summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-ifc6410.dts26
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi36
-rw-r--r--arch/powerpc/kernel/eeh_driver.c2
-rw-r--r--arch/powerpc/kernel/pci_of_scan.c3
-rw-r--r--arch/x86/include/asm/pci_x86.h10
-rw-r--r--arch/x86/pci/pcbios.c108
6 files changed, 106 insertions, 79 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608b6d50..955c697b4dd4 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -47,6 +47,18 @@
bias-disable;
};
};
+
+ pcie_pins: pcie_pinmux {
+ mux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+ conf {
+ pins = "gpio27";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
};
rpm@108000 {
@@ -123,6 +135,10 @@
pm8921_lvs1: lvs1 {
bias-pull-down;
};
+
+ lvs6 {
+ bias-pull-down;
+ };
};
};
@@ -231,6 +247,16 @@
status = "okay";
};
+ pci@1b500000 {
+ status = "ok";
+ vdda-supply = <&pm8921_s3>;
+ vdda_phy-supply = <&pm8921_lvs6>;
+ vdda_refclk-supply = <&ext_3p3v>;
+ pinctrl-0 = <&pcie_pins>;
+ pinctrl-names = "default";
+ perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+ };
+
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a4c1762b53ea..847150fbfdbf 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -659,5 +659,41 @@
compatible = "qcom,tcsr-apq8064", "syscon";
reg = <0x1a400000 0x100>;
};
+
+ pcie: pci@1b500000 {
+ compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
+ 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+ interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_REF_CLK>;
+ clock-names = "core", "iface", "phy";
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy";
+ status = "disabled";
+ };
};
};
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 80dfe8965df9..44bca7892f66 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -400,7 +400,7 @@ static void *eeh_rmv_device(void *data, void *userdata)
* support EEH. So we just care about PCI devices for
* simplicity here.
*/
- if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+ if (!dev || (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE))
return NULL;
/*
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 2e710c15893f..526ac6750e4d 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -187,9 +187,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
pci_device_add(dev, bus);
- /* Setup MSI caps & disable MSI/MSI-X interrupts */
- pci_msi_setup_pci_dev(dev);
-
return dev;
}
EXPORT_SYMBOL(of_create_pci_dev);
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index fa1195dae425..46873fbd44e1 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -151,11 +151,11 @@ extern struct list_head pci_mmcfg_list;
#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
/*
- * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
- * on their northbrige except through the * %eax register. As such, you MUST
- * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
- * accessor functions.
- * In fact just use pci_config_*, nothing else please.
+ * On AMD Fam10h CPUs, all PCI MMIO configuration space accesses must use
+ * %eax. No other source or target registers may be used. The following
+ * mmio_config_* accessors enforce this. See "BIOS and Kernel Developer's
+ * Guide (BKDG) For AMD Family 10h Processors", rev. 3.48, sec 2.11.1,
+ * "MMIO Configuration Coding Requirements".
*/
static inline unsigned char mmio_config_readb(void __iomem *pos)
{
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9b83b9051ae7..9770e55e768f 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -180,6 +180,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
unsigned long result = 0;
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ u16 number = 0, mask = 0;
WARN_ON(seg);
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
@@ -189,53 +190,35 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
switch (len) {
case 1:
- __asm__("lcall *(%%esi); cld\n\t"
- "jc 1f\n\t"
- "xor %%ah, %%ah\n"
- "1:"
- : "=c" (*value),
- "=a" (result)
- : "1" (PCIBIOS_READ_CONFIG_BYTE),
- "b" (bx),
- "D" ((long)reg),
- "S" (&pci_indirect));
- /*
- * Zero-extend the result beyond 8 bits, do not trust the
- * BIOS having done it:
- */
- *value &= 0xff;
+ number = PCIBIOS_READ_CONFIG_BYTE;
+ mask = 0xff;
break;
case 2:
- __asm__("lcall *(%%esi); cld\n\t"
- "jc 1f\n\t"
- "xor %%ah, %%ah\n"
- "1:"
- : "=c" (*value),
- "=a" (result)
- : "1" (PCIBIOS_READ_CONFIG_WORD),
- "b" (bx),
- "D" ((long)reg),
- "S" (&pci_indirect));
- /*
- * Zero-extend the result beyond 16 bits, do not trust the
- * BIOS having done it:
- */
- *value &= 0xffff;
+ number = PCIBIOS_READ_CONFIG_WORD;
+ mask = 0xffff;
break;
case 4:
- __asm__("lcall *(%%esi); cld\n\t"
- "jc 1f\n\t"
- "xor %%ah, %%ah\n"
- "1:"
- : "=c" (*value),
- "=a" (result)
- : "1" (PCIBIOS_READ_CONFIG_DWORD),
- "b" (bx),
- "D" ((long)reg),
- "S" (&pci_indirect));
+ number = PCIBIOS_READ_CONFIG_DWORD;
break;
}
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=c" (*value),
+ "=a" (result)
+ : "1" (number),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ /*
+ * Zero-extend the result beyond 8 or 16 bits, do not trust the
+ * BIOS having done it:
+ */
+ if (mask)
+ *value &= mask;
+
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
return (int)((result & 0xff00) >> 8);
@@ -247,6 +230,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
unsigned long result = 0;
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ u16 number = 0;
WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
@@ -256,43 +240,27 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
switch (len) {
case 1:
- __asm__("lcall *(%%esi); cld\n\t"
- "jc 1f\n\t"
- "xor %%ah, %%ah\n"
- "1:"
- : "=a" (result)
- : "0" (PCIBIOS_WRITE_CONFIG_BYTE),
- "c" (value),
- "b" (bx),
- "D" ((long)reg),
- "S" (&pci_indirect));
+ number = PCIBIOS_WRITE_CONFIG_BYTE;
break;
case 2:
- __asm__("lcall *(%%esi); cld\n\t"
- "jc 1f\n\t"
- "xor %%ah, %%ah\n"
- "1:"
- : "=a" (result)
- : "0" (PCIBIOS_WRITE_CONFIG_WORD),
- "c" (value),
- "b" (bx),
- "D" ((long)reg),
- "S" (&pci_indirect));
+ number = PCIBIOS_WRITE_CONFIG_WORD;
break;
case 4:
- __asm__("lcall *(%%esi); cld\n\t"
- "jc 1f\n\t"
- "xor %%ah, %%ah\n"
- "1:"
- : "=a" (result)
- : "0" (PCIBIOS_WRITE_CONFIG_DWORD),
- "c" (value),
- "b" (bx),
- "D" ((long)reg),
- "S" (&pci_indirect));
+ number = PCIBIOS_WRITE_CONFIG_DWORD;
break;
}
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=a" (result)
+ : "0" (number),
+ "c" (value),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
return (int)((result & 0xff00) >> 8);
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-04 18:10:59 +0100