavail[] entries in order to satisfy the - * requested "mem=xxx" kernel command line specification. - * - * We must not trim off the kernel image area nor the - * initial ramdisk range (if any). Also, we must not trim - * any pavail[] entry down to zero in order to preserve - * the invariant that all pavail[] entries have a non-zero - * size which is assumed by all of the code in here. - */ - for (i = 0; i < pavail_ents; i++) { - unsigned long start, end, kern_end; - unsigned long trim_low, trim_high, n; +/* This must be invoked after performing all of the necessary + * add_active_range() calls for 'nid'. We need to be able to get + * correct data from get_pfn_range_for_nid(). + */ +static void __init allocate_node_data(int nid) +{ + unsigned long paddr, num_pages, start_pfn, end_pfn; + struct pglist_data *p; + +#ifdef CONFIG_NEED_MULTIPLE_NODES + paddr = lmb_alloc_nid(sizeof(struct pglist_data), + SMP_CACHE_BYTES, nid, nid_range); + if (!paddr) { + prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid); + prom_halt(); + } + NODE_DATA(nid) = __va(paddr); + memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); - kern_end = PAGE_ALIGN(kern_base + kern_size); + NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; +#endif - trim_low = start = pavail[i].phys_addr; - trim_high = end = start + pavail[i].reg_size; + p = NODE_DATA(nid); - if (kern_base >= start && - kern_base < end) { - trim_low = kern_base; - if (kern_end >= end) - continue; - } - if (kern_end >= start && - kern_end < end) { - trim_high = kern_end; - } - if (avoid_start && - avoid_start >= start && - avoid_start < end) { - if (trim_low > avoid_start) - trim_low = avoid_start; - if (avoid_end >= end) - continue; - } - if (avoid_end && - avoid_end >= start && - avoid_end < end) { - if (trim_high < avoid_end) - trim_high = avoid_end; + get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); + p->node_start_pfn = start_pfn; + p->node_spanned_pages = end_pfn - start_pfn; + + if (p->node_spanned_pages) { + num_pages = bootmem_bootmap_pages(p->node_spanned_pages); + + paddr = lmb_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid, + nid_range); + if (!paddr) { + prom_printf("Cannot allocate bootmap for nid[%d]\n", + nid); + prom_halt(); } + node_masks[nid].bootmem_paddr = paddr; + } +} + +static void init_node_masks_nonnuma(void) +{ + int i; + + numadbg("Initializing tables for non-numa.\n"); + + node_masks[0].mask = node_masks[0].val = 0; + num_node_masks = 1; + + for (i = 0; i < NR_CPUS; i++) + numa_cpu_lookup_table[i] = 0; + + numa_cpumask_lookup_table[0] = CPU_MASK_ALL; +} + +#ifdef CONFIG_NEED_MULTIPLE_NODES +struct pglist_data *node_data[MAX_NUMNODES]; + +EXPORT_SYMBOL(numa_cpu_lookup_table); +EXPORT_SYMBOL(numa_cpumask_lookup_table); +EXPORT_SYMBOL(node_data); + +struct mdesc_mlgroup { + u64 node; + u64 latency; + u64 match; + u64 mask; +}; +static struct mdesc_mlgroup *mlgroups; +static int num_mlgroups; + +static int scan_pio_for_cfg_handle(struct mdesc_handle *md, u64 pio, + u32 cfg_handle) +{ + u64 arc; - if (trim_high <= trim_low) + mdesc_for_each_arc(arc, md, pio, MDESC_ARC_TYPE_FWD) { + u64 target = mdesc_arc_target(md, arc); + const u64 *val; + + val = mdesc_get_property(md, target, + "cfg-handle", NULL); + if (val && *val == cfg_handle) + return 0; + } + return -ENODEV; +} + +static int scan_arcs_for_cfg_handle(struct mdesc_handle *md, u64 grp, + u32 cfg_handle) +{ + u64 arc, candidate, best_latency = ~(u64)0; + + candidate = MDESC_NODE_NULL; + mdesc_for_each_arc(arc, md, grp, MDESC_ARC_TYPE_FWD) { + u64 target = mdesc_arc_target(md, arc); + const char *name = mdesc_node_name(md, target); + const u64 *val; + + if (strcmp(name, "pio-latency-group")) continue; - if (trim_low == start && trim_high == end) { - /* Whole chunk is available for trimming. - * Trim all except one page, in order to keep - * entry non-empty. - */ - n = (end - start) - PAGE_SIZE; - if (n > to_trim) - n = to_trim; - - if (n) { - pavail[i].phys_addr += n; - pavail[i].reg_size -= n; - to_trim -= n; - } - } else { - n = (trim_low - start); - if (n > to_trim) - n = to_trim; - - if (n) { - pavail[i].phys_addr += n; - pavail[i].reg_size -= n; - to_trim -= n; - } - if (to_trim) { - n = end - trim_high; - if (n > to_trim) - n = to_trim; - if (n) { - pavail[i].reg_size -= n; - to_trim -= n; - } - } + val = mdesc_get_property(md, target, "latency", NULL); + if (!val) + continue; + + if (*val < best_latency) { + candidate = target; + best_latency = *val; } + } + + if (candidate == MDESC_NODE_NULL) + return -ENODEV; + + return scan_pio_for_cfg_handle(md, candidate, cfg_handle); +} + +int of_node_to_nid(struct device_node *dp) +{ + const struct linux_prom64_registers *regs; + struct mdesc_handle *md; + u32 cfg_handle; + int count, nid; + u64 grp; - if (!to_trim) + if (!mlgroups) + return -1; + + regs = of_get_property(dp, "reg", NULL); + if (!regs) + return -1; + + cfg_handle = (regs->phys_addr >> 32UL) & 0x0fffffff; + + md = mdesc_grab(); + + count = 0; + nid = -1; + mdesc_for_each_node_by_name(md, grp, "group") { + if (!scan_arcs_for_cfg_handle(md, grp, cfg_handle)) { + nid = count; break; + } + count++; } - /* Recalculate. */ - *cur_size_p = 0UL; - for (i = 0; i < pavail_ents; i++) { - *end_of_phys_p = pavail[i].phys_addr + - pavail[i].reg_size; - *cur_size_p += pavail[i].reg_size; - } + mdesc_release(md); + + return nid; } -/* About pages_avail, this is the value we will use to calculate - * the zholes_size[] argument given to free_area_init_node(). The - * page allocator uses this to calculate nr_kernel_pages, - * nr_all_pages and zone->present_pages. On NUMA it is used - * to calculate zone->min_unmapped_pages and zone->min_slab_pages. - * - * So this number should really be set to what the page allocator - * actually ends up with. This means: - * 1) It should include bootmem map pages, we'll release those. - * 2) It should not include the kernel image, except for the - * __init sections which we will also release. - * 3) It should include the initrd image, since we'll release - * that too. - */ -static unsigned long __init bootmem_init(unsigned long *pages_avail, - unsigned long phys_base) +static void add_node_ranges(void) { - unsigned long bootmap_size, end_pfn; - unsigned long end_of_phys_memory = 0UL; - unsigned long bootmap_pfn, bytes_avail, size; int i; - bytes_avail = 0UL; - for (i = 0; i < pavail_ents; i++) { - end_of_phys_memory = pavail[i].phys_addr + - pavail[i].reg_size; - bytes_avail += pavail[i].reg_size; + for (i = 0; i < lmb.memory.cnt; i++) { + unsigned long size = lmb_size_bytes(&lmb.memory, i); + unsigned long start, end; + + start = lmb.memory.region[i].base; + end = start + size; + while (start < end) { + unsigned long this_end; + int nid; + + this_end = nid_range(start, end, &nid); + + numadbg("Adding active range nid[%d] " + "start[%lx] end[%lx]\n", + nid, start, this_end); + + add_active_range(nid, + start >> PAGE_SHIFT, + this_end >> PAGE_SHIFT); + + start = this_end; + } } +} - /* Determine the location of the initial ramdisk before trying - * to honor the "mem=xxx" command line argument. We must know - * where the kernel image and the ramdisk image are so that we - * do not trim those two areas from the physical memory map. - */ +static int __init grab_mlgroups(struct mdesc_handle *md) +{ + unsigned long paddr; + int count = 0; + u64 node; + + mdesc_for_each_node_by_name(md, node, "memory-latency-group") + count++; + if (!count) + return -ENOENT; + + paddr = lmb_alloc(count * sizeof(struct mdesc_mlgroup), + SMP_CACHE_BYTES); + if (!paddr) + return -ENOMEM; + + mlgroups = __va(paddr); + num_mlgroups = count; + + count = 0; + mdesc_for_each_node_by_name(md, node, "memory-latency-group") { + struct mdesc_mlgroup *m = &mlgroups[count++]; + const u64 *val; + + m->node = node; + + val = mdesc_get_property(md, node, "latency", NULL); + m->latency = *val; + val = mdesc_get_property(md, node, "address-match", NULL); + m->match = *val; + val = mdesc_get_property(md, node, "address-mask", NULL); + m->mask = *val; + + numadbg("MLGROUP[%d]: node[%lx] latency[%lx] " + "match[%lx] mask[%lx]\n", + count - 1, m->node, m->latency, m->match, m->mask); + } -#ifdef CONFIG_BLK_DEV_INITRD - /* Now have to check initial ramdisk, so that bootmap does not overwrite it */ - if (sparc_ramdisk_image || sparc_ramdisk_image64) { - unsigned long ramdisk_image = sparc_ramdisk_image ? - sparc_ramdisk_image : sparc_ramdisk_image64; - ramdisk_image -= KERNBASE; - initrd_start = ramdisk_image + phys_base; - initrd_end = initrd_start + sparc_ramdisk_size; - if (initrd_end > end_of_phys_memory) { - printk(KERN_CRIT "initrd extends beyond end of memory " - "(0x%016lx > 0x%016lx)\ndisabling initrd\n", - initrd_end, end_of_phys_memory); - initrd_start = 0; - initrd_end = 0; + return 0; +} + +static int __init grab_mblocks(struct mdesc_handle *md) +{ + unsigned long paddr; + int count = 0; + u64 node; + + mdesc_for_each_node_by_name(md, node, "mblock") + count++; + if (!count) + return -ENOENT; + + paddr = lmb_alloc(count * sizeof(struct mdesc_mblock), + SMP_CACHE_BYTES); + if (!paddr) + return -ENOMEM; + + mblocks = __va(paddr); + num_mblocks = count; + + count = 0; + mdesc_for_each_node_by_name(md, node, "mblock") { + struct mdesc_mblock *m = &mblocks[count++]; + const u64 *val; + + val = mdesc_get_property(md, node, "base", NULL); + m->base = *val; + val = mdesc_get_property(md, node, "size", NULL); + m->size = *val; + val = mdesc_get_property(md, node, + "address-congruence-offset", NULL); + m->offset = *val; + + numadbg("MBLOCK[%d]: base[%lx] size[%lx] offset[%lx]\n", + count - 1, m->base, m->size, m->offset); + } + + return 0; +} + +static void __init numa_parse_mdesc_group_cpus(struct mdesc_handle *md, + u64 grp, cpumask_t *mask) +{ + u64 arc; + + cpus_clear(*mask); + + mdesc_for_each_arc(arc, md, grp, MDESC_ARC_TYPE_BACK) { + u64 target = mdesc_arc_target(md, arc); + const char *name = mdesc_node_name(md, target); + const u64 *id; + + if (strcmp(name, "cpu")) + continue; + id = mdesc_get_property(md, target, "id", NULL); + if (*id < NR_CPUS) + cpu_set(*id, *mask); + } +} + +static struct mdesc_mlgroup * __init find_mlgroup(u64 node) +{ + int i; + + for (i = 0; i < num_mlgroups; i++) { + struct mdesc_mlgroup *m = &mlgroups[i]; + if (m->node == node) + return m; + } + return NULL; +} + +static int __init numa_attach_mlgroup(struct mdesc_handle *md, u64 grp, + int index) +{ + struct mdesc_mlgroup *candidate = NULL; + u64 arc, best_latency = ~(u64)0; + struct node_mem_mask *n; + + mdesc_for_each_arc(arc, md, grp, MDESC_ARC_TYPE_FWD) { + u64 target = mdesc_arc_target(md, arc); + struct mdesc_mlgroup *m = find_mlgroup(target); + if (!m) + continue; + if (m->latency < best_latency) { + candidate = m; + best_latency = m->latency; } } -#endif + if (!candidate) + return -ENOENT; + + if (num_node_masks != index) { + printk(KERN_ERR "Inconsistent NUMA state, " + "index[%d] != num_node_masks[%d]\n", + index, num_node_masks); + return -EINVAL; + } - if (cmdline_memory_size && - bytes_avail > cmdline_memory_size) - trim_pavail(&bytes_avail, - &end_of_phys_memory); + n = &node_masks[num_node_masks++]; - *pages_avail = bytes_avail >> PAGE_SHIFT; + n->mask = candidate->mask; + n->val = candidate->match; - end_pfn = end_of_phys_memory >> PAGE_SHIFT; + numadbg("NUMA NODE[%d]: mask[%lx] val[%lx] (latency[%lx])\n", + index, n->mask, n->val, candidate->latency); - /* Initialize the boot-time allocator. */ - max_pfn = max_low_pfn = end_pfn; - min_low_pfn = (phys_base >> PAGE_SHIFT); + return 0; +} + +static int __init numa_parse_mdesc_group(struct mdesc_handle *md, u64 grp, + int index) +{ + cpumask_t mask; + int cpu; - bootmap_pfn = choose_bootmap_pfn(min_low_pfn, end_pfn); + numa_parse_mdesc_group_cpus(md, grp, &mask); - bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, - min_low_pfn, end_pfn); + for_each_cpu_mask(cpu, mask) + numa_cpu_lookup_table[cpu] = index; + numa_cpumask_lookup_table[index] = mask; - /* Now register the available physical memory with the - * allocator. - */ - for (i = 0; i < pavail_ents; i++) - free_bootmem(pavail[i].phys_addr, pavail[i].reg_size); + if (numa_debug) { + printk(KERN_INFO "NUMA GROUP[%d]: cpus [ ", index); + for_each_cpu_mask(cpu, mask) + printk("%d ", cpu); + printk("]\n"); + } -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) { - size = initrd_end - initrd_start; + return numa_attach_mlgroup(md, grp, index); +} + +static int __init numa_parse_mdesc(void) +{ + struct mdesc_handle *md = mdesc_grab(); + int i, err, count; + u64 node; + + node = mdesc_node_by_name(md, MDESC_NODE_NULL, "latency-groups"); + if (node == MDESC_NODE_NULL) { + mdesc_release(md); + return -ENOENT; + } + + err = grab_mblocks(md); + if (err < 0) + goto out; + + err = grab_mlgroups(md); + if (err < 0) + goto out; + + count = 0; + mdesc_for_each_node_by_name(md, node, "group") { + err = numa_parse_mdesc_group(md, node, count); + if (err < 0) + break; + count++; + } + + add_node_ranges(); + + for (i = 0; i < num_node_masks; i++) { + allocate_node_data(i); + node_set_online(i); + } + + err = 0; +out: + mdesc_release(md); + return err; +} + +static int __init numa_parse_sun4u(void) +{ + return -1; +} - /* Reserve the initrd image area. */ - reserve_bootmem(initrd_start, size, BOOTMEM_DEFAULT); +static int __init bootmem_init_numa(void) +{ + int err = -1; - initrd_start += PAGE_OFFSET; - initrd_end += PAGE_OFFSET; + numadbg("bootmem_init_numa()\n"); + + if (numa_enabled) { + if (tlb_type == hypervisor) + err = numa_parse_mdesc(); + else + err = numa_parse_sun4u(); } + return err; +} + +#else + +static int bootmem_init_numa(void) +{ + return -1; +} + #endif - /* Reserve the kernel text/data/bss. */ - reserve_bootmem(kern_base, kern_size, BOOTMEM_DEFAULT); - *pages_avail -= PAGE_ALIGN(kern_size) >> PAGE_SHIFT; - - /* Add back in the initmem pages. */ - size = ((unsigned long)(__init_end) & PAGE_MASK) - - PAGE_ALIGN((unsigned long)__init_begin); - *pages_avail += size >> PAGE_SHIFT; - - /* Reserve the bootmem map. We do not account for it - * in pages_avail because we will release that memory - * in free_all_bootmem. - */ - size = bootmap_size; - reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT); - for (i = 0; i < pavail_ents; i++) { +static void __init bootmem_init_nonnuma(void) +{ + unsigned long top_of_ram = lmb_end_of_DRAM(); + unsigned long total_ram = lmb_phys_mem_size(); + unsigned int i; + + numadbg("bootmem_init_nonnuma()\n"); + + printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", + top_of_ram, total_ram); + printk(KERN_INFO "Memory hole size: %ldMB\n", + (top_of_ram - total_ram) >> 20); + + init_node_masks_nonnuma(); + + for (i = 0; i < lmb.memory.cnt; i++) { + unsigned long size = lmb_size_bytes(&lmb.memory, i); unsigned long start_pfn, end_pfn; - start_pfn = pavail[i].phys_addr >> PAGE_SHIFT; - end_pfn = (start_pfn + (pavail[i].reg_size >> PAGE_SHIFT)); - memory_present(0, start_pfn, end_pfn); + if (!size) + continue; + + start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT; + end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i); + add_active_range(0, start_pfn, end_pfn); + } + + allocate_node_data(0); + + node_set_online(0); +} + +static void __init reserve_range_in_node(int nid, unsigned long start, + unsigned long end) +{ + numadbg(" reserve_range_in_node(nid[%d],start[%lx],end[%lx]\n", + nid, start, end); + while (start < end) { + unsigned long this_end; + int n; + + this_end = nid_range(start, end, &n); + if (n == nid) { + numadbg(" MATCH reserving range [%lx:%lx]\n", + start, this_end); + reserve_bootmem_node(NODE_DATA(nid), start, + (this_end - start), BOOTMEM_DEFAULT); + } else + numadbg(" NO MATCH, advancing start to %lx\n", + this_end); + + start = this_end; + } +} + +static void __init trim_reserved_in_node(int nid) +{ + int i; + + numadbg(" trim_reserved_in_node(%d)\n", nid); + + for (i = 0; i < lmb.reserved.cnt; i++) { + unsigned long start = lmb.reserved.region[i].base; + unsigned long size = lmb_size_bytes(&lmb.reserved, i); + unsigned long end = start + size; + + reserve_range_in_node(nid, start, end); + } +} + +static void __init bootmem_init_one_node(int nid) +{ + struct pglist_data *p; + + numadbg("bootmem_init_one_node(%d)\n", nid); + + p = NODE_DATA(nid); + + if (p->node_spanned_pages) { + unsigned long paddr = node_masks[nid].bootmem_paddr; + unsigned long end_pfn; + + end_pfn = p->node_start_pfn + p->node_spanned_pages; + + numadbg(" init_bootmem_node(%d, %lx, %lx, %lx)\n", + nid, paddr >> PAGE_SHIFT, p->node_start_pfn, end_pfn); + + init_bootmem_node(p, paddr >> PAGE_SHIFT, + p->node_start_pfn, end_pfn); + + numadbg(" free_bootmem_with_active_regions(%d, %lx)\n", + nid, end_pfn); + free_bootmem_with_active_regions(nid, end_pfn); + + trim_reserved_in_node(nid); + + numadbg(" sparse_memory_present_with_active_regions(%d)\n", + nid); + sparse_memory_present_with_active_regions(nid); } +} + +static unsigned long __init bootmem_init(unsigned long phys_base) +{ + unsigned long end_pfn; + int nid; + + end_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT; + max_pfn = max_low_pfn = end_pfn; + min_low_pfn = (phys_base >> PAGE_SHIFT); + + if (bootmem_init_numa() < 0) + bootmem_init_nonnuma(); + + /* XXX cpu notifier XXX */ + + for_each_online_node(nid) + bootmem_init_one_node(nid); sparse_init(); @@ -1289,7 +1688,7 @@ void __init setup_per_cpu_areas(void) void __init paging_init(void) { - unsigned long end_pfn, pages_avail, shift, phys_base; + unsigned long end_pfn, shift, phys_base; unsigned long real_end, i; /* These build time checkes make sure that the dcache_dirty_cpu() @@ -1330,12 +1729,26 @@ void __init paging_init(void) sun4v_ktsb_init(); } + lmb_init(); + /* Find available physical memory... */ read_obp_memory("available", &pavail[0], &pavail_ents); phys_base = 0xffffffffffffffffUL; - for (i = 0; i < pavail_ents; i++) + for (i = 0; i < pavail_ents; i++) { phys_base = min(phys_base, pavail[i].phys_addr); + lmb_add(pavail[i].phys_addr, pavail[i].reg_size); + } + + lmb_reserve(kern_base, kern_size); + + find_ramdisk(phys_base); + + if (cmdline_memory_size) + lmb_enforce_memory_limit(phys_base + cmdline_memory_size); + + lmb_analyze(); + lmb_dump_all(); set_bit(0, mmu_context_bmap); @@ -1371,14 +1784,10 @@ void __init paging_init(void) if (tlb_type == hypervisor) sun4v_ktsb_register(); - /* Setup bootmem... */ - pages_avail = 0; - last_valid_pfn = end_pfn = bootmem_init(&pages_avail, phys_base); - - max_mapnr = last_valid_pfn; - - kernel_physical_mapping_init(); - + /* We must setup the per-cpu areas before we pull in the + * PROM and the MDESC. The code there fills in cpu and + * other information into per-cpu data structures. + */ real_setup_per_cpu_areas(); prom_build_devicetree(); @@ -1386,20 +1795,22 @@ void __init paging_init(void) if (tlb_type == hypervisor) sun4v_mdesc_init(); + /* Setup bootmem... */ + last_valid_pfn = end_pfn = bootmem_init(phys_base); + +#ifndef CONFIG_NEED_MULTIPLE_NODES + max_mapnr = last_valid_pfn; +#endif + kernel_physical_mapping_init(); + { - unsigned long zones_size[MAX_NR_ZONES]; - unsigned long zholes_size[MAX_NR_ZONES]; - int znum; + unsigned long max_zone_pfns[MAX_NR_ZONES]; - for (znum = 0; znum < MAX_NR_ZONES; znum++) - zones_size[znum] = zholes_size[znum] = 0; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - zones_size[ZONE_NORMAL] = end_pfn; - zholes_size[ZONE_NORMAL] = end_pfn - pages_avail; + max_zone_pfns[ZONE_NORMAL] = end_pfn; - free_area_init_node(0, &contig_page_data, zones_size, - __pa(PAGE_OFFSET) >> PAGE_SHIFT, - zholes_size); + free_area_init_nodes(max_zone_pfns); } printk("Booting Linux...\n"); @@ -1408,21 +1819,52 @@ void __init paging_init(void) cpu_probe(); } -static void __init taint_real_pages(void) +int __init page_in_phys_avail(unsigned long paddr) +{ + int i; + + paddr &= PAGE_MASK; + + for (i = 0; i < pavail_ents; i++) { + unsigned long start, end; + + start = pavail[i].phys_addr; + end = start + pavail[i].reg_size; + + if (paddr >= start && paddr < end) + return 1; + } + if (paddr >= kern_base && paddr < (kern_base + kern_size)) + return 1; +#ifdef CONFIG_BLK_DEV_INITRD + if (paddr >= __pa(initrd_start) && + paddr < __pa(PAGE_ALIGN(initrd_end))) + return 1; +#endif + + return 0; +} + +static struct linux_prom64_registers pavail_rescan[MAX_BANKS] __initdata; +static int pavail_rescan_ents __initdata; + +/* Certain OBP calls, such as fetching "available" properties, can + * claim physical memory. So, along with initializing the valid + * address bitmap, what we do here is refetch the physical available + * memory list again, and make sure it provides at least as much + * memory as 'pavail' does. + */ +static void setup_valid_addr_bitmap_from_pavail(void) { int i; read_obp_memory("available", &pavail_rescan[0], &pavail_rescan_ents); - /* Find changes discovered in the physmem available rescan and - * reserve the lost portions in the bootmem maps. - */ for (i = 0; i < pavail_ents; i++) { unsigned long old_start, old_end; old_start = pavail[i].phys_addr; - old_end = old_start + - pavail[i].reg_size; + old_end = old_start + pavail[i].reg_size; while (old_start < old_end) { int n; @@ -1440,7 +1882,16 @@ static void __init taint_real_pages(void) goto do_next_page; } } - reserve_bootmem(old_start, PAGE_SIZE, BOOTMEM_DEFAULT); + + prom_printf("mem_init: Lost memory in pavail\n"); + prom_printf("mem_init: OLD start[%lx] size[%lx]\n", + pavail[i].phys_addr, + pavail[i].reg_size); + prom_printf("mem_init: NEW start[%lx] size[%lx]\n", + pavail_rescan[i].phys_addr, + pavail_rescan[i].reg_size); + prom_printf("mem_init: Cannot continue, aborting.\n"); + prom_halt(); do_next_page: old_start += PAGE_SIZE; @@ -1448,32 +1899,6 @@ static void __init taint_real_pages(void) } } -int __init page_in_phys_avail(unsigned long paddr) -{ - int i; - - paddr &= PAGE_MASK; - - for (i = 0; i < pavail_rescan_ents; i++) { - unsigned long start, end; - - start = pavail_rescan[i].phys_addr; - end = start + pavail_rescan[i].reg_size; - - if (paddr >= start && paddr < end) - return 1; - } - if (paddr >= kern_base && paddr < (kern_base + kern_size)) - return 1; -#ifdef CONFIG_BLK_DEV_INITRD - if (paddr >= __pa(initrd_start) && - paddr < __pa(PAGE_ALIGN(initrd_end))) - return 1; -#endif - - return 0; -} - void __init mem_init(void) { unsigned long codepages, datapages, initpages; @@ -1496,14 +1921,26 @@ void __init mem_init(void) addr += PAGE_SIZE; } - taint_real_pages(); + setup_valid_addr_bitmap_from_pavail(); high_memory = __va(last_valid_pfn << PAGE_SHIFT); +#ifdef CONFIG_NEED_MULTIPLE_NODES + for_each_online_node(i) { + if (NODE_DATA(i)->node_spanned_pages != 0) { + totalram_pages += + free_all_bootmem_node(NODE_DATA(i)); + } + } +#else + totalram_pages = free_all_bootmem(); +#endif + /* We subtract one to account for the mem_map_zero page * allocated below. */ - totalram_pages = num_physpages = free_all_bootmem() - 1; + totalram_pages -= 1; + num_physpages = totalram_pages; /* * Set up the zero page, mark it reserved, so that page count diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index a3e6e4b635b3..fe70c8a557b5 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -321,7 +321,8 @@ retry_tsb_alloc: if (new_size > (PAGE_SIZE * 2)) gfp_flags = __GFP_NOWARN | __GFP_NORETRY; - new_tsb = kmem_cache_alloc(tsb_caches[new_cache_index], gfp_flags); + new_tsb = kmem_cache_alloc_node(tsb_caches[new_cache_index], + gfp_flags, numa_node_id()); if (unlikely(!new_tsb)) { /* Not being able to fork due to a high-order TSB * allocation failure is very bad behavior. Just back diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 2865c105b6a4..e686a67561af 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -476,7 +476,6 @@ xcall_sync_tick: #endif call smp_synchronize_tick_client nop - clr %l6 b rtrap_xcall ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 @@ -511,7 +510,6 @@ xcall_report_regs: #endif call __show_regs add %sp, PTREGS_OFF, %o0 - clr %l6 /* Has to be a non-v9 branch due to the large distance. */ b rtrap_xcall ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 @@ -576,7 +574,7 @@ __hypervisor_tlb_xcall_error: mov %l4, %o0 call hypervisor_tlbop_error_xcall mov %l5, %o1 - ba,a,pt %xcc, rtrap_clr_l6 + ba,a,pt %xcc, rtrap .globl __hypervisor_xcall_flush_tlb_mm __hypervisor_xcall_flush_tlb_mm: /* 21 insns */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 87a693cf2bb7..4d350b5cbc71 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -23,7 +23,7 @@ config X86 select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) - select HAVE_ARCH_KGDB + select HAVE_ARCH_KGDB if !X86_VOYAGER config GENERIC_LOCKBREAK diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 610aaecc19f8..239fd9fba0a5 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -5,6 +5,17 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" +config NONPROMISC_DEVMEM + bool "Disable promiscuous /dev/mem" + help + The /dev/mem file by default only allows userspace access to PCI + space and the BIOS code and data regions. This is sufficient for + dosemu and X and all common users of /dev/mem. With this config + option, you allow userspace access to all of memory, including + kernel and userspace memory. Accidental access to this is + obviously disasterous, but specific access can be used by people + debugging the kernel. + config EARLY_PRINTK bool "Early printk" if EMBEDDED default y diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore index b1bdc4c6f9f2..172cf8a98bdd 100644 --- a/arch/x86/boot/.gitignore +++ b/arch/x86/boot/.gitignore @@ -1,7 +1,8 @@ bootsect bzImage +cpustr.h +mkcpustr +offsets.h setup setup.bin setup.elf -cpustr.h -mkcpustr diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/kernel/acpi/realmode/.gitignore new file mode 100644 index 000000000000..58f1f48a58f8 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/.gitignore @@ -0,0 +1,3 @@ +wakeup.bin +wakeup.elf +wakeup.lds diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index df4099dc1c68..65c7857a90dd 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -511,31 +511,30 @@ void *__kprobes text_poke(void *addr, const void *opcode, size_t len) unsigned long flags; char *vaddr; int nr_pages = 2; + struct page *pages[2]; + int i; - BUG_ON(len > sizeof(long)); - BUG_ON((((long)addr + len - 1) & ~(sizeof(long) - 1)) - - ((long)addr & ~(sizeof(long) - 1))); - if (kernel_text_address((unsigned long)addr)) { - struct page *pages[2] = { virt_to_page(addr), - virt_to_page(addr + PAGE_SIZE) }; - if (!pages[1]) - nr_pages = 1; - vaddr = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL); - BUG_ON(!vaddr); - local_irq_save(flags); - memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len); - local_irq_restore(flags); - vunmap(vaddr); + if (!core_kernel_text((unsigned long)addr)) { + pages[0] = vmalloc_to_page(addr); + pages[1] = vmalloc_to_page(addr + PAGE_SIZE); } else { - /* - * modules are in vmalloc'ed memory, always writable. - */ - local_irq_save(flags); - memcpy(addr, opcode, len); - local_irq_restore(flags); + pages[0] = virt_to_page(addr); + WARN_ON(!PageReserved(pages[0])); + pages[1] = virt_to_page(addr + PAGE_SIZE); } + BUG_ON(!pages[0]); + if (!pages[1]) + nr_pages = 1; + vaddr = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL); + BUG_ON(!vaddr); + local_irq_save(flags); + memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len); + local_irq_restore(flags); + vunmap(vaddr); sync_core(); /* Could also do a CLFLUSH here to speed up CPU recovery; but that causes hangs on some VIA CPUs. */ + for (i = 0; i < len; i++) + BUG_ON(((char *)addr)[i] != ((char *)opcode)[i]); return addr; } diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 687208190b06..8317401170b8 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -902,7 +902,7 @@ void __init init_bsp_APIC(void) apic_write_around(APIC_LVT1, value); } -void __cpuinit lapic_setup_esr(void) +static void __cpuinit lapic_setup_esr(void) { unsigned long oldvalue, value, maxlvt; if (lapic_is_integrated() && !esr_disable) { diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 9e8e5c050c55..bf83157337e4 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -429,7 +429,7 @@ void __init setup_boot_APIC_clock(void) * set the DUMMY flag again and force the broadcast mode in the * clockevents layer. */ -void __cpuinit check_boot_apic_timer_broadcast(void) +static void __cpuinit check_boot_apic_timer_broadcast(void) { if (!disable_apic_timer || (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) @@ -834,7 +834,7 @@ void __cpuinit setup_local_APIC(void) preempt_enable(); } -void __cpuinit lapic_setup_esr(void) +static void __cpuinit lapic_setup_esr(void) { unsigned maxlvt = lapic_get_maxlvt(); diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index f0f8934fc303..2a609dc3271c 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -409,7 +409,7 @@ restore_nocheck_notrace: irq_return: INTERRUPT_RETURN .section .fixup,"ax" -iret_exc: +ENTRY(iret_exc) pushl $0 # no error code pushl $do_iret_error jmp error_code @@ -1017,6 +1017,13 @@ ENTRY(kernel_thread_helper) ENDPROC(kernel_thread_helper) #ifdef CONFIG_XEN +/* Xen doesn't set %esp to be precisely what the normal sysenter + entrypoint expects, so fix it up before using the normal path. */ +ENTRY(xen_sysenter_target) + RING0_INT_FRAME + addl $5*4, %esp /* remove xen-provided frame */ + jmp sysenter_past_esp + ENTRY(xen_hypervisor_callback) CFI_STARTPROC pushl $0 @@ -1035,8 +1042,9 @@ ENTRY(xen_hypervisor_callback) cmpl $xen_iret_end_crit,%eax jae 1f - call xen_iret_crit_fixup + jmp xen_iret_crit_fixup +ENTRY(xen_do_upcall) 1: mov %esp, %eax call xen_evtchn_do_upcall jmp ret_from_intr diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 3733412d1357..74f0c5ea2a03 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -366,11 +366,13 @@ struct pv_mmu_ops pv_mmu_ops = { .flush_tlb_single = native_flush_tlb_single, .flush_tlb_others = native_flush_tlb_others, - .alloc_pt = paravirt_nop, - .alloc_pd = paravirt_nop, - .alloc_pd_clone = paravirt_nop, - .release_pt = paravirt_nop, - .release_pd = paravirt_nop, + .alloc_pte = paravirt_nop, + .alloc_pmd = paravirt_nop, + .alloc_pmd_clone = paravirt_nop, + .alloc_pud = paravirt_nop, + .release_pte = paravirt_nop, + .release_pmd = paravirt_nop, + .release_pud = paravirt_nop, .set_pte = native_set_pte, .set_pte_at = native_set_pte_at, diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 7adad088e373..77de848bd1fb 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -550,7 +550,7 @@ static void hard_enable_TSC(void) write_cr4(read_cr4() & ~X86_CR4_TSD); } -void enable_TSC(void) +static void enable_TSC(void) { preempt_disable(); if (test_and_clear_thread_flag(TIF_NOTSC)) diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 891af1a1b48a..131c2ee7ac56 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -562,7 +562,7 @@ static void hard_enable_TSC(void) write_cr4(read_cr4() & ~X86_CR4_TSD); } -void enable_TSC(void) +static void enable_TSC(void) { preempt_disable(); if (test_and_clear_thread_flag(TIF_NOTSC)) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 19c9386ac118..1791a751a772 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -8,6 +8,7 @@ #include <asm/apic.h> #include <asm/desc.h> #include <asm/hpet.h> +#include <asm/pgtable.h> #include <asm/reboot_fixups.h> #include <asm/reboot.h> @@ -15,7 +16,6 @@ # include <linux/dmi.h> # include <linux/ctype.h> # include <linux/mc146818rtc.h> -# include <asm/pgtable.h> #else # include <asm/iommu.h> #endif @@ -275,7 +275,7 @@ void machine_real_restart(unsigned char *code, int length) /* Remap the kernel at virtual address zero, as well as offset zero from the kernel segment. This assumes the kernel segment starts at virtual address PAGE_OFFSET. */ - memcpy(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, + memcpy(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY, sizeof(swapper_pg_dir [0]) * KERNEL_PGD_PTRS); /* diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 0d1f44ae6eea..c0c68c18a788 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -18,8 +18,6 @@ unsigned disabled_cpus __cpuinitdata; unsigned int boot_cpu_physical_apicid = -1U; EXPORT_SYMBOL(boot_cpu_physical_apicid); -physid_mask_t phys_cpu_present_map; - DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID; EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid); diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 78828b0f604f..455d3c80960b 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -442,7 +442,7 @@ static void __init reserve_ebda_region(void) } #ifndef CONFIG_NEED_MULTIPLE_NODES -void __init setup_bootmem_allocator(void); +static void __init setup_bootmem_allocator(void); static unsigned long __init setup_memory(void) { /* @@ -477,7 +477,7 @@ static unsigned long __init setup_memory(void) return max_low_pfn; } -void __init zone_sizes_init(void) +static void __init zone_sizes_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 6a925394bc7e..eef79e84145f 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -184,7 +184,7 @@ static void unmap_cpu_to_node(int cpu) u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; -void map_cpu_to_logical_apicid(void) +static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); int apicid = logical_smp_processor_id(); @@ -197,7 +197,7 @@ void map_cpu_to_logical_apicid(void) map_cpu_to_node(cpu, node); } -void unmap_cpu_to_logical_apicid(int cpu) +static void unmap_cpu_to_logical_apicid(int cpu) { cpu_2_logical_apicid[cpu] = BAD_APICID; unmap_cpu_to_node(cpu); @@ -211,7 +211,7 @@ void unmap_cpu_to_logical_apicid(int cpu) * Report back to the Boot Processor. * Running on AP. */ -void __cpuinit smp_callin(void) +static void __cpuinit smp_callin(void) { int cpuid, phys_id; unsigned long timeout; @@ -436,7 +436,7 @@ valid_k7: #endif } -void __cpuinit smp_checks(void) +static void __cpuinit smp_checks(void) { if (smp_b_stepping) printk(KERN_WARNING "WARNING: SMP operation may be unreliable" @@ -565,7 +565,7 @@ void __init smp_alloc_memory(void) } #endif -void impress_friends(void) +static void impress_friends(void) { int cpu; unsigned long bogosum = 0; @@ -1039,8 +1039,8 @@ int __cpuinit native_cpu_up(unsigned int cpu) #ifdef CONFIG_X86_32 /* init low mem mapping */ - clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, - min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS)); + clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY, + min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); flush_tlb_all(); #endif @@ -1287,7 +1287,7 @@ void cpu_exit_clear(void) } # endif /* CONFIG_X86_32 */ -void remove_siblinginfo(int cpu) +static void remove_siblinginfo(int cpu) { int sibling; struct cpuinfo_x86 *c = &cpu_data(cpu); diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c index 1558e513757e..df224a8774cb 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/kernel/tlb_64.c @@ -191,7 +191,7 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, spin_unlock(&f->tlbstate_lock); } -int __cpuinit init_smp_flush(void) +static int __cpuinit init_smp_flush(void) { int i; diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 12affe1f9bce..956f38927aa7 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -320,7 +320,7 @@ static void check_zeroed_page(u32 pfn, int type, struct page *page) * pdes need to be zeroed. */ if (type & VMI_PAGE_CLONE) - limit = USER_PTRS_PER_PGD; + limit = KERNEL_PGD_BOUNDARY; for (i = 0; i < limit; i++) BUG_ON(ptr[i]); } @@ -392,13 +392,13 @@ static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type) } #endif -static void vmi_allocate_pt(struct mm_struct *mm, u32 pfn) +static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn) { vmi_set_page_type(pfn, VMI_PAGE_L1); vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); } -static void vmi_allocate_pd(struct mm_struct *mm, u32 pfn) +static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn) { /* * This call comes in very early, before mem_map is setup. @@ -409,20 +409,20 @@ static void vmi_allocate_pd(struct mm_struct *mm, u32 pfn) vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); } -static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) { vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); vmi_check_page_type(clonepfn, VMI_PAGE_L2); vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); } -static void vmi_release_pt(u32 pfn) +static void vmi_release_pte(u32 pfn) { vmi_ops.release_page(pfn, VMI_PAGE_L1); vmi_set_page_type(pfn, VMI_PAGE_NORMAL); } -static void vmi_release_pd(u32 pfn) +static void vmi_release_pmd(u32 pfn) { vmi_ops.release_page(pfn, VMI_PAGE_L2); vmi_set_page_type(pfn, VMI_PAGE_NORMAL); @@ -871,15 +871,15 @@ static inline int __init activate_vmi(void) vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage); if (vmi_ops.allocate_page) { - pv_mmu_ops.alloc_pt = vmi_allocate_pt; - pv_mmu_ops.alloc_pd = vmi_allocate_pd; - pv_mmu_ops.alloc_pd_clone = vmi_allocate_pd_clone; + pv_mmu_ops.alloc_pte = vmi_allocate_pte; + pv_mmu_ops.alloc_pmd = vmi_allocate_pmd; + pv_mmu_ops.alloc_pmd_clone = vmi_allocate_pmd_clone; } vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage); if (vmi_ops.release_page) { - pv_mmu_ops.release_pt = vmi_release_pt; - pv_mmu_ops.release_pd = vmi_release_pd; + pv_mmu_ops.release_pte = vmi_release_pte; + pv_mmu_ops.release_pmd = vmi_release_pmd; } /* Set linear is needed in all cases */ diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index edff4c985485..61efa2f7d564 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -216,7 +216,7 @@ vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) return 0; } -long __vsyscall(3) venosys_1(void) +static long __vsyscall(3) venosys_1(void) { return -ENOSYS; } diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index 2a8456a1f44f..57484e91ab90 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -11,22 +11,9 @@ /* Have we found an MP table */ int smp_found_config; -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -int apic_version [MAX_APICS]; - int pic_mode; -unsigned long mp_lapic_addr; - -/* Processor that is doing the boot up */ -unsigned int boot_cpu_physical_apicid = -1U; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map; -unsigned int __initdata maxcpus = NR_CPUS; +extern unsigned int __cpuinitdata maxcpus; /* * The Visual Workstation is Intel MP compliant in the hardware diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 96f60c7cd124..6e2c4efce0ef 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -206,11 +206,6 @@ static struct irq_chip vic_chip = { /* used to count up as CPUs are brought on line (starts at 0) */ static int cpucount = 0; -/* steal a page from the bottom of memory for the trampoline and - * squirrel its address away here. This will be in kernel virtual - * space */ -unsigned char *trampoline_base; - /* The per cpu profile stuff - used in smp_local_timer_interrupt */ static DEFINE_PER_CPU(int, prof_multiplier) = 1; static DEFINE_PER_CPU(int, prof_old_multiplier) = 1; @@ -427,18 +422,6 @@ void __init smp_store_cpu_info(int id) identify_secondary_cpu(c); } -/* set up the trampoline and return the physical address of the code */ -unsigned long __init setup_trampoline(void) -{ - /* these two are global symbols in trampoline.S */ - extern const __u8 trampoline_end[]; - extern const __u8 trampoline_data[]; - - memcpy(trampoline_base, trampoline_data, - trampoline_end - trampoline_data); - return virt_to_phys(trampoline_base); -} - /* Routine initially called when a non-boot CPU is brought online */ static void __init start_secondary(void *unused) { @@ -560,8 +543,8 @@ static void __init do_boot_cpu(__u8 cpu) hijack_source.idt.Offset, stack_start.sp)); /* init lowmem identity mapping */ - clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, - min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS)); + clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY, + min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); flush_tlb_all(); if (quad_boot) { diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 20941d2954e2..b7b3e4c7cfc9 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -1,5 +1,5 @@ obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \ - pat.o + pat.o pgtable.o obj-$(CONFIG_X86_32) += pgtable_32.o diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 6791b8334bc6..2c24bea92c66 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -324,7 +324,7 @@ static const struct file_operations ptdump_fops = { .release = single_release, }; -int pt_dump_init(void) +static int pt_dump_init(void) { struct dentry *pe; diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 9ec62da85fd7..baf7c4f643c8 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -71,7 +71,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd) if (!(pgd_val(*pgd) & _PAGE_PRESENT)) { pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); - paravirt_alloc_pd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT); + paravirt_alloc_pmd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT); set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT)); pud = pud_offset(pgd, 0); BUG_ON(pmd_table != pmd_offset(pud, 0)); @@ -100,7 +100,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd) (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE); } - paravirt_alloc_pt(&init_mm, __pa(page_table) >> PAGE_SHIFT); + paravirt_alloc_pte(&init_mm, __pa(page_table) >> PAGE_SHIFT); set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE)); BUG_ON(page_table != pte_offset_kernel(pmd, 0)); } @@ -227,6 +227,25 @@ static inline int page_kills_ppro(unsigned long pagenr) return 0; } +/* + * devmem_is_allowed() checks to see if /dev/mem access to a certain address + * is valid. The argument is a physical page number. + * + * + * On x86, access has to be given to the first megabyte of ram because that area + * contains bios code and data regions used by X and dosemu and similar apps. + * Access has to be given to non-kernel-ram areas as well, these contain the PCI + * mmio resources as well as potential bios/acpi data regions. + */ +int devmem_is_allowed(unsigned long pagenr) +{ + if (pagenr <= 256) + return 1; + if (!page_is_ram(pagenr)) + return 1; + return 0; +} + #ifdef CONFIG_HIGHMEM pte_t *kmap_pte; pgprot_t kmap_prot; @@ -365,7 +384,7 @@ void __init native_pagetable_setup_start(pgd_t *base) pte_clear(NULL, va, pte); } - paravirt_alloc_pd(&init_mm, __pa(base) >> PAGE_SHIFT); + paravirt_alloc_pmd(&init_mm, __pa(base) >> PAGE_SHIFT); } void __init native_pagetable_setup_done(pgd_t *base) @@ -457,7 +476,7 @@ void zap_low_mappings(void) * Note that "pgd_clear()" doesn't do it for * us, because pgd_clear() is a no-op on i386. */ - for (i = 0; i < USER_PTRS_PER_PGD; i++) { + for (i = 0; i < KERNEL_PGD_BOUNDARY; i++) { #ifdef CONFIG_X86_PAE set_pgd(swapper_pg_dir+i, __pgd(1 + __pa(empty_zero_page))); #else diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 1ff7906a9a4d..0cca62663037 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -135,7 +135,7 @@ static __init void *spp_getpage(void) return ptr; } -static __init void +static void set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot) { pgd_t *pgd; @@ -173,7 +173,7 @@ set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot) new_pte = pfn_pte(phys >> PAGE_SHIFT, prot); pte = pte_offset_kernel(pmd, vaddr); - if (!pte_none(*pte) && + if (!pte_none(*pte) && pte_val(new_pte) && pte_val(*pte) != (pte_val(new_pte) & __supported_pte_mask)) pte_ERROR(*pte); set_pte(pte, new_pte); @@ -214,8 +214,7 @@ void __init cleanup_highmap(void) } /* NOTE: this is meant to be run only at boot */ -void __init -__set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) { unsigned long address = __fix_to_virt(idx); @@ -664,6 +663,26 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif /* CONFIG_MEMORY_HOTPLUG */ +/* + * devmem_is_allowed() checks to see if /dev/mem access to a certain address + * is valid. The argument is a physical page number. + * + * + * On x86, access has to be given to the first megabyte of ram because that area + * contains bios code and data regions used by X and dosemu and similar apps. + * Access has to be given to non-kernel-ram areas as well, these contain the PCI + * mmio resources as well as potential bios/acpi data regions. + */ +int devmem_is_allowed(unsigned long pagenr) +{ + if (pagenr <= 256) + return 1; + if (!page_is_ram(pagenr)) + return 1; + return 0; +} + + static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules, kcore_vsyscall; diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 3a4baf95e24d..d176b23110cc 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -336,6 +336,35 @@ void iounmap(volatile void __iomem *addr) } EXPORT_SYMBOL(iounmap); +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +void *xlate_dev_mem_ptr(unsigned long phys) +{ + void *addr; + unsigned long start = phys & PAGE_MASK; + + /* If page is RAM, we can use __va. Otherwise ioremap and unmap. */ + if (page_is_ram(start >> PAGE_SHIFT)) + return __va(phys); + + addr = (void *)ioremap(start, PAGE_SIZE); + if (addr) + addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK)); + + return addr; +} + +void unxlate_dev_mem_ptr(unsigned long phys, void *addr) +{ + if (page_is_ram(phys >> PAGE_SHIFT)) + return; + + iounmap((void __iomem *)((unsigned long)addr & PAGE_MASK)); + return; +} + #ifdef CONFIG_X86_32 int __initdata early_ioremap_debug; @@ -407,7 +436,7 @@ void __init early_ioremap_clear(void) pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)); pmd_clear(pmd); - paravirt_release_pt(__pa(bm_pte) >> PAGE_SHIFT); + paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT); __flush_tlb_all(); } diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index f7823a172868..bd5e05c654dc 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -483,9 +483,7 @@ static int split_large_page(pte_t *kpte, unsigned long address) goto out_unlock; pbase = (pte_t *)page_address(base); -#ifdef CONFIG_X86_32 - paravirt_alloc_pt(&init_mm, page_to_pfn(base)); -#endif + paravirt_alloc_pte(&init_mm, page_to_pfn(base)); ref_prot = pte_pgprot(pte_clrhuge(*kpte)); #ifdef CONFIG_X86_64 @@ -993,7 +991,7 @@ static const struct file_operations dpa_fops = { .release = single_release, }; -int __init debug_pagealloc_proc_init(void) +static int __init debug_pagealloc_proc_init(void) { struct dentry *de; diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 72c0f6097402..ef8b64b89c7d 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/gfp.h> #include <linux/fs.h> +#include <linux/bootmem.h> #include <asm/msr.h> #include <asm/tlbflush.h> @@ -21,6 +22,7 @@ #include <asm/cacheflush.h> #include <asm/fcntl.h> #include <asm/mtrr.h> +#include <asm/io.h> int pat_wc_enabled = 1; @@ -190,6 +192,21 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, return 0; } +/* + * req_type typically has one of the: + * - _PAGE_CACHE_WB + * - _PAGE_CACHE_WC + * - _PAGE_CACHE_UC_MINUS + * - _PAGE_CACHE_UC + * + * req_type will have a special case value '-1', when requester want to inherit + * the memory type from mtrr (if WB), existing PAT, defaulting to UC_MINUS. + * + * If ret_type is NULL, function will return an error if it cannot reserve the + * region with req_type. If ret_type is non-null, function will return + * available type in ret_type in case of no error. In case of any error + * it will return a negative return value. + */ int reserve_memtype(u64 start, u64 end, unsigned long req_type, unsigned long *ret_type) { @@ -200,9 +217,14 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, /* Only track when pat_wc_enabled */ if (!pat_wc_enabled) { - if (ret_type) - *ret_type = req_type; - + /* This is identical to page table setting without PAT */ + if (ret_type) { + if (req_type == -1) { + *ret_type = _PAGE_CACHE_WB; + } else { + *ret_type = req_type; + } + } return 0; } @@ -214,8 +236,29 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, return 0; } - req_type &= _PAGE_CACHE_MASK; - err = pat_x_mtrr_type(start, end, req_type, &actual_type); + if (req_type == -1) { + /* + * Special case where caller wants to inherit from mtrr or + * existing pat mapping, defaulting to UC_MINUS in case of + * no match. + */ + u8 mtrr_type = mtrr_type_lookup(start, end); + if (mtrr_type == 0xFE) { /* MTRR match error */ + err = -1; + } + + if (mtrr_type == MTRR_TYPE_WRBACK) { + req_type = _PAGE_CACHE_WB; + actual_type = _PAGE_CACHE_WB; + } else { + req_type = _PAGE_CACHE_UC_MINUS; + actual_type = _PAGE_CACHE_UC_MINUS; + } + } else { + req_type &= _PAGE_CACHE_MASK; + err = pat_x_mtrr_type(start, end, req_type, &actual_type); + } + if (err) { if (ret_type) *ret_type = actual_type; @@ -241,7 +284,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, struct memtype *saved_ptr; if (parse->start >= end) { - printk("New Entry\n"); + pr_debug("New Entry\n"); list_add(&new_entry->nd, parse->nd.prev); new_entry = NULL; break; @@ -343,7 +386,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - printk("Overlap at 0x%Lx-0x%Lx\n", + printk(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, &saved_ptr->nd); @@ -353,7 +396,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, } if (err) { - printk( + printk(KERN_INFO "reserve_memtype failed 0x%Lx-0x%Lx, track %s, req %s\n", start, end, cattr_name(new_entry->type), cattr_name(req_type)); @@ -365,16 +408,16 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, if (new_entry) { /* No conflict. Not yet added to the list. Add to the tail */ list_add_tail(&new_entry->nd, &memtype_list); - printk("New Entry\n"); - } + pr_debug("New Entry\n"); + } if (ret_type) { - printk( + pr_debug( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", start, end, cattr_name(actual_type), cattr_name(req_type), cattr_name(*ret_type)); } else { - printk( + pr_debug( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n", start, end, cattr_name(actual_type), cattr_name(req_type)); @@ -411,11 +454,115 @@ int free_memtype(u64 start, u64 end) spin_unlock(&memtype_lock); if (err) { - printk(KERN_DEBUG "%s:%d freeing invalid memtype %Lx-%Lx\n", + printk(KERN_INFO "%s:%d freeing invalid memtype %Lx-%Lx\n", current->comm, current->pid, start, end); } - printk( "free_memtype request 0x%Lx-0x%Lx\n", start, end); + pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end); return err; } + +/* + * /dev/mem mmap interface. The memtype used for mapping varies: + * - Use UC for mappings with O_SYNC flag + * - Without O_SYNC flag, if there is any conflict in reserve_memtype, + * inherit the memtype from existing mapping. + * - Else use UC_MINUS memtype (for backward compatibility with existing + * X drivers. + */ +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + return vma_prot; +} + +int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t *vma_prot) +{ + u64 offset = ((u64) pfn) << PAGE_SHIFT; + unsigned long flags = _PAGE_CACHE_UC_MINUS; + unsigned long ret_flags; + int retval; + + if (file->f_flags & O_SYNC) { + flags = _PAGE_CACHE_UC; + } + +#ifdef CONFIG_X86_32 + /* + * On the PPro and successors, the MTRRs are used to set + * memory types for physical addresses outside main memory, + * so blindly setting UC or PWT on those pages is wrong. + * For Pentiums and earlier, the surround logic should disable + * caching for the high addresses through the KEN pin, but + * we maintain the tradition of paranoia in this code. + */ + if (!pat_wc_enabled && + ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) || + test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) || + test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) || + test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) && + (pfn << PAGE_SHIFT) >= __pa(high_memory)) { + flags = _PAGE_CACHE_UC; + } +#endif + + /* + * With O_SYNC, we can only take UC mapping. Fail if we cannot. + * Without O_SYNC, we want to get + * - WB for WB-able memory and no other conflicting mappings + * - UC_MINUS for non-WB-able memory with no other conflicting mappings + * - Inherit from confliting mappings otherwise + */ + if (flags != _PAGE_CACHE_UC_MINUS) { + retval = reserve_memtype(offset, offset + size, flags, NULL); + } else { + retval = reserve_memtype(offset, offset + size, -1, &ret_flags); + } + + if (retval < 0) + return 0; + + flags = ret_flags; + + if (pfn <= max_pfn_mapped && + ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { + free_memtype(offset, offset + size); + printk(KERN_INFO + "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", + current->comm, current->pid, + cattr_name(flags), + offset, offset + size); + return 0; + } + + *vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) | + flags); + return 1; +} + +void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) +{ + u64 addr = (u64)pfn << PAGE_SHIFT; + unsigned long flags; + unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK); + + reserve_memtype(addr, addr + size, want_flags, &flags); + if (flags != want_flags) { + printk(KERN_INFO + "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n", + current->comm, current->pid, + cattr_name(want_flags), + addr, addr + size, + cattr_name(flags)); + } +} + +void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) +{ + u64 addr = (u64)pfn << PAGE_SHIFT; + + free_memtype(addr, addr + size); +} + diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c new file mode 100644 index 000000000000..50159764f694 --- /dev/null +++ b/arch/x86/mm/pgtable.c @@ -0,0 +1,276 @@ +#include <linux/mm.h> +#include <asm/pgalloc.h> +#include <asm/pgtable.h> +#include <asm/tlb.h> + +pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +{ + return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); +} + +pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) +{ + struct page *pte; + +#ifdef CONFIG_HIGHPTE + pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0); +#else + pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); +#endif + if (pte) + pgtable_page_ctor(pte); + return pte; +} + +void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte) +{ + pgtable_page_dtor(pte); + paravirt_release_pte(page_to_pfn(pte)); + tlb_remove_page(tlb, pte); +} + +#if PAGETABLE_LEVELS > 2 +void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +{ + paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT); + tlb_remove_page(tlb, virt_to_page(pmd)); +} + +#if PAGETABLE_LEVELS > 3 +void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) +{ + paravirt_release_pud(__pa(pud) >> PAGE_SHIFT); + tlb_remove_page(tlb, virt_to_page(pud)); +} +#endif /* PAGETABLE_LEVELS > 3 */ +#endif /* PAGETABLE_LEVELS > 2 */ + +static inline void pgd_list_add(pgd_t *pgd) +{ + struct page *page = virt_to_page(pgd); + + list_add(&page->lru, &pgd_list); +} + +static inline void pgd_list_del(pgd_t *pgd) +{ + struct page *page = virt_to_page(pgd); + + list_del(&page->lru); +} + +#define UNSHARED_PTRS_PER_PGD \ + (SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD) + +static void pgd_ctor(void *p) +{ + pgd_t *pgd = p; + unsigned long flags; + + /* Clear usermode parts of PGD */ + memset(pgd, 0, KERNEL_PGD_BOUNDARY*sizeof(pgd_t)); + + spin_lock_irqsave(&pgd_lock, flags); + + /* If the pgd points to a shared pagetable level (either the + ptes in non-PAE, or shared PMD in PAE), then just copy the + references from swapper_pg_dir. */ + if (PAGETABLE_LEVELS == 2 || + (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD) || + PAGETABLE_LEVELS == 4) { + clone_pgd_range(pgd + KERNEL_PGD_BOUNDARY, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); + paravirt_alloc_pmd_clone(__pa(pgd) >> PAGE_SHIFT, + __pa(swapper_pg_dir) >> PAGE_SHIFT, + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); + } + + /* list required to sync kernel mapping updates */ + if (!SHARED_KERNEL_PMD) + pgd_list_add(pgd); + + spin_unlock_irqrestore(&pgd_lock, flags); +} + +static void pgd_dtor(void *pgd) +{ + unsigned long flags; /* can be called from interrupt context */ + + if (SHARED_KERNEL_PMD) + return; + + spin_lock_irqsave(&pgd_lock, flags); + pgd_list_del(pgd); + spin_unlock_irqrestore(&pgd_lock, flags); +} + +/* + * List of all pgd's needed for non-PAE so it can invalidate entries + * in both cached and uncached pgd's; not needed for PAE since the + * kernel pmd is shared. If PAE were not to share the pmd a similar + * tactic would be needed. This is essentially codepath-based locking + * against pageattr.c; it is the unique case in which a valid change + * of kernel pagetables can't be lazily synchronized by vmalloc faults. + * vmalloc faults work because attached pagetables are never freed. + * -- wli + */ + +#ifdef CONFIG_X86_PAE +/* + * Mop up any pmd pages which may still be attached to the pgd. + * Normally they will be freed by munmap/exit_mmap, but any pmd we + * preallocate which never got a corresponding vma will need to be + * freed manually. + */ +static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp) +{ + int i; + + for(i = 0; i < UNSHARED_PTRS_PER_PGD; i++) { + pgd_t pgd = pgdp[i]; + + if (pgd_val(pgd) != 0) { + pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd); + + pgdp[i] = native_make_pgd(0); + + paravirt_release_pmd(pgd_val(pgd) >> PAGE_SHIFT); + pmd_free(mm, pmd); + } + } +} + +/* + * In PAE mode, we need to do a cr3 reload (=tlb flush) when + * updating the top-level pagetable entries to guarantee the + * processor notices the update. Since this is expensive, and + * all 4 top-level entries are used almost immediately in a + * new process's life, we just pre-populate them here. + * + * Also, if we're in a paravirt environment where the kernel pmd is + * not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate + * and initialize the kernel pmds here. + */ +static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd) +{ + pud_t *pud; + unsigned long addr; + int i; + + pud = pud_offset(pgd, 0); + for (addr = i = 0; i < UNSHARED_PTRS_PER_PGD; + i++, pud++, addr += PUD_SIZE) { + pmd_t *pmd = pmd_alloc_one(mm, addr); + + if (!pmd) { + pgd_mop_up_pmds(mm, pgd); + return 0; + } + + if (i >= KERNEL_PGD_BOUNDARY) + memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]), + sizeof(pmd_t) * PTRS_PER_PMD); + + pud_populate(mm, pud, pmd); + } + + return 1; +} + +void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd) +{ + paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT); + + /* Note: almost everything apart from _PAGE_PRESENT is + reserved at the pmd (PDPT) level. */ + set_pud(pudp, __pud(__pa(pmd) | _PAGE_PRESENT)); + + /* + * According to Intel App note "TLBs, Paging-Structure Caches, + * and Their Invalidation", April 2007, document 317080-001, + * section 8.1: in PAE mode we explicitly have to flush the + * TLB via cr3 if the top-level pgd is changed... + */ + if (mm == current->active_mm) + write_cr3(read_cr3()); +} +#else /* !CONFIG_X86_PAE */ +/* No need to prepopulate any pagetable entries in non-PAE modes. */ +static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd) +{ + return 1; +} + +static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgd) +{ +} +#endif /* CONFIG_X86_PAE */ + +pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); + + /* so that alloc_pmd can use it */ + mm->pgd = pgd; + if (pgd) + pgd_ctor(pgd); + + if (pgd && !pgd_prepopulate_pmd(mm, pgd)) { + pgd_dtor(pgd); + free_page((unsigned long)pgd); + pgd = NULL; + } + + return pgd; +} + +void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + pgd_mop_up_pmds(mm, pgd); + pgd_dtor(pgd); + free_page((unsigned long)pgd); +} + +int ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep, + pte_t entry, int dirty) +{ + int changed = !pte_same(*ptep, entry); + + if (changed && dirty) { + *ptep = entry; + pte_update_defer(vma->vm_mm, address, ptep); + flush_tlb_page(vma, address); + } + + return changed; +} + +int ptep_test_and_clear_young(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ + int ret = 0; + + if (pte_young(*ptep)) + ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, + &ptep->pte); + + if (ret) + pte_update(vma->vm_mm, addr, ptep); + + return ret; +} + +int ptep_clear_flush_young(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep) +{ + int young; + + young = ptep_test_and_clear_young(vma, address, ptep); + if (young) + flush_tlb_page(vma, address); + + return young; +} diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c index 6fb9e7c6893f..9ee007be9142 100644 --- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -173,210 +173,6 @@ void reserve_top_address(unsigned long reserve) __VMALLOC_RESERVE += reserve; } -pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); -} - -pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *pte; - -#ifdef CONFIG_HIGHPTE - pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0); -#else - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); -#endif - if (pte) - pgtable_page_ctor(pte); - return pte; -} - -/* - * List of all pgd's needed for non-PAE so it can invalidate entries - * in both cached and uncached pgd's; not needed for PAE since the - * kernel pmd is shared. If PAE were not to share the pmd a similar - * tactic would be needed. This is essentially codepath-based locking - * against pageattr.c; it is the unique case in which a valid change - * of kernel pagetables can't be lazily synchronized by vmalloc faults. - * vmalloc faults work because attached pagetables are never freed. - * -- wli - */ -static inline void pgd_list_add(pgd_t *pgd) -{ - struct page *page = virt_to_page(pgd); - - list_add(&page->lru, &pgd_list); -} - -static inline void pgd_list_del(pgd_t *pgd) -{ - struct page *page = virt_to_page(pgd); - - list_del(&page->lru); -} - -#define UNSHARED_PTRS_PER_PGD \ - (SHARED_KERNEL_PMD ? USER_PTRS_PER_PGD : PTRS_PER_PGD) - -static void pgd_ctor(void *p) -{ - pgd_t *pgd = p; - unsigned long flags; - - /* Clear usermode parts of PGD */ - memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t)); - - spin_lock_irqsave(&pgd_lock, flags); - - /* If the pgd points to a shared pagetable level (either the - ptes in non-PAE, or shared PMD in PAE), then just copy the - references from swapper_pg_dir. */ - if (PAGETABLE_LEVELS == 2 || - (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD)) { - clone_pgd_range(pgd + USER_PTRS_PER_PGD, - swapper_pg_dir + USER_PTRS_PER_PGD, - KERNEL_PGD_PTRS); - paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT, - __pa(swapper_pg_dir) >> PAGE_SHIFT, - USER_PTRS_PER_PGD, - KERNEL_PGD_PTRS); - } - - /* list required to sync kernel mapping updates */ - if (!SHARED_KERNEL_PMD) - pgd_list_add(pgd); - - spin_unlock_irqrestore(&pgd_lock, flags); -} - -static void pgd_dtor(void *pgd) -{ - unsigned long flags; /* can be called from interrupt context */ - - if (SHARED_KERNEL_PMD) - return; - - spin_lock_irqsave(&pgd_lock, flags); - pgd_list_del(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); -} - -#ifdef CONFIG_X86_PAE -/* - * Mop up any pmd pages which may still be attached to the pgd. - * Normally they will be freed by munmap/exit_mmap, but any pmd we - * preallocate which never got a corresponding vma will need to be - * freed manually. - */ -static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp) -{ - int i; - - for(i = 0; i < UNSHARED_PTRS_PER_PGD; i++) { - pgd_t pgd = pgdp[i]; - - if (pgd_val(pgd) != 0) { - pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd); - - pgdp[i] = native_make_pgd(0); - - paravirt_release_pd(pgd_val(pgd) >> PAGE_SHIFT); - pmd_free(mm, pmd); - } - } -} - -/* - * In PAE mode, we need to do a cr3 reload (=tlb flush) when - * updating the top-level pagetable entries to guarantee the - * processor notices the update. Since this is expensive, and - * all 4 top-level entries are used almost immediately in a - * new process's life, we just pre-populate them here. - * - * Also, if we're in a paravirt environment where the kernel pmd is - * not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate - * and initialize the kernel pmds here. - */ -static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd) -{ - pud_t *pud; - unsigned long addr; - int i; - - pud = pud_offset(pgd, 0); - for (addr = i = 0; i < UNSHARED_PTRS_PER_PGD; - i++, pud++, addr += PUD_SIZE) { - pmd_t *pmd = pmd_alloc_one(mm, addr); - - if (!pmd) { - pgd_mop_up_pmds(mm, pgd); - return 0; - } - - if (i >= USER_PTRS_PER_PGD) - memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]), - sizeof(pmd_t) * PTRS_PER_PMD); - - pud_populate(mm, pud, pmd); - } - - return 1; -} -#else /* !CONFIG_X86_PAE */ -/* No need to prepopulate any pagetable entries in non-PAE modes. */ -static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd) -{ - return 1; -} - -static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp) -{ -} -#endif /* CONFIG_X86_PAE */ - -pgd_t *pgd_alloc(struct mm_struct *mm) -{ - pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); - - /* so that alloc_pd can use it */ - mm->pgd = pgd; - if (pgd) - pgd_ctor(pgd); - - if (pgd && !pgd_prepopulate_pmd(mm, pgd)) { - pgd_dtor(pgd); - free_page((unsigned long)pgd); - pgd = NULL; - } - - return pgd; -} - -void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - pgd_mop_up_pmds(mm, pgd); - pgd_dtor(pgd); - free_page((unsigned long)pgd); -} - -void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte) -{ - pgtable_page_dtor(pte); - paravirt_release_pt(page_to_pfn(pte)); - tlb_remove_page(tlb, pte); -} - -#ifdef CONFIG_X86_PAE - -void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) -{ - paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); - tlb_remove_page(tlb, virt_to_page(pmd)); -} - -#endif - int pmd_bad(pmd_t pmd) { WARN_ON_ONCE(pmd_bad_v1(pmd) != pmd_bad_v2(pmd)); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index fb43d89f46f3..3890234e5b26 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -163,7 +163,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) pxm, apic_id, node); } -int update_end_of_memory(unsigned long end) {return -1;} +static int update_end_of_memory(unsigned long end) {return -1;} static int hotadd_enough_memory(struct bootnode *nd) {return 1;} #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE static inline int save_add_info(void) {return 1;} diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 4d5f2649bee4..2e641be2737e 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -6,7 +6,7 @@ config XEN bool "Xen guest support" select PARAVIRT depends on X86_32 - depends on X86_CMPXCHG && X86_TSC && !NEED_MULTIPLE_NODES && !(X86_VISWS || X86_VOYAGER) + depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 343df246bd3e..3d8df981d5fd 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ -obj-y := enlighten.o setup.o features.o multicalls.o mmu.o \ - events.o time.o manage.o xen-asm.o +obj-y := enlighten.o setup.o multicalls.o mmu.o \ + time.o manage.o xen-asm.o grant-table.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c0388220cf97..c8a56e457d61 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -155,7 +155,8 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, if (*ax == 1) maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */ (1 << X86_FEATURE_ACPI) | /* disable ACPI */ - (1 << X86_FEATURE_SEP) | /* disable SEP */ + (1 << X86_FEATURE_MCE) | /* disable MCE */ + (1 << X86_FEATURE_MCA) | /* disable MCA */ (1 << X86_FEATURE_ACC)); /* thermal monitoring */ asm(XEN_EMULATE_PREFIX "cpuid" @@ -531,26 +532,37 @@ static void xen_apic_write(unsigned long reg, u32 val) static void xen_flush_tlb(void) { struct mmuext_op *op; - struct multicall_space mcs = xen_mc_entry(sizeof(*op)); + struct multicall_space mcs; + + preempt_disable(); + + mcs = xen_mc_entry(sizeof(*op)); op = mcs.args; op->cmd = MMUEXT_TLB_FLUSH_LOCAL; MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); xen_mc_issue(PARAVIRT_LAZY_MMU); + + preempt_enable(); } static void xen_flush_tlb_single(unsigned long addr) { struct mmuext_op *op; - struct multicall_space mcs = xen_mc_entry(sizeof(*op)); + struct multicall_space mcs; + + preempt_disable(); + mcs = xen_mc_entry(sizeof(*op)); op = mcs.args; op->cmd = MMUEXT_INVLPG_LOCAL; op->arg1.linear_addr = addr & PAGE_MASK; MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); xen_mc_issue(PARAVIRT_LAZY_MMU); + + preempt_enable(); } static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, @@ -655,15 +667,17 @@ static void xen_write_cr3(unsigned long cr3) /* Early in boot, while setting up the initial pagetable, assume everything is pinned. */ -static __init void xen_alloc_pt_init(struct mm_struct *mm, u32 pfn) +static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn) { +#ifdef CONFIG_FLATMEM BUG_ON(mem_map); /* should only be used early */ +#endif make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); } -/* Early release_pt assumes that all pts are pinned, since there's +/* Early release_pte assumes that all pts are pinned, since there's only init_mm and anything attached to that is pinned. */ -static void xen_release_pt_init(u32 pfn) +static void xen_release_pte_init(u32 pfn) { make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } @@ -697,12 +711,12 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) } } -static void xen_alloc_pt(struct mm_struct *mm, u32 pfn) +static void xen_alloc_pte(struct mm_struct *mm, u32 pfn) { xen_alloc_ptpage(mm, pfn, PT_PTE); } -static void xen_alloc_pd(struct mm_struct *mm, u32 pfn) +static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn) { xen_alloc_ptpage(mm, pfn, PT_PMD); } @@ -722,12 +736,12 @@ static void xen_release_ptpage(u32 pfn, unsigned level) } } -static void xen_release_pt(u32 pfn) +static void xen_release_pte(u32 pfn) { xen_release_ptpage(pfn, PT_PTE); } -static void xen_release_pd(u32 pfn) +static void xen_release_pmd(u32 pfn) { xen_release_ptpage(pfn, PT_PMD); } @@ -849,10 +863,10 @@ static __init void xen_pagetable_setup_done(pgd_t *base) { /* This will work as long as patching hasn't happened yet (which it hasn't) */ - pv_mmu_ops.alloc_pt = xen_alloc_pt; - pv_mmu_ops.alloc_pd = xen_alloc_pd; - pv_mmu_ops.release_pt = xen_release_pt; - pv_mmu_ops.release_pd = xen_release_pd; + pv_mmu_ops.alloc_pte = xen_alloc_pte; + pv_mmu_ops.alloc_pmd = xen_alloc_pmd; + pv_mmu_ops.release_pte = xen_release_pte; + pv_mmu_ops.release_pmd = xen_release_pmd; pv_mmu_ops.set_pte = xen_set_pte; setup_shared_info(); @@ -994,7 +1008,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .read_pmc = native_read_pmc, .iret = xen_iret, - .irq_enable_syscall_ret = NULL, /* never called */ + .irq_enable_syscall_ret = xen_sysexit, .load_tr_desc = paravirt_nop, .set_ldt = xen_set_ldt, @@ -1059,11 +1073,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .pte_update = paravirt_nop, .pte_update_defer = paravirt_nop, - .alloc_pt = xen_alloc_pt_init, - .release_pt = xen_release_pt_init, - .alloc_pd = xen_alloc_pt_init, - .alloc_pd_clone = paravirt_nop, - .release_pd = xen_release_pt_init, + .alloc_pte = xen_alloc_pte_init, + .release_pte = xen_release_pte_init, + .alloc_pmd = xen_alloc_pte_init, + .alloc_pmd_clone = paravirt_nop, + .release_pmd = xen_release_pte_init, #ifdef CONFIG_HIGHPTE .kmap_atomic_pte = xen_kmap_atomic_pte, diff --git a/arch/x86/xen/events.c b/arch/x86/xen/events.c deleted file mode 100644 index dcf613e17581..000000000000 --- a/arch/x86/xen/events.c +++ /dev/null @@ -1,591 +0,0 @@ -/* - * Xen event channels - * - * Xen models interrupts with abstract event channels. Because each - * domain gets 1024 event channels, but NR_IRQ is not that large, we - * must dynamically map irqs<->event channels. The event channels - * interface with the rest of the kernel by defining a xen interrupt - * chip. When an event is recieved, it is mapped to an irq and sent - * through the normal interrupt processing path. - * - * There are four kinds of events which can be mapped to an event - * channel: - * - * 1. Inter-domain notifications. This includes all the virtual - * device events, since they're driven by front-ends in another domain - * (typically dom0). - * 2. VIRQs, typically used for timers. These are per-cpu events. - * 3. IPIs. - * 4. Hardware interrupts. Not supported at present. - * - * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 - */ - -#include <linux/linkage.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <asm/ptrace.h> -#include <asm/irq.h> -#include <asm/sync_bitops.h> -#include <asm/xen/hypercall.h> -#include <asm/xen/hypervisor.h> - -#include <xen/events.h> -#include <xen/interface/xen.h> -#include <xen/interface/event_channel.h> - -#include "xen-ops.h" - -/* - * This lock protects updates to the following mapping and reference-count - * arrays. The lock does not need to be acquired to read the mapping tables. - */ -static DEFINE_SPINLOCK(irq_mapping_update_lock); - -/* IRQ <-> VIRQ mapping. */ -static DEFINE_PER_CPU(int, virq_to_irq[NR_VIRQS]) = {[0 ... NR_VIRQS-1] = -1}; - -/* IRQ <-> IPI mapping */ -static DEFINE_PER_CPU(int, ipi_to_irq[XEN_NR_IPIS]) = {[0 ... XEN_NR_IPIS-1] = -1}; - -/* Packed IRQ information: binding type, sub-type index, and event channel. */ -struct packed_irq -{ - unsigned short evtchn; - unsigned char index; - unsigned char type; -}; - -static struct packed_irq irq_info[NR_IRQS]; - -/* Binding types. */ -enum { - IRQT_UNBOUND, - IRQT_PIRQ, - IRQT_VIRQ, - IRQT_IPI, - IRQT_EVTCHN -}; - -/* Convenient shorthand for packed representation of an unbound IRQ. */ -#define IRQ_UNBOUND mk_irq_info(IRQT_UNBOUND, 0, 0) - -static int evtchn_to_irq[NR_EVENT_CHANNELS] = { - [0 ... NR_EVENT_CHANNELS-1] = -1 -}; -static unsigned long cpu_evtchn_mask[NR_CPUS][NR_EVENT_CHANNELS/BITS_PER_LONG]; -static u8 cpu_evtchn[NR_EVENT_CHANNELS]; - -/* Reference counts for bindings to IRQs. */ -static int irq_bindcount[NR_IRQS]; - -/* Xen will never allocate port zero for any purpose. */ -#define VALID_EVTCHN(chn) ((chn) != 0) - -/* - * Force a proper event-channel callback from Xen after clearing the - * callback mask. We do this in a very simple manner, by making a call - * down into Xen. The pending flag will be checked by Xen on return. - */ -void force_evtchn_callback(void) -{ - (void)HYPERVISOR_xen_version(0, NULL); -} -EXPORT_SYMBOL_GPL(force_evtchn_callback); - -static struct irq_chip xen_dynamic_chip; - -/* Constructor for packed IRQ information. */ -static inline struct packed_irq mk_irq_info(u32 type, u32 index, u32 evtchn) -{ - return (struct packed_irq) { evtchn, index, type }; -} - -/* - * Accessors for packed IRQ information. - */ -static inline unsigned int evtchn_from_irq(int irq) -{ - return irq_info[irq].evtchn; -} - -static inline unsigned int index_from_irq(int irq) -{ - return irq_info[irq].index; -} - -static inline unsigned int type_from_irq(int irq) -{ - return irq_info[irq].type; -} - -static inline unsigned long active_evtchns(unsigned int cpu, - struct shared_info *sh, - unsigned int idx) -{ - return (sh->evtchn_pending[idx] & - cpu_evtchn_mask[cpu][idx] & - ~sh->evtchn_mask[idx]); -} - -static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu) -{ - int irq = evtchn_to_irq[chn]; - - BUG_ON(irq == -1); -#ifdef CONFIG_SMP - irq_desc[irq].affinity = cpumask_of_cpu(cpu); -#endif - - __clear_bit(chn, cpu_evtchn_mask[cpu_evtchn[chn]]); - __set_bit(chn, cpu_evtchn_mask[cpu]); - - cpu_evtchn[chn] = cpu; -} - -static void init_evtchn_cpu_bindings(void) -{ -#ifdef CONFIG_SMP - int i; - /* By default all event channels notify CPU#0. */ - for (i = 0; i < NR_IRQS; i++) - irq_desc[i].affinity = cpumask_of_cpu(0); -#endif - - memset(cpu_evtchn, 0, sizeof(cpu_evtchn)); - memset(cpu_evtchn_mask[0], ~0, sizeof(cpu_evtchn_mask[0])); -} - -static inline unsigned int cpu_from_evtchn(unsigned int evtchn) -{ - return cpu_evtchn[evtchn]; -} - -static inline void clear_evtchn(int port) -{ - struct shared_info *s = HYPERVISOR_shared_info; - sync_clear_bit(port, &s->evtchn_pending[0]); -} - -static inline void set_evtchn(int port) -{ - struct shared_info *s = HYPERVISOR_shared_info; - sync_set_bit(port, &s->evtchn_pending[0]); -} - - -/** - * notify_remote_via_irq - send event to remote end of event channel via irq - * @irq: irq of event channel to send event to - * - * Unlike notify_remote_via_evtchn(), this is safe to use across - * save/restore. Notifications on a broken connection are silently - * dropped. - */ -void notify_remote_via_irq(int irq) -{ - int evtchn = evtchn_from_irq(irq); - - if (VALID_EVTCHN(evtchn)) - notify_remote_via_evtchn(evtchn); -} -EXPORT_SYMBOL_GPL(notify_remote_via_irq); - -static void mask_evtchn(int port) -{ - struct shared_info *s = HYPERVISOR_shared_info; - sync_set_bit(port, &s->evtchn_mask[0]); -} - -static void unmask_evtchn(int port) -{ - struct shared_info *s = HYPERVISOR_shared_info; - unsigned int cpu = get_cpu(); - - BUG_ON(!irqs_disabled()); - - /* Slow path (hypercall) if this is a non-local port. */ - if (unlikely(cpu != cpu_from_evtchn(port))) { - struct evtchn_unmask unmask = { .port = port }; - (void)HYPERVISOR_event_channel_op(EVTCHNOP_unmask, &unmask); - } else { - struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu); - - sync_clear_bit(port, &s->evtchn_mask[0]); - - /* - * The following is basically the equivalent of - * 'hw_resend_irq'. Just like a real IO-APIC we 'lose - * the interrupt edge' if the channel is masked. - */ - if (sync_test_bit(port, &s->evtchn_pending[0]) && - !sync_test_and_set_bit(port / BITS_PER_LONG, - &vcpu_info->evtchn_pending_sel)) - vcpu_info->evtchn_upcall_pending = 1; - } - - put_cpu(); -} - -static int find_unbound_irq(void) -{ - int irq; - - /* Only allocate from dynirq range */ - for (irq = 0; irq < NR_IRQS; irq++) - if (irq_bindcount[irq] == 0) - break; - - if (irq == NR_IRQS) - panic("No available IRQ to bind to: increase NR_IRQS!\n"); - - return irq; -} - -int bind_evtchn_to_irq(unsigned int evtchn) -{ - int irq; - - spin_lock(&irq_mapping_update_lock); - - irq = evtchn_to_irq[evtchn]; - - if (irq == -1) { - irq = find_unbound_irq(); - - dynamic_irq_init(irq); - set_irq_chip_and_handler_name(irq, &xen_dynamic_chip, - handle_level_irq, "event"); - - evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn); - } - - irq_bindcount[irq]++; - - spin_unlock(&irq_mapping_update_lock); - - return irq; -} -EXPORT_SYMBOL_GPL(bind_evtchn_to_irq); - -static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) -{ - struct evtchn_bind_ipi bind_ipi; - int evtchn, irq; - - spin_lock(&irq_mapping_update_lock); - - irq = per_cpu(ipi_to_irq, cpu)[ipi]; - if (irq == -1) { - irq = find_unbound_irq(); - if (irq < 0) - goto out; - - dynamic_irq_init(irq); - set_irq_chip_and_handler_name(irq, &xen_dynamic_chip, - handle_level_irq, "ipi"); - - bind_ipi.vcpu = cpu; - if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi, - &bind_ipi) != 0) - BUG(); - evtchn = bind_ipi.port; - - evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn); - - per_cpu(ipi_to_irq, cpu)[ipi] = irq; - - bind_evtchn_to_cpu(evtchn, cpu); - } - - irq_bindcount[irq]++; - - out: - spin_unlock(&irq_mapping_update_lock); - return irq; -} - - -static int bind_virq_to_irq(unsigned int virq, unsigned int cpu) -{ - struct evtchn_bind_virq bind_virq; - int evtchn, irq; - - spin_lock(&irq_mapping_update_lock); - - irq = per_cpu(virq_to_irq, cpu)[virq]; - - if (irq == -1) { - bind_virq.virq = virq; - bind_virq.vcpu = cpu; - if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq, - &bind_virq) != 0) - BUG(); - evtchn = bind_virq.port; - - irq = find_unbound_irq(); - - dynamic_irq_init(irq); - set_irq_chip_and_handler_name(irq, &xen_dynamic_chip, - handle_level_irq, "virq"); - - evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn); - - per_cpu(virq_to_irq, cpu)[virq] = irq; - - bind_evtchn_to_cpu(evtchn, cpu); - } - - irq_bindcount[irq]++; - - spin_unlock(&irq_mapping_update_lock); - - return irq; -} - -static void unbind_from_irq(unsigned int irq) -{ - struct evtchn_close close; - int evtchn = evtchn_from_irq(irq); - - spin_lock(&irq_mapping_update_lock); - - if (VALID_EVTCHN(evtchn) && (--irq_bindcount[irq] == 0)) { - close.port = evtchn; - if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0) - BUG(); - - switch (type_from_irq(irq)) { - case IRQT_VIRQ: - per_cpu(virq_to_irq, cpu_from_evtchn(evtchn)) - [index_from_irq(irq)] = -1; - break; - default: - break; - } - - /* Closed ports are implicitly re-bound to VCPU0. */ - bind_evtchn_to_cpu(evtchn, 0); - - evtchn_to_irq[evtchn] = -1; - irq_info[irq] = IRQ_UNBOUND; - - dynamic_irq_init(irq); - } - - spin_unlock(&irq_mapping_update_lock); -} - -int bind_evtchn_to_irqhandler(unsigned int evtchn, - irq_handler_t handler, - unsigned long irqflags, - const char *devname, void *dev_id) -{ - unsigned int irq; - int retval; - - irq = bind_evtchn_to_irq(evtchn); - retval = request_irq(irq, handler, irqflags, devname, dev_id); - if (retval != 0) { - unbind_from_irq(irq); - return retval; - } - - return irq; -} -EXPORT_SYMBOL_GPL(bind_evtchn_to_irqhandler); - -int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu, - irq_handler_t handler, - unsigned long irqflags, const char *devname, void *dev_id) -{ - unsigned int irq; - int retval; - - irq = bind_virq_to_irq(virq, cpu); - retval = request_irq(irq, handler, irqflags, devname, dev_id); - if (retval != 0) { - unbind_from_irq(irq); - return retval; - } - - return irq; -} -EXPORT_SYMBOL_GPL(bind_virq_to_irqhandler); - -int bind_ipi_to_irqhandler(enum ipi_vector ipi, - unsigned int cpu, - irq_handler_t handler, - unsigned long irqflags, - const char *devname, - void *dev_id) -{ - int irq, retval; - - irq = bind_ipi_to_irq(ipi, cpu); - if (irq < 0) - return irq; - - retval = request_irq(irq, handler, irqflags, devname, dev_id); - if (retval != 0) { - unbind_from_irq(irq); - return retval; - } - - return irq; -} - -void unbind_from_irqhandler(unsigned int irq, void *dev_id) -{ - free_irq(irq, dev_id); - unbind_from_irq(irq); -} -EXPORT_SYMBOL_GPL(unbind_from_irqhandler); - -void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) -{ - int irq = per_cpu(ipi_to_irq, cpu)[vector]; - BUG_ON(irq < 0); - notify_remote_via_irq(irq); -} - - -/* - * Search the CPUs pending events bitmasks. For each one found, map - * the event number to an irq, and feed it into do_IRQ() for - * handling. - * - * Xen uses a two-level bitmap to speed searching. The first level is - * a bitset of words which contain pending event bits. The second - * level is a bitset of pending events themselves. - */ -void xen_evtchn_do_upcall(struct pt_regs *regs) -{ - int cpu = get_cpu(); - struct shared_info *s = HYPERVISOR_shared_info; - struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu); - unsigned long pending_words; - - vcpu_info->evtchn_upcall_pending = 0; - - /* NB. No need for a barrier here -- XCHG is a barrier on x86. */ - pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0); - while (pending_words != 0) { - unsigned long pending_bits; - int word_idx = __ffs(pending_words); - pending_words &= ~(1UL << word_idx); - - while ((pending_bits = active_evtchns(cpu, s, word_idx)) != 0) { - int bit_idx = __ffs(pending_bits); - int port = (word_idx * BITS_PER_LONG) + bit_idx; - int irq = evtchn_to_irq[port]; - - if (irq != -1) { - regs->orig_ax = ~irq; - do_IRQ(regs); - } - } - } - - put_cpu(); -} - -/* Rebind an evtchn so that it gets delivered to a specific cpu */ -static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu) -{ - struct evtchn_bind_vcpu bind_vcpu; - int evtchn = evtchn_from_irq(irq); - - if (!VALID_EVTCHN(evtchn)) - return; - - /* Send future instances of this interrupt to other vcpu. */ - bind_vcpu.port = evtchn; - bind_vcpu.vcpu = tcpu; - - /* - * If this fails, it usually just indicates that we're dealing with a - * virq or IPI channel, which don't actually need to be rebound. Ignore - * it, but don't do the xenlinux-level rebind in that case. - */ - if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0) - bind_evtchn_to_cpu(evtchn, tcpu); -} - - -static void set_affinity_irq(unsigned irq, cpumask_t dest) -{ - unsigned tcpu = first_cpu(dest); - rebind_irq_to_cpu(irq, tcpu); -} - -static void enable_dynirq(unsigned int irq) -{ - int evtchn = evtchn_from_irq(irq); - - if (VALID_EVTCHN(evtchn)) - unmask_evtchn(evtchn); -} - -static void disable_dynirq(unsigned int irq) -{ - int evtchn = evtchn_from_irq(irq); - - if (VALID_EVTCHN(evtchn)) - mask_evtchn(evtchn); -} - -static void ack_dynirq(unsigned int irq) -{ - int evtchn = evtchn_from_irq(irq); - - move_native_irq(irq); - - if (VALID_EVTCHN(evtchn)) - clear_evtchn(evtchn); -} - -static int retrigger_dynirq(unsigned int irq) -{ - int evtchn = evtchn_from_irq(irq); - int ret = 0; - - if (VALID_EVTCHN(evtchn)) { - set_evtchn(evtchn); - ret = 1; - } - - return ret; -} - -static struct irq_chip xen_dynamic_chip __read_mostly = { - .name = "xen-dyn", - .mask = disable_dynirq, - .unmask = enable_dynirq, - .ack = ack_dynirq, - .set_affinity = set_affinity_irq, - .retrigger = retrigger_dynirq, -}; - -void __init xen_init_IRQ(void) -{ - int i; - - init_evtchn_cpu_bindings(); - - /* No event channels are 'live' right now. */ - for (i = 0; i < NR_EVENT_CHANNELS; i++) - mask_evtchn(i); - - /* Dynamic IRQ space is currently unbound. Zero the refcnts. */ - for (i = 0; i < NR_IRQS; i++) - irq_bindcount[i] = 0; - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/xen/features.c b/arch/x86/xen/features.c deleted file mode 100644 index 0707714e40d6..000000000000 --- a/arch/x86/xen/features.c +++ /dev/null @@ -1,29 +0,0 @@ -/****************************************************************************** - * features.c - * - * Xen feature flags. - * - * Copyright (c) 2006, Ian Campbell, XenSource Inc. - */ -#include <linux/types.h> -#include <linux/cache.h> -#include <linux/module.h> -#include <asm/xen/hypervisor.h> -#include <xen/features.h> - -u8 xen_features[XENFEAT_NR_SUBMAPS * 32] __read_mostly; -EXPORT_SYMBOL_GPL(xen_features); - -void xen_setup_features(void) -{ - struct xen_feature_info fi; - int i, j; - - for (i = 0; i < XENFEAT_NR_SUBMAPS; i++) { - fi.submap_idx = i; - if (HYPERVISOR_xen_version(XENVER_get_features, &fi) < 0) - break; - for (j = 0; j < 32; j++) - xen_features[i * 32 + j] = !!(fi.submap & 1<<j); - } -} diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c new file mode 100644 index 000000000000..49ba9b5224d1 --- /dev/null +++ b/arch/x86/xen/grant-table.c @@ -0,0 +1,91 @@ +/****************************************************************************** + * grant_table.c + * x86 specific part + * + * Granting foreign access to our memory reservation. + * + * Copyright (c) 2005-2006, Christopher Clark + * Copyright (c) 2004-2005, K A Fraser + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan. Split out x86 specific part. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; or, when distributed + * separately from the Linux kernel or incorporated into other + * software packages, subject to the following license: + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this source file (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> + +#include <xen/interface/xen.h> +#include <xen/page.h> +#include <xen/grant_table.h> + +#include <asm/pgtable.h> + +static int map_pte_fn(pte_t *pte, struct page *pmd_page, + unsigned long addr, void *data) +{ + unsigned long **frames = (unsigned long **)data; + + set_pte_at(&init_mm, addr, pte, mfn_pte((*frames)[0], PAGE_KERNEL)); + (*frames)++; + return 0; +} + +static int unmap_pte_fn(pte_t *pte, struct page *pmd_page, + unsigned long addr, void *data) +{ + + set_pte_at(&init_mm, addr, pte, __pte(0)); + return 0; +} + +int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, + unsigned long max_nr_gframes, + struct grant_entry **__shared) +{ + int rc; + struct grant_entry *shared = *__shared; + + if (shared == NULL) { + struct vm_struct *area = + xen_alloc_vm_area(PAGE_SIZE * max_nr_gframes); + BUG_ON(area == NULL); + shared = area->addr; + *__shared = shared; + } + + rc = apply_to_page_range(&init_mm, (unsigned long)shared, + PAGE_SIZE * nr_gframes, + map_pte_fn, &frames); + return rc; +} + +void arch_gnttab_unmap_shared(struct grant_entry *shared, + unsigned long nr_gframes) +{ + apply_to_page_range(&init_mm, (unsigned long)shared, + PAGE_SIZE * nr_gframes, unmap_pte_fn, NULL); +} diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 2a054ef2a3da..6cbcf65609ad 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -156,6 +156,10 @@ void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags) void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { + /* updates to init_mm may be done without lock */ + if (mm == &init_mm) + preempt_disable(); + if (mm == current->mm || mm == &init_mm) { if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) { struct multicall_space mcs; @@ -163,14 +167,61 @@ void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, MULTI_update_va_mapping(mcs.mc, addr, pteval, 0); xen_mc_issue(PARAVIRT_LAZY_MMU); - return; + goto out; } else if (HYPERVISOR_update_va_mapping(addr, pteval, 0) == 0) - return; + goto out; } xen_set_pte(ptep, pteval); + +out: + if (mm == &init_mm) + preempt_enable(); +} + +pteval_t xen_pte_val(pte_t pte) +{ + pteval_t ret = pte.pte; + + if (ret & _PAGE_PRESENT) + ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; + + return ret; +} + +pgdval_t xen_pgd_val(pgd_t pgd) +{ + pgdval_t ret = pgd.pgd; + if (ret & _PAGE_PRESENT) + ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; + return ret; +} + +pte_t xen_make_pte(pteval_t pte) +{ + if (pte & _PAGE_PRESENT) { + pte = phys_to_machine(XPADDR(pte)).maddr; + pte &= ~(_PAGE_PCD | _PAGE_PWT); + } + + return (pte_t){ .pte = pte }; } +pgd_t xen_make_pgd(pgdval_t pgd) +{ + if (pgd & _PAGE_PRESENT) + pgd = phys_to_machine(XPADDR(pgd)).maddr; + + return (pgd_t){ pgd }; +} + +pmdval_t xen_pmd_val(pmd_t pmd) +{ + pmdval_t ret = native_pmd_val(pmd); + if (ret & _PAGE_PRESENT) + ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; + return ret; +} #ifdef CONFIG_X86_PAE void xen_set_pud(pud_t *ptr, pud_t val) { @@ -214,100 +265,18 @@ void xen_pmd_clear(pmd_t *pmdp) xen_set_pmd(pmdp, __pmd(0)); } -unsigned long long xen_pte_val(pte_t pte) +pmd_t xen_make_pmd(pmdval_t pmd) { - unsigned long long ret = 0; - - if (pte.pte_low) { - ret = ((unsigned long long)pte.pte_high << 32) | pte.pte_low; - ret = machine_to_phys(XMADDR(ret)).paddr | 1; - } - - return ret; -} - -unsigned long long xen_pmd_val(pmd_t pmd) -{ - unsigned long long ret = pmd.pmd; - if (ret) - ret = machine_to_phys(XMADDR(ret)).paddr | 1; - return ret; -} - -unsigned long long xen_pgd_val(pgd_t pgd) -{ - unsigned long long ret = pgd.pgd; - if (ret) - ret = machine_to_phys(XMADDR(ret)).paddr | 1; - return ret; -} - -pte_t xen_make_pte(unsigned long long pte) -{ - if (pte & _PAGE_PRESENT) { - pte = phys_to_machine(XPADDR(pte)).maddr; - pte &= ~(_PAGE_PCD | _PAGE_PWT); - } - - return (pte_t){ .pte = pte }; -} - -pmd_t xen_make_pmd(unsigned long long pmd) -{ - if (pmd & 1) + if (pmd & _PAGE_PRESENT) pmd = phys_to_machine(XPADDR(pmd)).maddr; - return (pmd_t){ pmd }; -} - -pgd_t xen_make_pgd(unsigned long long pgd) -{ - if (pgd & _PAGE_PRESENT) - pgd = phys_to_machine(XPADDR(pgd)).maddr; - - return (pgd_t){ pgd }; + return native_make_pmd(pmd); } #else /* !PAE */ void xen_set_pte(pte_t *ptep, pte_t pte) { *ptep = pte; } - -unsigned long xen_pte_val(pte_t pte) -{ - unsigned long ret = pte.pte_low; - - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr; - - return ret; -} - -unsigned long xen_pgd_val(pgd_t pgd) -{ - unsigned long ret = pgd.pgd; - if (ret) - ret = machine_to_phys(XMADDR(ret)).paddr | 1; - return ret; -} - -pte_t xen_make_pte(unsigned long pte) -{ - if (pte & _PAGE_PRESENT) { - pte = phys_to_machine(XPADDR(pte)).maddr; - pte &= ~(_PAGE_PCD | _PAGE_PWT); - } - - return (pte_t){ pte }; -} - -pgd_t xen_make_pgd(unsigned long pgd) -{ - if (pgd & _PAGE_PRESENT) - pgd = phys_to_machine(XPADDR(pgd)).maddr; - - return (pgd_t){ pgd }; -} #endif /* CONFIG_X86_PAE */ /* diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 2341492bf7a0..82517e4a752a 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -16,6 +16,7 @@ #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <xen/interface/callback.h> #include <xen/interface/physdev.h> #include <xen/features.h> @@ -68,6 +69,24 @@ static void __init fiddle_vdso(void) *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT; } +void xen_enable_sysenter(void) +{ + int cpu = smp_processor_id(); + extern void xen_sysenter_target(void); + /* Mask events on entry, even though they get enabled immediately */ + static struct callback_register sysenter = { + .type = CALLBACKTYPE_sysenter, + .address = { __KERNEL_CS, (unsigned long)xen_sysenter_target }, + .flags = CALLBACKF_mask_events, + }; + + if (!boot_cpu_has(X86_FEATURE_SEP) || + HYPERVISOR_callback_op(CALLBACKOP_register, &sysenter) != 0) { + clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP); + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP); + } +} + void __init xen_arch_setup(void) { struct physdev_set_iopl set_iopl; @@ -82,6 +101,8 @@ void __init xen_arch_setup(void) HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback, __KERNEL_CS, (unsigned long)xen_failsafe_callback); + xen_enable_sysenter(); + set_iopl.iopl = 1; rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); if (rc != 0) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index e340ff92f6b6..92dd3dbf3ffb 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -36,8 +36,9 @@ #include "mmu.h" static cpumask_t xen_cpu_initialized_map; -static DEFINE_PER_CPU(int, resched_irq); -static DEFINE_PER_CPU(int, callfunc_irq); +static DEFINE_PER_CPU(int, resched_irq) = -1; +static DEFINE_PER_CPU(int, callfunc_irq) = -1; +static DEFINE_PER_CPU(int, debug_irq) = -1; /* * Structure and data for smp_call_function(). This is designed to minimise @@ -72,6 +73,7 @@ static __cpuinit void cpu_bringup_and_idle(void) int cpu = smp_processor_id(); cpu_init(); + xen_enable_sysenter(); preempt_disable(); per_cpu(cpu_state, cpu) = CPU_ONLINE; @@ -88,9 +90,7 @@ static __cpuinit void cpu_bringup_and_idle(void) static int xen_smp_intr_init(unsigned int cpu) { int rc; - const char *resched_name, *callfunc_name; - - per_cpu(resched_irq, cpu) = per_cpu(callfunc_irq, cpu) = -1; + const char *resched_name, *callfunc_name, *debug_name; resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu); rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR, @@ -114,6 +114,14 @@ static int xen_smp_intr_init(unsigned int cpu) goto fail; per_cpu(callfunc_irq, cpu) = rc; + debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu); + rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, xen_debug_interrupt, + IRQF_DISABLED | IRQF_PERCPU | IRQF_NOBALANCING, + debug_name, NULL); + if (rc < 0) + goto fail; + per_cpu(debug_irq, cpu) = rc; + return 0; fail: @@ -121,6 +129,8 @@ static int xen_smp_intr_init(unsigned int cpu) unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL); if (per_cpu(callfunc_irq, cpu) >= 0) unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL); + if (per_cpu(debug_irq, cpu) >= 0) + unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL); return rc; } diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S index fe161ed4b01e..2497a30f41de 100644 --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -108,6 +108,20 @@ ENDPATCH(xen_restore_fl_direct) RELOC(xen_restore_fl_direct, 2b+1) /* + We can't use sysexit directly, because we're not running in ring0. + But we can easily fake it up using iret. Assuming xen_sysexit + is jumped to with a standard stack frame, we can just strip it + back to a standard iret frame and use iret. + */ +ENTRY(xen_sysexit) + movl PT_EAX(%esp), %eax /* Shouldn't be necessary? */ + orl $X86_EFLAGS_IF, PT_EFLAGS(%esp) + lea PT_EIP(%esp), %esp + + jmp xen_iret +ENDPROC(xen_sysexit) + +/* This is run where a normal iret would be run, with the same stack setup: 8: eflags 4: cs @@ -184,8 +198,12 @@ iret_restore_end: region is OK. */ je xen_hypervisor_callback - iret +1: iret xen_iret_end_crit: +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous hyper_iret: /* put this out of line since its very rarely used */ @@ -219,9 +237,7 @@ hyper_iret: ds } SAVE_ALL state eax } : : - ebx } - ---------------- - return addr <- esp + ebx }<- esp ---------------- In order to deliver the nested exception properly, we need to shift @@ -236,10 +252,8 @@ hyper_iret: it's usermode state which we eventually need to restore. */ ENTRY(xen_iret_crit_fixup) - /* offsets +4 for return address */ - /* - Paranoia: Make sure we're really coming from userspace. + Paranoia: Make sure we're really coming from kernel space. One could imagine a case where userspace jumps into the critical range address, but just before the CPU delivers a GP, it decides to deliver an interrupt instead. Unlikely? @@ -248,32 +262,32 @@ ENTRY(xen_iret_crit_fixup) jump instruction itself, not the destination, but some virtual environments get this wrong. */ - movl PT_CS+4(%esp), %ecx + movl PT_CS(%esp), %ecx andl $SEGMENT_RPL_MASK, %ecx cmpl $USER_RPL, %ecx je 2f - lea PT_ORIG_EAX+4(%esp), %esi - lea PT_EFLAGS+4(%esp), %edi + lea PT_ORIG_EAX(%esp), %esi + lea PT_EFLAGS(%esp), %edi /* If eip is before iret_restore_end then stack hasn't been restored yet. */ cmp $iret_restore_end, %eax jae 1f - movl 0+4(%edi),%eax /* copy EAX */ - movl %eax, PT_EAX+4(%esp) + movl 0+4(%edi),%eax /* copy EAX (just above top of frame) */ + movl %eax, PT_EAX(%esp) lea ESP_OFFSET(%edi),%edi /* move dest up over saved regs */ /* set up the copy */ 1: std - mov $(PT_EIP+4) / 4, %ecx /* copy ret+saved regs up to orig_eax */ + mov $PT_EIP / 4, %ecx /* saved regs up to orig_eax */ rep movsl cld lea 4(%edi),%esp /* point esp to new frame */ -2: ret +2: jmp xen_do_upcall /* diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 956a491ea998..f1063ae08037 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -2,6 +2,8 @@ #define XEN_OPS_H #include <linux/init.h> +#include <linux/irqreturn.h> +#include <xen/xen-ops.h> /* These are code, but not functions. Defined in entry.S */ extern const char xen_hypervisor_callback[]; @@ -9,7 +11,6 @@ extern const char xen_failsafe_callback[]; void xen_copy_trap_info(struct trap_info *traps); -DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu); DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); @@ -19,6 +20,7 @@ extern struct shared_info *HYPERVISOR_shared_info; char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); +void xen_enable_sysenter(void); void xen_setup_timer(int cpu); void xen_setup_cpu_clockevents(void); @@ -28,6 +30,8 @@ unsigned long xen_get_wallclock(void); int xen_set_wallclock(unsigned long time); unsigned long long xen_sched_clock(void); +irqreturn_t xen_debug_interrupt(int irq, void *dev_id); + bool xen_vcpu_stolen(int vcpu); void xen_mark_init_mm_pinned(void); @@ -64,4 +68,6 @@ DECL_ASM(unsigned long, xen_save_fl_direct, void); DECL_ASM(void, xen_restore_fl_direct, unsigned long); void xen_iret(void); +void xen_sysexit(void); + #endif /* XEN_OPS_H */ |