diff options
Diffstat (limited to 'arch')
24 files changed, 111 insertions, 50 deletions
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 1bec96e85196..42ff90b46dfb 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -352,3 +352,4 @@ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(nr, &it8152_ops, sys); } +EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 24498a932ba6..a54b3db80366 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -513,4 +513,4 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); - +EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index fa2e5bffbb8e..6983cb4d4cae 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -28,9 +28,16 @@ config S3C2412_DMA config S3C2412_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2412 power management +config S3C2412_PM_SLEEP + bool + help + Internal config node to apply sleep for S3C2412 power management. + Can be selected by another SoCs with similar sleep procedure. + # Note, the S3C2412 IOtiming support is in plat-s3c24xx config S3C2412_CPUFREQ diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 530ec46cbaea..6c48a91ea39e 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o +obj-$(CONFIG_S3C2412_PM) += pm.o +obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o # Machine support diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 27b3e7c9d613..df8d14974c90 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -27,6 +27,7 @@ config S3C2416_DMA config S3C2416_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2416 power management diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 28677caf3613..461aa035afc0 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = { static struct max8998_platform_data aquila_max8998_pdata = { .num_regulators = ARRAY_SIZE(aquila_regulators), .regulators = aquila_regulators, + .buck1_set1 = S5PV210_GPH0(3), + .buck1_set2 = S5PV210_GPH0(4), + .buck2_set3 = S5PV210_GPH0(5), + .buck1_max_voltage1 = 1200000, + .buck1_max_voltage2 = 1200000, + .buck2_max_voltage = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b1dcf964a768..e22d5112fd44 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = { static struct max8998_platform_data goni_max8998_pdata = { .num_regulators = ARRAY_SIZE(goni_regulators), .regulators = goni_regulators, + .buck1_set1 = S5PV210_GPH0(3), + .buck1_set2 = S5PV210_GPH0(4), + .buck2_set3 = S5PV210_GPH0(5), + .buck1_max_voltage1 = 1200000, + .buck1_max_voltage2 = 1200000, + .buck2_max_voltage = 1200000, }; #endif diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index a285d13c7416..f428c4db2b60 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -1,4 +1,5 @@ /* + * Copyright (C) 2010 Magnus Damm * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify @@ -14,24 +15,45 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <mach/hardware.h> #include <mach/irqs.h> +#define INTCA_BASE 0xe6980000 +#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */ +#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */ +#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */ +#define INTLVLB_OFFS 0x00000034 /* previous priority level */ + .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =INTFLGA + ldr \base, =INTCA_BASE .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base] + /* The single INTFLGA read access below results in the following: + * + * 1. INTLVLB is updated with old priority value from INTLVLA + * 2. Highest priority interrupt is accepted + * 3. INTLVLA is updated to contain priority of accepted interrupt + * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA + */ + ldr \irqnr, [\base, #INTFLGA_OFFS] + + /* Restore INTLVLA with the value saved in INTLVLB. + * This is required to support interrupt priorities properly. + */ + ldrb \tmp, [\base, #INTLVLB_OFFS] + strb \tmp, [\base, #INTLVLA_OFFS] + + /* Handle invalid vector number case */ cmp \irqnr, #0 beq 1000f - /* intevt to irq number */ + + /* Convert vector to irq number, same as the evt2irq() macro */ lsr \irqnr, \irqnr, #0x5 subs \irqnr, \irqnr, #16 diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h index 4aecf6e3a859..2b8fd8b942fe 100644 --- a/arch/arm/mach-shmobile/include/mach/vmalloc.h +++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h @@ -2,6 +2,6 @@ #define __ASM_MACH_VMALLOC_H /* Vmalloc at ... - 0xe5ffffff */ -#define VMALLOC_END 0xe6000000 +#define VMALLOC_END 0xe6000000UL #endif /* __ASM_MACH_VMALLOC_H */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5a27b1b538f2..eb105e61c746 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -8,7 +8,7 @@ config PLAT_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB - select S3C_DEVICE_NAND + select S3C_DEV_NAND select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index f860a340acc9..75da468090b9 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -40,21 +40,17 @@ unsigned long long sched_clock(void) unsigned long long ll; unsigned l[2]; } tsc64, result; - unsigned long tsc, tmp; + unsigned long tmp; unsigned product[3]; /* 96-bit intermediate value */ /* cnt32_to_63() is not safe with preemption */ preempt_disable(); - /* read the TSC value - */ - tsc = get_cycles(); - - /* expand to 64-bits. + /* expand the tsc to 64-bits. * - sched_clock() must be called once a minute or better or the * following will go horribly wrong - see cnt32_to_63() */ - tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; + tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL; preempt_enable(); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index fea833e18ad5..e0d703c7fdf7 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -63,6 +63,7 @@ #include <linux/of_gpio.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/fs.h> #include <linux/watchdog.h> #include <linux/miscdevice.h> #include <linux/uaccess.h> diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index d961949600fd..9070d7e60704 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -140,7 +140,7 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */ + __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */ /* FPGA System register setup*/ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c index b26264dc2aef..c509c40cba4b 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c @@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12}; static void master_clk_init(struct clk *clk) { - return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; + clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; } static struct clk_ops sh7201_master_clk_ops = { diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index b601fa3978d1..6282a839e08e 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -81,8 +81,7 @@ static void shoc_clk_init(struct clk *clk) for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) { int divisor = frqcr3_divisors[i]; - if (clk->ops->set_rate(clk, clk->parent->rate / - divisor, 0) == 0) + if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0) break; } diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 23f315c9f215..325c05294fc4 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -355,7 +355,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, if (heap > 0x3fffffffffffUL) error("Destination address too large"); #else - if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff)) + if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); #endif #ifndef CONFIG_RELOCATABLE diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3f838d537392..78218135b48e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1389,6 +1389,14 @@ void __cpuinit end_local_APIC_setup(void) setup_apic_nmi_watchdog(NULL); apic_pm_activate(); + + /* + * Now that local APIC setup is completed for BP, configure the fault + * handling for interrupt remapping. + */ + if (!smp_processor_id() && intr_remapping_enabled) + enable_drhd_fault_handling(); + } #ifdef CONFIG_X86_X2APIC diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7cc0a721f628..fadcd743a74f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2430,13 +2430,12 @@ static void ack_apic_level(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; int i, do_unmask_irq = 0, irq = data->irq; - struct irq_desc *desc = irq_to_desc(irq); unsigned long v; irq_complete_move(cfg); #ifdef CONFIG_GENERIC_PENDING_IRQ /* If we are moving the irq we need to mask it */ - if (unlikely(desc->status & IRQ_MOVE_PENDING)) { + if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) { do_unmask_irq = 1; mask_ioapic(cfg); } @@ -3413,6 +3412,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, msg.data |= MSI_DATA_VECTOR(cfg->vector); msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; msg.address_lo |= MSI_ADDR_DEST_ID(dest); + msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest); dmar_msi_write(irq, &msg); diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index f9e4e6a54073..d8c4a6feb286 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void) /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; } - - /* - * Now that apic routing model is selected, configure the - * fault handling for intr remapping. - */ - if (intr_remapping_enabled) - enable_drhd_fault_handling(); } /* Same for both flat and physical. */ diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index f0bea76f6ea5..c0dbd9ac24f0 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -60,16 +60,18 @@ #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD) #endif +/* Number of possible pages in the lowmem region */ +LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) + /* Enough space to fit pagetables for the low memory linear map */ -MAPPING_BEYOND_END = \ - PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT +MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT /* * Worst-case size of the kernel mapping we need to make: - * the worst-case size of the kernel itself, plus the extra we need - * to map for the linear map. + * a relocatable kernel can live anywhere in lowmem, so we need to be able + * to map all of lowmem. */ -KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT +KERNEL_PAGES = LOWMEM_PAGES INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm RESERVE_BRK(pagetables, INIT_MAP_SIZE) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ae03cab4352e..4ff5968f12d2 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -27,6 +27,9 @@ #define HPET_DEV_FSB_CAP 0x1000 #define HPET_DEV_PERI_CAP 0x2000 +#define HPET_MIN_CYCLES 128 +#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1)) + #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt) /* @@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void) /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - /* 5 usec minimum reprogramming delta. */ - hpet_clockevent.min_delta_ns = 5000; + /* Setup minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, + &hpet_clockevent); /* * Start hpet with the boot cpu mask and make it @@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta, * the wraparound into account) nor a simple count down event * mode. Further the write to the comparator register is * delayed internally up to two HPET clock cycles in certain - * chipsets (ATI, ICH9,10). We worked around that by reading - * back the compare register, but that required another - * workaround for ICH9,10 chips where the first readout after - * write can return the old stale value. We already have a - * minimum delta of 5us enforced, but a NMI or SMI hitting + * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even + * longer delays. We worked around that by reading back the + * compare register, but that required another workaround for + * ICH9,10 chips where the first readout after write can + * return the old stale value. We already had a minimum + * programming delta of 5us enforced, but a NMI or SMI hitting * between the counter readout and the comparator write can * move us behind that point easily. Now instead of reading * the compare register back several times, we make the ETIME * decision based on the following: Return ETIME if the - * counter value after the write is less than 8 HPET cycles + * counter value after the write is less than HPET_MIN_CYCLES * away from the event or if the counter is already ahead of - * the event. + * the event. The minimum programming delta for the generic + * clockevents code is set to 1.5 * HPET_MIN_CYCLES. */ res = (s32)(cnt - hpet_readl(HPET_COUNTER)); - return res < 8 ? -ETIME : 0; + return res < HPET_MIN_CYCLES ? -ETIME : 0; } static void hpet_legacy_set_mode(enum clock_event_mode mode, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 85268f8eadf6..a0f52af256a0 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -501,7 +501,18 @@ static inline unsigned long long get_total_mem(void) return total << PAGE_SHIFT; } -#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF +/* + * Keep the crash kernel below this limit. On 32 bits earlier kernels + * would limit the kernel to the low 512 MiB due to mapping restrictions. + * On 64 bits, kexec-tools currently limits us to 896 MiB; increase this + * limit once kexec-tools are fixed. + */ +#ifdef CONFIG_X86_32 +# define CRASH_KERNEL_ADDR_MAX (512 << 20) +#else +# define CRASH_KERNEL_ADDR_MAX (896 << 20) +#endif + static void __init reserve_crashkernel(void) { unsigned long long total_mem; @@ -520,10 +531,10 @@ static void __init reserve_crashkernel(void) const unsigned long long alignment = 16<<20; /* 16M */ /* - * kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX + * kexec want bzImage is below CRASH_KERNEL_ADDR_MAX */ crash_base = memblock_find_in_range(alignment, - DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment); + CRASH_KERNEL_ADDR_MAX, crash_size, alignment); if (crash_base == MEMBLOCK_ERROR) { pr_info("crashkernel reservation failed - No suitable area found.\n"); diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 9c253bd65e24..547128546cc3 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -394,7 +394,8 @@ static void __init setup_xstate_init(void) * Setup init_xstate_buf to represent the init state of * all the features managed by the xsave */ - init_xstate_buf = alloc_bootmem(xstate_size); + init_xstate_buf = alloc_bootmem_align(xstate_size, + __alignof__(struct xsave_struct)); init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; clts(); diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index 4a2afa1bac51..b6552b189bcd 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -25,7 +25,7 @@ targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y) export CPPFLAGS_vdso.lds += -P -C -VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \ +VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \ -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 $(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so @@ -69,7 +69,7 @@ vdso32.so-$(VDSO32-y) += sysenter vdso32-images = $(vdso32.so-y:%=vdso32-%.so) CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds) -VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1 +VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1 # This makes sure the $(obj) subdirectory exists even though vdso32/ # is not a kbuild sub-make subdirectory. |