diff options
Diffstat (limited to 'arch')
508 files changed, 13470 insertions, 8327 deletions
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index c645c5e14786..2b245ad731ee 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -182,7 +182,6 @@ EXPORT_SYMBOL(smp_num_cpus); EXPORT_SYMBOL(smp_call_function); EXPORT_SYMBOL(smp_call_function_on_cpu); EXPORT_SYMBOL(_atomic_dec_and_lock); -EXPORT_SYMBOL(cpu_present_mask); #endif /* CONFIG_SMP */ /* diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 9924fd07743a..c760a831fd1a 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -94,7 +94,7 @@ common_shutdown_1(void *generic_ptr) if (cpuid != boot_cpuid) { flags |= 0x00040000UL; /* "remain halted" */ *pflags = flags; - clear_bit(cpuid, &cpu_present_mask); + cpu_clear(cpuid, cpu_present_map); halt(); } #endif @@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr) #ifdef CONFIG_SMP /* Wait for the secondaries to halt. */ - cpu_clear(boot_cpuid, cpu_possible_map); - while (cpus_weight(cpu_possible_map)) + cpu_clear(boot_cpuid, cpu_present_map); + while (cpus_weight(cpu_present_map)) barrier(); #endif diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 185255416e85..4dc273e537fd 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -68,7 +68,6 @@ enum ipi_message_type { static int smp_secondary_alive __initdata = 0; /* Which cpus ids came online. */ -cpumask_t cpu_present_mask; cpumask_t cpu_online_map; EXPORT_SYMBOL(cpu_online_map); @@ -439,7 +438,7 @@ setup_smp(void) if ((cpu->flags & 0x1cc) == 0x1cc) { smp_num_probed++; /* Assume here that "whami" == index */ - cpu_set(i, cpu_present_mask); + cpu_set(i, cpu_present_map); cpu->pal_revision = boot_cpu_palrev; } @@ -450,11 +449,10 @@ setup_smp(void) } } else { smp_num_probed = 1; - cpu_set(boot_cpuid, cpu_present_mask); } - printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n", - smp_num_probed, cpu_possible_map.bits[0]); + printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n", + smp_num_probed, cpu_present_map.bits[0]); } /* @@ -473,7 +471,7 @@ smp_prepare_cpus(unsigned int max_cpus) /* Nothing to do on a UP box, or when told not to. */ if (smp_num_probed == 1 || max_cpus == 0) { - cpu_present_mask = cpumask_of_cpu(boot_cpuid); + cpu_present_map = cpumask_of_cpu(boot_cpuid); printk(KERN_INFO "SMP mode deactivated.\n"); return; } @@ -486,10 +484,6 @@ smp_prepare_cpus(unsigned int max_cpus) void __devinit smp_prepare_boot_cpu(void) { - /* - * Mark the boot cpu (current cpu) as online - */ - cpu_set(smp_processor_id(), cpu_online_map); } int __devinit diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 5f84417eeb7b..2551fb49ae09 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -66,7 +66,7 @@ titan_update_irq_hw(unsigned long mask) register int bcpu = boot_cpuid; #ifdef CONFIG_SMP - cpumask_t cpm = cpu_present_mask; + cpumask_t cpm = cpu_present_map; volatile unsigned long *dim0, *dim1, *dim2, *dim3; unsigned long mask0, mask1, mask2, mask3, dummy; diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S index 338551c7113c..bbdef1be5f95 100644 --- a/arch/alpha/lib/strncpy.S +++ b/arch/alpha/lib/strncpy.S @@ -43,8 +43,8 @@ strncpy: .align 4 $multiword: - subq $24, 1, $2 # clear the final bits in the prev word - or $2, $24, $2 + subq $27, 1, $2 # clear the final bits in the prev word + or $2, $27, $2 zapnot $1, $2, $1 subq $18, 1, $18 @@ -70,8 +70,8 @@ $multiword: bne $18, 0b 1: ldq_u $1, 0($16) # clear the leading bits in the final word - subq $27, 1, $2 - or $2, $27, $2 + subq $24, 1, $2 + or $2, $24, $2 zap $1, $2, $1 stq_u $1, 0($16) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1dbf6ddb300d..08b7cc900cae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -150,8 +150,6 @@ config ARCH_IOP3XX config ARCH_IXP4XX bool "IXP4xx-based" - select DMABOUNCE - select PCI help Support for Intel's IXP4XX (XScale) family of processors. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5d3acff8c596..d22f38b957db 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART help Choice for UART for kernel low-level using S3C2410 UARTS, should be between zero and two. The port must have been - initalised by the boot-loader before use. + initialised by the boot-loader before use. The uncompressor code port configuration is now handled by CONFIG_S3C2410_LOWLEVEL_UART_PORT. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 95a96275f88a..6f8e84c1c1f2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -66,7 +66,7 @@ tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) - tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) -CFLAGS_ABI :=-mabi=aapcs -mno-thumb-interwork +CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork else CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) endif diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 0af3772efcb7..ace3fb5835d9 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -38,10 +38,10 @@ static void icedcc_putc(int ch) if (--i < 0) return; - asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status)); + asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status)); } while (status & 2); - asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch)); + asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch)); } #define putc(ch) icedcc_putc(ch) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 5e830f444c6c..314ebd3a1d71 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -18,6 +18,18 @@ #include <asm/io.h> #include <asm/hardware/scoop.h> +/* PCMCIA to Scoop linkage + + There is no easy way to link multiple scoop devices into one + single entity for the pxa2xx_pcmcia device so this structure + is used which is setup by the platform code. + + This file is never modular so this symbol is always + accessile to the board support files. +*/ +struct scoop_pcmcia_config *platform_scoop_config; +EXPORT_SYMBOL(platform_scoop_config); + #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) struct scoop_dev { diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index c9aa878e610a..074c47a4fb2e 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -1,21 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 16:55:14 2005 +# Linux kernel version: 2.6.17-rc1 +# Fri Apr 14 19:09:52 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # @@ -23,45 +23,58 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_BASE_FULL=y +CONFIG_ELF_CORE=y +# CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_EPOLL is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_SLAB is not set +CONFIG_DOUBLEFAULT=y # CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +CONFIG_BASE_SMALL=1 +CONFIG_SLOB=y +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type @@ -70,11 +83,13 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -84,9 +99,11 @@ CONFIG_ARCH_SA1100=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set # # SA11x0 Implementations @@ -128,20 +145,32 @@ CONFIG_SHARP_SCOOP=y # Bus support # CONFIG_ISA=y -CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA_DEBUG=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_SA1100=y # # Kernel Features # -# CONFIG_SMP is not set -CONFIG_PREEMPT=y +# CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=2 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -150,6 +179,7 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -158,7 +188,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1" # CONFIG_XIP_KERNEL is not set # @@ -181,14 +211,16 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set # # Power management options # CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set CONFIG_APM=y # @@ -199,6 +231,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -211,16 +244,19 @@ CONFIG_IP_FIB_HASH=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -232,6 +268,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -244,8 +285,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -265,10 +309,15 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -287,32 +336,49 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I1 is not set +# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I4=y # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set CONFIG_MTD_OBSOLETE_CHIPS=y CONFIG_MTD_SHARP=y +# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_SA1100=y +# CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_PLATRAM is not set # @@ -321,7 +387,6 @@ CONFIG_MTD_SHARP=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -337,6 +402,11 @@ CONFIG_MTD_SHARP=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -349,7 +419,6 @@ CONFIG_MTD_SHARP=y # # Block devices # -# CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -359,20 +428,35 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# ATA/ATAPI/MFM/RLL support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y # -# ATA/ATAPI/MFM/RLL support +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes # -# CONFIG_IDE is not set +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -402,6 +486,39 @@ CONFIG_ATA_OVER_ETH=m # Network device support # # CONFIG_NETDEVICES is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -424,7 +541,7 @@ CONFIG_INPUT_TSDEV=y CONFIG_INPUT_TSDEV_SCREEN_X=240 CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y +# CONFIG_INPUT_EVBUG is not set # # Input Device Drivers @@ -438,7 +555,11 @@ CONFIG_KEYBOARD_LOCOMO=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_INPUT_MISC is not set # @@ -461,7 +582,16 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_CS=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support @@ -483,94 +613,48 @@ CONFIG_UNIX98_PTYS=y # # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# PCMCIA character devices # +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set # -# I2C support +# TPM devices # -CONFIG_I2C=m -# CONFIG_I2C_CHARDEV is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # -# I2C Algorithms +# I2C support # -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C is not set # -# I2C Hardware Bus support +# SPI support # -# CONFIG_I2C_ELEKTOR is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # -# Miscellaneous I2C Chip support +# Dallas's 1-wire bus # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_W1 is not set # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -579,42 +663,33 @@ CONFIG_HWMON=y # # Multimedia Capabilities Port drivers # -# CONFIG_MCP_SA11X0 is not set +CONFIG_MCP=y +CONFIG_MCP_SA11X0=y +CONFIG_MCP_UCB1200=y +CONFIG_MCP_UCB1200_TS=y # -# Multimedia devices +# LED devices # -CONFIG_VIDEO_DEV=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# Video For Linux +# LED drivers # +CONFIG_LEDS_LOCOMO=y # -# Video Adapters +# LED Triggers # -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y # -# Radio Adapters +# Multimedia devices # -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices @@ -628,8 +703,8 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set +# CONFIG_FB_FIRMWARE_EDID is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_SA1100=y @@ -643,14 +718,15 @@ CONFIG_FB_SA1100=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y -CONFIG_FONT_8x8=y +# CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set +CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set @@ -659,7 +735,11 @@ CONFIG_FONT_8x8=y # Logo configuration # # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y # # Sound @@ -671,20 +751,17 @@ CONFIG_FONT_8x8=y # CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_GADGET is not set # # MMC/SD Card support @@ -692,23 +769,24 @@ CONFIG_USB_GADGET=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set @@ -725,7 +803,7 @@ CONFIG_INOTIFY=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -739,7 +817,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -755,11 +833,12 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -789,7 +868,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -813,7 +892,7 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -826,7 +905,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m +# CONFIG_NLS_UTF8 is not set # # Profiling support @@ -837,20 +916,23 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -874,7 +956,7 @@ CONFIG_DEBUG_ERRORS=y # # Library routines # -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 8dcc8e8ec813..b69e88bbc909 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Mon Mar 20 14:54:51 2006 +# Linux kernel version: 2.6.17-rc2 +# Wed Apr 19 21:21:01 2006 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 # # Code maturity level options @@ -28,6 +30,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -43,10 +46,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -59,7 +58,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -67,6 +65,7 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -94,6 +93,7 @@ CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -112,7 +112,6 @@ CONFIG_ARCH_EP93XX=y # # Cirrus EP93xx Implementation Options # -CONFIG_CRUNCH=y # # EP93xx Platforms @@ -232,12 +231,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -346,7 +348,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -371,7 +372,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -412,7 +412,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -576,13 +576,13 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_EP93XX_WATCHDOG=y # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -626,9 +626,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -690,7 +688,16 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # @@ -702,6 +709,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -718,6 +726,7 @@ CONFIG_HWMON=y # CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -776,15 +785,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -813,6 +813,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set @@ -825,6 +826,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set @@ -865,6 +867,32 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +CONFIG_RTC_DRV_M48T86=y +CONFIG_RTC_DRV_EP93XX=y +# CONFIG_RTC_DRV_TEST is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -912,7 +940,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1044,6 +1071,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1053,6 +1081,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index 7b02ca04c3ee..e6f3e4873d6c 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -1,18 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Wed Feb 8 04:49:11 2006 +# Linux kernel version: 2.6.17-rc2 +# Wed Apr 19 21:12:49 2006 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -29,6 +30,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -44,10 +46,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -60,7 +58,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -68,6 +65,7 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -89,11 +87,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set CONFIG_ARCH_IXP2000=y +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -123,6 +123,7 @@ CONFIG_ARCH_IXDP2800=y CONFIG_ARCH_IXDP2X00=y CONFIG_ARCH_IXDP2401=y CONFIG_ARCH_IXDP2801=y +CONFIG_MACH_IXDP28X5=y CONFIG_ARCH_IXDP2X01=y # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set @@ -147,7 +148,6 @@ CONFIG_XSCALE_PMU=y # Bus support # CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -160,6 +160,7 @@ CONFIG_PCI_LEGACY_PROC=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -213,6 +214,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -232,12 +234,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -347,7 +352,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access @@ -366,7 +370,6 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -614,8 +617,9 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -623,6 +627,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -650,7 +655,6 @@ CONFIG_IXP2000_WATCHDOG=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -696,7 +700,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -715,9 +718,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -730,6 +731,11 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SPI_MASTER is not set # +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# # Hardware Monitoring support # CONFIG_HWMON=y @@ -742,6 +748,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -776,7 +783,16 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # @@ -804,6 +820,7 @@ CONFIG_HWMON=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -821,6 +838,12 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -870,7 +893,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -972,6 +994,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 1a2751e9ab05..9ce898a6cf87 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Tue Mar 21 03:27:20 2006 +# Linux kernel version: 2.6.17-rc2 +# Wed Apr 19 21:13:50 2006 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 # # Code maturity level options @@ -28,6 +30,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -43,10 +46,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -59,7 +58,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -67,6 +65,7 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -143,7 +142,6 @@ CONFIG_CPU_BIG_ENDIAN=y # Bus support # CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -230,12 +228,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -365,7 +366,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -527,7 +527,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -735,6 +734,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -776,7 +776,6 @@ CONFIG_WATCHDOG=y # # CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -821,7 +820,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -840,9 +838,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -907,7 +903,16 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # @@ -919,6 +924,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -935,6 +941,7 @@ CONFIG_HWMON=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1000,9 +1007,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1017,15 +1022,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1076,6 +1072,12 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1127,7 +1129,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1268,6 +1269,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 2687a225aa6a..96b7a7762426 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,50 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:20:50 2005 +# Linux kernel version: 2.6.17-rc3 +# Mon May 8 20:15:57 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y +CONFIG_VECTORS_BASE=0xffff0000 # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -52,23 +57,42 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -78,14 +102,17 @@ CONFIG_KMOD=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set CONFIG_ARCH_VERSATILE=y +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set # # Versatile platform type # CONFIG_ARCH_VERSATILE_PB=y -# CONFIG_MACH_VERSATILE_AB is not set +CONFIG_MACH_VERSATILE_AB=y # # Processor Type @@ -106,12 +133,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_VIC=y CONFIG_ICST307=y # # Bus support # CONFIG_ARM_AMBA=y +# CONFIG_PCI is not set # # PCCARD (PCMCIA/CardBus) support @@ -122,6 +151,18 @@ CONFIG_ARM_AMBA=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_LEDS=y CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y @@ -145,7 +186,7 @@ CONFIG_CMDLINE="root=1f03 mem=32M" CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set # CONFIG_FPE_FASTFPE is not set -# CONFIG_VFP is not set +CONFIG_VFP=y # # Userspace binary formats @@ -159,9 +200,92 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set # CONFIG_APM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -174,6 +298,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -192,6 +321,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -214,6 +344,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set @@ -221,7 +352,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -229,7 +360,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_ARM_INTEGRATOR=y -# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -237,7 +368,6 @@ CONFIG_MTD_ARM_INTEGRATOR=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -253,6 +383,11 @@ CONFIG_MTD_ARM_INTEGRATOR=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -264,7 +399,6 @@ CONFIG_MTD_ARM_INTEGRATOR=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -272,21 +406,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -297,6 +423,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -307,71 +434,8 @@ CONFIG_IOSCHED_CFQ=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -379,11 +443,17 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -410,6 +480,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -459,7 +531,6 @@ CONFIG_SERIO_AMBAKMI=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -474,17 +545,16 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_MULTIPORT=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y @@ -503,20 +573,19 @@ CONFIG_LEGACY_PTY_COUNT=16 # # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -534,60 +603,60 @@ CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=m -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -604,27 +673,31 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_FIRMWARE_EDID is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_ARMCLCD=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set CONFIG_FONT_ACORN_8x8=y # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -647,12 +720,18 @@ CONFIG_SND_PCM=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set @@ -661,6 +740,7 @@ CONFIG_SND_PCM_OSS=m # # ALSA ARM devices # +CONFIG_SND_ARMAACI=m # # Open Sound System @@ -672,9 +752,14 @@ CONFIG_SND_PCM_OSS=m # CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -688,25 +773,31 @@ CONFIG_MMC_BLOCK=y CONFIG_MMC_ARMMMCI=m # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y CONFIG_ROMFS_FS=y +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -729,11 +820,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -748,8 +838,8 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -766,16 +856,19 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -784,6 +877,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -803,6 +897,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -858,18 +953,24 @@ CONFIG_NLS_ISO8859_1=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -895,6 +996,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 2ce0e3a27a45..a601b8b55f35 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o endif -head-y := head.o +head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o extra-y := $(head-y) init_task.o vmlinux.lds diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index b324dcac1c56..396efba9bacd 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -95,5 +95,13 @@ int main(void) DEFINE(SYS_ERROR0, 0x9f0000); BLANK(); DEFINE(SIZEOF_MACHINE_DESC, sizeof(struct machine_desc)); + DEFINE(MACHINFO_TYPE, offsetof(struct machine_desc, nr)); + DEFINE(MACHINFO_NAME, offsetof(struct machine_desc, name)); + DEFINE(MACHINFO_PHYSIO, offsetof(struct machine_desc, phys_io)); + DEFINE(MACHINFO_PGOFFIO, offsetof(struct machine_desc, io_pg_offst)); + BLANK(); + DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list)); + DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush)); + DEFINE(PROCINFO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mmu_flags)); return 0; } diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 03532769a97f..0a3e9ad297d8 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -143,12 +143,23 @@ static struct dma_ops isa_dma_ops = { .residue = isa_get_dma_residue, }; -static struct resource dma_resources[] = { - { "dma1", 0x0000, 0x000f }, - { "dma low page", 0x0080, 0x008f }, - { "dma2", 0x00c0, 0x00df }, - { "dma high page", 0x0480, 0x048f } -}; +static struct resource dma_resources[] = { { + .name = "dma1", + .start = 0x0000, + .end = 0x000f +}, { + .name = "dma low page", + .start = 0x0080, + .end = 0x008f +}, { + .name = "dma2", + .start = 0x00c0, + .end = 0x00df +}, { + .name = "dma high page", + .start = 0x0480, + .end = 0x048f +} }; void __init isa_init_dma(dma_t *dma) { diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index b093ab8738b5..adf62e5eaad7 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -20,11 +20,10 @@ #include <asm/mach-types.h> #include <asm/procinfo.h> #include <asm/ptrace.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> #include <asm/system.h> -#define PROCINFO_INITFUNC 12 - /* * Kernel startup entry point. * --------------------------- @@ -79,5 +78,6 @@ __after_proc_init: mov pc, r13 @ clear the BSS and jump @ to start_kernel + .ltorg #include "head-common.S" diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 04b66a9328ef..04f7344e356a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -24,14 +24,6 @@ #include <asm/thread_info.h> #include <asm/system.h> -#define PROCINFO_MMUFLAGS 8 -#define PROCINFO_INITFUNC 12 - -#define MACHINFO_TYPE 0 -#define MACHINFO_PHYSIO 4 -#define MACHINFO_PGOFFIO 8 -#define MACHINFO_NAME 12 - #define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET) /* diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 1ff75cee4b0d..7df6e1aaa323 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -264,8 +264,12 @@ void show_fpregs(struct user_fp *regs) /* * Task structure and kernel stack allocation. */ -static unsigned long *thread_info_head; -static unsigned int nr_thread_info; +struct thread_info_list { + unsigned long *head; + unsigned int nr; +}; + +static DEFINE_PER_CPU(struct thread_info_list, thread_info_list) = { NULL, 0 }; #define EXTRA_TASK_STRUCT 4 @@ -274,12 +278,15 @@ struct thread_info *alloc_thread_info(struct task_struct *task) struct thread_info *thread = NULL; if (EXTRA_TASK_STRUCT) { - unsigned long *p = thread_info_head; + struct thread_info_list *th = &get_cpu_var(thread_info_list); + unsigned long *p = th->head; if (p) { - thread_info_head = (unsigned long *)p[0]; - nr_thread_info -= 1; + th->head = (unsigned long *)p[0]; + th->nr -= 1; } + put_cpu_var(thread_info_list); + thread = (struct thread_info *)p; } @@ -300,13 +307,19 @@ struct thread_info *alloc_thread_info(struct task_struct *task) void free_thread_info(struct thread_info *thread) { - if (EXTRA_TASK_STRUCT && nr_thread_info < EXTRA_TASK_STRUCT) { - unsigned long *p = (unsigned long *)thread; - p[0] = (unsigned long)thread_info_head; - thread_info_head = p; - nr_thread_info += 1; - } else - free_pages((unsigned long)thread, THREAD_SIZE_ORDER); + if (EXTRA_TASK_STRUCT) { + struct thread_info_list *th = &get_cpu_var(thread_info_list); + if (th->nr < EXTRA_TASK_STRUCT) { + unsigned long *p = (unsigned long *)thread; + p[0] = (unsigned long)th->head; + th->head = p; + th->nr += 1; + put_cpu_var(thread_info_list); + return; + } + put_cpu_var(thread_info_list); + } + free_pages((unsigned long)thread, THREAD_SIZE_ORDER); } /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8cff73e668b3..9fc9af88c60c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -407,7 +407,7 @@ static void __init early_initrd(char **p) } __early_param("initrd=", early_initrd); -static void __init add_memory(unsigned long start, unsigned long size) +static void __init arm_add_memory(unsigned long start, unsigned long size) { /* * Ensure that start/size are aligned to a page boundary. @@ -445,7 +445,7 @@ static void __init early_mem(char **p) if (**p == '@') start = memparse(*p + 1, p); - add_memory(start, size); + arm_add_memory(start, size); } __early_param("mem=", early_mem); @@ -587,7 +587,7 @@ static int __init parse_tag_mem32(const struct tag *tag) tag->u.mem.start, tag->u.mem.size / 1024); return -EINVAL; } - add_memory(tag->u.mem.start, tag->u.mem.size); + arm_add_memory(tag->u.mem.start, tag->u.mem.size); return 0; } @@ -807,7 +807,7 @@ static int __init topology_init(void) { int cpu; - for_each_cpu(cpu) + for_each_possible_cpu(cpu) register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu, NULL); return 0; diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 3bdc8c6949c5..16153c86c3f8 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -122,7 +122,7 @@ ENTRY(c_backtrace) #define reg r5 #define stack r6 -.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, lr} +.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, r8, lr} mov stack, r0 mov instr, r1 mov reg, #9 @@ -145,7 +145,7 @@ ENTRY(c_backtrace) adrne r0, .Lcr blne printk mov r0, stack - LOADREGS(fd, sp!, {instr, reg, stack, r7, pc}) + LOADREGS(fd, sp!, {instr, reg, stack, r7, r8, pc}) .Lfp: .asciz " r%d = %08X%c" .Lcr: .asciz "\n" diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index ec9a1cd6176f..58eef6607629 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -189,12 +189,12 @@ ENTRY(__do_div64) moveq pc, lr @ Division by 0: - str lr, [sp, #-4]! + str lr, [sp, #-8]! bl __div0 @ as wrong as it could be... mov yl, #0 mov yh, #0 mov xh, #0 - ldr pc, [sp], #4 + ldr pc, [sp], #8 diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index dc5fa8e5ebef..83f57da3184c 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -79,7 +79,12 @@ static void __init aaed2000_init(void) } static struct map_desc aaed2000_io_desc[] __initdata = { - { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */ + { + .virtual = EXT_GPIO_VBASE, + .pfn = __phys_to_pfn(EXT_GPIO_PBASE), + .length = EXT_GPIO_LENGTH, + .type = MT_DEVICE + }, }; static void __init aaed2000_map_io(void) diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index dce4815cf53c..65be5efd633c 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,7 +20,6 @@ #include <linux/interrupt.h> #include <linux/timex.h> #include <linux/signal.h> -#include <linux/amba/bus.h> #include <asm/hardware.h> #include <asm/irq.h> @@ -50,12 +49,12 @@ static struct map_desc standard_io_desc[] __initdata = { { .virtual = VIO_APB_BASE, - .physical = __phys_to_pfn(PIO_APB_BASE), + .pfn = __phys_to_pfn(PIO_APB_BASE), .length = IO_APB_LENGTH, .type = MT_DEVICE }, { .virtual = VIO_AHB_BASE, - .physical = __phys_to_pfn(PIO_AHB_BASE), + .pfn = __phys_to_pfn(PIO_AHB_BASE), .length = IO_AHB_LENGTH, .type = MT_DEVICE } diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h index b6029a95f19c..59501b573167 100644 --- a/arch/arm/mach-aaec2000/core.h +++ b/arch/arm/mach-aaec2000/core.h @@ -9,6 +9,7 @@ * */ +#include <linux/amba/bus.h> #include <linux/amba/clcd.h> struct sys_timer; diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 1781b8f342c4..bfe47bd6e50c 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -194,13 +194,23 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf_data; +static struct resource at91_cf_resources[] = { + [0] = { + .start = AT91_CF_BASE, + /* ties up CS4, CS5, and CS6 */ + .end = AT91_CF_BASE + (0x30000000 - 1), + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + }, +}; + static struct platform_device at91rm9200_cf_device = { .name = "at91_cf", .id = -1, .dev = { .platform_data = &cf_data, }, - .num_resources = 0, + .resource = at91_cf_resources, + .num_resources = ARRAY_SIZE(at91_cf_resources), }; void __init at91_add_device_cf(struct at91_cf_data *data) diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 9be01b0c3f48..e24566b88a78 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -111,21 +111,21 @@ static void __init ts72xx_map_io(void) } } -static unsigned char ts72xx_rtc_readb(unsigned long addr) +static unsigned char ts72xx_rtc_readbyte(unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE); } -static void ts72xx_rtc_writeb(unsigned char value, unsigned long addr) +static void ts72xx_rtc_writebyte(unsigned char value, unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); __raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE); } static struct m48t86_ops ts72xx_rtc_ops = { - .readb = ts72xx_rtc_readb, - .writeb = ts72xx_rtc_writeb, + .readbyte = ts72xx_rtc_readbyte, + .writebyte = ts72xx_rtc_writebyte, }; static struct platform_device ts72xx_rtc_device = { diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 9d8331be2b58..12ea58a3b84f 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -195,56 +195,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info) } EXPORT_SYMBOL(imx_set_mmc_info); -static struct resource imx_uart1_resources[] = { - [0] = { - .start = 0x00206000, - .end = 0x002060FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART1_MINT_RX), - .end = (UART1_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART1_MINT_TX), - .end = (UART1_MINT_TX), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, -}; - -static struct resource imx_uart2_resources[] = { - [0] = { - .start = 0x00207000, - .end = 0x002070FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART2_MINT_RX), - .end = (UART2_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART2_MINT_TX), - .end = (UART2_MINT_TX), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, -}; - static struct imxfb_mach_info imx_fb_info; void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) @@ -283,8 +233,6 @@ static struct platform_device imxfb_device = { static struct platform_device *devices[] __initdata = { &imx_mmc_device, &imxfb_device, - &imx_uart1_device, - &imx_uart2_device, }; static struct map_desc imx_io_desc[] __initdata = { diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index e34d0df90aed..da893c80d471 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <asm/arch/mmc.h> +#include <asm/arch/imx-uart.h> #include <linux/interrupt.h> #include "generic.h" @@ -48,8 +49,70 @@ static struct platform_device cs89x0_device = { .resource = cs89x0_resources, }; +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct resource imx_uart1_resources[] = { + [0] = { + .start = 0x00206000, + .end = 0x002060FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (UART1_MINT_RX), + .end = (UART1_MINT_RX), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = (UART1_MINT_TX), + .end = (UART1_MINT_TX), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device imx_uart1_device = { + .name = "imx-uart", + .id = 0, + .num_resources = ARRAY_SIZE(imx_uart1_resources), + .resource = imx_uart1_resources, + .dev = { + .platform_data = &uart_pdata, + } +}; + +static struct resource imx_uart2_resources[] = { + [0] = { + .start = 0x00207000, + .end = 0x002070FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (UART2_MINT_RX), + .end = (UART2_MINT_RX), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = (UART2_MINT_TX), + .end = (UART2_MINT_TX), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device imx_uart2_device = { + .name = "imx-uart", + .id = 1, + .num_resources = ARRAY_SIZE(imx_uart2_resources), + .resource = imx_uart2_resources, + .dev = { + .platform_data = &uart_pdata, + } +}; + static struct platform_device *devices[] __initdata = { &cs89x0_device, + &imx_uart1_device, + &imx_uart2_device, }; #ifdef CONFIG_MMC_IMX @@ -75,6 +138,17 @@ mx1ads_init(void) imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); imx_set_mmc_info(&mx1ads_mmc_info); #endif + + imx_gpio_mode(PC9_PF_UART1_CTS); + imx_gpio_mode(PC10_PF_UART1_RTS); + imx_gpio_mode(PC11_PF_UART1_TXD); + imx_gpio_mode(PC12_PF_UART1_RXD); + + imx_gpio_mode(PB28_PF_UART2_CTS); + imx_gpio_mode(PB29_PF_UART2_RTS); + imx_gpio_mode(PB30_PF_UART2_TXD); + imx_gpio_mode(PB31_PF_UART2_RXD); + platform_add_devices(devices, ARRAY_SIZE(devices)); } @@ -87,7 +161,7 @@ mx1ads_map_io(void) MACHINE_START(MX1ADS, "Motorola MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ .phys_io = 0x00200000, - .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, .boot_params = 0x08000100, .map_io = mx1ads_map_io, .init_irq = imx_init_irq, diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 092ee12ced42..affd1d5d7440 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -178,8 +178,12 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) static void ixp23xx_irq_mask(unsigned int irq) { - volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + volatile unsigned long *intr_reg; + if (irq >= 56) + irq += 8; + + intr_reg = IXP23XX_INTR_EN1 + (irq / 32); *intr_reg &= ~(1 << (irq % 32)); } @@ -199,17 +203,25 @@ static void ixp23xx_irq_ack(unsigned int irq) */ static void ixp23xx_irq_level_unmask(unsigned int irq) { - volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + volatile unsigned long *intr_reg; ixp23xx_irq_ack(irq); + if (irq >= 56) + irq += 8; + + intr_reg = IXP23XX_INTR_EN1 + (irq / 32); *intr_reg |= (1 << (irq % 32)); } static void ixp23xx_irq_edge_unmask(unsigned int irq) { - volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + volatile unsigned long *intr_reg; + + if (irq >= 56) + irq += 8; + intr_reg = IXP23XX_INTR_EN1 + (irq / 32); *intr_reg |= (1 << (irq % 32)); } diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 5bf50a2a737d..3b23f43cb160 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -11,6 +11,7 @@ comment "IXP4xx Platforms" config MACH_NSLU2 bool prompt "Linksys NSLU2" + select PCI help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, @@ -18,6 +19,7 @@ config MACH_NSLU2 config ARCH_AVILA bool "Avila" + select PCI help Say 'Y' here if you want your kernel to support the Gateworks Avila Network Platform. For more information on this platform, @@ -25,6 +27,7 @@ config ARCH_AVILA config ARCH_ADI_COYOTE bool "Coyote" + select PCI help Say 'Y' here if you want your kernel to support the ADI Engineering Coyote Gateway Reference Platform. For more @@ -32,6 +35,7 @@ config ARCH_ADI_COYOTE config ARCH_IXDP425 bool "IXDP425" + select PCI help Say 'Y' here if you want your kernel to support Intel's IXDP425 Development Platform (Also known as Richfield). @@ -39,6 +43,7 @@ config ARCH_IXDP425 config MACH_IXDPG425 bool "IXDPG425" + select PCI help Say 'Y' here if you want your kernel to support Intel's IXDPG425 Development Platform (Also known as Montajade). @@ -46,6 +51,7 @@ config MACH_IXDPG425 config MACH_IXDP465 bool "IXDP465" + select PCI help Say 'Y' here if you want your kernel to support Intel's IXDP465 Development Platform (Also known as BMP). @@ -72,6 +78,7 @@ config ARCH_PRPMC1100 config MACH_NAS100D bool prompt "NAS100D" + select PCI help Say 'Y' here if you want your kernel to support Iomega's NAS 100d device. For more information on this platform, @@ -96,6 +103,7 @@ config CPU_IXP46X config MACH_GTWX5715 bool "Gemtek WX5715 (Linksys WRV54G)" depends on ARCH_IXP4XX + select PCI help This board is currently inside the Linksys WRV54G Gateways. @@ -110,11 +118,16 @@ config MACH_GTWX5715 "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 - comment "IXP4xx Options" +config DMABOUNCE + bool + default y + depends on PCI + config IXP4XX_INDIRECT_PCI bool "Use indirect PCI memory access" + depends on PCI help IXP4xx provides two methods of accessing PCI memory space: @@ -128,7 +141,7 @@ config IXP4XX_INDIRECT_PCI 2) If > 64MB of memory space is required, the IXP4xx can be configured to use indirect registers to access PCI This allows for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. - The disadvantadge of this is that every PCI access requires + The disadvantage of this is that every PCI access requires three local register accesses plus a spinlock, but in some cases the performance hit is acceptable. In addition, you cannot mmap() PCI devices in this case due to the indirect nature diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 0471044fa179..5a4aaa0e0a09 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -2,8 +2,9 @@ # Makefile for the linux kernel. # -obj-y += common.o common-pci.o +obj-y += common.o +obj-$(CONFIG_PCI) += common-pci.o obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index a0888e160e3b..00b761ff0f9c 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); /* * IRQ -> GPIO mapping table */ -static char irq2gpio[32] = { +static signed char irq2gpio[32] = { -1, -1, -1, -1, -1, -1, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 2, 3, 4, 5, 6, diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index b371d723635f..8a25a1c8019f 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -196,12 +196,9 @@ static int __init corgi_ssp_probe(struct platform_device *dev) int ret; /* Chip Select - Disable All */ - GPDR(ssp_machinfo->cs_lcdcon) |= GPIO_bit(ssp_machinfo->cs_lcdcon); /* output */ - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - GPDR(ssp_machinfo->cs_max1111) |= GPIO_bit(ssp_machinfo->cs_max1111); /* output */ - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ + pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); + pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); + pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c index 458112b21e25..7d8c85486c66 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/mach-pxa/dma.c @@ -45,23 +45,16 @@ int pxa_request_dma (char *name, pxa_dma_prio prio, local_irq_save(flags); - /* try grabbing a DMA channel with the requested priority */ - for (i = prio; i < prio + PXA_DMA_NBCH(prio); i++) { - if (!dma_channels[i].name) { - found = 1; - break; - } - } - - if (!found) { - /* requested prio group is full, try hier priorities */ - for (i = prio-1; i >= 0; i--) { + do { + /* try grabbing a DMA channel with the requested priority */ + pxa_for_each_dma_prio (i, prio) { if (!dma_channels[i].name) { found = 1; break; } } - } + /* if requested prio group is full, try a hier priority */ + } while (!found && prio--); if (found) { DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 98356f810007..b307f11951df 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -95,7 +95,10 @@ static void __init mainstone_init_irq(void) for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { set_irq_chip(irq, &mainstone_irq_chip); set_irq_handler(irq, do_level_IRQ); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14)) + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); + else + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } set_irq_flags(MAINSTONE_IRQ(8), 0); set_irq_flags(MAINSTONE_IRQ(12), 0); @@ -490,6 +493,7 @@ static void __init mainstone_map_io(void) MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ .phys_io = 0x40000000, + .boot_params = 0xa0000100, /* BLOB boot parameter setting */ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = mainstone_map_io, .init_irq = mainstone_init_irq, diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index d4a586e38d5b..693fb1e396e0 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -137,8 +137,11 @@ static struct amba_device *amba_devs[] __initdata = { static void __init gic_init_irq(void) { #ifdef CONFIG_REALVIEW_MPCORE + unsigned int pldctrl; writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); - writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8); + pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + 0xd8); + pldctrl |= 0x00800000; /* New irq mode */ + writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8); writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); #endif gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index ce7d81000695..970f98dadffc 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG depends on ARCH_S3C2410 && PM help Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt` + Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> for more information. config S3C2410_PM_CHECK diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/mach-s3c2410/common-smdk.c index f372fbda124e..c940890f621f 100644 --- a/arch/arm/mach-s3c2410/common-smdk.c +++ b/arch/arm/mach-s3c2410/common-smdk.c @@ -50,7 +50,7 @@ static struct mtd_partition smdk_default_nand_part[] = { .offset = 0, }, [1] = { - .name = "S3C2410 flash parition 1", + .name = "S3C2410 flash partition 1", .offset = 0, .size = SZ_2M, }, diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index 57a15974d4b5..d7a30ed6c327 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -139,7 +139,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev) clkdivn = __raw_readl(S3C2410_CLKDIVN); clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(camdivn, S3C2410_CLKDIVN); + __raw_writel(clkdivn, S3C2410_CLKDIVN); mutex_unlock(&clocks_mutex); } diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 832fb86a03b4..73de2eaca22a 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend) mrc p15, 0, r5, c13, c0, 0 @ PID mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ translation table base address - mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register - mrc p15, 0, r9, c1, c0, 0 @ control register + mrc p15, 0, r8, c1, c0, 0 @ control register stmia r0, { r4 - r13 } @@ -165,7 +164,6 @@ ENTRY(s3c2410_cpu_resume) mcr p15, 0, r5, c13, c0, 0 @ PID mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ translation table base - mcr p15, 0, r8, c1, c1, 0 @ auxilliary control #ifdef CONFIG_DEBUG_RESUME mov r3, #'R' @@ -173,7 +171,7 @@ ENTRY(s3c2410_cpu_resume) #endif ldr r2, =resume_with_mmu - mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc + mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc nop @ second-to-last before mmu mov pc, r2 @ go back to virtual address diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index c131a5201b5b..b3a56024182e 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -199,10 +199,26 @@ static void sa1100_unmask_irq(unsigned int irq) ICMR |= (1 << irq); } +/* + * Apart form GPIOs, only the RTC alarm can be a wakeup event. + */ +static int sa1100_set_wake(unsigned int irq, unsigned int on) +{ + if (irq == IRQ_RTCAlrm) { + if (on) + PWER |= PWER_RTC; + else + PWER &= ~PWER_RTC; + return 0; + } + return -EINVAL; +} + static struct irqchip sa1100_normal_chip = { .ack = sa1100_mask_irq, .mask = sa1100_mask_irq, .unmask = sa1100_unmask_irq, + .set_wake = sa1100_set_wake, }; static struct resource irq_resource = { diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 25e0ca3e598c..c1f7180c7bed 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -141,7 +141,7 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, return NULL; addr = (unsigned long)area->addr; if (remap_area_pages(addr, pfn, size, flags)) { - vfree((void *)addr); + vunmap((void *)addr); return NULL; } return (void __iomem *) (offset + (char *)addr); @@ -173,7 +173,7 @@ EXPORT_SYMBOL(__ioremap); void __iounmap(void __iomem *addr) { - vfree((void *) (PAGE_MASK & (unsigned long) addr)); + vunmap((void *)(PAGE_MASK & (unsigned long)addr)); } EXPORT_SYMBOL(__iounmap); diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index f14b2d0f3690..95273de4f772 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -376,7 +376,7 @@ void __init build_mem_type_table(void) ecc_mask = 0; } - if (cpu_arch <= CPU_ARCH_ARMv5TEJ) { + if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { if (mem_types[i].prot_l1) mem_types[i].prot_l1 |= PMD_BIT4; @@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode) pgd = init_mm.pgd; base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; - if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ) + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) base_pmdval |= PMD_BIT4; for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 80873b36c3f7..8d32e21fe151 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -427,12 +427,13 @@ __xsc3_setup: #endif mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg mrc p15, 0, r0, c1, c0, 0 @ get control register - bic r0, r0, #0x0200 @ .... ..R. .... .... bic r0, r0, #0x0002 @ .... .... .... ..A. orr r0, r0, #0x0005 @ .... .... .... .C.M #if BTB_ENABLE + bic r0, r0, #0x0200 @ .... ..R. .... .... orr r0, r0, #0x3900 @ ..VI Z..S .... .... #else + bic r0, r0, #0x0a00 @ .... Z.R. .... .... orr r0, r0, #0x3100 @ ..VI ...S .... .... #endif #if L2_CACHE_ENABLE diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 8ab5300dcb94..6d7de9c0412f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Feb 20 10:18:02 2006 +# Last update: Mon May 8 20:11:05 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -566,8 +566,8 @@ switchgrass MACH_SWITCHGRASS SWITCHGRASS 549 ens_cmu MACH_ENS_CMU ENS_CMU 550 mm6_sdb MACH_MM6_SDB MM6_SDB 551 saturn MACH_SATURN SATURN 552 -argonplusevb MACH_ARGONPLUSEVB ARGONPLUSEVB 553 -scma11evb MACH_SCMA11EVB SCMA11EVB 554 +i30030evb MACH_ARGONPLUSEVB ARGONPLUSEVB 553 +mxc27530evb MACH_SCMA11EVB SCMA11EVB 554 smdk2800 MACH_SMDK2800 SMDK2800 555 mtwilson MACH_MTWILSON MTWILSON 556 ziti MACH_ZITI ZITI 557 @@ -647,7 +647,7 @@ sendt MACH_SENDT SENDT 630 mx2jazz MACH_MX2JAZZ MX2JAZZ 631 multiio MACH_MULTIIO MULTIIO 632 hrdisplay MACH_HRDISPLAY HRDISPLAY 633 -scma11bb MACH_SCMA11BB SCMA11BB 634 +mxc27530ads MACH_SCMA11BB SCMA11BB 634 trizeps3 MACH_TRIZEPS3 TRIZEPS3 635 zefeerdza MACH_ZEFEERDZA ZEFEERDZA 636 zefeerdzb MACH_ZEFEERDZB ZEFEERDZB 637 @@ -721,7 +721,7 @@ gp32 MACH_GP32 GP32 706 gem MACH_GEM GEM 707 i858 MACH_I858 I858 708 hx2750 MACH_HX2750 HX2750 709 -zeusevb MACH_ZEUSEVB ZEUSEVB 710 +mxc91131evb MACH_ZEUSEVB ZEUSEVB 710 p700 MACH_P700 P700 711 cpe MACH_CPE CPE 712 spitz MACH_SPITZ SPITZ 713 @@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787 rea9200 MACH_REA9200 REA9200 788 acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 ixp425 MACH_IXP425 IXP425 790 -argonplusodyssey MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791 +i30030ads MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791 perch MACH_PERCH PERCH 792 eis05r1 MACH_EIS05R1 EIS05R1 793 pepperpad MACH_PEPPERPAD PEPPERPAD 794 @@ -827,7 +827,7 @@ micro9l MACH_MICRO9L MICRO9L 812 uc5471dsp MACH_UC5471DSP UC5471DSP 813 sj5471eng MACH_SJ5471ENG SJ5471ENG 814 none MACH_CMPXA26X CMPXA26X 815 -nc MACH_NC NC 816 +nc1 MACH_NC NC 816 omap_palmte MACH_OMAP_PALMTE OMAP_PALMTE 817 ajax52x MACH_AJAX52X AJAX52X 818 siriustar MACH_SIRIUSTAR SIRIUSTAR 819 @@ -930,7 +930,7 @@ netclient MACH_NETCLIENT NETCLIENT 916 xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917 xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 -argonlvevb MACH_ARGONLVEVB ARGONLVEVB 920 +mxc30030evb MACH_ARGONLVEVB ARGONLVEVB 920 rea_2d MACH_REA_2D REA_2D 921 eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 @@ -965,7 +965,78 @@ sisteron MACH_SISTERON SISTERON 951 rx1950 MACH_RX1950 RX1950 952 tsc_venus MACH_TSC_VENUS TSC_VENUS 953 ds101j MACH_DS101J DS101J 954 -mxc300_30ads MACH_MXC30030ADS MXC30030ADS 955 +mxc30030ads MACH_MXC30030ADS MXC30030ADS 955 fujitsu_wimaxsoc MACH_FUJITSU_WIMAXSOC FUJITSU_WIMAXSOC 956 dualpcmodem MACH_DUALPCMODEM DUALPCMODEM 957 gesbc9312 MACH_GESBC9312 GESBC9312 958 +htcapache MACH_HTCAPACHE HTCAPACHE 959 +ixdp435 MACH_IXDP435 IXDP435 960 +catprovt100 MACH_CATPROVT100 CATPROVT100 961 +picotux1xx MACH_PICOTUX1XX PICOTUX1XX 962 +picotux2xx MACH_PICOTUX2XX PICOTUX2XX 963 +dsmg600 MACH_DSMG600 DSMG600 964 +empc2 MACH_EMPC2 EMPC2 965 +ventura MACH_VENTURA VENTURA 966 +phidget_sbc MACH_PHIDGET_SBC PHIDGET_SBC 967 +ij3k MACH_IJ3K IJ3K 968 +pisgah MACH_PISGAH PISGAH 969 +omap_fsample MACH_OMAP_FSAMPLE OMAP_FSAMPLE 970 +sg720 MACH_SG720 SG720 971 +redfox MACH_REDFOX REDFOX 972 +mysh_ep9315_1 MACH_MYSH_EP9315_1 MYSH_EP9315_1 973 +tpf106 MACH_TPF106 TPF106 974 +at91rm9200kg MACH_AT91RM9200KG AT91RM9200KG 975 +racemt2 MACH_SLEDB SLEDB 976 +ontrack MACH_ONTRACK ONTRACK 977 +pm1200 MACH_PM1200 PM1200 978 +ess24562 MACH_ESS24XXX ESS24XXX 979 +coremp7 MACH_COREMP7 COREMP7 980 +nexcoder_6446 MACH_NEXCODER_6446 NEXCODER_6446 981 +stvc8380 MACH_STVC8380 STVC8380 982 +teklynx MACH_TEKLYNX TEKLYNX 983 +carbonado MACH_CARBONADO CARBONADO 984 +sysmos_mp730 MACH_SYSMOS_MP730 SYSMOS_MP730 985 +snapper_cl15 MACH_SNAPPER_CL15 SNAPPER_CL15 986 +pgigim MACH_PGIGIM PGIGIM 987 +ptx9160p2 MACH_PTX9160P2 PTX9160P2 988 +dcore1 MACH_DCORE1 DCORE1 989 +victorpxa MACH_VICTORPXA VICTORPXA 990 +mx2dtb MACH_MX2DTB MX2DTB 991 +pxa_irex_er0100 MACH_PXA_IREX_ER0100 PXA_IREX_ER0100 992 +omap_palmz71 MACH_OMAP_PALMZ71 OMAP_PALMZ71 993 +bartec_deg MACH_BARTEC_DEG BARTEC_DEG 994 +hw50251 MACH_HW50251 HW50251 995 +ibox MACH_IBOX IBOX 996 +atlaslh7a404 MACH_ATLASLH7A404 ATLASLH7A404 997 +pt2026 MACH_PT2026 PT2026 998 +htcalpine MACH_HTCALPINE HTCALPINE 999 +bartec_vtu MACH_BARTEC_VTU BARTEC_VTU 1000 +vcoreii MACH_VCOREII VCOREII 1001 +pdnb3 MACH_PDNB3 PDNB3 1002 +htcbeetles MACH_HTCBEETLES HTCBEETLES 1003 +s3c6400 MACH_S3C6400 S3C6400 1004 +s3c2443 MACH_S3C2443 S3C2443 1005 +omap_ldk MACH_OMAP_LDK OMAP_LDK 1006 +smdk2460 MACH_SMDK2460 SMDK2460 1007 +smdk2440 MACH_SMDK2440 SMDK2440 1008 +smdk2412 MACH_SMDK2412 SMDK2412 1009 +webbox MACH_WEBBOX WEBBOX 1010 +cwwndp MACH_CWWNDP CWWNDP 1011 +dragon MACH_DRAGON DRAGON 1012 +opendo_cpu_board MACH_OPENDO_CPU_BOARD OPENDO_CPU_BOARD 1013 +ccm2200 MACH_CCM2200 CCM2200 1014 +etwarm MACH_ETWARM ETWARM 1015 +m93030 MACH_M93030 M93030 1016 +cc7u MACH_CC7U CC7U 1017 +mtt_ranger MACH_MTT_RANGER MTT_RANGER 1018 +nexus MACH_NEXUS NEXUS 1019 +desman MACH_DESMAN DESMAN 1020 +bkde303 MACH_BKDE303 BKDE303 1021 +smdk2413 MACH_SMDK2413 SMDK2413 1022 +aml_m7200 MACH_AML_M7200 AML_M7200 1023 +aml_m5900 MACH_AML_M5900 AML_M5900 1024 +sg640 MACH_SG640 SG640 1025 +edg79524 MACH_EDG79524 EDG79524 1026 +ai2410 MACH_AI2410 AI2410 1027 +ixp465 MACH_IXP465 IXP465 1028 +balloon3 MACH_BALLOON3 BALLOON3 1029 diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index febd115dba28..009038c8113e 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -197,7 +197,7 @@ u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exce dd, d, exceptions); vfp_put_double(dd, d); } - return exceptions & ~VFP_NAN_FLAG; + return exceptions; } /* diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 22f3da4e0829..03486be04193 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -180,7 +180,7 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) * emulate it. */ } - return exceptions; + return exceptions & ~VFP_NAN_FLAG; } /* @@ -245,7 +245,7 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) */ barrier(); trigger = fmrx(FPINST2); - fpscr = fmrx(FPSCR); + orig_fpscr = fpscr = fmrx(FPSCR); emulate: exceptions = vfp_emulate_instruction(trigger, fpscr, regs); diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 4ac27f193934..dae2c2f46052 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -203,7 +203,7 @@ u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exce vfp_put_float(sd, d); } - return exceptions & ~VFP_NAN_FLAG; + return exceptions; } /* diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 18ec9fe6deb6..8dfa3054f10f 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -467,7 +467,7 @@ endchoice choice depends on EXPERIMENTAL && !X86_PAE - prompt "Memory split" + prompt "Memory split" if EMBEDDED default VMSPLIT_3G help Select the desired split between kernel and user memory. @@ -756,12 +756,12 @@ config PHYSICAL_START config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC + depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER ---help--- - Say Y here to experiment with turning CPUs off and on. CPUs - can be controlled through /sys/devices/system/cpu. + Say Y here to experiment with turning CPUs off and on, and to + enable suspend on SMP systems. CPUs can be controlled through + /sys/devices/system/cpu. - Say N. endmenu diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 6e97df6979e8..c92191b1fb67 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -81,4 +81,13 @@ config X86_MPPARSE depends on X86_LOCAL_APIC && !X86_VISWS default y +config DOUBLEFAULT + default y + bool "Enable doublefault exception handler" if EMBEDDED + help + This option allows trapping of rare doublefault exceptions that + would otherwise cause a system to silently reboot. Disabling this + option saves about 4k and might cause you much additional grey + hair. + endmenu diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 5b9ed21216cf..96fb8a020af2 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -6,7 +6,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ - pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ + pci-dma.o i386_ksyms.o i387.o bootflag.o \ quirks.o i8237.o topology.o alternative.o obj-y += cpu/ diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 030a0007a4e0..40e5aba3ad3d 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -168,7 +168,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) unsigned long i; int config_size; - if (!phys_addr || !size || !cpu_has_apic) + if (!phys_addr || !size) return -EINVAL; mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size); @@ -215,7 +215,7 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { struct acpi_table_madt *madt = NULL; - if (!phys_addr || !size || !cpu_has_apic) + if (!phys_addr || !size) return -EINVAL; madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 2e3b643a4dc4..1649a175a206 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -5,17 +5,34 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/acpi.h> + #include <asm/pci-direct.h> #include <asm/acpi.h> #include <asm/apic.h> +#ifdef CONFIG_ACPI + +static int nvidia_hpet_detected __initdata; + +static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) +{ + nvidia_hpet_detected = 1; + return 0; +} +#endif + static int __init check_bridge(int vendor, int device) { #ifdef CONFIG_ACPI - /* According to Nvidia all timer overrides are bogus. Just ignore - them all. */ + /* According to Nvidia all timer overrides are bogus unless HPET + is enabled. */ if (vendor == PCI_VENDOR_ID_NVIDIA) { - acpi_skip_timer_override = 1; + nvidia_hpet_detected = 0; + acpi_table_parse(ACPI_HPET, nvidia_hpet_check); + if (nvidia_hpet_detected == 0) { + acpi_skip_timer_override = 1; + } } #endif if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) { diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 254cee9f0b7b..3d4b2f3d116a 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -757,10 +757,6 @@ static int __init apic_set_verbosity(char *str) apic_verbosity = APIC_DEBUG; else if (strcmp("verbose", str) == 0) apic_verbosity = APIC_VERBOSE; - else - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return 1; } @@ -1345,6 +1341,14 @@ int __init APIC_init_uniprocessor (void) connect_bsp_APIC(); + /* + * Hack: In case of kdump, after a crash, kernel might be booting + * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid + * might be zero if read from MP tables. Get it from LAPIC. + */ +#ifdef CONFIG_CRASH_DUMP + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); +#endif phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); setup_local_APIC(); diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index da30a374dd4e..df0e1745f189 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -1079,7 +1079,7 @@ static int apm_console_blank(int blank) break; } - if (error == APM_NOT_ENGAGED && state != APM_STATE_READY) { + if (error == APM_NOT_ENGAGED) { static int tried; int eng_error; if (tried++ == 0) { diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index ff2b2154ac1b..786d1a57048b 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -207,6 +207,8 @@ static void __init init_amd(struct cpuinfo_x86 *c) set_bit(X86_FEATURE_K7, c->x86_capability); break; } + if (c->x86 >= 6) + set_bit(X86_FEATURE_FXSAVE_LEAK, c->x86_capability); display_cacheinfo(c); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 7c0e160a2145..71fffa174425 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -905,14 +905,17 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi { cpumask_t oldmask = CPU_MASK_ALL; struct powernow_k8_data *data = powernow_data[pol->cpu]; - u32 checkfid = data->currfid; - u32 checkvid = data->currvid; + u32 checkfid; + u32 checkvid; unsigned int newstate; int ret = -EIO; if (!data) return -EINVAL; + checkfid = data->currfid; + checkvid = data->currvid; + /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); @@ -1109,9 +1112,6 @@ static unsigned int powernowk8_get (unsigned int cpu) if (!data) return -EINVAL; - if (!data) - return -EINVAL; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); if (smp_processor_id() != cpu) { printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu); diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 9df87b03612c..c8547a6fa7e6 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -642,7 +642,7 @@ static void __cpuexit cache_remove_dev(struct sys_device * sys_dev) return; } -static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb, +static int cacheinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 006141d1c12a..1d9a4abcdfc7 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -168,7 +168,7 @@ static int cpuid_class_device_create(int i) return err; } -static int __devinit cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) +static int cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c deleted file mode 100644 index 5efceebc48dc..000000000000 --- a/arch/i386/kernel/dmi_scan.c +++ /dev/null @@ -1,358 +0,0 @@ -#include <linux/types.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/dmi.h> -#include <linux/efi.h> -#include <linux/bootmem.h> -#include <linux/slab.h> -#include <asm/dmi.h> - -static char * __init dmi_string(struct dmi_header *dm, u8 s) -{ - u8 *bp = ((u8 *) dm) + dm->length; - char *str = ""; - - if (s) { - s--; - while (s > 0 && *bp) { - bp += strlen(bp) + 1; - s--; - } - - if (*bp != 0) { - str = dmi_alloc(strlen(bp) + 1); - if (str != NULL) - strcpy(str, bp); - else - printk(KERN_ERR "dmi_string: out of memory.\n"); - } - } - - return str; -} - -/* - * We have to be cautious here. We have seen BIOSes with DMI pointers - * pointing to completely the wrong place for example - */ -static int __init dmi_table(u32 base, int len, int num, - void (*decode)(struct dmi_header *)) -{ - u8 *buf, *data; - int i = 0; - - buf = dmi_ioremap(base, len); - if (buf == NULL) - return -1; - - data = buf; - - /* - * Stop when we see all the items the table claimed to have - * OR we run off the end of the table (also happens) - */ - while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) { - struct dmi_header *dm = (struct dmi_header *)data; - /* - * We want to know the total length (formated area and strings) - * before decoding to make sure we won't run off the table in - * dmi_decode or dmi_string - */ - data += dm->length; - while ((data - buf < len - 1) && (data[0] || data[1])) - data++; - if (data - buf < len - 1) - decode(dm); - data += 2; - i++; - } - dmi_iounmap(buf, len); - return 0; -} - -static int __init dmi_checksum(u8 *buf) -{ - u8 sum = 0; - int a; - - for (a = 0; a < 15; a++) - sum += buf[a]; - - return sum == 0; -} - -static char *dmi_ident[DMI_STRING_MAX]; -static LIST_HEAD(dmi_devices); - -/* - * Save a DMI string - */ -static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) -{ - char *p, *d = (char*) dm; - - if (dmi_ident[slot]) - return; - - p = dmi_string(dm, d[string]); - if (p == NULL) - return; - - dmi_ident[slot] = p; -} - -static void __init dmi_save_devices(struct dmi_header *dm) -{ - int i, count = (dm->length - sizeof(struct dmi_header)) / 2; - struct dmi_device *dev; - - for (i = 0; i < count; i++) { - char *d = (char *)(dm + 1) + (i * 2); - - /* Skip disabled device */ - if ((*d & 0x80) == 0) - continue; - - dev = dmi_alloc(sizeof(*dev)); - if (!dev) { - printk(KERN_ERR "dmi_save_devices: out of memory.\n"); - break; - } - - dev->type = *d++ & 0x7f; - dev->name = dmi_string(dm, *d); - dev->device_data = NULL; - - list_add(&dev->list, &dmi_devices); - } -} - -static void __init dmi_save_ipmi_device(struct dmi_header *dm) -{ - struct dmi_device *dev; - void * data; - - data = dmi_alloc(dm->length); - if (data == NULL) { - printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); - return; - } - - memcpy(data, dm, dm->length); - - dev = dmi_alloc(sizeof(*dev)); - if (!dev) { - printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); - return; - } - - dev->type = DMI_DEV_TYPE_IPMI; - dev->name = "IPMI controller"; - dev->device_data = data; - - list_add(&dev->list, &dmi_devices); -} - -/* - * Process a DMI table entry. Right now all we care about are the BIOS - * and machine entries. For 2.5 we should pull the smbus controller info - * out of here. - */ -static void __init dmi_decode(struct dmi_header *dm) -{ - switch(dm->type) { - case 0: /* BIOS Information */ - dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); - dmi_save_ident(dm, DMI_BIOS_VERSION, 5); - dmi_save_ident(dm, DMI_BIOS_DATE, 8); - break; - case 1: /* System Information */ - dmi_save_ident(dm, DMI_SYS_VENDOR, 4); - dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); - dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); - dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); - break; - case 2: /* Base Board Information */ - dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); - dmi_save_ident(dm, DMI_BOARD_NAME, 5); - dmi_save_ident(dm, DMI_BOARD_VERSION, 6); - break; - case 10: /* Onboard Devices Information */ - dmi_save_devices(dm); - break; - case 38: /* IPMI Device Information */ - dmi_save_ipmi_device(dm); - } -} - -static int __init dmi_present(char __iomem *p) -{ - u8 buf[15]; - memcpy_fromio(buf, p, 15); - if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { - u16 num = (buf[13] << 8) | buf[12]; - u16 len = (buf[7] << 8) | buf[6]; - u32 base = (buf[11] << 24) | (buf[10] << 16) | - (buf[9] << 8) | buf[8]; - - /* - * DMI version 0.0 means that the real version is taken from - * the SMBIOS version, which we don't know at this point. - */ - if (buf[14] != 0) - printk(KERN_INFO "DMI %d.%d present.\n", - buf[14] >> 4, buf[14] & 0xF); - else - printk(KERN_INFO "DMI present.\n"); - if (dmi_table(base,len, num, dmi_decode) == 0) - return 0; - } - return 1; -} - -void __init dmi_scan_machine(void) -{ - char __iomem *p, *q; - int rc; - - if (efi_enabled) { - if (efi.smbios == EFI_INVALID_TABLE_ADDR) - goto out; - - /* This is called as a core_initcall() because it isn't - * needed during early boot. This also means we can - * iounmap the space when we're done with it. - */ - p = dmi_ioremap(efi.smbios, 32); - if (p == NULL) - goto out; - - rc = dmi_present(p + 0x10); /* offset of _DMI_ string */ - dmi_iounmap(p, 32); - if (!rc) - return; - } - else { - /* - * no iounmap() for that ioremap(); it would be a no-op, but - * it's so early in setup that sucker gets confused into doing - * what it shouldn't if we actually call it. - */ - p = dmi_ioremap(0xF0000, 0x10000); - if (p == NULL) - goto out; - - for (q = p; q < p + 0x10000; q += 16) { - rc = dmi_present(q); - if (!rc) - return; - } - } - out: printk(KERN_INFO "DMI not present or invalid.\n"); -} - -/** - * dmi_check_system - check system DMI data - * @list: array of dmi_system_id structures to match against - * - * Walk the blacklist table running matching functions until someone - * returns non zero or we hit the end. Callback function is called for - * each successfull match. Returns the number of matches. - */ -int dmi_check_system(struct dmi_system_id *list) -{ - int i, count = 0; - struct dmi_system_id *d = list; - - while (d->ident) { - for (i = 0; i < ARRAY_SIZE(d->matches); i++) { - int s = d->matches[i].slot; - if (s == DMI_NONE) - continue; - if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr)) - continue; - /* No match */ - goto fail; - } - count++; - if (d->callback && d->callback(d)) - break; -fail: d++; - } - - return count; -} -EXPORT_SYMBOL(dmi_check_system); - -/** - * dmi_get_system_info - return DMI data value - * @field: data index (see enum dmi_filed) - * - * Returns one DMI data value, can be used to perform - * complex DMI data checks. - */ -char *dmi_get_system_info(int field) -{ - return dmi_ident[field]; -} -EXPORT_SYMBOL(dmi_get_system_info); - -/** - * dmi_find_device - find onboard device by type/name - * @type: device type or %DMI_DEV_TYPE_ANY to match all device types - * @desc: device name string or %NULL to match all - * @from: previous device found in search, or %NULL for new search. - * - * Iterates through the list of known onboard devices. If a device is - * found with a matching @vendor and @device, a pointer to its device - * structure is returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL to the @from argument. - * If @from is not %NULL, searches continue from next device. - */ -struct dmi_device * dmi_find_device(int type, const char *name, - struct dmi_device *from) -{ - struct list_head *d, *head = from ? &from->list : &dmi_devices; - - for(d = head->next; d != &dmi_devices; d = d->next) { - struct dmi_device *dev = list_entry(d, struct dmi_device, list); - - if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) && - ((name == NULL) || (strcmp(dev->name, name) == 0))) - return dev; - } - - return NULL; -} -EXPORT_SYMBOL(dmi_find_device); - -/** - * dmi_get_year - Return year of a DMI date - * @field: data index (like dmi_get_system_info) - * - * Returns -1 when the field doesn't exist. 0 when it is broken. - */ -int dmi_get_year(int field) -{ - int year; - char *s = dmi_get_system_info(field); - - if (!s) - return -1; - if (*s == '\0') - return 0; - s = strrchr(s, '/'); - if (!s) - return 0; - - s += 1; - year = simple_strtoul(s, NULL, 0); - if (year && year < 100) { /* 2-digit year */ - year += 1900; - if (year < 1996) /* no dates < spec 1.0 */ - year += 100; - } - - return year; -} diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index f8f132aa5472..d70f2ade5cde 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2238,6 +2238,8 @@ static inline void unlock_ExtINT_logic(void) spin_unlock_irqrestore(&ioapic_lock, flags); } +int timer_uses_ioapic_pin_0; + /* * This code may look a bit paranoid, but it's supposed to cooperate with * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ @@ -2274,6 +2276,9 @@ static inline void check_timer(void) pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; + if (pin1 == 0) + timer_uses_ioapic_pin_0 = 1; + printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index f19768789e8a..38806f427849 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -43,7 +43,7 @@ DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* insert a jmp code */ -static inline void set_jmp_op(void *from, void *to) +static __always_inline void set_jmp_op(void *from, void *to) { struct __arch_jmp_op { char op; @@ -57,7 +57,7 @@ static inline void set_jmp_op(void *from, void *to) /* * returns non-zero if opcodes can be boosted. */ -static inline int can_boost(kprobe_opcode_t opcode) +static __always_inline int can_boost(kprobe_opcode_t opcode) { switch (opcode & 0xf0 ) { case 0x70: @@ -88,7 +88,7 @@ static inline int can_boost(kprobe_opcode_t opcode) /* * returns non-zero if opcode modifies the interrupt flag. */ -static inline int is_IF_modifier(kprobe_opcode_t opcode) +static int __kprobes is_IF_modifier(kprobe_opcode_t opcode) { switch (opcode) { case 0xfa: /* cli */ @@ -138,7 +138,7 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) mutex_unlock(&kprobe_mutex); } -static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); kcb->prev_kprobe.status = kcb->kprobe_status; @@ -146,7 +146,7 @@ static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; } -static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; kcb->kprobe_status = kcb->prev_kprobe.status; @@ -154,7 +154,7 @@ static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, +static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = p; @@ -164,7 +164,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, kcb->kprobe_saved_eflags &= ~IF_MASK; } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { regs->eflags |= TF_MASK; regs->eflags &= ~IF_MASK; @@ -242,10 +242,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - if (regs->eflags & VM_MASK) { - /* We are in virtual-8086 mode. Return 0 */ - goto no_kprobe; - } if (*addr != BREAKPOINT_INSTRUCTION) { /* The breakpoint instruction was removed by * another cpu right after we hit, no further @@ -265,11 +261,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) p = get_kprobe(addr); if (!p) { - if (regs->eflags & VM_MASK) { - /* We are in virtual-8086 mode. Return 0 */ - goto no_kprobe; - } - if (*addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -452,10 +443,11 @@ static void __kprobes resume_execution(struct kprobe *p, *tos &= ~(TF_MASK | IF_MASK); *tos |= kcb->kprobe_old_eflags; break; - case 0xc3: /* ret/lret */ - case 0xcb: - case 0xc2: + case 0xc2: /* iret/ret/lret */ + case 0xc3: case 0xca: + case 0xcb: + case 0xcf: case 0xea: /* jmp absolute -- eip is correct */ /* eip is already adjusted, no more changes required */ p->ainsn.boostable = 1; @@ -463,10 +455,13 @@ static void __kprobes resume_execution(struct kprobe *p, case 0xe8: /* call relative - Fix return addr */ *tos = orig_eip + (*tos - copy_eip); break; + case 0x9a: /* call absolute -- same as call absolute, indirect */ + *tos = orig_eip + (*tos - copy_eip); + goto no_change; case 0xff: if ((p->ainsn.insn[1] & 0x30) == 0x10) { - /* call absolute, indirect */ /* + * call absolute, indirect * Fix return addr; eip is correct. * But this is not boostable */ @@ -507,7 +502,7 @@ no_change: * Interrupts are disabled on entry as trap1 is an interrupt gate and they * remain disabled thoroughout this function. */ -static inline int post_kprobe_handler(struct pt_regs *regs) +static int __kprobes post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); @@ -543,7 +538,7 @@ out: return 1; } -static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 34d21e21e012..6b1392d33ed5 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -1130,7 +1130,17 @@ int mp_register_gsi (u32 gsi, int triggering, int polarity) */ int irq = gsi; if (gsi < MAX_GSI_NUM) { - if (gsi > 15) + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0)) gsi = pci_irq++; /* * Don't assign IRQ used by ACPI SCI diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 1d0a55e68760..7a328230e540 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -251,7 +251,7 @@ static int msr_class_device_create(int i) return err; } -static int __devinit msr_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) +static int msr_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 506462ef36a0..fd7eaf7866e0 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -671,7 +671,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) if (unlikely(current->audit_context)) { if (entryexit) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax); /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is @@ -720,14 +720,13 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) ret = is_sysemu; out: if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax, + audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_eax, regs->ebx, regs->ecx, regs->edx, regs->esi); if (ret == 0) return 0; regs->orig_eax = -1; /* force skip of syscall restarting */ if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), - regs->eax); + audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax); return 1; } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 80cb3b2d0997..dd6b0e3386ce 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -970,8 +970,10 @@ efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg) * not-overlapping, which is the case */ int __init -e820_all_mapped(unsigned long start, unsigned long end, unsigned type) +e820_all_mapped(unsigned long s, unsigned long e, unsigned type) { + u64 start = s; + u64 end = e; int i; for (i = 0; i < e820.nr_map; i++) { struct e820entry *ei = &e820.map[i]; @@ -1318,6 +1320,8 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat probe_roms(); for (i = 0; i < e820.nr_map; i++) { struct resource *res; + if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) + continue; res = kzalloc(sizeof(struct resource), GFP_ATOMIC); switch (e820.map[i].type) { case E820_RAM: res->name = "System RAM"; break; @@ -1543,15 +1547,18 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); -#ifdef CONFIG_X86_IO_APIC - check_acpi_pci(); /* Checks more than just ACPI actually */ -#endif - #ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); +#endif + +#ifdef CONFIG_X86_IO_APIC + check_acpi_pci(); /* Checks more than just ACPI actually */ +#endif + +#ifdef CONFIG_ACPI acpi_boot_init(); #if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index a6969903f2d6..825b2b4ca721 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -313,7 +313,9 @@ static void __init synchronize_tsc_bp (void) if (tsc_values[i] < avg) realdelta = -realdelta; - printk(KERN_INFO "CPU#%d had %ld usecs TSC skew, fixed it up.\n", i, realdelta); + if (realdelta > 0) + printk(KERN_INFO "CPU#%d had %ld usecs TSC " + "skew, fixed it up.\n", i, realdelta); } sum += delta; diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S index 4f58b9c0efe3..af56987f69b0 100644 --- a/arch/i386/kernel/syscall_table.S +++ b/arch/i386/kernel/syscall_table.S @@ -314,3 +314,5 @@ ENTRY(sys_call_table) .long sys_get_robust_list .long sys_splice .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 5e41ee29c8cf..f1187ddb0d0f 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -279,7 +279,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, { struct cpufreq_freqs *freq = data; - if (val != CPUFREQ_RESUMECHANGE) + if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) write_seqlock_irq(&xtime_lock); if (!ref_freq) { if (!freq->old){ @@ -312,7 +312,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, } end: - if (val != CPUFREQ_RESUMECHANGE) + if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) write_sequnlock_irq(&xtime_lock); return 0; diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 2d22f5761b1d..0e498369f35e 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -130,9 +130,8 @@ static inline int print_addr_and_symbol(unsigned long addr, char *log_lvl, print_symbol("%s", addr); printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS; - if (printed) - printk(" "); + printk(" "); else printk("\n"); @@ -212,7 +211,6 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp, } stack = esp; - printk(log_lvl); for(i = 0; i < kstack_depth_to_print; i++) { if (kstack_end(stack)) break; diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index aee14fafd13d..00e0118e717c 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -312,7 +312,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk /*call audit_syscall_exit since we do not exit via the normal paths */ if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(eax), eax); + audit_syscall_exit(AUDITSC_RESULT(eax), eax); __asm__ __volatile__( "movl %0,%%esp\n\t" diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c index cea5b3ce4b57..d55fa7b187ab 100644 --- a/arch/i386/mach-generic/probe.c +++ b/arch/i386/mach-generic/probe.c @@ -93,9 +93,11 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid int i; for (i = 0; apic_probe[i]; ++i) { if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { - genapic = apic_probe[i]; - printk(KERN_INFO "Switched to APIC driver `%s'.\n", - genapic->name); + if (!cmdline_apic) { + genapic = apic_probe[i]; + printk(KERN_INFO "Switched to APIC driver `%s'.\n", + genapic->name); + } return 1; } } @@ -107,9 +109,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) int i; for (i = 0; apic_probe[i]; ++i) { if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { - genapic = apic_probe[i]; - printk(KERN_INFO "Switched to APIC driver `%s'.\n", - genapic->name); + if (!cmdline_apic) { + genapic = apic_probe[i]; + printk(KERN_INFO "Switched to APIC driver `%s'.\n", + genapic->name); + } return 1; } } diff --git a/arch/i386/mach-voyager/voyager_cat.c b/arch/i386/mach-voyager/voyager_cat.c index 3039539de51e..10d21df14531 100644 --- a/arch/i386/mach-voyager/voyager_cat.c +++ b/arch/i386/mach-voyager/voyager_cat.c @@ -120,7 +120,6 @@ static struct resource qic_res = { * It writes num_bits of the data buffer in msg starting at start_bit. * Note: This function assumes that any unused bit in the data stream * is set to zero so that the ors will work correctly */ -#define BITS_PER_BYTE 8 static void cat_pack(__u8 *msg, const __u16 start_bit, __u8 *data, const __u16 num_bits) { diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index ae6534ad8161..3df1371d4520 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -651,7 +651,7 @@ void __init mem_init(void) * Specifically, in the case of x86, we will always add * memory to the highmem for now. */ -#ifdef CONFIG_HOTPLUG_MEMORY +#ifdef CONFIG_MEMORY_HOTPLUG #ifndef CONFIG_NEED_MULTIPLE_NODES int add_memory(u64 start, u64 size) { diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 1a2076ce6f6a..ec0fd3cfa774 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -332,10 +332,11 @@ static int __init ppro_init(char ** cpu_type) { __u8 cpu_model = boot_cpu_data.x86_model; - if (cpu_model > 0xd) + if (cpu_model == 14) + *cpu_type = "i386/core"; + else if (cpu_model > 0xd) return 0; - - if (cpu_model == 9) { + else if (cpu_model == 9) { *cpu_type = "i386/p6_mobile"; } else if (cpu_model > 5) { *cpu_type = "i386/piii"; diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 3ca59cad05f3..06dab00aaadc 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -588,7 +588,9 @@ static __init int via_router_probe(struct irq_router *r, case PCI_DEVICE_ID_VIA_82C596: case PCI_DEVICE_ID_VIA_82C686: case PCI_DEVICE_ID_VIA_8231: + case PCI_DEVICE_ID_VIA_8233A: case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8237: /* FIXME: add new ones for 8233/5 */ r->name = "VIA"; r->get = pirq_via_get; diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index 50a0bef8c85f..79b2370c7fac 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -92,7 +92,7 @@ void __restore_processor_state(struct saved_context *ctxt) write_cr4(ctxt->cr4); write_cr3(ctxt->cr3); write_cr2(ctxt->cr2); - write_cr2(ctxt->cr0); + write_cr0(ctxt->cr0); /* * now restore the descriptor tables to their proper values diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9f40eeff0b5c..0f3076a820c3 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -413,6 +413,8 @@ config IA64_PALINFO config SGI_SN def_bool y if (IA64_SGI_SN2 || IA64_GENERIC) +source "drivers/sn/Kconfig" + source "drivers/firmware/Kconfig" source "fs/Kconfig.binfmt" diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index a718034d68d0..9ea35398e10d 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc5 -# Mon Feb 27 16:06:38 2006 +# Linux kernel version: 2.6.17-rc3 +# Thu Apr 27 11:48:23 2006 # # @@ -24,6 +24,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -38,10 +39,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -53,7 +50,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -62,6 +58,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -84,8 +81,10 @@ CONFIG_64BIT=y CONFIG_MMU=y CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y +CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y @@ -116,7 +115,6 @@ CONFIG_IA64_SGI_SN_XP=m CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=1024 -CONFIG_IA64_NR_NODES=256 # CONFIG_HOTPLUG_CPU is not set CONFIG_SCHED_SMT=y CONFIG_PREEMPT=y @@ -136,6 +134,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_NUMA=y +CONFIG_NODES_SHIFT=10 CONFIG_VIRTUAL_MEM_MAP=y CONFIG_HOLES_IN_ZONE=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y @@ -187,7 +186,6 @@ CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -231,6 +229,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m @@ -238,9 +237,11 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETFILTER is not set @@ -468,9 +469,14 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLA_FC is not set +CONFIG_SCSI_QLA_FC=y +CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y +# CONFIG_SCSI_QLA21XX is not set +CONFIG_SCSI_QLA22XX=y +CONFIG_SCSI_QLA2300=y +CONFIG_SCSI_QLA2322=y +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -486,6 +492,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set @@ -694,6 +701,7 @@ CONFIG_EFI_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=y +# CONFIG_AGP_VIA is not set CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m @@ -735,10 +743,6 @@ CONFIG_MMTIMER=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -747,6 +751,7 @@ CONFIG_MMTIMER=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -757,6 +762,7 @@ CONFIG_MMTIMER=y # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y # @@ -769,6 +775,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -829,9 +836,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -846,15 +851,6 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -905,15 +901,29 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m # @@ -923,8 +933,13 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # -# EDAC - error detection and reporting (RAS) +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -997,7 +1012,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1145,7 +1159,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index 4e7a6a1ec6c7..da03c06744f1 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -35,6 +35,9 @@ extern void ia64_elf32_init (struct pt_regs *regs); static void elf32_set_personality (void); +static unsigned long __attribute ((unused)) +randomize_stack_top(unsigned long stack_top); + #define setup_arg_pages(bprm,tos,exec) ia32_setup_arg_pages(bprm,exec) #define elf_map elf32_map diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 95fe04400f6b..a32cd59b81ed 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -334,7 +334,7 @@ ia32_syscall_table: data8 sys_setdomainname data8 sys32_newuname data8 sys32_modify_ldt - data8 sys_ni_syscall /* adjtimex */ + data8 compat_sys_adjtimex data8 sys32_mprotect /* 125 */ data8 compat_sys_sigprocmask data8 sys_ni_syscall /* create_module */ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 59e871dae742..09a0dbc17fb6 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \ irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \ salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \ - unwind.o mca.o mca_asm.o topology.o dmi_scan.o + unwind.o mca.o mca_asm.o topology.o obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o @@ -30,7 +30,6 @@ obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o mca_recovery-y += mca_drv.o mca_drv_asm.o -dmi_scan-y += ../../i386/kernel/dmi_scan.o # The gate DSO image is built using a special linker script. targets += gate.so gate-syms.o diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 6e16f6b35bd3..bcb80ca5cf40 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1609,5 +1609,7 @@ sys_call_table: data8 sys_set_robust_list data8 sys_get_robust_list data8 sys_sync_file_range // 1300 + data8 sys_tee + data8 sys_vmsplice .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 7956eb9058fc..d58c1c5c903a 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -416,7 +416,7 @@ iosapic_end_level_irq (unsigned int irq) ia64_vector vec = irq_to_vector(irq); struct iosapic_rte_info *rte; - move_irq(irq); + move_native_irq(irq); list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) iosapic_eoi(rte->addr, vec); } @@ -458,7 +458,7 @@ iosapic_ack_edge_irq (unsigned int irq) { irq_desc_t *idesc = irq_descp(irq); - move_irq(irq); + move_native_irq(irq); /* * Once we have recorded IRQ_PENDING already, we can mask the * interrupt for real. This prevents IRQ storms from unhandled diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 5ce908ef9c95..9c72ea3f6432 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -101,7 +101,6 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir) if (irq < NR_IRQS) { irq_affinity[irq] = mask; - set_irq_info(irq, mask); irq_redir[irq] = (char) (redir & 0xff); } } diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 789881ca83d4..f9039f88d01d 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -251,7 +251,7 @@ static void __kprobes prepare_break_inst(uint template, uint slot, update_kprobe_inst_flag(template, slot, major_opcode, kprobe_inst, p); } -static inline void get_kprobe_inst(bundle_t *bundle, uint slot, +static void __kprobes get_kprobe_inst(bundle_t *bundle, uint slot, unsigned long *kprobe_inst, uint *major_opcode) { unsigned long kprobe_inst_p0, kprobe_inst_p1; @@ -278,7 +278,7 @@ static inline void get_kprobe_inst(bundle_t *bundle, uint slot, } /* Returns non-zero if the addr is in the Interrupt Vector Table */ -static inline int in_ivt_functions(unsigned long addr) +static int __kprobes in_ivt_functions(unsigned long addr) { return (addr >= (unsigned long)__start_ivt_text && addr < (unsigned long)__end_ivt_text); @@ -308,19 +308,19 @@ static int __kprobes valid_kprobe_addr(int template, int slot, return 0; } -static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); kcb->prev_kprobe.status = kcb->kprobe_status; } -static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; kcb->kprobe_status = kcb->prev_kprobe.status; } -static inline void set_current_kprobe(struct kprobe *p, +static void __kprobes set_current_kprobe(struct kprobe *p, struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = p; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 5e6fdbe78bcd..6a0880639bc9 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -963,7 +963,7 @@ no_mod: */ static void -ia64_wait_for_slaves(int monarch) +ia64_wait_for_slaves(int monarch, const char *type) { int c, wait = 0, missing = 0; for_each_online_cpu(c) { @@ -989,7 +989,7 @@ ia64_wait_for_slaves(int monarch) } if (!missing) goto all_in; - printk(KERN_INFO "OS MCA slave did not rendezvous on cpu"); + printk(KERN_INFO "OS %s slave did not rendezvous on cpu", type); for_each_online_cpu(c) { if (c == monarch) continue; @@ -1000,7 +1000,7 @@ ia64_wait_for_slaves(int monarch) return; all_in: - printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n"); + printk(KERN_INFO "All OS %s slaves have reached rendezvous\n", type); return; } @@ -1038,7 +1038,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0) == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); - ia64_wait_for_slaves(cpu); + ia64_wait_for_slaves(cpu, "MCA"); /* Wakeup all the processors which are spinning in the rendezvous loop. * They will leave SAL, then spin in the OS with interrupts disabled @@ -1429,7 +1429,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, */ printk("Delaying for 5 seconds...\n"); udelay(5*1000000); - ia64_wait_for_slaves(cpu); + ia64_wait_for_slaves(cpu, "INIT"); /* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through * to default_monarch_init_process() above and just print all the * tasks. diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 37c88eb55873..ca6666b51ccb 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -62,6 +62,11 @@ typedef enum { ISOLATE_NONE } isolate_status_t; +typedef enum { + MCA_NOT_RECOVERED = 0, + MCA_RECOVERED = 1 +} recovery_status_t; + /* * This pool keeps pointers to the section part of SAL error record */ @@ -71,6 +76,18 @@ static struct { int max_idx; /* Maximum index of section pointer list pool */ } slidx_pool; +static int +fatal_mca(const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + vprintk(fmt, args); + va_end(args); + + return MCA_NOT_RECOVERED; +} + /** * mca_page_isolate - isolate a poisoned page in order not to use it later * @paddr: poisoned memory location @@ -424,7 +441,7 @@ recover_from_read_error(slidx_table_t *slidx, /* Is target address valid? */ if (!pbci->tv) - return 0; + return fatal_mca(KERN_ALERT "MCA: target address not valid\n"); /* * cpu read or memory-mapped io read @@ -442,7 +459,7 @@ recover_from_read_error(slidx_table_t *slidx, /* Is minstate valid? */ if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate)) - return 0; + return fatal_mca(KERN_ALERT "MCA: minstate not valid\n"); psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr); psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr); @@ -476,12 +493,13 @@ recover_from_read_error(slidx_table_t *slidx, psr2->bn = 1; psr2->i = 0; - return 1; + return MCA_RECOVERED; } } - return 0; + return fatal_mca(KERN_ALERT "MCA: kernel context not recovered," + " iip 0x%lx\n", pmsa->pmsa_iip); } /** @@ -567,13 +585,13 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, * The machine check is corrected. */ if (psp->cm == 1) - return 1; + return MCA_RECOVERED; /* * The error was not contained. Software must be reset. */ if (psp->us || psp->ci == 0) - return 0; + return fatal_mca(KERN_ALERT "MCA: error not contained\n"); /* * The cache check and bus check bits have four possible states @@ -584,20 +602,22 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, * 1 1 Memory error, attempt recovery */ if (psp->bc == 0 || pbci == NULL) - return 0; + return fatal_mca(KERN_ALERT "MCA: No bus check\n"); /* * Sorry, we cannot handle so many. */ if (peidx_bus_check_num(peidx) > 1) - return 0; + return fatal_mca(KERN_ALERT "MCA: Too many bus checks\n"); /* * Well, here is only one bus error. */ - if (pbci->ib || pbci->cc) - return 0; + if (pbci->ib) + return fatal_mca(KERN_ALERT "MCA: Internal Bus error\n"); + if (pbci->cc) + return fatal_mca(KERN_ALERT "MCA: Cache-cache error\n"); if (pbci->eb && pbci->bsi > 0) - return 0; + return fatal_mca(KERN_ALERT "MCA: External bus check fatal status\n"); /* * This is a local MCA and estimated as recoverble external bus error. @@ -609,7 +629,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, /* * On account of strange SAL error record, we cannot recover. */ - return 0; + return fatal_mca(KERN_ALERT "MCA: Strange SAL record\n"); } /** @@ -638,12 +658,10 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) /* Now, OS can recover when there is one processor error section */ if (n_proc_err > 1) - return 0; - else if (n_proc_err == 0) { + return fatal_mca(KERN_ALERT "MCA: Too Many Errors\n"); + else if (n_proc_err == 0) /* Weird SAL record ... We need not to recover */ - - return 1; - } + return fatal_mca(KERN_ALERT "MCA: Weird SAL record\n"); /* Make index of processor error section */ mca_make_peidx((sal_log_processor_info_t*) @@ -654,7 +672,7 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) /* Check whether MCA is global or not */ if (is_mca_global(&peidx, &pbci, sos)) - return 0; + return fatal_mca(KERN_ALERT "MCA: global MCA\n"); /* Try to recover a processor error */ return recover_from_processor_error(platform_err, &slidx, &peidx, diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 6386f63c413e..859fb37ff49b 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -959,7 +959,7 @@ remove_palinfo_proc_entries(unsigned int hcpu) } } -static int __devinit palinfo_cpu_callback(struct notifier_block *nfb, +static int palinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 9887c8787e7a..e61e15e28d8b 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -1644,7 +1644,7 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3, arch = AUDIT_ARCH_IA64; } - audit_syscall_entry(current, arch, syscall, arg0, arg1, arg2, arg3); + audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3); } } @@ -1662,7 +1662,7 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, if (success != AUDITSC_SUCCESS) result = -result; - audit_syscall_exit(current, success, result); + audit_syscall_exit(success, result); } if (test_thread_flag(TIF_SYSCALL_TRACE) diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 9d5a823479a3..663a186ad194 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -572,7 +572,7 @@ static struct file_operations salinfo_data_fops = { }; #ifdef CONFIG_HOTPLUG_CPU -static int __devinit +static int salinfo_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) { unsigned int i, cpu = (unsigned long)hcpu; diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index b47476d655f1..4f3a16b37f8f 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -305,13 +305,10 @@ static struct kobj_type cache_ktype_percpu_entry = { static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu) { - if (all_cpu_cache_info[cpu].cache_leaves) { - kfree(all_cpu_cache_info[cpu].cache_leaves); - all_cpu_cache_info[cpu].cache_leaves = NULL; - } + kfree(all_cpu_cache_info[cpu].cache_leaves); + all_cpu_cache_info[cpu].cache_leaves = NULL; all_cpu_cache_info[cpu].num_cache_leaves = 0; memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject)); - return; } @@ -429,7 +426,7 @@ static int __cpuinit cache_remove_dev(struct sys_device * sys_dev) * When a cpu is hot-plugged, do a check and initiate * cache kobject if necessary */ -static int __cpuinit cache_cpu_callback(struct notifier_block *nfb, +static int cache_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/ia64/lib/memcpy_mck.S b/arch/ia64/lib/memcpy_mck.S index 46c9331e7ab5..9e534d52b1d5 100644 --- a/arch/ia64/lib/memcpy_mck.S +++ b/arch/ia64/lib/memcpy_mck.S @@ -6,7 +6,9 @@ * in1: source address * in2: number of bytes to copy * Output: - * 0 if success, or number of byte NOT copied if error occurred. + * for memcpy: return dest + * for copy_user: return 0 if success, + * or number of byte NOT copied if error occurred. * * Copyright (C) 2002 Intel Corp. * Copyright (C) 2002 Ken Chen <kenneth.w.chen@intel.com> @@ -73,6 +75,7 @@ GLOBAL_ENTRY(memcpy) and r28=0x7,in0 and r29=0x7,in1 mov f6=f0 + mov retval=in0 br.cond.sptk .common_code ;; END(memcpy) @@ -84,7 +87,7 @@ GLOBAL_ENTRY(__copy_user) mov f6=f1 mov saved_in0=in0 // save dest pointer mov saved_in1=in1 // save src pointer - mov saved_in2=in2 // save len + mov retval=r0 // initialize return value ;; .common_code: cmp.gt p15,p0=8,in2 // check for small size @@ -92,7 +95,7 @@ GLOBAL_ENTRY(__copy_user) cmp.ne p14,p0=0,r29 // check src alignment add src0=0,in1 sub r30=8,r28 // for .align_dest - mov retval=r0 // initialize return value + mov saved_in2=in2 // save len ;; add dst0=0,in0 add dst1=1,in0 // dest odd index diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index ec9eeb89975d..b6bcc9fa3603 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -519,6 +519,68 @@ void __cpuinit *per_cpu_init(void) } #endif /* CONFIG_SMP */ +#ifdef CONFIG_VIRTUAL_MEM_MAP +static inline int find_next_valid_pfn_for_pgdat(pg_data_t *pgdat, int i) +{ + unsigned long end_address, hole_next_pfn; + unsigned long stop_address; + + end_address = (unsigned long) &vmem_map[pgdat->node_start_pfn + i]; + end_address = PAGE_ALIGN(end_address); + + stop_address = (unsigned long) &vmem_map[ + pgdat->node_start_pfn + pgdat->node_spanned_pages]; + + do { + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + + pgd = pgd_offset_k(end_address); + if (pgd_none(*pgd)) { + end_address += PGDIR_SIZE; + continue; + } + + pud = pud_offset(pgd, end_address); + if (pud_none(*pud)) { + end_address += PUD_SIZE; + continue; + } + + pmd = pmd_offset(pud, end_address); + if (pmd_none(*pmd)) { + end_address += PMD_SIZE; + continue; + } + + pte = pte_offset_kernel(pmd, end_address); +retry_pte: + if (pte_none(*pte)) { + end_address += PAGE_SIZE; + pte++; + if ((end_address < stop_address) && + (end_address != ALIGN(end_address, 1UL << PMD_SHIFT))) + goto retry_pte; + continue; + } + /* Found next valid vmem_map page */ + break; + } while (end_address < stop_address); + + end_address = min(end_address, stop_address); + end_address = end_address - (unsigned long) vmem_map + sizeof(struct page) - 1; + hole_next_pfn = end_address / sizeof(struct page); + return hole_next_pfn - pgdat->node_start_pfn; +} +#else +static inline int find_next_valid_pfn_for_pgdat(pg_data_t *pgdat, int i) +{ + return i + 1; +} +#endif + /** * show_mem - give short summary of memory stats * @@ -547,8 +609,10 @@ void show_mem(void) struct page *page; if (pfn_valid(pgdat->node_start_pfn + i)) page = pfn_to_page(pgdat->node_start_pfn + i); - else + else { + i = find_next_valid_pfn_for_pgdat(pgdat, i) - 1; continue; + } if (PageReserved(page)) reserved++; else if (PageSwapCache(page)) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9ba32b2d96d0..ab829a22f8a4 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -31,7 +31,6 @@ #include <asm/irq.h> #include <asm/hw_irq.h> - /* * Low-level SAL-based PCI configuration access functions. Note that SAL * calls are already serialized (via sal_lock), so we don't need another @@ -707,7 +706,7 @@ int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) * * Simply writes @size bytes of @val to @port. */ -int ia64_pci_legacy_write(struct pci_dev *bus, u16 port, u32 val, u8 size) +int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) { int ret = size; diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index d917afa30b27..739c948dc504 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -284,6 +284,8 @@ static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objb /* find nearest node with cpus and nearest memory */ for (router=NULL, j=0; j < op->ports; j++) { dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id); + if (dest && SN_HWPERF_IS_ROUTER(dest)) + router = dest; if (!dest || SN_HWPERF_FOREIGN(dest) || !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) { continue; @@ -299,8 +301,6 @@ static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objb *near_mem_node = c; found_mem++; } - if (SN_HWPERF_IS_ROUTER(dest)) - router = dest; } if (router && (!found_cpu || !found_mem)) { @@ -493,7 +493,7 @@ static int sn_topology_show(struct seq_file *s, void *d) * numalink ports */ sz = obj->ports * sizeof(struct sn_hwperf_port_info); - if ((ptdata = vmalloc(sz)) == NULL) + if ((ptdata = kmalloc(sz, GFP_KERNEL)) == NULL) return -ENOMEM; e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, SN_HWPERF_ENUM_PORTS, obj->id, sz, @@ -541,7 +541,7 @@ static int sn_topology_show(struct seq_file *s, void *d) (SN_HWPERF_IS_NL3ROUTER(obj) || SN_HWPERF_IS_NL3ROUTER(p)) ? "LLP3" : "LLP4"); } - vfree(ptdata); + kfree(ptdata); } return 0; diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 94211429fd0c..2a89cfce4954 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -136,9 +136,7 @@ xpc_get_rsvd_page_pa(int nasid) } if (L1_CACHE_ALIGN(len) > buf_len) { - if (buf_base != NULL) { - kfree(buf_base); - } + kfree(buf_base); buf_len = L1_CACHE_ALIGN(len); buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL, &buf_base); @@ -159,9 +157,7 @@ xpc_get_rsvd_page_pa(int nasid) } } - if (buf_base != NULL) { - kfree(buf_base); - } + kfree(buf_base); if (status != SALRET_OK) { rp_pa = 0; diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index fa073cc4b565..833295624e5d 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -682,9 +682,6 @@ tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) int ate_index, last_ate, ps; struct tioce *ce_mmr; - if (!TIOCE_M32_ADDR(base)) - return; - ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; ps = ce_kern->ce_ate3240_pagesize; ate_index = ATE_PAGE(base, ps); @@ -693,6 +690,9 @@ tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) if (ate_index < 64) ate_index = 64; + if (last_ate >= TIOCE_NUM_M3240_ATES) + last_ate = TIOCE_NUM_M3240_ATES - 1; + while (ate_index <= last_ate) { u64 ate; diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index 3871b65f0c82..920bb742b7a2 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -20,7 +20,7 @@ * Stack layout in 'ret_from_system_call': * ptrace needs to have all regs on the stack. * if the order here is changed, it needs to be - * updated in fork.c:copy_process, signal.c:do_signal, + * updated in fork.c:copy_thread, signal.c:do_signal, * ptrace.c and ptrace.h * * M32Rx/M32R2 M32R @@ -41,18 +41,17 @@ * @(0x38,sp) - syscall_nr ditto * @(0x3c,sp) - acc0h @(0x3c,sp) - acch * @(0x40,sp) - acc0l @(0x40,sp) - accl - * @(0x44,sp) - acc1h @(0x44,sp) - psw - * @(0x48,sp) - acc1l @(0x48,sp) - bpc - * @(0x4c,sp) - psw @(0x4c,sp) - bbpsw - * @(0x50,sp) - bpc @(0x50,sp) - bbpc - * @(0x54,sp) - bbpsw @(0x54,sp) - spu (cr3) - * @(0x58,sp) - bbpc @(0x58,sp) - fp (r13) - * @(0x5c,sp) - spu (cr3) @(0x5c,sp) - lr (r14) - * @(0x60,sp) - fp (r13) @(0x60,sp) - spi (cr12) - * @(0x64,sp) - lr (r14) @(0x64,sp) - orig_r0 - * @(0x68,sp) - spi (cr2) - * @(0x6c,sp) - orig_r0 - * + * @(0x44,sp) - acc1h @(0x44,sp) - dummy_acc1h + * @(0x48,sp) - acc1l @(0x48,sp) - dummy_acc1l + * @(0x4c,sp) - psw ditto + * @(0x50,sp) - bpc ditto + * @(0x54,sp) - bbpsw ditto + * @(0x58,sp) - bbpc ditto + * @(0x5c,sp) - spu (cr3) ditto + * @(0x60,sp) - fp (r13) ditto + * @(0x64,sp) - lr (r14) ditto + * @(0x68,sp) - spi (cr2) ditto + * @(0x6c,sp) - orig_r0 ditto */ #include <linux/config.h> @@ -102,6 +101,12 @@ #define ACC0L(reg) @(0x40,reg) #define ACC1H(reg) @(0x44,reg) #define ACC1L(reg) @(0x48,reg) +#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) +#define ACCH(reg) @(0x3C,reg) +#define ACCL(reg) @(0x40,reg) +#else +#error unknown isa configuration +#endif #define PSW(reg) @(0x4C,reg) #define BPC(reg) @(0x50,reg) #define BBPSW(reg) @(0x54,reg) @@ -111,21 +116,6 @@ #define LR(reg) @(0x64,reg) #define SP(reg) @(0x68,reg) #define ORIG_R0(reg) @(0x6C,reg) -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) -#define ACCH(reg) @(0x3C,reg) -#define ACCL(reg) @(0x40,reg) -#define PSW(reg) @(0x44,reg) -#define BPC(reg) @(0x48,reg) -#define BBPSW(reg) @(0x4C,reg) -#define BBPC(reg) @(0x50,reg) -#define SPU(reg) @(0x54,reg) -#define FP(reg) @(0x58,reg) /* FP = R13 */ -#define LR(reg) @(0x5C,reg) -#define SP(reg) @(0x60,reg) -#define ORIG_R0(reg) @(0x64,reg) -#else -#error unknown isa configuration -#endif CF_MASK = 0x00000001 TF_MASK = 0x00000100 @@ -142,7 +132,7 @@ VM_MASK = 0x00020000 #endif ENTRY(ret_from_fork) - ld r0, @sp+ + pop r0 bl schedule_tail GET_THREAD_INFO(r8) bra syscall_exit @@ -231,7 +221,7 @@ restore_all: RESTORE_ALL # perform work that needs to be done immediately before resumption - # r9 : frags + # r9 : flags ALIGN work_pending: and3 r4, r9, #_TIF_NEED_RESCHED @@ -320,7 +310,7 @@ ENTRY(ei_handler) ; GET_ICU_STATUS; seth r0, #shigh(M32R_ICU_ISTS_ADDR) ld r0, @(low(M32R_ICU_ISTS_ADDR),r0) - st r0, @-sp + push r0 #if defined(CONFIG_SMP) /* * If IRQ == 0 --> Nothing to do, Not write IMASK @@ -557,7 +547,7 @@ check_end: #endif /* CONFIG_PLAT_M32104UT */ bl do_IRQ #endif /* CONFIG_SMP */ - ld r14, @sp+ + pop r14 seth r0, #shigh(M32R_ICU_IMASK_ADDR) st r14, @(low(M32R_ICU_IMASK_ADDR),r0) #else @@ -1015,4 +1005,3 @@ ENTRY(sys_call_table) .long sys_waitid syscall_table_size=(.-sys_call_table) - diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index 5dfc7ea45cf7..065f5e719058 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -116,6 +116,10 @@ void cpu_idle (void) void machine_restart(char *__unused) { +#if defined(CONFIG_PLAT_MAPPI3) + outw(1, (unsigned long)PLD_REBOOT); +#endif + printk("Please push reset button!\n"); while (1) cpu_relax(); diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index cb33097fefc4..6498ee70bb73 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -118,6 +118,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) COPY(acch); COPY(accl); + COPY(dummy_acc1h); + COPY(dummy_acc1l); #else #error unknown isa configuration #endif @@ -203,6 +205,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) COPY(acch); COPY(accl); + COPY(dummy_acc1h); + COPY(dummy_acc1l); #else #error unknown isa configuration #endif diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7aec60d40420..e8ff09fe73d9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -13,7 +13,7 @@ choice default SGI_IP22 config MIPS_MTX1 - bool "Support for 4G Systems MTX-1 board" + bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI select SOC_AU1500 @@ -120,7 +120,7 @@ config MIPS_MIRAGE select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_COBALT - bool "Support for Cobalt Server" + bool "Cobalt Server" select DMA_NONCOHERENT select HW_HAS_PCI select I8259 @@ -132,7 +132,7 @@ config MIPS_COBALT select SYS_SUPPORTS_LITTLE_ENDIAN config MACH_DECSTATION - bool "Support for DECstations" + bool "DECstations" select BOOT_ELF32 select DMA_NONCOHERENT select EARLY_PRINTK @@ -158,7 +158,7 @@ config MACH_DECSTATION otherwise choose R3000. config MIPS_EV64120 - bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" + bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI @@ -175,7 +175,7 @@ config MIPS_EV64120 kernel for this platform. config MIPS_EV96100 - bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" + bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI @@ -195,7 +195,7 @@ config MIPS_EV96100 here if you wish to build a kernel for this platform. config MIPS_IVR - bool "Support for Globespan IVR board" + bool "Globespan IVR board" select DMA_NONCOHERENT select HW_HAS_PCI select ITE_BOARD_GEN @@ -211,7 +211,7 @@ config MIPS_IVR build a kernel for this platform. config MIPS_ITE8172 - bool "Support for ITE 8172G board" + bool "ITE 8172G board" select DMA_NONCOHERENT select HW_HAS_PCI select ITE_BOARD_GEN @@ -228,7 +228,7 @@ config MIPS_ITE8172 a kernel for this platform. config MACH_JAZZ - bool "Support for the Jazz family of machines" + bool "Jazz family of machines" select ARC select ARC32 select ARCH_MAY_HAVE_PC_FDC @@ -246,7 +246,7 @@ config MACH_JAZZ Olivetti M700-10 workstations. config LASAT - bool "Support for LASAT Networks platforms" + bool "LASAT Networks platforms" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 @@ -258,7 +258,7 @@ config LASAT select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_ATLAS - bool "Support for MIPS Atlas board" + bool "MIPS Atlas board" select BOOT_ELF32 select DMA_NONCOHERENT select IRQ_CPU @@ -283,7 +283,7 @@ config MIPS_ATLAS board. config MIPS_MALTA - bool "Support for MIPS Malta board" + bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select HAVE_STD_PC_SERIAL_PORT @@ -311,7 +311,7 @@ config MIPS_MALTA board. config MIPS_SEAD - bool "Support for MIPS SEAD board (EXPERIMENTAL)" + bool "MIPS SEAD board (EXPERIMENTAL)" depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT @@ -328,7 +328,7 @@ config MIPS_SEAD board. config MIPS_SIM - bool 'Support for MIPS simulator (MIPSsim)' + bool 'MIPS simulator (MIPSsim)' select DMA_NONCOHERENT select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 @@ -341,7 +341,7 @@ config MIPS_SIM emulator. config MOMENCO_JAGUAR_ATX - bool "Support for Momentum Jaguar board" + bool "Momentum Jaguar board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI @@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX Momentum Computer <http://www.momenco.com/>. config MOMENCO_OCELOT - bool "Support for Momentum Ocelot board" + bool "Momentum Ocelot board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -378,7 +378,7 @@ config MOMENCO_OCELOT Momentum Computer <http://www.momenco.com/>. config MOMENCO_OCELOT_3 - bool "Support for Momentum Ocelot-3 board" + bool "Momentum Ocelot-3 board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI @@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3 PMC-Sierra Rm79000 core. config MOMENCO_OCELOT_C - bool "Support for Momentum Ocelot-C board" + bool "Momentum Ocelot-C board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C Momentum Computer <http://www.momenco.com/>. config MOMENCO_OCELOT_G - bool "Support for Momentum Ocelot-G board" + bool "Momentum Ocelot-G board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G Momentum Computer <http://www.momenco.com/>. config MIPS_XXS1500 - bool "Support for MyCable XXS1500 board" + bool "MyCable XXS1500 board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_V2PCI - bool "Support for Philips PNX8550 based Viper2-PCI board" + bool "Philips PNX8550 based Viper2-PCI board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_JBS - bool "Support for Philips PNX8550 based JBS board" + bool "Philips PNX8550 based JBS board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config DDB5074 - bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" + bool "NEC DDB Vrc-5074 (EXPERIMENTAL)" depends on EXPERIMENTAL select DDB5XXX_COMMON select DMA_NONCOHERENT @@ -465,7 +465,7 @@ config DDB5074 evaluation board. config DDB5476 - bool "Support for NEC DDB Vrc-5476" + bool "NEC DDB Vrc-5476" select DDB5XXX_COMMON select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT @@ -486,7 +486,7 @@ config DDB5476 IDE controller, PS2 keyboard, PS2 mouse, etc. config DDB5477 - bool "Support for NEC DDB Vrc-5477" + bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON select DMA_NONCOHERENT select HW_HAS_PCI @@ -504,13 +504,13 @@ config DDB5477 ether port USB, AC97, PCI, etc. config MACH_VR41XX - bool "Support for NEC VR4100 series based machines" + bool "NEC VR41XX-based machines" select SYS_HAS_CPU_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL config PMC_YOSEMITE - bool "Support for PMC-Sierra Yosemite eval board" + bool "PMC-Sierra Yosemite eval board" select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU @@ -527,7 +527,7 @@ config PMC_YOSEMITE manufactured by PMC-Sierra. config QEMU - bool "Support for Qemu" + bool "Qemu" select DMA_COHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT @@ -547,7 +547,7 @@ config QEMU can be found at http://www.linux-mips.org/wiki/Qemu. config SGI_IP22 - bool "Support for SGI IP22 (Indy/Indigo2)" + bool "SGI IP22 (Indy/Indigo2)" select ARC select ARC32 select BOOT_ELF32 @@ -567,7 +567,7 @@ config SGI_IP22 that runs on these, say Y here. config SGI_IP27 - bool "Support for SGI IP27 (Origin200/2000)" + bool "SGI IP27 (Origin200/2000)" select ARC select ARC64 select BOOT_ELF64 @@ -583,7 +583,7 @@ config SGI_IP27 here. config SGI_IP32 - bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" + bool "SGI IP32 (O2) (EXPERIMENTAL)" depends on EXPERIMENTAL select ARC select ARC32 @@ -604,7 +604,7 @@ config SGI_IP32 If you want this kernel to run on SGI O2 workstation, say Y here. config SIBYTE_BIGSUR - bool "Support for Sibyte BCM91480B-BigSur" + bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 select DMA_COHERENT select PCI_DOMAINS @@ -615,7 +615,7 @@ config SIBYTE_BIGSUR select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SWARM - bool "Support for Sibyte BCM91250A-SWARM" + bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT select SIBYTE_SB1250 @@ -626,7 +626,7 @@ config SIBYTE_SWARM select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SENTOSA - bool "Support for Sibyte BCM91250E-Sentosa" + bool "Sibyte BCM91250E-Sentosa" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -637,7 +637,7 @@ config SIBYTE_SENTOSA select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_RHONE - bool "Support for Sibyte BCM91125E-Rhone" + bool "Sibyte BCM91125E-Rhone" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -648,7 +648,7 @@ config SIBYTE_RHONE select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CARMEL - bool "Support for Sibyte BCM91120x-Carmel" + bool "Sibyte BCM91120x-Carmel" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -659,7 +659,7 @@ config SIBYTE_CARMEL select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_PTSWARM - bool "Support for Sibyte BCM91250PT-PTSWARM" + bool "Sibyte BCM91250PT-PTSWARM" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -671,7 +671,7 @@ config SIBYTE_PTSWARM select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_LITTLESUR - bool "Support for Sibyte BCM91250C2-LittleSur" + bool "Sibyte BCM91250C2-LittleSur" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CRHINE - bool "Support for Sibyte BCM91120C-CRhine" + bool "Sibyte BCM91120C-CRhine" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -694,7 +694,7 @@ config SIBYTE_CRHINE select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CRHONE - bool "Support for Sibyte BCM91125C-CRhone" + bool "Sibyte BCM91125C-CRhone" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -706,7 +706,7 @@ config SIBYTE_CRHONE select SYS_SUPPORTS_LITTLE_ENDIAN config SNI_RM200_PCI - bool "Support for SNI RM200 PCI" + bool "SNI RM200 PCI" select ARC select ARC32 select ARCH_MAY_HAVE_PC_FDC @@ -732,7 +732,7 @@ config SNI_RM200_PCI support this machine type. config TOSHIBA_JMR3927 - bool "Support for Toshiba JMR-TX3927 board" + bool "Toshiba JMR-TX3927 board" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_TX3927 @@ -743,7 +743,7 @@ config TOSHIBA_JMR3927 select TOSHIBA_BOARDS config TOSHIBA_RBTX4927 - bool "Support for Toshiba TBTX49[23]7 board" + bool "Toshiba TBTX49[23]7 board" select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI @@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927 support this machine type config TOSHIBA_RBTX4938 - bool "Support for Toshiba RBTX4938 board" + bool "Toshiba RBTX4938 board" select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT select GENERIC_ISA_DMA @@ -816,6 +816,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + # # Select some configuration options automatically based on user selections. # @@ -1063,6 +1067,7 @@ choice config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1080,6 +1085,7 @@ config CPU_MIPS32_R1 config CPU_MIPS32_R2 bool "MIPS32 Release 2" depends on SYS_HAS_CPU_MIPS32_R2 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1093,6 +1099,7 @@ config CPU_MIPS32_R2 config CPU_MIPS64_R1 bool "MIPS64 Release 1" depends on SYS_HAS_CPU_MIPS64_R1 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1111,6 +1118,7 @@ config CPU_MIPS64_R1 config CPU_MIPS64_R2 bool "MIPS64 Release 2" depends on SYS_HAS_CPU_MIPS64_R2 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1125,6 +1133,7 @@ config CPU_MIPS64_R2 config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 + select CPU_HAS_WB select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM help @@ -1154,6 +1163,7 @@ config CPU_VR41XX config CPU_R4300 bool "R4300" depends on SYS_HAS_CPU_R4300 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1162,6 +1172,7 @@ config CPU_R4300 config CPU_R4X00 bool "R4x00" depends on SYS_HAS_CPU_R4X00 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1171,6 +1182,7 @@ config CPU_R4X00 config CPU_TX49XX bool "R49XX" depends on SYS_HAS_CPU_TX49XX + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1178,6 +1190,7 @@ config CPU_TX49XX config CPU_R5000 bool "R5000" depends on SYS_HAS_CPU_R5000 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1186,12 +1199,14 @@ config CPU_R5000 config CPU_R5432 bool "R5432" depends on SYS_HAS_CPU_R5432 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL config CPU_R6000 bool "R6000" depends on EXPERIMENTAL + select CPU_HAS_LLSC depends on SYS_HAS_CPU_R6000 select CPU_SUPPORTS_32BIT_KERNEL help @@ -1201,6 +1216,7 @@ config CPU_R6000 config CPU_NEVADA bool "RM52xx" depends on SYS_HAS_CPU_NEVADA + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1210,6 +1226,7 @@ config CPU_R8000 bool "R8000" depends on EXPERIMENTAL depends on SYS_HAS_CPU_R8000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL help @@ -1219,6 +1236,7 @@ config CPU_R8000 config CPU_R10000 bool "R10000" depends on SYS_HAS_CPU_R10000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1229,6 +1247,7 @@ config CPU_R10000 config CPU_RM7000 bool "RM7000" depends on SYS_HAS_CPU_RM7000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1237,6 +1256,7 @@ config CPU_RM7000 config CPU_RM9000 bool "RM9000" depends on SYS_HAS_CPU_RM9000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1245,6 +1265,7 @@ config CPU_RM9000 config CPU_SB1 bool "SB1" depends on SYS_HAS_CPU_SB1 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1390,13 +1411,12 @@ config PAGE_SIZE_8KB config PAGE_SIZE_16KB bool "16kB" - depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX + depends on !CPU_R3000 && !CPU_TX39XX help Using 16kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on - all non-R3000 family processor. Not that at the time of this - writing this option is still high experimental; there are also - issues with compatibility of user applications. + all non-R3000 family processors. Note that you will need a suitable + Linux distribution to support this. config PAGE_SIZE_64KB bool "64kB" @@ -1405,8 +1425,7 @@ config PAGE_SIZE_64KB Using 64kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on all non-R3000 family processor. Not that at the time of this - writing this option is still high experimental; there are also - issues with compatibility of user applications. + writing this option is still high experimental. endchoice @@ -1443,6 +1462,12 @@ choice prompt "MIPS MT options" depends on MIPS_MT +config MIPS_MT_SMTC + bool "SMTC: Use all TCs on all VPEs for SMP" + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_SRS + select SMP + config MIPS_MT_SMP bool "Use 1 TC on each available VPE for SMP" select SMP @@ -1456,6 +1481,11 @@ config MIPS_VPE_LOADER endchoice +config MIPS_MT_FPAFF + bool "Dynamic FPU affinity for FP-intensive threads" + depends on MIPS_MT + default y + config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" depends on MIPS_VPE_LOADER @@ -1472,6 +1502,16 @@ config MIPS_VPE_APSP_API depends on MIPS_VPE_LOADER help +config MIPS_APSP_KSPD + bool "Enable KSPD" + depends on MIPS_VPE_APSP_API + default y + help + KSPD is a kernel daemon that accepts syscall requests from the SP + side, actions them and returns the results. It also handles the + "exit" syscall notifying other kernel modules the SP program is + exiting. You probably want to say yes here. + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 @@ -1491,38 +1531,15 @@ config 64BIT_PHYS_ADDR bool "Support for 64-bit physical address space" depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT -config CPU_ADVANCED - bool "Override CPU Options" - depends on 32BIT - help - Saying yes here allows you to select support for various features - your CPU may or may not have. Most people should say N here. - config CPU_HAS_LLSC - bool "ll/sc Instructions available" if CPU_ADVANCED - default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX - help - MIPS R4000 series and later provide the Load Linked (ll) - and Store Conditional (sc) instructions. More information is - available at <http://www.go-ecs.com/mips/miptek1.htm>. - - Say Y here if your CPU has the ll and sc instructions. Say Y here - for better performance, N if you don't know. You must say Y here - for multiprocessor machines. + bool config CPU_HAS_WB - bool "Writeback Buffer available" if CPU_ADVANCED - default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION - help - Say N here for slightly better performance. You must say Y here for - machines which require flushing of write buffers in software. Saying - Y is the safe option; N may result in kernel malfunction and crashes. - -menu "MIPSR2 Interrupt handling" - depends on CPU_MIPSR2 && CPU_ADVANCED + bool config CPU_MIPSR2_IRQ_VI bool "Vectored interrupt mode" + depends on CPU_MIPSR2 help Vectored interrupt mode allowing faster dispatching of interrupts. The board support code needs to be written to take advantage of this @@ -1532,6 +1549,7 @@ config CPU_MIPSR2_IRQ_VI config CPU_MIPSR2_IRQ_EI bool "External interrupt controller mode" + depends on CPU_MIPSR2 help Extended interrupt mode takes advantage of an external interrupt controller to allow fast dispatching from many possible interrupt @@ -1545,7 +1563,6 @@ config CPU_MIPSR2_SRS Allow the kernel to use shadow register sets for fast interrupts. Interrupt handlers must be specially written to use shadow sets. Say N unless you know that shadow register set upport is needed. -endmenu config CPU_HAS_SYNC bool @@ -1599,7 +1616,7 @@ source "mm/Kconfig" config SMP bool "Multi-Processing support" - depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP + depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index d3c5cc3b9c9d..515f9e611307 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -6,7 +6,13 @@ config CROSSCOMPILE bool "Are you using a crosscompiler" help Say Y here if you are compiling the kernel on a different - architecture than the one it is intended to run on. + architecture than the one it is intended to run on. This is just a + convenience option which will select the appropriate value for + the CROSS_COMPILE make variable which otherwise has to be passed on + the command line from mips-linux-, mipsel-linux-, mips64-linux- and + mips64el-linux- as appropriate for a particular kernel configuration. + You will have to pass the value for CROSS_COMPILE manually if the + name prefix for your tools is different. config CMDLINE string "Default kernel command string" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9a69e0f0ab76..133900aca992 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -105,18 +105,18 @@ cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \ +cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \ +cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32r2 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \ +cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ -Wa,-mips64 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \ +cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ -Wa,-mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap -cflags-$(CONFIG_CPU_R5432) += $(call cc-options,-march=r5400,-march=r5000) \ +cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -Wa,--trap -cflags-$(CONFIG_CPU_NEVADA) += $(call cc-options,-march=rm5200,-march=r5000) \ +cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ -Wa,--trap @@ -615,7 +615,10 @@ LDFLAGS += -m $(ld-emul) ifdef CONFIG_MIPS CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \ egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \ - sed -e 's/^\#define /-D/' -e 's/ /="/' -e 's/$$/"/') + sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/") +ifdef CONFIG_64BIT +CHECKFLAGS += -m64 +endif endif OBJCOPYFLAGS += --remove-section=.reginfo diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index a1edfd1f643c..bf682f50b859 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -6,7 +6,7 @@ # Makefile for the Alchemy Au1000 CPU, generic files. # -obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \ +obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o diff --git a/arch/mips/au1000/common/int-handler.S b/arch/mips/au1000/common/int-handler.S deleted file mode 100644 index 1c4ca883321e..000000000000 --- a/arch/mips/au1000/common/int-handler.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: ppopov@mvista.com - * - * Interrupt dispatcher for Au1000 boards. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .text - .set macro - .set noat - .align 5 - -NESTED(au1000_IRQ, PT_SIZE, sp) - SAVE_ALL - CLI # Important: mark KERNEL mode ! - - mfc0 t0,CP0_CAUSE # get pending interrupts - mfc0 t1,CP0_STATUS # get enabled interrupts - and t0,t1 # isolate allowed ones - - andi t0,0xff00 # isolate pending bits - beqz t0, 3f # spurious interrupt - - andi a0, t0, CAUSEF_IP7 - beq a0, zero, 1f - move a0, sp - jal mips_timer_interrupt - j ret_from_irq - -1: - andi a0, t0, CAUSEF_IP2 # Interrupt Controller 0, Request 0 - beq a0, zero, 2f - move a0,sp - jal intc0_req0_irqdispatch - j ret_from_irq -2: - andi a0, t0, CAUSEF_IP3 # Interrupt Controller 0, Request 1 - beq a0, zero, 3f - move a0,sp - jal intc0_req1_irqdispatch - j ret_from_irq -3: - andi a0, t0, CAUSEF_IP4 # Interrupt Controller 1, Request 0 - beq a0, zero, 4f - move a0,sp - jal intc1_req0_irqdispatch - j ret_from_irq -4: - andi a0, t0, CAUSEF_IP5 # Interrupt Controller 1, Request 1 - beq a0, zero, 5f - move a0, sp - jal intc1_req1_irqdispatch - j ret_from_irq - -5: - move a0, sp - j spurious_interrupt -END(au1000_IRQ) diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 1339a0979f66..afe05ec12c27 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -66,9 +66,9 @@ #define EXT_INTC1_REQ1 5 /* IP 5 */ #define MIPS_TIMER_IP 7 /* IP 7 */ -extern asmlinkage void au1000_IRQ(void); extern void set_debug_traps(void); extern irq_cpustat_t irq_stat [NR_CPUS]; +extern void mips_timer_interrupt(struct pt_regs *regs); static void setup_local_irq(unsigned int irq, int type, int int_req); static unsigned int startup_irq(unsigned int irq); @@ -446,7 +446,6 @@ void __init arch_init_irq(void) extern int au1xxx_ic0_nr_irqs; cp0_status = read_c0_status(); - set_except_vector(0, au1000_IRQ); /* Initialize interrupt controllers to a safe state. */ @@ -661,3 +660,21 @@ restore_au1xxx_intctl(void) au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); } #endif /* CONFIG_PM */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & CAUSEF_IP7) + mips_timer_interrupt(regs); + else if (pending & CAUSEF_IP2) + intc0_req0_irqdispatch(regs); + else if (pending & CAUSEF_IP3) + intc0_req1_irqdispatch(regs); + else if (pending & CAUSEF_IP4) + intc1_req0_irqdispatch(regs); + else if (pending & CAUSEF_IP5) + intc1_req1_irqdispatch(regs); + else + spurious_interrupt(regs); +} diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c index 9c171afd9a53..ae7d8c57bf3f 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/au1000/common/prom.c @@ -1,10 +1,9 @@ /* * * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming a version of - * pmon is the boot code. + * PROM library initialisation code, assuming YAMON is the boot loader. * - * Copyright 2000,2001 MontaVista Software Inc. + * Copyright 2000, 2001, 2006 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * @@ -49,9 +48,9 @@ extern char **prom_argv, **prom_envp; typedef struct { - char *name; -/* char *val; */ -}t_env_var; + char *name; + char *val; +} t_env_var; char * prom_getcmdline(void) @@ -85,21 +84,16 @@ char *prom_getenv(char *envname) { /* * Return a pointer to the given environment variable. - * Environment variables are stored in the form of "memsize=64". */ t_env_var *env = (t_env_var *)prom_envp; - int i; - - i = strlen(envname); - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { - return(env->name + strlen(envname) + 1); - } + while (env->name) { + if (strcmp(envname, env->name) == 0) + return env->val; env++; } - return(NULL); + return NULL; } inline unsigned char str2hexnum(unsigned char c) diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/au1000/common/sleeper.S index 44dac3b0df3b..683d9da84b66 100644 --- a/arch/mips/au1000/common/sleeper.S +++ b/arch/mips/au1000/common/sleeper.S @@ -112,6 +112,11 @@ sdsleep: mtc0 k0, CP0_PAGEMASK lw k0, 0x14(sp) mtc0 k0, CP0_CONFIG + + /* We need to catch the ealry Alchemy SOCs with + * the write-only Config[OD] bit and set it back to one... + */ + jal au1x00_fixup_config_od lw $1, PT_R1(sp) lw $2, PT_R2(sp) lw $3, PT_R3(sp) diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index f85f1524b366..f74d66a58a21 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs) null: ack_r4ktimer(0); + irq_exit(); } #ifdef CONFIG_PM diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 720e757b2b64..225ac8f34ccd 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,7 +2,7 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := irq.o int-handler.o reset.o setup.o +obj-y := irq.o reset.o setup.o obj-$(CONFIG_EARLY_PRINTK) += console.o diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S deleted file mode 100644 index e75d5e3ca868..000000000000 --- a/arch/mips/cobalt/int-handler.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle - * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/mach-cobalt/cobalt.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .text - .align 5 - NESTED(cobalt_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - - PTR_LA ra, ret_from_irq - move a0, sp - j cobalt_irq - - END(cobalt_handle_int) diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index f9a108820d6e..0b75f4fb7195 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -20,8 +20,6 @@ #include <asm/mach-cobalt/cobalt.h> -extern void cobalt_handle_int(void); - /* * We have two types of interrupts that we handle, ones that come in through * the CPU interrupt lines, and ones that come in on the via chip. The CPU @@ -79,7 +77,7 @@ static inline void via_pic_irq(struct pt_regs *regs) do_IRQ(irq, regs); } -asmlinkage void cobalt_irq(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { unsigned pending; @@ -122,8 +120,6 @@ void __init arch_init_irq(void) */ GALILEO_OUTL(0, GT_INTRMASK_OFS); - set_except_vector(0, cobalt_handle_int); - init_i8259_irqs(); /* 0 ... 15 */ mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 9e1ae953e966..4b080bcb258f 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:52 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:55 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_ATLAS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -127,11 +129,11 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -149,7 +151,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -165,6 +166,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -178,10 +180,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -193,7 +191,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -202,6 +199,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -221,7 +220,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -249,6 +247,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -281,6 +280,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -322,9 +322,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -348,11 +351,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m @@ -376,20 +382,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -407,6 +412,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -427,12 +433,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -478,6 +482,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m @@ -492,11 +501,6 @@ CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -556,6 +560,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -694,9 +701,8 @@ CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -715,6 +721,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -921,6 +928,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -930,6 +938,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -988,10 +997,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -1022,6 +1027,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -1039,13 +1045,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1120,7 +1144,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1140,7 +1163,6 @@ CONFIG_VXFS_FS=m # CONFIG_QNX4FS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1232,6 +1254,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 32984100a75e..d85cda58d650 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:53 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:55 2006 # CONFIG_MIPS=y @@ -80,6 +80,8 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_SB1250_PROF is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -154,7 +156,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -172,6 +173,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -186,10 +188,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -201,7 +199,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -210,6 +207,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -230,7 +228,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_DEBUG=y CONFIG_MMU=y @@ -249,6 +246,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_BUILD_ELF64=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -263,6 +261,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -284,12 +283,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -301,6 +303,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -310,11 +317,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -377,7 +379,7 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -575,6 +577,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -637,7 +640,6 @@ CONFIG_I2C_ALGO_SIBYTE=y # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set CONFIG_I2C_SIBYTE=y -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -656,9 +658,7 @@ CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_PCF8574=y CONFIG_SENSORS_PCA9539=y CONFIG_SENSORS_PCF8591=y -CONFIG_SENSORS_RTC8564=y CONFIG_SENSORS_MAX6875=y -# CONFIG_RTC_X1205_I2C is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -686,10 +686,6 @@ CONFIG_I2C_DEBUG_CHIP=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -714,6 +710,7 @@ CONFIG_I2C_DEBUG_CHIP=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -731,13 +728,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -785,7 +800,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 6c2961affbd6..ca0af1683a00 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:54 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:06 2006 # CONFIG_MIPS=y @@ -72,6 +72,8 @@ CONFIG_ZAO_CAPCELLA=y CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -90,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -103,18 +105,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -179,7 +180,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -187,6 +187,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -206,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -224,6 +226,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -233,6 +236,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -255,12 +259,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -272,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -281,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -302,10 +309,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -348,10 +352,12 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -578,6 +584,11 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -601,6 +612,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Ftape, the floppy tape device driver # # CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -636,10 +648,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -670,6 +678,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -687,13 +696,48 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers # +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_VR41XX=y +# CONFIG_RTC_DRV_TEST is not set # # File systems @@ -712,7 +756,7 @@ CONFIG_EXT2_FS=y CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m @@ -735,10 +779,9 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -805,44 +848,20 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -852,8 +871,6 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_LIBCRC32C is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 8336b21d3db2..7d269e609282 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:55 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:57 2006 # CONFIG_MIPS=y @@ -63,7 +63,10 @@ CONFIG_MIPS_COBALT=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -113,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -135,7 +137,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +152,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,6 +180,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -201,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -229,6 +228,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -247,12 +247,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -264,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -273,11 +281,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -298,6 +301,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -343,7 +349,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -593,6 +599,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -602,6 +609,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -660,10 +668,6 @@ CONFIG_COBALT_LCD=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -694,6 +698,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -711,13 +716,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -765,7 +788,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -828,6 +850,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 7f071403c8e3..579b665e3339 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:56 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:57 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1000=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +153,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +167,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +179,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -190,6 +187,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -245,6 +244,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -267,7 +267,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -278,6 +279,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -294,10 +297,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -321,6 +327,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -330,11 +341,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -356,6 +362,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -412,7 +421,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -434,7 +442,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -471,7 +478,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -722,10 +729,6 @@ CONFIG_SYNCLINK_CS=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -756,6 +759,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # @@ -773,12 +777,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -836,7 +858,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -945,6 +966,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 98590cac1ec5..e5eb53867422 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:57 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:58 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +153,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +167,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +179,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -190,6 +187,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -234,6 +233,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -256,7 +256,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -267,6 +268,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -283,10 +286,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -310,6 +316,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -319,11 +330,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -345,6 +351,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -401,7 +410,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -423,7 +431,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -460,7 +467,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -690,10 +697,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -711,6 +714,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -755,6 +759,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # @@ -772,12 +777,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -835,7 +858,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -944,6 +966,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 92888472dca0..a43fb2329fd5 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:58 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:58 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1200=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -244,6 +243,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -263,7 +263,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -274,6 +275,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -288,10 +291,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -315,6 +321,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -324,11 +335,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -403,7 +409,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -425,7 +430,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -763,10 +767,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -784,6 +784,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -794,6 +795,7 @@ CONFIG_FB_AU1200=y # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set @@ -816,6 +818,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -832,6 +835,7 @@ CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set @@ -844,12 +848,30 @@ CONFIG_MMC_BLOCK=y CONFIG_MMC_AU1X=y # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -913,7 +935,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1027,6 +1048,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 5a415b1d4af0..ad632d87c4ef 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:59 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:59 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1500=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -116,11 +118,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -138,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,7 +181,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -192,6 +189,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -211,7 +210,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -253,6 +251,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -364,6 +369,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -486,7 +492,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -714,6 +720,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -725,6 +732,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -790,10 +798,6 @@ CONFIG_SYNCLINK_CS=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -802,6 +806,7 @@ CONFIG_SYNCLINK_CS=m # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -825,9 +830,11 @@ CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -846,6 +853,7 @@ CONFIG_SND_MTPAV=m # PCI devices # # CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -877,6 +885,7 @@ CONFIG_SND_MTPAV=m # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -905,34 +914,22 @@ CONFIG_SND_AU1X00=m # Open Sound System # CONFIG_SOUND_PRIME=y -CONFIG_OBSOLETE_OSS_DRIVER=y # CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ESSSOLO1 is not set -# CONFIG_SOUND_MAESTRO is not set -# CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_AU1000 is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set -# CONFIG_SOUND_ALI5455 is not set -# CONFIG_SOUND_FORTE is not set -# CONFIG_SOUND_RME96XX is not set -# CONFIG_SOUND_AD1980 is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -958,7 +955,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -985,9 +981,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set CONFIG_USB_YEALINK=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1001,15 +995,6 @@ CONFIG_USB_YEALINK=m # CONFIG_USB_MDC800 is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1059,13 +1044,31 @@ CONFIG_USB_LD=m # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1123,7 +1126,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1232,6 +1234,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 8dc1f18badfe..8130e23dc255 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:00 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:00 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1550=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -252,6 +250,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -274,7 +273,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,6 +285,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -301,10 +303,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -328,6 +333,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -337,11 +347,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -363,6 +368,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -419,7 +427,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -442,7 +449,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -489,7 +495,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -754,6 +760,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -765,6 +772,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -830,10 +838,6 @@ CONFIG_SYNCLINK_CS=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -858,6 +862,7 @@ CONFIG_SYNCLINK_CS=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -875,13 +880,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -939,7 +962,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1048,6 +1070,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index 8fae63e47e5e..8d88ac1bbfeb 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:02 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:00 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_DDB5476=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -136,7 +137,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +152,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,6 +180,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -202,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_ISA=y CONFIG_MMU=y @@ -231,6 +229,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -252,12 +251,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -269,6 +271,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -278,11 +285,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -303,6 +305,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -348,7 +353,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -571,6 +576,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -580,6 +586,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -638,10 +645,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -659,6 +662,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -670,7 +674,6 @@ CONFIG_FB=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -708,6 +711,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -725,13 +729,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -776,7 +798,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -840,6 +861,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any" diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index a0fcd44e7709..8c911b671415 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:02 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:01 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_DDB5477=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_DDB5477_BUS_FREQUENCY=0 CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -136,7 +137,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +152,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,6 +180,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -202,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -230,6 +228,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -251,12 +250,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -268,6 +270,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -277,11 +284,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -302,6 +304,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -346,7 +351,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -556,6 +561,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -565,6 +571,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -623,10 +630,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -657,6 +660,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -674,13 +678,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -725,7 +747,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -792,6 +813,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any" diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 5a181eadd437..d838496e114f 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:03 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:01 2006 # CONFIG_MIPS=y @@ -63,11 +63,13 @@ CONFIG_MACH_DECSTATION=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -113,7 +115,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_WB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,7 +136,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +151,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -180,7 +177,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -189,6 +185,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -233,11 +231,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -254,12 +251,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -271,6 +271,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -280,11 +285,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -305,6 +305,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -345,7 +348,7 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -567,10 +570,6 @@ CONFIG_RTC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -588,6 +587,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -617,6 +617,7 @@ CONFIG_LOGO_DEC_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -633,12 +634,30 @@ CONFIG_LOGO_DEC_CLUT224=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -686,7 +705,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -705,7 +723,6 @@ CONFIG_RELAYFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=y -CONFIG_UFS_FS_WRITE=y # # Network File Systems diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 8fbfc06a6a2a..0760f4318910 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:04 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:20 2006 # CONFIG_MIPS=y @@ -70,6 +70,8 @@ CONFIG_CASIO_E55=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -88,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -101,18 +103,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -144,11 +148,10 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -162,10 +165,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -177,7 +176,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -185,6 +183,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -219,85 +220,12 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_NET is not set # # Device Drivers @@ -313,7 +241,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m # # Memory Technology Devices (MTD) @@ -335,11 +262,11 @@ CONFIG_CONNECTOR=m # # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -398,81 +325,8 @@ CONFIG_IDE_GENERIC=y # # -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# # ISDN subsystem # -# CONFIG_ISDN is not set # # Telephony Support @@ -508,11 +362,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -531,6 +381,10 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -565,6 +419,7 @@ CONFIG_WATCHDOG=y # # Ftape, the floppy tape device driver # +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -600,10 +455,6 @@ CONFIG_WATCHDOG=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -611,7 +462,6 @@ CONFIG_WATCHDOG=y # # Digital Video Broadcasting Devices # -# CONFIG_DVB is not set # # Graphics support @@ -635,6 +485,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -651,12 +502,30 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -669,13 +538,12 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m @@ -698,10 +566,9 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -722,29 +589,6 @@ CONFIG_RELAYFS_FS=m # CONFIG_UFS_FS is not set # -# Network File Systems -# -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=m -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set @@ -767,44 +611,20 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -814,8 +634,6 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index f2d43be69007..7067f608b22c 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:05 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:02 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_MIPS_EV64120=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_EVB_PCI1 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -116,7 +118,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -138,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +179,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set @@ -191,6 +187,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +208,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -238,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -258,12 +256,15 @@ CONFIG_IP_PNP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -275,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -284,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -309,6 +310,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -352,7 +356,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -550,6 +554,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -559,6 +564,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -617,10 +623,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -651,6 +653,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -668,13 +671,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -719,7 +740,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -783,6 +803,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::" diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index ac5841c4b698..00b56ed0e638 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:06 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:03 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_EV96100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -119,7 +121,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -142,7 +143,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -158,6 +158,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -171,10 +172,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +183,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set @@ -195,6 +191,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -240,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -260,12 +259,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -277,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -286,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -311,6 +313,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -349,7 +354,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -567,10 +572,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -601,6 +602,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -617,12 +619,30 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -667,7 +687,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -731,6 +750,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 42d5cd7927cb..607e2985ffe3 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:51 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:54 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SGI_IP22=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y @@ -121,7 +123,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_IP22_CPU_SCACHE=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -143,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -188,7 +185,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -197,6 +193,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -242,6 +240,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -264,6 +263,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -305,9 +305,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -330,11 +333,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -357,20 +363,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -388,6 +393,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -408,12 +414,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -435,6 +439,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -444,11 +453,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -508,6 +512,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -546,7 +553,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -812,10 +819,6 @@ CONFIG_MAX_RAW_DEVS=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -857,6 +860,7 @@ CONFIG_LOGO_SGI_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,12 +877,30 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -944,7 +966,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -963,7 +984,6 @@ CONFIG_EFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1078,6 +1098,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 8c40590737e1..f724b4b2ecf2 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc4 -# Tue Feb 21 13:44:31 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:04 2006 # CONFIG_MIPS=y @@ -70,6 +70,8 @@ CONFIG_NUMA=y # CONFIG_REPLICATE_KTEXT is not set # CONFIG_REPLICATE_EXHANDLERS is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_IP27=y @@ -123,6 +125,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_NODES_SHIFT=6 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -162,6 +165,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -175,10 +179,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -190,7 +190,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -199,6 +198,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -219,7 +219,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -237,6 +236,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -274,12 +274,15 @@ CONFIG_IP_PNP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -363,6 +366,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -407,7 +413,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -473,7 +479,6 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -491,6 +496,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -654,6 +660,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -727,10 +734,6 @@ CONFIG_SGI_IP27_RTC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -755,6 +758,7 @@ CONFIG_SGI_IP27_RTC=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -772,17 +776,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -840,7 +858,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -922,6 +939,7 @@ CONFIG_SGI_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 7fdcaf51face..8f11d3565b2d 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:09 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:05 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SGI_IP32=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_IP32=y @@ -142,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -159,6 +160,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -172,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -189,6 +187,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -208,7 +207,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -226,6 +224,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -240,6 +239,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -261,12 +261,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -278,6 +281,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -287,11 +295,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -312,6 +315,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -357,7 +363,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -428,7 +434,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -615,6 +620,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -624,6 +630,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -682,10 +689,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -716,6 +719,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -733,13 +737,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -784,7 +806,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -861,6 +882,8 @@ CONFIG_SGI_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index c716996d9eca..757adf23853d 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:10 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:05 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_MIPS_ITE8172=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_IT8172_REVC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,7 +117,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -137,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +154,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -192,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -237,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -258,12 +257,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -275,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -284,11 +291,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -309,6 +311,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -387,7 +392,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -424,7 +428,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -666,10 +670,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -704,7 +704,6 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_OBSOLETE_OSS_DRIVER is not set CONFIG_SOUND_IT8172=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -714,6 +713,7 @@ CONFIG_SOUND_IT8172=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -730,12 +730,30 @@ CONFIG_SOUND_IT8172=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -780,7 +798,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -846,6 +863,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index a8376d125e11..021761a8a237 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:11 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:06 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_IVR=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -112,7 +114,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -134,7 +135,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +151,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +165,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -179,7 +176,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -188,6 +184,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -207,7 +205,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -235,6 +232,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -256,12 +254,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -273,6 +274,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -282,11 +288,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -307,6 +308,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -350,7 +354,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -565,6 +569,7 @@ CONFIG_IT8172_SCR1=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -574,6 +579,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -631,10 +637,6 @@ CONFIG_RTC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -665,6 +667,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -682,13 +685,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -733,7 +754,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -797,6 +817,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 316015379dbc..08f6c30b0abc 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:12 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:06 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_MOMENCO_JAGUAR_ATX=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_JAGUAR_DMALOW=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -122,7 +124,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # # CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y @@ -172,10 +173,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +183,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -195,6 +191,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -214,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -241,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -260,16 +258,19 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set @@ -338,10 +339,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m # @@ -423,6 +423,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y # CONFIG_E100 is not set @@ -446,6 +447,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -514,6 +516,7 @@ CONFIG_MV643XX_ETH_2=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -523,6 +526,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -579,10 +583,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -607,6 +607,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -624,12 +625,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # # @@ -672,7 +690,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems @@ -718,6 +735,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 53fbef1ac25d..38b1e026e10d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:13 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:07 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_TOSHIBA_JMR3927=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -111,7 +113,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,7 +134,6 @@ CONFIG_RTC_DS1742=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -149,6 +149,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -162,10 +163,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -180,6 +177,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -199,7 +198,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -227,6 +225,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -248,12 +247,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -265,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -274,11 +281,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -299,6 +301,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -343,7 +348,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -551,7 +556,12 @@ CONFIG_SERIAL_NONSTANDARD=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y +# CONFIG_SERIAL_TXX9_CONSOLE is not set +# CONFIG_SERIAL_TXX9_STDSERIAL is not set +# CONFIG_SERIAL_JSM is not set # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -610,10 +620,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -631,6 +637,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -642,7 +649,6 @@ CONFIG_FB=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -679,6 +685,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -696,13 +703,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -745,7 +770,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -809,6 +833,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index ef0fa9fc79d6..4d25990a0a05 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:14 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:07 2006 # CONFIG_MIPS=y @@ -68,6 +68,8 @@ CONFIG_PICVUE_PROC=y CONFIG_DS1603=y CONFIG_LASAT_SYSCTL=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -119,7 +121,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_R5000_CPU_SCACHE=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -141,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -157,6 +157,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -170,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +183,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -195,6 +191,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -214,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -242,6 +239,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -259,12 +257,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -276,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -285,11 +291,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -310,6 +311,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -366,7 +370,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -389,7 +392,6 @@ CONFIG_MTD_LASAT=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -430,7 +432,7 @@ CONFIG_MTD_LASAT=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -672,6 +674,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -681,6 +684,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -739,10 +743,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -773,6 +773,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -790,13 +791,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -847,7 +866,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -914,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 367d279efdd9..977f52be51dc 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:15 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:08 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_MALTA=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y @@ -128,16 +130,21 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_VPE_LOADER_TOM=y CONFIG_MIPS_VPE_APSP_API=y +CONFIG_MIPS_APSP_KSPD=y # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_MIPSR2_IRQ_VI is not set +# CONFIG_CPU_MIPSR2_IRQ_EI is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -155,7 +162,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -171,6 +177,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -184,10 +191,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -199,7 +202,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -208,6 +210,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -227,7 +231,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -255,6 +258,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -287,6 +291,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -328,9 +333,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -354,11 +362,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m @@ -382,20 +393,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -413,6 +423,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -433,12 +444,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -484,6 +493,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m @@ -498,11 +512,6 @@ CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -562,6 +571,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -734,7 +746,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -753,6 +764,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -956,6 +968,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -965,6 +978,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1022,10 +1036,6 @@ CONFIG_RTC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -1056,6 +1066,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -1073,13 +1084,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1154,7 +1183,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1174,7 +1202,6 @@ CONFIG_VXFS_FS=m # CONFIG_QNX4FS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1266,6 +1293,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index fe78961762b8..00560e0143f1 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:16 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:09 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_SIM=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,16 +116,19 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_VPE_LOADER_TOM=y CONFIG_MIPS_VPE_APSP_API=y +CONFIG_MIPS_APSP_KSPD=y # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -141,7 +146,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -157,6 +161,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -171,10 +176,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +187,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -195,6 +195,7 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -238,6 +239,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -268,12 +270,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -290,6 +295,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -299,11 +309,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -397,7 +402,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -532,7 +537,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -596,10 +601,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -624,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -640,12 +642,30 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -690,8 +710,6 @@ CONFIG_PROC_FS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set -# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index e4620e7f0a5e..286a018375b2 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:17 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:09 2006 # CONFIG_MIPS=y @@ -72,6 +72,8 @@ CONFIG_VICTOR_MPC30X=y CONFIG_PCI_VR41XX=y CONFIG_VRC4173=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -90,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -103,18 +105,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -179,7 +180,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -187,6 +187,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -206,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -225,6 +227,7 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set +# CONFIG_PCMCIA_VRC4173 is not set # # PCI Hotplug Support @@ -236,6 +239,7 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -245,6 +249,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -264,12 +269,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -281,6 +289,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -290,11 +303,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -316,6 +324,9 @@ CONFIG_IEEE80211=m CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -360,7 +371,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -475,6 +486,7 @@ CONFIG_MII=m # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) @@ -513,6 +525,7 @@ CONFIG_PCMCIA_HERMES=m # # CONFIG_PRISM54 is not set # CONFIG_HOSTAP is not set +# CONFIG_BCM43XX is not set CONFIG_NET_WIRELESS=y # @@ -604,6 +617,8 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +# CONFIG_SERIAL_VR41XX is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -634,6 +649,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # @@ -669,10 +685,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -681,6 +693,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -703,6 +716,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -756,9 +770,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -772,15 +784,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_MDC800 is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -832,13 +835,31 @@ CONFIG_USB_PEGASUS=m # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -883,7 +904,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -946,6 +966,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200" diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index 925d8adef88d..1ce4310fd92a 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:18 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:10 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_3=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -120,7 +122,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -161,6 +161,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -174,10 +175,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -189,7 +186,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -198,6 +194,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -217,7 +215,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -245,6 +242,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -266,6 +264,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -278,9 +277,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y @@ -299,10 +301,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -332,6 +337,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -341,11 +351,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -367,6 +372,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -411,7 +419,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -475,7 +483,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -690,6 +697,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -699,6 +707,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -756,10 +765,6 @@ CONFIG_RTC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -777,6 +782,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -788,7 +794,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -832,6 +837,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -849,13 +855,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -914,7 +938,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1025,6 +1048,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any root=nfs" diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index ee1cf9b9eb9a..8a6aa5012f89 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:19 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:10 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_C=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -139,7 +141,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -155,6 +156,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -168,10 +170,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -185,6 +183,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -204,7 +203,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -222,6 +220,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -236,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -256,12 +256,15 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -273,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -282,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -307,6 +310,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -351,7 +357,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -542,6 +548,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -551,6 +558,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -609,10 +617,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -643,6 +647,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -660,13 +665,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -711,7 +734,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -778,6 +800,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index d80ff278f2af..f9ee35eeb762 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:20 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:11 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -121,7 +123,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -191,6 +188,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -236,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -256,12 +256,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -273,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -282,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -307,6 +310,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -346,7 +352,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -563,10 +569,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -597,6 +599,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -613,12 +616,30 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -663,7 +684,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -730,6 +750,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index c0f508d180c4..b48bdee2411f 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:21 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:11 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_G=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -142,7 +144,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -158,6 +159,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -171,10 +173,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -188,6 +186,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -207,7 +206,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -225,6 +223,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -239,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -259,12 +259,15 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -276,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -285,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -310,6 +313,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -354,7 +360,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -545,6 +551,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -554,6 +561,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -612,10 +620,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -646,6 +650,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -663,13 +668,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -714,7 +737,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -781,6 +803,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 194b3c772bb7..01aac40634b4 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:22 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:12 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_PB1100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -116,11 +118,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -138,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,7 +181,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -192,6 +189,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -247,6 +246,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -269,7 +269,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -280,6 +281,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -296,10 +299,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -323,6 +329,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -332,11 +343,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -358,6 +364,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -414,7 +423,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -436,7 +444,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -473,7 +480,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -716,10 +723,6 @@ CONFIG_SYNCLINK_CS=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -750,6 +753,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # @@ -767,12 +771,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -830,7 +852,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -939,6 +960,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 8985725e6a98..398c3c265b9f 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:24 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:13 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_PB1500=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -253,6 +251,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -364,6 +369,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -485,7 +491,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -750,6 +756,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -761,6 +768,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -826,10 +834,6 @@ CONFIG_SYNCLINK_CS=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -854,6 +858,7 @@ CONFIG_SYNCLINK_CS=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -871,13 +876,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -935,7 +958,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1044,6 +1066,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index adbf997b540e..ea282a53bb66 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:25 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:13 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_PB1550=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -253,6 +251,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -364,6 +369,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -485,7 +491,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -742,6 +748,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -753,6 +760,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -818,10 +826,6 @@ CONFIG_SYNCLINK_CS=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -846,6 +850,7 @@ CONFIG_SYNCLINK_CS=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -863,13 +868,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -927,7 +950,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1036,6 +1058,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index b5db700450ba..4c57e564db0b 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:26 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:14 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_PNX8550_JBS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +179,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -190,6 +187,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -209,7 +208,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_DEBUG is not set CONFIG_MMU=y @@ -238,6 +236,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -257,12 +256,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -274,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -283,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -469,7 +471,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -671,6 +672,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_IP3106 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -723,6 +725,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -730,10 +733,6 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -742,6 +741,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -764,6 +764,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -827,9 +828,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -844,15 +843,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -902,13 +892,31 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -956,7 +964,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1067,6 +1074,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 4187287f0763..3c8f35162fec 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:28 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:14 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_PNX8550_V2PCI=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,12 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_ADVANCED=y CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_WB is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +154,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +178,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -190,6 +186,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -209,7 +207,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -237,6 +234,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -256,6 +254,7 @@ CONFIG_IP_PNP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -268,9 +267,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y @@ -287,10 +289,12 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -320,6 +324,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -329,11 +338,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -521,7 +525,6 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -757,6 +760,7 @@ CONFIG_SERIAL_NONSTANDARD=y # Non-8250 serial port support # # CONFIG_SERIAL_IP3106 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -816,7 +820,6 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -835,9 +838,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -867,6 +868,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -901,10 +903,6 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -913,6 +911,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -922,6 +921,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -933,7 +933,6 @@ CONFIG_FB=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -970,6 +969,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1030,9 +1030,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1047,15 +1045,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1106,13 +1095,31 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1171,7 +1178,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1280,6 +1286,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 31f5afabafa8..4bcc01dea041 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Sun Feb 12 19:18:55 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:15 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_QEMU=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_GENERIC_ISA_DMA=y @@ -115,16 +117,17 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -147,6 +150,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y @@ -159,10 +163,6 @@ CONFIG_ELF_CORE=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SHMEM is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 @@ -177,6 +177,8 @@ CONFIG_BASE_SMALL=1 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -196,6 +198,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ISA=y CONFIG_MMU=y +CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support @@ -241,12 +244,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -308,7 +314,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -530,10 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -552,6 +554,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y @@ -565,6 +568,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -581,15 +585,28 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # # @@ -632,7 +649,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # # Miscellaneous filesystems @@ -680,6 +696,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index b126f763cf51..3d441932e43a 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:30 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:16 2006 # CONFIG_MIPS=y @@ -71,6 +71,8 @@ CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -121,10 +123,9 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set -CONFIG_CPU_ADVANCED=y CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_WB=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -145,7 +146,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -162,6 +162,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -175,10 +176,6 @@ CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -190,7 +187,6 @@ CONFIG_OBSOLETE_INTERMODULE=y # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -199,6 +195,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -218,7 +216,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_ISA=y CONFIG_MMU=y @@ -247,6 +244,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -267,6 +265,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -279,9 +278,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y @@ -300,10 +302,12 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -333,6 +337,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -342,11 +351,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -369,6 +373,9 @@ CONFIG_IEEE80211=m CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -425,7 +432,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -447,7 +453,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -702,6 +707,7 @@ CONFIG_NET_PCI=y # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) @@ -715,6 +721,8 @@ CONFIG_NET_RADIO=y # # CONFIG_IPW2100 is not set CONFIG_IPW2200=m +# CONFIG_IPW2200_MONITOR is not set +# CONFIG_IPW_QOS is not set # CONFIG_IPW2200_DEBUG is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set @@ -724,6 +732,7 @@ CONFIG_IPW2200=m # # CONFIG_PRISM54 is not set # CONFIG_HOSTAP is not set +# CONFIG_BCM43XX is not set CONFIG_NET_WIRELESS=y # @@ -821,7 +830,12 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y +# CONFIG_SERIAL_TXX9_CONSOLE is not set +# CONFIG_SERIAL_TXX9_STDSERIAL is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -874,6 +888,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -881,10 +896,6 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -893,6 +904,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -902,6 +914,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -913,7 +926,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=y @@ -934,6 +946,7 @@ CONFIG_FB_ATY_CT=y # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set @@ -954,6 +967,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1003,9 +1017,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set CONFIG_USB_YEALINK=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1019,15 +1031,6 @@ CONFIG_USB_YEALINK=m # CONFIG_USB_MDC800 is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1078,13 +1081,31 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1148,7 +1169,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1266,6 +1286,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 463ed3dbf6ae..edfb9679a25a 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:31 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:16 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SNI_RM200_PCI=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y @@ -122,7 +124,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -145,7 +146,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -163,6 +163,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -176,10 +177,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -191,7 +188,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -200,6 +196,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -220,10 +218,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_EISA=y CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_ISA=y # CONFIG_EISA is not set CONFIG_MMU=y +CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support @@ -250,6 +248,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -272,6 +271,7 @@ CONFIG_IP_PIMSM_V2=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -284,9 +284,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -309,11 +312,14 @@ CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m @@ -337,20 +343,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -368,6 +373,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -388,12 +394,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -439,21 +443,22 @@ CONFIG_BRIDGE_EBT_ULOG=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set +CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -533,6 +538,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -620,6 +628,7 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -700,12 +709,11 @@ CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -731,6 +739,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m +CONFIG_MD_RAID5_RESHAPE=y # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -965,6 +974,7 @@ CONFIG_HW_CONSOLE=y # Serial drivers # CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -977,6 +987,7 @@ CONFIG_SERIAL_8250_RSA=y # Non-8250 serial port support # CONFIG_SERIAL_CORE=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1027,12 +1038,19 @@ CONFIG_RTC=m # Dallas's 1-wire bus # CONFIG_W1=m -CONFIG_W1_MATROX=m -CONFIG_W1_DS9490=m -# CONFIG_W1_DS9490_BRIDGE is not set -CONFIG_W1_THERM=m -CONFIG_W1_SMEM=m -# CONFIG_W1_DS2433 is not set + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_MATROX is not set +# CONFIG_W1_MASTER_DS9490 is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set # # Hardware Monitoring support @@ -1045,10 +1063,6 @@ CONFIG_W1_SMEM=m # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -1057,6 +1071,7 @@ CONFIG_W1_SMEM=m # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +CONFIG_USB_DABUSB=m # # Graphics support @@ -1067,6 +1082,7 @@ CONFIG_W1_SMEM=m # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y @@ -1080,6 +1096,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -1151,9 +1168,7 @@ CONFIG_USB_WACOM=m # CONFIG_USB_ACECAD is not set CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -CONFIG_USB_EGALAX=m +# CONFIG_USB_TOUCHSCREEN is not set CONFIG_USB_YEALINK=m CONFIG_USB_XPAD=m # CONFIG_USB_ATI_REMOTE is not set @@ -1168,15 +1183,6 @@ CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # -# USB Multimedia devices -# -CONFIG_USB_DABUSB=m - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # CONFIG_USB_CATC=m @@ -1213,6 +1219,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1237,6 +1244,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m @@ -1281,13 +1289,31 @@ CONFIG_USB_TEST=m # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1358,7 +1384,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1379,7 +1404,6 @@ CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1500,6 +1524,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index da68c3f72050..e388a3dae0a9 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:32 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:17 2006 # CONFIG_MIPS=y @@ -81,6 +81,8 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_SB1250_PROF is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -158,7 +160,6 @@ CONFIG_PREEMPT_BKL=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -175,6 +176,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -188,10 +190,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -203,7 +201,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -212,6 +209,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -231,7 +229,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -249,6 +246,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -263,6 +261,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -284,12 +283,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -301,6 +303,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -310,11 +317,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -335,6 +337,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -589,6 +594,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -647,10 +653,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -675,6 +677,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -692,13 +695,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -746,7 +767,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -812,6 +832,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_SB1XXX_CORELIS is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 9a936d7b7c0c..6b8a6a416a25 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:33 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:17 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_SEAD=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -118,11 +120,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -140,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -185,6 +183,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -296,12 +296,6 @@ CONFIG_RAID_ATTRS=y # # -# Network device support -# -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# # ISDN subsystem # @@ -397,10 +391,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -424,6 +414,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -440,12 +431,30 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -489,7 +498,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -543,6 +551,8 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index c2dee0d1c72c..dba0bdcdcf29 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:34 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:41 2006 # CONFIG_MIPS=y @@ -68,12 +68,14 @@ CONFIG_MACH_VR41XX=y # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y CONFIG_TANBAC_TB0226=y -CONFIG_TANBAC_TB0287=y +# CONFIG_TANBAC_TB0287 is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -92,7 +94,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -105,18 +107,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -137,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +157,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +182,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -189,6 +189,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -208,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -226,6 +228,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -235,11 +238,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -263,12 +265,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -280,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -289,11 +299,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -310,10 +315,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -358,11 +360,12 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -397,14 +400,14 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -CONFIG_ISCSI_TCP=m +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -424,7 +427,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -507,8 +509,8 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -625,6 +627,11 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -685,10 +692,6 @@ CONFIG_GPIO_VR41XX=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -697,6 +700,7 @@ CONFIG_GPIO_VR41XX=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -719,6 +723,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -756,7 +761,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set @@ -783,9 +788,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -800,15 +803,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -816,7 +810,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers @@ -860,13 +854,48 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers # +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_VR41XX=y +# CONFIG_RTC_DRV_TEST is not set # # File systems @@ -911,7 +940,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -952,9 +980,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp932" +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -970,46 +996,7 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=m -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +# CONFIG_NLS is not set # # Profiling support @@ -1023,44 +1010,20 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -1069,9 +1032,8 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index be99261d7997..5a924c1a5803 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:35 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:59 2006 # CONFIG_MIPS=y @@ -68,12 +68,14 @@ CONFIG_MACH_VR41XX=y # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y # CONFIG_TANBAC_TB0226 is not set -CONFIG_TANBAC_TB0287=y +# CONFIG_TANBAC_TB0287 is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -92,7 +94,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -105,18 +107,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -137,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +157,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +182,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -189,6 +189,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -208,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -226,6 +228,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -235,11 +238,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -264,12 +266,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -281,6 +286,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -290,11 +300,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -311,10 +316,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -325,12 +327,12 @@ CONFIG_IEEE80211_CRYPT_CCMP=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +# CONFIG_FW_LOADER is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -363,10 +365,8 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -443,30 +443,7 @@ CONFIG_MII=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -483,7 +460,6 @@ CONFIG_R8169=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -510,19 +486,8 @@ CONFIG_R8169=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_PPP is not set +# CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -583,6 +548,11 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -607,6 +577,7 @@ CONFIG_TANBAC_TB0219=y # Ftape, the floppy tape device driver # # CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -642,10 +613,6 @@ CONFIG_TANBAC_TB0219=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -654,6 +621,7 @@ CONFIG_TANBAC_TB0219=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -676,6 +644,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -731,9 +700,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -747,15 +714,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_MDC800 is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -807,13 +765,48 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers # +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_VR41XX=y +# CONFIG_RTC_DRV_TEST is not set # # File systems @@ -821,32 +814,16 @@ CONFIG_USB_MON=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set +# CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y # CONFIG_QUOTA is not set -CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y @@ -855,20 +832,14 @@ CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -880,7 +851,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -921,9 +891,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp932" +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -939,46 +907,7 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=m -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +# CONFIG_NLS is not set # # Profiling support @@ -992,44 +921,20 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -1038,9 +943,8 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig new file mode 100644 index 000000000000..9f215ea350dc --- /dev/null +++ b/arch/mips/configs/tb0287_defconfig @@ -0,0 +1,1132 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:09:17 2006 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +CONFIG_MACH_VR41XX=y +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set +CONFIG_TANBAC_TB022X=y +# CONFIG_TANBAC_TB0226 is not set +CONFIG_TANBAC_TB0287=y +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +CONFIG_PCI_VR41XX=y +# CONFIG_VRC4173 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +CONFIG_CPU_VR41XX=y +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_MIPS_MT is not set +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# + +# +# Texas Instruments PCILynx requires I2C +# +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=m + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_TANBAC_TB0219 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +CONFIG_FB_SMIVGX=y +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +# CONFIG_XFS_SECURITY is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_QUOTACTL=y +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 7132e296d40a..ac7765eb8da7 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:36 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:09:33 2006 # CONFIG_MIPS=y @@ -70,6 +70,8 @@ CONFIG_IBM_WORKPAD=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -88,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -101,18 +103,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -149,6 +153,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -162,10 +167,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -177,7 +178,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -185,6 +185,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -220,6 +223,7 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y +CONFIG_PCMCIA_VRC4171=y # # PCI Hotplug Support @@ -230,6 +234,7 @@ CONFIG_PCMCIA_PROBE=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -239,6 +244,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -258,12 +264,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -275,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -284,11 +298,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -305,10 +314,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -347,10 +354,12 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -468,7 +477,38 @@ CONFIG_MII=m # # Wireless LAN (non-hamradio) # -# CONFIG_NET_RADIO is not set +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # PCMCIA network device support @@ -512,10 +552,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -533,11 +570,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -556,6 +589,10 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -568,20 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# ISA-based Watchdog Cards -# -# CONFIG_PCWATCHDOG is not set -# CONFIG_MIXCOMWD is not set -# CONFIG_WDT is not set +# CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set @@ -597,6 +621,7 @@ CONFIG_WATCHDOG=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # @@ -632,10 +657,6 @@ CONFIG_WATCHDOG=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -667,6 +688,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -683,12 +705,30 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -710,7 +750,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m @@ -733,10 +773,9 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -802,44 +841,20 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -849,8 +864,6 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_LIBCRC32C is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 67457850941d..b52d709de962 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:37 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:20 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_PMC_YOSEMITE=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_HYPERTRANSPORT is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -116,7 +118,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -140,7 +141,6 @@ CONFIG_PREEMPT_BKL=y # Code maturity level options # # CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -157,6 +157,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y @@ -170,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -184,7 +181,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -194,6 +190,8 @@ CONFIG_STOP_MACHINE=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -213,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set CONFIG_MMU=y @@ -241,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -261,16 +259,19 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set @@ -340,10 +341,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m # @@ -433,6 +433,7 @@ CONFIG_MII=y # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -497,6 +498,7 @@ CONFIG_TITAN_GE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -506,6 +508,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -563,10 +566,6 @@ CONFIG_GEN_RTC_X=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -591,6 +590,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -608,12 +608,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # # @@ -656,7 +673,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile index 488206b8d94e..304c02107b46 100644 --- a/arch/mips/ddb5xxx/ddb5074/Makefile +++ b/arch/mips/ddb5xxx/ddb5074/Makefile @@ -3,6 +3,6 @@ # under Linux. # -obj-y += setup.o irq.o int-handler.o nile4_pic.o +obj-y += setup.o irq.o nile4_pic.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5074/int-handler.S b/arch/mips/ddb5xxx/ddb5074/int-handler.S deleted file mode 100644 index a78644150b37..000000000000 --- a/arch/mips/ddb5xxx/ddb5074/int-handler.S +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler - * - * Based on arch/mips/sgi/kernel/indyIRQ.S - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the INDY look basically (barring software IRQs - * which we don't use at all) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Local IRQ level zero - * 3 Local IRQ level one - * 4 8254 Timer zero - * 5 8254 Timer one - * 6 Bus Error - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Local IRQ zero - * Local IRQ one - * Bus Error - * 8254 Timer zero - * Lowest ---- 8254 Timer one - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(ddbIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 s0, CP0_CAUSE # get irq mask - -#if 1 - mfc0 t2,CP0_STATUS # get enabled interrupts - and s0,t2 # isolate allowed ones -#endif - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check local level one - - /* Wheee, local level zero interrupt. */ - jal ddb_local0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP6 # delay slot, check bus error - - /* Wheee, local level one interrupt. */ - move a0, sp - jal ddb_local1_irqdispatch - nop - - j ret_from_irq - nop - -1: - beq a0, zero, 1f - nop - - /* Wheee, an asynchronous bus error... */ - move a0, sp - jal ddb_buserror_irq - nop - - j ret_from_irq - nop - -1: - /* Here by mistake? This is possible, what can happen - * is that by the time we take the exception the IRQ - * pin goes low, so just leave if this is the case. - */ - andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) - beq a0, zero, 1f - - /* Must be one of the 8254 timers... */ - move a0, sp - jal ddb_8254timer_irq - nop -1: - j ret_from_irq - nop - END(ddbIRQ) diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c index 45088a1be414..60c087b7738c 100644 --- a/arch/mips/ddb5xxx/ddb5074/irq.c +++ b/arch/mips/ddb5xxx/ddb5074/irq.c @@ -21,8 +21,6 @@ #include <asm/ddb5xxx/ddb5074.h> -extern asmlinkage void ddbIRQ(void); - static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; #define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ @@ -90,7 +88,7 @@ static void m1543_irq_setup(void) } -void ddb_local0_irqdispatch(struct pt_regs *regs) +static void ddb_local0_irqdispatch(struct pt_regs *regs) { u32 mask; int nile4_irq; @@ -118,29 +116,41 @@ void ddb_local0_irqdispatch(struct pt_regs *regs) } } -void ddb_local1_irqdispatch(void) +static void ddb_local1_irqdispatch(void) { printk("ddb_local1_irqdispatch called\n"); } -void ddb_buserror_irq(void) +static void ddb_buserror_irq(void) { printk("ddb_buserror_irq called\n"); } -void ddb_8254timer_irq(void) +static void ddb_8254timer_irq(void) { printk("ddb_8254timer_irq called\n"); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & CAUSEF_IP2) + ddb_local0_irqdispatch(regs); + else if (pending & CAUSEF_IP3) + ddb_local1_irqdispatch(); + else if (pending & CAUSEF_IP6) + ddb_buserror_irq(); + else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) + ddb_8254timer_irq(); +} + void __init arch_init_irq(void) { /* setup cascade interrupts */ setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); - set_except_vector(0, ddbIRQ); - nile4_irq_setup(NILE4_IRQ_BASE); m1543_irq_setup(); init_i8259_irqs(); diff --git a/arch/mips/ddb5xxx/ddb5476/Makefile b/arch/mips/ddb5xxx/ddb5476/Makefile index 61eec363cb02..ab0312cb47b4 100644 --- a/arch/mips/ddb5xxx/ddb5476/Makefile +++ b/arch/mips/ddb5xxx/ddb5476/Makefile @@ -3,7 +3,7 @@ # under Linux. # -obj-y += setup.o irq.o int-handler.o nile4_pic.o vrc5476_irq.o +obj-y += setup.o irq.o nile4_pic.o vrc5476_irq.o obj-$(CONFIG_KGDB) += dbg_io.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c index 85e9e5013679..f2296a999953 100644 --- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c +++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c @@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/ddb5xxx/ddb5476/int-handler.S b/arch/mips/ddb5xxx/ddb5476/int-handler.S deleted file mode 100644 index 12c292e189ba..000000000000 --- a/arch/mips/ddb5xxx/ddb5476/int-handler.S +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ddb5476 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -#include <asm/ddb5xxx/ddb5476.h> - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ddb5476_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - .set noreorder - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cpu_ip7 - andi t1, t0, STATUSF_IP2 /* vrc5476 & i8259 */ - bnez t1, ll_cpu_ip2 - andi t1, t0, STATUSF_IP3 - bnez t1, ll_cpu_ip3 - andi t1, t0, STATUSF_IP4 - bnez t1, ll_cpu_ip4 - andi t1, t0, STATUSF_IP5 - bnez t1, ll_cpu_ip5 - andi t1, t0, STATUSF_IP6 - bnez t1, ll_cpu_ip6 - andi t1, t0, STATUSF_IP0 /* software int 0 */ - bnez t1, ll_cpu_ip0 - andi t1, t0, STATUSF_IP1 /* software int 1 */ - bnez t1, ll_cpu_ip1 - nop - - .set reorder - - /* wrong alarm or masked ... */ - // j spurious_interrupt - move a0, sp - jal vrc5476_irq_dispatch - j ret_from_irq - nop - - .align 5 - -ll_cpu_ip0: - li a0, CPU_IRQ_BASE + 0 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip1: - li a0, CPU_IRQ_BASE + 1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip2: /* jump to second-level dispatching */ - move a0, sp - jal vrc5476_irq_dispatch - j ret_from_irq - -ll_cpu_ip3: - li a0, CPU_IRQ_BASE + 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip4: - li a0, CPU_IRQ_BASE + 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip5: - li a0, CPU_IRQ_BASE + 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip6: - li a0, CPU_IRQ_BASE + 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip7: - li a0, CPU_IRQ_BASE + 7 - move a1, sp - jal do_IRQ - j ret_from_irq - - END(ddb5476_handle_int) diff --git a/arch/mips/ddb5xxx/ddb5476/irq.c b/arch/mips/ddb5xxx/ddb5476/irq.c index 5388b5868c4a..7583a1f30711 100644 --- a/arch/mips/ddb5xxx/ddb5476/irq.c +++ b/arch/mips/ddb5xxx/ddb5476/irq.c @@ -110,11 +110,36 @@ static void nile4_irq_setup(void) static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL }; -extern asmlinkage void ddb5476_handle_int(void); extern int setup_irq(unsigned int irq, struct irqaction *irqaction); extern void mips_cpu_irq_init(u32 irq_base); extern void vrc5476_irq_init(u32 irq_base); +extern void vrc5476_irq_dispatch(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7, regs); + else if (pending & STATUSF_IP2) + vrc5476_irq_dispatch(regs); + else if (pending & STATUSF_IP3) + do_IRQ(CPU_IRQ_BASE + 3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(CPU_IRQ_BASE + 4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(CPU_IRQ_BASE + 5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(CPU_IRQ_BASE + 6, regs); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE, regs); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1, regs); + + vrc5476_irq_dispatch(regs); +} + void __init arch_init_irq(void) { /* hardware initialization */ @@ -137,7 +162,4 @@ void __init arch_init_irq(void) setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error); setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error); setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error); - - /* setup the grandpa intr vector */ - set_except_vector(0, ddb5476_handle_int); } diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c index f66fe5b58636..a3c5e7b18018 100644 --- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c +++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c @@ -77,11 +77,9 @@ vrc5476_irq_init(u32 base) } -asmlinkage void +void vrc5476_irq_dispatch(struct pt_regs *regs) { - extern void spurious_interrupt(void); - u32 mask; int nile4_irq; @@ -107,5 +105,5 @@ vrc5476_irq_dispatch(struct pt_regs *regs) return; } } - spurious_interrupt(); + spurious_interrupt(regs); } diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile index b79b43c9f93b..ea68815ad17a 100644 --- a/arch/mips/ddb5xxx/ddb5477/Makefile +++ b/arch/mips/ddb5xxx/ddb5477/Makefile @@ -2,7 +2,7 @@ # Makefile for NEC DDB-Vrc5477 board # -obj-y += int-handler.o irq.o irq_5477.o setup.o lcd44780.o +obj-y += irq.o irq_5477.o setup.o lcd44780.o obj-$(CONFIG_RUNTIME_DEBUG) += debug.o obj-$(CONFIG_KGDB) += kgdb_io.o diff --git a/arch/mips/ddb5xxx/ddb5477/int-handler.S b/arch/mips/ddb5xxx/ddb5477/int-handler.S deleted file mode 100644 index a2502a14400e..000000000000 --- a/arch/mips/ddb5xxx/ddb5477/int-handler.S +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ddb5477 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/ddb5xxx/ddb5477.h> - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ddb5477_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - .set noreorder - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - andi t1, t0, (STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 ) - bnez t1, ll_vrc5477_irq - andi t1, t0, STATUSF_IP0 /* software int 0 */ - bnez t1, ll_cpu_ip0 - andi t1, t0, STATUSF_IP1 /* software int 1 */ - bnez t1, ll_cpu_ip1 - nop - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ddb5477_handle_int) - - .align 5 - -ll_vrc5477_irq: - move a0, sp - jal vrc5477_irq_dispatch - j ret_from_irq - -ll_cputimer_irq: - li a0, CPU_IRQ_BASE + 7 - move a1, sp - jal do_IRQ - j ret_from_irq - - -ll_cpu_ip0: - li a0, CPU_IRQ_BASE + 0 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip1: - li a0, CPU_IRQ_BASE + 1 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c index 9ffe1a9142ca..de433cf9fb50 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq.c +++ b/arch/mips/ddb5xxx/ddb5477/irq.c @@ -75,7 +75,6 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger) extern void vrc5477_irq_init(u32 base); extern void mips_cpu_irq_init(u32 base); -extern asmlinkage void ddb5477_handle_int(void); extern int setup_irq(unsigned int irq, struct irqaction *irqaction); static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; @@ -135,9 +134,6 @@ void __init arch_init_irq(void) /* setup cascade interrupts */ setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade); setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade); - - /* hook up the first-level interrupt handler */ - set_except_vector(0, ddb5477_handle_int); } u8 i8259_interrupt_ack(void) @@ -159,7 +155,7 @@ u8 i8259_interrupt_ack(void) * the first level int-handler will jump here if it is a vrc5477 irq */ #define NUM_5477_IRQS 32 -asmlinkage void +static void vrc5477_irq_dispatch(struct pt_regs *regs) { u32 intStatus; @@ -197,3 +193,21 @@ vrc5477_irq_dispatch(struct pt_regs *regs) } } } + +#define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6) + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7, regs); + else if (pending & VR5477INTS) + vrc5477_irq_dispatch(regs); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE, regs); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1, regs); + else + spurious_interrupt(regs); +} diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c index 1d18d590495b..385bbdb10170 100644 --- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c +++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c @@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/dec/boot/decstation.c b/arch/mips/dec/boot/decstation.c index 56fd4277555e..4db8bacaf22d 100644 --- a/arch/mips/dec/boot/decstation.c +++ b/arch/mips/dec/boot/decstation.c @@ -1,6 +1,7 @@ /* * arch/mips/dec/decstation.c */ +#include <asm/sections.h> #define RELOC #define INITRD @@ -24,7 +25,7 @@ #define INITRD_START (*(unsigned long *) (PARAM+0x218)) #define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) -extern int _ftext, _end; /* begin and end of kernel image */ +extern int _ftext; /* begin and end of kernel image */ extern void kernel_entry(int, char **, unsigned long, int *); void * memcpy(void * dest, const void *src, unsigned int count) diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 41fa372007bf..e8ec93e33fe6 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -36,7 +36,7 @@ .text .set noreorder /* - * decstation_handle_int: Interrupt handler for DECstations + * plat_irq_dispatch: Interrupt handler for DECstations * * We follow the model in the Indy interrupt code by David Miller, where he * says: a lot of complication here is taken away because: @@ -125,11 +125,7 @@ * just take another exception, big deal. */ .align 5 - NESTED(decstation_handle_int, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI # TEST: interrupts should be off - .set at + NESTED(plat_irq_dispatch, PT_SIZE, ra) .set noreorder /* @@ -282,9 +278,11 @@ fpu: #endif spurious: - j spurious_interrupt + jal spurious_interrupt nop - END(decstation_handle_int) + j ret_from_irq + nop + END(plat_irq_dispatch) /* * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 7c1ca8f6330e..ad5d436d80c1 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -48,8 +48,6 @@ extern void dec_machine_halt(void); extern void dec_machine_power_off(void); extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs); -extern asmlinkage void decstation_handle_int(void); - unsigned long dec_kn_slot_base, dec_kn_slot_size; EXPORT_SYMBOL(dec_kn_slot_base); @@ -744,7 +742,6 @@ void __init arch_init_irq(void) panic("Don't know how to set this up!"); break; } - set_except_vector(0, decstation_handle_int); /* Free the FPU interrupt if the exception is present. */ if (!cpu_has_nofpuex) { diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 42d5cd7927cb..607e2985ffe3 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:51 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:54 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SGI_IP22=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y @@ -121,7 +123,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_IP22_CPU_SCACHE=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -143,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -188,7 +185,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -197,6 +193,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -242,6 +240,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -264,6 +263,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -305,9 +305,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -330,11 +333,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -357,20 +363,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -388,6 +393,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -408,12 +414,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -435,6 +439,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -444,11 +453,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -508,6 +512,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -546,7 +553,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -812,10 +819,6 @@ CONFIG_MAX_RAW_DEVS=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -857,6 +860,7 @@ CONFIG_LOGO_SGI_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,12 +877,30 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -944,7 +966,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -963,7 +984,6 @@ CONFIG_EFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1078,6 +1098,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/galileo-boards/ev96100/Makefile b/arch/mips/galileo-boards/ev96100/Makefile index 58c02f9db69d..cd868ec78cbc 100644 --- a/arch/mips/galileo-boards/ev96100/Makefile +++ b/arch/mips/galileo-boards/ev96100/Makefile @@ -6,4 +6,4 @@ # Makefile for the Galileo EV96100 board. # -obj-y += init.o irq.o puts.o reset.o time.o int-handler.o setup.o +obj-y += init.o irq.o puts.o reset.o time.o setup.o diff --git a/arch/mips/galileo-boards/ev96100/int-handler.S b/arch/mips/galileo-boards/ev96100/int-handler.S deleted file mode 100644 index ff4d10a38859..000000000000 --- a/arch/mips/galileo-boards/ev96100/int-handler.S +++ /dev/null @@ -1,33 +0,0 @@ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .set noat - .align 5 - -NESTED(ev96100IRQ, PT_SIZE, sp) - SAVE_ALL - CLI # Important: mark KERNEL mode ! - - mfc0 t0, CP0_CAUSE # get pending interrupts - mfc0 t1, CP0_STATUS # get enabled interrupts - and t0, t1 # isolate allowed ones - - # FIX ME add R7000 extensions - andi t0,0xff00 # isolate pending bits - andi a0, t0, CAUSEF_IP7 - beq a0, zero, 1f - move a0, sp - jal mips_timer_interrupt - j ret_from_irq - -1: beqz t0, 3f # spurious interrupt - - move a0, t0 - move a1, sp - jal ev96100_cpu_irq - j ret_from_irq - -3: j spurious_interrupt - END(ev96100IRQ) diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c index 97bf094da4fe..ee5d6720f23b 100644 --- a/arch/mips/galileo-boards/ev96100/irq.c +++ b/arch/mips/galileo-boards/ev96100/irq.c @@ -40,8 +40,6 @@ #include <linux/interrupt.h> #include <asm/irq_cpu.h> -extern asmlinkage void ev96100IRQ(void); - static inline unsigned int ffz8(unsigned int word) { unsigned long k; @@ -54,13 +52,26 @@ static inline unsigned int ffz8(unsigned int word) return k; } -asmlinkage void ev96100_cpu_irq(unsigned int pendin) +extern void mips_timer_interrupt(struct pt_regs *regs); + +asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs) { do_IRQ(ffz8(pending >> 8), regs); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) + mips_timer_interrupt(regs); + else if (pending) + ev96100_cpu_irq(pending, regs); + else + spurious_interrupt(regs); +} + void __init arch_init_irq(void) { - set_except_vector(0, ev96100IRQ); mips_cpu_irq_init(0); } diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile index ebe91c57e173..b2c53a8f8718 100644 --- a/arch/mips/gt64120/ev64120/Makefile +++ b/arch/mips/gt64120/ev64120/Makefile @@ -6,6 +6,6 @@ # Makefile for the Galileo EV64120 board. # -obj-y += int-handler.o irq.o promcon.o reset.o serialGT.o setup.o +obj-y += irq.o promcon.o reset.o serialGT.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/gt64120/ev64120/int-handler.S b/arch/mips/gt64120/ev64120/int-handler.S deleted file mode 100644 index 752435faf2de..000000000000 --- a/arch/mips/gt64120/ev64120/int-handler.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * int-handler.S - * - * Based on the cobalt handler. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * galileo_handle_int - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - .set reorder - .set noat - NESTED(galileo_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0,CP0_CAUSE - mfc0 t2,CP0_STATUS - - and t0,t2 - - andi t1,t0,STATUSF_IP4 /* int2 hardware line (timer) */ - bnez t1,ll_gt64120_irq - andi t1,t0,STATUSF_IP2 /* int0 hardware line */ - bnez t1,ll_pci_intA - andi t1,t0,STATUSF_IP5 /* int3 hardware line */ - bnez t1,ll_pci_intD - andi t1,t0,STATUSF_IP6 /* int4 hardware line */ - bnez t1,ll_serial_irq - andi t1,t0,STATUSF_IP7 /* compare int */ - bnez t1,ll_compare_irq - nop - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(galileo_handle_int) - - - .align 5 - .set reorder -ll_gt64120_irq: - li a0,4 - move a1,sp - jal do_IRQ - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_compare_irq: - li a0,7 - move a1,sp - jal do_IRQ - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_pci_intA: - move a0,sp - jal pci_intA - nop - j ret_from_irq - nop - -#if 0 - .align 5 - .set reorder -ll_pci_intB: - move a0,sp - jal pci_intB - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_pci_intC: - move a0,sp - jal pci_intC - nop - j ret_from_irq - nop -#endif - - .align 5 - .set reorder -ll_pci_intD: - move a0,sp - jal pci_intD - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_serial_irq: - li a0,6 - move a1,sp - jal do_IRQ - nop - j ret_from_irq - nop diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c index 3b186159b21a..46c468b26b30 100644 --- a/arch/mips/gt64120/ev64120/irq.c +++ b/arch/mips/gt64120/ev64120/irq.c @@ -46,14 +46,22 @@ #include <asm/system.h> #include <asm/gt64120.h> -asmlinkage inline void pci_intA(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { - do_IRQ(GT_INTA, regs); -} - -asmlinkage inline void pci_intD(struct pt_regs *regs) -{ - do_IRQ(GT_INTD, regs); + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP4) /* int2 hardware line (timer) */ + do_IRQ(4, regs); + else if (pending & STATUSF_IP2) /* int0 hardware line */ + do_IRQ(GT_INTA, regs); + else if (pending & STATUSF_IP5) /* int3 hardware line */ + do_IRQ(GT_INTD, regs); + else if (pending & STATUSF_IP6) /* int4 hardware line */ + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) /* compare int */ + do_IRQ(7, regs); + else + spurious_interrupt(regs); } static void disable_ev64120_irq(unsigned int irq_nr) @@ -109,16 +117,11 @@ static struct hw_interrupt_type ev64120_irq_type = { void gt64120_irq_setup(void) { - extern asmlinkage void galileo_handle_int(void); - /* * Clear all of the interrupts while we change the able around a bit. */ clear_c0_status(ST0_IM); - /* Sets the exception_handler array. */ - set_except_vector(0, galileo_handle_int); - local_irq_disable(); /* diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c index 16e34a546e54..8f0d835491ff 100644 --- a/arch/mips/gt64120/ev64120/serialGT.c +++ b/arch/mips/gt64120/ev64120/serialGT.c @@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud) #else /* * Note: Set baud rate, hardcoded here for rate of 115200 - * since became unsure of above "buad rate" algorithm (??). + * since became unsure of above "baud rate" algorithm (??). */ outreg(channel, LCR, 0x83); outreg(channel, DLM, 0x00); // See note above diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile index 7b59c6567c79..6f708df8373b 100644 --- a/arch/mips/gt64120/momenco_ocelot/Makefile +++ b/arch/mips/gt64120/momenco_ocelot/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum's Ocelot board. # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c index 8720bccfdea2..f0a6a38fcf4d 100644 --- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c +++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/gt64120/momenco_ocelot/int-handler.S b/arch/mips/gt64120/momenco_ocelot/int-handler.S deleted file mode 100644 index 808acef248cc..000000000000 --- a/arch/mips/gt64120/momenco_ocelot/int-handler.S +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ocelot board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pri_enet_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_sec_enet_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_uart1_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_galileo_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - /* now look at the extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_pmc1_irq - andi t1, t0, STATUSF_IP9 /* int7 hardware line */ - bnez t1, ll_pmc2_irq - andi t1, t0, STATUSF_IP10 /* int8 hardware line */ - bnez t1, ll_cpci_abcd_irq - andi t1, t0, STATUSF_IP11 /* int9 hardware line */ - bnez t1, ll_uart2_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot_handle_int) - - .align 5 -ll_pri_enet_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_sec_enet_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart1_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc1_irq: - li a0, 8 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc2_irq: - li a0, 9 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_abcd_irq: - li a0, 10 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart2_irq: - li a0, 11 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c index 4f108da71b23..885f67f32ea3 100644 --- a/arch/mips/gt64120/momenco_ocelot/irq.c +++ b/arch/mips/gt64120/momenco_ocelot/irq.c @@ -48,7 +48,38 @@ #include <asm/mipsregs.h> #include <asm/system.h> -extern asmlinkage void ocelot_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP2) /* int0 hardware line */ + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) /* int1 hardware line */ + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) /* int2 hardware line */ + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) /* int3 hardware line */ + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) /* int4 hardware line */ + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) /* int6 hardware line */ + do_IRQ(8, regs); + else if (pending & STATUSF_IP9) /* int7 hardware line */ + do_IRQ(9, regs); + else if (pending & STATUSF_IP10) /* int8 hardware line */ + do_IRQ(10, regs); + else if (pending & STATUSF_IP11) /* int9 hardware line */ + do_IRQ(11, regs); + } +} void __init arch_init_irq(void) { @@ -59,9 +90,6 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); - mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); } diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile index 0e7853f43983..63431538d0ec 100644 --- a/arch/mips/ite-boards/generic/Makefile +++ b/arch/mips/ite-boards/generic/Makefile @@ -6,7 +6,7 @@ # Makefile for the ITE 8172 (qed-4n-s01b) board, generic files. # -obj-y += it8172_setup.o irq.o int-handler.o pmon_prom.o \ +obj-y += it8172_setup.o irq.o pmon_prom.o \ time.o lpc.o puts.o reset.o obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c index c4f8530fd07e..6a7ccaf93502 100644 --- a/arch/mips/ite-boards/generic/dbg_io.c +++ b/arch/mips/ite-boards/generic/dbg_io.c @@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S deleted file mode 100644 index d190d8add9cb..000000000000 --- a/arch/mips/ite-boards/generic/int-handler.S +++ /dev/null @@ -1,63 +0,0 @@ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .text - .set macro - .set noat - .align 5 - -NESTED(it8172_IRQ, PT_SIZE, sp) - SAVE_ALL - CLI # Important: mark KERNEL mode ! - - /* We're working with 'reorder' set at this point. */ - /* - * Get pending interrupts - */ - - mfc0 t0,CP0_CAUSE # get pending interrupts - mfc0 t1,CP0_STATUS # get enabled interrupts - and t0,t1 # isolate allowed ones - - andi t0,0xff00 # isolate pending bits - beqz t0, 3f # spurious interrupt - - andi a0, t0, CAUSEF_IP7 - beq a0, zero, 1f - - li a0, 127 # MIPS_CPU_TIMER_IRQ = (NR_IRQS-1) - move a1, sp - jal ll_timer_interrupt - j ret_from_irq - nop - -1: - andi a0, t0, CAUSEF_IP2 # the only int we expect at this time - beq a0, zero, 3f - move a0,sp - jal it8172_hw0_irqdispatch - - mfc0 t0,CP0_STATUS # disable interrupts - ori t0,1 - xori t0,1 - mtc0 t0,CP0_STATUS - nop - nop - nop - - la a1, ret_from_irq - jr a1 - nop - -3: - move a0, sp - jal mips_spurious_interrupt - nop - la a1, ret_from_irq - jr a1 - nop - -END(it8172_IRQ) - diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c index e67f96129491..77be7216bdd0 100644 --- a/arch/mips/ite-boards/generic/irq.c +++ b/arch/mips/ite-boards/generic/irq.c @@ -62,12 +62,8 @@ #define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -void disable_it8172_irq(unsigned int irq_nr); -void enable_it8172_irq(unsigned int irq_nr); - extern void set_debug_traps(void); extern void mips_timer_interrupt(int irq, struct pt_regs *regs); -extern asmlinkage void it8172_IRQ(void); struct it8172_intc_regs volatile *it8172_hw0_icregs = (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE)); @@ -181,8 +177,6 @@ void __init arch_init_irq(void) int i; unsigned long flags; - set_except_vector(0, it8172_IRQ); - /* mask all interrupts */ it8172_hw0_icregs->lb_mask = 0xffff; it8172_hw0_icregs->lpc_mask = 0xffff; @@ -282,6 +276,18 @@ void it8172_hw0_irqdispatch(struct pt_regs *regs) do_IRQ(irq, regs); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (!pending) + mips_spurious_interrupt(regs); + else if (pending & CAUSEF_IP7) + ll_timer_interrupt(127, regs); + else if (pending & CAUSEF_IP2) + it8172_hw0_irqdispatch(regs); +} + void show_pending_irqs(void) { fputs("intstatus: "); diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c index b79817bb6cce..dee497a91807 100644 --- a/arch/mips/ite-boards/generic/time.c +++ b/arch/mips/ite-boards/generic/time.c @@ -29,6 +29,7 @@ #include <linux/sched.h> #include <linux/time.h> #include <linux/spinlock.h> +#include <linux/mc146818rtc.h> #include <asm/time.h> #include <asm/mipsregs.h> diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c index b774db035b31..05cf9218c432 100644 --- a/arch/mips/ite-boards/ivr/init.c +++ b/arch/mips/ite-boards/ivr/init.c @@ -34,13 +34,13 @@ #include <asm/bootinfo.h> #include <linux/string.h> #include <linux/kernel.h> +#include <asm/sections.h> #include <asm/it8172/it8172.h> #include <asm/it8172/it8172_dbg.h> int prom_argc; char **prom_argv, **prom_envp; -extern char _end; extern void __init prom_init_cmdline(void); extern unsigned long __init prom_get_memsize(void); extern void __init it8172_init_ram_resource(unsigned long memsize); diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c index e8ec8be66a80..ea2a754cafe5 100644 --- a/arch/mips/ite-boards/qed-4n-s01b/init.c +++ b/arch/mips/ite-boards/qed-4n-s01b/init.c @@ -34,13 +34,13 @@ #include <asm/bootinfo.h> #include <linux/string.h> #include <linux/kernel.h> +#include <asm/sections.h> #include <asm/it8172/it8172.h> #include <asm/it8172/it8172_dbg.h> int prom_argc; char **prom_argv, **prom_envp; -extern char _end; extern void __init prom_init_cmdline(void); extern unsigned long __init prom_get_memsize(void); extern void __init it8172_init_ram_resource(unsigned long memsize); diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile index 85749246a671..02bd39add891 100644 --- a/arch/mips/jazz/Makefile +++ b/arch/mips/jazz/Makefile @@ -2,6 +2,6 @@ # Makefile for the Jazz family specific parts of the kernel # -obj-y := int-handler.o irq.o jazzdma.o reset.o setup.o +obj-y := irq.o jazzdma.o reset.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S deleted file mode 100644 index dc752c67b528..000000000000 --- a/arch/mips/jazz/int-handler.S +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse - * - * Jazz family specific interrupt stuff - * - * To do: On Jazz machines we remap some non-ISA interrupts to ISA - * interrupts. These interrupts should use their own vectors. - * Squeeze the last cycles out of the handlers. Only a dead - * cycle is a good cycle. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/jazz.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards - */ - .set noreorder - - NESTED(jazz_handle_int, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI - .set at - - /* - * Get pending interrupts - */ - mfc0 t0,CP0_CAUSE # get pending interrupts - mfc0 t1,CP0_STATUS # get enabled interrupts - and t0,t1 # isolate allowed ones - andi t0,0xff00 # isolate pending bits - beqz t0,3f - sll t0,16 # delay slot - - /* - * Find irq with highest priority - * FIXME: This is slow - use binary search - */ - la t1,ll_vectors -1: bltz t0,2f # found pending irq - sll t0,1 - b 1b - subu t1,PTRSIZE # delay slot - - /* - * Do the low-level stuff - */ -2: lw t0,(t1) - jr t0 - nop # delay slot - END(jazz_handle_int) - -ll_sw0: li s1,~IE_SW0 - mfc0 t0,CP0_CAUSE - and t0,s1 - mtc0 t0,CP0_CAUSE - PANIC("Unimplemented sw0 handler") - -ll_sw1: li s1,~IE_SW1 - mfc0 t0,CP0_CAUSE - and t0,s1 - mtc0 t0,CP0_CAUSE - PANIC("Unimplemented sw1 handler") - -ll_local_dma: li s1,~IE_IRQ0 - PANIC("Unimplemented local_dma handler") - -ll_local_dev: lbu t0,JAZZ_IO_IRQ_SOURCE -#if PTRSIZE == 8 /* True 64 bit kernel */ - dsll t0,1 -#endif - .set reorder - LONG_L t0,local_vector(t0) - jr t0 - .set noreorder - -/* - * The braindead PICA hardware gives us no way to distinguish if we really - * received interrupt 7 from the (E)ISA bus or if we just received an - * interrupt with no findable cause. This sometimes happens with braindead - * cards. Oh well - for all the Jazz boxes slots are more or less just - * whistles and bells and we're aware of the problem. - */ -ll_isa_irq: lw a0, JAZZ_EISA_IRQ_ACK - - jal do_IRQ - move a1,sp - - j ret_from_irq - nop - -/* - * Hmm... This is not just a plain PC clone so the question is - * which devices on Jazz machines can generate an (E)ISA NMI? - * (Writing to nonexistent memory?) - */ -ll_isa_nmi: li s1,~IE_IRQ3 - PANIC("Unimplemented isa_nmi handler") - -/* - * Timer IRQ - remapped to be more similar to an IBM compatible. - * - * The timer interrupt is handled specially to ensure that the jiffies - * variable is updated at all times. Specifically, the timer interrupt is - * just like the complete handlers except that it is invoked with interrupts - * disabled and should never re-enable them. If other interrupts were - * allowed to be processed while the timer interrupt is active, then the - * other interrupts would have to avoid using the jiffies variable for delay - * and interval timing operations to avoid hanging the system. - */ -ll_timer: lw zero,JAZZ_TIMER_REGISTER # timer irq cleared on read - li s1,~IE_IRQ4 - - li a0, JAZZ_TIMER_IRQ - jal do_IRQ - move a1,sp - - mfc0 t0,CP0_STATUS # disable interrupts again - ori t0,1 - xori t0,1 - mtc0 t0,CP0_STATUS - - j ret_from_irq - nop - -/* - * CPU count/compare IRQ (unused) - */ -ll_count: j ret_from_irq - mtc0 zero,CP0_COMPARE - -#if 0 -/* - * Call the handler for the interrupt - * (Currently unused) - */ -call_real: /* - * temporarily disable interrupt - */ - mfc0 t2,CP0_STATUS - and t2,s1 - mtc0 t2,CP0_STATUS - nor s1,zero,s1 - jal do_IRQ - - /* - * reenable interrupt - */ - mfc0 t2,CP0_STATUS - or t2,s1 - mtc0 t2,CP0_STATUS - j ret_from_irq -#endif - - .data - PTR ll_sw0 # SW0 - PTR ll_sw1 # SW1 - PTR ll_local_dma # Local DMA - PTR ll_local_dev # Local devices - PTR ll_isa_irq # ISA IRQ - PTR ll_isa_nmi # ISA NMI - PTR ll_timer # Timer -ll_vectors: PTR ll_count # Count/Compare IRQ - - /* - * Interrupt handlers for local devices. - */ - .text - .set reorder -loc_no_irq: PANIC("Unimplemented loc_no_irq handler") -/* - * Parallel port IRQ - */ -loc_parallel: li s1,~JAZZ_IE_PARALLEL - li a0,JAZZ_PARALLEL_IRQ - b loc_call - -/* - * Floppy IRQ - */ -loc_floppy: li s1,~JAZZ_IE_FLOPPY - li a0,JAZZ_FLOPPY_IRQ - b loc_call - -/* - * Sound IRQ - */ -loc_sound: PANIC("Unimplemented loc_sound handler") -loc_video: PANIC("Unimplemented loc_video handler") - -/* - * Ethernet interrupt handler - */ -loc_ethernet: li s1,~JAZZ_IE_ETHERNET - li a0,JAZZ_ETHERNET_IRQ - b loc_call - -/* - * SCSI interrupt handler - */ -loc_scsi: li s1,~JAZZ_IE_SCSI - li a0,JAZZ_SCSI_IRQ - b loc_call - -/* - * Keyboard interrupt handler - */ -loc_keyboard: li s1,~JAZZ_IE_KEYBOARD - li a0,JAZZ_KEYBOARD_IRQ - b loc_call - -/* - * Mouse interrupt handler - */ -loc_mouse: li s1,~JAZZ_IE_MOUSE - li a0,JAZZ_MOUSE_IRQ - b loc_call - -/* - * Serial port 1 IRQ - */ -loc_serial1: li s1,~JAZZ_IE_SERIAL1 - li a0,JAZZ_SERIAL1_IRQ - b loc_call - -/* - * Serial port 2 IRQ - */ -loc_serial2: li s1,~JAZZ_IE_SERIAL2 - li a0,JAZZ_SERIAL2_IRQ - b loc_call - -/* - * Call the interrupt handler for an interrupt generated by a - * local device. - */ -loc_call: /* - * Temporarily disable interrupt source - */ - lhu t2,JAZZ_IO_IRQ_ENABLE - and t2,s1 - sh t2,JAZZ_IO_IRQ_ENABLE - - nor s1,zero,s1 - jal do_IRQ - - /* - * Reenable interrupt - */ - lhu t2,JAZZ_IO_IRQ_ENABLE - or t2,s1 - sh t2,JAZZ_IO_IRQ_ENABLE - - j ret_from_irq - -/* - * "Jump extender" to reach spurious_interrupt - */ -3: j spurious_interrupt - -/* - * Vectors for interrupts generated by local devices - */ - .data -local_vector: PTR loc_no_irq - PTR loc_parallel - PTR loc_floppy - PTR loc_sound - PTR loc_video - PTR loc_ethernet - PTR loc_scsi - PTR loc_keyboard - PTR loc_mouse - PTR loc_serial1 - PTR loc_serial2 diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index b309b1bcf2e8..becc9accd495 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -15,8 +15,6 @@ #include <asm/io.h> #include <asm/jazz.h> -extern asmlinkage void jazz_handle_int(void); - static DEFINE_SPINLOCK(r4030_lock); static void enable_r4030_irq(unsigned int irq) @@ -90,10 +88,82 @@ void __init init_r4030_ints(void) */ void __init arch_init_irq(void) { - set_except_vector(0, jazz_handle_int); - init_i8259_irqs(); /* Integrated i8259 */ init_r4030_ints(); change_c0_status(ST0_IM, IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1); } + +static void loc_call(unsigned int irq, struct pt_regs *regs, unsigned int mask) +{ + r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, + r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) & mask); + do_IRQ(irq, regs); + r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, + r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) | mask); +} + +static void ll_local_dev(struct pt_regs *regs) +{ + switch (r4030_read_reg32(JAZZ_IO_IRQ_SOURCE)) { + case 0: + panic("Unimplemented loc_no_irq handler"); + break; + case 4: + loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_PARALLEL); + break; + case 8: + loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_FLOPPY); + break; + case 12: + panic("Unimplemented loc_sound handler"); + break; + case 16: + panic("Unimplemented loc_video handler"); + break; + case 20: + loc_call(JAZZ_ETHERNET_IRQ, regs, JAZZ_IE_ETHERNET); + break; + case 24: + loc_call(JAZZ_SCSI_IRQ, regs, JAZZ_IE_SCSI); + break; + case 28: + loc_call(JAZZ_KEYBOARD_IRQ, regs, JAZZ_IE_KEYBOARD); + break; + case 32: + loc_call(JAZZ_MOUSE_IRQ, regs, JAZZ_IE_MOUSE); + break; + case 36: + loc_call(JAZZ_SERIAL1_IRQ, regs, JAZZ_IE_SERIAL1); + break; + case 40: + loc_call(JAZZ_SERIAL2_IRQ, regs, JAZZ_IE_SERIAL2); + break; + } +} + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & IE_IRQ5) + write_c0_compare(0); + else if (pending & IE_IRQ4) { + r4030_read_reg32(JAZZ_TIMER_REGISTER); + do_IRQ(JAZZ_TIMER_IRQ, regs); + } else if (pending & IE_IRQ3) + panic("Unimplemented ISA NMI handler"); + else if (pending & IE_IRQ2) + do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK), regs); + else if (pending & IE_IRQ1) { + ll_local_dev(regs); + } else if (unlikely(pending & IE_IRQ0)) + panic("Unimplemented local_dma handler"); + else if (pending & IE_SW1) { + clear_c0_cause(IE_SW1); + panic("Unimplemented sw1 handler"); + } else if (pending & IE_SW0) { + clear_c0_cause(IE_SW0); + panic("Unimplemented sw0 handler"); + } +} diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index a6bd3f4d3049..e6561345d12a 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -60,15 +60,15 @@ rtc_ds1742_get_time(void) unsigned long flags; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(RTC_READ, RTC_CONTROL); - second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); - minute = BCD2BIN(CMOS_READ(RTC_MINUTES)); - hour = BCD2BIN(CMOS_READ(RTC_HOURS)); - day = BCD2BIN(CMOS_READ(RTC_DATE)); - month = BCD2BIN(CMOS_READ(RTC_MONTH)); - year = BCD2BIN(CMOS_READ(RTC_YEAR)); - century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK); - CMOS_WRITE(0, RTC_CONTROL); + rtc_write(RTC_READ, RTC_CONTROL); + second = BCD2BIN(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK); + minute = BCD2BIN(rtc_read(RTC_MINUTES)); + hour = BCD2BIN(rtc_read(RTC_HOURS)); + day = BCD2BIN(rtc_read(RTC_DATE)); + month = BCD2BIN(rtc_read(RTC_MONTH)); + year = BCD2BIN(rtc_read(RTC_YEAR)); + century = BCD2BIN(rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK); + rtc_write(0, RTC_CONTROL); spin_unlock_irqrestore(&rtc_lock, flags); year += century * 100; @@ -87,16 +87,16 @@ rtc_ds1742_set_time(unsigned long t) unsigned long flags; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(RTC_READ, RTC_CONTROL); - cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); - cmos_minute = (u8)CMOS_READ(RTC_MINUTES); - cmos_hour = (u8)CMOS_READ(RTC_HOURS); - cmos_day = (u8)CMOS_READ(RTC_DATE); - cmos_month = (u8)CMOS_READ(RTC_MONTH); - cmos_year = (u8)CMOS_READ(RTC_YEAR); - cmos_century = CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK; + rtc_write(RTC_READ, RTC_CONTROL); + cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK); + cmos_minute = (u8)rtc_read(RTC_MINUTES); + cmos_hour = (u8)rtc_read(RTC_HOURS); + cmos_day = (u8)rtc_read(RTC_DATE); + cmos_month = (u8)rtc_read(RTC_MONTH); + cmos_year = (u8)rtc_read(RTC_YEAR); + cmos_century = rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK; - CMOS_WRITE(RTC_WRITE, RTC_CONTROL); + rtc_write(RTC_WRITE, RTC_CONTROL); /* convert */ to_tm(t, &tm); @@ -104,18 +104,18 @@ rtc_ds1742_set_time(unsigned long t) /* check each field one by one */ year = BIN2BCD(tm.tm_year - EPOCH); if (year != cmos_year) { - CMOS_WRITE(year,RTC_YEAR); + rtc_write(year,RTC_YEAR); } month = BIN2BCD(tm.tm_mon); if (month != (cmos_month & 0x1f)) { - CMOS_WRITE((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH); + rtc_write((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH); } day = BIN2BCD(tm.tm_mday); if (day != cmos_day) { - CMOS_WRITE(day, RTC_DATE); + rtc_write(day, RTC_DATE); } if (cmos_hour & 0x40) { @@ -130,20 +130,20 @@ rtc_ds1742_set_time(unsigned long t) /* 24 hour format */ hour = BIN2BCD(tm.tm_hour) & 0x3f; } - if (hour != cmos_hour) CMOS_WRITE(hour, RTC_HOURS); + if (hour != cmos_hour) rtc_write(hour, RTC_HOURS); minute = BIN2BCD(tm.tm_min); if (minute != cmos_minute) { - CMOS_WRITE(minute, RTC_MINUTES); + rtc_write(minute, RTC_MINUTES); } second = BIN2BCD(tm.tm_sec); if (second != cmos_second) { - CMOS_WRITE(second & RTC_SECONDS_MASK,RTC_SECONDS); + rtc_write(second & RTC_SECONDS_MASK,RTC_SECONDS); } /* RTC_CENTURY and RTC_CONTROL share same address... */ - CMOS_WRITE(cmos_century, RTC_CONTROL); + rtc_write(cmos_century, RTC_CONTROL); spin_unlock_irqrestore(&rtc_lock, flags); return 0; @@ -163,9 +163,9 @@ rtc_ds1742_init(unsigned long base) rtc_mips_set_time = rtc_ds1742_set_time; /* clear oscillator stop bit */ - CMOS_WRITE(RTC_READ, RTC_CONTROL); - cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); - CMOS_WRITE(RTC_WRITE, RTC_CONTROL); - CMOS_WRITE(cmos_second, RTC_SECONDS); /* clear msb */ - CMOS_WRITE(0, RTC_CONTROL); + rtc_write(RTC_READ, RTC_CONTROL); + cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK); + rtc_write(RTC_WRITE, RTC_CONTROL); + rtc_write(cmos_second, RTC_SECONDS); /* clear msb */ + rtc_write(0, RTC_CONTROL); } diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile index 75bf418b94c0..baf5077813c1 100644 --- a/arch/mips/jmr3927/rbhma3100/Makefile +++ b/arch/mips/jmr3927/rbhma3100/Makefile @@ -2,7 +2,7 @@ # Makefile for TOSHIBA JMR-TX3927 board # -obj-y += init.o int-handler.o irq.o setup.o +obj-y += init.o irq.o setup.o obj-$(CONFIG_RUNTIME_DEBUG) += debug.o obj-$(CONFIG_KGDB) += kgdb_io.o diff --git a/arch/mips/jmr3927/rbhma3100/int-handler.S b/arch/mips/jmr3927/rbhma3100/int-handler.S deleted file mode 100644 index f85bbf407542..000000000000 --- a/arch/mips/jmr3927/rbhma3100/int-handler.S +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Based on arch/mips/tsdb/kernel/int-handler.S - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/jmr3927/jmr3927.h> - - /* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop - * and moving across all the pending IRQ bits in the cause - * register is _NOT_ the answer, the common case is one - * pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register - * IRQ mask, that would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs - * off, nothing in between like BSD spl() brain-damage. - * - */ - -/* Flush write buffer (needed?) - * NOTE: TX39xx performs "non-blocking load", so explicitly use the target - * register of LBU to flush immediately. - */ -#define FLUSH_WB(tmp) \ - la tmp, JMR3927_IOC_REV_ADDR; \ - lbu tmp, (tmp); \ - move tmp, zero; - - .text - .set noreorder - .set noat - .align 5 - NESTED(jmr3927_IRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - jal jmr3927_irc_irqdispatch - move a0, sp - FLUSH_WB(t0) - j ret_from_irq - nop - END(jmr3927_IRQ) diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 2810727f1d4e..11304d1354f4 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -77,8 +77,6 @@ static int jmr3927_gen_iack(void) } #endif -extern asmlinkage void jmr3927_IRQ(void); - #define irc_dlevel 0 #define irc_elevel 1 @@ -262,7 +260,7 @@ void jmr3927_spurious(struct pt_regs *regs) regs->cp0_cause, regs->cp0_epc, regs->regs[31]); } -void jmr3927_irc_irqdispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { int irq; @@ -398,8 +396,6 @@ void __init arch_init_irq(void) jmr3927_irq_init(NR_ISA_IRQS); - set_except_vector(0, jmr3927_IRQ); - /* setup irq space */ add_tb_irq_space(&jmr3927_isac_irqspace); add_tb_irq_space(&jmr3927_ioc_irqspace); diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 309d54cceda3..34e8a256765c 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -34,8 +34,11 @@ obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o +obj-$(CONFIG_MIPS_MT) += mips-mt.o +obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o +obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o +obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index ca6b03c773be..0facfaf4e950 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -69,6 +69,9 @@ void output_ptreg_defines(void) offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr); offset("#define PT_STATUS ", struct pt_regs, cp0_status); offset("#define PT_CAUSE ", struct pt_regs, cp0_cause); +#ifdef CONFIG_MIPS_MT_SMTC + offset("#define PT_TCSTATUS ", struct pt_regs, cp0_tcstatus); +#endif /* CONFIG_MIPS_MT_SMTC */ size("#define PT_SIZE ", struct pt_regs); linefeed; } @@ -269,8 +272,8 @@ void output_sc_defines(void) text("/* Linux sigcontext offsets. */"); offset("#define SC_REGS ", struct sigcontext, sc_regs); offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs); - offset("#define SC_MDHI ", struct sigcontext, sc_hi); - offset("#define SC_MDLO ", struct sigcontext, sc_lo); + offset("#define SC_MDHI ", struct sigcontext, sc_mdhi); + offset("#define SC_MDLO ", struct sigcontext, sc_mdlo); offset("#define SC_PC ", struct sigcontext, sc_pc); offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr); linefeed; diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 374de839558d..b6232d9033cb 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -184,7 +184,7 @@ int __compute_return_epc(struct pt_regs *regs) bit = (insn.i_format.rt >> 2); bit += (bit != 0); bit += 23; - switch (insn.i_format.rt) { + switch (insn.i_format.rt & 3) { case 0: /* bc1f */ case 2: /* bc1fl */ if (~fcr31 & (1 << bit)) diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index 47a087b6c11b..d268827c62bd 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -206,7 +206,7 @@ static inline void check_daddi(void) "daddi %0, %1, %3\n\t" ".set pop" : "=r" (v), "=&r" (tmp) - : "I" (0xffffffffffffdb9a), "I" (0x1234)); + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); set_except_vector(12, handler); local_irq_restore(flags); @@ -224,7 +224,7 @@ static inline void check_daddi(void) "dsrl %1, %1, 1\n\t" "daddi %0, %1, %3" : "=r" (v), "=&r" (tmp) - : "I" (0xffffffffffffdb9a), "I" (0x1234)); + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); set_except_vector(12, handler); local_irq_restore(flags); @@ -280,7 +280,7 @@ static inline void check_daddiu(void) "daddu %1, %2\n\t" ".set pop" : "=&r" (v), "=&r" (w), "=&r" (tmp) - : "I" (0xffffffffffffdb9a), "I" (0x1234)); + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); if (v == w) { printk("no.\n"); @@ -296,7 +296,7 @@ static inline void check_daddiu(void) "addiu %1, $0, %4\n\t" "daddu %1, %2" : "=&r" (v), "=&r" (w), "=&r" (tmp) - : "I" (0xffffffffffffdb9a), "I" (0x1234)); + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); if (v == w) { printk("yes.\n"); diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 58b3b14873cb..8c2c359a05f4 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -121,6 +121,7 @@ static inline void check_wait(void) case CPU_24K: case CPU_25KF: case CPU_34K: + case CPU_74K: case CPU_PR4450: cpu_wait = r4k_wait; printk(" available.\n"); @@ -432,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) MIPS_CPU_LLSC; c->tlbsize = 64; break; + case PRID_IMP_R14000: + c->cputype = CPU_R14000; + c->isa_level = MIPS_CPU_ISA_IV; + c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | + MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_COUNTER | MIPS_CPU_WATCH | + MIPS_CPU_LLSC; + c->tlbsize = 64; + break; } } @@ -593,6 +603,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c) case PRID_IMP_34K: c->cputype = CPU_34K; break; + case PRID_IMP_74K: + c->cputype = CPU_74K; + break; } } @@ -642,7 +655,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c) case PRID_IMP_SB1: c->cputype = CPU_SB1; /* FPU in pass1 is known to have issues. */ - if ((c->processor_id & 0xff) < 0x20) + if ((c->processor_id & 0xff) < 0x02) c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); break; case PRID_IMP_SB1A: diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 83c87fe4ee4f..a9c6de1b9542 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -17,6 +17,9 @@ #include <asm/isadep.h> #include <asm/thread_info.h> #include <asm/war.h> +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/mipsmtregs.h> +#endif #ifdef CONFIG_PREEMPT .macro preempt_stop @@ -75,6 +78,37 @@ FEXPORT(syscall_exit) bnez t0, syscall_exit_work FEXPORT(restore_all) # restore full frame +#ifdef CONFIG_MIPS_MT_SMTC +/* Detect and execute deferred IPI "interrupts" */ + move a0,sp + jal deferred_smtc_ipi +/* Re-arm any temporarily masked interrupts not explicitly "acked" */ + mfc0 v0, CP0_TCSTATUS + ori v1, v0, TCSTATUS_IXMT + mtc0 v1, CP0_TCSTATUS + andi v0, TCSTATUS_IXMT + ehb + mfc0 t0, CP0_TCCONTEXT + DMT 9 # dmt t1 + jal mips_ihb + mfc0 t2, CP0_STATUS + andi t3, t0, 0xff00 + or t2, t2, t3 + mtc0 t2, CP0_STATUS + ehb + andi t1, t1, VPECONTROL_TE + beqz t1, 1f + EMT +1: + mfc0 v1, CP0_TCSTATUS + /* We set IXMT above, XOR should clear it here */ + xori v1, v1, TCSTATUS_IXMT + or v1, v0, v1 + mtc0 v1, CP0_TCSTATUS + ehb + xor t0, t0, t3 + mtc0 t0, CP0_TCCONTEXT +#endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP RESTORE_AT @@ -120,28 +154,17 @@ syscall_exit_work: jal do_syscall_trace b resume_userspace +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT) + /* - * Common spurious interrupt handler. + * MIPS32R2 Instruction Hazard Barrier - must be called + * + * For C code use the inline version named instruction_hazard(). */ -LEAF(spurious_interrupt) - /* - * Someone tried to fool us by sending an interrupt but we - * couldn't find a cause for it. - */ - PTR_LA t1, irq_err_count -#ifdef CONFIG_SMP -1: ll t0, (t1) - addiu t0, 1 - sc t0, (t1) -#if R10000_LLSC_WAR - beqzl t0, 1b -#else - beqz t0, 1b -#endif -#else - lw t0, (t1) - addiu t0, 1 - sw t0, (t1) -#endif - j ret_from_irq - END(spurious_interrupt) +LEAF(mips_ihb) + .set mips32r2 + jr.hb ra + nop + END(mips_ihb) + +#endif /* CONFIG_CPU_MIPSR2 or CONFIG_MIPS_MT */ diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S index 235ad9f6bd35..5fd7a8af0c62 100644 --- a/arch/mips/kernel/gdb-low.S +++ b/arch/mips/kernel/gdb-low.S @@ -54,9 +54,11 @@ */ mfc0 k0, CP0_CAUSE andi k0, k0, 0x7c - add k1, k1, k0 - PTR_L k0, saved_vectors(k1) - jr k0 +#ifdef CONFIG_64BIT + dsll k0, k0, 1 +#endif + PTR_L k1, saved_vectors(k0) + jr k1 nop 1: move k0, sp @@ -283,11 +285,33 @@ */ 3: +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify write of Status must be atomic */ + mfc0 t2, CP0_TCSTATUS + ori t1, t2, TCSTATUS_IXMT + mtc0 t1, CP0_TCSTATUS + andi t2, t2, TCSTATUS_IXMT + ehb + DMT 9 # dmt t1 + jal mips_ihb + nop +#endif /* CONFIG_MIPS_MT_SMTC */ mfc0 t0, CP0_STATUS ori t0, 0x1f xori t0, 0x1f mtc0 t0, CP0_STATUS - +#ifdef CONFIG_MIPS_MT_SMTC + andi t1, t1, VPECONTROL_TE + beqz t1, 9f + nop + EMT # emt +9: + mfc0 t1, CP0_TCSTATUS + xori t1, t1, TCSTATUS_IXMT + or t1, t1, t2 + mtc0 t1, CP0_TCSTATUS + ehb +#endif /* CONFIG_MIPS_MT_SMTC */ LONG_L v0, GDB_FR_STATUS(sp) LONG_L v1, GDB_FR_EPC(sp) mtc0 v0, CP0_STATUS diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c index d4f88e0af24c..6ecbdc1fefd1 100644 --- a/arch/mips/kernel/gdb-stub.c +++ b/arch/mips/kernel/gdb-stub.c @@ -140,6 +140,7 @@ #include <asm/system.h> #include <asm/gdb-stub.h> #include <asm/inst.h> +#include <asm/smp.h> /* * external low-level support routines @@ -669,6 +670,64 @@ static void kgdb_wait(void *arg) local_irq_restore(flags); } +/* + * GDB stub needs to call kgdb_wait on all processor with interrupts + * disabled, so it uses it's own special variant. + */ +static int kgdb_smp_call_kgdb_wait(void) +{ +#ifdef CONFIG_SMP + struct call_data_struct data; + int i, cpus = num_online_cpus() - 1; + int cpu = smp_processor_id(); + + /* + * Can die spectacularly if this CPU isn't yet marked online + */ + BUG_ON(!cpu_online(cpu)); + + if (!cpus) + return 0; + + if (spin_is_locked(&smp_call_lock)) { + /* + * Some other processor is trying to make us do something + * but we're not going to respond... give up + */ + return -1; + } + + /* + * We will continue here, accepting the fact that + * the kernel may deadlock if another CPU attempts + * to call smp_call_function now... + */ + + data.func = kgdb_wait; + data.info = NULL; + atomic_set(&data.started, 0); + data.wait = 0; + + spin_lock(&smp_call_lock); + call_data = &data; + mb(); + + /* Send a message to all other CPUs and wait for them to respond */ + for (i = 0; i < NR_CPUS; i++) + if (cpu_online(i) && i != cpu) + core_send_ipi(i, SMP_CALL_FUNCTION); + + /* Wait for response */ + /* FIXME: lock-up detection, backtrace on lock-up */ + while (atomic_read(&data.started) != cpus) + barrier(); + + call_data = NULL; + spin_unlock(&smp_call_lock); +#endif + + return 0; +} /* * This function does all command processing for interfacing to gdb. It @@ -718,7 +777,7 @@ void handle_exception (struct gdb_regs *regs) /* * force other cpus to enter kgdb */ - smp_call_function(kgdb_wait, NULL, 0, 0); + kgdb_smp_call_kgdb_wait(); /* * If we're in breakpoint() increment the PC diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 13f22d1d0e8b..ff7af369f286 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -12,6 +12,7 @@ #include <linux/init.h> #include <asm/asm.h> +#include <asm/asmmacro.h> #include <asm/cacheops.h> #include <asm/regdef.h> #include <asm/fpregdef.h> @@ -122,6 +123,20 @@ handle_vcei: .set pop END(except_vec3_r4000) + __FINIT + + .align 5 +NESTED(handle_int, PT_SIZE, sp) + SAVE_ALL + CLI + + PTR_LA ra, ret_from_irq + move a0, sp + j plat_irq_dispatch + END(handle_int) + + __INIT + /* * Special interrupt vector for MIPS64 ISA & embedded MIPS processors. * This is a dedicated interrupt exception vector which reduces the @@ -157,6 +172,15 @@ NESTED(except_vec_vi, 0, sp) SAVE_AT .set push .set noreorder +#ifdef CONFIG_MIPS_MT_SMTC + /* + * To keep from blindly blocking *all* interrupts + * during service by SMTC kernel, we also want to + * pass the IM value to be cleared. + */ +EXPORT(except_vec_vi_mori) + ori a0, $0, 0 +#endif /* CONFIG_MIPS_MT_SMTC */ EXPORT(except_vec_vi_lui) lui v0, 0 /* Patched */ j except_vec_vi_handler @@ -173,6 +197,25 @@ EXPORT(except_vec_vi_end) NESTED(except_vec_vi_handler, 0, sp) SAVE_TEMP SAVE_STATIC +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC has an interesting problem that interrupts are level-triggered, + * and the CLI macro will clear EXL, potentially causing a duplicate + * interrupt service invocation. So we need to clear the associated + * IM bit of Status prior to doing CLI, and restore it after the + * service routine has been invoked - we must assume that the + * service routine will have cleared the state, and any active + * level represents a new or otherwised unserviced event... + */ + mfc0 t1, CP0_STATUS + and t0, a0, t1 + mfc0 t2, CP0_TCCONTEXT + or t0, t0, t2 + mtc0 t0, CP0_TCCONTEXT + xor t1, t1, t0 + mtc0 t1, CP0_STATUS + ehb +#endif /* CONFIG_MIPS_MT_SMTC */ CLI move a0, sp jalr v0 diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 2e9122a4213a..bdf6f6eff721 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -18,6 +18,7 @@ #include <linux/threads.h> #include <asm/asm.h> +#include <asm/asmmacro.h> #include <asm/regdef.h> #include <asm/page.h> #include <asm/mipsregs.h> @@ -82,12 +83,33 @@ */ .macro setup_c0_status set clr .set push +#ifdef CONFIG_MIPS_MT_SMTC + /* + * For SMTC, we need to set privilege and disable interrupts only for + * the current TC, using the TCStatus register. + */ + mfc0 t0, CP0_TCSTATUS + /* Fortunately CU 0 is in the same place in both registers */ + /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ + li t1, ST0_CU0 | 0x08001c00 + or t0, t1 + /* Clear TKSU, leave IXMT */ + xori t0, 0x00001800 + mtc0 t0, CP0_TCSTATUS + ehb + /* We need to leave the global IE bit set, but clear EXL...*/ + mfc0 t0, CP0_STATUS + or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr + xor t0, ST0_EXL | ST0_ERL | \clr + mtc0 t0, CP0_STATUS +#else mfc0 t0, CP0_STATUS or t0, ST0_CU0|\set|0x1f|\clr xor t0, 0x1f|\clr mtc0 t0, CP0_STATUS .set noreorder sll zero,3 # ehb +#endif .set pop .endm @@ -134,6 +156,24 @@ NESTED(kernel_entry, 16, sp) # kernel entry point ARC64_TWIDDLE_PC +#ifdef CONFIG_MIPS_MT_SMTC + /* + * In SMTC kernel, "CLI" is thread-specific, in TCStatus. + * We still need to enable interrupts globally in Status, + * and clear EXL/ERL. + * + * TCContext is used to track interrupt levels under + * service in SMTC kernel. Clear for boot TC before + * allowing any interrupts. + */ + mtc0 zero, CP0_TCCONTEXT + + mfc0 t0, CP0_STATUS + ori t0, t0, 0xff1f + xori t0, t0, 0x001e + mtc0 t0, CP0_STATUS +#endif /* CONFIG_MIPS_MT_SMTC */ + PTR_LA t0, __bss_start # clear .bss LONG_S zero, (t0) PTR_LA t1, __bss_stop - LONGSIZE @@ -166,8 +206,25 @@ NESTED(kernel_entry, 16, sp) # kernel entry point * function after setting up the stack and gp registers. */ NESTED(smp_bootstrap, 16, sp) +#ifdef CONFIG_MIPS_MT_SMTC + /* + * Read-modify-writes of Status must be atomic, and this + * is one case where CLI is invoked without EXL being + * necessarily set. The CLI and setup_c0_status will + * in fact be redundant for all but the first TC of + * each VPE being booted. + */ + DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */ + jal mips_ihb +#endif /* CONFIG_MIPS_MT_SMTC */ setup_c0_status_sec smp_slave_setup +#ifdef CONFIG_MIPS_MT_SMTC + andi t2, t2, VPECONTROL_TE + beqz t2, 2f + EMT # emt +2: +#endif /* CONFIG_MIPS_MT_SMTC */ j start_secondary END(smp_bootstrap) #endif /* CONFIG_SMP */ diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index b974ac9057f6..2125ba5f1d9b 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -187,6 +187,10 @@ handle_real_irq: outb(cached_21,0x21); outb(0x60+irq,0x20); /* 'Specific EOI' to master */ } +#ifdef CONFIG_MIPS_MT_SMTC + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +#endif /* CONFIG_MIPS_MT_SMTC */ spin_unlock_irqrestore(&i8259A_lock, flags); return; diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 3f653c7cfbf3..97ebdc754b9e 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -76,6 +76,11 @@ static void level_mask_and_ack_msc_irq(unsigned int irq) mask_msc_irq(irq); if (!cpu_has_veic) MSCIC_WRITE(MSC01_IC_EOI, 0); +#ifdef CONFIG_MIPS_MT_SMTC + /* This actually needs to be a call into platform code */ + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +#endif /* CONFIG_MIPS_MT_SMTC */ } /* @@ -92,6 +97,10 @@ static void edge_mask_and_ack_msc_irq(unsigned int irq) MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT); MSCIC_WRITE(MSC01_IC_SUP+irq*8, r); } +#ifdef CONFIG_MIPS_MT_SMTC + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +#endif /* CONFIG_MIPS_MT_SMTC */ } /* diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 3dd76b3d2967..3dce742e716f 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -38,6 +38,15 @@ void ack_bad_irq(unsigned int irq) atomic_t irq_err_count; +#ifdef CONFIG_MIPS_MT_SMTC +/* + * SMTC Kernel needs to manipulate low-level CPU interrupt mask + * in do_IRQ. These are passed in setup_irq_smtc() and stored + * in this table. + */ +unsigned long irq_hwmask[NR_IRQS]; +#endif /* CONFIG_MIPS_MT_SMTC */ + #undef do_IRQ /* @@ -49,6 +58,7 @@ asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs) { irq_enter(); + __DO_IRQ_SMTC_HOOK(); __do_IRQ(irq, regs); irq_exit(); @@ -101,6 +111,11 @@ skip: return 0; } +asmlinkage void spurious_interrupt(struct pt_regs *regs) +{ + atomic_inc(&irq_err_count); +} + #ifdef CONFIG_KGDB extern void breakpoint(void); extern void set_debug_traps(void); @@ -124,6 +139,9 @@ void __init init_IRQ(void) irq_desc[i].depth = 1; irq_desc[i].handler = &no_irq_type; spin_lock_init(&irq_desc[i].lock); +#ifdef CONFIG_MIPS_MT_SMTC + irq_hwmask[i] = 0; +#endif /* CONFIG_MIPS_MT_SMTC */ } arch_init_irq(); diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c new file mode 100644 index 000000000000..f06a144c7881 --- /dev/null +++ b/arch/mips/kernel/kspd.c @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/unistd.h> +#include <linux/file.h> +#include <linux/fs.h> +#include <linux/syscalls.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/list.h> + +#include <asm/vpe.h> +#include <asm/rtlx.h> +#include <asm/kspd.h> + +static struct workqueue_struct *workqueue = NULL; +static struct work_struct work; + +extern unsigned long cpu_khz; + +struct mtsp_syscall { + int cmd; + unsigned char abi; + unsigned char size; +}; + +struct mtsp_syscall_ret { + int retval; + int errno; +}; + +struct mtsp_syscall_generic { + int arg0; + int arg1; + int arg2; + int arg3; + int arg4; + int arg5; + int arg6; +}; + +static struct list_head kspd_notifylist; +static int sp_stopping = 0; + +/* these should match with those in the SDE kit */ +#define MTSP_SYSCALL_BASE 0 +#define MTSP_SYSCALL_EXIT (MTSP_SYSCALL_BASE + 0) +#define MTSP_SYSCALL_OPEN (MTSP_SYSCALL_BASE + 1) +#define MTSP_SYSCALL_READ (MTSP_SYSCALL_BASE + 2) +#define MTSP_SYSCALL_WRITE (MTSP_SYSCALL_BASE + 3) +#define MTSP_SYSCALL_CLOSE (MTSP_SYSCALL_BASE + 4) +#define MTSP_SYSCALL_LSEEK32 (MTSP_SYSCALL_BASE + 5) +#define MTSP_SYSCALL_ISATTY (MTSP_SYSCALL_BASE + 6) +#define MTSP_SYSCALL_GETTIME (MTSP_SYSCALL_BASE + 7) +#define MTSP_SYSCALL_PIPEFREQ (MTSP_SYSCALL_BASE + 8) +#define MTSP_SYSCALL_GETTOD (MTSP_SYSCALL_BASE + 9) + +#define MTSP_O_RDONLY 0x0000 +#define MTSP_O_WRONLY 0x0001 +#define MTSP_O_RDWR 0x0002 +#define MTSP_O_NONBLOCK 0x0004 +#define MTSP_O_APPEND 0x0008 +#define MTSP_O_SHLOCK 0x0010 +#define MTSP_O_EXLOCK 0x0020 +#define MTSP_O_ASYNC 0x0040 +#define MTSP_O_FSYNC O_SYNC +#define MTSP_O_NOFOLLOW 0x0100 +#define MTSP_O_SYNC 0x0080 +#define MTSP_O_CREAT 0x0200 +#define MTSP_O_TRUNC 0x0400 +#define MTSP_O_EXCL 0x0800 +#define MTSP_O_BINARY 0x8000 + +#define SP_VPE 1 + +struct apsp_table { + int sp; + int ap; +}; + +/* we might want to do the mode flags too */ +struct apsp_table open_flags_table[] = { + { MTSP_O_RDWR, O_RDWR }, + { MTSP_O_WRONLY, O_WRONLY }, + { MTSP_O_CREAT, O_CREAT }, + { MTSP_O_TRUNC, O_TRUNC }, + { MTSP_O_NONBLOCK, O_NONBLOCK }, + { MTSP_O_APPEND, O_APPEND }, + { MTSP_O_NOFOLLOW, O_NOFOLLOW } +}; + +struct apsp_table syscall_command_table[] = { + { MTSP_SYSCALL_OPEN, __NR_open }, + { MTSP_SYSCALL_CLOSE, __NR_close }, + { MTSP_SYSCALL_READ, __NR_read }, + { MTSP_SYSCALL_WRITE, __NR_write }, + { MTSP_SYSCALL_LSEEK32, __NR_lseek } +}; + +static int sp_syscall(int num, int arg0, int arg1, int arg2, int arg3) +{ + register long int _num __asm__ ("$2") = num; + register long int _arg0 __asm__ ("$4") = arg0; + register long int _arg1 __asm__ ("$5") = arg1; + register long int _arg2 __asm__ ("$6") = arg2; + register long int _arg3 __asm__ ("$7") = arg3; + + mm_segment_t old_fs; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + + __asm__ __volatile__ ( + " syscall \n" + : "=r" (_num), "=r" (_arg3) + : "r" (_num), "r" (_arg0), "r" (_arg1), "r" (_arg2), "r" (_arg3)); + + set_fs(old_fs); + + /* $a3 is error flag */ + if (_arg3) + return -_num; + + return _num; +} + +static int translate_syscall_command(int cmd) +{ + int i; + int ret = -1; + + for (i = 0; i < ARRAY_SIZE(syscall_command_table); i++) { + if ((cmd == syscall_command_table[i].sp)) + return syscall_command_table[i].ap; + } + + return ret; +} + +static unsigned int translate_open_flags(int flags) +{ + int i; + unsigned int ret = 0; + + for (i = 0; i < (sizeof(open_flags_table) / sizeof(struct apsp_table)); + i++) { + if( (flags & open_flags_table[i].sp) ) { + ret |= open_flags_table[i].ap; + } + } + + return ret; +} + + +static void sp_setfsuidgid( uid_t uid, gid_t gid) +{ + current->fsuid = uid; + current->fsgid = gid; + + key_fsuid_changed(current); + key_fsgid_changed(current); +} + +/* + * Expects a request to be on the sysio channel. Reads it. Decides whether + * its a linux syscall and runs it, or whatever. Puts the return code back + * into the request and sends the whole thing back. + */ +void sp_work_handle_request(void) +{ + struct mtsp_syscall sc; + struct mtsp_syscall_generic generic; + struct mtsp_syscall_ret ret; + struct kspd_notifications *n; + struct timeval tv; + struct timezone tz; + int cmd; + + char *vcwd; + mm_segment_t old_fs; + int size; + + ret.retval = -1; + + if (!rtlx_read(RTLX_CHANNEL_SYSIO, &sc, sizeof(struct mtsp_syscall), 0)) { + printk(KERN_ERR "Expected request but nothing to read\n"); + return; + } + + size = sc.size; + + if (size) { + if (!rtlx_read(RTLX_CHANNEL_SYSIO, &generic, size, 0)) { + printk(KERN_ERR "Expected request but nothing to read\n"); + return; + } + } + + /* Run the syscall at the priviledge of the user who loaded the + SP program */ + + if (vpe_getuid(SP_VPE)) + sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE)); + + switch (sc.cmd) { + /* needs the flags argument translating from SDE kit to + linux */ + case MTSP_SYSCALL_PIPEFREQ: + ret.retval = cpu_khz * 1000; + ret.errno = 0; + break; + + case MTSP_SYSCALL_GETTOD: + memset(&tz, 0, sizeof(tz)); + if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv, + (int)&tz, 0,0)) == 0) + ret.retval = tv.tv_sec; + + ret.errno = errno; + break; + + case MTSP_SYSCALL_EXIT: + list_for_each_entry(n, &kspd_notifylist, list) + n->kspd_sp_exit(SP_VPE); + sp_stopping = 1; + + printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n", + generic.arg0); + break; + + case MTSP_SYSCALL_OPEN: + generic.arg1 = translate_open_flags(generic.arg1); + + vcwd = vpe_getcwd(SP_VPE); + + /* change to the cwd of the process that loaded the SP program */ + old_fs = get_fs(); + set_fs(KERNEL_DS); + sys_chdir(vcwd); + set_fs(old_fs); + + sc.cmd = __NR_open; + + /* fall through */ + + default: + if ((sc.cmd >= __NR_Linux) && + (sc.cmd <= (__NR_Linux + __NR_Linux_syscalls)) ) + cmd = sc.cmd; + else + cmd = translate_syscall_command(sc.cmd); + + if (cmd >= 0) { + ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1, + generic.arg2, generic.arg3); + ret.errno = errno; + } else + printk(KERN_WARNING + "KSPD: Unknown SP syscall number %d\n", sc.cmd); + break; + } /* switch */ + + if (vpe_getuid(SP_VPE)) + sp_setfsuidgid( 0, 0); + + if ((rtlx_write(RTLX_CHANNEL_SYSIO, &ret, sizeof(struct mtsp_syscall_ret), 0)) + < sizeof(struct mtsp_syscall_ret)) + printk("KSPD: sp_work_handle_request failed to send to SP\n"); +} + +static void sp_cleanup(void) +{ + struct files_struct *files = current->files; + int i, j; + struct fdtable *fdt; + + j = 0; + + /* + * It is safe to dereference the fd table without RCU or + * ->file_lock + */ + fdt = files_fdtable(files); + for (;;) { + unsigned long set; + i = j * __NFDBITS; + if (i >= fdt->max_fdset || i >= fdt->max_fds) + break; + set = fdt->open_fds->fds_bits[j++]; + while (set) { + if (set & 1) { + struct file * file = xchg(&fdt->fd[i], NULL); + if (file) + filp_close(file, files); + } + i++; + set >>= 1; + } + } +} + +static int channel_open = 0; + +/* the work handler */ +static void sp_work(void *data) +{ + if (!channel_open) { + if( rtlx_open(RTLX_CHANNEL_SYSIO, 1) != 0) { + printk("KSPD: unable to open sp channel\n"); + sp_stopping = 1; + } else { + channel_open++; + printk(KERN_DEBUG "KSPD: SP channel opened\n"); + } + } else { + /* wait for some data, allow it to sleep */ + rtlx_read_poll(RTLX_CHANNEL_SYSIO, 1); + + /* Check we haven't been woken because we are stopping */ + if (!sp_stopping) + sp_work_handle_request(); + } + + if (!sp_stopping) + queue_work(workqueue, &work); + else + sp_cleanup(); +} + +static void startwork(int vpe) +{ + sp_stopping = channel_open = 0; + + if (workqueue == NULL) { + if ((workqueue = create_singlethread_workqueue("kspd")) == NULL) { + printk(KERN_ERR "unable to start kspd\n"); + return; + } + + INIT_WORK(&work, sp_work, NULL); + queue_work(workqueue, &work); + } else + queue_work(workqueue, &work); + +} + +static void stopwork(int vpe) +{ + sp_stopping = 1; + + printk(KERN_DEBUG "KSPD: SP stopping\n"); +} + +void kspd_notify(struct kspd_notifications *notify) +{ + list_add(¬ify->list, &kspd_notifylist); +} + +static struct vpe_notifications notify; +static int kspd_module_init(void) +{ + INIT_LIST_HEAD(&kspd_notifylist); + + notify.start = startwork; + notify.stop = stopwork; + vpe_notify(SP_VPE, ¬ify); + + return 0; +} + +static void kspd_module_exit(void) +{ + +} + +module_init(kspd_module_init); +module_exit(kspd_module_exit); + +MODULE_DESCRIPTION("MIPS KSPD"); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 3f40c37a9ee6..a7d2bb3cf835 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -356,73 +356,13 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf, size_t count, u32 unused, u64 a4, u64 a5) { - ssize_t ret; - struct file * file; - ssize_t (*read)(struct file *, char __user *, size_t, loff_t *); - loff_t pos; - - ret = -EBADF; - file = fget(fd); - if (!file) - goto bad_file; - if (!(file->f_mode & FMODE_READ)) - goto out; - pos = merge_64(a4, a5); - ret = rw_verify_area(READ, file, &pos, count); - if (ret < 0) - goto out; - ret = -EINVAL; - if (!file->f_op || !(read = file->f_op->read)) - goto out; - if (pos < 0) - goto out; - ret = -ESPIPE; - if (!(file->f_mode & FMODE_PREAD)) - goto out; - ret = read(file, buf, count, &pos); - if (ret > 0) - dnotify_parent(file->f_dentry, DN_ACCESS); -out: - fput(file); -bad_file: - return ret; + return sys_pread64(fd, buf, count, merge_64(a4, a5)); } asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf, size_t count, u32 unused, u64 a4, u64 a5) { - ssize_t ret; - struct file * file; - ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *); - loff_t pos; - - ret = -EBADF; - file = fget(fd); - if (!file) - goto bad_file; - if (!(file->f_mode & FMODE_WRITE)) - goto out; - pos = merge_64(a4, a5); - ret = rw_verify_area(WRITE, file, &pos, count); - if (ret < 0) - goto out; - ret = -EINVAL; - if (!file->f_op || !(write = file->f_op->write)) - goto out; - if (pos < 0) - goto out; - - ret = -ESPIPE; - if (!(file->f_mode & FMODE_PWRITE)) - goto out; - - ret = write(file, buf, count, &pos); - if (ret > 0) - dnotify_parent(file->f_dentry, DN_MODIFY); -out: - fput(file); -bad_file: - return ret; + return sys_pwrite64(fd, buf, count, merge_64(a4, a5)); } asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, @@ -1182,6 +1122,16 @@ asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3, return sys_readahead(fd, merge_64(a2, a3), count); } +asmlinkage long sys32_sync_file_range(int fd, int __pad, + unsigned long a2, unsigned long a3, + unsigned long a4, unsigned long a5, + int flags) +{ + return sys_sync_file_range(fd, + merge_64(a2, a3), merge_64(a4, a5), + flags); +} + /* Argument list sizes for sys_socketcall */ #define AL(x) ((x) * sizeof(unsigned int)) static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3), diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c new file mode 100644 index 000000000000..02237a685ec7 --- /dev/null +++ b/arch/mips/kernel/mips-mt.c @@ -0,0 +1,449 @@ +/* + * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels + * Copyright (C) 2005 Mips Technologies, Inc + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> + +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#include <asm/mipsmtregs.h> +#include <asm/r4kcache.h> +#include <asm/cacheflush.h> + +/* + * CPU mask used to set process affinity for MT VPEs/TCs with FPUs + */ + +cpumask_t mt_fpu_cpumask; + +#ifdef CONFIG_MIPS_MT_FPAFF + +#include <linux/cpu.h> +#include <linux/delay.h> +#include <asm/uaccess.h> + +unsigned long mt_fpemul_threshold = 0; + +/* + * Replacement functions for the sys_sched_setaffinity() and + * sys_sched_getaffinity() system calls, so that we can integrate + * FPU affinity with the user's requested processor affinity. + * This code is 98% identical with the sys_sched_setaffinity() + * and sys_sched_getaffinity() system calls, and should be + * updated when kernel/sched.c changes. + */ + +/* + * find_process_by_pid - find a process with a matching PID value. + * used in sys_sched_set/getaffinity() in kernel/sched.c, so + * cloned here. + */ +static inline task_t *find_process_by_pid(pid_t pid) +{ + return pid ? find_task_by_pid(pid) : current; +} + + +/* + * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + cpumask_t new_mask; + cpumask_t effective_mask; + int retval; + task_t *p; + + if (len < sizeof(new_mask)) + return -EINVAL; + + if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask))) + return -EFAULT; + + lock_cpu_hotplug(); + read_lock(&tasklist_lock); + + p = find_process_by_pid(pid); + if (!p) { + read_unlock(&tasklist_lock); + unlock_cpu_hotplug(); + return -ESRCH; + } + + /* + * It is not safe to call set_cpus_allowed with the + * tasklist_lock held. We will bump the task_struct's + * usage count and drop tasklist_lock before invoking + * set_cpus_allowed. + */ + get_task_struct(p); + + retval = -EPERM; + if ((current->euid != p->euid) && (current->euid != p->uid) && + !capable(CAP_SYS_NICE)) { + read_unlock(&tasklist_lock); + goto out_unlock; + } + + /* Record new user-specified CPU set for future reference */ + p->thread.user_cpus_allowed = new_mask; + + /* Unlock the task list */ + read_unlock(&tasklist_lock); + + /* Compute new global allowed CPU set if necessary */ + if( (p->thread.mflags & MF_FPUBOUND) + && cpus_intersects(new_mask, mt_fpu_cpumask)) { + cpus_and(effective_mask, new_mask, mt_fpu_cpumask); + retval = set_cpus_allowed(p, effective_mask); + } else { + p->thread.mflags &= ~MF_FPUBOUND; + retval = set_cpus_allowed(p, new_mask); + } + + +out_unlock: + put_task_struct(p); + unlock_cpu_hotplug(); + return retval; +} + +/* + * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + unsigned int real_len; + cpumask_t mask; + int retval; + task_t *p; + + real_len = sizeof(mask); + if (len < real_len) + return -EINVAL; + + lock_cpu_hotplug(); + read_lock(&tasklist_lock); + + retval = -ESRCH; + p = find_process_by_pid(pid); + if (!p) + goto out_unlock; + + retval = 0; + + cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map); + +out_unlock: + read_unlock(&tasklist_lock); + unlock_cpu_hotplug(); + if (retval) + return retval; + if (copy_to_user(user_mask_ptr, &mask, real_len)) + return -EFAULT; + return real_len; +} + +#endif /* CONFIG_MIPS_MT_FPAFF */ + +/* + * Dump new MIPS MT state for the core. Does not leave TCs halted. + * Takes an argument which taken to be a pre-call MVPControl value. + */ + +void mips_mt_regdump(unsigned long mvpctl) +{ + unsigned long flags; + unsigned long vpflags; + unsigned long mvpconf0; + int nvpe; + int ntc; + int i; + int tc; + unsigned long haltval; + unsigned long tcstatval; +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_soft_dump(void); +#endif /* CONFIG_MIPT_MT_SMTC */ + + local_irq_save(flags); + vpflags = dvpe(); + printk("=== MIPS MT State Dump ===\n"); + printk("-- Global State --\n"); + printk(" MVPControl Passed: %08lx\n", mvpctl); + printk(" MVPControl Read: %08lx\n", vpflags); + printk(" MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0())); + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + printk("-- per-VPE State --\n"); + for(i = 0; i < nvpe; i++) { + for(tc = 0; tc < ntc; tc++) { + settc(tc); + if((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) { + printk(" VPE %d\n", i); + printk(" VPEControl : %08lx\n", read_vpe_c0_vpecontrol()); + printk(" VPEConf0 : %08lx\n", read_vpe_c0_vpeconf0()); + printk(" VPE%d.Status : %08lx\n", + i, read_vpe_c0_status()); + printk(" VPE%d.EPC : %08lx\n", i, read_vpe_c0_epc()); + printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause()); + printk(" VPE%d.Config7 : %08lx\n", + i, read_vpe_c0_config7()); + break; /* Next VPE */ + } + } + } + printk("-- per-TC State --\n"); + for(tc = 0; tc < ntc; tc++) { + settc(tc); + if(read_tc_c0_tcbind() == read_c0_tcbind()) { + /* Are we dumping ourself? */ + haltval = 0; /* Then we're not halted, and mustn't be */ + tcstatval = flags; /* And pre-dump TCStatus is flags */ + printk(" TC %d (current TC with VPE EPC above)\n", tc); + } else { + haltval = read_tc_c0_tchalt(); + write_tc_c0_tchalt(1); + tcstatval = read_tc_c0_tcstatus(); + printk(" TC %d\n", tc); + } + printk(" TCStatus : %08lx\n", tcstatval); + printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); + printk(" TCRestart : %08lx\n", read_tc_c0_tcrestart()); + printk(" TCHalt : %08lx\n", haltval); + printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); + if (!haltval) + write_tc_c0_tchalt(0); + } +#ifdef CONFIG_MIPS_MT_SMTC + smtc_soft_dump(); +#endif /* CONFIG_MIPT_MT_SMTC */ + printk("===========================\n"); + evpe(vpflags); + local_irq_restore(flags); +} + +static int mt_opt_norps = 0; +static int mt_opt_rpsctl = -1; +static int mt_opt_nblsu = -1; +static int mt_opt_forceconfig7 = 0; +static int mt_opt_config7 = -1; + +static int __init rps_disable(char *s) +{ + mt_opt_norps = 1; + return 1; +} +__setup("norps", rps_disable); + +static int __init rpsctl_set(char *str) +{ + get_option(&str, &mt_opt_rpsctl); + return 1; +} +__setup("rpsctl=", rpsctl_set); + +static int __init nblsu_set(char *str) +{ + get_option(&str, &mt_opt_nblsu); + return 1; +} +__setup("nblsu=", nblsu_set); + +static int __init config7_set(char *str) +{ + get_option(&str, &mt_opt_config7); + mt_opt_forceconfig7 = 1; + return 1; +} +__setup("config7=", config7_set); + +/* Experimental cache flush control parameters that should go away some day */ +int mt_protiflush = 0; +int mt_protdflush = 0; +int mt_n_iflushes = 1; +int mt_n_dflushes = 1; + +static int __init set_protiflush(char *s) +{ + mt_protiflush = 1; + return 1; +} +__setup("protiflush", set_protiflush); + +static int __init set_protdflush(char *s) +{ + mt_protdflush = 1; + return 1; +} +__setup("protdflush", set_protdflush); + +static int __init niflush(char *s) +{ + get_option(&s, &mt_n_iflushes); + return 1; +} +__setup("niflush=", niflush); + +static int __init ndflush(char *s) +{ + get_option(&s, &mt_n_dflushes); + return 1; +} +__setup("ndflush=", ndflush); +#ifdef CONFIG_MIPS_MT_FPAFF +static int fpaff_threshold = -1; + +static int __init fpaff_thresh(char *str) +{ + get_option(&str, &fpaff_threshold); + return 1; +} + +__setup("fpaff=", fpaff_thresh); +#endif /* CONFIG_MIPS_MT_FPAFF */ + +static unsigned int itc_base = 0; + +static int __init set_itc_base(char *str) +{ + get_option(&str, &itc_base); + return 1; +} + +__setup("itcbase=", set_itc_base); + +void mips_mt_set_cpuoptions(void) +{ + unsigned int oconfig7 = read_c0_config7(); + unsigned int nconfig7 = oconfig7; + + if (mt_opt_norps) { + printk("\"norps\" option deprectated: use \"rpsctl=\"\n"); + } + if (mt_opt_rpsctl >= 0) { + printk("34K return prediction stack override set to %d.\n", + mt_opt_rpsctl); + if (mt_opt_rpsctl) + nconfig7 |= (1 << 2); + else + nconfig7 &= ~(1 << 2); + } + if (mt_opt_nblsu >= 0) { + printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu); + if (mt_opt_nblsu) + nconfig7 |= (1 << 5); + else + nconfig7 &= ~(1 << 5); + } + if (mt_opt_forceconfig7) { + printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7); + nconfig7 = mt_opt_config7; + } + if (oconfig7 != nconfig7) { + __asm__ __volatile("sync"); + write_c0_config7(nconfig7); + ehb (); + printk("Config7: 0x%08x\n", read_c0_config7()); + } + + /* Report Cache management debug options */ + if (mt_protiflush) + printk("I-cache flushes single-threaded\n"); + if (mt_protdflush) + printk("D-cache flushes single-threaded\n"); + if (mt_n_iflushes != 1) + printk("I-Cache Flushes Repeated %d times\n", mt_n_iflushes); + if (mt_n_dflushes != 1) + printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* FPU Use Factor empirically derived from experiments on 34K */ +#define FPUSEFACTOR 333 + + if (fpaff_threshold >= 0) { + mt_fpemul_threshold = fpaff_threshold; + } else { + mt_fpemul_threshold = + (FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ; + } + printk("FPU Affinity set after %ld emulations\n", + mt_fpemul_threshold); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + if (itc_base != 0) { + /* + * Configure ITC mapping. This code is very + * specific to the 34K core family, which uses + * a special mode bit ("ITC") in the ErrCtl + * register to enable access to ITC control + * registers via cache "tag" operations. + */ + unsigned long ectlval; + unsigned long itcblkgrn; + + /* ErrCtl register is known as "ecc" to Linux */ + ectlval = read_c0_ecc(); + write_c0_ecc(ectlval | (0x1 << 26)); + ehb(); +#define INDEX_0 (0x80000000) +#define INDEX_8 (0x80000008) + /* Read "cache tag" for Dcache pseudo-index 8 */ + cache_op(Index_Load_Tag_D, INDEX_8); + ehb(); + itcblkgrn = read_c0_dtaglo(); + itcblkgrn &= 0xfffe0000; + /* Set for 128 byte pitch of ITC cells */ + itcblkgrn |= 0x00000c00; + /* Stage in Tag register */ + write_c0_dtaglo(itcblkgrn); + ehb(); + /* Write out to ITU with CACHE op */ + cache_op(Index_Store_Tag_D, INDEX_8); + /* Now set base address, and turn ITC on with 0x1 bit */ + write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 ); + ehb(); + /* Write out to ITU with CACHE op */ + cache_op(Index_Store_Tag_D, INDEX_0); + write_c0_ecc(ectlval); + ehb(); + printk("Mapped %ld ITC cells starting at 0x%08x\n", + ((itcblkgrn & 0x7fe00000) >> 20), itc_base); + } +} + +/* + * Function to protect cache flushes from concurrent execution + * depends on MP software model chosen. + */ + +void mt_cflush_lockdown(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_cflush_lockdown(void); + + smtc_cflush_lockdown(); +#endif /* CONFIG_MIPS_MT_SMTC */ + /* FILL IN VSMP and AP/SP VERSIONS HERE */ +} + +void mt_cflush_release(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_cflush_release(void); + + smtc_cflush_release(); +#endif /* CONFIG_MIPS_MT_SMTC */ + /* FILL IN VSMP and AP/SP VERSIONS HERE */ +} diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index e042f9d2ba31..0a71a4c33716 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -28,21 +28,9 @@ extern long __strnlen_user_asm(const char *s); /* * String functions */ -EXPORT_SYMBOL(memchr); -EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strchr); -#ifdef CONFIG_64BIT -EXPORT_SYMBOL(strncmp); -#endif -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(kernel_thread); @@ -61,6 +49,3 @@ EXPORT_SYMBOL(__strnlen_user_asm); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(invalid_pte_table); -#ifdef CONFIG_GENERIC_IRQ_PROBE -EXPORT_SYMBOL(probe_irq_mask); -#endif diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index e54a7f442f8a..d7bf0215bc1d 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -288,6 +288,9 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, sym = (Elf_Sym *)sechdrs[symindex].sh_addr + ELF_MIPS_R_SYM(rel[i]); if (!sym->st_value) { + /* Ignore unresolved weak symbol */ + if (ELF_ST_BIND(sym->st_info) == STB_WEAK) + continue; printk(KERN_WARNING "%s: Unknown symbol %s\n", me->name, strtab + sym->st_name); return -ENOENT; @@ -325,6 +328,9 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, sym = (Elf_Sym *)sechdrs[symindex].sh_addr + ELF_MIPS_R_SYM(rel[i]); if (!sym->st_value) { + /* Ignore unresolved weak symbol */ + if (ELF_ST_BIND(sym->st_info) == STB_WEAK) + continue; printk(KERN_WARNING "%s: Unknown symbol %s\n", me->name, strtab + sym->st_name); return -ENOENT; diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 84ab959f924a..9def554f335b 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -42,6 +42,7 @@ static const char *cpu_name[] = { [CPU_R8000] = "R8000", [CPU_R10000] = "R10000", [CPU_R12000] = "R12000", + [CPU_R14000] = "R14000", [CPU_R4300] = "R4300", [CPU_R4650] = "R4650", [CPU_R4700] = "R4700", @@ -74,6 +75,7 @@ static const char *cpu_name[] = { [CPU_24K] = "MIPS 24K", [CPU_25KF] = "MIPS 25Kf", [CPU_34K] = "MIPS 34K", + [CPU_74K] = "MIPS 74K", [CPU_VR4111] = "NEC VR4111", [CPU_VR4121] = "NEC VR4121", [CPU_VR4122] = "NEC VR4122", diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index c66db5e5ab62..199a06e873c6 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -41,6 +41,10 @@ #include <asm/elf.h> #include <asm/isadep.h> #include <asm/inst.h> +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/mipsmtregs.h> +extern void smtc_idle_loop_hook(void); +#endif /* CONFIG_MIPS_MT_SMTC */ /* * The idle thread. There's no useful work to be done, so just try to conserve @@ -51,9 +55,13 @@ ATTRIB_NORET void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - while (!need_resched()) + while (!need_resched()) { +#ifdef CONFIG_MIPS_MT_SMTC + smtc_idle_loop_hook(); +#endif /* CONFIG_MIPS_MT_SMTC */ if (cpu_wait) (*cpu_wait)(); + } preempt_enable_no_resched(); schedule(); preempt_disable(); @@ -177,6 +185,17 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); clear_tsk_thread_flag(p, TIF_USEDFPU); +#ifdef CONFIG_MIPS_MT_FPAFF + /* + * FPU affinity support is cleaner if we track the + * user-visible CPU affinity from the very beginning. + * The generic cpus_allowed mask will already have + * been copied from the parent before copy_thread + * is invoked. + */ + p->thread.user_cpus_allowed = p->cpus_allowed; +#endif /* CONFIG_MIPS_MT_FPAFF */ + if (clone_flags & CLONE_SETTLS) ti->tp_value = regs->regs[7]; diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index f838b36cc765..9b4733c12395 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -248,10 +248,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case FPC_EIR: { /* implementation / version register */ unsigned int flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned int irqflags; + unsigned int mtflags; +#endif /* CONFIG_MIPS_MT_SMTC */ if (!cpu_has_fpu) break; +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify-write of Status must be atomic */ + local_irq_save(irqflags); + mtflags = dmt(); +#endif /* CONFIG_MIPS_MT_SMTC */ + preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); @@ -266,6 +276,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); write_c0_status(flags); } +#ifdef CONFIG_MIPS_MT_SMTC + emt(mtflags); + local_irq_restore(irqflags); +#endif /* CONFIG_MIPS_MT_SMTC */ preempt_enable(); break; } @@ -469,7 +483,7 @@ static inline int audit_arch(void) asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) { if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]), + audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]), regs->regs[2]); if (!(current->ptrace & PT_PTRACED)) @@ -493,7 +507,7 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) } out: if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(current, audit_arch(), regs->regs[2], + audit_syscall_entry(audit_arch(), regs->regs[2], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); } diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index 0d5cf97af727..8704dc0496ea 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -173,12 +173,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) break; case FPC_EIR: { /* implementation / version register */ unsigned int flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned int irqflags; + unsigned int mtflags; +#endif /* CONFIG_MIPS_MT_SMTC */ if (!cpu_has_fpu) { tmp = 0; break; } +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify-write of Status must be atomic */ + local_irq_save(irqflags); + mtflags = dmt(); +#endif /* CONFIG_MIPS_MT_SMTC */ + preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); @@ -193,6 +203,10 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); write_c0_status(flags); } +#ifdef CONFIG_MIPS_MT_SMTC + emt(mtflags); + local_irq_restore(irqflags); +#endif /* CONFIG_MIPS_MT_SMTC */ preempt_enable(); break; } diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index d2afbd19a9c8..0b1b54acee9f 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -88,7 +88,18 @@ PTR_ADDIU t0, $28, _THREAD_SIZE - 32 set_saved_sp t0, t1, t2 - +#ifdef CONFIG_MIPS_MT_SMTC + /* Read-modify-writes of Status must be atomic on a VPE */ + mfc0 t2, CP0_TCSTATUS + ori t1, t2, TCSTATUS_IXMT + mtc0 t1, CP0_TCSTATUS + andi t2, t2, TCSTATUS_IXMT + ehb + DMT 8 # dmt t0 + move t1,ra + jal mips_ihb + move ra,t1 +#endif /* CONFIG_MIPS_MT_SMTC */ mfc0 t1, CP0_STATUS /* Do we really need this? */ li a3, 0xff01 and t1, a3 @@ -97,6 +108,18 @@ and a2, a3 or a2, t1 mtc0 a2, CP0_STATUS +#ifdef CONFIG_MIPS_MT_SMTC + ehb + andi t0, t0, VPECONTROL_TE + beqz t0, 1f + emt +1: + mfc0 t1, CP0_TCSTATUS + xori t1, t1, TCSTATUS_IXMT + or t1, t1, t2 + mtc0 t1, CP0_TCSTATUS + ehb +#endif /* CONFIG_MIPS_MT_SMTC */ move v0, a0 jr ra END(resume) @@ -131,10 +154,19 @@ LEAF(_restore_fp) #define FPU_DEFAULT 0x00000000 LEAF(_init_fpu) +#ifdef CONFIG_MIPS_MT_SMTC + /* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */ + mfc0 t0, CP0_TCSTATUS + /* Bit position is the same for Status, TCStatus */ + li t1, ST0_CU1 + or t0, t1 + mtc0 t0, CP0_TCSTATUS +#else /* Normal MIPS CU1 enable */ mfc0 t0, CP0_STATUS li t1, ST0_CU1 or t0, t1 mtc0 t0, CP0_STATUS +#endif /* CONFIG_MIPS_MT_SMTC */ fpu_enable_hazard li t1, FPU_DEFAULT diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 986a9cf23067..caf777f83289 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -21,45 +21,44 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/init.h> +#include <asm/uaccess.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/vmalloc.h> +#include <linux/elf.h> +#include <linux/seq_file.h> +#include <linux/syscalls.h> +#include <linux/moduleloader.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/wait.h> - #include <asm/mipsmtregs.h> -#include <asm/bitops.h> +#include <asm/cacheflush.h> +#include <asm/atomic.h> #include <asm/cpu.h> #include <asm/processor.h> +#include <asm/system.h> +#include <asm/vpe.h> #include <asm/rtlx.h> -#include <asm/uaccess.h> #define RTLX_TARG_VPE 1 static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; -static struct irqaction irq; -static int irq_num; - -static inline int spacefree(int read, int write, int size) -{ - if (read == write) { - /* - * never fill the buffer completely, so indexes are always - * equal if empty and only empty, or !equal if data available - */ - return size - 1; - } - - return ((read + size - write) % size) - 1; -} static struct chan_waitqueues { wait_queue_head_t rt_queue; wait_queue_head_t lx_queue; + int in_open; } channel_wqs[RTLX_CHANNELS]; +static struct irqaction irq; +static int irq_num; +static struct vpe_notifications notify; +static int sp_stopping = 0; + extern void *vpe_get_shared(int index); static void rtlx_dispatch(struct pt_regs *regs) @@ -67,174 +66,298 @@ static void rtlx_dispatch(struct pt_regs *regs) do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); } + +/* Interrupt handler may be called before rtlx_init has otherwise had + a chance to run. +*/ static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int i; for (i = 0; i < RTLX_CHANNELS; i++) { - struct rtlx_channel *chan = &rtlx->channel[i]; - - if (chan->lx_read != chan->lx_write) - wake_up_interruptible(&channel_wqs[i].lx_queue); + wake_up(&channel_wqs[i].lx_queue); + wake_up(&channel_wqs[i].rt_queue); } return IRQ_HANDLED; } -/* call when we have the address of the shared structure from the SP side. */ -static int rtlx_init(struct rtlx_info *rtlxi) +static __attribute_used__ void dump_rtlx(void) { int i; - if (rtlxi->id != RTLX_ID) { - printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); - return -ENOEXEC; - } + printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); - /* initialise the wait queues */ for (i = 0; i < RTLX_CHANNELS; i++) { - init_waitqueue_head(&channel_wqs[i].rt_queue); - init_waitqueue_head(&channel_wqs[i].lx_queue); - } + struct rtlx_channel *chan = &rtlx->channel[i]; - /* set up for interrupt handling */ - memset(&irq, 0, sizeof(struct irqaction)); + printk(" rt_state %d lx_state %d buffer_size %d\n", + chan->rt_state, chan->lx_state, chan->buffer_size); - if (cpu_has_vint) - set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); + printk(" rt_read %d rt_write %d\n", + chan->rt_read, chan->rt_write); + + printk(" lx_read %d lx_write %d\n", + chan->lx_read, chan->lx_write); - irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; - irq.handler = rtlx_interrupt; - irq.flags = SA_INTERRUPT; - irq.name = "RTLX"; - irq.dev_id = rtlx; - setup_irq(irq_num, &irq); + printk(" rt_buffer <%s>\n", chan->rt_buffer); + printk(" lx_buffer <%s>\n", chan->lx_buffer); + } +} + +/* call when we have the address of the shared structure from the SP side. */ +static int rtlx_init(struct rtlx_info *rtlxi) +{ + if (rtlxi->id != RTLX_ID) { + printk(KERN_ERR "no valid RTLX id at 0x%p 0x%x\n", rtlxi, rtlxi->id); + return -ENOEXEC; + } rtlx = rtlxi; return 0; } -/* only allow one open process at a time to open each channel */ -static int rtlx_open(struct inode *inode, struct file *filp) +/* notifications */ +static void starting(int vpe) +{ + int i; + sp_stopping = 0; + + /* force a reload of rtlx */ + rtlx=NULL; + + /* wake up any sleeping rtlx_open's */ + for (i = 0; i < RTLX_CHANNELS; i++) + wake_up_interruptible(&channel_wqs[i].lx_queue); +} + +static void stopping(int vpe) { - int minor, ret; + int i; + + sp_stopping = 1; + for (i = 0; i < RTLX_CHANNELS; i++) + wake_up_interruptible(&channel_wqs[i].lx_queue); +} + + +int rtlx_open(int index, int can_sleep) +{ + int ret; struct rtlx_channel *chan; + volatile struct rtlx_info **p; - /* assume only 1 device at the mo. */ - minor = MINOR(inode->i_rdev); + if (index >= RTLX_CHANNELS) { + printk(KERN_DEBUG "rtlx_open index out of range\n"); + return -ENOSYS; + } + + if (channel_wqs[index].in_open) { + printk(KERN_DEBUG "rtlx_open channel %d already opened\n", index); + return -EBUSY; + } + + channel_wqs[index].in_open++; if (rtlx == NULL) { - struct rtlx_info **p; if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { - printk(KERN_ERR "vpe_get_shared is NULL. " - "Has an SP program been loaded?\n"); - return -EFAULT; + if (can_sleep) { + DECLARE_WAITQUEUE(wait, current); + + /* go to sleep */ + add_wait_queue(&channel_wqs[index].lx_queue, &wait); + + set_current_state(TASK_INTERRUPTIBLE); + while ((p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + + /* back running */ + } else { + printk( KERN_DEBUG "No SP program loaded, and device " + "opened with O_NONBLOCK\n"); + channel_wqs[index].in_open = 0; + return -ENOSYS; + } } if (*p == NULL) { - printk(KERN_ERR "vpe_shared %p %p\n", p, *p); - return -EFAULT; + if (can_sleep) { + DECLARE_WAITQUEUE(wait, current); + + /* go to sleep */ + add_wait_queue(&channel_wqs[index].lx_queue, &wait); + + set_current_state(TASK_INTERRUPTIBLE); + while (*p == NULL) { + schedule(); + + /* reset task state to interruptable otherwise + we'll whizz round here like a very fast loopy + thing. schedule() appears to return with state + set to TASK_RUNNING. + + If the loaded SP program, for whatever reason, + doesn't set up the shared structure *p will never + become true. So whoever connected to either /dev/rt? + or if it was kspd, will then take up rather a lot of + processor cycles. + */ + + set_current_state(TASK_INTERRUPTIBLE); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + + /* back running */ + } + else { + printk(" *vpe_get_shared is NULL. " + "Has an SP program been loaded?\n"); + channel_wqs[index].in_open = 0; + return -ENOSYS; + } } - if ((ret = rtlx_init(*p)) < 0) - return ret; + if ((unsigned int)*p < KSEG0) { + printk(KERN_WARNING "vpe_get_shared returned an invalid pointer " + "maybe an error code %d\n", (int)*p); + channel_wqs[index].in_open = 0; + return -ENOSYS; + } + + if ((ret = rtlx_init(*p)) < 0) { + channel_wqs[index].in_open = 0; + return ret; + } } - chan = &rtlx->channel[minor]; + chan = &rtlx->channel[index]; - if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state)) - return -EBUSY; + if (chan->lx_state == RTLX_STATE_OPENED) { + channel_wqs[index].in_open = 0; + return -EBUSY; + } + chan->lx_state = RTLX_STATE_OPENED; + channel_wqs[index].in_open = 0; return 0; } -static int rtlx_release(struct inode *inode, struct file *filp) +int rtlx_release(int index) { - int minor = MINOR(inode->i_rdev); - - clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state); - smp_mb__after_clear_bit(); - + rtlx->channel[index].lx_state = RTLX_STATE_UNUSED; return 0; } -static unsigned int rtlx_poll(struct file *file, poll_table * wait) +unsigned int rtlx_read_poll(int index, int can_sleep) { - int minor; - unsigned int mask = 0; - struct rtlx_channel *chan; + struct rtlx_channel *chan; - minor = MINOR(file->f_dentry->d_inode->i_rdev); - chan = &rtlx->channel[minor]; + if (rtlx == NULL) + return 0; - poll_wait(file, &channel_wqs[minor].rt_queue, wait); - poll_wait(file, &channel_wqs[minor].lx_queue, wait); + chan = &rtlx->channel[index]; /* data available to read? */ - if (chan->lx_read != chan->lx_write) - mask |= POLLIN | POLLRDNORM; + if (chan->lx_read == chan->lx_write) { + if (can_sleep) { + DECLARE_WAITQUEUE(wait, current); - /* space to write */ - if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) - mask |= POLLOUT | POLLWRNORM; + /* go to sleep */ + add_wait_queue(&channel_wqs[index].lx_queue, &wait); - return mask; + set_current_state(TASK_INTERRUPTIBLE); + while (chan->lx_read == chan->lx_write) { + schedule(); + + set_current_state(TASK_INTERRUPTIBLE); + + if (sp_stopping) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + return 0; + } + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[index].lx_queue, &wait); + + /* back running */ + } + else + return 0; + } + + return (chan->lx_write + chan->buffer_size - chan->lx_read) + % chan->buffer_size; } -static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, - loff_t * ppos) +static inline int write_spacefree(int read, int write, int size) { - unsigned long failed; - size_t fl = 0L; - int minor; - struct rtlx_channel *lx; - DECLARE_WAITQUEUE(wait, current); + if (read == write) { + /* + * Never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } - minor = MINOR(file->f_dentry->d_inode->i_rdev); - lx = &rtlx->channel[minor]; + return ((read + size - write) % size) - 1; +} - /* data available? */ - if (lx->lx_write == lx->lx_read) { - if (file->f_flags & O_NONBLOCK) - return 0; /* -EAGAIN makes cat whinge */ +unsigned int rtlx_write_poll(int index) +{ + struct rtlx_channel *chan = &rtlx->channel[index]; + return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size); +} - /* go to sleep */ - add_wait_queue(&channel_wqs[minor].lx_queue, &wait); - set_current_state(TASK_INTERRUPTIBLE); +static inline void copy_to(void *dst, void *src, size_t count, int user) +{ + if (user) + copy_to_user(dst, src, count); + else + memcpy(dst, src, count); +} - while (lx->lx_write == lx->lx_read) - schedule(); +static inline void copy_from(void *dst, void *src, size_t count, int user) +{ + if (user) + copy_from_user(dst, src, count); + else + memcpy(dst, src, count); +} - set_current_state(TASK_RUNNING); - remove_wait_queue(&channel_wqs[minor].lx_queue, &wait); +ssize_t rtlx_read(int index, void *buff, size_t count, int user) +{ + size_t fl = 0L; + struct rtlx_channel *lx; - /* back running */ - } + if (rtlx == NULL) + return -ENOSYS; + + lx = &rtlx->channel[index]; /* find out how much in total */ count = min(count, - (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) + % lx->buffer_size); /* then how much from the read pointer onwards */ - fl = min(count, (size_t)lx->buffer_size - lx->lx_read); + fl = min( count, (size_t)lx->buffer_size - lx->lx_read); - failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); - if (failed) { - count = fl - failed; - goto out; - } + copy_to(buff, &lx->lx_buffer[lx->lx_read], fl, user); /* and if there is anything left at the beginning of the buffer */ - if (count - fl) { - failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl); - if (failed) { - count -= failed; - goto out; - } - } + if ( count - fl ) + copy_to (buff + fl, lx->lx_buffer, count - fl, user); -out: /* update the index */ lx->lx_read += count; lx->lx_read %= lx->buffer_size; @@ -242,20 +365,100 @@ out: return count; } -static ssize_t rtlx_write(struct file *file, const char __user * buffer, +ssize_t rtlx_write(int index, void *buffer, size_t count, int user) +{ + struct rtlx_channel *rt; + size_t fl; + + if (rtlx == NULL) + return(-ENOSYS); + + rt = &rtlx->channel[index]; + + /* total number of bytes to copy */ + count = min(count, + (size_t)write_spacefree(rt->rt_read, rt->rt_write, + rt->buffer_size)); + + /* first bit from write pointer to the end of the buffer, or count */ + fl = min(count, (size_t) rt->buffer_size - rt->rt_write); + + copy_from (&rt->rt_buffer[rt->rt_write], buffer, fl, user); + + /* if there's any left copy to the beginning of the buffer */ + if( count - fl ) + copy_from (rt->rt_buffer, buffer + fl, count - fl, user); + + rt->rt_write += count; + rt->rt_write %= rt->buffer_size; + + return(count); +} + + +static int file_open(struct inode *inode, struct file *filp) +{ + int minor = iminor(inode); + + return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); +} + +static int file_release(struct inode *inode, struct file *filp) +{ + int minor = iminor(inode); + + return rtlx_release(minor); +} + +static unsigned int file_poll(struct file *file, poll_table * wait) +{ + int minor; + unsigned int mask = 0; + + minor = iminor(file->f_dentry->d_inode); + + poll_wait(file, &channel_wqs[minor].rt_queue, wait); + poll_wait(file, &channel_wqs[minor].lx_queue, wait); + + if (rtlx == NULL) + return 0; + + /* data available to read? */ + if (rtlx_read_poll(minor, 0)) + mask |= POLLIN | POLLRDNORM; + + /* space to write */ + if (rtlx_write_poll(minor)) + mask |= POLLOUT | POLLWRNORM; + + return mask; +} + +static ssize_t file_read(struct file *file, char __user * buffer, size_t count, + loff_t * ppos) +{ + int minor = iminor(file->f_dentry->d_inode); + + /* data available? */ + if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) { + return 0; // -EAGAIN makes cat whinge + } + + return rtlx_read(minor, buffer, count, 1); +} + +static ssize_t file_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { - unsigned long failed; int minor; struct rtlx_channel *rt; - size_t fl; DECLARE_WAITQUEUE(wait, current); - minor = MINOR(file->f_dentry->d_inode->i_rdev); + minor = iminor(file->f_dentry->d_inode); rt = &rtlx->channel[minor]; /* any space left... */ - if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { + if (!rtlx_write_poll(minor)) { if (file->f_flags & O_NONBLOCK) return -EAGAIN; @@ -263,61 +466,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, add_wait_queue(&channel_wqs[minor].rt_queue, &wait); set_current_state(TASK_INTERRUPTIBLE); - while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) + while (!rtlx_write_poll(minor)) schedule(); set_current_state(TASK_RUNNING); remove_wait_queue(&channel_wqs[minor].rt_queue, &wait); } - /* total number of bytes to copy */ - count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); - - /* first bit from write pointer to the end of the buffer, or count */ - fl = min(count, (size_t) rt->buffer_size - rt->rt_write); - - failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); - if (failed) { - count = fl - failed; - goto out; - } - - /* if there's any left copy to the beginning of the buffer */ - if (count - fl) { - failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); - if (failed) { - count -= failed; - goto out; - } - } - -out: - rt->rt_write += count; - rt->rt_write %= rt->buffer_size; - - return count; + return rtlx_write(minor, (void *)buffer, count, 1); } static struct file_operations rtlx_fops = { - .owner = THIS_MODULE, - .open = rtlx_open, - .release = rtlx_release, - .write = rtlx_write, - .read = rtlx_read, - .poll = rtlx_poll + .owner = THIS_MODULE, + .open = file_open, + .release = file_release, + .write = file_write, + .read = file_read, + .poll = file_poll +}; + +static struct irqaction rtlx_irq = { + .handler = rtlx_interrupt, + .flags = SA_INTERRUPT, + .name = "RTLX", }; +static int rtlx_irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; + static char register_chrdev_failed[] __initdata = KERN_ERR "rtlx_module_init: unable to register device\n"; -static int __init rtlx_module_init(void) +static int rtlx_module_init(void) { + int i; + major = register_chrdev(0, module_name, &rtlx_fops); if (major < 0) { printk(register_chrdev_failed); return major; } + /* initialise the wait queues */ + for (i = 0; i < RTLX_CHANNELS; i++) { + init_waitqueue_head(&channel_wqs[i].rt_queue); + init_waitqueue_head(&channel_wqs[i].lx_queue); + channel_wqs[i].in_open = 0; + } + + /* set up notifiers */ + notify.start = starting; + notify.stop = stopping; + vpe_notify(RTLX_TARG_VPE, ¬ify); + + if (cpu_has_vint) + set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); + + rtlx_irq.dev_id = rtlx; + setup_irq(rtlx_irq_num, &rtlx_irq); + return 0; } @@ -330,5 +536,5 @@ module_init(rtlx_module_init); module_exit(rtlx_module_exit); MODULE_DESCRIPTION("MIPS RTLX"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc."); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 2f2dc54b2e26..a0ac0e5f61ad 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -569,8 +569,19 @@ einval: li v0, -EINVAL sys sys_tkill 2 sys sys_sendfile64 5 sys sys_futex 6 +#ifdef CONFIG_MIPS_MT_FPAFF + /* + * For FPU affinity scheduling on MIPS MT processors, we need to + * intercept sys_sched_xxxaffinity() calls until we get a proper hook + * in kernel/sched.c. Considered only temporary we only support these + * hooks for the 32-bit kernel - there is no MIPS64 MT processor atm. + */ + sys mipsmt_sys_sched_setaffinity 3 + sys mipsmt_sys_sched_getaffinity 3 +#else sys sys_sched_setaffinity 3 sys sys_sched_getaffinity 3 /* 4240 */ +#endif /* CONFIG_MIPS_MT_FPAFF */ sys sys_io_setup 2 sys sys_io_destroy 1 sys sys_io_getevents 5 @@ -634,6 +645,8 @@ einval: li v0, -EINVAL sys sys_pselect6 6 sys sys_ppoll 5 sys sys_unshare 1 + sys sys_splice 4 + sys sys_sync_file_range 7 /* 4305 */ .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 98bf25df56f3..9ba750887377 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -460,3 +460,5 @@ sys_call_table: PTR sys_pselect6 /* 5260 */ PTR sys_ppoll PTR sys_unshare + PTR sys_splice + PTR sys_sync_file_range diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 05a2c0567dae..942aca26f9c4 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -386,3 +386,5 @@ EXPORT(sysn32_call_table) PTR sys_pselect6 PTR sys_ppoll /* 6265 */ PTR sys_unshare + PTR sys_splice + PTR sys_sync_file_range diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 19c4ca481b02..8efb23a84131 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -209,7 +209,7 @@ sys_call_table: PTR sys_fork PTR sys_read PTR sys_write - PTR sys_open /* 4005 */ + PTR compat_sys_open /* 4005 */ PTR sys_close PTR sys_waitpid PTR sys_creat @@ -508,4 +508,6 @@ sys_call_table: PTR sys_pselect6 PTR sys_ppoll PTR sys_unshare + PTR sys_splice + PTR sys32_sync_file_range /* 4305 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index dcbfd27071f0..397a70e651b5 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -246,7 +246,7 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en #ifdef CONFIG_64BIT /* HACK: Guess if the sign extension was forgotten */ if (start > 0x0000000080000000 && start < 0x00000000ffffffff) - start |= 0xffffffff00000000; + start |= 0xffffffff00000000UL; #endif end = start + size; @@ -355,8 +355,6 @@ static inline void bootmem_init(void) } #endif - memory_present(0, first_usable_pfn, max_low_pfn); - /* Initialize the boot-time allocator with low memory only. */ bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn); @@ -410,6 +408,7 @@ static inline void bootmem_init(void) /* Register lowmem ranges */ free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); + memory_present(0, curr_pfn, curr_pfn + size - 1); } /* Reserve the bootmap memory. */ @@ -419,17 +418,20 @@ static inline void bootmem_init(void) #ifdef CONFIG_BLK_DEV_INITRD initrd_below_start_ok = 1; if (initrd_start) { - unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start); + unsigned long initrd_size = ((unsigned char *)initrd_end) - + ((unsigned char *)initrd_start); + const int width = sizeof(long) * 2; + printk("Initial ramdisk at: 0x%p (%lu bytes)\n", (void *)initrd_start, initrd_size); if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) { printk("initrd extends beyond end of memory " "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n", - sizeof(long) * 2, - (unsigned long long)CPHYSADDR(initrd_end), - sizeof(long) * 2, - (unsigned long long)PFN_PHYS(max_low_pfn)); + width, + (unsigned long long) CPHYSADDR(initrd_end), + width, + (unsigned long long) PFN_PHYS(max_low_pfn)); initrd_start = initrd_end = 0; initrd_reserve_bootmem = 0; } @@ -529,7 +531,10 @@ void __init setup_arch(char **cmdline_p) int __init fpu_disable(char *s) { - cpu_data[0].options &= ~MIPS_CPU_FPU; + int i; + + for (i = 0; i < NR_CPUS; i++) + cpu_data[i].options &= ~MIPS_CPU_FPU; return 1; } diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 3ca786215d48..ce6cb915c0a7 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) save_gp_reg(31); #undef save_gp_reg -#ifdef CONFIG_32BIT err |= __put_user(regs->hi, &sc->sc_mdhi); err |= __put_user(regs->lo, &sc->sc_mdlo); if (cpu_has_dsp) { @@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) err |= __put_user(mflo3(), &sc->sc_lo3); err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); } -#endif -#ifdef CONFIG_64BIT - err |= __put_user(regs->hi, &sc->sc_hi[0]); - err |= __put_user(regs->lo, &sc->sc_lo[0]); - if (cpu_has_dsp) { - err |= __put_user(mfhi1(), &sc->sc_hi[1]); - err |= __put_user(mflo1(), &sc->sc_lo[1]); - err |= __put_user(mfhi2(), &sc->sc_hi[2]); - err |= __put_user(mflo2(), &sc->sc_lo[2]); - err |= __put_user(mfhi3(), &sc->sc_hi[3]); - err |= __put_user(mflo3(), &sc->sc_lo[3]); - err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); - } -#endif err |= __put_user(!!used_math(), &sc->sc_used_math); @@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) current_thread_info()->restart_block.fn = do_no_restart_syscall; err |= __get_user(regs->cp0_epc, &sc->sc_pc); -#ifdef CONFIG_32BIT err |= __get_user(regs->hi, &sc->sc_mdhi); err |= __get_user(regs->lo, &sc->sc_mdlo); if (cpu_has_dsp) { @@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); } -#endif -#ifdef CONFIG_64BIT - err |= __get_user(regs->hi, &sc->sc_hi[0]); - err |= __get_user(regs->lo, &sc->sc_lo[0]); - if (cpu_has_dsp) { - err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg); - err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg); - err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg); - err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg); - err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg); - err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg); - err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); - } -#endif #define restore_gp_reg(i) do { \ err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \ diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp-mt.c index 993b8bf56aaf..57770902b9ae 100644 --- a/arch/mips/kernel/smp_mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -1,8 +1,4 @@ /* - * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. - * - * Elizabeth Clarke (beth@mips.com) - * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. @@ -16,6 +12,10 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * + * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc. + * Elizabeth Clarke (beth@mips.com) + * Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) */ #include <linux/kernel.h> #include <linux/sched.h> @@ -24,6 +24,7 @@ #include <linux/compiler.h> #include <asm/atomic.h> +#include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/processor.h> #include <asm/system.h> @@ -33,8 +34,8 @@ #include <asm/time.h> #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> -#include <asm/cacheflush.h> -#include <asm/mips-boards/maltaint.h> +#include <asm/mips_mt.h> +#include <asm/mips-boards/maltaint.h> /* This is f*cking wrong */ #define MIPS_CPU_IPI_RESCHED_IRQ 0 #define MIPS_CPU_IPI_CALL_IRQ 1 @@ -66,6 +67,7 @@ void __init sanitize_tlb_entries(void) if (!cpu_has_mipsmt) return; + /* Enable VPC */ set_c0_mvpcontrol(MVPCONTROL_VPC); back_to_back_c0_hazard(); @@ -106,12 +108,12 @@ void __init sanitize_tlb_entries(void) static void ipi_resched_dispatch (struct pt_regs *regs) { - do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs); + do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ, regs); } static void ipi_call_dispatch (struct pt_regs *regs) { - do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs); + do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ, regs); } irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs) @@ -148,6 +150,11 @@ void plat_smp_setup(void) unsigned long val; int i, num; +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(0, mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ if (!cpu_has_mipsmt) return; @@ -155,6 +162,8 @@ void plat_smp_setup(void) dvpe(); dmt(); + mips_mt_set_cpuoptions(); + /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); @@ -189,11 +198,13 @@ void plat_smp_setup(void) if (i != 0) { write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); - write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP); /* set config to be the same as vpe0, particularly kseg0 coherency alg */ write_vpe_c0_config( read_c0_config()); + /* make sure there are no software interrupts pending */ + write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0)); + /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); } @@ -233,16 +244,16 @@ void plat_smp_setup(void) /* We'll wait until starting the secondaries before starting MVPE */ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} +void __init plat_prepare_cpus(unsigned int max_cpus) +{ /* set up ipi interrupts */ if (cpu_has_vint) { set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); } -} -void __init plat_prepare_cpus(unsigned int max_cpus) -{ cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; @@ -287,7 +298,8 @@ void prom_boot_secondary(int cpu, struct task_struct *idle) /* global pointer */ write_tc_gpr_gp((unsigned long)gp); - flush_icache_range((unsigned long)gp, (unsigned long)(gp + 1)); + flush_icache_range((unsigned long)gp, + (unsigned long)(gp + sizeof(struct thread_info))); /* finally out of configuration and into chaos */ clear_c0_mvpcontrol(MVPCONTROL_VPC); @@ -305,6 +317,12 @@ void prom_smp_finish(void) { write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(smp_processor_id(), mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + local_irq_enable(); } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 78d171bfa331..298f82fe8440 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -38,6 +38,10 @@ #include <asm/mmu_context.h> #include <asm/smp.h> +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/mipsmtregs.h> +#endif /* CONFIG_MIPS_MT_SMTC */ + cpumask_t phys_cpu_present_map; /* Bitmask of available CPUs */ volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ cpumask_t cpu_online_map; /* Bitmask of currently online CPUs */ @@ -85,6 +89,10 @@ asmlinkage void start_secondary(void) { unsigned int cpu; +#ifdef CONFIG_MIPS_MT_SMTC + /* Only do cpu_probe for first TC of CPU */ + if ((read_c0_tcbind() & TCBIND_CURTC) == 0) +#endif /* CONFIG_MIPS_MT_SMTC */ cpu_probe(); cpu_report(); per_cpu_trap_init(); @@ -179,11 +187,13 @@ int smp_call_function (void (*func) (void *info), void *info, int retry, if (wait) while (atomic_read(&data.finished) != cpus) barrier(); + call_data = NULL; spin_unlock(&smp_call_lock); return 0; } + void smp_call_function_interrupt(void) { void (*func) (void *info) = call_data->func; @@ -237,6 +247,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) current_thread_info()->cpu = 0; smp_tune_scheduling(); plat_prepare_cpus(max_cpus); +#ifndef CONFIG_HOTPLUG_CPU + cpu_present_map = cpu_possible_map; +#endif } /* preload SMP state for boot cpu */ @@ -432,7 +445,7 @@ static int __init topology_init(void) int cpu; int ret; - for_each_cpu(cpu) { + for_each_present_cpu(cpu) { ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL); if (ret) printk(KERN_WARNING "topology_init: register_cpu %d " @@ -446,5 +459,3 @@ subsys_initcall(topology_init); EXPORT_SYMBOL(flush_tlb_page); EXPORT_SYMBOL(flush_tlb_one); -EXPORT_SYMBOL(cpu_data); -EXPORT_SYMBOL(synchronize_irq); diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S new file mode 100644 index 000000000000..c9d65196d917 --- /dev/null +++ b/arch/mips/kernel/smtc-asm.S @@ -0,0 +1,130 @@ +/* + * Assembly Language Functions for MIPS MT SMTC support + */ + +/* + * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */ + +#include <asm/regdef.h> +#include <asm/asmmacro.h> +#include <asm/stackframe.h> +#include <asm/stackframe.h> + +/* + * "Software Interrupt" linkage. + * + * This is invoked when an "Interrupt" is sent from one TC to another, + * where the TC to be interrupted is halted, has it's Restart address + * and Status values saved by the "remote control" thread, then modified + * to cause execution to begin here, in kenel mode. This code then + * disguises the TC state as that of an exception and transfers + * control to the general exception or vectored interrupt handler. + */ + .set noreorder + +/* +The __smtc_ipi_vector would use k0 and k1 as temporaries and +1) Set EXL (this is per-VPE, so this can't be done by proxy!) +2) Restore the K/CU and IXMT bits to the pre "exception" state + (EXL means no interrupts and access to the kernel map). +3) Set EPC to be the saved value of TCRestart. +4) Jump to the exception handler entry point passed by the sender. + +CAN WE PROVE THAT WE WON'T DO THIS IF INTS DISABLED?? +*/ + +/* + * Reviled and slandered vision: Set EXL and restore K/CU/IXMT + * state of pre-halt thread, then save everything and call + * thought some function pointer to imaginary_exception, which + * will parse a register value or memory message queue to + * deliver things like interprocessor interrupts. On return + * from that function, jump to the global ret_from_irq code + * to invoke the scheduler and return as appropriate. + */ + +#define PT_PADSLOT4 (PT_R0-8) +#define PT_PADSLOT5 (PT_R0-4) + + .text + .align 5 +FEXPORT(__smtc_ipi_vector) + .set noat + /* Disable thread scheduling to make Status update atomic */ + DMT 27 # dmt k1 + ehb + /* Set EXL */ + mfc0 k0,CP0_STATUS + ori k0,k0,ST0_EXL + mtc0 k0,CP0_STATUS + ehb + /* Thread scheduling now inhibited by EXL. Restore TE state. */ + andi k1,k1,VPECONTROL_TE + beqz k1,1f + emt +1: + /* + * The IPI sender has put some information on the anticipated + * kernel stack frame. If we were in user mode, this will be + * built above the saved kernel SP. If we were already in the + * kernel, it will be built above the current CPU SP. + * + * Were we in kernel mode, as indicated by CU0? + */ + sll k1,k0,3 + .set noreorder + bltz k1,2f + move k1,sp + .set reorder + /* + * If previously in user mode, set CU0 and use kernel stack. + */ + li k1,ST0_CU0 + or k1,k1,k0 + mtc0 k1,CP0_STATUS + ehb + get_saved_sp + /* Interrupting TC will have pre-set values in slots in the new frame */ +2: subu k1,k1,PT_SIZE + /* Load TCStatus Value */ + lw k0,PT_TCSTATUS(k1) + /* Write it to TCStatus to restore CU/KSU/IXMT state */ + mtc0 k0,$2,1 + ehb + lw k0,PT_EPC(k1) + mtc0 k0,CP0_EPC + /* Save all will redundantly recompute the SP, but use it for now */ + SAVE_ALL + CLI + move a0,sp + /* Function to be invoked passed stack pad slot 5 */ + lw t0,PT_PADSLOT5(sp) + /* Argument from sender passed in stack pad slot 4 */ + lw a1,PT_PADSLOT4(sp) + jalr t0 + nop + j ret_from_irq + nop + +/* + * Called from idle loop to provoke processing of queued IPIs + * First IPI message in queue passed as argument. + */ + +LEAF(self_ipi) + /* Before anything else, block interrupts */ + mfc0 t0,CP0_TCSTATUS + ori t1,t0,TCSTATUS_IXMT + mtc0 t1,CP0_TCSTATUS + ehb + /* We know we're in kernel mode, so prepare stack frame */ + subu t1,sp,PT_SIZE + sw ra,PT_EPC(t1) + sw a0,PT_PADSLOT4(t1) + la t2,ipi_decode + sw t2,PT_PADSLOT5(t1) + /* Save pre-disable value of TCStatus */ + sw t0,PT_TCSTATUS(t1) + j __smtc_ipi_vector + nop +END(self_ipi) diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c new file mode 100644 index 000000000000..6f3709996172 --- /dev/null +++ b/arch/mips/kernel/smtc-proc.c @@ -0,0 +1,93 @@ +/* + * /proc hooks for SMTC kernel + * Copyright (C) 2005 Mips Technologies, Inc + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> + +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#include <asm/mipsregs.h> +#include <asm/cacheflush.h> +#include <linux/proc_fs.h> + +#include <asm/smtc_proc.h> + +/* + * /proc diagnostic and statistics hooks + */ + +/* + * Statistics gathered + */ +unsigned long selfipis[NR_CPUS]; + +struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS]; + +static struct proc_dir_entry *smtc_stats; + +atomic_t smtc_fpu_recoveries; + +static int proc_read_smtc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int totalen = 0; + int len; + int i; + extern unsigned long ebase; + + len = sprintf(page, "SMTC Status Word: 0x%08x\n", smtc_status); + totalen += len; + page += len; + len = sprintf(page, "Config7: 0x%08x\n", read_c0_config7()); + totalen += len; + page += len; + len = sprintf(page, "EBASE: 0x%08lx\n", ebase); + totalen += len; + page += len; + len = sprintf(page, "Counter Interrupts taken per CPU (TC)\n"); + totalen += len; + page += len; + for (i=0; i < NR_CPUS; i++) { + len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].timerints); + totalen += len; + page += len; + } + len = sprintf(page, "Self-IPIs by CPU:\n"); + totalen += len; + page += len; + for(i = 0; i < NR_CPUS; i++) { + len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis); + totalen += len; + page += len; + } + len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n", + atomic_read(&smtc_fpu_recoveries)); + totalen += len; + page += len; + + return totalen; +} + +void init_smtc_stats(void) +{ + int i; + + for (i=0; i<NR_CPUS; i++) { + smtc_cpu_stats[i].timerints = 0; + smtc_cpu_stats[i].selfipis = 0; + } + + atomic_set(&smtc_fpu_recoveries, 0); + + smtc_stats = create_proc_read_entry("smtc", 0444, NULL, + proc_read_smtc, NULL); +} diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c new file mode 100644 index 000000000000..2e8e52c135e6 --- /dev/null +++ b/arch/mips/kernel/smtc.c @@ -0,0 +1,1322 @@ +/* Copyright (C) 2004 Mips Technologies, Inc */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> + +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/hardirq.h> +#include <asm/hazards.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#include <asm/mipsregs.h> +#include <asm/cacheflush.h> +#include <asm/time.h> +#include <asm/addrspace.h> +#include <asm/smtc.h> +#include <asm/smtc_ipi.h> +#include <asm/smtc_proc.h> + +/* + * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. + */ + +/* + * MIPSCPU_INT_BASE is identically defined in both + * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h, + * but as yet there's no properly organized include structure that + * will ensure that the right *int.h file will be included for a + * given platform build. + */ + +#define MIPSCPU_INT_BASE 16 + +#define MIPS_CPU_IPI_IRQ 1 + +#define LOCK_MT_PRA() \ + local_irq_save(flags); \ + mtflags = dmt() + +#define UNLOCK_MT_PRA() \ + emt(mtflags); \ + local_irq_restore(flags) + +#define LOCK_CORE_PRA() \ + local_irq_save(flags); \ + mtflags = dvpe() + +#define UNLOCK_CORE_PRA() \ + evpe(mtflags); \ + local_irq_restore(flags) + +/* + * Data structures purely associated with SMTC parallelism + */ + + +/* + * Table for tracking ASIDs whose lifetime is prolonged. + */ + +asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; + +/* + * Clock interrupt "latch" buffers, per "CPU" + */ + +unsigned int ipi_timer_latch[NR_CPUS]; + +/* + * Number of InterProcessor Interupt (IPI) message buffers to allocate + */ + +#define IPIBUF_PER_CPU 4 + +struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q freeIPIq; + + +/* Forward declarations */ + +void ipi_decode(struct pt_regs *, struct smtc_ipi *); +void post_direct_ipi(int cpu, struct smtc_ipi *pipi); +void setup_cross_vpe_interrupts(void); +void init_smtc_stats(void); + +/* Global SMTC Status */ + +unsigned int smtc_status = 0; + +/* Boot command line configuration overrides */ + +static int vpelimit = 0; +static int tclimit = 0; +static int ipibuffers = 0; +static int nostlb = 0; +static int asidmask = 0; +unsigned long smtc_asid_mask = 0xff; + +static int __init maxvpes(char *str) +{ + get_option(&str, &vpelimit); + return 1; +} + +static int __init maxtcs(char *str) +{ + get_option(&str, &tclimit); + return 1; +} + +static int __init ipibufs(char *str) +{ + get_option(&str, &ipibuffers); + return 1; +} + +static int __init stlb_disable(char *s) +{ + nostlb = 1; + return 1; +} + +static int __init asidmask_set(char *str) +{ + get_option(&str, &asidmask); + switch(asidmask) { + case 0x1: + case 0x3: + case 0x7: + case 0xf: + case 0x1f: + case 0x3f: + case 0x7f: + case 0xff: + smtc_asid_mask = (unsigned long)asidmask; + break; + default: + printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask); + } + return 1; +} + +__setup("maxvpes=", maxvpes); +__setup("maxtcs=", maxtcs); +__setup("ipibufs=", ipibufs); +__setup("nostlb", stlb_disable); +__setup("asidmask=", asidmask_set); + +/* Enable additional debug checks before going into CPU idle loop */ +#define SMTC_IDLE_HOOK_DEBUG + +#ifdef SMTC_IDLE_HOOK_DEBUG + +static int hang_trig = 0; + +static int __init hangtrig_enable(char *s) +{ + hang_trig = 1; + return 1; +} + + +__setup("hangtrig", hangtrig_enable); + +#define DEFAULT_BLOCKED_IPI_LIMIT 32 + +static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT; + +static int __init tintq(char *str) +{ + get_option(&str, &timerq_limit); + return 1; +} + +__setup("tintq=", tintq); + +int imstuckcount[2][8]; +/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */ +int vpemask[2][8] = {{0,1,1,0,0,0,0,1},{0,1,0,0,0,0,0,1}}; +int tcnoprog[NR_CPUS]; +static atomic_t idle_hook_initialized = {0}; +static int clock_hang_reported[NR_CPUS]; + +#endif /* SMTC_IDLE_HOOK_DEBUG */ + +/* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */ + +void __init sanitize_tlb_entries(void) +{ + printk("Deprecated sanitize_tlb_entries() invoked\n"); +} + + +/* + * Configure shared TLB - VPC configuration bit must be set by caller + */ + +void smtc_configure_tlb(void) +{ + int i,tlbsiz,vpes; + unsigned long mvpconf0; + unsigned long config1val; + + /* Set up ASID preservation table */ + for (vpes=0; vpes<MAX_SMTC_TLBS; vpes++) { + for(i = 0; i < MAX_SMTC_ASIDS; i++) { + smtc_live_asid[vpes][i] = 0; + } + } + mvpconf0 = read_c0_mvpconf0(); + + if ((vpes = ((mvpconf0 & MVPCONF0_PVPE) + >> MVPCONF0_PVPE_SHIFT) + 1) > 1) { + /* If we have multiple VPEs, try to share the TLB */ + if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) { + /* + * If TLB sizing is programmable, shared TLB + * size is the total available complement. + * Otherwise, we have to take the sum of all + * static VPE TLB entries. + */ + if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE) + >> MVPCONF0_PTLBE_SHIFT)) == 0) { + /* + * If there's more than one VPE, there had better + * be more than one TC, because we need one to bind + * to each VPE in turn to be able to read + * its configuration state! + */ + settc(1); + /* Stop the TC from doing anything foolish */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + /* No need to un-Halt - that happens later anyway */ + for (i=0; i < vpes; i++) { + write_tc_c0_tcbind(i); + /* + * To be 100% sure we're really getting the right + * information, we exit the configuration state + * and do an IHB after each rebinding. + */ + write_c0_mvpcontrol( + read_c0_mvpcontrol() & ~ MVPCONTROL_VPC ); + mips_ihb(); + /* + * Only count if the MMU Type indicated is TLB + */ + if(((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) { + config1val = read_vpe_c0_config1(); + tlbsiz += ((config1val >> 25) & 0x3f) + 1; + } + + /* Put core back in configuration state */ + write_c0_mvpcontrol( + read_c0_mvpcontrol() | MVPCONTROL_VPC ); + mips_ihb(); + } + } + write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB); + + /* + * Setup kernel data structures to use software total, + * rather than read the per-VPE Config1 value. The values + * for "CPU 0" gets copied to all the other CPUs as part + * of their initialization in smtc_cpu_setup(). + */ + + tlbsiz = tlbsiz & 0x3f; /* MIPS32 limits TLB indices to 64 */ + cpu_data[0].tlbsize = tlbsiz; + smtc_status |= SMTC_TLB_SHARED; + + printk("TLB of %d entry pairs shared by %d VPEs\n", + tlbsiz, vpes); + } else { + printk("WARNING: TLB Not Sharable on SMTC Boot!\n"); + } + } +} + + +/* + * Incrementally build the CPU map out of constituent MIPS MT cores, + * using the specified available VPEs and TCs. Plaform code needs + * to ensure that each MIPS MT core invokes this routine on reset, + * one at a time(!). + * + * This version of the build_cpu_map and prepare_cpus routines assumes + * that *all* TCs of a MIPS MT core will be used for Linux, and that + * they will be spread across *all* available VPEs (to minimise the + * loss of efficiency due to exception service serialization). + * An improved version would pick up configuration information and + * possibly leave some TCs/VPEs as "slave" processors. + * + * Use c0_MVPConf0 to find out how many TCs are available, setting up + * phys_cpu_present_map and the logical/physical mappings. + */ + +int __init mipsmt_build_cpu_map(int start_cpu_slot) +{ + int i, ntcs; + + /* + * The CPU map isn't actually used for anything at this point, + * so it's not clear what else we should do apart from set + * everything up so that "logical" = "physical". + */ + ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = i; + __cpu_logical_map[i] = i; + } + /* Initialize map of CPUs with FPUs */ + cpus_clear(mt_fpu_cpumask); + + /* One of those TC's is the one booting, and not a secondary... */ + printk("%i available secondary CPU TC(s)\n", i - 1); + + return i; +} + +/* + * Common setup before any secondaries are started + * Make sure all CPU's are in a sensible state before we boot any of the + * secondaries. + * + * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly + * as possible across the available VPEs. + */ + +static void smtc_tc_setup(int vpe, int tc, int cpu) +{ + settc(tc); + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + write_tc_c0_tcstatus((read_tc_c0_tcstatus() + & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT)) + | TCSTATUS_A); + write_tc_c0_tccontext(0); + /* Bind tc to vpe */ + write_tc_c0_tcbind(vpe); + /* In general, all TCs should have the same cpu_data indications */ + memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips)); + /* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */ + if (cpu_data[0].cputype == CPU_34K) + cpu_data[cpu].options &= ~MIPS_CPU_FPU; + cpu_data[cpu].vpe_id = vpe; + cpu_data[cpu].tc_id = tc; +} + + +void mipsmt_prepare_cpus(void) +{ + int i, vpe, tc, ntc, nvpe, tcpervpe, slop, cpu; + unsigned long flags; + unsigned long val; + int nipi; + struct smtc_ipi *pipi; + + /* disable interrupts so we can disable MT */ + local_irq_save(flags); + /* disable MT so we can configure */ + dvpe(); + dmt(); + + freeIPIq.lock = SPIN_LOCK_UNLOCKED; + + /* + * We probably don't have as many VPEs as we do SMP "CPUs", + * but it's possible - and in any case we'll never use more! + */ + for (i=0; i<NR_CPUS; i++) { + IPIQ[i].head = IPIQ[i].tail = NULL; + IPIQ[i].lock = SPIN_LOCK_UNLOCKED; + IPIQ[i].depth = 0; + ipi_timer_latch[i] = 0; + } + + /* cpu_data index starts at zero */ + cpu = 0; + cpu_data[cpu].vpe_id = 0; + cpu_data[cpu].tc_id = 0; + cpu++; + + /* Report on boot-time options */ + mips_mt_set_cpuoptions (); + if (vpelimit > 0) + printk("Limit of %d VPEs set\n", vpelimit); + if (tclimit > 0) + printk("Limit of %d TCs set\n", tclimit); + if (nostlb) { + printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n"); + } + if (asidmask) + printk("ASID mask value override to 0x%x\n", asidmask); + + /* Temporary */ +#ifdef SMTC_IDLE_HOOK_DEBUG + if (hang_trig) + printk("Logic Analyser Trigger on suspected TC hang\n"); +#endif /* SMTC_IDLE_HOOK_DEBUG */ + + /* Put MVPE's into 'configuration state' */ + write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC ); + + val = read_c0_mvpconf0(); + nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + if (vpelimit > 0 && nvpe > vpelimit) + nvpe = vpelimit; + ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + if (ntc > NR_CPUS) + ntc = NR_CPUS; + if (tclimit > 0 && ntc > tclimit) + ntc = tclimit; + tcpervpe = ntc / nvpe; + slop = ntc % nvpe; /* Residual TCs, < NVPE */ + + /* Set up shared TLB */ + smtc_configure_tlb(); + + for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) { + /* + * Set the MVP bits. + */ + settc(tc); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP); + if (vpe != 0) + printk(", "); + printk("VPE %d: TC", vpe); + for (i = 0; i < tcpervpe; i++) { + /* + * TC 0 is bound to VPE 0 at reset, + * and is presumably executing this + * code. Leave it alone! + */ + if (tc != 0) { + smtc_tc_setup(vpe,tc, cpu); + cpu++; + } + printk(" %d", tc); + tc++; + } + if (slop) { + if (tc != 0) { + smtc_tc_setup(vpe,tc, cpu); + cpu++; + } + printk(" %d", tc); + tc++; + slop--; + } + if (vpe != 0) { + /* + * Clear any stale software interrupts from VPE's Cause + */ + write_vpe_c0_cause(0); + + /* + * Clear ERL/EXL of VPEs other than 0 + * and set restricted interrupt enable/mask. + */ + write_vpe_c0_status((read_vpe_c0_status() + & ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM)) + | (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7 + | ST0_IE)); + /* + * set config to be the same as vpe0, + * particularly kseg0 coherency alg + */ + write_vpe_c0_config(read_c0_config()); + /* Clear any pending timer interrupt */ + write_vpe_c0_compare(0); + /* Propagate Config7 */ + write_vpe_c0_config7(read_c0_config7()); + } + /* enable multi-threading within VPE */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); + /* enable the VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + } + + /* + * Pull any physically present but unused TCs out of circulation. + */ + while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) { + cpu_clear(tc, phys_cpu_present_map); + cpu_clear(tc, cpu_present_map); + tc++; + } + + /* release config state */ + write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC ); + + printk("\n"); + + /* Set up coprocessor affinity CPU mask(s) */ + + for (tc = 0; tc < ntc; tc++) { + if(cpu_data[tc].options & MIPS_CPU_FPU) + cpu_set(tc, mt_fpu_cpumask); + } + + /* set up ipi interrupts... */ + + /* If we have multiple VPEs running, set up the cross-VPE interrupt */ + + if (nvpe > 1) + setup_cross_vpe_interrupts(); + + /* Set up queue of free IPI "messages". */ + nipi = NR_CPUS * IPIBUF_PER_CPU; + if (ipibuffers > 0) + nipi = ipibuffers; + + pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL); + if (pipi == NULL) + panic("kmalloc of IPI message buffers failed\n"); + else + printk("IPI buffer pool of %d buffers\n", nipi); + for (i = 0; i < nipi; i++) { + smtc_ipi_nq(&freeIPIq, pipi); + pipi++; + } + + /* Arm multithreading and enable other VPEs - but all TCs are Halted */ + emt(EMT_ENABLE); + evpe(EVPE_ENABLE); + local_irq_restore(flags); + /* Initialize SMTC /proc statistics/diagnostics */ + init_smtc_stats(); +} + + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + * + */ +void smtc_boot_secondary(int cpu, struct task_struct *idle) +{ + extern u32 kernelsp[NR_CPUS]; + long flags; + int mtflags; + + LOCK_MT_PRA(); + if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { + dvpe(); + } + settc(cpu_data[cpu].tc_id); + + /* pc */ + write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); + + /* stack pointer */ + kernelsp[cpu] = __KSTK_TOS(idle); + write_tc_gpr_sp(__KSTK_TOS(idle)); + + /* global pointer */ + write_tc_gpr_gp((unsigned long)idle->thread_info); + + smtc_status |= SMTC_MTC_ACTIVE; + write_tc_c0_tchalt(0); + if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { + evpe(EVPE_ENABLE); + } + UNLOCK_MT_PRA(); +} + +void smtc_init_secondary(void) +{ + /* + * Start timer on secondary VPEs if necessary. + * mips_timer_setup should already have been invoked by init/main + * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and in ascending order + * to across available VPEs. + */ + if(((read_c0_tcbind() & TCBIND_CURTC) != 0) + && ((read_c0_tcbind() & TCBIND_CURVPE) + != cpu_data[smp_processor_id() - 1].vpe_id)){ + write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ); + } + + local_irq_enable(); +} + +void smtc_smp_finish(void) +{ + printk("TC %d going on-line as CPU %d\n", + cpu_data[smp_processor_id()].tc_id, smp_processor_id()); +} + +void smtc_cpus_done(void) +{ +} + +/* + * Support for SMTC-optimized driver IRQ registration + */ + +/* + * SMTC Kernel needs to manipulate low-level CPU interrupt mask + * in do_IRQ. These are passed in setup_irq_smtc() and stored + * in this table. + */ + +int setup_irq_smtc(unsigned int irq, struct irqaction * new, + unsigned long hwmask) +{ + irq_hwmask[irq] = hwmask; + + return setup_irq(irq, new); +} + +/* + * IPI model for SMTC is tricky, because interrupts aren't TC-specific. + * Within a VPE one TC can interrupt another by different approaches. + * The easiest to get right would probably be to make all TCs except + * the target IXMT and set a software interrupt, but an IXMT-based + * scheme requires that a handler must run before a new IPI could + * be sent, which would break the "broadcast" loops in MIPS MT. + * A more gonzo approach within a VPE is to halt the TC, extract + * its Restart, Status, and a couple of GPRs, and program the Restart + * address to emulate an interrupt. + * + * Within a VPE, one can be confident that the target TC isn't in + * a critical EXL state when halted, since the write to the Halt + * register could not have issued on the writing thread if the + * halting thread had EXL set. So k0 and k1 of the target TC + * can be used by the injection code. Across VPEs, one can't + * be certain that the target TC isn't in a critical exception + * state. So we try a two-step process of sending a software + * interrupt to the target VPE, which either handles the event + * itself (if it was the target) or injects the event within + * the VPE. + */ + +void smtc_ipi_qdump(void) +{ + int i; + + for (i = 0; i < NR_CPUS ;i++) { + printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", + i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail, + IPIQ[i].depth); + } +} + +/* + * The standard atomic.h primitives don't quite do what we want + * here: We need an atomic add-and-return-previous-value (which + * could be done with atomic_add_return and a decrement) and an + * atomic set/zero-and-return-previous-value (which can't really + * be done with the atomic.h primitives). And since this is + * MIPS MT, we can assume that we have LL/SC. + */ +static __inline__ int atomic_postincrement(unsigned int *pv) +{ + unsigned long result; + + unsigned long temp; + + __asm__ __volatile__( + "1: ll %0, %2 \n" + " addu %1, %0, 1 \n" + " sc %1, %2 \n" + " beqz %1, 1b \n" + " sync \n" + : "=&r" (result), "=&r" (temp), "=m" (*pv) + : "m" (*pv) + : "memory"); + + return result; +} + +/* No longer used in IPI dispatch, but retained for future recycling */ + +static __inline__ int atomic_postclear(unsigned int *pv) +{ + unsigned long result; + + unsigned long temp; + + __asm__ __volatile__( + "1: ll %0, %2 \n" + " or %1, $0, $0 \n" + " sc %1, %2 \n" + " beqz %1, 1b \n" + " sync \n" + : "=&r" (result), "=&r" (temp), "=m" (*pv) + : "m" (*pv) + : "memory"); + + return result; +} + + +void smtc_send_ipi(int cpu, int type, unsigned int action) +{ + int tcstatus; + struct smtc_ipi *pipi; + long flags; + int mtflags; + + if (cpu == smp_processor_id()) { + printk("Cannot Send IPI to self!\n"); + return; + } + /* Set up a descriptor, to be delivered either promptly or queued */ + pipi = smtc_ipi_dq(&freeIPIq); + if (pipi == NULL) { + bust_spinlocks(1); + mips_mt_regdump(dvpe()); + panic("IPI Msg. Buffers Depleted\n"); + } + pipi->type = type; + pipi->arg = (void *)action; + pipi->dest = cpu; + if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { + /* If not on same VPE, enqueue and send cross-VPE interupt */ + smtc_ipi_nq(&IPIQ[cpu], pipi); + LOCK_CORE_PRA(); + settc(cpu_data[cpu].tc_id); + write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1); + UNLOCK_CORE_PRA(); + } else { + /* + * Not sufficient to do a LOCK_MT_PRA (dmt) here, + * since ASID shootdown on the other VPE may + * collide with this operation. + */ + LOCK_CORE_PRA(); + settc(cpu_data[cpu].tc_id); + /* Halt the targeted TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + /* + * Inspect TCStatus - if IXMT is set, we have to queue + * a message. Otherwise, we set up the "interrupt" + * of the other TC + */ + tcstatus = read_tc_c0_tcstatus(); + + if ((tcstatus & TCSTATUS_IXMT) != 0) { + /* + * Spin-waiting here can deadlock, + * so we queue the message for the target TC. + */ + write_tc_c0_tchalt(0); + UNLOCK_CORE_PRA(); + /* Try to reduce redundant timer interrupt messages */ + if(type == SMTC_CLOCK_TICK) { + if(atomic_postincrement(&ipi_timer_latch[cpu])!=0) { + smtc_ipi_nq(&freeIPIq, pipi); + return; + } + } + smtc_ipi_nq(&IPIQ[cpu], pipi); + } else { + post_direct_ipi(cpu, pipi); + write_tc_c0_tchalt(0); + UNLOCK_CORE_PRA(); + } + } +} + +/* + * Send IPI message to Halted TC, TargTC/TargVPE already having been set + */ +void post_direct_ipi(int cpu, struct smtc_ipi *pipi) +{ + struct pt_regs *kstack; + unsigned long tcstatus; + unsigned long tcrestart; + extern u32 kernelsp[NR_CPUS]; + extern void __smtc_ipi_vector(void); + + /* Extract Status, EPC from halted TC */ + tcstatus = read_tc_c0_tcstatus(); + tcrestart = read_tc_c0_tcrestart(); + /* If TCRestart indicates a WAIT instruction, advance the PC */ + if ((tcrestart & 0x80000000) + && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) { + tcrestart += 4; + } + /* + * Save on TC's future kernel stack + * + * CU bit of Status is indicator that TC was + * already running on a kernel stack... + */ + if(tcstatus & ST0_CU0) { + /* Note that this "- 1" is pointer arithmetic */ + kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1; + } else { + kstack = ((struct pt_regs *)kernelsp[cpu]) - 1; + } + + kstack->cp0_epc = (long)tcrestart; + /* Save TCStatus */ + kstack->cp0_tcstatus = tcstatus; + /* Pass token of operation to be performed kernel stack pad area */ + kstack->pad0[4] = (unsigned long)pipi; + /* Pass address of function to be called likewise */ + kstack->pad0[5] = (unsigned long)&ipi_decode; + /* Set interrupt exempt and kernel mode */ + tcstatus |= TCSTATUS_IXMT; + tcstatus &= ~TCSTATUS_TKSU; + write_tc_c0_tcstatus(tcstatus); + ehb(); + /* Set TC Restart address to be SMTC IPI vector */ + write_tc_c0_tcrestart(__smtc_ipi_vector); +} + +void ipi_resched_interrupt(struct pt_regs *regs) +{ + /* Return from interrupt should be enough to cause scheduler check */ +} + + +void ipi_call_interrupt(struct pt_regs *regs) +{ + /* Invoke generic function invocation code in smp.c */ + smp_call_function_interrupt(); +} + +void ipi_decode(struct pt_regs *regs, struct smtc_ipi *pipi) +{ + void *arg_copy = pipi->arg; + int type_copy = pipi->type; + int dest_copy = pipi->dest; + + smtc_ipi_nq(&freeIPIq, pipi); + switch (type_copy) { + case SMTC_CLOCK_TICK: + /* Invoke Clock "Interrupt" */ + ipi_timer_latch[dest_copy] = 0; +#ifdef SMTC_IDLE_HOOK_DEBUG + clock_hang_reported[dest_copy] = 0; +#endif /* SMTC_IDLE_HOOK_DEBUG */ + local_timer_interrupt(0, NULL, regs); + break; + case LINUX_SMP_IPI: + switch ((int)arg_copy) { + case SMP_RESCHEDULE_YOURSELF: + ipi_resched_interrupt(regs); + break; + case SMP_CALL_FUNCTION: + ipi_call_interrupt(regs); + break; + default: + printk("Impossible SMTC IPI Argument 0x%x\n", + (int)arg_copy); + break; + } + break; + default: + printk("Impossible SMTC IPI Type 0x%x\n", type_copy); + break; + } +} + +void deferred_smtc_ipi(struct pt_regs *regs) +{ + struct smtc_ipi *pipi; + unsigned long flags; +/* DEBUG */ + int q = smp_processor_id(); + + /* + * Test is not atomic, but much faster than a dequeue, + * and the vast majority of invocations will have a null queue. + */ + if(IPIQ[q].head != NULL) { + while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { + /* ipi_decode() should be called with interrupts off */ + local_irq_save(flags); + ipi_decode(regs, pipi); + local_irq_restore(flags); + } + } +} + +/* + * Send clock tick to all TCs except the one executing the funtion + */ + +void smtc_timer_broadcast(int vpe) +{ + int cpu; + int myTC = cpu_data[smp_processor_id()].tc_id; + int myVPE = cpu_data[smp_processor_id()].vpe_id; + + smtc_cpu_stats[smp_processor_id()].timerints++; + + for_each_online_cpu(cpu) { + if (cpu_data[cpu].vpe_id == myVPE && + cpu_data[cpu].tc_id != myTC) + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } +} + +/* + * Cross-VPE interrupts in the SMTC prototype use "software interrupts" + * set via cross-VPE MTTR manipulation of the Cause register. It would be + * in some regards preferable to have external logic for "doorbell" hardware + * interrupts. + */ + +static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ; + +static irqreturn_t ipi_interrupt(int irq, void *dev_idm, struct pt_regs *regs) +{ + int my_vpe = cpu_data[smp_processor_id()].vpe_id; + int my_tc = cpu_data[smp_processor_id()].tc_id; + int cpu; + struct smtc_ipi *pipi; + unsigned long tcstatus; + int sent; + long flags; + unsigned int mtflags; + unsigned int vpflags; + + /* + * So long as cross-VPE interrupts are done via + * MFTR/MTTR read-modify-writes of Cause, we need + * to stop other VPEs whenever the local VPE does + * anything similar. + */ + local_irq_save(flags); + vpflags = dvpe(); + clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ); + set_c0_status(0x100 << MIPS_CPU_IPI_IRQ); + irq_enable_hazard(); + evpe(vpflags); + local_irq_restore(flags); + + /* + * Cross-VPE Interrupt handler: Try to directly deliver IPIs + * queued for TCs on this VPE other than the current one. + * Return-from-interrupt should cause us to drain the queue + * for the current TC, so we ought not to have to do it explicitly here. + */ + + for_each_online_cpu(cpu) { + if (cpu_data[cpu].vpe_id != my_vpe) + continue; + + pipi = smtc_ipi_dq(&IPIQ[cpu]); + if (pipi != NULL) { + if (cpu_data[cpu].tc_id != my_tc) { + sent = 0; + LOCK_MT_PRA(); + settc(cpu_data[cpu].tc_id); + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + tcstatus = read_tc_c0_tcstatus(); + if ((tcstatus & TCSTATUS_IXMT) == 0) { + post_direct_ipi(cpu, pipi); + sent = 1; + } + write_tc_c0_tchalt(0); + UNLOCK_MT_PRA(); + if (!sent) { + smtc_ipi_req(&IPIQ[cpu], pipi); + } + } else { + /* + * ipi_decode() should be called + * with interrupts off + */ + local_irq_save(flags); + ipi_decode(regs, pipi); + local_irq_restore(flags); + } + } + } + + return IRQ_HANDLED; +} + +static void ipi_irq_dispatch(struct pt_regs *regs) +{ + do_IRQ(cpu_ipi_irq, regs); +} + +static struct irqaction irq_ipi; + +void setup_cross_vpe_interrupts(void) +{ + if (!cpu_has_vint) + panic("SMTC Kernel requires Vectored Interupt support"); + + set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch); + + irq_ipi.handler = ipi_interrupt; + irq_ipi.flags = SA_INTERRUPT; + irq_ipi.name = "SMTC_IPI"; + + setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ)); + + irq_desc[cpu_ipi_irq].status |= IRQ_PER_CPU; +} + +/* + * SMTC-specific hacks invoked from elsewhere in the kernel. + */ + +void smtc_idle_loop_hook(void) +{ +#ifdef SMTC_IDLE_HOOK_DEBUG + int im; + int flags; + int mtflags; + int bit; + int vpe; + int tc; + int hook_ntcs; + /* + * printk within DMT-protected regions can deadlock, + * so buffer diagnostic messages for later output. + */ + char *pdb_msg; + char id_ho_db_msg[768]; /* worst-case use should be less than 700 */ + + if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */ + if (atomic_add_return(1, &idle_hook_initialized) == 1) { + int mvpconf0; + /* Tedious stuff to just do once */ + mvpconf0 = read_c0_mvpconf0(); + hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + if (hook_ntcs > NR_CPUS) + hook_ntcs = NR_CPUS; + for (tc = 0; tc < hook_ntcs; tc++) { + tcnoprog[tc] = 0; + clock_hang_reported[tc] = 0; + } + for (vpe = 0; vpe < 2; vpe++) + for (im = 0; im < 8; im++) + imstuckcount[vpe][im] = 0; + printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs); + atomic_set(&idle_hook_initialized, 1000); + } else { + /* Someone else is initializing in parallel - let 'em finish */ + while (atomic_read(&idle_hook_initialized) < 1000) + ; + } + } + + /* Have we stupidly left IXMT set somewhere? */ + if (read_c0_tcstatus() & 0x400) { + write_c0_tcstatus(read_c0_tcstatus() & ~0x400); + ehb(); + printk("Dangling IXMT in cpu_idle()\n"); + } + + /* Have we stupidly left an IM bit turned off? */ +#define IM_LIMIT 2000 + local_irq_save(flags); + mtflags = dmt(); + pdb_msg = &id_ho_db_msg[0]; + im = read_c0_status(); + vpe = cpu_data[smp_processor_id()].vpe_id; + for (bit = 0; bit < 8; bit++) { + /* + * In current prototype, I/O interrupts + * are masked for VPE > 0 + */ + if (vpemask[vpe][bit]) { + if (!(im & (0x100 << bit))) + imstuckcount[vpe][bit]++; + else + imstuckcount[vpe][bit] = 0; + if (imstuckcount[vpe][bit] > IM_LIMIT) { + set_c0_status(0x100 << bit); + ehb(); + imstuckcount[vpe][bit] = 0; + pdb_msg += sprintf(pdb_msg, + "Dangling IM %d fixed for VPE %d\n", bit, + vpe); + } + } + } + + /* + * Now that we limit outstanding timer IPIs, check for hung TC + */ + for (tc = 0; tc < NR_CPUS; tc++) { + /* Don't check ourself - we'll dequeue IPIs just below */ + if ((tc != smp_processor_id()) && + ipi_timer_latch[tc] > timerq_limit) { + if (clock_hang_reported[tc] == 0) { + pdb_msg += sprintf(pdb_msg, + "TC %d looks hung with timer latch at %d\n", + tc, ipi_timer_latch[tc]); + clock_hang_reported[tc]++; + } + } + } + emt(mtflags); + local_irq_restore(flags); + if (pdb_msg != &id_ho_db_msg[0]) + printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); +#endif /* SMTC_IDLE_HOOK_DEBUG */ + /* + * To the extent that we've ever turned interrupts off, + * we may have accumulated deferred IPIs. This is subtle. + * If we use the smtc_ipi_qdepth() macro, we'll get an + * exact number - but we'll also disable interrupts + * and create a window of failure where a new IPI gets + * queued after we test the depth but before we re-enable + * interrupts. So long as IXMT never gets set, however, + * we should be OK: If we pick up something and dispatch + * it here, that's great. If we see nothing, but concurrent + * with this operation, another TC sends us an IPI, IXMT + * is clear, and we'll handle it as a real pseudo-interrupt + * and not a pseudo-pseudo interrupt. + */ + if (IPIQ[smp_processor_id()].depth > 0) { + struct smtc_ipi *pipi; + extern void self_ipi(struct smtc_ipi *); + + if ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()])) != NULL) { + self_ipi(pipi); + smtc_cpu_stats[smp_processor_id()].selfipis++; + } + } +} + +void smtc_soft_dump(void) +{ + int i; + + printk("Counter Interrupts taken per CPU (TC)\n"); + for (i=0; i < NR_CPUS; i++) { + printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints); + } + printk("Self-IPI invocations:\n"); + for (i=0; i < NR_CPUS; i++) { + printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); + } + smtc_ipi_qdump(); + printk("Timer IPI Backlogs:\n"); + for (i=0; i < NR_CPUS; i++) { + printk("%d: %d\n", i, ipi_timer_latch[i]); + } + printk("%d Recoveries of \"stolen\" FPU\n", + atomic_read(&smtc_fpu_recoveries)); +} + + +/* + * TLB management routines special to SMTC + */ + +void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) +{ + unsigned long flags, mtflags, tcstat, prevhalt, asid; + int tlb, i; + + /* + * It would be nice to be able to use a spinlock here, + * but this is invoked from within TLB flush routines + * that protect themselves with DVPE, so if a lock is + * held by another TC, it'll never be freed. + * + * DVPE/DMT must not be done with interrupts enabled, + * so even so most callers will already have disabled + * them, let's be really careful... + */ + + local_irq_save(flags); + if (smtc_status & SMTC_TLB_SHARED) { + mtflags = dvpe(); + tlb = 0; + } else { + mtflags = dmt(); + tlb = cpu_data[cpu].vpe_id; + } + asid = asid_cache(cpu); + + do { + if (!((asid += ASID_INC) & ASID_MASK) ) { + if (cpu_has_vtag_icache) + flush_icache_all(); + /* Traverse all online CPUs (hack requires contigous range) */ + for (i = 0; i < num_online_cpus(); i++) { + /* + * We don't need to worry about our own CPU, nor those of + * CPUs who don't share our TLB. + */ + if ((i != smp_processor_id()) && + ((smtc_status & SMTC_TLB_SHARED) || + (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) { + settc(cpu_data[i].tc_id); + prevhalt = read_tc_c0_tchalt() & TCHALT_H; + if (!prevhalt) { + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + } + tcstat = read_tc_c0_tcstatus(); + smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i); + if (!prevhalt) + write_tc_c0_tchalt(0); + } + } + if (!asid) /* fix version if needed */ + asid = ASID_FIRST_VERSION; + local_flush_tlb_all(); /* start new asid cycle */ + } + } while (smtc_live_asid[tlb][(asid & ASID_MASK)]); + + /* + * SMTC shares the TLB within VPEs and possibly across all VPEs. + */ + for (i = 0; i < num_online_cpus(); i++) { + if ((smtc_status & SMTC_TLB_SHARED) || + (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id)) + cpu_context(i, mm) = asid_cache(i) = asid; + } + + if (smtc_status & SMTC_TLB_SHARED) + evpe(mtflags); + else + emt(mtflags); + local_irq_restore(flags); +} + +/* + * Invoked from macros defined in mmu_context.h + * which must already have disabled interrupts + * and done a DVPE or DMT as appropriate. + */ + +void smtc_flush_tlb_asid(unsigned long asid) +{ + int entry; + unsigned long ehi; + + entry = read_c0_wired(); + + /* Traverse all non-wired entries */ + while (entry < current_cpu_data.tlbsize) { + write_c0_index(entry); + ehb(); + tlb_read(); + ehb(); + ehi = read_c0_entryhi(); + if((ehi & ASID_MASK) == asid) { + /* + * Invalidate only entries with specified ASID, + * makiing sure all entries differ. + */ + write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1))); + write_c0_entrylo0(0); + write_c0_entrylo1(0); + mtc0_tlbw_hazard(); + tlb_write_indexed(); + } + entry++; + } + write_c0_index(PARKED_INDEX); + tlbw_use_hazard(); +} + +/* + * Support for single-threading cache flush operations. + */ + +int halt_state_save[NR_CPUS]; + +/* + * To really, really be sure that nothing is being done + * by other TCs, halt them all. This code assumes that + * a DVPE has already been done, so while their Halted + * state is theoretically architecturally unstable, in + * practice, it's not going to change while we're looking + * at it. + */ + +void smtc_cflush_lockdown(void) +{ + int cpu; + + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id()) { + settc(cpu_data[cpu].tc_id); + halt_state_save[cpu] = read_tc_c0_tchalt(); + write_tc_c0_tchalt(TCHALT_H); + } + } + mips_ihb(); +} + +/* It would be cheating to change the cpu_online states during a flush! */ + +void smtc_cflush_release(void) +{ + int cpu; + + /* + * Start with a hazard barrier to ensure + * that all CACHE ops have played through. + */ + mips_ihb(); + + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id()) { + settc(cpu_data[cpu].tc_id); + write_tc_c0_tchalt(halt_state_save[cpu]); + } + } + mips_ihb(); +} diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 2aeaa2fd4b32..5e8a18a8e2bd 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -276,31 +276,9 @@ void sys_set_thread_area(unsigned long addr) asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) { - int tmp, len; - char __user *name; + int tmp; switch(cmd) { - case SETNAME: { - char nodename[__NEW_UTS_LEN + 1]; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - name = (char __user *) arg1; - - len = strncpy_from_user(nodename, name, __NEW_UTS_LEN); - if (len < 0) - return -EFAULT; - - down_write(&uts_sem); - strncpy(system_utsname.nodename, nodename, len); - nodename[__NEW_UTS_LEN] = '\0'; - strlcpy(system_utsname.nodename, nodename, - sizeof(system_utsname.nodename)); - up_write(&uts_sem); - return 0; - } - case MIPS_ATOMIC_SET: printk(KERN_CRIT "How did I get here?\n"); return -EINVAL; @@ -313,9 +291,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) case FLUSH_CACHE: __flush_cache_all(); return 0; - - case MIPS_RDNVRAM: - return -EIO; } return -EINVAL; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 5e51a2d8f3f0..13ff4da598cd 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -116,8 +116,7 @@ static void c0_timer_ack(void) write_c0_compare(expirelo); /* Check to see if we have missed any timer interrupts. */ - count = read_c0_count(); - if ((count - expirelo) < 0x7fffffff) { + while (((count = read_c0_count()) - expirelo) < 0x7fffffff) { /* missed_timer_count++; */ expirelo = count + cycles_per_jiffy; write_c0_compare(expirelo); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index bed0eb6cf55d..a7564b08eb4d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -42,6 +42,7 @@ #include <asm/watch.h> #include <asm/types.h> +extern asmlinkage void handle_int(void); extern asmlinkage void handle_tlbm(void); extern asmlinkage void handle_tlbl(void); extern asmlinkage void handle_tlbs(void); @@ -279,9 +280,16 @@ static DEFINE_SPINLOCK(die_lock); NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs) { static int die_counter; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long dvpret = dvpe(); +#endif /* CONFIG_MIPS_MT_SMTC */ console_verbose(); spin_lock_irq(&die_lock); + bust_spinlocks(1); +#ifdef CONFIG_MIPS_MT_SMTC + mips_mt_regdump(dvpret); +#endif /* CONFIG_MIPS_MT_SMTC */ printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); spin_unlock_irq(&die_lock); @@ -750,12 +758,43 @@ asmlinkage void do_cpu(struct pt_regs *regs) ¤t->thread.fpu.soft); if (sig) force_sig(sig, current); +#ifdef CONFIG_MIPS_MT_FPAFF + else { + /* + * MIPS MT processors may have fewer FPU contexts + * than CPU threads. If we've emulated more than + * some threshold number of instructions, force + * migration to a "CPU" that has FP support. + */ + if(mt_fpemul_threshold > 0 + && ((current->thread.emulated_fp++ + > mt_fpemul_threshold))) { + /* + * If there's no FPU present, or if the + * application has already restricted + * the allowed set to exclude any CPUs + * with FPUs, we'll skip the procedure. + */ + if (cpus_intersects(current->cpus_allowed, + mt_fpu_cpumask)) { + cpumask_t tmask; + + cpus_and(tmask, + current->thread.user_cpus_allowed, + mt_fpu_cpumask); + set_cpus_allowed(current, tmask); + current->thread.mflags |= MF_FPUBOUND; + } + } + } +#endif /* CONFIG_MIPS_MT_FPAFF */ } return; case 2: case 3: + die_if_kernel("do_cpu invoked from kernel context!", regs); break; } @@ -780,19 +819,64 @@ asmlinkage void do_watch(struct pt_regs *regs) asmlinkage void do_mcheck(struct pt_regs *regs) { + const int field = 2 * sizeof(unsigned long); + int multi_match = regs->cp0_status & ST0_TS; + show_regs(regs); - dump_tlb_all(); + + if (multi_match) { + printk("Index : %0x\n", read_c0_index()); + printk("Pagemask: %0x\n", read_c0_pagemask()); + printk("EntryHi : %0*lx\n", field, read_c0_entryhi()); + printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0()); + printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1()); + printk("\n"); + dump_tlb_all(); + } + + show_code((unsigned int *) regs->cp0_epc); + /* * Some chips may have other causes of machine check (e.g. SB1 * graduation timer) */ panic("Caught Machine Check exception - %scaused by multiple " "matching entries in the TLB.", - (regs->cp0_status & ST0_TS) ? "" : "not "); + (multi_match) ? "" : "not "); } asmlinkage void do_mt(struct pt_regs *regs) { + int subcode; + + die_if_kernel("MIPS MT Thread exception in kernel", regs); + + subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT) + >> VPECONTROL_EXCPT_SHIFT; + switch (subcode) { + case 0: + printk(KERN_ERR "Thread Underflow\n"); + break; + case 1: + printk(KERN_ERR "Thread Overflow\n"); + break; + case 2: + printk(KERN_ERR "Invalid YIELD Qualifier\n"); + break; + case 3: + printk(KERN_ERR "Gating Storage Exception\n"); + break; + case 4: + printk(KERN_ERR "YIELD Scheduler Exception\n"); + break; + case 5: + printk(KERN_ERR "Gating Storage Schedulier Exception\n"); + break; + default: + printk(KERN_ERR "*** UNKNOWN THREAD EXCEPTION %d ***\n", + subcode); + break; + } die_if_kernel("MIPS MT Thread exception in kernel", regs); force_sig(SIGILL, current); @@ -833,6 +917,7 @@ static inline void parity_protection_init(void) { switch (current_cpu_data.cputype) { case CPU_24K: + case CPU_34K: case CPU_5KC: write_c0_ecc(0x80000000); back_to_back_c0_hazard(); @@ -928,7 +1013,15 @@ void ejtag_exception_handler(struct pt_regs *regs) */ void nmi_exception_handler(struct pt_regs *regs) { +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long dvpret = dvpe(); + bust_spinlocks(1); printk("NMI taken!!!!\n"); + mips_mt_regdump(dvpret); +#else + bust_spinlocks(1); + printk("NMI taken!!!!\n"); +#endif /* CONFIG_MIPS_MT_SMTC */ die("NMI", regs); while(1) ; } @@ -960,27 +1053,29 @@ void *set_except_vector(int n, void *addr) #ifdef CONFIG_CPU_MIPSR2 /* - * Shadow register allocation + * MIPSR2 shadow register set allocation * FIXME: SMP... */ -/* MIPSR2 shadow register sets */ -struct shadow_registers { - spinlock_t sr_lock; /* */ - int sr_supported; /* Number of shadow register sets supported */ - int sr_allocated; /* Bitmap of allocated shadow registers */ +static struct shadow_registers { + /* + * Number of shadow register sets supported + */ + unsigned long sr_supported; + /* + * Bitmap of allocated shadow registers + */ + unsigned long sr_allocated; } shadow_registers; -void mips_srs_init(void) +static void mips_srs_init(void) { #ifdef CONFIG_CPU_MIPSR2_SRS shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; - printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported); -#else - shadow_registers.sr_supported = 1; + printk(KERN_INFO "%d MIPSR2 register sets available\n", + shadow_registers.sr_supported); #endif shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ - spin_lock_init(&shadow_registers.sr_lock); } int mips_srs_max(void) @@ -988,38 +1083,30 @@ int mips_srs_max(void) return shadow_registers.sr_supported; } -int mips_srs_alloc (void) +int mips_srs_alloc(void) { struct shadow_registers *sr = &shadow_registers; - unsigned long flags; int set; - spin_lock_irqsave(&sr->sr_lock, flags); +again: + set = find_first_zero_bit(&sr->sr_allocated, sr->sr_supported); + if (set >= sr->sr_supported) + return -1; - for (set = 0; set < sr->sr_supported; set++) { - if ((sr->sr_allocated & (1 << set)) == 0) { - sr->sr_allocated |= 1 << set; - spin_unlock_irqrestore(&sr->sr_lock, flags); - return set; - } - } + if (test_and_set_bit(set, &sr->sr_allocated)) + goto again; - /* None available */ - spin_unlock_irqrestore(&sr->sr_lock, flags); - return -1; + return set; } -void mips_srs_free (int set) +void mips_srs_free(int set) { struct shadow_registers *sr = &shadow_registers; - unsigned long flags; - spin_lock_irqsave(&sr->sr_lock, flags); - sr->sr_allocated &= ~(1 << set); - spin_unlock_irqrestore(&sr->sr_lock, flags); + clear_bit(set, &sr->sr_allocated); } -void *set_vi_srs_handler (int n, void *addr, int srs) +static void *set_vi_srs_handler(int n, void *addr, int srs) { unsigned long handler; unsigned long old_handler = vi_handlers[n]; @@ -1032,8 +1119,7 @@ void *set_vi_srs_handler (int n, void *addr, int srs) if (addr == NULL) { handler = (unsigned long) do_default_vi; srs = 0; - } - else + } else handler = (unsigned long) addr; vi_handlers[n] = (unsigned long) addr; @@ -1045,8 +1131,7 @@ void *set_vi_srs_handler (int n, void *addr, int srs) if (cpu_has_veic) { if (board_bind_eic_interrupt) board_bind_eic_interrupt (n, srs); - } - else if (cpu_has_vint) { + } else if (cpu_has_vint) { /* SRSMap is only defined if shadow sets are implemented */ if (mips_srs_max() > 1) change_c0_srsmap (0xf << n*4, srs << n*4); @@ -1060,6 +1145,15 @@ void *set_vi_srs_handler (int n, void *addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; +#ifdef CONFIG_MIPS_MT_SMTC + /* + * We need to provide the SMTC vectored interrupt handler + * not only with the address of the handler, but with the + * Status.IM bit to be masked before going there. + */ + extern char except_vec_vi_mori; + const int mori_offset = &except_vec_vi_mori - &except_vec_vi; +#endif /* CONFIG_MIPS_MT_SMTC */ const int handler_len = &except_vec_vi_end - &except_vec_vi; const int lui_offset = &except_vec_vi_lui - &except_vec_vi; const int ori_offset = &except_vec_vi_ori - &except_vec_vi; @@ -1073,6 +1167,12 @@ void *set_vi_srs_handler (int n, void *addr, int srs) } memcpy (b, &except_vec_vi, handler_len); +#ifdef CONFIG_MIPS_MT_SMTC + if (n > 7) + printk("Vector index %d exceeds SMTC maximum\n", n); + w = (u32 *)(b + mori_offset); + *w = (*w & 0xffff0000) | (0x100 << n); +#endif /* CONFIG_MIPS_MT_SMTC */ w = (u32 *)(b + lui_offset); *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff); w = (u32 *)(b + ori_offset); @@ -1095,9 +1195,9 @@ void *set_vi_srs_handler (int n, void *addr, int srs) return (void *)old_handler; } -void *set_vi_handler (int n, void *addr) +void *set_vi_handler(int n, void *addr) { - return set_vi_srs_handler (n, addr, 0); + return set_vi_srs_handler(n, addr, 0); } #endif @@ -1113,8 +1213,29 @@ extern asmlinkage int _restore_fp_context(struct sigcontext *sc); extern asmlinkage int fpu_emulator_save_context(struct sigcontext *sc); extern asmlinkage int fpu_emulator_restore_context(struct sigcontext *sc); +#ifdef CONFIG_SMP +static int smp_save_fp_context(struct sigcontext *sc) +{ + return cpu_has_fpu + ? _save_fp_context(sc) + : fpu_emulator_save_context(sc); +} + +static int smp_restore_fp_context(struct sigcontext *sc) +{ + return cpu_has_fpu + ? _restore_fp_context(sc) + : fpu_emulator_restore_context(sc); +} +#endif + static inline void signal_init(void) { +#ifdef CONFIG_SMP + /* For now just do the cpu_has_fpu check when the functions are invoked */ + save_fp_context = smp_save_fp_context; + restore_fp_context = smp_restore_fp_context; +#else if (cpu_has_fpu) { save_fp_context = _save_fp_context; restore_fp_context = _restore_fp_context; @@ -1122,6 +1243,7 @@ static inline void signal_init(void) save_fp_context = fpu_emulator_save_context; restore_fp_context = fpu_emulator_restore_context; } +#endif } #ifdef CONFIG_MIPS32_COMPAT @@ -1158,6 +1280,20 @@ void __init per_cpu_trap_init(void) { unsigned int cpu = smp_processor_id(); unsigned int status_set = ST0_CU0; +#ifdef CONFIG_MIPS_MT_SMTC + int secondaryTC = 0; + int bootTC = (cpu == 0); + + /* + * Only do per_cpu_trap_init() for first TC of Each VPE. + * Note that this hack assumes that the SMTC init code + * assigns TCs consecutively and in ascending order. + */ + + if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && + ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id)) + secondaryTC = 1; +#endif /* CONFIG_MIPS_MT_SMTC */ /* * Disable coprocessors and select 32-bit or 64-bit addressing @@ -1180,6 +1316,10 @@ void __init per_cpu_trap_init(void) write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */ #endif +#ifdef CONFIG_MIPS_MT_SMTC + if (!secondaryTC) { +#endif /* CONFIG_MIPS_MT_SMTC */ + /* * Interrupt handling. */ @@ -1196,6 +1336,9 @@ void __init per_cpu_trap_init(void) } else set_c0_cause(CAUSEF_IV); } +#ifdef CONFIG_MIPS_MT_SMTC + } +#endif /* CONFIG_MIPS_MT_SMTC */ cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; TLBMISS_HANDLER_SETUP(); @@ -1205,8 +1348,14 @@ void __init per_cpu_trap_init(void) BUG_ON(current->mm); enter_lazy_tlb(&init_mm, current); - cpu_cache_init(); - tlb_init(); +#ifdef CONFIG_MIPS_MT_SMTC + if (bootTC) { +#endif /* CONFIG_MIPS_MT_SMTC */ + cpu_cache_init(); + tlb_init(); +#ifdef CONFIG_MIPS_MT_SMTC + } +#endif /* CONFIG_MIPS_MT_SMTC */ } /* Install CPU exception handler */ @@ -1278,7 +1427,7 @@ void __init trap_init(void) if (cpu_has_veic || cpu_has_vint) { int nvec = cpu_has_veic ? 64 : 8; for (i = 0; i < nvec; i++) - set_vi_handler (i, NULL); + set_vi_handler(i, NULL); } else if (cpu_has_divec) set_handler(0x200, &except_vec4, 0x8); @@ -1297,6 +1446,7 @@ void __init trap_init(void) if (board_be_init) board_be_init(); + set_except_vector(0, handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 2ad0cedf29fe..b84d1f9ce28e 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -2,7 +2,7 @@ #include <asm/asm-offsets.h> #include <asm-generic/vmlinux.lds.h> -#undef mips /* CPP really sucks for this job */ +#undef mips #define mips mips OUTPUT_ARCH(mips) ENTRY(kernel_entry) @@ -151,23 +151,13 @@ SECTIONS /* This is the MIPS specific mdebug section. */ .mdebug : { *(.mdebug) } - /* These are needed for ELF backends which have not yet been - converted to the new style linker. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - /* DWARF debug sections. - Symbols in the .debug DWARF section are relative to the beginning of the - section so we begin .debug at 0. It's not clear yet what needs to happen - for the others. */ - .debug 0 : { *(.debug) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .line 0 : { *(.line) } + + STABS_DEBUG + + DWARF_DEBUG + /* These must appear regardless of . */ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - .comment : { *(.comment) } .note : { *(.note) } } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index ae83b755cf4a..85d7df7b18e1 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -13,7 +13,6 @@ * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * */ /* @@ -27,11 +26,8 @@ * * To load and run, simply cat a SP 'program file' to /dev/vpe1. * i.e cat spapp >/dev/vpe1. - * - * You'll need to have the following device files. - * mknod /dev/vpe0 c 63 0 - * mknod /dev/vpe1 c 63 1 */ + #include <linux/config.h> #include <linux/kernel.h> #include <linux/module.h> @@ -55,6 +51,8 @@ #include <asm/cpu.h> #include <asm/processor.h> #include <asm/system.h> +#include <asm/vpe.h> +#include <asm/kspd.h> typedef void *vpe_handle; @@ -68,6 +66,11 @@ typedef void *vpe_handle; static char module_name[] = "vpe"; static int major; +#ifdef CONFIG_MIPS_APSP_KSPD + static struct kspd_notifications kspd_events; +static int kspd_events_reqd = 0; +#endif + /* grab the likely amount of memory we will need. */ #ifdef CONFIG_MIPS_VPE_LOADER_TOM #define P_SIZE (2 * 1024 * 1024) @@ -76,7 +79,10 @@ static int major; #define P_SIZE (256 * 1024) #endif +extern unsigned long physical_memsize; + #define MAX_VPES 16 +#define VPE_PATH_MAX 256 enum vpe_state { VPE_STATE_UNUSED = 0, @@ -102,6 +108,8 @@ struct vpe { unsigned long len; char *pbuffer; unsigned long plen; + unsigned int uid, gid; + char cwd[VPE_PATH_MAX]; unsigned long __start; @@ -113,6 +121,9 @@ struct vpe { /* shared symbol address */ void *shared_ptr; + + /* the list of who wants to know when something major happens */ + struct list_head notify; }; struct tc { @@ -138,7 +149,7 @@ struct vpecontrol_ { } vpecontrol; static void release_progmem(void *ptr); -static void dump_vpe(struct vpe * v); +/* static __attribute_used__ void dump_vpe(struct vpe * v); */ extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ @@ -146,12 +157,14 @@ struct vpe *get_vpe(int minor) { struct vpe *v; + if (!cpu_has_mipsmt) + return NULL; + list_for_each_entry(v, &vpecontrol.vpe_list, list) { if (v->minor == minor) return v; } - printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor); return NULL; } @@ -165,8 +178,6 @@ struct tc *get_tc(int index) return t; } - printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index); - return NULL; } @@ -179,8 +190,6 @@ struct tc *get_tc_unused(void) return t; } - printk(KERN_DEBUG "VPE: All TC's are in use\n"); - return NULL; } @@ -190,13 +199,13 @@ struct vpe *alloc_vpe(int minor) struct vpe *v; if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { - printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); return NULL; } INIT_LIST_HEAD(&v->tc); list_add_tail(&v->list, &vpecontrol.vpe_list); + INIT_LIST_HEAD(&v->notify); v->minor = minor; return v; } @@ -207,7 +216,6 @@ struct tc *alloc_tc(int index) struct tc *t; if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { - printk(KERN_WARNING "VPE: alloc_tc no mem\n"); return NULL; } @@ -236,20 +244,16 @@ void dump_mtregs(void) printk("config3 0x%lx MT %ld\n", val, (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT); - val = read_c0_mvpconf0(); - printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val, - (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT, - val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); - val = read_c0_mvpcontrol(); printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val, (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT, (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT, (val & MVPCONTROL_EVP)); - val = read_c0_vpeconf0(); - printk("VPEConf0 0x%lx MVP %ld\n", val, - (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT); + val = read_c0_mvpconf0(); + printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val, + (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT, + val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); } /* Find some VPE program space */ @@ -354,9 +358,9 @@ static int apply_r_mips_gprel16(struct module *me, uint32_t *location, } if( (rel > 32768) || (rel < -32768) ) { - printk(KERN_ERR - "apply_r_mips_gprel16: relative address out of range 0x%x %d\n", - rel, rel); + printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: " + "relative address 0x%x out of range of gp register\n", + rel); return -ENOEXEC; } @@ -374,8 +378,8 @@ static int apply_r_mips_pc16(struct module *me, uint32_t *location, rel -= 1; // and one instruction less due to the branch delay slot. if( (rel > 32768) || (rel < -32768) ) { - printk(KERN_ERR - "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); + printk(KERN_DEBUG "VPE loader: " + "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); return -ENOEXEC; } @@ -396,7 +400,8 @@ static int apply_r_mips_26(struct module *me, uint32_t *location, Elf32_Addr v) { if (v % 4) { - printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name); + printk(KERN_DEBUG "VPE loader: apply_r_mips_26 " + " unaligned relocation\n"); return -ENOEXEC; } @@ -459,12 +464,13 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, /* * The value for the HI16 had best be the same. */ - if (v != l->value) { - printk("%d != %d\n", v, l->value); - goto out_danger; + if (v != l->value) { + printk(KERN_DEBUG "VPE loader: " + "apply_r_mips_lo16/hi16: " + "inconsistent value information\n"); + return -ENOEXEC; } - /* * Do the HI16 relocation. Note that we actually don't * need to know anything about the LO16 itself, except @@ -500,11 +506,6 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, *location = insnlo; return 0; - -out_danger: - printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); - - return -ENOEXEC; } static int (*reloc_handlers[]) (struct module *me, uint32_t *location, @@ -518,6 +519,15 @@ static int (*reloc_handlers[]) (struct module *me, uint32_t *location, [R_MIPS_PC16] = apply_r_mips_pc16 }; +static char *rstrs[] = { + [R_MIPS_NONE] = "MIPS_NONE", + [R_MIPS_32] = "MIPS_32", + [R_MIPS_26] = "MIPS_26", + [R_MIPS_HI16] = "MIPS_HI16", + [R_MIPS_LO16] = "MIPS_LO16", + [R_MIPS_GPREL16] = "MIPS_GPREL16", + [R_MIPS_PC16] = "MIPS_PC16" +}; int apply_relocations(Elf32_Shdr *sechdrs, const char *strtab, @@ -552,15 +562,13 @@ int apply_relocations(Elf32_Shdr *sechdrs, res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); if( res ) { - printk(KERN_DEBUG - "relocation error 0x%x sym refer <%s> value 0x%x " - "type 0x%x r_info 0x%x\n", - (unsigned int)location, strtab + sym->st_name, v, - r_info, ELF32_R_TYPE(r_info)); - } - - if (res) + char *r = rstrs[ELF32_R_TYPE(r_info)]; + printk(KERN_WARNING "VPE loader: .text+0x%x " + "relocation type %s for symbol \"%s\" failed\n", + rel[i].r_offset, r ? r : "UNKNOWN", + strtab + sym->st_name); return res; + } } return 0; @@ -576,7 +584,7 @@ void save_gp_address(unsigned int secbase, unsigned int rel) /* Change all symbols so that sh_value encodes the pointer directly. */ -static int simplify_symbols(Elf_Shdr * sechdrs, +static void simplify_symbols(Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, const char *secstrings, @@ -585,18 +593,21 @@ static int simplify_symbols(Elf_Shdr * sechdrs, Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; unsigned long secbase, bssbase = 0; unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); - int ret = 0, size; + int size; /* find the .bss section for COMMON symbols */ for (i = 0; i < nsecs; i++) { - if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) + if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) { bssbase = sechdrs[i].sh_addr; + break; + } } for (i = 1; i < n; i++) { switch (sym[i].st_shndx) { case SHN_COMMON: - /* Allocate space for the symbol in the .bss section. st_value is currently size. + /* Allocate space for the symbol in the .bss section. + st_value is currently size. We want it to have the address of the symbol. */ size = sym[i].st_value; @@ -614,11 +625,9 @@ static int simplify_symbols(Elf_Shdr * sechdrs, break; case SHN_MIPS_SCOMMON: - - printk(KERN_DEBUG - "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n", - strtab + sym[i].st_name, sym[i].st_shndx); - + printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON" + "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name, + sym[i].st_shndx); // .sbss section break; @@ -632,10 +641,7 @@ static int simplify_symbols(Elf_Shdr * sechdrs, sym[i].st_value += secbase; break; } - } - - return ret; } #ifdef DEBUG_ELFLOADER @@ -655,9 +661,26 @@ static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex, static void dump_tc(struct tc *t) { - printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n", - t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt()); - printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart()); + unsigned long val; + + settc(t->index); + printk(KERN_DEBUG "VPE loader: TC index %d targtc %ld " + "TCStatus 0x%lx halt 0x%lx\n", + t->index, read_c0_vpecontrol() & VPECONTROL_TARGTC, + read_tc_c0_tcstatus(), read_tc_c0_tchalt()); + + printk(KERN_DEBUG " tcrestart 0x%lx\n", read_tc_c0_tcrestart()); + printk(KERN_DEBUG " tcbind 0x%lx\n", read_tc_c0_tcbind()); + + val = read_c0_vpeconf0(); + printk(KERN_DEBUG " VPEConf0 0x%lx MVP %ld\n", val, + (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT); + + printk(KERN_DEBUG " c0 status 0x%lx\n", read_vpe_c0_status()); + printk(KERN_DEBUG " c0 cause 0x%lx\n", read_vpe_c0_cause()); + + printk(KERN_DEBUG " c0 badvaddr 0x%lx\n", read_vpe_c0_badvaddr()); + printk(KERN_DEBUG " c0 epc 0x%lx\n", read_vpe_c0_epc()); } static void dump_tclist(void) @@ -672,96 +695,108 @@ static void dump_tclist(void) /* We are prepared so configure and start the VPE... */ int vpe_run(struct vpe * v) { - unsigned long val; + struct vpe_notifications *n; + unsigned long val, dmt_flag; struct tc *t; /* check we are the Master VPE */ val = read_c0_vpeconf0(); if (!(val & VPECONF0_MVP)) { printk(KERN_WARNING - "VPE: only Master VPE's are allowed to configure MT\n"); + "VPE loader: only Master VPE's are allowed to configure MT\n"); return -1; } /* disable MT (using dvpe) */ dvpe(); + if (!list_empty(&v->tc)) { + if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { + printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", + t->index); + return -ENOEXEC; + } + } else { + printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n", + v->minor); + return -ENOEXEC; + } + /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); - if (!list_empty(&v->tc)) { - if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { - printk(KERN_WARNING "VPE: TC %d is already in use.\n", - t->index); - return -ENOEXEC; - } - } else { - printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n", - v->minor); - return -ENOEXEC; - } - settc(t->index); - val = read_vpe_c0_vpeconf0(); - /* should check it is halted, and not activated */ if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) { - printk(KERN_WARNING "VPE: TC %d is already doing something!\n", + printk(KERN_WARNING "VPE loader: TC %d is already doing something!\n", t->index); - dump_tclist(); return -ENOEXEC; } + /* + * Disable multi-threaded execution whilst we activate, clear the + * halt bit and bound the tc to the other VPE... + */ + dmt_flag = dmt(); + /* Write the address we want it to start running from in the TCPC register. */ write_tc_c0_tcrestart((unsigned long)v->__start); - - /* write the sivc_info address to tccontext */ write_tc_c0_tccontext((unsigned long)0); - - /* Set up the XTC bit in vpeconf0 to point at our tc */ - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT)); - - /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */ + /* + * Mark the TC as activated, not interrupt exempt and not dynamically + * allocatable + */ val = read_tc_c0_tcstatus(); val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; write_tc_c0_tcstatus(val); write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); - /* set up VPE1 */ - write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE - /* * The sde-kit passes 'memsize' to __start in $a3, so set something - * here... - * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and + * here... Or set $a3 to zero and define DFLT_STACK_SIZE and * DFLT_HEAP_SIZE when you compile your program */ + mttgpr(7, physical_memsize); + + + /* set up VPE1 */ + /* + * bind the TC to VPE 1 as late as possible so we only have the final + * VPE registers to set up, and so an EJTAG probe can trigger on it + */ + write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor); - mttgpr(7, 0); + /* Set up the XTC bit in vpeconf0 to point at our tc */ + write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) + | (t->index << VPECONF0_XTC_SHIFT)); - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ - write_vpe_c0_config(read_c0_config()); + /* enable this VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); /* clear out any left overs from a previous program */ + write_vpe_c0_status(0); write_vpe_c0_cause(0); /* take system out of configuration state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); - /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */ - write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL)); + /* now safe to re-enable multi-threading */ + emt(dmt_flag); /* set it running */ evpe(EVPE_ENABLE); + list_for_each_entry(n, &v->notify, list) { + n->start(v->minor); + } + return 0; } -static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, +static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, struct module *mod) { @@ -778,26 +813,28 @@ static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, } } + if ( (v->__start == 0) || (v->shared_ptr == NULL)) + return -1; + return 0; } /* - * Allocates a VPE with some program code space(the load address), copies - * the contents of the program (p)buffer performing relocatations/etc, - * free's it when finished. -*/ + * Allocates a VPE with some program code space(the load address), copies the + * contents of the program (p)buffer performing relocatations/etc, free's it + * when finished. + */ int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; long err = 0; char *secstrings, *strtab = NULL; - unsigned int len, i, symindex = 0, strindex = 0; - + unsigned int len, i, symindex = 0, strindex = 0, relocate = 0; struct module mod; // so we can re-use the relocations code memset(&mod, 0, sizeof(struct module)); - strcpy(mod.name, "VPE dummy prog module"); + strcpy(mod.name, "VPE loader"); hdr = (Elf_Ehdr *) v->pbuffer; len = v->plen; @@ -805,16 +842,22 @@ int vpe_elfload(struct vpe * v) /* Sanity checks against insmoding binaries or wrong arch, weird elf version */ if (memcmp(hdr->e_ident, ELFMAG, 4) != 0 - || hdr->e_type != ET_REL || !elf_check_arch(hdr) + || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC) + || !elf_check_arch(hdr) || hdr->e_shentsize != sizeof(*sechdrs)) { printk(KERN_WARNING - "VPE program, wrong arch or weird elf version\n"); + "VPE loader: program wrong arch or weird elf version\n"); return -ENOEXEC; } + if (hdr->e_type == ET_REL) + relocate = 1; + if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) { - printk(KERN_ERR "VPE program length %u truncated\n", len); + printk(KERN_ERR "VPE loader: program length %u truncated\n", + len); + return -ENOEXEC; } @@ -826,82 +869,126 @@ int vpe_elfload(struct vpe * v) /* And these should exist, but gcc whinges if we don't init them */ symindex = strindex = 0; - for (i = 1; i < hdr->e_shnum; i++) { - - if (sechdrs[i].sh_type != SHT_NOBITS - && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) { - printk(KERN_ERR "VPE program length %u truncated\n", - len); - return -ENOEXEC; - } + if (relocate) { + for (i = 1; i < hdr->e_shnum; i++) { + if (sechdrs[i].sh_type != SHT_NOBITS + && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) { + printk(KERN_ERR "VPE program length %u truncated\n", + len); + return -ENOEXEC; + } - /* Mark all sections sh_addr with their address in the - temporary image. */ - sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; + /* Mark all sections sh_addr with their address in the + temporary image. */ + sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; - /* Internal symbols and strings. */ - if (sechdrs[i].sh_type == SHT_SYMTAB) { - symindex = i; - strindex = sechdrs[i].sh_link; - strtab = (char *)hdr + sechdrs[strindex].sh_offset; + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + sechdrs[strindex].sh_offset; + } } + layout_sections(&mod, hdr, sechdrs, secstrings); } - layout_sections(&mod, hdr, sechdrs, secstrings); - v->load_addr = alloc_progmem(mod.core_size); memset(v->load_addr, 0, mod.core_size); - printk("VPE elf_loader: loading to %p\n", v->load_addr); + printk("VPE loader: loading to %p\n", v->load_addr); - for (i = 0; i < hdr->e_shnum; i++) { - void *dest; + if (relocate) { + for (i = 0; i < hdr->e_shnum; i++) { + void *dest; - if (!(sechdrs[i].sh_flags & SHF_ALLOC)) - continue; + if (!(sechdrs[i].sh_flags & SHF_ALLOC)) + continue; - dest = v->load_addr + sechdrs[i].sh_entsize; + dest = v->load_addr + sechdrs[i].sh_entsize; - if (sechdrs[i].sh_type != SHT_NOBITS) - memcpy(dest, (void *)sechdrs[i].sh_addr, - sechdrs[i].sh_size); - /* Update sh_addr to point to copy in image. */ - sechdrs[i].sh_addr = (unsigned long)dest; - } + if (sechdrs[i].sh_type != SHT_NOBITS) + memcpy(dest, (void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size); + /* Update sh_addr to point to copy in image. */ + sechdrs[i].sh_addr = (unsigned long)dest; - /* Fix up syms, so that st_value is a pointer to location. */ - err = - simplify_symbols(sechdrs, symindex, strtab, secstrings, - hdr->e_shnum, &mod); - if (err < 0) { - printk(KERN_WARNING "VPE: unable to simplify symbols\n"); - goto cleanup; - } + printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n", + secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr); + } - /* Now do relocations. */ - for (i = 1; i < hdr->e_shnum; i++) { - const char *strtab = (char *)sechdrs[strindex].sh_addr; - unsigned int info = sechdrs[i].sh_info; - - /* Not a valid relocation section? */ - if (info >= hdr->e_shnum) - continue; - - /* Don't bother with non-allocated sections */ - if (!(sechdrs[info].sh_flags & SHF_ALLOC)) - continue; - - if (sechdrs[i].sh_type == SHT_REL) - err = - apply_relocations(sechdrs, strtab, symindex, i, &mod); - else if (sechdrs[i].sh_type == SHT_RELA) - err = apply_relocate_add(sechdrs, strtab, symindex, i, - &mod); - if (err < 0) { - printk(KERN_WARNING - "vpe_elfload: error in relocations err %ld\n", - err); - goto cleanup; + /* Fix up syms, so that st_value is a pointer to location. */ + simplify_symbols(sechdrs, symindex, strtab, secstrings, + hdr->e_shnum, &mod); + + /* Now do relocations. */ + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + /* Don't bother with non-allocated sections */ + if (!(sechdrs[info].sh_flags & SHF_ALLOC)) + continue; + + if (sechdrs[i].sh_type == SHT_REL) + err = apply_relocations(sechdrs, strtab, symindex, i, + &mod); + else if (sechdrs[i].sh_type == SHT_RELA) + err = apply_relocate_add(sechdrs, strtab, symindex, i, + &mod); + if (err < 0) + return err; + + } + } else { + for (i = 0; i < hdr->e_shnum; i++) { + + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + sechdrs[strindex].sh_offset; + + /* mark the symtab's address for when we try to find the + magic symbols */ + sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; + } + + /* filter sections we dont want in the final image */ + if (!(sechdrs[i].sh_flags & SHF_ALLOC) || + (sechdrs[i].sh_type == SHT_MIPS_REGINFO)) { + printk( KERN_DEBUG " ignoring section, " + "name %s type %x address 0x%x \n", + secstrings + sechdrs[i].sh_name, + sechdrs[i].sh_type, sechdrs[i].sh_addr); + continue; + } + + if (sechdrs[i].sh_addr < (unsigned int)v->load_addr) { + printk( KERN_WARNING "VPE loader: " + "fully linked image has invalid section, " + "name %s type %x address 0x%x, before load " + "address of 0x%x\n", + secstrings + sechdrs[i].sh_name, + sechdrs[i].sh_type, sechdrs[i].sh_addr, + (unsigned int)v->load_addr); + return -ENOEXEC; + } + + printk(KERN_DEBUG " copying section sh_name %s, sh_addr 0x%x " + "size 0x%x0 from x%p\n", + secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr, + sechdrs[i].sh_size, hdr + sechdrs[i].sh_offset); + + if (sechdrs[i].sh_type != SHT_NOBITS) + memcpy((void *)sechdrs[i].sh_addr, + (char *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size); + else + memset((void *)sechdrs[i].sh_addr, 0, sechdrs[i].sh_size); } } @@ -910,71 +997,104 @@ int vpe_elfload(struct vpe * v) (unsigned long)v->load_addr + v->len); if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) { + if (v->__start == 0) { + printk(KERN_WARNING "VPE loader: program does not contain " + "a __start symbol\n"); + return -ENOEXEC; + } - printk(KERN_WARNING - "VPE: program doesn't contain __start or vpe_shared symbols\n"); - err = -ENOEXEC; + if (v->shared_ptr == NULL) + printk(KERN_WARNING "VPE loader: " + "program does not contain vpe_shared symbol.\n" + " Unable to use AMVP (AP/SP) facilities.\n"); } printk(" elf loaded\n"); - -cleanup: - return err; + return 0; } -static void dump_vpe(struct vpe * v) +__attribute_used__ void dump_vpe(struct vpe * v) { struct tc *t; + settc(v->minor); + printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol()); printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0()); - list_for_each_entry(t, &vpecontrol.tc_list, list) { + list_for_each_entry(t, &vpecontrol.tc_list, list) dump_tc(t); - } } -/* checks for VPE is unused and gets ready to load program */ +static void cleanup_tc(struct tc *tc) +{ + int tmp; + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(tc->index); + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + + /* bind it to anything other than VPE1 */ + write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE + + clear_c0_mvpcontrol(MVPCONTROL_VPC); +} + +static int getcwd(char *buff, int size) +{ + mm_segment_t old_fs; + int ret; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + + ret = sys_getcwd(buff,size); + + set_fs(old_fs); + + return ret; +} + +/* checks VPE is unused and gets ready to load program */ static int vpe_open(struct inode *inode, struct file *filp) { - int minor; + int minor, ret; struct vpe *v; + struct vpe_notifications *not; /* assume only 1 device at the mo. */ - if ((minor = MINOR(inode->i_rdev)) != 1) { - printk(KERN_WARNING "VPE: only vpe1 is supported\n"); + if ((minor = iminor(inode)) != 1) { + printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); return -ENODEV; } if ((v = get_vpe(minor)) == NULL) { - printk(KERN_WARNING "VPE: unable to get vpe\n"); + printk(KERN_WARNING "VPE loader: unable to get vpe\n"); return -ENODEV; } if (v->state != VPE_STATE_UNUSED) { - unsigned long tmp; - struct tc *t; - - printk(KERN_WARNING "VPE: device %d already in use\n", minor); - dvpe(); - dump_vpe(v); - - printk(KERN_WARNING "VPE: re-initialising %d\n", minor); - - release_progmem(v->load_addr); - t = get_tc(minor); - settc(minor); - tmp = read_tc_c0_tcstatus(); + printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n"); - /* mark not allocated and not dynamically allocatable */ - tmp &= ~(TCSTATUS_A | TCSTATUS_DA); - tmp |= TCSTATUS_IXMT; /* interrupt exempt */ - write_tc_c0_tcstatus(tmp); + dump_tc(get_tc(minor)); - write_tc_c0_tchalt(TCHALT_H); + list_for_each_entry(not, &v->notify, list) { + not->stop(minor); + } + release_progmem(v->load_addr); + cleanup_tc(get_tc(minor)); } // allocate it so when we get write ops we know it's expected. @@ -986,6 +1106,24 @@ static int vpe_open(struct inode *inode, struct file *filp) v->load_addr = NULL; v->len = 0; + v->uid = filp->f_uid; + v->gid = filp->f_gid; + +#ifdef CONFIG_MIPS_APSP_KSPD + /* get kspd to tell us when a syscall_exit happens */ + if (!kspd_events_reqd) { + kspd_notify(&kspd_events); + kspd_events_reqd++; + } +#endif + + v->cwd[0] = 0; + ret = getcwd(v->cwd, VPE_PATH_MAX); + if (ret < 0) + printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret); + + v->shared_ptr = NULL; + v->__start = 0; return 0; } @@ -995,7 +1133,7 @@ static int vpe_release(struct inode *inode, struct file *filp) struct vpe *v; Elf_Ehdr *hdr; - minor = MINOR(inode->i_rdev); + minor = iminor(inode); if ((v = get_vpe(minor)) == NULL) return -ENODEV; @@ -1006,14 +1144,22 @@ static int vpe_release(struct inode *inode, struct file *filp) if (vpe_elfload(v) >= 0) vpe_run(v); else { - printk(KERN_WARNING "VPE: ELF load failed.\n"); + printk(KERN_WARNING "VPE loader: ELF load failed.\n"); ret = -ENOEXEC; } } else { - printk(KERN_WARNING "VPE: only elf files are supported\n"); + printk(KERN_WARNING "VPE loader: only elf files are supported\n"); ret = -ENOEXEC; } + /* It's good to be able to run the SP and if it chokes have a look at + the /dev/rt?. But if we reset the pointer to the shared struct we + loose what has happened. So perhaps if garbage is sent to the vpe + device, use it as a trigger for the reset. Hopefully a nice + executable will be along shortly. */ + if (ret < 0) + v->shared_ptr = NULL; + // cleanup any temp buffers if (v->pbuffer) vfree(v->pbuffer); @@ -1028,26 +1174,24 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, size_t ret = count; struct vpe *v; - minor = MINOR(file->f_dentry->d_inode->i_rdev); + minor = iminor(file->f_dentry->d_inode); if ((v = get_vpe(minor)) == NULL) return -ENODEV; if (v->pbuffer == NULL) { - printk(KERN_ERR "vpe_write: no pbuffer\n"); + printk(KERN_ERR "VPE loader: no buffer for program\n"); return -ENOMEM; } if ((count + v->len) > v->plen) { printk(KERN_WARNING - "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n"); + "VPE loader: elf size too big. Perhaps strip uneeded symbols\n"); return -ENOMEM; } count -= copy_from_user(v->pbuffer + v->len, buffer, count); - if (!count) { - printk("vpe_write: copy_to_user failed\n"); + if (!count) return -EFAULT; - } v->len += count; return ret; @@ -1149,16 +1293,70 @@ void *vpe_get_shared(int index) { struct vpe *v; - if ((v = get_vpe(index)) == NULL) { - printk(KERN_WARNING "vpe: invalid vpe index %d\n", index); + if ((v = get_vpe(index)) == NULL) return NULL; - } return v->shared_ptr; } EXPORT_SYMBOL(vpe_get_shared); +int vpe_getuid(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return -1; + + return v->uid; +} + +EXPORT_SYMBOL(vpe_getuid); + +int vpe_getgid(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return -1; + + return v->gid; +} + +EXPORT_SYMBOL(vpe_getgid); + +int vpe_notify(int index, struct vpe_notifications *notify) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return -1; + + list_add(¬ify->list, &v->notify); + return 0; +} + +EXPORT_SYMBOL(vpe_notify); + +char *vpe_getcwd(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) + return NULL; + + return v->cwd; +} + +EXPORT_SYMBOL(vpe_getcwd); + +#ifdef CONFIG_MIPS_APSP_KSPD +static void kspd_sp_exit( int sp_id) +{ + cleanup_tc(get_tc(sp_id)); +} +#endif + static int __init vpe_module_init(void) { struct vpe *v = NULL; @@ -1201,7 +1399,8 @@ static int __init vpe_module_init(void) return -ENODEV; } - list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */ + /* add the tc to the list of this vpe's tc's. */ + list_add(&t->tc, &v->tc); /* deactivate all but vpe0 */ if (i != 0) { @@ -1222,10 +1421,12 @@ static int __init vpe_module_init(void) ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + /* + * Set config to be the same as vpe0, + * particularly kseg0 coherency alg + */ write_vpe_c0_config(read_c0_config()); } - } /* TC's */ @@ -1234,23 +1435,28 @@ static int __init vpe_module_init(void) if (i != 0) { unsigned long tmp; - /* tc 0 will of course be running.... */ - if (i == 0) - t->state = TC_STATE_RUNNING; - settc(i); - /* bind a TC to each VPE, May as well put all excess TC's - on the last VPE */ - if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1)) - write_tc_c0_tcbind(read_tc_c0_tcbind() | - ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); - else - write_tc_c0_tcbind(read_tc_c0_tcbind() | i); + /* Any TC that is bound to VPE0 gets left as is - in case + we are running SMTC on VPE0. A TC that is bound to any + other VPE gets bound to VPE0, ideally I'd like to make + it homeless but it doesn't appear to let me bind a TC + to a non-existent VPE. Which is perfectly reasonable. + + The (un)bound state is visible to an EJTAG probe so may + notify GDB... + */ + + if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) { + /* tc is bound >vpe0 */ + write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE); + + t->pvpe = get_vpe(0); /* set the parent vpe */ + } tmp = read_tc_c0_tcstatus(); - /* mark not allocated and not dynamically allocatable */ + /* mark not activated and not dynamically allocatable */ tmp &= ~(TCSTATUS_A | TCSTATUS_DA); tmp |= TCSTATUS_IXMT; /* interrupt exempt */ write_tc_c0_tcstatus(tmp); @@ -1262,6 +1468,9 @@ static int __init vpe_module_init(void) /* release config state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); +#ifdef CONFIG_MIPS_APSP_KSPD + kspd_events.kspd_sp_exit = kspd_sp_exit; +#endif return 0; } @@ -1281,5 +1490,5 @@ static void __exit vpe_module_exit(void) module_init(vpe_module_init); module_exit(vpe_module_exit); MODULE_DESCRIPTION("MIPS VPE Loader"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile index 0d5aec436725..99f5046fdf49 100644 --- a/arch/mips/lasat/Makefile +++ b/arch/mips/lasat/Makefile @@ -3,7 +3,7 @@ # obj-y += reset.o setup.o prom.o lasat_board.o \ - at93c.o interrupt.o lasatIRQ.o + at93c.o interrupt.o obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o obj-$(CONFIG_DS1603) += ds1603.o diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index 852a41901a5e..2d3472b21ebb 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -27,14 +27,13 @@ #include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/lasat/lasatint.h> +#include <asm/time.h> #include <asm/gdb-stub.h> static volatile int *lasat_int_status = NULL; static volatile int *lasat_int_mask = NULL; static volatile int lasat_int_mask_shift; -extern asmlinkage void lasatIRQ(void); - void disable_lasat_irq(unsigned int irq_nr) { unsigned long flags; @@ -109,11 +108,17 @@ static unsigned long get_int_status_200(void) return int_status; } -void lasat_hw0_irqdispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { unsigned long int_status; + unsigned int cause = read_c0_cause(); int irq; + if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */ + ll_timer_interrupt(7, regs); + return; + } + int_status = get_int_status(); /* if int_status == 0, then the interrupt has already been cleared */ @@ -147,9 +152,6 @@ void __init arch_init_irq(void) panic("arch_init_irq: mips_machtype incorrect"); } - /* Now safe to set the exception vector. */ - set_except_vector(0, lasatIRQ); - for (i = 0; i <= LASATINT_END; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = 0; diff --git a/arch/mips/lasat/lasatIRQ.S b/arch/mips/lasat/lasatIRQ.S deleted file mode 100644 index 2a2b0d056561..000000000000 --- a/arch/mips/lasat/lasatIRQ.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Interrupt exception dispatch code. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .text - .set noreorder - .align 5 - NESTED(lasatIRQ, PT_SIZE, sp) - .set noat - SAVE_ALL - CLI - .set at - .set noreorder - - mfc0 s0, CP0_CAUSE # get irq mask - - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt - - /* Wheee, a timer interrupt. */ - li a0, 7 - jal ll_timer_interrupt - move a1, sp - - j ret_from_irq - nop - -1: - /* Wheee, combined hardware level zero interrupt. */ - jal lasat_hw0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - /* - * Here by mistake? This is possible, what can happen is that by the - * time we take the exception the IRQ pin goes low, so just leave if - * this is the case. - */ - move a1,s0 - mfc0 a1, CP0_EPC - - j ret_from_irq - nop - END(lasatIRQ) diff --git a/arch/mips/math-emu/dp_fint.c b/arch/mips/math-emu/dp_fint.c index a1962eb460f8..39a71de16f47 100644 --- a/arch/mips/math-emu/dp_fint.c +++ b/arch/mips/math-emu/dp_fint.c @@ -29,7 +29,9 @@ ieee754dp ieee754dp_fint(int x) { - COMPXDP; + u64 xm; + int xe; + int xs; CLEARCX; diff --git a/arch/mips/math-emu/dp_flong.c b/arch/mips/math-emu/dp_flong.c index eae90a866aa1..f08f223e488a 100644 --- a/arch/mips/math-emu/dp_flong.c +++ b/arch/mips/math-emu/dp_flong.c @@ -29,7 +29,9 @@ ieee754dp ieee754dp_flong(s64 x) { - COMPXDP; + u64 xm; + int xe; + int xs; CLEARCX; diff --git a/arch/mips/math-emu/sp_fint.c b/arch/mips/math-emu/sp_fint.c index 7aac13afb09a..e88e125e01c2 100644 --- a/arch/mips/math-emu/sp_fint.c +++ b/arch/mips/math-emu/sp_fint.c @@ -29,7 +29,9 @@ ieee754sp ieee754sp_fint(int x) { - COMPXSP; + unsigned xm; + int xe; + int xs; CLEARCX; diff --git a/arch/mips/math-emu/sp_flong.c b/arch/mips/math-emu/sp_flong.c index 3d6c1d11c178..26d6919a269a 100644 --- a/arch/mips/math-emu/sp_flong.c +++ b/arch/mips/math-emu/sp_flong.c @@ -29,7 +29,9 @@ ieee754sp ieee754sp_flong(s64 x) { - COMPXDP; /* <--- need 64-bit mantissa temp */ + u64 xm; /* <--- need 64-bit mantissa temp */ + int xe; + int xs; CLEARCX; diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index bc0ebc69bfb3..db53950b7cfb 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -39,8 +39,6 @@ static struct atlas_ictrl_regs *atlas_hw0_icregs; -extern asmlinkage void mipsIRQ(void); - #if 0 #define DEBUG_INT(x...) printk(x) #else @@ -98,7 +96,7 @@ static inline int ls1bit32(unsigned int x) return b; } -void atlas_hw0_irqdispatch(struct pt_regs *regs) +static inline void atlas_hw0_irqdispatch(struct pt_regs *regs) { unsigned long int_status; int irq; @@ -116,6 +114,91 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs) do_IRQ(irq, regs); } +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +/* + * IRQs on the Atlas board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == MIPSCPU_INT_ATLAS) + atlas_hw0_irqdispatch(regs); + else if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} + void __init arch_init_irq(void) { int i; @@ -128,9 +211,6 @@ void __init arch_init_irq(void) */ atlas_hw0_icregs->intrsten = 0xffffffff; - /* Now safe to set the exception vector. */ - set_except_vector(0, mipsIRQ); - for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = 0; diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile index b21bc6887fa8..be47c1c2bc80 100644 --- a/arch/mips/mips-boards/generic/Makefile +++ b/arch/mips/mips-boards/generic/Makefile @@ -18,8 +18,8 @@ # Makefile for the MIPS boards generic routines under Linux. # -obj-y := mipsIRQ.o reset.o display.o init.o memory.o \ - printf.o cmdline.o time.o +obj-y := reset.o display.o init.o memory.o printf.o \ + cmdline.o time.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += gdb_hook.o diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c index 91a2ccbe3730..6a1854de4579 100644 --- a/arch/mips/mips-boards/generic/gdb_hook.c +++ b/arch/mips/mips-boards/generic/gdb_hook.c @@ -25,7 +25,7 @@ #include <asm/serial.h> #include <asm/io.h> -static struct serial_state rs_table[RS_TABLE_SIZE] = { +static struct serial_state rs_table[] = { SERIAL_PORT_DFNS /* Defined in serial.h */ }; diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index eab5a705e989..df4e94735604 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -220,7 +220,6 @@ void __init kgdb_config (void) generic_putDebugChar (*s++); } - kgdb_enabled = 1; /* Breakpoint is invoked after interrupts are initialised */ } } @@ -338,6 +337,7 @@ void __init prom_init(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index 32c9210373ac..bc4d093685bb 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -22,10 +22,12 @@ #include <linux/init.h> #include <linux/mm.h> #include <linux/bootmem.h> +#include <linux/pfn.h> #include <linux/string.h> #include <asm/bootinfo.h> #include <asm/page.h> +#include <asm/sections.h> #include <asm/mips-boards/prom.h> @@ -46,9 +48,6 @@ static char *mtypes[3] = { }; #endif -/* References to section boundaries */ -extern char _end; - struct prom_pmemblock * __init prom_getmdesc(void) { char *memsize_str; @@ -106,10 +105,10 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[3].type = yamon_dontuse; mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[3].base; + mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PAGE_ALIGN(&_end)); + mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); mdesc[4].size = memsize - mdesc[4].base; return &mdesc[0]; diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S deleted file mode 100644 index ddd5c73a2971..000000000000 --- a/arch/mips/mips-boards/generic/mipsIRQ.S +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Interrupt exception dispatch code. - * - */ -#include <linux/config.h> - -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -#ifdef CONFIG_MIPS_ATLAS -#include <asm/mips-boards/atlasint.h> -#define CASCADE_IRQ MIPSCPU_INT_ATLAS -#define CASCADE_DISPATCH atlas_hw0_irqdispatch -#endif -#ifdef CONFIG_MIPS_MALTA -#include <asm/mips-boards/maltaint.h> -#define CASCADE_IRQ MIPSCPU_INT_I8259A -#define CASCADE_DISPATCH malta_hw0_irqdispatch -#endif -#ifdef CONFIG_MIPS_SEAD -#include <asm/mips-boards/seadint.h> -#endif - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the MIPS board look basically (barring software - * IRQs which we don't use at all and all external interrupt sources are - * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * Note: On the SEAD board thing are a little bit different. - * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired - * wired to UART1. - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(mipsIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 s0, CP0_CAUSE # get irq bits - mfc0 s1, CP0_STATUS # get irq mask - andi s0, ST0_IM # CAUSE.CE may be non-zero! - and s0, s1 - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 - clz a0, s0 - .set mips0 - negu a0 - addu a0, 31-CAUSEB_IP - bltz a0, spurious -#else - beqz s0, spurious - li a0, 7 - - and t0, s0, 0xf000 - sltiu t0, t0, 1 - sll t0, 2 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0xc000 - sltiu t0, t0, 1 - sll t0, 1 - subu a0, t0 - sll s0, t0 - - and t0, s0, 0x8000 - sltiu t0, t0, 1 - # sll t0, 0 - subu a0, t0 - # sll s0, t0 -#endif - -#ifdef CASCADE_IRQ - li a1, CASCADE_IRQ - bne a0, a1, 1f - addu a0, MIPSCPU_INT_BASE - - jal CASCADE_DISPATCH - move a0, sp - - j ret_from_irq - nop -1: -#else - addu a0, MIPSCPU_INT_BASE -#endif - - jal do_IRQ - move a1, sp - - j ret_from_irq - nop - - -spurious: - j spurious_interrupt - nop - END(mipsIRQ) diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c index 1f6f9df74ab2..9337f6c8873a 100644 --- a/arch/mips/mips-boards/generic/pci.c +++ b/arch/mips/mips-boards/generic/pci.c @@ -198,6 +198,7 @@ void __init mips_pcibios_init(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: /* Set up resource ranges from the controller's registers. */ MSC_READ(MSC01_PCI_SC2PMBASL, start); diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 93f3bf2c2b22..a9f6124b3a22 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -30,6 +30,7 @@ #include <linux/mc146818rtc.h> #include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> #include <asm/ptrace.h> #include <asm/hardirq.h> #include <asm/irq.h> @@ -50,16 +51,23 @@ unsigned long cpu_khz; static char display_string[] = " LINUX ON ATLAS "; #endif #if defined(CONFIG_MIPS_MALTA) +#if defined(CONFIG_MIPS_MT_SMTC) +static char display_string[] = " SMTC LINUX ON MALTA "; +#else static char display_string[] = " LINUX ON MALTA "; +#endif /* CONFIG_MIPS_MT_SMTC */ #endif #if defined(CONFIG_MIPS_SEAD) static char display_string[] = " LINUX ON SEAD "; #endif -static unsigned int display_count = 0; +static unsigned int display_count; #define MAX_DISPLAY_COUNT (sizeof(display_string) - 8) -static unsigned int timer_tick_count=0; +#define CPUCTR_IMASKBIT (0x100 << MIPSCPU_INT_CPUCTR) + +static unsigned int timer_tick_count; static int mips_cpu_timer_irq; +extern void smtc_timer_broadcast(int); static inline void scroll_display_message(void) { @@ -75,15 +83,55 @@ static void mips_timer_dispatch (struct pt_regs *regs) do_IRQ (mips_cpu_timer_irq, regs); } +/* + * Redeclare until I get around mopping the timer code insanity on MIPS. + */ extern int null_perf_irq(struct pt_regs *regs); extern int (*perf_irq)(struct pt_regs *regs); irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - int r2 = cpu_has_mips_r2; int cpu = smp_processor_id(); + int r2 = cpu_has_mips_r2; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * In an SMTC system, one Count/Compare set exists per VPE. + * Which TC within a VPE gets the interrupt is essentially + * random - we only know that it shouldn't be one with + * IXMT set. Whichever TC gets the interrupt needs to + * send special interprocessor interrupts to the other + * TCs to make sure that they schedule, etc. + * + * That code is specific to the SMTC kernel, not to + * the a particular platform, so it's invoked from + * the general MIPS timer_interrupt routine. + */ + + /* + * DVPE is necessary so long as cross-VPE interrupts + * are done via read-modify-write of Cause register. + */ + int vpflags = dvpe(); + write_c0_compare (read_c0_count() - 1); + clear_c0_cause(CPUCTR_IMASKBIT); + evpe(vpflags); + + if (cpu_data[cpu].vpe_id == 0) { + timer_interrupt(irq, dev_id, regs); + scroll_display_message(); + } else + write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); + smtc_timer_broadcast(cpu_data[cpu].vpe_id); + if (cpu != 0) + /* + * Other CPUs should do profiling and process accounting + */ + local_timer_interrupt(irq, dev_id, regs); + +#else /* CONFIG_MIPS_MT_SMTC */ if (cpu == 0) { /* * CPU 0 handles the global timer interrupt job and process @@ -107,12 +155,14 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * More support needs to be added to kernel/time for * counter/timer interrupts on multiple CPU's */ - write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ)); + write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ)); + /* - * other CPUs should do profiling and process accounting + * Other CPUs should do profiling and process accounting */ - local_timer_interrupt (irq, dev_id, regs); + local_timer_interrupt(irq, dev_id, regs); } +#endif /* CONFIG_MIPS_MT_SMTC */ out: return IRQ_HANDLED; @@ -126,7 +176,7 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#ifdef CONFIG_MIPS_SEAD +#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM) /* * The SEAD board doesn't have a real time clock, so we can't * really calculate the timer frequency @@ -211,7 +261,11 @@ void __init mips_timer_setup(struct irqaction *irq) /* we are using the cpu counter for timer interrupts */ irq->handler = mips_timer_interrupt; /* we use our own handler */ +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc(mips_cpu_timer_irq, irq, CPUCTR_IMASKBIT); +#else setup_irq(mips_cpu_timer_irq, irq); +#endif /* CONFIG_MIPS_MT_SMTC */ #ifdef CONFIG_SMP /* irq_desc(riptor) is a global resource, when the interrupt overlaps diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index fd4c143c0e2f..77ee5c6d33c1 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -20,3 +20,4 @@ # obj-y := malta_int.o malta_setup.o +obj-$(CONFIG_SMP) += malta_smp.o diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index d06dc5ad6c9e..7cc0ba4f553a 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -40,7 +40,6 @@ #include <asm/mips-boards/msc01_pci.h> #include <asm/msc01_ic.h> -extern asmlinkage void mipsIRQ(void); extern void mips_timer_interrupt(void); static DEFINE_SPINLOCK(mips_irq_lock); @@ -58,6 +57,7 @@ static inline int mips_pcibios_iack(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: MSC_READ(MSC01_PCI_IACK, irq); irq &= 0xff; @@ -114,13 +114,14 @@ static inline int get_int(void) return irq; } -void malta_hw0_irqdispatch(struct pt_regs *regs) +static void malta_hw0_irqdispatch(struct pt_regs *regs) { int irq; irq = get_int(); - if (irq < 0) + if (irq < 0) { return; /* interrupt has already been cleared */ + } do_IRQ(MALTA_INT_BASE+irq, regs); } @@ -143,6 +144,7 @@ void corehi_irqdispatch(struct pt_regs *regs) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: ll_msc_irq(regs); break; @@ -182,6 +184,92 @@ void corehi_irqdispatch(struct pt_regs *regs) die("CoreHi interrupt", regs); } +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +/* + * IRQs on the Malta board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == MIPSCPU_INT_I8259A) + malta_hw0_irqdispatch(regs); + else if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} + static struct irqaction i8259irq = { .handler = no_action, .name = "XT-PIC cascade" @@ -214,7 +302,6 @@ int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t); void __init arch_init_irq(void) { - set_except_vector(0, mipsIRQ); init_i8259_irqs(); if (!cpu_has_veic) @@ -224,6 +311,7 @@ void __init arch_init_irq(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: if (cpu_has_veic) init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); @@ -240,12 +328,17 @@ void __init arch_init_irq(void) else if (cpu_has_vint) { set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch); - +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq, + (0x100 << MIPSCPU_INT_I8259A)); + setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); +#else /* Not SMTC */ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); +#endif /* CONFIG_MIPS_MT_SMTC */ } else { - set_except_vector(0, mipsIRQ); setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); } diff --git a/arch/mips/mips-boards/malta/malta_smp.c b/arch/mips/mips-boards/malta/malta_smp.c new file mode 100644 index 000000000000..6c6c8eeedbce --- /dev/null +++ b/arch/mips/mips-boards/malta/malta_smp.c @@ -0,0 +1,128 @@ +/* + * Malta Platform-specific hooks for SMP operation + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> + +#include <asm/atomic.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/smtc_ipi.h> +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* VPE/SMP Prototype implements platform interfaces directly */ +#if !defined(CONFIG_MIPS_MT_SMP) + +/* + * Cause the specified action to be performed on a targeted "CPU" + */ + +void core_send_ipi(int cpu, unsigned int action) +{ +/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ +#ifdef CONFIG_MIPS_MT_SMTC + smtc_send_ipi(cpu, LINUX_SMP_IPI, action); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map + */ + +void __init prom_build_cpu_map(void) +{ + int nextslot; + + /* + * As of November, 2004, MIPSsim only simulates one core + * at a time. However, that core may be a MIPS MT core + * with multiple virtual processors and thread contexts. + */ + + if (read_c0_config3() & (1<<2)) { + nextslot = mipsmt_build_cpu_map(1); + } +} + +/* + * Platform "CPU" startup hook + */ + +void prom_boot_secondary(int cpu, struct task_struct *idle) +{ +#ifdef CONFIG_MIPS_MT_SMTC + smtc_boot_secondary(cpu, idle); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Post-config but pre-boot cleanup entry point + */ + +void prom_init_secondary(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_init_secondary(void); + int myvpe; + + /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ + myvpe = read_c0_tcbind() & TCBIND_CURVPE; + if (myvpe != 0) { + /* Ideally, this should be done only once per VPE, but... */ + clear_c0_status(STATUSF_IP2); + set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3 + | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 + | STATUSF_IP7); + } + + smtc_init_secondary(); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Platform SMP pre-initialization + * + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. + */ + +void plat_smp_setup(void) +{ + if (read_c0_config3() & (1<<2)) + mipsmt_build_cpu_map(0); +} + +void __init plat_prepare_cpus(unsigned int max_cpus) +{ + if (read_c0_config3() & (1<<2)) + mipsmt_prepare_cpus(); +} + +/* + * SMP initialization finalization entry point + */ + +void prom_smp_finish(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + smtc_smp_finish(); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Hook for after all CPUs are online + */ + +void prom_cpus_done(void) +{ +} + +#endif /* CONFIG_MIPS32R2_MT_SMP */ diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index 90fda0d9915f..9168d934c661 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -24,16 +24,94 @@ #include <linux/irq.h> #include <asm/irq_cpu.h> +#include <asm/mipsregs.h> #include <asm/system.h> #include <asm/mips-boards/seadint.h> -extern asmlinkage void mipsIRQ(void); +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +/* + * IRQs on the SEAD board look basically are combined together on hardware + * interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 UART0 (hw0) + * 3 UART1 (hw1) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq >= 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} void __init arch_init_irq(void) { mips_cpu_irq_init(MIPSCPU_INT_BASE); - - /* Now safe to set the exception vector. */ - set_except_vector(0, mipsIRQ); } diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c deleted file mode 100644 index fef9fbd8e710..000000000000 --- a/arch/mips/mips-boards/sim/cmdline.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include <linux/init.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)])) - -char arcs_cmdline[CL_SIZE]; - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c index 9df37c6fca36..c63021a5dc6c 100644 --- a/arch/mips/mips-boards/sim/sim_cmdline.c +++ b/arch/mips/mips-boards/sim/sim_cmdline.c @@ -26,8 +26,10 @@ char * __init prom_getcmdline(void) return arcs_cmdline; } - void __init prom_init_cmdline(void) { - /* nothing to do */ + char *cp; + cp = arcs_cmdline; + /* Get boot line from environment? */ + *cp = '\0'; } diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c index a4d0a2c05031..2c15c8efec4e 100644 --- a/arch/mips/mips-boards/sim/sim_int.c +++ b/arch/mips/mips-boards/sim/sim_int.c @@ -25,17 +25,71 @@ extern void mips_cpu_irq_init(int); -extern asmlinkage void simIRQ(void); +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; -asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs) + t0 = s0 & 0x8000; + t0 = t0 < 1; + //t0 = t0 << 2; + a0 = a0 - t0; + //s0 = s0 << t0; + + return a0; +#endif +} + +static inline void sim_hw0_irqdispatch(struct pt_regs *regs) { do_IRQ(2, regs); } -void __init arch_init_irq(void) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { - /* Now safe to set the exception vector. */ - set_except_vector(0, simIRQ); + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq, regs); + else + spurious_interrupt(regs); +} + +void __init arch_init_irq(void) +{ mips_cpu_irq_init(MIPSCPU_INT_BASE); } diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S index da52297a2216..d16cf3822076 100644 --- a/arch/mips/mips-boards/sim/sim_irq.S +++ b/arch/mips/mips-boards/sim/sim_irq.S @@ -94,6 +94,8 @@ spurious: - j spurious_interrupt + jal spurious_interrupt + nop + j ret_from_irq nop END(simIRQ) diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c index e57f737bab10..f7ce76983328 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -18,9 +18,11 @@ #include <linux/init.h> #include <linux/mm.h> #include <linux/bootmem.h> +#include <linux/pfn.h> #include <asm/bootinfo.h> #include <asm/page.h> +#include <asm/sections.h> #include <asm/mips-boards/prom.h> @@ -39,9 +41,6 @@ static char *mtypes[3] = { }; #endif -/* References to section boundaries */ -extern char _end; - struct prom_pmemblock * __init prom_getmdesc(void) { unsigned int memsize; @@ -61,10 +60,10 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[2].type = simmem_reserved; mdesc[2].base = 0x00100000; - mdesc[2].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[2].base; + mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base; mdesc[3].type = simmem_free; - mdesc[3].base = CPHYSADDR(PAGE_ALIGN(&_end)); + mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end)); mdesc[3].size = memsize - mdesc[3].base; return &mdesc[0]; diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c index a9f0c2bfe4ad..b7084e7c4bf9 100644 --- a/arch/mips/mips-boards/sim/sim_smp.c +++ b/arch/mips/mips-boards/sim/sim_smp.c @@ -44,8 +44,6 @@ void core_send_ipi(int cpu, unsigned int action) { #ifdef CONFIG_MIPS_MT_SMTC - void smtc_send_ipi(int, int, unsigned int); - smtc_send_ipi(cpu, LINUX_SMP_IPI, action); #endif /* CONFIG_MIPS_MT_SMTC */ /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ @@ -59,15 +57,8 @@ void core_send_ipi(int cpu, unsigned int action) void __init prom_build_cpu_map(void) { #ifdef CONFIG_MIPS_MT_SMTC - extern int mipsmt_build_cpu_map(int startslot); int nextslot; - cpus_clear(phys_cpu_present_map); - - /* Register the boot CPU */ - - smp_prepare_boot_cpu(); - /* * As of November, 2004, MIPSsim only simulates one core * at a time. However, that core may be a MIPS MT core @@ -87,8 +78,6 @@ void __init prom_build_cpu_map(void) void prom_boot_secondary(int cpu, struct task_struct *idle) { #ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_boot_secondary(int cpu, struct task_struct *t); - smtc_boot_secondary(cpu, idle); #endif /* CONFIG_MIPS_MT_SMTC */ } @@ -113,7 +102,6 @@ void prom_init_secondary(void) void prom_prepare_cpus(unsigned int max_cpus) { #ifdef CONFIG_MIPS_MT_SMTC - void mipsmt_prepare_cpus(int c); /* * As noted above, we can assume a single CPU for now * but it may be multithreaded. @@ -132,8 +120,6 @@ void prom_prepare_cpus(unsigned int max_cpus) void prom_smp_finish(void) { #ifdef CONFIG_MIPS_MT_SMTC - void smtc_smp_finish(void); - smtc_smp_finish(); #endif /* CONFIG_MIPS_MT_SMTC */ } diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 9dd1352d5748..bb041a22f20a 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -260,6 +260,10 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, { } +static void local_r3k_flush_data_cache_page(unsigned long addr) +{ +} + static void r3k_flush_data_cache_page(unsigned long addr) { } @@ -335,6 +339,7 @@ void __init r3k_cache_init(void) flush_icache_range = r3k_flush_icache_range; flush_cache_sigtramp = r3k_flush_cache_sigtramp; + local_flush_data_cache_page = local_r3k_flush_data_cache_page; flush_data_cache_page = r3k_flush_data_cache_page; _dma_cache_wback_inv = r3k_dma_cache_wback_inv; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 32b7f6aeb983..4a43924cd4fc 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -29,6 +29,27 @@ #include <asm/war.h> #include <asm/cacheflush.h> /* for run_uncached() */ + +/* + * Special Variant of smp_call_function for use by cache functions: + * + * o No return value + * o collapses to normal function call on UP kernels + * o collapses to normal function call on systems with a single shared + * primary cache. + */ +static inline void r4k_on_each_cpu(void (*func) (void *info), void *info, + int retry, int wait) +{ + preempt_disable(); + +#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC) + smp_call_function(func, info, retry, wait); +#endif + func(info); + preempt_enable(); +} + /* * Must die. */ @@ -154,7 +175,8 @@ static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page) static inline void tx49_blast_icache32_page_indexed(unsigned long page) { - unsigned long start = page; + unsigned long indexmask = current_cpu_data.icache.waysize - 1; + unsigned long start = INDEX_BASE + (page & indexmask); unsigned long end = start + PAGE_SIZE; unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit; unsigned long ws_end = current_cpu_data.icache.ways << @@ -298,7 +320,7 @@ static void r4k_flush_cache_all(void) if (!cpu_has_dc_aliases) return; - on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1); } static inline void local_r4k___flush_cache_all(void * args) @@ -313,13 +335,14 @@ static inline void local_r4k___flush_cache_all(void * args) case CPU_R4400MC: case CPU_R10000: case CPU_R12000: + case CPU_R14000: r4k_blast_scache(); } } static void r4k___flush_cache_all(void) { - on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1); + r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1); } static inline void local_r4k_flush_cache_range(void * args) @@ -340,7 +363,7 @@ static inline void local_r4k_flush_cache_range(void * args) static void r4k_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1); } static inline void local_r4k_flush_cache_mm(void * args) @@ -369,7 +392,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm) if (!cpu_has_dc_aliases) return; - on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1); } struct flush_cache_page_args { @@ -460,7 +483,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, args.addr = addr; args.pfn = pfn; - on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); } static inline void local_r4k_flush_data_cache_page(void * addr) @@ -470,7 +493,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr) static void r4k_flush_data_cache_page(unsigned long addr) { - on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1); + r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1); } struct flush_icache_range_args { @@ -513,7 +536,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end) args.start = start; args.end = end; - on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1); instruction_hazard(); } @@ -589,7 +612,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma, args.vma = vma; args.page = page; - on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1); } @@ -688,7 +711,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg) static void r4k_flush_cache_sigtramp(unsigned long addr) { - on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1); } static void r4k_flush_icache_all(void) @@ -749,12 +772,12 @@ static void __init probe_pcache(void) icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 2; - c->icache.waybit = ffs(icache_size/2) - 1; + c->icache.waybit = __ffs(icache_size/2); dcache_size = 1 << (12 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); c->dcache.ways = 2; - c->dcache.waybit= ffs(dcache_size/2) - 1; + c->dcache.waybit= __ffs(dcache_size/2); c->options |= MIPS_CPU_CACHE_CDEX_P; break; @@ -811,6 +834,7 @@ static void __init probe_pcache(void) case CPU_R10000: case CPU_R12000: + case CPU_R14000: icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29)); c->icache.linesz = 64; c->icache.ways = 2; @@ -837,12 +861,12 @@ static void __init probe_pcache(void) icache_size = 1 << (10 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 2; - c->icache.waybit = ffs(icache_size/2) - 1; + c->icache.waybit = __ffs(icache_size/2); dcache_size = 1 << (10 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); c->dcache.ways = 2; - c->dcache.waybit = ffs(dcache_size/2) - 1; + c->dcache.waybit = __ffs(dcache_size/2); c->options |= MIPS_CPU_CACHE_CDEX_P; break; @@ -873,12 +897,12 @@ static void __init probe_pcache(void) icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 4; - c->icache.waybit = ffs(icache_size / c->icache.ways) - 1; + c->icache.waybit = __ffs(icache_size / c->icache.ways); dcache_size = 1 << (12 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); c->dcache.ways = 4; - c->dcache.waybit = ffs(dcache_size / c->dcache.ways) - 1; + c->dcache.waybit = __ffs(dcache_size / c->dcache.ways); #if !defined(CONFIG_SMP) || !defined(RM9000_CDEX_SMP_WAR) c->options |= MIPS_CPU_CACHE_CDEX_P; @@ -906,7 +930,7 @@ static void __init probe_pcache(void) icache_size = c->icache.sets * c->icache.ways * c->icache.linesz; - c->icache.waybit = ffs(icache_size/c->icache.ways) - 1; + c->icache.waybit = __ffs(icache_size/c->icache.ways); if (config & 0x8) /* VI bit */ c->icache.flags |= MIPS_CACHE_VTAG; @@ -926,7 +950,7 @@ static void __init probe_pcache(void) dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz; - c->dcache.waybit = ffs(dcache_size/c->dcache.ways) - 1; + c->dcache.waybit = __ffs(dcache_size/c->dcache.ways); c->options |= MIPS_CPU_PREFETCH; break; @@ -964,9 +988,11 @@ static void __init probe_pcache(void) c->dcache.flags |= MIPS_CACHE_PINDEX; case CPU_R10000: case CPU_R12000: + case CPU_R14000: case CPU_SB1: break; case CPU_24K: + case CPU_34K: if (!(read_c0_config7() & (1 << 16))) default: if (c->dcache.waysize > PAGE_SIZE) @@ -1090,6 +1116,7 @@ static void __init setup_scache(void) case CPU_R10000: case CPU_R12000: + case CPU_R14000: scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16); c->scache.linesz = 64 << ((config >> 13) & 1); c->scache.ways = 2; @@ -1134,6 +1161,31 @@ static void __init setup_scache(void) c->options |= MIPS_CPU_SUBSET_CACHES; } +void au1x00_fixup_config_od(void) +{ + /* + * c0_config.od (bit 19) was write only (and read as 0) + * on the early revisions of Alchemy SOCs. It disables the bus + * transaction overlapping and needs to be set to fix various errata. + */ + switch (read_c0_prid()) { + case 0x00030100: /* Au1000 DA */ + case 0x00030201: /* Au1000 HA */ + case 0x00030202: /* Au1000 HB */ + case 0x01030200: /* Au1500 AB */ + /* + * Au1100 errata actually keeps silence about this bit, so we set it + * just in case for those revisions that require it to be set according + * to arch/mips/au1000/common/cputable.c + */ + case 0x02030200: /* Au1100 AB */ + case 0x02030201: /* Au1100 BA */ + case 0x02030202: /* Au1100 BC */ + set_c0_config(1 << 19); + break; + } +} + static inline void coherency_setup(void) { change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT); @@ -1154,6 +1206,15 @@ static inline void coherency_setup(void) case CPU_R4400MC: clear_c0_config(CONF_CU); break; + /* + * We need to catch the ealry Alchemy SOCs with + * the write-only co_config.od bit and set it back to one... + */ + case CPU_AU1000: /* rev. DA, HA, HB */ + case CPU_AU1100: /* rev. AB, BA, BC ?? */ + case CPU_AU1500: /* rev. AB */ + au1x00_fixup_config_od(); + break; } } @@ -1198,6 +1259,7 @@ void __init r4k_cache_init(void) flush_cache_sigtramp = r4k_flush_cache_sigtramp; flush_icache_all = r4k_flush_icache_all; + local_flush_data_cache_page = local_r4k_flush_data_cache_page; flush_data_cache_page = r4k_flush_data_cache_page; flush_icache_range = r4k_flush_icache_range; diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 2f08b535f20e..f9b129491b1e 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -528,6 +528,7 @@ void sb1_cache_init(void) flush_cache_page = sb1_flush_cache_page; flush_cache_sigtramp = sb1_flush_cache_sigtramp; + local_flush_data_cache_page = (void *) sb1_nop; flush_data_cache_page = (void *) sb1_nop; /* Full flush */ diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index fe232e3988e3..5dfc9b1901f6 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -216,6 +216,11 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page tx39_blast_icache_page_indexed(page); } +static void local_tx39_flush_data_cache_page(void * addr) +{ + tx39_blast_dcache_page(addr); +} + static void tx39_flush_data_cache_page(unsigned long addr) { tx39_blast_dcache_page(addr); @@ -381,6 +386,7 @@ void __init tx39_cache_init(void) flush_icache_range = (void *) tx39h_flush_icache_all; flush_cache_sigtramp = (void *) tx39h_flush_icache_all; + local_flush_data_cache_page = (void *) tx39h_flush_icache_all; flush_data_cache_page = (void *) tx39h_flush_icache_all; _dma_cache_wback_inv = tx39h_dma_cache_wback_inv; @@ -406,6 +412,7 @@ void __init tx39_cache_init(void) flush_icache_range = tx39_flush_icache_range; flush_cache_sigtramp = tx39_flush_cache_sigtramp; + local_flush_data_cache_page = local_tx39_flush_data_cache_page; flush_data_cache_page = tx39_flush_data_cache_page; _dma_cache_wback_inv = tx39_dma_cache_wback_inv; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 591c22b080e4..83a56296be86 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -30,6 +30,7 @@ void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page); /* MIPS specific cache operations */ void (*flush_cache_sigtramp)(unsigned long addr); +void (*local_flush_data_cache_page)(void * addr); void (*flush_data_cache_page)(unsigned long addr); void (*flush_icache_all)(void); diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 2d9624fd10ec..e3a617224868 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -157,7 +157,6 @@ no_context: * Oops. The kernel tried to access some bad page. We'll have to * terminate things with extreme prejudice. */ - bust_spinlocks(1); printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at " @@ -188,11 +187,20 @@ do_sigbus: /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) goto no_context; - + else /* * Send a sigbus, regardless of whether we were in kernel * or user mode. */ +#if 0 + printk("do_page_fault() #3: sending SIGBUS to %s for " + "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n", + tsk->comm, + write ? "write access to" : "read access from", + field, address, + field, (unsigned long) regs->cp0_epc, + field, (unsigned long) regs->regs[31]); +#endif tsk->thread.cp0_badvaddr = address; info.si_signo = SIGBUS; info.si_errno = 0; @@ -201,7 +209,6 @@ do_sigbus: force_sig_info(SIGBUS, &info, tsk); return; - vmalloc_fault: { /* diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 1f7b37b38f5c..0c544375b856 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -83,6 +83,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type) preempt_check_resched(); } +#ifndef CONFIG_LIMITED_DMA /* * This is the same as kmap_atomic() but can map memory that doesn't * have a struct page associated with it. @@ -101,6 +102,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) return (void*) vaddr; } +#endif /* CONFIG_LIMITED_DMA */ struct page *__kmap_atomic_to_page(void *ptr) { diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ad89c442f299..33f6e1cdfd5b 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -227,7 +227,7 @@ void __init mem_init(void) for (tmp = 0; tmp < max_low_pfn; tmp++) if (page_is_ram(tmp)) { ram++; - if (PageReserved(mem_map+tmp)) + if (PageReserved(pfn_to_page(tmp))) reservedpages++; } @@ -276,6 +276,20 @@ void __init mem_init(void) } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ +void free_init_pages(char *what, unsigned long begin, unsigned long end) +{ + unsigned long addr; + + for (addr = begin; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + memset((void *)addr, 0xcc, PAGE_SIZE); + free_page(addr); + totalram_pages++; + } + printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); +} + #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { @@ -284,16 +298,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) start = (unsigned long)phys_to_virt(CPHYSADDR(start)); end = (unsigned long)phys_to_virt(CPHYSADDR(end)); #endif - if (start < end) - printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", - (end - start) >> 10); - - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - } + free_init_pages("initrd memory", start, end); } #endif @@ -301,24 +306,17 @@ extern unsigned long prom_free_prom_memory(void); void free_initmem(void) { - unsigned long addr, page, freed; + unsigned long start, end, freed; freed = prom_free_prom_memory(); + if (freed) + printk(KERN_INFO "Freeing firmware memory: %ldk freed\n",freed); - addr = (unsigned long) &__init_begin; - while (addr < (unsigned long) &__init_end) { + start = (unsigned long)(&__init_begin); + end = (unsigned long)(&__init_end); #ifdef CONFIG_64BIT - page = PAGE_OFFSET | CPHYSADDR(addr); -#else - page = addr; + start = PAGE_OFFSET | CPHYSADDR(start); + end = PAGE_OFFSET | CPHYSADDR(end); #endif - ClearPageReserved(virt_to_page(page)); - init_page_count(virt_to_page(page)); - free_page(page); - totalram_pages++; - freed += PAGE_SIZE; - addr += PAGE_SIZE; - } - printk(KERN_INFO "Freeing unused kernel memory: %ldk freed\n", - freed >> 10); + free_init_pages("unused kernel memory", start, end); } diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c index e4390dc3eb48..b7c749232ffe 100644 --- a/arch/mips/mm/pg-r4k.c +++ b/arch/mips/mm/pg-r4k.c @@ -357,6 +357,7 @@ void __init build_clear_page(void) case CPU_R10000: case CPU_R12000: + case CPU_R14000: pref_src_mode = Pref_LoadStreamed; pref_dst_mode = Pref_StoreStreamed; break; diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index 3b6cc9ba1b05..31ec73052423 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -138,7 +138,7 @@ void __init rm7k_sc_init(void) c->scache.linesz = sc_lsize; c->scache.ways = 4; - c->scache.waybit= ffs(scache_size / c->scache.ways) - 1; + c->scache.waybit= __ffs(scache_size / c->scache.ways); c->scache.waysize = scache_size / c->scache.ways; c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways); printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n", diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index a865f2394cb0..9dca099ba16b 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -32,13 +32,35 @@ extern void build_tlb_refill_handler(void); "nop; nop; nop; nop; nop; nop;\n\t" \ ".set reorder\n\t") +/* Atomicity and interruptability */ +#ifdef CONFIG_MIPS_MT_SMTC + +#include <asm/smtc.h> +#include <asm/mipsmtregs.h> + +#define ENTER_CRITICAL(flags) \ + { \ + unsigned int mvpflags; \ + local_irq_save(flags);\ + mvpflags = dvpe() +#define EXIT_CRITICAL(flags) \ + evpe(mvpflags); \ + local_irq_restore(flags); \ + } +#else + +#define ENTER_CRITICAL(flags) local_irq_save(flags) +#define EXIT_CRITICAL(flags) local_irq_restore(flags) + +#endif /* CONFIG_MIPS_MT_SMTC */ + void local_flush_tlb_all(void) { unsigned long flags; unsigned long old_ctx; int entry; - local_irq_save(flags); + ENTER_CRITICAL(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); write_c0_entrylo0(0); @@ -57,7 +79,7 @@ void local_flush_tlb_all(void) } tlbw_use_hazard(); write_c0_entryhi(old_ctx); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } /* All entries common to a mm share an asid. To effectively flush @@ -87,6 +109,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long flags; int size; + ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; local_irq_save(flags); @@ -120,7 +143,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } else { drop_mmu_context(mm, cpu); } - local_irq_restore(flags); + EXIT_CRITICAL(flags); } } @@ -129,9 +152,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) unsigned long flags; int size; + ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; - local_irq_save(flags); if (size <= current_cpu_data.tlbsize / 2) { int pid = read_c0_entryhi(); @@ -162,7 +185,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) } else { local_flush_tlb_all(); } - local_irq_restore(flags); + EXIT_CRITICAL(flags); } void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) @@ -175,7 +198,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) newpid = cpu_asid(cpu, vma->vm_mm); page &= (PAGE_MASK << 1); - local_irq_save(flags); + ENTER_CRITICAL(flags); oldpid = read_c0_entryhi(); write_c0_entryhi(page | newpid); mtc0_tlbw_hazard(); @@ -194,7 +217,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) finish: write_c0_entryhi(oldpid); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } } @@ -207,7 +230,7 @@ void local_flush_tlb_one(unsigned long page) unsigned long flags; int oldpid, idx; - local_irq_save(flags); + ENTER_CRITICAL(flags); oldpid = read_c0_entryhi(); page &= (PAGE_MASK << 1); write_c0_entryhi(page); @@ -226,7 +249,7 @@ void local_flush_tlb_one(unsigned long page) } write_c0_entryhi(oldpid); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } /* @@ -249,7 +272,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - local_irq_save(flags); + ENTER_CRITICAL(flags); pid = read_c0_entryhi() & ASID_MASK; address &= (PAGE_MASK << 1); @@ -277,7 +300,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) else tlb_write_indexed(); tlbw_use_hazard(); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } #if 0 @@ -291,7 +314,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma, pte_t *ptep; int idx; - local_irq_save(flags); + ENTER_CRITICAL(flags); address &= (PAGE_MASK << 1); asid = read_c0_entryhi() & ASID_MASK; write_c0_entryhi(address | asid); @@ -310,7 +333,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma, else tlb_write_indexed(); tlbw_use_hazard(); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } #endif @@ -322,7 +345,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long old_pagemask; unsigned long old_ctx; - local_irq_save(flags); + ENTER_CRITICAL(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); old_pagemask = read_c0_pagemask(); @@ -342,7 +365,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, BARRIER; write_c0_pagemask(old_pagemask); local_flush_tlb_all(); - local_irq_restore(flags); + EXIT_CRITICAL(flags); } /* @@ -362,7 +385,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long old_pagemask; unsigned long old_ctx; - local_irq_save(flags); + ENTER_CRITICAL(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); old_pagemask = read_c0_pagemask(); @@ -386,10 +409,11 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, write_c0_entryhi(old_ctx); write_c0_pagemask(old_pagemask); out: - local_irq_restore(flags); + EXIT_CRITICAL(flags); return ret; } +extern void __init sanitize_tlb_entries(void); static void __init probe_tlb(unsigned long config) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -402,6 +426,14 @@ static void __init probe_tlb(unsigned long config) */ if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) return; +#ifdef CONFIG_MIPS_MT_SMTC + /* + * If TLB is shared in SMTC system, total size already + * has been calculated and written into cpu_data tlbsize + */ + if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED) + return; +#endif /* CONFIG_MIPS_MT_SMTC */ reg = read_c0_config1(); if (!((config >> 7) & 3)) @@ -410,6 +442,15 @@ static void __init probe_tlb(unsigned long config) c->tlbsize = ((reg >> 25) & 0x3f) + 1; } +static int __initdata ntlb = 0; +static int __init set_ntlb(char *str) +{ + get_option(&str, &ntlb); + return 1; +} + +__setup("ntlb=", set_ntlb); + void __init tlb_init(void) { unsigned int config = read_c0_config(); @@ -432,5 +473,15 @@ void __init tlb_init(void) /* Did I tell you that ARC SUCKS? */ + if (ntlb) { + if (ntlb > 1 && ntlb <= current_cpu_data.tlbsize) { + int wired = current_cpu_data.tlbsize - ntlb; + write_c0_wired(wired); + write_c0_index(wired-1); + printk ("Restricting TLB to %d entries\n", ntlb); + } else + printk("Ignoring invalid argument ntlb=%d\n", ntlb); + } + build_tlb_refill_handler(); } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 599b3c297186..54507be2ab5b 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -7,6 +7,16 @@ * * Copyright (C) 2004,2005 by Thiemo Seufer * Copyright (C) 2005 Maciej W. Rozycki + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + * + * ... and the days got worse and worse and now you see + * I've gone completly out of my mind. + * + * They're coming to take me a away haha + * they're coming to take me a away hoho hihi haha + * to the funny farm where code is beautiful all the time ... + * + * (Condolences to Napoleon XIV) */ #include <stdarg.h> @@ -68,6 +78,7 @@ enum fields BIMM = 0x040, JIMM = 0x080, FUNC = 0x100, + SET = 0x200 }; #define OP_MASK 0x2f @@ -86,6 +97,8 @@ enum fields #define JIMM_SH 0 #define FUNC_MASK 0x2f #define FUNC_SH 0 +#define SET_MASK 0x7 +#define SET_SH 0 enum opcode { insn_invalid, @@ -129,8 +142,8 @@ static __initdata struct insn insn_table[] = { { insn_bne, M(bne_op,0,0,0,0,0), RS | RT | BIMM }, { insn_daddiu, M(daddiu_op,0,0,0,0,0), RS | RT | SIMM }, { insn_daddu, M(spec_op,0,0,0,0,daddu_op), RS | RT | RD }, - { insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD }, - { insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD }, + { insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD | SET}, + { insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD | SET}, { insn_dsll, M(spec_op,0,0,0,0,dsll_op), RT | RD | RE }, { insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE }, { insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE }, @@ -145,8 +158,8 @@ static __initdata struct insn insn_table[] = { { insn_lld, M(lld_op,0,0,0,0,0), RS | RT | SIMM }, { insn_lui, M(lui_op,0,0,0,0,0), RT | SIMM }, { insn_lw, M(lw_op,0,0,0,0,0), RS | RT | SIMM }, - { insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD }, - { insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD }, + { insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD | SET}, + { insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD | SET}, { insn_ori, M(ori_op,0,0,0,0,0), RS | RT | UIMM }, { insn_rfe, M(cop0_op,cop_op,0,0,0,rfe_op), 0 }, { insn_sc, M(sc_op,0,0,0,0,0), RS | RT | SIMM }, @@ -242,6 +255,14 @@ static __init u32 build_func(u32 arg) return arg & FUNC_MASK; } +static __init u32 build_set(u32 arg) +{ + if (arg & ~SET_MASK) + printk(KERN_WARNING "TLB synthesizer field overflow\n"); + + return arg & SET_MASK; +} + /* * The order of opcode arguments is implicitly left to right, * starting with RS and ending with FUNC or IMM. @@ -273,6 +294,7 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...) if (ip->fields & BIMM) op |= build_bimm(va_arg(ap, s32)); if (ip->fields & JIMM) op |= build_jimm(va_arg(ap, u32)); if (ip->fields & FUNC) op |= build_func(va_arg(ap, u32)); + if (ip->fields & SET) op |= build_set(va_arg(ap, u32)); va_end(ap); **buf = op; @@ -358,8 +380,8 @@ I_u1s2(_bgezl); I_u1s2(_bltz); I_u1s2(_bltzl); I_u1u2s3(_bne); -I_u1u2(_dmfc0); -I_u1u2(_dmtc0); +I_u1u2u3(_dmfc0); +I_u1u2u3(_dmtc0); I_u2u1s3(_daddiu); I_u3u1u2(_daddu); I_u2u1u3(_dsll); @@ -376,8 +398,8 @@ I_u2s3u1(_ll); I_u2s3u1(_lld); I_u1s2(_lui); I_u2s3u1(_lw); -I_u1u2(_mfc0); -I_u1u2(_mtc0); +I_u1u2u3(_mfc0); +I_u1u2u3(_mtc0); I_u2u1u3(_ori); I_0(_rfe); I_u2s3u1(_sc); @@ -451,8 +473,8 @@ L_LA(_r3000_write_probe_fail) # define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh) # define i_SRA(buf, rs, rt, sh) i_dsra(buf, rs, rt, sh) # define i_SRL(buf, rs, rt, sh) i_dsrl(buf, rs, rt, sh) -# define i_MFC0(buf, rt, rd) i_dmfc0(buf, rt, rd) -# define i_MTC0(buf, rt, rd) i_dmtc0(buf, rt, rd) +# define i_MFC0(buf, rt, rd...) i_dmfc0(buf, rt, rd) +# define i_MTC0(buf, rt, rd...) i_dmtc0(buf, rt, rd) # define i_ADDIU(buf, rs, rt, val) i_daddiu(buf, rs, rt, val) # define i_ADDU(buf, rs, rt, rd) i_daddu(buf, rs, rt, rd) # define i_SUBU(buf, rs, rt, rd) i_dsubu(buf, rs, rt, rd) @@ -464,8 +486,8 @@ L_LA(_r3000_write_probe_fail) # define i_SLL(buf, rs, rt, sh) i_sll(buf, rs, rt, sh) # define i_SRA(buf, rs, rt, sh) i_sra(buf, rs, rt, sh) # define i_SRL(buf, rs, rt, sh) i_srl(buf, rs, rt, sh) -# define i_MFC0(buf, rt, rd) i_mfc0(buf, rt, rd) -# define i_MTC0(buf, rt, rd) i_mtc0(buf, rt, rd) +# define i_MFC0(buf, rt, rd...) i_mfc0(buf, rt, rd) +# define i_MTC0(buf, rt, rd...) i_mtc0(buf, rt, rd) # define i_ADDIU(buf, rs, rt, val) i_addiu(buf, rs, rt, val) # define i_ADDU(buf, rs, rt, rd) i_addu(buf, rs, rt, rd) # define i_SUBU(buf, rs, rt, rd) i_subu(buf, rs, rt, rd) @@ -670,14 +692,15 @@ static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg, #define K1 27 /* Some CP0 registers */ -#define C0_INDEX 0 -#define C0_ENTRYLO0 2 -#define C0_ENTRYLO1 3 -#define C0_CONTEXT 4 -#define C0_BADVADDR 8 -#define C0_ENTRYHI 10 -#define C0_EPC 14 -#define C0_XCONTEXT 20 +#define C0_INDEX 0, 0 +#define C0_ENTRYLO0 2, 0 +#define C0_TCBIND 2, 2 +#define C0_ENTRYLO1 3, 0 +#define C0_CONTEXT 4, 0 +#define C0_BADVADDR 8, 0 +#define C0_ENTRYHI 10, 0 +#define C0_EPC 14, 0 +#define C0_XCONTEXT 20, 0 #ifdef CONFIG_64BIT # define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT) @@ -742,7 +765,7 @@ static void __init build_r3000_tlb_refill_handler(void) } #endif - memcpy((void *)CAC_BASE, tlb_handler, 0x80); + memcpy((void *)ebase, tlb_handler, 0x80); } /* @@ -852,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_R10000: case CPU_R12000: + case CPU_R14000: case CPU_4KC: case CPU_SB1: case CPU_SB1A: @@ -883,6 +907,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_4KEC: case CPU_24K: case CPU_34K: + case CPU_74K: i_ehb(p); tlbw(p); break; @@ -951,12 +976,20 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, /* No i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_SMP +# ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC uses TCBind value as "CPU" index + */ + i_mfc0(p, ptr, C0_TCBIND); + i_dsrl(p, ptr, ptr, 19); +# else /* * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. */ i_dmfc0(p, ptr, C0_CONTEXT); i_dsrl(p, ptr, ptr, 23); +#endif i_LA_mostly(p, tmp, pgdc); i_daddu(p, ptr, ptr, tmp); i_dmfc0(p, tmp, C0_BADVADDR); @@ -1014,9 +1047,21 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) /* 32 bit SMP has smp_processor_id() stored in CONTEXT. */ #ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC uses TCBind value as "CPU" index + */ + i_mfc0(p, ptr, C0_TCBIND); + i_LA_mostly(p, tmp, pgdc); + i_srl(p, ptr, ptr, 19); +#else + /* + * smp_processor_id() << 3 is stored in CONTEXT. + */ i_mfc0(p, ptr, C0_CONTEXT); i_LA_mostly(p, tmp, pgdc); i_srl(p, ptr, ptr, 23); +#endif i_addu(p, ptr, tmp, ptr); #else i_LA_mostly(p, ptr, pgdc); @@ -1247,7 +1292,7 @@ static void __init build_r4000_tlb_refill_handler(void) } #endif - memcpy((void *)CAC_BASE, final_handler, 0x100); + memcpy((void *)ebase, final_handler, 0x100); } /* diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile index 20bbd3ea44a8..67372f3f9654 100644 --- a/arch/mips/momentum/jaguar_atx/Makefile +++ b/arch/mips/momentum/jaguar_atx/Makefile @@ -6,7 +6,7 @@ # unless it's something special (ie not a .c file). # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c index 542eac82b63c..d7dea0a136aa 100644 --- a/arch/mips/momentum/jaguar_atx/dbg_io.c +++ b/arch/mips/momentum/jaguar_atx/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S deleted file mode 100644 index 55bc789733f2..000000000000 --- a/arch/mips/momentum/jaguar_atx/int-handler.S +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Based on work: - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for Jaguar-ATX board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * First level interrupt dispatcher for Ocelot-CS board - */ - .align 5 - NESTED(jaguar_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ - bnez t1, ll_sw0_irq - andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ - bnez t1, ll_sw1_irq - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pcixa_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_pcixb_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_pcia_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_pcib_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_uart_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - nop - nop - - /* now look at extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_mv64340_decode_irq - - nop - nop - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(jaguar_handle_int) - - .align 5 -ll_sw0_irq: - li a0, 0 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_sw1_irq: - li a0, 1 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_pcixa_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pcixb_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pcia_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pcib_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal ll_timer_interrupt - j ret_from_irq - -ll_mv64340_decode_irq: - move a0, sp - jal ll_mv64340_irq - j ret_from_irq diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c index 15588f91ace2..ec4032b38f19 100644 --- a/arch/mips/momentum/jaguar_atx/irq.c +++ b/arch/mips/momentum/jaguar_atx/irq.c @@ -10,7 +10,7 @@ * Copyright 2001 MontaVista Software Inc. * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -38,8 +38,37 @@ #include <linux/types.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> +#include <asm/time.h> -extern asmlinkage void jaguar_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP0) + do_IRQ(0, regs); + else if (pending & STATUSF_IP1) + do_IRQ(1, regs); + else if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) + ll_timer_interrupt(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + if (pending & STATUSF_IP8) + ll_mv64340_irq(regs); + } +} static struct irqaction cascade_mv64340 = { no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL @@ -53,8 +82,6 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, jaguar_handle_int); mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 91d9637143d7..1379c76845dc 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -381,24 +381,24 @@ void __init plat_setup(void) * shut down ethernet ports, just to be sure our memory doesn't get * corrupted by random ethernet traffic. */ - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8); - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff); - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1); /* Turn off the Bit-Error LED */ JAGUAR_FPGA_WRITE(0x80, CLR); diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile index aab8fd89f830..8bcea64dd27b 100644 --- a/arch/mips/momentum/ocelot_3/Makefile +++ b/arch/mips/momentum/ocelot_3/Makefile @@ -5,4 +5,4 @@ # removes any old dependencies. DON'T put your own dependencies here # unless it's something special (ie not a .c file). # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S deleted file mode 100644 index 4522f09ed769..000000000000 --- a/arch/mips/momentum/ocelot_3/int-handler.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2004 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * First-level interrupt dispatcher for Ocelot-3 board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * First level interrupt dispatcher for Ocelot-3 board - */ - .align 5 - NESTED(ocelot3_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP0 /* sw0 software interrupt (IRQ0) */ - bnez t1, ll_sw0_irq - - andi t1, t0, STATUSF_IP1 /* sw1 software interrupt (IRQ1) */ - bnez t1, ll_sw1_irq - - andi t1, t0, STATUSF_IP2 /* int0 hardware line (IRQ2) */ - bnez t1, ll_pci0slot1_irq - - andi t1, t0, STATUSF_IP3 /* int1 hardware line (IRQ3) */ - bnez t1, ll_pci0slot2_irq - - andi t1, t0, STATUSF_IP4 /* int2 hardware line (IRQ4) */ - bnez t1, ll_pci1slot1_irq - - andi t1, t0, STATUSF_IP5 /* int3 hardware line (IRQ5) */ - bnez t1, ll_pci1slot2_irq - - andi t1, t0, STATUSF_IP6 /* int4 hardware line (IRQ6) */ - bnez t1, ll_uart_irq - - andi t1, t0, STATUSF_IP7 /* cpu timer (IRQ7) */ - bnez t1, ll_cputimer_irq - - /* now look at extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line (IRQ9) */ - bnez t1, ll_mv64340_decode_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot3_handle_int) - - .align 5 -ll_sw0_irq: - li a0, 0 /* IRQ 1 */ - move a1, sp - jal do_IRQ - j ret_from_irq -ll_sw1_irq: - li a0, 1 /* IRQ 2 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci0slot1_irq: - li a0, 2 /* IRQ 3 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci0slot2_irq: - li a0, 3 /* IRQ 4 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci1slot1_irq: - li a0, 4 /* IRQ 5 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pci1slot2_irq: - li a0, 5 /* IRQ 6 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_irq: - li a0, 6 /* IRQ 7 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 /* IRQ 8 */ - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_mv64340_decode_irq: - move a0, sp - jal ll_mv64340_irq - j ret_from_irq - diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c index 42464dbd4ad2..87c63c340ae3 100644 --- a/arch/mips/momentum/ocelot_3/irq.c +++ b/arch/mips/momentum/ocelot_3/irq.c @@ -53,8 +53,6 @@ #include <asm/mipsregs.h> #include <asm/system.h> -extern asmlinkage void ocelot3_handle_int(void); - static struct irqaction cascade_mv64340 = { no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL }; @@ -67,9 +65,6 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM | ST0_BEV); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot3_handle_int); - mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); /* set up the cascading interrupts */ @@ -79,3 +74,36 @@ void __init arch_init_irq(void) set_c0_status(ST0_IM); /* IE in the status register */ } + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP0) + do_IRQ(0, regs); + else if (pending & STATUSF_IP1) + do_IRQ(1, regs); + else if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) + ll_mv64340_irq(regs); + else + spurious_interrupt(regs); + } +} diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index 370e75d0e75c..c69195234309 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -329,22 +329,22 @@ void __init plat_setup(void) /* shut down ethernet ports, just to be sure our memory doesn't get * corrupted by random ethernet traffic. */ - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); do {} - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); do {} - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); do {} - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); do {} - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); /* Turn off the Bit-Error LED */ OCELOT_FPGA_WRITE(0x80, CLR); diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile index 91240777f978..94802b4db472 100644 --- a/arch/mips/momentum/ocelot_c/Makefile +++ b/arch/mips/momentum/ocelot_c/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum Computer's Ocelot-C and -CS boards. # -obj-y += cpci-irq.o int-handler.o irq.o prom.o reset.o \ +obj-y += cpci-irq.o irq.o prom.o reset.o \ setup.o uart-irq.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c index 8720bccfdea2..f0a6a38fcf4d 100644 --- a/arch/mips/momentum/ocelot_c/dbg_io.c +++ b/arch/mips/momentum/ocelot_c/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S deleted file mode 100644 index 52349d9bf1be..000000000000 --- a/arch/mips/momentum/ocelot_c/int-handler.S +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for Ocelot-CS board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include "ocelot_c_fpga.h" - -/* - * First level interrupt dispatcher for Ocelot-CS board - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ - bnez t1, ll_sw0_irq - andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ - bnez t1, ll_sw1_irq - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_scsi_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_uart_decode_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_pmc_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_decode_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_mv64340_decode_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot_handle_int) - - .align 5 -ll_sw0_irq: - li a0, 0 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_sw1_irq: - li a0, 1 - move a1, sp - jal do_IRQ - j ret_from_irq -ll_scsi_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_decode_irq: - move a0, sp - jal ll_uart_irq - j ret_from_irq - -ll_pmc_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_decode_irq: - move a0, sp - jal ll_cpci_irq - j ret_from_irq - -ll_mv64340_decode_irq: - move a0, sp - jal ll_mv64340_irq - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c index a5764bc20e36..86f61ce59e53 100644 --- a/arch/mips/momentum/ocelot_c/irq.c +++ b/arch/mips/momentum/ocelot_c/irq.c @@ -48,7 +48,6 @@ #include <asm/mipsregs.h> #include <asm/system.h> -extern asmlinkage void ocelot_handle_int(void); extern void uart_irq_init(void); extern void cpci_irq_init(void); @@ -60,6 +59,33 @@ static struct irqaction cascade_mv64340 = { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL }; +extern void ll_uart_irq(struct pt_regs *regs); +extern void ll_cpci_irq(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP0) + do_IRQ(0, regs); + else if (pending & STATUSF_IP1) + do_IRQ(1, regs); + else if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + ll_uart_irq(regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + ll_cpci_irq(regs); + else if (pending & STATUSF_IP6) + ll_mv64340_irq(regs); + else if (pending & STATUSF_IP7) + do_IRQ(7, regs); + else + spurious_interrupt(regs); +} + void __init arch_init_irq(void) { /* @@ -68,8 +94,6 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); mips_cpu_irq_init(0); /* set up the cascading interrupts */ diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile index e5f1cb086973..adb5665d40a9 100644 --- a/arch/mips/momentum/ocelot_g/Makefile +++ b/arch/mips/momentum/ocelot_g/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum Computer's Ocelot-G board. # -obj-y += int-handler.o irq.o gt-irq.o prom.o reset.o setup.o +obj-y += irq.o gt-irq.o prom.o reset.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c index 8720bccfdea2..f0a6a38fcf4d 100644 --- a/arch/mips/momentum/ocelot_g/dbg_io.c +++ b/arch/mips/momentum/ocelot_g/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S deleted file mode 100644 index 772e8f713176..000000000000 --- a/arch/mips/momentum/ocelot_g/int-handler.S +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ocelot board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pri_enet_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_sec_enet_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_uart_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_galileo_p0_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - /* now look at the extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_galileo_p1_irq - andi t1, t0, STATUSF_IP9 /* int7 hardware line */ - bnez t1, ll_pmc_irq - andi t1, t0, STATUSF_IP10 /* int8 hardware line */ - bnez t1, ll_cpci_abcd_irq - andi t1, t0, STATUSF_IP11 /* int9 hardware line */ - bnez t1, ll_testpoint_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot_handle_int) - - .align 5 -ll_pri_enet_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_sec_enet_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_p0_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_p1_irq: - li a0, 8 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc_irq: - li a0, 9 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_abcd_irq: - li a0, 10 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_testpoint_irq: - li a0, 11 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c index 5eb85b164205..7a4a419804f1 100644 --- a/arch/mips/momentum/ocelot_g/irq.c +++ b/arch/mips/momentum/ocelot_g/irq.c @@ -48,7 +48,41 @@ #include <asm/mipsregs.h> #include <asm/system.h> -extern asmlinkage void ocelot_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) + do_IRQ(8, regs); + else if (pending & STATUSF_IP9) + do_IRQ(9, regs); + else if (pending & STATUSF_IP10) + do_IRQ(10, regs); + else if (pending & STATUSF_IP11) + do_IRQ(11, regs); + else + spurious_interrupt(regs); + } +} + extern void gt64240_irq_init(void); void __init arch_init_irq(void) @@ -60,8 +94,6 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 935dd851f480..c31e4cff64e0 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -14,8 +14,8 @@ #include "op_impl.h" -extern struct op_mips_model op_model_mipsxx __attribute__((weak)); -extern struct op_mips_model op_model_rm9000 __attribute__((weak)); +extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak)); +extern struct op_mips_model op_model_rm9000_ops __attribute__((weak)); static struct op_mips_model *model; @@ -27,7 +27,7 @@ static int op_mips_setup(void) model->reg_setup(ctr); /* Configure the registers on all cpus. */ - on_each_cpu(model->cpu_setup, 0, 0, 1); + on_each_cpu(model->cpu_setup, NULL, 0, 1); return 0; } @@ -80,13 +80,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_24K: case CPU_25KF: case CPU_34K: + case CPU_74K: case CPU_SB1: case CPU_SB1A: - lmodel = &op_model_mipsxx; + lmodel = &op_model_mipsxx_ops; break; case CPU_RM9000: - lmodel = &op_model_rm9000; + lmodel = &op_model_rm9000_ops; break; }; @@ -114,5 +115,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { - model->exit(); + if (model) + model->exit(); } diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 95d488ca0754..f26a00e13204 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -23,7 +23,7 @@ #define M_COUNTER_OVERFLOW (1UL << 31) -struct op_mips_model op_model_mipsxx; +struct op_mips_model op_model_mipsxx_ops; static struct mipsxx_register_config { unsigned int control[4]; @@ -34,7 +34,7 @@ static struct mipsxx_register_config { static void mipsxx_reg_setup(struct op_counter_config *ctr) { - unsigned int counters = op_model_mipsxx.num_counters; + unsigned int counters = op_model_mipsxx_ops.num_counters; int i; /* Compute the performance counter control word. */ @@ -62,7 +62,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr) static void mipsxx_cpu_setup (void *args) { - unsigned int counters = op_model_mipsxx.num_counters; + unsigned int counters = op_model_mipsxx_ops.num_counters; switch (counters) { case 4: @@ -83,7 +83,7 @@ static void mipsxx_cpu_setup (void *args) /* Start all counters on current CPU */ static void mipsxx_cpu_start(void *args) { - unsigned int counters = op_model_mipsxx.num_counters; + unsigned int counters = op_model_mipsxx_ops.num_counters; switch (counters) { case 4: @@ -100,7 +100,7 @@ static void mipsxx_cpu_start(void *args) /* Stop all counters on current CPU */ static void mipsxx_cpu_stop(void *args) { - unsigned int counters = op_model_mipsxx.num_counters; + unsigned int counters = op_model_mipsxx_ops.num_counters; switch (counters) { case 4: @@ -116,7 +116,7 @@ static void mipsxx_cpu_stop(void *args) static int mipsxx_perfcount_handler(struct pt_regs *regs) { - unsigned int counters = op_model_mipsxx.num_counters; + unsigned int counters = op_model_mipsxx_ops.num_counters; unsigned int control; unsigned int counter; int handled = 0; @@ -187,33 +187,37 @@ static int __init mipsxx_init(void) reset_counters(counters); - op_model_mipsxx.num_counters = counters; + op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_data.cputype) { case CPU_20KC: - op_model_mipsxx.cpu_type = "mips/20K"; + op_model_mipsxx_ops.cpu_type = "mips/20K"; break; case CPU_24K: - op_model_mipsxx.cpu_type = "mips/24K"; + op_model_mipsxx_ops.cpu_type = "mips/24K"; break; case CPU_25KF: - op_model_mipsxx.cpu_type = "mips/25K"; + op_model_mipsxx_ops.cpu_type = "mips/25K"; break; #ifndef CONFIG_SMP case CPU_34K: - op_model_mipsxx.cpu_type = "mips/34K"; + op_model_mipsxx_ops.cpu_type = "mips/34K"; + break; + + case CPU_74K: + op_model_mipsxx_ops.cpu_type = "mips/74K"; break; #endif case CPU_5KC: - op_model_mipsxx.cpu_type = "mips/5K"; + op_model_mipsxx_ops.cpu_type = "mips/5K"; break; case CPU_SB1: case CPU_SB1A: - op_model_mipsxx.cpu_type = "mips/sb1"; + op_model_mipsxx_ops.cpu_type = "mips/sb1"; break; default: @@ -229,12 +233,12 @@ static int __init mipsxx_init(void) static void mipsxx_exit(void) { - reset_counters(op_model_mipsxx.num_counters); + reset_counters(op_model_mipsxx_ops.num_counters); perf_irq = null_perf_irq; } -struct op_mips_model op_model_mipsxx = { +struct op_mips_model op_model_mipsxx_ops = { .reg_setup = mipsxx_reg_setup, .cpu_setup = mipsxx_cpu_setup, .init = mipsxx_init, diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c index 9b75e41c78ef..b7063fefa65b 100644 --- a/arch/mips/oprofile/op_model_rm9000.c +++ b/arch/mips/oprofile/op_model_rm9000.c @@ -126,7 +126,7 @@ static void rm9000_exit(void) free_irq(rm9000_perfcount_irq, NULL); } -struct op_mips_model op_model_rm9000 = { +struct op_mips_model op_model_rm9000_ops = { .reg_setup = rm9000_reg_setup, .cpu_setup = rm9000_cpu_setup, .init = rm9000_init, diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile index 6e38f3bc443c..b7c638166e9f 100644 --- a/arch/mips/philips/pnx8550/common/Makefile +++ b/arch/mips/philips/pnx8550/common/Makefile @@ -22,6 +22,6 @@ # under Linux. # -obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o +obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += gdb_hook.o diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c index c500e2d41f2c..39ee6314f627 100644 --- a/arch/mips/philips/pnx8550/common/int.c +++ b/arch/mips/philips/pnx8550/common/int.c @@ -38,8 +38,6 @@ #include <int.h> #include <uart.h> -extern asmlinkage void cp0_irqdispatch(void); - static DEFINE_SPINLOCK(irq_lock); /* default prio for interrupts */ @@ -55,7 +53,7 @@ static char gic_prio[PNX8550_INT_GIC_TOTINT] = { 1 // 70 }; -void hw0_irqdispatch(int irq, struct pt_regs *regs) +static void hw0_irqdispatch(int irq, struct pt_regs *regs) { /* find out which interrupt */ irq = PNX8550_GIC_VECTOR_0 >> 3; @@ -68,7 +66,7 @@ void hw0_irqdispatch(int irq, struct pt_regs *regs) } -void timer_irqdispatch(int irq, struct pt_regs *regs) +static void timer_irqdispatch(int irq, struct pt_regs *regs) { irq = (0x01c0 & read_c0_config7()) >> 6; @@ -88,6 +86,20 @@ void timer_irqdispatch(int irq, struct pt_regs *regs) } } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP2) + do_IRQ(2, regs); + else if (pending & STATUSF_IP7) { + if (read_c0_config7() & 0x01c0) + timer_irqdispatch(7, regs); + } + + spurious_interrupt(regs); +} + static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) { unsigned long status = read_c0_status(); @@ -223,9 +235,6 @@ void __init arch_init_irq(void) int i; int configPR; - /* init of cp0 interrupts */ - set_except_vector(0, cp0_irqdispatch); - for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { irq_desc[i].handler = &level_irq_type; pnx8550_ack(i); /* mask the irq just in case */ diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S deleted file mode 100644 index 338bffda3fab..000000000000 --- a/arch/mips/philips/pnx8550/common/mipsIRQ.S +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (c) 2002 Philips, Inc. All rights. - * Copyright (c) 2002 Red Hat, Inc. All rights. - * - * This software may be freely redistributed under the terms of the - * GNU General Public License. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Based upon arch/mips/galileo-boards/ev64240/int-handler.S - * - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* - * cp0_irqdispatch - * - * Code to handle in-core interrupt exception. - */ - - .align 5 - .set reorder - .set noat - NESTED(cp0_irqdispatch, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0,CP0_CAUSE - mfc0 t2,CP0_STATUS - - and t0,t2 - - andi t1,t0,STATUSF_IP2 /* int0 hardware line */ - bnez t1,ll_hw0_irq - nop - - andi t1,t0,STATUSF_IP7 /* int5 hardware line */ - bnez t1,ll_timer_irq - nop - - /* wrong alarm or masked ... */ - - j spurious_interrupt - nop - END(cp0_irqdispatch) - - .align 5 - .set reorder -ll_hw0_irq: - li a0,2 - move a1,sp - jal hw0_irqdispatch - nop - j ret_from_irq - nop - - .align 5 - .set reorder -ll_timer_irq: - mfc0 t3,CP0_CONFIG,7 - andi t4,t3,0x01c0 - beqz t4,ll_timer_out - nop - li a0,7 - move a1,sp - jal timer_irqdispatch - nop - -ll_timer_out: j ret_from_irq - nop diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c index a592260fd673..5436b4b97455 100644 --- a/arch/mips/philips/pnx8550/common/platform.c +++ b/arch/mips/philips/pnx8550/common/platform.c @@ -18,6 +18,7 @@ #include <linux/resource.h> #include <linux/serial.h> #include <linux/serial_ip3106.h> +#include <linux/platform_device.h> #include <int.h> #include <usb.h> diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index ae96a71a3089..e931e0d44229 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile @@ -2,7 +2,7 @@ # Makefile for the PMC-Sierra Titan # -obj-y += irq-handler.o irq.o i2c-yosemite.o prom.o py-console.o setup.o +obj-y += irq.o i2c-yosemite.o prom.o py-console.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/pmc-sierra/yosemite/irq-handler.S b/arch/mips/pmc-sierra/yosemite/irq-handler.S deleted file mode 100644 index 33b9c40d4f5c..000000000000 --- a/arch/mips/pmc-sierra/yosemite/irq-handler.S +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2003, 04 PMC-Sierra Inc. - * Author: Manish Lachwani (lachwani@pmc-sierra.com - * Copyright 2004 Ralf Baechle (ralf@linux-mips.org) - * - * First-level interrupt router for the PMC-Sierra Titan board - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Titan supports Hypertransport or PCI but not both. Hence, one interrupt - * line is shared between the PCI slot A and Hypertransport. This is the - * Processor INTB #0. - */ - -#include <linux/config.h> -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .align 5 - NESTED(titan_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - .set noreorder - la ra, ret_from_irq - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t2, t0, STATUSF_IP7 /* INTB5 hardware line */ - bnez t2, ll_timer_irq /* Timer */ - andi t1, t0, STATUSF_IP2 /* INTB0 hardware line */ - bnez t1, ll_pcia_irq /* 64-bit PCI */ - andi t2, t0, STATUSF_IP3 /* INTB1 hardware line */ - bnez t2, ll_pcib_irq /* second 64-bit PCI slot */ - andi t1, t0, STATUSF_IP4 /* INTB2 hardware line */ - bnez t1, ll_duart_irq /* UART */ - andi t2, t0, STATUSF_IP5 /* SMP inter-core interrupts */ - bnez t2, ll_smp_irq - andi t1, t0, STATUSF_IP6 - bnez t1, ll_ht_irq /* Hypertransport */ - - move a0, sp - j do_extended_irq - END(titan_handle_int) - - .set reorder - .align 5 - -ll_pcia_irq: - li a0, 2 - move a1, sp -#ifdef CONFIG_HYPERTRANSPORT - j ll_ht_smp_irq_handler -#else - j do_IRQ -#endif - -ll_pcib_irq: - li a0, 3 - move a1, sp - j do_IRQ - -ll_duart_irq: - li a0, 4 - move a1, sp - j do_IRQ - -ll_smp_irq: - li a0, 5 - move a1, sp -#ifdef CONFIG_SMP - j titan_mailbox_irq -#else - j do_IRQ -#endif - -ll_ht_irq: - li a0, 6 - move a1, sp - j ll_ht_smp_irq_handler - -ll_timer_irq: - li a0, 7 - move a1, sp - j do_IRQ diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index f4e2897d9bf7..a1f524fc4c10 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -2,6 +2,8 @@ * Copyright (C) 2003 PMC-Sierra Inc. * Author: Manish Lachwani (lachwani@pmc-sierra.com) * + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -55,7 +57,6 @@ #define HYPERTRANSPORT_INTC 0x7a /* INTC# */ #define HYPERTRANSPORT_INTD 0x7b /* INTD# */ -extern asmlinkage void titan_handle_int(void); extern void jaguar_mailbox_irq(struct pt_regs *); /* @@ -125,6 +126,35 @@ asmlinkage void do_extended_irq(struct pt_regs *regs) } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int cause = read_c0_cause(); + unsigned int status = read_c0_status(); + unsigned int pending = cause & status; + + if (pending & STATUSF_IP7) { + do_IRQ(7, regs); + } else if (pending & STATUSF_IP2) { +#ifdef CONFIG_HYPERTRANSPORT + ll_ht_smp_irq_handler(2, regs); +#else + do_IRQ(2, regs); +#endif + } else if (pending & STATUSF_IP3) { + do_IRQ(3, regs); + } else if (pending & STATUSF_IP4) { + do_IRQ(4, regs); + } else if (pending & STATUSF_IP5) { +#ifdef CONFIG_SMP + titan_mailbox_irq(regs); +#else + do_IRQ(5, regs); +#endif + } else if (pending & STATUSF_IP6) { + do_IRQ(4, regs); + } +} + #ifdef CONFIG_KGDB extern void init_second_port(void); #endif @@ -136,7 +166,6 @@ void __init arch_init_irq(void) { clear_c0_status(ST0_IM); - set_except_vector(0, titan_handle_int); mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); rm9k_cpu_irq_init(12); diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile index 6a8e8bcef552..730f459f3e99 100644 --- a/arch/mips/qemu/Makefile +++ b/arch/mips/qemu/Makefile @@ -2,6 +2,6 @@ # Makefile for Qemu specific kernel interface routines under Linux. # -obj-y = q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o +obj-y = q-firmware.o q-irq.o q-mem.o q-setup.o obj-$(CONFIG_SMP) += q-smp.o diff --git a/arch/mips/qemu/q-int.S b/arch/mips/qemu/q-int.S deleted file mode 100644 index 6e3dfe5eb14b..000000000000 --- a/arch/mips/qemu/q-int.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Qemu interrupt handler code. - * - * Copyright (C) 2005 by Ralf Baechle - */ -#include <asm/asm.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .align 5 - NESTED(qemu_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - move a0, sp - PTR_LA ra, ret_from_irq - j do_qemu_int - END(qemu_handle_int) diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c index 2c4e0704ff10..3352374c4c7d 100644 --- a/arch/mips/qemu/q-irq.c +++ b/arch/mips/qemu/q-irq.c @@ -9,7 +9,7 @@ extern asmlinkage void qemu_handle_int(void); -asmlinkage void do_qemu_int(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) { unsigned int pending = read_c0_status() & read_c0_cause(); @@ -29,7 +29,6 @@ asmlinkage void do_qemu_int(struct pt_regs *regs) void __init arch_init_irq(void) { - set_except_vector(0, qemu_handle_int); mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */ init_i8259_irqs(); diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile index eb0820fe50bd..6aa4c0cd169c 100644 --- a/arch/mips/sgi-ip22/Makefile +++ b/arch/mips/sgi-ip22/Makefile @@ -3,7 +3,7 @@ # under Linux. # -obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-irq.o ip22-berr.o \ +obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \ ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o obj-$(CONFIG_EISA) += ip22-eisa.o diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index d16fb43b1a93..fc6a7e2b189c 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -37,7 +37,6 @@ static char lc1msk_to_irqnr[256]; static char lc2msk_to_irqnr[256]; static char lc3msk_to_irqnr[256]; -extern asmlinkage void indyIRQ(void); extern int ip22_eisa_init(void); static void enable_local0_irq(unsigned int irq) @@ -224,7 +223,7 @@ static struct hw_interrupt_type ip22_local3_irq_type = { .end = end_local3_irq, }; -void indy_local0_irqdispatch(struct pt_regs *regs) +static void indy_local0_irqdispatch(struct pt_regs *regs) { u8 mask = sgint->istat0 & sgint->imask0; u8 mask2; @@ -242,7 +241,7 @@ void indy_local0_irqdispatch(struct pt_regs *regs) return; } -void indy_local1_irqdispatch(struct pt_regs *regs) +static void indy_local1_irqdispatch(struct pt_regs *regs) { u8 mask = sgint->istat1 & sgint->imask1; u8 mask2; @@ -262,7 +261,7 @@ void indy_local1_irqdispatch(struct pt_regs *regs) extern void ip22_be_interrupt(int irq, struct pt_regs *regs); -void indy_buserror_irq(struct pt_regs *regs) +static void indy_buserror_irq(struct pt_regs *regs) { int irq = SGI_BUSERR_IRQ; @@ -307,6 +306,56 @@ static struct irqaction map1_cascade = { #define SGI_INTERRUPTS SGINT_LOCAL3 #endif +extern void indy_r4k_timer_interrupt(struct pt_regs *regs); +extern void indy_8254timer_irq(struct pt_regs *regs); + +/* + * IRQs on the INDY look basically (barring software IRQs which we don't use + * at all) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Local IRQ level zero + * 3 Local IRQ level one + * 4 8254 Timer zero + * 5 8254 Timer one + * 6 Bus Error + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Local IRQ zero + * Local IRQ one + * Bus Error + * 8254 Timer zero + * Lowest ---- 8254 Timer one + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause(); + + /* + * First we check for r4k counter/timer IRQ. + */ + if (pending & CAUSEF_IP7) + indy_r4k_timer_interrupt(regs); + else if (pending & CAUSEF_IP2) + indy_local0_irqdispatch(regs); + else if (pending & CAUSEF_IP3) + indy_local1_irqdispatch(regs); + else if (pending & CAUSEF_IP6) + indy_buserror_irq(regs); + else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) + indy_8254timer_irq(regs); +} + extern void mips_cpu_irq_init(unsigned int irq_base); void __init arch_init_irq(void) @@ -369,8 +418,6 @@ void __init arch_init_irq(void) sgint->cmeimask0 = 0; sgint->cmeimask1 = 0; - set_except_vector(0, indyIRQ); - /* init CPU irqs */ mips_cpu_irq_init(SGINT_CPU); diff --git a/arch/mips/sgi-ip22/ip22-irq.S b/arch/mips/sgi-ip22/ip22-irq.S deleted file mode 100644 index 6ccbd9e1d967..000000000000 --- a/arch/mips/sgi-ip22/ip22-irq.S +++ /dev/null @@ -1,118 +0,0 @@ -/* - * ip22-irq.S: Interrupt exception dispatch code for FullHouse and - * Guiness. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - */ - -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the INDY look basically (barring software IRQs - * which we don't use at all) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Local IRQ level zero - * 3 Local IRQ level one - * 4 8254 Timer zero - * 5 8254 Timer one - * 6 Bus Error - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Local IRQ zero - * Local IRQ one - * Bus Error - * 8254 Timer zero - * Lowest ---- 8254 Timer one - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(indyIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 s0, CP0_CAUSE # get irq mask - - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero - - /* Wheee, a timer interrupt. */ - jal indy_r4k_timer_interrupt - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check local level one - - /* Wheee, local level zero interrupt. */ - jal indy_local0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP6 # delay slot, check bus error - - /* Wheee, local level one interrupt. */ - jal indy_local1_irqdispatch - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) # delay slot - - /* Wheee, an asynchronous bus error... */ - jal indy_buserror_irq - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - /* Here by mistake? It is possible, that by the time we take - * the exception the IRQ pin goes low, so just leave if this - * is the case. - */ - beq a0, zero, 1f - nop # delay slot - - /* Must be one of the 8254 timers... */ - jal indy_8254timer_irq - move a0, sp # delay slot -1: - j ret_from_irq - nop # delay slot - END(indyIRQ) diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index 4ba340780c35..686ba14e2882 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -2,7 +2,7 @@ # Makefile for the IP27 specific kernel interface routines under Linux. # -obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o ip27-irq-glue.o \ +obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o \ ip27-klconfig.o ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o \ ip27-timer.o ip27-hubio.o ip27-xtalk.o diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO index 32106131b0d0..19f1512c8f2e 100644 --- a/arch/mips/sgi-ip27/TODO +++ b/arch/mips/sgi-ip27/TODO @@ -9,10 +9,6 @@ ip27-init.c:find_lbaord_real. DONE in irix? 6. Investigate why things do not work without the setup_test() call being invoked on all nodes in ip27-memory.c. -7. Too many CLIs in the locore handlers : -For the low level handlers set up by set_except_vector(), -__tlb_refill_debug_tramp, __xtlb_refill_debug_tramp and cacheerror, -investigate whether the code should do CLI, STI or KMODE. 8. Too many do_page_faults invoked - investigate. 9. start_thread must turn off UX64 ... and define tlb_refill_debug. 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable diff --git a/arch/mips/sgi-ip27/ip27-irq-glue.S b/arch/mips/sgi-ip27/ip27-irq-glue.S deleted file mode 100644 index c304df715e0a..000000000000 --- a/arch/mips/sgi-ip27/ip27-irq-glue.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - - .text - .align 5 -NESTED(ip27_irq, PT_SIZE, sp) - SAVE_ALL - CLI - - mfc0 s0, CP0_CAUSE - mfc0 t0, CP0_STATUS - and s0, t0 - move a0, sp - PTR_LA ra, ret_from_irq - - /* First check for RT interrupt. */ - andi t0, s0, CAUSEF_IP4 - bnez t0, ip4 - andi t0, s0, CAUSEF_IP2 - bnez t0, ip2 - andi t0, s0, CAUSEF_IP3 - bnez t0, ip3 - andi t0, s0, CAUSEF_IP5 - bnez t0, ip5 - andi t0, s0, CAUSEF_IP6 - bnez t0, ip6 - j ra - -ip2: j ip27_do_irq_mask0 # PI_INT_PEND_0 or CC_PEND_{A|B} -ip3: j ip27_do_irq_mask1 # PI_INT_PEND_1 -ip4: j ip27_rt_timer_interrupt -ip5: j ip27_prof_timer -ip6: j ip27_hub_error - - END(ip27_irq) diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 2854ac4c9be1..2e643d2f51cb 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -130,7 +130,7 @@ static int ms1bit(unsigned long x) * Kanoj 05.13.00 */ -void ip27_do_irq_mask0(struct pt_regs *regs) +static void ip27_do_irq_mask0(struct pt_regs *regs) { int irq, swlevel; hubreg_t pend0, mask0; @@ -171,7 +171,7 @@ void ip27_do_irq_mask0(struct pt_regs *regs) LOCAL_HUB_L(PI_INT_PEND0); } -void ip27_do_irq_mask1(struct pt_regs *regs) +static void ip27_do_irq_mask1(struct pt_regs *regs) { int irq, swlevel; hubreg_t pend1, mask1; @@ -196,12 +196,12 @@ void ip27_do_irq_mask1(struct pt_regs *regs) LOCAL_HUB_L(PI_INT_PEND1); } -void ip27_prof_timer(struct pt_regs *regs) +static void ip27_prof_timer(struct pt_regs *regs) { panic("CPU %d got a profiling interrupt", smp_processor_id()); } -void ip27_hub_error(struct pt_regs *regs) +static void ip27_hub_error(struct pt_regs *regs) { panic("CPU %d got a hub error interrupt", smp_processor_id()); } @@ -421,9 +421,26 @@ int __devinit request_bridge_irq(struct bridge_controller *bc) return irq; } +extern void ip27_rt_timer_interrupt(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned long pending = read_c0_cause() & read_c0_status(); + + if (pending & CAUSEF_IP4) + ip27_rt_timer_interrupt(regs); + else if (pending & CAUSEF_IP2) /* PI_INT_PEND_0 or CC_PEND_{A|B} */ + ip27_do_irq_mask0(regs); + else if (pending & CAUSEF_IP3) /* PI_INT_PEND_1 */ + ip27_do_irq_mask1(regs); + else if (pending & CAUSEF_IP5) + ip27_prof_timer(regs); + else if (pending & CAUSEF_IP6) + ip27_hub_error(regs); +} + void __init arch_init_irq(void) { - set_except_vector(0, ip27_irq); } void install_ipi(void) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index cddf1cedf007..36b662e27b6e 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -122,7 +122,7 @@ again: xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_set_time(xtime.tv_sec) == 0) { + if (rtc_mips_set_time(xtime.tv_sec) == 0) { last_rtc_update = xtime.tv_sec; } else { last_rtc_update = xtime.tv_sec - 600; diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile index 470898f4afe1..530bf848c3d0 100644 --- a/arch/mips/sgi-ip32/Makefile +++ b/arch/mips/sgi-ip32/Makefile @@ -3,7 +3,7 @@ # under Linux. # -obj-y += ip32-berr.o ip32-irq.o ip32-irq-glue.o ip32-setup.o ip32-reset.o \ +obj-y += ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \ crime.o ip32-memory.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sgi-ip32/ip32-irq-glue.S b/arch/mips/sgi-ip32/ip32-irq-glue.S deleted file mode 100644 index 200924e1c4f5..000000000000 --- a/arch/mips/sgi-ip32/ip32-irq-glue.S +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Low level interrupt handler for the SGI O2 aka IP32 aka Moosehead - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Harald Koerfgen - * Copyright (C) 2001 Keith M Wesolowski - */ -#include <asm/asm.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/stackframe.h> -#include <asm/addrspace.h> - - .text - .set noreorder - .set noat - .align 5 - NESTED(ip32_handle_int, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI # TEST: interrupts should be off - .set at - .set noreorder - - mfc0 s0,CP0_CAUSE - - andi t1, s0, IE_IRQ0 - bnez t1, handle_irq0 - andi t1, s0, IE_IRQ1 - bnez t1, handle_irq1 - andi t1, s0, IE_IRQ2 - bnez t1, handle_irq2 - andi t1, s0, IE_IRQ3 - bnez t1, handle_irq3 - andi t1, s0, IE_IRQ4 - bnez t1, handle_irq4 - andi t1, s0, IE_IRQ5 - bnez t1, handle_irq5 - nop - - /* Either someone has triggered the "software interrupts" - * or we lost an interrupt somehow. Ignore it. - */ - j ret_from_irq - nop - -handle_irq0: - jal ip32_irq0 - move a0, sp - j ret_from_irq - nop - -handle_irq1: - jal ip32_irq1 - move a0, sp - j ret_from_irq - nop - -handle_irq2: - jal ip32_irq2 - move a0, sp - j ret_from_irq - nop - -handle_irq3: - jal ip32_irq3 - move a0, sp - j ret_from_irq - nop - -handle_irq4: - jal ip32_irq4 - move a0, sp - j ret_from_irq - nop - -handle_irq5: - jal ip32_irq5 - move a0, sp - j ret_from_irq - nop - - END(ip32_handle_int) diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 2eb22d692ed9..8ba08047d164 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -31,12 +31,12 @@ /* issue a PIO read to make sure no PIO writes are pending */ static void inline flush_crime_bus(void) { - volatile unsigned long junk = crime->control; + crime->control; } static void inline flush_mace_bus(void) { - volatile unsigned long junk = mace->perif.ctrl.misc; + mace->perif.ctrl.misc; } #undef DEBUG_IRQ @@ -130,8 +130,6 @@ struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT, struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT, CPU_MASK_NONE, "CRIME CPU error", NULL, NULL }; -extern void ip32_handle_int(void); - /* * For interrupts wired from a single device to the CPU. Only the clock * uses this it seems, which is IRQ 0 and IP7. @@ -503,48 +501,67 @@ static void ip32_unknown_interrupt(struct pt_regs *regs) /* CRIME 1.1 appears to deliver all interrupts to this one pin. */ /* change this to loop over all edge-triggered irqs, exception masked out ones */ -void ip32_irq0(struct pt_regs *regs) +static void ip32_irq0(struct pt_regs *regs) { uint64_t crime_int; int irq = 0; crime_int = crime->istat & crime_mask; - irq = ffs(crime_int); - crime_int = 1 << (irq - 1); + irq = __ffs(crime_int); + crime_int = 1 << irq; if (crime_int & CRIME_MACEISA_INT_MASK) { unsigned long mace_int = mace->perif.ctrl.istat; - irq = ffs(mace_int & maceisa_mask) + 32; + irq = __ffs(mace_int & maceisa_mask) + 32; } + irq++; DBG("*irq %u*\n", irq); do_IRQ(irq, regs); } -void ip32_irq1(struct pt_regs *regs) +static void ip32_irq1(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq2(struct pt_regs *regs) +static void ip32_irq2(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq3(struct pt_regs *regs) +static void ip32_irq3(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq4(struct pt_regs *regs) +static void ip32_irq4(struct pt_regs *regs) { ip32_unknown_interrupt(regs); } -void ip32_irq5(struct pt_regs *regs) +static void ip32_irq5(struct pt_regs *regs) { ll_timer_interrupt(IP32_R4K_TIMER_IRQ, regs); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause(); + + if (likely(pending & IE_IRQ0)) + ip32_irq0(regs); + else if (unlikely(pending & IE_IRQ1)) + ip32_irq1(regs); + else if (unlikely(pending & IE_IRQ2)) + ip32_irq2(regs); + else if (unlikely(pending & IE_IRQ3)) + ip32_irq3(regs); + else if (unlikely(pending & IE_IRQ4)) + ip32_irq4(regs); + else if (likely(pending & IE_IRQ5)) + ip32_irq5(regs); +} + void __init arch_init_irq(void) { unsigned int irq; @@ -556,7 +573,6 @@ void __init arch_init_irq(void) crime->soft_int = 0; mace->perif.ctrl.istat = 0; mace->perif.ctrl.imask = 0; - set_except_vector(0, ip32_handle_int); for (irq = 0; irq <= IP32_IRQ_MAX; irq++) { hw_irq_controller *controller; diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile index 538d5a51ae94..7b36ff3873b7 100644 --- a/arch/mips/sibyte/bcm1480/Makefile +++ b/arch/mips/sibyte/bcm1480/Makefile @@ -1,4 +1,4 @@ -obj-y := setup.o irq.o irq_handler.o time.o +obj-y := setup.o irq.o time.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 9cf7d713b13c..e61760b14d99 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -187,9 +187,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask) #endif -/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */ -extern void bcm1480_irq_handler(void); - /*****************************************************************************/ static unsigned int startup_bcm1480_irq(unsigned int irq) @@ -422,7 +419,6 @@ void __init arch_init_irq(void) #endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - set_except_vector(0, bcm1480_irq_handler); #ifdef CONFIG_KGDB if (kgdb_flag) { @@ -473,3 +469,76 @@ void bcm1480_kgdb_interrupt(struct pt_regs *regs) } #endif /* CONFIG_KGDB */ + +static inline int dclz(unsigned long long x) +{ + int lz; + + __asm__ ( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return lz; +} + +extern void bcm1480_timer_interrupt(struct pt_regs *regs); +extern void bcm1480_mailbox_interrupt(struct pt_regs *regs); +extern void bcm1480_kgdb_interrupt(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending; + +#ifdef CONFIG_SIBYTE_BCM1480_PROF + /* Set compare to count to silence count/compare timer interrupts */ + write_c0_compare(read_c0_count()); +#endif + + pending = read_c0_cause(); + +#ifdef CONFIG_SIBYTE_BCM1480_PROF + if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ + sbprof_cpu_intr(exception_epc(regs)); +#endif + + if (pending & CAUSEF_IP4) + bcm1480_timer_interrupt(regs); + +#ifdef CONFIG_SMP + if (pending & CAUSEF_IP3) + bcm1480_mailbox_interrupt(regs); +#endif + +#ifdef CONFIG_KGDB + if (pending & CAUSEF_IP6) + bcm1480_kgdb_interrupt(regs); /* KGDB (uart 1) */ +#endif + + if (pending & CAUSEF_IP2) { + unsigned long long mask_h, mask_l; + unsigned long base; + + /* + * Default...we've hit an IP[2] interrupt, which means we've + * got to check the 1480 interrupt registers to figure out what + * to do. Need to detect which CPU we're on, now that + * smp_affinity is supported. + */ + base = A_BCM1480_IMR_MAPPER(smp_processor_id()); + mask_h = __raw_readq( + IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H)); + mask_l = __raw_readq( + IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L)); + + if (!mask_h) { + if (mask_h ^ 1) + do_IRQ(63 - dclz(mask_h), regs); + else + do_IRQ(127 - dclz(mask_l), regs); + } + } +} diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S deleted file mode 100644 index 408db88d050f..000000000000 --- a/arch/mips/sibyte/bcm1480/irq_handler.S +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * bcm1480_irq_handler() is the routine that is actually called when an - * interrupt occurs. It is installed as the exception vector handler in - * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c - * - * In the handle we figure out which interrupts need handling, and use that - * to call the dispatcher, which will take care of actually calling - * registered handlers - * - * Note that we take care of all raised interrupts in one go at the handler. - * This is more BSDish than the Indy code, and also, IMHO, more sane. - */ -#include <linux/config.h> - -#include <asm/addrspace.h> -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/sibyte/sb1250_defs.h> -#include <asm/sibyte/bcm1480_regs.h> -#include <asm/sibyte/bcm1480_int.h> - -/* - * What a pain. We have to be really careful saving the upper 32 bits of any - * register across function calls if we don't want them trashed--since were - * running in -o32, the calling routing never saves the full 64 bits of a - * register across a function call. Being the interrupt handler, we're - * guaranteed that interrupts are disabled during this code so we don't have - * to worry about random interrupts blasting the high 32 bits. - */ - - .text - .set push - .set noreorder - .set noat - .set mips64 - #.set mips4 - .align 5 - NESTED(bcm1480_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - -#ifdef CONFIG_SIBYTE_BCM1480_PROF - /* Set compare to count to silence count/compare timer interrupts */ - mfc0 t1, CP0_COUNT - mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */ -#endif - /* Read cause */ - mfc0 s0, CP0_CAUSE - -#ifdef CONFIG_SIBYTE_BCM1480_PROF - /* Cpu performance counter interrupt is routed to IP[7] */ - andi t1, s0, CAUSEF_IP7 - beqz t1, 0f - srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */ - and t1, t1, 0x4 /* mask to get just BD bit */ -#ifdef CONFIG_MIPS64 - dmfc0 a0, CP0_EPC - daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ -#else - mfc0 a0, CP0_EPC - addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ -#endif - jal sbprof_cpu_intr - nop - j ret_from_irq - nop -0: -#endif - - /* Timer interrupt is routed to IP[4] */ - andi t1, s0, CAUSEF_IP4 - beqz t1, 1f - nop - jal bcm1480_timer_interrupt - move a0, sp /* Pass the registers along */ - j ret_from_irq - nop /* delay slot */ -1: - -#ifdef CONFIG_SMP - /* Mailbox interrupt is routed to IP[3] */ - andi t1, s0, CAUSEF_IP3 - beqz t1, 2f - nop - jal bcm1480_mailbox_interrupt - move a0, sp - j ret_from_irq - nop /* delay slot */ -2: -#endif - -#ifdef CONFIG_KGDB - /* KGDB (uart 1) interrupt is routed to IP[6] */ - andi t1, s0, CAUSEF_IP6 - beqz t1, 3f - nop /* delay slot */ - jal bcm1480_kgdb_interrupt - move a0, sp - j ret_from_irq - nop /* delay slot */ -3: -#endif - - and t1, s0, CAUSEF_IP2 - beqz t1, 9f - nop - - /* - * Default...we've hit an IP[2] interrupt, which means we've got - * to check the 1480 interrupt registers to figure out what to do - * Need to detect which CPU we're on, now that smp_affinity is - * supported. - */ - PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE -#ifdef CONFIG_SMP - lw t1, TI_CPU($28) - sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT - addu v0, v0, t1 -#endif - - /* Read IP[2] status (get both high and low halves of status) */ - ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0) - ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0) - - move s2, zero /* intr number */ - li s3, 64 - - beqz s0, 9f /* No interrupts. Return. */ - move a1, sp - - xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */ - movz s2, s3, s4 /* start the intr number at 64, and */ - movz s0, s1, s4 /* look at the low status value. */ - - dclz s1, s0 /* Find the next interrupt. */ - dsubu a0, zero, s1 - daddiu a0, a0, 63 - jal do_IRQ - daddu a0, a0, s2 - -9: j ret_from_irq - nop - - .set pop - END(bcm1480_irq_handler) diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile index a8af84697588..a2fdbd62f8ac 100644 --- a/arch/mips/sibyte/sb1250/Makefile +++ b/arch/mips/sibyte/sb1250/Makefile @@ -1,4 +1,4 @@ -obj-y := setup.o irq.o irq_handler.o time.o +obj-y := setup.o irq.o time.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 589537bfcc3d..0f6e54db4888 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -163,10 +163,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask) } #endif - -/* Defined in arch/mips/sibyte/sb1250/irq_handler.S */ -extern void sb1250_irq_handler(void); - /*****************************************************************************/ static unsigned int startup_sb1250_irq(unsigned int irq) @@ -379,7 +375,6 @@ void __init arch_init_irq(void) #endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - set_except_vector(0, sb1250_irq_handler); #ifdef CONFIG_KGDB if (kgdb_flag) { @@ -409,7 +404,7 @@ void __init arch_init_irq(void) #define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg))) #define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg))) -void sb1250_kgdb_interrupt(struct pt_regs *regs) +static void sb1250_kgdb_interrupt(struct pt_regs *regs) { /* * Clear break-change status (allow some time for the remote @@ -424,3 +419,74 @@ void sb1250_kgdb_interrupt(struct pt_regs *regs) } #endif /* CONFIG_KGDB */ + +static inline int dclz(unsigned long long x) +{ + int lz; + + __asm__ ( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return lz; +} + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending; + +#ifdef CONFIG_SIBYTE_SB1250_PROF + /* Set compare to count to silence count/compare timer interrupts */ + write_c0_count(read_c0_count()); +#endif + + /* + * What a pain. We have to be really careful saving the upper 32 bits + * of any * register across function calls if we don't want them + * trashed--since were running in -o32, the calling routing never saves + * the full 64 bits of a register across a function call. Being the + * interrupt handler, we're guaranteed that interrupts are disabled + * during this code so we don't have to worry about random interrupts + * blasting the high 32 bits. + */ + + pending = read_c0_cause(); + +#ifdef CONFIG_SIBYTE_SB1250_PROF + if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */ + sbprof_cpu_intr(exception_epc(regs)); + } +#endif + + if (pending & CAUSEF_IP4) + sb1250_timer_interrupt(regs); + +#ifdef CONFIG_SMP + if (pending & CAUSEF_IP3) + sb1250_mailbox_interrupt(regs); +#endif + +#ifdef CONFIG_KGDB + if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ + sb1250_kgdb_interrupt(regs); +#endif + + if (pending & CAUSEF_IP2) { + unsigned long long mask; + + /* + * Default...we've hit an IP[2] interrupt, which means we've + * got to check the 1250 interrupt registers to figure out what + * to do. Need to detect which CPU we're on, now that + ~ smp_affinity is supported. + */ + mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(), + R_IMR_INTERRUPT_STATUS_BASE))); + if (mask) + do_IRQ(63 - dclz(mask), regs); + } +} diff --git a/arch/mips/sibyte/sb1250/irq_handler.S b/arch/mips/sibyte/sb1250/irq_handler.S deleted file mode 100644 index 60edc8fb302b..000000000000 --- a/arch/mips/sibyte/sb1250/irq_handler.S +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * sb1250_handle_int() is the routine that is actually called when an interrupt - * occurs. It is installed as the exception vector handler in arch_init_irq() - * in arch/mips/sibyte/sb1250/irq.c - * - * In the handle we figure out which interrupts need handling, and use that to - * call the dispatcher, which will take care of actually calling registered - * handlers - * - * Note that we take care of all raised interrupts in one go at the handler. - * This is more BSDish than the Indy code, and also, IMHO, more sane. - */ -#include <linux/config.h> - -#include <asm/addrspace.h> -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/sibyte/sb1250_defs.h> -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/sb1250_int.h> - -/* - * What a pain. We have to be really careful saving the upper 32 bits of any - * register across function calls if we don't want them trashed--since were - * running in -o32, the calling routing never saves the full 64 bits of a - * register across a function call. Being the interrupt handler, we're - * guaranteed that interrupts are disabled during this code so we don't have - * to worry about random interrupts blasting the high 32 bits. - */ - - .text - .set push - .set noreorder - .set noat - .set mips64 - .align 5 - NESTED(sb1250_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - -#ifdef CONFIG_SIBYTE_SB1250_PROF - /* Set compare to count to silence count/compare timer interrupts */ - mfc0 t1, CP0_COUNT - mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */ -#endif - /* Read cause */ - mfc0 s0, CP0_CAUSE - -#ifdef CONFIG_SIBYTE_SB1250_PROF - /* Cpu performance counter interrupt is routed to IP[7] */ - andi t1, s0, CAUSEF_IP7 - beqz t1, 0f - srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */ - and t1, t1, 0x4 /* mask to get just BD bit */ - mfc0 a0, CP0_EPC - jal sbprof_cpu_intr - addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ - j ret_from_irq - nop -0: -#endif - - /* Timer interrupt is routed to IP[4] */ - andi t1, s0, CAUSEF_IP4 - beqz t1, 1f - nop - jal sb1250_timer_interrupt - move a0, sp /* Pass the registers along */ - j ret_from_irq - nop # delay slot -1: - -#ifdef CONFIG_SMP - /* Mailbox interrupt is routed to IP[3] */ - andi t1, s0, CAUSEF_IP3 - beqz t1, 2f - nop - jal sb1250_mailbox_interrupt - move a0, sp - j ret_from_irq - nop # delay slot -2: -#endif - -#ifdef CONFIG_KGDB - /* KGDB (uart 1) interrupt is routed to IP[6] */ - andi t1, s0, CAUSEF_IP6 - beqz t1, 1f - nop # delay slot - jal sb1250_kgdb_interrupt - move a0, sp - j ret_from_irq - nop # delay slot -1: -#endif - - and t1, s0, CAUSEF_IP2 - beqz t1, 4f - nop - - /* - * Default...we've hit an IP[2] interrupt, which means we've got to - * check the 1250 interrupt registers to figure out what to do - * Need to detect which CPU we're on, now that smp_affinity is supported. - */ - PTR_LA v0, CKSEG1 + A_IMR_CPU0_BASE -#ifdef CONFIG_SMP - lw t1, TI_CPU($28) - sll t1, IMR_REGISTER_SPACING_SHIFT - addu v0, t1 -#endif - ld s0, R_IMR_INTERRUPT_STATUS_BASE(v0) /* read IP[2] status */ - - beqz s0, 4f /* No interrupts. Return */ - move a1, sp - -3: dclz s1, s0 /* Find the next interrupt */ - dsubu a0, zero, s1 - daddiu a0, a0, 63 - jal do_IRQ - nop - -4: j ret_from_irq - nop - - .set pop - END(sb1250_irq_handler) diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index 1e5676e4be86..9c7eaa5fb210 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile @@ -2,6 +2,6 @@ # Makefile for the SNI specific part of the kernel # -obj-y += int-handler.o irq.o pcimt_scache.o reset.o setup.o +obj-y += irq.o pcimt_scache.o reset.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S deleted file mode 100644 index 2cdc09f55f18..000000000000 --- a/arch/mips/sni/int-handler.S +++ /dev/null @@ -1,106 +0,0 @@ -/* - * SNI RM200 PCI specific interrupt handler code. - * - * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/sni.h> -#include <asm/stackframe.h> - -/* - * The PCI ASIC has the nasty property that it may delay writes if it is busy. - * As a consequence from writes that have not graduated when we exit from the - * interrupt handler we might catch a spurious interrupt. To avoid this we - * force the PCI ASIC to graduate all writes by executing a read from the - * PCI bus. - */ - .set noreorder - .set noat - .align 5 - NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - /* Blinken light ... */ - lb t0, led_cache - addiu t0, 1 - sb t0, led_cache - sb t0, PCIMT_CSLED # write only register - .data -led_cache: .byte 0 - .text - - mfc0 t0, CP0_STATUS - mfc0 t1, CP0_CAUSE - and t0, t1 - - andi t1, t0, 0x0800 # hardware interrupt 1 - bnez t1, _hwint1 - andi t1, t0, 0x4000 # hardware interrupt 4 - bnez t1, _hwint4 - andi t1, t0, 0x2000 # hardware interrupt 3 - bnez t1, _hwint3 - andi t1, t0, 0x1000 # hardware interrupt 2 - bnez t1, _hwint2 - andi t1, t0, 0x8000 # hardware interrupt 5 - bnez t1, _hwint5 - andi t1, t0, 0x0400 # hardware interrupt 0 - bnez t1, _hwint0 - nop - - j restore_all # spurious interrupt - nop - - ############################################################################## - -/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug - button interrupts. */ -_hwint0: jal pciasic_hwint0 - move a0, sp - j ret_from_irq - nop - -/* - * hwint 1 deals with EISA and SCSI interrupts - */ -_hwint1: jal pciasic_hwint1 - move a0, sp - j ret_from_irq - nop - - -/* - * This interrupt was used for the com1 console on the first prototypes; - * it's unsed otherwise - */ -_hwint2: jal pciasic_hwint2 - move a0, sp - j ret_from_irq - nop - -/* - * hwint 3 are the PCI interrupts A - D - */ -_hwint3: jal pciasic_hwint3 - move a0, sp - j ret_from_irq - nop - -/* - * hwint 4 is used for only the onboard PCnet 32. - */ -_hwint4: jal pciasic_hwint4 - move a0, sp - j ret_from_irq - nop - -/* hwint5 is the r4k count / compare interrupt */ -_hwint5: jal pciasic_hwint5 - move a0, sp - j ret_from_irq - nop - - END(sni_rm200_pci_handle_int) diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 952038aa4b90..7365b4853ddb 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -19,8 +19,6 @@ DEFINE_SPINLOCK(pciasic_lock); -extern asmlinkage void sni_rm200_pci_handle_int(void); - static void enable_pciasic_irq(unsigned int irq) { unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2); @@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = { * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug * button interrupts. Later ... */ -void pciasic_hwint0(struct pt_regs *regs) +static void pciasic_hwint0(struct pt_regs *regs) { panic("Received int0 but no handler yet ..."); } /* This interrupt was used for the com1 console on the first prototypes. */ -void pciasic_hwint2(struct pt_regs *regs) +static void pciasic_hwint2(struct pt_regs *regs) { /* I think this shouldn't happen on production machines. */ panic("hwint2 and no handler yet"); } /* hwint5 is the r4k count / compare interrupt */ -void pciasic_hwint5(struct pt_regs *regs) +static void pciasic_hwint5(struct pt_regs *regs) { panic("hwint5 and no handler yet"); } @@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x) * * The EISA_INT bit in CSITPEND is high active, all others are low active. */ -void pciasic_hwint1(struct pt_regs *regs) +static void pciasic_hwint1(struct pt_regs *regs) { u8 pend = *(volatile char *)PCIMT_CSITPEND; unsigned long flags; @@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs) /* * hwint 3 should deal with the PCI A - D interrupts, */ -void pciasic_hwint3(struct pt_regs *regs) +static void pciasic_hwint3(struct pt_regs *regs) { u8 pend = *(volatile char *)PCIMT_CSITPEND; int irq; @@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs) /* * hwint 4 is used for only the onboard PCnet 32. */ -void pciasic_hwint4(struct pt_regs *regs) +static void pciasic_hwint4(struct pt_regs *regs) { clear_c0_status(IE_IRQ4); do_IRQ(PCIMT_IRQ_ETHERNET, regs); set_c0_status(IE_IRQ4); } +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + static unsigned char led_cache; + + *(volatile unsigned char *) PCIMT_CSLED = ++led_cache; + + if (pending & 0x0800) + pciasic_hwint1(regs); + else if (pending & 0x4000) + pciasic_hwint4(regs); + else if (pending & 0x2000) + pciasic_hwint3(regs); + else if (pending & 0x1000) + pciasic_hwint2(regs); + else if (pending & 0x8000) + pciasic_hwint5(regs); + else if (pending & 0x0400) + pciasic_hwint0(regs); +} + void __init init_pciasic(void) { unsigned long flags; @@ -176,8 +195,6 @@ void __init arch_init_irq(void) { int i; - set_except_vector(0, sni_rm200_pci_handle_int); - init_i8259_irqs(); /* Integrated i8259 */ init_pciasic(); diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile index 8fa126b296e1..9cb9535ebacb 100644 --- a/arch/mips/tx4927/common/Makefile +++ b/arch/mips/tx4927/common/Makefile @@ -6,7 +6,7 @@ # unless it's something special (ie not a .c file). # -obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o tx4927_irq_handler.o +obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_KGDB) += tx4927_dbgio.o diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c index 5ab2e2b76018..8ca68015cf40 100644 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ b/arch/mips/tx4927/common/tx4927_irq.c @@ -525,8 +525,6 @@ static void tx4927_irq_pic_end(unsigned int irq) */ void __init tx4927_irq_init(void) { - extern asmlinkage void tx4927_irq_handler(void); - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n"); TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n"); @@ -535,16 +533,12 @@ void __init tx4927_irq_init(void) TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n"); tx4927_irq_pic_init(); - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, - "=Calling set_except_vector(tx4927_irq_handler)\n"); - set_except_vector(0, tx4927_irq_handler); - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n"); return; } -int tx4927_irq_nested(void) +static int tx4927_irq_nested(void) { int sw_irq = 0; u32 level2; @@ -582,3 +576,25 @@ int tx4927_irq_nested(void) return (sw_irq); } + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(TX4927_IRQ_CPU_TIMER, regs); + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + unsigned int irq = tx4927_irq_nested(); + + if (unlikely(irq == 0)) { + spurious_interrupt(regs); + return; + } + do_IRQ(irq, regs); + } else if (pending & STATUSF_IP0) /* user line 0 */ + do_IRQ(TX4927_IRQ_USER0, regs); + else if (pending & STATUSF_IP1) /* user line 1 */ + do_IRQ(TX4927_IRQ_USER1, regs); + else + spurious_interrupt(regs); +} diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S deleted file mode 100644 index dd3ceda9d712..000000000000 --- a/arch/mips/tx4927/common/tx4927_irq_handler.S +++ /dev/null @@ -1,103 +0,0 @@ -/* - * linux/arch/mips/tx4927/common/tx4927_irq_handler.S - * - * Primary interrupt handler for tx4927 based systems - * - * Author: MontaVista Software, Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/tx4927/tx4927.h> - - .align 5 - NESTED(tx4927_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 t0, CP0_CAUSE - mfc0 t1, CP0_STATUS - and t0, t1 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_ip7 - - /* IP6..IP3 multiplexed -- do not use */ - - andi t1, t0, STATUSF_IP2 /* tx4927 pic */ - bnez t1, ll_ip2 - - andi t1, t0, STATUSF_IP0 /* user line 0 */ - bnez t1, ll_ip0 - - andi t1, t0, STATUSF_IP1 /* user line 1 */ - bnez t1, ll_ip1 - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(tx4927_irq_handler) - - .align 5 - - -ll_ip7: - li a0, TX4927_IRQ_CPU_TIMER - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_ip2: - jal tx4927_irq_nested - nop - beqz v0, goto_spurious_interrupt - nop - move a0, v0 - move a1, sp - jal do_IRQ - j ret_from_irq - -goto_spurious_interrupt: - j spurious_interrupt - nop - -ll_ip1: - li a0, TX4927_IRQ_USER1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_ip0: - li a0, TX4927_IRQ_USER0 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile index 74c95c5bcdbf..2033ae77f632 100644 --- a/arch/mips/tx4938/common/Makefile +++ b/arch/mips/tx4938/common/Makefile @@ -6,6 +6,6 @@ # unless it's something special (ie not a .c file). # -obj-y += prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o +obj-y += prom.o setup.o irq.o rtc_rx5c348.o obj-$(CONFIG_KGDB) += dbgio.o diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index 4f90d7faf634..873805178d8e 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c @@ -392,11 +392,8 @@ tx4938_irq_pic_end(unsigned int irq) void __init tx4938_irq_init(void) { - extern asmlinkage void tx4938_irq_handler(void); - tx4938_irq_cp0_init(); tx4938_irq_pic_init(); - set_except_vector(0, tx4938_irq_handler); return; } @@ -422,3 +419,21 @@ tx4938_irq_nested(void) wbflush(); return (sw_irq); } + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(TX4938_IRQ_CPU_TIMER, regs); + else if (pending & STATUSF_IP2) { + int irq = tx4938_irq_nested(); + if (irq) + do_IRQ(irq, regs); + else + spurious_interrupt(regs); + } else if (pending & STATUSF_IP1) + do_IRQ(TX4938_IRQ_USER1, regs); + else if (pending & STATUSF_IP0) + do_IRQ(TX4938_IRQ_USER0, regs); +} diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S deleted file mode 100644 index 1b2f72bac42d..000000000000 --- a/arch/mips/tx4938/common/irq_handler.S +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/handler.S - * - * Primary interrupt handler for tx4938 based systems - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/tx4938/rbtx4938.h> - - - .align 5 - NESTED(tx4938_irq_handler, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 t0, CP0_CAUSE - mfc0 t1, CP0_STATUS - and t0, t1 - - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_ip7 - - /* IP6..IP3 multiplexed -- do not use */ - - andi t1, t0, STATUSF_IP2 /* tx4938 pic */ - bnez t1, ll_ip2 - - andi t1, t0, STATUSF_IP1 /* user line 1 */ - bnez t1, ll_ip1 - - andi t1, t0, STATUSF_IP0 /* user line 0 */ - bnez t1, ll_ip0 - - .set reorder - - nop - END(tx4938_irq_handler) - - .align 5 - - -ll_ip7: - li a0, TX4938_IRQ_CPU_TIMER - move a1, sp - jal do_IRQ - j ret_from_irq - - -ll_ip2: - jal tx4938_irq_nested - nop - beqz v0, goto_spurious_interrupt - nop - move a0, v0 - move a1, sp - jal do_IRQ - j ret_from_irq - -goto_spurious_interrupt: - j ret_from_irq - -ll_ip1: - li a0, TX4938_IRQ_USER1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_ip0: - li a0, TX4938_IRQ_USER0 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index a7add16c9aa4..055a2cdfc841 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -4,6 +4,8 @@ config CASIO_E55 select DMA_NONCOHERENT select IRQ_CPU select ISA + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config IBM_WORKPAD @@ -12,6 +14,8 @@ config IBM_WORKPAD select DMA_NONCOHERENT select IRQ_CPU select ISA + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config NEC_CMBVR4133 @@ -21,6 +25,9 @@ config NEC_CMBVR4133 select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN config ROCKHOPPER bool "Support for Rockhopper baseboard" @@ -34,6 +41,8 @@ config TANBAC_TB022X select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN help The TANBAC VR4131 multichip module(TB0225) and @@ -65,6 +74,8 @@ config VICTOR_MPC30X select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config ZAO_CAPCELLA @@ -73,6 +84,8 @@ config ZAO_CAPCELLA select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN config PCI_VR41XX diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile index 9096302a7ecc..aa373974c80f 100644 --- a/arch/mips/vr41xx/common/Makefile +++ b/arch/mips/vr41xx/common/Makefile @@ -2,7 +2,7 @@ # Makefile for common code of the NEC VR4100 series. # -obj-y += bcu.o cmu.o icu.o init.o int-handler.o irq.o pmu.o type.o +obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o obj-$(CONFIG_VRC4173) += vrc4173.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/vr41xx/common/int-handler.S b/arch/mips/vr41xx/common/int-handler.S deleted file mode 100644 index 2b6043f16d09..000000000000 --- a/arch/mips/vr41xx/common/int-handler.S +++ /dev/null @@ -1,114 +0,0 @@ -/* - * FILE NAME - * arch/mips/vr41xx/common/int-handler.S - * - * BRIEF MODULE DESCRIPTION - * Interrupt dispatcher for the NEC VR4100 series. - * - * Author: Yoichi Yuasa - * yyuasa@mvista.com or source@mvista.com - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -/* - * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> - * - New creation, NEC VR4100 series are supported. - * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> - * - Coped with INTASSIGN of NEC VR4133. - */ -#include <asm/asm.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/stackframe.h> - - .text - .set noreorder - - .align 5 - NESTED(vr41xx_handle_interrupt, PT_SIZE, ra) - .set noat - SAVE_ALL - CLI - .set at - .set noreorder - - /* - * Get the pending interrupts - */ - mfc0 t0, CP0_CAUSE - mfc0 t1, CP0_STATUS - andi t0, 0xff00 - and t0, t0, t1 - - andi t1, t0, CAUSEF_IP7 # MIPS timer interrupt - bnez t1, handle_irq - li a0, 7 - - andi t1, t0, 0x7800 # check for Int1-4 - beqz t1, 1f - - andi t1, t0, CAUSEF_IP3 # check for Int1 - bnez t1, handle_int - li a0, 3 - - andi t1, t0, CAUSEF_IP4 # check for Int2 - bnez t1, handle_int - li a0, 4 - - andi t1, t0, CAUSEF_IP5 # check for Int3 - bnez t1, handle_int - li a0, 5 - - andi t1, t0, CAUSEF_IP6 # check for Int4 - bnez t1, handle_int - li a0, 6 - -1: - andi t1, t0, CAUSEF_IP2 # check for Int0 - bnez t1, handle_int - li a0, 2 - - andi t1, t0, CAUSEF_IP0 # check for IP0 - bnez t1, handle_irq - li a0, 0 - - andi t1, t0, CAUSEF_IP1 # check for IP1 - bnez t1, handle_irq - li a0, 1 - - j spurious_interrupt - nop - -handle_int: - jal irq_dispatch - move a1, sp - j ret_from_irq - nop - -handle_irq: - jal do_IRQ - move a1, sp - j ret_from_irq - END(vr41xx_handle_interrupt) diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 61aa264275ff..86796bb63c3c 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -59,7 +59,7 @@ int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *) EXPORT_SYMBOL_GPL(cascade_irq); -asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) +static void irq_dispatch(unsigned int irq, struct pt_regs *regs) { irq_cascade_t *cascade; irq_desc_t *desc; @@ -84,11 +84,32 @@ asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) do_IRQ(irq, regs); } -extern asmlinkage void vr41xx_handle_interrupt(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) + do_IRQ(7, regs); + else if (pending & 0x7800) { + if (pending & CAUSEF_IP3) + irq_dispatch(3, regs); + else if (pending & CAUSEF_IP4) + irq_dispatch(4, regs); + else if (pending & CAUSEF_IP5) + irq_dispatch(5, regs); + else if (pending & CAUSEF_IP6) + irq_dispatch(6, regs); + } else if (pending & CAUSEF_IP2) + irq_dispatch(2, regs); + else if (pending & CAUSEF_IP0) + do_IRQ(0, regs); + else if (pending & CAUSEF_IP1) + do_IRQ(1, regs); + else + spurious_interrupt(regs); +} void __init arch_init_irq(void) { mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); - - set_except_vector(0, vr41xx_handle_interrupt); } diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 19f911c5dd58..910fb3afc0b5 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -138,6 +138,37 @@ config 64BIT enable this option otherwise. The 64bit kernel is significantly bigger and slower than the 32bit one. +choice + prompt "Kernel page size" + default PARISC_PAGE_SIZE_4KB if !64BIT + default PARISC_PAGE_SIZE_4KB if 64BIT +# default PARISC_PAGE_SIZE_16KB if 64BIT + +config PARISC_PAGE_SIZE_4KB + bool "4KB" + help + This lets you select the page size of the kernel. For best + performance, a page size of 16KB is recommended. For best + compatibility with 32bit applications, a page size of 4KB should be + selected (the vast majority of 32bit binaries work perfectly fine + with a larger page size). + + 4KB For best 32bit compatibility + 16KB For best performance + 64KB For best performance, might give more overhead. + + If you don't know what to do, choose 4KB. + +config PARISC_PAGE_SIZE_16KB + bool "16KB (EXPERIMENTAL)" + depends on PA8X00 && EXPERIMENTAL + +config PARISC_PAGE_SIZE_64KB + bool "64KB (EXPERIMENTAL)" + depends on PA8X00 && EXPERIMENTAL + +endchoice + config SMP bool "Symmetric multi-processing support" ---help--- diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index 59f7bc38e72e..b38b58eb9dc2 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-pa6 -# Sun Mar 26 19:50:07 2006 +# Linux kernel version: 2.6.16-pa10 +# Sun Apr 2 15:26:38 2006 # CONFIG_PARISC=y CONFIG_MMU=y @@ -25,7 +25,7 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set @@ -35,7 +35,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -57,7 +57,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # Block layer @@ -79,16 +85,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # -CONFIG_PA7000=y -# CONFIG_PA7100LC is not set +# CONFIG_PA7000 is not set +CONFIG_PA7100LC=y # CONFIG_PA7200 is not set # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y +CONFIG_PARISC_PAGE_SIZE_4KB=y +# CONFIG_PARISC_PAGE_SIZE_16KB is not set +# CONFIG_PARISC_PAGE_SIZE_64KB is not set # CONFIG_SMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -108,7 +117,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # Bus options (PCI, PCMCIA, EISA, GSC, ISA) # CONFIG_GSC=y -CONFIG_HPPB=y +# CONFIG_HPPB is not set CONFIG_IOMMU_CCIO=y CONFIG_GSC_LASI=y CONFIG_GSC_WAX=y @@ -126,7 +135,25 @@ CONFIG_IOMMU_SBA=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +CONFIG_PD6729=y +CONFIG_I82092=y +CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support @@ -145,7 +172,7 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m # # Networking @@ -159,13 +186,15 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -# CONFIG_NET_KEY is not set +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set @@ -173,19 +202,20 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_DIAG is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +CONFIG_INET6_TUNNEL=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETFILTER is not set @@ -207,7 +237,8 @@ CONFIG_IPV6=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set -# CONFIG_LLC2 is not set +CONFIG_LLC=m +CONFIG_LLC2=m # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set @@ -237,9 +268,9 @@ CONFIG_IPV6=y # # Generic Driver Options # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # @@ -256,13 +287,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Parallel port support # CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y +CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_1284 is not set +CONFIG_PARPORT_1284=y # # Plug and Play support @@ -284,7 +316,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=6144 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -292,7 +324,60 @@ CONFIG_BLK_DEV_INITRD=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +CONFIG_BLK_DEV_NS87415=y +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -375,6 +460,15 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_DEBUG is not set # +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# # Multi-device support (RAID and LVM) # CONFIG_MD=y @@ -382,12 +476,17 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID10=y CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set +CONFIG_MD_RAID6=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -411,10 +510,10 @@ CONFIG_MD_RAID5=y # Network device support # CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=m # # ARCnet devices @@ -430,7 +529,7 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=m CONFIG_LASI_82596=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -451,6 +550,8 @@ CONFIG_TULIP=y # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set +# CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -518,14 +619,33 @@ CONFIG_NET_RADIO=y # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set # # Wireless 802.11b ISA/PCI cards support # -# CONFIG_HERMES is not set +CONFIG_HERMES=y +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set # CONFIG_ATMEL is not set # +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=y +CONFIG_PCMCIA_SPECTRUM=y +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set + +# # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set @@ -533,13 +653,34 @@ CONFIG_NET_RADIO=y CONFIG_NET_WIRELESS=y # +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set -# CONFIG_PPP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set @@ -571,14 +712,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -586,52 +729,25 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_HIL_OLD is not set CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -# CONFIG_JOYSTICK_IFORCE is not set -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_DB9 is not set -# CONFIG_JOYSTICK_GAMECON is not set -# CONFIG_JOYSTICK_TURBOGRAFX is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_UINPUT is not set -CONFIG_HP_SDC_RTC=y +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_GSCPS2=y CONFIG_HP_SDC=y CONFIG_HIL_MLC=y # CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -648,7 +764,8 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=13 +CONFIG_SERIAL_8250_CS=y +CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y @@ -666,10 +783,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=y +CONFIG_LEGACY_PTY_COUNT=64 +CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set +CONFIG_PPDEV=m # CONFIG_TIPAR is not set # @@ -682,7 +799,7 @@ CONFIG_PRINTER=y # # CONFIG_WATCHDOG is not set CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -691,6 +808,13 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # # CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # @@ -718,10 +842,8 @@ CONFIG_GEN_RTC=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -749,8 +871,8 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -778,8 +900,8 @@ CONFIG_FB_STI=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=160 -CONFIG_DUMMY_CONSOLE_ROWS=64 +CONFIG_DUMMY_CONSOLE_COLUMNS=128 +CONFIG_DUMMY_CONSOLE_ROWS=48 CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_STI_CONSOLE=y @@ -816,13 +938,14 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -830,6 +953,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # # Generic devices # +CONFIG_SND_OPL3_LIB=y CONFIG_SND_AC97_CODEC=y CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set @@ -842,7 +966,7 @@ CONFIG_SND_AC97_BUS=y # PCI devices # CONFIG_SND_AD1889=y -# CONFIG_SND_AD1889_OPL3 is not set +CONFIG_SND_AD1889_OPL3=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -890,6 +1014,10 @@ CONFIG_SND_AD1889=y # CONFIG_SND_USB_AUDIO is not set # +# PCMCIA devices +# + +# # GSC devices # CONFIG_SND_HARMONY=y @@ -905,12 +1033,12 @@ CONFIG_SND_HARMONY=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -918,14 +1046,12 @@ CONFIG_USB_DEBUG=y # # USB Host Controller Drivers # -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # @@ -948,13 +1074,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Input Devices # -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set @@ -1020,8 +1144,8 @@ CONFIG_USB_MON=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set # # USB DSL modem support @@ -1058,7 +1182,7 @@ CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1066,7 +1190,7 @@ CONFIG_JBD=y CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1081,8 +1205,11 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1125,7 +1252,7 @@ CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1133,10 +1260,16 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1153,50 +1286,50 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y # # Profiling support # CONFIG_PROFILING=y -CONFIG_OPROFILE=y +CONFIG_OPROFILE=m # # Kernel hacking @@ -1204,7 +1337,7 @@ CONFIG_OPROFILE=y # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=15 +CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1217,42 +1350,43 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA is not set # # Security options # -# CONFIG_KEYS is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m # # Hardware crypto devices @@ -1261,7 +1395,9 @@ CONFIG_CRYPTO=y # # Library routines # -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index e23c4e1e3a25..c11a5bc7c067 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -288,8 +288,11 @@ int main(void) DEFINE(ASM_PGD_ENTRY_SIZE, PGD_ENTRY_SIZE); DEFINE(ASM_PMD_ENTRY_SIZE, PMD_ENTRY_SIZE); DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE); + DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT); DEFINE(ASM_PT_INITIAL, PT_INITIAL); DEFINE(ASM_PAGE_SIZE, PAGE_SIZE); + DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64); + DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128); BLANK(); DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip)); DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space)); diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 360b7391cb8c..c057ad7605ba 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -4,7 +4,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999 Helge Deller (07-13-1999) + * Copyright (C) 1999-2006 Helge Deller <deller@gmx.de> (07-13-1999) * Copyright (C) 1999 SuSE GmbH Nuernberg * Copyright (C) 2000 Philipp Rumpf (prumpf@tux.org) * @@ -358,5 +358,5 @@ void parisc_setup_cache_timing(void) if (!parisc_cache_flush_threshold) parisc_cache_flush_threshold = FLUSH_THRESHOLD; - printk("Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus()); + printk(KERN_INFO "Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus()); } diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 7c95d7663c29..d9e53cf0372b 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -502,18 +502,20 @@ * all ILP32 processes and all the kernel for machines with * under 4GB of memory) */ .macro L3_ptep pgd,pte,index,va,fault +#if PT_NLEVELS == 3 /* we might have a 2-Level scheme, e.g. with 16kb page size */ extrd,u \va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index copy %r0,\pte - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 ldw,s \index(\pgd),\pgd - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 bb,>=,n \pgd,_PxD_PRESENT_BIT,\fault - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 shld \pgd,PxD_VALUE_SHIFT,\index - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 copy \index,\pgd - extrd,u,*<> \va,31,32,%r0 + extrd,u,*<> \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 ldo ASM_PGD_PMD_OFFSET(\pgd),\pgd +#endif L2_ptep \pgd,\pte,\index,\va,\fault .endm @@ -563,10 +565,18 @@ extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0 depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */ - /* Get rid of prot bits and convert to page addr for iitlbt and idtlbt */ + /* Enforce uncacheable pages. + * This should ONLY be use for MMIO on PA 2.0 machines. + * Memory/DMA is cache coherent on all PA2.0 machines we support + * (that means T-class is NOT supported) and the memory controllers + * on most of those machines only handles cache transactions. + */ + extrd,u,*= \pte,_PAGE_NO_CACHE_BIT+32,1,%r0 + depi 1,12,1,\prot - depd %r0,63,PAGE_SHIFT,\pte - extrd,s \pte,(63-PAGE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte + /* Drop prot bits and convert to page addr for iitlbt and idtlbt */ + extrd,u \pte,(63-ASM_PFN_PTE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte + depdi _PAGE_SIZE_ENCODING_DEFAULT,63,63-58,\pte .endm /* Identical macro to make_insert_tlb above, except it @@ -584,9 +594,8 @@ /* Get rid of prot bits and convert to page addr for iitlba */ - depi 0,31,PAGE_SHIFT,\pte + depi _PAGE_SIZE_ENCODING_DEFAULT,31,ASM_PFN_PTE_SHIFT,\pte extru \pte,24,25,\pte - .endm /* This is for ILP32 PA2.0 only. The TLB insertion needs @@ -1201,10 +1210,9 @@ intr_save: */ /* adjust isr/ior. */ - - extrd,u %r16,63,7,%r1 /* get high bits from isr for ior */ - depd %r1,31,7,%r17 /* deposit them into ior */ - depdi 0,63,7,%r16 /* clear them from isr */ + extrd,u %r16,63,SPACEID_SHIFT,%r1 /* get high bits from isr for ior */ + depd %r1,31,SPACEID_SHIFT,%r17 /* deposit them into ior */ + depdi 0,63,SPACEID_SHIFT,%r16 /* clear them from isr */ #endif STREG %r16, PT_ISR(%r29) STREG %r17, PT_IOR(%r29) diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 0b47afc20690..3e79e62f7b0b 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -76,16 +76,16 @@ $bss_loop: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 - ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 + ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 stw %r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4) ldo ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4 #else /* 2-level page table, so pmd == pgd */ - ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 + ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 #endif /* Fill in pmd with enough pte directories */ @@ -99,7 +99,7 @@ $bss_loop: stw %r3,0(%r4) ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 @@ -107,13 +107,14 @@ $bss_loop: /* Now initialize the PTEs themselves */ - ldo _PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ + ldo 0+_PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ + ldi (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */ load32 PA(pg0),%r1 $pgt_fill_loop: STREGM %r3,ASM_PTE_ENTRY_SIZE(%r1) - ldo ASM_PAGE_SIZE(%r3),%r3 - bb,>= %r3,31-KERNEL_INITIAL_ORDER,$pgt_fill_loop + ldo (1<<PFN_PTE_SHIFT)(%r3),%r3 /* add one PFN */ + addib,> -1,%r11,$pgt_fill_loop nop /* Load the return address...er...crash 'n burn */ diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c index 7e898fd64415..8384bf9cecd2 100644 --- a/arch/parisc/kernel/init_task.c +++ b/arch/parisc/kernel/init_task.c @@ -53,17 +53,17 @@ union thread_union init_thread_union __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) = { INIT_THREAD_INFO(init_task) }; -#ifdef __LP64__ +#if PT_NLEVELS == 3 /* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout * with the first pmd adjacent to the pgd and below it. gcc doesn't actually * guarantee that global objects will be laid out in memory in the same order * as the order of declaration, so put these in different sections and use * the linker script to order them. */ -pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pmd"))) = { {0}, }; - +pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE))); #endif -pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pgd"))) = { {0}, }; -pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pte"))) = { {0}, }; + +pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE))); +pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE))); /* * Initial task structure. diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 7a4f07e8d3c3..f600556414d1 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -65,7 +65,7 @@ flush_tlb_all_local: */ /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */ - rsm PSW_SM_I, %r19 /* save I-bit state */ + rsm PSW_SM_I, %r19 /* save I-bit state */ load32 PA(1f), %r1 nop nop @@ -84,8 +84,7 @@ flush_tlb_all_local: rfi nop -1: ldil L%PA(cache_info), %r1 - ldo R%PA(cache_info)(%r1), %r1 +1: load32 PA(cache_info), %r1 /* Flush Instruction Tlb */ @@ -212,8 +211,7 @@ flush_instruction_cache_local: .entry mtsp %r0, %sr1 - ldil L%cache_info, %r1 - ldo R%cache_info(%r1), %r1 + load32 cache_info, %r1 /* Flush Instruction Cache */ @@ -254,8 +252,7 @@ flush_data_cache_local: .entry mtsp %r0, %sr1 - ldil L%cache_info, %r1 - ldo R%cache_info(%r1), %r1 + load32 cache_info, %r1 /* Flush Data Cache */ @@ -303,7 +300,8 @@ copy_user_page_asm: */ ldd 0(%r25), %r19 - ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ + ldi ASM_PAGE_SIZE_DIV128, %r1 + ldw 64(%r25), %r0 /* prefetch 1 cacheline ahead */ ldw 128(%r25), %r0 /* prefetch 2 */ @@ -368,7 +366,7 @@ copy_user_page_asm: * use ldd/std on a 32 bit kernel. */ ldw 0(%r25), %r19 - ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ + ldi ASM_PAGE_SIZE_DIV64, %r1 1: ldw 4(%r25), %r20 @@ -461,6 +459,7 @@ copy_user_page_asm: sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ ldil L%(TMPALIAS_MAP_START), %r28 + /* FIXME for different page sizes != 4k */ #ifdef CONFIG_64BIT extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ @@ -551,6 +550,7 @@ __clear_user_page_asm: #ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ + /* FIXME: page size dependend */ #endif extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ @@ -566,10 +566,10 @@ __clear_user_page_asm: pdtlb 0(%r28) #ifdef CONFIG_64BIT - ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ + ldi ASM_PAGE_SIZE_DIV128, %r1 /* PREFETCH (Write) has not (yet) been proven to help here */ -/* #define PREFETCHW_OP ldd 256(%0), %r0 */ + /* #define PREFETCHW_OP ldd 256(%0), %r0 */ 1: std %r0, 0(%r28) std %r0, 8(%r28) @@ -591,8 +591,7 @@ __clear_user_page_asm: ldo 128(%r28), %r28 #else /* ! CONFIG_64BIT */ - - ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ + ldi ASM_PAGE_SIZE_DIV64, %r1 1: stw %r0, 0(%r28) diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index d15a1d53e101..8b5df98e2b31 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -231,6 +231,14 @@ asmlinkage long parisc_fadvise64_64(int fd, (loff_t)high_len << 32 | low_len, advice); } +asmlinkage long parisc_sync_file_range(int fd, + u32 hi_off, u32 lo_off, u32 hi_nbytes, u32 lo_nbytes, + unsigned int flags) +{ + return sys_sync_file_range(fd, (loff_t)hi_off << 32 | lo_off, + (loff_t)hi_nbytes << 32 | lo_nbytes, flags); +} + asmlinkage unsigned long sys_alloc_hugepages(int key, unsigned long addr, unsigned long len, int prot, int flag) { return -ENOMEM; diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index af88afef41bd..479d9a017cd1 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -55,7 +55,7 @@ * pointers. */ - .align 4096 + .align ASM_PAGE_SIZE linux_gateway_page: /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */ @@ -632,7 +632,7 @@ cas_action: end_compare_and_swap: /* Make sure nothing else is placed on this page */ - .align 4096 + .align ASM_PAGE_SIZE .export end_linux_gateway_page end_linux_gateway_page: @@ -652,7 +652,7 @@ end_linux_gateway_page: .section .rodata,"a" - .align 4096 + .align ASM_PAGE_SIZE /* Light-weight-syscall table */ /* Start of lws table. */ .export lws_table @@ -662,14 +662,14 @@ lws_table: LWS_ENTRY(compare_and_swap64) /* 1 - ELF64 Atomic compare and swap */ /* End of lws table */ - .align 4096 + .align ASM_PAGE_SIZE .export sys_call_table .Lsys_call_table: sys_call_table: #include "syscall_table.S" #ifdef CONFIG_64BIT - .align 4096 + .align ASM_PAGE_SIZE .export sys_call_table64 .Lsys_call_table64: sys_call_table64: diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index bbeeb614cfab..e27b432f90a8 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -13,7 +13,7 @@ * Copyright (C) 2001 Helge Deller <deller at parisc-linux.org> * Copyright (C) 2000-2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org> * Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org> - * + * Copyright (C) 2005-2006 Kyle McMartin <kyle at parisc-linux.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -393,5 +393,11 @@ ENTRY_SAME(readlinkat) /* 285 */ ENTRY_SAME(fchmodat) ENTRY_SAME(faccessat) + ENTRY_SAME(unshare) + ENTRY_COMP(set_robust_list) + ENTRY_COMP(get_robust_list) /* 290 */ + ENTRY_SAME(splice) + ENTRY_OURS(sync_file_range) + ENTRY_SAME(tee) /* Nothing yet */ diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 6d6436a6b624..94dcc03a28ed 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ * Copyright (C) 2000 Michael Ang <mang with subcarrier.org> * Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org> * Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org> + * Copyright (C) 2006 Helge Deller <deller@gmx.de> * * * This program is free software; you can redistribute it and/or modify @@ -27,6 +28,7 @@ /* needed for the processor specific cache alignment size */ #include <asm/cache.h> #include <asm/page.h> +#include <asm/asm-offsets.h> /* ld script to make hppa Linux kernel */ #ifndef CONFIG_64BIT @@ -68,7 +70,7 @@ SECTIONS RODATA /* writeable */ - . = ALIGN(4096); /* Make sure this is page aligned so + . = ALIGN(ASM_PAGE_SIZE); /* Make sure this is page aligned so that we can properly leave these as writable */ data_start = .; @@ -81,23 +83,17 @@ SECTIONS __start___unwind = .; /* unwind info */ .PARISC.unwind : { *(.PARISC.unwind) } __stop___unwind = .; - + + /* rarely changed data like cpu maps */ + . = ALIGN(16); + .data.read_mostly : { *(.data.read_mostly) } + + . = ALIGN(L1_CACHE_BYTES); .data : { /* Data */ *(.data) - *(.data.vm0.pmd) - *(.data.vm0.pgd) - *(.data.vm0.pte) CONSTRUCTORS } - . = ALIGN(4096); - /* nosave data is really only used for software suspend...it's here - * just in case we ever implement it */ - __nosave_begin = .; - .data_nosave : { *(.data.nosave) } - . = ALIGN(4096); - __nosave_end = .; - . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : { *(.data.cacheline_aligned) } @@ -105,12 +101,29 @@ SECTIONS . = ALIGN(16); .data.lock_aligned : { *(.data.lock_aligned) } - /* rarely changed data like cpu maps */ - . = ALIGN(16); - .data.read_mostly : { *(.data.read_mostly) } + . = ALIGN(ASM_PAGE_SIZE); + /* nosave data is really only used for software suspend...it's here + * just in case we ever implement it */ + __nosave_begin = .; + .data_nosave : { *(.data.nosave) } + . = ALIGN(ASM_PAGE_SIZE); + __nosave_end = .; _edata = .; /* End of data section */ + __bss_start = .; /* BSS */ + /* page table entries need to be PAGE_SIZE aligned */ + . = ALIGN(ASM_PAGE_SIZE); + .data.vmpages : { + *(.data.vm0.pmd) + *(.data.vm0.pgd) + *(.data.vm0.pte) + } + .bss : { *(.bss) *(COMMON) } + __bss_stop = .; + + + /* assembler code expects init_task to be 16k aligned */ . = ALIGN(16384); /* init_task */ .data.init_task : { *(.data.init_task) } @@ -126,6 +139,7 @@ SECTIONS .dlt : { *(.dlt) } #endif + /* reserve space for interrupt stack by aligning __init* to 16k */ . = ALIGN(16384); __init_begin = .; .init.text : { @@ -166,7 +180,7 @@ SECTIONS from .altinstructions and .eh_frame */ .exit.text : { *(.exit.text) } .exit.data : { *(.exit.data) } - . = ALIGN(4096); + . = ALIGN(ASM_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; @@ -174,14 +188,10 @@ SECTIONS __per_cpu_start = .; .data.percpu : { *(.data.percpu) } __per_cpu_end = .; - . = ALIGN(4096); + . = ALIGN(ASM_PAGE_SIZE); __init_end = .; /* freed after init ends here */ - __bss_start = .; /* BSS */ - .bss : { *(.bss) *(COMMON) } - __bss_stop = .; - _end = . ; /* Sections to be discarded */ diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 0ad945d4c0a4..64785e46f93b 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -186,7 +186,7 @@ good_area: break; case VM_FAULT_SIGBUS: /* - * We hit a hared mapping outside of the file, or some + * We hit a shared mapping outside of the file, or some * other thing happened to us that made us unable to * handle the page fault gracefully. */ diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 3796be67cd53..631712562656 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -6,6 +6,7 @@ * changed by Philipp Rumpf * Copyright 1999 Philipp Rumpf (prumpf@tux.org) * Copyright 2004 Randolph Chung (tausq@debian.org) + * Copyright 2006 Helge Deller (deller@gmx.de) * */ @@ -371,8 +372,8 @@ static void __init setup_bootmem(void) void free_initmem(void) { - unsigned long addr; - + unsigned long addr, init_begin, init_end; + printk(KERN_INFO "Freeing unused kernel memory: "); #ifdef CONFIG_DEBUG_KERNEL @@ -395,8 +396,11 @@ void free_initmem(void) local_irq_enable(); #endif - addr = (unsigned long)(&__init_begin); - for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { + /* align __init_begin and __init_end to page size, + ignoring linker script where we might have tried to save RAM */ + init_begin = PAGE_ALIGN((unsigned long)(&__init_begin)); + init_end = PAGE_ALIGN((unsigned long)(&__init_end)); + for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); @@ -407,7 +411,7 @@ void free_initmem(void) /* set up a new led state on systems shipped LED State panel */ pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE); - printk("%luk freed\n", (unsigned long)(&__init_end - &__init_begin) >> 10); + printk("%luk freed\n", (init_end - init_begin) >> 10); } @@ -639,11 +643,13 @@ static void __init map_pages(unsigned long start_vaddr, unsigned long start_padd * Map the fault vector writable so we can * write the HPMC checksum. */ +#if defined(CONFIG_PARISC_PAGE_SIZE_4KB) if (address >= ro_start && address < ro_end && address != fv_addr && address != gw_addr) pte = __mk_pte(address, PAGE_KERNEL_RO); else +#endif pte = __mk_pte(address, pgprot); if (address >= end_paddr) @@ -874,8 +880,7 @@ unsigned long alloc_sid(void) flush_tlb_all(); /* flush_tlb_all() calls recycle_sids() */ spin_lock(&sid_lock); } - if (free_space_ids == 0) - BUG(); + BUG_ON(free_space_ids == 0); } free_space_ids--; @@ -899,8 +904,7 @@ void free_sid(unsigned long spaceid) spin_lock(&sid_lock); - if (*dirty_space_offset & (1L << index)) - BUG(); /* attempt to free space id twice */ + BUG_ON(*dirty_space_offset & (1L << index)); /* attempt to free space id twice */ *dirty_space_offset |= (1L << index); dirty_space_ids++; @@ -975,7 +979,7 @@ static void recycle_sids(void) static unsigned long recycle_ndirty; static unsigned long recycle_dirty_array[SID_ARRAY_SIZE]; -static unsigned int recycle_inuse = 0; +static unsigned int recycle_inuse; void flush_tlb_all(void) { @@ -984,9 +988,7 @@ void flush_tlb_all(void) do_recycle = 0; spin_lock(&sid_lock); if (dirty_space_ids > RECYCLE_THRESHOLD) { - if (recycle_inuse) { - BUG(); /* FIXME: Use a semaphore/wait queue here */ - } + BUG_ON(recycle_inuse); /* FIXME: Use a semaphore/wait queue here */ get_dirty_sids(&recycle_ndirty,recycle_dirty_array); recycle_inuse++; do_recycle++; diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c index 0db12818d7bc..27384567a1d0 100644 --- a/arch/parisc/mm/ioremap.c +++ b/arch/parisc/mm/ioremap.c @@ -2,7 +2,7 @@ * arch/parisc/mm/ioremap.c * * (C) Copyright 1995 1996 Linus Torvalds - * (C) Copyright 2001 Helge Deller <deller@gmx.de> + * (C) Copyright 2001-2006 Helge Deller <deller@gmx.de> * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org> */ @@ -138,6 +138,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l if ((phys_addr >= 0x00080000 && end < 0x000fffff) || (phys_addr >= 0x00500000 && end < 0x03bfffff)) { phys_addr |= F_EXTEND(0xfc000000); + flags |= _PAGE_NO_CACHE; } #endif diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 167e70e95556..6729c98b66f9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -366,6 +366,7 @@ config PPC_PMAC64 select U3_DART select MPIC_BROKEN_U3 select GENERIC_TBSYNC + select PPC_970_NAP default y config PPC_PREP @@ -383,6 +384,7 @@ config PPC_MAPLE select MPIC_BROKEN_U3 select GENERIC_TBSYNC select PPC_UDBG_16550 + select PPC_970_NAP default n help This option enables support for the Maple 970FX Evaluation Board. @@ -457,6 +459,10 @@ config PPC_MPC106 bool default n +config PPC_970_NAP + bool + default n + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6ec84d37a337..ed5b26aa8be3 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -104,6 +104,10 @@ ifndef CONFIG_FSL_BOOKE CFLAGS += -mstring endif +ifeq ($(CONFIG_6xx),y) +CFLAGS += -mcpu=powerpc +endif + cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index fe22e54ab2b0..dbe421dc3c11 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +56,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y CONFIG_CELL_IIC=y # CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -242,6 +240,7 @@ CONFIG_IPV6=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -766,10 +763,6 @@ CONFIG_I2C_ALGOBIT=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -818,6 +811,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # CONFIG_INFINIBAND=y @@ -834,6 +840,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -889,7 +900,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 2c3fd2007676..a45627547d03 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Fri Feb 10 17:33:08 2006 +# Linux kernel version: 2.6.17-rc1 +# Wed Apr 19 13:24:37 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -29,6 +30,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 @@ -53,6 +55,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -67,10 +70,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -82,7 +81,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -91,6 +89,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -185,7 +184,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -227,6 +225,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -238,6 +237,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -261,6 +262,7 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m # @@ -513,6 +515,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -761,7 +764,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -772,6 +774,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y @@ -813,7 +816,6 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -832,9 +834,7 @@ CONFIG_I2C_POWERMAC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -862,10 +862,6 @@ CONFIG_I2C_POWERMAC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -874,6 +870,7 @@ CONFIG_I2C_POWERMAC=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -883,6 +880,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -901,7 +899,6 @@ CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set @@ -958,9 +955,11 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -977,6 +976,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # PCI devices # # CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set @@ -1009,6 +1009,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -1041,6 +1042,7 @@ CONFIG_SND_USB_AUDIO=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1068,7 +1070,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y @@ -1126,15 +1127,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # CONFIG_USB_CATC=m @@ -1194,6 +1186,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m @@ -1237,17 +1230,23 @@ CONFIG_USB_EZUSB=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1319,7 +1318,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 1816a46742f6..a95e455a1944 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:52 2006 +# Linux kernel version: 2.6.17-rc1 +# Wed Apr 19 11:46:44 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -30,6 +31,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 @@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -165,7 +164,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -207,6 +205,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -218,6 +217,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -236,11 +237,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -262,20 +266,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +# CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -479,6 +482,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -702,7 +706,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -751,10 +754,6 @@ CONFIG_MAX_RAW_DEVS=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -779,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -796,6 +796,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -805,6 +810,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -878,7 +888,6 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index daaf038a1faa..58e68ce09b0f 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Fri Feb 10 17:33:32 2006 +# Linux kernel version: 2.6.17-rc1 +# Wed Apr 19 11:48:00 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -30,6 +31,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=128 @@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -188,7 +187,6 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -235,6 +233,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -246,6 +245,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -272,6 +273,7 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m # @@ -519,6 +521,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -750,6 +753,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -767,7 +771,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set +CONFIG_HVC_DRIVER=y CONFIG_HVC_CONSOLE=y +# CONFIG_HVC_RTAS is not set CONFIG_HVCS=m # @@ -779,7 +785,6 @@ CONFIG_HVCS=m # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -830,7 +835,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -849,9 +853,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -879,10 +881,6 @@ CONFIG_I2C_ALGOBIT=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -891,6 +889,7 @@ CONFIG_I2C_ALGOBIT=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -900,6 +899,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -919,7 +919,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y # CONFIG_FB_MATROX_I2C is not set CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set @@ -968,6 +967,7 @@ CONFIG_LCD_DEVICE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1048,15 +1048,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1109,6 +1100,11 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# # InfiniBand support # CONFIG_INFINIBAND=m @@ -1121,12 +1117,13 @@ CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_SRP is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1202,7 +1199,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 0cc0995b81b0..803858e86160 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ firmware.o sysfs.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o -obj-$(CONFIG_POWER4) += idle_power4.o +obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o prom_parse.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 54b48f330051..8f85c5e8a55a 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -91,6 +91,7 @@ int main(void) #endif /* CONFIG_PPC64 */ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 39e348a3ade2..3f7182db9ed5 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) +#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\ + PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) @@ -263,6 +265,20 @@ struct cpu_spec cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, + { /* Power6 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003e0000, + .cpu_name = "POWER6", + .cpu_features = CPU_FTRS_POWER6, + .cpu_user_features = COMMON_USER_POWER6, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .cpu_setup = __setup_cpu_power4, + .oprofile_cpu_type = "ppc64/power6", + .oprofile_type = PPC_OPROFILE_POWER4, + .platform = "power6", + }, { /* Cell Broadband Engine */ .pvr_mask = 0xffff0000, .pvr_value = 0x00700000, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index b3a979467225..8866fd26c6b9 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -128,37 +128,36 @@ transfer_to_handler: stw r12,4(r11) #endif b 3f + 2: /* if from kernel, check interrupted DOZE/NAP mode and * check for stack overflow */ + lwz r9,THREAD_INFO-THREAD(r12) + cmplw r1,r9 /* if r1 <= current->thread_info */ + ble- stack_ovf /* then the kernel stack overflowed */ +5: #ifdef CONFIG_6xx - mfspr r11,SPRN_HID0 - mtcr r11 -BEGIN_FTR_SECTION - bt- 8,4f /* Check DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - bt- 9,4f /* Check NAP */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) + tophys(r9,r9) /* check local flags */ + lwz r12,TI_LOCAL_FLAGS(r9) + mtcrf 0x01,r12 + bt- 31-TLF_NAPPING,4f #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont transfer_to_handler_cont: - lwz r11,THREAD_INFO-THREAD(r12) - cmplw r1,r11 /* if r1 <= current->thread_info */ - ble- stack_ovf /* then the kernel stack overflowed */ 3: mflr r9 lwz r11,0(r9) /* virtual address of handler */ lwz r9,4(r9) /* where to go when done */ - FIX_SRR1(r10,r12) mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r10 mtlr r9 SYNC RFI /* jump to handler, enable MMU */ -#ifdef CONFIG_6xx -4: b power_save_6xx_restore +#ifdef CONFIG_6xx +4: rlwinm r12,r12,0,~_TLF_NAPPING + stw r12,TI_LOCAL_FLAGS(r9) + b power_save_6xx_restore #endif /* @@ -167,10 +166,10 @@ transfer_to_handler_cont: */ stack_ovf: /* sometimes we use a statically-allocated stack, which is OK. */ - lis r11,_end@h - ori r11,r11,_end@l - cmplw r1,r11 - ble 3b /* r1 <= &_end is OK */ + lis r12,_end@h + ori r12,r12,_end@l + cmplw r1,r12 + ble 5b /* r1 <= &_end is OK */ SAVE_NVGPRS(r11) addi r3,r1,STACK_FRAME_OVERHEAD lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index a5ae04a57c78..b7d140430a41 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -376,11 +376,28 @@ label##_common: \ bl hdlr; \ b .ret_from_except +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + #define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ .align 7; \ .globl label##_common; \ label##_common: \ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ DISABLE_INTS; \ bl .ppc64_runlatch_on; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ @@ -388,6 +405,25 @@ label##_common: \ b .ret_from_except_lite /* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +/* * Start of pSeries system interrupt routines */ . = 0x100 @@ -772,6 +808,7 @@ hardware_interrupt_iSeries_masked: .globl machine_check_common machine_check_common: EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) + FINISH_NAP DISABLE_INTS bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD @@ -783,7 +820,7 @@ machine_check_common: STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception) + STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception) STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) #ifdef CONFIG_ALTIVEC STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) @@ -1034,6 +1071,7 @@ unrecov_slb: .globl hardware_interrupt_entry hardware_interrupt_common: EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) + FINISH_NAP hardware_interrupt_entry: DISABLE_INTS bl .ppc64_runlatch_on @@ -1041,6 +1079,15 @@ hardware_interrupt_entry: bl .do_IRQ b .ret_from_except_lite +#ifdef CONFIG_PPC_970_NAP +power4_fixup_nap: + andc r9,r9,r10 + std r9,TI_LOCAL_FLAGS(r11) + ld r10,_LINK(r1) /* make idle task do the */ + std r10,_NIP(r1) /* equivalent of a blr */ + blr +#endif + .align 7 .globl alignment_common alignment_common: diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index e9f321d74d85..d491052c8e0c 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -50,9 +50,9 @@ void cpu_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - ppc64_runlatch_off(); - while (!need_resched() && !cpu_should_die()) { + ppc64_runlatch_off(); + if (ppc_md.power_save) { clear_thread_flag(TIF_POLLING_NRFLAG); /* diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S index 12a4efbaa08f..b45fa0e37212 100644 --- a/arch/powerpc/kernel/idle_6xx.S +++ b/arch/powerpc/kernel/idle_6xx.S @@ -22,8 +22,6 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> -#undef DEBUG - .text /* @@ -109,12 +107,6 @@ BEGIN_FTR_SECTION dcbf 0,r4 dcbf 0,r4 END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -#ifdef DEBUG - lis r6,nap_enter_count@ha - lwz r4,nap_enter_count@l(r6) - addi r4,r4,1 - stw r4,nap_enter_count@l(r6) -#endif 2: BEGIN_FTR_SECTION /* Go to low speed mode on some 750FX */ @@ -144,48 +136,42 @@ BEGIN_FTR_SECTION DSSALL sync END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + rlwinm r9,r1,0,0,31-THREAD_SHIFT /* current thread_info */ + lwz r8,TI_LOCAL_FLAGS(r9) /* set napping bit */ + ori r8,r8,_TLF_NAPPING /* so when we take an exception */ + stw r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */ mfmsr r7 ori r7,r7,MSR_EE oris r7,r7,MSR_POW@h - sync - isync +1: sync mtmsr r7 isync - sync - blr - + b 1b + /* * Return from NAP/DOZE mode, restore some CPU specific registers, * we are called with DR/IR still off and r2 containing physical - * address of current. + * address of current. R11 points to the exception frame (physical + * address). We have to preserve r10. */ _GLOBAL(power_save_6xx_restore) - mfspr r11,SPRN_HID0 - rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */ - cror 4*cr1+eq,4*cr0+eq,4*cr0+eq -BEGIN_FTR_SECTION - rlwinm r11,r11,0,9,7 /* Clear DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - mtspr SPRN_HID0, r11 + lwz r9,_LINK(r11) /* interrupted in ppc6xx_idle: */ + stw r9,_NIP(r11) /* make it do a blr */ -#ifdef DEBUG - beq cr1,1f - lis r11,(nap_return_count-KERNELBASE)@ha - lwz r9,nap_return_count@l(r11) - addi r9,r9,1 - stw r9,nap_return_count@l(r11) -1: -#endif - - rlwinm r9,r1,0,0,18 - tophys(r9,r9) - lwz r11,TI_CPU(r9) +#ifdef CONFIG_SMP + mfspr r12,SPRN_SPRG3 + lwz r11,TI_CPU(r12) /* get cpu number * 4 */ slwi r11,r11,2 +#else + li r11,0 +#endif /* Todo make sure all these are in the same page - * and load r22 (@ha part + CPU offset) only once + * and load r11 (@ha part + CPU offset) only once */ BEGIN_FTR_SECTION - beq cr1,1f + mfspr r9,SPRN_HID0 + andis. r9,r9,HID0_NAP@h + beq 1f addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha lwz r9,nap_save_msscr0@l(r9) mtspr SPRN_MSSCR0, r9 @@ -210,10 +196,3 @@ _GLOBAL(nap_save_hid1) _GLOBAL(powersave_lowspeed) .long 0 - -#ifdef DEBUG -_GLOBAL(nap_enter_count) - .space 4 -_GLOBAL(nap_return_count) - .space 4 -#endif diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index 6dad1c02496e..d85c7c938eed 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -35,12 +35,16 @@ BEGIN_FTR_SECTION DSSALL sync END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + clrrdi r9,r1,THREAD_SHIFT /* current thread_info */ + ld r8,TI_LOCAL_FLAGS(r9) /* set napping bit */ + ori r8,r8,_TLF_NAPPING /* so when we take an exception */ + std r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */ mfmsr r7 ori r7,r7,MSR_EE oris r7,r7,MSR_POW@h - sync +1: sync isync mtmsrd r7 isync - sync - blr + b 1b + diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index d9a7fdef59b9..4eba60a32890 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -61,6 +61,7 @@ __setup("iommu=", setup_iommu); static unsigned long iommu_range_alloc(struct iommu_table *tbl, unsigned long npages, unsigned long *handle, + unsigned long mask, unsigned int align_order) { unsigned long n, end, i, start; @@ -97,9 +98,21 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl, */ if (start >= limit) start = largealloc ? tbl->it_largehint : tbl->it_hint; - + again: + if (limit + tbl->it_offset > mask) { + limit = mask - tbl->it_offset + 1; + /* If we're constrained on address range, first try + * at the masked hint to avoid O(n) search complexity, + * but on second pass, start at 0. + */ + if ((start & mask) >= limit || pass > 0) + start = 0; + else + start &= mask; + } + n = find_next_zero_bit(tbl->it_map, limit, start); /* Align allocation */ @@ -150,14 +163,14 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl, static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page, unsigned int npages, enum dma_data_direction direction, - unsigned int align_order) + unsigned long mask, unsigned int align_order) { unsigned long entry, flags; dma_addr_t ret = DMA_ERROR_CODE; - + spin_lock_irqsave(&(tbl->it_lock), flags); - entry = iommu_range_alloc(tbl, npages, NULL, align_order); + entry = iommu_range_alloc(tbl, npages, NULL, mask, align_order); if (unlikely(entry == DMA_ERROR_CODE)) { spin_unlock_irqrestore(&(tbl->it_lock), flags); @@ -236,7 +249,7 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, int iommu_map_sg(struct device *dev, struct iommu_table *tbl, struct scatterlist *sglist, int nelems, - enum dma_data_direction direction) + unsigned long mask, enum dma_data_direction direction) { dma_addr_t dma_next = 0, dma_addr; unsigned long flags; @@ -274,7 +287,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, vaddr = (unsigned long)page_address(s->page) + s->offset; npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK); npages >>= PAGE_SHIFT; - entry = iommu_range_alloc(tbl, npages, &handle, 0); + entry = iommu_range_alloc(tbl, npages, &handle, mask >> PAGE_SHIFT, 0); DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); @@ -479,7 +492,8 @@ void iommu_free_table(struct device_node *dn) * byte within the page as vaddr. */ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, - size_t size, enum dma_data_direction direction) + size_t size, unsigned long mask, + enum dma_data_direction direction) { dma_addr_t dma_handle = DMA_ERROR_CODE; unsigned long uaddr; @@ -492,7 +506,8 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, npages >>= PAGE_SHIFT; if (tbl) { - dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0); + dma_handle = iommu_alloc(tbl, vaddr, npages, direction, + mask >> PAGE_SHIFT, 0); if (dma_handle == DMA_ERROR_CODE) { if (printk_ratelimit()) { printk(KERN_INFO "iommu_alloc failed, " @@ -521,7 +536,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, * to the dma address (mapping) of the first page. */ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, unsigned long mask, gfp_t flag) { void *ret = NULL; dma_addr_t mapping; @@ -551,7 +566,8 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, memset(ret, 0, size); /* Set up tces to cover the allocated range */ - mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order); + mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, + mask >> PAGE_SHIFT, order); if (mapping == DMA_ERROR_CODE) { free_pages((unsigned long)ret, order); ret = NULL; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index bb5c9501234c..57d560c68897 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -272,18 +272,26 @@ unsigned int virt_irq_to_real_map[NR_IRQS]; * Don't use virtual irqs 0, 1, 2 for devices. * The pcnet32 driver considers interrupt numbers < 2 to be invalid, * and 2 is the XICS IPI interrupt. - * We limit virtual irqs to 17 less than NR_IRQS so that when we - * offset them by 16 (to reserve the first 16 for ISA interrupts) - * we don't end up with an interrupt number >= NR_IRQS. + * We limit virtual irqs to __irq_offet_value less than virt_irq_max so + * that when we offset them we don't end up with an interrupt + * number >= virt_irq_max. */ #define MIN_VIRT_IRQ 3 -#define MAX_VIRT_IRQ (NR_IRQS - NUM_ISA_INTERRUPTS - 1) -#define NR_VIRT_IRQS (MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1) + +unsigned int virt_irq_max; +static unsigned int max_virt_irq; +static unsigned int nr_virt_irqs; void virt_irq_init(void) { int i; + + if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1))) + virt_irq_max = NR_IRQS - 1; + max_virt_irq = virt_irq_max - __irq_offset_value; + nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1; + for (i = 0; i < NR_IRQS; i++) virt_irq_to_real_map[i] = UNDEFINED_IRQ; } @@ -308,17 +316,17 @@ int virt_irq_create_mapping(unsigned int real_irq) return real_irq; } - /* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */ + /* map to a number between MIN_VIRT_IRQ and max_virt_irq */ virq = real_irq; - if (virq > MAX_VIRT_IRQ) - virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; + if (virq > max_virt_irq) + virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ; /* search for this number or a free slot */ first_virq = virq; while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) { if (virt_irq_to_real_map[virq] == real_irq) return virq; - if (++virq > MAX_VIRT_IRQ) + if (++virq > max_virt_irq) virq = MIN_VIRT_IRQ; if (virq == first_virq) goto nospace; /* oops, no free slots */ @@ -330,8 +338,8 @@ int virt_irq_create_mapping(unsigned int real_irq) nospace: if (!warned) { printk(KERN_CRIT "Interrupt table is full\n"); - printk(KERN_CRIT "Increase NR_IRQS (currently %d) " - "in your kernel sources and rebuild.\n", NR_IRQS); + printk(KERN_CRIT "Increase virt_irq_max (currently %d) " + "in your kernel sources and rebuild.\n", virt_irq_max); warned = 1; } return NO_IRQ; @@ -349,8 +357,8 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) virq = real_irq; - if (virq > MAX_VIRT_IRQ) - virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; + if (virq > max_virt_irq) + virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ; first_virq = virq; @@ -360,7 +368,7 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) virq++; - if (virq >= MAX_VIRT_IRQ) + if (virq >= max_virt_irq) virq = 0; } while (first_virq != virq); diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index ad7a90212204..f78866367b70 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -88,34 +88,34 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) mutex_unlock(&kprobe_mutex); } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { - kprobe_opcode_t insn = *p->ainsn.insn; - regs->msr |= MSR_SE; - /* single step inline if it is a trap variant */ - if (is_trap(insn)) - regs->nip = (unsigned long)p->addr; - else - regs->nip = (unsigned long)p->ainsn.insn; + /* + * On powerpc we should single step on the original + * instruction even if the probed insn is a trap + * variant as values in regs could play a part in + * if the trap is taken or not + */ + regs->nip = (unsigned long)p->ainsn.insn; } -static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); kcb->prev_kprobe.status = kcb->kprobe_status; kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; } -static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; kcb->kprobe_status = kcb->prev_kprobe.status; kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, +static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = p; @@ -141,7 +141,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, } } -static inline int kprobe_handler(struct pt_regs *regs) +static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; @@ -334,7 +334,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) regs->nip = (unsigned long)p->addr + 4; } -static inline int post_kprobe_handler(struct pt_regs *regs) +static int __kprobes post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); @@ -370,7 +370,7 @@ out: return 1; } -static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 928b8581fcb0..ba34001fca8e 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr, (void *)hdr + sechdrs[sechdrs[i].sh_link].sh_offset); } - if (!me->arch.stubs_section || !me->arch.toc_section) { - printk("%s: doesn't contain .toc or .stubs.\n", me->name); + + if (!me->arch.stubs_section) { + printk("%s: doesn't contain .stubs.\n", me->name); return -ENOEXEC; } + /* If we don't have a .toc, just use .stubs. We need to set r2 + to some reasonable value in case the module calls out to + other functions via a stub, or if a function pointer escapes + the module by some means. */ + if (!me->arch.toc_section) + me->arch.toc_section = me->arch.stubs_section; + /* Override the stubs size */ sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); return 0; @@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_PPC64_TOC16: - /* Subtact TOC pointer */ + /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); if (value + 0x8000 > 0xffff) { printk("%s: bad TOC16 relocation (%lu)\n", @@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_PPC64_TOC16_DS: - /* Subtact TOC pointer */ + /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); if ((value & 3) != 0 || value + 0x8000 > 0xffff) { printk("%s: bad TOC16_DS relocation (%lu)\n", diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c index c336f3e31cff..c1d95e14bbed 100644 --- a/arch/powerpc/kernel/pci_iommu.c +++ b/arch/powerpc/kernel/pci_iommu.c @@ -59,6 +59,25 @@ static inline struct iommu_table *devnode_table(struct device *dev) } +static inline unsigned long device_to_mask(struct device *hwdev) +{ + struct pci_dev *pdev; + + if (!hwdev) { + pdev = ppc64_isabridge_dev; + if (!pdev) /* This is the best guess we can do */ + return 0xfffffffful; + } else + pdev = to_pci_dev(hwdev); + + if (pdev->dma_mask) + return pdev->dma_mask; + + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} + + /* Allocates a contiguous real buffer and creates mappings over it. * Returns the virtual address of the buffer and sets dma_handle * to the dma address (mapping) of the first page. @@ -67,7 +86,7 @@ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, - flag); + device_to_mask(hwdev), flag); } static void pci_iommu_free_coherent(struct device *hwdev, size_t size, @@ -85,7 +104,8 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size, static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr, size_t size, enum dma_data_direction direction) { - return iommu_map_single(devnode_table(hwdev), vaddr, size, direction); + return iommu_map_single(devnode_table(hwdev), vaddr, size, + device_to_mask(hwdev), direction); } @@ -100,7 +120,7 @@ static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist, int nelems, enum dma_data_direction direction) { return iommu_map_sg(pdev, devnode_table(pdev), sglist, - nelems, direction); + nelems, device_to_mask(pdev), direction); } static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, @@ -112,7 +132,19 @@ static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, /* We support DMA to/from any memory page via the iommu */ static int pci_iommu_dma_supported(struct device *dev, u64 mask) { - return 1; + struct iommu_table *tbl = devnode_table(dev); + + if (!tbl || tbl->it_offset > mask) { + printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n"); + if (tbl) + printk(KERN_INFO "mask: 0x%08lx, table offset: 0x%08lx\n", + mask, tbl->it_offset); + else + printk(KERN_INFO "mask: 0x%08lx, table unavailable\n", + mask); + return 0; + } else + return 1; } void pci_iommu_init(void) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index dfa5398ab3c8..4b052ae5dc34 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -81,6 +81,7 @@ EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strcasecmp); +EXPORT_SYMBOL(strncasecmp); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 4336390bcf34..9a07f97f0712 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -62,7 +62,7 @@ static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; #ifdef CONFIG_PPC64 -static int __initdata iommu_is_off; +int __initdata iommu_is_off; int __initdata iommu_force_on; unsigned long tce_alloc_start, tce_alloc_end; #endif @@ -885,6 +885,74 @@ void __init unflatten_device_tree(void) DBG(" <- unflatten_device_tree()\n"); } +/* + * ibm,pa-features is a per-cpu property that contains a string of + * attribute descriptors, each of which has a 2 byte header plus up + * to 254 bytes worth of processor attribute bits. First header + * byte specifies the number of bytes following the header. + * Second header byte is an "attribute-specifier" type, of which + * zero is the only currently-defined value. + * Implementation: Pass in the byte and bit offset for the feature + * that we are interested in. The function will return -1 if the + * pa-features property is missing, or a 1/0 to indicate if the feature + * is supported/not supported. Note that the bit numbers are + * big-endian to match the definition in PAPR. + */ +static struct ibm_pa_feature { + unsigned long cpu_features; /* CPU_FTR_xxx bit */ + unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned char pabyte; /* byte number in ibm,pa-features */ + unsigned char pabit; /* bit number (big-endian) */ + unsigned char invert; /* if 1, pa bit set => clear feature */ +} ibm_pa_features[] __initdata = { + {0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, + {0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, + {CPU_FTR_SLB, 0, 0, 2, 0}, + {CPU_FTR_CTRL, 0, 0, 3, 0}, + {CPU_FTR_NOEXECUTE, 0, 0, 6, 0}, + {CPU_FTR_NODSISRALIGN, 0, 1, 1, 1}, + {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, +}; + +static void __init check_cpu_pa_features(unsigned long node) +{ + unsigned char *pa_ftrs; + unsigned long len, tablelen, i, bit; + + pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + if (pa_ftrs == NULL) + return; + + /* find descriptor with type == 0 */ + for (;;) { + if (tablelen < 3) + return; + len = 2 + pa_ftrs[0]; + if (tablelen < len) + return; /* descriptor 0 not found */ + if (pa_ftrs[1] == 0) + break; + tablelen -= len; + pa_ftrs += len; + } + + /* loop over bits we know about */ + for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) { + struct ibm_pa_feature *fp = &ibm_pa_features[i]; + + if (fp->pabyte >= pa_ftrs[0]) + continue; + bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; + if (bit ^ fp->invert) { + cur_cpu_spec->cpu_features |= fp->cpu_features; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + } else { + cur_cpu_spec->cpu_features &= ~fp->cpu_features; + cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + } + } +} + static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) @@ -969,6 +1037,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node, } #endif /* CONFIG_ALTIVEC */ + check_cpu_pa_features(node); + #ifdef CONFIG_PPC_PSERIES if (nthreads > 1) cur_cpu_spec->cpu_features |= CPU_FTR_SMT; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index d66c5e77fcff..41e9ab40cd54 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void) #ifdef CONFIG_PPC_PSERIES /* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. + * There are two methods for telling firmware what our capabilities are. + * Newer machines have an "ibm,client-architecture-support" method on the + * root node. For older machines, we have to call the "process-elf-header" + * method in the /packages/elf-loader node, passing it a fake 32-bit + * ELF header containing a couple of PT_NOTE sections that contain + * structures that contain various information. */ + +/* + * New method - extensible architecture description vector. + * + * Because the description vector contains a mix of byte and word + * values, we declare it as an unsigned char array, and use this + * macro to put word values in. + */ +#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ + ((x) >> 8) & 0xff, (x) & 0xff + +/* Option vector bits - generic bits in byte 1 */ +#define OV_IGNORE 0x80 /* ignore this vector */ +#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ + +/* Option vector 1: processor architectures supported */ +#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ +#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ +#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ +#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ +#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ +#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ + +/* Option vector 2: Open Firmware options supported */ +#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ + +/* Option vector 3: processor options supported */ +#define OV3_FP 0x80 /* floating point */ +#define OV3_VMX 0x40 /* VMX/Altivec */ + +/* Option vector 5: PAPR/OF options supported */ +#define OV5_LPAR 0x80 /* logical partitioning supported */ +#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */ +/* ibm,dynamic-reconfiguration-memory property supported */ +#define OV5_DRCONF_MEMORY 0x20 +#define OV5_LARGE_PAGES 0x10 /* large pages supported */ + +/* + * The architecture vector has an array of PVR mask/value pairs, + * followed by # option vectors - 1, followed by the option vectors. + */ +static unsigned char ibm_architecture_vec[] = { + W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ + W(0xffff0000), W(0x003e0000), /* POWER6 */ + W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ + 5 - 1, /* 5 option vectors */ + + /* option vector 1: processor architectures supported */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | + OV1_PPC_2_04 | OV1_PPC_2_05, + + /* option vector 2: Open Firmware options supported */ + 34 - 1, /* length */ + OV2_REAL_MODE, + 0, 0, + W(0xffffffff), /* real_base */ + W(0xffffffff), /* real_size */ + W(0xffffffff), /* virt_base */ + W(0xffffffff), /* virt_size */ + W(0xffffffff), /* load_base */ + W(64), /* 128MB min RMA */ + W(0xffffffff), /* full client load */ + 0, /* min RMA percentage of total RAM */ + 48, /* max log_2(hash table size) */ + + /* option vector 3: processor options supported */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV3_FP | OV3_VMX, + + /* option vector 4: IBM PAPR implementation */ + 2 - 1, /* length */ + 0, /* don't halt */ + + /* option vector 5: PAPR/OF options */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES, +}; + +/* Old method - ELF header with PT_NOTE sections */ static struct fake_elf { Elf32_Ehdr elfhdr; Elf32_Phdr phdr[2]; @@ -728,8 +814,26 @@ static struct fake_elf { static void __init prom_send_capabilities(void) { - ihandle elfloader; + ihandle elfloader, root; + prom_arg_t ret; + + root = call_prom("open", 1, 1, ADDR("/")); + if (root != 0) { + /* try calling the ibm,client-architecture-support method */ + if (call_prom_ret("call-method", 3, 2, &ret, + ADDR("ibm,client-architecture-support"), + ADDR(ibm_architecture_vec)) == 0) { + /* the call exists... */ + if (ret) + prom_printf("WARNING: ibm,client-architecture" + "-support call FAILED!\n"); + call_prom("close", 1, 0, root); + return; + } + call_prom("close", 1, 0, root); + } + /* no ibm,client-architecture-support call, try the old way */ elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); @@ -1528,12 +1632,11 @@ static int __init prom_find_machine_type(void) * non-IBM designs ! * - it has /rtas */ - len = prom_getprop(_prom->root, "model", + len = prom_getprop(_prom->root, "device_type", compat, sizeof(compat)-1); if (len <= 0) return PLATFORM_GENERIC; - compat[len] = 0; - if (strcmp(compat, "chrp")) + if (strcmp(compat, RELOC("chrp"))) return PLATFORM_GENERIC; /* Default to pSeries. We need to know if we are running LPAR */ @@ -1954,10 +2057,45 @@ static void __init flatten_device_tree(void) } - -static void __init fixup_device_tree(void) +#ifdef CONFIG_PPC_MAPLE +/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property. + * The values are bad, and it doesn't even have the right number of cells. */ +static void __init fixup_device_tree_maple(void) { + phandle isa; + u32 isa_ranges[6]; + + isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4")); + if (!PHANDLE_VALID(isa)) + return; + + if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges)) + == PROM_ERROR) + return; + + if (isa_ranges[0] != 0x1 || + isa_ranges[1] != 0xf4000000 || + isa_ranges[2] != 0x00010000) + return; + + prom_printf("fixing up bogus ISA range on Maple...\n"); + + isa_ranges[0] = 0x1; + isa_ranges[1] = 0x0; + isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */ + isa_ranges[3] = 0x0; + isa_ranges[4] = 0x0; + isa_ranges[5] = 0x00010000; + prom_setprop(isa, "/ht@0/isa@4", "ranges", + isa_ranges, sizeof(isa_ranges)); +} +#else +#define fixup_device_tree_maple() +#endif + #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC) +static void __init fixup_device_tree_pmac(void) +{ phandle u3, i2c, mpic; u32 u3_rev; u32 interrupts[2]; @@ -1994,9 +2132,16 @@ static void __init fixup_device_tree(void) parent = (u32)mpic; prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent", &parent, sizeof(parent)); -#endif } +#else +#define fixup_device_tree_pmac() +#endif +static void __init fixup_device_tree(void) +{ + fixup_device_tree_maple(); + fixup_device_tree_pmac(); +} static void __init prom_find_boot_cpu(void) { diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index bcb83574335b..4a677d1bd4ef 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -538,7 +538,7 @@ void do_syscall_trace_enter(struct pt_regs *regs) do_syscall_trace(); if (unlikely(current->audit_context)) - audit_syscall_entry(current, + audit_syscall_entry( #ifdef CONFIG_PPC32 AUDIT_ARCH_PPC, #else @@ -556,8 +556,7 @@ void do_syscall_trace_leave(struct pt_regs *regs) #endif if (unlikely(current->audit_context)) - audit_syscall_exit(current, - (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 456286cf1d14..9c9ad1fa9cce 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -258,11 +258,11 @@ static int __init proc_rtas_init(void) struct proc_dir_entry *entry; if (!machine_is(pseries)) - return 1; + return -ENODEV; rtas_node = of_find_node_by_name(NULL, "rtas"); if (rtas_node == NULL) - return 1; + return -ENODEV; entry = create_proc_entry("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL); if (entry) diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1d93e73a7003..684ab1d49c65 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -516,3 +516,11 @@ void probe_machine(void) printk(KERN_INFO "Using %s machine description\n", ppc_md.name); } + +int check_legacy_ioport(unsigned long base_port) +{ + if (ppc_md.check_legacy_ioport == NULL) + return 0; + return ppc_md.check_legacy_ioport(base_port); +} +EXPORT_SYMBOL(check_legacy_ioport); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 13e91c4d70a8..4467c49903b6 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -int check_legacy_ioport(unsigned long base_port) -{ - if (ppc_md.check_legacy_ioport == NULL) - return 0; - return ppc_md.check_legacy_ioport(base_port); -} -EXPORT_SYMBOL(check_legacy_ioport); - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 73560ef6f802..5bc2585c8036 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -279,7 +279,7 @@ static void unregister_cpu_online(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit sysfs_cpu_notify(struct notifier_block *self, +static int sysfs_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; @@ -297,7 +297,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata sysfs_cpu_nb = { +static struct notifier_block sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; @@ -322,13 +322,31 @@ static void register_nodes(void) } } } + +int sysfs_add_device_to_node(struct sys_device *dev, int nid) +{ + struct node *node = &node_devices[nid]; + return sysfs_create_link(&node->sysdev.kobj, &dev->kobj, + kobject_name(&dev->kobj)); +} + +void sysfs_remove_device_from_node(struct sys_device *dev, int nid) +{ + struct node *node = &node_devices[nid]; + sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj)); +} + #else static void register_nodes(void) { return; } + #endif +EXPORT_SYMBOL_GPL(sysfs_add_device_to_node); +EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node); + /* Only valid if CPU is present. */ static ssize_t show_physical_id(struct sys_device *dev, char *buf) { diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 1424eab450ee..26ed1f5ef16e 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -323,3 +323,25 @@ COMPAT_SYS(pselect6) COMPAT_SYS(ppoll) SYSCALL(unshare) SYSCALL(splice) +SYSCALL(tee) +SYSCALL(vmsplice) +COMPAT_SYS(openat) +SYSCALL(mkdirat) +SYSCALL(mknodat) +SYSCALL(fchownat) +COMPAT_SYS(futimesat) +SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64) +SYSCALL(unlinkat) +SYSCALL(renameat) +SYSCALL(linkat) +SYSCALL(symlinkat) +SYSCALL(readlinkat) +SYSCALL(fchmodat) +SYSCALL(faccessat) +COMPAT_SYS(get_robust_list) +COMPAT_SYS(set_robust_list) + +/* + * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c + * as well when appropriate. + */ diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 13c655ba2841..971020cf3f7d 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -202,7 +202,7 @@ static dma_addr_t vio_map_single(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { return iommu_map_single(to_vio_dev(dev)->iommu_table, vaddr, size, - direction); + ~0ul, direction); } static void vio_unmap_single(struct device *dev, dma_addr_t dma_handle, @@ -216,7 +216,7 @@ static int vio_map_sg(struct device *dev, struct scatterlist *sglist, int nelems, enum dma_data_direction direction) { return iommu_map_sg(dev, to_vio_dev(dev)->iommu_table, sglist, - nelems, direction); + nelems, ~0ul, direction); } static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist, @@ -229,7 +229,7 @@ static void *vio_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size, - dma_handle, flag); + dma_handle, ~0ul, flag); } static void vio_free_coherent(struct device *dev, size_t size, diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 7370f9f33e29..266b8b2ceac9 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -30,13 +30,66 @@ #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) +#ifdef CONFIG_PPC_64K_PAGES +#define HUGEPTE_INDEX_SIZE (PMD_SHIFT-HPAGE_SHIFT) +#else +#define HUGEPTE_INDEX_SIZE (PUD_SHIFT-HPAGE_SHIFT) +#endif +#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE) +#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << HUGEPTE_INDEX_SIZE) + +#define HUGEPD_SHIFT (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE) +#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT) +#define HUGEPD_MASK (~(HUGEPD_SIZE-1)) + +#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM]) + +/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() + * will choke on pointers to hugepte tables, which is handy for + * catching screwups early. */ +#define HUGEPD_OK 0x1 + +typedef struct { unsigned long pd; } hugepd_t; + +#define hugepd_none(hpd) ((hpd).pd == 0) + +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + BUG_ON(!(hpd.pd & HUGEPD_OK)); + return (pte_t *)(hpd.pd & ~HUGEPD_OK); +} + +static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr) +{ + unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1)); + pte_t *dir = hugepd_page(*hpdp); + + return dir + idx; +} + +static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, + unsigned long address) +{ + pte_t *new = kmem_cache_alloc(huge_pgtable_cache, + GFP_KERNEL|__GFP_REPEAT); + + if (! new) + return -ENOMEM; + + spin_lock(&mm->page_table_lock); + if (!hugepd_none(*hpdp)) + kmem_cache_free(huge_pgtable_cache, new); + else + hpdp->pd = (unsigned long)new | HUGEPD_OK; + spin_unlock(&mm->page_table_lock); + return 0; +} + /* Modelled after find_linux_pte() */ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pg; pud_t *pu; - pmd_t *pm; - pte_t *pt; BUG_ON(! in_hugepage_area(mm->context, addr)); @@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) if (!pgd_none(*pg)) { pu = pud_offset(pg, addr); if (!pud_none(*pu)) { - pm = pmd_offset(pu, addr); #ifdef CONFIG_PPC_64K_PAGES - /* Currently, we use the normal PTE offset within full - * size PTE pages, thus our huge PTEs are scattered in - * the PTE page and we do waste some. We may change - * that in the future, but the current mecanism keeps - * things much simpler - */ - if (!pmd_none(*pm)) { - /* Note: pte_offset_* are all equivalent on - * ppc64 as we don't have HIGHMEM - */ - pt = pte_offset_kernel(pm, addr); - return pt; - } -#else /* CONFIG_PPC_64K_PAGES */ - /* On 4k pages, we put huge PTEs in the PMD page */ - pt = (pte_t *)pm; - return pt; -#endif /* CONFIG_PPC_64K_PAGES */ + pmd_t *pm; + pm = pmd_offset(pu, addr); + if (!pmd_none(*pm)) + return hugepte_offset((hugepd_t *)pm, addr); +#else + return hugepte_offset((hugepd_t *)pu, addr); +#endif } } @@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pg; pud_t *pu; - pmd_t *pm; - pte_t *pt; + hugepd_t *hpdp = NULL; BUG_ON(! in_hugepage_area(mm->context, addr)); @@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) pu = pud_alloc(mm, pg, addr); if (pu) { +#ifdef CONFIG_PPC_64K_PAGES + pmd_t *pm; pm = pmd_alloc(mm, pu, addr); - if (pm) { + if (pm) + hpdp = (hugepd_t *)pm; +#else + hpdp = (hugepd_t *)pu; +#endif + } + + if (! hpdp) + return NULL; + + if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr)) + return NULL; + + return hugepte_offset(hpdp, addr); +} + +static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) +{ + pte_t *hugepte = hugepd_page(*hpdp); + + hpdp->pd = 0; + tlb->need_flush = 1; + pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, + HUGEPTE_TABLE_SIZE-1)); +} + #ifdef CONFIG_PPC_64K_PAGES - /* See comment in huge_pte_offset. Note that if we ever - * want to put the page size in the PMD, we would have - * to open code our own pte_alloc* function in order - * to populate and set the size atomically - */ - pt = pte_alloc_map(mm, pm, addr); -#else /* CONFIG_PPC_64K_PAGES */ - pt = (pte_t *)pm; -#endif /* CONFIG_PPC_64K_PAGES */ - return pt; - } +static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pmd_t *pmd; + unsigned long next; + unsigned long start; + + start = addr; + pmd = pmd_offset(pud, addr); + do { + next = pmd_addr_end(addr, end); + if (pmd_none(*pmd)) + continue; + free_hugepte_range(tlb, (hugepd_t *)pmd); + } while (pmd++, addr = next, addr != end); + + start &= PUD_MASK; + if (start < floor) + return; + if (ceiling) { + ceiling &= PUD_MASK; + if (!ceiling) + return; } + if (end - 1 > ceiling - 1) + return; - return NULL; + pmd = pmd_offset(pud, start); + pud_clear(pud); + pmd_free_tlb(tlb, pmd); +} +#endif + +static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pud_t *pud; + unsigned long next; + unsigned long start; + + start = addr; + pud = pud_offset(pgd, addr); + do { + next = pud_addr_end(addr, end); +#ifdef CONFIG_PPC_64K_PAGES + if (pud_none_or_clear_bad(pud)) + continue; + hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); +#else + if (pud_none(*pud)) + continue; + free_hugepte_range(tlb, (hugepd_t *)pud); +#endif + } while (pud++, addr = next, addr != end); + + start &= PGDIR_MASK; + if (start < floor) + return; + if (ceiling) { + ceiling &= PGDIR_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + return; + + pud = pud_offset(pgd, start); + pgd_clear(pgd); + pud_free_tlb(tlb, pud); +} + +/* + * This function frees user-level page tables of a process. + * + * Must be called with pagetable lock held. + */ +void hugetlb_free_pgd_range(struct mmu_gather **tlb, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pgd_t *pgd; + unsigned long next; + unsigned long start; + + /* + * Comments below take from the normal free_pgd_range(). They + * apply here too. The tests against HUGEPD_MASK below are + * essential, because we *don't* test for this at the bottom + * level. Without them we'll attempt to free a hugepte table + * when we unmap just part of it, even if there are other + * active mappings using it. + * + * The next few lines have given us lots of grief... + * + * Why are we testing HUGEPD* at this top level? Because + * often there will be no work to do at all, and we'd prefer + * not to go all the way down to the bottom just to discover + * that. + * + * Why all these "- 1"s? Because 0 represents both the bottom + * of the address space and the top of it (using -1 for the + * top wouldn't help much: the masks would do the wrong thing). + * The rule is that addr 0 and floor 0 refer to the bottom of + * the address space, but end 0 and ceiling 0 refer to the top + * Comparisons need to use "end - 1" and "ceiling - 1" (though + * that end 0 case should be mythical). + * + * Wherever addr is brought up or ceiling brought down, we + * must be careful to reject "the opposite 0" before it + * confuses the subsequent tests. But what about where end is + * brought down by HUGEPD_SIZE below? no, end can't go down to + * 0 there. + * + * Whereas we round start (addr) and ceiling down, by different + * masks at different levels, in order to test whether a table + * now has no other vmas using it, so can be freed, we don't + * bother to round floor or end up - the tests don't need that. + */ + + addr &= HUGEPD_MASK; + if (addr < floor) { + addr += HUGEPD_SIZE; + if (!addr) + return; + } + if (ceiling) { + ceiling &= HUGEPD_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + end -= HUGEPD_SIZE; + if (addr > end - 1) + return; + + start = addr; + pgd = pgd_offset((*tlb)->mm, addr); + do { + BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr)); + next = pgd_addr_end(addr, end); + if (pgd_none_or_clear_bad(pgd)) + continue; + hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling); + } while (pgd++, addr = next, addr != end); } void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, @@ -841,3 +1040,27 @@ repeat: out: return err; } + +static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) +{ + memset(addr, 0, kmem_cache_size(cache)); +} + +static int __init hugetlbpage_init(void) +{ + if (!cpu_has_feature(CPU_FTR_16M_PAGE)) + return -ENODEV; + + huge_pgtable_cache = kmem_cache_create("hugepte_cache", + HUGEPTE_TABLE_SIZE, + HUGEPTE_TABLE_SIZE, + SLAB_HWCACHE_ALIGN | + SLAB_MUST_HWCACHE_ALIGN, + zero_ctor, NULL); + if (! huge_pgtable_cache) + panic("hugetlbpage_init(): could not create hugepte cache\n"); + + return 0; +} + +module_init(hugetlbpage_init); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index babebd15bdc4..9e30f968c184 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { }; #endif /* CONFIG_PPC_64K_PAGES */ +#ifdef CONFIG_HUGETLB_PAGE +/* Hugepages need one extra cache, initialized in hugetlbpage.c. We + * can't put into the tables above, because HPAGE_SHIFT is not compile + * time constant. */ +kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1]; +#else kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; +#endif void pgtable_cache_init(void) { diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 0a335f34974c..092355f37399 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -194,7 +194,7 @@ static int *of_get_associativity(struct device_node *dev) /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa * info is found. */ -static int of_node_to_nid(struct device_node *device) +static int of_node_to_nid_single(struct device_node *device) { int nid = -1; unsigned int *tmp; @@ -216,6 +216,28 @@ out: return nid; } +/* Walk the device tree upwards, looking for an associativity id */ +int of_node_to_nid(struct device_node *device) +{ + struct device_node *tmp; + int nid = -1; + + of_node_get(device); + while (device) { + nid = of_node_to_nid_single(device); + if (nid != -1) + break; + + tmp = device; + device = of_get_parent(tmp); + of_node_put(tmp); + } + of_node_put(device); + + return nid; +} +EXPORT_SYMBOL_GPL(of_node_to_nid); + /* * In theory, the "ibm,associativity" property may contain multiple * associativity lists because a resource may be multiply connected @@ -300,7 +322,7 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu) goto out; } - nid = of_node_to_nid(cpu); + nid = of_node_to_nid_single(cpu); if (nid < 0 || !node_online(nid)) nid = any_online_node(NODE_MASK_ALL); @@ -393,7 +415,7 @@ static int __init parse_numa_properties(void) cpu = find_cpu_node(i); BUG_ON(!cpu); - nid = of_node_to_nid(cpu); + nid = of_node_to_nid_single(cpu); of_node_put(cpu); /* @@ -437,7 +459,7 @@ new_range: * have associativity properties. If none, then * everything goes to default_nid. */ - nid = of_node_to_nid(memory); + nid = of_node_to_nid_single(memory); if (nid < 0) nid = default_nid; node_set_online(nid); @@ -776,7 +798,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr) ha_new_range: start = read_n_cells(n_mem_addr_cells, &memcell_buf); size = read_n_cells(n_mem_size_cells, &memcell_buf); - nid = of_node_to_nid(memory); + nid = of_node_to_nid_single(memory); /* Domains not present at boot default to 0 */ if (nid < 0 || !node_online(nid)) diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index c2a3db8edb0c..6a02d51086c8 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -12,7 +12,8 @@ config SPU_FS config SPUFS_MMAP bool - depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES + depends on SPU_FS && SPARSEMEM + select MEMORY_HOTPLUG default y endmenu diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index dac5d0365fde..6574b22b3cf3 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -29,6 +29,8 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/console.h> +#include <linux/mutex.h> +#include <linux/memory_hotplug.h> #include <asm/mmu.h> #include <asm/processor.h> @@ -46,6 +48,7 @@ #include <asm/cputable.h> #include <asm/ppc-pci.h> #include <asm/irq.h> +#include <asm/spu.h> #include "interrupt.h" #include "iommu.h" @@ -69,77 +72,6 @@ static void cell_show_cpuinfo(struct seq_file *m) of_node_put(root); } -#ifdef CONFIG_SPARSEMEM -static int __init find_spu_node_id(struct device_node *spe) -{ - unsigned int *id; -#ifdef CONFIG_NUMA - struct device_node *cpu; - cpu = spe->parent->parent; - id = (unsigned int *)get_property(cpu, "node-id", NULL); -#else - id = NULL; -#endif - return id ? *id : 0; -} - -static void __init cell_spuprop_present(struct device_node *spe, - const char *prop, int early) -{ - struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, end_pfn, pfn; - int node_id; - - p = (void*)get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - node_id = find_spu_node_id(spe); - - start_pfn = p->address >> PAGE_SHIFT; - end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - /* We need to call memory_present *before* the call to sparse_init, - but we can initialize the page structs only *after* that call. - Thus, we're being called twice. */ - if (early) - memory_present(node_id, start_pfn, end_pfn); - else { - /* As the pages backing SPU LS and I/O are outside the range - of regular memory, their page structs were not initialized - by free_area_init. Do it here instead. */ - for (pfn = start_pfn; pfn < end_pfn; pfn++) { - struct page *page = pfn_to_page(pfn); - set_page_links(page, ZONE_DMA, node_id, pfn); - init_page_count(page); - reset_page_mapcount(page); - SetPageReserved(page); - INIT_LIST_HEAD(&page->lru); - } - } -} - -static void __init cell_spumem_init(int early) -{ - struct device_node *node; - for (node = of_find_node_by_type(NULL, "spe"); - node; node = of_find_node_by_type(node, "spe")) { - cell_spuprop_present(node, "local-store", early); - cell_spuprop_present(node, "problem", early); - cell_spuprop_present(node, "priv1", early); - cell_spuprop_present(node, "priv2", early); - } -} -#else -static void __init cell_spumem_init(int early) -{ -} -#endif - static void cell_progress(char *s, unsigned short hex) { printk("*** %04x : %s\n", hex, s ? s : ""); @@ -172,8 +104,6 @@ static void __init cell_setup_arch(void) #endif mmio_nvram_init(); - - cell_spumem_init(0); } /* @@ -189,8 +119,6 @@ static void __init cell_init_early(void) ppc64_interrupt_controller = IC_CELL_PIC; - cell_spumem_init(1); - DBG(" <- cell_init_early()\n"); } diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 269dda4fd0b4..ad141fe8d52d 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu) snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); ret = request_irq(irq_base + spu->isrc, - spu_irq_class_0, 0, spu->irq_c0, spu); + spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu); if (ret) goto out; snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_1, 0, spu->irq_c1, spu); + spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu); if (ret) goto out1; snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_2, 0, spu->irq_c2, spu); + spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu); if (ret) goto out2; goto out; @@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu) ea = spu->dar; dsisr = spu->dsisr; if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) { + u64 flags; + access = (_PAGE_PRESENT | _PAGE_USER); access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; + local_irq_save(flags); if (hash_page(ea, access, 0x300) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; + local_irq_restore(flags); } if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) { if ((ret = spu_handle_mm_fault(spu)) != 0) @@ -516,8 +520,50 @@ void spu_irq_setaffinity(struct spu *spu, int cpu) } EXPORT_SYMBOL_GPL(spu_irq_setaffinity); -static void __iomem * __init map_spe_prop(struct device_node *n, - const char *name) +static int __init find_spu_node_id(struct device_node *spe) +{ + unsigned int *id; + struct device_node *cpu; + cpu = spe->parent->parent; + id = (unsigned int *)get_property(cpu, "node-id", NULL); + return id ? *id : 0; +} + +static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, + const char *prop) +{ + static DEFINE_MUTEX(add_spumem_mutex); + + struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *p; + int proplen; + + unsigned long start_pfn, nr_pages; + struct pglist_data *pgdata; + struct zone *zone; + int ret; + + p = (void*)get_property(spe, prop, &proplen); + WARN_ON(proplen != sizeof (*p)); + + start_pfn = p->address >> PAGE_SHIFT; + nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pgdata = NODE_DATA(spu->nid); + zone = pgdata->node_zones; + + /* XXX rethink locking here */ + mutex_lock(&add_spumem_mutex); + ret = __add_pages(zone, start_pfn, nr_pages); + mutex_unlock(&add_spumem_mutex); + + return ret; +} + +static void __iomem * __init map_spe_prop(struct spu *spu, + struct device_node *n, const char *name) { struct address_prop { unsigned long address; @@ -526,6 +572,8 @@ static void __iomem * __init map_spe_prop(struct device_node *n, void *p; int proplen; + void* ret = NULL; + int err = 0; p = get_property(n, name, &proplen); if (proplen != sizeof (struct address_prop)) @@ -533,7 +581,14 @@ static void __iomem * __init map_spe_prop(struct device_node *n, prop = p; - return ioremap(prop->address, prop->len); + err = cell_spuprop_present(spu, n, name); + if (err && (err != -EEXIST)) + goto out; + + ret = ioremap(prop->address, prop->len); + + out: + return ret; } static void spu_unmap(struct spu *spu) @@ -544,44 +599,45 @@ static void spu_unmap(struct spu *spu) iounmap((u8 __iomem *)spu->local_store); } -static int __init spu_map_device(struct spu *spu, struct device_node *spe) +static int __init spu_map_device(struct spu *spu, struct device_node *node) { char *prop; int ret; ret = -ENODEV; - prop = get_property(spe, "isrc", NULL); + prop = get_property(node, "isrc", NULL); if (!prop) goto out; spu->isrc = *(unsigned int *)prop; - spu->name = get_property(spe, "name", NULL); + spu->name = get_property(node, "name", NULL); if (!spu->name) goto out; - prop = get_property(spe, "local-store", NULL); + prop = get_property(node, "local-store", NULL); if (!prop) goto out; spu->local_store_phys = *(unsigned long *)prop; /* we use local store as ram, not io memory */ - spu->local_store = (void __force *)map_spe_prop(spe, "local-store"); + spu->local_store = (void __force *) + map_spe_prop(spu, node, "local-store"); if (!spu->local_store) goto out; - prop = get_property(spe, "problem", NULL); + prop = get_property(node, "problem", NULL); if (!prop) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; - spu->problem= map_spe_prop(spe, "problem"); + spu->problem= map_spe_prop(spu, node, "problem"); if (!spu->problem) goto out_unmap; - spu->priv1= map_spe_prop(spe, "priv1"); + spu->priv1= map_spe_prop(spu, node, "priv1"); /* priv1 is not available on a hypervisor */ - spu->priv2= map_spe_prop(spe, "priv2"); + spu->priv2= map_spe_prop(spu, node, "priv2"); if (!spu->priv2) goto out_unmap; ret = 0; @@ -593,17 +649,6 @@ out: return ret; } -static int __init find_spu_node_id(struct device_node *spe) -{ - unsigned int *id; - struct device_node *cpu; - - cpu = spe->parent->parent; - id = (unsigned int *)get_property(cpu, "node-id", NULL); - - return id ? *id : 0; -} - static int __init create_spu(struct device_node *spe) { struct spu *spu; @@ -620,6 +665,10 @@ static int __init create_spu(struct device_node *spe) goto out_free; spu->node = find_spu_node_id(spe); + spu->nid = of_node_to_nid(spe); + if (spu->nid == -1) + spu->nid = 0; + spu->stop_code = 0; spu->slb_replace = 0; spu->mm = NULL; diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index 6594bec73882..b47fcc5ddb78 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -258,6 +258,7 @@ void *spu_syscall_table[] = { [__NR_futex] sys_futex, [__NR_sched_setaffinity] sys_sched_setaffinity, [__NR_sched_getaffinity] sys_sched_getaffinity, + [224] sys_ni_syscall, [__NR_tuxcall] sys_ni_syscall, [226] sys_ni_syscall, [__NR_io_setup] sys_io_setup, @@ -317,21 +318,36 @@ void *spu_syscall_table[] = { [__NR_ppoll] sys_ni_syscall, /* sys_ppoll */ [__NR_unshare] sys_unshare, [__NR_splice] sys_splice, + [__NR_tee] sys_tee, + [__NR_vmsplice] sys_vmsplice, + [__NR_openat] sys_openat, + [__NR_mkdirat] sys_mkdirat, + [__NR_mknodat] sys_mknodat, + [__NR_fchownat] sys_fchownat, + [__NR_futimesat] sys_futimesat, + [__NR_newfstatat] sys_newfstatat, + [__NR_unlinkat] sys_unlinkat, + [__NR_renameat] sys_renameat, + [__NR_linkat] sys_linkat, + [__NR_symlinkat] sys_symlinkat, + [__NR_readlinkat] sys_readlinkat, + [__NR_fchmodat] sys_fchmodat, + [__NR_faccessat] sys_faccessat, + [__NR_get_robust_list] sys_get_robust_list, + [__NR_set_robust_list] sys_set_robust_list, }; long spu_sys_callback(struct spu_syscall_block *s) { long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6); - BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls); - - syscall = spu_syscall_table[s->nr_ret]; - - if (s->nr_ret >= __NR_syscalls) { + if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) { pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret); return -ENOSYS; } + syscall = spu_syscall_table[s->nr_ret]; + #ifdef DEBUG print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall); printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n", diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 97898d5d34e5..1726bfe38ee0 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -1297,7 +1297,7 @@ static inline void setup_decr(struct spu_state *csa, struct spu *spu) cycles_t resume_time = get_cycles(); cycles_t delta_time = resume_time - csa->suspend_time; - csa->lscsa->decr.slot[0] = delta_time; + csa->lscsa->decr.slot[0] -= delta_time; } } diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h index 63f0aee4c158..996c28744e96 100644 --- a/arch/powerpc/platforms/chrp/chrp.h +++ b/arch/powerpc/platforms/chrp/chrp.h @@ -9,3 +9,4 @@ extern long chrp_time_init(void); extern void chrp_find_bridges(void); extern void chrp_event_scan(unsigned long); +extern void chrp_pcibios_fixup(void); diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 8ef279ad36ad..ac224876ce59 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -23,6 +23,8 @@ #include <asm/grackle.h> #include <asm/rtas.h> +#include "chrp.h" + /* LongTrail */ void __iomem *gg2_pci_config_base; @@ -314,6 +316,6 @@ chrp_find_bridges(void) } /* Do not fixup interrupts from OF tree on pegasos */ - if (is_pegasos == 0) - ppc_md.pcibios_fixup = chrp_pcibios_fixup; + if (is_pegasos) + ppc_md.pcibios_fixup = NULL; } diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 23a201718704..18d89f38796b 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -440,8 +440,6 @@ void __init chrp_init_IRQ(void) if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; - else - ppc_md.get_irq = mpic_get_irq; #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) /* see if there is a keyboard in the device tree @@ -528,26 +526,24 @@ static int __init chrp_probe(void) /* Assume we have an 8259... */ __irq_offset_value = NUM_ISA_INTERRUPTS; - ppc_md.setup_arch = chrp_setup_arch; - ppc_md.show_cpuinfo = chrp_show_cpuinfo; - - ppc_md.init_IRQ = chrp_init_IRQ; - ppc_md.init = chrp_init2; - - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = rtas_restart; - ppc_md.power_off = rtas_power_off; - ppc_md.halt = rtas_halt; - - ppc_md.time_init = chrp_time_init; - ppc_md.calibrate_decr = generic_calibrate_decr; - - /* this may get overridden with rtas routines later... */ - ppc_md.set_rtc_time = chrp_set_rtc_time; - ppc_md.get_rtc_time = chrp_get_rtc_time; - -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ + return 1; } + +define_machine(chrp) { + .name = "CHRP", + .probe = chrp_probe, + .setup_arch = chrp_setup_arch, + .init = chrp_init2, + .show_cpuinfo = chrp_show_cpuinfo, + .init_IRQ = chrp_init_IRQ, + .get_irq = mpic_get_irq, + .pcibios_fixup = chrp_pcibios_fixup, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .time_init = chrp_time_init, + .set_rtc_time = chrp_set_rtc_time, + .get_rtc_time = chrp_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 6ce8a404ba6b..a6fd9bedb074 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -54,6 +54,7 @@ #include <asm/iseries/hv_lp_event.h> #include <asm/iseries/lpar_map.h> #include <asm/udbg.h> +#include <asm/irq.h> #include "naca.h" #include "setup.h" @@ -684,6 +685,12 @@ static int __init iseries_probe(void) powerpc_firmware_features |= FW_FEATURE_ISERIES; powerpc_firmware_features |= FW_FEATURE_LPAR; + /* + * The Hypervisor only allows us up to 256 interrupt + * sources (the irq number is passed in a u8). + */ + virt_irq_max = 255; + return 1; } diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index e14f9ac55cf4..c896ce83d412 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -231,6 +231,14 @@ static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host) return isr; } +static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result) +{ + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + host->state = state_stop; + host->result = result; +} + + static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) { u8 ack; @@ -246,42 +254,36 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) } if (isr == 0) { + printk(KERN_WARNING "low_i2c: Timeout in i2c transfer" + " on keywest !\n"); if (host->state != state_stop) { - DBG_LOW("KW: Timeout !\n"); - host->result = -EIO; - goto stop; - } - if (host->state == state_stop) { - ack = kw_read_reg(reg_status); - if (ack & KW_I2C_STAT_BUSY) - kw_write_reg(reg_status, 0); - host->state = state_idle; - kw_write_reg(reg_ier, 0x00); - if (!host->polled) - complete(&host->complete); + kw_i2c_do_stop(host, -EIO); + return; } + ack = kw_read_reg(reg_status); + if (ack & KW_I2C_STAT_BUSY) + kw_write_reg(reg_status, 0); + host->state = state_idle; + kw_write_reg(reg_ier, 0x00); + if (!host->polled) + complete(&host->complete); return; } if (isr & KW_I2C_IRQ_ADDR) { ack = kw_read_reg(reg_status); if (host->state != state_addr) { - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); WRONG_STATE("KW_I2C_IRQ_ADDR"); - host->result = -EIO; - goto stop; + kw_i2c_do_stop(host, -EIO); } if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - host->result = -ENODEV; - DBG_LOW("KW: NAK on address\n"); + host->result = -ENXIO; host->state = state_stop; - return; + DBG_LOW("KW: NAK on address\n"); } else { - if (host->len == 0) { - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); - goto stop; - } - if (host->rw) { + if (host->len == 0) + kw_i2c_do_stop(host, 0); + else if (host->rw) { host->state = state_read; if (host->len > 1) kw_write_reg(reg_control, @@ -308,25 +310,19 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) ack = kw_read_reg(reg_status); if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { DBG_LOW("KW: nack on data write\n"); - host->result = -EIO; - goto stop; + host->result = -EFBIG; + host->state = state_stop; } else if (host->len) { kw_write_reg(reg_data, *(host->data++)); host->len--; - } else { - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - host->state = state_stop; - host->result = 0; - } - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + } else + kw_i2c_do_stop(host, 0); } else { - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); WRONG_STATE("KW_I2C_IRQ_DATA"); - if (host->state != state_stop) { - host->result = -EIO; - goto stop; - } + if (host->state != state_stop) + kw_i2c_do_stop(host, -EIO); } + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); } if (isr & KW_I2C_IRQ_STOP) { @@ -340,14 +336,10 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) complete(&host->complete); } + /* Below should only happen in manual mode which we don't use ... */ if (isr & KW_I2C_IRQ_START) kw_write_reg(reg_isr, KW_I2C_IRQ_START); - return; - stop: - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - host->state = state_stop; - return; } /* Interrupt handler */ @@ -544,11 +536,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) return NULL; } - /* Make sure IRA is disabled */ + /* Make sure IRQ is disabled */ kw_write_reg(reg_ier, 0); /* Request chip interrupt */ - if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host)) + if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host)) host->irq = NO_IRQ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", @@ -1165,6 +1157,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_xfer); /* some quirks for platform function decoding */ enum { pmac_i2c_quirk_invmask = 0x00000001u, + pmac_i2c_quirk_skip = 0x00000002u, }; static void pmac_i2c_devscan(void (*callback)(struct device_node *dev, @@ -1180,6 +1173,15 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev, /* XXX Study device-tree's & apple drivers are get the quirks * right ! */ + /* Workaround: It seems that running the clockspreading + * properties on the eMac will cause lockups during boot. + * The machine seems to work fine without that. So for now, + * let's make sure i2c-hwclock doesn't match about "imic" + * clocks and we'll figure out if we really need to do + * something special about those later. + */ + { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip }, + { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip }, { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask }, { "i2c-cpu-voltage", NULL, 0}, { "temp-monitor", NULL, 0 }, @@ -1206,6 +1208,8 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev, if (p->compatible && !device_is_compatible(np, p->compatible)) continue; + if (p->quirks & pmac_i2c_quirk_skip) + break; callback(np, p->quirks); break; } diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index f5d8d15d74fa..ea179afea632 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1097,7 +1097,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) * (iBook second controller) */ if (dev->vendor == PCI_VENDOR_ID_APPLE - && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) + && dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node) { printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", pci_name(dev)); diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 4baa75b1d36f..f08173b0f065 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/module.h> +#include <linux/mutex.h> #include <asm/semaphore.h> #include <asm/prom.h> @@ -546,6 +547,7 @@ struct pmf_device { static LIST_HEAD(pmf_devices); static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_MUTEX(pmf_irq_mutex); static void pmf_release_device(struct kref *kref) { @@ -864,15 +866,17 @@ int pmf_register_irq_client(struct device_node *target, spin_lock_irqsave(&pmf_lock, flags); func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN); - if (func == NULL) { - spin_unlock_irqrestore(&pmf_lock, flags); + if (func) + func = pmf_get_function(func); + spin_unlock_irqrestore(&pmf_lock, flags); + if (func == NULL) return -ENODEV; - } + mutex_lock(&pmf_irq_mutex); if (list_empty(&func->irq_clients)) func->dev->handlers->irq_enable(func); list_add(&client->link, &func->irq_clients); client->func = func; - spin_unlock_irqrestore(&pmf_lock, flags); + mutex_unlock(&pmf_irq_mutex); return 0; } @@ -881,16 +885,16 @@ EXPORT_SYMBOL_GPL(pmf_register_irq_client); void pmf_unregister_irq_client(struct pmf_irq_client *client) { struct pmf_function *func = client->func; - unsigned long flags; BUG_ON(func == NULL); - spin_lock_irqsave(&pmf_lock, flags); + mutex_lock(&pmf_irq_mutex); client->func = NULL; list_del(&client->link); if (list_empty(&func->irq_clients)) func->dev->handlers->irq_disable(func); - spin_unlock_irqrestore(&pmf_lock, flags); + mutex_unlock(&pmf_irq_mutex); + pmf_put_function(func); } EXPORT_SYMBOL_GPL(pmf_unregister_irq_client); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 4d15e396655c..b9200fb07815 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -463,11 +463,23 @@ static int pmac_pm_finish(suspend_state_t state) return 0; } +static int pmac_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_DISK: + return 1; + /* can't do any other states via generic mechanism yet */ + default: + return 0; + } +} + static struct pm_ops pmac_pm_ops = { .pm_disk_mode = PM_DISK_SHUTDOWN, .prepare = pmac_pm_prepare, .enter = pmac_pm_enter, .finish = pmac_pm_finish, + .valid = pmac_pm_valid, }; #endif /* CONFIG_SOFTWARE_SUSPEND */ diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 780fb27a0099..32eaddfa5470 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -957,8 +957,10 @@ static void eeh_remove_device(struct pci_dev *dev) pci_addr_cache_remove_device(dev); dn = pci_device_to_OF_node(dev); - PCI_DN(dn)->pcidev = NULL; - pci_dev_put (dev); + if (PCI_DN(dn)->pcidev) { + PCI_DN(dn)->pcidev = NULL; + pci_dev_put (dev); + } } void eeh_remove_bus_device(struct pci_dev *dev) diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index a1bda6f96fd1..40020c65c89e 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -118,7 +118,15 @@ int eeh_send_failure_event (struct device_node *dn, { unsigned long flags; struct eeh_event *event; + char *location; + if (!mem_init_done) { + printk(KERN_ERR "EEH: event during early boot not handled\n"); + location = (char *) get_property(dn, "ibm,loc-code", NULL); + printk(KERN_ERR "EEH: device node = %s\n", dn->full_name); + printk(KERN_ERR "EEH: PCI location = %s\n", location); + return 1; + } event = kmalloc(sizeof(*event), GFP_ATOMIC); if (event == NULL) { printk (KERN_ERR "EEH: out of memory, event not handled\n"); diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index fcc4d561a236..e0000ce769e5 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -488,7 +488,7 @@ static int __init rtas_init(void) /* No RTAS */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { printk(KERN_INFO "rtasd: no event-scan on system\n"); - return 1; + return -ENODEV; } entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 5eb55ef1c91c..5f79f01c44f2 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -255,7 +255,7 @@ static int __init pSeries_init_panel(void) { /* Manually leave the kernel version on the panel. */ ppc_md.progress("Linux ppc64\n", 0); - ppc_md.progress(system_utsname.version, 0); + ppc_md.progress(system_utsname.release, 0); return 0; } diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 61d317428610..38087bd6e3cf 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -49,6 +49,7 @@ #include "dart.h" +extern int iommu_is_off; extern int iommu_force_on; /* Physical base address and size of the DART table */ @@ -329,10 +330,17 @@ void iommu_init_early_dart(void) void __init alloc_dart_table(void) { - /* Only reserve DART space if machine has more than 2GB of RAM + /* Only reserve DART space if machine has more than 1GB of RAM * or if requested with iommu=on on cmdline. + * + * 1GB of RAM is picked as limit because some default devices + * (i.e. Airport Extreme) have 30 bit address range limits. */ - if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on) + + if (iommu_is_off) + return; + + if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull) return; /* 512 pages (2MB) is max DART tablesize. */ diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index 77e4dc780f8c..2f5c5e157617 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -134,6 +134,7 @@ main(void) DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags)); DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 5891ecbdc703..1adc9145516f 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -128,29 +128,26 @@ transfer_to_handler: stw r12,4(r11) #endif b 3f + 2: /* if from kernel, check interrupted DOZE/NAP mode and * check for stack overflow */ + lwz r9,THREAD_INFO-THREAD(r12) + cmplw r1,r9 /* if r1 <= current->thread_info */ + ble- stack_ovf /* then the kernel stack overflowed */ +5: #ifdef CONFIG_6xx - mfspr r11,SPRN_HID0 - mtcr r11 -BEGIN_FTR_SECTION - bt- 8,4f /* Check DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - bt- 9,4f /* Check NAP */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) + tophys(r9,r9) /* check local flags */ + lwz r12,TI_LOCAL_FLAGS(r9) + mtcrf 0x01,r12 + bt- 31-TLF_NAPPING,4f #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont transfer_to_handler_cont: - lwz r11,THREAD_INFO-THREAD(r12) - cmplw r1,r11 /* if r1 <= current->thread_info */ - ble- stack_ovf /* then the kernel stack overflowed */ 3: mflr r9 lwz r11,0(r9) /* virtual address of handler */ lwz r9,4(r9) /* where to go when done */ - FIX_SRR1(r10,r12) mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r10 mtlr r9 @@ -158,7 +155,9 @@ transfer_to_handler_cont: RFI /* jump to handler, enable MMU */ #ifdef CONFIG_6xx -4: b power_save_6xx_restore +4: rlwinm r12,r12,0,~_TLF_NAPPING + stw r12,TI_LOCAL_FLAGS(r9) + b power_save_6xx_restore #endif /* @@ -167,10 +166,10 @@ transfer_to_handler_cont: */ stack_ovf: /* sometimes we use a statically-allocated stack, which is OK. */ - lis r11,_end@h - ori r11,r11,_end@l - cmplw r1,r11 - ble 3b /* r1 <= &_end is OK */ + lis r12,_end@h + ori r12,r12,_end@l + cmplw r1,r12 + ble 5b /* r1 <= &_end is OK */ SAVE_NVGPRS(r11) addi r3,r1,STACK_FRAME_OVERHEAD lis r1,init_thread_union@ha diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index ec53c7d65f2b..7a2f20583be4 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -355,9 +355,7 @@ InstructionTLBMiss: . = 0x1200 DataStoreTLBMiss: -#ifdef CONFIG_8xx_CPU6 stw r3, 8(r0) -#endif DO_8xx_CPU6(0x3f80, r3) mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ mfcr r10 @@ -417,9 +415,7 @@ DataStoreTLBMiss: lwz r11, 0(r0) mtcr r11 lwz r11, 4(r0) -#ifdef CONFIG_8xx_CPU6 lwz r3, 8(r0) -#endif rfi /* This is an instruction TLB error on the MPC8xx. This could be due diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 865ba74991a9..b250b1b539b6 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -94,6 +94,7 @@ EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strcasecmp); +EXPORT_SYMBOL(strncasecmp); EXPORT_SYMBOL(__div64_32); EXPORT_SYMBOL(csum_partial); diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index f841972f1fa9..554776d4b8ac 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -331,7 +331,7 @@ static void __init ocotea_init(void) void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { - ibm44x_platform_init(r3, r4, r5, r6, r7); + ibm440gx_platform_init(r3, r4, r5, r6, r7); ppc_md.setup_arch = ocotea_setup_arch; ppc_md.show_cpuinfo = ocotea_show_cpuinfo; diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index bc9b94f77e39..abb7154de2c7 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -26,11 +26,35 @@ #include <asm/irq.h> #include <asm/ppc_sys.h> #include <asm/ppcboot.h> +#include <linux/fs_uart_pd.h> #include "pq2ads_pd.h" static void init_fcc1_ioports(void); static void init_fcc2_ioports(void); +static void init_scc1_uart_ioports(void); +static void init_scc4_uart_ioports(void); + +static struct fs_uart_platform_info mpc8272_uart_pdata[] = { + [fsid_scc1_uart] = { + .init_ioports = init_scc1_uart_ioports, + .fs_no = fsid_scc1_uart, + .brg = 1, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, + [fsid_scc4_uart] = { + .init_ioports = init_scc4_uart_ioports, + .fs_no = fsid_scc4_uart, + .brg = 4, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, +}; static struct fs_mii_bus_info mii_bus_info = { .method = fsmii_bitbang, @@ -201,12 +225,65 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, } } +static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, + int idx) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + int num = ARRAY_SIZE(mpc8272_uart_pdata); + int id = fs_uart_id_scc2fsid(idx); + + /* no need to alter anything if console */ + if ((id <= num) && (!pdev->dev.platform_data)) { + pinfo = &mpc8272_uart_pdata[id]; + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + } +} + +static void init_scc1_uart_ioports(void) +{ + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + + /* SCC1 is only on port D */ + setbits32(&immap->im_ioport.iop_ppard,0x00000003); + clrbits32(&immap->im_ioport.iop_psord,0x00000001); + setbits32(&immap->im_ioport.iop_psord,0x00000002); + clrbits32(&immap->im_ioport.iop_pdird,0x00000001); + setbits32(&immap->im_ioport.iop_pdird,0x00000002); + + /* Wire BRG1 to SCC1 */ + clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff); + + iounmap(immap); +} + +static void init_scc4_uart_ioports(void) +{ + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + + setbits32(&immap->im_ioport.iop_ppard,0x00000600); + clrbits32(&immap->im_ioport.iop_psord,0x00000600); + clrbits32(&immap->im_ioport.iop_pdird,0x00000200); + setbits32(&immap->im_ioport.iop_pdird,0x00000400); + + /* Wire BRG4 to SCC4 */ + clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff); + setbits32(&immap->im_cpmux.cmx_scr,0x0000001b); + + iounmap(immap); +} + static int mpc8272ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { { .bus_id = "fsl-cpm-fcc", - .rtn = mpc8272ads_fixup_enet_pdata + .rtn = mpc8272ads_fixup_enet_pdata, + }, + { + .bus_id = "fsl-cpm-scc:uart", + .rtn = mpc8272ads_fixup_uart_pdata, }, { .bus_id = NULL @@ -230,7 +307,44 @@ int __init mpc8272ads_init(void) ppc_sys_device_enable(MPC82xx_CPM_FCC1); ppc_sys_device_enable(MPC82xx_CPM_FCC2); + /* to be ready for console, let's attach pdata here */ +#ifdef CONFIG_SERIAL_CPM_SCC1 + ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART); + ppc_sys_device_enable(MPC82xx_CPM_SCC1); + +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART); + ppc_sys_device_enable(MPC82xx_CPM_SCC4); +#endif + + return 0; } +/* + To prevent confusion, console selection is gross: + by 0 assumed SCC1 and by 1 assumed SCC4 + */ +struct platform_device* early_uart_get_pdev(int index) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + + struct platform_device* pdev = NULL; + if(index) { /*assume SCC4 here*/ + pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4]; + pinfo = &mpc8272_uart_pdata[fsid_scc4_uart]; + } else { /*over SCC1*/ + pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1]; + pinfo = &mpc8272_uart_pdata[fsid_scc1_uart]; + } + + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR); + return NULL; +} + arch_initcall(mpc8272ads_init); diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index ac8fcc68afeb..d919dab61347 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> #include <linux/mii.h> #include <asm/delay.h> @@ -37,6 +38,11 @@ extern unsigned char __res[]; +static void setup_fec1_ioports(void); +static void setup_scc1_ioports(void); +static void setup_smc1_ioports(void); +static void setup_smc2_ioports(void); + static struct fs_mii_bus_info fec_mii_bus_info = { .method = fsmii_fec, .id = 0, @@ -79,6 +85,28 @@ static struct fs_platform_info mpc8xx_scc_pdata = { .phy_irq = -1, .bus_info = &scc_mii_bus_info, + +}; + +static struct fs_uart_platform_info mpc866_uart_pdata[] = { + [fsid_smc1_uart] = { + .brg = 1, + .fs_no = fsid_smc1_uart, + .init_ioports = setup_smc1_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, + [fsid_smc2_uart] = { + .brg = 2, + .fs_no = fsid_smc2_uart, + .init_ioports = setup_smc2_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, }; void __init board_init(void) @@ -92,9 +120,12 @@ void __init board_init(void) printk(KERN_CRIT "Could not remap BCSR1\n"); return; } + #ifdef CONFIG_SERIAL_CPM_SMC1 cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ clrbits32(bcsr_io,(0x80000000 >> 7)); + cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else setbits32(bcsr_io,(0x80000000 >> 7)); @@ -108,6 +139,8 @@ void __init board_init(void) cp->cp_simode &= ~(0xe0000000 >> 1); cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ clrbits32(bcsr_io,(0x80000000 >> 13)); + cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else clrbits32(bcsr_io,(0x80000000 >> 13)); cp->cp_pbpar &= ~(0x00000c00); @@ -232,6 +265,74 @@ static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } +static void setup_smc1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x000000c0; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + + clrbits32(bcsr_io,BCSR1_RS232EN_1); + iounmap(bcsr_io); + + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); + +} + +static void setup_smc2_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x00000c00; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + + clrbits32(bcsr_io,BCSR1_RS232EN_2); + + iounmap(bcsr_io); + +#ifndef CONFIG_SERIAL_CPM_ALT_SMC2 + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); +#else + setbits16(&immap->im_ioport.iop_papar, iobits); + clrbits16(&immap->im_ioport.iop_padir, iobits); + clrbits16(&immap->im_ioport.iop_paodr, iobits); +#endif + +} + +static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, + int idx) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + int num = ARRAY_SIZE(mpc866_uart_pdata); + + int id = fs_uart_id_smc2fsid(idx); + + /* no need to alter anything if console */ + if ((id <= num) && (!pdev->dev.platform_data)) { + pinfo = &mpc866_uart_pdata[id]; + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + } +} + static int mpc866ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { @@ -244,6 +345,10 @@ static int mpc866ads_platform_notify(struct device *dev) .rtn = mpc866ads_fixup_scc_enet_pdata, }, { + .bus_id = "fsl-cpm-smc:uart", + .rtn = mpc866ads_fixup_uart_pdata + }, + { .bus_id = NULL } }; @@ -267,7 +372,42 @@ int __init mpc866ads_init(void) #endif ppc_sys_device_enable(MPC8xx_CPM_FEC1); +/* Since either of the uarts could be used as console, they need to ready */ +#ifdef CONFIG_SERIAL_CPM_SMC1 + ppc_sys_device_enable(MPC8xx_CPM_SMC1); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC + ppc_sys_device_enable(MPC8xx_CPM_SMC2); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); +#endif + return 0; } +/* + To prevent confusion, console selection is gross: + by 0 assumed SMC1 and by 1 assumed SMC2 + */ +struct platform_device* early_uart_get_pdev(int index) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + + struct platform_device* pdev = NULL; + if(index) { /*assume SMC2 here*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; + pinfo = &mpc866_uart_pdata[1]; + } else { /*over SMC1*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; + pinfo = &mpc866_uart_pdata[0]; + } + + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); + return NULL; +} + arch_initcall(mpc866ads_init); diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index 50a99e5f7c68..4b88679cd31c 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> #include <linux/mii.h> #include <asm/delay.h> @@ -35,9 +36,32 @@ #include <asm/ppc_sys.h> extern unsigned char __res[]; +static void setup_smc1_ioports(void); +static void setup_smc2_ioports(void); static void __init mpc885ads_scc_phy_init(char); +static struct fs_uart_platform_info mpc885_uart_pdata[] = { + [fsid_smc1_uart] = { + .brg = 1, + .fs_no = fsid_smc1_uart, + .init_ioports = setup_smc1_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, + [fsid_smc2_uart] = { + .brg = 2, + .fs_no = fsid_smc2_uart, + .init_ioports = setup_smc2_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, +}; + static struct fs_mii_bus_info fec_mii_bus_info = { .method = fsmii_fec, .id = 0, @@ -116,6 +140,8 @@ void __init board_init(void) #ifdef CONFIG_SERIAL_CPM_SMC1 cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ clrbits32(bcsr_io, BCSR1_RS232EN_1); + cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else setbits32(bcsr_io,BCSR1_RS232EN_1); cp->cp_smc[0].smc_smcmr = 0; @@ -126,6 +152,8 @@ void __init board_init(void) cp->cp_simode &= ~(0xe0000000 >> 1); cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ clrbits32(bcsr_io,BCSR1_RS232EN_2); + cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else setbits32(bcsr_io,BCSR1_RS232EN_2); cp->cp_smc[1].smc_smcmr = 0; @@ -343,6 +371,70 @@ static void mpc885ads_scc_phy_init(char phy_addr) out_be32(&fecp->fec_mii_speed, 0); } +static void setup_smc1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x000000c0; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_1); + iounmap(bcsr_io); + + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); +} + +static void setup_smc2_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x00000c00; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_2); + iounmap(bcsr_io); + +#ifndef CONFIG_SERIAL_CPM_ALT_SMC2 + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); +#else + setbits16(&immap->im_ioport.iop_papar, iobits); + clrbits16(&immap->im_ioport.iop_padir, iobits); + clrbits16(&immap->im_ioport.iop_paodr, iobits); +#endif +} + +static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev, + int idx) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + int num = ARRAY_SIZE(mpc885_uart_pdata); + + int id = fs_uart_id_smc2fsid(idx); + + /* no need to alter anything if console */ + if ((id <= num) && (!pdev->dev.platform_data)) { + pinfo = &mpc885_uart_pdata[id]; + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + } +} + + static int mpc885ads_platform_notify(struct device *dev) { @@ -356,12 +448,17 @@ static int mpc885ads_platform_notify(struct device *dev) .rtn = mpc885ads_fixup_scc_enet_pdata, }, { + .bus_id = "fsl-cpm-smc:uart", + .rtn = mpc885ads_fixup_uart_pdata + }, + { .bus_id = NULL } }; platform_notify_map(dev_map,dev); + return 0; } int __init mpc885ads_init(void) @@ -383,7 +480,41 @@ int __init mpc885ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_FEC2); #endif +#ifdef CONFIG_SERIAL_CPM_SMC1 + ppc_sys_device_enable(MPC8xx_CPM_SMC1); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + ppc_sys_device_enable(MPC8xx_CPM_SMC2); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); +#endif return 0; } arch_initcall(mpc885ads_init); + +/* + To prevent confusion, console selection is gross: + by 0 assumed SMC1 and by 1 assumed SMC2 + */ +struct platform_device* early_uart_get_pdev(int index) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + + struct platform_device* pdev = NULL; + if(index) { /*assume SMC2 here*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; + pinfo = &mpc885_uart_pdata[1]; + } else { /*over SMC1*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; + pinfo = &mpc885_uart_pdata[0]; + } + + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); + return NULL; +} + diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c index 3365fd788a7a..7fc2e02f5246 100644 --- a/arch/ppc/platforms/pq2ads.c +++ b/arch/ppc/platforms/pq2ads.c @@ -14,11 +14,40 @@ #include <linux/init.h> +#include <asm/io.h> #include <asm/mpc8260.h> +#include <asm/cpm2.h> +#include <asm/immap_cpm2.h> void __init m82xx_board_setup(void) { + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32)); + /* Enable the 2nd UART port */ - *(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_RS232_EN2; + clrbits32(bcsr, BCSR1_RS232_EN2); + +#ifdef CONFIG_SERIAL_CPM_SCC1 + clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + + iounmap(bcsr); + iounmap(immap); } diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index a7dd55f1c63e..f6cc16888527 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -2,7 +2,7 @@ * PPC440GX system library * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies + * Copyright (c) 2003 - 2006 Zultys Technologies * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -282,3 +282,14 @@ int ibm440gx_show_cpuinfo(struct seq_file *m){ return 0; } +void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, + unsigned long r7) +{ + /* Erratum 440_43 workaround, disable L1 cache parity checking */ + if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") || + !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F")) + mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC); + + ibm44x_platform_init(r3, r4, r5, r6, r7); +} diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h index a2ab9fab8e34..a03ec6022e8f 100644 --- a/arch/ppc/syslib/ibm440gx_common.h +++ b/arch/ppc/syslib/ibm440gx_common.h @@ -29,6 +29,10 @@ void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk, unsigned int ser_clk) __init; +/* common 440GX platform init */ +void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) __init; + /* Enable L2 cache */ void ibm440gx_l2c_enable(void) __init; diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index bd41ed83beb3..6f536383866e 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -170,12 +170,18 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC8xx_CPM_SMC1] = { .name = "fsl-cpm-smc", .id = 1, - .num_resources = 2, + .num_resources = 3, .resource = (struct resource[]) { { .name = "regs", - .start = 0xa82, - .end = 0xa91, + .start = 0xa80, + .end = 0xa8f, + .flags = IORESOURCE_MEM, + }, + { + .name = "pram", + .start = 0x3e80, + .end = 0x3ebf, .flags = IORESOURCE_MEM, }, { @@ -189,15 +195,22 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC8xx_CPM_SMC2] = { .name = "fsl-cpm-smc", .id = 2, - .num_resources = 2, + .num_resources = 3, .resource = (struct resource[]) { { .name = "regs", - .start = 0xa92, - .end = 0xaa1, + .start = 0xa90, + .end = 0xa9f, .flags = IORESOURCE_MEM, }, { + .name = "pram", + .start = 0x3f80, + .end = 0x3fbf, + .flags = IORESOURCE_MEM, + + }, + { .name = "interrupt", .start = MPC8xx_INT_SMC2, .end = MPC8xx_INT_SMC2, diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 60c724e11584..2d48018b71d9 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -109,9 +109,11 @@ ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr) int i; for (i = 0; i < pdev->num_resources; i++) { struct resource *r = &pdev->resource[i]; - if ((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) { + if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && + ((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) { r->start += paddr; r->end += paddr; + r->flags |= PPC_SYS_IORESOURCE_FIXUPPED; } } } @@ -156,12 +158,13 @@ void platform_notify_map(const struct platform_notify_dev_map *map, while (map->bus_id != NULL) { idx = -1; s = strrchr(dev->bus_id, '.'); - if (s != NULL) + if (s != NULL) { idx = (int)simple_strtol(s + 1, NULL, 10); - else + len = s - dev->bus_id; + } else { s = dev->bus_id; - - len = s - dev->bus_id; + len = strlen(dev->bus_id); + } if (!strncmp(dev->bus_id, map->bus_id, len)) { pdev = container_of(dev, struct platform_device, dev); diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index 0636aed7b827..8692d00c08c4 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -121,13 +121,13 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 3, .resource = (struct resource[]) { { - .name = "scc_mem", + .name = "regs", .start = 0x11A00, .end = 0x11A1F, .flags = IORESOURCE_MEM, }, { - .name = "scc_pram", + .name = "pram", .start = 0x8000, .end = 0x80ff, .flags = IORESOURCE_MEM, @@ -145,13 +145,13 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 3, .resource = (struct resource[]) { { - .name = "scc_mem", + .name = "regs", .start = 0x11A20, .end = 0x11A3F, .flags = IORESOURCE_MEM, }, { - .name = "scc_pram", + .name = "pram", .start = 0x8100, .end = 0x81ff, .flags = IORESOURCE_MEM, @@ -169,13 +169,13 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 3, .resource = (struct resource[]) { { - .name = "scc_mem", + .name = "regs", .start = 0x11A40, .end = 0x11A5F, .flags = IORESOURCE_MEM, }, { - .name = "scc_pram", + .name = "pram", .start = 0x8200, .end = 0x82ff, .flags = IORESOURCE_MEM, @@ -193,13 +193,13 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 3, .resource = (struct resource[]) { { - .name = "scc_mem", + .name = "regs", .start = 0x11A60, .end = 0x11A7F, .flags = IORESOURCE_MEM, }, { - .name = "scc_pram", + .name = "pram", .start = 0x8300, .end = 0x83ff, .flags = IORESOURCE_MEM, diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index 75e64f1c144d..fee8948162b9 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -113,13 +113,13 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8248", .mask = 0x0000ff00, .value = 0x00000c00, - .num_devices = 11, + .num_devices = 12, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, - MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, - MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1, }, }, { @@ -139,13 +139,13 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8272", .mask = 0x0000ff00, .value = 0x00000c00, - .num_devices = 11, + .num_devices = 12, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, - MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, - MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1, }, }, /* below is a list of the 8280 family of processors */ diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 54d35c130907..9a22434a580c 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -652,7 +652,7 @@ appldata_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata appldata_nb = { +static struct notifier_block appldata_nb = { .notifier_call = appldata_cpu_notify, }; diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 5291b5f8788d..b4c815d8ef75 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -430,7 +430,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) /* This is the X/Open sanctioned signal stack switching. */ if (ka->sa.sa_flags & SA_ONSTACK) { - if (! on_sig_stack(sp)) + if (! sas_ss_flags(sp)) sp = current->sas_ss_sp + current->sas_ss_size; } diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 199da68bd7be..4d53b2739357 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1608,3 +1608,53 @@ compat_sys_ppoll_wrapper: sys_unshare_wrapper: llgfr %r2,%r2 # unsigned long jg sys_unshare + + .globl compat_sys_set_robust_list_wrapper +compat_sys_set_robust_list_wrapper: + llgtr %r2,%r2 # struct compat_robust_list_head * + llgfr %r3,%r3 # size_t + jg compat_sys_set_robust_list + + .globl compat_sys_get_robust_list_wrapper +compat_sys_get_robust_list_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # compat_uptr_t_t * + llgtr %r4,%r4 # compat_size_t * + jg compat_sys_get_robust_list + + .globl sys_splice_wrapper +sys_splice_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # loff_t * + lgfr %r4,%r4 # int + llgtr %r5,%r5 # loff_t * + llgfr %r6,%r6 # size_t + llgf %r0,164(%r15) # unsigned int + stg %r0,160(%r15) + jg sys_splice + + .globl sys_sync_file_range_wrapper +sys_sync_file_range_wrapper: + lgfr %r2,%r2 # int + sllg %r3,%r3,32 # get high word of 64bit loff_t + or %r3,%r4 # get low word of 64bit loff_t + sllg %r4,%r5,32 # get high word of 64bit loff_t + or %r4,%r6 # get low word of 64bit loff_t + llgf %r5,164(%r15) # unsigned int + jg sys_sync_file_range + + .globl sys_tee_wrapper +sys_tee_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + llgfr %r4,%r4 # size_t + llgfr %r5,%r5 # unsigned int + jg sys_tee + + .globl compat_sys_vmsplice_wrapper +compat_sys_vmsplice_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned int + llgfr %r5,%r5 # unsigned int + jg compat_sys_vmsplice diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 37dfe33dab73..8f36504075ed 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -734,7 +734,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) { if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(current, AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]); + audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]); if (!test_thread_flag(TIF_SYSCALL_TRACE)) goto out; @@ -761,8 +761,7 @@ syscall_trace(struct pt_regs *regs, int entryexit) } out: if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(current, - test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X, + audit_syscall_entry(test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X, regs->gprs[2], regs->orig_gpr2, regs->gprs[3], regs->gprs[4], regs->gprs[5]); } diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index ae1927e48cfb..d48cfc726b68 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -358,8 +358,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, } else { regs->gprs[14] = (unsigned long) frame->retcode | PSW_ADDR_AMODE; - err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, - (u16 __user *)(frame->retcode)); + if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, + (u16 __user *)(frame->retcode))) + goto give_sigsegv; } /* Set up backchain. */ diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 2f56654da821..93be1d56c036 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -312,3 +312,9 @@ SYSCALL(sys_faccessat,sys_faccessat,sys_faccessat_wrapper) /* 300 */ SYSCALL(sys_pselect6,sys_pselect6,compat_sys_pselect6_wrapper) SYSCALL(sys_ppoll,sys_ppoll,compat_sys_ppoll_wrapper) SYSCALL(sys_unshare,sys_unshare,sys_unshare_wrapper) +SYSCALL(sys_set_robust_list,sys_set_robust_list,compat_sys_set_robust_list_wrapper) +SYSCALL(sys_get_robust_list,sys_get_robust_list,compat_sys_get_robust_list_wrapper) +SYSCALL(sys_splice,sys_splice,sys_splice_wrapper) +SYSCALL(sys_sync_file_range,sys_sync_file_range,sys_sync_file_range_wrapper) +SYSCALL(sys_tee,sys_tee,sys_tee_wrapper) +SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index fea043b69b91..2a6c6efb6865 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -249,18 +249,19 @@ static inline void stop_hz_timer(void) unsigned long flags; unsigned long seq, next; __u64 timer, todval; + int cpu = smp_processor_id(); if (sysctl_hz_timer != 0) return; - cpu_set(smp_processor_id(), nohz_cpu_mask); + cpu_set(cpu, nohz_cpu_mask); /* * Leave the clock comparator set up for the next timer * tick if either rcu or a softirq is pending. */ - if (rcu_pending(smp_processor_id()) || local_softirq_pending()) { - cpu_clear(smp_processor_id(), nohz_cpu_mask); + if (rcu_needs_cpu(cpu) || local_softirq_pending()) { + cpu_clear(cpu, nohz_cpu_mask); return; } @@ -271,7 +272,7 @@ static inline void stop_hz_timer(void) next = next_timer_interrupt(); do { seq = read_seqbegin_irqsave(&xtime_lock, flags); - timer = (__u64)(next - jiffies) + jiffies_64; + timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); todval = -1ULL; /* Be careful about overflows. */ diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 9289face3027..9f34bb54c051 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -58,9 +58,11 @@ SECTIONS . = ALIGN(4096); .data.page_aligned : { *(.data.idt) } - . = ALIGN(32); + . = ALIGN(256); .data.cacheline_aligned : { *(.data.cacheline_aligned) } + . = ALIGN(256); + .data.read_mostly : { *(.data.read_mostly) } _edata = .; /* End of data section */ . = ALIGN(8192); /* init_task */ diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index a9566bcab682..9b11e3e20903 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -192,6 +192,7 @@ query_segment_type (struct dcss_segment *seg) diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc); if (diag_cc > 1) { + PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc); rc = dcss_diag_translate_rc (vmrc); goto out_free; } @@ -553,7 +554,7 @@ segment_save(char *name) int endpfn = 0; char cmd1[160]; char cmd2[80]; - int i; + int i, response; if (!MACHINE_IS_VM) return; @@ -576,8 +577,20 @@ segment_save(char *name) segtype_string[seg->range[i].start & 0xff]); } sprintf(cmd2, "SAVESEG %s", name); - cpcmd(cmd1, NULL, 0, NULL); - cpcmd(cmd2, NULL, 0, NULL); + response = 0; + cpcmd(cmd1, NULL, 0, &response); + if (response) { + PRINT_ERR("segment_save: DEFSEG failed with response code %i\n", + response); + goto out; + } + cpcmd(cmd2, NULL, 0, &response); + if (response) { + PRINT_ERR("segment_save: SAVESEG failed with response code %i\n", + response); + goto out; + } +out: spin_unlock(&dcss_lock); } diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index 460f72e640e6..f9ff29734848 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -274,6 +274,11 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0) goto err_noiommu; + /* Set the resource name, if known. */ + if (sdev) { + res->name = sdev->prom_name; + } + return (void *)res->start; err_noiommu: diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index 787d5f1347ec..598682f31ebf 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -113,6 +113,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SPARC_32: + case R_SPARC_UA32: location[0] = v >> 24; location[1] = v >> 16; location[2] = v >> 8; diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index ec1c9687d679..4b376fae752c 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -251,19 +251,9 @@ EXPORT_SYMBOL(__prom_getchild); EXPORT_SYMBOL(__prom_getsibling); /* sparc library symbols */ -EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strncmp); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(page_kernel); /* Special internal versions of library functions. */ @@ -317,6 +307,3 @@ EXPORT_SYMBOL(do_BUG); /* Sun Power Management Idle Handler */ EXPORT_SYMBOL(pm_idle); - -/* Binfmt_misc needs this */ -EXPORT_SYMBOL(sys_close); diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S index fbbec5e761c6..2856551bddf1 100644 --- a/arch/sparc/kernel/systbls.S +++ b/arch/sparc/kernel/systbls.S @@ -23,7 +23,7 @@ sys_call_table: /*10*/ .long sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys_mknod /*15*/ .long sys_chmod, sys_lchown16, sparc_brk, sys_nis_syscall, sys_lseek /*20*/ .long sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 -/*25*/ .long sys_time, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause +/*25*/ .long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause /*30*/ .long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice /*35*/ .long sys_chown, sys_sync, sys_kill, sys_newstat, sys_sendfile /*40*/ .long sys_newlstat, sys_dup, sys_pipe, sys_times, sys_getuid @@ -75,10 +75,11 @@ sys_call_table: /*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy /*270*/ .long sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink /*275*/ .long sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid -/*280*/ .long sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat +/*280*/ .long sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat /*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64 /*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat /*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare +/*300*/ .long sys_set_robust_list, sys_get_robust_list #ifdef CONFIG_SUNOS_EMUL /* Now the SunOS syscall table. */ @@ -190,6 +191,6 @@ sunos_sys_table: /*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys .long sunos_nosys, sunos_nosys, sunos_nosys .long sunos_nosys, sunos_nosys, sunos_nosys - .long sunos_nosys + .long sunos_nosys, sunos_nosys, sunos_nosys #endif diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 648047a0bce3..43a66f5407f4 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -187,7 +187,7 @@ config HUGETLB_PAGE_SIZE_512K bool "512K" config HUGETLB_PAGE_SIZE_64K - depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64K + depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB bool "64K" endchoice diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 1317380fa937..f09a70b8aabd 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Sun Apr 2 19:31:04 2006 +# Linux kernel version: 2.6.17-rc3 +# Fri May 12 12:43:49 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -114,6 +114,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_LARGE_ALLOCS=y @@ -430,7 +431,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGICPTI is not set # CONFIG_SCSI_QLA_FC is not set @@ -1042,9 +1042,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1115,6 +1113,14 @@ CONFIG_USB_HIDDEV=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -1303,6 +1309,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 3eadac5e171e..31c5892f5acc 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -10,6 +10,7 @@ #include <linux/config.h> #include <linux/version.h> #include <linux/errno.h> +#include <linux/threads.h> #include <asm/thread_info.h> #include <asm/asi.h> #include <asm/pstate.h> @@ -493,6 +494,35 @@ tlb_fixup_done: call prom_init mov %l7, %o0 ! OpenPROM cif handler + /* Initialize current_thread_info()->cpu as early as possible. + * In order to do that accurately we have to patch up the get_cpuid() + * assembler sequences. And that, in turn, requires that we know + * if we are on a Starfire box or not. While we're here, patch up + * the sun4v sequences as well. + */ + call check_if_starfire + nop + call per_cpu_patch + nop + call sun4v_patch + nop + +#ifdef CONFIG_SMP + call hard_smp_processor_id + nop + cmp %o0, NR_CPUS + blu,pt %xcc, 1f + nop + call boot_cpu_id_too_large + nop + /* Not reached... */ + +1: +#else + mov 0, %o0 +#endif + stb %o0, [%g6 + TI_CPU] + /* Off we go.... */ call start_kernel nop diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index ffc7309e9f22..2e1c824c1cc9 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -63,7 +63,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) flushi(p->addr); } -static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); kcb->prev_kprobe.status = kcb->kprobe_status; @@ -71,7 +71,7 @@ static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil; } -static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; kcb->kprobe_status = kcb->prev_kprobe.status; @@ -79,7 +79,7 @@ static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, +static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = p; @@ -87,7 +87,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { regs->tstate |= TSTATE_PIL; @@ -273,7 +273,7 @@ static void __kprobes resume_execution(struct kprobe *p, kcb->kprobe_orig_tstate_pil); } -static inline int post_kprobe_handler(struct pt_regs *regs) +static int __kprobes post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); @@ -300,7 +300,7 @@ out: return 1; } -static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c index 6c83e372f75d..579871527699 100644 --- a/arch/sparc64/kernel/module.c +++ b/arch/sparc64/kernel/module.c @@ -143,6 +143,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, location[3] = v >> 0; break; + case R_SPARC_DISP32: + v -= (Elf64_Addr) location; + *loc32 = v; + break; + case R_SPARC_WDISP30: v -= (Elf64_Addr) location; *loc32 = (*loc32 & ~0x3fffffff) | diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index dfccff29e182..f97ddeb105ac 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -419,6 +419,7 @@ void pcibios_resource_to_bus(struct pci_dev *pdev, struct pci_bus_region *region region->start = res->start - zero_res.start; region->end = res->end - zero_res.start; } +EXPORT_SYMBOL(pcibios_resource_to_bus); void pcibios_bus_to_resource(struct pci_dev *pdev, struct resource *res, struct pci_bus_region *region) diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 8efbc139769d..82e5455134c6 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -218,7 +218,7 @@ static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx) * DMA for PCI device PDEV. Return non-NULL cpu-side address if * successful and set *DMA_ADDRP to the PCI side dma address. */ -static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) +static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -232,7 +232,7 @@ static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr if (order >= 10) return NULL; - first_page = __get_free_pages(GFP_ATOMIC, order); + first_page = __get_free_pages(gfp, order); if (first_page == 0UL) return NULL; memset((char *)first_page, 0, PAGE_SIZE << order); diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 9e94db2573a2..2b7a1f316a93 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -154,7 +154,7 @@ static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, un __clear_bit(i, arena->map); } -static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) +static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -169,7 +169,7 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr npages = size >> IO_PAGE_SHIFT; - first_page = __get_free_pages(GFP_ATOMIC, order); + first_page = __get_free_pages(gfp, order); if (unlikely(first_page == 0UL)) return NULL; diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index 49e6dedd027d..d31975e6d6f6 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -653,7 +653,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p) if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) result = AUDITSC_FAILURE; - audit_syscall_exit(current, result, regs->u_regs[UREG_I0]); + audit_syscall_exit(result, regs->u_regs[UREG_I0]); } if (!(current->ptrace & PT_PTRACED)) @@ -677,8 +677,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p) out: if (unlikely(current->audit_context) && !syscall_exit_p) - audit_syscall_entry(current, - (test_thread_flag(TIF_32BIT) ? + audit_syscall_entry((test_thread_flag(TIF_32BIT) ? AUDIT_ARCH_SPARC : AUDIT_ARCH_SPARC64), regs->u_regs[UREG_G1], diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 005167f82419..9cf1c88cd774 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -220,7 +220,7 @@ char reboot_command[COMMAND_LINE_SIZE]; static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 }; -static void __init per_cpu_patch(void) +void __init per_cpu_patch(void) { struct cpuid_patch_entry *p; unsigned long ver; @@ -280,7 +280,7 @@ static void __init per_cpu_patch(void) } } -static void __init sun4v_patch(void) +void __init sun4v_patch(void) { struct sun4v_1insn_patch_entry *p1; struct sun4v_2insn_patch_entry *p2; @@ -315,6 +315,15 @@ static void __init sun4v_patch(void) } } +#ifdef CONFIG_SMP +void __init boot_cpu_id_too_large(int cpu) +{ + prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n", + cpu, NR_CPUS); + prom_halt(); +} +#endif + void __init setup_arch(char **cmdline_p) { /* Initialize PROM console and command line. */ @@ -332,16 +341,6 @@ void __init setup_arch(char **cmdline_p) conswitchp = &prom_con; #endif - /* Work out if we are starfire early on */ - check_if_starfire(); - - /* Now we know enough to patch the get_cpuid sequences - * used by trap code. - */ - per_cpu_patch(); - - sun4v_patch(); - boot_flags_init(*cmdline_p); idprom_init(); diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 90eaca3ec9a6..4e8cd79156e0 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1264,7 +1264,6 @@ void __init smp_tick_init(void) boot_cpu_id = hard_smp_processor_id(); current_tick_offset = timer_tick_offset; - cpu_set(boot_cpu_id, cpu_online_map); prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1; } @@ -1345,18 +1344,6 @@ void __init smp_setup_cpu_possible_map(void) void __devinit smp_prepare_boot_cpu(void) { - int cpu = hard_smp_processor_id(); - - if (cpu >= NR_CPUS) { - prom_printf("Serious problem, boot cpu id >= NR_CPUS\n"); - prom_halt(); - } - - current_thread_info()->cpu = cpu; - __local_per_cpu_offset = __per_cpu_offset(cpu); - - cpu_set(smp_processor_id(), cpu_online_map); - cpu_set(smp_processor_id(), phys_cpu_present_map); } int __devinit __cpu_up(unsigned int cpu) @@ -1433,4 +1420,7 @@ void __init setup_per_cpu_areas(void) for (i = 0; i < NR_CPUS; i++, ptr += size) memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); + + /* Setup %g5 for the boot cpu. */ + __local_per_cpu_offset = __per_cpu_offset(smp_processor_id()); } diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S index 86dd5cb81e09..bdf1f4d02e3f 100644 --- a/arch/sparc64/kernel/sys32.S +++ b/arch/sparc64/kernel/sys32.S @@ -138,6 +138,8 @@ SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1) SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2) SIGN2(sys32_splice, sys_splice, %o0, %o1) SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5) +SIGN2(sys32_tee, sys_tee, %o0, %o1) +SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0) .globl sys32_mmap2 sys32_mmap2: diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index 857b82c82875..1136fc465e37 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -25,7 +25,7 @@ sys_call_table32: /*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod /*15*/ .word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16 -/*25*/ .word compat_sys_time, sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause +/*25*/ .word sys32_vmsplice, sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice .word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile /*40*/ .word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid @@ -76,10 +76,11 @@ sys_call_table32: .word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy /*270*/ .word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink .word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid -/*280*/ .word sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat +/*280*/ .word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat .word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64 -/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat +/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat .word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare +/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list #endif /* CONFIG_COMPAT */ @@ -94,7 +95,7 @@ sys_call_table: /*10*/ .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod /*15*/ .word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid -/*25*/ .word sys_nis_syscall, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall +/*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall /*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice .word sys_nis_syscall, sys_sync, sys_kill, sys_newstat, sys_sendfile64 /*40*/ .word sys_newlstat, sys_dup, sys_pipe, sys_times, sys_nis_syscall @@ -145,10 +146,11 @@ sys_call_table: .word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy /*270*/ .word sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink .word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid -/*280*/ .word sys_nis_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat +/*280*/ .word sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat .word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64 -/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat +/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat .word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare +/*300*/ .word sys_set_robust_list, sys_get_robust_list #if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \ defined(CONFIG_SOLARIS_EMUL_MODULE) @@ -261,5 +263,5 @@ sunos_sys_table: /*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys .word sunos_nosys, sunos_nosys, sunos_nosys .word sunos_nosys, sunos_nosys, sunos_nosys - .word sunos_nosys + .word sunos_nosys, sunos_nosys, sunos_nosys #endif diff --git a/arch/sparc64/lib/checksum.S b/arch/sparc64/lib/checksum.S index ba9cd3ccc2b2..1d230f693dc4 100644 --- a/arch/sparc64/lib/checksum.S +++ b/arch/sparc64/lib/checksum.S @@ -165,8 +165,9 @@ csum_partial_end_cruft: sll %g1, 8, %g1 or %o5, %g1, %o4 -1: add %o2, %o4, %o2 +1: addcc %o2, %o4, %o2 + addc %g0, %o2, %o2 csum_partial_finish: retl - mov %o2, %o0 + srl %o2, 0, %o0 diff --git a/arch/sparc64/lib/csum_copy.S b/arch/sparc64/lib/csum_copy.S index 71af48839064..e566c770a0f6 100644 --- a/arch/sparc64/lib/csum_copy.S +++ b/arch/sparc64/lib/csum_copy.S @@ -221,11 +221,12 @@ FUNC_NAME: /* %o0=src, %o1=dst, %o2=len, %o3=sum */ sll %g1, 8, %g1 or %o5, %g1, %o4 -1: add %o3, %o4, %o3 +1: addcc %o3, %o4, %o3 + addc %g0, %o3, %o3 70: retl - mov %o3, %o0 + srl %o3, 0, %o0 95: mov 0, GLOBAL_SPARE brlez,pn %o2, 4f diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c index a079cf42505e..3f10fc921b00 100644 --- a/arch/sparc64/mm/tlb.c +++ b/arch/sparc64/mm/tlb.c @@ -8,6 +8,7 @@ #include <linux/percpu.h> #include <linux/mm.h> #include <linux/swap.h> +#include <linux/preempt.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -24,6 +25,8 @@ void flush_tlb_pending(void) { struct mmu_gather *mp = &__get_cpu_var(mmu_gathers); + preempt_disable(); + if (mp->tlb_nr) { flush_tsb_user(mp); @@ -38,6 +41,8 @@ void flush_tlb_pending(void) } mp->tlb_nr = 0; } + + preempt_enable(); } void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig) diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 05fbb20636cb..76e85bbaea55 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -57,20 +57,6 @@ config STATIC_LINK chroot, and you disable CONFIG_MODE_TT, you probably want to say Y here. -config HOST_2G_2G - bool "2G/2G host address space split" - default n - depends on MODE_TT - help - This is needed when the host on which you run has a 2G/2G memory - split, instead of the customary 3G/1G. - - Note that to enable such a host - configuration, which makes sense only in some cases, you need special - host patches. - - So, if you do not know what to do here, say 'N'. - config KERNEL_HALF_GIGS int "Kernel address space size (in .5G units)" default "1" diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index 85e6a55b3b59..f6eb72d117b9 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -16,6 +16,19 @@ config SEMAPHORE_SLEEPERS bool default y +config HOST_2G_2G + bool "2G/2G host address space split" + default n + help + This is needed when the host on which you run has a 2G/2G memory + split, instead of the customary 3G/1G. + + Note that to enable such a host + configuration, which makes sense only in some cases, you need special + host patches. + + So, if you do not know what to do here, say 'N'. + config TOP_ADDR hex default 0xc0000000 if !HOST_2G_2G @@ -35,11 +48,13 @@ config 3_LEVEL_PGTABLES config STUB_CODE hex - default 0xbfffe000 + default 0xbfffe000 if !HOST_2G_2G + default 0x7fffe000 if HOST_2G_2G config STUB_DATA hex - default 0xbffff000 + default 0xbffff000 if !HOST_2G_2G + default 0x7ffff000 if HOST_2G_2G config STUB_START hex diff --git a/arch/um/Makefile b/arch/um/Makefile index a508e7a02891..f6ad832faf13 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -96,7 +96,8 @@ PHONY += linux all: linux linux: vmlinux - ln -f $< $@ + @echo ' LINK $@' + $(Q)ln -f $< $@ define archhelp echo '* linux - Binary kernel image (./linux) - for backward' @@ -117,6 +118,10 @@ prepare: $(ARCH_DIR)/include/kern_constants.h LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib +CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \ + $(call cc-option, -fno-stack-protector,) \ + $(call cc-option, -fno-stack-protector-all,) + CPP_MODE-$(CONFIG_MODE_TT) := -DMODE_TT CONFIG_KERNEL_STACK_ORDER ?= 2 STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] ) @@ -203,8 +208,8 @@ endef $(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h $(call filechk,umlconfig) -$(ARCH_DIR)/user-offsets.s: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.c - $(CC) $(USER_CFLAGS) -S -o $@ $< +$(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE + $(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@ define filechk_gen-asm-offsets (set -e; \ @@ -219,13 +224,11 @@ define filechk_gen-asm-offsets echo ""; ) endef -$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/user-offsets.s +$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s $(call filechk,gen-asm-offsets) -CLEAN_FILES += $(ARCH_DIR)/user-offsets.s - $(ARCH_DIR)/include/kern_constants.h: $(objtree)/$(ARCH_DIR)/include @echo ' SYMLINK $@' - $(Q) ln -sf ../../../include/asm-um/asm-offsets.h $@ + $(Q)ln -sf ../../../include/asm-um/asm-offsets.h $@ -export SUBARCH USER_CFLAGS OS +export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index 7a0e04e34bf9..b65ca115ef77 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -33,5 +33,9 @@ include $(srctree)/arch/i386/Makefile.cpu # prevent gcc from keeping the stack 16 byte aligned. Taken from i386. cflags-y += $(call cc-option,-mpreferred-stack-boundary=2) +# Prevent sprintf in nfsd from being converted to strcpy and resulting in +# an unresolved reference. +cflags-y += -ffreestanding + CFLAGS += $(cflags-y) USER_CFLAGS += $(cflags-y) diff --git a/arch/um/defconfig b/arch/um/defconfig index 80d30d19d750..402a74dc5026 100644 --- a/arch/um/defconfig +++ b/arch/um/defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-mm1 -# Tue Jun 14 18:22:21 2005 +# Linux kernel version: 2.6.17-rc3 +# Fri Apr 28 09:31:20 2006 # CONFIG_GENERIC_HARDIRQS=y CONFIG_UML=y CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_IRQ_RELEASE_METHOD=y # # UML-specific options @@ -16,8 +15,50 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_MODE_TT is not set # CONFIG_STATIC_LINK is not set CONFIG_MODE_SKAS=y + +# +# Host processor type and features +# +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +CONFIG_M686=y +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CMPXCHG=y +CONFIG_X86_XADD=y +CONFIG_X86_L1_CACHE_SHIFT=5 +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_GOOD_APIC=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_TSC=y CONFIG_UML_X86=y # CONFIG_64BIT is not set +CONFIG_SEMAPHORE_SLEEPERS=y +# CONFIG_HOST_2G_2G is not set CONFIG_TOP_ADDR=0xc0000000 # CONFIG_3_LEVEL_PGTABLES is not set CONFIG_STUB_CODE=0xbfffe000 @@ -25,22 +66,24 @@ CONFIG_STUB_DATA=0xbffff000 CONFIG_STUB_START=0xbfffe000 CONFIG_ARCH_HAS_SC_SIGNALS=y CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_LD_SCRIPT_DYN=y CONFIG_NET=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_HOSTFS is not set +# CONFIG_HPPFS is not set CONFIG_MCONSOLE=y # CONFIG_MAGIC_SYSRQ is not set -# CONFIG_HOST_2G_2G is not set CONFIG_NEST_LEVEL=0 -CONFIG_KERNEL_HALF_GIGS=1 # CONFIG_HIGHMEM is not set CONFIG_KERNEL_STACK_ORDER=2 CONFIG_UML_REAL_TIME_CLOCK=y @@ -49,7 +92,6 @@ CONFIG_UML_REAL_TIME_CLOCK=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -57,6 +99,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -64,26 +107,28 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -91,18 +136,43 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # -# Generic Driver Options +# Block layer # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Block devices +# +CONFIG_BLK_DEV_UBD=y +# CONFIG_BLK_DEV_UBD_SYNC is not set +CONFIG_BLK_DEV_COW_COMMON=y +# CONFIG_MMAPPER is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_ATA_OVER_ETH is not set # # Character Devices @@ -127,50 +197,23 @@ CONFIG_UML_SOUND=m CONFIG_SOUND=m CONFIG_HOSTAUDIO=m CONFIG_UML_RANDOM=y -# CONFIG_MMAPPER is not set - -# -# Block devices -# -CONFIG_BLK_DEV_UBD=y -CONFIG_BLK_DEV_UBD_SYNC=y -CONFIG_BLK_DEV_COW_COMMON=y -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set -CONFIG_NETDEVICES=y # -# UML Network Devices +# Generic Driver Options # -CONFIG_UML_NET=y -CONFIG_UML_NET_ETHERTAP=y -CONFIG_UML_NET_TUNTAP=y -CONFIG_UML_NET_SLIP=y -CONFIG_UML_NET_DAEMON=y -CONFIG_UML_NET_MCAST=y -CONFIG_UML_NET_SLIRP=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set # -# Networking support +# Networking # # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -178,6 +221,7 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -186,27 +230,31 @@ CONFIG_INET=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# TCP congestion control -# +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y -CONFIG_TCP_CONG_WESTWOOD=y -CONFIG_TCP_CONG_HTCP=y -# CONFIG_TCP_CONG_HSTCP is not set -# CONFIG_TCP_CONG_HYBLA is not set -# CONFIG_TCP_CONG_VEGAS is not set -# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -224,27 +272,47 @@ CONFIG_TCP_CONG_HTCP=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_KGDBOE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set + +# +# UML Network Devices +# +CONFIG_UML_NET=y +CONFIG_UML_NET_ETHERTAP=y +CONFIG_UML_NET_TUNTAP=y +CONFIG_UML_NET_SLIP=y +CONFIG_UML_NET_DAEMON=y +CONFIG_UML_NET_MCAST=y +# CONFIG_UML_NET_PCAP is not set +CONFIG_UML_NET_SLIRP=y + +# +# Network device support +# +CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # +# PHY device support +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# # Wan interfaces # # CONFIG_WAN is not set @@ -263,6 +331,13 @@ CONFIG_SLIP=m # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # File systems @@ -274,17 +349,14 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set -# CONFIG_REISER4_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -295,11 +367,6 @@ CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m - -# -# Caches -# -# CONFIG_FSCACHE is not set # CONFIG_FUSE_FS is not set # @@ -323,14 +390,10 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set -# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -430,6 +493,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=m # CONFIG_LIBCRC32C is not set @@ -448,12 +512,18 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SLAB_LEAK is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_GPROF is not set # CONFIG_GCOV is not set # CONFIG_SYSCALL_DEBUG is not set diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h index efa3d33c0be6..310980b32173 100644 --- a/arch/um/include/kern_util.h +++ b/arch/um/include/kern_util.h @@ -120,20 +120,11 @@ extern int is_syscall(unsigned long addr); extern void free_irq(unsigned int, void *); extern int cpu(void); +extern void time_init_kern(void); + /* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */ extern int __cant_sleep(void); extern void segv_handler(int sig, union uml_pt_regs *regs); extern void sigio_handler(int sig, union uml_pt_regs *regs); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/longjmp.h b/arch/um/include/longjmp.h index 018b3819ab0b..8e7053013f7b 100644 --- a/arch/um/include/longjmp.h +++ b/arch/um/include/longjmp.h @@ -4,11 +4,11 @@ #include <setjmp.h> #include "os.h" -#define UML_SIGLONGJMP(buf, val) do { \ +#define UML_LONGJMP(buf, val) do { \ longjmp(*buf, val); \ } while(0) -#define UML_SIGSETJMP(buf, enable) ({ \ +#define UML_SETJMP(buf, enable) ({ \ int n; \ enable = get_signals(); \ n = setjmp(*buf); \ diff --git a/arch/um/include/sysdep-i386/kernel-offsets.h b/arch/um/include/sysdep-i386/kernel-offsets.h index 82f96c574144..2c13de321f2f 100644 --- a/arch/um/include/sysdep-i386/kernel-offsets.h +++ b/arch/um/include/sysdep-i386/kernel-offsets.h @@ -1,6 +1,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/elf.h> +#include <asm/mman.h> #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -16,6 +17,7 @@ void foo(void) { OFFSET(HOST_TASK_DEBUGREGS, task_struct, thread.arch.debugregs); + DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE); #ifdef CONFIG_MODE_TT OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid); #endif diff --git a/arch/um/include/sysdep-x86_64/kernel-offsets.h b/arch/um/include/sysdep-x86_64/kernel-offsets.h index 5ce93abd0b54..939cc475757a 100644 --- a/arch/um/include/sysdep-x86_64/kernel-offsets.h +++ b/arch/um/include/sysdep-x86_64/kernel-offsets.h @@ -4,6 +4,7 @@ #include <linux/time.h> #include <linux/elf.h> #include <asm/page.h> +#include <asm/mman.h> #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -18,6 +19,7 @@ void foo(void) { + DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE); #ifdef CONFIG_MODE_TT OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid); #endif diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index c39ea3abeda4..2ffda012385e 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -89,16 +89,18 @@ void sigio_handler(int sig, union uml_pt_regs *regs) struct irq_fd *irq_fd; int n; - if(smp_sigio_handler()) return; - while(1){ + if (smp_sigio_handler()) + return; + + while (1) { n = os_waiting_for_events(active_fds); if (n <= 0) { if(n == -EINTR) continue; else break; } - for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ - if(irq_fd->current_events != 0){ + for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) { + if (irq_fd->current_events != 0) { irq_fd->current_events = 0; do_IRQ(irq_fd->irq, regs); } @@ -110,19 +112,17 @@ void sigio_handler(int sig, union uml_pt_regs *regs) static void maybe_sigio_broken(int fd, int type) { - if(os_isatty(fd)){ - if((type == IRQ_WRITE) && !pty_output_sigio){ + if (os_isatty(fd)) { + if ((type == IRQ_WRITE) && !pty_output_sigio) { write_sigio_workaround(); add_sigio_fd(fd, 0); - } - else if((type == IRQ_READ) && !pty_close_sigio){ + } else if ((type == IRQ_READ) && !pty_close_sigio) { write_sigio_workaround(); add_sigio_fd(fd, 1); } } } - int activate_fd(int irq, int fd, int type, void *dev_id) { struct pollfd *tmp_pfd; @@ -132,16 +132,18 @@ int activate_fd(int irq, int fd, int type, void *dev_id) pid = os_getpid(); err = os_set_fd_async(fd, pid); - if(err < 0) + if (err < 0) goto out; new_fd = um_kmalloc(sizeof(*new_fd)); err = -ENOMEM; - if(new_fd == NULL) + if (new_fd == NULL) goto out; - if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI; - else events = UM_POLLOUT; + if (type == IRQ_READ) + events = UM_POLLIN | UM_POLLPRI; + else + events = UM_POLLOUT; *new_fd = ((struct irq_fd) { .next = NULL, .id = dev_id, .fd = fd, @@ -165,8 +167,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id) * a semaphore. */ flags = irq_lock(); - for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ - if((irq_fd->fd == fd) && (irq_fd->type == type)){ + for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) { + if ((irq_fd->fd == fd) && (irq_fd->type == type)) { printk("Registering fd %d twice\n", fd); printk("Irqs : %d, %d\n", irq_fd->irq, irq); printk("Ids : 0x%p, 0x%p\n", irq_fd->id, dev_id); @@ -175,13 +177,13 @@ int activate_fd(int irq, int fd, int type, void *dev_id) } /*-------------*/ - if(type == IRQ_WRITE) + if (type == IRQ_WRITE) fd = -1; tmp_pfd = NULL; n = 0; - while(1){ + while (1) { n = os_create_pollfd(fd, events, tmp_pfd, n); if (n == 0) break; @@ -198,10 +200,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id) * then we free the buffer tmp_fds and try again. */ irq_unlock(flags); - if (tmp_pfd != NULL) { - kfree(tmp_pfd); - tmp_pfd = NULL; - } + kfree(tmp_pfd); + tmp_pfd = NULL; tmp_pfd = um_kmalloc(n); if (tmp_pfd == NULL) @@ -249,7 +249,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d) { struct irq_and_dev *data = d; - return((irq->irq == data->irq) && (irq->id == data->dev)); + return ((irq->irq == data->irq) && (irq->id == data->dev)); } void free_irq_by_irq_and_dev(unsigned int irq, void *dev) @@ -262,7 +262,7 @@ void free_irq_by_irq_and_dev(unsigned int irq, void *dev) static int same_fd(struct irq_fd *irq, void *fd) { - return(irq->fd == *((int *) fd)); + return (irq->fd == *((int *)fd)); } void free_irq_by_fd(int fd) @@ -276,16 +276,17 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) int i = 0; int fdi; - for(irq=active_fds; irq != NULL; irq = irq->next){ - if((irq->fd == fd) && (irq->irq == irqnum)) break; + for (irq = active_fds; irq != NULL; irq = irq->next) { + if ((irq->fd == fd) && (irq->irq == irqnum)) + break; i++; } - if(irq == NULL){ + if (irq == NULL) { printk("find_irq_by_fd doesn't have descriptor %d\n", fd); goto out; } fdi = os_get_pollfd(i); - if((fdi != -1) && (fdi != fd)){ + if ((fdi != -1) && (fdi != fd)) { printk("find_irq_by_fd - mismatch between active_fds and " "pollfds, fd %d vs %d, need %d\n", irq->fd, fdi, fd); @@ -294,7 +295,7 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) } *index_out = i; out: - return(irq); + return irq; } void reactivate_fd(int fd, int irqnum) @@ -305,7 +306,7 @@ void reactivate_fd(int fd, int irqnum) flags = irq_lock(); irq = find_irq_by_fd(fd, irqnum, &i); - if(irq == NULL){ + if (irq == NULL) { irq_unlock(flags); return; } @@ -326,7 +327,7 @@ void deactivate_fd(int fd, int irqnum) flags = irq_lock(); irq = find_irq_by_fd(fd, irqnum, &i); - if(irq == NULL) + if (irq == NULL) goto out; os_set_pollfd(i, -1); out: @@ -338,15 +339,15 @@ int deactivate_all_fds(void) struct irq_fd *irq; int err; - for(irq=active_fds;irq != NULL;irq = irq->next){ + for (irq = active_fds; irq != NULL; irq = irq->next) { err = os_clear_fd_async(irq->fd); - if(err) - return(err); + if (err) + return err; } /* If there is a signal already queued, after unblocking ignore it */ os_set_ioignore(); - return(0); + return 0; } void forward_interrupts(int pid) @@ -356,9 +357,9 @@ void forward_interrupts(int pid) int err; flags = irq_lock(); - for(irq=active_fds;irq != NULL;irq = irq->next){ + for (irq = active_fds; irq != NULL; irq = irq->next) { err = os_set_owner(irq->fd, pid); - if(err < 0){ + if (err < 0) { /* XXX Just remove the irq rather than * print out an infinite stream of these */ @@ -379,7 +380,7 @@ void forward_interrupts(int pid) unsigned int do_IRQ(int irq, union uml_pt_regs *regs) { irq_enter(); - __do_IRQ(irq, (struct pt_regs *) regs); + __do_IRQ(irq, (struct pt_regs *)regs); irq_exit(); return 1; } @@ -392,12 +393,12 @@ int um_request_irq(unsigned int irq, int fd, int type, int err; err = request_irq(irq, handler, irqflags, devname, dev_id); - if(err) - return(err); + if (err) + return err; - if(fd != -1) + if (fd != -1) err = activate_fd(irq, fd, type, dev_id); - return(err); + return err; } EXPORT_SYMBOL(um_request_irq); EXPORT_SYMBOL(reactivate_fd); @@ -409,7 +410,7 @@ unsigned long irq_lock(void) unsigned long flags; spin_lock_irqsave(&irq_spinlock, flags); - return(flags); + return flags; } void irq_unlock(unsigned long flags) @@ -452,7 +453,7 @@ void __init init_IRQ(void) irq_desc[TIMER_IRQ].depth = 1; irq_desc[TIMER_IRQ].handler = &SIGVTALRM_irq_type; enable_irq(TIMER_IRQ); - for(i=1;i<NR_IRQS;i++){ + for (i = 1; i < NR_IRQS; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; irq_desc[i].depth = 1; @@ -467,7 +468,7 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *, int fds[2], err; err = os_pipe(fds, 1, 1); - if(err){ + if (err) { printk("init_aio_irq - os_pipe failed, err = %d\n", -err); goto out; } @@ -475,7 +476,7 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *, err = um_request_irq(irq, fds[0], IRQ_READ, handler, SA_INTERRUPT | SA_SAMPLE_RANDOM, name, (void *) (long) fds[0]); - if(err){ + if (err) { printk("init_aio_irq - : um_request_irq failed, err = %d\n", err); goto out_close; @@ -488,5 +489,5 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *, os_close_file(fds[0]); os_close_file(fds[1]); out: - return(err); + return err; } diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index 0500800df1c1..fc0f0b085ca7 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -407,6 +407,8 @@ unsigned long find_iomem(char *driver, unsigned long *len_out) *len_out = region->size; return(region->virt); } + + region = region->next; } return(0); diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 60d2eda995c1..9a77fb3c269d 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -275,15 +275,13 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) if (unlikely(current->audit_context)) { if (!entryexit) - audit_syscall_entry(current, - HOST_AUDIT_ARCH, + audit_syscall_entry(HOST_AUDIT_ARCH, UPT_SYSCALL_NR(regs), UPT_SYSCALL_ARG1(regs), UPT_SYSCALL_ARG2(regs), UPT_SYSCALL_ARG3(regs), UPT_SYSCALL_ARG4(regs)); - else audit_syscall_exit(current, - AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), + else audit_syscall_exit(AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), UPT_SYSCALL_RET(regs)); } diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile index 57181a920d48..ea3a8e409a6e 100644 --- a/arch/um/kernel/skas/Makefile +++ b/arch/um/kernel/skas/Makefile @@ -6,9 +6,11 @@ obj-y := clone.o exec_kern.o mem.o mmu.o process_kern.o \ syscall.o tlb.o uaccess.o -USER_OBJS := clone.o +# clone.o is in the stub, so it can't be built with profiling +# GCC hardened also auto-enables -fpic, but we need %ebx so it can't work -> +# disable it -include arch/um/scripts/Makefile.rules +CFLAGS_clone.o := $(CFLAGS_NO_HARDENING) +UNPROFILE_OBJS := clone.o -# clone.o is in the stub, so it can't be built with profiling -$(obj)/clone.o : c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) +include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c index 3c7626cdba4b..86f51d04c98d 100644 --- a/arch/um/kernel/time_kern.c +++ b/arch/um/kernel/time_kern.c @@ -84,6 +84,16 @@ void timer_irq(union uml_pt_regs *regs) } } + +void time_init_kern(void) +{ + unsigned long long nsecs; + + nsecs = os_nsecs(); + set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION, + -nsecs % BILLION); +} + void do_boot_timer_handler(struct sigcontext * sc) { struct pt_regs regs; @@ -209,4 +219,4 @@ int __init timer_init(void) return(0); } -__initcall(timer_init); +arch_initcall(timer_init); diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index 3bd10deea280..09251338d99e 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -171,7 +171,7 @@ int os_sigio_async(int master, int slave) flags = fcntl(master, F_GETFL); if(flags < 0) - return errno; + return -errno; if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) || (fcntl(master, F_SETOWN, os_getpid()) < 0)) diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c index e599be423da1..3788d4568d33 100644 --- a/arch/um/os-Linux/irq.c +++ b/arch/um/os-Linux/irq.c @@ -29,21 +29,21 @@ int os_waiting_for_events(struct irq_fd *active_fds) int i, n, err; n = poll(pollfds, pollfds_num, 0); - if(n < 0){ + if (n < 0) { err = -errno; - if(errno != EINTR) + if (errno != EINTR) printk("sigio_handler: os_waiting_for_events:" " poll returned %d, errno = %d\n", n, errno); return err; } - if(n == 0) + if (n == 0) return 0; irq_fd = active_fds; - for(i = 0; i < pollfds_num; i++){ - if(pollfds[i].revents != 0){ + for (i = 0; i < pollfds_num; i++) { + if (pollfds[i].revents != 0) { irq_fd->current_events = pollfds[i].revents; pollfds[i].fd = -1; } @@ -54,7 +54,7 @@ int os_waiting_for_events(struct irq_fd *active_fds) int os_isatty(int fd) { - return(isatty(fd)); + return isatty(fd); } int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds) @@ -65,7 +65,7 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds) return((pollfds_size + 1) * sizeof(pollfds[0])); } - if(pollfds != NULL){ + if (pollfds != NULL) { memcpy(tmp_pfd, pollfds, sizeof(pollfds[0]) * pollfds_size); /* remove old pollfds */ @@ -73,18 +73,15 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds) } pollfds = tmp_pfd; pollfds_size++; - } else { - /* remove not used tmp_pfd */ - if (tmp_pfd != NULL) - kfree(tmp_pfd); - } + } else + kfree(tmp_pfd); /* remove not used tmp_pfd */ - pollfds[pollfds_num] = ((struct pollfd) { .fd = fd, - .events = events, - .revents = 0 }); + pollfds[pollfds_num] = ((struct pollfd) { .fd = fd, + .events = events, + .revents = 0 }); pollfds_num++; - return(0); + return 0; } void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, @@ -94,11 +91,11 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, int i = 0; prev = &active_fds; - while(*prev != NULL){ - if((*test)(*prev, arg)){ + while (*prev != NULL) { + if ((*test)(*prev, arg)) { struct irq_fd *old_fd = *prev; - if((pollfds[i].fd != -1) && - (pollfds[i].fd != (*prev)->fd)){ + if ((pollfds[i].fd != -1) && + (pollfds[i].fd != (*prev)->fd)) { printk("os_free_irq_by_cb - mismatch between " "active_fds and pollfds, fd %d vs %d\n", (*prev)->fd, pollfds[i].fd); @@ -110,7 +107,6 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, /* This moves the *whole* array after pollfds[i] * (though it doesn't spot as such)! */ - memmove(&pollfds[i], &pollfds[i + 1], (pollfds_num - i) * sizeof(pollfds[0])); if(*last_irq_ptr2 == &old_fd->next) @@ -129,10 +125,9 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, return; } - int os_get_pollfd(int i) { - return(pollfds[i].fd); + return pollfds[i].fd; } void os_set_pollfd(int i, int fd) @@ -151,8 +146,10 @@ void init_irq_signals(int on_sigstack) int flags; flags = on_sigstack ? SA_ONSTACK : 0; - if(timer_irq_inited) h = (__sighandler_t) alarm_handler; - else h = boot_timer_handler; + if (timer_irq_inited) + h = (__sighandler_t)alarm_handler; + else + h = boot_timer_handler; set_handler(SIGVTALRM, h, flags | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1); diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index 2878e89a674f..90912aaca7aa 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -59,7 +59,7 @@ static __init void do_uml_initcalls(void) initcall_t *call; call = &__uml_initcall_start; - while (call < &__uml_initcall_end){; + while (call < &__uml_initcall_end){ (*call)(); call++; } @@ -74,6 +74,34 @@ static void last_ditch_exit(int sig) exit(1); } +#define UML_LIB_PATH ":/usr/lib/uml" + +static void setup_env_path(void) +{ + char *new_path = NULL; + char *old_path = NULL; + int path_len = 0; + + old_path = getenv("PATH"); + /* if no PATH variable is set or it has an empty value + * just use the default + /usr/lib/uml + */ + if (!old_path || (path_len = strlen(old_path)) == 0) { + putenv("PATH=:/bin:/usr/bin/" UML_LIB_PATH); + return; + } + + /* append /usr/lib/uml to the existing path */ + path_len += strlen("PATH=" UML_LIB_PATH) + 1; + new_path = malloc(path_len); + if (!new_path) { + perror("coudn't malloc to set a new PATH"); + return; + } + snprintf(new_path, path_len, "PATH=%s" UML_LIB_PATH, old_path); + putenv(new_path); +} + extern int uml_exitcode; extern void scan_elf_aux( char **envp); @@ -114,6 +142,8 @@ int main(int argc, char **argv, char **envp) set_stklim(); + setup_env_path(); + new_argv = malloc((argc + 1) * sizeof(char *)); if(new_argv == NULL){ perror("Mallocing argv"); diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 71bb90a7606d..c6432e729241 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -8,6 +8,7 @@ #include <fcntl.h> #include <sys/types.h> #include <sys/mman.h> +#include <sys/statfs.h> #include "kern_util.h" #include "user.h" #include "user_util.h" @@ -19,6 +20,7 @@ #include <sys/param.h> +static char *default_tmpdir = "/tmp"; static char *tempdir = NULL; static void __init find_tempdir(void) @@ -34,7 +36,7 @@ static void __init find_tempdir(void) break; } if((dir == NULL) || (*dir == '\0')) - dir = "/tmp"; + dir = default_tmpdir; tempdir = malloc(strlen(dir) + 2); if(tempdir == NULL){ @@ -46,6 +48,96 @@ static void __init find_tempdir(void) strcat(tempdir, "/"); } +/* This will return 1, with the first character in buf being the + * character following the next instance of c in the file. This will + * read the file as needed. If there's an error, -errno is returned; + * if the end of the file is reached, 0 is returned. + */ +static int next(int fd, char *buf, int size, char c) +{ + int n; + char *ptr; + + while((ptr = strchr(buf, c)) == NULL){ + n = read(fd, buf, size - 1); + if(n == 0) + return 0; + else if(n < 0) + return -errno; + + buf[n] = '\0'; + } + + ptr++; + memmove(buf, ptr, strlen(ptr) + 1); + return 1; +} + +static int checked_tmpdir = 0; + +/* Look for a tmpfs mounted at /dev/shm. I couldn't find a cleaner + * way to do this than to parse /proc/mounts. statfs will return the + * same filesystem magic number and fs id for both /dev and /dev/shm + * when they are both tmpfs, so you can't tell if they are different + * filesystems. Also, there seems to be no other way of finding the + * mount point of a filesystem from within it. + * + * If a /dev/shm tmpfs entry is found, then we switch to using it. + * Otherwise, we stay with the default /tmp. + */ +static void which_tmpdir(void) +{ + int fd, found; + char buf[128] = { '\0' }; + + if(checked_tmpdir) + return; + + checked_tmpdir = 1; + + printf("Checking for tmpfs mount on /dev/shm..."); + + fd = open("/proc/mounts", O_RDONLY); + if(fd < 0){ + printf("failed to open /proc/mounts, errno = %d\n", errno); + return; + } + + while(1){ + found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), ' '); + if(found != 1) + break; + + if(!strncmp(buf, "/dev/shm", strlen("/dev/shm"))) + goto found; + + found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), '\n'); + if(found != 1) + break; + } + +err: + if(found == 0) + printf("nothing mounted on /dev/shm\n"); + else if(found < 0) + printf("read returned errno %d\n", -found); + + return; + +found: + found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), ' '); + if(found != 1) + goto err; + + if(strncmp(buf, "tmpfs", strlen("tmpfs"))){ + printf("not tmpfs\n"); + return; + } + + printf("OK\n"); + default_tmpdir = "/dev/shm"; +} + /* * This proc still used in tt-mode * (file: kernel/tt/ptproxy/proxy.c, proc: start_debugger). @@ -56,6 +148,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink) char *tempname; int fd; + which_tmpdir(); tempname = malloc(MAXPATHLEN); find_tempdir(); @@ -137,3 +230,26 @@ int create_mem_file(unsigned long long len) } return(fd); } + + +void check_tmpexec(void) +{ + void *addr; + int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE); + + addr = mmap(NULL, UM_KERN_PAGE_SIZE, + PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0); + printf("Checking PROT_EXEC mmap in %s...",tempdir); + fflush(stdout); + if(addr == MAP_FAILED){ + err = errno; + perror("failed"); + if(err == EPERM) + printf("%s must be not mounted noexec\n",tempdir); + exit(1); + } + printf("OK\n"); + munmap(addr, UM_KERN_PAGE_SIZE); + + close(fd); +} diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 8176b0b52047..233be2f4f8cb 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -190,7 +190,7 @@ int os_unmap_memory(void *addr, int len) } #ifndef MADV_REMOVE -#define MADV_REMOVE 0x5 /* remove these pages & resources */ +#define MADV_REMOVE KERNEL_MADV_REMOVE #endif int os_drop_memory(void *addr, int length) @@ -206,29 +206,36 @@ int os_drop_memory(void *addr, int length) int can_drop_memory(void) { void *addr; - int fd; + int fd, ok = 0; printk("Checking host MADV_REMOVE support..."); fd = create_mem_file(UM_KERN_PAGE_SIZE); if(fd < 0){ printk("Creating test memory file failed, err = %d\n", -fd); - return 0; + goto out; } addr = mmap64(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE, - MAP_PRIVATE, fd, 0); + MAP_SHARED, fd, 0); if(addr == MAP_FAILED){ printk("Mapping test memory file failed, err = %d\n", -errno); - return 0; + goto out_close; } if(madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0){ printk("MADV_REMOVE failed, err = %d\n", -errno); - return 0; + goto out_unmap; } printk("OK\n"); - return 1; + ok = 1; + +out_unmap: + munmap(addr, UM_KERN_PAGE_SIZE); +out_close: + close(fd); +out: + return ok; } void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)) @@ -266,11 +273,11 @@ void init_new_thread_signals(int altstack) int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr) { - sigjmp_buf buf; + jmp_buf buf; int n, enable; *jmp_ptr = &buf; - n = UML_SIGSETJMP(&buf, enable); + n = UML_SETJMP(&buf, enable); if(n != 0) return(n); (*fn)(arg); diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 045ae0037456..bd89c6b99d5d 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -344,12 +344,12 @@ int copy_context_skas0(unsigned long new_stack, int pid) err = ptrace_setregs(pid, regs); if(err < 0) panic("copy_context_skas0 : PTRACE_SETREGS failed, " - "pid = %d, errno = %d\n", pid, errno); + "pid = %d, errno = %d\n", pid, -err); err = ptrace_setfpregs(pid, fp_regs); if(err < 0) panic("copy_context_skas0 : PTRACE_SETFPREGS failed, " - "pid = %d, errno = %d\n", pid, errno); + "pid = %d, errno = %d\n", pid, -err); /* set a well known return code for detection of child write failure */ child_data->err = 12345678; @@ -362,7 +362,7 @@ int copy_context_skas0(unsigned long new_stack, int pid) pid = data->err; if(pid < 0) panic("copy_context_skas0 - stub-parent reports error %d\n", - pid); + -pid); /* Wait, until child has finished too: read child's result from * child's stack and check it. @@ -434,7 +434,7 @@ void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, void (*handler)(int)) { unsigned long flags; - sigjmp_buf switch_buf, fork_buf; + jmp_buf switch_buf, fork_buf; int enable; *switch_buf_ptr = &switch_buf; @@ -450,7 +450,7 @@ void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, */ flags = get_signals(); block_signals(); - if(UML_SIGSETJMP(&fork_buf, enable) == 0) + if(UML_SETJMP(&fork_buf, enable) == 0) new_thread_proc(stack, handler); remove_sigstack(); @@ -466,35 +466,35 @@ void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, void thread_wait(void *sw, void *fb) { - sigjmp_buf buf, **switch_buf = sw, *fork_buf; + jmp_buf buf, **switch_buf = sw, *fork_buf; int enable; *switch_buf = &buf; fork_buf = fb; - if(UML_SIGSETJMP(&buf, enable) == 0) + if(UML_SETJMP(&buf, enable) == 0) siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK); } void switch_threads(void *me, void *next) { - sigjmp_buf my_buf, **me_ptr = me, *next_buf = next; + jmp_buf my_buf, **me_ptr = me, *next_buf = next; int enable; *me_ptr = &my_buf; - if(UML_SIGSETJMP(&my_buf, enable) == 0) - UML_SIGLONGJMP(next_buf, 1); + if(UML_SETJMP(&my_buf, enable) == 0) + UML_LONGJMP(next_buf, 1); } -static sigjmp_buf initial_jmpbuf; +static jmp_buf initial_jmpbuf; /* XXX Make these percpu */ static void (*cb_proc)(void *arg); static void *cb_arg; -static sigjmp_buf *cb_back; +static jmp_buf *cb_back; int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) { - sigjmp_buf **switch_buf = switch_buf_ptr; + jmp_buf **switch_buf = switch_buf_ptr; int n, enable; set_handler(SIGWINCH, (__sighandler_t) sig_handler, @@ -502,7 +502,7 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) SIGVTALRM, -1); *fork_buf_ptr = &initial_jmpbuf; - n = UML_SIGSETJMP(&initial_jmpbuf, enable); + n = UML_SETJMP(&initial_jmpbuf, enable); switch(n){ case INIT_JMP_NEW_THREAD: new_thread_proc((void *) stack, new_thread_handler); @@ -512,7 +512,7 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) break; case INIT_JMP_CALLBACK: (*cb_proc)(cb_arg); - UML_SIGLONGJMP(cb_back, 1); + UML_LONGJMP(cb_back, 1); break; case INIT_JMP_HALT: kmalloc_ok = 0; @@ -523,12 +523,12 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) default: panic("Bad sigsetjmp return in start_idle_thread - %d\n", n); } - UML_SIGLONGJMP(*switch_buf, 1); + UML_LONGJMP(*switch_buf, 1); } void initial_thread_cb_skas(void (*proc)(void *), void *arg) { - sigjmp_buf here; + jmp_buf here; int enable; cb_proc = proc; @@ -536,8 +536,8 @@ void initial_thread_cb_skas(void (*proc)(void *), void *arg) cb_back = &here; block_signals(); - if(UML_SIGSETJMP(&here, enable) == 0) - UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK); + if(UML_SETJMP(&here, enable) == 0) + UML_LONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK); unblock_signals(); cb_proc = NULL; @@ -548,13 +548,13 @@ void initial_thread_cb_skas(void (*proc)(void *), void *arg) void halt_skas(void) { block_signals(); - UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_HALT); + UML_LONGJMP(&initial_jmpbuf, INIT_JMP_HALT); } void reboot_skas(void) { block_signals(); - UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT); + UML_LONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT); } void switch_mm_skas(struct mm_id *mm_idp) diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 387e26af301a..503148504009 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -296,29 +296,7 @@ static void __init check_ptrace(void) check_sysemu(); } -extern int create_tmp_file(unsigned long long len); - -static void check_tmpexec(void) -{ - void *addr; - int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE); - - addr = mmap(NULL, UM_KERN_PAGE_SIZE, - PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0); - printf("Checking PROT_EXEC mmap in /tmp..."); - fflush(stdout); - if(addr == MAP_FAILED){ - err = errno; - perror("failed"); - if(err == EPERM) - printf("/tmp must be not mounted noexec\n"); - exit(1); - } - printf("OK\n"); - munmap(addr, UM_KERN_PAGE_SIZE); - - close(fd); -} +extern void check_tmpexec(void); void os_early_checks(void) { diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index 7a6f6b99ceff..516f66dd87e3 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -104,7 +104,7 @@ void init_registers(int pid) err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs); if(err) panic("check_ptrace : PTRACE_GETREGS failed, errno = %d", - err); + errno); errno = 0; err = ptrace(PTRACE_GETFPXREGS, pid, 0, exec_fpx_regs); @@ -119,7 +119,7 @@ void init_registers(int pid) err = ptrace(PTRACE_GETFPREGS, pid, 0, exec_fp_regs); if(err) panic("check_ptrace : PTRACE_GETFPREGS failed, errno = %d", - err); + errno); } void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c index 001941fa1a1e..becd898d9398 100644 --- a/arch/um/os-Linux/sys-x86_64/registers.c +++ b/arch/um/os-Linux/sys-x86_64/registers.c @@ -62,12 +62,12 @@ void init_registers(int pid) err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs); if(err) panic("check_ptrace : PTRACE_GETREGS failed, errno = %d", - err); + errno); err = ptrace(PTRACE_GETFPREGS, pid, 0, exec_fp_regs); if(err) panic("check_ptrace : PTRACE_GETFPREGS failed, errno = %d", - err); + errno); } void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index 6f7626775acb..280c4fb9b585 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -81,20 +81,12 @@ void uml_idle_timer(void) set_interval(ITIMER_REAL); } -extern void ktime_get_ts(struct timespec *ts); -#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts) - void time_init(void) { - struct timespec now; - if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR) panic("Couldn't set SIGVTALRM handler"); set_interval(ITIMER_VIRTUAL); - - do_posix_clock_monotonic_gettime(&now); - wall_to_monotonic.tv_sec = -now.tv_sec; - wall_to_monotonic.tv_nsec = -now.tv_nsec; + time_init_kern(); } unsigned long long os_nsecs(void) diff --git a/arch/um/os-Linux/trap.c b/arch/um/os-Linux/trap.c index a9f6b26f9828..90b29ae9af46 100644 --- a/arch/um/os-Linux/trap.c +++ b/arch/um/os-Linux/trap.c @@ -35,7 +35,7 @@ void os_fill_handlinfo(struct kern_handlers h) void do_longjmp(void *b, int val) { - sigjmp_buf *buf = b; + jmp_buf *buf = b; - UML_SIGLONGJMP(buf, val); + UML_LONGJMP(buf, val); } diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c index 166fb66995df..e523719330b2 100644 --- a/arch/um/os-Linux/uaccess.c +++ b/arch/um/os-Linux/uaccess.c @@ -16,9 +16,9 @@ unsigned long __do_user_copy(void *to, const void *from, int n, unsigned long *faddrp = (unsigned long *) fault_addr, ret; int enable; - sigjmp_buf jbuf; + jmp_buf jbuf; *fault_catcher = &jbuf; - if(UML_SIGSETJMP(&jbuf, enable) == 0){ + if(UML_SETJMP(&jbuf, enable) == 0){ (*op)(to, from, n); ret = 0; *faulted_out = 0; diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c index 34bfc1bb9e38..362db059fe30 100644 --- a/arch/um/os-Linux/umid.c +++ b/arch/um/os-Linux/umid.c @@ -178,14 +178,14 @@ static void __init create_pid_file(void) fd = open(file, O_RDWR | O_CREAT | O_EXCL, 0644); if(fd < 0){ printk("Open of machine pid file \"%s\" failed: %s\n", - file, strerror(-fd)); + file, strerror(errno)); return; } snprintf(pid, sizeof(pid), "%d\n", getpid()); n = write(fd, pid, strlen(pid)); if(n != strlen(pid)) - printk("Write of pid file failed - err = %d\n", -n); + printk("Write of pid file failed - err = %d\n", errno); close(fd); } diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 2598158e1f53..3f33165ada68 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -96,6 +96,13 @@ EXPORT_SYMBOL_PROTO(getuid); EXPORT_SYMBOL_PROTO(fsync); EXPORT_SYMBOL_PROTO(fdatasync); +/* Export symbols used by GCC for the stack protector. */ +extern void __stack_smash_handler(void *) __attribute__((weak)); +EXPORT_SYMBOL(__stack_smash_handler); + +extern long __guard __attribute__((weak)); +EXPORT_SYMBOL(__guard); + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index e32065e2fdc8..c47a2a7ce70e 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -104,7 +104,7 @@ void setup_hostinfo(void) int setjmp_wrapper(void (*proc)(void *, void *), ...) { va_list args; - sigjmp_buf buf; + jmp_buf buf; int n; n = sigsetjmp(buf, 1); diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 5e7a9c310aa5..1347dc6d5218 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -7,11 +7,19 @@ USER_SINGLE_OBJS := \ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m) $(USER_SINGLE_OBJS)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) -$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \ - c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@)) +$(USER_OBJS:.o=.%): \ + c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(*F).o) $(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \ -Dunix -D__unix__ -D__$(SUBARCH)__ +# These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of +# using it directly. +UNPROFILE_OBJS := $(foreach file,$(UNPROFILE_OBJS),$(obj)/$(file)) + +$(UNPROFILE_OBJS:.o=.%): \ + c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) $(CFLAGS_$(*F).o) +$(UNPROFILE_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \ + -Dunix -D__unix__ -D__$(SUBARCH)__ # The stubs and unmap.o can't try to call mcount or update basic block data define unprofile diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 98b20b7bba4f..374d61a19439 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -8,11 +8,16 @@ subarch-obj-y = lib/bitops.o kernel/semaphore.o subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o subarch-obj-$(CONFIG_MODULES) += kernel/module.o -USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o +USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o -include arch/um/scripts/Makefile.rules +USER_OBJS += user-offsets.s +extra-y += user-offsets.s extra-$(CONFIG_MODE_TT) += unmap.o -$(obj)/stub_segv.o $(obj)/unmap.o: \ - _c_flags = $(call unprofile,$(CFLAGS)) +UNPROFILE_OBJS := stub_segv.o +CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING) + +include arch/um/scripts/Makefile.rules + +$(obj)/unmap.%: _c_flags = $(call unprofile,$(CFLAGS)) diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c index 618fd8594643..0709fc6670c2 100644 --- a/arch/um/sys-i386/signal.c +++ b/arch/um/sys-i386/signal.c @@ -57,7 +57,7 @@ static int copy_sc_from_user_skas(struct pt_regs *regs, return(0); } -int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate __user *to_fp, +int copy_sc_to_user_skas(struct sigcontext __user *to, struct _fpstate __user *to_fp, struct pt_regs *regs, unsigned long sp) { struct sigcontext sc; @@ -132,7 +132,7 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from, return(err); } -int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate __user *fp, +int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp, struct sigcontext *from, int fpsize, unsigned long sp) { struct _fpstate __user *to_fp; @@ -167,7 +167,7 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from) return(ret); } -static int copy_sc_to_user(struct sigcontext *to, struct _fpstate __user *fp, +static int copy_sc_to_user(struct sigcontext __user *to, struct _fpstate __user *fp, struct pt_regs *from, unsigned long sp) { return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs), diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c index a37f672ec964..2355dc19c46c 100644 --- a/arch/um/sys-i386/stub_segv.c +++ b/arch/um/sys-i386/stub_segv.c @@ -27,6 +27,6 @@ stub_segv_handler(int sig) * the stack in its original form when we do the sigreturn here, by * hand. */ - __asm__("mov %0,%%esp ; movl %1, %%eax ; " - "int $0x80" : : "a" (sc), "g" (__NR_sigreturn)); + __asm__ __volatile__("mov %0,%%esp ; movl %1, %%eax ; " + "int $0x80" : : "a" (sc), "g" (__NR_sigreturn)); } diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c index 749dd1bfe60f..710d5fb807e1 100644 --- a/arch/um/sys-i386/syscalls.c +++ b/arch/um/sys-i386/syscalls.c @@ -99,11 +99,12 @@ long sys_ipc (uint call, int first, int second, switch (call) { case SEMOP: - return sys_semtimedop(first, (struct sembuf *) ptr, second, - NULL); + return sys_semtimedop(first, (struct sembuf __user *) ptr, + second, NULL); case SEMTIMEDOP: - return sys_semtimedop(first, (struct sembuf *) ptr, second, - (const struct timespec *) fifth); + return sys_semtimedop(first, (struct sembuf __user *) ptr, + second, + (const struct timespec __user *) fifth); case SEMGET: return sys_semget (first, second, third); case SEMCTL: { diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index b5fc22babddf..c19794d435d6 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -16,11 +16,16 @@ subarch-obj-$(CONFIG_MODULES) += kernel/module.o ldt-y = ../sys-i386/ldt.o -USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o +USER_OBJS := ptrace_user.o sigcontext.o -include arch/um/scripts/Makefile.rules +USER_OBJS += user-offsets.s +extra-y += user-offsets.s extra-$(CONFIG_MODE_TT) += unmap.o -$(obj)/stub_segv.o $(obj)/unmap.o: \ - _c_flags = $(call unprofile,$(CFLAGS)) +UNPROFILE_OBJS := stub_segv.o +CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING) + +include arch/um/scripts/Makefile.rules + +$(obj)/unmap.%: _c_flags = $(call unprofile,$(CFLAGS)) diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index a4c46a8af008..9edf114faf79 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -21,7 +21,7 @@ #include "skas.h" static int copy_sc_from_user_skas(struct pt_regs *regs, - struct sigcontext *from) + struct sigcontext __user *from) { int err = 0; @@ -54,7 +54,8 @@ static int copy_sc_from_user_skas(struct pt_regs *regs, return(err); } -int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, +int copy_sc_to_user_skas(struct sigcontext __user *to, + struct _fpstate __user *to_fp, struct pt_regs *regs, unsigned long mask, unsigned long sp) { @@ -106,10 +107,11 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, #endif #ifdef CONFIG_MODE_TT -int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, +int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from, int fpsize) { - struct _fpstate *to_fp, *from_fp; + struct _fpstate *to_fp; + struct _fpstate __user *from_fp; unsigned long sigs; int err; @@ -124,13 +126,14 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, return(err); } -int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, +int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp, struct sigcontext *from, int fpsize, unsigned long sp) { - struct _fpstate *to_fp, *from_fp; + struct _fpstate __user *to_fp; + struct _fpstate *from_fp; int err; - to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); + to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1)); from_fp = from->fpstate; err = copy_to_user(to, from, sizeof(*to)); /* The SP in the sigcontext is the updated one for the signal @@ -158,7 +161,8 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from) return(ret); } -static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp, +static int copy_sc_to_user(struct sigcontext __user *to, + struct _fpstate __user *fp, struct pt_regs *from, unsigned long mask, unsigned long sp) { @@ -169,7 +173,7 @@ static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp, struct rt_sigframe { - char *pretcode; + char __user *pretcode; struct ucontext uc; struct siginfo info; }; @@ -188,7 +192,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, frame = (struct rt_sigframe __user *) round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8; - frame = (struct rt_sigframe *) ((unsigned long) frame - 128); + frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128); if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) goto out; diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c index a27099533198..1c967026c957 100644 --- a/arch/um/sys-x86_64/stub_segv.c +++ b/arch/um/sys-x86_64/stub_segv.c @@ -33,7 +33,7 @@ stub_segv_handler(int sig) struct ucontext *uc; int pid; - __asm__("movq %%rdx, %0" : "=g" (uc) :); + __asm__ __volatile__("movq %%rdx, %0" : "=g" (uc) :); GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), &uc->uc_mcontext); @@ -44,8 +44,8 @@ stub_segv_handler(int sig) * the signal frame. So, we use the ucontext pointer, which we know * already, to get the signal frame pointer, and add 8 to that. */ - __asm__("movq %0, %%rsp; movq %1, %%rax ; syscall": : - "g" ((unsigned long) container_of(uc, struct rt_sigframe, - uc) + 8), - "g" (__NR_rt_sigreturn)); + __asm__ __volatile__("movq %0, %%rsp; movq %1, %%rax ; syscall": : + "g" ((unsigned long) + container_of(uc, struct rt_sigframe, uc) + 8), + "g" (__NR_rt_sigreturn)); } diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 6acee5c4ada6..6fce9f45dfdc 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -45,7 +45,7 @@ static long arch_prctl_tt(int code, unsigned long addr) case ARCH_GET_GS: ret = arch_prctl(code, (unsigned long) &tmp); if(!ret) - ret = put_user(tmp, &addr); + ret = put_user(tmp, (long __user *)addr); break; default: ret = -EINVAL; diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 3c45ec22b3fe..69db0c0721d1 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Mon Apr 3 16:11:14 2006 +# Linux kernel version: 2.6.17-rc1-git11 +# Sun Apr 16 07:22:36 2006 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -57,6 +57,7 @@ CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_DOUBLEFAULT=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -121,6 +122,7 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_PREEMPT_BKL=y CONFIG_NUMA=y CONFIG_K8_NUMA=y +CONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y CONFIG_NUMA_EMU=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y @@ -544,7 +546,6 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -1045,9 +1046,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1118,6 +1117,14 @@ CONFIG_USB_MON=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile index 929e6b0771f8..e9263b4975e0 100644 --- a/arch/x86_64/ia32/Makefile +++ b/arch/x86_64/ia32/Makefile @@ -27,5 +27,5 @@ $(obj)/vsyscall-sysenter.so $(obj)/vsyscall-syscall.so: \ $(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE $(call if_changed,syscall) -AFLAGS_vsyscall-sysenter.o = -m32 -AFLAGS_vsyscall-syscall.o = -m32 +AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32 +AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32 diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index e776139afb20..926c4743d13b 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -339,7 +339,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, struct mm_struct *mm = current->mm; int i, ret; - stack_base = IA32_STACK_TOP - MAX_ARG_PAGES * PAGE_SIZE; + stack_base = stack_top - MAX_ARG_PAGES * PAGE_SIZE; mm->arg_start = bprm->p + stack_base; bprm->p += stack_base; @@ -357,7 +357,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, { mpnt->vm_mm = mm; mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p; - mpnt->vm_end = IA32_STACK_TOP; + mpnt->vm_end = stack_top; if (executable_stack == EXSTACK_ENABLE_X) mpnt->vm_flags = VM_STACK_FLAGS | VM_EXEC; else if (executable_stack == EXSTACK_DISABLE_X) diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 5a9802676689..5a92fed2d1d5 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -694,4 +694,6 @@ ia32_sys_call_table: .quad compat_sys_get_robust_list .quad sys_splice .quad sys_sync_file_range + .quad sys_tee + .quad compat_sys_vmsplice ia32_syscall_end: diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index a098a11e7755..059c88313f4e 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -8,7 +8,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \ x8664_ksyms.o i387.o syscall.o vsyscall.o \ setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \ - dmi_scan.o pci-dma.o pci-nommu.o + pci-dma.o pci-nommu.o obj-$(CONFIG_X86_MCE) += mce.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o @@ -49,5 +49,3 @@ intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o -dmi_scan-y += ../../i386/kernel/dmi_scan.o - diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 62776c07cff1..1ef6028f721e 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -76,6 +76,12 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) *addrp = __pa_symbol(&_end); return 1; } + + if (last >= ebda_addr && addr < ebda_addr + ebda_size) { + *addrp = ebda_addr + ebda_size; + return 1; + } + /* XXX ramdisk image here? */ return 0; } @@ -143,7 +149,7 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsi addr = start; if (addr > ei->addr + ei->size) continue; - while (bad_addr(&addr, size) && addr+size < ei->addr + ei->size) + while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size) ; last = addr + size; if (last > ei->addr + ei->size) diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index c946e4fe67a7..586b34c00c48 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -281,12 +281,7 @@ tracesys: ja 1f movq %r10,%rcx /* fixup for C */ call *sys_call_table(,%rax,8) - movq %rax,RAX-ARGOFFSET(%rsp) -1: SAVE_REST - movq %rsp,%rdi - call syscall_trace_leave - RESTORE_TOP_OF_STACK %rbx - RESTORE_REST +1: movq %rax,RAX-ARGOFFSET(%rsp) /* Use IRET because user could have changed frame */ jmp int_ret_from_sys_call CFI_ENDPROC diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 77b4c608cca0..9cc7031b7151 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -271,6 +271,18 @@ __setup("enable_8254_timer", setup_enable_8254_timer); #include <linux/pci_ids.h> #include <linux/pci.h> + +#ifdef CONFIG_ACPI + +static int nvidia_hpet_detected __initdata; + +static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) +{ + nvidia_hpet_detected = 1; + return 0; +} +#endif + /* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC off. Check for an Nvidia or VIA PCI bridge and turn it off. Use pci direct infrastructure because this runs before the PCI subsystem. @@ -317,11 +329,19 @@ void __init check_ioapic(void) return; case PCI_VENDOR_ID_NVIDIA: #ifdef CONFIG_ACPI - /* All timer overrides on Nvidia - seem to be wrong. Skip them. */ - acpi_skip_timer_override = 1; - printk(KERN_INFO - "Nvidia board detected. Ignoring ACPI timer override.\n"); + /* + * All timer overrides on Nvidia are + * wrong unless HPET is enabled. + */ + nvidia_hpet_detected = 0; + acpi_table_parse(ACPI_HPET, + nvidia_hpet_check); + if (nvidia_hpet_detected == 0) { + acpi_skip_timer_override = 1; + printk(KERN_INFO "Nvidia board " + "detected. Ignoring ACPI " + "timer override.\n"); + } #endif /* RED-PEN skip them on mptables too? */ return; @@ -1777,6 +1797,8 @@ static inline void unlock_ExtINT_logic(void) spin_unlock_irqrestore(&ioapic_lock, flags); } +int timer_uses_ioapic_pin_0; + /* * This code may look a bit paranoid, but it's supposed to cooperate with * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ @@ -1814,6 +1836,9 @@ static inline void check_timer(void) pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; + if (pin1 == 0) + timer_uses_ioapic_pin_0 = 1; + apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index accbff3fec49..fa1d19ca700a 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -53,7 +53,7 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* * returns non-zero if opcode modifies the interrupt flag. */ -static inline int is_IF_modifier(kprobe_opcode_t *insn) +static __always_inline int is_IF_modifier(kprobe_opcode_t *insn) { switch (*insn) { case 0xfa: /* cli */ @@ -84,7 +84,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) * If it does, return the address of the 32-bit displacement word. * If not, return null. */ -static inline s32 *is_riprel(u8 *insn) +static s32 __kprobes *is_riprel(u8 *insn) { #define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ @@ -229,7 +229,7 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) mutex_unlock(&kprobe_mutex); } -static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); kcb->prev_kprobe.status = kcb->kprobe_status; @@ -237,7 +237,7 @@ static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; } -static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; kcb->kprobe_status = kcb->prev_kprobe.status; @@ -245,7 +245,7 @@ static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, +static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { __get_cpu_var(current_kprobe) = p; @@ -514,13 +514,13 @@ static void __kprobes resume_execution(struct kprobe *p, *tos = orig_rip + (*tos - copy_rip); break; case 0xff: - if ((*insn & 0x30) == 0x10) { + if ((insn[1] & 0x30) == 0x10) { /* call absolute, indirect */ /* Fix return addr; rip is correct. */ next_rip = regs->rip; *tos = orig_rip + (*tos - copy_rip); - } else if (((*insn & 0x31) == 0x20) || /* jmp near, absolute indirect */ - ((*insn & 0x31) == 0x21)) { /* jmp far, absolute indirect */ + } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ + ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ /* rip is correct. */ next_rip = regs->rip; } diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 6f0790e8b6d3..c69fc43cee7b 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -629,7 +629,7 @@ static __cpuinit void mce_remove_device(unsigned int cpu) #endif /* Get notified when a cpu comes on/off. Be hotplug friendly. */ -static __cpuinit int +static int mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index d3ad7d81266d..d13b241ad094 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -482,7 +482,7 @@ static void threshold_remove_device(unsigned int cpu) #endif /* get notified when a cpu comes on/off */ -static __cpuinit int threshold_cpu_callback(struct notifier_block *nfb, +static int threshold_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { /* cpu was unsigned int to begin with */ diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index b17cf3eba359..083da7e606b1 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -968,7 +968,17 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) */ int irq = gsi; if (gsi < MAX_GSI_NUM) { - if (gsi > 15) + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0)) gsi = pci_irq++; /* * Don't assign IRQ used by ACPI SCI diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index af035ede70cd..a9275c9557cf 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -54,6 +54,10 @@ dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) else #endif node = numa_node_id(); + + if (node < first_node(node_online_map)) + node = first_node(node_online_map); + page = alloc_pages_node(node, gfp, order); return page ? page_address(page) : NULL; } diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index a6c01e121266..82a7c9bfdfa0 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -112,10 +112,6 @@ static unsigned long alloc_iommu(int size) static void free_iommu(unsigned long offset, int size) { unsigned long flags; - if (size == 1) { - clear_bit(offset, iommu_gart_bitmap); - return; - } spin_lock_irqsave(&iommu_bitmap_lock, flags); __clear_bit_string(iommu_gart_bitmap, offset, size); spin_unlock_irqrestore(&iommu_bitmap_lock, flags); @@ -635,14 +631,20 @@ static int __init pci_iommu_init(void) printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n"); if (end_pfn > MAX_DMA32_PFN) { printk(KERN_ERR "WARNING more than 4GB of memory " - "but IOMMU not compiled in.\n" - KERN_ERR "WARNING 32bit PCI may malfunction.\n" - KERN_ERR "You might want to enable " - "CONFIG_GART_IOMMU\n"); + "but IOMMU not available.\n" + KERN_ERR "WARNING 32bit PCI may malfunction.\n"); } return -1; } + i = 0; + for_all_nb(dev) + i++; + if (i > MAX_NB) { + printk(KERN_ERR "PCI-GART: Too many northbridges (%ld). Disabled\n", i); + return -1; + } + printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n"); aper_size = info.aper_size * 1024 * 1024; iommu_size = check_iommu_size(info.aper_base, aper_size); diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c index 44adcc2d5e5b..1f6ecc62061d 100644 --- a/arch/x86_64/kernel/pci-nommu.c +++ b/arch/x86_64/kernel/pci-nommu.c @@ -12,9 +12,10 @@ static int check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size) { if (hwdev && bus + size > *hwdev->dma_mask) { - printk(KERN_ERR - "nommu_%s: overflow %Lx+%lu of device mask %Lx\n", - name, (long long)bus, size, (long long)*hwdev->dma_mask); + if (*hwdev->dma_mask >= 0xffffffffULL) + printk(KERN_ERR + "nommu_%s: overflow %Lx+%lu of device mask %Lx\n", + name, (long long)bus, size, (long long)*hwdev->dma_mask); return 0; } return 1; diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c index b0444a415bd6..bf421ed26808 100644 --- a/arch/x86_64/kernel/pmtimer.c +++ b/arch/x86_64/kernel/pmtimer.c @@ -68,7 +68,7 @@ int pmtimer_mark_offset(void) offset_delay = delta % (USEC_PER_SEC / HZ); rdtscll(tsc); - vxtime.last_tsc = tsc - offset_delay * cpu_khz; + vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000; /* don't calculate delay for first run, or if we've got less then a tick */ diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 1c44b53cb15b..fb903e65e079 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -575,8 +575,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) prev->userrsp = read_pda(oldrsp); write_pda(oldrsp, next->userrsp); write_pda(pcurrent, next_p); + /* This must be here to ensure both math_state_restore() and - kernel_fpu_begin() work consistently. */ + kernel_fpu_begin() work consistently. + And the AMD workaround requires it to be after DS reload. */ unlazy_fpu(prev_p); write_pda(kernelstack, task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index da8e7903d817..2d50024c9f30 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -600,12 +600,12 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs) if (unlikely(current->audit_context)) { if (test_thread_flag(TIF_IA32)) { - audit_syscall_entry(current, AUDIT_ARCH_I386, + audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_rax, regs->rbx, regs->rcx, regs->rdx, regs->rsi); } else { - audit_syscall_entry(current, AUDIT_ARCH_X86_64, + audit_syscall_entry(AUDIT_ARCH_X86_64, regs->orig_rax, regs->rdi, regs->rsi, regs->rdx, regs->r10); @@ -616,7 +616,7 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs) asmlinkage void syscall_trace_leave(struct pt_regs *regs) { if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(regs->rax), regs->rax); + audit_syscall_exit(AUDITSC_RESULT(regs->rax), regs->rax); if ((test_thread_flag(TIF_SYSCALL_TRACE) || test_thread_flag(TIF_SINGLESTEP)) diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index c50b06765a80..655b9192eeb3 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -571,17 +571,28 @@ static inline void copy_edd(void) #endif #define EBDA_ADDR_POINTER 0x40E -static void __init reserve_ebda_region(void) + +unsigned __initdata ebda_addr; +unsigned __initdata ebda_size; + +static void discover_ebda(void) { - unsigned int addr; - /** + /* * there is a real-mode segmented pointer pointing to the * 4K EBDA area at 0x40E */ - addr = *(unsigned short *)phys_to_virt(EBDA_ADDR_POINTER); - addr <<= 4; - if (addr) - reserve_bootmem_generic(addr, PAGE_SIZE); + ebda_addr = *(unsigned short *)EBDA_ADDR_POINTER; + ebda_addr <<= 4; + + ebda_size = *(unsigned short *)(unsigned long)ebda_addr; + + /* Round EBDA up to pages */ + if (ebda_size == 0) + ebda_size = 1; + ebda_size <<= 10; + ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE); + if (ebda_size > 64*1024) + ebda_size = 64*1024; } void __init setup_arch(char **cmdline_p) @@ -627,6 +638,8 @@ void __init setup_arch(char **cmdline_p) check_efer(); + discover_ebda(); + init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); dmi_scan_machine(); @@ -669,7 +682,8 @@ void __init setup_arch(char **cmdline_p) reserve_bootmem_generic(0, PAGE_SIZE); /* reserve ebda region */ - reserve_ebda_region(); + if (ebda_addr) + reserve_bootmem_generic(ebda_addr, ebda_size); #ifdef CONFIG_SMP /* @@ -930,6 +944,10 @@ static int __init init_amd(struct cpuinfo_x86 *c) if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)) set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_bit(X86_FEATURE_FXSAVE_LEAK, &c->x86_capability); + r = get_model_name(c); if (!r) { switch (c->x86) { @@ -1033,7 +1051,7 @@ static void srat_detect_node(void) for now. */ node = apicid_to_node[hard_smp_processor_id()]; if (node == NUMA_NO_NODE) - node = 0; + node = first_node(node_online_map); numa_set_node(cpu, node); if (acpi_numa > 0) @@ -1422,3 +1440,22 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; +#ifdef CONFIG_INPUT_PCSPKR +#include <linux/platform_device.h> +static __init int add_pcspkr(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("pcspkr", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} +device_initcall(add_pcspkr); +#endif diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 6bda322d3caf..cea335e8746c 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/moduleparam.h> #include <linux/nmi.h> #include <linux/kprobes.h> +#include <linux/kexec.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -101,6 +102,8 @@ static inline void preempt_conditional_cli(struct pt_regs *regs) { if (regs->eflags & X86_EFLAGS_IF) local_irq_disable(); + /* Make sure to not schedule here because we could be running + on an exception stack. */ preempt_enable_no_resched(); } @@ -384,6 +387,7 @@ void out_of_line_bug(void) static DEFINE_SPINLOCK(die_lock); static int die_owner = -1; +static unsigned int die_nest_count; unsigned __kprobes long oops_begin(void) { @@ -398,6 +402,7 @@ unsigned __kprobes long oops_begin(void) else spin_lock(&die_lock); } + die_nest_count++; die_owner = cpu; console_verbose(); bust_spinlocks(1); @@ -408,7 +413,13 @@ void __kprobes oops_end(unsigned long flags) { die_owner = -1; bust_spinlocks(0); - spin_unlock_irqrestore(&die_lock, flags); + die_nest_count--; + if (die_nest_count) + /* We still own the lock */ + local_irq_restore(flags); + else + /* Nest count reaches zero, release the lock. */ + spin_unlock_irqrestore(&die_lock, flags); if (panic_on_oops) panic("Oops"); } @@ -433,6 +444,8 @@ void __kprobes __die(const char * str, struct pt_regs * regs, long err) printk(KERN_ALERT "RIP "); printk_address(regs->rip); printk(" RSP <%016lx>\n", regs->rsp); + if (kexec_should_crash(current)) + crash_kexec(regs); } void die(const char * str, struct pt_regs * regs, long err) @@ -455,10 +468,14 @@ void __kprobes die_nmi(char *str, struct pt_regs *regs) */ printk(str, safe_smp_processor_id()); show_registers(regs); + if (kexec_should_crash(current)) + crash_kexec(regs); if (panic_on_timeout || panic_on_oops) panic("nmi watchdog"); printk("console shuts up ...\n"); oops_end(flags); + nmi_exit(); + local_irq_enable(); do_exit(SIGSEGV); } @@ -468,8 +485,6 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, { struct task_struct *tsk = current; - conditional_sti(regs); - tsk->thread.error_code = error_code; tsk->thread.trap_no = trapnr; @@ -506,6 +521,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ == NOTIFY_STOP) \ return; \ + conditional_sti(regs); \ do_trap(trapnr, signr, str, regs, error_code, NULL); \ } @@ -520,6 +536,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ == NOTIFY_STOP) \ return; \ + conditional_sti(regs); \ do_trap(trapnr, signr, str, regs, error_code, &info); \ } @@ -533,7 +550,17 @@ DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) DO_ERROR(18, SIGSEGV, "reserved", reserved) -DO_ERROR(12, SIGBUS, "stack segment", stack_segment) + +/* Runs on IST stack */ +asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) +{ + if (notify_die(DIE_TRAP, "stack segment", regs, error_code, + 12, SIGBUS) == NOTIFY_STOP) + return; + preempt_conditional_sti(regs); + do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL); + preempt_conditional_cli(regs); +} asmlinkage void do_double_fault(struct pt_regs * regs, long error_code) { @@ -667,8 +694,9 @@ asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) { return; } + preempt_conditional_sti(regs); do_trap(3, SIGTRAP, "int3", regs, error_code, NULL); - return; + preempt_conditional_cli(regs); } /* Help handler running on IST stack to switch back to user stack diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index cc02573a3271..b2fac14baac0 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -188,11 +188,13 @@ void __init setup_node_zones(int nodeid) memory. */ memmapsize = sizeof(struct page) * (end_pfn-start_pfn); limit = end_pfn << PAGE_SHIFT; +#ifdef CONFIG_FLAT_NODE_MEM_MAP NODE_DATA(nodeid)->node_mem_map = __alloc_bootmem_core(NODE_DATA(nodeid)->bdata, memmapsize, SMP_CACHE_BYTES, round_down(limit - memmapsize, PAGE_SIZE), limit); +#endif size_zones(zones, holes, start_pfn, end_pfn); free_area_init_node(nodeid, NODE_DATA(nodeid), zones, diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 15ae9fcd65a7..474df22c6ed2 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -34,7 +34,10 @@ static nodemask_t nodes_found __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES] __initdata; static int found_add_area __initdata; -int hotadd_percent __initdata = 10; +int hotadd_percent __initdata = 0; +#ifndef RESERVE_HOTADD +#define hotadd_percent 0 /* Ignore all settings */ +#endif static u8 pxm2node[256] = { [0 ... 255] = 0xff }; /* Too small nodes confuse the VM badly. Usually they result @@ -103,6 +106,7 @@ static __init void bad_srat(void) int i; printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; + found_add_area = 0; for (i = 0; i < MAX_LOCAL_APIC; i++) apicid_to_node[i] = NUMA_NO_NODE; for (i = 0; i < MAX_NUMNODES; i++) @@ -154,7 +158,8 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) int pxm, node; if (srat_disabled()) return; - if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) { bad_srat(); + if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) { + bad_srat(); return; } if (pa->flags.enabled == 0) @@ -191,15 +196,17 @@ static int hotadd_enough_memory(struct bootnode *nd) allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE; allowed = (allowed / 100) * hotadd_percent; if (allocated + mem > allowed) { + unsigned long range; /* Give them at least part of their hotadd memory upto hotadd_percent It would be better to spread the limit out over multiple hotplug areas, but that is too complicated right now */ if (allocated >= allowed) return 0; - pages = (allowed - allocated + mem) / sizeof(struct page); + range = allowed - allocated; + pages = (range / PAGE_SIZE); mem = pages * sizeof(struct page); - nd->end = nd->start + pages*PAGE_SIZE; + nd->end = nd->start + range; } /* Not completely fool proof, but a good sanity check */ addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem); @@ -392,8 +399,10 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) /* First clean up the node list */ for (i = 0; i < MAX_NUMNODES; i++) { cutoff_node(i, start, end); - if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) + if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) { unparse_node(i); + node_set_offline(i); + } } if (acpi_numa <= 0) |