diff options
Diffstat (limited to 'arch')
488 files changed, 23999 insertions, 11802 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 79c6e5a24456..2a85dc33907c 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -327,6 +327,9 @@ config PCI_DOMAINS bool default y +config PCI_SYSCALL + def_bool PCI + config ALPHA_CORE_AGP bool depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index 28c84e55feb9..6b07f89a72c7 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -207,6 +207,10 @@ iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n) p[i] = 0; } +/* True if the machine supports DAC addressing, and DEV can + make use of it given MASK. */ +static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask); + /* Map a single buffer of the indicated size for PCI DMA in streaming mode. The 32-bit PCI bus mastering address to use is returned. Once the device is given the dma address, the device owns this memory @@ -897,7 +901,7 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count) /* True if the machine supports DAC addressing, and DEV can make use of it given MASK. */ -int +static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask) { dma64_addr_t dac_offset = alpha_mv.pci_dac_offset; @@ -917,32 +921,6 @@ pci_dac_dma_supported(struct pci_dev *dev, u64 mask) return ok; } -EXPORT_SYMBOL(pci_dac_dma_supported); - -dma64_addr_t -pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, - unsigned long offset, int direction) -{ - return (alpha_mv.pci_dac_offset - + __pa(page_address(page)) - + (dma64_addr_t) offset); -} -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page * -pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr) -{ - unsigned long paddr = (dma_addr & PAGE_MASK) - alpha_mv.pci_dac_offset; - return virt_to_page(__va(paddr)); -} -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long -pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr) -{ - return (dma_addr & ~PAGE_MASK); -} -EXPORT_SYMBOL(pci_dac_dma_to_offset); /* Helper for generic DMA-mapping functions. */ diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 930cedc8be24..783f4e50c111 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -289,7 +289,7 @@ srm_console_device(struct console *co, int *index) return srmcons_driver; } -static int __init +static int srm_console_setup(struct console *co, char *options) { return 0; diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index 0bcb968cb60a..922143ea1cdb 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -420,7 +420,7 @@ marvel_init_pci(void) io7_clear_errors(io7); } -static void +static void __init marvel_init_rtc(void) { init_rtc_irq(); diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index 4748e14a28bc..1dd50d07693c 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -144,7 +144,7 @@ irqreturn_t timer_interrupt(int irq, void *dev) return IRQ_HANDLED; } -void +void __init common_init_rtc(void) { unsigned char x; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 50d9f3e4e0f1..a44c6da9bf83 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -241,6 +241,9 @@ config ARCH_H720X config ARCH_IMX bool "IMX" + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS help Support for Motorola's i.MX family of processors (MX1, MXL). @@ -308,6 +311,7 @@ config ARCH_L7200 config ARCH_KS8695 bool "Micrel/Kendin KS8695" + select GENERIC_GPIO help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -384,6 +388,7 @@ config ARCH_DAVINCI bool "TI DaVinci" select GENERIC_TIME select GENERIC_CLOCKEVENTS + select GENERIC_GPIO help Support for TI's DaVinci platform. @@ -531,6 +536,9 @@ config PCI information about which PCI hardware does work under Linux and which doesn't. +config PCI_SYSCALL + def_bool PCI + # Select the host bridge type config PCI_HOST_VIA82C505 bool @@ -1034,6 +1042,8 @@ source "drivers/mmc/Kconfig" source "drivers/rtc/Kconfig" +source "drivers/dma/Kconfig" + endmenu source "fs/Kconfig" diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index aefee20cbf98..b15f927a5926 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1 +1,2 @@ piggy.gz +font.c diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index adddc7131685..a1f1691b67fe 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,15 +6,13 @@ HEAD = head.o OBJS = misc.o -FONTC = drivers/video/console/font_acorn_8x8.c - -FONT = $(addprefix ../../../../drivers/video/console/, font_acorn_8x8.o) +FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c # # Architecture dependencies # ifeq ($(CONFIG_ARCH_ACORN),y) -OBJS += ll_char_wr.o $(FONT) +OBJS += ll_char_wr.o font.o endif ifeq ($(CONFIG_ARCH_SHARK),y) @@ -73,7 +71,7 @@ endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ -targets := vmlinux vmlinux.lds piggy.gz piggy.o $(FONT) \ +targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ head.o misc.o $(OBJS) EXTRA_CFLAGS := -fpic EXTRA_AFLAGS := @@ -105,7 +103,10 @@ $(obj)/piggy.gz: $(obj)/../Image FORCE $(obj)/piggy.o: $(obj)/piggy.gz FORCE -CFLAGS_font_acorn_8x8.o := -Dstatic= +CFLAGS_font.o := -Dstatic= + +$(obj)/font.c: $(FONTC) + $(call cmd,shipped) $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config @sed "$(SEDFLAGS)" < $< > $@ diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 73c5d9e0201c..236bbe578312 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -41,11 +41,6 @@ __XScale_start: mov r7, #MACH_TYPE_COTULLA_IDP #endif -#ifdef CONFIG_MACH_GTWX5715 - mov r7, #(MACH_TYPE_GTWX5715 & 0xff) - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) -#endif - #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 680ea6ed77b8..d7fb5ee1637e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -436,6 +436,28 @@ __armv4_mmu_cache_on: mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs mov pc, r12 +__armv7_mmu_cache_on: + mov r12, lr + mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0 + tst r11, #0xf @ VMSA + blne __setup_mmu + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + tst r11, #0xf @ VMSA + mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs + mrc p15, 0, r0, c1, c0, 0 @ read control reg + orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement + orr r0, r0, #0x003c @ write buffer + orrne r0, r0, #1 @ MMU enabled + movne r1, #-1 + mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer + mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcr p15, 0, r0, c1, c0, 0 @ load control register + mrc p15, 0, r0, c1, c0, 0 @ and read it back + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ ISB + mov pc, r12 + __arm6_mmu_cache_on: mov r12, lr bl __setup_mmu @@ -622,11 +644,17 @@ proc_types: b __armv4_mmu_cache_flush .word 0x0007b000 @ ARMv6 - .word 0x0007f000 + .word 0x000ff000 b __armv4_mmu_cache_on b __armv4_mmu_cache_off b __armv6_mmu_cache_flush + .word 0x000f0000 @ new CPU Id + .word 0x000f0000 + b __armv7_mmu_cache_on + b __armv7_mmu_cache_off + b __armv7_mmu_cache_flush + .word 0 @ unrecognised type .word 0 mov pc, lr @@ -674,6 +702,16 @@ __armv4_mmu_cache_off: mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4 mov pc, lr +__armv7_mmu_cache_off: + mrc p15, 0, r0, c1, c0 + bic r0, r0, #0x000d + mcr p15, 0, r0, c1, c0 @ turn MMU and cache off + mov r12, lr + bl __armv7_mmu_cache_flush + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB + mov pc, r12 + __arm6_mmu_cache_off: mov r0, #0x00000030 @ ARM6 control reg. b __armv3_mmu_cache_off @@ -730,6 +768,59 @@ __armv6_mmu_cache_flush: mcr p15, 0, r1, c7, c10, 4 @ drain WB mov pc, lr +__armv7_mmu_cache_flush: + mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1 + tst r10, #0xf << 16 @ hierarchical cache (ARMv7) + beq hierarchical + mov r10, #0 + mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D + b iflush +hierarchical: + stmfd sp!, {r0-r5, r7, r9-r11} + mrc p15, 1, r0, c0, c0, 1 @ read clidr + ands r3, r0, #0x7000000 @ extract loc from clidr + mov r3, r3, lsr #23 @ left align loc bit field + beq finished @ if loc is 0, then no need to clean + mov r10, #0 @ start clean at cache level 0 +loop1: + add r2, r10, r10, lsr #1 @ work out 3x current cache level + mov r1, r0, lsr r2 @ extract cache type bits from clidr + and r1, r1, #7 @ mask of the bits for current cache only + cmp r1, #2 @ see what cache we have at this level + blt skip @ skip if no cache, or just i-cache + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + and r2, r1, #7 @ extract the length of the cache lines + add r2, r2, #4 @ add 4 (line length offset) + ldr r4, =0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the way size + .word 0xe16f5f14 @ clz r5, r4 - find bit position of way size increment + ldr r7, =0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop2: + mov r9, r4 @ create working copy of max way size +loop3: + orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 + orr r11, r11, r7, lsl r2 @ factor index number into r11 + mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way + subs r9, r9, #1 @ decrement the way + bge loop3 + subs r7, r7, #1 @ decrement the index + bge loop2 +skip: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt loop1 +finished: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + ldmfd sp!, {r0-r5, r7, r9-r11} +iflush: + mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB + mcr p15, 0, r10, c7, c10, 4 @ drain WB + mov pc, lr + __armv4_mmu_cache_flush: mov r2, #64*1024 @ default: 32K dcache size (*2) mov r11, #32 @ default: 32 byte line size diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index cfe6f4650bc9..ae21755872ed 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -60,6 +60,9 @@ struct locomo { unsigned int irq; spinlock_t lock; void __iomem *base; +#ifdef CONFIG_PM + void *saved_state; +#endif }; struct locomo_dev_info { @@ -565,7 +568,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) if (!save) return -ENOMEM; - dev->dev.power.saved_state = (void *) save; + lchip->saved_state = save; spin_lock_irqsave(&lchip->lock, flags); @@ -605,8 +608,8 @@ static int locomo_resume(struct platform_device *dev) struct locomo_save_data *save; unsigned long r; unsigned long flags; - - save = (struct locomo_save_data *) dev->dev.power.saved_state; + + save = lchip->saved_state; if (!save) return 0; @@ -628,6 +631,8 @@ static int locomo_resume(struct platform_device *dev) locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); spin_unlock_irqrestore(&lchip->lock, flags); + + lchip->saved_state = NULL; kfree(save); return 0; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 798bbfccafb7..eb06d0b2cb74 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -51,6 +51,9 @@ struct sa1111 { int irq; spinlock_t lock; void __iomem *base; +#ifdef CONFIG_PM + void *saved_state; +#endif }; /* @@ -822,7 +825,7 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; - dev->dev.power.saved_state = save; + sachip->saved_state = save; spin_lock_irqsave(&sachip->lock, flags); @@ -878,7 +881,7 @@ static int sa1111_resume(struct platform_device *dev) unsigned long flags, id; void __iomem *base; - save = (struct sa1111_save_data *)dev->dev.power.saved_state; + save = sachip->saved_state; if (!save) return 0; @@ -923,7 +926,7 @@ static int sa1111_resume(struct platform_device *dev) spin_unlock_irqrestore(&sachip->lock, flags); - dev->dev.power.saved_state = NULL; + sachip->saved_state = NULL; kfree(save); return 0; @@ -958,8 +961,8 @@ static int sa1111_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); #ifdef CONFIG_PM - kfree(pdev->dev.power.saved_state); - pdev->dev.power.saved_state = NULL; + kfree(sachip->saved_state); + sachip->saved_state = NULL; #endif } diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 3bf3a927ae22..111a7fa5debe 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -766,9 +766,7 @@ static void sharpsl_apm_get_power_status(struct apm_power_info *info) } static struct pm_ops sharpsl_pm_ops = { - .prepare = pxa_pm_prepare, .enter = corgi_pxa_pm_enter, - .finish = pxa_pm_finish, .valid = pm_valid_only_mem, }; diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index a52da0ddb43d..024a9cf469b4 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -20,7 +20,8 @@ __switch_data: .long _end @ r7 .long processor_id @ r4 .long __machine_arch_type @ r5 - .long cr_alignment @ r6 + .long __atags_pointer @ r6 + .long cr_alignment @ r7 .long init_thread_union + THREAD_START_SP @ sp /* @@ -29,6 +30,7 @@ __switch_data: * * r0 = cp#15 control register * r1 = machine ID + * r2 = atags pointer * r9 = processor ID */ .type __mmap_switched, %function @@ -47,11 +49,12 @@ __mmap_switched: strcc fp, [r6],#4 bcc 1b - ldmia r3, {r4, r5, r6, sp} + ldmia r3, {r4, r5, r6, r7, sp} str r9, [r4] @ Save processor ID str r1, [r5] @ Save machine type + str r2, [r6] @ Save atags pointer bic r4, r0, #CR_A @ Clear 'A' bit - stmia r6, {r0, r4} @ Save control register values + stmia r7, {r0, r4} @ Save control register values b start_kernel /* @@ -215,3 +218,34 @@ ENTRY(lookup_machine_type) bl __lookup_machine_type mov r0, r5 ldmfd sp!, {r4 - r6, pc} + +/* Determine validity of the r2 atags pointer. The heuristic requires + * that the pointer be aligned, in the first 16k of physical RAM and + * that the ATAG_CORE marker is first and present. Future revisions + * of this function may be more lenient with the physical address and + * may also be able to move the ATAGS block if necessary. + * + * r8 = machinfo + * + * Returns: + * r2 either valid atags pointer, or zero + * r5, r6 corrupted + */ + + .type __vet_atags, %function +__vet_atags: + tst r2, #0x3 @ aligned? + bne 1f + + ldr r5, [r2, #0] @ is first tag ATAG_CORE? + subs r5, r5, #ATAG_CORE_SIZE + bne 1f + ldr r5, [r2, #4] + ldr r6, =ATAG_CORE + cmp r5, r6 + bne 1f + + mov pc, lr @ atag pointer is ok + +1: mov r2, #0 + mov pc, lr diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 41f98b4ba2ee..7898cbc9861a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -29,6 +29,10 @@ #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) #define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) +#define ATAG_CORE 0x54410001 +#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) + + /* * swapper_pg_dir is the virtual address of the initial page table. * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must @@ -61,7 +65,7 @@ * * This is normally called from the decompressor code. The requirements * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, - * r1 = machine nr. + * r1 = machine nr, r2 = atags pointer. * * This code is mostly position independent, so if you link the kernel at * 0xc0008000, you call this at __pa(0xc0008000). @@ -85,6 +89,7 @@ ENTRY(stext) bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' + bl __vet_atags bl __create_page_tables /* diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 842361777d4e..93b7f8e22dcc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -44,6 +44,10 @@ static const char *processor_modes[] = { "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32" }; +static const char *isa_modes[] = { + "ARM" , "Thumb" , "Jazelle", "ThumbEE" +}; + extern void setup_mm_for_reboot(char mode); static volatile int hlt_counter; @@ -230,11 +234,11 @@ void __show_regs(struct pt_regs *regs) buf[3] = flags & PSR_V_BIT ? 'V' : 'v'; buf[4] = '\0'; - printk("Flags: %s IRQs o%s FIQs o%s Mode %s%s Segment %s\n", + printk("Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s\n", buf, interrupts_enabled(regs) ? "n" : "ff", fast_interrupts_enabled(regs) ? "n" : "ff", processor_modes[processor_mode(regs)], - thumb_mode(regs) ? " (T)" : "", + isa_modes[isa_mode(regs)], get_fs() == get_ds() ? "kernel" : "user"); #ifdef CONFIG_CPU_CP15 { diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 650eac1bc0a6..5be2e987b843 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -63,6 +63,8 @@ unsigned int processor_id; unsigned int __machine_arch_type; EXPORT_SYMBOL(__machine_arch_type); +unsigned int __atags_pointer __initdata; + unsigned int system_rev; EXPORT_SYMBOL(system_rev); @@ -780,7 +782,9 @@ void __init setup_arch(char **cmdline_p) if (mdesc->soft_reboot) reboot_setup("s"); - if (mdesc->boot_params) + if (__atags_pointer) + tags = phys_to_virt(__atags_pointer); + else if (mdesc->boot_params) tags = phys_to_virt(mdesc->boot_params); /* diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 26ca8ab3f62a..42e172cb0f49 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -27,6 +27,11 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/dm9000.h> +#include <linux/fb.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> + +#include <video/atmel_lcdc.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -271,6 +276,127 @@ static struct spi_board_info ek_spi_devices[] = { }; +/* + * LCD Controller + */ +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static struct fb_videomode at91_tft_vga_modes[] = { + { + .name = "TX09D50VM1CCA @ 60", + .refresh = 60, + .xres = 240, .yres = 320, + .pixclock = KHZ2PICOS(4965), + + .left_margin = 1, .right_margin = 33, + .upper_margin = 1, .lower_margin = 0, + .hsync_len = 5, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_monspecs = { + .manufacturer = "HIT", + .monitor = "TX09D50VM1CCA", + + .modedb = at91_tft_vga_modes, + .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_TFT \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) + +static void at91_lcdc_power_control(int on) +{ + if (on) + at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ + else + at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ +} + +/* Driver datas */ +static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, + .default_monspecs = &at91fb_default_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_power_control, + .guard_time = 1, +}; + +#else +static struct atmel_lcdfb_info __initdata ek_lcdc_data; +#endif + + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PA27, + .keycode = BTN_0, + .desc = "Button 0", + .active_low = 1, + }, + { + .gpio = AT91_PIN_PA26, + .keycode = BTN_1, + .desc = "Button 1", + .active_low = 1, + }, + { + .gpio = AT91_PIN_PA25, + .keycode = BTN_2, + .desc = "Button 2", + .active_low = 1, + }, + { + .gpio = AT91_PIN_PA24, + .keycode = BTN_3, + .desc = "Button 3", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PB27, 0); /* btn0 */ + at91_set_deglitch(AT91_PIN_PB27, 1); + at91_set_gpio_input(AT91_PIN_PB26, 0); /* btn1 */ + at91_set_deglitch(AT91_PIN_PB26, 1); + at91_set_gpio_input(AT91_PIN_PB25, 0); /* btn2 */ + at91_set_deglitch(AT91_PIN_PB25, 1); + at91_set_gpio_input(AT91_PIN_PB24, 0); /* btn3 */ + at91_set_deglitch(AT91_PIN_PB24, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + static void __init ek_board_init(void) { /* Serial */ @@ -296,6 +422,10 @@ static void __init ek_board_init(void) /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); #endif + /* LCD Controller */ + at91_add_device_lcdc(&ek_lcdc_data); + /* Push Buttons */ + ek_add_device_buttons(); } MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index c164c8e58ae6..2a1cc73390b7 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -26,6 +26,9 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/fb.h> + +#include <video/atmel_lcdc.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -202,6 +205,65 @@ static struct at91_nand_data __initdata ek_nand_data = { /* + * LCD Controller + */ +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static struct fb_videomode at91_tft_vga_modes[] = { + { + .name = "TX09D50VM1CCA @ 60", + .refresh = 60, + .xres = 240, .yres = 320, + .pixclock = KHZ2PICOS(4965), + + .left_margin = 1, .right_margin = 33, + .upper_margin = 1, .lower_margin = 0, + .hsync_len = 5, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_monspecs = { + .manufacturer = "HIT", + .monitor = "TX09D70VM1CCA", + + .modedb = at91_tft_vga_modes, + .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_TFT \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) + +static void at91_lcdc_power_control(int on) +{ + if (on) + at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */ + else + at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */ +} + +/* Driver datas */ +static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, + .default_monspecs = &at91fb_default_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_power_control, + .guard_time = 1, +}; + +#else +static struct atmel_lcdfb_info __initdata ek_lcdc_data; +#endif + + +/* * AC97 */ static struct atmel_ac97_data ek_ac97_data = { @@ -230,6 +292,8 @@ static void __init ek_board_init(void) at91_add_device_nand(&ek_nand_data); /* I2C */ at91_add_device_i2c(); + /* LCD Controller */ + at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); } diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index a8f88cd29905..99ac2e55774d 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,7 +4,8 @@ # # Common objects -obj-y := time.o irq.o serial.o io.o id.o psc.o +obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ + gpio.o mux.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 633c12e43044..9e4024c4965f 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -32,6 +32,7 @@ void __init davinci_psc_init(void); void __init davinci_irq_init(void); void __init davinci_map_common_io(void); +void __init davinci_init_common_hw(void); /* NOR Flash base address set to CS0 by default */ #define NOR_FLASH_PHYS 0x02000000 @@ -116,6 +117,7 @@ static __init void davinci_evm_init(void) static __init void davinci_evm_irq_init(void) { + davinci_init_common_hw(); davinci_irq_init(); } diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c new file mode 100644 index 000000000000..139ceaa35e24 --- /dev/null +++ b/arch/arm/mach-davinci/clock.c @@ -0,0 +1,323 @@ +/* + * TI DaVinci clock config file + * + * Copyright (C) 2006 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/psc.h> +#include "clock.h" + +/* PLL/Reset register offsets */ +#define PLLM 0x110 + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + +static unsigned int commonrate; +static unsigned int armrate; +static unsigned int fixedrate = 27000000; /* 27 MHZ */ + +extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); + +/* + * Returns a clock. Note that we first try to use device id on the bus + * and clock name. If this fails, we try to use clock name only. + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(p, &clocks, node) { + if (p->id == idno && + strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + +found: + mutex_unlock(&clocks_mutex); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + if (clk && !IS_ERR(clk)) + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +static int __clk_enable(struct clk *clk) +{ + if (clk->flags & ALWAYS_ENABLED) + return 0; + + davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); + return 0; +} + +static void __clk_disable(struct clk *clk) +{ + if (clk->usecount) + return; + + davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret = 0; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + if (clk->usecount++ == 0) { + spin_lock_irqsave(&clockfw_lock, flags); + ret = __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + if (clk->usecount > 0 && !(--clk->usecount)) { + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + } +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + return *(clk->rate); +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + return *(clk->rate); +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* changing the clk rate is not supported */ + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + list_add(&clk->node, &clocks); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +static struct clk davinci_clks[] = { + { + .name = "ARMCLK", + .rate = &armrate, + .lpsc = -1, + .flags = ALWAYS_ENABLED, + }, + { + .name = "UART", + .rate = &fixedrate, + .lpsc = DAVINCI_LPSC_UART0, + }, + { + .name = "EMACCLK", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, + }, + { + .name = "I2CCLK", + .rate = &fixedrate, + .lpsc = DAVINCI_LPSC_I2C, + }, + { + .name = "IDECLK", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_ATA, + }, + { + .name = "McBSPCLK", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_McBSP, + }, + { + .name = "MMCSDCLK", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_MMC_SD, + }, + { + .name = "SPICLK", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_SPI, + }, + { + .name = "gpio", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_GPIO, + }, + { + .name = "AEMIFCLK", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_AEMIF, + .usecount = 1, + } +}; + +int __init davinci_clk_init(void) +{ + struct clk *clkp; + int count = 0; + u32 pll_mult; + + pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); + commonrate = ((pll_mult + 1) * 27000000) / 6; + armrate = ((pll_mult + 1) * 27000000) / 2; + + for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); + count++, clkp++) { + clk_register(clkp); + + /* Turn on clocks that have been enabled in the + * table above */ + if (clkp->usecount) + clk_enable(clkp); + } + + return 0; +} + +#ifdef CONFIG_PROC_FS +#include <linux/proc_fs.h> +#include <linux/seq_file.h> + +static void *davinci_ck_start(struct seq_file *m, loff_t *pos) +{ + return *pos < 1 ? (void *)1 : NULL; +} + +static void *davinci_ck_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return NULL; +} + +static void davinci_ck_stop(struct seq_file *m, void *v) +{ +} + +static int davinci_ck_show(struct seq_file *m, void *v) +{ + struct clk *cp; + + list_for_each_entry(cp, &clocks, node) + seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); + + return 0; +} + +static struct seq_operations davinci_ck_op = { + .start = davinci_ck_start, + .next = davinci_ck_next, + .stop = davinci_ck_stop, + .show = davinci_ck_show +}; + +static int davinci_ck_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &davinci_ck_op); +} + +static struct file_operations proc_davinci_ck_operations = { + .open = davinci_ck_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init davinci_ck_proc_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("davinci_clocks", 0, NULL); + if (entry) + entry->proc_fops = &proc_davinci_ck_operations; + return 0; + +} +__initcall(davinci_ck_proc_init); +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h new file mode 100644 index 000000000000..ed47079a52e4 --- /dev/null +++ b/arch/arm/mach-davinci/clock.h @@ -0,0 +1,33 @@ +/* + * TI DaVinci clock definitions + * + * Copyright (C) 2006 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_DAVINCI_CLOCK_H +#define __ARCH_ARM_DAVINCI_CLOCK_H + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + unsigned int *rate; + int id; + __s8 usecount; + __u8 flags; + __u8 lpsc; +}; + +/* Clock flags */ +#define RATE_CKCTL 1 +#define RATE_FIXED 2 +#define RATE_PROPAGATES 4 +#define VIRTUAL_CLOCK 8 +#define ALWAYS_ENABLED 16 +#define ENABLE_REG_32BIT 32 + +#endif diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c new file mode 100644 index 000000000000..9c67886e7189 --- /dev/null +++ b/arch/arm/mach-davinci/gpio.c @@ -0,0 +1,286 @@ +/* + * TI DaVinci GPIO Support + * + * Copyright (c) 2006 David Brownell + * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/arch/irqs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> + +#include <asm/mach/irq.h> + +static DEFINE_SPINLOCK(gpio_lock); +static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO); + +int gpio_request(unsigned gpio, const char *tag) +{ + if (gpio >= DAVINCI_N_GPIO) + return -EINVAL; + + if (test_and_set_bit(gpio, gpio_in_use)) + return -EBUSY; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + if (gpio >= DAVINCI_N_GPIO) + return; + + clear_bit(gpio, gpio_in_use); +} +EXPORT_SYMBOL(gpio_free); + +/* create a non-inlined version */ +static struct gpio_controller *__iomem gpio2controller(unsigned gpio) +{ + return __gpio_to_controller(gpio); +} + +/* + * Assuming the pin is muxed as a gpio output, set its output value. + */ +void __gpio_set(unsigned gpio, int value) +{ + struct gpio_controller *__iomem g = gpio2controller(gpio); + + __raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data); +} +EXPORT_SYMBOL(__gpio_set); + + +/* + * Read the pin's value (works even if it's set up as output); + * returns zero/nonzero. + * + * Note that changes are synched to the GPIO clock, so reading values back + * right after you've set them may give old values. + */ +int __gpio_get(unsigned gpio) +{ + struct gpio_controller *__iomem g = gpio2controller(gpio); + + return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data)); +} +EXPORT_SYMBOL(__gpio_get); + + +/*--------------------------------------------------------------------------*/ + +/* + * board setup code *MUST* set PINMUX0 and PINMUX1 as + * needed, and enable the GPIO clock. + */ + +int gpio_direction_input(unsigned gpio) +{ + struct gpio_controller *__iomem g = gpio2controller(gpio); + u32 temp; + u32 mask; + + if (!g) + return -EINVAL; + + spin_lock(&gpio_lock); + mask = __gpio_mask(gpio); + temp = __raw_readl(&g->dir); + temp |= mask; + __raw_writel(temp, &g->dir); + spin_unlock(&gpio_lock); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + struct gpio_controller *__iomem g = gpio2controller(gpio); + u32 temp; + u32 mask; + + if (!g) + return -EINVAL; + + spin_lock(&gpio_lock); + mask = __gpio_mask(gpio); + temp = __raw_readl(&g->dir); + temp &= ~mask; + __raw_writel(mask, value ? &g->set_data : &g->clr_data); + __raw_writel(temp, &g->dir); + spin_unlock(&gpio_lock); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +/* + * We expect irqs will normally be set up as input pins, but they can also be + * used as output pins ... which is convenient for testing. + * + * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition + * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have + * a good way to hook those up ... + * + * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * serve as EDMA event triggers. + */ + +static void gpio_irq_disable(unsigned irq) +{ + struct gpio_controller *__iomem g = get_irq_chip_data(irq); + u32 mask = __gpio_mask(irq_to_gpio(irq)); + + __raw_writel(mask, &g->clr_falling); + __raw_writel(mask, &g->clr_rising); +} + +static void gpio_irq_enable(unsigned irq) +{ + struct gpio_controller *__iomem g = get_irq_chip_data(irq); + u32 mask = __gpio_mask(irq_to_gpio(irq)); + + if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING) + __raw_writel(mask, &g->set_falling); + if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING) + __raw_writel(mask, &g->set_rising); +} + +static int gpio_irq_type(unsigned irq, unsigned trigger) +{ + struct gpio_controller *__iomem g = get_irq_chip_data(irq); + u32 mask = __gpio_mask(irq_to_gpio(irq)); + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; + irq_desc[irq].status |= trigger; + + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + return 0; +} + +static struct irq_chip gpio_irqchip = { + .name = "GPIO", + .enable = gpio_irq_enable, + .disable = gpio_irq_disable, + .set_type = gpio_irq_type, +}; + +static void +gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct gpio_controller *__iomem g = get_irq_chip_data(irq); + u32 mask = 0xffff; + + /* we only care about one bank */ + if (irq & 1) + mask <<= 16; + + /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->ack(irq); + while (1) { + u32 status; + struct irq_desc *gpio; + int n; + int res; + + /* ack any irqs */ + status = __raw_readl(&g->intstat) & mask; + if (!status) + break; + __raw_writel(status, &g->intstat); + if (irq & 1) + status >>= 16; + + /* now demux them to the right lowlevel handler */ + n = (int)get_irq_data(irq); + gpio = &irq_desc[n]; + while (status) { + res = ffs(status); + n += res; + gpio += res; + desc_handle_irq(n - 1, gpio - 1); + status >>= res; + } + } + desc->chip->unmask(irq); + /* now it may re-trigger */ +} + +/* + * NOTE: for suspend/resume, probably best to make a sysdev (and class) + * with its suspend/resume calls hooking into the results of the set_wake() + * calls ... so if no gpios are wakeup events the clock can be disabled, + * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 + * can be set appropriately for GPIOV33 pins. + */ + +static int __init davinci_gpio_irq_setup(void) +{ + unsigned gpio, irq, bank; + struct clk *clk; + + clk = clk_get(NULL, "gpio"); + if (IS_ERR(clk)) { + printk(KERN_ERR "Error %ld getting gpio clock?\n", + PTR_ERR(clk)); + return 0; + } + + clk_enable(clk); + + for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; + gpio < DAVINCI_N_GPIO; bank++) { + struct gpio_controller *__iomem g = gpio2controller(gpio); + unsigned i; + + __raw_writel(~0, &g->clr_falling); + __raw_writel(~0, &g->clr_rising); + + /* set up all irqs in this bank */ + set_irq_chained_handler(bank, gpio_irq_handler); + set_irq_chip_data(bank, g); + set_irq_data(bank, (void *)irq); + + for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; + i++, irq++, gpio++) { + set_irq_chip(irq, &gpio_irqchip); + set_irq_chip_data(irq, g); + set_irq_handler(irq, handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + } + } + + /* BINTEN -- per-bank interrupt enable. genirq would also let these + * bits be set/cleared dynamically. + */ + __raw_writel(0x1f, (void *__iomem) + IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); + + printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); + + return 0; +} + +arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 87fae6fb6ecf..47787ff84a6a 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -17,6 +17,7 @@ #include <asm/memory.h> #include <asm/mach/map.h> +#include <asm/arch/clock.h> extern void davinci_check_revision(void); @@ -49,3 +50,8 @@ void __init davinci_map_common_io(void) */ davinci_check_revision(); } + +void __init davinci_init_common_hw(void) +{ + davinci_clk_init(); +} diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c new file mode 100644 index 000000000000..92d26bd305b7 --- /dev/null +++ b/arch/arm/mach-davinci/mux.c @@ -0,0 +1,41 @@ +/* + * DaVinci pin multiplexing configurations + * + * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm/hardware.h> + +#include <asm/arch/mux.h> + +/* System control register offsets */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 + +static DEFINE_SPINLOCK(mux_lock); + +void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +{ + u32 pinmux, muxreg = PINMUX0; + + if (mux >= DAVINCI_MUX_LEVEL2) { + muxreg = PINMUX1; + mux -= DAVINCI_MUX_LEVEL2; + } + + spin_lock(&mux_lock); + pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); + if (enable) + pinmux |= (1 << mux); + else + pinmux &= ~(1 << mux); + davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); + spin_unlock(&mux_lock); +} diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index e1b0050283a6..1334416559ad 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -25,39 +25,40 @@ #include <asm/io.h> #include <asm/hardware.h> #include <asm/arch/psc.h> +#include <asm/arch/mux.h> -#define PTCMD __REG(0x01C41120) -#define PDSTAT __REG(0x01C41200) -#define PDCTL1 __REG(0x01C41304) -#define EPCPR __REG(0x01C41070) -#define PTSTAT __REG(0x01C41128) +/* PSC register offsets */ +#define EPCPR 0x070 +#define PTCMD 0x120 +#define PTSTAT 0x128 +#define PDSTAT 0x200 +#define PDCTL1 0x304 +#define MDSTAT 0x800 +#define MDCTL 0xA00 -#define MDSTAT IO_ADDRESS(0x01C41800) -#define MDCTL IO_ADDRESS(0x01C41A00) - -#define PINMUX0 __REG(0x01c40000) -#define PINMUX1 __REG(0x01c40004) -#define VDD3P3V_PWDN __REG(0x01C40048) +/* System control register offsets */ +#define VDD3P3V_PWDN 0x48 static void davinci_psc_mux(unsigned int id) { switch (id) { case DAVINCI_LPSC_ATA: - PINMUX0 |= (1 << 17) | (1 << 16); + davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); + davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); break; case DAVINCI_LPSC_MMC_SD: /* VDD power manupulations are done in U-Boot for CPMAC * so applies to MMC as well */ /*Set up the pull regiter for MMC */ - VDD3P3V_PWDN = 0x0; - PINMUX1 &= (~(1 << 9)); + davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); + davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); break; case DAVINCI_LPSC_I2C: - PINMUX1 |= (1 << 7); + davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); break; case DAVINCI_LPSC_McBSP: - PINMUX1 |= (1 << 10); + davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); break; default: break; @@ -67,33 +68,59 @@ static void davinci_psc_mux(unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - volatile unsigned int *mdstat = (unsigned int *)((int)MDSTAT + 4 * id); - volatile unsigned int *mdctl = (unsigned int *)((int)MDCTL + 4 * id); + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; if (id < 0) return; + mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); if (enable) - *mdctl |= 0x00000003; /* Enable Module */ + mdctl |= 0x00000003; /* Enable Module */ else - *mdctl &= 0xFFFFFFF2; /* Disable Module */ + mdctl &= 0xFFFFFFF2; /* Disable Module */ + davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + + pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + if ((pdstat & 0x00000001) == 0) { + pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 |= 0x1; + davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + + ptcmd = 1 << domain; + davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); - if ((PDSTAT & 0x00000001) == 0) { - PDCTL1 |= 0x1; - PTCMD = (1 << domain); - while ((((EPCPR >> domain) & 1) == 0)); + do { + epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + EPCPR); + } while ((((epcpr >> domain) & 1) == 0)); - PDCTL1 |= 0x100; - while (!(((PTSTAT >> domain) & 1) == 0)); + pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 |= 0x100; + davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + + do { + ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + PTSTAT); + } while (!(((ptstat >> domain) & 1) == 0)); } else { - PTCMD = (1 << domain); - while (!(((PTSTAT >> domain) & 1) == 0)); + ptcmd = 1 << domain; + davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + + do { + ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + PTSTAT); + } while (!(((ptstat >> domain) & 1) == 0)); } if (enable) - while (!((*mdstat & 0x0000001F) == 0x3)); + mdstat_mask = 0x3; else - while (!((*mdstat & 0x0000001F) == 0x2)); + mdstat_mask = 0x2; + + do { + mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + MDSTAT + 4 * id); + } while (!((mdstat & 0x0000001F) == mdstat_mask)); if (enable) davinci_psc_mux(id); diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 1c474cf709ca..a58b678006df 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -28,12 +28,16 @@ #include <linux/module.h> #include <linux/string.h> +#include <asm/errno.h> #include <asm/arch/imxfb.h> #include <asm/hardware.h> #include <asm/arch/imx-regs.h> #include <asm/mach/map.h> #include <asm/arch/mmc.h> +#include <asm/arch/gpio.h> + +unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG]; void imx_gpio_mode(int gpio_mode) { @@ -95,6 +99,120 @@ void imx_gpio_mode(int gpio_mode) EXPORT_SYMBOL(imx_gpio_mode); +int imx_gpio_request(unsigned gpio, const char *label) +{ + if(gpio >= (GPIO_PORT_MAX + 1) * 32) + printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n", + gpio, label ? label : "?"); + return -EINVAL; + + if(test_and_set_bit(gpio, imx_gpio_alloc_map)) { + printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n", + gpio, label ? label : "?"); + return -EBUSY; + } + + return 0; +} + +EXPORT_SYMBOL(imx_gpio_request); + +void imx_gpio_free(unsigned gpio) +{ + if(gpio >= (GPIO_PORT_MAX + 1) * 32) + return; + + clear_bit(gpio, imx_gpio_alloc_map); +} + +EXPORT_SYMBOL(imx_gpio_free); + +int imx_gpio_direction_input(unsigned gpio) +{ + imx_gpio_mode(gpio| GPIO_IN); + return 0; +} + +EXPORT_SYMBOL(imx_gpio_direction_input); + +int imx_gpio_direction_output(unsigned gpio, int value) +{ + imx_gpio_set_value(gpio, value); + imx_gpio_mode(gpio| GPIO_OUT); + return 0; +} + +EXPORT_SYMBOL(imx_gpio_direction_output); + +int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + int alloc_mode, const char *label) +{ + const int *p = pin_list; + int i; + unsigned gpio; + unsigned mode; + + for (i = 0; i < count; i++) { + gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); + mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); + + if (gpio >= (GPIO_PORT_MAX + 1) * 32) + goto setup_error; + + if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE) + imx_gpio_free(gpio); + else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC)) + if (imx_gpio_request(gpio, label)) + if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) + goto setup_error; + + if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY | + IMX_GPIO_ALLOC_MODE_RELEASE))) + imx_gpio_mode(gpio | mode); + + p++; + } + return 0; + +setup_error: + if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC | + IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) + return -EINVAL; + + while (p != pin_list) { + p--; + gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); + imx_gpio_free(gpio); + } + + return -EINVAL; +} + +EXPORT_SYMBOL(imx_gpio_setup_multiple_pins); + +void __imx_gpio_set_value(unsigned gpio, int value) +{ + imx_gpio_set_value_inline(gpio, value); +} + +EXPORT_SYMBOL(__imx_gpio_set_value); + +int imx_gpio_to_irq(unsigned gpio) +{ + return IRQ_GPIOA(0) + gpio; +} + +EXPORT_SYMBOL(imx_gpio_to_irq); + +int imx_irq_to_gpio(unsigned irq) +{ + if (irq < IRQ_GPIOA(0)) + return -EINVAL; + return irq - IRQ_GPIOA(0); +} + +EXPORT_SYMBOL(imx_irq_to_gpio); + /* * get the system pll clock in Hz * diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 6960a9d04217..010f6fa984a6 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -3,6 +3,7 @@ * * Copyright (C) 2000-2001 Deep Blue Solutions * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +16,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/hardware.h> #include <asm/io.h> @@ -25,7 +27,8 @@ /* Use timer 1 as system timer */ #define TIMER_BASE IMX_TIM1_BASE -static unsigned long evt_diff; +static struct clock_event_device clockevent_imx; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; /* * IRQ handler for the timer @@ -33,25 +36,20 @@ static unsigned long evt_diff; static irqreturn_t imx_timer_interrupt(int irq, void *dev_id) { + struct clock_event_device *evt = &clockevent_imx; uint32_t tstat; + irqreturn_t ret = IRQ_NONE; /* clear the interrupt */ tstat = IMX_TSTAT(TIMER_BASE); IMX_TSTAT(TIMER_BASE) = 0; if (tstat & TSTAT_COMP) { - do { - - write_seqlock(&xtime_lock); - timer_tick(); - write_sequnlock(&xtime_lock); - IMX_TCMP(TIMER_BASE) += evt_diff; - - } while (unlikely((int32_t)(IMX_TCMP(TIMER_BASE) - - IMX_TCN(TIMER_BASE)) < 0)); + evt->event_handler(evt); + ret = IRQ_HANDLED; } - return IRQ_HANDLED; + return ret; } static struct irqaction imx_timer_irq = { @@ -70,10 +68,8 @@ static void __init imx_timer_hardware_init(void) */ IMX_TCTL(TIMER_BASE) = 0; IMX_TPRER(TIMER_BASE) = 0; - IMX_TCMP(TIMER_BASE) = LATCH - 1; - IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_IRQEN | TCTL_TEN; - evt_diff = LATCH; + IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; } cycle_t imx_get_cycles(void) @@ -99,11 +95,108 @@ static int __init imx_clocksource_init(void) return 0; } +static int imx_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = IMX_TCN(TIMER_BASE) + evt; + IMX_TCMP(TIMER_BASE) = tcmp; + + return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0; +} + +#ifdef DEBUG +static const char *clock_event_mode_label[]={ + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" +}; +#endif /*DEBUG*/ + +static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call imx_set_next_event() + */ + local_irq_save(flags); + /* Disable interrupt in GPT module */ + IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN; + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3; + /* Clear pending interrupt */ + IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP; + } + +#ifdef DEBUG + printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n", + clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]); +#endif /*DEBUG*/ + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * imx_set_next_event(), the core has about 4 minutes + * to call imx_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN; + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* Left event sources disabled, no more interrupts appears */ + break; + } +} + +static struct clock_event_device clockevent_imx = { + .name = "imx_timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = imx_set_mode, + .set_next_event = imx_set_next_event, + .rating = 200, +}; + +static int __init imx_clockevent_init(void) +{ + clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC, + clockevent_imx.shift); + clockevent_imx.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_imx); + clockevent_imx.min_delta_ns = + clockevent_delta2ns(0xf, &clockevent_imx); + + clockevent_imx.cpumask = cpumask_of_cpu(0); + + clockevents_register_device(&clockevent_imx); + + return 0; +} + + static void __init imx_timer_init(void) { imx_timer_hardware_init(); imx_clocksource_init(); + imx_clockevent_init(); + /* * Make irqs happen for the system timer */ diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index bc4871553f6a..bfe0c87e3397 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -25,6 +25,7 @@ #include <asm/hardware.h> #include <asm/irq.h> #include <asm/io.h> +#include <asm/hardware/iop_adma.h> #define IOP13XX_UART_XTAL 33334000 #define IOP13XX_SETUP_DEBUG 0 @@ -236,19 +237,143 @@ static unsigned long iq8134x_probe_flash_size(void) } #endif +/* ADMA Channels */ +static struct resource iop13xx_adma_0_resources[] = { + [0] = { + .start = IOP13XX_ADMA_PHYS_BASE(0), + .end = IOP13XX_ADMA_UPPER_PA(0), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP13XX_ADMA0_EOT, + .end = IRQ_IOP13XX_ADMA0_EOT, + .flags = IORESOURCE_IRQ + }, + [2] = { + .start = IRQ_IOP13XX_ADMA0_EOC, + .end = IRQ_IOP13XX_ADMA0_EOC, + .flags = IORESOURCE_IRQ + }, + [3] = { + .start = IRQ_IOP13XX_ADMA0_ERR, + .end = IRQ_IOP13XX_ADMA0_ERR, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop13xx_adma_1_resources[] = { + [0] = { + .start = IOP13XX_ADMA_PHYS_BASE(1), + .end = IOP13XX_ADMA_UPPER_PA(1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP13XX_ADMA1_EOT, + .end = IRQ_IOP13XX_ADMA1_EOT, + .flags = IORESOURCE_IRQ + }, + [2] = { + .start = IRQ_IOP13XX_ADMA1_EOC, + .end = IRQ_IOP13XX_ADMA1_EOC, + .flags = IORESOURCE_IRQ + }, + [3] = { + .start = IRQ_IOP13XX_ADMA1_ERR, + .end = IRQ_IOP13XX_ADMA1_ERR, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop13xx_adma_2_resources[] = { + [0] = { + .start = IOP13XX_ADMA_PHYS_BASE(2), + .end = IOP13XX_ADMA_UPPER_PA(2), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP13XX_ADMA2_EOT, + .end = IRQ_IOP13XX_ADMA2_EOT, + .flags = IORESOURCE_IRQ + }, + [2] = { + .start = IRQ_IOP13XX_ADMA2_EOC, + .end = IRQ_IOP13XX_ADMA2_EOC, + .flags = IORESOURCE_IRQ + }, + [3] = { + .start = IRQ_IOP13XX_ADMA2_ERR, + .end = IRQ_IOP13XX_ADMA2_ERR, + .flags = IORESOURCE_IRQ + } +}; + +static u64 iop13xx_adma_dmamask = DMA_64BIT_MASK; +static struct iop_adma_platform_data iop13xx_adma_0_data = { + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct iop_adma_platform_data iop13xx_adma_1_data = { + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct iop_adma_platform_data iop13xx_adma_2_data = { + .hw_id = 2, + .pool_size = PAGE_SIZE, +}; + +/* The ids are fixed up later in iop13xx_platform_init */ +static struct platform_device iop13xx_adma_0_channel = { + .name = "iop-adma", + .id = 0, + .num_resources = 4, + .resource = iop13xx_adma_0_resources, + .dev = { + .dma_mask = &iop13xx_adma_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *) &iop13xx_adma_0_data, + }, +}; + +static struct platform_device iop13xx_adma_1_channel = { + .name = "iop-adma", + .id = 0, + .num_resources = 4, + .resource = iop13xx_adma_1_resources, + .dev = { + .dma_mask = &iop13xx_adma_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *) &iop13xx_adma_1_data, + }, +}; + +static struct platform_device iop13xx_adma_2_channel = { + .name = "iop-adma", + .id = 0, + .num_resources = 4, + .resource = iop13xx_adma_2_resources, + .dev = { + .dma_mask = &iop13xx_adma_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *) &iop13xx_adma_2_data, + }, +}; + void __init iop13xx_map_io(void) { /* Initialize the Static Page Table maps */ iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc)); } -static int init_uart = 0; -static int init_i2c = 0; +static int init_uart; +static int init_i2c; +static int init_adma; void __init iop13xx_platform_init(void) { int i; - u32 uart_idx, i2c_idx, plat_idx; + u32 uart_idx, i2c_idx, adma_idx, plat_idx; struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES]; /* set the bases so we can read the device id */ @@ -294,6 +419,12 @@ void __init iop13xx_platform_init(void) } } + if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) { + init_adma |= IOP13XX_INIT_ADMA_0; + init_adma |= IOP13XX_INIT_ADMA_1; + init_adma |= IOP13XX_INIT_ADMA_2; + } + plat_idx = 0; uart_idx = 0; i2c_idx = 0; @@ -332,6 +463,56 @@ void __init iop13xx_platform_init(void) } } + /* initialize adma channel ids and capabilities */ + adma_idx = 0; + for (i = 0; i < IQ81340_NUM_ADMA; i++) { + struct iop_adma_platform_data *plat_data; + if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG) + printk(KERN_INFO + "Adding adma%d to platform device list\n", i); + switch (init_adma & (1 << i)) { + case IOP13XX_INIT_ADMA_0: + iop13xx_adma_0_channel.id = adma_idx++; + iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel; + plat_data = &iop13xx_adma_0_data; + dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); + dma_cap_set(DMA_XOR, plat_data->cap_mask); + dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); + dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_MEMSET, plat_data->cap_mask); + dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); + dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); + break; + case IOP13XX_INIT_ADMA_1: + iop13xx_adma_1_channel.id = adma_idx++; + iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel; + plat_data = &iop13xx_adma_1_data; + dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); + dma_cap_set(DMA_XOR, plat_data->cap_mask); + dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); + dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_MEMSET, plat_data->cap_mask); + dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); + dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); + break; + case IOP13XX_INIT_ADMA_2: + iop13xx_adma_2_channel.id = adma_idx++; + iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel; + plat_data = &iop13xx_adma_2_data; + dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); + dma_cap_set(DMA_XOR, plat_data->cap_mask); + dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); + dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_MEMSET, plat_data->cap_mask); + dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); + dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); + dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask); + dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask); + dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask); + break; + } + } + #ifdef CONFIG_MTD_PHYSMAP iq8134x_flash_resource.end = iq8134x_flash_resource.start + iq8134x_probe_flash_size() - 1; @@ -399,5 +580,35 @@ static int __init iop13xx_init_i2c_setup(char *str) return 1; } +static int __init iop13xx_init_adma_setup(char *str) +{ + if (str) { + while (*str != '\0') { + switch (*str) { + case '0': + init_adma |= IOP13XX_INIT_ADMA_0; + break; + case '1': + init_adma |= IOP13XX_INIT_ADMA_1; + break; + case '2': + init_adma |= IOP13XX_INIT_ADMA_2; + break; + case ',': + case '=': + break; + default: + PRINTK("\"iop13xx_init_adma\" malformed" + " at character: \'%c\'", *str); + *(str + 1) = '\0'; + init_adma = IOP13XX_INIT_ADMA_DEFAULT; + } + str++; + } + } + return 1; +} + +__setup("iop13xx_init_adma", iop13xx_init_adma_setup); __setup("iop13xx_init_uart", iop13xx_init_uart_setup); __setup("iop13xx_init_i2c", iop13xx_init_i2c_setup); diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index d3dc278213da..2476347ea62f 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -29,13 +29,15 @@ #define IOP13XX_TPMI_MMR(dev) IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12)) #define IOP13XX_TPMI_MEM(dev) IOP13XX_REG_ADDR32_PHYS(0x60000 + (dev << 13)) #define IOP13XX_TPMI_CTRL(dev) IOP13XX_REG_ADDR32_PHYS(0x50000 + (dev << 10)) +#define IOP13XX_TPMI_IOP_CTRL(dev) (IOP13XX_TPMI_CTRL(dev) + 0x2000) #define IOP13XX_TPMI_MMR_SIZE (SZ_4K - 1) #define IOP13XX_TPMI_MEM_SIZE (255) #define IOP13XX_TPMI_MEM_CTRL (SZ_1K - 1) #define IOP13XX_TPMI_RESOURCE_MMR 0 #define IOP13XX_TPMI_RESOURCE_MEM 1 #define IOP13XX_TPMI_RESOURCE_CTRL 2 -#define IOP13XX_TPMI_RESOURCE_IRQ 3 +#define IOP13XX_TPMI_RESOURCE_IOP_CTRL 3 +#define IOP13XX_TPMI_RESOURCE_IRQ 4 static struct resource iop13xx_tpmi_0_resources[] = { [IOP13XX_TPMI_RESOURCE_MMR] = { @@ -53,6 +55,11 @@ static struct resource iop13xx_tpmi_0_resources[] = { .end = IOP13XX_TPMI_CTRL(0) + IOP13XX_TPMI_MEM_CTRL, .flags = IORESOURCE_MEM, }, + [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = { + .start = IOP13XX_TPMI_IOP_CTRL(0), + .end = IOP13XX_TPMI_IOP_CTRL(0) + IOP13XX_TPMI_MEM_CTRL, + .flags = IORESOURCE_MEM, + }, [IOP13XX_TPMI_RESOURCE_IRQ] = { .start = IRQ_IOP13XX_TPMI0_OUT, .end = IRQ_IOP13XX_TPMI0_OUT, @@ -76,6 +83,11 @@ static struct resource iop13xx_tpmi_1_resources[] = { .end = IOP13XX_TPMI_CTRL(1) + IOP13XX_TPMI_MEM_CTRL, .flags = IORESOURCE_MEM, }, + [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = { + .start = IOP13XX_TPMI_IOP_CTRL(1), + .end = IOP13XX_TPMI_IOP_CTRL(1) + IOP13XX_TPMI_MEM_CTRL, + .flags = IORESOURCE_MEM, + }, [IOP13XX_TPMI_RESOURCE_IRQ] = { .start = IRQ_IOP13XX_TPMI1_OUT, .end = IRQ_IOP13XX_TPMI1_OUT, @@ -99,6 +111,11 @@ static struct resource iop13xx_tpmi_2_resources[] = { .end = IOP13XX_TPMI_CTRL(2) + IOP13XX_TPMI_MEM_CTRL, .flags = IORESOURCE_MEM, }, + [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = { + .start = IOP13XX_TPMI_IOP_CTRL(2), + .end = IOP13XX_TPMI_IOP_CTRL(2) + IOP13XX_TPMI_MEM_CTRL, + .flags = IORESOURCE_MEM, + }, [IOP13XX_TPMI_RESOURCE_IRQ] = { .start = IRQ_IOP13XX_TPMI2_OUT, .end = IRQ_IOP13XX_TPMI2_OUT, @@ -122,6 +139,11 @@ static struct resource iop13xx_tpmi_3_resources[] = { .end = IOP13XX_TPMI_CTRL(3) + IOP13XX_TPMI_MEM_CTRL, .flags = IORESOURCE_MEM, }, + [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = { + .start = IOP13XX_TPMI_IOP_CTRL(3), + .end = IOP13XX_TPMI_IOP_CTRL(3) + IOP13XX_TPMI_MEM_CTRL, + .flags = IORESOURCE_MEM, + }, [IOP13XX_TPMI_RESOURCE_IRQ] = { .start = IRQ_IOP13XX_TPMI3_OUT, .end = IRQ_IOP13XX_TPMI3_OUT, @@ -133,7 +155,7 @@ u64 iop13xx_tpmi_mask = DMA_64BIT_MASK; static struct platform_device iop13xx_tpmi_0_device = { .name = "iop-tpmi", .id = 0, - .num_resources = 4, + .num_resources = ARRAY_SIZE(iop13xx_tpmi_0_resources), .resource = iop13xx_tpmi_0_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, @@ -144,7 +166,7 @@ static struct platform_device iop13xx_tpmi_0_device = { static struct platform_device iop13xx_tpmi_1_device = { .name = "iop-tpmi", .id = 1, - .num_resources = 4, + .num_resources = ARRAY_SIZE(iop13xx_tpmi_1_resources), .resource = iop13xx_tpmi_1_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, @@ -155,7 +177,7 @@ static struct platform_device iop13xx_tpmi_1_device = { static struct platform_device iop13xx_tpmi_2_device = { .name = "iop-tpmi", .id = 2, - .num_resources = 4, + .num_resources = ARRAY_SIZE(iop13xx_tpmi_2_resources), .resource = iop13xx_tpmi_2_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, @@ -166,7 +188,7 @@ static struct platform_device iop13xx_tpmi_2_device = { static struct platform_device iop13xx_tpmi_3_device = { .name = "iop-tpmi", .id = 3, - .num_resources = 4, + .num_resources = ARRAY_SIZE(iop13xx_tpmi_3_resources), .resource = iop13xx_tpmi_3_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 5776fd884115..2b086ab2668c 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -180,6 +180,8 @@ static void __init glantank_init_machine(void) platform_device_register(&iop3xx_i2c1_device); platform_device_register(&glantank_flash_device); platform_device_register(&glantank_serial_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); pm_power_off = glantank_power_off; } diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index d4eefbea1fe6..98cfa1cd6bdb 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -298,9 +298,14 @@ static void __init iq31244_init_machine(void) platform_device_register(&iop3xx_i2c1_device); platform_device_register(&iq31244_flash_device); platform_device_register(&iq31244_serial_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); if (is_ep80219()) pm_power_off = ep80219_power_off; + + if (!is_80219()) + platform_device_register(&iop3xx_aau_channel); } static int __init force_ep80219_setup(char *str) diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 8d9f49164a84..18ad29f213b2 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -181,6 +181,9 @@ static void __init iq80321_init_machine(void) platform_device_register(&iop3xx_i2c1_device); platform_device_register(&iq80321_flash_device); platform_device_register(&iq80321_serial_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); + platform_device_register(&iop3xx_aau_channel); } MACHINE_START(IQ80321, "Intel IQ80321") diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index d55005d64781..390a97d39e5a 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -245,6 +245,8 @@ static void __init n2100_init_machine(void) platform_device_register(&iop3xx_i2c0_device); platform_device_register(&n2100_flash_device); platform_device_register(&n2100_serial_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); pm_power_off = n2100_power_off; diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 2b063180687a..433188ebff2a 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -136,6 +136,9 @@ static void __init iq80331_init_machine(void) platform_device_register(&iop33x_uart0_device); platform_device_register(&iop33x_uart1_device); platform_device_register(&iq80331_flash_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); + platform_device_register(&iop3xx_aau_channel); } MACHINE_START(IQ80331, "Intel IQ80331") diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 7889ce3cb08e..416c09564cc6 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -136,6 +136,9 @@ static void __init iq80332_init_machine(void) platform_device_register(&iop33x_uart0_device); platform_device_register(&iop33x_uart1_device); platform_device_register(&iq80332_flash_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); + platform_device_register(&iop3xx_aau_channel); } MACHINE_START(IQ80332, "Intel IQ80332") diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 060909870b50..61b2dfcb89d6 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -41,6 +41,22 @@ config ARCH_ADI_COYOTE Engineering Coyote Gateway Reference Platform. For more information on this platform, see <file:Documentation/arm/IXP4xx>. +config MACH_GATEWAY7001 + bool "Gateway 7001" + select PCI + help + Say 'Y' here if you want your kernel to support Gateway's + 7001 Access Point. For more information on this platform, + see http://openwrt.org + +config MACH_WG302V2 + bool "Netgear WG302 v2 / WAG302 v2" + select PCI + help + Say 'Y' here if you want your kernel to support Netgear's + WG302 v2 or WAG302 v2 Access Points. For more information + on this platform, see http://openwrt.org + config ARCH_IXDP425 bool "IXDP425" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 3b87c47e06cf..77e00ade5585 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -13,6 +13,8 @@ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o +obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o +obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-y += common.o @@ -24,5 +26,7 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o +obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o +obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c new file mode 100644 index 000000000000..6abf568322d3 --- /dev/null +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -0,0 +1,63 @@ +/* + * arch/arch/mach-ixp4xx/gateway7001-pci.c + * + * PCI setup routines for Gateway 7001 + * + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <asm/hardware.h> + +#include <asm/mach/pci.h> + +void __init gateway7001_pci_preinit(void) +{ + set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IRQ_IXP4XX_GPIO11; + else if (slot == 2) + return IRQ_IXP4XX_GPIO10; + else return -1; +} + +struct hw_pci gateway7001_pci __initdata = { + .nr_controllers = 1, + .preinit = gateway7001_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = gateway7001_map_irq, +}; + +int __init gateway7001_pci_init(void) +{ + if (machine_is_gateway7001()) + pci_common_init(&gateway7001_pci); + return 0; +} + +subsys_initcall(gateway7001_pci_init); diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c new file mode 100644 index 000000000000..37876832e141 --- /dev/null +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ixp4xx/gateway7001-setup.c + * + * Board setup for the Gateway 7001 board + * + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz <Kaloz@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/slab.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data gateway7001_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource gateway7001_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device gateway7001_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &gateway7001_flash_data, + }, + .num_resources = 1, + .resource = &gateway7001_flash_resource, +}; + +static struct resource gateway7001_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port gateway7001_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device gateway7001_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = gateway7001_uart_data, + }, + .num_resources = 1, + .resource = &gateway7001_uart_resource, +}; + +static struct platform_device *gateway7001_devices[] __initdata = { + &gateway7001_flash, + &gateway7001_uart +}; + +static void __init gateway7001_init(void) +{ + ixp4xx_sys_init(); + + gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); +} + +#ifdef CONFIG_MACH_GATEWAY7001 +MACHINE_START(GATEWAY7001, "Gateway 7001 AP") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gateway7001_init, +MACHINE_END +#endif diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index a66484b63d36..0d5a42455820 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -25,17 +25,13 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/irq.h> + #include <asm/mach-types.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/arch/gtwx5715.h> #include <asm/mach/pci.h> -extern void ixp4xx_pci_preinit(void); -extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - - /* * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h * Slot 0 isn't actually populated with a card connector but diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index ec4f07950ec6..d5008d8fc9a5 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -15,6 +15,10 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/slab.h> +#include <linux/io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <asm/types.h> #include <asm/setup.h> @@ -24,6 +28,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include <asm/delay.h> static struct flash_platform_data ixdp425_flash_data = { .map_name = "cfi_probe", @@ -44,6 +49,77 @@ static struct platform_device ixdp425_flash = { .resource = &ixdp425_flash_resource, }; +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + +#ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition ixdp425_partitions[] = { + { + .name = "ixp400 NAND FS 0", + .offset = 0, + .size = SZ_8M + }, { + .name = "ixp400 NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; +#endif + +static void +ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + int offset = (int)this->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_NCE) { + gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW); + udelay(5); + } else + gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH); + + offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0; + offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0; + this->priv = (void *)offset; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W + offset); +} + +static struct platform_nand_data ixdp425_flash_nand_data = { + .chip = { + .chip_delay = 30, + .options = NAND_NO_AUTOINCR, +#ifdef CONFIG_MTD_PARTITIONS + .part_probe_types = part_probes, + .partitions = ixdp425_partitions, + .nr_partitions = ARRAY_SIZE(ixdp425_partitions), +#endif + }, + .ctrl = { + .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl + } +}; + +static struct resource ixdp425_flash_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp425_flash_nand = { + .name = "gen_nand", + .id = -1, + .dev = { + .platform_data = &ixdp425_flash_nand_data, + }, + .num_resources = 1, + .resource = &ixdp425_flash_nand_resource, +}; +#endif /* CONFIG_MTD_NAND_PLATFORM */ + static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = { .sda_pin = IXDP425_SDA_PIN, .scl_pin = IXDP425_SCL_PIN, @@ -104,6 +180,10 @@ static struct platform_device ixdp425_uart = { static struct platform_device *ixdp425_devices[] __initdata = { &ixdp425_i2c_controller, &ixdp425_flash, +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + &ixdp425_flash_nand, +#endif &ixdp425_uart }; @@ -115,6 +195,22 @@ static void __init ixdp425_init(void) ixdp425_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3), + ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1; + + gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT); + + /* Configure expansion bus for NAND Flash */ + *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(1) | /* extend by 1 clock */ + IXP4XX_EXP_BUS_CYCLES(0) | /* Intel cycles */ + IXP4XX_EXP_BUS_SIZE(0) | /* 512bytes addr space*/ + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; /* 8 bit data bus */ +#endif + if (cpu_is_ixp43x()) { ixdp425_uart.num_resources = 1; ixdp425_uart_data[1].flags = 0; diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c new file mode 100644 index 000000000000..6588f2c758e2 --- /dev/null +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -0,0 +1,63 @@ +/* + * arch/arch/mach-ixp4xx/wg302v2-pci.c + * + * PCI setup routines for the Netgear WG302 v2 and WAG302 v2 + * + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Software, Inc. + * + * Maintainer: Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <asm/hardware.h> + +#include <asm/mach/pci.h> + +void __init wg302v2_pci_preinit(void) +{ + set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IRQ_IXP4XX_GPIO8; + else if (slot == 2) + return IRQ_IXP4XX_GPIO9; + else return -1; +} + +struct hw_pci wg302v2_pci __initdata = { + .nr_controllers = 1, + .preinit = wg302v2_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = wg302v2_map_irq, +}; + +int __init wg302v2_pci_init(void) +{ + if (machine_is_wg302v2()) + pci_common_init(&wg302v2_pci); + return 0; +} + +subsys_initcall(wg302v2_pci_init); diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c new file mode 100644 index 000000000000..f7e09ad804e8 --- /dev/null +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-ixp4xx/wg302-setup.c + * + * Board setup for the Netgear WG302 v2 and WAG302 v2 + * + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz <kaloz@openwrt.org> + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/slab.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data wg302v2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource wg302v2_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device wg302v2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &wg302v2_flash_data, + }, + .num_resources = 1, + .resource = &wg302v2_flash_resource, +}; + +static struct resource wg302v2_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port wg302v2_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device wg302v2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = wg302v2_uart_data, + }, + .num_resources = 1, + .resource = &wg302v2_uart_resource, +}; + +static struct platform_device *wg302v2_devices[] __initdata = { + &wg302v2_flash, + &wg302v2_uart, +}; + +static void __init wg302v2_init(void) +{ + ixp4xx_sys_init(); + + wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices)); +} + +#ifdef CONFIG_MACH_WG302V2 +MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = wg302v2_init, +MACHINE_END +#endif diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 56b7d337333a..2a07a281fa8a 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -3,7 +3,7 @@ # Makefile for KS8695 architecture support # -obj-y := cpu.o irq.o time.o devices.o +obj-y := cpu.o irq.o time.o gpio.o devices.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c new file mode 100644 index 000000000000..b1aa3cb3d4a3 --- /dev/null +++ b/arch/arm/mach-ks8695/gpio.c @@ -0,0 +1,218 @@ +/* + * arch/arm/mach-ks8695/gpio.c + * + * Copyright (C) 2006 Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach/irq.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/gpio.h> + +/* + * Configure a GPIO line for either GPIO function, or its internal + * function (Interrupt, Timer, etc). + */ +static void __init_or_module ks8695_gpio_mode(unsigned int pin, short gpio) +{ + unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; + unsigned long x, flags; + + if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */ + return; + + local_irq_save(flags); + + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); + if (gpio) /* GPIO: set bit to 0 */ + x &= ~enable[pin]; + else /* Internal function: set bit to 1 */ + x |= enable[pin]; + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC); + + local_irq_restore(flags); +} + + +static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 }; + +/* + * Configure GPIO pin as external interrupt source. + */ +int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ + return -EINVAL; + + local_irq_save(flags); + + /* set pin as input */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + x &= ~IOPM_(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); + + local_irq_restore(flags); + + /* Set IRQ triggering type */ + set_irq_type(gpio_irq[pin], type); + + /* enable interrupt mode */ + ks8695_gpio_mode(pin, 0); + + return 0; +} +EXPORT_SYMBOL(ks8695_gpio_interrupt); + + + +/* .... Generic GPIO interface .............................................. */ + +/* + * Configure the GPIO line as an input. + */ +int __init_or_module gpio_direction_input(unsigned int pin) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_15) + return -EINVAL; + + /* set pin to GPIO mode */ + ks8695_gpio_mode(pin, 1); + + local_irq_save(flags); + + /* set pin as input */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + x &= ~IOPM_(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); + + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + + +/* + * Configure the GPIO line as an output, with default state. + */ +int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_15) + return -EINVAL; + + /* set pin to GPIO mode */ + ks8695_gpio_mode(pin, 1); + + local_irq_save(flags); + + /* set line state */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + if (state) + x |= (1 << pin); + else + x &= ~(1 << pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); + + /* set pin as output */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + x |= IOPM_(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); + + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + + +/* + * Set the state of an output GPIO line. + */ +void gpio_set_value(unsigned int pin, unsigned int state) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_15) + return; + + local_irq_save(flags); + + /* set output line state */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + if (state) + x |= (1 << pin); + else + x &= ~(1 << pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_set_value); + + +/* + * Read the state of a GPIO line. + */ +int gpio_get_value(unsigned int pin) +{ + unsigned long x; + + if (pin > KS8695_GPIO_15) + return -EINVAL; + + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + return (x & (1 << pin)) != 0; +} +EXPORT_SYMBOL(gpio_get_value); + + +/* + * Map GPIO line to IRQ number. + */ +int gpio_to_irq(unsigned int pin) +{ + if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ + return -EINVAL; + + return gpio_irq[pin]; +} +EXPORT_SYMBOL(gpio_to_irq); + + +/* + * Map IRQ number to GPIO line. + */ +int irq_to_gpio(unsigned int irq) +{ + if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3)) + return -EINVAL; + + return (irq - KS8695_IRQ_EXTERN0); +} +EXPORT_SYMBOL(irq_to_gpio); diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index 8f7c90a0593b..34a31caa6f9d 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -12,7 +12,6 @@ #include <asm/arch/pxa-regs.h> #include <asm/hardware.h> -#include <asm/semaphore.h> struct clk { struct list_head node; @@ -25,21 +24,21 @@ struct clk { }; static LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clocks_lock); struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -101,18 +100,18 @@ static struct clk clk_gpio27 = { int clk_register(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_del(&clk->node); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a1a900d16665..aab27297b3c6 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -44,6 +44,7 @@ #include <asm/hardware/scoop.h> #include "generic.h" +#include "devices.h" #include "sharpsl.h" @@ -368,7 +369,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa25x_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -380,7 +381,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa25x_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -392,7 +393,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa25x_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h new file mode 100644 index 000000000000..9a6faff8e5a7 --- /dev/null +++ b/arch/arm/mach-pxa/devices.h @@ -0,0 +1,11 @@ +extern struct platform_device pxamci_device; +extern struct platform_device pxaudc_device; +extern struct platform_device pxafb_device; +extern struct platform_device ffuart_device; +extern struct platform_device btuart_device; +extern struct platform_device stuart_device; +extern struct platform_device hwuart_device; +extern struct platform_device pxai2c_device; +extern struct platform_device pxai2s_device; +extern struct platform_device pxaficp_device; +extern struct platform_device pxartc_device; diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c index 4440babe7b97..93c4f31f127f 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/mach-pxa/dma.c @@ -25,12 +25,15 @@ #include <asm/arch/pxa-regs.h> -static struct dma_channel { +struct dma_channel { char *name; + pxa_dma_prio prio; void (*irq_handler)(int, void *); void *data; -} dma_channels[PXA_DMA_CHANNELS]; +}; +static struct dma_channel *dma_channels; +static int num_dma_channels; int pxa_request_dma (char *name, pxa_dma_prio prio, void (*irq_handler)(int, void *), @@ -47,8 +50,9 @@ int pxa_request_dma (char *name, pxa_dma_prio prio, do { /* try grabbing a DMA channel with the requested priority */ - pxa_for_each_dma_prio (i, prio) { - if (!dma_channels[i].name) { + for (i = 0; i < num_dma_channels; i++) { + if ((dma_channels[i].prio == prio) && + !dma_channels[i].name) { found = 1; break; } @@ -91,7 +95,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) { int i, dint = DINT; - for (i = 0; i < PXA_DMA_CHANNELS; i++) { + for (i = 0; i < num_dma_channels; i++) { if (dint & (1 << i)) { struct dma_channel *channel = &dma_channels[i]; if (channel->name && channel->irq_handler) { @@ -109,18 +113,32 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init pxa_dma_init (void) +int __init pxa_init_dma(int num_ch) { - int ret; + int i, ret; - ret = request_irq (IRQ_DMA, dma_irq_handler, 0, "DMA", NULL); - if (ret) + dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL); + if (dma_channels == NULL) + return -ENOMEM; + + ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); + if (ret) { printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; -} + kfree(dma_channels); + return ret; + } -arch_initcall(pxa_dma_init); + /* dma channel priorities on pxa2xx processors: + * ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH + * ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM + * ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW + */ + for (i = 0; i < num_ch; i++) + dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); + + num_dma_channels = num_ch; + return 0; +} EXPORT_SYMBOL(pxa_request_dma); EXPORT_SYMBOL(pxa_free_dma); - diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 64b08b744f9f..296539b6359c 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -43,6 +43,7 @@ #include <asm/arch/irda.h> #include <asm/arch/i2c.h> +#include "devices.h" #include "generic.h" /* @@ -242,7 +243,7 @@ static struct resource pxamci_resources[] = { static u64 pxamci_dmamask = 0xffffffffUL; -static struct platform_device pxamci_device = { +struct platform_device pxamci_device = { .name = "pxa2xx-mci", .id = -1, .dev = { @@ -281,7 +282,7 @@ static struct resource pxa2xx_udc_resources[] = { static u64 udc_dma_mask = ~(u32)0; -static struct platform_device udc_device = { +struct platform_device pxaudc_device = { .name = "pxa2xx-udc", .id = -1, .resource = pxa2xx_udc_resources, @@ -307,7 +308,7 @@ static struct resource pxafb_resources[] = { static u64 fb_dma_mask = ~(u64)0; -static struct platform_device pxafb_device = { +struct platform_device pxafb_device = { .name = "pxa2xx-fb", .id = -1, .dev = { @@ -328,24 +329,24 @@ void __init set_pxa_fb_parent(struct device *parent_dev) pxafb_device.dev.parent = parent_dev; } -static struct platform_device ffuart_device = { +struct platform_device ffuart_device = { .name = "pxa2xx-uart", .id = 0, }; -static struct platform_device btuart_device = { +struct platform_device btuart_device = { .name = "pxa2xx-uart", .id = 1, }; -static struct platform_device stuart_device = { +struct platform_device stuart_device = { .name = "pxa2xx-uart", .id = 2, }; -static struct platform_device hwuart_device = { +struct platform_device hwuart_device = { .name = "pxa2xx-uart", .id = 3, }; -static struct resource i2c_resources[] = { +static struct resource pxai2c_resources[] = { { .start = 0x40301680, .end = 0x403016a3, @@ -357,40 +358,19 @@ static struct resource i2c_resources[] = { }, }; -static struct platform_device i2c_device = { +struct platform_device pxai2c_device = { .name = "pxa2xx-i2c", .id = 0, - .resource = i2c_resources, - .num_resources = ARRAY_SIZE(i2c_resources), + .resource = pxai2c_resources, + .num_resources = ARRAY_SIZE(pxai2c_resources), }; -#ifdef CONFIG_PXA27x -static struct resource i2c_power_resources[] = { - { - .start = 0x40f00180, - .end = 0x40f001a3, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PWRI2C, - .end = IRQ_PWRI2C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c_power_device = { - .name = "pxa2xx-i2c", - .id = 1, - .resource = i2c_power_resources, - .num_resources = ARRAY_SIZE(i2c_resources), -}; -#endif - void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) { - i2c_device.dev.platform_data = info; + pxai2c_device.dev.platform_data = info; } -static struct resource i2s_resources[] = { +static struct resource pxai2s_resources[] = { { .start = 0x40400000, .end = 0x40400083, @@ -402,16 +382,16 @@ static struct resource i2s_resources[] = { }, }; -static struct platform_device i2s_device = { +struct platform_device pxai2s_device = { .name = "pxa2xx-i2s", .id = -1, - .resource = i2s_resources, - .num_resources = ARRAY_SIZE(i2s_resources), + .resource = pxai2s_resources, + .num_resources = ARRAY_SIZE(pxai2s_resources), }; static u64 pxaficp_dmamask = ~(u32)0; -static struct platform_device pxaficp_device = { +struct platform_device pxaficp_device = { .name = "pxa2xx-ir", .id = -1, .dev = { @@ -425,42 +405,7 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) pxaficp_device.dev.platform_data = info; } -static struct platform_device pxartc_device = { +struct platform_device pxartc_device = { .name = "sa1100-rtc", .id = -1, }; - -static struct platform_device *devices[] __initdata = { - &pxamci_device, - &udc_device, - &pxafb_device, - &ffuart_device, - &btuart_device, - &stuart_device, - &pxaficp_device, - &i2c_device, -#ifdef CONFIG_PXA27x - &i2c_power_device, -#endif - &i2s_device, - &pxartc_device, -}; - -static int __init pxa_init(void) -{ - int cpuid, ret; - - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); - if (ret) - return ret; - - /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ - cpuid = read_cpuid(CPUID_ID); - if (((cpuid >> 4) & 0xfff) == 0x2d0 || - ((cpuid >> 4) & 0xfff) == 0x290) - ret = platform_device_register(&hwuart_device); - - return ret; -} - -subsys_initcall(pxa_init); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index e54a8dd63c17..91ab2ad8b34b 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -12,8 +12,12 @@ struct sys_timer; extern struct sys_timer pxa_timer; +extern void __init pxa_init_irq_low(void); +extern void __init pxa_init_irq_high(void); +extern void __init pxa_init_irq_gpio(int gpio_nr); +extern void __init pxa25x_init_irq(void); +extern void __init pxa27x_init_irq(void); extern void __init pxa_map_io(void); -extern void __init pxa_init_irq(void); extern unsigned int get_clk_frequency_khz(int info); diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 64df44043a65..465108da2851 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -38,6 +38,7 @@ #include <asm/arch/mmc.h> #include "generic.h" +#include "devices.h" /* TODO: * - add pxa2xx_audio_ops_t device structure @@ -152,7 +153,7 @@ static void __init idp_init(void) static void __init idp_init_irq(void) { - pxa_init_irq(); + pxa25x_init_irq(); set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE); } diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 4619d5fe606c..4b867b0789d5 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -30,12 +30,12 @@ static void pxa_mask_low_irq(unsigned int irq) { - ICMR &= ~(1 << (irq + PXA_IRQ_SKIP)); + ICMR &= ~(1 << irq); } static void pxa_unmask_low_irq(unsigned int irq) { - ICMR |= (1 << (irq + PXA_IRQ_SKIP)); + ICMR |= (1 << irq); } static int pxa_set_wake(unsigned int irq, unsigned int on) @@ -67,7 +67,27 @@ static struct irq_chip pxa_internal_chip_low = { .set_wake = pxa_set_wake, }; -#if PXA_INTERNAL_IRQS > 32 +void __init pxa_init_irq_low(void) +{ + int irq; + + /* disable all IRQs */ + ICMR = 0; + + /* all IRQs are IRQ, not FIQ */ + ICLR = 0; + + /* only unmasked interrupts kick us out of idle */ + ICCR = 1; + + for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) { + set_irq_chip(irq, &pxa_internal_chip_low); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } +} + +#ifdef CONFIG_PXA27x /* * This is for the second set of internal IRQs as found on the PXA27x. @@ -75,12 +95,12 @@ static struct irq_chip pxa_internal_chip_low = { static void pxa_mask_high_irq(unsigned int irq) { - ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP)); + ICMR2 &= ~(1 << (irq - 32)); } static void pxa_unmask_high_irq(unsigned int irq) { - ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP)); + ICMR2 |= (1 << (irq - 32)); } static struct irq_chip pxa_internal_chip_high = { @@ -90,6 +110,19 @@ static struct irq_chip pxa_internal_chip_high = { .unmask = pxa_unmask_high_irq, }; +void __init pxa_init_irq_high(void) +{ + int irq; + + ICMR2 = 0; + ICLR2 = 0; + + for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) { + set_irq_chip(irq, &pxa_internal_chip_high); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } +} #endif /* Note that if an input/irq line ever gets changed to an output during @@ -217,7 +250,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) do { loop = 0; - mask = GEDR0 & ~3; + mask = GEDR0 & GPIO_IRQ_mask[0] & ~3; if (mask) { GEDR0 = mask; irq = IRQ_GPIO(2); @@ -233,7 +266,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) loop = 1; } - mask = GEDR1; + mask = GEDR1 & GPIO_IRQ_mask[1]; if (mask) { GEDR1 = mask; irq = IRQ_GPIO(32); @@ -248,7 +281,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) loop = 1; } - mask = GEDR2; + mask = GEDR2 & GPIO_IRQ_mask[2]; if (mask) { GEDR2 = mask; irq = IRQ_GPIO(64); @@ -263,8 +296,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) loop = 1; } -#if PXA_LAST_GPIO >= 96 - mask = GEDR3; + mask = GEDR3 & GPIO_IRQ_mask[3]; if (mask) { GEDR3 = mask; irq = IRQ_GPIO(96); @@ -278,7 +310,6 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) } while (mask); loop = 1; } -#endif } while (loop); } @@ -314,64 +345,27 @@ static struct irq_chip pxa_muxed_gpio_chip = { .set_wake = pxa_set_gpio_wake, }; - -void __init pxa_init_irq(void) +void __init pxa_init_irq_gpio(int gpio_nr) { - int irq; - - /* disable all IRQs */ - ICMR = 0; - - /* all IRQs are IRQ, not FIQ */ - ICLR = 0; + int irq, i; /* clear all GPIO edge detects */ - GFER0 = 0; - GFER1 = 0; - GFER2 = 0; - GRER0 = 0; - GRER1 = 0; - GRER2 = 0; - GEDR0 = GEDR0; - GEDR1 = GEDR1; - GEDR2 = GEDR2; - -#ifdef CONFIG_PXA27x - /* And similarly for the extra regs on the PXA27x */ - ICMR2 = 0; - ICLR2 = 0; - GFER3 = 0; - GRER3 = 0; - GEDR3 = GEDR3; -#endif - - /* only unmasked interrupts kick us out of idle */ - ICCR = 1; + for (i = 0; i < gpio_nr; i += 32) { + GFER(i) = 0; + GRER(i) = 0; + GEDR(i) = GEDR(i); + } /* GPIO 0 and 1 must have their mask bit always set */ GPIO_IRQ_mask[0] = 3; - for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) { - set_irq_chip(irq, &pxa_internal_chip_low); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - -#if PXA_INTERNAL_IRQS > 32 - for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) { - set_irq_chip(irq, &pxa_internal_chip_high); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -#endif - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { set_irq_chip(irq, &pxa_low_gpio_chip); set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) { + for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(gpio_nr); irq++) { set_irq_chip(irq, &pxa_muxed_gpio_chip); set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index e3097664ffe1..26116440a7c9 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -46,6 +46,7 @@ #include <asm/arch/ohci.h> #include "generic.h" +#include "devices.h" static unsigned int lpd270_irq_enabled; @@ -97,7 +98,7 @@ static void __init lpd270_init_irq(void) { int irq; - pxa_init_irq(); + pxa27x_init_irq(); __raw_writew(0, LPD270_INT_MASK); __raw_writew(0, LPD270_INT_STATUS); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6377b2e29ff0..e70048fd00a5 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -48,6 +48,7 @@ #include <asm/arch/mmc.h> #include "generic.h" +#include "devices.h" #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) @@ -103,7 +104,7 @@ static void __init lubbock_init_irq(void) { int irq; - pxa_init_irq(); + pxa25x_init_irq(); /* setup extra lubbock irqs */ for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index ed99a81b98f3..b02c79c7e6a3 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -46,6 +46,7 @@ #include <asm/arch/ohci.h> #include "generic.h" +#include "devices.h" static unsigned long mainstone_irq_enabled; @@ -89,7 +90,7 @@ static void __init mainstone_init_irq(void) { int irq; - pxa_init_irq(); + pxa27x_init_irq(); /* setup extra Mainstone irqs */ for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 6bf15ae73848..e66dbc26add1 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -77,7 +77,6 @@ int pxa_pm_enter(suspend_state_t state) { unsigned long sleep_save[SLEEP_SAVE_SIZE]; unsigned long checksum = 0; - struct timespec delta, rtc; int i; extern void pxa_cpu_pm_enter(suspend_state_t state); @@ -87,11 +86,6 @@ int pxa_pm_enter(suspend_state_t state) iwmmxt_task_disable(NULL); #endif - /* preserve current time */ - rtc.tv_sec = RCNR; - rtc.tv_nsec = 0; - save_time_delta(&delta, &rtc); - SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); @@ -183,10 +177,6 @@ int pxa_pm_enter(suspend_state_t state) RESTORE(PSTR); - /* restore current time */ - rtc.tv_sec = RCNR; - restore_time_delta(&delta, &rtc); - #ifdef DEBUG printk(KERN_DEBUG "*** made it back from resume\n"); #endif @@ -200,40 +190,3 @@ unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); } - -/* - * Called after processes are frozen, but before we shut down devices. - */ -int pxa_pm_prepare(suspend_state_t state) -{ - extern int pxa_cpu_pm_prepare(suspend_state_t state); - - return pxa_cpu_pm_prepare(state); -} - -EXPORT_SYMBOL_GPL(pxa_pm_prepare); - -/* - * Called after devices are re-setup, but before processes are thawed. - */ -int pxa_pm_finish(suspend_state_t state) -{ - return 0; -} - -EXPORT_SYMBOL_GPL(pxa_pm_finish); - -static struct pm_ops pxa_pm_ops = { - .prepare = pxa_pm_prepare, - .enter = pxa_pm_enter, - .finish = pxa_pm_finish, - .valid = pm_valid_only_mem, -}; - -static int __init pxa_pm_init(void) -{ - pm_set_ops(&pxa_pm_ops); - return 0; -} - -device_initcall(pxa_pm_init); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 34fb80b37023..655668d4d0e9 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -45,6 +45,7 @@ #include <asm/mach/sharpsl_param.h> #include "generic.h" +#include "devices.h" #include "sharpsl.h" static struct resource poodle_scoop_resources[] = { @@ -412,7 +413,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa25x_init_irq, .timer = &pxa_timer, .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index c1f21739bf71..f36ca448338e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -19,12 +19,17 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/pm.h> #include <asm/hardware.h> +#include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pm.h> +#include <asm/arch/dma.h> #include "generic.h" +#include "devices.h" /* * Various clock factors driven by the CCCR register. @@ -105,18 +110,6 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz); #ifdef CONFIG_PM -int pxa_cpu_pm_prepare(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - break; - default: - return -EINVAL; - } - - return 0; -} - void pxa_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_suspend(unsigned int); @@ -133,4 +126,49 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } +static struct pm_ops pxa25x_pm_ops = { + .enter = pxa_pm_enter, + .valid = pm_valid_only_mem, +}; +#endif + +void __init pxa25x_init_irq(void) +{ + pxa_init_irq_low(); + pxa_init_irq_gpio(85); +} + +static struct platform_device *pxa25x_devices[] __initdata = { + &pxamci_device, + &pxaudc_device, + &pxafb_device, + &ffuart_device, + &btuart_device, + &stuart_device, + &pxai2c_device, + &pxai2s_device, + &pxaficp_device, + &pxartc_device, +}; + +static int __init pxa25x_init(void) +{ + int ret = 0; + + if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + if ((ret = pxa_init_dma(16))) + return ret; +#ifdef CONFIG_PM + pm_set_ops(&pxa25x_pm_ops); #endif + ret = platform_add_devices(pxa25x_devices, + ARRAY_SIZE(pxa25x_devices)); + } + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ + if (cpu_is_pxa25x()) + ret = platform_device_register(&hwuart_device); + + return ret; +} + +subsys_initcall(pxa25x_init); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 1939acc3f9f7..aa5bb02c897b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -19,10 +19,14 @@ #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/ohci.h> +#include <asm/arch/pm.h> +#include <asm/arch/dma.h> #include "generic.h" +#include "devices.h" /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 @@ -122,17 +126,6 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz); #ifdef CONFIG_PM -int pxa_cpu_pm_prepare(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - case PM_SUSPEND_STANDBY: - return 0; - default: - return -EINVAL; - } -} - void pxa_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); @@ -162,6 +155,15 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } +static int pxa27x_pm_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; +} + +static struct pm_ops pxa27x_pm_ops = { + .enter = pxa_pm_enter, + .valid = pxa27x_pm_valid, +}; #endif /* @@ -183,7 +185,7 @@ static struct resource pxa27x_ohci_resources[] = { }, }; -static struct platform_device ohci_device = { +static struct platform_device pxaohci_device = { .name = "pxa27x-ohci", .id = -1, .dev = { @@ -196,16 +198,62 @@ static struct platform_device ohci_device = { void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) { - ohci_device.dev.platform_data = info; + pxaohci_device.dev.platform_data = info; } +static struct resource i2c_power_resources[] = { + { + .start = 0x40f00180, + .end = 0x40f001a3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PWRI2C, + .end = IRQ_PWRI2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pxai2c_power_device = { + .name = "pxa2xx-i2c", + .id = 1, + .resource = i2c_power_resources, + .num_resources = ARRAY_SIZE(i2c_power_resources), +}; + static struct platform_device *devices[] __initdata = { - &ohci_device, + &pxamci_device, + &pxaudc_device, + &pxafb_device, + &ffuart_device, + &btuart_device, + &stuart_device, + &pxai2c_device, + &pxai2c_power_device, + &pxai2s_device, + &pxaficp_device, + &pxartc_device, + &pxaohci_device, }; +void __init pxa27x_init_irq(void) +{ + pxa_init_irq_low(); + pxa_init_irq_high(); + pxa_init_irq_gpio(128); +} + static int __init pxa27x_init(void) { - return platform_add_devices(devices, ARRAY_SIZE(devices)); + int ret = 0; + if (cpu_is_pxa27x()) { + if ((ret = pxa_init_dma(32))) + return ret; +#ifdef CONFIG_PM + pm_set_ops(&pxa27x_pm_ops); +#endif + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + } + return ret; } subsys_initcall(pxa27x_init); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 3cbac63bed3c..bae47e145de8 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -48,6 +48,7 @@ #include <asm/hardware/scoop.h> #include "generic.h" +#include "devices.h" #include "sharpsl.h" /* @@ -560,7 +561,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_spitz, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa27x_init_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -572,7 +573,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_spitz, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa27x_init_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -584,7 +585,7 @@ MACHINE_START(AKITA, "SHARP Akita") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_spitz, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa27x_init_irq, .init_machine = akita_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 5248abe334d2..6f91fd2d061a 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -30,11 +30,6 @@ #include <asm/arch/pxa-regs.h> -static inline unsigned long pxa_get_rtc_time(void) -{ - return RCNR; -} - static int pxa_set_rtc(void) { unsigned long current_time = xtime.tv_sec; @@ -122,10 +117,6 @@ static void __init pxa_timer_init(void) set_rtc = pxa_set_rtc; - tv.tv_nsec = 0; - tv.tv_sec = pxa_get_rtc_time(); - do_settimeofday(&tv); - OIER = 0; /* disable any timer interrupts */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 72738771fb57..240fd042083d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -42,7 +42,7 @@ #include <asm/mach/sharpsl_param.h> #include "generic.h" - +#include "devices.h" /* * SCOOP Device @@ -332,7 +332,7 @@ MACHINE_START(TOSA, "SHARP Tosa") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_tosa, .map_io = pxa_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa25x_init_irq, .init_machine = tosa_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 28c79bd0a3a0..e4ba43bdf85d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -49,6 +49,7 @@ #include <asm/arch/ohci.h> #include "generic.h" +#include "devices.h" /******************************************************************************************** * ONBOARD FLASH @@ -503,7 +504,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, - .init_irq = pxa_init_irq, + .init_irq = pxa27x_init_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index f01de807b72f..8b52ea95d4f6 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -20,6 +20,8 @@ #include <linux/platform_device.h> #include <linux/dm9000.h> +#include <net/ax88796.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -409,6 +411,61 @@ static struct s3c2410_platform_i2c bast_i2c_info = { .max_freq = 130*1000, }; +/* Asix AX88796 10/100 ethernet controller */ + +static struct ax_plat_data bast_asix_platdata = { + .flags = AXFLG_MAC_FROMDEV, + .wordlength = 2, + .dcr_val = 0x48, + .rcr_val = 0x40, +}; + +static struct resource bast_asix_resource[] = { + [0] = { + .start = S3C2410_CS5 + BAST_PA_ASIXNET, + .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), + .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_ASIX, + .end = IRQ_ASIX, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device bast_device_asix = { + .name = "ax88796", + .id = 0, + .num_resources = ARRAY_SIZE(bast_asix_resource), + .resource = bast_asix_resource, + .dev = { + .platform_data = &bast_asix_platdata + } +}; + +/* Asix AX88796 10/100 ethernet controller parallel port */ + +static struct resource bast_asixpp_resource[] = { + [0] = { + .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), + .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device bast_device_axpp = { + .name = "ax88796-pp", + .id = 0, + .num_resources = ARRAY_SIZE(bast_asixpp_resource), + .resource = bast_asixpp_resource, +}; + +/* LCD/VGA controller */ static struct s3c2410fb_mach_info __initdata bast_lcd_info = { .width = 640, @@ -453,6 +510,8 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_nand, &bast_device_nor, &bast_device_dm9k, + &bast_device_asix, + &bast_device_axpp, &bast_sio, }; diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index bff7ddd06a52..29c163d300d4 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -18,6 +18,9 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/sm501.h> +#include <linux/sm501-regs.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -42,6 +45,8 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <net/ax88796.h> + #include <asm/plat-s3c24xx/clock.h> #include <asm/plat-s3c24xx/devs.h> #include <asm/plat-s3c24xx/cpu.h> @@ -153,6 +158,29 @@ static struct mtd_partition anubis_default_nand_part[] = { } }; +static struct mtd_partition anubis_default_nand_part_large[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_128K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_128K, + .offset = SZ_128K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + /* the Anubis has 3 selectable slots for nand-flash, the two * on-board chip areas, as well as the external slot. * @@ -260,6 +288,104 @@ static struct platform_device anubis_device_ide1 = { .resource = anubis_ide1_resource, }; +/* Asix AX88796 10/100 ethernet controller */ + +static struct ax_plat_data anubis_asix_platdata = { + .flags = AXFLG_MAC_FROMDEV, + .wordlength = 2, + .dcr_val = 0x48, + .rcr_val = 0x40, +}; + +static struct resource anubis_asix_resource[] = { + [0] = { + .start = S3C2410_CS5, + .end = S3C2410_CS5 + (0x20 * 0x20) -1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = IRQ_ASIX, + .end = IRQ_ASIX, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device anubis_device_asix = { + .name = "ax88796", + .id = 0, + .num_resources = ARRAY_SIZE(anubis_asix_resource), + .resource = anubis_asix_resource, + .dev = { + .platform_data = &anubis_asix_platdata, + } +}; + +/* SM501 */ + +static struct resource anubis_sm501_resource[] = { + [0] = { + .start = S3C2410_CS2, + .end = S3C2410_CS2 + SZ_8M, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C2410_CS2 + SZ_64M - SZ_2M, + .end = S3C2410_CS2 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_EINT0, + .end = IRQ_EINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sm501_initdata anubis_sm501_initdata = { + .gpio_high = { + .set = 0x3F000000, /* 24bit panel */ + .mask = 0x0, + }, + .misc_timing = { + .set = 0x010100, /* SDRAM timing */ + .mask = 0x1F1F00, + }, + .misc_control = { + .set = SM501_MISC_PNL_24BIT, + .mask = 0, + }, + + /* set the SDRAM and bus clocks */ + .mclk = 72 * MHZ, + .m1xclk = 144 * MHZ, +}; + +static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = { + [0] = { + .pin_scl = 44, + .pin_sda = 45, + }, + [1] = { + .pin_scl = 40, + .pin_sda = 41, + }, +}; + +static struct sm501_platdata anubis_sm501_platdata = { + .init = &anubis_sm501_initdata, + .gpio_i2c = anubis_sm501_gpio_i2c, + .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c), +}; + +static struct platform_device anubis_device_sm501 = { + .name = "sm501", + .id = 0, + .num_resources = ARRAY_SIZE(anubis_sm501_resource), + .resource = anubis_sm501_resource, + .dev = { + .platform_data = &anubis_sm501_platdata, + }, +}; + /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { @@ -271,6 +397,8 @@ static struct platform_device *anubis_devices[] __initdata = { &s3c_device_nand, &anubis_device_ide0, &anubis_device_ide1, + &anubis_device_asix, + &anubis_device_sm501, }; static struct clk *anubis_clocks[] = { @@ -304,8 +432,17 @@ static void __init anubis_map_io(void) s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); - /* ensure that the GPIO is setup */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); + /* check for the newer revision boards with large page nand */ + + if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) { + printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", + __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK); + anubis_nand_sets[0].partitions = anubis_default_nand_part_large; + anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); + } else { + /* ensure that the GPIO is setup */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); + } } static void __init anubis_init(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 15811601f03d..89f4c9c5777b 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -166,6 +166,29 @@ static struct mtd_partition osiris_default_nand_part[] = { } }; +static struct mtd_partition osiris_default_nand_part_large[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_128K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_128K, + .offset = SZ_128K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + /* the Osiris has 3 selectable slots for nand-flash, the two * on-board chip areas, as well as the external slot. * @@ -322,14 +345,23 @@ static void __init osiris_map_io(void) s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + /* check for the newer revision boards with large page nand */ + + if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) { + printk(KERN_INFO "OSIRIS-B detected (revision %d)\n", + __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK); + osiris_nand_sets[0].partitions = osiris_default_nand_part_large; + osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large); + } else { + /* write-protect line to the NAND */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); + } + /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ local_irq_save(flags); __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); local_irq_restore(flags); - - /* write-protect line to the NAND */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); } static void __init osiris_init(void) diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 4cbf9468f654..3a0a1ee2542d 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -185,28 +185,21 @@ static int __devinit neponset_probe(struct platform_device *dev) /* * LDM power management. */ +static unsigned int neponset_saved_state; + static int neponset_suspend(struct platform_device *dev, pm_message_t state) { /* * Save state. */ - if (!dev->dev.power.saved_state) - dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); - if (!dev->dev.power.saved_state) - return -ENOMEM; - - *(unsigned int *)dev->dev.power.saved_state = NCR_0; + neponset_saved_state = NCR_0; return 0; } static int neponset_resume(struct platform_device *dev) { - if (dev->dev.power.saved_state) { - NCR_0 = *(unsigned int *)dev->dev.power.saved_state; - kfree(dev->dev.power.saved_state); - dev->dev.power.saved_state = NULL; - } + NCR_0 = neponset_saved_state; return 0; } diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index d674cf343156..01a37d3c0727 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -57,12 +57,7 @@ enum { SLEEP_SAVE_SP = 0, static int sa11x0_pm_enter(suspend_state_t state) { unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE]; - struct timespec delta, rtc; - /* preserve current time */ - rtc.tv_sec = RCNR; - rtc.tv_nsec = 0; - save_time_delta(&delta, &rtc); gpio = GPLR; /* save vital registers */ @@ -119,10 +114,6 @@ static int sa11x0_pm_enter(suspend_state_t state) */ PSSR = PSSR_PH; - /* restore current time */ - rtc.tv_sec = RCNR; - restore_time_delta(&delta, &rtc); - return 0; } diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 29cb0c1604ab..fdf7b016e7ad 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -21,25 +21,6 @@ #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 -static unsigned long __init sa1100_get_rtc_time(void) -{ - /* - * According to the manual we should be able to let RTTR be zero - * and then a default divisor for a 32.768KHz clock is used. - * Apparently this doesn't work, at least for my SA1110 rev 5. - * If the clock divider is uninitialized then reset it to the - * default value to get the 1Hz clock. - */ - if (RTTR == 0) { - RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - printk(KERN_WARNING "Warning: uninitialized Real Time Clock\n"); - /* The current RTC value probably doesn't make sense either */ - RCNR = 0; - return 0; - } - return RCNR; -} - static int sa1100_set_rtc(void) { unsigned long current_time = xtime.tv_sec; @@ -117,15 +98,10 @@ static struct irqaction sa1100_timer_irq = { static void __init sa1100_timer_init(void) { - struct timespec tv; unsigned long flags; set_rtc = sa1100_set_rtc; - tv.tv_nsec = 0; - tv.tv_sec = sa1100_get_rtc_time(); - do_settimeofday(&tv); - OIER = 0; /* disable any timer interrupts */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &sa1100_timer_irq); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index f3ade18862aa..75952779ce19 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -280,7 +280,10 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, if (!type) return NULL; - size = PAGE_ALIGN(size); + /* + * Page align the mapping size, taking account of any offset. + */ + size = PAGE_ALIGN(offset + size); area = get_vm_area(size, VM_IOREMAP); if (!area) @@ -325,11 +328,6 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) if (!size || last_addr < phys_addr) return NULL; - /* - * Page align the mapping size - */ - size = PAGE_ALIGN(last_addr + 1) - phys_addr; - return __arm_ioremap_pfn(pfn, offset, size, mtype); } EXPORT_SYMBOL(__arm_ioremap); diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 4d2b1da3cd82..36bff0325959 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_IOP32X) += setup.o obj-$(CONFIG_ARCH_IOP32X) += time.o obj-$(CONFIG_ARCH_IOP32X) += io.o obj-$(CONFIG_ARCH_IOP32X) += cp6.o +obj-$(CONFIG_ARCH_IOP32X) += adma.o # IOP33X obj-$(CONFIG_ARCH_IOP33X) += gpio.o @@ -21,6 +22,7 @@ obj-$(CONFIG_ARCH_IOP33X) += setup.o obj-$(CONFIG_ARCH_IOP33X) += time.o obj-$(CONFIG_ARCH_IOP33X) += io.o obj-$(CONFIG_ARCH_IOP33X) += cp6.o +obj-$(CONFIG_ARCH_IOP33X) += adma.o # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c new file mode 100644 index 000000000000..53c5e9a52eb1 --- /dev/null +++ b/arch/arm/plat-iop/adma.c @@ -0,0 +1,209 @@ +/* + * platform device definitions for the iop3xx dma/xor engines + * Copyright © 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#include <linux/platform_device.h> +#include <asm/hardware/iop3xx.h> +#include <linux/dma-mapping.h> +#include <asm/arch/adma.h> +#include <asm/hardware/iop_adma.h> + +#ifdef CONFIG_ARCH_IOP32X +#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT +#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC +#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR + +#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT +#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC +#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR + +#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT +#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC +#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR +#endif +#ifdef CONFIG_ARCH_IOP33X +#define IRQ_DMA0_EOT IRQ_IOP33X_DMA0_EOT +#define IRQ_DMA0_EOC IRQ_IOP33X_DMA0_EOC +#define IRQ_DMA0_ERR IRQ_IOP33X_DMA0_ERR + +#define IRQ_DMA1_EOT IRQ_IOP33X_DMA1_EOT +#define IRQ_DMA1_EOC IRQ_IOP33X_DMA1_EOC +#define IRQ_DMA1_ERR IRQ_IOP33X_DMA1_ERR + +#define IRQ_AA_EOT IRQ_IOP33X_AA_EOT +#define IRQ_AA_EOC IRQ_IOP33X_AA_EOC +#define IRQ_AA_ERR IRQ_IOP33X_AA_ERR +#endif +/* AAU and DMA Channels */ +static struct resource iop3xx_dma_0_resources[] = { + [0] = { + .start = IOP3XX_DMA_PHYS_BASE(0), + .end = IOP3XX_DMA_UPPER_PA(0), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DMA0_EOT, + .end = IRQ_DMA0_EOT, + .flags = IORESOURCE_IRQ + }, + [2] = { + .start = IRQ_DMA0_EOC, + .end = IRQ_DMA0_EOC, + .flags = IORESOURCE_IRQ + }, + [3] = { + .start = IRQ_DMA0_ERR, + .end = IRQ_DMA0_ERR, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop3xx_dma_1_resources[] = { + [0] = { + .start = IOP3XX_DMA_PHYS_BASE(1), + .end = IOP3XX_DMA_UPPER_PA(1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DMA1_EOT, + .end = IRQ_DMA1_EOT, + .flags = IORESOURCE_IRQ + }, + [2] = { + .start = IRQ_DMA1_EOC, + .end = IRQ_DMA1_EOC, + .flags = IORESOURCE_IRQ + }, + [3] = { + .start = IRQ_DMA1_ERR, + .end = IRQ_DMA1_ERR, + .flags = IORESOURCE_IRQ + } +}; + + +static struct resource iop3xx_aau_resources[] = { + [0] = { + .start = IOP3XX_AAU_PHYS_BASE, + .end = IOP3XX_AAU_UPPER_PA, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_AA_EOT, + .end = IRQ_AA_EOT, + .flags = IORESOURCE_IRQ + }, + [2] = { + .start = IRQ_AA_EOC, + .end = IRQ_AA_EOC, + .flags = IORESOURCE_IRQ + }, + [3] = { + .start = IRQ_AA_ERR, + .end = IRQ_AA_ERR, + .flags = IORESOURCE_IRQ + } +}; + +static u64 iop3xx_adma_dmamask = DMA_32BIT_MASK; + +static struct iop_adma_platform_data iop3xx_dma_0_data = { + .hw_id = DMA0_ID, + .pool_size = PAGE_SIZE, +}; + +static struct iop_adma_platform_data iop3xx_dma_1_data = { + .hw_id = DMA1_ID, + .pool_size = PAGE_SIZE, +}; + +static struct iop_adma_platform_data iop3xx_aau_data = { + .hw_id = AAU_ID, + .pool_size = 3 * PAGE_SIZE, +}; + +struct platform_device iop3xx_dma_0_channel = { + .name = "iop-adma", + .id = 0, + .num_resources = 4, + .resource = iop3xx_dma_0_resources, + .dev = { + .dma_mask = &iop3xx_adma_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *) &iop3xx_dma_0_data, + }, +}; + +struct platform_device iop3xx_dma_1_channel = { + .name = "iop-adma", + .id = 1, + .num_resources = 4, + .resource = iop3xx_dma_1_resources, + .dev = { + .dma_mask = &iop3xx_adma_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *) &iop3xx_dma_1_data, + }, +}; + +struct platform_device iop3xx_aau_channel = { + .name = "iop-adma", + .id = 2, + .num_resources = 4, + .resource = iop3xx_aau_resources, + .dev = { + .dma_mask = &iop3xx_adma_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *) &iop3xx_aau_data, + }, +}; + +static int __init iop3xx_adma_cap_init(void) +{ + #ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */ + dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask); + dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask); + #else + dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask); + dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_0_data.cap_mask); + dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask); + #endif + + #ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */ + dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask); + dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask); + #else + dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask); + dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_1_data.cap_mask); + dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask); + #endif + + #ifdef CONFIG_ARCH_IOP32X /* the 32x AAU does not perform zero sum */ + dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); + #else + dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); + #endif + + return 0; +} + +arch_initcall(iop3xx_adma_cap_init); diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index 20688bc13e9b..9044f33299f7 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -17,6 +17,9 @@ config MMU bool default y +config NO_DMA + def_bool y + config ARCH_ACORN bool default y diff --git a/arch/arm26/defconfig b/arch/arm26/defconfig index c4a89703c3d8..2b7d44bf49bf 100644 --- a/arch/arm26/defconfig +++ b/arch/arm26/defconfig @@ -248,7 +248,6 @@ CONFIG_I2C_CHARDEV=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set -# CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set diff --git a/arch/arm26/mm/init.c b/arch/arm26/mm/init.c index 562fac12eb95..36e7ee3f8321 100644 --- a/arch/arm26/mm/init.c +++ b/arch/arm26/mm/init.c @@ -33,9 +33,6 @@ #include <asm/map.h> - -#define TABLE_SIZE PTRS_PER_PTE * sizeof(pte_t)) - struct mmu_gather mmu_gathers[NR_CPUS]; extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index 86d107511dd4..aaa792815cd7 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -184,7 +184,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs) if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) { enum bug_trap_type type; - type = report_bug(regs->pc); + type = report_bug(regs->pc, regs); switch (type) { case BUG_TRAP_TYPE_NONE: break; diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index d98bafcaca59..017defaa525b 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -71,6 +71,7 @@ config GENERIC_CALIBRATE_DELAY config IRQCHIP_DEMUX_GPIO bool + depends on (BF53x || BF561 || BF54x) default y source "init/Kconfig" @@ -114,6 +115,26 @@ config BF537 help BF537 Processor Support. +config BF542 + bool "BF542" + help + BF542 Processor Support. + +config BF544 + bool "BF544" + help + BF544 Processor Support. + +config BF548 + bool "BF548" + help + BF548 Processor Support. + +config BF549 + bool "BF549" + help + BF549 Processor Support. + config BF561 bool "BF561" help @@ -125,6 +146,11 @@ choice prompt "Silicon Rev" default BF_REV_0_2 if BF537 default BF_REV_0_3 if BF533 + default BF_REV_0_0 if BF549 + +config BF_REV_0_0 + bool "0.0" + depends on (BF549) config BF_REV_0_2 bool "0.2" @@ -150,6 +176,16 @@ config BF_REV_NONE endchoice +config BF53x + bool + depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) + default y + +config BF54x + bool + depends on (BF542 || BF544 || BF548 || BF549) + default y + config BFIN_DUAL_CORE bool depends on (BF561) @@ -198,6 +234,12 @@ config BFIN537_BLUETECHNIX_CM help CM-BF537 support for EVAL- and DEV-Board. +config BFIN548_EZKIT + bool "BF548-EZKIT" + depends on (BF548 || BF549) + help + BFIN548-EZKIT board Support. + config BFIN561_BLUETECHNIX_CM bool "Bluetechnix CM-BF561" depends on (BF561) @@ -265,6 +307,7 @@ config BFIN_SHARED_FLASH_ENET source "arch/blackfin/mach-bf533/Kconfig" source "arch/blackfin/mach-bf561/Kconfig" source "arch/blackfin/mach-bf537/Kconfig" +source "arch/blackfin/mach-bf548/Kconfig" menu "Board customizations" @@ -497,7 +540,8 @@ config IP_CHECKSUM_L1 config CACHELINE_ALIGNED_L1 bool "Locate cacheline_aligned data to L1 Data Memory" - default y + default y if !BF54x + default n if BF54x depends on !BF531 help If enabled cacheline_anligned data is linked @@ -541,9 +585,17 @@ endchoice source "mm/Kconfig" +config LARGE_ALLOCS + bool "Allow allocating large blocks (> 1MB) of memory" + help + Allow the slab memory allocator to keep chains for very large + memory sizes - upto 32MB. You may need this if your system has + a lot of RAM, and you need to able to allocate very large + contiguous chunks. If unsure, say N. + config BFIN_DMA_5XX bool "Enable DMA Support" - depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561) + depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x) default y help DMA driver for BF5xx. @@ -686,6 +738,7 @@ config C_AMCKEN config C_CDPRIO bool "DMA has priority over core for ext. accesses" + depends on !BF54x default n config C_B0PEN @@ -839,7 +892,7 @@ endchoice endmenu -if (BF537 || BF533) +if (BF537 || BF533 || BF54x) menu "CPU Frequency scaling" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 6971a4418dfe..1b75672dfc8f 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533 machine-$(CONFIG_BF534) := bf537 machine-$(CONFIG_BF536) := bf537 machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index 49e8098d4c21..8cd33560e817 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -13,7 +13,8 @@ extra-y += vmlinux.bin vmlinux.gz quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C gzip -a $(CONFIG_BOOT_LOAD) -e $(CONFIG_BOOT_LOAD) -n 'Linux-$(KERNELRELEASE)' \ + -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ + -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ -d $< $@ $(obj)/vmlinux.bin: vmlinux FORCE diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig new file mode 100644 index 000000000000..ac8390fafa9c --- /dev/null +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -0,0 +1,1100 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21.5 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF548 is not set +CONFIG_BF549=y +# CONFIG_BF561 is not set +CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF54x=y +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +CONFIG_BFIN548_EZKIT=y +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BOARD is not set +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_TIMER0=11 +CONFIG_IRQ_TIMER1=11 +CONFIG_IRQ_TIMER2=11 +CONFIG_IRQ_TIMER3=11 +CONFIG_IRQ_TIMER4=11 +CONFIG_IRQ_TIMER5=11 +CONFIG_IRQ_TIMER6=11 +CONFIG_IRQ_TIMER7=11 +CONFIG_IRQ_TIMER8=11 +CONFIG_IRQ_TIMER9=11 +CONFIG_IRQ_TIMER10=11 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 + +# +# BF548 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMAC0_ERR=7 +CONFIG_IRQ_EPPI0_ERR=7 +CONFIG_IRQ_SPORT0_ERR=7 +CONFIG_IRQ_SPORT1_ERR=7 +CONFIG_IRQ_SPI0_ERR=7 +CONFIG_IRQ_UART0_ERR=7 +CONFIG_IRQ_EPPI0=8 +CONFIG_IRQ_SPI0=10 +CONFIG_IRQ_PINT0=12 +CONFIG_IRQ_PINT1=12 +CONFIG_IRQ_MDMAS0=13 +CONFIG_IRQ_MDMAS1=13 +CONFIG_IRQ_WATCHDOG=13 +CONFIG_IRQ_DMAC1_ERR=7 +CONFIG_IRQ_SPORT2_ERR=7 +CONFIG_IRQ_SPORT3_ERR=7 +CONFIG_IRQ_MXVR_DATA=7 +CONFIG_IRQ_SPI1_ERR=7 +CONFIG_IRQ_SPI2_ERR=7 +CONFIG_IRQ_UART1_ERR=7 +CONFIG_IRQ_UART2_ERR=7 +CONFIG_IRQ_CAN0_ERR=7 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_EPPI1=9 +CONFIG_IRQ_EPPI2=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_ATAPI_RX=10 +CONFIG_IRQ_ATAPI_TX=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 +CONFIG_IRQ_CAN0_RX=11 +CONFIG_IRQ_CAN0_TX=11 +CONFIG_IRQ_MDMAS2=13 +CONFIG_IRQ_MDMAS3=13 +CONFIG_IRQ_MXVR_ERR=11 +CONFIG_IRQ_MXVR_MSG=11 +CONFIG_IRQ_MXVR_PKT=11 +CONFIG_IRQ_EPPI1_ERR=7 +CONFIG_IRQ_EPPI2_ERR=7 +CONFIG_IRQ_UART3_ERR=7 +CONFIG_IRQ_HOST_ERR=7 +CONFIG_IRQ_PIXC_ERR=7 +CONFIG_IRQ_NFC_ERR=7 +CONFIG_IRQ_ATAPI_ERR=7 +CONFIG_IRQ_CAN1_ERR=7 +CONFIG_IRQ_HS_DMA_ERR=7 +CONFIG_IRQ_PIXC_IN0=8 +CONFIG_IRQ_PIXC_IN1=8 +CONFIG_IRQ_PIXC_OUT=8 +CONFIG_IRQ_SDH=8 +CONFIG_IRQ_CNT=8 +CONFIG_IRQ_KEY=8 +CONFIG_IRQ_CAN1_RX=11 +CONFIG_IRQ_CAN1_TX=11 +CONFIG_IRQ_SDH_MASK0=11 +CONFIG_IRQ_SDH_MASK1=11 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 +CONFIG_IRQ_OTPSEC=11 +CONFIG_IRQ_PINT2=11 +CONFIG_IRQ_PINT3=11 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Board Setup +# +CONFIG_CLKIN_HZ=25000000 +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set +# CONFIG_BLKFIN_CACHE_LOCK is not set +# CONFIG_BLKFIN_WB is not set +CONFIG_BLKFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_BF5xx is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_BF53X_PFBUTTONS is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_BF5xx_FBDMA is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y +# CONFIG_SERIAL_BFIN_UART0 is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART2 is not set +# CONFIG_SERIAL_BFIN_UART3 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_HWERR=y +# CONFIG_DEBUG_ICACHE_CHECK is not set +# CONFIG_DEBUG_KERNEL_START is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index f3b7d2f9d49c..f429ebc3a961 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -6,9 +6,12 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ - sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \ - flat.o + sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ + fixed_code.o cplbinit.o cacheinit.o +obj-$(CONFIG_BF53x) += bfin_gpio.o +obj-$(CONFIG_BF561) += bfin_gpio.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o +obj-$(CONFIG_KGDB) += kgdb.o diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c index e455f4504509..b56b2741cdea 100644 --- a/arch/blackfin/kernel/asm-offsets.c +++ b/arch/blackfin/kernel/asm-offsets.c @@ -32,11 +32,10 @@ #include <linux/kernel_stat.h> #include <linux/ptrace.h> #include <linux/hardirq.h> -#include <asm/irq.h> -#include <asm/thread_info.h> +#include <linux/irq.h> +#include <linux/thread_info.h> -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) +#define DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val)) int main(void) { diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 069a896a8f26..7cf02f02a1db 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -34,6 +34,7 @@ #include <linux/kernel.h> #include <linux/param.h> +#include <asm/blackfin.h> #include <asm/dma.h> #include <asm/cacheflush.h> @@ -45,67 +46,6 @@ ***************************************************************************/ static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL]; -#if defined (CONFIG_BF561) -static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { - (struct dma_register *) DMA1_0_NEXT_DESC_PTR, - (struct dma_register *) DMA1_1_NEXT_DESC_PTR, - (struct dma_register *) DMA1_2_NEXT_DESC_PTR, - (struct dma_register *) DMA1_3_NEXT_DESC_PTR, - (struct dma_register *) DMA1_4_NEXT_DESC_PTR, - (struct dma_register *) DMA1_5_NEXT_DESC_PTR, - (struct dma_register *) DMA1_6_NEXT_DESC_PTR, - (struct dma_register *) DMA1_7_NEXT_DESC_PTR, - (struct dma_register *) DMA1_8_NEXT_DESC_PTR, - (struct dma_register *) DMA1_9_NEXT_DESC_PTR, - (struct dma_register *) DMA1_10_NEXT_DESC_PTR, - (struct dma_register *) DMA1_11_NEXT_DESC_PTR, - (struct dma_register *) DMA2_0_NEXT_DESC_PTR, - (struct dma_register *) DMA2_1_NEXT_DESC_PTR, - (struct dma_register *) DMA2_2_NEXT_DESC_PTR, - (struct dma_register *) DMA2_3_NEXT_DESC_PTR, - (struct dma_register *) DMA2_4_NEXT_DESC_PTR, - (struct dma_register *) DMA2_5_NEXT_DESC_PTR, - (struct dma_register *) DMA2_6_NEXT_DESC_PTR, - (struct dma_register *) DMA2_7_NEXT_DESC_PTR, - (struct dma_register *) DMA2_8_NEXT_DESC_PTR, - (struct dma_register *) DMA2_9_NEXT_DESC_PTR, - (struct dma_register *) DMA2_10_NEXT_DESC_PTR, - (struct dma_register *) DMA2_11_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, -}; -#else -static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { - (struct dma_register *) DMA0_NEXT_DESC_PTR, - (struct dma_register *) DMA1_NEXT_DESC_PTR, - (struct dma_register *) DMA2_NEXT_DESC_PTR, - (struct dma_register *) DMA3_NEXT_DESC_PTR, - (struct dma_register *) DMA4_NEXT_DESC_PTR, - (struct dma_register *) DMA5_NEXT_DESC_PTR, - (struct dma_register *) DMA6_NEXT_DESC_PTR, - (struct dma_register *) DMA7_NEXT_DESC_PTR, -#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536)) - (struct dma_register *) DMA8_NEXT_DESC_PTR, - (struct dma_register *) DMA9_NEXT_DESC_PTR, - (struct dma_register *) DMA10_NEXT_DESC_PTR, - (struct dma_register *) DMA11_NEXT_DESC_PTR, -#endif - (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, - (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, - (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, - (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, -}; -#endif /*------------------------------------------------------------------------------ * Set the Buffer Clear bit in the Configuration register of specific DMA @@ -138,149 +78,6 @@ static int __init blackfin_dma_init(void) arch_initcall(blackfin_dma_init); -/* - * Form the channel find the irq number for that channel. - */ -#if !defined(CONFIG_BF561) - -static int bf533_channel2irq(unsigned int channel) -{ - int ret_irq = -1; - - switch (channel) { - case CH_PPI: - ret_irq = IRQ_PPI; - break; - -#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536)) - case CH_EMAC_RX: - ret_irq = IRQ_MAC_RX; - break; - - case CH_EMAC_TX: - ret_irq = IRQ_MAC_TX; - break; - - case CH_UART1_RX: - ret_irq = IRQ_UART1_RX; - break; - - case CH_UART1_TX: - ret_irq = IRQ_UART1_TX; - break; -#endif - - case CH_SPORT0_RX: - ret_irq = IRQ_SPORT0_RX; - break; - - case CH_SPORT0_TX: - ret_irq = IRQ_SPORT0_TX; - break; - - case CH_SPORT1_RX: - ret_irq = IRQ_SPORT1_RX; - break; - - case CH_SPORT1_TX: - ret_irq = IRQ_SPORT1_TX; - break; - - case CH_SPI: - ret_irq = IRQ_SPI; - break; - - case CH_UART_RX: - ret_irq = IRQ_UART_RX; - break; - - case CH_UART_TX: - ret_irq = IRQ_UART_TX; - break; - - case CH_MEM_STREAM0_SRC: - case CH_MEM_STREAM0_DEST: - ret_irq = IRQ_MEM_DMA0; - break; - - case CH_MEM_STREAM1_SRC: - case CH_MEM_STREAM1_DEST: - ret_irq = IRQ_MEM_DMA1; - break; - } - return ret_irq; -} - -# define channel2irq(channel) bf533_channel2irq(channel) - -#else - -static int bf561_channel2irq(unsigned int channel) -{ - int ret_irq = -1; - - switch (channel) { - case CH_PPI0: - ret_irq = IRQ_PPI0; - break; - case CH_PPI1: - ret_irq = IRQ_PPI1; - break; - case CH_SPORT0_RX: - ret_irq = IRQ_SPORT0_RX; - break; - case CH_SPORT0_TX: - ret_irq = IRQ_SPORT0_TX; - break; - case CH_SPORT1_RX: - ret_irq = IRQ_SPORT1_RX; - break; - case CH_SPORT1_TX: - ret_irq = IRQ_SPORT1_TX; - break; - case CH_SPI: - ret_irq = IRQ_SPI; - break; - case CH_UART_RX: - ret_irq = IRQ_UART_RX; - break; - case CH_UART_TX: - ret_irq = IRQ_UART_TX; - break; - - case CH_MEM_STREAM0_SRC: - case CH_MEM_STREAM0_DEST: - ret_irq = IRQ_MEM_DMA0; - break; - case CH_MEM_STREAM1_SRC: - case CH_MEM_STREAM1_DEST: - ret_irq = IRQ_MEM_DMA1; - break; - case CH_MEM_STREAM2_SRC: - case CH_MEM_STREAM2_DEST: - ret_irq = IRQ_MEM_DMA2; - break; - case CH_MEM_STREAM3_SRC: - case CH_MEM_STREAM3_DEST: - ret_irq = IRQ_MEM_DMA3; - break; - - case CH_IMEM_STREAM0_SRC: - case CH_IMEM_STREAM0_DEST: - ret_irq = IRQ_IMEM_DMA0; - break; - case CH_IMEM_STREAM1_SRC: - case CH_IMEM_STREAM1_DEST: - ret_irq = IRQ_IMEM_DMA1; - break; - } - return ret_irq; -} - -# define channel2irq(channel) bf561_channel2irq(channel) - -#endif - /*------------------------------------------------------------------------------ * Request the specific DMA channel from the system. *-----------------------------------------------------------------------------*/ @@ -535,7 +332,7 @@ set_bfin_dma_config(char direction, char flow_mode, } EXPORT_SYMBOL(set_bfin_dma_config); -void set_dma_sg(unsigned int channel, struct dmasg * sg, int nr_sg) +void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg) { BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE && channel < MAX_BLACKFIN_DMA_CHANNEL)); @@ -604,7 +401,7 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) if (size <= 0) return NULL; - + local_irq_save(flags); if ((unsigned long)src < memory_end) @@ -748,7 +545,6 @@ void *dma_memcpy(void *dest, const void *src, size_t size) addr = __dma_memcpy(dest+bulk, src+bulk, rest); return addr; } - EXPORT_SYMBOL(dma_memcpy); void *safe_dma_memcpy(void *dest, const void *src, size_t size) @@ -761,14 +557,13 @@ EXPORT_SYMBOL(safe_dma_memcpy); void dma_outsb(void __iomem *addr, const void *buf, unsigned short len) { - unsigned long flags; - + local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len); - bfin_write_MDMA_D0_START_ADDR(addr); + blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + + bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); bfin_write_MDMA_D0_X_MODIFY(0); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -796,9 +591,9 @@ EXPORT_SYMBOL(dma_outsb); void dma_insb(const void __iomem *addr, void *buf, unsigned short len) { unsigned long flags; - + local_irq_save(flags); - bfin_write_MDMA_D0_START_ADDR(buf); + bfin_write_MDMA_D0_START_ADDR(buf); bfin_write_MDMA_D0_X_COUNT(len); bfin_write_MDMA_D0_X_MODIFY(1); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -827,12 +622,12 @@ EXPORT_SYMBOL(dma_insb); void dma_outsw(void __iomem *addr, const void *buf, unsigned short len) { unsigned long flags; - + local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len); - bfin_write_MDMA_D0_START_ADDR(addr); + blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + + bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); bfin_write_MDMA_D0_X_MODIFY(0); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -859,10 +654,10 @@ EXPORT_SYMBOL(dma_outsw); void dma_insw(const void __iomem *addr, void *buf, unsigned short len) { unsigned long flags; - + local_irq_save(flags); - - bfin_write_MDMA_D0_START_ADDR(buf); + + bfin_write_MDMA_D0_START_ADDR(buf); bfin_write_MDMA_D0_X_COUNT(len); bfin_write_MDMA_D0_X_MODIFY(2); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -891,12 +686,12 @@ EXPORT_SYMBOL(dma_insw); void dma_outsl(void __iomem *addr, const void *buf, unsigned short len) { unsigned long flags; - + local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len); - bfin_write_MDMA_D0_START_ADDR(addr); + blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + + bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); bfin_write_MDMA_D0_X_MODIFY(0); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -923,10 +718,10 @@ EXPORT_SYMBOL(dma_outsl); void dma_insl(const void __iomem *addr, void *buf, unsigned short len) { unsigned long flags; - + local_irq_save(flags); - - bfin_write_MDMA_D0_START_ADDR(buf); + + bfin_write_MDMA_D0_START_ADDR(buf); bfin_write_MDMA_D0_X_COUNT(len); bfin_write_MDMA_D0_X_MODIFY(4); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index bb1f4fb2467c..bafcfa52142b 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -162,7 +162,7 @@ static void port_setup(unsigned short gpio, unsigned short usage) static void default_gpio(unsigned short gpio) { - unsigned short bank,bitmask; + unsigned short bank, bitmask; bank = gpio_bank(gpio); bitmask = gpio_bit(gpio); @@ -183,7 +183,7 @@ static int __init bfin_gpio_init(void) printk(KERN_INFO "Blackfin GPIO Controller\n"); - for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) reserved_map[gpio_bank(i)] = 0; #if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) @@ -478,7 +478,7 @@ u32 gpio_pm_setup(void) u32 sic_iwr = 0; u16 bank, mask, i, gpio; - for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) { + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { mask = wakeup_map[gpio_bank(i)]; bank = gpio_bank(i); @@ -522,12 +522,11 @@ u32 gpio_pm_setup(void) return IWR_ENABLE_ALL; } - void gpio_pm_restore(void) { u16 bank, mask, i; - for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) { + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { mask = wakeup_map[gpio_bank(i)]; bank = gpio_bank(i); @@ -591,7 +590,6 @@ int gpio_request(unsigned short gpio, const char *label) } EXPORT_SYMBOL(gpio_request); - void gpio_free(unsigned short gpio) { unsigned long flags; @@ -616,7 +614,6 @@ void gpio_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_free); - void gpio_direction_input(unsigned short gpio) { unsigned long flags; diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index f64ecb638fab..70455949cfd2 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -28,10 +28,11 @@ */ #include <linux/module.h> -#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/uaccess.h> + #include <asm/checksum.h> #include <asm/cacheflush.h> -#include <asm/uaccess.h> /* platform dependent support */ diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cacheinit.c new file mode 100644 index 000000000000..4d41a40e8133 --- /dev/null +++ b/arch/blackfin/kernel/cacheinit.c @@ -0,0 +1,66 @@ +/* + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/cpu.h> + +#include <asm/cacheflush.h> +#include <asm/blackfin.h> +#include <asm/cplbinit.h> + +#if defined(CONFIG_BLKFIN_CACHE) +void bfin_icache_init(void) +{ + unsigned long *table = icplb_table; + unsigned long ctrl; + int i; + + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long addr = *table++; + unsigned long data = *table++; + if (addr == (unsigned long)-1) + break; + bfin_write32(ICPLB_ADDR0 + i * 4, addr); + bfin_write32(ICPLB_DATA0 + i * 4, data); + } + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= IMC | ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); +} +#endif + +#if defined(CONFIG_BLKFIN_DCACHE) +void bfin_dcache_init(void) +{ + unsigned long *table = dcplb_table; + unsigned long ctrl; + int i; + + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long addr = *table++; + unsigned long data = *table++; + if (addr == (unsigned long)-1) + break; + bfin_write32(DCPLB_ADDR0 + i * 4, addr); + bfin_write32(DCPLB_DATA0 + i * 4, data); + } + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= DMEM_CNTR; + bfin_write_DMEM_CONTROL(ctrl); +} +#endif diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c new file mode 100644 index 000000000000..bbdb403fcb55 --- /dev/null +++ b/arch/blackfin/kernel/cplbinit.c @@ -0,0 +1,433 @@ +/* + * Blackfin CPLB initialization + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/cplbinit.h> + +u_long icplb_table[MAX_CPLBS+1]; +u_long dcplb_table[MAX_CPLBS+1]; + +#ifdef CONFIG_CPLB_SWITCH_TAB_L1 +u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data)); +u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data)); + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data)); +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data)); +#endif /* CONFIG_CPLB_INFO */ + +#else + +u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]; +u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]; + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]; +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]; +#endif /* CONFIG_CPLB_INFO */ + +#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/ + +struct s_cplb { + struct cplb_tab init_i; + struct cplb_tab init_d; + struct cplb_tab switch_i; + struct cplb_tab switch_d; +}; + +#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +static struct cplb_desc cplb_data[] = { + { + .start = 0, + .end = SIZE_1K, + .psize = SIZE_1K, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_OOPS, + .d_conf = SDRAM_OOPS, +#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) + .valid = 1, +#else + .valid = 0, +#endif + .name = "ZERO Pointer Saveguard", + }, + { + .start = L1_CODE_START, + .end = L1_CODE_START + L1_CODE_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | I_CPLB, + .i_conf = L1_IMEMORY, + .d_conf = 0, + .valid = 1, + .name = "L1 I-Memory", + }, + { + .start = L1_DATA_A_START, + .end = L1_DATA_B_START + L1_DATA_B_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = 0, + .d_conf = L1_DMEMORY, +#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) + .valid = 1, +#else + .valid = 0, +#endif + .name = "L1 D-Memory", + }, + { + .start = 0, + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, + .valid = 1, + .name = "SDRAM Kernel", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1, + .name = "SDRAM RAM MTD", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = SIZE_1M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1, + .name = "SDRAM Uncached DMA ZONE", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .i_conf = 0, /* dynamic */ + .d_conf = 0, /* dynamic */ + .valid = 1, + .name = "SDRAM Reserved Memory", + }, + { + .start = ASYNC_BANK0_BASE, + .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .d_conf = SDRAM_EBIU, + .valid = 1, + .name = "ASYNC Memory", + }, + { +#if defined(CONFIG_BF561) + .start = L2_SRAM, + .end = L2_SRAM_END, + .psize = SIZE_1M, + .attr = SWITCH_T | D_CPLB, + .i_conf = L2_MEMORY, + .d_conf = L2_MEMORY, + .valid = 1, +#else + .valid = 0, +#endif + .name = "L2 Memory", + } +}; + +static u16 __init lock_kernel_check(u32 start, u32 end) +{ + if ((start <= (u32) _stext && end >= (u32) _end) + || (start >= (u32) _stext && end <= (u32) _end)) + return IN_KERNEL; + return 0; +} + +static unsigned short __init +fill_cplbtab(struct cplb_tab *table, + unsigned long start, unsigned long end, + unsigned long block_size, unsigned long cplb_data) +{ + int i; + + switch (block_size) { + case SIZE_4M: + i = 3; + break; + case SIZE_1M: + i = 2; + break; + case SIZE_4K: + i = 1; + break; + case SIZE_1K: + default: + i = 0; + break; + } + + cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); + + while ((start < end) && (table->pos < table->size)) { + + table->tab[table->pos++] = start; + + if (lock_kernel_check(start, start + block_size) == IN_KERNEL) + table->tab[table->pos++] = + cplb_data | CPLB_LOCK | CPLB_DIRTY; + else + table->tab[table->pos++] = cplb_data; + + start += block_size; + } + return 0; +} + +static unsigned short __init +close_cplbtab(struct cplb_tab *table) +{ + + while (table->pos < table->size) { + + table->tab[table->pos++] = 0; + table->tab[table->pos++] = 0; /* !CPLB_VALID */ + } + return 0; +} + +/* helper function */ +static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +{ + if (cplb_data[i].psize) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].i_conf); + } else { +#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) + if (i == SDRAM_KERN) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + SIZE_4M, + cplb_data[i].i_conf); + } else +#endif + { + fill_cplbtab(t, + cplb_data[i].start, + a_start, + SIZE_1M, + cplb_data[i].i_conf); + fill_cplbtab(t, + a_start, + a_end, + SIZE_4M, + cplb_data[i].i_conf); + fill_cplbtab(t, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].i_conf); + } + } +} + +static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +{ + if (cplb_data[i].psize) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].d_conf); + } else { + fill_cplbtab(t, + cplb_data[i].start, + a_start, SIZE_1M, + cplb_data[i].d_conf); + fill_cplbtab(t, a_start, + a_end, SIZE_4M, + cplb_data[i].d_conf); + fill_cplbtab(t, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].d_conf); + } +} + +void __init generate_cpl_tables(void) +{ + + u16 i, j, process; + u32 a_start, a_end, as, ae, as_1m; + + struct cplb_tab *t_i = NULL; + struct cplb_tab *t_d = NULL; + struct s_cplb cplb; + + cplb.init_i.size = MAX_CPLBS; + cplb.init_d.size = MAX_CPLBS; + cplb.switch_i.size = MAX_SWITCH_I_CPLBS; + cplb.switch_d.size = MAX_SWITCH_D_CPLBS; + + cplb.init_i.pos = 0; + cplb.init_d.pos = 0; + cplb.switch_i.pos = 0; + cplb.switch_d.pos = 0; + + cplb.init_i.tab = icplb_table; + cplb.init_d.tab = dcplb_table; + cplb.switch_i.tab = ipdt_table; + cplb.switch_d.tab = dpdt_table; + + cplb_data[SDRAM_KERN].end = memory_end; + +#ifdef CONFIG_MTD_UCLINUX + cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; + cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; + cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; +# if defined(CONFIG_ROMFS_FS) + cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; + + /* + * The ROMFS_FS size is often not multiple of 1MB. + * This can cause multiple CPLB sets covering the same memory area. + * This will then cause multiple CPLB hit exceptions. + * Workaround: We ensure a contiguous memory area by extending the kernel + * memory section over the mtd section. + * For ROMFS_FS memory must be covered with ICPLBs anyways. + * So there is no difference between kernel and mtd memory setup. + */ + + cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; + cplb_data[SDRAM_RAM_MTD].valid = 0; + +# endif +#else + cplb_data[SDRAM_RAM_MTD].valid = 0; +#endif + + cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; + cplb_data[SDRAM_DMAZ].end = _ramend; + + cplb_data[RES_MEM].start = _ramend; + cplb_data[RES_MEM].end = physical_mem_end; + + if (reserved_mem_dcache_on) + cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; + else + cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; + + if (reserved_mem_icache_on) + cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; + else + cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; + + for (i = ZERO_P; i <= L2_MEM; i++) { + if (!cplb_data[i].valid) + continue; + + as_1m = cplb_data[i].start % SIZE_1M; + + /* We need to make sure all sections are properly 1M aligned + * However between Kernel Memory and the Kernel mtd section, depending on the + * rootfs size, there can be overlapping memory areas. + */ + + if (as_1m && i != L1I_MEM && i != L1D_MEM) { +#ifdef CONFIG_MTD_UCLINUX + if (i == SDRAM_RAM_MTD) { + if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) + cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; + else + cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); + } else +#endif + printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", + cplb_data[i].name, cplb_data[i].start); + } + + as = cplb_data[i].start % SIZE_4M; + ae = cplb_data[i].end % SIZE_4M; + + if (as) + a_start = cplb_data[i].start + (SIZE_4M - (as)); + else + a_start = cplb_data[i].start; + + a_end = cplb_data[i].end - ae; + + for (j = INITIAL_T; j <= SWITCH_T; j++) { + + switch (j) { + case INITIAL_T: + if (cplb_data[i].attr & INITIAL_T) { + t_i = &cplb.init_i; + t_d = &cplb.init_d; + process = 1; + } else + process = 0; + break; + case SWITCH_T: + if (cplb_data[i].attr & SWITCH_T) { + t_i = &cplb.switch_i; + t_d = &cplb.switch_d; + process = 1; + } else + process = 0; + break; + default: + process = 0; + break; + } + + if (!process) + continue; + if (cplb_data[i].attr & I_CPLB) + __fill_code_cplbtab(t_i, i, a_start, a_end); + + if (cplb_data[i].attr & D_CPLB) + __fill_data_cplbtab(t_d, i, a_start, a_end); + } + } + +/* close tables */ + + close_cplbtab(&cplb.init_i); + close_cplbtab(&cplb.init_d); + + cplb.init_i.tab[cplb.init_i.pos] = -1; + cplb.init_d.tab[cplb.init_d.pos] = -1; + cplb.switch_i.tab[cplb.switch_i.pos] = -1; + cplb.switch_d.tab[cplb.switch_d.pos] = -1; + +} + +#endif + diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index 539eb24e062f..ea48d5b13f11 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -34,8 +34,8 @@ #include <linux/spinlock.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/io.h> #include <asm/cacheflush.h> -#include <asm/io.h> #include <asm/bfin-global.h> static spinlock_t dma_page_lock; @@ -159,10 +159,13 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, BUG_ON(direction == DMA_NONE); - for (i = 0; i < nents; i++) - invalidate_dcache_range(sg_dma_address(&sg[i]), - sg_dma_address(&sg[i]) + - sg_dma_len(&sg[i])); + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = page_address(sg->page) + sg->offset; + + invalidate_dcache_range(sg_dma_address(sg), + sg_dma_address(sg) + + sg_dma_len(sg)); + } return nents; } diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c index 8b89c99f9dfa..0fcba74840b7 100644 --- a/arch/blackfin/kernel/dualcore_test.c +++ b/arch/blackfin/kernel/dualcore_test.c @@ -30,19 +30,19 @@ #include <linux/init.h> #include <linux/module.h> -static int *testarg = (int*)0xfeb00000; +static int *testarg = (int *)0xfeb00000; static int test_init(void) { *testarg = 1; - printk("Dual core test module inserted: set testarg = [%d]\n @ [%p]\n", + printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n", *testarg, testarg); return 0; } static void test_exit(void) { - printk("Dual core test module removed: testarg = [%d]\n", *testarg); + printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg); } module_init(test_init); diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S new file mode 100644 index 000000000000..d8b1ebc70996 --- /dev/null +++ b/arch/blackfin/kernel/fixed_code.S @@ -0,0 +1,132 @@ +/* + * This file contains sequences of code that will be copied to a + * fixed location, defined in <asm/atomic_seq.h>. The interrupt + * handlers ensure that these sequences appear to be atomic when + * executed from userspace. + * These are aligned to 16 bytes, so that we have some space to replace + * these sequences with something else (e.g. kernel traps if we ever do + * BF561 SMP). + */ +#include <linux/linkage.h> +#include <linux/unistd.h> +#include <asm/entry.h> + +.text +ENTRY(_fixed_code_start) + +.align 16 +ENTRY(_sigreturn_stub) + P0 = __NR_rt_sigreturn; + EXCPT 0; + /* Speculative execution paranoia. */ +0: JUMP.S 0b; +ENDPROC (_sigreturn_stub) + +.align 16 + /* + * Atomic swap, 8 bit. + * Inputs: P0: memory address to use + * R1: value to store + * Output: R0: old contents of the memory address, zero extended. + */ +ENTRY(_atomic_xchg32) + R0 = [P0]; + [P0] = R1; + rts; +ENDPROC (_atomic_xchg32) + +.align 16 + /* + * Compare and swap, 32 bit. + * Inputs: P0: memory address to use + * R1: compare value + * R2: new value to store + * The new value is stored if the contents of the memory + * address is equal to the compare value. + * Output: R0: old contents of the memory address. + */ +ENTRY(_atomic_cas32) + R0 = [P0]; + CC = R0 == R1; + IF !CC JUMP 1f; + [P0] = R2; +1: + rts; +ENDPROC (_atomic_cas32) + +.align 16 + /* + * Atomic add, 32 bit. + * Inputs: P0: memory address to use + * R0: value to add + * Outputs: R0: new contents of the memory address. + * R1: previous contents of the memory address. + */ +ENTRY(_atomic_add32) + R1 = [P0]; + R0 = R1 + R0; + [P0] = R0; + rts; +ENDPROC (_atomic_add32) + +.align 16 + /* + * Atomic sub, 32 bit. + * Inputs: P0: memory address to use + * R0: value to subtract + * Outputs: R0: new contents of the memory address. + * R1: previous contents of the memory address. + */ +ENTRY(_atomic_sub32) + R1 = [P0]; + R0 = R1 - R0; + [P0] = R0; + rts; +ENDPROC (_atomic_sub32) + +.align 16 + /* + * Atomic ior, 32 bit. + * Inputs: P0: memory address to use + * R0: value to ior + * Outputs: R0: new contents of the memory address. + * R1: previous contents of the memory address. + */ +ENTRY(_atomic_ior32) + R1 = [P0]; + R0 = R1 | R0; + [P0] = R0; + rts; +ENDPROC (_atomic_ior32) + +.align 16 + /* + * Atomic ior, 32 bit. + * Inputs: P0: memory address to use + * R0: value to ior + * Outputs: R0: new contents of the memory address. + * R1: previous contents of the memory address. + */ +ENTRY(_atomic_and32) + R1 = [P0]; + R0 = R1 & R0; + [P0] = R0; + rts; +ENDPROC (_atomic_ior32) + +.align 16 + /* + * Atomic ior, 32 bit. + * Inputs: P0: memory address to use + * R0: value to ior + * Outputs: R0: new contents of the memory address. + * R1: previous contents of the memory address. + */ +ENTRY(_atomic_xor32) + R1 = [P0]; + R0 = R1 ^ R0; + [P0] = R0; + rts; +ENDPROC (_atomic_ior32) + +ENTRY(_fixed_code_end) diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c index a92587b628b5..d188b2430536 100644 --- a/arch/blackfin/kernel/flat.c +++ b/arch/blackfin/kernel/flat.c @@ -36,24 +36,22 @@ unsigned long bfin_get_addr_from_rp(unsigned long *ptr, unsigned long val; switch (type) { - case FLAT_BFIN_RELOC_TYPE_16_BIT: - case FLAT_BFIN_RELOC_TYPE_16H_BIT: - usptr = (unsigned short *)ptr; - pr_debug("*usptr = %x", get_unaligned(usptr)); - val = get_unaligned(usptr); - val += *persistent; - break; + case FLAT_BFIN_RELOC_TYPE_16_BIT: + case FLAT_BFIN_RELOC_TYPE_16H_BIT: + usptr = (unsigned short *)ptr; + pr_debug("*usptr = %x", get_unaligned(usptr)); + val = get_unaligned(usptr); + val += *persistent; + break; - case FLAT_BFIN_RELOC_TYPE_32_BIT: - pr_debug("*ptr = %lx", get_unaligned(ptr)); - val = get_unaligned(ptr); - break; + case FLAT_BFIN_RELOC_TYPE_32_BIT: + pr_debug("*ptr = %lx", get_unaligned(ptr)); + val = get_unaligned(ptr); + break; - default: - pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", - type); - - return 0; + default: + pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", type); + return 0; } /* @@ -81,21 +79,20 @@ void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr, int type = (relval >> 26) & 7; switch (type) { - case FLAT_BFIN_RELOC_TYPE_16_BIT: - put_unaligned(addr, usptr); - pr_debug("new value %x at %p", get_unaligned(usptr), - usptr); - break; + case FLAT_BFIN_RELOC_TYPE_16_BIT: + put_unaligned(addr, usptr); + pr_debug("new value %x at %p", get_unaligned(usptr), usptr); + break; - case FLAT_BFIN_RELOC_TYPE_16H_BIT: - put_unaligned(addr >> 16, usptr); - pr_debug("new value %x", get_unaligned(usptr)); - break; + case FLAT_BFIN_RELOC_TYPE_16H_BIT: + put_unaligned(addr >> 16, usptr); + pr_debug("new value %x", get_unaligned(usptr)); + break; - case FLAT_BFIN_RELOC_TYPE_32_BIT: - put_unaligned(addr, ptr); - pr_debug("new ptr =%lx", get_unaligned(ptr)); - break; + case FLAT_BFIN_RELOC_TYPE_32_BIT: + put_unaligned(addr, ptr); + pr_debug("new ptr =%lx", get_unaligned(ptr)); + break; } } EXPORT_SYMBOL(bfin_put_addr_at_rp); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 80996a1a94ca..1fc001c7abda 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -82,7 +82,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); - unlock: + unlock: spin_unlock_irqrestore(&irq_desc[i].lock, flags); } else if (i == NR_IRQS) { seq_printf(p, "Err: %10lu\n", irq_err_count); diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c new file mode 100644 index 000000000000..a9c15515bfd7 --- /dev/null +++ b/arch/blackfin/kernel/kgdb.c @@ -0,0 +1,421 @@ +/* + * File: arch/blackfin/kernel/kgdb.c + * Based on: + * Author: Sonic Zhang + * + * Created: + * Description: + * + * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ + * + * Modified: + * Copyright 2005-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/ptrace.h> /* for linux pt_regs struct */ +#include <linux/kgdb.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/debugger.h> +#include <linux/errno.h> +#include <linux/irq.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/blackfin.h> + +/* Put the error code here just in case the user cares. */ +int gdb_bf533errcode; +/* Likewise, the vector number here (since GDB only gets the signal + number through the usual means, and that's not very specific). */ +int gdb_bf533vector = -1; + +#if KGDB_MAX_NO_CPUS != 8 +#error change the definition of slavecpulocks +#endif + +void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + gdb_regs[BFIN_R0] = regs->r0; + gdb_regs[BFIN_R1] = regs->r1; + gdb_regs[BFIN_R2] = regs->r2; + gdb_regs[BFIN_R3] = regs->r3; + gdb_regs[BFIN_R4] = regs->r4; + gdb_regs[BFIN_R5] = regs->r5; + gdb_regs[BFIN_R6] = regs->r6; + gdb_regs[BFIN_R7] = regs->r7; + gdb_regs[BFIN_P0] = regs->p0; + gdb_regs[BFIN_P1] = regs->p1; + gdb_regs[BFIN_P2] = regs->p2; + gdb_regs[BFIN_P3] = regs->p3; + gdb_regs[BFIN_P4] = regs->p4; + gdb_regs[BFIN_P5] = regs->p5; + gdb_regs[BFIN_SP] = regs->reserved; + gdb_regs[BFIN_FP] = regs->fp; + gdb_regs[BFIN_I0] = regs->i0; + gdb_regs[BFIN_I1] = regs->i1; + gdb_regs[BFIN_I2] = regs->i2; + gdb_regs[BFIN_I3] = regs->i3; + gdb_regs[BFIN_M0] = regs->m0; + gdb_regs[BFIN_M1] = regs->m1; + gdb_regs[BFIN_M2] = regs->m2; + gdb_regs[BFIN_M3] = regs->m3; + gdb_regs[BFIN_B0] = regs->b0; + gdb_regs[BFIN_B1] = regs->b1; + gdb_regs[BFIN_B2] = regs->b2; + gdb_regs[BFIN_B3] = regs->b3; + gdb_regs[BFIN_L0] = regs->l0; + gdb_regs[BFIN_L1] = regs->l1; + gdb_regs[BFIN_L2] = regs->l2; + gdb_regs[BFIN_L3] = regs->l3; + gdb_regs[BFIN_A0_DOT_X] = regs->a0x; + gdb_regs[BFIN_A0_DOT_W] = regs->a0w; + gdb_regs[BFIN_A1_DOT_X] = regs->a1x; + gdb_regs[BFIN_A1_DOT_W] = regs->a1w; + gdb_regs[BFIN_ASTAT] = regs->astat; + gdb_regs[BFIN_RETS] = regs->rets; + gdb_regs[BFIN_LC0] = regs->lc0; + gdb_regs[BFIN_LT0] = regs->lt0; + gdb_regs[BFIN_LB0] = regs->lb0; + gdb_regs[BFIN_LC1] = regs->lc1; + gdb_regs[BFIN_LT1] = regs->lt1; + gdb_regs[BFIN_LB1] = regs->lb1; + gdb_regs[BFIN_CYCLES] = 0; + gdb_regs[BFIN_CYCLES2] = 0; + gdb_regs[BFIN_USP] = regs->usp; + gdb_regs[BFIN_SEQSTAT] = regs->seqstat; + gdb_regs[BFIN_SYSCFG] = regs->syscfg; + gdb_regs[BFIN_RETI] = regs->pc; + gdb_regs[BFIN_RETX] = regs->retx; + gdb_regs[BFIN_RETN] = regs->retn; + gdb_regs[BFIN_RETE] = regs->rete; + gdb_regs[BFIN_PC] = regs->pc; + gdb_regs[BFIN_CC] = 0; + gdb_regs[BFIN_EXTRA1] = 0; + gdb_regs[BFIN_EXTRA2] = 0; + gdb_regs[BFIN_EXTRA3] = 0; + gdb_regs[BFIN_IPEND] = regs->ipend; +} + +/* + * Extracts ebp, esp and eip values understandable by gdb from the values + * saved by switch_to. + * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp + * prior to entering switch_to is 8 greater then the value that is saved. + * If switch_to changes, change following code appropriately. + */ +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + gdb_regs[BFIN_SP] = p->thread.ksp; + gdb_regs[BFIN_PC] = p->thread.pc; + gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat; +} + +void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + regs->r0 = gdb_regs[BFIN_R0]; + regs->r1 = gdb_regs[BFIN_R1]; + regs->r2 = gdb_regs[BFIN_R2]; + regs->r3 = gdb_regs[BFIN_R3]; + regs->r4 = gdb_regs[BFIN_R4]; + regs->r5 = gdb_regs[BFIN_R5]; + regs->r6 = gdb_regs[BFIN_R6]; + regs->r7 = gdb_regs[BFIN_R7]; + regs->p0 = gdb_regs[BFIN_P0]; + regs->p1 = gdb_regs[BFIN_P1]; + regs->p2 = gdb_regs[BFIN_P2]; + regs->p3 = gdb_regs[BFIN_P3]; + regs->p4 = gdb_regs[BFIN_P4]; + regs->p5 = gdb_regs[BFIN_P5]; + regs->fp = gdb_regs[BFIN_FP]; + regs->i0 = gdb_regs[BFIN_I0]; + regs->i1 = gdb_regs[BFIN_I1]; + regs->i2 = gdb_regs[BFIN_I2]; + regs->i3 = gdb_regs[BFIN_I3]; + regs->m0 = gdb_regs[BFIN_M0]; + regs->m1 = gdb_regs[BFIN_M1]; + regs->m2 = gdb_regs[BFIN_M2]; + regs->m3 = gdb_regs[BFIN_M3]; + regs->b0 = gdb_regs[BFIN_B0]; + regs->b1 = gdb_regs[BFIN_B1]; + regs->b2 = gdb_regs[BFIN_B2]; + regs->b3 = gdb_regs[BFIN_B3]; + regs->l0 = gdb_regs[BFIN_L0]; + regs->l1 = gdb_regs[BFIN_L1]; + regs->l2 = gdb_regs[BFIN_L2]; + regs->l3 = gdb_regs[BFIN_L3]; + regs->a0x = gdb_regs[BFIN_A0_DOT_X]; + regs->a0w = gdb_regs[BFIN_A0_DOT_W]; + regs->a1x = gdb_regs[BFIN_A1_DOT_X]; + regs->a1w = gdb_regs[BFIN_A1_DOT_W]; + regs->rets = gdb_regs[BFIN_RETS]; + regs->lc0 = gdb_regs[BFIN_LC0]; + regs->lt0 = gdb_regs[BFIN_LT0]; + regs->lb0 = gdb_regs[BFIN_LB0]; + regs->lc1 = gdb_regs[BFIN_LC1]; + regs->lt1 = gdb_regs[BFIN_LT1]; + regs->lb1 = gdb_regs[BFIN_LB1]; + regs->usp = gdb_regs[BFIN_USP]; + regs->syscfg = gdb_regs[BFIN_SYSCFG]; + regs->retx = gdb_regs[BFIN_PC]; + regs->retn = gdb_regs[BFIN_RETN]; + regs->rete = gdb_regs[BFIN_RETE]; + regs->pc = gdb_regs[BFIN_PC]; + +#if 0 /* can't change these */ + regs->astat = gdb_regs[BFIN_ASTAT]; + regs->seqstat = gdb_regs[BFIN_SEQSTAT]; + regs->ipend = gdb_regs[BFIN_IPEND]; +#endif +} + +struct hw_breakpoint { + unsigned int occupied:1; + unsigned int skip:1; + unsigned int enabled:1; + unsigned int type:1; + unsigned int dataacc:2; + unsigned short count; + unsigned int addr; +} breakinfo[HW_BREAKPOINT_NUM]; + +int kgdb_arch_init(void) +{ + kgdb_remove_all_hw_break(); + return 0; +} + +int kgdb_set_hw_break(unsigned long addr) +{ + int breakno; + for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) + if (!breakinfo[breakno].occupied) { + breakinfo[breakno].occupied = 1; + breakinfo[breakno].enabled = 1; + breakinfo[breakno].type = 1; + breakinfo[breakno].addr = addr; + return 0; + } + + return -ENOSPC; +} + +int kgdb_remove_hw_break(unsigned long addr) +{ + int breakno; + for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) + if (breakinfo[breakno].addr == addr) + memset(&(breakinfo[breakno]), 0, sizeof(struct hw_breakpoint)); + + return 0; +} + +void kgdb_remove_all_hw_break(void) +{ + memset(breakinfo, 0, sizeof(struct hw_breakpoint)*8); +} + +/* +void kgdb_show_info(void) +{ + printk(KERN_DEBUG "hwd: wpia0=0x%x, wpiacnt0=%d, wpiactl=0x%x, wpstat=0x%x\n", + bfin_read_WPIA0(), bfin_read_WPIACNT0(), + bfin_read_WPIACTL(), bfin_read_WPSTAT()); +} +*/ + +void kgdb_correct_hw_break(void) +{ + int breakno; + int correctit; + uint32_t wpdactl = bfin_read_WPDACTL(); + + correctit = 0; + for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) { + if (breakinfo[breakno].type == 1) { + switch (breakno) { + case 0: + if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN0)) { + correctit = 1; + wpdactl &= ~(WPIREN01|EMUSW0); + wpdactl |= WPIAEN0|WPICNTEN0; + bfin_write_WPIA0(breakinfo[breakno].addr); + bfin_write_WPIACNT0(breakinfo[breakno].skip); + } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN0)) { + correctit = 1; + wpdactl &= ~WPIAEN0; + } + break; + + case 1: + if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN1)) { + correctit = 1; + wpdactl &= ~(WPIREN01|EMUSW1); + wpdactl |= WPIAEN1|WPICNTEN1; + bfin_write_WPIA1(breakinfo[breakno].addr); + bfin_write_WPIACNT1(breakinfo[breakno].skip); + } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN1)) { + correctit = 1; + wpdactl &= ~WPIAEN1; + } + break; + + case 2: + if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN2)) { + correctit = 1; + wpdactl &= ~(WPIREN23|EMUSW2); + wpdactl |= WPIAEN2|WPICNTEN2; + bfin_write_WPIA2(breakinfo[breakno].addr); + bfin_write_WPIACNT2(breakinfo[breakno].skip); + } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN2)) { + correctit = 1; + wpdactl &= ~WPIAEN2; + } + break; + + case 3: + if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN3)) { + correctit = 1; + wpdactl &= ~(WPIREN23|EMUSW3); + wpdactl |= WPIAEN3|WPICNTEN3; + bfin_write_WPIA3(breakinfo[breakno].addr); + bfin_write_WPIACNT3(breakinfo[breakno].skip); + } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN3)) { + correctit = 1; + wpdactl &= ~WPIAEN3; + } + break; + case 4: + if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN4)) { + correctit = 1; + wpdactl &= ~(WPIREN45|EMUSW4); + wpdactl |= WPIAEN4|WPICNTEN4; + bfin_write_WPIA4(breakinfo[breakno].addr); + bfin_write_WPIACNT4(breakinfo[breakno].skip); + } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN4)) { + correctit = 1; + wpdactl &= ~WPIAEN4; + } + break; + case 5: + if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN5)) { + correctit = 1; + wpdactl &= ~(WPIREN45|EMUSW5); + wpdactl |= WPIAEN5|WPICNTEN5; + bfin_write_WPIA5(breakinfo[breakno].addr); + bfin_write_WPIACNT5(breakinfo[breakno].skip); + } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN5)) { + correctit = 1; + wpdactl &= ~WPIAEN5; + } + break; + } + } + } + if (correctit) { + wpdactl &= ~WPAND; + wpdactl |= WPPWR; + /*printk("correct_hw_break: wpdactl=0x%x\n", wpdactl);*/ + bfin_write_WPDACTL(wpdactl); + CSYNC(); + /*kgdb_show_info();*/ + } +} + +void kgdb_disable_hw_debug(struct pt_regs *regs) +{ + /* Disable hardware debugging while we are in kgdb */ + bfin_write_WPIACTL(bfin_read_WPIACTL() & ~0x1); + CSYNC(); +} + +void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code) +{ + /* Master processor is completely in the debugger */ + gdb_bf533vector = eVector; + gdb_bf533errcode = err_code; +} + +int kgdb_arch_handle_exception(int exceptionVector, int signo, + int err_code, char *remcom_in_buffer, + char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + long addr; + long breakno; + char *ptr; + int newPC; + int wp_status; + + switch (remcom_in_buffer[0]) { + case 'c': + case 's': + if (kgdb_contthread && kgdb_contthread != current) { + strcpy(remcom_out_buffer, "E00"); + break; + } + + kgdb_contthread = NULL; + + /* try to read optional parameter, pc unchanged if no parm */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr)) { + linux_regs->retx = addr; + } + newPC = linux_regs->retx; + + /* clear the trace bit */ + linux_regs->syscfg &= 0xfffffffe; + + /* set the trace bit if we're stepping */ + if (remcom_in_buffer[0] == 's') { + linux_regs->syscfg |= 0x1; + debugger_step = 1; + } + + wp_status = bfin_read_WPSTAT(); + CSYNC(); + + if (exceptionVector == VEC_WATCH) { + for (breakno = 0; breakno < 6; ++breakno) { + if (wp_status & (1 << breakno)) { + breakinfo->skip = 1; + break; + } + } + } + kgdb_correct_hw_break(); + + bfin_write_WPSTAT(0); + + return 0; + } /* switch */ + return -1; /* this means that we do not want to exit from the handler */ +} + +struct kgdb_arch arch_kgdb_ops = { + .gdb_bpt_instr = {0xa1}, + .flags = KGDB_HW_BREAKPOINT, +}; diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index 372f756f1ad9..8b9fe29d03f4 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -165,8 +165,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, for (s = sechdrs; s < sechdrs_end; ++s) { if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) || - ((strcmp(".text", secstrings + s->sh_name)==0) && - (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) { + ((strcmp(".text", secstrings + s->sh_name) == 0) && + (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) { mod->arch.text_l1 = s; dest = l1_inst_sram_alloc(s->sh_size); if (dest == NULL) { @@ -179,9 +179,9 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, s->sh_flags &= ~SHF_ALLOC; s->sh_addr = (unsigned long)dest; } - if ((strcmp(".l1.data", secstrings + s->sh_name) == 0)|| - ((strcmp(".data", secstrings + s->sh_name)==0) && - (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) || + ((strcmp(".data", secstrings + s->sh_name) == 0) && + (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { mod->arch.data_a_l1 = s; dest = l1_data_sram_alloc(s->sh_size); if (dest == NULL) { @@ -195,8 +195,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, s->sh_addr = (unsigned long)dest; } if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 || - ((strcmp(".bss", secstrings + s->sh_name)==0) && - (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + ((strcmp(".bss", secstrings + s->sh_name) == 0) && + (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { mod->arch.bss_a_l1 = s; dest = l1_data_sram_alloc(s->sh_size); if (dest == NULL) { @@ -326,7 +326,7 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, pr_debug("before %x after %x\n", *location16, (value & 0xffff)); tmp = (value & 0xffff); - if((unsigned long)location16 >= L1_CODE_START) { + if ((unsigned long)location16 >= L1_CODE_START) { dma_memcpy(location16, &tmp, 2); } else *location16 = tmp; @@ -335,7 +335,7 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, pr_debug("before %x after %x\n", *location16, ((value >> 16) & 0xffff)); tmp = ((value >> 16) & 0xffff); - if((unsigned long)location16 >= L1_CODE_START) { + if ((unsigned long)location16 >= L1_CODE_START) { dma_memcpy(location16, &tmp, 2); } else *location16 = tmp; @@ -404,8 +404,8 @@ module_finalize(const Elf_Ehdr * hdr, continue; if ((sechdrs[i].sh_type == SHT_RELA) && - ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0)|| - ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && + ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || + ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && (hdr->e_flags & FLG_CODE_IN_L1)))) { apply_relocate_add((Elf_Shdr *) sechdrs, strtab, symindex, i, mod); @@ -417,13 +417,13 @@ module_finalize(const Elf_Ehdr * hdr, void module_arch_cleanup(struct module *mod) { if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr)) - l1_inst_sram_free((void*)mod->arch.text_l1->sh_addr); + l1_inst_sram_free((void *)mod->arch.text_l1->sh_addr); if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr)) - l1_data_sram_free((void*)mod->arch.data_a_l1->sh_addr); + l1_data_sram_free((void *)mod->arch.data_a_l1->sh_addr); if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr)) - l1_data_sram_free((void*)mod->arch.bss_a_l1->sh_addr); + l1_data_sram_free((void *)mod->arch.bss_a_l1->sh_addr); if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr)) - l1_data_B_sram_free((void*)mod->arch.data_b_l1->sh_addr); + l1_data_B_sram_free((void *)mod->arch.data_b_l1->sh_addr); if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr)) - l1_data_B_sram_free((void*)mod->arch.bss_b_l1->sh_addr); + l1_data_B_sram_free((void *)mod->arch.bss_b_l1->sh_addr); } diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 3eff7439d8d3..5a51dd6ab280 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -32,9 +32,10 @@ #include <linux/unistd.h> #include <linux/user.h> #include <linux/a.out.h> +#include <linux/uaccess.h> #include <asm/blackfin.h> -#include <asm/uaccess.h> +#include <asm/fixed_code.h> #define LED_ON 0 #define LED_OFF 1 @@ -173,8 +174,8 @@ void show_regs(struct pt_regs *regs) printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", regs->r4, regs->r5, regs->r6, regs->r7); - if (!(regs->ipend)) - printk("USP: %08lx\n", rdusp()); + if (!regs->ipend) + printk(KERN_NOTICE "USP: %08lx\n", rdusp()); } /* Fill in the fpu structure for a core dump. */ @@ -322,7 +323,7 @@ asmlinkage int sys_execve(char *name, char **argv, char **envp) goto out; error = do_execve(filename, argv, envp, regs); putname(filename); - out: + out: unlock_kernel(); return error; } @@ -350,13 +351,77 @@ unsigned long get_wchan(struct task_struct *p) return 0; } +void finish_atomic_sections (struct pt_regs *regs) +{ + if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END) + return; + + switch (regs->pc) { + case ATOMIC_XCHG32 + 2: + put_user(regs->r1, (int *)regs->p0); + regs->pc += 2; + break; + + case ATOMIC_CAS32 + 2: + case ATOMIC_CAS32 + 4: + if (regs->r0 == regs->r1) + put_user(regs->r2, (int *)regs->p0); + regs->pc = ATOMIC_CAS32 + 8; + break; + case ATOMIC_CAS32 + 6: + put_user(regs->r2, (int *)regs->p0); + regs->pc += 2; + break; + + case ATOMIC_ADD32 + 2: + regs->r0 = regs->r1 + regs->r0; + /* fall through */ + case ATOMIC_ADD32 + 4: + put_user(regs->r0, (int *)regs->p0); + regs->pc = ATOMIC_ADD32 + 6; + break; + + case ATOMIC_SUB32 + 2: + regs->r0 = regs->r1 - regs->r0; + /* fall through */ + case ATOMIC_SUB32 + 4: + put_user(regs->r0, (int *)regs->p0); + regs->pc = ATOMIC_SUB32 + 6; + break; + + case ATOMIC_IOR32 + 2: + regs->r0 = regs->r1 | regs->r0; + /* fall through */ + case ATOMIC_IOR32 + 4: + put_user(regs->r0, (int *)regs->p0); + regs->pc = ATOMIC_IOR32 + 6; + break; + + case ATOMIC_AND32 + 2: + regs->r0 = regs->r1 & regs->r0; + /* fall through */ + case ATOMIC_AND32 + 4: + put_user(regs->r0, (int *)regs->p0); + regs->pc = ATOMIC_AND32 + 6; + break; + + case ATOMIC_XOR32 + 2: + regs->r0 = regs->r1 ^ regs->r0; + /* fall through */ + case ATOMIC_XOR32 + 4: + put_user(regs->r0, (int *)regs->p0); + regs->pc = ATOMIC_XOR32 + 6; + break; + } +} + #if defined(CONFIG_ACCESS_CHECK) int _access_ok(unsigned long addr, unsigned long size) { if (addr > (addr + size)) return 0; - if (segment_eq(get_fs(),KERNEL_DS)) + if (segment_eq(get_fs(), KERNEL_DS)) return 1; #ifdef CONFIG_MTD_UCLINUX if (addr >= memory_start && (addr + size) <= memory_end) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index e718bb4a1ef0..ed800c7456dd 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -36,8 +36,8 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -122,7 +122,7 @@ static inline long get_reg(struct task_struct *task, int regno) static inline int put_reg(struct task_struct *task, int regno, unsigned long data) { - char * reg_ptr; + char *reg_ptr; struct pt_regs *regs = (struct pt_regs *)((unsigned long)task_stack_page(task) + @@ -146,7 +146,7 @@ put_reg(struct task_struct *task, int regno, unsigned long data) break; default: if (regno <= 216) - *(long *)(reg_ptr + regno) = data; + *(long *)(reg_ptr + regno) = data; } return 0; } diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 83060f98d15d..f59dcee7bae3 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -42,6 +42,7 @@ #include <asm/cacheflush.h> #include <asm/blackfin.h> #include <asm/cplbinit.h> +#include <asm/fixed_code.h> u16 _bfin_swrst; @@ -63,10 +64,6 @@ EXPORT_SYMBOL(mtd_size); char __initdata command_line[COMMAND_LINE_SIZE]; -#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) -static void generate_cpl_tables(void); -#endif - void __init bf53x_cache_init(void) { #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) @@ -197,6 +194,17 @@ void __init setup_arch(char **cmdline_p) /* this give a chance to get printk() working before crash. */ #endif + printk(KERN_INFO "Hardware Trace "); + if (bfin_read_TBUFCTL() & 0x1 ) + printk("Active "); + else + printk("Off "); + if (bfin_read_TBUFCTL() & 0x2) + printk("and Enabled\n"); + else + printk("and Disabled\n"); + + #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) /* we need to initialize the Flashrom device here since we might * do things with flash early on in the boot @@ -354,15 +362,15 @@ void __init setup_arch(char **cmdline_p) , _stext, _etext, __start_rodata, __end_rodata, _sdata, _edata, - (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000), + (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000), __init_begin, __init_end, __bss_start, __bss_stop, - (void*)_ramstart, (void*)memory_end + (void *)_ramstart, (void *)memory_end #ifdef CONFIG_MTD_UCLINUX - , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size) + , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size) #endif #if DMA_UNCACHED_REGION > 0 - , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend) + , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend) #endif ); @@ -388,11 +396,11 @@ void __init setup_arch(char **cmdline_p) /* check the size of the l1 area */ l1_length = _etext_l1 - _stext_l1; if (l1_length > L1_CODE_LENGTH) - panic("L1 memory overflow\n"); + panic("L1 code memory overflow\n"); l1_length = _ebss_l1 - _sdata_l1; if (l1_length > L1_DATA_A_LENGTH) - panic("L1 memory overflow\n"); + panic("L1 data memory overflow\n"); #ifdef BF561_FAMILY _bfin_swrst = bfin_read_SICA_SWRST(); @@ -400,10 +408,28 @@ void __init setup_arch(char **cmdline_p) _bfin_swrst = bfin_read_SWRST(); #endif - bf53x_cache_init(); + /* Copy atomic sequences to their fixed location, and sanity check that + these locations are the ones that we advertise to userspace. */ + memcpy((void *)FIXED_CODE_START, &fixed_code_start, + FIXED_CODE_END - FIXED_CODE_START); + BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start + != SIGRETURN_STUB - FIXED_CODE_START); + BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start + != ATOMIC_XCHG32 - FIXED_CODE_START); + BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start + != ATOMIC_CAS32 - FIXED_CODE_START); + BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start + != ATOMIC_ADD32 - FIXED_CODE_START); + BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start + != ATOMIC_SUB32 - FIXED_CODE_START); + BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start + != ATOMIC_IOR32 - FIXED_CODE_START); + BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start + != ATOMIC_AND32 - FIXED_CODE_START); + BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start + != ATOMIC_XOR32 - FIXED_CODE_START); - printk(KERN_INFO "Hardware Trace Enabled\n"); - bfin_write_TBUFCTL(0x03); + bf53x_cache_init(); } static int __init topology_init(void) @@ -421,286 +447,6 @@ static int __init topology_init(void) subsys_initcall(topology_init); -#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) -static u16 __init lock_kernel_check(u32 start, u32 end) -{ - if ((start <= (u32) _stext && end >= (u32) _end) - || (start >= (u32) _stext && end <= (u32) _end)) - return IN_KERNEL; - return 0; -} - -static unsigned short __init -fill_cplbtab(struct cplb_tab *table, - unsigned long start, unsigned long end, - unsigned long block_size, unsigned long cplb_data) -{ - int i; - - switch (block_size) { - case SIZE_4M: - i = 3; - break; - case SIZE_1M: - i = 2; - break; - case SIZE_4K: - i = 1; - break; - case SIZE_1K: - default: - i = 0; - break; - } - - cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); - - while ((start < end) && (table->pos < table->size)) { - - table->tab[table->pos++] = start; - - if (lock_kernel_check(start, start + block_size) == IN_KERNEL) - table->tab[table->pos++] = - cplb_data | CPLB_LOCK | CPLB_DIRTY; - else - table->tab[table->pos++] = cplb_data; - - start += block_size; - } - return 0; -} - -static unsigned short __init -close_cplbtab(struct cplb_tab *table) -{ - - while (table->pos < table->size) { - - table->tab[table->pos++] = 0; - table->tab[table->pos++] = 0; /* !CPLB_VALID */ - } - return 0; -} - -/* helper function */ -static void __fill_code_cplbtab(struct cplb_tab *t, int i, - u32 a_start, u32 a_end) -{ - if (cplb_data[i].psize) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].i_conf); - } else { -#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) - if (i == SDRAM_KERN) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - SIZE_4M, - cplb_data[i].i_conf); - } else { -#endif - fill_cplbtab(t, - cplb_data[i].start, - a_start, - SIZE_1M, - cplb_data[i].i_conf); - fill_cplbtab(t, - a_start, - a_end, - SIZE_4M, - cplb_data[i].i_conf); - fill_cplbtab(t, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].i_conf); - } - } -} - -static void __fill_data_cplbtab(struct cplb_tab *t, int i, - u32 a_start, u32 a_end) -{ - if (cplb_data[i].psize) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].d_conf); - } else { - fill_cplbtab(t, - cplb_data[i].start, - a_start, SIZE_1M, - cplb_data[i].d_conf); - fill_cplbtab(t, a_start, - a_end, SIZE_4M, - cplb_data[i].d_conf); - fill_cplbtab(t, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].d_conf); - } -} -static void __init generate_cpl_tables(void) -{ - - u16 i, j, process; - u32 a_start, a_end, as, ae, as_1m; - - struct cplb_tab *t_i = NULL; - struct cplb_tab *t_d = NULL; - struct s_cplb cplb; - - cplb.init_i.size = MAX_CPLBS; - cplb.init_d.size = MAX_CPLBS; - cplb.switch_i.size = MAX_SWITCH_I_CPLBS; - cplb.switch_d.size = MAX_SWITCH_D_CPLBS; - - cplb.init_i.pos = 0; - cplb.init_d.pos = 0; - cplb.switch_i.pos = 0; - cplb.switch_d.pos = 0; - - cplb.init_i.tab = icplb_table; - cplb.init_d.tab = dcplb_table; - cplb.switch_i.tab = ipdt_table; - cplb.switch_d.tab = dpdt_table; - - cplb_data[SDRAM_KERN].end = memory_end; - -#ifdef CONFIG_MTD_UCLINUX - cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; - cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; - cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; -# if defined(CONFIG_ROMFS_FS) - cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; - - /* - * The ROMFS_FS size is often not multiple of 1MB. - * This can cause multiple CPLB sets covering the same memory area. - * This will then cause multiple CPLB hit exceptions. - * Workaround: We ensure a contiguous memory area by extending the kernel - * memory section over the mtd section. - * For ROMFS_FS memory must be covered with ICPLBs anyways. - * So there is no difference between kernel and mtd memory setup. - */ - - cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; - cplb_data[SDRAM_RAM_MTD].valid = 0; - -# endif -#else - cplb_data[SDRAM_RAM_MTD].valid = 0; -#endif - - cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; - cplb_data[SDRAM_DMAZ].end = _ramend; - - cplb_data[RES_MEM].start = _ramend; - cplb_data[RES_MEM].end = physical_mem_end; - - if (reserved_mem_dcache_on) - cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; - else - cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; - - if (reserved_mem_icache_on) - cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; - else - cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; - - for (i = ZERO_P; i <= L2_MEM; i++) { - if (!cplb_data[i].valid) - continue; - - as_1m = cplb_data[i].start % SIZE_1M; - - /* - * We need to make sure all sections are properly 1M aligned - * However between Kernel Memory and the Kernel mtd section, - * depending on the rootfs size, there can be overlapping - * memory areas. - */ - - if (as_1m && i != L1I_MEM && i != L1D_MEM) { -#ifdef CONFIG_MTD_UCLINUX - if (i == SDRAM_RAM_MTD) { - if ((cplb_data[SDRAM_KERN].end + 1) > - cplb_data[SDRAM_RAM_MTD].start) - cplb_data[SDRAM_RAM_MTD].start = - (cplb_data[i].start & - (-2*SIZE_1M)) + SIZE_1M; - else - cplb_data[SDRAM_RAM_MTD].start = - (cplb_data[i].start & - (-2*SIZE_1M)); - } else -#endif - printk(KERN_WARNING - "Unaligned Start of %s at 0x%X\n", - cplb_data[i].name, cplb_data[i].start); - } - - as = cplb_data[i].start % SIZE_4M; - ae = cplb_data[i].end % SIZE_4M; - - if (as) - a_start = cplb_data[i].start + (SIZE_4M - (as)); - else - a_start = cplb_data[i].start; - - a_end = cplb_data[i].end - ae; - - for (j = INITIAL_T; j <= SWITCH_T; j++) { - - switch (j) { - case INITIAL_T: - if (cplb_data[i].attr & INITIAL_T) { - t_i = &cplb.init_i; - t_d = &cplb.init_d; - process = 1; - } else - process = 0; - break; - case SWITCH_T: - if (cplb_data[i].attr & SWITCH_T) { - t_i = &cplb.switch_i; - t_d = &cplb.switch_d; - process = 1; - } else - process = 0; - break; - default: - process = 0; - break; - } - - if (!process) - continue; - if (cplb_data[i].attr & I_CPLB) - __fill_code_cplbtab(t_i, i, a_start, a_end); - - if (cplb_data[i].attr & D_CPLB) - __fill_data_cplbtab(t_d, i, a_start, a_end); - } - } - -/* close tables */ - - close_cplbtab(&cplb.init_i); - close_cplbtab(&cplb.init_d); - - cplb.init_i.tab[cplb.init_i.pos] = -1; - cplb.init_d.tab[cplb.init_d.pos] = -1; - cplb.switch_i.tab[cplb.switch_i.pos] = -1; - cplb.switch_d.tab[cplb.switch_d.pos] = -1; - -} - -#endif - static u_long get_vco(void) { u_long msel; @@ -730,7 +476,6 @@ u_long get_cclk(void) return get_vco() / ssel; return get_vco() >> csel; } - EXPORT_SYMBOL(get_cclk); /* Get the System clock */ @@ -749,7 +494,6 @@ u_long get_sclk(void) return get_vco() / ssel; } - EXPORT_SYMBOL(get_sclk); /* @@ -804,23 +548,23 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "D-CACHE:\tOFF\n"); - switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { - case ACACHE_BSRAM: - seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n"); - dcache_size = 16; - dsup_banks = 1; - break; - case ACACHE_BCACHE: - seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n"); - dcache_size = 32; - dsup_banks = 2; - break; - case ASRAM_BSRAM: - seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n"); - dcache_size = 0; - dsup_banks = 0; - break; - default: + switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { + case ACACHE_BSRAM: + seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n"); + dcache_size = 16; + dsup_banks = 1; + break; + case ACACHE_BCACHE: + seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n"); + dcache_size = 32; + dsup_banks = 2; + break; + case ASRAM_BSRAM: + seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n"); + dcache_size = 0; + dsup_banks = 0; + break; + default: break; } diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index 316e65c3439d..5564c9588aa8 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -34,8 +34,8 @@ #include <linux/personality.h> #include <linux/binfmts.h> #include <linux/freezer.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/cacheflush.h> #include <asm/ucontext.h> @@ -124,7 +124,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused) return r0; - badframe: + badframe: force_sig(SIGSEGV, current); return 0; } @@ -239,7 +239,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, return 0; - give_sigsegv: + give_sigsegv: if (sig == SIGSEGV) ka->sa.sa_handler = SIG_DFL; force_sig(SIGSEGV, current); @@ -263,7 +263,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) } /* fallthrough */ case -ERESTARTNOINTR: - do_restart: + do_restart: regs->p0 = regs->orig_p0; regs->r0 = regs->orig_r0; regs->pc -= 2; @@ -341,7 +341,7 @@ asmlinkage void do_signal(struct pt_regs *regs) return; } -no_signal: + no_signal: /* Did we come from a system call? */ if (regs->orig_p0 >= 0) /* Restart the system call - no handlers present */ diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index f436e6743f5a..f5e1ae3d1705 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -37,12 +37,12 @@ #include <linux/syscalls.h> #include <linux/mman.h> #include <linux/file.h> +#include <linux/uaccess.h> +#include <linux/ipc.h> +#include <linux/unistd.h> #include <asm/cacheflush.h> -#include <asm/uaccess.h> -#include <asm/ipc.h> #include <asm/dma.h> -#include <asm/unistd.h> /* * sys_pipe() is the normal C calling standard for creating @@ -83,7 +83,7 @@ do_mmap2(unsigned long addr, unsigned long len, if (file) fput(file); - out: + out: return error; } diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index f578176b6d92..beef057bd1dc 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -87,7 +87,7 @@ void __init init_leds(void) static inline void do_leds(void) { static unsigned int count = 50; - static int flag = 0; + static int flag; unsigned short tmp = 0; if (--count == 0) { @@ -200,7 +200,7 @@ irqreturn_t timer_interrupt(int irq, void *dummy)__attribute__((l1_text)); irqreturn_t timer_interrupt(int irq, void *dummy) { /* last time the cmos clock got updated */ - static long last_rtc_update = 0; + static long last_rtc_update; write_seqlock(&xtime_lock); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 56058b0b6d4a..3909f5b35536 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -27,15 +27,15 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <asm/uaccess.h> +#include <linux/uaccess.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/kallsyms.h> #include <asm/traps.h> #include <asm/cacheflush.h> #include <asm/blackfin.h> -#include <asm/uaccess.h> #include <asm/irq_handler.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/kallsyms.h> +#include <asm/trace.h> #ifdef CONFIG_KGDB # include <linux/debugger.h> @@ -76,7 +76,7 @@ static int printk_address(unsigned long address) if (!modname) modname = delim = ""; return printk("<0x%p> { %s%s%s%s + 0x%lx }", - (void*)address, delim, modname, delim, symname, + (void *)address, delim, modname, delim, symname, (unsigned long)offset); } @@ -119,7 +119,7 @@ static int printk_address(unsigned long address) write_unlock_irq(&tasklist_lock); return printk("<0x%p> [ %s + 0x%lx ]", - (void*)address, name, offset); + (void *)address, name, offset); } vml = vml->next; @@ -128,19 +128,9 @@ static int printk_address(unsigned long address) write_unlock_irq(&tasklist_lock); /* we were unable to find this address anywhere */ - return printk("[<0x%p>]", (void*)address); + return printk("[<0x%p>]", (void *)address); } -#define trace_buffer_save(x) \ - do { \ - (x) = bfin_read_TBUFCTL(); \ - bfin_write_TBUFCTL((x) & ~TBUFEN); \ - } while (0) -#define trace_buffer_restore(x) \ - do { \ - bfin_write_TBUFCTL((x)); \ - } while (0) - asmlinkage void trap_c(struct pt_regs *fp) { int j, sig = 0; @@ -203,15 +193,14 @@ asmlinkage void trap_c(struct pt_regs *fp) #else /* 0x02 - User Defined, Caught by default */ #endif - /* 0x03 - Atomic test and set */ + /* 0x03 - User Defined, userspace stack overflow */ case VEC_EXCPT03: info.si_code = SEGV_STACKFLOW; sig = SIGSEGV; printk(KERN_EMERG EXC_0x03); CHK_DEBUGGER_TRAP(); break; - /* 0x04 - spinlock - handled by _ex_spinlock, - getting here is an error */ + /* 0x04 - User Defined, Caught by default */ /* 0x05 - User Defined, Caught by default */ /* 0x06 - User Defined, Caught by default */ /* 0x07 - User Defined, Caught by default */ @@ -547,29 +536,28 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" KERN_EMERG "\n", - (void*)current->mm->start_code, - (void*)current->mm->end_code, - (void*)current->mm->start_data, - (void*)current->mm->end_data, - (void*)current->mm->end_data, - (void*)current->mm->brk, - (void*)current->mm->start_stack); + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); } printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr); - if (retaddr != 0 && retaddr <= (void*)physical_mem_end + if (retaddr != 0 && retaddr <= (void *)physical_mem_end #if L1_CODE_LENGTH != 0 /* FIXME: Copy the code out of L1 Instruction SRAM through dma memcpy. */ - && !(retaddr >= (void*)L1_CODE_START - && retaddr < (void*)(L1_CODE_START + L1_CODE_LENGTH)) + && !(retaddr >= (void *)L1_CODE_START + && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH)) #endif ) { int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32; unsigned short x = 0; - for (; i < ((unsigned int)retaddr & 0xFFFFFFF0 ) + 32 ; - i += 2) { - if ( !(i & 0xF) ) + for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { + if (!(i & 0xF)) printk(KERN_EMERG "\n" KERN_EMERG "0x%08x: ", i); @@ -588,7 +576,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) " The rest of this error" " is meanless\n"); #endif - if ( i == (unsigned int)retaddr ) + if (i == (unsigned int)retaddr) printk("[%04x]", x); else printk(" %04x ", x); @@ -681,8 +669,8 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) break; } - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR()); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR()); + printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); + printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); dump_bfin_regs(fp, (void *)fp->retx); dump_stack(); panic("Unrecoverable event\n"); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 1ef1e36b3957..d06f860f4790 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -31,6 +31,7 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/mem_map.h> +#include <asm/page.h> OUTPUT_FORMAT("elf32-bfin") ENTRY(__start) @@ -63,8 +64,8 @@ SECTIONS .data : { + . = ALIGN(PAGE_SIZE); __sdata = .; - . = ALIGN(0x2000); *(.data.init_task) DATA_DATA CONSTRUCTORS @@ -72,14 +73,14 @@ SECTIONS . = ALIGN(32); *(.data.cacheline_aligned) - . = ALIGN(0x2000); + . = ALIGN(PAGE_SIZE); __edata = .; } + . = ALIGN(PAGE_SIZE); ___init_begin = .; .init : { - . = ALIGN(4096); __sinittext = .; *(.init.text) __einittext = .; @@ -152,9 +153,10 @@ SECTIONS __ebss_b_l1 = .; } - ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); + . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); + ___init_end = ALIGN(PAGE_SIZE); - .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) : + .bss ___init_end : { . = ALIGN(4); ___bss_start = .; diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c index 2ad47c4254ba..4eeefd86907f 100644 --- a/arch/blackfin/lib/strcmp.c +++ b/arch/blackfin/lib/strcmp.c @@ -6,6 +6,5 @@ int strcmp(const char *dest, const char *src) { - return __inline_strcmp(dest, src); + return __inline_strcmp(dest, src); } - diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c index 4dc835a8a19b..534589db7256 100644 --- a/arch/blackfin/lib/strcpy.c +++ b/arch/blackfin/lib/strcpy.c @@ -6,6 +6,5 @@ char *strcpy(char *dest, const char *src) { - return __inline_strcpy(dest, src); + return __inline_strcpy(dest, src); } - diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c index 947bcfe3f3bb..d791f120bff7 100644 --- a/arch/blackfin/lib/strncmp.c +++ b/arch/blackfin/lib/strncmp.c @@ -6,6 +6,5 @@ int strncmp(const char *cs, const char *ct, size_t count) { - return __inline_strncmp(cs, ct, count); + return __inline_strncmp(cs, ct, count); } - diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c index 77a9b2e95097..1fecb5c71ffb 100644 --- a/arch/blackfin/lib/strncpy.c +++ b/arch/blackfin/lib/strncpy.c @@ -6,6 +6,5 @@ char *strncpy(char *dest, const char *src, size_t n) { - return __inline_strncpy(dest, src, n); + return __inline_strncpy(dest, src, n); } - diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index 76d2c2b8579a..8cce1736360d 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o -obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o +obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index edd31ce4f8d2..4545f363e641 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -34,7 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -51,11 +51,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -98,7 +98,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, - },{ + }, { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, /* Framework bus number */ @@ -145,7 +145,7 @@ static struct resource smc91x_resources[] = { .start = 0x20200300, .end = 0x20200300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF0, .end = IRQ_PF0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -194,11 +194,11 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x20308000, .end = 0x20308000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20308004, .end = 0x20308004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ, diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 0b522d95160d..0000b8f1239c 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -35,7 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -61,7 +61,7 @@ static struct resource smc91x_resources[] = { .start = 0x20310300, .end = 0x20310300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF9, .end = IRQ_PF9, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -85,11 +85,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index c0f43ccfbfb5..9bc1f0d0ab50 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -30,7 +30,7 @@ #include <linux/device.h> #include <linux/platform_device.h> -#include <asm/irq.h> +#include <linux/irq.h> /* * Name the Board for the /proc/cpuinfo @@ -53,11 +53,11 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTB, .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { /* * denotes the flag pin and is used directly if * CONFIG_IRQCHIP_DEMUX_GPIO is defined. diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 9a472fe15833..a9143c4cbdcd 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -37,7 +37,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -62,7 +62,7 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -83,7 +83,7 @@ static struct resource net2272_bfin_resources[] = { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF10, .end = IRQ_PF10, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -108,11 +108,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -229,19 +229,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_PBX) { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, - .controller_data= &spi_si3xxx_chip_info, + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 3, + .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, - .controller_data= &spi_si3xxx_chip_info, + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c index 99547c4c290e..6fd9cfd0a31b 100644 --- a/arch/blackfin/mach-bf533/cpu.c +++ b/arch/blackfin/mach-bf533/cpu.c @@ -79,8 +79,7 @@ static int bf533_target(struct cpufreq_policy *policy, int i; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target - (policy, bf533_freq_table, target_freq, relation, &index)) + if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index)) return -EINVAL; cclk_mhz = bf533_freq_table[index].frequency; vco_mhz = bf533_freq_table[index].index; diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c new file mode 100644 index 000000000000..6c909cf4f7bf --- /dev/null +++ b/arch/blackfin/mach-bf533/dma.c @@ -0,0 +1,95 @@ +/* + * File: arch/blackfin/mach-bf533/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPI: + ret_irq = IRQ_SPI; + break; + + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 7e2aa8d0f44f..7dd0e9c3a936 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -30,6 +30,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> +#include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach/mem_init.h> #endif @@ -96,6 +97,10 @@ ENTRY(__start) M2 = r0; M3 = r0; + trace_buffer_start(p0,r0); + P0 = R1; + R0 = R1; + #if CONFIG_DEBUG_KERNEL_START /* diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index a3e1789167be..7d79e0f9503d 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -28,8 +28,8 @@ */ #include <linux/module.h> +#include <linux/irq.h> #include <asm/blackfin.h> -#include <asm/irq.h> void program_IAR(void) { diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile index f32d44215bb7..7e7c9c8ac5b2 100644 --- a/arch/blackfin/mach-bf537/Makefile +++ b/arch/blackfin/mach-bf537/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 6a60618a78ec..a8f947b72754 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -35,7 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -53,11 +53,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -202,7 +202,7 @@ static struct resource smc91x_resources[] = { .start = 0x20200300, .end = 0x20200300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF14, .end = IRQ_PF14, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -223,11 +223,11 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x20308000, .end = 0x20308000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20308004, .end = 0x20308004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PG15, .end = IRQ_PG15, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -262,7 +262,7 @@ static struct resource net2272_bfin_resources[] = { .start = 0x20200000, .end = 0x20200000 + 0x100, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -283,7 +283,7 @@ static struct resource bfin_uart_resources[] = { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, diff --git a/arch/blackfin/mach-bf537/boards/eth_mac.c b/arch/blackfin/mach-bf537/boards/eth_mac.c index e129a08d63de..a725cc8a9290 100644 --- a/arch/blackfin/mach-bf537/boards/eth_mac.c +++ b/arch/blackfin/mach-bf537/boards/eth_mac.c @@ -20,8 +20,7 @@ #include <linux/module.h> #include <asm/blackfin.h> -#if defined(CONFIG_GENERIC_BOARD) \ - || defined(CONFIG_BFIN537_STAMP) +#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP) /* * Currently the MAC address is saved in Flash by U-Boot @@ -43,7 +42,7 @@ void get_bf537_ether_addr(char *addr) */ void get_bf537_ether_addr(char *addr) { - printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n",__FILE__); + printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__); } #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index fd57e7439e0f..648d984e98d6 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -35,9 +35,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> -#include <asm/bfin5xx_spi.h> +#include <linux/irq.h> #include <linux/usb_sl811.h> +#include <asm/bfin5xx_spi.h> /* * Name the Board for the /proc/cpuinfo @@ -54,19 +54,19 @@ static struct resource bfin_pcmcia_cf_resources[] = { .start = 0x20310000, /* IO PORT */ .end = 0x20312000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTA, .end = IRQ_PROG_INTA, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - },{ + }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - },{ + }, { .start = 6, /* Card Detect PF6 */ .end = 6, .flags = IORESOURCE_IRQ, @@ -95,11 +95,11 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTB, .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { /* * denotes the flag pin and is used directly if * CONFIG_IRQCHIP_DEMUX_GPIO is defined. @@ -123,15 +123,15 @@ static struct resource sl811_hcd_resources[] = { .start = 0x20340000, .end = 0x20340000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20340004, .end = 0x20340004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTA, .end = IRQ_PROG_INTA, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -179,15 +179,15 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x20360000, .end = 0x20360000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20360004, .end = 0x20360004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTA, .end = IRQ_PROG_INTA, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO, .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO, .flags = IORESOURCE_IRQ, @@ -228,7 +228,7 @@ static struct resource net2272_bfin_resources[] = { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -253,11 +253,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -375,7 +375,7 @@ static struct resource bfin_uart_resources[] = { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 8aaf76dfce80..8806f1230f2d 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -37,7 +37,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> #include <linux/usb_sl811.h> @@ -58,15 +58,15 @@ static struct resource bfin_pcmcia_cf_resources[] = { .start = 0x20310000, /* IO PORT */ .end = 0x20312000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - },{ + }, { .start = 6, /* Card Detect PF6 */ .end = 6, .flags = IORESOURCE_IRQ, @@ -95,7 +95,7 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, @@ -116,11 +116,11 @@ static struct resource sl811_hcd_resources[] = { .start = 0x20340000, .end = 0x20340000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20340004, .end = 0x20340004, .flags = IORESOURCE_MEM, - },{ + }, { .start = CONFIG_USB_SL811_BFIN_IRQ, .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -167,11 +167,11 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x20360000, .end = 0x20360000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20360004, .end = 0x20360004, .flags = IORESOURCE_MEM, - },{ + }, { .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -212,7 +212,7 @@ static struct resource net2272_bfin_resources[] = { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -238,11 +238,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -294,16 +294,6 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = { }; #endif -#if defined(CONFIG_PBX) -static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { - .ctl_reg = 0x4, /* send zero */ - .enable_dma = 0, - .bits_per_word = 8, - .cs_change_per_word = 1, -}; -#endif - - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .cs_change_per_word = 1, @@ -392,24 +382,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_PBX) - { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, - .controller_data= &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, - .controller_data= &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", @@ -451,7 +423,7 @@ static struct resource bfin_uart_resources[] = { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 3a29b4d15f25..9c43d7756510 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -37,12 +37,10 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif -#include <asm/irq.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/bfin5xx_spi.h> #include <linux/usb_sl811.h> - +#include <asm/bfin5xx_spi.h> #include <linux/spi/ad7877.h> /* @@ -85,7 +83,7 @@ static struct platform_device *bfin_isp1761_devices[] = { int __init bfin_isp1761_init(void) { - unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices); + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); @@ -107,15 +105,15 @@ static struct resource bfin_pcmcia_cf_resources[] = { .start = 0x20310000, /* IO PORT */ .end = 0x20312000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - },{ + }, { .start = 6, /* Card Detect PF6 */ .end = 6, .flags = IORESOURCE_IRQ, @@ -144,7 +142,7 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, @@ -159,17 +157,39 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { .start = 0x20340000, .end = 0x20340000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20340004, .end = 0x20340004, .flags = IORESOURCE_MEM, - },{ + }, { .start = CONFIG_USB_SL811_BFIN_IRQ, .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -216,11 +236,11 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x20360000, .end = 0x20360000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20360004, .end = 0x20360004, .flags = IORESOURCE_MEM, - },{ + }, { .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -261,7 +281,7 @@ static struct resource net2272_bfin_resources[] = { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -287,11 +307,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -361,7 +381,6 @@ static struct bfin5xx_spi_chip ad5304_chip_info = { #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { -// .cs_change_per_word = 1, .enable_dma = 0, .bits_per_word = 16, }; @@ -449,19 +468,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif #if defined(CONFIG_PBX) { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, - .controller_data= &spi_si3xxx_chip_info, + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 3, + .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, - .controller_data= &spi_si3xxx_chip_info, + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, #endif @@ -516,7 +535,7 @@ static struct resource bfin_uart_resources[] = { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, @@ -571,6 +590,10 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c new file mode 100644 index 000000000000..706cb97b0265 --- /dev/null +++ b/arch/blackfin/mach-bf537/dma.c @@ -0,0 +1,115 @@ +/* + * File: arch/blackfin/mach-bf537/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + + case CH_EMAC_RX: + ret_irq = IRQ_MAC_RX; + break; + + case CH_EMAC_TX: + ret_irq = IRQ_MAC_TX; + break; + + case CH_UART1_RX: + ret_irq = IRQ_UART1_RX; + break; + + case CH_UART1_TX: + ret_irq = IRQ_UART1_TX; + break; + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPI: + ret_irq = IRQ_SPI; + break; + + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 7d902bbd860f..429c8a1019da 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -30,6 +30,8 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> +#include <asm/trace.h> + #if CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach/mem_init.h> #endif @@ -93,6 +95,10 @@ ENTRY(__start) M2 = r0; M3 = r0; + trace_buffer_start(p0,r0); + P0 = R1; + R0 = R1; + /* Turn off the icache */ p0.l = (IMEM_CONTROL & 0xFFFF); p0.h = (IMEM_CONTROL >> 16); diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index 2dbf3df465d1..a8b915f202ec 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -28,8 +28,8 @@ */ #include <linux/module.h> +#include <linux/irq.h> #include <asm/blackfin.h> -#include <asm/irq.h> void program_IAR(void) { diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig new file mode 100644 index 000000000000..e78b03d56c7c --- /dev/null +++ b/arch/blackfin/mach-bf548/Kconfig @@ -0,0 +1,316 @@ +if (BF54x) + +menu "BF548 Specific Configuration" + +comment "Interrupt Priority Assignment" +menu "Priority" + +config IRQ_PLL_WAKEUP + int "IRQ_PLL_WAKEUP" + default 7 +config IRQ_DMAC0_ERR + int "IRQ_DMAC0_ERR" + default 7 +config IRQ_EPPI0_ERR + int "IRQ_EPPI0_ERR" + default 7 +config IRQ_SPORT0_ERR + int "IRQ_SPORT0_ERR" + default 7 +config IRQ_SPORT1_ERR + int "IRQ_SPORT1_ERR" + default 7 +config IRQ_SPI0_ERR + int "IRQ_SPI0_ERR" + default 7 +config IRQ_UART0_ERR + int "IRQ_UART0_ERR" + default 7 +config IRQ_RTC + int "IRQ_RTC" + default 8 +config IRQ_EPPI0 + int "IRQ_EPPI0" + default 8 +config IRQ_SPORT0_RX + int "IRQ_SPORT0_RX" + default 9 +config IRQ_SPORT0_TX + int "IRQ_SPORT0_TX" + default 9 +config IRQ_SPORT1_RX + int "IRQ_SPORT1_RX" + default 9 +config IRQ_SPORT1_TX + int "IRQ_SPORT1_TX" + default 9 +config IRQ_SPI0 + int "IRQ_SPI0" + default 10 +config IRQ_UART0_RX + int "IRQ_UART0_RX" + default 10 +config IRQ_UART0_TX + int "IRQ_UART0_TX" + default 10 +config IRQ_TIMER8 + int "IRQ_TIMER8" + default 11 +config IRQ_TIMER9 + int "IRQ_TIMER9" + default 11 +config IRQ_TIMER10 + int "IRQ_TIMER10" + default 11 +config IRQ_PINT0 + int "IRQ_PINT0" + default 12 +config IRQ_PINT1 + int "IRQ_PINT0" + default 12 +config IRQ_MDMAS0 + int "IRQ_MDMAS0" + default 13 +config IRQ_MDMAS1 + int "IRQ_DMDMAS1" + default 13 +config IRQ_WATCHDOG + int "IRQ_WATCHDOG" + default 13 +config IRQ_DMAC1_ERR + int "IRQ_DMAC1_ERR" + default 7 +config IRQ_SPORT2_ERR + int "IRQ_SPORT2_ERR" + default 7 +config IRQ_SPORT3_ERR + int "IRQ_SPORT3_ERR" + default 7 +config IRQ_MXVR_DATA + int "IRQ MXVR Data" + default 7 +config IRQ_SPI1_ERR + int "IRQ_SPI1_ERR" + default 7 +config IRQ_SPI2_ERR + int "IRQ_SPI2_ERR" + default 7 +config IRQ_UART1_ERR + int "IRQ_UART1_ERR" + default 7 +config IRQ_UART2_ERR + int "IRQ_UART2_ERR" + default 7 +config IRQ_CAN0_ERR + int "IRQ_CAN0_ERR" + default 7 +config IRQ_SPORT2_RX + int "IRQ_SPORT2_RX" + default 9 +config IRQ_SPORT2_TX + int "IRQ_SPORT2_TX" + default 9 +config IRQ_SPORT3_RX + int "IRQ_SPORT3_RX" + default 9 +config IRQ_SPORT3_TX + int "IRQ_SPORT3_TX" + default 9 +config IRQ_EPPI1 + int "IRQ_EPPI1" + default 9 +config IRQ_EPPI2 + int "IRQ_EPPI2" + default 9 +config IRQ_SPI1 + int "IRQ_SPI1" + default 10 +config IRQ_SPI2 + int "IRQ_SPI2" + default 10 +config IRQ_UART1_RX + int "IRQ_UART1_RX" + default 10 +config IRQ_UART1_TX + int "IRQ_UART1_TX" + default 10 +config IRQ_ATAPI_RX + int "IRQ_ATAPI_RX" + default 10 +config IRQ_ATAPI_TX + int "IRQ_ATAPI_TX" + default 10 +config IRQ_TWI0 + int "IRQ_TWI0" + default 11 +config IRQ_TWI1 + int "IRQ_TWI1" + default 11 +config IRQ_CAN0_RX + int "IRQ_CAN_RX" + default 11 +config IRQ_CAN0_TX + int "IRQ_CAN_TX" + default 11 +config IRQ_MDMAS2 + int "IRQ_MDMAS2" + default 13 +config IRQ_MDMAS3 + int "IRQ_DMMAS3" + default 13 +config IRQ_MXVR_ERR + int "IRQ_MXVR_ERR" + default 11 +config IRQ_MXVR_MSG + int "IRQ_MXVR_MSG" + default 11 +config IRQ_MXVR_PKT + int "IRQ_MXVR_PKT" + default 11 +config IRQ_EPPI1_ERR + int "IRQ_EPPI1_ERR" + default 7 +config IRQ_EPPI2_ERR + int "IRQ_EPPI2_ERR" + default 7 +config IRQ_UART3_ERR + int "IRQ_UART3_ERR" + default 7 +config IRQ_HOST_ERR + int "IRQ_HOST_ERR" + default 7 +config IRQ_PIXC_ERR + int "IRQ_PIXC_ERR" + default 7 +config IRQ_NFC_ERR + int "IRQ_NFC_ERR" + default 7 +config IRQ_ATAPI_ERR + int "IRQ_ATAPI_ERR" + default 7 +config IRQ_CAN1_ERR + int "IRQ_CAN1_ERR" + default 7 +config IRQ_HS_DMA_ERR + int "IRQ Handshake DMA Status" + default 7 +config IRQ_PIXC_IN0 + int "IRQ PIXC IN0" + default 8 +config IRQ_PIXC_IN1 + int "IRQ PIXC IN1" + default 8 +config IRQ_PIXC_OUT + int "IRQ PIXC OUT" + default 8 +config IRQ_SDH + int "IRQ SDH" + default 8 +config IRQ_CNT + int "IRQ CNT" + default 8 +config IRQ_KEY + int "IRQ KEY" + default 8 +config IRQ_CAN1_RX + int "IRQ CAN1 RX" + default 11 +config IRQ_CAN1_TX + int "IRQ_CAN1_TX" + default 11 +config IRQ_SDH_MASK0 + int "IRQ_SDH_MASK0" + default 11 +config IRQ_SDH_MASK1 + int "IRQ_SDH_MASK1" + default 11 +config IRQ_USB_INT0 + int "IRQ USB INT0" + default 11 +config IRQ_USB_INT1 + int "IRQ USB INT1" + default 11 +config IRQ_USB_INT2 + int "IRQ USB INT2" + default 11 +config IRQ_USB_DMA + int "IRQ USB DMA" + default 11 +config IRQ_OTPSEC + int "IRQ OPTSEC" + default 11 +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 11 +config IRQ_TIMER1 + int "IRQ_TIMER1" + default 11 +config IRQ_TIMER2 + int "IRQ_TIMER2" + default 11 +config IRQ_TIMER3 + int "IRQ_TIMER3" + default 11 +config IRQ_TIMER4 + int "IRQ_TIMER4" + default 11 +config IRQ_TIMER5 + int "IRQ_TIMER5" + default 11 +config IRQ_TIMER6 + int "IRQ_TIMER6" + default 11 +config IRQ_TIMER7 + int "IRQ_TIMER7" + default 11 +config IRQ_PINT2 + int "IRQ_PIN2" + default 11 +config IRQ_PINT3 + int "IRQ_PIN3" + default 11 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +comment "Pin Interrupt to Port Assignment" +menu "Assignment" + +config PINTx_REASSIGN + bool "Reprogram PINT Assignment" + default n + help + The interrupt assignment registers controls the pin-to-interrupt + assignment in a byte-wide manner. Each option allows you to select + a set of pins (High/Low Byte) of an specific Port being mapped + to one of the four PIN Interrupts IRQ_PINTx. + + You shouldn't change any of these unless you know exactly what you're doing. + Please consult the Blackfin BF54x Processor Hardware Reference Manual. + +config PINT0_ASSIGN + hex "PINT0_ASSIGN" + depends on PINTx_REASSIGN + default 0x00000101 +config PINT1_ASSIGN + hex "PINT1_ASSIGN" + depends on PINTx_REASSIGN + default 0x01010000 +config PINT2_ASSIGN + hex "PINT2_ASSIGN" + depends on PINTx_REASSIGN + default 0x00000101 +config PINT3_ASSIGN + hex "PINT3_ASSIGN" + depends on PINTx_REASSIGN + default 0x02020303 + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile new file mode 100644 index 000000000000..060ad78ebf1d --- /dev/null +++ b/arch/blackfin/mach-bf548/Makefile @@ -0,0 +1,9 @@ +# +# arch/blackfin/mach-bf537/Makefile +# + +extra-y := head.o + +obj-y := ints-priority.o dma.o gpio.o + +obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile new file mode 100644 index 000000000000..486e07c99a51 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf548/boards/Makefile +# + +obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c new file mode 100644 index 000000000000..96ad95fab1a8 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -0,0 +1,114 @@ +/* + * File: arch/blackfin/mach-bf548/boards/ezkit.c + * Based on: arch/blackfin/mach-bf537/boards/ezkit.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/bfin5xx_spi.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "ADSP-BF548-EZKIT"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +static struct platform_device *ezkit_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + return 0; +} + +arch_initcall(stamp_init); diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S new file mode 100644 index 000000000000..f47daf3770d0 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/led.S @@ -0,0 +1,172 @@ +/**************************************************** + * LED1 ---- PG6 LED2 ---- PG7 * + * LED3 ---- PG8 LED4 ---- PG9 * + * LED5 ---- PG10 LED6 ---- PG11 * + ****************************************************/ + +#include <linux/linkage.h> +#include <asm/blackfin.h> + +/* All functions in this file save the registers they uses. + So there is no need to save any registers before calling them. */ + + .text; + +/* Initialize LEDs. */ + +ENTRY(_led_init) + LINK 0; + [--SP] = P0; + [--SP] = R0; + [--SP] = R1; + [--SP] = R2; + R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z); + R2 = ~R1; + + P0.H = hi(PORTG_FER); + P0.L = lo(PORTG_FER); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R2; + W[P0] = R0.L; + SSYNC; + + P0.H = hi(PORTG_DIR_SET); + P0.L = lo(PORTG_DIR_SET); + W[P0] = R1.L; + SSYNC; + + P0.H = hi(PORTG_INEN); + P0.L = lo(PORTG_INEN); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R2; + W[P0] = R0.L; + SSYNC; + + R2 = [SP++]; + R1 = [SP++]; + R0 = [SP++]; + P0 = [SP++]; + RTS; + .size _led_init, .-_led_init + +/* Set one LED on. Leave other LEDs unchanged. + It expects the LED number passed through R0. */ + +ENTRY(_led_on) + LINK 0; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTG_SET); + P0.L = lo(PORTG_SET); + W[P0] = R1.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_on, .-_led_on + +/* Set one LED off. Leave other LEDs unchanged. */ + +ENTRY(_led_off) + LINK 0; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTG_CLEAR); + P0.L = lo(PORTG_CLEAR); + W[P0] = R1.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_off, .-_led_off + +/* Toggle one LED. Leave other LEDs unchanged. */ + +ENTRY(_led_toggle) + LINK 0; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTG); + P0.L = lo(PORTG); + R0 = W[P0](Z); + SSYNC; + R0 = R0 ^ R1; + W[P0] = R0.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_toggle, .-_led_toggle + +/* Display the number using LEDs in binary format. */ + +ENTRY(_led_disp_num) + LINK 0; + [--SP] = P0; + [--SP] = R1; + [--SP] = R2; + CALL _led_init; + R1 = 0x3f(X); + R0 = R0 & R1; + R2 = 6(X); + R0 <<= R2; + R1 <<= R2; + P0.H = hi(PORTG); + P0.L = lo(PORTG); + R2 = W[P0](Z); + SSYNC; + R1 = ~R1; + R2 = R2 & R1; + R2 = R2 | R0; + W[P0] = R2.L; + SSYNC; + R2 = [SP++]; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_disp_num, .-_led_disp_num + +/* Toggle the number using LEDs in binary format. */ + +ENTRY(_led_toggle_num) + LINK 0; + [--SP] = P0; + [--SP] = R1; + [--SP] = R2; + CALL _led_init; + R1 = 0x3f(X); + R0 = R0 & R1; + R1 = 6(X); + R0 <<= R1; + P0.H = hi(PORTG); + P0.L = lo(PORTG); + R1 = W[P0](Z); + SSYNC; + R1 = R1 ^ R0; + W[P0] = R1.L; + SSYNC; + R2 = [SP++]; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_toggle_num, .-_led_toggle_num + diff --git a/arch/blackfin/mach-bf548/cpu.c b/arch/blackfin/mach-bf548/cpu.c new file mode 100644 index 000000000000..4298a3ccfbfc --- /dev/null +++ b/arch/blackfin/mach-bf548/cpu.c @@ -0,0 +1,159 @@ +/* + * File: arch/blackfin/mach-bf548/cpu.c + * Based on: + * Author: + * + * Created: + * Description: clock scaling for the bf54x + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <asm/dpmc.h> +#include <linux/fs.h> +#include <asm/bfin-global.h> + +/* CONFIG_CLKIN_HZ=25000000 */ +#define VCO5 (CONFIG_CLKIN_HZ*45) +#define VCO4 (CONFIG_CLKIN_HZ*36) +#define VCO3 (CONFIG_CLKIN_HZ*27) +#define VCO2 (CONFIG_CLKIN_HZ*18) +#define VCO1 (CONFIG_CLKIN_HZ*9) +#define VCO(x) VCO##x + +#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} +/* frequency */ +static struct cpufreq_frequency_table bf548_freq_table[] = { + MFREQ(1), + MFREQ(3), + {VCO4, VCO4 / 2}, {VCO4, VCO4}, + MFREQ(5), + {0, CPUFREQ_TABLE_END}, +}; + +/* + * dpmc_fops->ioctl() + * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) + */ +static int bf548_getfreq(unsigned int cpu) +{ + unsigned long cclk_mhz; + + /* The driver only support single cpu */ + if (cpu == 0) + dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); + else + cclk_mhz = -1; + + return cclk_mhz; +} + +static int bf548_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned long cclk_mhz; + unsigned long vco_mhz; + unsigned long flags; + unsigned int index; + struct cpufreq_freqs freqs; + + if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index)) + return -EINVAL; + + cclk_mhz = bf548_freq_table[index].frequency; + vco_mhz = bf548_freq_table[index].index; + + dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); + freqs.old = bf548_getfreq(0); + freqs.new = cclk_mhz; + freqs.cpu = 0; + + pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", + cclk_mhz, vco_mhz, index, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); + local_irq_restore(flags); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + vco_mhz = get_vco(); + cclk_mhz = get_cclk(); + return 0; +} + +/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on + * this platform, anyway. + */ +static int bf548_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &bf548_freq_table); +} + +static int __init __bf548_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + /*Now ,only support one cpu */ + policy->cur = bf548_getfreq(0); + cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table); +} + +static struct freq_attr *bf548_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bf548_driver = { + .verify = bf548_verify_speed, + .target = bf548_target, + .get = bf548_getfreq, + .init = __bf548_cpu_init, + .name = "bf548", + .owner = THIS_MODULE, + .attr = bf548_freq_attr, +}; + +static int __init bf548_cpu_init(void) +{ + return cpufreq_register_driver(&bf548_driver); +} + +static void __exit bf548_cpu_exit(void) +{ + cpufreq_unregister_driver(&bf548_driver); +} + +MODULE_AUTHOR("Mickael Kang"); +MODULE_DESCRIPTION("cpufreq driver for BF548 CPU"); +MODULE_LICENSE("GPL"); + +module_init(bf548_cpu_init); +module_exit(bf548_cpu_exit); diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c new file mode 100644 index 000000000000..a8184113be48 --- /dev/null +++ b/arch/blackfin/mach-bf548/dma.c @@ -0,0 +1,156 @@ +/* + * File: arch/blackfin/mach-bf561/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <asm/blackfin.h> +#include <asm/dma.h> + + struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) DMA12_NEXT_DESC_PTR, + (struct dma_register *) DMA13_NEXT_DESC_PTR, + (struct dma_register *) DMA14_NEXT_DESC_PTR, + (struct dma_register *) DMA15_NEXT_DESC_PTR, + (struct dma_register *) DMA16_NEXT_DESC_PTR, + (struct dma_register *) DMA17_NEXT_DESC_PTR, + (struct dma_register *) DMA18_NEXT_DESC_PTR, + (struct dma_register *) DMA19_NEXT_DESC_PTR, + (struct dma_register *) DMA20_NEXT_DESC_PTR, + (struct dma_register *) DMA21_NEXT_DESC_PTR, + (struct dma_register *) DMA22_NEXT_DESC_PTR, + (struct dma_register *) DMA23_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D2_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S2_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D3_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S3_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + case CH_SPI0: + ret_irq = IRQ_SPI0; + break; + case CH_SPI1: + ret_irq = IRQ_SPI1; + break; + case CH_UART0_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART0_TX: + ret_irq = IRQ_UART_TX; + break; + case CH_UART1_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART1_TX: + ret_irq = IRQ_UART_TX; + break; + case CH_EPPI0: + ret_irq = IRQ_EPPI0; + break; + case CH_EPPI1: + ret_irq = IRQ_EPPI1; + break; + case CH_EPPI2: + ret_irq = IRQ_EPPI2; + break; + case CH_PIXC_IMAGE: + ret_irq = IRQ_PIXC_IN0; + break; + case CH_PIXC_OVERLAY: + ret_irq = IRQ_PIXC_IN1; + break; + case CH_PIXC_OUTPUT: + ret_irq = IRQ_PIXC_OUT; + break; + case CH_SPORT2_RX: + ret_irq = IRQ_SPORT2_RX; + break; + case CH_SPORT2_TX: + ret_irq = IRQ_SPORT2_TX; + break; + case CH_SPORT3_RX: + ret_irq = IRQ_SPORT3_RX; + break; + case CH_SPORT3_TX: + ret_irq = IRQ_SPORT3_TX; + break; + case CH_SDH: + ret_irq = IRQ_SDH; + break; + case CH_SPI2: + ret_irq = IRQ_SPI2; + break; + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MDMAS0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MDMAS1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MDMAS2; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MDMAS3; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c new file mode 100644 index 000000000000..0da5f0003b8c --- /dev/null +++ b/arch/blackfin/mach-bf548/gpio.c @@ -0,0 +1,323 @@ +/* + * File: arch/blackfin/mach-bf548/gpio.c + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: GPIO Abstraction Layer + * + * Modified: + * Copyright 2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> +#include <linux/irq.h> + +static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +}; + +static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +inline int check_gpio(unsigned short gpio) +{ + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 + || gpio == GPIO_PH14 || gpio == GPIO_PH15 + || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 + || gpio > MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} + +inline void portmux_setup(unsigned short portno, unsigned short function) +{ + u32 pmux; + + pmux = gpio_array[gpio_bank(portno)]->port_mux; + + pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); + + gpio_array[gpio_bank(portno)]->port_mux = pmux; + +} + +inline u16 get_portmux(unsigned short portno) +{ + u32 pmux; + + pmux = gpio_array[gpio_bank(portno)]->port_mux; + + return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); + +} + +static void port_setup(unsigned short gpio, unsigned short usage) +{ + if (usage == GPIO_USAGE) { + if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio)) + printk(KERN_WARNING + "bfin-gpio: Possible Conflict with Peripheral " + "usage and GPIO %d detected!\n", gpio); + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + } else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); + SSYNC(); +} + +static int __init bfin_gpio_init(void) +{ + printk(KERN_INFO "Blackfin GPIO Controller\n"); + + return 0; +} + +arch_initcall(bfin_gpio_init); + +int peripheral_request(unsigned short per, const char *label) +{ + unsigned long flags; + unsigned short ident = P_IDENT(per); + + if (!(per & P_DEFINED)) + return -ENODEV; + + if (check_gpio(ident) < 0) + return -EINVAL; + + local_irq_save(flags); + + if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + printk(KERN_ERR + "%s: Peripheral %d is already reserved as GPIO!\n", + __FUNCTION__, per); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + + if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { + + u16 funct = get_portmux(ident); + + if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + printk(KERN_ERR + "%s: Peripheral %d is already reserved!\n", + __FUNCTION__, per); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + } + + reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); + + portmux_setup(ident, P_FUNCT2MUX(per)); + port_setup(ident, PERIPHERAL_USAGE); + + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(peripheral_request); + +int peripheral_request_list(unsigned short per[], const char *label) +{ + + u16 cnt; + int ret; + + for (cnt = 0; per[cnt] != 0; cnt++) { + ret = peripheral_request(per[cnt], label); + if (ret < 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL(peripheral_request_list); + +void peripheral_free(unsigned short per) +{ + unsigned long flags; + unsigned short ident = P_IDENT(per); + + if (!(per & P_DEFINED)) + return; + + if (check_gpio(ident) < 0) + return; + + local_irq_save(flags); + + if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { + printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per); + dump_stack(); + local_irq_restore(flags); + return; + } + + if (!(per & P_MAYSHARE)) { + port_setup(ident, GPIO_USAGE); + } + + reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(peripheral_free); + +void peripheral_free_list(unsigned short per[]) +{ + u16 cnt; + + for (cnt = 0; per[cnt] != 0; cnt++) { + peripheral_free(per[cnt]); + } + +} +EXPORT_SYMBOL(peripheral_free_list); + +/*********************************************************** +* +* FUNCTIONS: Blackfin GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: Blackfin GPIO Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int gpio_request(unsigned short gpio, const char *label) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + local_irq_save(flags); + + if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + + if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + + reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); + + local_irq_restore(flags); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned short gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return; + + local_irq_save(flags); + + if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return; + } + + reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_free); + +void gpio_direction_input(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_input); + +void gpio_direction_output(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_output); + +void gpio_set_value(unsigned short gpio, unsigned short arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); + +} +EXPORT_SYMBOL(gpio_set_value); + +unsigned short gpio_get_value(unsigned short gpio) +{ + return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(gpio_get_value); diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S new file mode 100644 index 000000000000..06751ae8b857 --- /dev/null +++ b/arch/blackfin/mach-bf548/head.S @@ -0,0 +1,512 @@ +/* + * File: arch/blackfin/mach-bf548/head.S + * Based on: arch/blackfin/mach-bf537/head.S + * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne + * + * Created: 1998 + * Description: Startup code for Blackfin BF548 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/linkage.h> +#include <asm/blackfin.h> +#include <asm/trace.h> +#if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach/mem_init.h> +#endif + +.global __rambase +.global __ramstart +.global __ramend +.extern ___bss_stop +.extern ___bss_start +.extern _bf53x_relocate_l1_mem + +#define INITIAL_STACK 0xFFB01000 + +.text + +ENTRY(__start) +ENTRY(__stext) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Set the SYSCFG register */ + R0 = 0x36; + SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + R0 = 0; + + /* Clear Out All the data and pointer Registers*/ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers*/ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + trace_buffer_start(p0,r0); + P0 = R1; + R0 = R1; + + /* Turn off the icache */ + p0.l = (IMEM_CONTROL & 0xFFFF); + p0.h = (IMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Turn off the dcache */ + p0.l = (DMEM_CONTROL & 0xFFFF); + p0.h = (DMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Initialize stack pointer */ + SP.L = LO(INITIAL_STACK); + SP.H = HI(INITIAL_STACK); + FP = SP; + USP = SP; + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#if CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + /* Code for initializing Async memory banks */ + + p2.h = hi(EBIU_AMBCTL1); + p2.l = lo(EBIU_AMBCTL1); + r0.h = hi(AMBCTL1VAL); + r0.l = lo(AMBCTL1VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMBCTL0); + p2.l = lo(EBIU_AMBCTL0); + r0.h = hi(AMBCTL0VAL); + r0.l = lo(AMBCTL0VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMGCTL); + p2.l = lo(EBIU_AMGCTL); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if defined (ANOMALY_05000281) + nop; + nop; + nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; + +ENTRY(_real_start) + [ -- sp ] = reti; + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; /* watchdog off for now */ + ssync; + + /* Code update for BSS size == 0 + * Zero out the bss region. + */ + + p1.l = ___bss_start; + p1.h = ___bss_start; + p2.l = ___bss_stop; + p2.h = ___bss_stop; + r0 = 0; + p2 -= p1; + lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; +.L_clear_bss: + B[p1++] = r0; + + /* In case there is a NULL pointer reference + * Zero out region before stext + */ + + p1.l = 0x0; + p1.h = 0x0; + r0.l = __stext; + r0.h = __stext; + r0 = r0 >> 1; + p2 = r0; + r0 = 0; + lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; +.L_clear_zero: + W[p1++] = r0; + + /* pass the uboot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + p1.l = __rambase; + p1.h = __rambase; + r0.l = __sdata; + r0.h = __sdata; + [p1] = r0; + + p1.l = __ramstart; + p1.h = __ramstart; + p3.l = ___bss_stop; + p3.h = ___bss_stop; + + r1 = p3; + [p1] = r1; + + + /* + * load the current thread pointer and stack + */ + r1.l = _init_thread_union; + r1.h = _init_thread_union; + + r2.l = 0x2000; + r2.h = 0x0000; + r1 = r1 + r2; + sp = r1; + usp = sp; + fp = sp; + call _start_kernel; +.L_exit: + jump.s .L_exit; + +.section .l1.text +#if CONFIG_BFIN_KERNEL_CLOCK +ENTRY(_start_dma_code) + + /* Enable PHY CLK buffer output */ + p0.h = hi(VR_CTL); + p0.l = lo(VR_CTL); + r0.l = w[p0]; + bitset(r0, 14); + w[p0] = r0.l; + ssync; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + r0.h = 0x0; + [p0] = r0; + SSYNC; + + /* + * Set PLL_CTL + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +.Lcheck_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump .Lcheck_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump .Lskip; + NOP; + BITSET (R0, 23); +.Lskip: + [P2] = R0; + SSYNC; + + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + R1 = [p2]; + R1 = R1 | R0; + [P2] = R1; + SSYNC; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = lo(IWR_ENABLE_ALL); + r0.h = hi(IWR_ENABLE_ALL); + [p0] = r0; + SSYNC; + + RTS; +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +ENTRY(_bfin_reset) + /* No more interrupts to be handled*/ + CLI R6; + SSYNC; + +#if defined(CONFIG_MTD_M25P80) +/* + * The following code fix the SPI flash reboot issue, + * /CS signal of the chip which is using PF10 return to GPIO mode + */ + p0.h = hi(PORTF_FER); + p0.l = lo(PORTF_FER); + r0.l = 0x0000; + w[p0] = r0.l; + SSYNC; + +/* /CS return to high */ + p0.h = hi(PORTFIO); + p0.l = lo(PORTFIO); + r0.l = 0xFFFF; + w[p0] = r0.l; + SSYNC; + +/* Delay some time, This is necessary */ + r1.h = 0; + r1.l = 0x400; + p1 = r1; + lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; +_delay_lab1: + r0.h = 0; + r0.l = 0x8000; + p0 = r0; + lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; +_delay_lab0: + nop; +_delay_lab0_end: + nop; +_delay_lab1_end: + nop; +#endif + + /* Clear the bits 13-15 in SWRST if they werent cleared */ + p0.h = hi(SWRST); + p0.l = lo(SWRST); + csync; + r0.l = w[p0]; + + /* Clear the IMASK register */ + p0.h = hi(IMASK); + p0.l = lo(IMASK); + r0 = 0x0; + [p0] = r0; + + /* Clear the ILAT register */ + p0.h = hi(ILAT); + p0.l = lo(ILAT); + r0 = [p0]; + [p0] = r0; + SSYNC; + + /* Disable the WDOG TIMER */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0xAD6; + w[p0] = r0.l; + SSYNC; + + /* Clear the sticky bit incase it is already set */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0x8AD6; + w[p0] = r0.l; + SSYNC; + + /* Program the count value */ + R0.l = 0x100; + R0.h = 0x0; + P0.h = hi(WDOG_CNT); + P0.l = lo(WDOG_CNT); + [P0] = R0; + SSYNC; + + /* Program WDOG_STAT if necessary */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + CC = BITTST(R0,1); + if !CC JUMP .LWRITESTAT; + CC = BITTST(R0,2); + if !CC JUMP .LWRITESTAT; + JUMP .LSKIP_WRITE; + +.LWRITESTAT: + /* When watch dog timer is enabled, + * a write to STAT will load the contents of CNT to STAT + */ + R0 = 0x0000(z); + P0.h = hi(WDOG_STAT); + P0.l = lo(WDOG_STAT) + [P0] = R0; + SSYNC; + +.LSKIP_WRITE: + /* Enable the reset event */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + BITCLR(R0,1); + BITCLR(R0,2); + W[P0] = R0.L; + SSYNC; + NOP; + + /* Enable the wdog counter */ + R0 = W[P0](Z); + BITCLR(R0,4); + W[P0] = R0.L; + SSYNC; + + IDLE; + + RTS; + +.data + +/* + * Set up the usable of RAM stuff. Size of RAM is determined then + * an initial stack set up at the end. + */ + +.align 4 +__rambase: +.long 0 +__ramstart: +.long 0 +__ramend: +.long 0 diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c new file mode 100644 index 000000000000..cb0ebac53c79 --- /dev/null +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -0,0 +1,137 @@ +/* + * File: arch/blackfin/mach-bf537/ints-priority.c + * Based on: arch/blackfin/mach-bf533/ints-priority.c + * Author: Michael Hennerich + * + * Created: + * Description: Set up the interupt priorities + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <asm/blackfin.h> + +void program_IAR(void) +{ + /* Program the IAR0 Register with the configured priority */ + bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | + ((CONFIG_IRQ_DMAC0_ERR - 7) << IRQ_DMAC0_ERR_POS) | + ((CONFIG_IRQ_EPPI0_ERR - 7) << IRQ_EPPI0_ERR_POS) | + ((CONFIG_IRQ_SPORT0_ERR - 7) << IRQ_SPORT0_ERR_POS) | + ((CONFIG_IRQ_SPORT1_ERR - 7) << IRQ_SPORT1_ERR_POS) | + ((CONFIG_IRQ_SPI0_ERR - 7) << IRQ_SPI0_ERR_POS) | + ((CONFIG_IRQ_UART0_ERR - 7) << IRQ_UART0_ERR_POS) | + ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS)); + + bfin_write_SIC_IAR1(((CONFIG_IRQ_EPPI0 - 7) << IRQ_EPPI0_POS) | + ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) | + ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) | + ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) | + ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) | + ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) | + ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) | + ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS)); + + bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) | + ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) | + ((CONFIG_IRQ_PINT0 - 7) << IRQ_PINT0_POS) | + ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) | + ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) | + ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) | + ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS)); + + bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) | + ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) | + ((CONFIG_IRQ_SPORT3_ERR - 7) << IRQ_SPORT3_ERR_POS) | + ((CONFIG_IRQ_MXVR_DATA - 7) << IRQ_MXVR_DATA_POS) | + ((CONFIG_IRQ_SPI1_ERR - 7) << IRQ_SPI1_ERR_POS) | + ((CONFIG_IRQ_SPI2_ERR - 7) << IRQ_SPI2_ERR_POS) | + ((CONFIG_IRQ_UART1_ERR - 7) << IRQ_UART1_ERR_POS) | + ((CONFIG_IRQ_UART2_ERR - 7) << IRQ_UART2_ERR_POS)); + + bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN0_ERR - 7) << IRQ_CAN0_ERR_POS) | + ((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) | + ((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) | + ((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) | + ((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) | + ((CONFIG_IRQ_EPPI1 - 7) << IRQ_EPPI1_POS) | + ((CONFIG_IRQ_EPPI2 - 7) << IRQ_EPPI2_POS) | + ((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS)); + + bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) | + ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) | + ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) | + ((CONFIG_IRQ_ATAPI_RX - 7) << IRQ_ATAPI_RX_POS) | + ((CONFIG_IRQ_ATAPI_TX - 7) << IRQ_ATAPI_TX_POS) | + ((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) | + ((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) | + ((CONFIG_IRQ_CAN0_RX - 7) << IRQ_CAN0_RX_POS)); + + bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN0_TX - 7) << IRQ_CAN0_TX_POS) | + ((CONFIG_IRQ_MDMAS2 - 7) << IRQ_MDMAS2_POS) | + ((CONFIG_IRQ_MDMAS3 - 7) << IRQ_MDMAS3_POS) | + ((CONFIG_IRQ_MXVR_ERR - 7) << IRQ_MXVR_ERR_POS) | + ((CONFIG_IRQ_MXVR_MSG - 7) << IRQ_MXVR_MSG_POS) | + ((CONFIG_IRQ_MXVR_PKT - 7) << IRQ_MXVR_PKT_POS) | + ((CONFIG_IRQ_EPPI1_ERR - 7) << IRQ_EPPI1_ERR_POS) | + ((CONFIG_IRQ_EPPI2_ERR - 7) << IRQ_EPPI2_ERR_POS)); + + bfin_write_SIC_IAR7(((CONFIG_IRQ_UART3_ERR - 7) << IRQ_UART3_ERR_POS) | + ((CONFIG_IRQ_HOST_ERR - 7) << IRQ_HOST_ERR_POS) | + ((CONFIG_IRQ_PIXC_ERR - 7) << IRQ_PIXC_ERR_POS) | + ((CONFIG_IRQ_NFC_ERR - 7) << IRQ_NFC_ERR_POS) | + ((CONFIG_IRQ_ATAPI_ERR - 7) << IRQ_ATAPI_ERR_POS) | + ((CONFIG_IRQ_CAN1_ERR - 7) << IRQ_CAN1_ERR_POS) | + ((CONFIG_IRQ_HS_DMA_ERR - 7) << IRQ_HS_DMA_ERR_POS)); + + bfin_write_SIC_IAR8(((CONFIG_IRQ_PIXC_IN0 - 7) << IRQ_PIXC_IN1_POS) | + ((CONFIG_IRQ_PIXC_IN1 - 7) << IRQ_PIXC_IN1_POS) | + ((CONFIG_IRQ_PIXC_OUT - 7) << IRQ_PIXC_OUT_POS) | + ((CONFIG_IRQ_SDH - 7) << IRQ_SDH_POS) | + ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) | + ((CONFIG_IRQ_KEY - 7) << IRQ_KEY_POS) | + ((CONFIG_IRQ_CAN1_RX - 7) << IRQ_CAN1_RX_POS) | + ((CONFIG_IRQ_CAN1_TX - 7) << IRQ_CAN1_TX_POS)); + + bfin_write_SIC_IAR9(((CONFIG_IRQ_SDH_MASK0 - 7) << IRQ_SDH_MASK0_POS) | + ((CONFIG_IRQ_SDH_MASK1 - 7) << IRQ_SDH_MASK1_POS) | + ((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) | + ((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) | + ((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) | + ((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS) | + ((CONFIG_IRQ_OTPSEC - 7) << IRQ_OTPSEC_POS)); + + bfin_write_SIC_IAR10(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS)); + + bfin_write_SIC_IAR11(((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | + ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) | + ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | + ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | + ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) | + ((CONFIG_IRQ_PINT2 - 7) << IRQ_PINT2_POS) | + ((CONFIG_IRQ_PINT3 - 7) << IRQ_PINT3_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile index 57f475a55161..f39235a55783 100644 --- a/arch/blackfin/mach-bf561/Makefile +++ b/arch/blackfin/mach-bf561/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_BF561_COREB) += coreb.o diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 3dc5c042048c..5b2b544529a1 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -34,7 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -52,11 +52,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -186,7 +186,7 @@ static struct resource smc91x_resources[] = { .start = 0x28000300, .end = 0x28000300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF0, .end = IRQ_PF0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -206,11 +206,11 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x24008000, .end = 0x24008000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x24008004, .end = 0x24008004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF47, .end = IRQ_PF47, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -241,25 +241,25 @@ static struct platform_device isp1362_hcd_device = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, }; static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, }; #endif static struct platform_device *cm_bf561_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, + &bfin_uart_device, #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 9720b5c307ab..724191da20a2 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -30,10 +30,9 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <asm/irq.h> -#include <asm/bfin5xx_spi.h> -#include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/bfin5xx_spi.h> /* * Name the Board for the /proc/cpuinfo @@ -45,13 +44,13 @@ char *bfin_board_name = "ADDS-BF561-EZKIT"; #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) static struct resource bfin_isp1761_resources[] = { - [0] = { + { .name = "isp1761-regs", .start = ISP1761_BASE + 0x00000000, .end = ISP1761_BASE + 0x000fffff, .flags = IORESOURCE_MEM, }, - [1] = { + { .start = ISP1761_IRQ, .end = ISP1761_IRQ, .flags = IORESOURCE_IRQ, @@ -71,7 +70,7 @@ static struct platform_device *bfin_isp1761_devices[] = { int __init bfin_isp1761_init(void) { - unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices); + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); @@ -98,7 +97,7 @@ static struct resource smc91x_resources[] = { .start = 0x2C010300, .end = 0x2C010300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF9, .end = IRQ_PF9, @@ -116,18 +115,18 @@ static struct platform_device smc91x_device = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, }; static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, }; #endif @@ -176,7 +175,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &spi_bfin_master_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, + &bfin_uart_device, #endif }; diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c index 585ecdd2f6a5..4dfea5da674c 100644 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -30,7 +30,7 @@ #include <linux/device.h> #include <linux/platform_device.h> -#include <asm/irq.h> +#include <linux/irq.h> char *bfin_board_name = "UNKNOWN BOARD"; @@ -43,11 +43,11 @@ static struct resource smc91x_resources[] = { .start = 0x2C010300, .end = 0x2C010300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTB, .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { /* * denotes the flag pin and is used directly if * CONFIG_IRQCHIP_DEMUX_GPIO is defined. diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index db308c7ccabb..c442eb23db5e 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -14,7 +14,7 @@ #include <linux/device.h> #include <linux/platform_device.h> -#include <asm/irq.h> +#include <linux/irq.h> char *bfin_board_name = "Tepla-BF561"; @@ -26,11 +26,11 @@ static struct resource smc91x_resources[] = { .start = 0x2C000300, .end = 0x2C000320, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTB, .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { /* * denotes the flag pin and is used directly if * CONFIG_IRQCHIP_DEMUX_GPIO is defined. diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index b28582fe083c..5d1d21b4c2a7 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -32,8 +32,8 @@ #include <linux/device.h> #include <linux/ioport.h> #include <linux/module.h> +#include <linux/uaccess.h> #include <asm/dma.h> -#include <asm/uaccess.h> #define MODULE_VER "v0.1" @@ -202,7 +202,7 @@ static int coreb_open(struct inode *inode, struct file *file) spin_unlock_irq(&coreb_lock); return 0; - out_busy: + out_busy: spin_unlock_irq(&coreb_lock); return -EBUSY; } @@ -365,19 +365,19 @@ int __init bf561_coreb_init(void) printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER); return 0; - release_dma_src: + release_dma_src: free_dma(CH_MEM_STREAM2_SRC); - release_dma_dest: + release_dma_dest: free_dma(CH_MEM_STREAM2_DEST); - release_data_a_sram: + release_data_a_sram: release_mem_region(0xff400000, 0x8000); - release_data_b_sram: + release_data_b_sram: release_mem_region(0xff500000, 0x8000); - release_instruction_b_sram: + release_instruction_b_sram: release_mem_region(0xff610000, 0x4000); - release_instruction_a_sram: + release_instruction_a_sram: release_mem_region(0xff600000, 0x4000); - exit: + exit: return -ENOMEM; } diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c new file mode 100644 index 000000000000..89c65bb0bed3 --- /dev/null +++ b/arch/blackfin/mach-bf561/dma.c @@ -0,0 +1,131 @@ +/* + * File: arch/blackfin/mach-bf561/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA1_0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_1_NEXT_DESC_PTR, + (struct dma_register *) DMA1_2_NEXT_DESC_PTR, + (struct dma_register *) DMA1_3_NEXT_DESC_PTR, + (struct dma_register *) DMA1_4_NEXT_DESC_PTR, + (struct dma_register *) DMA1_5_NEXT_DESC_PTR, + (struct dma_register *) DMA1_6_NEXT_DESC_PTR, + (struct dma_register *) DMA1_7_NEXT_DESC_PTR, + (struct dma_register *) DMA1_8_NEXT_DESC_PTR, + (struct dma_register *) DMA1_9_NEXT_DESC_PTR, + (struct dma_register *) DMA1_10_NEXT_DESC_PTR, + (struct dma_register *) DMA1_11_NEXT_DESC_PTR, + (struct dma_register *) DMA2_0_NEXT_DESC_PTR, + (struct dma_register *) DMA2_1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_2_NEXT_DESC_PTR, + (struct dma_register *) DMA2_3_NEXT_DESC_PTR, + (struct dma_register *) DMA2_4_NEXT_DESC_PTR, + (struct dma_register *) DMA2_5_NEXT_DESC_PTR, + (struct dma_register *) DMA2_6_NEXT_DESC_PTR, + (struct dma_register *) DMA2_7_NEXT_DESC_PTR, + (struct dma_register *) DMA2_8_NEXT_DESC_PTR, + (struct dma_register *) DMA2_9_NEXT_DESC_PTR, + (struct dma_register *) DMA2_10_NEXT_DESC_PTR, + (struct dma_register *) DMA2_11_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI0: + ret_irq = IRQ_PPI0; + break; + case CH_PPI1: + ret_irq = IRQ_PPI1; + break; + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + case CH_SPI: + ret_irq = IRQ_SPI; + break; + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MEM_DMA2; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MEM_DMA3; + break; + + case CH_IMEM_STREAM0_SRC: + case CH_IMEM_STREAM0_DEST: + ret_irq = IRQ_IMEM_DMA0; + break; + case CH_IMEM_STREAM1_SRC: + case CH_IMEM_STREAM1_DEST: + ret_irq = IRQ_IMEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 31cbc75c85cf..2f08bcb2dded 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -30,6 +30,8 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> +#include <asm/trace.h> + #if CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach/mem_init.h> #endif @@ -93,6 +95,10 @@ ENTRY(__start) M2 = r0; M3 = r0; + trace_buffer_start(p0,r0); + P0 = R1; + R0 = R1; + /* Turn off the icache */ p0.l = (IMEM_CONTROL & 0xFFFF); p0.h = (IMEM_CONTROL >> 16); diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c index 86e3b0ee93f4..09b541b0f7c2 100644 --- a/arch/blackfin/mach-bf561/ints-priority.c +++ b/arch/blackfin/mach-bf561/ints-priority.c @@ -28,8 +28,8 @@ */ #include <linux/module.h> +#include <linux/irq.h> #include <asm/blackfin.h> -#include <asm/irq.h> void program_IAR(void) { diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index d3a49073d196..0279ede70392 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,9 +4,9 @@ obj-y := \ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ - interrupt.o lock.o dpmc.o irqpanic.o + interrupt.o lock.o irqpanic.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += pm.o dpmc.o diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S index 7924a90d9658..9d475623b724 100644 --- a/arch/blackfin/mach-common/cacheinit.S +++ b/arch/blackfin/mach-common/cacheinit.S @@ -38,104 +38,37 @@ .text +#ifdef ANOMALY_05000125 #if defined(CONFIG_BLKFIN_CACHE) -ENTRY(_bfin_icache_init) +ENTRY(_bfin_write_IMEM_CONTROL) - /* Initialize Instruction CPLBS */ - - I0.L = (ICPLB_ADDR0 & 0xFFFF); - I0.H = (ICPLB_ADDR0 >> 16); - - I1.L = (ICPLB_DATA0 & 0xFFFF); - I1.H = (ICPLB_DATA0 >> 16); - - I2.L = _icplb_table; - I2.H = _icplb_table; - - r1 = -1; /* end point comparison */ - r3 = 15; /* max counter */ - -/* read entries from table */ - -.Lread_iaddr: - R0 = [I2++]; - CC = R0 == R1; - IF CC JUMP .Lidone; - [I0++] = R0; - -.Lread_idata: - R2 = [I2++]; - [I1++] = R2; - R3 = R3 + R1; - CC = R3 == R1; - IF !CC JUMP .Lread_iaddr; - -.Lidone: /* Enable Instruction Cache */ P0.l = (IMEM_CONTROL & 0xFFFF); P0.h = (IMEM_CONTROL >> 16); - R1 = [P0]; - R0 = (IMC | ENICPLB); - R0 = R0 | R1; /* Anomaly 05000125 */ - CLI R2; + CLI R1; SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ .align 8; [P0] = R0; SSYNC; - STI R2; + STI R1; RTS; -ENDPROC(_bfin_icache_init) +ENDPROC(_bfin_write_IMEM_CONTROL) #endif #if defined(CONFIG_BLKFIN_DCACHE) -ENTRY(_bfin_dcache_init) - - /* Initialize Data CPLBS */ - - I0.L = (DCPLB_ADDR0 & 0xFFFF); - I0.H = (DCPLB_ADDR0 >> 16); - - I1.L = (DCPLB_DATA0 & 0xFFFF); - I1.H = (DCPLB_DATA0 >> 16); - - I2.L = _dcplb_table; - I2.H = _dcplb_table; - - R1 = -1; /* end point comparison */ - R3 = 15; /* max counter */ - - /* read entries from table */ -.Lread_daddr: - R0 = [I2++]; - cc = R0 == R1; - IF CC JUMP .Lddone; - [I0++] = R0; - -.Lread_ddata: - R2 = [I2++]; - [I1++] = R2; - R3 = R3 + R1; - CC = R3 == R1; - IF !CC JUMP .Lread_daddr; -.Lddone: - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R1 = [P0]; - - R0 = DMEM_CNTR; - - R0 = R0 | R1; - /* Anomaly 05000125 */ - CLI R2; +ENTRY(_bfin_write_DMEM_CONTROL) + CLI R1; SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ .align 8; [P0] = R0; SSYNC; - STI R2; + STI R1; RTS; -ENDPROC(_bfin_dcache_init) +ENDPROC(_bfin_write_DMEM_CONTROL) +#endif + #endif diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c index caa9623e6bd6..785ca9816971 100644 --- a/arch/blackfin/mach-common/cplbinfo.c +++ b/arch/blackfin/mach-common/cplbinfo.c @@ -31,11 +31,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/proc_fs.h> +#include <linux/uaccess.h> #include <asm/current.h> -#include <asm/uaccess.h> #include <asm/system.h> - #include <asm/cplb.h> #include <asm/blackfin.h> @@ -92,8 +91,7 @@ static char *cplb_print_entry(char *buf, int type) } else buf += sprintf(buf, "Data CPLB entry:\n"); - buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\ -\tiCount\toCount\n"); + buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\n\tiCount\toCount\n"); while (*p_addr != 0xffffffff) { entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); @@ -144,8 +142,7 @@ static int cplbinfo_proc_output(char *buf) p = buf; - p += sprintf(p, - "------------------ CPLB Information ------------------\n\n"); + p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); if (bfin_read_IMEM_CONTROL() & ENICPLB) p = cplb_print_entry(p, CPLB_I); @@ -191,9 +188,9 @@ static int __init cplbinfo_init(void) { struct proc_dir_entry *entry; - if ((entry = create_proc_entry("cplbinfo", 0, NULL)) == NULL) { + entry = create_proc_entry("cplbinfo", 0, NULL); + if (!entry) return -ENOMEM; - } entry->read_proc = cplbinfo_read_proc; entry->write_proc = cplbinfo_write_proc; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 40045b1386ad..d61bba98fb54 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -49,34 +49,15 @@ #include <linux/linkage.h> +#include <linux/unistd.h> #include <asm/blackfin.h> -#include <asm/unistd.h> #include <asm/errno.h> #include <asm/thread_info.h> /* TIF_NEED_RESCHED */ #include <asm/asm-offsets.h> +#include <asm/trace.h> #include <asm/mach-common/context.S> -#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE - /* - * TODO: this should be proper save/restore, but for now - * we'll just cheat and use 0x1/0x13 - */ -# define DEBUG_START_HWTRACE \ - P5.l = LO(TBUFCTL); \ - P5.h = HI(TBUFCTL); \ - R7 = 0x13; \ - [P5] = R7; -# define DEBUG_STOP_HWTRACE \ - P5.l = LO(TBUFCTL); \ - P5.h = HI(TBUFCTL); \ - R7 = 0x01; \ - [P5] = R7; -#else -# define DEBUG_START_HWTRACE -# define DEBUG_STOP_HWTRACE -#endif - #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else @@ -110,25 +91,14 @@ ENTRY(_ex_icplb) ASTAT = [sp++]; SAVE_ALL_SYS call __cplb_hdr; - DEBUG_START_HWTRACE + DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS SP = RETN; rtx; ENDPROC(_ex_icplb) -ENTRY(_ex_spinlock) - /* Transform this into a syscall - twiddle the syscall vector. */ - p5.l = lo(EVT15); - p5.h = hi(EVT15); - r7.l = _spinlock_bh; - r7.h = _spinlock_bh; - [p5] = r7; - csync; - /* Fall through. */ -ENDPROC(_ex_spinlock) - ENTRY(_ex_syscall) - DEBUG_START_HWTRACE + DEBUG_START_HWTRACE(p5, r7) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; raise 15; /* invoked by TRAP #0, for sys call */ @@ -136,26 +106,6 @@ ENTRY(_ex_syscall) rtx ENDPROC(_ex_syscall) -ENTRY(_spinlock_bh) - SAVE_ALL_SYS - /* To end up here, vector 15 was changed - so we have to change it - * back. - */ - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _evt_system_call; - p1.h = _evt_system_call; - [p0] = p1; - csync; - r0 = [sp + PT_R0]; - sp += -12; - call _sys_bfin_spinlock; - sp += 12; - [SP + PT_R0] = R0; - RESTORE_ALL_SYS - rti; -ENDPROC(_spinlock_bh) - ENTRY(_ex_soft_bp) r7 = retx; r7 += -2; @@ -186,7 +136,7 @@ ENTRY(_ex_single_step) if !cc jump _ex_trap_c; _return_from_exception: - DEBUG_START_HWTRACE + DEBUG_START_HWTRACE(p5, r7) #ifdef ANOMALY_05000257 R7=LC0; LC0=R7; @@ -208,7 +158,7 @@ ENTRY(_handle_bad_cplb) * need to make a CPLB exception look like a normal exception */ - DEBUG_START_HWTRACE + DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS [--sp] = ASTAT; [--sp] = (R7:6, P5:4); @@ -251,7 +201,7 @@ ENTRY(_ex_trap_c) R6 = SEQSTAT; [P5] = R6; - DEBUG_START_HWTRACE + DEBUG_START_HWTRACE(p5, r7) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SP = RETN; @@ -335,7 +285,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ /* Try to deal with syscalls quickly. */ [--sp] = ASTAT; [--sp] = (R7:6, P5:4); - DEBUG_STOP_HWTRACE + DEBUG_STOP_HWTRACE(p5, r7) r7 = SEQSTAT; /* reason code is in bit 5:0 */ r6.l = lo(SEQSTAT_EXCAUSE); r6.h = hi(SEQSTAT_EXCAUSE); @@ -741,6 +691,10 @@ _schedule_and_signal_from_int: r0 = [p0]; sti r0; + r0 = sp; + sp += -12; + call _finish_atomic_sections; + sp += 12; jump.s .Lresume_userspace; _schedule_and_signal: @@ -790,14 +744,14 @@ ENDPROC(_init_exception_buff) ALIGN _extable: /* entry for each EXCAUSE[5:0] - * This table bmust be in sync with the table in ./kernel/traps.c + * This table must be in sync with the table in ./kernel/traps.c * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */ .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ .long _ex_trap_c /* 0x02 - User Defined */ - .long _ex_trap_c /* 0x03 - User Defined - Atomic test and set service */ - .long _ex_spinlock /* 0x04 - User Defined */ + .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ + .long _ex_trap_c /* 0x04 - User Defined */ .long _ex_trap_c /* 0x05 - User Defined */ .long _ex_trap_c /* 0x06 - User Defined */ .long _ex_trap_c /* 0x07 - User Defined */ diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 8be548e061bf..203e20709163 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -34,6 +34,7 @@ #include <linux/linkage.h> #include <asm/entry.h> #include <asm/asm-offsets.h> +#include <asm/trace.h> #include <asm/mach-common/context.S> @@ -170,10 +171,9 @@ ENTRY(_evt_ivhw) r7.l = W[p5]; 1: #endif - p0.l = lo(TBUFCTL); - p0.h = hi(TBUFCTL); - r0 = 1; - [p0] = r0; + + trace_buffer_stop(p0, r0); + r0 = IRQ_HWERR; r1 = sp; diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 80943bbd37c2..6b9fd03ce835 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -183,7 +183,7 @@ static void bf561_gpio_ack_irq(unsigned int irq) { u16 gpionr = irq - IRQ_PF0; - if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { set_gpio_data(gpionr, 0); SSYNC(); } @@ -193,7 +193,7 @@ static void bf561_gpio_mask_ack_irq(unsigned int irq) { u16 gpionr = irq - IRQ_PF0; - if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { set_gpio_data(gpionr, 0); SSYNC(); } @@ -222,7 +222,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq) if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { ret = gpio_request(gpionr, NULL); - if(ret) + if (ret) return ret; } @@ -262,7 +262,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { ret = gpio_request(gpionr, NULL); - if(ret) + if (ret) return ret; } @@ -371,6 +371,9 @@ int __init init_arch_irq(void) bfin_write_SICA_IMASK1(SIC_UNMASK_ALL); SSYNC(); + bfin_write_SICA_IWR0(IWR_ENABLE_ALL); + bfin_write_SICA_IWR1(IWR_ENABLE_ALL); + local_irq_disable(); init_exception_buff(); @@ -393,7 +396,7 @@ int __init init_arch_irq(void) bfin_write_EVT15(evt_system_call); CSYNC(); - for (irq = 0; irq < SYS_IRQS; irq++) { + for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) set_irq_chip(irq, &bf561_core_irqchip); else diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 2cfc7d5aec5c..28a878c3577a 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -13,7 +13,7 @@ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> * 2003 Metrowerks/Motorola * 2003 Bas Vermeulen <bas@buyways.nl> - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -65,9 +65,9 @@ atomic_t num_spurious; struct ivgx { /* irq number for request_irq, available in mach-bf533/irq.h */ - int irqno; + unsigned int irqno; /* corresponding bit in the SIC_ISR register */ - int isrflag; + unsigned int isrflag; } ivg_table[NR_PERI_INTS]; struct ivg_slice { @@ -88,17 +88,16 @@ static void __init search_IAR(void) for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) { int irqn; - ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = - &ivg_table[irq_pos]; + ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos]; for (irqn = 0; irqn < NR_PERI_INTS; irqn++) { int iar_shift = (irqn & 7) * 4; if (ivg == (0xf & - bfin_read32((unsigned long *) SIC_IAR0 + + bfin_read32((unsigned long *)SIC_IAR0 + (irqn >> 3)) >> iar_shift)) { ivg_table[irq_pos].irqno = IVG7 + irqn; - ivg_table[irq_pos].isrflag = 1 << irqn; + ivg_table[irq_pos].isrflag = 1 << (irqn % 32); ivg7_13[ivg].istop++; irq_pos++; } @@ -141,15 +140,31 @@ static void bfin_core_unmask_irq(unsigned int irq) static void bfin_internal_mask_irq(unsigned int irq) { +#ifndef CONFIG_BF54x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << (irq - (IRQ_CORETMR + 1)))); +#else + unsigned mask_bank, mask_bit; + mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; + mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; + bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & + ~(1 << mask_bit)); +#endif SSYNC(); } static void bfin_internal_unmask_irq(unsigned int irq) { +#ifndef CONFIG_BF54x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << (irq - (IRQ_CORETMR + 1)))); +#else + unsigned mask_bank, mask_bit; + mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; + mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; + bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | + (1 << mask_bit)); +#endif SSYNC(); } @@ -206,7 +221,7 @@ static struct irq_chip bfin_generic_error_irqchip = { }; static void bfin_demux_error_irq(unsigned int int_err_irq, - struct irq_desc *intb_desc) + struct irq_desc *intb_desc) { int irq = 0; @@ -270,8 +285,8 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, } pr_debug("IRQ %d:" - " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", - irq); + " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", + irq); } } else printk(KERN_ERR @@ -279,11 +294,10 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", __FUNCTION__, __FILE__, __LINE__); - } #endif /* BF537_GENERIC_ERROR_INT_DEMUX */ -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO +#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x) static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -361,8 +375,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) } if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | - IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) - { + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { ret = gpio_request(gpionr, NULL); if (ret) @@ -407,7 +420,6 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) return 0; } - static struct irq_chip bfin_gpio_irqchip = { .ack = bfin_gpio_ack_irq, .mask = bfin_gpio_mask_irq, @@ -419,20 +431,20 @@ static struct irq_chip bfin_gpio_irqchip = { }; static void bfin_demux_gpio_irq(unsigned int intb_irq, - struct irq_desc *intb_desc) + struct irq_desc *intb_desc) { u16 i; + struct irq_desc *desc; - for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=16) { + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) { int irq = IRQ_PF0 + i; int flag_d = get_gpiop_data(i); int mask = - flag_d & (gpio_enabled[gpio_bank(i)] & - get_gpiop_maska(i)); + flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i)); while (mask) { if (mask & 1) { - struct irq_desc *desc = irq_desc + irq; + desc = irq_desc + irq; desc->handle_irq(irq, desc); } irq++; @@ -441,6 +453,264 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, } } +#else /* CONFIG_IRQCHIP_DEMUX_GPIO */ + +#define NR_PINT_SYS_IRQS 4 +#define NR_PINT_BITS 32 +#define NR_PINTS 160 +#define IRQ_NOT_AVAIL 0xFF + +#define PINT_2_BANK(x) ((x) >> 5) +#define PINT_2_BIT(x) ((x) & 0x1F) +#define PINT_BIT(x) (1 << (PINT_2_BIT(x))) + +static unsigned char irq2pint_lut[NR_PINTS]; +static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; + +struct pin_int_t { + unsigned int mask_set; + unsigned int mask_clear; + unsigned int request; + unsigned int assign; + unsigned int edge_set; + unsigned int edge_clear; + unsigned int invert_set; + unsigned int invert_clear; + unsigned int pinstate; + unsigned int latch; +}; + +static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { + (struct pin_int_t *)PINT0_MASK_SET, + (struct pin_int_t *)PINT1_MASK_SET, + (struct pin_int_t *)PINT2_MASK_SET, + (struct pin_int_t *)PINT3_MASK_SET, +}; + +unsigned short get_irq_base(u8 bank, u8 bmap) +{ + + u16 irq_base; + + if (bank < 2) { /*PA-PB */ + irq_base = IRQ_PA0 + bmap * 16; + } else { /*PC-PJ */ + irq_base = IRQ_PC0 + bmap * 16; + } + + return irq_base; + +} + + /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ +void init_pint_lut(void) +{ + u16 bank, bit, irq_base, bit_pos; + u32 pint_assign; + u8 bmap; + + memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut)); + + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { + + pint_assign = pint[bank]->assign; + + for (bit = 0; bit < NR_PINT_BITS; bit++) { + + bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF; + + irq_base = get_irq_base(bank, bmap); + + irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0); + bit_pos = bit + bank * NR_PINT_BITS; + + pint2irq_lut[bit_pos] = irq_base - SYS_IRQS; + irq2pint_lut[irq_base - SYS_IRQS] = bit_pos; + + } + + } + +} + +static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +static void bfin_gpio_ack_irq(unsigned int irq) +{ + u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + + pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val); + SSYNC(); +} + +static void bfin_gpio_mask_ack_irq(unsigned int irq) +{ + u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pintbit = PINT_BIT(pint_val); + u8 bank = PINT_2_BANK(pint_val); + + pint[bank]->request = pintbit; + pint[bank]->mask_clear = pintbit; + SSYNC(); +} + +static void bfin_gpio_mask_irq(unsigned int irq) +{ + u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + + pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val); + SSYNC(); +} + +static void bfin_gpio_unmask_irq(unsigned int irq) +{ + u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pintbit = PINT_BIT(pint_val); + u8 bank = PINT_2_BANK(pint_val); + + pint[bank]->request = pintbit; + pint[bank]->mask_set = pintbit; + SSYNC(); +} + +static unsigned int bfin_gpio_irq_startup(unsigned int irq) +{ + unsigned int ret; + u16 gpionr = irq - IRQ_PA0; + u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + + if (pint_val == IRQ_NOT_AVAIL) + return -ENODEV; + + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { + ret = gpio_request(gpionr, NULL); + if (ret) + return ret; + } + + gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); + bfin_gpio_unmask_irq(irq); + + return ret; +} + +static void bfin_gpio_irq_shutdown(unsigned int irq) +{ + bfin_gpio_mask_irq(irq); + gpio_free(irq - IRQ_PA0); + gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0); +} + +static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) +{ + + unsigned int ret; + u16 gpionr = irq - IRQ_PA0; + u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pintbit = PINT_BIT(pint_val); + u8 bank = PINT_2_BANK(pint_val); + + if (pint_val == IRQ_NOT_AVAIL) + return -ENODEV; + + if (type == IRQ_TYPE_PROBE) { + /* only probe unenabled GPIO interrupt lines */ + if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) + return 0; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { + ret = gpio_request(gpionr, NULL); + if (ret) + return ret; + } + + gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); + } else { + gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + return 0; + } + + gpio_direction_input(gpionr); + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + pint[bank]->edge_set = pintbit; + } else { + pint[bank]->edge_clear = pintbit; + } + + if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) + pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ + else + pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */ + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + pint[bank]->invert_set = pintbit; + else + pint[bank]->invert_set = pintbit; + + SSYNC(); + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + set_irq_handler(irq, handle_edge_irq); + else + set_irq_handler(irq, handle_level_irq); + + return 0; +} + +static struct irq_chip bfin_gpio_irqchip = { + .ack = bfin_gpio_ack_irq, + .mask = bfin_gpio_mask_irq, + .mask_ack = bfin_gpio_mask_ack_irq, + .unmask = bfin_gpio_unmask_irq, + .set_type = bfin_gpio_irq_type, + .startup = bfin_gpio_irq_startup, + .shutdown = bfin_gpio_irq_shutdown +}; + +static void bfin_demux_gpio_irq(unsigned int intb_irq, + struct irq_desc *intb_desc) +{ + u8 bank, pint_val; + u32 request, irq; + struct irq_desc *desc; + + switch (intb_irq) { + case IRQ_PINT0: + bank = 0; + break; + case IRQ_PINT2: + bank = 2; + break; + case IRQ_PINT3: + bank = 3; + break; + case IRQ_PINT1: + bank = 1; + break; + default: + return; + } + + pint_val = bank * NR_PINT_BITS; + + request = pint[bank]->request; + + while (request) { + if (request & 1) { + irq = pint2irq_lut[pint_val] + SYS_IRQS; + desc = irq_desc + irq; + desc->handle_irq(irq, desc); + } + pint_val++; + request >>= 1; + } + +} #endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ /* @@ -452,7 +722,18 @@ int __init init_arch_irq(void) int irq; unsigned long ilat = 0; /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ +#ifdef CONFIG_BF54x + bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); + bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); + bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +#else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); + bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif + SSYNC(); local_irq_disable(); @@ -475,7 +756,18 @@ int __init init_arch_irq(void) bfin_write_EVT15(evt_system_call); CSYNC(); - for (irq = 0; irq < SYS_IRQS; irq++) { +#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x) +#ifdef CONFIG_PINTx_REASSIGN + pint[0]->assign = CONFIG_PINT0_ASSIGN; + pint[1]->assign = CONFIG_PINT1_ASSIGN; + pint[2]->assign = CONFIG_PINT2_ASSIGN; + pint[3]->assign = CONFIG_PINT3_ASSIGN; +#endif + /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ + init_pint_lut(); +#endif + + for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) set_irq_chip(irq, &bfin_core_irqchip); else @@ -484,20 +776,42 @@ int __init init_arch_irq(void) if (irq != IRQ_GENERIC_ERROR) { #endif + switch (irq) { #ifdef CONFIG_IRQCHIP_DEMUX_GPIO - if ((irq != IRQ_PROG_INTA) /*PORT F & G MASK_A Interrupt*/ -# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) - && (irq != IRQ_MAC_RX) /*PORT H MASK_A Interrupt*/ -# endif - ) { +#ifndef CONFIG_BF54x + case IRQ_PROG_INTA: + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; +#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) + case IRQ_MAC_RX: + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; #endif - set_irq_handler(irq, handle_simple_irq); -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO - } else { +#else + case IRQ_PINT0: set_irq_chained_handler(irq, bfin_demux_gpio_irq); - } + break; + case IRQ_PINT1: + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; + case IRQ_PINT2: + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; + case IRQ_PINT3: + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; +#endif /*CONFIG_BF54x */ #endif + default: + set_irq_handler(irq, handle_simple_irq); + break; + } #ifdef BF537_GENERIC_ERROR_INT_DEMUX } else { @@ -513,7 +827,11 @@ int __init init_arch_irq(void) #endif #ifdef CONFIG_IRQCHIP_DEMUX_GPIO +#ifndef CONFIG_BF54x for (irq = IRQ_PF0; irq < NR_IRQS; irq++) { +#else + for (irq = IRQ_PA0; irq < NR_IRQS; irq++) { +#endif set_irq_chip(irq, &bfin_gpio_irqchip); /* if configured as edge, then will be changed to do_edge_IRQ */ set_irq_handler(irq, handle_level_irq); @@ -526,8 +844,7 @@ int __init init_arch_irq(void) bfin_write_ILAT(ilat); CSYNC(); - printk(KERN_INFO - "Configuring Blackfin Priority Driven Interrupts\n"); + printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n"); /* IMASK=xxx is equivalent to STI xx or irq_flags=xx, * local_irq_enable() */ @@ -538,14 +855,13 @@ int __init init_arch_irq(void) /* Enable interrupts IVG7-15 */ irq_flags = irq_flags | IMASK_IVG15 | IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | - IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | - IMASK_IVGHW; + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; return 0; } #ifdef CONFIG_DO_IRQ_L1 -void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text)); +void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text)); #endif void do_irq(int vec, struct pt_regs *fp) @@ -555,9 +871,25 @@ void do_irq(int vec, struct pt_regs *fp) } else { struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; - unsigned long sic_status; +#ifdef CONFIG_BF54x + unsigned long sic_status[3]; SSYNC(); + sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0); + sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1); + sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2); + + for (;; ivg++) { + if (ivg >= ivg_stop) { + atomic_inc(&num_spurious); + return; + } + if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) + break; + } +#else + unsigned long sic_status; + SSYNC(); sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); for (;; ivg++) { @@ -567,6 +899,7 @@ void do_irq(int vec, struct pt_regs *fp) } else if (sic_status & ivg->isrflag) break; } +#endif vec = ivg->irqno; } asm_do_IRQ(vec, fp); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 150ef5d088dc..1772d8d2c1a7 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -35,10 +35,10 @@ #include <linux/pm.h> #include <linux/sched.h> #include <linux/proc_fs.h> +#include <linux/io.h> +#include <linux/irq.h> -#include <asm/io.h> #include <asm/dpmc.h> -#include <asm/irq.h> #include <asm/gpio.h> #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 68107924639e..16c6169ed01b 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -87,7 +87,7 @@ void __init l1sram_init(void) L1_SCRATCH_LENGTH >> 10); memset(&l1_ssram, 0x00, sizeof(l1_ssram)); - l1_ssram[0].paddr = (void*)L1_SCRATCH_START; + l1_ssram[0].paddr = (void *)L1_SCRATCH_START; l1_ssram[0].size = L1_SCRATCH_LENGTH; l1_ssram[0].flag = SRAM_SLT_FREE; @@ -126,7 +126,7 @@ void __init l1_inst_sram_init(void) { #if L1_CODE_LENGTH != 0 memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram)); - l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1); + l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1); l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1); l1_inst_sram[0].flag = SRAM_SLT_FREE; diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 570356dbe028..68459cc052a1 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -29,8 +29,8 @@ #include <linux/swap.h> #include <linux/bootmem.h> +#include <linux/uaccess.h> #include <asm/bfin-global.h> -#include <asm/uaccess.h> #include <asm/l1layout.h> #include "blackfin_sram.h" @@ -168,42 +168,31 @@ void __init mem_init(void) } } -#ifdef CONFIG_BLK_DEV_INITRD -void __init free_initrd_mem(unsigned long start, unsigned long end) +static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end) { - int pages = 0; - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); + unsigned long addr; + /* next to check that the page we free is not a partial page */ + for (addr = begin; addr + PAGE_SIZE <= end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + free_page(addr); totalram_pages++; - pages++; } - printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); + printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); +} + +#ifdef CONFIG_BLK_DEV_INITRD +void __init free_initrd_mem(unsigned long start, unsigned long end) +{ + free_init_pages("initrd memory", start, end); } #endif void __init free_initmem(void) { #ifdef CONFIG_RAMKERNEL - unsigned long addr; - /* - * the following code should be cool even if these sections - * are not page aligned. - */ - addr = PAGE_ALIGN((unsigned long)(__init_begin)); - /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(__init_end); - addr += PAGE_SIZE) { - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - free_page(addr); - totalram_pages++; - } - printk(KERN_NOTICE - "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long)__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(__init_begin))), - (int)(addr - PAGE_SIZE)); + free_init_pages("unused kernel memory", + (unsigned long)(&__init_begin), + (unsigned long)(&__init_end)); #endif } diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c index 009a1700c854..cb8b8d5af34f 100644 --- a/arch/blackfin/oprofile/common.c +++ b/arch/blackfin/oprofile/common.c @@ -33,12 +33,12 @@ #include <linux/smp.h> #include <linux/errno.h> #include <linux/mutex.h> +#include <linux/ptrace.h> +#include <linux/irq.h> +#include <linux/io.h> -#include <asm/ptrace.h> #include <asm/system.h> #include <asm/blackfin.h> -#include <asm/irq.h> -#include <asm/io.h> #include "op_blackfin.h" diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c index b7a20a006b49..872dffe33623 100644 --- a/arch/blackfin/oprofile/op_model_bf533.c +++ b/arch/blackfin/oprofile/op_model_bf533.c @@ -32,12 +32,12 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/interrupt.h> -#include <asm/ptrace.h> +#include <linux/ptrace.h> +#include <linux/irq.h> +#include <linux/io.h> #include <asm/system.h> #include <asm/processor.h> #include <asm/blackfin.h> -#include <asm/irq.h> -#include <asm/io.h> #include "op_blackfin.h" diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c index 8fba16c846c9..6c6f8606af4c 100644 --- a/arch/blackfin/oprofile/timer_int.c +++ b/arch/blackfin/oprofile/timer_int.c @@ -31,8 +31,7 @@ #include <linux/smp.h> #include <linux/irq.h> #include <linux/oprofile.h> - -#include <asm/ptrace.h> +#include <linux/ptrace.h> static void enable_sys_timer0() { diff --git a/arch/cris/arch-v10/defconfig b/arch/cris/arch-v10/defconfig index 2a3411eaace9..710c20ba2be7 100644 --- a/arch/cris/arch-v10/defconfig +++ b/arch/cris/arch-v10/defconfig @@ -429,7 +429,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_BFS_FS is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set -# CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index 1a071f17446d..e8914d401696 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -267,10 +267,10 @@ static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op); const struct file_operations cryptocop_fops = { - owner: THIS_MODULE, - open: cryptocop_open, - release: cryptocop_release, - ioctl: cryptocop_ioctl + .owner = THIS_MODULE, + .open = cryptocop_open, + .release = cryptocop_release, + .ioctl = cryptocop_ioctl }; diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c index 5d6c52737df3..e12f6cc6f4a2 100644 --- a/arch/cris/arch-v32/drivers/i2c.c +++ b/arch/cris/arch-v32/drivers/i2c.c @@ -574,10 +574,10 @@ i2c_ioctl(struct inode *inode, struct file *file, } static const struct file_operations i2c_fops = { - owner: THIS_MODULE, - ioctl: i2c_ioctl, - open: i2c_open, - release: i2c_release, + .owner = THIS_MODULE, + .ioctl = i2c_ioctl, + .open = i2c_open, + .release = i2c_release, }; int __init diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index 24b919b3821a..fa8d50007e4c 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -51,10 +51,10 @@ int pcf8563_open(struct inode *, struct file *); int pcf8563_release(struct inode *, struct file *); static const struct file_operations pcf8563_fops = { - owner: THIS_MODULE, - ioctl: pcf8563_ioctl, - open: pcf8563_open, - release: pcf8563_release, + .owner = THIS_MODULE, + .ioctl = pcf8563_ioctl, + .open = pcf8563_open, + .release = pcf8563_release, }; unsigned char diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 43dc08ec7511..275673c192aa 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1492,6 +1492,10 @@ sys_call_table: .long sys_move_pages .long sys_getcpu .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd syscall_table_size = (. - sys_call_table) diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c index 1e7a101cbf4c..e89cad1192a9 100644 --- a/arch/frv/kernel/gdb-stub.c +++ b/arch/frv/kernel/gdb-stub.c @@ -647,17 +647,11 @@ void debug_to_serial(const char *p, int n) } #endif -#ifdef CONFIG_GDBSTUB_CONSOLE - -static kdev_t gdbstub_console_dev(struct console *con) -{ - return MKDEV(1,3); /* /dev/null */ -} +#ifdef CONFIG_GDB_CONSOLE static struct console gdbstub_console = { .name = "gdb", .write = gdbstub_console_write, /* in break.S */ - .device = gdbstub_console_dev, .flags = CON_PRINTBUFFER, .index = -1, }; @@ -2021,7 +2015,7 @@ void __init gdbstub_init(void) ptr = mem2hex(gdbstub_banner, ptr, sizeof(gdbstub_banner) - 1, 0); gdbstub_send_packet(output_buffer); #endif -#if defined(CONFIG_GDBSTUB_CONSOLE) && defined(CONFIG_GDBSTUB_IMMEDIATE) +#if defined(CONFIG_GDB_CONSOLE) && defined(CONFIG_GDBSTUB_IMMEDIATE) register_console(&gdbstub_console); #endif @@ -2031,7 +2025,7 @@ void __init gdbstub_init(void) /* * register the console at a more appropriate time */ -#if defined (CONFIG_GDBSTUB_CONSOLE) && !defined(CONFIG_GDBSTUB_IMMEDIATE) +#if defined (CONFIG_GDB_CONSOLE) && !defined(CONFIG_GDBSTUB_IMMEDIATE) static int __init gdbstub_postinit(void) { printk("registering console\n"); diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index aa3c795d5354..c1c32e4c863d 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -60,10 +60,6 @@ static void __init setup_linux_memory(void); static void __init setup_uclinux_memory(void); #endif -#ifdef CONFIG_CONSOLE -extern struct consw *conswitchp; -#endif - #ifdef CONFIG_MB93090_MB00 static char __initdata mb93090_banner[] = "FJ/RH FR-V Linux"; static char __initdata mb93090_version[] = UTS_RELEASE; @@ -795,13 +791,6 @@ void __init setup_arch(char **cmdline_p) #endif #endif -#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) - /* we need to initialize the Flashrom device here since we might - * do things with flash early on in the boot - */ - flash_probe(); -#endif - /* deal with the command line - RedBoot may have passed one to the kernel */ memcpy(command_line, boot_command_line, sizeof(command_line)); *cmdline_p = &command_line[0]; @@ -837,11 +826,6 @@ void __init setup_arch(char **cmdline_p) #endif #endif -#ifdef CONFIG_BLK_DEV_BLKMEM - ROOT_DEV = MKDEV(BLKMEM_MAJOR,0); -#endif - /*rom_length = (unsigned long)&_flashend - (unsigned long)&_romvec;*/ - #ifdef CONFIG_MMU setup_linux_memory(); #else diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 618dbad696f6..e35f74e6e505 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -68,6 +68,9 @@ config TIME_LOW_RES config NO_IOPORT def_bool y +config NO_DMA + def_bool y + config ISA bool default y diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile index b2d896a7e598..53b5c1edf596 100644 --- a/arch/h8300/Makefile +++ b/arch/h8300/Makefile @@ -61,10 +61,11 @@ archmrproper: archclean: $(Q)$(MAKE) $(clean)=$(boot) -vmlinux.srec vmlinux.bin: vmlinux +vmlinux.srec vmlinux.bin zImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ define archhelp - echo 'vmlinux.bin - Create raw binary' - echo 'vmlinux.srec - Create srec binary' + @echo 'vmlinux.bin - Create raw binary' + @echo 'vmlinux.srec - Create srec binary' + @echo 'zImage - Compressed kernel image' endef diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile index 71aac82a8ae0..d6189e057ed3 100644 --- a/arch/h8300/boot/compressed/Makefile +++ b/arch/h8300/boot/compressed/Makefile @@ -15,10 +15,10 @@ OBJECTS = $(obj)/head.o $(obj)/misc.o # in order to suppress error message. # CONFIG_MEMORY_START ?= 0x00400000 -CONFIG_BOOT_LINK_OFFSET ?= 0x00400000 +CONFIG_BOOT_LINK_OFFSET ?= 0x00140000 IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) -LDFLAGS_vmlinux := -T $(obj)/vmlinux.lds +LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE $(call if_changed,ld) diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S index b8e90d12d19e..985a81a2435a 100644 --- a/arch/h8300/boot/compressed/head.S +++ b/arch/h8300/boot/compressed/head.S @@ -4,7 +4,7 @@ * Copyright (C) 2006 Yoshinori Sato */ -.h8300h + .h8300h #include <linux/linkage.h> #define SRAM_START 0xff4000 diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds new file mode 100644 index 000000000000..65e2a0d1ae39 --- /dev/null +++ b/arch/h8300/boot/compressed/vmlinux.lds @@ -0,0 +1,32 @@ +SECTIONS +{ + .text : + { + __stext = . ; + __text = .; + *(.text.startup) + *(.text) + __etext = . ; + } + + .rodata : + { + *(.rodata) + } + .data : + + { + __sdata = . ; + ___data_start = . ; + *(.data.*) + } + .bss : + { + . = ALIGN(0x4) ; + __sbss = . ; + *(.bss*) + . = ALIGN(0x4) ; + __ebss = . ; + __end = . ; + } +} diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr new file mode 100644 index 000000000000..a0f6962736e9 --- /dev/null +++ b/arch/h8300/boot/compressed/vmlinux.scr @@ -0,0 +1,9 @@ +SECTIONS +{ + .data : { + _input_len = .; + LONG(_input_data_end - _input_data) _input_data = .; + *(.data) + _input_data_end = .; + } +} diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile index ccc1a7fbf94b..874f6aefee65 100644 --- a/arch/h8300/kernel/Makefile +++ b/arch/h8300/kernel/Makefile @@ -6,6 +6,7 @@ extra-y := vmlinux.lds obj-y := process.o traps.o ptrace.o irq.o \ sys_h8300.o time.o semaphore.o signal.o \ - setup.o gpio.o init_task.o syscalls.o + setup.o gpio.o init_task.o syscalls.o \ + entry.o obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o diff --git a/arch/h8300/platform/h8s/entry.S b/arch/h8300/kernel/entry.S index f3d6b8e8f959..ca7431690300 100644 --- a/arch/h8300/platform/h8s/entry.S +++ b/arch/h8300/kernel/entry.S @@ -1,11 +1,10 @@ /* -*- mode: asm -*- * - * linux/arch/h8300/platform/h8s/entry.S + * linux/arch/h8300/platform/h8300h/entry.S * * Yoshinori Sato <ysato@users.sourceforge.jp> + * David McCullough <davidm@snapgear.com> * - * fairly heavy changes to fix syscall args and signal processing - * by David McCullough <davidm@snapgear.com> */ /* @@ -23,13 +22,66 @@ #include <asm/thread_info.h> #include <asm/errno.h> +#if defined(CONFIG_CPU_H8300H) +#define USERRET 8 +INTERRUPTS = 64 + .h8300h + .macro SHLL2 reg + shll.l \reg + shll.l \reg + .endm + .macro SHLR2 reg + shlr.l \reg + shlr.l \reg + .endm + .macro SAVEREGS + mov.l er0,@-sp + mov.l er1,@-sp + mov.l er2,@-sp + mov.l er3,@-sp + .endm + .macro RESTOREREGS + mov.l @sp+,er3 + mov.l @sp+,er2 + .endm + .macro SAVEEXR + .endm + .macro RESTOREEXR + .endm +#endif +#if defined(CONFIG_CPU_H8S) +#define USERRET 10 +#define USEREXR 8 +INTERRUPTS = 128 .h8300s + .macro SHLL2 reg + shll.l #2,\reg + .endm + .macro SHLR2 reg + shlr.l #2,\reg + .endm + .macro SAVEREGS + stm.l er0-er3,@-sp + .endm + .macro RESTOREREGS + ldm.l @sp+,er2-er3 + .endm + .macro SAVEEXR + mov.w @(USEREXR:16,er0),r1 + mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */ + .endm + .macro RESTOREEXR + mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */ + mov.b r1l,r1h + mov.w r1,@(USEREXR:16,er0) + .endm +#endif + /* CPU context save/restore macros. */ - + .macro SAVE_ALL mov.l er0,@-sp - stc ccr,r0l /* check kernel mode */ btst #4,r0l bne 5f @@ -39,42 +91,38 @@ mov.l @sp,er0 /* restore saved er0 */ orc #0x10,ccr /* switch kernel stack */ mov.l @SYMBOL_NAME(sw_ksp),sp - sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ - stm.l er0-er3,@-sp - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(10:16,er0),er1 /* copy the RET addr */ - mov.l er1,@(LRET-LER3:16,sp) - mov.w @(8:16,er0),r1 - mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */ + sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ + SAVEREGS + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(USERRET:16,er0),er1 /* copy the RET addr */ + mov.l er1,@(LRET-LER3:16,sp) + SAVEEXR - mov.w e1,r1 /* e1 highbyte = ccr */ - and #0xef,r1h /* mask mode? flag */ - sub.w r0,r0 - mov.b r1h,r0l - mov.w r0,@(LCCR-LER3:16,sp) /* copy ccr */ mov.l @(LORIG-LER3:16,sp),er0 mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */ + mov.w e1,r1 /* e1 highbyte = ccr */ + and #0xef,r1h /* mask mode? flag */ bra 6f 5: /* kernel mode */ mov.l @sp,er0 /* restore saved er0 */ subs #2,sp /* set dummy ccr */ - stm.l er0-er3,@-sp + SAVEREGS mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */ +6: mov.b r1h,r1l mov.b #0,r1h - mov.w r1,@(LCCR-LER3:16,sp) -6: + mov.w r1,@(LCCR-LER3:16,sp) /* set ccr */ mov.l er6,@-sp /* syscall arg #6 */ mov.l er5,@-sp /* syscall arg #5 */ mov.l er4,@-sp /* syscall arg #4 */ - .endm + .endm /* r1 = ccr */ .macro RESTORE_ALL mov.l @sp+,er4 mov.l @sp+,er5 mov.l @sp+,er6 - ldm.l @sp+,er2-er3 + RESTOREREGS mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */ btst #4,r0l bne 7f @@ -83,18 +131,16 @@ mov.l @SYMBOL_NAME(sw_usp),er0 mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */ mov.l er1,@er0 - mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */ - mov.b r1l,r1h - mov.w r1,@(8:16,er0) + RESTOREEXR mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */ mov.b r1l,r1h mov.b @(LRET+1-LER1:16,sp),r1l mov.w r1,e1 mov.w @(LRET+2-LER1:16,sp),r1 - mov.l er1,@(10:16,er0) + mov.l er1,@(USERRET:16,er0) mov.l @sp+,er1 - add.l #(LRET-LER1),sp /* remove LORIG - LRET */ + add.l #(LRET-LER1),sp /* remove LORIG - LRET */ mov.l sp,@SYMBOL_NAME(sw_ksp) andc #0xef,ccr /* switch to user mode */ mov.l er0,sp @@ -108,7 +154,7 @@ adds #4,sp /* remove the sw created LVEC */ rte .endm - + .globl SYMBOL_NAME(system_call) .globl SYMBOL_NAME(ret_from_exception) .globl SYMBOL_NAME(ret_from_fork) @@ -116,16 +162,25 @@ .globl SYMBOL_NAME(interrupt_redirect_table) .globl SYMBOL_NAME(sw_ksp),SYMBOL_NAME(sw_usp) .globl SYMBOL_NAME(resume) -.globl SYMBOL_NAME(trace_break) .globl SYMBOL_NAME(interrupt_entry) - -INTERRUPTS = 128 +.globl SYMBOL_NAME(trace_break) + #if defined(CONFIG_ROMKERNEL) .section .int_redirect,"ax" SYMBOL_NAME_LABEL(interrupt_redirect_table) +#if defined(CONFIG_CPU_H8300H) .rept 7 .long 0 .endr +#endif +#if defined(CONFIG_CPU_H8S) + .rept 5 + .long 0 + .endr + jmp @SYMBOL_NAME(trace_break) + .long 0 +#endif + jsr @SYMBOL_NAME(interrupt_entry) /* NMI */ jmp @SYMBOL_NAME(system_call) /* TRAPA #0 (System call) */ .long 0 @@ -141,20 +196,20 @@ SYMBOL_NAME_LABEL(interrupt_redirect_table) SYMBOL_NAME_LABEL(interrupt_redirect_table) .space 4 #endif - + .section .text .align 2 SYMBOL_NAME_LABEL(interrupt_entry) SAVE_ALL - mov.w @(LCCR,sp),r0 - btst #4,r0l + mov.l sp,er0 + add.l #LVEC,er0 + btst #4,r1l bne 1f + /* user LVEC */ mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(4:16,er0),er0 - bra 2f + adds #4,er0 1: - mov.l @(LVEC:16,sp),er0 -2: + mov.l @er0,er0 /* LVEC address */ #if defined(CONFIG_ROMKERNEL) sub.l #SYMBOL_NAME(interrupt_redirect_table),er0 #endif @@ -162,69 +217,62 @@ SYMBOL_NAME_LABEL(interrupt_entry) mov.l @SYMBOL_NAME(interrupt_redirect_table),er1 sub.l er1,er0 #endif - shlr.l #2,er0 + SHLR2 er0 dec.l #1,er0 mov.l sp,er1 subs #4,er1 /* adjust ret_pc */ - jsr @SYMBOL_NAME(process_int) - mov.l @SYMBOL_NAME(irq_stat)+CPUSTAT_SOFTIRQ_PENDING,er0 - beq 1f - jsr @SYMBOL_NAME(do_softirq) -1: - jmp @SYMBOL_NAME(ret_from_exception) + jsr @SYMBOL_NAME(do_IRQ) + jmp @SYMBOL_NAME(ret_from_interrupt) SYMBOL_NAME_LABEL(system_call) subs #4,sp /* dummy LVEC */ SAVE_ALL + andc #0x7f,ccr mov.l er0,er4 - mov.l #-ENOSYS,er0 - mov.l er0,@(LER0:16,sp) /* save top of frame */ mov.l sp,er0 jsr @SYMBOL_NAME(set_esp0) - cmp.l #NR_syscalls,er4 - bcc SYMBOL_NAME(ret_from_exception):16 - shll.l #2,er4 - mov.l #SYMBOL_NAME(sys_call_table),er0 - add.l er4,er0 - mov.l @er0,er0 - mov.l er0,er4 - beq SYMBOL_NAME(ret_from_exception):16 mov.l sp,er2 and.w #0xe000,r2 - mov.b @((TASK_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l + mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l btst #(TIF_SYSCALL_TRACE & 7),r2l + beq 1f + jsr @SYMBOL_NAME(do_syscall_trace) +1: + cmp.l #NR_syscalls,er4 + bcc badsys + SHLL2 er4 + mov.l #SYMBOL_NAME(sys_call_table),er0 + add.l er4,er0 + mov.l @er0,er4 + beq SYMBOL_NAME(ret_from_exception):16 mov.l @(LER1:16,sp),er0 mov.l @(LER2:16,sp),er1 mov.l @(LER3:16,sp),er2 - andc #0x7f,ccr jsr @er4 - mov.l er0,@(LER0:16,sp) /* save the return value */ + mov.l er0,@(LER0:16,sp) /* save the return value */ + mov.l sp,er2 + and.w #0xe000,r2 + mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l + btst #(TIF_SYSCALL_TRACE & 7),r2l + beq 2f + jsr @SYMBOL_NAME(do_syscall_trace) +2: #if defined(CONFIG_SYSCALL_PRINT) jsr @SYMBOL_NAME(syscall_print) #endif - bra SYMBOL_NAME(ret_from_exception):8 -1: - jsr SYMBOL_NAME(syscall_trace) - mov.l @(LER1:16,sp),er0 - mov.l @(LER2:16,sp),er1 - mov.l @(LER3:16,sp),er2 - jsr @er4 - mov.l er0,@(LER0:16,sp) /* save the return value */ - jsr @SYMBOL_NAME(syscall_trace) - bra SYMBOL_NAME(ret_from_exception):8 + orc #0x80,ccr + bra resume_userspace -SYMBOL_NAME_LABEL(ret_from_fork) - mov.l er2,er0 - jsr @SYMBOL_NAME(schedule_tail) - bra SYMBOL_NAME(ret_from_exception):8 +badsys: + mov.l #-ENOSYS,er0 + mov.l er0,@(LER0:16,sp) + bra resume_userspace -SYMBOL_NAME_LABEL(reschedule) - /* save top of frame */ - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - jsr @SYMBOL_NAME(schedule) +#if !defined(CONFIG_PREEMPT) +#define resume_kernel restore_all +#endif SYMBOL_NAME_LABEL(ret_from_exception) #if defined(CONFIG_PREEMPT) @@ -232,58 +280,68 @@ SYMBOL_NAME_LABEL(ret_from_exception) #endif SYMBOL_NAME_LABEL(ret_from_interrupt) mov.b @(LCCR+1:16,sp),r0l - btst #4,r0l /* check if returning to kernel */ - bne done:8 /* if so, skip resched, signals */ + btst #4,r0l + bne resume_kernel:8 /* return from kernel */ +resume_userspace: andc #0x7f,ccr mov.l sp,er4 - and.w #0xe000,r4 + and.w #0xe000,r4 /* er4 <- current thread info */ mov.l @(TI_FLAGS:16,er4),er1 and.l #_TIF_WORK_MASK,er1 - beq done:8 -1: - mov.l @(TI_FLAGS:16,er4),er1 + beq restore_all:8 +work_pending: btst #TIF_NEED_RESCHED,r1l - bne SYMBOL_NAME(reschedule):16 + bne work_resched:8 + /* work notifysig */ mov.l sp,er0 - subs #4,er0 /* adjust retpc */ - mov.l er2,er1 - jsr @SYMBOL_NAME(do_signal) + subs #4,er0 /* er0: pt_regs */ + jsr @SYMBOL_NAME(do_notify_resume) + bra restore_all:8 +work_resched: + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + jsr @SYMBOL_NAME(schedule) + bra resume_userspace:8 +restore_all: + RESTORE_ALL /* Does RTE */ + #if defined(CONFIG_PREEMPT) - bra done:8 /* userspace thoru */ -3: - btst #4,r0l - beq done:8 /* userspace thoru */ -4: - mov.l @(TI_PRE_COUNT:16,er4),er1 - bne done:8 - mov.l @(TI_FLAGS:16,er4),er1 - btst #TIF_NEED_RESCHED,r1l - beq done:8 - mov.b r0l,r0l - bpl done:8 /* interrupt off (exception path?) */ - mov.l #PREEMPT_ACTIVE,er1 - mov.l er1,@(TI_PRE_COUNT:16,er4) +resume_kernel: + mov.l @(TI_PRE_COUNT:16,er4),er0 + bne restore_all:8 +need_resched: + mov.l @(TI_FLAGS:16,er4),er0 + btst #TIF_NEED_RESCHED,r0l + beq restore_all:8 + mov.b @(LCCR+1:16,sp),r0l /* Interrupt Enabled? */ + bmi restore_all:8 + mov.l #PREEMPT_ACTIVE,er0 + mov.l er0,@(TI_PRE_COUNT:16,er4) andc #0x7f,ccr + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) jsr @SYMBOL_NAME(schedule) - sub.l er1,er1 - mov.l er1,@(TI_PRE_COUNT:16,er4) orc #0x80,ccr - bra 4b:8 + bra need_resched:8 #endif -done: - RESTORE_ALL /* Does RTE */ + +SYMBOL_NAME_LABEL(ret_from_fork) + mov.l er2,er0 + jsr @SYMBOL_NAME(schedule_tail) + jmp @SYMBOL_NAME(ret_from_exception) SYMBOL_NAME_LABEL(resume) /* - * er0 = prev - * er1 = next - * return last in er2 + * Beware - when entering resume, offset of tss is in d1, + * prev (the current task) is in a0, next (the new task) + * is in a1 and d2.b is non-zero if the mm structure is + * shared between the tasks, so don't change these + * registers until their contents are no longer needed. */ /* save sr */ sub.w r3,r3 stc ccr,r3l - stc exr,r3h mov.w r3,@(THREAD_CCR+2:16,er0) /* disable interrupts */ @@ -291,41 +349,45 @@ SYMBOL_NAME_LABEL(resume) mov.l @SYMBOL_NAME(sw_usp),er3 mov.l er3,@(THREAD_USP:16,er0) mov.l sp,@(THREAD_KSP:16,er0) - + /* Skip address space switching if they are the same. */ /* FIXME: what did we hack out of here, this does nothing! */ mov.l @(THREAD_USP:16,er1),er0 mov.l er0,@SYMBOL_NAME(sw_usp) mov.l @(THREAD_KSP:16,er1),sp - + /* restore status register */ mov.w @(THREAD_CCR+2:16,er1),r3 ldc r3l,ccr - ldc r3h,exr - rts SYMBOL_NAME_LABEL(trace_break) - subs #4,sp /* dummy LVEC */ + subs #4,sp SAVE_ALL sub.l er1,er1 dec.l #1,er1 - mov.l er1,@(LORIG,sp) + mov.l er1,@(LORIG,sp) mov.l sp,er0 jsr @SYMBOL_NAME(set_esp0) mov.l @SYMBOL_NAME(sw_usp),er0 mov.l @er0,er1 + mov.w @(-2:16,er1),r2 + cmp.w #0x5730,r2 + beq 1f subs #2,er1 - mov.l er1,@er0 + mov.l er1,@er0 +1: and.w #0xff,e1 mov.l er1,er0 jsr @SYMBOL_NAME(trace_trap) - jmp @SYMBOL_NAME(ret_from_exception) + jmp @SYMBOL_NAME(ret_from_exception) .section .bss SYMBOL_NAME_LABEL(sw_ksp) - .space 4 + .space 4 SYMBOL_NAME_LABEL(sw_usp) - .space 4 + .space 4 + + .end diff --git a/arch/h8300/kernel/ints.c b/arch/h8300/kernel/ints.c deleted file mode 100644 index 3e4f479271c9..000000000000 --- a/arch/h8300/kernel/ints.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * linux/arch/h8300/kernel/ints.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Based on linux/arch/$(ARCH)/platform/$(PLATFORM)/ints.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com> - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/seq_file.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/random.h> -#include <linux/bootmem.h> -#include <linux/hardirq.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/setup.h> -#include <asm/errno.h> - -/* - * This structure has only 4 elements for speed reasons - */ -typedef struct irq_handler { - irqreturn_t (*handler)(int, void *, struct pt_regs *); - int flags; - int count; - void *dev_id; - const char *devname; -} irq_handler_t; - -static irq_handler_t *irq_list[NR_IRQS]; -static int use_kmalloc; - -extern unsigned long *interrupt_redirect_table; -extern const int h8300_saved_vectors[]; -extern const unsigned long h8300_trap_table[]; -int h8300_enable_irq_pin(unsigned int irq); -void h8300_disable_irq_pin(unsigned int irq); - -#define CPU_VECTOR ((unsigned long *)0x000000) -#define ADDR_MASK (0xffffff) - -#if defined(CONFIG_RAMKERNEL) -static unsigned long __init *get_vector_address(void) -{ - unsigned long *rom_vector = CPU_VECTOR; - unsigned long base,tmp; - int vec_no; - - base = rom_vector[EXT_IRQ0] & ADDR_MASK; - - /* check romvector format */ - for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) { - if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK)) - return NULL; - } - - /* ramvector base address */ - base -= EXT_IRQ0*4; - - /* writerble check */ - tmp = ~(*(volatile unsigned long *)base); - (*(volatile unsigned long *)base) = tmp; - if ((*(volatile unsigned long *)base) != tmp) - return NULL; - return (unsigned long *)base; -} -#endif - -void __init init_IRQ(void) -{ -#if defined(CONFIG_RAMKERNEL) - int i; - unsigned long *ramvec,*ramvec_p; - const unsigned long *trap_entry; - const int *saved_vector; - - ramvec = get_vector_address(); - if (ramvec == NULL) - panic("interrupt vector serup failed."); - else - printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec); - - /* create redirect table */ - ramvec_p = ramvec; - trap_entry = h8300_trap_table; - saved_vector = h8300_saved_vectors; - for ( i = 0; i < NR_IRQS; i++) { - if (i == *saved_vector) { - ramvec_p++; - saved_vector++; - } else { - if ( i < NR_TRAPS ) { - if (*trap_entry) - *ramvec_p = VECTOR(*trap_entry); - ramvec_p++; - trap_entry++; - } else - *ramvec_p++ = REDIRECT(interrupt_entry); - } - } - interrupt_redirect_table = ramvec; -#ifdef DUMP_VECTOR - ramvec_p = ramvec; - for (i = 0; i < NR_IRQS; i++) { - if ((i % 8) == 0) - printk(KERN_DEBUG "\n%p: ",ramvec_p); - printk(KERN_DEBUG "%p ",*ramvec_p); - ramvec_p++; - } - printk(KERN_DEBUG "\n"); -#endif -#endif -} - -int request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long flags, const char *devname, void *dev_id) -{ - irq_handler_t *irq_handle; - if (irq < 0 || irq >= NR_IRQS) { - printk(KERN_ERR "Incorrect IRQ %d from %s\n", irq, devname); - return -EINVAL; - } - - if (irq_list[irq] || (h8300_enable_irq_pin(irq) == -EBUSY)) - return -EBUSY; - - if (use_kmalloc) - irq_handle = kmalloc(sizeof(irq_handler_t), GFP_ATOMIC); - else { - /* use bootmem allocater */ - irq_handle = (irq_handler_t *)alloc_bootmem(sizeof(irq_handler_t)); - irq_handle = (irq_handler_t *)((unsigned long)irq_handle | 0x80000000); - } - - if (irq_handle == NULL) - return -ENOMEM; - - irq_handle->handler = handler; - irq_handle->flags = flags; - irq_handle->count = 0; - irq_handle->dev_id = dev_id; - irq_handle->devname = devname; - irq_list[irq] = irq_handle; - - if (irq_handle->flags & IRQF_SAMPLE_RANDOM) - rand_initialize_irq(irq); - - enable_irq(irq); - return 0; -} - -EXPORT_SYMBOL(request_irq); - -void free_irq(unsigned int irq, void *dev_id) -{ - if (irq >= NR_IRQS) - return; - - if (!irq_list[irq] || irq_list[irq]->dev_id != dev_id) - printk(KERN_WARNING "Removing probably wrong IRQ %d from %s\n", - irq, irq_list[irq]->devname); - disable_irq(irq); - h8300_disable_irq_pin(irq); - if (((unsigned long)irq_list[irq] & 0x80000000) == 0) { - kfree(irq_list[irq]); - irq_list[irq] = NULL; - } -} - -EXPORT_SYMBOL(free_irq); - -/* - * Do we need these probe functions on the m68k? - */ -unsigned long probe_irq_on (void) -{ - return 0; -} - -EXPORT_SYMBOL(probe_irq_on); - -int probe_irq_off (unsigned long irqs) -{ - return 0; -} - -EXPORT_SYMBOL(probe_irq_off); - -void enable_irq(unsigned int irq) -{ - if (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS)) - IER_REGS |= 1 << (irq - EXT_IRQ0); -} - -void disable_irq(unsigned int irq) -{ - if (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS)) - IER_REGS &= ~(1 << (irq - EXT_IRQ0)); -} - -asmlinkage void process_int(int irq, struct pt_regs *fp) -{ - irq_enter(); - h8300_clear_isr(irq); - if (irq >= NR_TRAPS && irq < NR_IRQS) { - if (irq_list[irq]) { - irq_list[irq]->handler(irq, irq_list[irq]->dev_id, fp); - irq_list[irq]->count++; - if (irq_list[irq]->flags & IRQF_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - } - } else { - BUG(); - } - irq_exit(); -} - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v; - - if ((i < NR_IRQS) && (irq_list[i]!=NULL)) { - seq_printf(p, "%3d: %10u ",i,irq_list[i]->count); - seq_printf(p, "%s\n", irq_list[i]->devname); - } - - return 0; -} - -void init_irq_proc(void) -{ -} - -static int __init enable_kmalloc(void) -{ - use_kmalloc = 1; - return 0; -} -core_initcall(enable_kmalloc); diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c index 8f2411db7eaf..8a7a991b8f76 100644 --- a/arch/h8300/kernel/ptrace.c +++ b/arch/h8300/kernel/ptrace.c @@ -219,7 +219,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void syscall_trace(void) +asmlinkage void do_syscall_trace(void) { if (!test_thread_flag(TIF_SYSCALL_TRACE)) return; diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index 02955604d760..62ea12d339b9 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -547,3 +547,9 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset) } return 0; } + +asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) +{ + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs, NULL); +} diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile index b24ea08aa0a7..c5096369ea50 100644 --- a/arch/h8300/platform/h8300h/Makefile +++ b/arch/h8300/platform/h8300h/Makefile @@ -4,4 +4,4 @@ # Reuse any files we can from the H8/300H # -obj-y := entry.o irq_pin.o ptrace_h8300h.o +obj-y := irq_pin.o ptrace_h8300h.o diff --git a/arch/h8300/platform/h8300h/entry.S b/arch/h8300/platform/h8300h/entry.S deleted file mode 100644 index f86ac3b5d4de..000000000000 --- a/arch/h8300/platform/h8300h/entry.S +++ /dev/null @@ -1,332 +0,0 @@ -/* -*- mode: asm -*- - * - * linux/arch/h8300/platform/h8300h/entry.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * David McCullough <davidm@snapgear.com> - * - */ - -/* - * entry.S - * include exception/interrupt gateway - * system call entry - */ - -#include <linux/sys.h> -#include <asm/unistd.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/errno.h> - - .h8300h - -/* CPU context save/restore macros. */ - - .macro SAVE_ALL - mov.l er0,@-sp - - stc ccr,r0l /* check kernel mode */ - btst #4,r0l - bne 5f - - mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */ - mov.l @sp,er0 - orc #0x10,ccr - mov.l @SYMBOL_NAME(sw_ksp),sp - sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ - mov.l er0,@-sp - mov.l er1,@-sp - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(8:16,er0),er1 /* copy the RET addr */ - mov.l er1,@(LRET-LER1:16,sp) - - mov.w e1,r1 /* e1 highbyte = ccr */ - and #0xef,r1h /* mask mode? flag */ - sub.w r0,r0 - mov.b r1h,r0l - mov.w r0,@(LCCR-LER1:16,sp) /* copy ccr */ - mov.l @(LORIG-LER1:16,sp),er0 - mov.l er0,@(LER0-LER1:16,sp) /* copy ER0 */ - bra 6f -5: - mov.l @sp,er0 /* kernel mode */ - subs #2,sp /* dummy ccr */ - mov.l er0,@-sp - mov.l er1,@-sp - mov.w @(LRET-LER1:16,sp),r1 /* copy old ccr */ - mov.b r1h,r1l - mov.b #0,r1h - mov.w r1,@(LCCR-LER1:16,sp) /* set ccr */ -6: - mov.l er2,@-sp - mov.l er3,@-sp - mov.l er6,@-sp /* syscall arg #6 */ - mov.l er5,@-sp /* syscall arg #5 */ - mov.l er4,@-sp /* syscall arg #4 */ - .endm - - .macro RESTORE_ALL - mov.l @sp+,er4 - mov.l @sp+,er5 - mov.l @sp+,er6 - mov.l @sp+,er3 - mov.l @sp+,er2 - mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */ - btst #4,r0l - bne 7f - - orc #0x80,ccr - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */ - mov.l er1,@er0 - mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */ - mov.b r1l,r1h - mov.b @(LRET+1-LER1:16,sp),r1l - mov.w r1,e1 - mov.w @(LRET+2-LER1:16,sp),r1 - mov.l er1,@(8:16,er0) - - mov.l @sp+,er1 - add.l #(LRET-LER1),sp /* remove LORIG - LRET */ - mov.l sp,@SYMBOL_NAME(sw_ksp) - mov.l er0,sp - bra 8f -7: - mov.l @sp+,er1 - adds #4,sp - adds #2,sp -8: - mov.l @sp+,er0 - adds #4,sp /* remove the sw created LVEC */ - rte - .endm - -.globl SYMBOL_NAME(system_call) -.globl SYMBOL_NAME(ret_from_exception) -.globl SYMBOL_NAME(ret_from_fork) -.globl SYMBOL_NAME(ret_from_interrupt) -.globl SYMBOL_NAME(interrupt_redirect_table) -.globl SYMBOL_NAME(sw_ksp),SYMBOL_NAME(sw_usp) -.globl SYMBOL_NAME(resume) -.globl SYMBOL_NAME(interrupt_redirect_table) -.globl SYMBOL_NAME(interrupt_entry) -.globl SYMBOL_NAME(system_call) -.globl SYMBOL_NAME(trace_break) - -#if defined(CONFIG_ROMKERNEL) -INTERRUPTS = 64 - .section .int_redirect,"ax" -SYMBOL_NAME_LABEL(interrupt_redirect_table) - .rept 7 - .long 0 - .endr - jsr @SYMBOL_NAME(interrupt_entry) /* NMI */ - jmp @SYMBOL_NAME(system_call) /* TRAPA #0 (System call) */ - .long 0 - .long 0 - jmp @SYMBOL_NAME(trace_break) /* TRAPA #3 (breakpoint) */ - .rept INTERRUPTS-12 - jsr @SYMBOL_NAME(interrupt_entry) - .endr -#endif -#if defined(CONFIG_RAMKERNEL) -.globl SYMBOL_NAME(interrupt_redirect_table) - .section .bss -SYMBOL_NAME_LABEL(interrupt_redirect_table) - .space 4 -#endif - - .section .text - .align 2 -SYMBOL_NAME_LABEL(interrupt_entry) - SAVE_ALL - mov.w @(LCCR,sp),r0 - btst #4,r0l - bne 1f - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(4:16,er0),er0 - bra 2f -1: - mov.l @(LVEC,sp),er0 -2: -#if defined(CONFIG_ROMKERNEL) - sub.l #SYMBOL_NAME(interrupt_redirect_table),er0 -#endif -#if defined(CONFIG_RAMKERNEL) - mov.l @SYMBOL_NAME(interrupt_redirect_table),er1 - sub.l er1,er0 -#endif - shlr.l er0 - shlr.l er0 - dec.l #1,er0 - mov.l sp,er1 - subs #4,er1 /* adjust ret_pc */ - jsr @SYMBOL_NAME(do_IRQ) - mov.l @SYMBOL_NAME(irq_stat)+CPUSTAT_SOFTIRQ_PENDING,er0 - beq 1f - jsr @SYMBOL_NAME(do_softirq) -1: - jmp @SYMBOL_NAME(ret_from_interrupt) - -SYMBOL_NAME_LABEL(system_call) - subs #4,sp /* dummy LVEC */ - SAVE_ALL - mov.w @(LCCR:16,sp),r1 - bset #4,r1l - ldc r1l,ccr - mov.l er0,er4 - mov.l #-ENOSYS,er0 - mov.l er0,@(LER0:16,sp) - - /* save top of frame */ - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - cmp.l #NR_syscalls,er4 - bcc SYMBOL_NAME(ret_from_exception):16 - shll.l er4 - shll.l er4 - mov.l #SYMBOL_NAME(sys_call_table),er0 - add.l er4,er0 - mov.l @er0,er4 - beq SYMBOL_NAME(ret_from_exception):16 - mov.l sp,er2 - and.w #0xe000,r2 - mov.b @((TASK_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l - btst #(TIF_SYSCALL_TRACE & 7),r2l - bne 1f - mov.l @(LER1:16,sp),er0 - mov.l @(LER2:16,sp),er1 - mov.l @(LER3:16,sp),er2 - jsr @er4 - mov.l er0,@(LER0:16,sp) /* save the return value */ -#if defined(CONFIG_SYSCALL_PRINT) - jsr @SYMBOL_NAME(syscall_print) -#endif - bra SYMBOL_NAME(ret_from_exception):8 -1: - jsr SYMBOL_NAME(syscall_trace) - mov.l @(LER1:16,sp),er0 - mov.l @(LER2:16,sp),er1 - mov.l @(LER3:16,sp),er2 - jsr @er4 - mov.l er0,@(LER0:16,sp) /* save the return value */ - jsr @SYMBOL_NAME(syscall_trace) - bra SYMBOL_NAME(ret_from_exception):8 - -SYMBOL_NAME_LABEL(ret_from_fork) - mov.l er2,er0 - jsr @SYMBOL_NAME(schedule_tail) - bra SYMBOL_NAME(ret_from_exception):8 - -SYMBOL_NAME_LABEL(reschedule) - /* save top of frame */ - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - jsr @SYMBOL_NAME(schedule) - -SYMBOL_NAME_LABEL(ret_from_exception) -#if defined(CONFIG_PREEMPT) - orc #0x80,ccr -#endif -SYMBOL_NAME_LABEL(ret_from_interrupt) - mov.b @(LCCR+1:16,sp),r0l - btst #4,r0l /* check if returning to kernel */ - bne done:8 /* if so, skip resched, signals */ - andc #0x7f,ccr - mov.l sp,er4 - and.w #0xe000,r4 - mov.l @(TI_FLAGS:16,er4),er1 - and.l #_TIF_WORK_MASK,er1 - beq done:8 -1: - mov.l @(TI_FLAGS:16,er4),er1 - btst #TIF_NEED_RESCHED,r1l - bne SYMBOL_NAME(reschedule):16 - mov.l sp,er0 - subs #4,er0 /* adjust retpc */ - mov.l er2,er1 - jsr @SYMBOL_NAME(do_signal) -#if defined(CONFIG_PREEMPT) - bra done:8 /* userspace thoru */ -3: - btst #4,r0l - beq done:8 /* userspace thoru */ -4: - mov.l @(TI_PRE_COUNT:16,er4),er1 - bne done:8 - mov.l @(TI_FLAGS:16,er4),er1 - btst #TIF_NEED_RESCHED,r1l - beq done:8 - mov.b r0l,r0l - bpl done:8 /* interrupt off (exception path?) */ - mov.l #PREEMPT_ACTIVE,er1 - mov.l er1,@(TI_PRE_COUNT:16,er4) - andc #0x7f,ccr - jsr @SYMBOL_NAME(schedule) - sub.l er1,er1 - mov.l er1,@(TI_PRE_COUNT:16,er4) - orc #0x80,ccr - bra 4b:8 -#endif -done: - RESTORE_ALL /* Does RTE */ - -SYMBOL_NAME_LABEL(resume) - /* - * Beware - when entering resume, offset of tss is in d1, - * prev (the current task) is in a0, next (the new task) - * is in a1 and d2.b is non-zero if the mm structure is - * shared between the tasks, so don't change these - * registers until their contents are no longer needed. - */ - - /* save sr */ - sub.w r3,r3 - stc ccr,r3l - mov.w r3,@(THREAD_CCR+2:16,er0) - - /* disable interrupts */ - orc #0x80,ccr - mov.l @SYMBOL_NAME(sw_usp),er3 - mov.l er3,@(THREAD_USP:16,er0) - mov.l sp,@(THREAD_KSP:16,er0) - - /* Skip address space switching if they are the same. */ - /* FIXME: what did we hack out of here, this does nothing! */ - - mov.l @(THREAD_USP:16,er1),er0 - mov.l er0,@SYMBOL_NAME(sw_usp) - mov.l @(THREAD_KSP:16,er1),sp - - /* restore status register */ - mov.w @(THREAD_CCR+2:16,er1),r3 - - ldc r3l,ccr - rts - -SYMBOL_NAME_LABEL(trace_break) - subs #4,sp - SAVE_ALL - sub.l er1,er1 - dec.l #1,er1 - mov.l er1,@(LORIG,sp) - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @er0,er1 - subs #2,er1 - mov.l er1,@er0 - and.w #0xff,e1 - mov.l er1,er0 - jsr @SYMBOL_NAME(trace_trap) - jmp @SYMBOL_NAME(ret_from_exception) - - .section .bss -SYMBOL_NAME_LABEL(sw_ksp) - .space 4 -SYMBOL_NAME_LABEL(sw_usp) - .space 4 diff --git a/arch/h8300/platform/h8s/Makefile b/arch/h8300/platform/h8s/Makefile index 0847b15d4256..bf1241883766 100644 --- a/arch/h8300/platform/h8s/Makefile +++ b/arch/h8300/platform/h8s/Makefile @@ -4,4 +4,4 @@ # Reuse any files we can from the H8S # -obj-y := entry.o ints_h8s.o ptrace_h8s.o +obj-y := ints_h8s.o ptrace_h8s.o diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index b1b2b30b1b8e..8531a540ca8c 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1212,8 +1212,12 @@ source "drivers/Kconfig" source "fs/Kconfig" -menu "Instrumentation Support" +menuconfig INSTRUMENTATION + bool "Instrumentation Support" depends on EXPERIMENTAL + default y + +if INSTRUMENTATION source "arch/i386/oprofile/Kconfig" @@ -1226,7 +1230,8 @@ config KPROBES a probepoint and specifies the callback. Kprobes is useful for kernel debugging, non-intrusive instrumentation and testing. If in doubt, say "N". -endmenu + +endif # INSTRUMENTATION source "arch/i386/Kconfig.debug" diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index 5c95ceb7f122..9cbe76c3aa35 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -344,8 +344,8 @@ config X86_CMOV depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7) default y -config X86_MINIMUM_CPU_MODEL +config X86_MINIMUM_CPU_FAMILY int - default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP - default "0" + default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK + default "3" diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile index bfbc32098a4a..08678a0a3d19 100644 --- a/arch/i386/boot/Makefile +++ b/arch/i386/boot/Makefile @@ -25,27 +25,56 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA #RAMDISK := -DRAMDISK=512 -targets := vmlinux.bin bootsect bootsect.o \ - setup setup.o zImage bzImage +targets := vmlinux.bin setup.bin setup.elf zImage bzImage subdir- := compressed +setup-y += a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o +setup-y += header.o main.o mca.o memory.o pm.o pmjump.o +setup-y += printf.o string.o tty.o video.o version.o voyager.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +setup-y += video-vga.o +setup-y += video-vesa.o +setup-y += video-bios.o + hostprogs-y := tools/build HOSTCFLAGS_build.o := $(LINUXINCLUDE) # --------------------------------------------------------------------------- +# How to compile the 16-bit code. Note we always compile for -march=i386, +# that way we can complain to the user if the CPU is insufficient. +cflags-i386 := +cflags-x86_64 := -m32 +CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ + $(cflags-$(ARCH)) \ + -Wall -Wstrict-prototypes \ + -march=i386 -mregparm=3 \ + -include $(srctree)/$(src)/code16gcc.h \ + -fno-strict-aliasing -fomit-frame-pointer \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-toplevel-reorder,\ + $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-stack-protector) \ + $(call cc-option, -mpreferred-stack-boundary=2) +AFLAGS := $(CFLAGS) -D__ASSEMBLY__ + $(obj)/zImage: IMAGE_OFFSET := 0x1000 $(obj)/zImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) $(obj)/bzImage: IMAGE_OFFSET := 0x100000 +$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__ $(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ $(obj)/bzImage: BUILDFLAGS := -b quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \ +cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \ $(obj)/vmlinux.bin $(ROOT_DEV) > $@ -$(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ +$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \ $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -53,12 +82,17 @@ $(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) -LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary -LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext +SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) -$(obj)/setup $(obj)/bootsect: %: %.o FORCE +LDFLAGS_setup.elf := -T +$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE $(call if_changed,ld) +OBJCOPYFLAGS_setup.bin := -O binary + +$(obj)/setup.bin: $(obj)/setup.elf FORCE + $(call if_changed,objcopy) + $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ diff --git a/arch/i386/boot/a20.c b/arch/i386/boot/a20.c new file mode 100644 index 000000000000..31348d054fca --- /dev/null +++ b/arch/i386/boot/a20.c @@ -0,0 +1,161 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/a20.c + * + * Enable A20 gate (return -1 on failure) + */ + +#include "boot.h" + +#define MAX_8042_LOOPS 100000 + +static int empty_8042(void) +{ + u8 status; + int loops = MAX_8042_LOOPS; + + while (loops--) { + io_delay(); + + status = inb(0x64); + if (status & 1) { + /* Read and discard input data */ + io_delay(); + (void)inb(0x60); + } else if (!(status & 2)) { + /* Buffers empty, finished! */ + return 0; + } + } + + return -1; +} + +/* Returns nonzero if the A20 line is enabled. The memory address + used as a test is the int $0x80 vector, which should be safe. */ + +#define A20_TEST_ADDR (4*0x80) +#define A20_TEST_SHORT 32 +#define A20_TEST_LONG 2097152 /* 2^21 */ + +static int a20_test(int loops) +{ + int ok = 0; + int saved, ctr; + + set_fs(0x0000); + set_gs(0xffff); + + saved = ctr = rdfs32(A20_TEST_ADDR); + + while (loops--) { + wrfs32(++ctr, A20_TEST_ADDR); + io_delay(); /* Serialize and make delay constant */ + ok = rdgs32(A20_TEST_ADDR+0x10) ^ ctr; + if (ok) + break; + } + + wrfs32(saved, A20_TEST_ADDR); + return ok; +} + +/* Quick test to see if A20 is already enabled */ +static int a20_test_short(void) +{ + return a20_test(A20_TEST_SHORT); +} + +/* Longer test that actually waits for A20 to come on line; this + is useful when dealing with the KBC or other slow external circuitry. */ +static int a20_test_long(void) +{ + return a20_test(A20_TEST_LONG); +} + +static void enable_a20_bios(void) +{ + asm volatile("pushfl; int $0x15; popfl" + : : "a" ((u16)0x2401)); +} + +static void enable_a20_kbc(void) +{ + empty_8042(); + + outb(0xd1, 0x64); /* Command write */ + empty_8042(); + + outb(0xdf, 0x60); /* A20 on */ + empty_8042(); +} + +static void enable_a20_fast(void) +{ + u8 port_a; + + port_a = inb(0x92); /* Configuration port A */ + port_a |= 0x02; /* Enable A20 */ + port_a &= ~0x01; /* Do not reset machine */ + outb(port_a, 0x92); +} + +/* + * Actual routine to enable A20; return 0 on ok, -1 on failure + */ + +#define A20_ENABLE_LOOPS 255 /* Number of times to try */ + +int enable_a20(void) +{ + int loops = A20_ENABLE_LOOPS; + +#if defined(CONFIG_X86_ELAN) + /* Elan croaks if we try to touch the KBC */ + enable_a20_fast(); + while (!a20_test_long()) + ; + return 0; +#elif defined(CONFIG_X86_VOYAGER) + /* On Voyager, a20_test() is unsafe? */ + enable_a20_kbc(); + return 0; +#else + while (loops--) { + /* First, check to see if A20 is already enabled + (legacy free, etc.) */ + if (a20_test_short()) + return 0; + + /* Next, try the BIOS (INT 0x15, AX=0x2401) */ + enable_a20_bios(); + if (a20_test_short()) + return 0; + + /* Try enabling A20 through the keyboard controller */ + empty_8042(); + if (a20_test_short()) + return 0; /* BIOS worked, but with delayed reaction */ + + enable_a20_kbc(); + if (a20_test_long()) + return 0; + + /* Finally, try enabling the "fast A20 gate" */ + enable_a20_fast(); + if (a20_test_long()) + return 0; + } + + return -1; +#endif +} diff --git a/arch/i386/boot/apm.c b/arch/i386/boot/apm.c new file mode 100644 index 000000000000..a34087c370c0 --- /dev/null +++ b/arch/i386/boot/apm.c @@ -0,0 +1,97 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * Original APM BIOS checking by Stephen Rothwell, May 1994 + * (sfr@canb.auug.org.au) + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/apm.c + * + * Get APM BIOS information + */ + +#include "boot.h" + +#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) + +int query_apm_bios(void) +{ + u16 ax, bx, cx, dx, di; + u32 ebx, esi; + u8 err; + + /* APM BIOS installation check */ + ax = 0x5300; + bx = cx = 0; + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0" + : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx) + : : "esi", "edi"); + + if (err) + return -1; /* No APM BIOS */ + + if (bx != 0x504d) /* "PM" signature */ + return -1; + + if (cx & 0x02) /* 32 bits supported? */ + return -1; + + /* Disconnect first, just in case */ + ax = 0x5304; + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp" + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); + + /* Paranoia */ + ebx = esi = 0; + cx = dx = di = 0; + + /* 32-bit connect */ + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6" + : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx), + "+S" (esi), "+D" (di), "=m" (err) + : "a" (0x5303)); + + boot_params.apm_bios_info.cseg = ax; + boot_params.apm_bios_info.offset = ebx; + boot_params.apm_bios_info.cseg_16 = cx; + boot_params.apm_bios_info.dseg = dx; + boot_params.apm_bios_info.cseg_len = (u16)esi; + boot_params.apm_bios_info.cseg_16_len = esi >> 16; + boot_params.apm_bios_info.dseg_len = di; + + if (err) + return -1; + + /* Redo the installation check as the 32-bit connect; + some BIOSes return different flags this way... */ + + ax = 0x5300; + bx = cx = 0; + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0" + : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx) + : : "esi", "edi"); + + if (err || bx != 0x504d) { + /* Failure with 32-bit connect, try to disconect and ignore */ + ax = 0x5304; + bx = 0; + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp" + : "+a" (ax), "+b" (bx) + : : "ecx", "edx", "esi", "edi"); + return -1; + } + + boot_params.apm_bios_info.version = ax; + boot_params.apm_bios_info.flags = cx; + return 0; +} + +#endif diff --git a/arch/i386/boot/bitops.h b/arch/i386/boot/bitops.h new file mode 100644 index 000000000000..8dcc8dc7db88 --- /dev/null +++ b/arch/i386/boot/bitops.h @@ -0,0 +1,45 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/bitops.h + * + * Very simple bitops for the boot code. + */ + +#ifndef BOOT_BITOPS_H +#define BOOT_BITOPS_H +#define _LINUX_BITOPS_H /* Inhibit inclusion of <linux/bitops.h> */ + +static inline int constant_test_bit(int nr, const void *addr) +{ + const u32 *p = (const u32 *)addr; + return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0; +} +static inline int variable_test_bit(int nr, const void *addr) +{ + u8 v; + const u32 *p = (const u32 *)addr; + + asm("btl %2,%1; setc %0" : "=qm" (v) : "m" (*p), "Ir" (nr)); + return v; +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + constant_test_bit((nr),(addr)) : \ + variable_test_bit((nr),(addr))) + +static inline void set_bit(int nr, void *addr) +{ + asm("btsl %1,%0" : "+m" (*(u32 *)addr) : "Ir" (nr)); +} + +#endif /* BOOT_BITOPS_H */ diff --git a/arch/i386/boot/boot.h b/arch/i386/boot/boot.h new file mode 100644 index 000000000000..0329c4fe4f88 --- /dev/null +++ b/arch/i386/boot/boot.h @@ -0,0 +1,296 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/boot.h + * + * Header file for the real-mode kernel code + */ + +#ifndef BOOT_BOOT_H +#define BOOT_BOOT_H + +#ifndef __ASSEMBLY__ + +#include <stdarg.h> +#include <linux/types.h> +#include <linux/edd.h> +#include <asm/boot.h> +#include <asm/bootparam.h> + +/* Useful macros */ +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) + +extern struct setup_header hdr; +extern struct boot_params boot_params; + +/* Basic port I/O */ +static inline void outb(u8 v, u16 port) +{ + asm volatile("outb %0,%1" : : "a" (v), "dN" (port)); +} +static inline u8 inb(u16 port) +{ + u8 v; + asm volatile("inb %1,%0" : "=a" (v) : "dN" (port)); + return v; +} + +static inline void outw(u16 v, u16 port) +{ + asm volatile("outw %0,%1" : : "a" (v), "dN" (port)); +} +static inline u16 inw(u16 port) +{ + u16 v; + asm volatile("inw %1,%0" : "=a" (v) : "dN" (port)); + return v; +} + +static inline void outl(u32 v, u16 port) +{ + asm volatile("outl %0,%1" : : "a" (v), "dn" (port)); +} +static inline u32 inl(u32 port) +{ + u32 v; + asm volatile("inl %1,%0" : "=a" (v) : "dN" (port)); + return v; +} + +static inline void io_delay(void) +{ + const u16 DELAY_PORT = 0x80; + asm volatile("outb %%al,%0" : : "dN" (DELAY_PORT)); +} + +/* These functions are used to reference data in other segments. */ + +static inline u16 ds(void) +{ + u16 seg; + asm("movw %%ds,%0" : "=rm" (seg)); + return seg; +} + +static inline void set_fs(u16 seg) +{ + asm volatile("movw %0,%%fs" : : "rm" (seg)); +} +static inline u16 fs(void) +{ + u16 seg; + asm("movw %%fs,%0" : "=rm" (seg)); + return seg; +} + +static inline void set_gs(u16 seg) +{ + asm volatile("movw %0,%%gs" : : "rm" (seg)); +} +static inline u16 gs(void) +{ + u16 seg; + asm("movw %%gs,%0" : "=rm" (seg)); + return seg; +} + +typedef unsigned int addr_t; + +static inline u8 rdfs8(addr_t addr) +{ + u8 v; + asm("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr)); + return v; +} +static inline u16 rdfs16(addr_t addr) +{ + u16 v; + asm("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr)); + return v; +} +static inline u32 rdfs32(addr_t addr) +{ + u32 v; + asm("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr)); + return v; +} + +static inline void wrfs8(u8 v, addr_t addr) +{ + asm volatile("movb %1,%%fs:%0" : "+m" (*(u8 *)addr) : "r" (v)); +} +static inline void wrfs16(u16 v, addr_t addr) +{ + asm volatile("movw %1,%%fs:%0" : "+m" (*(u16 *)addr) : "r" (v)); +} +static inline void wrfs32(u32 v, addr_t addr) +{ + asm volatile("movl %1,%%fs:%0" : "+m" (*(u32 *)addr) : "r" (v)); +} + +static inline u8 rdgs8(addr_t addr) +{ + u8 v; + asm("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr)); + return v; +} +static inline u16 rdgs16(addr_t addr) +{ + u16 v; + asm("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr)); + return v; +} +static inline u32 rdgs32(addr_t addr) +{ + u32 v; + asm("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr)); + return v; +} + +static inline void wrgs8(u8 v, addr_t addr) +{ + asm volatile("movb %1,%%gs:%0" : "+m" (*(u8 *)addr) : "r" (v)); +} +static inline void wrgs16(u16 v, addr_t addr) +{ + asm volatile("movw %1,%%gs:%0" : "+m" (*(u16 *)addr) : "r" (v)); +} +static inline void wrgs32(u32 v, addr_t addr) +{ + asm volatile("movl %1,%%gs:%0" : "+m" (*(u32 *)addr) : "r" (v)); +} + +/* Note: these only return true/false, not a signed return value! */ +static inline int memcmp(const void *s1, const void *s2, size_t len) +{ + u8 diff; + asm("repe; cmpsb; setnz %0" + : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); + return diff; +} + +static inline int memcmp_fs(const void *s1, addr_t s2, size_t len) +{ + u8 diff; + asm("fs; repe; cmpsb; setnz %0" + : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); + return diff; +} +static inline int memcmp_gs(const void *s1, addr_t s2, size_t len) +{ + u8 diff; + asm("gs; repe; cmpsb; setnz %0" + : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); + return diff; +} + +static inline int isdigit(int ch) +{ + return (ch >= '0') && (ch <= '9'); +} + +/* Heap -- available for dynamic lists. */ +#define STACK_SIZE 512 /* Minimum number of bytes for stack */ + +extern char _end[]; +extern char *HEAP; +extern char *heap_end; +#define RESET_HEAP() ((void *)( HEAP = _end )) +static inline char *__get_heap(size_t s, size_t a, size_t n) +{ + char *tmp; + + HEAP = (char *)(((size_t)HEAP+(a-1)) & ~(a-1)); + tmp = HEAP; + HEAP += s*n; + return tmp; +} +#define GET_HEAP(type, n) \ + ((type *)__get_heap(sizeof(type),__alignof__(type),(n))) + +static inline int heap_free(void) +{ + return heap_end-HEAP; +} + +/* copy.S */ + +void copy_to_fs(addr_t dst, void *src, size_t len); +void *copy_from_fs(void *dst, addr_t src, size_t len); +void copy_to_gs(addr_t dst, void *src, size_t len); +void *copy_from_gs(void *dst, addr_t src, size_t len); +void *memcpy(void *dst, void *src, size_t len); +void *memset(void *dst, int c, size_t len); + +#define memcpy(d,s,l) __builtin_memcpy(d,s,l) +#define memset(d,c,l) __builtin_memset(d,c,l) + +/* a20.c */ +int enable_a20(void); + +/* apm.c */ +int query_apm_bios(void); + +/* cmdline.c */ +int cmdline_find_option(const char *option, char *buffer, int bufsize); + +/* cpu.c, cpucheck.c */ +int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr); +int validate_cpu(void); + +/* edd.c */ +void query_edd(void); + +/* header.S */ +void __attribute__((noreturn)) die(void); + +/* mca.c */ +int query_mca(void); + +/* memory.c */ +int detect_memory(void); + +/* pm.c */ +void __attribute__((noreturn)) go_to_protected_mode(void); + +/* pmjump.S */ +void __attribute__((noreturn)) + protected_mode_jump(u32 entrypoint, u32 bootparams); + +/* printf.c */ +int sprintf(char *buf, const char *fmt, ...); +int vsprintf(char *buf, const char *fmt, va_list args); +int printf(const char *fmt, ...); + +/* string.c */ +int strcmp(const char *str1, const char *str2); +size_t strnlen(const char *s, size_t maxlen); +unsigned int atou(const char *s); + +/* tty.c */ +void puts(const char *); +void putchar(int); +int getchar(void); +void kbd_flush(void); +int getchar_timeout(void); + +/* video.c */ +void set_video(void); + +/* video-vesa.c */ +void vesa_store_edid(void); + +/* voyager.c */ +int query_voyager(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* BOOT_BOOT_H */ diff --git a/arch/i386/boot/bootsect.S b/arch/i386/boot/bootsect.S deleted file mode 100644 index 011b7a4993d4..000000000000 --- a/arch/i386/boot/bootsect.S +++ /dev/null @@ -1,98 +0,0 @@ -/* - * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds - * - * modified by Drew Eckhardt - * modified by Bruce Evans (bde) - * modified by Chris Noe (May 1999) (as86 -> gas) - * gutted by H. Peter Anvin (Jan 2003) - * - * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment - * addresses must be multiplied by 16 to obtain their respective linear - * addresses. To avoid confusion, linear addresses are written using leading - * hex while segment addresses are written as segment:offset. - * - */ - -#include <asm/boot.h> - -SETUPSECTS = 4 /* default nr of setup-sectors */ -BOOTSEG = 0x07C0 /* original address of boot-sector */ -INITSEG = DEF_INITSEG /* we move boot here - out of the way */ -SETUPSEG = DEF_SETUPSEG /* setup starts here */ -SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ -SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ - /* to be loaded */ -ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ -SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */ - -#ifndef SVGA_MODE -#define SVGA_MODE ASK_VGA -#endif - -#ifndef RAMDISK -#define RAMDISK 0 -#endif - -#ifndef ROOT_RDONLY -#define ROOT_RDONLY 1 -#endif - -.code16 -.text - -.global _start -_start: - - # Normalize the start address - jmpl $BOOTSEG, $start2 - -start2: - movw %cs, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %ss - movw $0x7c00, %sp - sti - cld - - movw $bugger_off_msg, %si - -msg_loop: - lodsb - andb %al, %al - jz die - movb $0xe, %ah - movw $7, %bx - int $0x10 - jmp msg_loop - -die: - # Allow the user to press a key, then reboot - xorw %ax, %ax - int $0x16 - int $0x19 - - # int 0x19 should never return. In case it does anyway, - # invoke the BIOS reset code... - ljmp $0xf000,$0xfff0 - - -bugger_off_msg: - .ascii "Direct booting from floppy is no longer supported.\r\n" - .ascii "Please use a boot loader program instead.\r\n" - .ascii "\n" - .ascii "Remove disk and press any key to reboot . . .\r\n" - .byte 0 - - - # Kernel attributes; used by setup - - .org 497 -setup_sects: .byte SETUPSECTS -root_flags: .word ROOT_RDONLY -syssize: .word SYSSIZE -swap_dev: .word SWAP_DEV -ram_size: .word RAMDISK -vid_mode: .word SVGA_MODE -root_dev: .word ROOT_DEV -boot_flag: .word 0xAA55 diff --git a/arch/i386/boot/cmdline.c b/arch/i386/boot/cmdline.c new file mode 100644 index 000000000000..34bb778c4357 --- /dev/null +++ b/arch/i386/boot/cmdline.c @@ -0,0 +1,97 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/cmdline.c + * + * Simple command-line parser for early boot. + */ + +#include "boot.h" + +static inline int myisspace(u8 c) +{ + return c <= ' '; /* Close enough approximation */ +} + +/* + * Find a non-boolean option, that is, "option=argument". In accordance + * with standard Linux practice, if this option is repeated, this returns + * the last instance on the command line. + * + * Returns the length of the argument (regardless of if it was + * truncated to fit in the buffer), or -1 on not found. + */ +int cmdline_find_option(const char *option, char *buffer, int bufsize) +{ + u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr; + addr_t cptr; + char c; + int len = -1; + const char *opptr = NULL; + char *bufptr = buffer; + enum { + st_wordstart, /* Start of word/after whitespace */ + st_wordcmp, /* Comparing this word */ + st_wordskip, /* Miscompare, skip */ + st_bufcpy /* Copying this to buffer */ + } state = st_wordstart; + + if (!cmdline_ptr || cmdline_ptr >= 0x100000) + return -1; /* No command line, or inaccessible */ + + cptr = cmdline_ptr & 0xf; + set_fs(cmdline_ptr >> 4); + + while (cptr < 0x10000 && (c = rdfs8(cptr++))) { + switch (state) { + case st_wordstart: + if (myisspace(c)) + break; + + /* else */ + state = st_wordcmp; + opptr = option; + /* fall through */ + + case st_wordcmp: + if (c == '=' && !*opptr) { + len = 0; + bufptr = buffer; + state = st_bufcpy; + } else if (myisspace(c)) { + state = st_wordstart; + } else if (c != *opptr++) { + state = st_wordskip; + } + break; + + case st_wordskip: + if (myisspace(c)) + state = st_wordstart; + break; + + case st_bufcpy: + if (myisspace(c)) { + state = st_wordstart; + } else { + if (len < bufsize-1) + *bufptr++ = c; + len++; + } + break; + } + } + + if (bufsize) + *bufptr = '\0'; + + return len; +} diff --git a/arch/i386/boot/code16gcc.h b/arch/i386/boot/code16gcc.h new file mode 100644 index 000000000000..3bd848093b9d --- /dev/null +++ b/arch/i386/boot/code16gcc.h @@ -0,0 +1,15 @@ +/* + * code16gcc.h + * + * This file is -include'd when compiling 16-bit C code. + * Note: this asm() needs to be emitted before gcc omits any code. + * Depending on gcc version, this requires -fno-unit-at-a-time or + * -fno-toplevel-reorder. + * + * Hopefully gcc will eventually have a real -m16 option so we can + * drop this hack long term. + */ + +#ifndef __ASSEMBLY__ +asm(".code16gcc"); +#endif diff --git a/arch/i386/boot/compressed/Makefile b/arch/i386/boot/compressed/Makefile index a661217f33ec..189fa1dbefcc 100644 --- a/arch/i386/boot/compressed/Makefile +++ b/arch/i386/boot/compressed/Makefile @@ -9,9 +9,14 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \ EXTRA_AFLAGS := -traditional LDFLAGS_vmlinux := -T -CFLAGS_misc.o += -fPIC hostprogs-y := relocs +CFLAGS := -m32 -D__KERNEL__ $(LINUX_INCLUDE) -O2 \ + -fno-strict-aliasing -fPIC \ + $(call cc-option,-ffreestanding) \ + $(call cc-option,-fno-stack-protector) +LDFLAGS := -m elf_i386 + $(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE $(call if_changed,ld) @: diff --git a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S index 3517a32aaf41..f35ea2237522 100644 --- a/arch/i386/boot/compressed/head.S +++ b/arch/i386/boot/compressed/head.S @@ -45,10 +45,10 @@ startup_32: * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode - * data at 0x34-0x3f are used as the stack for this calculation. - * Only 4 bytes are needed. + * data at 0x1e4 (defined as a scratch field) are used as the stack + * for this calculation. Only 4 bytes are needed. */ - leal 0x40(%esi), %esp + leal (0x1e4+4)(%esi), %esp call 1f 1: popl %ebp subl $1b, %ebp diff --git a/arch/i386/boot/copy.S b/arch/i386/boot/copy.S new file mode 100644 index 000000000000..ef127e56a3cf --- /dev/null +++ b/arch/i386/boot/copy.S @@ -0,0 +1,101 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/copy.S + * + * Memory copy routines + */ + + .code16gcc + .text + + .globl memcpy + .type memcpy, @function +memcpy: + pushw %si + pushw %di + movw %ax, %di + movw %dx, %si + pushw %cx + shrw $2, %cx + rep; movsl + popw %cx + andw $3, %cx + rep; movsb + popw %di + popw %si + ret + .size memcpy, .-memcpy + + .globl memset + .type memset, @function +memset: + pushw %di + movw %ax, %di + movzbl %dl, %eax + imull $0x01010101,%eax + pushw %cx + shrw $2, %cx + rep; stosl + popw %cx + andw $3, %cx + rep; stosb + popw %di + ret + .size memset, .-memset + + .globl copy_from_fs + .type copy_from_fs, @function +copy_from_fs: + pushw %ds + pushw %fs + popw %ds + call memcpy + popw %ds + ret + .size copy_from_fs, .-copy_from_fs + + .globl copy_to_fs + .type copy_to_fs, @function +copy_to_fs: + pushw %es + pushw %fs + popw %es + call memcpy + popw %es + ret + .size copy_to_fs, .-copy_to_fs + +#if 0 /* Not currently used, but can be enabled as needed */ + + .globl copy_from_gs + .type copy_from_gs, @function +copy_from_gs: + pushw %ds + pushw %gs + popw %ds + call memcpy + popw %ds + ret + .size copy_from_gs, .-copy_from_gs + .globl copy_to_gs + + .type copy_to_gs, @function +copy_to_gs: + pushw %es + pushw %gs + popw %es + call memcpy + popw %es + ret + .size copy_to_gs, .-copy_to_gs + +#endif diff --git a/arch/i386/boot/cpu.c b/arch/i386/boot/cpu.c new file mode 100644 index 000000000000..2a5c32da5852 --- /dev/null +++ b/arch/i386/boot/cpu.c @@ -0,0 +1,69 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/cpu.c + * + * Check for obligatory CPU features and abort if the features are not + * present. + */ + +#include "boot.h" +#include "bitops.h" +#include <asm/cpufeature.h> + +static char *cpu_name(int level) +{ + static char buf[6]; + + if (level == 64) { + return "x86-64"; + } else { + sprintf(buf, "i%d86", level); + return buf; + } +} + +int validate_cpu(void) +{ + u32 *err_flags; + int cpu_level, req_level; + + check_cpu(&cpu_level, &req_level, &err_flags); + + if (cpu_level < req_level) { + printf("This kernel requires an %s CPU, ", + cpu_name(req_level)); + printf("but only detected an %s CPU.\n", + cpu_name(cpu_level)); + return -1; + } + + if (err_flags) { + int i, j; + puts("This kernel requires the following features " + "not present on the CPU:\n"); + + for (i = 0; i < NCAPINTS; i++) { + u32 e = err_flags[i]; + + for (j = 0; j < 32; j++) { + if (e & 1) + printf("%d:%d ", i, j); + + e >>= 1; + } + } + putchar('\n'); + return -1; + } else { + return 0; + } +} diff --git a/arch/i386/boot/cpucheck.c b/arch/i386/boot/cpucheck.c new file mode 100644 index 000000000000..8b0f4473b083 --- /dev/null +++ b/arch/i386/boot/cpucheck.c @@ -0,0 +1,267 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/cpucheck.c + * + * Check for obligatory CPU features and abort if the features are not + * present. This code should be compilable as 16-, 32- or 64-bit + * code, so be very careful with types and inline assembly. + * + * This code should not contain any messages; that requires an + * additional wrapper. + * + * As written, this code is not safe for inclusion into the kernel + * proper (after FPU initialization, in particular). + */ + +#ifdef _SETUP +# include "boot.h" +# include "bitops.h" +#endif +#include <linux/types.h> +#include <asm/cpufeature.h> +#include <asm/processor-flags.h> +#include <asm/required-features.h> +#include <asm/msr-index.h> + +struct cpu_features { + int level; /* Family, or 64 for x86-64 */ + int model; + u32 flags[NCAPINTS]; +}; + +static struct cpu_features cpu; +static u32 cpu_vendor[3]; +static u32 err_flags[NCAPINTS]; + +#ifdef CONFIG_X86_64 +static const int req_level = 64; +#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY) +static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY; +#else +static const int req_level = 3; +#endif + +static const u32 req_flags[NCAPINTS] = +{ + REQUIRED_MASK0, + REQUIRED_MASK1, + REQUIRED_MASK2, + REQUIRED_MASK3, + REQUIRED_MASK4, + REQUIRED_MASK5, + REQUIRED_MASK6, + REQUIRED_MASK7, +}; + +#define A32(a,b,c,d) (((d) << 24)+((c) << 16)+((b) << 8)+(a)) + +static int is_amd(void) +{ + return cpu_vendor[0] == A32('A','u','t','h') && + cpu_vendor[1] == A32('e','n','t','i') && + cpu_vendor[2] == A32('c','A','M','D'); +} + +static int is_centaur(void) +{ + return cpu_vendor[0] == A32('C','e','n','t') && + cpu_vendor[1] == A32('a','u','r','H') && + cpu_vendor[2] == A32('a','u','l','s'); +} + +static int is_transmeta(void) +{ + return cpu_vendor[0] == A32('G','e','n','u') && + cpu_vendor[1] == A32('i','n','e','T') && + cpu_vendor[2] == A32('M','x','8','6'); +} + +static int has_fpu(void) +{ + u16 fcw = -1, fsw = -1; + u32 cr0; + + asm("movl %%cr0,%0" : "=r" (cr0)); + if (cr0 & (X86_CR0_EM|X86_CR0_TS)) { + cr0 &= ~(X86_CR0_EM|X86_CR0_TS); + asm volatile("movl %0,%%cr0" : : "r" (cr0)); + } + + asm("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw)); + + return fsw == 0 && (fcw & 0x103f) == 0x003f; +} + +static int has_eflag(u32 mask) +{ + u32 f0, f1; + + asm("pushfl ; " + "pushfl ; " + "popl %0 ; " + "movl %0,%1 ; " + "xorl %2,%1 ; " + "pushl %1 ; " + "popfl ; " + "pushfl ; " + "popl %1 ; " + "popfl" + : "=r" (f0), "=r" (f1) + : "g" (mask)); + + return !!((f0^f1) & mask); +} + +static void get_flags(void) +{ + u32 max_intel_level, max_amd_level; + u32 tfms; + + if (has_fpu()) + set_bit(X86_FEATURE_FPU, cpu.flags); + + if (has_eflag(X86_EFLAGS_ID)) { + asm("cpuid" + : "=a" (max_intel_level), + "=b" (cpu_vendor[0]), + "=d" (cpu_vendor[1]), + "=c" (cpu_vendor[2]) + : "a" (0)); + + if (max_intel_level >= 0x00000001 && + max_intel_level <= 0x0000ffff) { + asm("cpuid" + : "=a" (tfms), + "=c" (cpu.flags[4]), + "=d" (cpu.flags[0]) + : "a" (0x00000001) + : "ebx"); + cpu.level = (tfms >> 8) & 15; + cpu.model = (tfms >> 4) & 15; + if (cpu.level >= 6) + cpu.model += ((tfms >> 16) & 0xf) << 4; + } + + asm("cpuid" + : "=a" (max_amd_level) + : "a" (0x80000000) + : "ebx", "ecx", "edx"); + + if (max_amd_level >= 0x80000001 && + max_amd_level <= 0x8000ffff) { + u32 eax = 0x80000001; + asm("cpuid" + : "+a" (eax), + "=c" (cpu.flags[6]), + "=d" (cpu.flags[1]) + : : "ebx"); + } + } +} + +/* Returns a bitmask of which words we have error bits in */ +static int check_flags(void) +{ + u32 err; + int i; + + err = 0; + for (i = 0; i < NCAPINTS; i++) { + err_flags[i] = req_flags[i] & ~cpu.flags[i]; + if (err_flags[i]) + err |= 1 << i; + } + + return err; +} + +/* + * Returns -1 on error. + * + * *cpu_level is set to the current CPU level; *req_level to the required + * level. x86-64 is considered level 64 for this purpose. + * + * *err_flags_ptr is set to the flags error array if there are flags missing. + */ +int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr) +{ + int err; + + memset(&cpu.flags, 0, sizeof cpu.flags); + cpu.level = 3; + + if (has_eflag(X86_EFLAGS_AC)) + cpu.level = 4; + + get_flags(); + err = check_flags(); + + if (test_bit(X86_FEATURE_LM, cpu.flags)) + cpu.level = 64; + + if (err == 0x01 && + !(err_flags[0] & + ~((1 << X86_FEATURE_XMM)|(1 << X86_FEATURE_XMM2))) && + is_amd()) { + /* If this is an AMD and we're only missing SSE+SSE2, try to + turn them on */ + + u32 ecx = MSR_K7_HWCR; + u32 eax, edx; + + asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx)); + eax &= ~(1 << 15); + asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx)); + + get_flags(); /* Make sure it really did something */ + err = check_flags(); + } else if (err == 0x01 && + !(err_flags[0] & ~(1 << X86_FEATURE_CX8)) && + is_centaur() && cpu.model >= 6) { + /* If this is a VIA C3, we might have to enable CX8 + explicitly */ + + u32 ecx = MSR_VIA_FCR; + u32 eax, edx; + + asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx)); + eax |= (1<<1)|(1<<7); + asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx)); + + set_bit(X86_FEATURE_CX8, cpu.flags); + err = check_flags(); + } else if (err == 0x01 && is_transmeta()) { + /* Transmeta might have masked feature bits in word 0 */ + + u32 ecx = 0x80860004; + u32 eax, edx; + u32 level = 1; + + asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx)); + asm("wrmsr" : : "a" (~0), "d" (edx), "c" (ecx)); + asm("cpuid" + : "+a" (level), "=d" (cpu.flags[0]) + : : "ecx", "ebx"); + asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx)); + + err = check_flags(); + } + + if (err_flags_ptr) + *err_flags_ptr = err ? err_flags : NULL; + if (cpu_level_ptr) + *cpu_level_ptr = cpu.level; + if (req_level_ptr) + *req_level_ptr = req_level; + + return (cpu.level < req_level || err) ? -1 : 0; +} diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S deleted file mode 100644 index 34321368011a..000000000000 --- a/arch/i386/boot/edd.S +++ /dev/null @@ -1,231 +0,0 @@ -/* - * BIOS Enhanced Disk Drive support - * Copyright (C) 2002, 2003, 2004 Dell, Inc. - * by Matt Domsch <Matt_Domsch@dell.com> October 2002 - * conformant to T13 Committee www.t13.org - * projects 1572D, 1484D, 1386D, 1226DT - * disk signature read by Matt Domsch <Matt_Domsch@dell.com> - * and Andrew Wilks <Andrew_Wilks@dell.com> September 2003, June 2004 - * legacy CHS retrieval by Patrick J. LoPresti <patl@users.sourceforge.net> - * March 2004 - * Command line option parsing, Matt Domsch, November 2004 - */ - -#include <linux/edd.h> -#include <asm/setup.h> - -#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) - -# It is assumed that %ds == INITSEG here - - movb $0, (EDD_MBR_SIG_NR_BUF) - movb $0, (EDDNR) - -# Check the command line for options: -# edd=of disables EDD completely (edd=off) -# edd=sk skips the MBR test (edd=skipmbr) -# edd=on re-enables EDD (edd=on) - - pushl %esi - movw $edd_mbr_sig_start, %di # Default to edd=on - - movl %cs:(cmd_line_ptr), %esi - andl %esi, %esi - jz old_cl # Old boot protocol? - -# Convert to a real-mode pointer in fs:si - movl %esi, %eax - shrl $4, %eax - movw %ax, %fs - andw $0xf, %si - jmp have_cl_pointer - -# Old-style boot protocol? -old_cl: - push %ds # aka INITSEG - pop %fs - - cmpw $0xa33f, (0x20) - jne done_cl # No command line at all? - movw (0x22), %si # Pointer relative to INITSEG - -# fs:si has the pointer to the command line now -have_cl_pointer: - -# Loop through kernel command line one byte at a time. Just in -# case the loader is buggy and failed to null-terminate the command line -# terminate if we get close enough to the end of the segment that we -# cannot fit "edd=XX"... -cl_atspace: - cmpw $-5, %si # Watch for segment wraparound - jae done_cl - movl %fs:(%si), %eax - andb %al, %al # End of line? - jz done_cl - cmpl $EDD_CL_EQUALS, %eax - jz found_edd_equals - cmpb $0x20, %al # <= space consider whitespace - ja cl_skipword - incw %si - jmp cl_atspace - -cl_skipword: - cmpw $-5, %si # Watch for segment wraparound - jae done_cl - movb %fs:(%si), %al # End of string? - andb %al, %al - jz done_cl - cmpb $0x20, %al - jbe cl_atspace - incw %si - jmp cl_skipword - -found_edd_equals: -# only looking at first two characters after equals -# late overrides early on the command line, so keep going after finding something - movw %fs:4(%si), %ax - cmpw $EDD_CL_OFF, %ax # edd=of - je do_edd_off - cmpw $EDD_CL_SKIP, %ax # edd=sk - je do_edd_skipmbr - cmpw $EDD_CL_ON, %ax # edd=on - je do_edd_on - jmp cl_skipword -do_edd_skipmbr: - movw $edd_start, %di - jmp cl_skipword -do_edd_off: - movw $edd_done, %di - jmp cl_skipword -do_edd_on: - movw $edd_mbr_sig_start, %di - jmp cl_skipword - -done_cl: - popl %esi - jmpw *%di - -# Read the first sector of each BIOS disk device and store the 4-byte signature -edd_mbr_sig_start: - movb $0x80, %dl # from device 80 - movw $EDD_MBR_SIG_BUF, %bx # store buffer ptr in bx -edd_mbr_sig_read: - movl $0xFFFFFFFF, %eax - movl %eax, (%bx) # assume failure - pushw %bx - movb $READ_SECTORS, %ah - movb $1, %al # read 1 sector - movb $0, %dh # at head 0 - movw $1, %cx # cylinder 0, sector 0 - pushw %es - pushw %ds - popw %es - movw $EDDBUF, %bx # disk's data goes into EDDBUF - pushw %dx # work around buggy BIOSes - stc # work around buggy BIOSes - int $0x13 - sti # work around buggy BIOSes - popw %dx - popw %es - popw %bx - jc edd_mbr_sig_done # on failure, we're done. - cmpb $0, %ah # some BIOSes do not set CF - jne edd_mbr_sig_done # on failure, we're done. - movl (EDDBUF+EDD_MBR_SIG_OFFSET), %eax # read sig out of the MBR - movl %eax, (%bx) # store success - incb (EDD_MBR_SIG_NR_BUF) # note that we stored something - incb %dl # increment to next device - addw $4, %bx # increment sig buffer ptr - cmpb $EDD_MBR_SIG_MAX, (EDD_MBR_SIG_NR_BUF) # Out of space? - jb edd_mbr_sig_read # keep looping -edd_mbr_sig_done: - -# Do the BIOS Enhanced Disk Drive calls -# This consists of two calls: -# int 13h ah=41h "Check Extensions Present" -# int 13h ah=48h "Get Device Parameters" -# int 13h ah=08h "Legacy Get Device Parameters" -# -# A buffer of size EDDMAXNR*(EDDEXTSIZE+EDDPARMSIZE) is reserved for our use -# in the boot_params at EDDBUF. The first four bytes of which are -# used to store the device number, interface support map and version -# results from fn41. The next four bytes are used to store the legacy -# cylinders, heads, and sectors from fn08. The following 74 bytes are used to -# store the results from fn48. Starting from device 80h, fn41, then fn48 -# are called and their results stored in EDDBUF+n*(EDDEXTSIZE+EDDPARMIZE). -# Then the pointer is incremented to store the data for the next call. -# This repeats until either a device doesn't exist, or until EDDMAXNR -# devices have been stored. -# The one tricky part is that ds:si always points EDDEXTSIZE bytes into -# the structure, and the fn41 and fn08 results are stored at offsets -# from there. This removes the need to increment the pointer for -# every store, and leaves it ready for the fn48 call. -# A second one-byte buffer, EDDNR, in the boot_params stores -# the number of BIOS devices which exist, up to EDDMAXNR. -# In setup.c, copy_edd() stores both boot_params buffers away -# for later use, as they would get overwritten otherwise. -# This code is sensitive to the size of the structs in edd.h -edd_start: - # %ds points to the bootsector - # result buffer for fn48 - movw $EDDBUF+EDDEXTSIZE, %si # in ds:si, fn41 results - # kept just before that - movb $0x80, %dl # BIOS device 0x80 - -edd_check_ext: - movb $CHECKEXTENSIONSPRESENT, %ah # Function 41 - movw $EDDMAGIC1, %bx # magic - int $0x13 # make the call - jc edd_done # no more BIOS devices - - cmpw $EDDMAGIC2, %bx # is magic right? - jne edd_next # nope, next... - - movb %dl, %ds:-8(%si) # store device number - movb %ah, %ds:-7(%si) # store version - movw %cx, %ds:-6(%si) # store extensions - incb (EDDNR) # note that we stored something - -edd_get_device_params: - movw $EDDPARMSIZE, %ds:(%si) # put size - movw $0x0, %ds:2(%si) # work around buggy BIOSes - movb $GETDEVICEPARAMETERS, %ah # Function 48 - int $0x13 # make the call - # Don't check for fail return - # it doesn't matter. -edd_get_legacy_chs: - xorw %ax, %ax - movw %ax, %ds:-4(%si) - movw %ax, %ds:-2(%si) - # Ralf Brown's Interrupt List says to set ES:DI to - # 0000h:0000h "to guard against BIOS bugs" - pushw %es - movw %ax, %es - movw %ax, %di - pushw %dx # legacy call clobbers %dl - movb $LEGACYGETDEVICEPARAMETERS, %ah # Function 08 - int $0x13 # make the call - jc edd_legacy_done # failed - movb %cl, %al # Low 6 bits are max - andb $0x3F, %al # sector number - movb %al, %ds:-1(%si) # Record max sect - movb %dh, %ds:-2(%si) # Record max head number - movb %ch, %al # Low 8 bits of max cyl - shr $6, %cl - movb %cl, %ah # High 2 bits of max cyl - movw %ax, %ds:-4(%si) - -edd_legacy_done: - popw %dx - popw %es - movw %si, %ax # increment si - addw $EDDPARMSIZE+EDDEXTSIZE, %ax - movw %ax, %si - -edd_next: - incb %dl # increment to next device - cmpb $EDDMAXNR, (EDDNR) # Out of space? - jb edd_check_ext # keep looping - -edd_done: -#endif diff --git a/arch/i386/boot/edd.c b/arch/i386/boot/edd.c new file mode 100644 index 000000000000..25a282494f4c --- /dev/null +++ b/arch/i386/boot/edd.c @@ -0,0 +1,196 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/edd.c + * + * Get EDD BIOS disk information + */ + +#include "boot.h" +#include <linux/edd.h> + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) + +struct edd_dapa { + u8 pkt_size; + u8 rsvd; + u16 sector_cnt; + u16 buf_off, buf_seg; + u64 lba; + u64 buf_lin_addr; +}; + +/* + * Read the MBR (first sector) from a specific device. + */ +static int read_mbr(u8 devno, void *buf) +{ + struct edd_dapa dapa; + u16 ax, bx, cx, dx, si; + + memset(&dapa, 0, sizeof dapa); + dapa.pkt_size = sizeof(dapa); + dapa.sector_cnt = 1; + dapa.buf_off = (size_t)buf; + dapa.buf_seg = ds(); + /* dapa.lba = 0; */ + + ax = 0x4200; /* Extended Read */ + si = (size_t)&dapa; + dx = devno; + asm("pushfl; stc; int $0x13; setc %%al; popfl" + : "+a" (ax), "+S" (si), "+d" (dx) + : "m" (dapa) + : "ebx", "ecx", "edi", "memory"); + + if (!(u8)ax) + return 0; /* OK */ + + ax = 0x0201; /* Legacy Read, one sector */ + cx = 0x0001; /* Sector 0-0-1 */ + dx = devno; + bx = (size_t)buf; + asm("pushfl; stc; int $0x13; setc %%al; popfl" + : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx) + : : "esi", "edi", "memory"); + + return -(u8)ax; /* 0 or -1 */ +} + +static u32 read_mbr_sig(u8 devno, struct edd_info *ei) +{ + int sector_size; + char *mbrbuf_ptr, *mbrbuf_end; + u32 mbrsig; + u32 buf_base, mbr_base; + extern char _end[]; + static char mbr_buf[1024]; + + sector_size = ei->params.bytes_per_sector; + if (!sector_size) + sector_size = 512; /* Best available guess */ + + buf_base = (ds() << 4) + (u32)&_end; + mbr_base = (buf_base+sector_size-1) & ~(sector_size-1); + mbrbuf_ptr = mbr_buf + (mbr_base-buf_base); + mbrbuf_end = mbrbuf_ptr + sector_size; + + if (!(boot_params.hdr.loadflags & CAN_USE_HEAP)) + return 0; + if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr) + return 0; + + if (read_mbr(devno, mbrbuf_ptr)) + return 0; + + mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET]; + return mbrsig; +} + +static int get_edd_info(u8 devno, struct edd_info *ei) +{ + u16 ax, bx, cx, dx, di; + + memset(ei, 0, sizeof *ei); + + /* Check Extensions Present */ + + ax = 0x4100; + bx = EDDMAGIC1; + dx = devno; + asm("pushfl; stc; int $0x13; setc %%al; popfl" + : "+a" (ax), "+b" (bx), "=c" (cx), "+d" (dx) + : : "esi", "edi"); + + if ((u8)ax) + return -1; /* No extended information */ + + if (bx != EDDMAGIC2) + return -1; + + ei->device = devno; + ei->version = ax >> 8; /* EDD version number */ + ei->interface_support = cx; /* EDD functionality subsets */ + + /* Extended Get Device Parameters */ + + ei->params.length = sizeof(ei->params); + ax = 0x4800; + dx = devno; + asm("pushfl; int $0x13; popfl" + : "+a" (ax), "+d" (dx) + : "S" (&ei->params) + : "ebx", "ecx", "edi"); + + /* Get legacy CHS parameters */ + + /* Ralf Brown recommends setting ES:DI to 0:0 */ + ax = 0x0800; + dx = devno; + di = 0; + asm("pushw %%es; " + "movw %%di,%%es; " + "pushfl; stc; int $0x13; setc %%al; popfl; " + "popw %%es" + : "+a" (ax), "=b" (bx), "=c" (cx), "+d" (dx), "+D" (di) + : : "esi"); + + if ((u8)ax == 0) { + ei->legacy_max_cylinder = (cx >> 8) + ((cx & 0xc0) << 2); + ei->legacy_max_head = dx >> 8; + ei->legacy_sectors_per_track = cx & 0x3f; + } + + return 0; +} + +void query_edd(void) +{ + char eddarg[8]; + int do_mbr = 1; + int do_edd = 1; + int devno; + struct edd_info ei, *edp; + + if (cmdline_find_option("edd", eddarg, sizeof eddarg) > 0) { + if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) + do_mbr = 0; + else if (!strcmp(eddarg, "off")) + do_edd = 0; + } + + edp = (struct edd_info *)boot_params.eddbuf; + + if (!do_edd) + return; + + for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) { + /* + * Scan the BIOS-supported hard disks and query EDD + * information... + */ + get_edd_info(devno, &ei); + + if (boot_params.eddbuf_entries < EDDMAXNR) { + memcpy(edp, &ei, sizeof ei); + edp++; + boot_params.eddbuf_entries++; + } + + if (do_mbr) { + u32 mbr_sig; + mbr_sig = read_mbr_sig(devno, &ei); + boot_params.edd_mbr_sig_buffer[devno-0x80] = mbr_sig; + } + } +} + +#endif diff --git a/arch/i386/boot/header.S b/arch/i386/boot/header.S new file mode 100644 index 000000000000..6b9923fb6eae --- /dev/null +++ b/arch/i386/boot/header.S @@ -0,0 +1,283 @@ +/* + * header.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Based on bootsect.S and setup.S + * modified by more people than can be counted + * + * Rewritten as a common file by H. Peter Anvin (Apr 2007) + * + * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment + * addresses must be multiplied by 16 to obtain their respective linear + * addresses. To avoid confusion, linear addresses are written using leading + * hex while segment addresses are written as segment:offset. + * + */ + +#include <asm/segment.h> +#include <linux/utsrelease.h> +#include <asm/boot.h> +#include <asm/e820.h> +#include <asm/page.h> +#include <asm/setup.h> +#include "boot.h" + +SETUPSECTS = 4 /* default nr of setup-sectors */ +BOOTSEG = 0x07C0 /* original address of boot-sector */ +SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ +SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ + /* to be loaded */ +ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ +SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */ + +#ifndef SVGA_MODE +#define SVGA_MODE ASK_VGA +#endif + +#ifndef RAMDISK +#define RAMDISK 0 +#endif + +#ifndef ROOT_RDONLY +#define ROOT_RDONLY 1 +#endif + + .code16 + .section ".bstext", "ax" + + .global bootsect_start +bootsect_start: + + # Normalize the start address + ljmp $BOOTSEG, $start2 + +start2: + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + xorw %sp, %sp + sti + cld + + movw $bugger_off_msg, %si + +msg_loop: + lodsb + andb %al, %al + jz bs_die + movb $0xe, %ah + movw $7, %bx + int $0x10 + jmp msg_loop + +bs_die: + # Allow the user to press a key, then reboot + xorw %ax, %ax + int $0x16 + int $0x19 + + # int 0x19 should never return. In case it does anyway, + # invoke the BIOS reset code... + ljmp $0xf000,$0xfff0 + + .section ".bsdata", "a" +bugger_off_msg: + .ascii "Direct booting from floppy is no longer supported.\r\n" + .ascii "Please use a boot loader program instead.\r\n" + .ascii "\n" + .ascii "Remove disk and press any key to reboot . . .\r\n" + .byte 0 + + + # Kernel attributes; used by setup. This is part 1 of the + # header, from the old boot sector. + + .section ".header", "a" + .globl hdr +hdr: +setup_sects: .byte SETUPSECTS +root_flags: .word ROOT_RDONLY +syssize: .long SYSSIZE +ram_size: .word RAMDISK +vid_mode: .word SVGA_MODE +root_dev: .word ROOT_DEV +boot_flag: .word 0xAA55 + + # offset 512, entry point + + .globl _start +_start: + # Explicitly enter this as bytes, or the assembler + # tries to generate a 3-byte jump here, which causes + # everything else to push off to the wrong offset. + .byte 0xeb # short (2-byte) jump + .byte start_of_setup-1f +1: + + # Part 2 of the header, from the old setup.S + + .ascii "HdrS" # header signature + .word 0x0206 # header version number (>= 0x0105) + # or else old loadlin-1.5 will fail) + .globl realmode_swtch +realmode_swtch: .word 0, 0 # default_switch, SETUPSEG +start_sys_seg: .word SYSSEG + .word kernel_version-512 # pointing to kernel version string + # above section of header is compatible + # with loadlin-1.5 (header v1.5). Don't + # change it. + +type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, + # Bootlin, SYSLX, bootsect...) + # See Documentation/i386/boot.txt for + # assigned ids + +# flags, unused bits must be zero (RFU) bit within loadflags +loadflags: +LOADED_HIGH = 1 # If set, the kernel is loaded high +CAN_USE_HEAP = 0x80 # If set, the loader also has set + # heap_end_ptr to tell how much + # space behind setup.S can be used for + # heap purposes. + # Only the loader knows what is free +#ifndef __BIG_KERNEL__ + .byte 0 +#else + .byte LOADED_HIGH +#endif + +setup_move_size: .word 0x8000 # size to move, when setup is not + # loaded at 0x90000. We will move setup + # to 0x90000 then just before jumping + # into the kernel. However, only the + # loader knows how much data behind + # us also needs to be loaded. + +code32_start: # here loaders can put a different + # start address for 32-bit code. +#ifndef __BIG_KERNEL__ + .long 0x1000 # 0x1000 = default for zImage +#else + .long 0x100000 # 0x100000 = default for big kernel +#endif + +ramdisk_image: .long 0 # address of loaded ramdisk image + # Here the loader puts the 32-bit + # address where it loaded the image. + # This only will be read by the kernel. + +ramdisk_size: .long 0 # its size in bytes + +bootsect_kludge: + .long 0 # obsolete + +heap_end_ptr: .word _end+1024 # (Header version 0x0201 or later) + # space from here (exclusive) down to + # end of setup code can be used by setup + # for local heap purposes. + +pad1: .word 0 +cmd_line_ptr: .long 0 # (Header version 0x0202 or later) + # If nonzero, a 32-bit pointer + # to the kernel command line. + # The command line should be + # located between the start of + # setup and the end of low + # memory (0xa0000), or it may + # get overwritten before it + # gets read. If this field is + # used, there is no longer + # anything magical about the + # 0x90000 segment; the setup + # can be located anywhere in + # low memory 0x10000 or higher. + +ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff + # (Header version 0x0203 or later) + # The highest safe address for + # the contents of an initrd + +kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment + #required for protected mode + #kernel +#ifdef CONFIG_RELOCATABLE +relocatable_kernel: .byte 1 +#else +relocatable_kernel: .byte 0 +#endif +pad2: .byte 0 +pad3: .word 0 + +cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, + #added with boot protocol + #version 2.06 + +# End of setup header ##################################################### + + .section ".inittext", "ax" +start_of_setup: +#ifdef SAFE_RESET_DISK_CONTROLLER +# Reset the disk controller. + movw $0x0000, %ax # Reset disk controller + movb $0x80, %dl # All disks + int $0x13 +#endif + +# We will have entired with %cs = %ds+0x20, normalize %cs so +# it is on par with the other segments. + pushw %ds + pushw $setup2 + lretw + +setup2: +# Force %es = %ds + movw %ds, %ax + movw %ax, %es + cld + +# Stack paranoia: align the stack and make sure it is good +# for both 16- and 32-bit references. In particular, if we +# were meant to have been using the full 16-bit segment, the +# caller might have set %sp to zero, which breaks %esp-based +# references. + andw $~3, %sp # dword align (might as well...) + jnz 1f + movw $0xfffc, %sp # Make sure we're not zero +1: movzwl %sp, %esp # Clear upper half of %esp + sti + +# Check signature at end of setup + cmpl $0x5a5aaa55, setup_sig + jne setup_bad + +# Zero the bss + movw $__bss_start, %di + movw $_end+3, %cx + xorl %eax, %eax + subw %di, %cx + shrw $2, %cx + rep; stosl + +# Jump to C code (should not return) + calll main + +# Setup corrupt somehow... +setup_bad: + movl $setup_corrupt, %eax + calll puts + # Fall through... + + .globl die + .type die, @function +die: + hlt + jmp die + + .size die, .-due + + .section ".initdata", "a" +setup_corrupt: + .byte 7 + .string "No setup signature found..." diff --git a/arch/i386/boot/main.c b/arch/i386/boot/main.c new file mode 100644 index 000000000000..7f01f96c4fb8 --- /dev/null +++ b/arch/i386/boot/main.c @@ -0,0 +1,161 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/main.c + * + * Main module for the real-mode kernel code + */ + +#include "boot.h" + +struct boot_params boot_params __attribute__((aligned(16))); + +char *HEAP = _end; +char *heap_end = _end; /* Default end of heap = no heap */ + +/* + * Copy the header into the boot parameter block. Since this + * screws up the old-style command line protocol, adjust by + * filling in the new-style command line pointer instead. + */ +#define OLD_CL_MAGIC 0xA33F +#define OLD_CL_ADDRESS 0x20 + +static void copy_boot_params(void) +{ + struct old_cmdline { + u16 cl_magic; + u16 cl_offset; + }; + const struct old_cmdline * const oldcmd = + (const struct old_cmdline *)OLD_CL_ADDRESS; + + BUILD_BUG_ON(sizeof boot_params != 4096); + memcpy(&boot_params.hdr, &hdr, sizeof hdr); + + if (!boot_params.hdr.cmd_line_ptr && + oldcmd->cl_magic == OLD_CL_MAGIC) { + /* Old-style command line protocol. */ + u16 cmdline_seg; + + /* Figure out if the command line falls in the region + of memory that an old kernel would have copied up + to 0x90000... */ + if (oldcmd->cl_offset < boot_params.hdr.setup_move_size) + cmdline_seg = ds(); + else + cmdline_seg = 0x9000; + + boot_params.hdr.cmd_line_ptr = + (cmdline_seg << 4) + oldcmd->cl_offset; + } +} + +/* + * Set the keyboard repeat rate to maximum. Unclear why this + * is done here; this might be possible to kill off as stale code. + */ +static void keyboard_set_repeat(void) +{ + u16 ax = 0x0305; + u16 bx = 0; + asm volatile("int $0x16" + : "+a" (ax), "+b" (bx) + : : "ecx", "edx", "esi", "edi"); +} + +/* + * Get Intel SpeedStep IST information. + */ +static void query_speedstep_ist(void) +{ + asm("int $0x15" + : "=a" (boot_params.speedstep_info[0]), + "=b" (boot_params.speedstep_info[1]), + "=c" (boot_params.speedstep_info[2]), + "=d" (boot_params.speedstep_info[3]) + : "a" (0x0000e980), /* IST Support */ + "d" (0x47534943)); /* Request value */ +} + +/* + * Tell the BIOS what CPU mode we intend to run in. + */ +static void set_bios_mode(void) +{ +#ifdef CONFIG_X86_64 + u32 eax, ebx; + + eax = 0xec00; + ebx = 2; + asm volatile("int $0x15" + : "+a" (eax), "+b" (ebx) + : : "ecx", "edx", "esi", "edi"); +#endif +} + +void main(void) +{ + /* First, copy the boot header into the "zeropage" */ + copy_boot_params(); + + /* End of heap check */ + if (boot_params.hdr.loadflags & CAN_USE_HEAP) { + heap_end = (char *)(boot_params.hdr.heap_end_ptr + +0x200-STACK_SIZE); + } else { + /* Boot protocol 2.00 only, no heap available */ + puts("WARNING: Ancient bootloader, some functionality " + "may be limited!\n"); + } + + /* Make sure we have all the proper CPU support */ + if (validate_cpu()) { + puts("Unable to boot - please use a kernel appropriate " + "for your CPU.\n"); + die(); + } + + /* Tell the BIOS what CPU mode we intend to run in. */ + set_bios_mode(); + + /* Detect memory layout */ + detect_memory(); + + /* Set keyboard repeat rate (why?) */ + keyboard_set_repeat(); + + /* Set the video mode */ + set_video(); + + /* Query MCA information */ + query_mca(); + + /* Voyager */ +#ifdef CONFIG_X86_VOYAGER + query_voyager(); +#endif + + /* Query SpeedStep IST information */ + query_speedstep_ist(); + + /* Query APM information */ +#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) + query_apm_bios(); +#endif + + /* Query EDD information */ +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) + query_edd(); +#endif + /* Do the last things and invoke protected mode */ + go_to_protected_mode(); +} diff --git a/arch/i386/boot/mca.c b/arch/i386/boot/mca.c new file mode 100644 index 000000000000..9b68bd1aef19 --- /dev/null +++ b/arch/i386/boot/mca.c @@ -0,0 +1,43 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/mca.c + * + * Get the MCA system description table + */ + +#include "boot.h" + +int query_mca(void) +{ + u8 err; + u16 es, bx, len; + + asm("pushw %%es ; " + "int $0x15 ; " + "setc %0 ; " + "movw %%es, %1 ; " + "popw %%es" + : "=acdSDm" (err), "=acdSDm" (es), "=b" (bx) + : "a" (0xc000)); + + if (err) + return -1; /* No MCA present */ + + set_fs(es); + len = rdfs16(bx); + + if (len > sizeof(boot_params.sys_desc_table)) + len = sizeof(boot_params.sys_desc_table); + + copy_from_fs(&boot_params.sys_desc_table, bx, len); + return 0; +} diff --git a/arch/i386/boot/memory.c b/arch/i386/boot/memory.c new file mode 100644 index 000000000000..1a2e62db8bed --- /dev/null +++ b/arch/i386/boot/memory.c @@ -0,0 +1,99 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/memory.c + * + * Memory detection code + */ + +#include "boot.h" + +#define SMAP 0x534d4150 /* ASCII "SMAP" */ + +static int detect_memory_e820(void) +{ + u32 next = 0; + u32 size, id; + u8 err; + struct e820entry *desc = boot_params.e820_map; + + do { + size = sizeof(struct e820entry); + id = SMAP; + asm("int $0x15; setc %0" + : "=am" (err), "+b" (next), "+d" (id), "+c" (size), + "=m" (*desc) + : "D" (desc), "a" (0xe820)); + + if (err || id != SMAP) + break; + + boot_params.e820_entries++; + desc++; + } while (next && boot_params.e820_entries < E820MAX); + + return boot_params.e820_entries; +} + +static int detect_memory_e801(void) +{ + u16 ax, bx, cx, dx; + u8 err; + + bx = cx = dx = 0; + ax = 0xe801; + asm("stc; int $0x15; setc %0" + : "=m" (err), "+a" (ax), "+b" (bx), "+c" (cx), "+d" (dx)); + + if (err) + return -1; + + /* Do we really need to do this? */ + if (cx || dx) { + ax = cx; + bx = dx; + } + + if (ax > 15*1024) + return -1; /* Bogus! */ + + /* This ignores memory above 16MB if we have a memory hole + there. If someone actually finds a machine with a memory + hole at 16MB and no support for 0E820h they should probably + generate a fake e820 map. */ + boot_params.alt_mem_k = (ax == 15*1024) ? (dx << 6)+ax : ax; + + return 0; +} + +static int detect_memory_88(void) +{ + u16 ax; + u8 err; + + ax = 0x8800; + asm("stc; int $0x15; setc %0" : "=bcdm" (err), "+a" (ax)); + + boot_params.screen_info.ext_mem_k = ax; + + return -err; +} + +int detect_memory(void) +{ + if (detect_memory_e820() > 0) + return 0; + + if (!detect_memory_e801()) + return 0; + + return detect_memory_88(); +} diff --git a/arch/i386/boot/pm.c b/arch/i386/boot/pm.c new file mode 100644 index 000000000000..3fa53e15ed77 --- /dev/null +++ b/arch/i386/boot/pm.c @@ -0,0 +1,170 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/pm.c + * + * Prepare the machine for transition to protected mode. + */ + +#include "boot.h" +#include <asm/segment.h> + +/* + * Invoke the realmode switch hook if present; otherwise + * disable all interrupts. + */ +static void realmode_switch_hook(void) +{ + if (boot_params.hdr.realmode_swtch) { + asm volatile("lcallw *%0" + : : "m" (boot_params.hdr.realmode_swtch) + : "eax", "ebx", "ecx", "edx"); + } else { + asm volatile("cli"); + outb(0x80, 0x70); /* Disable NMI */ + io_delay(); + } +} + +/* + * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000. + * A bzImage kernel is loaded and runs at 0x100000. + */ +static void move_kernel_around(void) +{ + /* Note: rely on the compile-time option here rather than + the LOADED_HIGH flag. The Qemu kernel loader unconditionally + sets the loadflags to zero. */ +#ifndef __BIG_KERNEL__ + u16 dst_seg, src_seg; + u32 syssize; + + dst_seg = 0x1000 >> 4; + src_seg = 0x10000 >> 4; + syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */ + + while (syssize) { + int paras = (syssize >= 0x1000) ? 0x1000 : syssize; + int dwords = paras << 2; + + asm volatile("pushw %%es ; " + "pushw %%ds ; " + "movw %1,%%es ; " + "movw %2,%%ds ; " + "xorw %%di,%%di ; " + "xorw %%si,%%si ; " + "rep;movsl ; " + "popw %%ds ; " + "popw %%es" + : "+c" (dwords) + : "rm" (dst_seg), "rm" (src_seg) + : "esi", "edi"); + + syssize -= paras; + dst_seg += paras; + src_seg += paras; + } +#endif +} + +/* + * Disable all interrupts at the legacy PIC. + */ +static void mask_all_interrupts(void) +{ + outb(0xff, 0xa1); /* Mask all interrupts on the seconday PIC */ + io_delay(); + outb(0xfb, 0x21); /* Mask all but cascade on the primary PIC */ + io_delay(); +} + +/* + * Reset IGNNE# if asserted in the FPU. + */ +static void reset_coprocessor(void) +{ + outb(0, 0xf0); + io_delay(); + outb(0, 0xf1); + io_delay(); +} + +/* + * Set up the GDT + */ +#define GDT_ENTRY(flags,base,limit) \ + (((u64)(base & 0xff000000) << 32) | \ + ((u64)flags << 40) | \ + ((u64)(limit & 0x00ff0000) << 32) | \ + ((u64)(base & 0x00ffff00) << 16) | \ + ((u64)(limit & 0x0000ffff))) + +struct gdt_ptr { + u16 len; + u32 ptr; +} __attribute__((packed)); + +static void setup_gdt(void) +{ + /* There are machines which are known to not boot with the GDT + being 8-byte unaligned. Intel recommends 16 byte alignment. */ + static const u64 boot_gdt[] __attribute__((aligned(16))) = { + /* CS: code, read/execute, 4 GB, base 0 */ + [GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff), + /* DS: data, read/write, 4 GB, base 0 */ + [GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff), + }; + struct gdt_ptr gdt; + + gdt.len = sizeof(boot_gdt)-1; + gdt.ptr = (u32)&boot_gdt + (ds() << 4); + + asm volatile("lgdtl %0" : : "m" (gdt)); +} + +/* + * Set up the IDT + */ +static void setup_idt(void) +{ + static const struct gdt_ptr null_idt = {0, 0}; + asm volatile("lidtl %0" : : "m" (null_idt)); +} + +/* + * Actual invocation sequence + */ +void go_to_protected_mode(void) +{ + /* Hook before leaving real mode, also disables interrupts */ + realmode_switch_hook(); + + /* Move the kernel/setup to their final resting places */ + move_kernel_around(); + + /* Enable the A20 gate */ + if (enable_a20()) { + puts("A20 gate not responding, unable to boot...\n"); + die(); + } + + /* Reset coprocessor (IGNNE#) */ + reset_coprocessor(); + + /* Mask all interrupts in the PIC */ + mask_all_interrupts(); + + /* Actual transition to protected mode... */ + setup_idt(); + setup_gdt(); + protected_mode_jump(boot_params.hdr.code32_start, + (u32)&boot_params + (ds() << 4)); +} diff --git a/arch/i386/boot/pmjump.S b/arch/i386/boot/pmjump.S new file mode 100644 index 000000000000..2e559233725a --- /dev/null +++ b/arch/i386/boot/pmjump.S @@ -0,0 +1,54 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/pmjump.S + * + * The actual transition into protected mode + */ + +#include <asm/boot.h> +#include <asm/segment.h> + + .text + + .globl protected_mode_jump + .type protected_mode_jump, @function + + .code16 + +/* + * void protected_mode_jump(u32 entrypoint, u32 bootparams); + */ +protected_mode_jump: + xorl %ebx, %ebx # Flag to indicate this is a boot + movl %edx, %esi # Pointer to boot_params table + movl %eax, 2f # Patch ljmpl instruction + jmp 1f # Short jump to flush instruction q. + +1: + movw $__BOOT_DS, %cx + + movl %cr0, %edx + orb $1, %dl # Protected mode (PE) bit + movl %edx, %cr0 + + movw %cx, %ds + movw %cx, %es + movw %cx, %fs + movw %cx, %gs + movw %cx, %ss + + # Jump to the 32-bit entrypoint + .byte 0x66, 0xea # ljmpl opcode +2: .long 0 # offset + .word __BOOT_CS # segment + + .size protected_mode_jump, .-protected_mode_jump diff --git a/arch/i386/boot/printf.c b/arch/i386/boot/printf.c new file mode 100644 index 000000000000..1a09f9309d3c --- /dev/null +++ b/arch/i386/boot/printf.c @@ -0,0 +1,307 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/printf.c + * + * Oh, it's a waste of space, but oh-so-yummy for debugging. This + * version of printf() does not include 64-bit support. "Live with + * it." + * + */ + +#include "boot.h" + +static int skip_atoi(const char **s) +{ + int i = 0; + + while (isdigit(**s)) + i = i * 10 + *((*s)++) - '0'; + return i; +} + +#define ZEROPAD 1 /* pad with zero */ +#define SIGN 2 /* unsigned/signed long */ +#define PLUS 4 /* show plus */ +#define SPACE 8 /* space if plus */ +#define LEFT 16 /* left justified */ +#define SPECIAL 32 /* 0x */ +#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ + +#define do_div(n,base) ({ \ +int __res; \ +__res = ((unsigned long) n) % (unsigned) base; \ +n = ((unsigned long) n) / (unsigned) base; \ +__res; }) + +static char *number(char *str, long num, int base, int size, int precision, + int type) +{ + char c, sign, tmp[66]; + const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz"; + int i; + + if (type & LARGE) + digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; + if (type & LEFT) + type &= ~ZEROPAD; + if (base < 2 || base > 36) + return 0; + c = (type & ZEROPAD) ? '0' : ' '; + sign = 0; + if (type & SIGN) { + if (num < 0) { + sign = '-'; + num = -num; + size--; + } else if (type & PLUS) { + sign = '+'; + size--; + } else if (type & SPACE) { + sign = ' '; + size--; + } + } + if (type & SPECIAL) { + if (base == 16) + size -= 2; + else if (base == 8) + size--; + } + i = 0; + if (num == 0) + tmp[i++] = '0'; + else + while (num != 0) + tmp[i++] = digits[do_div(num, base)]; + if (i > precision) + precision = i; + size -= precision; + if (!(type & (ZEROPAD + LEFT))) + while (size-- > 0) + *str++ = ' '; + if (sign) + *str++ = sign; + if (type & SPECIAL) { + if (base == 8) + *str++ = '0'; + else if (base == 16) { + *str++ = '0'; + *str++ = digits[33]; + } + } + if (!(type & LEFT)) + while (size-- > 0) + *str++ = c; + while (i < precision--) + *str++ = '0'; + while (i-- > 0) + *str++ = tmp[i]; + while (size-- > 0) + *str++ = ' '; + return str; +} + +int vsprintf(char *buf, const char *fmt, va_list args) +{ + int len; + unsigned long num; + int i, base; + char *str; + const char *s; + + int flags; /* flags to number() */ + + int field_width; /* width of output field */ + int precision; /* min. # of digits for integers; max + number of chars for from string */ + int qualifier; /* 'h', 'l', or 'L' for integer fields */ + + for (str = buf; *fmt; ++fmt) { + if (*fmt != '%') { + *str++ = *fmt; + continue; + } + + /* process flags */ + flags = 0; + repeat: + ++fmt; /* this also skips first '%' */ + switch (*fmt) { + case '-': + flags |= LEFT; + goto repeat; + case '+': + flags |= PLUS; + goto repeat; + case ' ': + flags |= SPACE; + goto repeat; + case '#': + flags |= SPECIAL; + goto repeat; + case '0': + flags |= ZEROPAD; + goto repeat; + } + + /* get field width */ + field_width = -1; + if (isdigit(*fmt)) + field_width = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + field_width = va_arg(args, int); + if (field_width < 0) { + field_width = -field_width; + flags |= LEFT; + } + } + + /* get the precision */ + precision = -1; + if (*fmt == '.') { + ++fmt; + if (isdigit(*fmt)) + precision = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + precision = va_arg(args, int); + } + if (precision < 0) + precision = 0; + } + + /* get the conversion qualifier */ + qualifier = -1; + if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') { + qualifier = *fmt; + ++fmt; + } + + /* default base */ + base = 10; + + switch (*fmt) { + case 'c': + if (!(flags & LEFT)) + while (--field_width > 0) + *str++ = ' '; + *str++ = (unsigned char)va_arg(args, int); + while (--field_width > 0) + *str++ = ' '; + continue; + + case 's': + s = va_arg(args, char *); + len = strnlen(s, precision); + + if (!(flags & LEFT)) + while (len < field_width--) + *str++ = ' '; + for (i = 0; i < len; ++i) + *str++ = *s++; + while (len < field_width--) + *str++ = ' '; + continue; + + case 'p': + if (field_width == -1) { + field_width = 2 * sizeof(void *); + flags |= ZEROPAD; + } + str = number(str, + (unsigned long)va_arg(args, void *), 16, + field_width, precision, flags); + continue; + + case 'n': + if (qualifier == 'l') { + long *ip = va_arg(args, long *); + *ip = (str - buf); + } else { + int *ip = va_arg(args, int *); + *ip = (str - buf); + } + continue; + + case '%': + *str++ = '%'; + continue; + + /* integer number formats - set up the flags and "break" */ + case 'o': + base = 8; + break; + + case 'X': + flags |= LARGE; + case 'x': + base = 16; + break; + + case 'd': + case 'i': + flags |= SIGN; + case 'u': + break; + + default: + *str++ = '%'; + if (*fmt) + *str++ = *fmt; + else + --fmt; + continue; + } + if (qualifier == 'l') + num = va_arg(args, unsigned long); + else if (qualifier == 'h') { + num = (unsigned short)va_arg(args, int); + if (flags & SIGN) + num = (short)num; + } else if (flags & SIGN) + num = va_arg(args, int); + else + num = va_arg(args, unsigned int); + str = number(str, num, base, field_width, precision, flags); + } + *str = '\0'; + return str - buf; +} + +int sprintf(char *buf, const char *fmt, ...) +{ + va_list args; + int i; + + va_start(args, fmt); + i = vsprintf(buf, fmt, args); + va_end(args); + return i; +} + +int printf(const char *fmt, ...) +{ + char printf_buf[1024]; + va_list args; + int printed; + + va_start(args, fmt); + printed = vsprintf(printf_buf, fmt, args); + va_end(args); + + puts(printf_buf); + + return printed; +} diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S deleted file mode 100644 index 6dbcc95b2120..000000000000 --- a/arch/i386/boot/setup.S +++ /dev/null @@ -1,1075 +0,0 @@ -/* - * setup.S Copyright (C) 1991, 1992 Linus Torvalds - * - * setup.s is responsible for getting the system data from the BIOS, - * and putting them into the appropriate places in system memory. - * both setup.s and system has been loaded by the bootblock. - * - * This code asks the bios for memory/disk/other parameters, and - * puts them in a "safe" place: 0x90000-0x901FF, ie where the - * boot-block used to be. It is then up to the protected mode - * system to read them from there before the area is overwritten - * for buffer-blocks. - * - * Move PS/2 aux init code to psaux.c - * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92 - * - * some changes and additional features by Christoph Niemann, - * March 1993/June 1994 (Christoph.Niemann@linux.org) - * - * add APM BIOS checking by Stephen Rothwell, May 1994 - * (sfr@canb.auug.org.au) - * - * High load stuff, initrd support and position independency - * by Hans Lermen & Werner Almesberger, February 1996 - * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch> - * - * Video handling moved to video.S by Martin Mares, March 1996 - * <mj@k332.feld.cvut.cz> - * - * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david - * parsons) to avoid loadlin confusion, July 1997 - * - * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. - * <stiker@northlink.com> - * - * Fix to work around buggy BIOSes which don't use carry bit correctly - * and/or report extended memory in CX/DX for e801h memory size detection - * call. As a result the kernel got wrong figures. The int15/e801h docs - * from Ralf Brown interrupt list seem to indicate AX/BX should be used - * anyway. So to avoid breaking many machines (presumably there was a reason - * to orginally use CX/DX instead of AX/BX), we do a kludge to see - * if CX/DX have been changed in the e801 call and if so use AX/BX . - * Michael Miller, April 2001 <michaelm@mjmm.org> - * - * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes - * by Robert Schwebel, December 2001 <robert@schwebel.de> - */ - -#include <asm/segment.h> -#include <linux/utsrelease.h> -#include <linux/compile.h> -#include <asm/boot.h> -#include <asm/e820.h> -#include <asm/page.h> -#include <asm/setup.h> - -/* Signature words to ensure LILO loaded us right */ -#define SIG1 0xAA55 -#define SIG2 0x5A5A - -INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way -SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536). -SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment - # ... and the former contents of CS - -DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020 - -.code16 -.globl begtext, begdata, begbss, endtext, enddata, endbss - -.text -begtext: -.data -begdata: -.bss -begbss: -.text - -start: - jmp trampoline - -# This is the setup header, and it must start at %cs:2 (old 0x9020:2) - - .ascii "HdrS" # header signature - .word 0x0206 # header version number (>= 0x0105) - # or else old loadlin-1.5 will fail) -realmode_swtch: .word 0, 0 # default_switch, SETUPSEG -start_sys_seg: .word SYSSEG - .word kernel_version # pointing to kernel version string - # above section of header is compatible - # with loadlin-1.5 (header v1.5). Don't - # change it. - -type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, - # Bootlin, SYSLX, bootsect...) - # See Documentation/i386/boot.txt for - # assigned ids - -# flags, unused bits must be zero (RFU) bit within loadflags -loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free -#ifndef __BIG_KERNEL__ - .byte 0 -#else - .byte LOADED_HIGH -#endif - -setup_move_size: .word 0x8000 # size to move, when setup is not - # loaded at 0x90000. We will move setup - # to 0x90000 then just before jumping - # into the kernel. However, only the - # loader knows how much data behind - # us also needs to be loaded. - -code32_start: # here loaders can put a different - # start address for 32-bit code. -#ifndef __BIG_KERNEL__ - .long 0x1000 # 0x1000 = default for zImage -#else - .long 0x100000 # 0x100000 = default for big kernel -#endif - -ramdisk_image: .long 0 # address of loaded ramdisk image - # Here the loader puts the 32-bit - # address where it loaded the image. - # This only will be read by the kernel. - -ramdisk_size: .long 0 # its size in bytes - -bootsect_kludge: - .long 0 # obsolete - -heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later) - # space from here (exclusive) down to - # end of setup code can be used by setup - # for local heap purposes. - -pad1: .word 0 -cmd_line_ptr: .long 0 # (Header version 0x0202 or later) - # If nonzero, a 32-bit pointer - # to the kernel command line. - # The command line should be - # located between the start of - # setup and the end of low - # memory (0xa0000), or it may - # get overwritten before it - # gets read. If this field is - # used, there is no longer - # anything magical about the - # 0x90000 segment; the setup - # can be located anywhere in - # low memory 0x10000 or higher. - -ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff - # (Header version 0x0203 or later) - # The highest safe address for - # the contents of an initrd - -kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment - #required for protected mode - #kernel -#ifdef CONFIG_RELOCATABLE -relocatable_kernel: .byte 1 -#else -relocatable_kernel: .byte 0 -#endif -pad2: .byte 0 -pad3: .word 0 - -cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, - #added with boot protocol - #version 2.06 - -trampoline: call start_of_setup - .align 16 - # The offset at this point is 0x240 - .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff) -# End of setup header ##################################################### - -start_of_setup: -# Bootlin depends on this being done early - movw $0x01500, %ax - movb $0x81, %dl - int $0x13 - -#ifdef SAFE_RESET_DISK_CONTROLLER -# Reset the disk controller. - movw $0x0000, %ax - movb $0x80, %dl - int $0x13 -#endif - -# Set %ds = %cs, we know that SETUPSEG = %cs at this point - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds -# Check signature at end of setup - cmpw $SIG1, setup_sig1 - jne bad_sig - - cmpw $SIG2, setup_sig2 - jne bad_sig - - jmp good_sig1 - -# Routine to print asciiz string at ds:si -prtstr: - lodsb - andb %al, %al - jz fin - - call prtchr - jmp prtstr - -fin: ret - -# Space printing -prtsp2: call prtspc # Print double space -prtspc: movb $0x20, %al # Print single space (note: fall-thru) - -# Part of above routine, this one just prints ascii al -prtchr: pushw %ax - pushw %cx - movw $7,%bx - movw $0x01, %cx - movb $0x0e, %ah - int $0x10 - popw %cx - popw %ax - ret - -beep: movb $0x07, %al - jmp prtchr - -no_sig_mess: .string "No setup signature found ..." - -good_sig1: - jmp good_sig - -# We now have to find the rest of the setup code/data -bad_sig: - movw %cs, %ax # SETUPSEG - subw $DELTA_INITSEG, %ax # INITSEG - movw %ax, %ds - xorb %bh, %bh - movb (497), %bl # get setup sect from bootsect - subw $4, %bx # LILO loads 4 sectors of setup - shlw $8, %bx # convert to words (1sect=2^8 words) - movw %bx, %cx - shrw $3, %bx # convert to segment - addw $SYSSEG, %bx - movw %bx, %cs:start_sys_seg -# Move rest of setup code/data to here - movw $2048, %di # four sectors loaded by LILO - subw %si, %si - pushw %cs - popw %es - movw $SYSSEG, %ax - movw %ax, %ds - rep - movsw - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds - cmpw $SIG1, setup_sig1 - jne no_sig - - cmpw $SIG2, setup_sig2 - jne no_sig - - jmp good_sig - -no_sig: - lea no_sig_mess, %si - call prtstr - -no_sig_loop: - hlt - jmp no_sig_loop - -good_sig: - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds -# Check if an old loader tries to load a big-kernel - testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel? - jz loader_ok # No, no danger for old loaders. - - cmpb $0, %cs:type_of_loader # Do we have a loader that - # can deal with us? - jnz loader_ok # Yes, continue. - - pushw %cs # No, we have an old loader, - popw %ds # die. - lea loader_panic_mess, %si - call prtstr - - jmp no_sig_loop - -loader_panic_mess: .string "Wrong loader, giving up..." - -# check minimum cpuid -# we do this here because it is the last place we can actually -# show a user visible error message. Later the video modus -# might be already messed up. -loader_ok: - call verify_cpu - testl %eax,%eax - jz cpu_ok - movw %cs,%ax # aka SETUPSEG - movw %ax,%ds - lea cpu_panic_mess,%si - call prtstr -1: jmp 1b - -cpu_panic_mess: - .asciz "PANIC: CPU too old for this kernel." - -#include "../kernel/verify_cpu.S" - -cpu_ok: -# Get memory size (extended mem, kB) - - xorl %eax, %eax - movl %eax, (0x1e0) -#ifndef STANDARD_MEMORY_BIOS_CALL - movb %al, (E820NR) -# Try three different memory detection schemes. First, try -# e820h, which lets us assemble a memory map, then try e801h, -# which returns a 32-bit memory size, and finally 88h, which -# returns 0-64m - -# method E820H: -# the memory map from hell. e820h returns memory classified into -# a whole bunch of different types, and allows memory holes and -# everything. We scan through this memory map and build a list -# of the first 32 memory areas, which we return at [E820MAP]. -# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification. - -#define SMAP 0x534d4150 - -meme820: - xorl %ebx, %ebx # continuation counter - movw $E820MAP, %di # point into the whitelist - # so we can have the bios - # directly write into it. - -jmpe820: - movl $0x0000e820, %eax # e820, upper word zeroed - movl $SMAP, %edx # ascii 'SMAP' - movl $20, %ecx # size of the e820rec - pushw %ds # data record. - popw %es - int $0x15 # make the call - jc bail820 # fall to e801 if it fails - - cmpl $SMAP, %eax # check the return is `SMAP' - jne bail820 # fall to e801 if it fails - -# cmpl $1, 16(%di) # is this usable memory? -# jne again820 - - # If this is usable memory, we save it by simply advancing %di by - # sizeof(e820rec). - # -good820: - movb (E820NR), %al # up to 128 entries - cmpb $E820MAX, %al - jae bail820 - - incb (E820NR) - movw %di, %ax - addw $20, %ax - movw %ax, %di -again820: - cmpl $0, %ebx # check to see if - jne jmpe820 # %ebx is set to EOF -bail820: - - -# method E801H: -# memory size is in 1k chunksizes, to avoid confusing loadlin. -# we store the 0xe801 memory size in a completely different place, -# because it will most likely be longer than 16 bits. -# (use 1e0 because that's what Larry Augustine uses in his -# alternative new memory detection scheme, and it's sensible -# to write everything into the same place.) - -meme801: - stc # fix to work around buggy - xorw %cx,%cx # BIOSes which don't clear/set - xorw %dx,%dx # carry on pass/error of - # e801h memory size call - # or merely pass cx,dx though - # without changing them. - movw $0xe801, %ax - int $0x15 - jc mem88 - - cmpw $0x0, %cx # Kludge to handle BIOSes - jne e801usecxdx # which report their extended - cmpw $0x0, %dx # memory in AX/BX rather than - jne e801usecxdx # CX/DX. The spec I have read - movw %ax, %cx # seems to indicate AX/BX - movw %bx, %dx # are more reasonable anyway... - -e801usecxdx: - andl $0xffff, %edx # clear sign extend - shll $6, %edx # and go from 64k to 1k chunks - movl %edx, (0x1e0) # store extended memory size - andl $0xffff, %ecx # clear sign extend - addl %ecx, (0x1e0) # and add lower memory into - # total size. - -# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or -# 64mb, depending on the bios) in ax. -mem88: - -#endif - movb $0x88, %ah - int $0x15 - movw %ax, (2) - -# Set the keyboard repeat rate to the max - movw $0x0305, %ax - xorw %bx, %bx - int $0x16 - -# Check for video adapter and its parameters and allow the -# user to browse video modes. - call video # NOTE: we need %ds pointing - # to bootsector - -# Get hd0 data... - xorw %ax, %ax - movw %ax, %ds - ldsw (4 * 0x41), %si - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - pushw %ax - movw %ax, %es - movw $0x0080, %di - movw $0x10, %cx - pushw %cx - cld - rep - movsb -# Get hd1 data... - xorw %ax, %ax - movw %ax, %ds - ldsw (4 * 0x46), %si - popw %cx - popw %es - movw $0x0090, %di - rep - movsb -# Check that there IS a hd1 :-) - movw $0x01500, %ax - movb $0x81, %dl - int $0x13 - jc no_disk1 - - cmpb $3, %ah - je is_disk1 - -no_disk1: - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %es - movw $0x0090, %di - movw $0x10, %cx - xorw %ax, %ax - cld - rep - stosb -is_disk1: -# check for Micro Channel (MCA) bus - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds - xorw %ax, %ax - movw %ax, (0xa0) # set table length to 0 - movb $0xc0, %ah - stc - int $0x15 # moves feature table to es:bx - jc no_mca - - pushw %ds - movw %es, %ax - movw %ax, %ds - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %es - movw %bx, %si - movw $0xa0, %di - movw (%si), %cx - addw $2, %cx # table length is a short - cmpw $0x10, %cx - jc sysdesc_ok - - movw $0x10, %cx # we keep only first 16 bytes -sysdesc_ok: - rep - movsb - popw %ds -no_mca: -#ifdef CONFIG_X86_VOYAGER - movb $0xff, 0x40 # flag on config found - movb $0xc0, %al - mov $0xff, %ah - int $0x15 # put voyager config info at es:di - jc no_voyager - movw $0x40, %si # place voyager info in apm table - cld - movw $7, %cx -voyager_rep: - movb %es:(%di), %al - movb %al,(%si) - incw %di - incw %si - decw %cx - jnz voyager_rep -no_voyager: -#endif -# Check for PS/2 pointing device - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds - movb $0, (0x1ff) # default is no pointing device - int $0x11 # int 0x11: equipment list - testb $0x04, %al # check if mouse installed - jz no_psmouse - - movb $0xAA, (0x1ff) # device present -no_psmouse: - -#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) - movl $0x0000E980, %eax # IST Support - movl $0x47534943, %edx # Request value - int $0x15 - - movl %eax, (96) - movl %ebx, (100) - movl %ecx, (104) - movl %edx, (108) -#endif - -#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) -# Then check for an APM BIOS... - # %ds points to the bootsector - movw $0, 0x40 # version = 0 means no APM BIOS - movw $0x05300, %ax # APM BIOS installation check - xorw %bx, %bx - int $0x15 - jc done_apm_bios # Nope, no APM BIOS - - cmpw $0x0504d, %bx # Check for "PM" signature - jne done_apm_bios # No signature, no APM BIOS - - andw $0x02, %cx # Is 32 bit supported? - je done_apm_bios # No 32-bit, no (good) APM BIOS - - movw $0x05304, %ax # Disconnect first just in case - xorw %bx, %bx - int $0x15 # ignore return code - movw $0x05303, %ax # 32 bit connect - xorl %ebx, %ebx - xorw %cx, %cx # paranoia :-) - xorw %dx, %dx # ... - xorl %esi, %esi # ... - xorw %di, %di # ... - int $0x15 - jc no_32_apm_bios # Ack, error. - - movw %ax, (66) # BIOS code segment - movl %ebx, (68) # BIOS entry point offset - movw %cx, (72) # BIOS 16 bit code segment - movw %dx, (74) # BIOS data segment - movl %esi, (78) # BIOS code segment lengths - movw %di, (82) # BIOS data segment length -# Redo the installation check as the 32 bit connect -# modifies the flags returned on some BIOSs - movw $0x05300, %ax # APM BIOS installation check - xorw %bx, %bx - xorw %cx, %cx # paranoia - int $0x15 - jc apm_disconnect # error -> shouldn't happen - - cmpw $0x0504d, %bx # check for "PM" signature - jne apm_disconnect # no sig -> shouldn't happen - - movw %ax, (64) # record the APM BIOS version - movw %cx, (76) # and flags - jmp done_apm_bios - -apm_disconnect: # Tidy up - movw $0x05304, %ax # Disconnect - xorw %bx, %bx - int $0x15 # ignore return code - - jmp done_apm_bios - -no_32_apm_bios: - andw $0xfffd, (76) # remove 32 bit support bit -done_apm_bios: -#endif - -#include "edd.S" - -# Now we want to move to protected mode ... - cmpw $0, %cs:realmode_swtch - jz rmodeswtch_normal - - lcall *%cs:realmode_swtch - - jmp rmodeswtch_end - -rmodeswtch_normal: - pushw %cs - call default_switch - -rmodeswtch_end: -# Now we move the system to its rightful place ... but we check if we have a -# big-kernel. In that case we *must* not move it ... - testb $LOADED_HIGH, %cs:loadflags - jz do_move0 # .. then we have a normal low - # loaded zImage - # .. or else we have a high - # loaded bzImage - jmp end_move # ... and we skip moving - -do_move0: - movw $0x100, %ax # start of destination segment - movw %cs, %bp # aka SETUPSEG - subw $DELTA_INITSEG, %bp # aka INITSEG - movw %cs:start_sys_seg, %bx # start of source segment - cld -do_move: - movw %ax, %es # destination segment - incb %ah # instead of add ax,#0x100 - movw %bx, %ds # source segment - addw $0x100, %bx - subw %di, %di - subw %si, %si - movw $0x800, %cx - rep - movsw - cmpw %bp, %bx # assume start_sys_seg > 0x200, - # so we will perhaps read one - # page more than needed, but - # never overwrite INITSEG - # because destination is a - # minimum one page below source - jb do_move - -end_move: -# then we load the segment descriptors - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds - -# Check whether we need to be downward compatible with version <=201 - cmpl $0, cmd_line_ptr - jne end_move_self # loader uses version >=202 features - cmpb $0x20, type_of_loader - je end_move_self # bootsect loader, we know of it - -# Boot loader doesnt support boot protocol version 2.02. -# If we have our code not at 0x90000, we need to move it there now. -# We also then need to move the params behind it (commandline) -# Because we would overwrite the code on the current IP, we move -# it in two steps, jumping high after the first one. - movw %cs, %ax - cmpw $SETUPSEG, %ax - je end_move_self - - cli # make sure we really have - # interrupts disabled ! - # because after this the stack - # should not be used - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ss, %dx - cmpw %ax, %dx - jb move_self_1 - - addw $INITSEG, %dx - subw %ax, %dx # this will go into %ss after - # the move -move_self_1: - movw %ax, %ds - movw $INITSEG, %ax # real INITSEG - movw %ax, %es - movw %cs:setup_move_size, %cx - std # we have to move up, so we use - # direction down because the - # areas may overlap - movw %cx, %di - decw %di - movw %di, %si - subw $move_self_here+0x200, %cx - rep - movsb - ljmp $SETUPSEG, $move_self_here - -move_self_here: - movw $move_self_here+0x200, %cx - rep - movsb - movw $SETUPSEG, %ax - movw %ax, %ds - movw %dx, %ss -end_move_self: # now we are at the right place - -# -# Enable A20. This is at the very best an annoying procedure. -# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin. -# AMD Elan bug fix by Robert Schwebel. -# - -#if defined(CONFIG_X86_ELAN) - movb $0x02, %al # alternate A20 gate - outb %al, $0x92 # this works on SC410/SC520 -a20_elan_wait: - call a20_test - jz a20_elan_wait - jmp a20_done -#endif - - -A20_TEST_LOOPS = 32 # Iterations per wait -A20_ENABLE_LOOPS = 255 # Total loops to try - - -#ifndef CONFIG_X86_VOYAGER -a20_try_loop: - - # First, see if we are on a system with no A20 gate. -a20_none: - call a20_test - jnz a20_done - - # Next, try the BIOS (INT 0x15, AX=0x2401) -a20_bios: - movw $0x2401, %ax - pushfl # Be paranoid about flags - int $0x15 - popfl - - call a20_test - jnz a20_done - - # Try enabling A20 through the keyboard controller -#endif /* CONFIG_X86_VOYAGER */ -a20_kbc: - call empty_8042 - -#ifndef CONFIG_X86_VOYAGER - call a20_test # Just in case the BIOS worked - jnz a20_done # but had a delayed reaction. -#endif - - movb $0xD1, %al # command write - outb %al, $0x64 - call empty_8042 - - movb $0xDF, %al # A20 on - outb %al, $0x60 - call empty_8042 - -#ifndef CONFIG_X86_VOYAGER - # Wait until a20 really *is* enabled; it can take a fair amount of - # time on certain systems; Toshiba Tecras are known to have this - # problem. -a20_kbc_wait: - xorw %cx, %cx -a20_kbc_wait_loop: - call a20_test - jnz a20_done - loop a20_kbc_wait_loop - - # Final attempt: use "configuration port A" -a20_fast: - inb $0x92, %al # Configuration Port A - orb $0x02, %al # "fast A20" version - andb $0xFE, %al # don't accidentally reset - outb %al, $0x92 - - # Wait for configuration port A to take effect -a20_fast_wait: - xorw %cx, %cx -a20_fast_wait_loop: - call a20_test - jnz a20_done - loop a20_fast_wait_loop - - # A20 is still not responding. Try frobbing it again. - # - decb (a20_tries) - jnz a20_try_loop - - movw $a20_err_msg, %si - call prtstr - -a20_die: - hlt - jmp a20_die - -a20_tries: - .byte A20_ENABLE_LOOPS - -a20_err_msg: - .ascii "linux: fatal error: A20 gate not responding!" - .byte 13, 10, 0 - - # If we get here, all is good -a20_done: - -#endif /* CONFIG_X86_VOYAGER */ -# set up gdt and idt and 32bit start address - lidt idt_48 # load idt with 0,0 - xorl %eax, %eax # Compute gdt_base - movw %ds, %ax # (Convert %ds:gdt to a linear ptr) - shll $4, %eax - addl %eax, code32 - addl $gdt, %eax - movl %eax, (gdt_48+2) - lgdt gdt_48 # load gdt with whatever is - # appropriate - -# make sure any possible coprocessor is properly reset.. - xorw %ax, %ax - outb %al, $0xf0 - call delay - - outb %al, $0xf1 - call delay - -# well, that went ok, I hope. Now we mask all interrupts - the rest -# is done in init_IRQ(). - movb $0xFF, %al # mask all interrupts for now - outb %al, $0xA1 - call delay - - movb $0xFB, %al # mask all irq's but irq2 which - outb %al, $0x21 # is cascaded - -# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't -# need no steenking BIOS anyway (except for the initial loading :-). -# The BIOS-routine wants lots of unnecessary data, and it's less -# "interesting" anyway. This is how REAL programmers do it. -# -# Well, now's the time to actually move into protected mode. To make -# things as simple as possible, we do no register set-up or anything, -# we let the gnu-compiled 32-bit programs do that. We just jump to -# absolute address 0x1000 (or the loader supplied one), -# in 32-bit protected mode. -# -# Note that the short jump isn't strictly needed, although there are -# reasons why it might be a good idea. It won't hurt in any case. - movw $1, %ax # protected mode (PE) bit - lmsw %ax # This is it! - jmp flush_instr - -flush_instr: - xorw %bx, %bx # Flag to indicate a boot - xorl %esi, %esi # Pointer to real-mode code - movw %cs, %si - subw $DELTA_INITSEG, %si - shll $4, %esi # Convert to 32-bit pointer - -# jump to startup_32 in arch/i386/boot/compressed/head.S -# -# NOTE: For high loaded big kernels we need a -# jmpi 0x100000,__BOOT_CS -# -# but we yet haven't reloaded the CS register, so the default size -# of the target offset still is 16 bit. -# However, using an operand prefix (0x66), the CPU will properly -# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference -# Manual, Mixing 16-bit and 32-bit code, page 16-6) - - .byte 0x66, 0xea # prefix + jmpi-opcode -code32: .long startup_32 # will be set to %cs+startup_32 - .word __BOOT_CS -.code32 -startup_32: - movl $(__BOOT_DS), %eax - movl %eax, %ds - movl %eax, %es - movl %eax, %fs - movl %eax, %gs - movl %eax, %ss - - xorl %eax, %eax -1: incl %eax # check that A20 really IS enabled - movl %eax, 0x00000000 # loop forever if it isn't - cmpl %eax, 0x00100000 - je 1b - - # Jump to the 32bit entry point - jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi) -.code16 - -# Here's a bunch of information about your current kernel.. -kernel_version: .ascii UTS_RELEASE - .ascii " (" - .ascii LINUX_COMPILE_BY - .ascii "@" - .ascii LINUX_COMPILE_HOST - .ascii ") " - .ascii UTS_VERSION - .byte 0 - -# This is the default real mode switch routine. -# to be called just before protected mode transition -default_switch: - cli # no interrupts allowed ! - movb $0x80, %al # disable NMI for bootup - # sequence - outb %al, $0x70 - lret - - -#ifndef CONFIG_X86_VOYAGER -# This routine tests whether or not A20 is enabled. If so, it -# exits with zf = 0. -# -# The memory address used, 0x200, is the int $0x80 vector, which -# should be safe. - -A20_TEST_ADDR = 4*0x80 - -a20_test: - pushw %cx - pushw %ax - xorw %cx, %cx - movw %cx, %fs # Low memory - decw %cx - movw %cx, %gs # High memory area - movw $A20_TEST_LOOPS, %cx - movw %fs:(A20_TEST_ADDR), %ax - pushw %ax -a20_test_wait: - incw %ax - movw %ax, %fs:(A20_TEST_ADDR) - call delay # Serialize and make delay constant - cmpw %gs:(A20_TEST_ADDR+0x10), %ax - loope a20_test_wait - - popw %fs:(A20_TEST_ADDR) - popw %ax - popw %cx - ret - -#endif /* CONFIG_X86_VOYAGER */ - -# This routine checks that the keyboard command queue is empty -# (after emptying the output buffers) -# -# Some machines have delusions that the keyboard buffer is always full -# with no keyboard attached... -# -# If there is no keyboard controller, we will usually get 0xff -# to all the reads. With each IO taking a microsecond and -# a timeout of 100,000 iterations, this can take about half a -# second ("delay" == outb to port 0x80). That should be ok, -# and should also be plenty of time for a real keyboard controller -# to empty. -# - -empty_8042: - pushl %ecx - movl $100000, %ecx - -empty_8042_loop: - decl %ecx - jz empty_8042_end_loop - - call delay - - inb $0x64, %al # 8042 status port - testb $1, %al # output buffer? - jz no_output - - call delay - inb $0x60, %al # read it - jmp empty_8042_loop - -no_output: - testb $2, %al # is input buffer full? - jnz empty_8042_loop # yes - loop -empty_8042_end_loop: - popl %ecx - ret - -# Read the cmos clock. Return the seconds in al -gettime: - pushw %cx - movb $0x02, %ah - int $0x1a - movb %dh, %al # %dh contains the seconds - andb $0x0f, %al - movb %dh, %ah - movb $0x04, %cl - shrb %cl, %ah - aad - popw %cx - ret - -# Delay is needed after doing I/O -delay: - outb %al,$0x80 - ret - -# Descriptor tables -# -# NOTE: The intel manual says gdt should be sixteen bytes aligned for -# efficiency reasons. However, there are machines which are known not -# to boot with misaligned GDTs, so alter this at your peril! If you alter -# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two -# empty GDT entries (one for NULL and one reserved). -# -# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is -# true for the Voyager Quad CPU card which will not boot without -# This directive. 16 byte aligment is recommended by intel. -# - .align 16 -gdt: - .fill GDT_ENTRY_BOOT_CS,8,0 - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9A00 # code read/exec - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) -gdt_end: - .align 4 - - .word 0 # alignment byte -idt_48: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - - .word 0 # alignment byte -gdt_48: - .word gdt_end - gdt - 1 # gdt limit - .word 0, 0 # gdt base (filled in later) - -# Include video setup & detection code - -#include "video.S" - -# Setup signature -- must be last -setup_sig1: .word SIG1 -setup_sig2: .word SIG2 - -# After this point, there is some free space which is used by the video mode -# handling code to store the temporary mode table (not used by the kernel). - -modelist: - -.text -endtext: -.data -enddata: -.bss -endbss: diff --git a/arch/i386/boot/setup.ld b/arch/i386/boot/setup.ld new file mode 100644 index 000000000000..df9234b3a5e0 --- /dev/null +++ b/arch/i386/boot/setup.ld @@ -0,0 +1,54 @@ +/* + * setup.ld + * + * Linker script for the i386 setup code + */ +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(_start) + +SECTIONS +{ + . = 0; + .bstext : { *(.bstext) } + .bsdata : { *(.bsdata) } + + . = 497; + .header : { *(.header) } + .inittext : { *(.inittext) } + .initdata : { *(.initdata) } + .text : { *(.text*) } + + . = ALIGN(16); + .rodata : { *(.rodata*) } + + .videocards : { + video_cards = .; + *(.videocards) + video_cards_end = .; + } + + . = ALIGN(16); + .data : { *(.data*) } + + .signature : { + setup_sig = .; + LONG(0x5a5aaa55) + } + + + . = ALIGN(16); + .bss : + { + __bss_start = .; + *(.bss) + __bss_end = .; + } + . = ALIGN(16); + _end = .; + + /DISCARD/ : { *(.note*) } + + . = ASSERT(_end <= 0x8000, "Setup too big!"); + . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!"); +} diff --git a/arch/i386/boot/string.c b/arch/i386/boot/string.c new file mode 100644 index 000000000000..481a22097781 --- /dev/null +++ b/arch/i386/boot/string.c @@ -0,0 +1,52 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/string.c + * + * Very basic string functions + */ + +#include "boot.h" + +int strcmp(const char *str1, const char *str2) +{ + const unsigned char *s1 = (const unsigned char *)str1; + const unsigned char *s2 = (const unsigned char *)str2; + int delta = 0; + + while (*s1 || *s2) { + delta = *s2 - *s1; + if (delta) + return delta; + s1++; + s2++; + } + return 0; +} + +size_t strnlen(const char *s, size_t maxlen) +{ + const char *es = s; + while (*es && maxlen) { + es++; + maxlen--; + } + + return (es - s); +} + +unsigned int atou(const char *s) +{ + unsigned int i = 0; + while (isdigit(*s)) + i = i * 10 + (*s++ - '0'); + return i; +} diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c index 05798419a6a9..886f47d8a488 100644 --- a/arch/i386/boot/tools/build.c +++ b/arch/i386/boot/tools/build.c @@ -1,13 +1,12 @@ /* * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 1997 Martin Mares + * Copyright (C) 2007 H. Peter Anvin */ /* * This file builds a disk-image from three different files: * - * - bootsect: compatibility mbr which prints an error message if - * someone tries to boot the kernel directly. * - setup: 8086 machine code, sets up system parm * - system: 80386 code for actual system * @@ -21,6 +20,7 @@ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 * Cross compiling fixes by Gertjan van Wingerde, July 1996 * Rewritten by Martin Mares, April 1997 + * Substantially overhauled by H. Peter Anvin, April 2007 */ #include <stdio.h> @@ -32,23 +32,25 @@ #include <sys/sysmacros.h> #include <unistd.h> #include <fcntl.h> +#include <sys/mman.h> #include <asm/boot.h> -typedef unsigned char byte; -typedef unsigned short word; -typedef unsigned long u32; +typedef unsigned char u8; +typedef unsigned short u16; +typedef unsigned long u32; #define DEFAULT_MAJOR_ROOT 0 #define DEFAULT_MINOR_ROOT 0 -/* Minimal number of setup sectors (see also bootsect.S) */ -#define SETUP_SECTS 4 +/* Minimal number of setup sectors */ +#define SETUP_SECT_MIN 5 +#define SETUP_SECT_MAX 64 -byte buf[1024]; -int fd; +/* This must be large enough to hold the entire setup */ +u8 buf[SETUP_SECT_MAX*512]; int is_big_kernel; -void die(const char * str, ...) +static void die(const char * str, ...) { va_list args; va_start(args, str); @@ -57,15 +59,9 @@ void die(const char * str, ...) exit(1); } -void file_open(const char *name) +static void usage(void) { - if ((fd = open(name, O_RDONLY, 0)) < 0) - die("Unable to open `%s': %m", name); -} - -void usage(void) -{ - die("Usage: build [-b] bootsect setup system [rootdev] [> image]"); + die("Usage: build [-b] setup system [rootdev] [> image]"); } int main(int argc, char ** argv) @@ -73,27 +69,30 @@ int main(int argc, char ** argv) unsigned int i, sz, setup_sectors; int c; u32 sys_size; - byte major_root, minor_root; + u8 major_root, minor_root; struct stat sb; + FILE *file; + int fd; + void *kernel; if (argc > 2 && !strcmp(argv[1], "-b")) { is_big_kernel = 1; argc--, argv++; } - if ((argc < 4) || (argc > 5)) + if ((argc < 3) || (argc > 4)) usage(); - if (argc > 4) { - if (!strcmp(argv[4], "CURRENT")) { + if (argc > 3) { + if (!strcmp(argv[3], "CURRENT")) { if (stat("/", &sb)) { perror("/"); die("Couldn't stat /"); } major_root = major(sb.st_dev); minor_root = minor(sb.st_dev); - } else if (strcmp(argv[4], "FLOPPY")) { - if (stat(argv[4], &sb)) { - perror(argv[4]); + } else if (strcmp(argv[3], "FLOPPY")) { + if (stat(argv[3], &sb)) { + perror(argv[3]); die("Couldn't stat root device."); } major_root = major(sb.st_rdev); @@ -108,79 +107,62 @@ int main(int argc, char ** argv) } fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); - file_open(argv[1]); - i = read(fd, buf, sizeof(buf)); - fprintf(stderr,"Boot sector %d bytes.\n",i); - if (i != 512) - die("Boot block must be exactly 512 bytes"); + /* Copy the setup code */ + file = fopen(argv[1], "r"); + if (!file) + die("Unable to open `%s': %m", argv[1]); + c = fread(buf, 1, sizeof(buf), file); + if (ferror(file)) + die("read-error on `setup'"); + if (c < 1024) + die("The setup must be at least 1024 bytes"); if (buf[510] != 0x55 || buf[511] != 0xaa) die("Boot block hasn't got boot flag (0xAA55)"); + fclose(file); + + /* Pad unused space with zeros */ + setup_sectors = (c + 511) / 512; + if (setup_sectors < SETUP_SECT_MIN) + setup_sectors = SETUP_SECT_MIN; + i = setup_sectors*512; + memset(buf+c, 0, i-c); + + /* Set the default root device */ buf[508] = minor_root; buf[509] = major_root; - if (write(1, buf, 512) != 512) - die("Write call failed"); - close (fd); - - file_open(argv[2]); /* Copy the setup code */ - for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c ) - if (write(1, buf, c) != c) - die("Write call failed"); - if (c != 0) - die("read-error on `setup'"); - close (fd); - - setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */ - /* for compatibility with ancient versions of LILO. */ - if (setup_sectors < SETUP_SECTS) - setup_sectors = SETUP_SECTS; - fprintf(stderr, "Setup is %d bytes.\n", i); - memset(buf, 0, sizeof(buf)); - while (i < setup_sectors * 512) { - c = setup_sectors * 512 - i; - if (c > sizeof(buf)) - c = sizeof(buf); - if (write(1, buf, c) != c) - die("Write call failed"); - i += c; - } - file_open(argv[3]); - if (fstat (fd, &sb)) - die("Unable to stat `%s': %m", argv[3]); + fprintf(stderr, "Setup is %d bytes (padded to %d bytes).\n", c, i); + + /* Open and stat the kernel file */ + fd = open(argv[2], O_RDONLY); + if (fd < 0) + die("Unable to open `%s': %m", argv[2]); + if (fstat(fd, &sb)) + die("Unable to stat `%s': %m", argv[2]); sz = sb.st_size; - fprintf (stderr, "System is %d kB\n", sz/1024); + fprintf (stderr, "System is %d kB\n", (sz+1023)/1024); + kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0); + if (kernel == MAP_FAILED) + die("Unable to mmap '%s': %m", argv[2]); sys_size = (sz + 15) / 16; if (!is_big_kernel && sys_size > DEF_SYSSIZE) die("System is too big. Try using bzImage or modules."); - while (sz > 0) { - int l, n; - - l = (sz > sizeof(buf)) ? sizeof(buf) : sz; - if ((n=read(fd, buf, l)) != l) { - if (n < 0) - die("Error reading %s: %m", argv[3]); - else - die("%s: Unexpected EOF", argv[3]); - } - if (write(1, buf, l) != l) - die("Write failed"); - sz -= l; - } + + /* Patch the setup code with the appropriate size parameters */ + buf[0x1f1] = setup_sectors-1; + buf[0x1f4] = sys_size; + buf[0x1f5] = sys_size >> 8; + buf[0x1f6] = sys_size >> 16; + buf[0x1f7] = sys_size >> 24; + + if (fwrite(buf, 1, i, stdout) != i) + die("Writing setup failed"); + + /* Copy the kernel code */ + if (fwrite(kernel, 1, sz, stdout) != sz) + die("Writing kernel failed"); close(fd); - if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */ - die("Output: seek failed"); - buf[0] = setup_sectors; - if (write(1, buf, 1) != 1) - die("Write of setup sector count failed"); - if (lseek(1, 500, SEEK_SET) != 500) - die("Output: seek failed"); - buf[0] = (sys_size & 0xff); - buf[1] = ((sys_size >> 8) & 0xff); - buf[2] = ((sys_size >> 16) & 0xff); - buf[3] = ((sys_size >> 24) & 0xff); - if (write(1, buf, 4) != 4) - die("Write of image length failed"); - - return 0; /* Everything is OK */ + /* Everything is OK */ + return 0; } diff --git a/arch/i386/boot/tty.c b/arch/i386/boot/tty.c new file mode 100644 index 000000000000..a8db78736b02 --- /dev/null +++ b/arch/i386/boot/tty.c @@ -0,0 +1,112 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/tty.c + * + * Very simple screen I/O + * XXX: Probably should add very simple serial I/O? + */ + +#include "boot.h" + +/* + * These functions are in .inittext so they can be used to signal + * error during initialization. + */ + +void __attribute__((section(".inittext"))) putchar(int ch) +{ + unsigned char c = ch; + + if (c == '\n') + putchar('\r'); /* \n -> \r\n */ + + /* int $0x10 is known to have bugs involving touching registers + it shouldn't. Be extra conservative... */ + asm volatile("pushal; int $0x10; popal" + : : "b" (0x0007), "c" (0x0001), "a" (0x0e00|ch)); +} + +void __attribute__((section(".inittext"))) puts(const char *str) +{ + int n = 0; + while (*str) { + putchar(*str++); + n++; + } +} + +/* + * Read the CMOS clock through the BIOS, and return the + * seconds in BCD. + */ + +static u8 gettime(void) +{ + u16 ax = 0x0200; + u16 cx, dx; + + asm("int $0x1a" + : "+a" (ax), "=c" (cx), "=d" (dx) + : : "ebx", "esi", "edi"); + + return dx >> 8; +} + +/* + * Read from the keyboard + */ +int getchar(void) +{ + u16 ax = 0; + asm("int $0x16" : "+a" (ax)); + + return ax & 0xff; +} + +static int kbd_pending(void) +{ + u8 pending; + asm("int $0x16; setnz %0" + : "=rm" (pending) + : "a" (0x0100)); + return pending; +} + +void kbd_flush(void) +{ + for (;;) { + if (!kbd_pending()) + break; + getchar(); + } +} + +int getchar_timeout(void) +{ + int cnt = 30; + int t0, t1; + + t0 = gettime(); + + while (cnt) { + if (kbd_pending()) + return getchar(); + + t1 = gettime(); + if (t0 != t1) { + cnt--; + t0 = t1; + } + } + + return 0; /* Timeout! */ +} diff --git a/arch/i386/boot/version.c b/arch/i386/boot/version.c new file mode 100644 index 000000000000..c61462f7d9a7 --- /dev/null +++ b/arch/i386/boot/version.c @@ -0,0 +1,23 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/version.c + * + * Kernel version string + */ + +#include "boot.h" +#include <linux/utsrelease.h> +#include <linux/compile.h> + +const char kernel_version[] = + UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") " + UTS_VERSION; diff --git a/arch/i386/boot/vesa.h b/arch/i386/boot/vesa.h new file mode 100644 index 000000000000..ff5b73cd406f --- /dev/null +++ b/arch/i386/boot/vesa.h @@ -0,0 +1,79 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright 1999-2007 H. Peter Anvin - All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, Inc., 53 Temple Place Ste 330, + * Boston MA 02111-1307, USA; either version 2 of the License, or + * (at your option) any later version; incorporated herein by reference. + * + * ----------------------------------------------------------------------- */ + +#ifndef BOOT_VESA_H +#define BOOT_VESA_H + +typedef struct { + u16 off, seg; +} far_ptr; + +/* VESA General Information table */ +struct vesa_general_info { + u32 signature; /* 0 Magic number = "VESA" */ + u16 version; /* 4 */ + far_ptr vendor_string; /* 6 */ + u32 capabilities; /* 10 */ + far_ptr video_mode_ptr; /* 14 */ + u16 total_memory; /* 18 */ + + u16 oem_software_rev; /* 20 */ + far_ptr oem_vendor_name_ptr; /* 22 */ + far_ptr oem_product_name_ptr; /* 26 */ + far_ptr oem_product_rev_ptr; /* 30 */ + + u8 reserved[222]; /* 34 */ + u8 oem_data[256]; /* 256 */ +} __attribute__ ((packed)); + +#define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24)) +#define VBE2_MAGIC ('V' + ('B' << 8) + ('E' << 16) + ('2' << 24)) + +struct vesa_mode_info { + u16 mode_attr; /* 0 */ + u8 win_attr[2]; /* 2 */ + u16 win_grain; /* 4 */ + u16 win_size; /* 6 */ + u16 win_seg[2]; /* 8 */ + far_ptr win_scheme; /* 12 */ + u16 logical_scan; /* 16 */ + + u16 h_res; /* 18 */ + u16 v_res; /* 20 */ + u8 char_width; /* 22 */ + u8 char_height; /* 23 */ + u8 memory_planes; /* 24 */ + u8 bpp; /* 25 */ + u8 banks; /* 26 */ + u8 memory_layout; /* 27 */ + u8 bank_size; /* 28 */ + u8 image_planes; /* 29 */ + u8 page_function; /* 30 */ + + u8 rmask; /* 31 */ + u8 rpos; /* 32 */ + u8 gmask; /* 33 */ + u8 gpos; /* 34 */ + u8 bmask; /* 35 */ + u8 bpos; /* 36 */ + u8 resv_mask; /* 37 */ + u8 resv_pos; /* 38 */ + u8 dcm_info; /* 39 */ + + u32 lfb_ptr; /* 40 Linear frame buffer address */ + u32 offscreen_ptr; /* 44 Offscreen memory address */ + u16 offscreen_size; /* 48 */ + + u8 reserved[206]; /* 50 */ +} __attribute__ ((packed)); + +#endif /* LIB_SYS_VESA_H */ diff --git a/arch/i386/boot/video-bios.c b/arch/i386/boot/video-bios.c new file mode 100644 index 000000000000..afea46c500cc --- /dev/null +++ b/arch/i386/boot/video-bios.c @@ -0,0 +1,125 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video-bios.c + * + * Standard video BIOS modes + * + * We have two options for this; silent and scanned. + */ + +#include "boot.h" +#include "video.h" + +__videocard video_bios; + +/* Set a conventional BIOS mode */ +static int set_bios_mode(u8 mode); + +static int bios_set_mode(struct mode_info *mi) +{ + return set_bios_mode(mi->mode - VIDEO_FIRST_BIOS); +} + +static int set_bios_mode(u8 mode) +{ + u16 ax; + u8 new_mode; + + ax = mode; /* AH=0x00 Set Video Mode */ + asm volatile(INT10 + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); + + ax = 0x0f00; /* Get Current Video Mode */ + asm volatile(INT10 + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); + + do_restore = 1; /* Assume video contents was lost */ + new_mode = ax & 0x7f; /* Not all BIOSes are clean with the top bit */ + + if (new_mode == mode) + return 0; /* Mode change OK */ + + if (new_mode != boot_params.screen_info.orig_video_mode) { + /* Mode setting failed, but we didn't end up where we + started. That's bad. Try to revert to the original + video mode. */ + ax = boot_params.screen_info.orig_video_mode; + asm volatile(INT10 + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); + } + return -1; +} + +static int bios_probe(void) +{ + u8 mode; + u8 saved_mode = boot_params.screen_info.orig_video_mode; + u16 crtc; + struct mode_info *mi; + int nmodes = 0; + + if (adapter != ADAPTER_EGA && adapter != ADAPTER_VGA) + return 0; + + set_fs(0); + crtc = vga_crtc(); + + video_bios.modes = GET_HEAP(struct mode_info, 0); + + for (mode = 0x14; mode <= 0x7f; mode++) { + if (heap_free() < sizeof(struct mode_info)) + break; + + if (mode_defined(VIDEO_FIRST_BIOS+mode)) + continue; + + if (set_bios_mode(mode)) + continue; + + /* Try to verify that it's a text mode. */ + + /* Attribute Controller: make graphics controller disabled */ + if (in_idx(0x3c0, 0x10) & 0x01) + continue; + + /* Graphics Controller: verify Alpha addressing enabled */ + if (in_idx(0x3ce, 0x06) & 0x01) + continue; + + /* CRTC cursor location low should be zero(?) */ + if (in_idx(crtc, 0x0f)) + continue; + + mi = GET_HEAP(struct mode_info, 1); + mi->mode = VIDEO_FIRST_BIOS+mode; + mi->x = rdfs16(0x44a); + mi->y = rdfs8(0x484)+1; + nmodes++; + } + + set_bios_mode(saved_mode); + + return nmodes; +} + +__videocard video_bios = +{ + .card_name = "BIOS (scanned)", + .probe = bios_probe, + .set_mode = bios_set_mode, + .unsafe = 1, + .xmode_first = VIDEO_FIRST_BIOS, + .xmode_n = 0x80, +}; diff --git a/arch/i386/boot/video-vesa.c b/arch/i386/boot/video-vesa.c new file mode 100644 index 000000000000..e6aa9eb8d93a --- /dev/null +++ b/arch/i386/boot/video-vesa.c @@ -0,0 +1,284 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video-vesa.c + * + * VESA text modes + */ + +#include "boot.h" +#include "video.h" +#include "vesa.h" + +/* VESA information */ +static struct vesa_general_info vginfo; +static struct vesa_mode_info vminfo; + +__videocard video_vesa; + +static void vesa_store_mode_params_graphics(void); + +static int vesa_probe(void) +{ +#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID) + u16 ax; + u16 mode; + addr_t mode_ptr; + struct mode_info *mi; + int nmodes = 0; + + video_vesa.modes = GET_HEAP(struct mode_info, 0); + + vginfo.signature = VBE2_MAGIC; + + /* Optimistically assume a VESA BIOS is register-clean... */ + ax = 0x4f00; + asm("int $0x10" : "+a" (ax), "=m" (vginfo) : "D" (&vginfo)); + + if (ax != 0x004f || + vginfo.signature != VESA_MAGIC || + vginfo.version < 0x0102) + return 0; /* Not present */ +#endif /* CONFIG_VIDEO_VESA || CONFIG_FIRMWARE_EDID */ +#ifdef CONFIG_VIDEO_VESA + set_fs(vginfo.video_mode_ptr.seg); + mode_ptr = vginfo.video_mode_ptr.off; + + while ((mode = rdfs16(mode_ptr)) != 0xffff) { + mode_ptr += 2; + + if (heap_free() < sizeof(struct mode_info)) + break; /* Heap full, can't save mode info */ + + if (mode & ~0x1ff) + continue; + + memset(&vminfo, 0, sizeof vminfo); /* Just in case... */ + + ax = 0x4f01; + asm("int $0x10" + : "+a" (ax), "=m" (vminfo) + : "c" (mode), "D" (&vminfo)); + + if (ax != 0x004f) + continue; + + if ((vminfo.mode_attr & 0x15) == 0x05) { + /* Text Mode, TTY BIOS supported, + supported by hardware */ + mi = GET_HEAP(struct mode_info, 1); + mi->mode = mode + VIDEO_FIRST_VESA; + mi->x = vminfo.h_res; + mi->y = vminfo.v_res; + nmodes++; + } else if ((vminfo.mode_attr & 0x99) == 0x99) { +#ifdef CONFIG_FB + /* Graphics mode, color, linear frame buffer + supported -- register the mode but hide from + the menu. Only do this if framebuffer is + configured, however, otherwise the user will + be left without a screen. */ + mi = GET_HEAP(struct mode_info, 1); + mi->mode = mode + VIDEO_FIRST_VESA; + mi->x = mi->y = 0; + nmodes++; +#endif + } + } + + return nmodes; +#else + return 0; +#endif /* CONFIG_VIDEO_VESA */ +} + +static int vesa_set_mode(struct mode_info *mode) +{ + u16 ax; + int is_graphic; + u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA; + + memset(&vminfo, 0, sizeof vminfo); /* Just in case... */ + + ax = 0x4f01; + asm("int $0x10" + : "+a" (ax), "=m" (vminfo) + : "c" (vesa_mode), "D" (&vminfo)); + + if (ax != 0x004f) + return -1; + + if ((vminfo.mode_attr & 0x15) == 0x05) { + /* It's a supported text mode */ + is_graphic = 0; + } else if ((vminfo.mode_attr & 0x99) == 0x99) { + /* It's a graphics mode with linear frame buffer */ + is_graphic = 1; + vesa_mode |= 0x4000; /* Request linear frame buffer */ + } else { + return -1; /* Invalid mode */ + } + + + ax = 0x4f02; + asm volatile("int $0x10" + : "+a" (ax) + : "b" (vesa_mode), "D" (0)); + + if (ax != 0x004f) + return -1; + + graphic_mode = is_graphic; + if (!is_graphic) { + /* Text mode */ + force_x = mode->x; + force_y = mode->y; + do_restore = 1; + } else { + /* Graphics mode */ + vesa_store_mode_params_graphics(); + } + + return 0; +} + + +/* Switch DAC to 8-bit mode */ +static void vesa_dac_set_8bits(void) +{ + u8 dac_size = 6; + + /* If possible, switch the DAC to 8-bit mode */ + if (vginfo.capabilities & 1) { + u16 ax, bx; + + ax = 0x4f08; + bx = 0x0800; + asm volatile(INT10 + : "+a" (ax), "+b" (bx) + : : "ecx", "edx", "esi", "edi"); + + if (ax == 0x004f) + dac_size = bx >> 8; + } + + /* Set the color sizes to the DAC size, and offsets to 0 */ + boot_params.screen_info.red_size = dac_size; + boot_params.screen_info.green_size = dac_size; + boot_params.screen_info.blue_size = dac_size; + boot_params.screen_info.rsvd_size = dac_size; + + boot_params.screen_info.red_pos = 0; + boot_params.screen_info.green_pos = 0; + boot_params.screen_info.blue_pos = 0; + boot_params.screen_info.rsvd_pos = 0; +} + +/* Save the VESA protected mode info */ +static void vesa_store_pm_info(void) +{ + u16 ax, bx, di, es; + + ax = 0x4f0a; + bx = di = 0; + asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es" + : "=d" (es), "+a" (ax), "+b" (bx), "+D" (di) + : : "ecx", "esi"); + + if (ax != 0x004f) + return; + + boot_params.screen_info.vesapm_seg = es; + boot_params.screen_info.vesapm_off = di; +} + +/* + * Save video mode parameters for graphics mode + */ +static void vesa_store_mode_params_graphics(void) +{ + /* Tell the kernel we're in VESA graphics mode */ + boot_params.screen_info.orig_video_isVGA = 0x23; + + /* Mode parameters */ + boot_params.screen_info.vesa_attributes = vminfo.mode_attr; + boot_params.screen_info.lfb_linelength = vminfo.logical_scan; + boot_params.screen_info.lfb_width = vminfo.h_res; + boot_params.screen_info.lfb_height = vminfo.v_res; + boot_params.screen_info.lfb_depth = vminfo.bpp; + boot_params.screen_info.pages = vminfo.image_planes; + boot_params.screen_info.lfb_base = vminfo.lfb_ptr; + memcpy(&boot_params.screen_info.red_size, + &vminfo.rmask, 8); + + /* General parameters */ + boot_params.screen_info.lfb_size = vginfo.total_memory; + + if (vminfo.bpp <= 8) + vesa_dac_set_8bits(); + + vesa_store_pm_info(); +} + +/* + * Save EDID information for the kernel; this is invoked, separately, + * after mode-setting. + */ +void vesa_store_edid(void) +{ +#ifdef CONFIG_FIRMWARE_EDID + u16 ax, bx, cx, dx, di; + + /* Apparently used as a nonsense token... */ + memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info); + + if (vginfo.version < 0x0200) + return; /* EDID requires VBE 2.0+ */ + + ax = 0x4f15; /* VBE DDC */ + bx = 0x0000; /* Report DDC capabilities */ + cx = 0; /* Controller 0 */ + di = 0; /* ES:DI must be 0 by spec */ + + /* Note: The VBE DDC spec is different from the main VESA spec; + we genuinely have to assume all registers are destroyed here. */ + + asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es" + : "+a" (ax), "+b" (bx) + : "c" (cx), "D" (di) + : "esi"); + + if (ax != 0x004f) + return; /* No EDID */ + + /* BH = time in seconds to transfer EDD information */ + /* BL = DDC level supported */ + + ax = 0x4f15; /* VBE DDC */ + bx = 0x0001; /* Read EDID */ + cx = 0; /* Controller 0 */ + dx = 0; /* EDID block number */ + di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */ + asm(INT10 + : "+a" (ax), "+b" (bx), "+d" (dx) + : "c" (cx), "D" (di) + : "esi"); +#endif /* CONFIG_FIRMWARE_EDID */ +} + +__videocard video_vesa = +{ + .card_name = "VESA", + .probe = vesa_probe, + .set_mode = vesa_set_mode, + .xmode_first = VIDEO_FIRST_VESA, + .xmode_n = 0x200, +}; diff --git a/arch/i386/boot/video-vga.c b/arch/i386/boot/video-vga.c new file mode 100644 index 000000000000..700d09a9c9b3 --- /dev/null +++ b/arch/i386/boot/video-vga.c @@ -0,0 +1,260 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video-vga.c + * + * Common all-VGA modes + */ + +#include "boot.h" +#include "video.h" + +static struct mode_info vga_modes[] = { + { VIDEO_80x25, 80, 25 }, + { VIDEO_8POINT, 80, 50 }, + { VIDEO_80x43, 80, 43 }, + { VIDEO_80x28, 80, 28 }, + { VIDEO_80x30, 80, 30 }, + { VIDEO_80x34, 80, 34 }, + { VIDEO_80x60, 80, 60 }, +}; + +static struct mode_info ega_modes[] = { + { VIDEO_80x25, 80, 25 }, + { VIDEO_8POINT, 80, 43 }, +}; + +static struct mode_info cga_modes[] = { + { VIDEO_80x25, 80, 25 }, +}; + +__videocard video_vga; + +/* Set basic 80x25 mode */ +static u8 vga_set_basic_mode(void) +{ + u16 ax; + u8 rows; + u8 mode; + +#ifdef CONFIG_VIDEO_400_HACK + if (adapter >= ADAPTER_VGA) { + asm(INT10 + : : "a" (0x1202), "b" (0x0030) + : "ecx", "edx", "esi", "edi"); + } +#endif + + ax = 0x0f00; + asm(INT10 + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); + + mode = (u8)ax; + + set_fs(0); + rows = rdfs8(0x484); /* rows minus one */ + +#ifndef CONFIG_VIDEO_400_HACK + if ((ax == 0x5003 || ax == 0x5007) && + (rows == 0 || rows == 24)) + return mode; +#endif + + if (mode != 3 && mode != 7) + mode = 3; + + /* Set the mode */ + asm volatile(INT10 + : : "a" (mode) + : "ebx", "ecx", "edx", "esi", "edi"); + do_restore = 1; + return mode; +} + +static void vga_set_8font(void) +{ + /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */ + + /* Set 8x8 font */ + asm volatile(INT10 : : "a" (0x1112), "b" (0)); + + /* Use alternate print screen */ + asm volatile(INT10 : : "a" (0x1200), "b" (0x20)); + + /* Turn off cursor emulation */ + asm volatile(INT10 : : "a" (0x1201), "b" (0x34)); + + /* Cursor is scan lines 6-7 */ + asm volatile(INT10 : : "a" (0x0100), "c" (0x0607)); +} + +static void vga_set_14font(void) +{ + /* Set 9x14 font - 80x28 on VGA */ + + /* Set 9x14 font */ + asm volatile(INT10 : : "a" (0x1111), "b" (0)); + + /* Turn off cursor emulation */ + asm volatile(INT10 : : "a" (0x1201), "b" (0x34)); + + /* Cursor is scan lines 11-12 */ + asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c)); +} + +static void vga_set_80x43(void) +{ + /* Set 80x43 mode on VGA (not EGA) */ + + /* Set 350 scans */ + asm volatile(INT10 : : "a" (0x1201), "b" (0x30)); + + /* Reset video mode */ + asm volatile(INT10 : : "a" (0x0003)); + + vga_set_8font(); +} + +/* I/O address of the VGA CRTC */ +u16 vga_crtc(void) +{ + return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; +} + +static void vga_set_480_scanlines(int end) +{ + u16 crtc; + u8 csel; + + crtc = vga_crtc(); + + out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ + out_idx(0x0b, crtc, 0x06); /* Vertical total */ + out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ + out_idx(0xea, crtc, 0x10); /* Vertical sync start */ + out_idx(end, crtc, 0x12); /* Vertical display end */ + out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ + out_idx(0x04, crtc, 0x16); /* Vertical blank end */ + csel = inb(0x3cc); + csel &= 0x0d; + csel |= 0xe2; + outb(csel, 0x3cc); +} + +static void vga_set_80x30(void) +{ + vga_set_480_scanlines(0xdf); +} + +static void vga_set_80x34(void) +{ + vga_set_14font(); + vga_set_480_scanlines(0xdb); +} + +static void vga_set_80x60(void) +{ + vga_set_8font(); + vga_set_480_scanlines(0xdf); +} + +static int vga_set_mode(struct mode_info *mode) +{ + /* Set the basic mode */ + vga_set_basic_mode(); + + /* Override a possibly broken BIOS */ + force_x = mode->x; + force_y = mode->y; + + switch (mode->mode) { + case VIDEO_80x25: + break; + case VIDEO_8POINT: + vga_set_8font(); + break; + case VIDEO_80x43: + vga_set_80x43(); + break; + case VIDEO_80x28: + vga_set_14font(); + break; + case VIDEO_80x30: + vga_set_80x30(); + break; + case VIDEO_80x34: + vga_set_80x34(); + break; + case VIDEO_80x60: + vga_set_80x60(); + break; + } + + return 0; +} + +/* + * Note: this probe includes basic information required by all + * systems. It should be executed first, by making sure + * video-vga.c is listed first in the Makefile. + */ +static int vga_probe(void) +{ + static const char *card_name[] = { + "CGA/MDA/HGC", "EGA", "VGA" + }; + static struct mode_info *mode_lists[] = { + cga_modes, + ega_modes, + vga_modes, + }; + static int mode_count[] = { + sizeof(cga_modes)/sizeof(struct mode_info), + sizeof(ega_modes)/sizeof(struct mode_info), + sizeof(vga_modes)/sizeof(struct mode_info), + }; + u8 vga_flag; + + asm(INT10 + : "=b" (boot_params.screen_info.orig_video_ega_bx) + : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */ + : "ecx", "edx", "esi", "edi"); + + /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */ + if ((u8)boot_params.screen_info.orig_video_ega_bx != 0x10) { + /* EGA/VGA */ + asm(INT10 + : "=a" (vga_flag) + : "a" (0x1a00) + : "ebx", "ecx", "edx", "esi", "edi"); + + if (vga_flag == 0x1a) { + adapter = ADAPTER_VGA; + boot_params.screen_info.orig_video_isVGA = 1; + } else { + adapter = ADAPTER_EGA; + } + } else { + adapter = ADAPTER_CGA; + } + + video_vga.modes = mode_lists[adapter]; + video_vga.card_name = card_name[adapter]; + return mode_count[adapter]; +} + +__videocard video_vga = +{ + .card_name = "VGA", + .probe = vga_probe, + .set_mode = vga_set_mode, +}; diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S deleted file mode 100644 index 8143c9516cb4..000000000000 --- a/arch/i386/boot/video.S +++ /dev/null @@ -1,2043 +0,0 @@ -/* video.S - * - * Display adapter & video mode setup, version 2.13 (14-May-99) - * - * Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz> - * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson - * - * Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999 - * - * For further information, look at Documentation/svga.txt. - * - */ - -/* Enable autodetection of SVGA adapters and modes. */ -#undef CONFIG_VIDEO_SVGA - -/* Enable autodetection of VESA modes */ -#define CONFIG_VIDEO_VESA - -/* Enable compacting of mode table */ -#define CONFIG_VIDEO_COMPACT - -/* Retain screen contents when switching modes */ -#define CONFIG_VIDEO_RETAIN - -/* Enable local mode list */ -#undef CONFIG_VIDEO_LOCAL - -/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */ -#undef CONFIG_VIDEO_400_HACK - -/* Hack that lets you force specific BIOS mode ID and specific dimensions */ -#undef CONFIG_VIDEO_GFX_HACK -#define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */ -#define VIDEO_GFX_BIOS_BX 0x0102 -#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */ - -/* This code uses an extended set of video mode numbers. These include: - * Aliases for standard modes - * NORMAL_VGA (-1) - * EXTENDED_VGA (-2) - * ASK_VGA (-3) - * Video modes numbered by menu position -- NOT RECOMMENDED because of lack - * of compatibility when extending the table. These are between 0x00 and 0xff. - */ -#define VIDEO_FIRST_MENU 0x0000 - -/* Standard BIOS video modes (BIOS number + 0x0100) */ -#define VIDEO_FIRST_BIOS 0x0100 - -/* VESA BIOS video modes (VESA number + 0x0200) */ -#define VIDEO_FIRST_VESA 0x0200 - -/* Video7 special modes (BIOS number + 0x0900) */ -#define VIDEO_FIRST_V7 0x0900 - -/* Special video modes */ -#define VIDEO_FIRST_SPECIAL 0x0f00 -#define VIDEO_80x25 0x0f00 -#define VIDEO_8POINT 0x0f01 -#define VIDEO_80x43 0x0f02 -#define VIDEO_80x28 0x0f03 -#define VIDEO_CURRENT_MODE 0x0f04 -#define VIDEO_80x30 0x0f05 -#define VIDEO_80x34 0x0f06 -#define VIDEO_80x60 0x0f07 -#define VIDEO_GFX_HACK 0x0f08 -#define VIDEO_LAST_SPECIAL 0x0f09 - -/* Video modes given by resolution */ -#define VIDEO_FIRST_RESOLUTION 0x1000 - -/* The "recalculate timings" flag */ -#define VIDEO_RECALC 0x8000 - -/* Positions of various video parameters passed to the kernel */ -/* (see also include/linux/tty.h) */ -#define PARAM_CURSOR_POS 0x00 -#define PARAM_VIDEO_PAGE 0x04 -#define PARAM_VIDEO_MODE 0x06 -#define PARAM_VIDEO_COLS 0x07 -#define PARAM_VIDEO_EGA_BX 0x0a -#define PARAM_VIDEO_LINES 0x0e -#define PARAM_HAVE_VGA 0x0f -#define PARAM_FONT_POINTS 0x10 - -#define PARAM_LFB_WIDTH 0x12 -#define PARAM_LFB_HEIGHT 0x14 -#define PARAM_LFB_DEPTH 0x16 -#define PARAM_LFB_BASE 0x18 -#define PARAM_LFB_SIZE 0x1c -#define PARAM_LFB_LINELENGTH 0x24 -#define PARAM_LFB_COLORS 0x26 -#define PARAM_VESAPM_SEG 0x2e -#define PARAM_VESAPM_OFF 0x30 -#define PARAM_LFB_PAGES 0x32 -#define PARAM_VESA_ATTRIB 0x34 -#define PARAM_CAPABILITIES 0x36 - -/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ -#ifdef CONFIG_VIDEO_RETAIN -#define DO_STORE call store_screen -#else -#define DO_STORE -#endif /* CONFIG_VIDEO_RETAIN */ - -# This is the main entry point called by setup.S -# %ds *must* be pointing to the bootsector -video: pushw %ds # We use different segments - pushw %ds # FS contains original DS - popw %fs - pushw %cs # DS is equal to CS - popw %ds - pushw %cs # ES is equal to CS - popw %es - xorw %ax, %ax - movw %ax, %gs # GS is zero - cld - call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA) -#ifdef CONFIG_VIDEO_SELECT - movw %fs:(0x01fa), %ax # User selected video mode - cmpw $ASK_VGA, %ax # Bring up the menu - jz vid2 - - call mode_set # Set the mode - jc vid1 - - leaw badmdt, %si # Invalid mode ID - call prtstr -vid2: call mode_menu -vid1: -#ifdef CONFIG_VIDEO_RETAIN - call restore_screen # Restore screen contents -#endif /* CONFIG_VIDEO_RETAIN */ - call store_edid -#endif /* CONFIG_VIDEO_SELECT */ - call mode_params # Store mode parameters - popw %ds # Restore original DS - ret - -# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel. -basic_detect: - movb $0, %fs:(PARAM_HAVE_VGA) - movb $0x12, %ah # Check EGA/VGA - movb $0x10, %bl - int $0x10 - movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel - cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card. - je basret - - incb adapter - movw $0x1a00, %ax # Check EGA or VGA? - int $0x10 - cmpb $0x1a, %al # 1a means VGA... - jne basret # anything else is EGA. - - incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA - incb adapter -basret: ret - -# Store the video mode parameters for later usage by the kernel. -# This is done by asking the BIOS except for the rows/columns -# parameters in the default 80x25 mode -- these are set directly, -# because some very obscure BIOSes supply insane values. -mode_params: -#ifdef CONFIG_VIDEO_SELECT - cmpb $0, graphic_mode - jnz mopar_gr -#endif - movb $0x03, %ah # Read cursor position - xorb %bh, %bh - int $0x10 - movw %dx, %fs:(PARAM_CURSOR_POS) - movb $0x0f, %ah # Read page/mode/width - int $0x10 - movw %bx, %fs:(PARAM_VIDEO_PAGE) - movw %ax, %fs:(PARAM_VIDEO_MODE) # Video mode and screen width - cmpb $0x7, %al # MDA/HGA => segment differs - jnz mopar0 - - movw $0xb000, video_segment -mopar0: movw %gs:(0x485), %ax # Font size - movw %ax, %fs:(PARAM_FONT_POINTS) # (valid only on EGA/VGA) - movw force_size, %ax # Forced size? - orw %ax, %ax - jz mopar1 - - movb %ah, %fs:(PARAM_VIDEO_COLS) - movb %al, %fs:(PARAM_VIDEO_LINES) - ret - -mopar1: movb $25, %al - cmpb $0, adapter # If we are on CGA/MDA/HGA, the - jz mopar2 # screen must have 25 lines. - - movb %gs:(0x484), %al # On EGA/VGA, use the EGA+ BIOS - incb %al # location of max lines. -mopar2: movb %al, %fs:(PARAM_VIDEO_LINES) - ret - -#ifdef CONFIG_VIDEO_SELECT -# Fetching of VESA frame buffer parameters -mopar_gr: - leaw modelist+1024, %di - movb $0x23, %fs:(PARAM_HAVE_VGA) - movw 16(%di), %ax - movw %ax, %fs:(PARAM_LFB_LINELENGTH) - movw 18(%di), %ax - movw %ax, %fs:(PARAM_LFB_WIDTH) - movw 20(%di), %ax - movw %ax, %fs:(PARAM_LFB_HEIGHT) - movb 25(%di), %al - movb $0, %ah - movw %ax, %fs:(PARAM_LFB_DEPTH) - movb 29(%di), %al - movb $0, %ah - movw %ax, %fs:(PARAM_LFB_PAGES) - movl 40(%di), %eax - movl %eax, %fs:(PARAM_LFB_BASE) - movl 31(%di), %eax - movl %eax, %fs:(PARAM_LFB_COLORS) - movl 35(%di), %eax - movl %eax, %fs:(PARAM_LFB_COLORS+4) - movw 0(%di), %ax - movw %ax, %fs:(PARAM_VESA_ATTRIB) - -# get video mem size - leaw modelist+1024, %di - movw $0x4f00, %ax - int $0x10 - xorl %eax, %eax - movw 18(%di), %ax - movl %eax, %fs:(PARAM_LFB_SIZE) - -# store mode capabilities - movl 10(%di), %eax - movl %eax, %fs:(PARAM_CAPABILITIES) - -# switching the DAC to 8-bit is for <= 8 bpp only - movw %fs:(PARAM_LFB_DEPTH), %ax - cmpw $8, %ax - jg dac_done - -# get DAC switching capability - xorl %eax, %eax - movb 10(%di), %al - testb $1, %al - jz dac_set - -# attempt to switch DAC to 8-bit - movw $0x4f08, %ax - movw $0x0800, %bx - int $0x10 - cmpw $0x004f, %ax - jne dac_set - movb %bh, dac_size # store actual DAC size - -dac_set: -# set color size to DAC size - movb dac_size, %al - movb %al, %fs:(PARAM_LFB_COLORS+0) - movb %al, %fs:(PARAM_LFB_COLORS+2) - movb %al, %fs:(PARAM_LFB_COLORS+4) - movb %al, %fs:(PARAM_LFB_COLORS+6) - -# set color offsets to 0 - movb $0, %fs:(PARAM_LFB_COLORS+1) - movb $0, %fs:(PARAM_LFB_COLORS+3) - movb $0, %fs:(PARAM_LFB_COLORS+5) - movb $0, %fs:(PARAM_LFB_COLORS+7) - -dac_done: -# get protected mode interface informations - movw $0x4f0a, %ax - xorw %bx, %bx - xorw %di, %di - int $0x10 - cmp $0x004f, %ax - jnz no_pm - - movw %es, %fs:(PARAM_VESAPM_SEG) - movw %di, %fs:(PARAM_VESAPM_OFF) -no_pm: ret - -# The video mode menu -mode_menu: - leaw keymsg, %si # "Return/Space/Timeout" message - call prtstr - call flush -nokey: call getkt - - cmpb $0x0d, %al # ENTER ? - je listm # yes - manual mode selection - - cmpb $0x20, %al # SPACE ? - je defmd1 # no - repeat - - call beep - jmp nokey - -defmd1: ret # No mode chosen? Default 80x25 - -listm: call mode_table # List mode table -listm0: leaw name_bann, %si # Print adapter name - call prtstr - movw card_name, %si - orw %si, %si - jnz an2 - - movb adapter, %al - leaw old_name, %si - orb %al, %al - jz an1 - - leaw ega_name, %si - decb %al - jz an1 - - leaw vga_name, %si - jmp an1 - -an2: call prtstr - leaw svga_name, %si -an1: call prtstr - leaw listhdr, %si # Table header - call prtstr - movb $0x30, %dl # DL holds mode number - leaw modelist, %si -lm1: cmpw $ASK_VGA, (%si) # End? - jz lm2 - - movb %dl, %al # Menu selection number - call prtchr - call prtsp2 - lodsw - call prthw # Mode ID - call prtsp2 - movb 0x1(%si), %al - call prtdec # Rows - movb $0x78, %al # the letter 'x' - call prtchr - lodsw - call prtdec # Columns - movb $0x0d, %al # New line - call prtchr - movb $0x0a, %al - call prtchr - incb %dl # Next character - cmpb $0x3a, %dl - jnz lm1 - - movb $0x61, %dl - jmp lm1 - -lm2: leaw prompt, %si # Mode prompt - call prtstr - leaw edit_buf, %di # Editor buffer -lm3: call getkey - cmpb $0x0d, %al # Enter? - jz lment - - cmpb $0x08, %al # Backspace? - jz lmbs - - cmpb $0x20, %al # Printable? - jc lm3 - - cmpw $edit_buf+4, %di # Enough space? - jz lm3 - - stosb - call prtchr - jmp lm3 - -lmbs: cmpw $edit_buf, %di # Backspace - jz lm3 - - decw %di - movb $0x08, %al - call prtchr - call prtspc - movb $0x08, %al - call prtchr - jmp lm3 - -lment: movb $0, (%di) - leaw crlft, %si - call prtstr - leaw edit_buf, %si - cmpb $0, (%si) # Empty string = default mode - jz lmdef - - cmpb $0, 1(%si) # One character = menu selection - jz mnusel - - cmpw $0x6373, (%si) # "scan" => mode scanning - jnz lmhx - - cmpw $0x6e61, 2(%si) - jz lmscan - -lmhx: xorw %bx, %bx # Else => mode ID in hex -lmhex: lodsb - orb %al, %al - jz lmuse1 - - subb $0x30, %al - jc lmbad - - cmpb $10, %al - jc lmhx1 - - subb $7, %al - andb $0xdf, %al - cmpb $10, %al - jc lmbad - - cmpb $16, %al - jnc lmbad - -lmhx1: shlw $4, %bx - orb %al, %bl - jmp lmhex - -lmuse1: movw %bx, %ax - jmp lmuse - -mnusel: lodsb # Menu selection - xorb %ah, %ah - subb $0x30, %al - jc lmbad - - cmpb $10, %al - jc lmuse - - cmpb $0x61-0x30, %al - jc lmbad - - subb $0x61-0x30-10, %al - cmpb $36, %al - jnc lmbad - -lmuse: call mode_set - jc lmdef - -lmbad: leaw unknt, %si - call prtstr - jmp lm2 -lmscan: cmpb $0, adapter # Scanning only on EGA/VGA - jz lmbad - - movw $0, mt_end # Scanning of modes is - movb $1, scanning # done as new autodetection. - call mode_table - jmp listm0 -lmdef: ret - -# Additional parts of mode_set... (relative jumps, you know) -setv7: # Video7 extended modes - DO_STORE - subb $VIDEO_FIRST_V7>>8, %bh - movw $0x6f05, %ax - int $0x10 - stc - ret - -_setrec: jmp setrec # Ugly... -_set_80x25: jmp set_80x25 - -# Aliases for backward compatibility. -setalias: - movw $VIDEO_80x25, %ax - incw %bx - jz mode_set - - movb $VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al - incw %bx - jnz setbad # Fall-through! - -# Setting of user mode (AX=mode ID) => CF=success -mode_set: - movw %ax, %fs:(0x01fa) # Store mode for use in acpi_wakeup.S - movw %ax, %bx - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 - - cmpb $VIDEO_FIRST_VESA>>8, %ah - jnc check_vesa - - orb %ah, %ah - jz setmenu - - decb %ah - jz setbios - -setbad: clc - movb $0, do_restore # The screen needn't be restored - ret - -setvesa: - DO_STORE - subb $VIDEO_FIRST_VESA>>8, %bh - movw $0x4f02, %ax # VESA BIOS mode set call - int $0x10 - cmpw $0x004f, %ax # AL=4f if implemented - jnz setbad # AH=0 if OK - - stc - ret - -setbios: - DO_STORE - int $0x10 # Standard BIOS mode set call - pushw %bx - movb $0x0f, %ah # Check if really set - int $0x10 - popw %bx - cmpb %bl, %al - jnz setbad - - stc - ret - -setspc: xorb %bh, %bh # Set special mode - cmpb $VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl - jnc setbad - - addw %bx, %bx - jmp *spec_inits(%bx) - -setmenu: - orb %al, %al # 80x25 is an exception - jz _set_80x25 - - pushw %bx # Set mode chosen from menu - call mode_table # Build the mode table - popw %ax - shlw $2, %ax - addw %ax, %si - cmpw %di, %si - jnc setbad - - movw (%si), %ax # Fetch mode ID -_m_s: jmp mode_set - -setres: pushw %bx # Set mode chosen by resolution - call mode_table - popw %bx - xchgb %bl, %bh -setr1: lodsw - cmpw $ASK_VGA, %ax # End of the list? - jz setbad - - lodsw - cmpw %bx, %ax - jnz setr1 - - movw -4(%si), %ax # Fetch mode ID - jmp _m_s - -check_vesa: -#ifdef CONFIG_FIRMWARE_EDID - leaw modelist+1024, %di - movw $0x4f00, %ax - int $0x10 - cmpw $0x004f, %ax - jnz setbad - - movw 4(%di), %ax - movw %ax, vbe_version -#endif - leaw modelist+1024, %di - subb $VIDEO_FIRST_VESA>>8, %bh - movw %bx, %cx # Get mode information structure - movw $0x4f01, %ax - int $0x10 - addb $VIDEO_FIRST_VESA>>8, %bh - cmpw $0x004f, %ax - jnz setbad - - movb (%di), %al # Check capabilities. - andb $0x19, %al - cmpb $0x09, %al - jz setvesa # This is a text mode - - movb (%di), %al # Check capabilities. - andb $0x99, %al - cmpb $0x99, %al - jnz _setbad # Doh! No linear frame buffer. - - subb $VIDEO_FIRST_VESA>>8, %bh - orw $0x4000, %bx # Use linear frame buffer - movw $0x4f02, %ax # VESA BIOS mode set call - int $0x10 - cmpw $0x004f, %ax # AL=4f if implemented - jnz _setbad # AH=0 if OK - - movb $1, graphic_mode # flag graphic mode - movb $0, do_restore # no screen restore - stc - ret - -_setbad: jmp setbad # Ugly... - -# Recalculate vertical display end registers -- this fixes various -# inconsistencies of extended modes on many adapters. Called when -# the VIDEO_RECALC flag is set in the mode ID. - -setrec: subb $VIDEO_RECALC>>8, %ah # Set the base mode - call mode_set - jnc rct3 - - movw %gs:(0x485), %ax # Font size in pixels - movb %gs:(0x484), %bl # Number of rows - incb %bl - mulb %bl # Number of visible - decw %ax # scan lines - 1 - movw $0x3d4, %dx - movw %ax, %bx - movb $0x12, %al # Lower 8 bits - movb %bl, %ah - outw %ax, %dx - movb $0x07, %al # Bits 8 and 9 in the overflow register - call inidx - xchgb %al, %ah - andb $0xbd, %ah - shrb %bh - jnc rct1 - orb $0x02, %ah -rct1: shrb %bh - jnc rct2 - orb $0x40, %ah -rct2: movb $0x07, %al - outw %ax, %dx - stc -rct3: ret - -# Table of routines for setting of the special modes. -spec_inits: - .word set_80x25 - .word set_8pixel - .word set_80x43 - .word set_80x28 - .word set_current - .word set_80x30 - .word set_80x34 - .word set_80x60 - .word set_gfx - -# Set the 80x25 mode. If already set, do nothing. -set_80x25: - movw $0x5019, force_size # Override possibly broken BIOS -use_80x25: -#ifdef CONFIG_VIDEO_400_HACK - movw $0x1202, %ax # Force 400 scan lines - movb $0x30, %bl - int $0x10 -#else - movb $0x0f, %ah # Get current mode ID - int $0x10 - cmpw $0x5007, %ax # Mode 7 (80x25 mono) is the only one available - jz st80 # on CGA/MDA/HGA and is also available on EGAM - - cmpw $0x5003, %ax # Unknown mode, force 80x25 color - jnz force3 - -st80: cmpb $0, adapter # CGA/MDA/HGA => mode 3/7 is always 80x25 - jz set80 - - movb %gs:(0x0484), %al # This is EGA+ -- beware of 80x50 etc. - orb %al, %al # Some buggy BIOS'es set 0 rows - jz set80 - - cmpb $24, %al # It's hopefully correct - jz set80 -#endif /* CONFIG_VIDEO_400_HACK */ -force3: DO_STORE - movw $0x0003, %ax # Forced set - int $0x10 -set80: stc - ret - -# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls. -set_8pixel: - DO_STORE - call use_80x25 # The base is 80x25 -set_8pt: - movw $0x1112, %ax # Use 8x8 font - xorb %bl, %bl - int $0x10 - movw $0x1200, %ax # Use alternate print screen - movb $0x20, %bl - int $0x10 - movw $0x1201, %ax # Turn off cursor emulation - movb $0x34, %bl - int $0x10 - movb $0x01, %ah # Define cursor scan lines 6-7 - movw $0x0607, %cx - int $0x10 -set_current: - stc - ret - -# Set the 80x28 mode. This mode works on all VGA's, because it's a standard -# 80x25 mode with 14-point fonts instead of 16-point. -set_80x28: - DO_STORE - call use_80x25 # The base is 80x25 -set14: movw $0x1111, %ax # Use 9x14 font - xorb %bl, %bl - int $0x10 - movb $0x01, %ah # Define cursor scan lines 11-12 - movw $0x0b0c, %cx - int $0x10 - stc - ret - -# Set the 80x43 mode. This mode is works on all VGA's. -# It's a 350-scanline mode with 8-pixel font. -set_80x43: - DO_STORE - movw $0x1201, %ax # Set 350 scans - movb $0x30, %bl - int $0x10 - movw $0x0003, %ax # Reset video mode - int $0x10 - jmp set_8pt # Use 8-pixel font - -# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font. -set_80x30: - call use_80x25 # Start with real 80x25 - DO_STORE - movw $0x3cc, %dx # Get CRTC port - inb %dx, %al - movb $0xd4, %dl - rorb %al # Mono or color? - jc set48a - - movb $0xb4, %dl -set48a: movw $0x0c11, %ax # Vertical sync end (also unlocks CR0-7) - call outidx - movw $0x0b06, %ax # Vertical total - call outidx - movw $0x3e07, %ax # (Vertical) overflow - call outidx - movw $0xea10, %ax # Vertical sync start - call outidx - movw $0xdf12, %ax # Vertical display end - call outidx - movw $0xe715, %ax # Vertical blank start - call outidx - movw $0x0416, %ax # Vertical blank end - call outidx - pushw %dx - movb $0xcc, %dl # Misc output register (read) - inb %dx, %al - movb $0xc2, %dl # (write) - andb $0x0d, %al # Preserve clock select bits and color bit - orb $0xe2, %al # Set correct sync polarity - outb %al, %dx - popw %dx - movw $0x501e, force_size - stc # That's all. - ret - -# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font. -set_80x34: - call set_80x30 # Set 480 scans - call set14 # And 14-pt font - movw $0xdb12, %ax # VGA vertical display end - movw $0x5022, force_size -setvde: call outidx - stc - ret - -# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font. -set_80x60: - call set_80x30 # Set 480 scans - call set_8pt # And 8-pt font - movw $0xdf12, %ax # VGA vertical display end - movw $0x503c, force_size - jmp setvde - -# Special hack for ThinkPad graphics -set_gfx: -#ifdef CONFIG_VIDEO_GFX_HACK - movw $VIDEO_GFX_BIOS_AX, %ax - movw $VIDEO_GFX_BIOS_BX, %bx - int $0x10 - movw $VIDEO_GFX_DUMMY_RESOLUTION, force_size - stc -#endif - ret - -#ifdef CONFIG_VIDEO_RETAIN - -# Store screen contents to temporary buffer. -store_screen: - cmpb $0, do_restore # Already stored? - jnz stsr - - testb $CAN_USE_HEAP, loadflags # Have we space for storing? - jz stsr - - pushw %ax - pushw %bx - pushw force_size # Don't force specific size - movw $0, force_size - call mode_params # Obtain params of current mode - popw force_size - movb %fs:(PARAM_VIDEO_LINES), %ah - movb %fs:(PARAM_VIDEO_COLS), %al - movw %ax, %bx # BX=dimensions - mulb %ah - movw %ax, %cx # CX=number of characters - addw %ax, %ax # Calculate image size - addw $modelist+1024+4, %ax - cmpw heap_end_ptr, %ax - jnc sts1 # Unfortunately, out of memory - - movw %fs:(PARAM_CURSOR_POS), %ax # Store mode params - leaw modelist+1024, %di - stosw - movw %bx, %ax - stosw - pushw %ds # Store the screen - movw video_segment, %ds - xorw %si, %si - rep - movsw - popw %ds - incb do_restore # Screen will be restored later -sts1: popw %bx - popw %ax -stsr: ret - -# Restore screen contents from temporary buffer. -restore_screen: - cmpb $0, do_restore # Has the screen been stored? - jz res1 - - call mode_params # Get parameters of current mode - movb %fs:(PARAM_VIDEO_LINES), %cl - movb %fs:(PARAM_VIDEO_COLS), %ch - leaw modelist+1024, %si # Screen buffer - lodsw # Set cursor position - movw %ax, %dx - cmpb %cl, %dh - jc res2 - - movb %cl, %dh - decb %dh -res2: cmpb %ch, %dl - jc res3 - - movb %ch, %dl - decb %dl -res3: movb $0x02, %ah - movb $0x00, %bh - int $0x10 - lodsw # Display size - movb %ah, %dl # DL=number of lines - movb $0, %ah # BX=phys. length of orig. line - movw %ax, %bx - cmpb %cl, %dl # Too many? - jc res4 - - pushw %ax - movb %dl, %al - subb %cl, %al - mulb %bl - addw %ax, %si - addw %ax, %si - popw %ax - movb %cl, %dl -res4: cmpb %ch, %al # Too wide? - jc res5 - - movb %ch, %al # AX=width of src. line -res5: movb $0, %cl - xchgb %ch, %cl - movw %cx, %bp # BP=width of dest. line - pushw %es - movw video_segment, %es - xorw %di, %di # Move the data - addw %bx, %bx # Convert BX and BP to _bytes_ - addw %bp, %bp -res6: pushw %si - pushw %di - movw %ax, %cx - rep - movsw - popw %di - popw %si - addw %bp, %di - addw %bx, %si - decb %dl - jnz res6 - - popw %es # Done -res1: ret -#endif /* CONFIG_VIDEO_RETAIN */ - -# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port) -outidx: outb %al, %dx - pushw %ax - movb %ah, %al - incw %dx - outb %al, %dx - decw %dx - popw %ax - ret - -# Build the table of video modes (stored after the setup.S code at the -# `modelist' label. Each video mode record looks like: -# .word MODE-ID (our special mode ID (see above)) -# .byte rows (number of rows) -# .byte columns (number of columns) -# Returns address of the end of the table in DI, the end is marked -# with a ASK_VGA ID. -mode_table: - movw mt_end, %di # Already filled? - orw %di, %di - jnz mtab1x - - leaw modelist, %di # Store standard modes: - movl $VIDEO_80x25 + 0x50190000, %eax # The 80x25 mode (ALL) - stosl - movb adapter, %al # CGA/MDA/HGA -- no more modes - orb %al, %al - jz mtabe - - decb %al - jnz mtabv - - movl $VIDEO_8POINT + 0x502b0000, %eax # The 80x43 EGA mode - stosl - jmp mtabe - -mtab1x: jmp mtab1 - -mtabv: leaw vga_modes, %si # All modes for std VGA - movw $vga_modes_end-vga_modes, %cx - rep # I'm unable to use movsw as I don't know how to store a half - movsb # of the expression above to cx without using explicit shr. - - cmpb $0, scanning # Mode scan requested? - jz mscan1 - - call mode_scan -mscan1: - -#ifdef CONFIG_VIDEO_LOCAL - call local_modes -#endif /* CONFIG_VIDEO_LOCAL */ - -#ifdef CONFIG_VIDEO_VESA - call vesa_modes # Detect VESA VGA modes -#endif /* CONFIG_VIDEO_VESA */ - -#ifdef CONFIG_VIDEO_SVGA - cmpb $0, scanning # Bypass when scanning - jnz mscan2 - - call svga_modes # Detect SVGA cards & modes -mscan2: -#endif /* CONFIG_VIDEO_SVGA */ - -mtabe: - -#ifdef CONFIG_VIDEO_COMPACT - leaw modelist, %si - movw %di, %dx - movw %si, %di -cmt1: cmpw %dx, %si # Scan all modes - jz cmt2 - - leaw modelist, %bx # Find in previous entries - movw 2(%si), %cx -cmt3: cmpw %bx, %si - jz cmt4 - - cmpw 2(%bx), %cx # Found => don't copy this entry - jz cmt5 - - addw $4, %bx - jmp cmt3 - -cmt4: movsl # Copy entry - jmp cmt1 - -cmt5: addw $4, %si # Skip entry - jmp cmt1 - -cmt2: -#endif /* CONFIG_VIDEO_COMPACT */ - - movw $ASK_VGA, (%di) # End marker - movw %di, mt_end -mtab1: leaw modelist, %si # SI=mode list, DI=list end -ret0: ret - -# Modes usable on all standard VGAs -vga_modes: - .word VIDEO_8POINT - .word 0x5032 # 80x50 - .word VIDEO_80x43 - .word 0x502b # 80x43 - .word VIDEO_80x28 - .word 0x501c # 80x28 - .word VIDEO_80x30 - .word 0x501e # 80x30 - .word VIDEO_80x34 - .word 0x5022 # 80x34 - .word VIDEO_80x60 - .word 0x503c # 80x60 -#ifdef CONFIG_VIDEO_GFX_HACK - .word VIDEO_GFX_HACK - .word VIDEO_GFX_DUMMY_RESOLUTION -#endif - -vga_modes_end: -# Detect VESA modes. - -#ifdef CONFIG_VIDEO_VESA -vesa_modes: - cmpb $2, adapter # VGA only - jnz ret0 - - movw %di, %bp # BP=original mode table end - addw $0x200, %di # Buffer space - movw $0x4f00, %ax # VESA Get card info call - int $0x10 - movw %bp, %di - cmpw $0x004f, %ax # Successful? - jnz ret0 - - cmpw $0x4556, 0x200(%di) - jnz ret0 - - cmpw $0x4153, 0x202(%di) - jnz ret0 - - movw $vesa_name, card_name # Set name to "VESA VGA" - pushw %gs - lgsw 0x20e(%di), %si # GS:SI=mode list - movw $128, %cx # Iteration limit -vesa1: -# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst. -# XXX: lodsw %gs:(%si), %ax # Get next mode in the list - gs; lodsw - cmpw $0xffff, %ax # End of the table? - jz vesar - - cmpw $0x0080, %ax # Check validity of mode ID - jc vesa2 - - orb %ah, %ah # Valid IDs: 0x0000-0x007f/0x0100-0x07ff - jz vesan # Certain BIOSes report 0x80-0xff! - - cmpw $0x0800, %ax - jnc vesae - -vesa2: pushw %cx - movw %ax, %cx # Get mode information structure - movw $0x4f01, %ax - int $0x10 - movw %cx, %bx # BX=mode number - addb $VIDEO_FIRST_VESA>>8, %bh - popw %cx - cmpw $0x004f, %ax - jnz vesan # Don't report errors (buggy BIOSES) - - movb (%di), %al # Check capabilities. We require - andb $0x19, %al # a color text mode. - cmpb $0x09, %al - jnz vesan - - cmpw $0xb800, 8(%di) # Standard video memory address required - jnz vesan - - testb $2, (%di) # Mode characteristics supplied? - movw %bx, (%di) # Store mode number - jz vesa3 - - xorw %dx, %dx - movw 0x12(%di), %bx # Width - orb %bh, %bh - jnz vesan - - movb %bl, 0x3(%di) - movw 0x14(%di), %ax # Height - orb %ah, %ah - jnz vesan - - movb %al, 2(%di) - mulb %bl - cmpw $8193, %ax # Small enough for Linux console driver? - jnc vesan - - jmp vesaok - -vesa3: subw $0x8108, %bx # This mode has no detailed info specified, - jc vesan # so it must be a standard VESA mode. - - cmpw $5, %bx - jnc vesan - - movw vesa_text_mode_table(%bx), %ax - movw %ax, 2(%di) -vesaok: addw $4, %di # The mode is valid. Store it. -vesan: loop vesa1 # Next mode. Limit exceeded => error -vesae: leaw vesaer, %si - call prtstr - movw %bp, %di # Discard already found modes. -vesar: popw %gs - ret - -# Dimensions of standard VESA text modes -vesa_text_mode_table: - .byte 60, 80 # 0108 - .byte 25, 132 # 0109 - .byte 43, 132 # 010A - .byte 50, 132 # 010B - .byte 60, 132 # 010C -#endif /* CONFIG_VIDEO_VESA */ - -# Scan for video modes. A bit dirty, but should work. -mode_scan: - movw $0x0100, %cx # Start with mode 0 -scm1: movb $0, %ah # Test the mode - movb %cl, %al - int $0x10 - movb $0x0f, %ah - int $0x10 - cmpb %cl, %al - jnz scm2 # Mode not set - - movw $0x3c0, %dx # Test if it's a text mode - movb $0x10, %al # Mode bits - call inidx - andb $0x03, %al - jnz scm2 - - movb $0xce, %dl # Another set of mode bits - movb $0x06, %al - call inidx - shrb %al - jc scm2 - - movb $0xd4, %dl # Cursor location - movb $0x0f, %al - call inidx - orb %al, %al - jnz scm2 - - movw %cx, %ax # Ok, store the mode - stosw - movb %gs:(0x484), %al # Number of rows - incb %al - stosb - movw %gs:(0x44a), %ax # Number of columns - stosb -scm2: incb %cl - jns scm1 - - movw $0x0003, %ax # Return back to mode 3 - int $0x10 - ret - -tstidx: outw %ax, %dx # OUT DX,AX and inidx -inidx: outb %al, %dx # Read from indexed VGA register - incw %dx # AL=index, DX=index reg port -> AL=data - inb %dx, %al - decw %dx - ret - -# Try to detect type of SVGA card and supply (usually approximate) video -# mode table for it. - -#ifdef CONFIG_VIDEO_SVGA -svga_modes: - leaw svga_table, %si # Test all known SVGA adapters -dosvga: lodsw - movw %ax, %bp # Default mode table - orw %ax, %ax - jz didsv1 - - lodsw # Pointer to test routine - pushw %si - pushw %di - pushw %es - movw $0xc000, %bx - movw %bx, %es - call *%ax # Call test routine - popw %es - popw %di - popw %si - orw %bp, %bp - jz dosvga - - movw %bp, %si # Found, copy the modes - movb svga_prefix, %ah -cpsvga: lodsb - orb %al, %al - jz didsv - - stosw - movsw - jmp cpsvga - -didsv: movw %si, card_name # Store pointer to card name -didsv1: ret - -# Table of all known SVGA cards. For each card, we store a pointer to -# a table of video modes supported by the card and a pointer to a routine -# used for testing of presence of the card. The video mode table is always -# followed by the name of the card or the chipset. -svga_table: - .word ati_md, ati_test - .word oak_md, oak_test - .word paradise_md, paradise_test - .word realtek_md, realtek_test - .word s3_md, s3_test - .word chips_md, chips_test - .word video7_md, video7_test - .word cirrus5_md, cirrus5_test - .word cirrus6_md, cirrus6_test - .word cirrus1_md, cirrus1_test - .word ahead_md, ahead_test - .word everex_md, everex_test - .word genoa_md, genoa_test - .word trident_md, trident_test - .word tseng_md, tseng_test - .word 0 - -# Test routines and mode tables: - -# S3 - The test algorithm was taken from the SuperProbe package -# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org -s3_test: - movw $0x0f35, %cx # we store some constants in cl/ch - movw $0x03d4, %dx - movb $0x38, %al - call inidx - movb %al, %bh # store current CRT-register 0x38 - movw $0x0038, %ax - call outidx # disable writing to special regs - movb %cl, %al # check whether we can write special reg 0x35 - call inidx - movb %al, %bl # save the current value of CRT reg 0x35 - andb $0xf0, %al # clear bits 0-3 - movb %al, %ah - movb %cl, %al # and write it to CRT reg 0x35 - call outidx - call inidx # now read it back - andb %ch, %al # clear the upper 4 bits - jz s3_2 # the first test failed. But we have a - - movb %bl, %ah # second chance - movb %cl, %al - call outidx - jmp s3_1 # do the other tests - -s3_2: movw %cx, %ax # load ah with 0xf and al with 0x35 - orb %bl, %ah # set the upper 4 bits of ah with the orig value - call outidx # write ... - call inidx # ... and reread - andb %cl, %al # turn off the upper 4 bits - pushw %ax - movb %bl, %ah # restore old value in register 0x35 - movb %cl, %al - call outidx - popw %ax - cmpb %ch, %al # setting lower 4 bits was successful => bad - je no_s3 # writing is allowed => this is not an S3 - -s3_1: movw $0x4838, %ax # allow writing to special regs by putting - call outidx # magic number into CRT-register 0x38 - movb %cl, %al # check whether we can write special reg 0x35 - call inidx - movb %al, %bl - andb $0xf0, %al - movb %al, %ah - movb %cl, %al - call outidx - call inidx - andb %ch, %al - jnz no_s3 # no, we can't write => no S3 - - movw %cx, %ax - orb %bl, %ah - call outidx - call inidx - andb %ch, %al - pushw %ax - movb %bl, %ah # restore old value in register 0x35 - movb %cl, %al - call outidx - popw %ax - cmpb %ch, %al - jne no_s31 # writing not possible => no S3 - movb $0x30, %al - call inidx # now get the S3 id ... - leaw idS3, %di - movw $0x10, %cx - repne - scasb - je no_s31 - - movb %bh, %ah - movb $0x38, %al - jmp s3rest - -no_s3: movb $0x35, %al # restore CRT register 0x35 - movb %bl, %ah - call outidx -no_s31: xorw %bp, %bp # Detection failed -s3rest: movb %bh, %ah - movb $0x38, %al # restore old value of CRT register 0x38 - jmp outidx - -idS3: .byte 0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95 - .byte 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0 - -s3_md: .byte 0x54, 0x2b, 0x84 - .byte 0x55, 0x19, 0x84 - .byte 0 - .ascii "S3" - .byte 0 - -# ATI cards. -ati_test: - leaw idati, %si - movw $0x31, %di - movw $0x09, %cx - repe - cmpsb - je atiok - - xorw %bp, %bp -atiok: ret - -idati: .ascii "761295520" - -ati_md: .byte 0x23, 0x19, 0x84 - .byte 0x33, 0x2c, 0x84 - .byte 0x22, 0x1e, 0x64 - .byte 0x21, 0x19, 0x64 - .byte 0x58, 0x21, 0x50 - .byte 0x5b, 0x1e, 0x50 - .byte 0 - .ascii "ATI" - .byte 0 - -# AHEAD -ahead_test: - movw $0x200f, %ax - movw $0x3ce, %dx - outw %ax, %dx - incw %dx - inb %dx, %al - cmpb $0x20, %al - je isahed - - cmpb $0x21, %al - je isahed - - xorw %bp, %bp -isahed: ret - -ahead_md: - .byte 0x22, 0x2c, 0x84 - .byte 0x23, 0x19, 0x84 - .byte 0x24, 0x1c, 0x84 - .byte 0x2f, 0x32, 0xa0 - .byte 0x32, 0x22, 0x50 - .byte 0x34, 0x42, 0x50 - .byte 0 - .ascii "Ahead" - .byte 0 - -# Chips & Tech. -chips_test: - movw $0x3c3, %dx - inb %dx, %al - orb $0x10, %al - outb %al, %dx - movw $0x104, %dx - inb %dx, %al - movb %al, %bl - movw $0x3c3, %dx - inb %dx, %al - andb $0xef, %al - outb %al, %dx - cmpb $0xa5, %bl - je cantok - - xorw %bp, %bp -cantok: ret - -chips_md: - .byte 0x60, 0x19, 0x84 - .byte 0x61, 0x32, 0x84 - .byte 0 - .ascii "Chips & Technologies" - .byte 0 - -# Cirrus Logic 5X0 -cirrus1_test: - movw $0x3d4, %dx - movb $0x0c, %al - outb %al, %dx - incw %dx - inb %dx, %al - movb %al, %bl - xorb %al, %al - outb %al, %dx - decw %dx - movb $0x1f, %al - outb %al, %dx - incw %dx - inb %dx, %al - movb %al, %bh - xorb %ah, %ah - shlb $4, %al - movw %ax, %cx - movb %bh, %al - shrb $4, %al - addw %ax, %cx - shlw $8, %cx - addw $6, %cx - movw %cx, %ax - movw $0x3c4, %dx - outw %ax, %dx - incw %dx - inb %dx, %al - andb %al, %al - jnz nocirr - - movb %bh, %al - outb %al, %dx - inb %dx, %al - cmpb $0x01, %al - je iscirr - -nocirr: xorw %bp, %bp -iscirr: movw $0x3d4, %dx - movb %bl, %al - xorb %ah, %ah - shlw $8, %ax - addw $0x0c, %ax - outw %ax, %dx - ret - -cirrus1_md: - .byte 0x1f, 0x19, 0x84 - .byte 0x20, 0x2c, 0x84 - .byte 0x22, 0x1e, 0x84 - .byte 0x31, 0x25, 0x64 - .byte 0 - .ascii "Cirrus Logic 5X0" - .byte 0 - -# Cirrus Logic 54XX -cirrus5_test: - movw $0x3c4, %dx - movb $6, %al - call inidx - movb %al, %bl # BL=backup - movw $6, %ax - call tstidx - cmpb $0x0f, %al - jne c5fail - - movw $0x1206, %ax - call tstidx - cmpb $0x12, %al - jne c5fail - - movb $0x1e, %al - call inidx - movb %al, %bh - movb %bh, %ah - andb $0xc0, %ah - movb $0x1e, %al - call tstidx - andb $0x3f, %al - jne c5xx - - movb $0x1e, %al - movb %bh, %ah - orb $0x3f, %ah - call tstidx - xorb $0x3f, %al - andb $0x3f, %al -c5xx: pushf - movb $0x1e, %al - movb %bh, %ah - outw %ax, %dx - popf - je c5done - -c5fail: xorw %bp, %bp -c5done: movb $6, %al - movb %bl, %ah - outw %ax, %dx - ret - -cirrus5_md: - .byte 0x14, 0x19, 0x84 - .byte 0x54, 0x2b, 0x84 - .byte 0 - .ascii "Cirrus Logic 54XX" - .byte 0 - -# Cirrus Logic 64XX -- no known extra modes, but must be identified, because -# it's misidentified by the Ahead test. -cirrus6_test: - movw $0x3ce, %dx - movb $0x0a, %al - call inidx - movb %al, %bl # BL=backup - movw $0xce0a, %ax - call tstidx - orb %al, %al - jne c2fail - - movw $0xec0a, %ax - call tstidx - cmpb $0x01, %al - jne c2fail - - movb $0xaa, %al - call inidx # 4X, 5X, 7X and 8X are valid 64XX chip ID's. - shrb $4, %al - subb $4, %al - jz c6done - - decb %al - jz c6done - - subb $2, %al - jz c6done - - decb %al - jz c6done - -c2fail: xorw %bp, %bp -c6done: movb $0x0a, %al - movb %bl, %ah - outw %ax, %dx - ret - -cirrus6_md: - .byte 0 - .ascii "Cirrus Logic 64XX" - .byte 0 - -# Everex / Trident -everex_test: - movw $0x7000, %ax - xorw %bx, %bx - int $0x10 - cmpb $0x70, %al - jne noevrx - - shrw $4, %dx - cmpw $0x678, %dx - je evtrid - - cmpw $0x236, %dx - jne evrxok - -evtrid: leaw trident_md, %bp -evrxok: ret - -noevrx: xorw %bp, %bp - ret - -everex_md: - .byte 0x03, 0x22, 0x50 - .byte 0x04, 0x3c, 0x50 - .byte 0x07, 0x2b, 0x64 - .byte 0x08, 0x4b, 0x64 - .byte 0x0a, 0x19, 0x84 - .byte 0x0b, 0x2c, 0x84 - .byte 0x16, 0x1e, 0x50 - .byte 0x18, 0x1b, 0x64 - .byte 0x21, 0x40, 0xa0 - .byte 0x40, 0x1e, 0x84 - .byte 0 - .ascii "Everex/Trident" - .byte 0 - -# Genoa. -genoa_test: - leaw idgenoa, %si # Check Genoa 'clues' - xorw %ax, %ax - movb %es:(0x37), %al - movw %ax, %di - movw $0x04, %cx - decw %si - decw %di -l1: incw %si - incw %di - movb (%si), %al - testb %al, %al - jz l2 - - cmpb %es:(%di), %al -l2: loope l1 - orw %cx, %cx - je isgen - - xorw %bp, %bp -isgen: ret - -idgenoa: .byte 0x77, 0x00, 0x99, 0x66 - -genoa_md: - .byte 0x58, 0x20, 0x50 - .byte 0x5a, 0x2a, 0x64 - .byte 0x60, 0x19, 0x84 - .byte 0x61, 0x1d, 0x84 - .byte 0x62, 0x20, 0x84 - .byte 0x63, 0x2c, 0x84 - .byte 0x64, 0x3c, 0x84 - .byte 0x6b, 0x4f, 0x64 - .byte 0x72, 0x3c, 0x50 - .byte 0x74, 0x42, 0x50 - .byte 0x78, 0x4b, 0x64 - .byte 0 - .ascii "Genoa" - .byte 0 - -# OAK -oak_test: - leaw idoakvga, %si - movw $0x08, %di - movw $0x08, %cx - repe - cmpsb - je isoak - - xorw %bp, %bp -isoak: ret - -idoakvga: .ascii "OAK VGA " - -oak_md: .byte 0x4e, 0x3c, 0x50 - .byte 0x4f, 0x3c, 0x84 - .byte 0x50, 0x19, 0x84 - .byte 0x51, 0x2b, 0x84 - .byte 0 - .ascii "OAK" - .byte 0 - -# WD Paradise. -paradise_test: - leaw idparadise, %si - movw $0x7d, %di - movw $0x04, %cx - repe - cmpsb - je ispara - - xorw %bp, %bp -ispara: ret - -idparadise: .ascii "VGA=" - -paradise_md: - .byte 0x41, 0x22, 0x50 - .byte 0x47, 0x1c, 0x84 - .byte 0x55, 0x19, 0x84 - .byte 0x54, 0x2c, 0x84 - .byte 0 - .ascii "Paradise" - .byte 0 - -# Trident. -trident_test: - movw $0x3c4, %dx - movb $0x0e, %al - outb %al, %dx - incw %dx - inb %dx, %al - xchgb %al, %ah - xorb %al, %al - outb %al, %dx - inb %dx, %al - xchgb %ah, %al - movb %al, %bl # Strange thing ... in the book this wasn't - andb $0x02, %bl # necessary but it worked on my card which - jz setb2 # is a trident. Without it the screen goes - # blurred ... - andb $0xfd, %al - jmp clrb2 - -setb2: orb $0x02, %al -clrb2: outb %al, %dx - andb $0x0f, %ah - cmpb $0x02, %ah - je istrid - - xorw %bp, %bp -istrid: ret - -trident_md: - .byte 0x50, 0x1e, 0x50 - .byte 0x51, 0x2b, 0x50 - .byte 0x52, 0x3c, 0x50 - .byte 0x57, 0x19, 0x84 - .byte 0x58, 0x1e, 0x84 - .byte 0x59, 0x2b, 0x84 - .byte 0x5a, 0x3c, 0x84 - .byte 0 - .ascii "Trident" - .byte 0 - -# Tseng. -tseng_test: - movw $0x3cd, %dx - inb %dx, %al # Could things be this simple ! :-) - movb %al, %bl - movb $0x55, %al - outb %al, %dx - inb %dx, %al - movb %al, %ah - movb %bl, %al - outb %al, %dx - cmpb $0x55, %ah - je istsen - -isnot: xorw %bp, %bp -istsen: ret - -tseng_md: - .byte 0x26, 0x3c, 0x50 - .byte 0x2a, 0x28, 0x64 - .byte 0x23, 0x19, 0x84 - .byte 0x24, 0x1c, 0x84 - .byte 0x22, 0x2c, 0x84 - .byte 0x21, 0x3c, 0x84 - .byte 0 - .ascii "Tseng" - .byte 0 - -# Video7. -video7_test: - movw $0x3cc, %dx - inb %dx, %al - movw $0x3b4, %dx - andb $0x01, %al - jz even7 - - movw $0x3d4, %dx -even7: movb $0x0c, %al - outb %al, %dx - incw %dx - inb %dx, %al - movb %al, %bl - movb $0x55, %al - outb %al, %dx - inb %dx, %al - decw %dx - movb $0x1f, %al - outb %al, %dx - incw %dx - inb %dx, %al - movb %al, %bh - decw %dx - movb $0x0c, %al - outb %al, %dx - incw %dx - movb %bl, %al - outb %al, %dx - movb $0x55, %al - xorb $0xea, %al - cmpb %bh, %al - jne isnot - - movb $VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching - ret - -video7_md: - .byte 0x40, 0x2b, 0x50 - .byte 0x43, 0x3c, 0x50 - .byte 0x44, 0x3c, 0x64 - .byte 0x41, 0x19, 0x84 - .byte 0x42, 0x2c, 0x84 - .byte 0x45, 0x1c, 0x84 - .byte 0 - .ascii "Video 7" - .byte 0 - -# Realtek VGA -realtek_test: - leaw idrtvga, %si - movw $0x45, %di - movw $0x0b, %cx - repe - cmpsb - je isrt - - xorw %bp, %bp -isrt: ret - -idrtvga: .ascii "REALTEK VGA" - -realtek_md: - .byte 0x1a, 0x3c, 0x50 - .byte 0x1b, 0x19, 0x84 - .byte 0x1c, 0x1e, 0x84 - .byte 0x1d, 0x2b, 0x84 - .byte 0x1e, 0x3c, 0x84 - .byte 0 - .ascii "REALTEK" - .byte 0 - -#endif /* CONFIG_VIDEO_SVGA */ - -# User-defined local mode table (VGA only) -#ifdef CONFIG_VIDEO_LOCAL -local_modes: - leaw local_mode_table, %si -locm1: lodsw - orw %ax, %ax - jz locm2 - - stosw - movsw - jmp locm1 - -locm2: ret - -# This is the table of local video modes which can be supplied manually -# by the user. Each entry consists of mode ID (word) and dimensions -# (byte for column count and another byte for row count). These modes -# are placed before all SVGA and VESA modes and override them if table -# compacting is enabled. The table must end with a zero word followed -# by NUL-terminated video adapter name. -local_mode_table: - .word 0x0100 # Example: 40x25 - .byte 25,40 - .word 0 - .ascii "Local" - .byte 0 -#endif /* CONFIG_VIDEO_LOCAL */ - -# Read a key and return the ASCII code in al, scan code in ah -getkey: xorb %ah, %ah - int $0x16 - ret - -# Read a key with a timeout of 30 seconds. -# The hardware clock is used to get the time. -getkt: call gettime - addb $30, %al # Wait 30 seconds - cmpb $60, %al - jl lminute - - subb $60, %al -lminute: - movb %al, %cl -again: movb $0x01, %ah - int $0x16 - jnz getkey # key pressed, so get it - - call gettime - cmpb %cl, %al - jne again - - movb $0x20, %al # timeout, return `space' - ret - -# Flush the keyboard buffer -flush: movb $0x01, %ah - int $0x16 - jz empty - - xorb %ah, %ah - int $0x16 - jmp flush - -empty: ret - -# Print hexadecimal number. -prthw: pushw %ax - movb %ah, %al - call prthb - popw %ax -prthb: pushw %ax - shrb $4, %al - call prthn - popw %ax - andb $0x0f, %al -prthn: cmpb $0x0a, %al - jc prth1 - - addb $0x07, %al -prth1: addb $0x30, %al - jmp prtchr - -# Print decimal number in al -prtdec: pushw %ax - pushw %cx - xorb %ah, %ah - movb $0x0a, %cl - idivb %cl - cmpb $0x09, %al - jbe lt100 - - call prtdec - jmp skip10 - -lt100: addb $0x30, %al - call prtchr -skip10: movb %ah, %al - addb $0x30, %al - call prtchr - popw %cx - popw %ax - ret - -store_edid: -#ifdef CONFIG_FIRMWARE_EDID - pushw %es # just save all registers - pushw %ax - pushw %bx - pushw %cx - pushw %dx - pushw %di - - pushw %fs - popw %es - - movl $0x13131313, %eax # memset block with 0x13 - movw $32, %cx - movw $0x140, %di - cld - rep - stosl - - cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0 - jl no_edid - - pushw %es # save ES - xorw %di, %di # Report Capability - pushw %di - popw %es # ES:DI must be 0:0 - movw $0x4f15, %ax - xorw %bx, %bx - xorw %cx, %cx - int $0x10 - popw %es # restore ES - - cmpb $0x00, %ah # call successful - jne no_edid - - cmpb $0x4f, %al # function supported - jne no_edid - - movw $0x4f15, %ax # do VBE/DDC - movw $0x01, %bx - movw $0x00, %cx - movw $0x00, %dx - movw $0x140, %di - int $0x10 - -no_edid: - popw %di # restore all registers - popw %dx - popw %cx - popw %bx - popw %ax - popw %es -#endif - ret - -# VIDEO_SELECT-only variables -mt_end: .word 0 # End of video mode table if built -edit_buf: .space 6 # Line editor buffer -card_name: .word 0 # Pointer to adapter name -scanning: .byte 0 # Performing mode scan -do_restore: .byte 0 # Screen contents altered during mode change -svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes -graphic_mode: .byte 0 # Graphic mode with a linear frame buffer -dac_size: .byte 6 # DAC bit depth -vbe_version: .word 0 # VBE bios version - -# Status messages -keymsg: .ascii "Press <RETURN> to see video modes available, " - .ascii "<SPACE> to continue or wait 30 secs" - .byte 0x0d, 0x0a, 0 - -listhdr: .byte 0x0d, 0x0a - .ascii "Mode: COLSxROWS:" - -crlft: .byte 0x0d, 0x0a, 0 - -prompt: .byte 0x0d, 0x0a - .asciz "Enter mode number or `scan': " - -unknt: .asciz "Unknown mode ID. Try again." - -badmdt: .ascii "You passed an undefined mode number." - .byte 0x0d, 0x0a, 0 - -vesaer: .ascii "Error: Scanning of VESA modes failed. Please " - .ascii "report to <mj@ucw.cz>." - .byte 0x0d, 0x0a, 0 - -old_name: .asciz "CGA/MDA/HGA" - -ega_name: .asciz "EGA" - -svga_name: .ascii " " - -vga_name: .asciz "VGA" - -vesa_name: .asciz "VESA" - -name_bann: .asciz "Video adapter: " -#endif /* CONFIG_VIDEO_SELECT */ - -# Other variables: -adapter: .byte 0 # Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA -video_segment: .word 0xb800 # Video memory segment -force_size: .word 0 # Use this size instead of the one in BIOS vars diff --git a/arch/i386/boot/video.c b/arch/i386/boot/video.c new file mode 100644 index 000000000000..3bb3573cd6a1 --- /dev/null +++ b/arch/i386/boot/video.c @@ -0,0 +1,456 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video.c + * + * Select video mode + */ + +#include "boot.h" +#include "video.h" +#include "vesa.h" + +/* + * Mode list variables + */ +static struct card_info cards[]; /* List of cards to probe for */ + +/* + * Common variables + */ +int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */ +u16 video_segment; +int force_x, force_y; /* Don't query the BIOS for cols/rows */ + +int do_restore = 0; /* Screen contents changed during mode flip */ +int graphic_mode; /* Graphic mode with linear frame buffer */ + +static void store_cursor_position(void) +{ + u16 curpos; + u16 ax, bx; + + ax = 0x0300; + bx = 0; + asm(INT10 + : "=d" (curpos), "+a" (ax), "+b" (bx) + : : "ecx", "esi", "edi"); + + boot_params.screen_info.orig_x = curpos; + boot_params.screen_info.orig_y = curpos >> 8; +} + +static void store_video_mode(void) +{ + u16 ax, page; + + /* N.B.: the saving of the video page here is a bit silly, + since we pretty much assume page 0 everywhere. */ + ax = 0x0f00; + asm(INT10 + : "+a" (ax), "=b" (page) + : : "ecx", "edx", "esi", "edi"); + + /* Not all BIOSes are clean with respect to the top bit */ + boot_params.screen_info.orig_video_mode = ax & 0x7f; + boot_params.screen_info.orig_video_page = page; +} + +/* + * Store the video mode parameters for later usage by the kernel. + * This is done by asking the BIOS except for the rows/columns + * parameters in the default 80x25 mode -- these are set directly, + * because some very obscure BIOSes supply insane values. + */ +static void store_mode_params(void) +{ + u16 font_size; + int x, y; + + /* For graphics mode, it is up to the mode-setting driver + (currently only video-vesa.c) to store the parameters */ + if (graphic_mode) + return; + + store_cursor_position(); + store_video_mode(); + + if (boot_params.screen_info.orig_video_mode == 0x07) { + /* MDA, HGC, or VGA in monochrome mode */ + video_segment = 0xb000; + } else { + /* CGA, EGA, VGA and so forth */ + video_segment = 0xb800; + } + + set_fs(0); + font_size = rdfs16(0x485); /* Font size, BIOS area */ + boot_params.screen_info.orig_video_points = font_size; + + x = rdfs16(0x44a); + y = (adapter == ADAPTER_CGA) ? 25 : rdfs8(0x484)+1; + + if (force_x) + x = force_x; + if (force_y) + y = force_y; + + boot_params.screen_info.orig_video_cols = x; + boot_params.screen_info.orig_video_lines = y; +} + +/* Probe the video drivers and have them generate their mode lists. */ +static void probe_cards(int unsafe) +{ + struct card_info *card; + static u8 probed[2]; + + if (probed[unsafe]) + return; + + probed[unsafe] = 1; + + for (card = video_cards; card < video_cards_end; card++) { + if (card->unsafe == unsafe) { + if (card->probe) + card->nmodes = card->probe(); + else + card->nmodes = 0; + } + } +} + +/* Test if a mode is defined */ +int mode_defined(u16 mode) +{ + struct card_info *card; + struct mode_info *mi; + int i; + + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + if (mi->mode == mode) + return 1; + } + } + + return 0; +} + +/* Set mode (without recalc) */ +static int raw_set_mode(u16 mode) +{ + int nmode, i; + struct card_info *card; + struct mode_info *mi; + + /* Drop the recalc bit if set */ + mode &= ~VIDEO_RECALC; + + /* Scan for mode based on fixed ID, position, or resolution */ + nmode = 0; + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + int visible = mi->x || mi->y; + + if ((mode == nmode && visible) || + mode == mi->mode || + mode == (mi->y << 8)+mi->x) + return card->set_mode(mi); + + if (visible) + nmode++; + } + } + + /* Nothing found? Is it an "exceptional" (unprobed) mode? */ + for (card = video_cards; card < video_cards_end; card++) { + if (mode >= card->xmode_first && + mode < card->xmode_first+card->xmode_n) { + struct mode_info mix; + mix.mode = mode; + mix.x = mix.y = 0; + return card->set_mode(&mix); + } + } + + /* Otherwise, failure... */ + return -1; +} + +/* + * Recalculate the vertical video cutoff (hack!) + */ +static void vga_recalc_vertical(void) +{ + unsigned int font_size, rows; + u16 crtc; + u8 ov; + + set_fs(0); + font_size = rdfs8(0x485); /* BIOS: font size (pixels) */ + rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */ + + rows *= font_size; /* Visible scan lines */ + rows--; /* ... minus one */ + + crtc = vga_crtc(); + + out_idx((u8)rows, crtc, 0x12); /* Lower height register */ + ov = in_idx(crtc, 0x07); /* Overflow register */ + ov &= 0xbd; + ov |= (rows >> (8-1)) & 0x02; + ov |= (rows >> (9-6)) & 0x40; + out_idx(ov, crtc, 0x07); +} + +/* Set mode (with recalc if specified) */ +static int set_mode(u16 mode) +{ + int rv; + + /* Very special mode numbers... */ + if (mode == VIDEO_CURRENT_MODE) + return 0; /* Nothing to do... */ + else if (mode == NORMAL_VGA) + mode = VIDEO_80x25; + else if (mode == EXTENDED_VGA) + mode = VIDEO_8POINT; + + rv = raw_set_mode(mode); + if (rv) + return rv; + + if (mode & VIDEO_RECALC) + vga_recalc_vertical(); + + return 0; +} + +static unsigned int get_entry(void) +{ + char entry_buf[4]; + int i, len = 0; + int key; + unsigned int v; + + do { + key = getchar(); + + if (key == '\b') { + if (len > 0) { + puts("\b \b"); + len--; + } + } else if ((key >= '0' && key <= '9') || + (key >= 'A' && key <= 'Z') || + (key >= 'a' && key <= 'z')) { + if (len < sizeof entry_buf) { + entry_buf[len++] = key; + putchar(key); + } + } + } while (key != '\r'); + putchar('\n'); + + if (len == 0) + return VIDEO_CURRENT_MODE; /* Default */ + + v = 0; + for (i = 0; i < len; i++) { + v <<= 4; + key = entry_buf[i] | 0x20; + v += (key > '9') ? key-'a'+10 : key-'0'; + } + + return v; +} + +static void display_menu(void) +{ + struct card_info *card; + struct mode_info *mi; + char ch; + int i; + + puts("Mode: COLSxROWS:\n"); + + ch = '0'; + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + int visible = mi->x && mi->y; + u16 mode_id = mi->mode ? mi->mode : + (mi->y << 8)+mi->x; + + if (!visible) + continue; /* Hidden mode */ + + printf("%c %04X %3dx%-3d %s\n", + ch, mode_id, mi->x, mi->y, card->card_name); + + if (ch == '9') + ch = 'a'; + else if (ch == 'z' || ch == ' ') + ch = ' '; /* Out of keys... */ + else + ch++; + } + } +} + +#define H(x) ((x)-'a'+10) +#define SCAN ((H('s')<<12)+(H('c')<<8)+(H('a')<<4)+H('n')) + +static unsigned int mode_menu(void) +{ + int key; + unsigned int sel; + + puts("Press <ENTER> to see video modes available, " + "<SPACE> to continue, or wait 30 sec\n"); + + kbd_flush(); + while (1) { + key = getchar_timeout(); + if (key == ' ' || key == 0) + return VIDEO_CURRENT_MODE; /* Default */ + if (key == '\r') + break; + putchar('\a'); /* Beep! */ + } + + + for (;;) { + display_menu(); + + puts("Enter a video mode or \"scan\" to scan for " + "additional modes: "); + sel = get_entry(); + if (sel != SCAN) + return sel; + + probe_cards(1); + } +} + +#ifdef CONFIG_VIDEO_RETAIN +/* Save screen content to the heap */ +struct saved_screen { + int x, y; + int curx, cury; + u16 *data; +} saved; + +static void save_screen(void) +{ + /* Should be called after store_mode_params() */ + saved.x = boot_params.screen_info.orig_video_cols; + saved.y = boot_params.screen_info.orig_video_lines; + saved.curx = boot_params.screen_info.orig_x; + saved.cury = boot_params.screen_info.orig_y; + + if (heap_free() < saved.x*saved.y*sizeof(u16)+512) + return; /* Not enough heap to save the screen */ + + saved.data = GET_HEAP(u16, saved.x*saved.y); + + set_fs(video_segment); + copy_from_fs(saved.data, 0, saved.x*saved.y*sizeof(u16)); +} + +static void restore_screen(void) +{ + /* Should be called after store_mode_params() */ + int xs = boot_params.screen_info.orig_video_cols; + int ys = boot_params.screen_info.orig_video_lines; + int y; + addr_t dst = 0; + u16 *src = saved.data; + u16 ax, bx, dx; + + if (graphic_mode) + return; /* Can't restore onto a graphic mode */ + + if (!src) + return; /* No saved screen contents */ + + /* Restore screen contents */ + + set_fs(video_segment); + for (y = 0; y < ys; y++) { + int npad; + + if (y < saved.y) { + int copy = (xs < saved.x) ? xs : saved.x; + copy_to_fs(dst, src, copy*sizeof(u16)); + dst += copy*sizeof(u16); + src += saved.x; + npad = (xs < saved.x) ? 0 : xs-saved.x; + } else { + npad = xs; + } + + /* Writes "npad" blank characters to + video_segment:dst and advances dst */ + asm volatile("pushw %%es ; " + "movw %2,%%es ; " + "shrw %%cx ; " + "jnc 1f ; " + "stosw \n\t" + "1: rep;stosl ; " + "popw %%es" + : "+D" (dst), "+c" (npad) + : "bdSm" (video_segment), + "a" (0x07200720)); + } + + /* Restore cursor position */ + ax = 0x0200; /* Set cursor position */ + bx = 0; /* Page number (<< 8) */ + dx = (saved.cury << 8)+saved.curx; + asm volatile(INT10 + : "+a" (ax), "+b" (bx), "+d" (dx) + : : "ecx", "esi", "edi"); +} +#else +#define save_screen() ((void)0) +#define restore_screen() ((void)0) +#endif + +void set_video(void) +{ + u16 mode = boot_params.hdr.vid_mode; + + RESET_HEAP(); + + store_mode_params(); + save_screen(); + probe_cards(0); + + for (;;) { + if (mode == ASK_VGA) + mode = mode_menu(); + + if (!set_mode(mode)) + break; + + printf("Undefined video mode number: %x\n", mode); + mode = ASK_VGA; + } + vesa_store_edid(); + store_mode_params(); + + if (do_restore) + restore_screen(); +} diff --git a/arch/i386/boot/video.h b/arch/i386/boot/video.h new file mode 100644 index 000000000000..29eca1710b2c --- /dev/null +++ b/arch/i386/boot/video.h @@ -0,0 +1,145 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video.h + * + * Header file for the real-mode video probing code + */ + +#ifndef BOOT_VIDEO_H +#define BOOT_VIDEO_H + +#include <linux/types.h> + +/* Enable autodetection of SVGA adapters and modes. */ +#undef CONFIG_VIDEO_SVGA + +/* Enable autodetection of VESA modes */ +#define CONFIG_VIDEO_VESA + +/* Retain screen contents when switching modes */ +#define CONFIG_VIDEO_RETAIN + +/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */ +#undef CONFIG_VIDEO_400_HACK + +/* This code uses an extended set of video mode numbers. These include: + * Aliases for standard modes + * NORMAL_VGA (-1) + * EXTENDED_VGA (-2) + * ASK_VGA (-3) + * Video modes numbered by menu position -- NOT RECOMMENDED because of lack + * of compatibility when extending the table. These are between 0x00 and 0xff. + */ +#define VIDEO_FIRST_MENU 0x0000 + +/* Standard BIOS video modes (BIOS number + 0x0100) */ +#define VIDEO_FIRST_BIOS 0x0100 + +/* VESA BIOS video modes (VESA number + 0x0200) */ +#define VIDEO_FIRST_VESA 0x0200 + +/* Video7 special modes (BIOS number + 0x0900) */ +#define VIDEO_FIRST_V7 0x0900 + +/* Special video modes */ +#define VIDEO_FIRST_SPECIAL 0x0f00 +#define VIDEO_80x25 0x0f00 +#define VIDEO_8POINT 0x0f01 +#define VIDEO_80x43 0x0f02 +#define VIDEO_80x28 0x0f03 +#define VIDEO_CURRENT_MODE 0x0f04 +#define VIDEO_80x30 0x0f05 +#define VIDEO_80x34 0x0f06 +#define VIDEO_80x60 0x0f07 +#define VIDEO_GFX_HACK 0x0f08 +#define VIDEO_LAST_SPECIAL 0x0f09 + +/* Video modes given by resolution */ +#define VIDEO_FIRST_RESOLUTION 0x1000 + +/* The "recalculate timings" flag */ +#define VIDEO_RECALC 0x8000 + +/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ +#ifdef CONFIG_VIDEO_RETAIN +void store_screen(void); +#define DO_STORE() store_screen() +#else +#define DO_STORE() ((void)0) +#endif /* CONFIG_VIDEO_RETAIN */ + +/* + * Mode table structures + */ + +struct mode_info { + u16 mode; /* Mode number (vga= style) */ + u8 x, y; /* Width, height */ +}; + +struct card_info { + const char *card_name; + int (*set_mode)(struct mode_info *mode); + int (*probe)(void); + struct mode_info *modes; + int nmodes; /* Number of probed modes so far */ + int unsafe; /* Probing is unsafe, only do after "scan" */ + u16 xmode_first; /* Unprobed modes to try to call anyway */ + u16 xmode_n; /* Size of unprobed mode range */ +}; + +#define __videocard struct card_info __attribute__((section(".videocards"))) +extern struct card_info video_cards[], video_cards_end[]; + +int mode_defined(u16 mode); /* video.c */ + +/* Basic video information */ +#define ADAPTER_CGA 0 /* CGA/MDA/HGC */ +#define ADAPTER_EGA 1 +#define ADAPTER_VGA 2 + +extern int adapter; +extern u16 video_segment; +extern int force_x, force_y; /* Don't query the BIOS for cols/rows */ +extern int do_restore; /* Restore screen contents */ +extern int graphic_mode; /* Graphics mode with linear frame buffer */ + +/* + * int $0x10 is notorious for touching registers it shouldn't. + * gcc doesn't like %ebp being clobbered, so define it as a push/pop + * sequence here. + */ +#define INT10 "pushl %%ebp; int $0x10; popl %%ebp" + +/* Accessing VGA indexed registers */ +static inline u8 in_idx(u16 port, u8 index) +{ + outb(index, port); + return inb(port+1); +} + +static inline void out_idx(u8 v, u16 port, u8 index) +{ + outw(index+(v << 8), port); +} + +/* Writes a value to an indexed port and then reads the port again */ +static inline u8 tst_idx(u8 v, u16 port, u8 index) +{ + out_idx(port, index, v); + return in_idx(port, index); +} + +/* Get the I/O port of the VGA CRTC */ +u16 vga_crtc(void); /* video-vga.c */ + +#endif /* BOOT_VIDEO_H */ diff --git a/arch/i386/boot/voyager.c b/arch/i386/boot/voyager.c new file mode 100644 index 000000000000..9221614d0db8 --- /dev/null +++ b/arch/i386/boot/voyager.c @@ -0,0 +1,46 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/voyager.c + * + * Get the Voyager config information + */ + +#include "boot.h" + +#ifdef CONFIG_X86_VOYAGER + +int query_voyager(void) +{ + u8 err; + u16 es, di; + /* Abuse the apm_bios_info area for this */ + u8 *data_ptr = (u8 *)&boot_params.apm_bios_info; + + data_ptr[0] = 0xff; /* Flag on config not found(?) */ + + asm("pushw %%es ; " + "int $0x15 ; " + "setc %0 ; " + "movw %%es, %1 ; " + "popw %%es" + : "=qm" (err), "=rm" (es), "=D" (di) + : "a" (0xffc0)); + + if (err) + return -1; /* Not Voyager */ + + set_fs(es); + copy_from_fs(data_ptr, di, 7); /* Table is 7 bytes apparently */ + return 0; +} + +#endif /* CONFIG_X86_VOYAGER */ diff --git a/arch/i386/kernel/cpu/Makefile b/arch/i386/kernel/cpu/Makefile index 74f27a463db0..0b6a8551e9e2 100644 --- a/arch/i386/kernel/cpu/Makefile +++ b/arch/i386/kernel/cpu/Makefile @@ -8,7 +8,7 @@ obj-y += amd.o obj-y += cyrix.o obj-y += centaur.o obj-y += transmeta.o -obj-y += intel.o intel_cacheinfo.o +obj-y += intel.o intel_cacheinfo.o addon_cpuid_features.o obj-y += rise.o obj-y += nexgen.o obj-y += umc.o diff --git a/arch/i386/kernel/cpu/addon_cpuid_features.c b/arch/i386/kernel/cpu/addon_cpuid_features.c new file mode 100644 index 000000000000..3e91d3ee26ec --- /dev/null +++ b/arch/i386/kernel/cpu/addon_cpuid_features.c @@ -0,0 +1,50 @@ + +/* + * Routines to indentify additional cpu features that are scattered in + * cpuid space. + */ + +#include <linux/cpu.h> + +#include <asm/processor.h> + +struct cpuid_bit { + u16 feature; + u8 reg; + u8 bit; + u32 level; +}; + +enum cpuid_regs { + CR_EAX = 0, + CR_ECX, + CR_EDX, + CR_EBX +}; + +void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) +{ + u32 max_level; + u32 regs[4]; + const struct cpuid_bit *cb; + + static const struct cpuid_bit cpuid_bits[] = { + { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, + { 0, 0, 0, 0 } + }; + + for (cb = cpuid_bits; cb->feature; cb++) { + + /* Verify that the level is valid */ + max_level = cpuid_eax(cb->level & 0xffff0000); + if (max_level < cb->level || + max_level > (cb->level | 0xffff)) + continue; + + cpuid(cb->level, ®s[CR_EAX], ®s[CR_EBX], + ®s[CR_ECX], ®s[CR_EDX]); + + if (regs[cb->reg] & (1 << cb->bit)) + set_bit(cb->feature, c->x86_capability); + } +} diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 794d593c47eb..e5419a9dec88 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -353,6 +353,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 * c) if ( xlvl >= 0x80000004 ) get_model_name(c); /* Default name */ } + + init_scattered_cpuid_features(c); } early_intel_workaround(c); diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index e912aae9473c..094118ba00da 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -90,10 +90,17 @@ config X86_POWERNOW_K8 If in doubt, say N. config X86_POWERNOW_K8_ACPI - bool - depends on X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) + bool "ACPI Support" + select ACPI_PROCESSOR + depends on X86_POWERNOW_K8 default y + help + This provides access to the K8s Processor Performance States via ACPI. + This driver is probably required for CPUFreq to work with multi-socket and + SMP systems. It is not required on at least some single-socket yet + multi-core systems, even if SMP is enabled. + + It is safe to say Y here. config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" @@ -109,7 +116,7 @@ config X86_GX_SUSPMOD config X86_SPEEDSTEP_CENTRINO tristate "Intel Enhanced SpeedStep" select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI) + select X86_SPEEDSTEP_CENTRINO_TABLE help This adds the CPUFreq driver for Enhanced SpeedStep enabled mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, @@ -121,20 +128,6 @@ config X86_SPEEDSTEP_CENTRINO If in doubt, say N. -config X86_SPEEDSTEP_CENTRINO_ACPI - bool "Use ACPI tables to decode valid frequency/voltage (deprecated)" - depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR - depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m) - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - Use primarily the information provided in the BIOS ACPI tables - to determine valid CPU frequency and voltage pairings. It is - required for the driver to work on non-Banias CPUs. - - If in doubt, say Y. - config X86_SPEEDSTEP_CENTRINO_TABLE bool "Built-in tables for Banias CPUs" depends on X86_SPEEDSTEP_CENTRINO @@ -230,7 +223,7 @@ comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF bool "/proc/acpi/processor/../performance interface (deprecated)" depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI help This enables the deprecated /proc/acpi/processor/../performance interface. While it is helpful for debugging, the generic, diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 10baa3501ed3..18c8b67ea3a7 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -167,11 +167,13 @@ static void do_drv_read(struct drv_cmd *cmd) static void do_drv_write(struct drv_cmd *cmd) { - u32 h = 0; + u32 lo, hi; switch (cmd->type) { case SYSTEM_INTEL_MSR_CAPABLE: - wrmsr(cmd->addr.msr.reg, cmd->val, h); + rdmsr(cmd->addr.msr.reg, lo, hi); + lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); + wrmsr(cmd->addr.msr.reg, lo, hi); break; case SYSTEM_IO_CAPABLE: acpi_os_write_port((acpi_io_address)cmd->addr.io.port, @@ -372,7 +374,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; cpumask_t online_policy_cpus; struct drv_cmd cmd; - unsigned int msr; unsigned int next_state = 0; /* Index into freq_table */ unsigned int next_perf_state = 0; /* Index into perf table */ unsigned int i; @@ -417,11 +418,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, case SYSTEM_INTEL_MSR_CAPABLE: cmd.type = SYSTEM_INTEL_MSR_CAPABLE; cmd.addr.msr.reg = MSR_IA32_PERF_CTL; - msr = - (u32) perf->states[next_perf_state]. - control & INTEL_MSR_RANGE; - cmd.val = get_cur_val(online_policy_cpus); - cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr; + cmd.val = (u32) perf->states[next_perf_state].control; break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c index 0d49d73d1b71..66acd5039918 100644 --- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -391,8 +391,6 @@ static struct cpufreq_driver nforce2_driver = { */ static unsigned int nforce2_detect_chipset(void) { - u8 revision; - nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, PCI_ANY_ID, PCI_ANY_ID, NULL); @@ -400,10 +398,8 @@ static unsigned int nforce2_detect_chipset(void) if (nforce2_chipset_dev == NULL) return -ENODEV; - pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision); - printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", - revision); + nforce2_chipset_dev->revision); printk(KERN_INFO "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index 6667e9cceb9f..194144539a6f 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -115,7 +115,6 @@ struct gxfreq_params { u8 pci_suscfg; u8 pci_pmer1; u8 pci_pmer2; - u8 pci_rev; struct pci_dev *cs55x0; }; @@ -276,7 +275,7 @@ static void gx_set_cpuspeed(unsigned int khz) pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */ pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1); - if (gx_params->pci_rev < 0x10) { /* CS5530(rev 1.2, 1.3) */ + if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */ suscfg = gx_params->pci_suscfg | SUSMOD; } else { /* CS5530A,B.. */ suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE; @@ -471,7 +470,6 @@ static int __init cpufreq_gx_init(void) pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration)); - pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, ¶ms->pci_rev); if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { kfree(params); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index a3df9c039bd4..ef8f0bc3fc71 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,6 +29,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/delay.h> #include <asm/msr.h> #include <asm/timex.h> @@ -55,7 +56,6 @@ /* Flags */ #define USE_ACPI_C3 (1 << 1) #define USE_NORTHBRIDGE (1 << 2) -#define USE_VT8235 (1 << 3) static int cpu_model; static unsigned int numscales=16; @@ -63,22 +63,19 @@ static unsigned int fsb; static const struct mV_pos *vrm_mV_table; static const unsigned char *mV_vrm_table; -struct f_msr { - u8 vrm; - u8 pos; -}; -static struct f_msr f_msr_table[32]; static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; +static u32 acpi_regs_addr; static u8 longhaul_flags; -static u8 longhaul_pos; +static unsigned int longhaul_index; /* Module parameters */ static int scale_voltage; +static int disable_acpi_c3; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) @@ -144,7 +141,7 @@ static void do_longhaul1(unsigned int clock_ratio_index) rdmsrl(MSR_VIA_BCR2, bcr2.val); /* Enable software clock multiplier */ bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index; + bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; /* Sync to timer tick */ safe_halt(); @@ -163,14 +160,12 @@ static void do_longhaul1(unsigned int clock_ratio_index) /* For processor with Longhaul MSR */ -static void do_powersaver(int cx_address, unsigned int clock_ratio_index) +static void do_powersaver(int cx_address, unsigned int clock_ratio_index, + unsigned int dir) { union msr_longhaul longhaul; - u8 dest_pos; u32 t; - dest_pos = f_msr_table[clock_ratio_index].pos; - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Setup new frequency */ longhaul.bits.RevisionKey = longhaul.bits.RevisionID; @@ -178,11 +173,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; /* Setup new voltage */ if (can_scale_voltage) - longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; /* Sync to timer tick */ safe_halt(); /* Raise voltage if necessary */ - if (can_scale_voltage && longhaul_pos < dest_pos) { + if (can_scale_voltage && dir) { longhaul.bits.EnableSoftVID = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Change voltage */ @@ -199,7 +194,6 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) } longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - longhaul_pos = dest_pos; } /* Change frequency on next halt or sleep */ @@ -220,7 +214,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Reduce voltage if necessary */ - if (can_scale_voltage && longhaul_pos > dest_pos) { + if (can_scale_voltage && !dir) { longhaul.bits.EnableSoftVID = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Change voltage */ @@ -237,7 +231,6 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) } longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - longhaul_pos = dest_pos; } } @@ -248,25 +241,28 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) * Sets a new clock ratio. */ -static void longhaul_setstate(unsigned int clock_ratio_index) +static void longhaul_setstate(unsigned int table_index) { + unsigned int clock_ratio_index; int speed, mult; struct cpufreq_freqs freqs; - static unsigned int old_ratio=-1; unsigned long flags; unsigned int pic1_mask, pic2_mask; + u16 bm_status = 0; + u32 bm_timeout = 1000; + unsigned int dir = 0; - if (old_ratio == clock_ratio_index) - return; - old_ratio = clock_ratio_index; - - mult = clock_ratio[clock_ratio_index]; + clock_ratio_index = longhaul_table[table_index].index; + /* Safety precautions */ + mult = clock_ratio[clock_ratio_index & 0x1f]; if (mult == -1) return; - speed = calc_speed(mult); if ((speed > highest_speed) || (speed < lowest_speed)) return; + /* Voltage transition before frequency transition? */ + if (can_scale_voltage && longhaul_index < table_index) + dir = 1; freqs.old = calc_speed(longhaul_get_cpu_mult()); freqs.new = speed; @@ -285,11 +281,24 @@ static void longhaul_setstate(unsigned int clock_ratio_index) outb(0xFF,0xA1); /* Overkill */ outb(0xFE,0x21); /* TMR0 only */ + /* Wait while PCI bus is busy. */ + if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE + || ((pr != NULL) && pr->flags.bm_control))) { + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + while (bm_status && bm_timeout) { + outw(1 << 4, acpi_regs_addr); + bm_timeout--; + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + } + } + if (longhaul_flags & USE_NORTHBRIDGE) { /* Disable AGP and PCI arbiters */ outb(3, 0x22); } else if ((pr != NULL) && pr->flags.bm_control) { - /* Disable bus master arbitration */ + /* Disable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); } switch (longhaul_version) { @@ -314,9 +323,9 @@ static void longhaul_setstate(unsigned int clock_ratio_index) if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, clock_ratio_index); + do_powersaver(cx->address, clock_ratio_index, dir); } else { - do_powersaver(0, clock_ratio_index); + do_powersaver(0, clock_ratio_index, dir); } break; } @@ -336,6 +345,9 @@ static void longhaul_setstate(unsigned int clock_ratio_index) freqs.new = calc_speed(longhaul_get_cpu_mult()); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + if (!bm_timeout) + printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); } /* @@ -369,7 +381,8 @@ static int guess_fsb(int mult) static int __init longhaul_get_ranges(void) { - unsigned int j, k = 0; + unsigned int i, j, k = 0; + unsigned int ratio; int mult; /* Get current frequency */ @@ -423,8 +436,7 @@ static int __init longhaul_get_ranges(void) if(!longhaul_table) return -ENOMEM; - for (j=0; j < numscales; j++) { - unsigned int ratio; + for (j = 0; j < numscales; j++) { ratio = clock_ratio[j]; if (ratio == -1) continue; @@ -434,13 +446,41 @@ static int __init longhaul_get_ranges(void) longhaul_table[k].index = j; k++; } + if (k <= 1) { + kfree(longhaul_table); + return -ENODEV; + } + /* Sort */ + for (j = 0; j < k - 1; j++) { + unsigned int min_f, min_i; + min_f = longhaul_table[j].frequency; + min_i = j; + for (i = j + 1; i < k; i++) { + if (longhaul_table[i].frequency < min_f) { + min_f = longhaul_table[i].frequency; + min_i = i; + } + } + if (min_i != j) { + unsigned int temp; + temp = longhaul_table[j].frequency; + longhaul_table[j].frequency = longhaul_table[min_i].frequency; + longhaul_table[min_i].frequency = temp; + temp = longhaul_table[j].index; + longhaul_table[j].index = longhaul_table[min_i].index; + longhaul_table[min_i].index = temp; + } + } longhaul_table[k].frequency = CPUFREQ_TABLE_END; - if (!k) { - kfree (longhaul_table); - return -EINVAL; - } + /* Find index we are running on */ + for (j = 0; j < k; j++) { + if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { + longhaul_index = j; + break; + } + } return 0; } @@ -448,7 +488,7 @@ static int __init longhaul_get_ranges(void) static void __init longhaul_setup_voltagescaling(void) { union msr_longhaul longhaul; - struct mV_pos minvid, maxvid; + struct mV_pos minvid, maxvid, vid; unsigned int j, speed, pos, kHz_step, numvscales; int min_vid_speed; @@ -459,11 +499,11 @@ static void __init longhaul_setup_voltagescaling(void) } if (!longhaul.bits.VRMRev) { - printk (KERN_INFO PFX "VRM 8.5\n"); + printk(KERN_INFO PFX "VRM 8.5\n"); vrm_mV_table = &vrm85_mV[0]; mV_vrm_table = &mV_vrm85[0]; } else { - printk (KERN_INFO PFX "Mobile VRM\n"); + printk(KERN_INFO PFX "Mobile VRM\n"); if (cpu_model < CPU_NEHEMIAH) return; vrm_mV_table = &mobilevrm_mV[0]; @@ -523,7 +563,6 @@ static void __init longhaul_setup_voltagescaling(void) /* Calculate kHz for one voltage step */ kHz_step = (highest_speed - min_vid_speed) / numvscales; - j = 0; while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { speed = longhaul_table[j].frequency; @@ -531,15 +570,14 @@ static void __init longhaul_setup_voltagescaling(void) pos = (speed - min_vid_speed) / kHz_step + minvid.pos; else pos = minvid.pos; - f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; - f_msr_table[longhaul_table[j].index].pos = pos; + longhaul_table[j].index |= mV_vrm_table[pos] << 8; + vid = vrm_mV_table[mV_vrm_table[pos]]; + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); j++; } - longhaul_pos = maxvid.pos; can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled. " - "Use of \"conservative\" governor is highly recommended.\n"); + printk(KERN_INFO PFX "Voltage scaling enabled.\n"); } @@ -553,15 +591,44 @@ static int longhaul_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int table_index = 0; - unsigned int new_clock_ratio = 0; + unsigned int i; + unsigned int dir = 0; + u8 vid, current_vid; if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) return -EINVAL; - new_clock_ratio = longhaul_table[table_index].index & 0xFF; - - longhaul_setstate(new_clock_ratio); + /* Don't set same frequency again */ + if (longhaul_index == table_index) + return 0; + if (!can_scale_voltage) + longhaul_setstate(table_index); + else { + /* On test system voltage transitions exceeding single + * step up or down were turning motherboard off. Both + * "ondemand" and "userspace" are unsafe. C7 is doing + * this in hardware, C3 is old and we need to do this + * in software. */ + i = longhaul_index; + current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; + if (table_index > longhaul_index) + dir = 1; + while (i != table_index) { + vid = (longhaul_table[i].index >> 8) & 0x1f; + if (vid != current_vid) { + longhaul_setstate(i); + current_vid = vid; + msleep(200); + } + if (dir) + i++; + else + i--; + } + longhaul_setstate(table_index); + } + longhaul_index = table_index; return 0; } @@ -590,11 +657,10 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, static int enable_arbiter_disable(void) { struct pci_dev *dev; - int status; + int status = 1; int reg; u8 pci_cmd; - status = 1; /* Find PLE133 host bridge */ reg = 0x78; dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, @@ -627,13 +693,17 @@ static int enable_arbiter_disable(void) return 0; } -static int longhaul_setup_vt8235(void) +static int longhaul_setup_southbridge(void) { struct pci_dev *dev; u8 pci_cmd; /* Find VT8235 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev == NULL) + /* Find VT8237 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8237, NULL); if (dev != NULL) { /* Set transition time to max */ pci_read_config_byte(dev, 0xec, &pci_cmd); @@ -645,6 +715,14 @@ static int longhaul_setup_vt8235(void) pci_read_config_byte(dev, 0xe5, &pci_cmd); pci_cmd |= 1 << 7; pci_write_config_byte(dev, 0xe5, pci_cmd); + /* Get address of ACPI registers block*/ + pci_read_config_byte(dev, 0x81, &pci_cmd); + if (pci_cmd & 1 << 7) { + pci_read_config_dword(dev, 0x88, &acpi_regs_addr); + acpi_regs_addr &= 0xff00; + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); + } + pci_dev_put(dev); return 1; } @@ -657,7 +735,6 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) char *cpuname=NULL; int ret; u32 lo, hi; - int vt8235_present; /* Check what we have on this motherboard */ switch (c->x86_model) { @@ -755,7 +832,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) }; /* Doesn't hurt */ - vt8235_present = longhaul_setup_vt8235(); + longhaul_setup_southbridge(); /* Find ACPI data for processor */ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, @@ -765,35 +842,29 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Check ACPI support for C3 state */ if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && cx->latency <= 1000) { + if (cx->address > 0 && cx->latency <= 1000) longhaul_flags |= USE_ACPI_C3; - goto print_support_type; - } } + /* Disable if it isn't working */ + if (disable_acpi_c3) + longhaul_flags &= ~USE_ACPI_C3; /* Check if northbridge is friendly */ - if (enable_arbiter_disable()) { + if (enable_arbiter_disable()) longhaul_flags |= USE_NORTHBRIDGE; - goto print_support_type; - } - /* Use VT8235 southbridge if present */ - if (longhaul_version == TYPE_POWERSAVER && vt8235_present) { - longhaul_flags |= USE_VT8235; - goto print_support_type; - } + /* Check ACPI support for bus master arbiter disable */ - if ((pr == NULL) || !(pr->flags.bm_control)) { + if (!(longhaul_flags & USE_ACPI_C3 + || longhaul_flags & USE_NORTHBRIDGE) + && ((pr == NULL) || !(pr->flags.bm_control))) { printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge.\n"); return -ENODEV; } -print_support_type: if (longhaul_flags & USE_NORTHBRIDGE) - printk (KERN_INFO PFX "Using northbridge support.\n"); - else if (longhaul_flags & USE_VT8235) - printk (KERN_INFO PFX "Using VT8235 support.\n"); - else - printk (KERN_INFO PFX "Using ACPI support.\n"); + printk(KERN_INFO PFX "Using northbridge support.\n"); + if (longhaul_flags & USE_ACPI_C3) + printk(KERN_INFO PFX "Using ACPI support.\n"); ret = longhaul_get_ranges(); if (ret != 0) @@ -885,6 +956,9 @@ static void __exit longhaul_exit(void) kfree(longhaul_table); } +module_param (disable_acpi_c3, int, 0644); +MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); + module_param (scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index 102548f12842..4fcc320997df 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -180,7 +180,7 @@ static const int __initdata ezrat_clock_ratio[32] = { -1, /* 0000 -> RESERVED (10.0x) */ 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ + -1, /* 0010 -> 12.0x */ -1, /* 0011 -> RESERVED (9.0x)*/ 105, /* 0100 -> 10.5x */ 115, /* 0101 -> 11.5x */ @@ -237,7 +237,7 @@ static const int __initdata ezrat_eblcr[32] = { static const int __initdata nehemiah_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ + -1, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ 90, /* 0011 -> 9.0x */ 95, /* 0100 -> 9.5x */ @@ -252,10 +252,10 @@ static const int __initdata nehemiah_clock_ratio[32] = { 75, /* 1101 -> 7.5x */ 85, /* 1110 -> 8.5x */ 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ + -1, /* 0000 -> 10.0x */ 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> 9.0x */ 105, /* 0100 -> 10.5x */ 115, /* 0101 -> 11.5x */ 125, /* 0110 -> 12.5x */ @@ -267,7 +267,7 @@ static const int __initdata nehemiah_clock_ratio[32] = { 145, /* 1100 -> 14.5x */ 155, /* 1101 -> 15.5x */ -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ + -1, /* 1111 -> 12.0x */ }; static const int __initdata nehemiah_eblcr[32] = { diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 4ade55c5f333..34ed53a06730 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -599,14 +599,17 @@ static void print_basics(struct powernow_k8_data *data) for (j = 0; j < data->numps; j++) { if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX " %d : fid 0x%x gid 0x%x (%d MHz)\n", j, (data->powernow_table[j].index & 0xff00) >> 8, - (data->powernow_table[j].index & 0xff0000) >> 16, - data->powernow_table[j].frequency/1000); + printk(KERN_INFO PFX " %d : fid 0x%x did 0x%x (%d MHz)\n", + j, + (data->powernow_table[j].index & 0xff00) >> 8, + (data->powernow_table[j].index & 0xff0000) >> 16, + data->powernow_table[j].frequency/1000); } else { - printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", j, - data->powernow_table[j].index & 0xff, - data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); + printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", + j, + data->powernow_table[j].index & 0xff, + data->powernow_table[j].frequency/1000, + data->powernow_table[j].index >> 8); } } } @@ -1086,7 +1089,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi if (cpu_family == CPU_HW_PSTATE) dprintk("targ: curr fid 0x%x, did 0x%x\n", - data->currfid, data->currvid); + data->currfid, data->currdid); else { dprintk("targ: curr fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1322,16 +1325,22 @@ static struct cpufreq_driver cpufreq_amd64_driver = { static int __cpuinit powernowk8_init(void) { unsigned int i, supported_cpus = 0; + unsigned int booted_cores = 1; for_each_online_cpu(i) { if (check_supported_cpu(i)) supported_cpus++; } +#ifdef CONFIG_SMP + booted_cores = cpu_data[0].booted_cores; +#endif + if (supported_cpus == num_online_cpus()) { printk(KERN_INFO PFX "Found %d %s " - "processors (" VERSION ")\n", supported_cpus, - boot_cpu_data.x86_model_id); + "processors (%d cpu cores) (" VERSION ")\n", + supported_cpus/booted_cores, + boot_cpu_data.x86_model_id, supported_cpus); return cpufreq_register_driver(&cpufreq_amd64_driver); } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 35489fd68852..6c5dc2c85aeb 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -21,12 +21,6 @@ #include <linux/delay.h> #include <linux/compiler.h> -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI -#include <linux/acpi.h> -#include <linux/dmi.h> -#include <acpi/processor.h> -#endif - #include <asm/msr.h> #include <asm/processor.h> #include <asm/cpufeature.h> @@ -257,9 +251,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) /* Matched a non-match */ dprintk("no table support for CPU model \"%s\"\n", cpu->x86_model_id); -#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - dprintk("try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); -#endif + dprintk("try using the acpi-cpufreq driver\n"); return -ENOENT; } @@ -346,213 +338,6 @@ static unsigned int get_cur_freq(unsigned int cpu) } -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - -static struct acpi_processor_performance *acpi_perf_data[NR_CPUS]; - -/* - * centrino_cpu_early_init_acpi - Do the preregistering with ACPI P-States - * library - * - * Before doing the actual init, we need to do _PSD related setup whenever - * supported by the BIOS. These are handled by this early_init routine. - */ -static int centrino_cpu_early_init_acpi(void) -{ - unsigned int i, j; - struct acpi_processor_performance *data; - - for_each_possible_cpu(i) { - data = kzalloc(sizeof(struct acpi_processor_performance), - GFP_KERNEL); - if (!data) { - for_each_possible_cpu(j) { - kfree(acpi_perf_data[j]); - acpi_perf_data[j] = NULL; - } - return (-ENOMEM); - } - acpi_perf_data[i] = data; - } - - acpi_processor_preregister_performance(acpi_perf_data); - return 0; -} - - -#ifdef CONFIG_SMP -/* - * Some BIOSes do SW_ANY coordination internally, either set it up in hw - * or do it in BIOS firmware and won't inform about it to OS. If not - * detected, this has a side effect of making CPU run at a different speed - * than OS intended it to run at. Detect it and handle it cleanly. - */ -static int bios_with_sw_any_bug; -static int sw_any_bug_found(struct dmi_system_id *d) -{ - bios_with_sw_any_bug = 1; - return 0; -} - -static struct dmi_system_id sw_any_bug_dmi_table[] = { - { - .callback = sw_any_bug_found, - .ident = "Supermicro Server X6DLP", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_BIOS_VERSION, "080010"), - DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), - }, - }, - { } -}; -#endif - -/* - * centrino_cpu_init_acpi - register with ACPI P-States library - * - * Register with the ACPI P-States library (part of drivers/acpi/processor.c) - * in order to determine correct frequency and voltage pairings by reading - * the _PSS of the ACPI DSDT or SSDT tables. - */ -static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) -{ - unsigned long cur_freq; - int result = 0, i; - unsigned int cpu = policy->cpu; - struct acpi_processor_performance *p; - - p = acpi_perf_data[cpu]; - - /* register with ACPI core */ - if (acpi_processor_register_performance(p, cpu)) { - dprintk(PFX "obtaining ACPI data failed\n"); - return -EIO; - } - - policy->shared_type = p->shared_type; - /* - * Will let policy->cpus know about dependency only when software - * coordination is required. - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || - policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - policy->cpus = p->shared_cpu_map; - } - -#ifdef CONFIG_SMP - dmi_check_system(sw_any_bug_dmi_table); - if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) { - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - policy->cpus = cpu_core_map[cpu]; - } -#endif - - /* verify the acpi_data */ - if (p->state_count <= 1) { - dprintk("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if ((p->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (p->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Invalid control/status registers (%x - %x)\n", - p->control_register.space_id, p->status_register.space_id); - result = -EIO; - goto err_unreg; - } - - for (i=0; i<p->state_count; i++) { - if ((p->states[i].control & INTEL_MSR_RANGE) != - (p->states[i].status & INTEL_MSR_RANGE)) { - dprintk("Different MSR bits in control (%llu) and status (%llu)\n", - p->states[i].control, p->states[i].status); - result = -EINVAL; - goto err_unreg; - } - - if (!p->states[i].core_frequency) { - dprintk("Zero core frequency for state %u\n", i); - result = -EINVAL; - goto err_unreg; - } - - if (p->states[i].core_frequency > p->states[0].core_frequency) { - dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i, - p->states[i].core_frequency, p->states[0].core_frequency); - p->states[i].core_frequency = 0; - continue; - } - } - - centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL); - if (!centrino_model[cpu]) { - result = -ENOMEM; - goto err_unreg; - } - - centrino_model[cpu]->model_name=NULL; - centrino_model[cpu]->max_freq = p->states[0].core_frequency * 1000; - centrino_model[cpu]->op_points = kmalloc(sizeof(struct cpufreq_frequency_table) * - (p->state_count + 1), GFP_KERNEL); - if (!centrino_model[cpu]->op_points) { - result = -ENOMEM; - goto err_kfree; - } - - for (i=0; i<p->state_count; i++) { - centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE; - centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000; - dprintk("adding state %i with frequency %u and control value %04x\n", - i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index); - } - centrino_model[cpu]->op_points[p->state_count].frequency = CPUFREQ_TABLE_END; - - cur_freq = get_cur_freq(cpu); - - for (i=0; i<p->state_count; i++) { - if (!p->states[i].core_frequency) { - dprintk("skipping state %u\n", i); - centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - - if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) != - (centrino_model[cpu]->op_points[i].frequency)) { - dprintk("Invalid encoded frequency (%u vs. %u)\n", - extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0), - centrino_model[cpu]->op_points[i].frequency); - result = -EINVAL; - goto err_kfree_all; - } - - if (cur_freq == centrino_model[cpu]->op_points[i].frequency) - p->state = i; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI " - "config is deprecated.\n " - "Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.\n" ); - - return 0; - - err_kfree_all: - kfree(centrino_model[cpu]->op_points); - err_kfree: - kfree(centrino_model[cpu]); - err_unreg: - acpi_processor_unregister_performance(p, cpu); - dprintk(PFX "invalid ACPI data\n"); - return (result); -} -#else -static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; } -static inline int centrino_cpu_early_init_acpi(void) { return 0; } -#endif - static int centrino_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; @@ -568,27 +353,25 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - if (centrino_cpu_init_acpi(policy)) { - if (policy->cpu != 0) - return -ENODEV; + if (policy->cpu != 0) + return -ENODEV; - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; - if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; + if (i != N_IDS) + centrino_cpu[policy->cpu] = &cpu_ids[i]; - if (!centrino_cpu[policy->cpu]) { - dprintk("found unsupported CPU with " - "Enhanced SpeedStep: send /proc/cpuinfo to " - MAINTAINER "\n"); - return -ENODEV; - } + if (!centrino_cpu[policy->cpu]) { + dprintk("found unsupported CPU with " + "Enhanced SpeedStep: send /proc/cpuinfo to " + MAINTAINER "\n"); + return -ENODEV; + } - if (centrino_cpu_init_table(policy)) { - return -ENODEV; - } + if (centrino_cpu_init_table(policy)) { + return -ENODEV; } /* Check to see if Enhanced SpeedStep is enabled, and try to @@ -634,20 +417,6 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) cpufreq_frequency_table_put_attr(cpu); -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - if (!centrino_model[cpu]->model_name) { - static struct acpi_processor_performance *p; - - if (acpi_perf_data[cpu]) { - p = acpi_perf_data[cpu]; - dprintk("unregistering and freeing ACPI data\n"); - acpi_processor_unregister_performance(p, cpu); - kfree(centrino_model[cpu]->op_points); - kfree(centrino_model[cpu]); - } - } -#endif - centrino_model[cpu] = NULL; return 0; @@ -849,25 +618,12 @@ static int __init centrino_init(void) if (!cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - centrino_cpu_early_init_acpi(); - return cpufreq_register_driver(¢rino_driver); } static void __exit centrino_exit(void) { -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - unsigned int j; -#endif - cpufreq_unregister_driver(¢rino_driver); - -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - for_each_possible_cpu(j) { - kfree(acpi_perf_data[j]); - acpi_perf_data[j] = NULL; - } -#endif } MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c index 698f980eb443..a5b2346faf1f 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c @@ -205,7 +205,6 @@ static unsigned int speedstep_detect_chipset (void) * host brige. Abort on these systems. */ static struct pci_dev *hostbridge; - u8 rev = 0; hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_MC, @@ -216,8 +215,7 @@ static unsigned int speedstep_detect_chipset (void) if (!hostbridge) return 2; /* 2-M */ - pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev); - if (rev < 5) { + if (hostbridge->revision < 5) { dprintk("hostbridge does not support speedstep\n"); speedstep_chipset_dev = NULL; pci_dev_put(hostbridge); diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 89d91e6cc972..1e31b6caffb1 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -29,7 +29,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", + "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -40,8 +41,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Other (Linux-defined) */ "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", NULL, NULL, NULL, NULL, - "constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "constant_tsc", "up", NULL, "arch_perfmon", + "pebs", "bts", NULL, "sync_rdtsc", + "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ @@ -57,9 +59,16 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm", - "sse4a", "misalignsse", - "3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", + "altmovcr8", "abm", "sse4a", + "misalignsse", "3dnowprefetch", + "osvw", "ibs", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Auxiliary (Linux-defined) */ + "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; diff --git a/arch/i386/kernel/e820.c b/arch/i386/kernel/e820.c index 9645bb51f76a..fc822a46897a 100644 --- a/arch/i386/kernel/e820.c +++ b/arch/i386/kernel/e820.c @@ -734,7 +734,7 @@ void __init print_memory_map(char *who) case E820_NVS: printk("(ACPI NVS)\n"); break; - default: printk("type %lu\n", e820.map[i].type); + default: printk("type %u\n", e820.map[i].type); break; } } diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index f74dfc419b56..82714668d43b 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -168,6 +168,12 @@ page_pde_offset = (__PAGE_OFFSET >> 20); .section .init.text,"ax",@progbits #endif + /* Do an early initialization of the fixmap area */ + movl $(swapper_pg_dir - __PAGE_OFFSET), %edx + movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax + addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ + movl %eax, 4092(%edx) + #ifdef CONFIG_SMP ENTRY(startup_32_smp) cld @@ -507,6 +513,8 @@ ENTRY(_stext) .section ".bss.page_aligned","w" ENTRY(swapper_pg_dir) .fill 1024,4,0 +ENTRY(swapper_pg_pmd) + .fill 1024,4,0 ENTRY(empty_zero_page) .fill 4096,1,0 diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 06dfa65ad180..6c49acb96982 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -538,8 +538,31 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) return 1; } -static noinline void __switch_to_xtra(struct task_struct *next_p, - struct tss_struct *tss) +#ifdef CONFIG_SECCOMP +void hard_disable_TSC(void) +{ + write_cr4(read_cr4() | X86_CR4_TSD); +} +void disable_TSC(void) +{ + preempt_disable(); + if (!test_and_set_thread_flag(TIF_NOTSC)) + /* + * Must flip the CPU state synchronously with + * TIF_NOTSC in the current running context. + */ + hard_disable_TSC(); + preempt_enable(); +} +void hard_enable_TSC(void) +{ + write_cr4(read_cr4() & ~X86_CR4_TSD); +} +#endif /* CONFIG_SECCOMP */ + +static noinline void +__switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, + struct tss_struct *tss) { struct thread_struct *next; @@ -555,6 +578,17 @@ static noinline void __switch_to_xtra(struct task_struct *next_p, set_debugreg(next->debugreg[7], 7); } +#ifdef CONFIG_SECCOMP + if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^ + test_tsk_thread_flag(next_p, TIF_NOTSC)) { + /* prev and next are different */ + if (test_tsk_thread_flag(next_p, TIF_NOTSC)) + hard_disable_TSC(); + else + hard_enable_TSC(); + } +#endif + if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { /* * Disable the bitmap via an invalid offset. We still cache @@ -586,33 +620,6 @@ static noinline void __switch_to_xtra(struct task_struct *next_p, } /* - * This function selects if the context switch from prev to next - * has to tweak the TSC disable bit in the cr4. - */ -static inline void disable_tsc(struct task_struct *prev_p, - struct task_struct *next_p) -{ - struct thread_info *prev, *next; - - /* - * gcc should eliminate the ->thread_info dereference if - * has_secure_computing returns 0 at compile time (SECCOMP=n). - */ - prev = task_thread_info(prev_p); - next = task_thread_info(next_p); - - if (has_secure_computing(prev) || has_secure_computing(next)) { - /* slow path here */ - if (has_secure_computing(prev) && - !has_secure_computing(next)) { - write_cr4(read_cr4() & ~X86_CR4_TSD); - } else if (!has_secure_computing(prev) && - has_secure_computing(next)) - write_cr4(read_cr4() | X86_CR4_TSD); - } -} - -/* * switch_to(x,yn) should switch tasks from x to y. * * We fsave/fwait so that an exception goes off at the right time @@ -689,11 +696,9 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas /* * Now maybe handle debug registers and/or IO bitmaps */ - if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW) - || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))) - __switch_to_xtra(next_p, tss); - - disable_tsc(prev_p, next_p); + if (unlikely(task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV || + task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT)) + __switch_to_xtra(prev_p, next_p, tss); /* * Leave lazy mode, flushing any hypercalls made here. diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 698c24fe482e..2d61e65eeb50 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -102,19 +102,10 @@ static unsigned int highmem_pages = -1; /* * Setup options */ -struct drive_info_struct { char dummy[32]; } drive_info; -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || \ - defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE) -EXPORT_SYMBOL(drive_info); -#endif struct screen_info screen_info; EXPORT_SYMBOL(screen_info); struct apm_info apm_info; EXPORT_SYMBOL(apm_info); -struct sys_desc_table_struct { - unsigned short length; - unsigned char table[0]; -}; struct edid_info edid_info; EXPORT_SYMBOL_GPL(edid_info); struct ist_info ist_info; @@ -134,7 +125,7 @@ unsigned long saved_videomode; static char __initdata command_line[COMMAND_LINE_SIZE]; -unsigned char __initdata boot_params[PARAM_SIZE]; +struct boot_params __initdata boot_params; #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) struct edd edd; @@ -528,7 +519,6 @@ void __init setup_arch(char **cmdline_p) #endif ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); - drive_info = DRIVE_INFO; screen_info = SCREEN_INFO; edid_info = EDID_INFO; apm_info.bios = APM_BIOS_INFO; diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 90da0575fcff..28bd1c5163ec 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -390,7 +390,7 @@ void die(const char * str, struct pt_regs * regs, long err) unsigned long esp; unsigned short ss; - report_bug(regs->eip); + report_bug(regs->eip, regs); printk(KERN_EMERG "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); #ifdef CONFIG_PREEMPT diff --git a/arch/i386/kernel/verify_cpu.S b/arch/i386/kernel/verify_cpu.S deleted file mode 100644 index f1d1eacf4ab0..000000000000 --- a/arch/i386/kernel/verify_cpu.S +++ /dev/null @@ -1,94 +0,0 @@ -/* Check if CPU has some minimum CPUID bits - This runs in 16bit mode so that the caller can still use the BIOS - to output errors on the screen */ -#include <asm/cpufeature.h> -#include <asm/msr.h> - -verify_cpu: - pushfl # Save caller passed flags - pushl $0 # Kill any dangerous flags - popfl - -#if CONFIG_X86_MINIMUM_CPU_MODEL >= 4 - pushfl - pop %eax - orl $(1<<18),%eax # try setting AC - push %eax - popfl - pushfl - popl %eax - testl $(1<<18),%eax - jz bad -#endif -#if REQUIRED_MASK1 != 0 - pushfl # standard way to check for cpuid - popl %eax - movl %eax,%ebx - xorl $0x200000,%eax - pushl %eax - popfl - pushfl - popl %eax - cmpl %eax,%ebx - pushfl # standard way to check for cpuid - popl %eax - movl %eax,%ebx - xorl $0x200000,%eax - pushl %eax - popfl - pushfl - popl %eax - cmpl %eax,%ebx - jz bad # REQUIRED_MASK1 != 0 requires CPUID - - movl $0x0,%eax # See if cpuid 1 is implemented - cpuid - cmpl $0x1,%eax - jb bad # no cpuid 1 - -#if REQUIRED_MASK1 & NEED_CMPXCHG64 - /* Some VIA C3s need magic MSRs to enable CX64. Do this here */ - cmpl $0x746e6543,%ebx # Cent - jne 1f - cmpl $0x48727561,%edx # aurH - jne 1f - cmpl $0x736c7561,%ecx # auls - jne 1f - movl $1,%eax # check model - cpuid - movl %eax,%ebx - shr $8,%ebx - andl $0xf,%ebx - cmp $6,%ebx # check family == 6 - jne 1f - shr $4,%eax - andl $0xf,%eax - cmpl $6,%eax # check model >= 6 - jb 1f - # assume models >= 6 all support this MSR - movl $MSR_VIA_FCR,%ecx - rdmsr - orl $((1<<1)|(1<<7)),%eax # enable CMPXCHG64 and PGE - wrmsr -1: -#endif - movl $0x1,%eax # Does the cpu have what it takes - cpuid - -#if CONFIG_X86_MINIMUM_CPU_MODEL > 4 -#error add proper model checking here -#endif - - andl $REQUIRED_MASK1,%edx - xorl $REQUIRED_MASK1,%edx - jnz bad -#endif /* REQUIRED_MASK1 */ - - popfl - xor %eax,%eax - ret - -bad: - popfl - movl $1,%eax - ret diff --git a/arch/i386/mach-visws/traps.c b/arch/i386/mach-visws/traps.c index 5199bd03254a..843b67acf43b 100644 --- a/arch/i386/mach-visws/traps.c +++ b/arch/i386/mach-visws/traps.c @@ -23,13 +23,13 @@ static __init void lithium_init(void) set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS); if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || - (li_pcia_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) { + (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A'); panic("This machine is not SGI Visual Workstation 320/540"); } if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || - (li_pcib_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) { + (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B'); panic("This machine is not SGI Visual Workstation 320/540"); } diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index b95b42950ed4..e7306dbf6c42 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -118,12 +118,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci static void pci_fixup_via_northbridge_bug(struct pci_dev *d) { u8 v; - u8 revision; int where = 0x55; int mask = 0x1f; /* clear bits 5, 6, 7 by default */ - pci_read_config_byte(d, PCI_REVISION_ID, &revision); - if (d->device == PCI_DEVICE_ID_VIA_8367_0) { /* fix pci bus latency issues resulted by NB bios error it appears on bug free^Wreduced kt266x's bios forces @@ -133,8 +130,8 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d) where = 0x95; /* the memory write queue timer register is different for the KT266x's: 0x95 not 0x55 */ } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && - (revision == VIA_8363_KL133_REVISION_ID || - revision == VIA_8363_KM133_REVISION_ID)) { + (d->revision == VIA_8363_KL133_REVISION_ID || + d->revision == VIA_8363_KM133_REVISION_ID)) { mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 causes screen corruption on the KL133/KM133 */ } @@ -142,7 +139,7 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d) pci_read_config_byte(d, where, &v); if (v & ~mask) { printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ - d->device, revision, where, v, mask, v & mask); + d->device, d->revision, where, v, mask, v & mask); v &= mask; pci_write_config_byte(d, where, v); } diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index de1bff659969..db9ddff95841 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -520,8 +520,10 @@ config PCI here unless you are using a simulator without PCI support. config PCI_DOMAINS - bool - default PCI + def_bool PCI + +config PCI_SYSCALL + def_bool PCI source "drivers/pci/pcie/Kconfig" diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index c05bda662364..6f4d3d06f0ed 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -261,7 +261,7 @@ elf32_set_personality (void) } static unsigned long -elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type) +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) { unsigned long pgoff = (eppnt->p_vaddr) & ~IA32_PAGE_MASK; diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 99b665e2b1d5..06efd1f9b800 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -304,7 +304,7 @@ ia32_syscall_table: data8 sys_ni_syscall /* init_module */ data8 sys_ni_syscall /* delete_module */ data8 sys_ni_syscall /* get_kernel_syms */ /* 130 */ - data8 sys_quotactl + data8 sys32_quotactl data8 sys_getpgid data8 sys_fchdir data8 sys_ni_syscall /* sys_bdflush */ diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S index 3274850cf272..74b1ccce4e84 100644 --- a/arch/ia64/kernel/gate.S +++ b/arch/ia64/kernel/gate.S @@ -30,6 +30,7 @@ .previous #define BRL_COND_FSYS_BUBBLE_DOWN(pr) \ [1:](pr)brl.cond.sptk 0; \ + ;; \ .xdata4 ".data.patch.brl_fsys_bubble_down", 1b-. GLOBAL_ENTRY(__kernel_syscall_via_break) diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 1ead5ea6c5ce..4b5daa3cc0fe 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -57,6 +57,9 @@ * * 2006-09-15 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> * Add printing support for MCA/INIT. + * + * 2007-04-27 Russ Anderson <rja@sgi.com> + * Support multiple cpus going through OS_MCA in the same event. */ #include <linux/types.h> #include <linux/init.h> @@ -96,7 +99,6 @@ #endif /* Used by mca_asm.S */ -u32 ia64_mca_serialize; DEFINE_PER_CPU(u64, ia64_mca_data); /* == __per_cpu_mca[smp_processor_id()] */ DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */ DEFINE_PER_CPU(u64, ia64_mca_pal_pte); /* PTE to map PAL code */ @@ -963,11 +965,12 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, goto no_mod; } + if (r13 != sos->prev_IA64_KR_CURRENT) { + msg = "inconsistent previous current and r13"; + goto no_mod; + } + if (!mca_recover_range(ms->pmsa_iip)) { - if (r13 != sos->prev_IA64_KR_CURRENT) { - msg = "inconsistent previous current and r13"; - goto no_mod; - } if ((r12 - r13) >= KERNEL_STACK_SIZE) { msg = "inconsistent r12 and r13"; goto no_mod; @@ -1187,6 +1190,13 @@ all_in: * further MCA logging is enabled by clearing logs. * Monarch also has the duty of sending wakeup-IPIs to pull the * slave processors out of rendezvous spinloop. + * + * If multiple processors call into OS_MCA, the first will become + * the monarch. Subsequent cpus will be recorded in the mca_cpu + * bitmask. After the first monarch has processed its MCA, it + * will wake up the next cpu in the mca_cpu bitmask and then go + * into the rendezvous loop. When all processors have serviced + * their MCA, the last monarch frees up the rest of the processors. */ void ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, @@ -1196,16 +1206,32 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, struct task_struct *previous_current; struct ia64_mca_notify_die nd = { .sos = sos, .monarch_cpu = &monarch_cpu }; + static atomic_t mca_count; + static cpumask_t mca_cpu; + if (atomic_add_return(1, &mca_count) == 1) { + monarch_cpu = cpu; + sos->monarch = 1; + } else { + cpu_set(cpu, mca_cpu); + sos->monarch = 0; + } mprintk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d " "monarch=%ld\n", sos->proc_state_param, cpu, sos->monarch); previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); - monarch_cpu = cpu; + if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0) == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); - ia64_wait_for_slaves(cpu, "MCA"); + if (sos->monarch) { + ia64_wait_for_slaves(cpu, "MCA"); + } else { + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA; + while (cpu_isset(cpu, mca_cpu)) + cpu_relax(); /* spin until monarch wakes us */ + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; + } /* Wakeup all the processors which are spinning in the rendezvous loop. * They will leave SAL, then spin in the OS with interrupts disabled @@ -1244,6 +1270,26 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); + + if (atomic_dec_return(&mca_count) > 0) { + int i; + + /* wake up the next monarch cpu, + * and put this cpu in the rendez loop. + */ + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA; + for_each_online_cpu(i) { + if (cpu_isset(i, mca_cpu)) { + monarch_cpu = i; + cpu_clear(i, mca_cpu); /* wake next cpu */ + while (monarch_cpu != -1) + cpu_relax(); /* spin until last cpu leaves */ + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; + set_curr_task(cpu, previous_current); + return; + } + } + } set_curr_task(cpu, previous_current); monarch_cpu = -1; } diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S index 8c9c26aa6ae0..0f5965fcdf85 100644 --- a/arch/ia64/kernel/mca_asm.S +++ b/arch/ia64/kernel/mca_asm.S @@ -133,14 +133,6 @@ ia64_do_tlb_purge: //StartMain//////////////////////////////////////////////////////////////////// ia64_os_mca_dispatch: - // Serialize all MCA processing - mov r3=1;; - LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);; -ia64_os_mca_spin: - xchg4 r4=[r2],r3;; - cmp.ne p6,p0=r4,r0 -(p6) br ia64_os_mca_spin - mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack LOAD_PHYSICAL(p0,r2,1f) // return address mov r19=1 // All MCA events are treated as monarch (for now) @@ -291,10 +283,6 @@ END(ia64_os_mca_virtual_begin) mov b0=r12 // SAL_CHECK return address - // release lock - LOAD_PHYSICAL(p0,r3,ia64_mca_serialize);; - st4.rel [r3]=r0 - br b0 //EndMain////////////////////////////////////////////////////////////////////// diff --git a/arch/ia64/kernel/mca_drv_asm.S b/arch/ia64/kernel/mca_drv_asm.S index f2d4900751ba..3bccb06c8d21 100644 --- a/arch/ia64/kernel/mca_drv_asm.S +++ b/arch/ia64/kernel/mca_drv_asm.S @@ -40,7 +40,11 @@ GLOBAL_ENTRY(mca_handler_bhhook) mov b6=loc1 ;; mov loc1=rp - ssm psr.i | psr.ic + ssm psr.ic + ;; + srlz.i + ;; + ssm psr.i br.call.sptk.many rp=b6 // does not return ... ;; mov ar.pfs=loc0 diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index af73b8dfde28..fa40cba43350 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -513,7 +513,8 @@ copy_thread (int nr, unsigned long clone_flags, static void do_copy_task_regs (struct task_struct *task, struct unw_frame_info *info, void *arg) { - unsigned long mask, sp, nat_bits = 0, ip, ar_rnat, urbs_end, cfm; + unsigned long mask, sp, nat_bits = 0, ar_rnat, urbs_end, cfm; + unsigned long uninitialized_var(ip); /* GCC be quiet */ elf_greg_t *dst = arg; struct pt_regs *pt; char nat; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 188fb73c6845..4d9864cc92c9 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -390,10 +390,6 @@ early_console_setup (char *cmdline) if (!efi_setup_pcdp_console(cmdline)) earlycons++; #endif -#ifdef CONFIG_SERIAL_8250_CONSOLE - if (!early_serial_console_init(cmdline)) - earlycons++; -#endif return (earlycons) ? 0 : -1; } diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index fa4e6d4810f3..1682fc639038 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -175,7 +175,7 @@ EXPORT_SYMBOL(flush_tlb_range); void __devinit ia64_tlb_init (void) { - ia64_ptce_info_t ptce_info; + ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */ unsigned long tr_pgbits; long status; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 73696b4a2eed..07d0e92742c8 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -591,6 +591,9 @@ int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { + unsigned long size = vma->vm_end - vma->vm_start; + pgprot_t prot; + /* * I/O space cannot be accessed via normal processor loads and * stores on this platform. @@ -604,15 +607,24 @@ pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma, */ return -EINVAL; + if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size)) + return -EINVAL; + + prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size, + vma->vm_page_prot); + /* - * Leave vm_pgoff as-is, the PCI space address is the physical - * address on this platform. + * If the user requested WC, the kernel uses UC or WC for this region, + * and the chipset supports WC, we can use WC. Otherwise, we have to + * use the same attribute the kernel uses. */ - if (write_combine && efi_range_is_wc(vma->vm_start, - vma->vm_end - vma->vm_start)) + if (write_combine && + ((pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_UC || + (pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_WC) && + efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start)) vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); else - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + vma->vm_page_prot = prot; if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, vma->vm_page_prot)) diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c index c6216f454ffb..3c7178f5dce8 100644 --- a/arch/ia64/sn/kernel/io_acpi_init.c +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -418,7 +418,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev) void __iomem *addr; struct pcidev_info *pcidev_info = NULL; struct sn_irq_info *sn_irq_info = NULL; - size_t size; + size_t image_size, size; if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) { panic("%s: Failure obtaining pcidev_info for %s\n", @@ -428,17 +428,16 @@ sn_acpi_slot_fixup(struct pci_dev *dev) if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) { /* * A valid ROM image exists and has been shadowed by the - * PROM. Setup the pci_dev ROM resource to point to - * the shadowed copy. + * PROM. Setup the pci_dev ROM resource with the address + * of the shadowed copy, and the actual length of the ROM image. */ - size = dev->resource[PCI_ROM_RESOURCE].end - - dev->resource[PCI_ROM_RESOURCE].start; - addr = - ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE], - size); + size = pci_resource_len(dev, PCI_ROM_RESOURCE); + addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE], + size); + image_size = pci_get_rom_size(addr, size); dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr; dev->resource[PCI_ROM_RESOURCE].end = - (unsigned long) addr + size; + (unsigned long) addr + image_size - 1; dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY; } sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info); diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 6b10e5d28488..906b93674b76 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -259,9 +259,23 @@ sn_io_slot_fixup(struct pci_dev *dev) insert_resource(&ioport_resource, &dev->resource[idx]); else insert_resource(&iomem_resource, &dev->resource[idx]); - /* If ROM, mark as shadowed in PROM */ - if (idx == PCI_ROM_RESOURCE) - dev->resource[idx].flags |= IORESOURCE_ROM_BIOS_COPY; + /* + * If ROM, set the actual ROM image size, and mark as + * shadowed in PROM. + */ + if (idx == PCI_ROM_RESOURCE) { + size_t image_size; + void __iomem *rom; + + rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE), + size + 1); + image_size = pci_get_rom_size(rom, size + 1); + dev->resource[PCI_ROM_RESOURCE].end = + dev->resource[PCI_ROM_RESOURCE].start + + image_size - 1; + dev->resource[PCI_ROM_RESOURCE].flags |= + IORESOURCE_ROM_BIOS_COPY; + } } /* Create a pci_window in the pci_controller struct for * each device resource. diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 493380b2c05f..5a289e4de838 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -369,7 +369,7 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) static int is_fpga_tio(int nasid, int *bt) { - u16 ioboard_type; + u16 uninitialized_var(ioboard_type); /* GCC be quiet */ s64 rc; rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard_type); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index b42bfcae6f91..42485ad50ceb 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -80,7 +80,7 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft) u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus) { s64 rc; - u16 ioboard; + u16 uninitialized_var(ioboard); /* GCC be quiet */ nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard); diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index c3bb8a755b00..8ccf3e47bff8 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -31,6 +31,9 @@ config GENERIC_IRQ_PROBE config NO_IOPORT def_bool y +config NO_DMA + def_bool y + source "init/Kconfig" diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 941955dc3b7c..846f97534685 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -377,7 +377,7 @@ unsigned long get_wchan(struct task_struct *p) fp = ((struct switch_stack *)p->thread.ksp)->a6; do { if (fp < stack_page+sizeof(struct thread_info) || - fp >= 8184+stack_page) + fp >= THREAD_SIZE-8+stack_page) return 0; pc = ((unsigned long *)fp)[1]; if (!in_sched_functions(pc)) diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index 8133b1047353..80f4e9d74ac1 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -1,8 +1,8 @@ /* * linux/arch/m68knommu/kernel/setup.c * - * Copyright (C) 1999-2004 Greg Ungerer (gerg@snapgear.com) - * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca> + * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uClinux.org> * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> * Copyright (C) 1995 Hamish Macdonald @@ -20,17 +20,13 @@ #include <linux/sched.h> #include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/fs.h> #include <linux/fb.h> #include <linux/module.h> #include <linux/console.h> -#include <linux/genhd.h> #include <linux/errno.h> #include <linux/string.h> -#include <linux/major.h> #include <linux/bootmem.h> #include <linux/seq_file.h> -#include <linux/root_dev.h> #include <linux/init.h> #include <asm/setup.h> @@ -46,34 +42,19 @@ EXPORT_SYMBOL(memory_end); char __initdata command_line[COMMAND_LINE_SIZE]; -/* setup some dummy routines */ -static void dummy_waitbut(void) -{ -} +void (*mach_trap_init)(void); -void (*mach_sched_init) (irq_handler_t handler); -void (*mach_tick)( void ); -/* machine dependent keyboard functions */ -int (*mach_keyb_init) (void); -int (*mach_kbdrate) (struct kbd_repeat *); -void (*mach_kbd_leds) (unsigned int); -/* machine dependent irq functions */ -void (*mach_init_IRQ) (void); -irq_handler_t mach_default_handler; -int (*mach_get_irq_list) (struct seq_file *, void *); -void (*mach_process_int) (int irq, struct pt_regs *fp); -void (*mach_trap_init) (void); /* machine dependent timer functions */ -unsigned long (*mach_gettimeoffset) (void); -void (*mach_gettod) (int*, int*, int*, int*, int*, int*); -int (*mach_hwclk) (int, struct rtc_time*); -int (*mach_set_clock_mmss) (unsigned long); -void (*mach_mksound)( unsigned int count, unsigned int ticks ); -void (*mach_reset)( void ); -void (*waitbut)(void) = dummy_waitbut; -void (*mach_debug_init)(void); -void (*mach_halt)( void ); -void (*mach_power_off)( void ); +void (*mach_sched_init)(irq_handler_t handler); +void (*mach_tick)(void); +void (*mach_gettod)(int*, int*, int*, int*, int*, int*); +int (*mach_set_clock_mmss)(unsigned long); +unsigned long (*mach_gettimeoffset)(void); + +/* machine dependent reboot functions */ +void (*mach_reset)(void); +void (*mach_halt)(void); +void (*mach_power_off)(void); #ifdef CONFIG_M68000 @@ -134,13 +115,6 @@ void (*mach_power_off)( void ); #define CPU "UNKNOWN" #endif -/* (es) */ -/* note: why is this defined here? the must be a better place to put this */ -#if defined( CONFIG_TELOS) || defined( CONFIG_UCDIMM ) || defined( CONFIG_UCSIMM ) || defined(CONFIG_DRAGEN2) || (defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )) -#define CAT_ROMARRAY -#endif -/* (/es) */ - extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; @@ -148,15 +122,8 @@ void setup_arch(char **cmdline_p) { int bootmap_size; -#if defined(CAT_ROMARRAY) && defined(DEBUG) - extern int __data_rom_start; - extern int __data_start; - int *romarray = (int *)((int) &__data_rom_start + - (int)&_edata - (int)&__data_start); -#endif - memory_start = PAGE_ALIGN(_ramstart); - memory_end = _ramend; /* by now the stack is part of the init task */ + memory_end = _ramend; init_mm.start_code = (unsigned long) &_stext; init_mm.end_code = (unsigned long) &_etext; @@ -220,11 +187,7 @@ void setup_arch(char **cmdline_p) (int) &_sbss, (int) &_ebss); printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " "STACK=0x%06x-0x%06x\n", -#ifdef CAT_ROMARRAY - (int) romarray, ((int) romarray) + romarray[2], -#else (int) &_ebss, (int) memory_start, -#endif (int) memory_start, (int) memory_end, (int) memory_end, (int) _ramend); #endif diff --git a/arch/m68knommu/mm/memory.c b/arch/m68knommu/mm/memory.c index 411e45248e5c..1a66b71035a4 100644 --- a/arch/m68knommu/mm/memory.c +++ b/arch/m68knommu/mm/memory.c @@ -17,90 +17,14 @@ #include <linux/types.h> #include <linux/slab.h> -#include <asm/setup.h> #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> /* - * cache_clear() semantics: Clear any cache entries for the area in question, - * without writing back dirty entries first. This is useful if the data will - * be overwritten anyway, e.g. by DMA to memory. The range is defined by a - * _physical_ address. - */ - -void cache_clear (unsigned long paddr, int len) -{ -} - - -/* - * Define cache invalidate functions. The ColdFire 5407 is really - * the only processor that needs to do some work here. Anything - * that has separate data and instruction caches will be a problem. - */ -#ifdef CONFIG_M5407 - -static __inline__ void cache_invalidate_lines(unsigned long paddr, int len) -{ - unsigned long sset, eset; - - sset = (paddr & 0x00000ff0); - eset = ((paddr + len) & 0x0000ff0) + 0x10; - - __asm__ __volatile__ ( - "nop\n\t" - "clrl %%d0\n\t" - "1:\n\t" - "movel %0,%%a0\n\t" - "addl %%d0,%%a0\n\t" - "2:\n\t" - ".word 0xf4e8\n\t" - "addl #0x10,%%a0\n\t" - "cmpl %1,%%a0\n\t" - "blt 2b\n\t" - "addql #1,%%d0\n\t" - "cmpil #4,%%d0\n\t" - "bne 1b" - : : "a" (sset), "a" (eset) : "d0", "a0" ); -} - -#else -#define cache_invalidate_lines(a,b) -#endif - - -/* - * cache_push() semantics: Write back any dirty cache data in the given area, - * and invalidate the range in the instruction cache. It needs not (but may) - * invalidate those entries also in the data cache. The range is defined by a - * _physical_ address. - */ - -void cache_push (unsigned long paddr, int len) -{ - cache_invalidate_lines(paddr, len); -} - - -/* - * cache_push_v() semantics: Write back any dirty cache data in the given - * area, and invalidate those entries at least in the instruction cache. This - * is intended to be used after data has been written that can be executed as - * code later. The range is defined by a _user_mode_ _virtual_ address (or, - * more exactly, the space is defined by the %sfc/%dfc register.) - */ - -void cache_push_v (unsigned long vaddr, int len) -{ - cache_invalidate_lines(vaddr, len); -} - -/* Map some physical address range into the kernel address space. The - * code is copied and adapted from map_chunk(). + * Map some physical address range into the kernel address space. + * The code is copied and adapted from map_chunk(). */ unsigned long kernel_map(unsigned long paddr, unsigned long size, diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a00fabe2e4e0..5c863bcd5614 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -117,9 +117,9 @@ config MACH_JAZZ select ARC32 select ARCH_MAY_HAVE_PC_FDC select GENERIC_ISA_DMA - select I8253 select I8259 select ISA + select PCSPEAKER select SYS_HAS_CPU_R4X00 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL @@ -347,9 +347,9 @@ config QEMU select DMA_COHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT - select I8253 select I8259 select ISA + select PCSPEAKER select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL @@ -562,9 +562,9 @@ config SNI_RM select HW_HAS_EISA select HW_HAS_PCI select IRQ_CPU - select I8253 select I8259 select ISA + select PCSPEAKER select SWAP_IO_SPACE if CPU_BIG_ENDIAN select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 @@ -1404,6 +1404,19 @@ config MIPS_MT_SMTC_INSTANT_REPLAY it off), but ensures that IPIs are handled promptly even under heavy I/O interrupt load. +config MIPS_MT_SMTC_IM_BACKSTOP + bool "Use per-TC register bits as backstop for inhibited IM bits" + depends on MIPS_MT_SMTC + default y + help + To support multiple TC microthreads acting as "CPUs" within + a VPE, VPE-wide interrupt mask bits must be specially manipulated + during interrupt handling. To support legacy drivers and interrupt + controller management code, SMTC has a "backstop" to track and + if necessary restore the interrupt mask. This has some performance + impact on interrupt service overhead. Disable it only if you know + what you are doing. + config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" depends on MIPS_VPE_LOADER @@ -1851,7 +1864,7 @@ config MMU bool default y -config I8253 +config PCSPEAKER bool source "drivers/pcmcia/Kconfig" diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 13fe187f35d6..a95b37773196 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -100,18 +100,9 @@ void __init plat_mem_setup(void) argptr = prom_getcmdline(); /* default panel */ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ -#ifdef CONFIG_MIPS_HYDROGEN3 - strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor"); -#endif } #endif -#ifdef CONFIG_FB_XPERT98 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " video=atyfb:1024x768-8@70"); - } -#endif #if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) /* au1000 does not support vra, au1500 and au1100 do */ diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index fa1c62f05515..8fc29982d700 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -203,11 +203,7 @@ wakeup_counter0_set(int ticks) /* I haven't found anyone that doesn't use a 12 MHz source clock, * but just in case..... */ -#ifdef CONFIG_AU1000_SRC_CLK -#define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK -#else #define AU1000_SRC_CLK 12000000 -#endif /* * We read the real processor speed from the PLL. This is important @@ -247,33 +243,8 @@ unsigned long cal_r4koff(void) au_writel (0, SYS_TOYWRITE); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); -#if defined(CONFIG_AU1000_USE32K) - { - unsigned long start, end, count; - - start = au_readl(SYS_RTCREAD); - start += 2; - /* wait for the beginning of a new tick - */ - while (au_readl(SYS_RTCREAD) < start); - - /* Start r4k counter. - */ - write_c0_count(0); - - /* Wait 0.5 seconds. - */ - end = start + (32768 / trim_divide)/2; - - while (end > au_readl(SYS_RTCREAD)); - - count = read_c0_count(); - cpu_speed = count * 2; - } -#else cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; -#endif } else { /* The 32KHz oscillator isn't running, so assume there diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c index 043302b7fe58..eea2092bde8d 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -131,14 +131,7 @@ void __init board_setup(void) /* The Pb1200 development board uses external MUX for PSC0 to support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI */ -#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550) - #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ - Refer to Pb1200/Db1200 documentation. -#elif defined( CONFIG_AU1XXX_PSC_SPI ) - bcsr->resets |= BCSR_RESETS_PCS0MUX; - /*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/ - bcsr->resets =0x900f; -#elif defined( CONFIG_I2C_AU1550 ) +#ifdef CONFIG_I2C_AU1550 bcsr->resets &= (~BCSR_RESETS_PCS0MUX); #endif au_sync(); diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index dd04eece9fd3..8a0b4ac5283d 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -241,7 +241,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ISA=y CONFIG_MMU=y -CONFIG_I8253=y +CONFIG_PCSPEAKER=y # # PCCARD (PCMCIA/CardBus) support diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 6cca105832ca..703de002e372 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -221,7 +221,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ISA=y CONFIG_MMU=y -CONFIG_I8253=y +CONFIG_PCSPEAKER=y # # PCCARD (PCMCIA/CardBus) support diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 1a67a85aabbb..a5dc5cb97aae 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -251,7 +251,7 @@ CONFIG_PCI=y CONFIG_ISA=y # CONFIG_EISA is not set CONFIG_MMU=y -CONFIG_I8253=y +CONFIG_PCSPEAKER=y # # PCCARD (PCMCIA/CardBus) support diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index f1cdb12f7925..f342d8c887b8 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -592,8 +592,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 961594cb5214..5c8085b6d7ab 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -63,7 +63,7 @@ obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_64BIT) += cpu-bugs64.o -obj-$(CONFIG_I8253) += i8253.o +obj-$(CONFIG_PCSPEAKER) += pcspeaker.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 76fd3f22c766..6b5df8bfab85 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -22,7 +22,8 @@ */ int __compute_return_epc(struct pt_regs *regs) { - unsigned int *addr, bit, fcr31, dspcontrol; + unsigned int __user *addr; + unsigned int bit, fcr31, dspcontrol; long epc; union mips_instruction insn; @@ -33,7 +34,7 @@ int __compute_return_epc(struct pt_regs *regs) /* * Read the instruction */ - addr = (unsigned int *) epc; + addr = (unsigned int __user *) epc; if (__get_user(insn.word, addr)) { force_sig(SIGSEGV, current); return -EFAULT; diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 686249c5c328..e29598ae939d 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -84,6 +84,7 @@ FEXPORT(restore_all) # restore full frame LONG_S sp, TI_REGS($28) jal deferred_smtc_ipi LONG_S s0, TI_REGS($28) +#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS ori v1, v0, TCSTATUS_IXMT @@ -110,6 +111,7 @@ FEXPORT(restore_all) # restore full frame _ehb xor t0, t0, t3 mtc0 t0, CP0_TCCONTEXT +#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ #endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 297bd56c2347..c0f19d638b98 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -243,9 +243,11 @@ NESTED(except_vec_vi_handler, 0, sp) */ mfc0 t1, CP0_STATUS and t0, a0, t1 +#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP mfc0 t2, CP0_TCCONTEXT or t0, t0, t2 mtc0 t0, CP0_TCCONTEXT +#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ xor t1, t1, t0 mtc0 t1, CP0_STATUS _ehb diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/pcspeaker.c index 475df6904219..475df6904219 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/pcspeaker.c diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 06729596812f..d9bfae53c43f 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -85,12 +85,7 @@ move $28, a2 cpu_restore_nonscratch a1 -#if (_THREAD_SIZE - 32) < 0x10000 - PTR_ADDIU t0, $28, _THREAD_SIZE - 32 -#else - PTR_LI t0, _THREAD_SIZE - 32 - PTR_ADDU t0, $28 -#endif + PTR_ADDU t0, $28, _THREAD_SIZE - 32 set_saved_sp t0, t1, t2 #ifdef CONFIG_MIPS_MT_SMTC /* Read-modify-writes of Status must be atomic on a VPE */ diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 80ea4fa95bd9..37c562c4c817 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -131,7 +131,7 @@ static void show_stacktrace(struct task_struct *task, struct pt_regs *regs) const int field = 2 * sizeof(unsigned long); long stackdata; int i; - unsigned long *sp = (unsigned long *)regs->regs[29]; + unsigned long __user *sp = (unsigned long __user *)regs->regs[29]; printk("Stack :"); i = 0; @@ -187,7 +187,7 @@ void dump_stack(void) EXPORT_SYMBOL(dump_stack); -void show_code(unsigned int *pc) +static void show_code(unsigned int __user *pc) { long i; @@ -305,7 +305,7 @@ void show_registers(struct pt_regs *regs) printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n", current->comm, current->pid, current_thread_info(), current); show_stacktrace(current, regs); - show_code((unsigned int *) regs->cp0_epc); + show_code((unsigned int __user *) regs->cp0_epc); printk("\n"); } @@ -373,7 +373,7 @@ asmlinkage void do_be(struct pt_regs *regs) action = MIPS_BE_FIXUP; if (board_be_handler) - action = board_be_handler(regs, fixup != 0); + action = board_be_handler(regs, fixup != NULL); switch (action) { case MIPS_BE_DISCARD: @@ -865,7 +865,7 @@ asmlinkage void do_mcheck(struct pt_regs *regs) dump_tlb_all(); } - show_code((unsigned int *) regs->cp0_epc); + show_code((unsigned int __user *) regs->cp0_epc); /* * Some chips may have other causes of machine check (e.g. SB1 diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 1a4db7dc77cb..465ff0ec85b9 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -10,6 +10,7 @@ #include <asm/mipsregs.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/tlbdebug.h> static inline const char *msk2str(unsigned int mask) { diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 52f87795ecc3..9cee907975ae 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -11,6 +11,7 @@ #include <asm/mipsregs.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/tlbdebug.h> extern int r3k_have_wired_reg; /* defined in tlb-r3k.c */ diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c index 2388f7f3ffde..58d14f4d9349 100644 --- a/arch/mips/lib/uncached.c +++ b/arch/mips/lib/uncached.c @@ -12,6 +12,7 @@ #include <asm/addrspace.h> #include <asm/bug.h> +#include <asm/cacheflush.h> #ifndef CKSEG2 #define CKSEG2 CKSSEG diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index d7f05b0abe17..17419e11ecad 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -205,7 +205,7 @@ static int isBranchInstr(mips_instruction * i) static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) { mips_instruction ir; - void * emulpc, *contpc; + unsigned long emulpc, contpc; unsigned int cond; if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { @@ -230,7 +230,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) * Linux MIPS branch emulator operates on context, updating the * cp0_epc. */ - emulpc = (void *) (xcp->cp0_epc + 4); /* Snapshot emulation target */ + emulpc = xcp->cp0_epc + 4; /* Snapshot emulation target */ if (__compute_return_epc(xcp)) { #ifdef CP1DBG @@ -244,12 +244,12 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) return SIGBUS; } /* __compute_return_epc() will have updated cp0_epc */ - contpc = (void *) xcp->cp0_epc; + contpc = xcp->cp0_epc; /* In order not to confuse ptrace() et al, tweak context */ - xcp->cp0_epc = (unsigned long) emulpc - 4; + xcp->cp0_epc = emulpc - 4; } else { - emulpc = (void *) xcp->cp0_epc; - contpc = (void *) (xcp->cp0_epc + 4); + emulpc = xcp->cp0_epc; + contpc = xcp->cp0_epc + 4; } emul: @@ -427,8 +427,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) * instruction */ xcp->cp0_epc += 4; - contpc = (void *) - (xcp->cp0_epc + + contpc = (xcp->cp0_epc + (MIPSInst_SIMM(ir) << 2)); if (get_user(ir, @@ -462,7 +461,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) * Single step the non-cp1 * instruction in the dslot */ - return mips_dsemul(xcp, ir, (unsigned long) contpc); + return mips_dsemul(xcp, ir, contpc); } else { /* branch not taken */ @@ -521,7 +520,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) } /* we did it !! */ - xcp->cp0_epc = (unsigned long) contpc; + xcp->cp0_epc = contpc; xcp->cp0_cause &= ~CAUSEF_BD; return 0; diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index ea6ba7248489..653e325849e4 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -54,8 +54,7 @@ struct emuframe { int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) { extern asmlinkage void handle_dsemulret(void); - mips_instruction *dsemul_insns; - struct emuframe *fr; + struct emuframe __user *fr; int err; if (ir == 0) { /* a nop is easy */ @@ -87,8 +86,8 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) */ /* Ensure that the two instructions are in the same cache line */ - dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7); - fr = (struct emuframe *) dsemul_insns; + fr = (struct emuframe __user *) + ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7); /* Verify that the stack pointer is not competely insane */ if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe)))) @@ -113,12 +112,13 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) int do_dsemulret(struct pt_regs *xcp) { - struct emuframe *fr; + struct emuframe __user *fr; unsigned long epc; u32 insn, cookie; int err = 0; - fr = (struct emuframe *) (xcp->cp0_epc - sizeof(mips_instruction)); + fr = (struct emuframe __user *) + (xcp->cp0_epc - sizeof(mips_instruction)); /* * If we can't even access the area, something is very wrong, but we'll diff --git a/arch/mips/mipssim/sim_int.c b/arch/mips/mipssim/sim_int.c index d86b37235cf6..5cbc3509ab52 100644 --- a/arch/mips/mipssim/sim_int.c +++ b/arch/mips/mipssim/sim_int.c @@ -77,7 +77,7 @@ asmlinkage void plat_irq_dispatch(void) irq = irq_ffs(pending); if (irq > 0) - do_IRQ(MIPSCPU_INT_BASE + irq); + do_IRQ(MIPS_CPU_IRQ_BASE + irq); else spurious_interrupt(); } diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index 3643582bdade..60e66906be65 100644 --- a/arch/mips/mipssim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -84,7 +84,7 @@ static void __init serial_init(void) /* hardware int 4 - the serial int, is CPU int 6 but poll for now */ s.irq = 0; - s.uartclk = BASE_BAUD * 16; + s.uartclk = 1843200; s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; s.iotype = UPIO_PORT; s.regshift = 0; diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c index 874a18e8ac24..a0f5a5dca1b2 100644 --- a/arch/mips/mipssim/sim_time.c +++ b/arch/mips/mipssim/sim_time.c @@ -5,7 +5,6 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/mc146818rtc.h> -#include <linux/mipsregs.h> #include <linux/smp.h> #include <linux/timex.h> diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index f26ede001a0b..c58bd3d036f4 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -2,7 +2,7 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o pci-dac.o +obj-y += pci.o # # PCI bus host bridge specific code diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 7fc475f7eae5..76b4f0ffb1e5 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -58,8 +58,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, static void qube_raq_galileo_fixup(struct pci_dev *dev) { - unsigned short galileo_id; - if (dev->devfn != PCI_DEVFN(0, 0)) return; @@ -84,16 +82,14 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) * Therefore we must set the disconnect/retry cycle values to * something sensible when using the new Galileo. */ - pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id); - galileo_id &= 0xff; /* mask off class info */ - printk(KERN_INFO "Galileo: revision %u\n", galileo_id); + printk(KERN_INFO "Galileo: revision %u\n", dev->revision); #if 0 - if (galileo_id >= 0x10) { + if (dev->revision >= 0x10) { /* New Galileo, assumes PCI stop line to VIA is connected. */ GT_WRITE(GT_PCI0_TOR_OFS, 0x4020); - } else if (galileo_id == 0x1 || galileo_id == 0x2) + } else if (dev->revision == 0x1 || dev->revision == 0x2) #endif { signed int timeo; diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c deleted file mode 100644 index 0f0ea1b7d4dd..000000000000 --- a/arch/mips/pci/pci-dac.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org> - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ - -#include <linux/types.h> -#include <linux/dma-mapping.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <asm/cache.h> -#include <asm/io.h> - -#include <dma-coherence.h> - -#include <linux/pci.h> - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - struct device *dev = &pdev->dev; - - BUG_ON(direction == DMA_NONE); - - if (!plat_device_is_coherent(dev)) { - unsigned long addr; - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, PAGE_SIZE); - } - - return plat_map_dma_mem_page(dev, page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - if (!plat_device_is_coherent(&pdev->dev)) - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - if (!plat_device_is_coherent(&pdev->dev)) - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 8108231f2e20..99d8f4fd3ff4 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -269,7 +269,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - struct pci_dev *dev = pci_dev_b(ln); + dev = pci_dev_b(ln); if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) pcibios_fixup_device_resources(dev, bus); diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c deleted file mode 100644 index 97c73c793c35..000000000000 --- a/arch/mips/sibyte/swarm/time.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Time routines for the swarm board. We pass all the hard stuff - * through to the sb1250 handling code. Only thing we really keep - * track of here is what time of day we think it is. And we don't - * really even do a good job of that... - */ - - -#include <linux/bcd.h> -#include <linux/init.h> -#include <linux/time.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <asm/system.h> -#include <asm/addrspace.h> -#include <asm/io.h> - -#include <asm/sibyte/sb1250.h> -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/sb1250_smbus.h> - -static unsigned long long sec_bias = 0; -static unsigned int usec_bias = 0; - -/* Xicor 1241 definitions */ - -/* - * Register bits - */ - -#define X1241REG_SR_BAT 0x80 /* currently on battery power */ -#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */ -#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */ -#define X1241REG_SR_RTCF 0x01 /* clock failed */ -#define X1241REG_BL_BP2 0x80 /* block protect 2 */ -#define X1241REG_BL_BP1 0x40 /* block protect 1 */ -#define X1241REG_BL_BP0 0x20 /* block protect 0 */ -#define X1241REG_BL_WD1 0x10 -#define X1241REG_BL_WD0 0x08 -#define X1241REG_HR_MIL 0x80 /* military time format */ - -/* - * Register numbers - */ - -#define X1241REG_BL 0x10 /* block protect bits */ -#define X1241REG_INT 0x11 /* */ -#define X1241REG_SC 0x30 /* Seconds */ -#define X1241REG_MN 0x31 /* Minutes */ -#define X1241REG_HR 0x32 /* Hours */ -#define X1241REG_DT 0x33 /* Day of month */ -#define X1241REG_MO 0x34 /* Month */ -#define X1241REG_YR 0x35 /* Year */ -#define X1241REG_DW 0x36 /* Day of Week */ -#define X1241REG_Y2K 0x37 /* Year 2K */ -#define X1241REG_SR 0x3F /* Status register */ - -#define X1241_CCR_ADDRESS 0x6F - -#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg))) - -static int xicor_read(uint8_t addr) -{ - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); - __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); - __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, - SMB_CSR(R_SMB_START)); - - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, - SMB_CSR(R_SMB_START)); - - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); - return -1; - } - - return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); -} - -static int xicor_write(uint8_t addr, int b) -{ - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); - __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); - __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, - SMB_CSR(R_SMB_START)); - - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); - return -1; - } else { - return 0; - } -} - -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - - cmos_minutes = xicor_read(X1241REG_MN); - cmos_minutes = BCD2BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - /* unlock writes to the CCR */ - xicor_write(X1241REG_SR, X1241REG_SR_WEL); - xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); - - if (abs(real_minutes - cmos_minutes) < 30) { - real_seconds = BIN2BCD(real_seconds); - real_minutes = BIN2BCD(real_minutes); - xicor_write(X1241REG_SC, real_seconds); - xicor_write(X1241REG_MN, real_minutes); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - xicor_write(X1241REG_SR, 0); - - printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds); - - return retval; -} - -static unsigned long __init get_swarm_time(void) -{ - unsigned int year, mon, day, hour, min, sec, y2k; - - sec = xicor_read(X1241REG_SC); - min = xicor_read(X1241REG_MN); - hour = xicor_read(X1241REG_HR); - - if (hour & X1241REG_HR_MIL) { - hour &= 0x3f; - } else { - if (hour & 0x20) - hour = (hour & 0xf) + 0x12; - } - - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - - day = xicor_read(X1241REG_DT); - mon = xicor_read(X1241REG_MO); - year = xicor_read(X1241REG_YR); - y2k = xicor_read(X1241REG_Y2K); - - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); - y2k = BCD2BIN(y2k); - - year += (y2k * 100); - - return mktime(year, mon, day, hour, min, sec); -} - -/* - * Bring up the timer at 100 Hz. - */ -void __init swarm_time_init(void) -{ - unsigned int flags; - int status; - - /* Set up the scd general purpose timer 0 to cpu 0 */ - sb1250_time_init(); - - /* Establish communication with the Xicor 1241 RTC */ - /* XXXKW how do I share the SMBus with the I2C subsystem? */ - - __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ)); - __raw_writeq(0, SMB_CSR(R_SMB_CONTROL)); - - if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) { - printk("x1241: couldn't detect on SWARM SMBus 1\n"); - } else { - if (status & X1241REG_SR_RTCF) - printk("x1241: battery failed -- time is probably wrong\n"); - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = get_swarm_time(); - xtime.tv_nsec = 0; - write_sequnlock_irqrestore(&xtime_lock, flags); - } -} diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index 6850a29defcd..acc9ba76c1a9 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -87,8 +87,8 @@ static struct platform_device snirm_82596_pdev = { static struct resource snirm_53c710_rsrc[] = { { - .start = 0xb9000000, - .end = 0xb90fffff, + .start = 0x19000000, + .end = 0x190fffff, .flags = IORESOURCE_MEM }, { @@ -106,8 +106,8 @@ static struct platform_device snirm_53c710_pdev = { static struct resource sc26xx_rsrc[] = { { - .start = 0xbc070000, - .end = 0xbc0700ff, + .start = 0x1c070000, + .end = 0x1c0700ff, .flags = IORESOURCE_MEM }, { diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 4bfda020fdc7..28a11d8605ce 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -88,8 +88,8 @@ static struct platform_device snirm_82596_rm200_pdev = { static struct resource snirm_53c710_rm200_rsrc[] = { { - .start = 0xb9000000, - .end = 0xb90fffff, + .start = 0x19000000, + .end = 0x190fffff, .flags = IORESOURCE_MEM }, { diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index a0c11efeaeeb..40c7c3eeafaf 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -138,7 +138,6 @@ extern void toshiba_rbtx4927_irq_setup(void); char *prom_getcmdline(void); #ifdef CONFIG_PCI -#define CONFIG_TX4927BUG_WORKAROUND #undef TX4927_SUPPORT_COMMAND_IO #undef TX4927_SUPPORT_PCI_66 int tx4927_cpu_clock = 100000000; /* 100MHz */ @@ -669,15 +668,7 @@ void tx4927_pci_setup(void) /* PCI->GB mappings (MEM 16MB) -not used */ tx4927_pcicptr->p2gm1plbase = 0xffffffff; -#ifdef CONFIG_TX4927BUG_WORKAROUND - /* - * TX4927-PCIC-BUG: P2GM1PUBASE must be 0 - * if P2GM0PUBASE was 0. - */ - tx4927_pcicptr->p2gm1pubase = 0; -#else tx4927_pcicptr->p2gm1pubase = 0xffffffff; -#endif tx4927_pcicptr->p2gmgbase[1] = 0; /* PCI->GB mappings (MEM 1MB) -not used */ @@ -910,16 +901,6 @@ void __init toshiba_rbtx4927_setup(void) if (tx4927_ccfg_toeon) tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; - /* SDRAMC fixup */ -#ifdef CONFIG_TX4927BUG_WORKAROUND - /* - * TX4927-BUG: INF 01-01-18/ BUG 01-01-22 - * G-bus timeout error detection is incorrect - */ - if (tx4927_ccfg_toeon) - tx4927_sdramcptr->tr |= 0x02000000; /* RCD:3tck */ -#endif - tx4927_pci_setup(); if (tx4927_using_backplane == 1) printk("backplane board IS installed\n"); diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile index f842783acd86..d0d84ec8d63d 100644 --- a/arch/mips/vr41xx/common/Makefile +++ b/arch/mips/vr41xx/common/Makefile @@ -2,4 +2,4 @@ # Makefile for common code of the NEC VR4100 series. # -obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o +obj-y += bcu.o cmu.o giu.o icu.o init.o irq.o pmu.o rtc.o siu.o type.o diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c new file mode 100644 index 000000000000..d21f6f2d22a3 --- /dev/null +++ b/arch/mips/vr41xx/common/giu.c @@ -0,0 +1,122 @@ +/* + * NEC VR4100 series GIU platform device. + * + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <asm/cpu.h> +#include <asm/vr41xx/giu.h> +#include <asm/vr41xx/irq.h> + +static struct resource giu_50pins_pullupdown_resource[] __initdata = { + { + .start = 0x0b000100, + .end = 0x0b00011f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x0b0002e0, + .end = 0x0b0002e3, + .flags = IORESOURCE_MEM, + }, + { + .start = GIUINT_IRQ, + .end = GIUINT_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource giu_36pins_resource[] __initdata = { + { + .start = 0x0f000140, + .end = 0x0f00015f, + .flags = IORESOURCE_MEM, + }, + { + .start = GIUINT_IRQ, + .end = GIUINT_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource giu_48pins_resource[] __initdata = { + { + .start = 0x0f000140, + .end = 0x0f000167, + .flags = IORESOURCE_MEM, + }, + { + .start = GIUINT_IRQ, + .end = GIUINT_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static int __init vr41xx_giu_add(void) +{ + struct platform_device *pdev; + struct resource *res; + unsigned int num; + int retval; + + pdev = platform_device_alloc("GIU", -1); + if (!pdev) + return -ENOMEM; + + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + pdev->id = GPIO_50PINS_PULLUPDOWN; + res = giu_50pins_pullupdown_resource; + num = ARRAY_SIZE(giu_50pins_pullupdown_resource); + break; + case CPU_VR4122: + case CPU_VR4131: + pdev->id = GPIO_36PINS; + res = giu_36pins_resource; + num = ARRAY_SIZE(giu_36pins_resource); + break; + case CPU_VR4133: + pdev->id = GPIO_48PINS_EDGE_SELECT; + res = giu_48pins_resource; + num = ARRAY_SIZE(giu_48pins_resource); + break; + default: + retval = -ENODEV; + goto err_free_device; + } + + retval = platform_device_add_resources(pdev, res, num); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(vr41xx_giu_add); diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c new file mode 100644 index 000000000000..cce605b3d688 --- /dev/null +++ b/arch/mips/vr41xx/common/rtc.c @@ -0,0 +1,117 @@ +/* + * NEC VR4100 series RTC platform device. + * + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <asm/cpu.h> +#include <asm/vr41xx/irq.h> + +static struct resource rtc_type1_resource[] __initdata = { + { + .start = 0x0b0000c0, + .end = 0x0b0000df, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x0b0001c0, + .end = 0x0b0001df, + .flags = IORESOURCE_MEM, + }, + { + .start = ELAPSEDTIME_IRQ, + .end = ELAPSEDTIME_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = RTCLONG1_IRQ, + .end = RTCLONG1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource rtc_type2_resource[] __initdata = { + { + .start = 0x0f000100, + .end = 0x0f00011f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x0f000120, + .end = 0x0f00013f, + .flags = IORESOURCE_MEM, + }, + { + .start = ELAPSEDTIME_IRQ, + .end = ELAPSEDTIME_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = RTCLONG1_IRQ, + .end = RTCLONG1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static int __init vr41xx_rtc_add(void) +{ + struct platform_device *pdev; + struct resource *res; + unsigned int num; + int retval; + + pdev = platform_device_alloc("RTC", -1); + if (!pdev) + return -ENOMEM; + + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + res = rtc_type1_resource; + num = ARRAY_SIZE(rtc_type1_resource); + break; + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + res = rtc_type2_resource; + num = ARRAY_SIZE(rtc_type2_resource); + break; + default: + retval = -ENODEV; + goto err_free_device; + } + + retval = platform_device_add_resources(pdev, res, num); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(vr41xx_rtc_add); diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c new file mode 100644 index 000000000000..a1e774142163 --- /dev/null +++ b/arch/mips/vr41xx/common/siu.c @@ -0,0 +1,120 @@ +/* + * NEC VR4100 series SIU platform device. + * + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> + +#include <asm/cpu.h> +#include <asm/vr41xx/siu.h> + +static unsigned int siu_type1_ports[SIU_PORTS_MAX] __initdata = { + PORT_VR41XX_SIU, + PORT_UNKNOWN, +}; + +static struct resource siu_type1_resource[] __initdata = { + { + .start = 0x0c000000, + .end = 0x0c00000a, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_IRQ, + .end = SIU_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned int siu_type2_ports[SIU_PORTS_MAX] __initdata = { + PORT_VR41XX_SIU, + PORT_VR41XX_DSIU, +}; + +static struct resource siu_type2_resource[] __initdata = { + { + .start = 0x0f000800, + .end = 0x0f00080a, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x0f000820, + .end = 0x0f000829, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_IRQ, + .end = SIU_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = DSIU_IRQ, + .end = DSIU_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static int __init vr41xx_siu_add(void) +{ + struct platform_device *pdev; + struct resource *res; + unsigned int num; + int retval; + + pdev = platform_device_alloc("SIU", -1); + if (!pdev) + return -ENOMEM; + + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + pdev->dev.platform_data = siu_type1_ports; + res = siu_type1_resource; + num = ARRAY_SIZE(siu_type1_resource); + break; + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + pdev->dev.platform_data = siu_type2_ports; + res = siu_type2_resource; + num = ARRAY_SIZE(siu_type2_resource); + break; + default: + retval = -ENODEV; + goto err_free_device; + } + + retval = platform_device_add_resources(pdev, res, num); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(vr41xx_siu_add); diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index c3ec9f1ec0f3..f9bca2d74b38 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -302,7 +302,7 @@ static void handle_break(struct pt_regs *regs) if (unlikely(iir == PARISC_BUG_BREAK_INSN && !user_mode(regs))) { /* check if a BUG() or WARN() trapped here. */ enum bug_trap_type tt; - tt = report_bug(regs->iaoq[0] & ~3); + tt = report_bug(regs->iaoq[0] & ~3, regs); if (tt == BUG_TRAP_TYPE_WARN) { regs->iaoq[0] += 4; regs->iaoq[1] += 4; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index cbfbd981cdcd..e641bb68d871 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -56,6 +56,9 @@ config GENERIC_FIND_NEXT_BIT bool default y +config ARCH_NO_VIRT_TO_BUS + def_bool PPC64 + config PPC bool default y @@ -439,8 +442,10 @@ config PCI infrastructure code to support PCI bus devices. config PCI_DOMAINS - bool - default PCI + def_bool PCI + +config PCI_SYSCALL + def_bool PCI config PCI_QSPAN bool "QSpan PCI" diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 93b2920effc5..a97e23ac1976 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -306,8 +306,10 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); dev->class = get_int_prop(node, "class-code", 0); + dev->revision = get_int_prop(node, "revision-id", 0); DBG(" class: 0x%x\n", dev->class); + DBG(" revision: 0x%x\n", dev->revision); dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index bf6445ac9f1c..3b8427e6283d 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -777,7 +777,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) return; if (!(regs->msr & MSR_PR) && /* not user-mode */ - report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) { + report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; return; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index de6c2efd0479..59e69f085cb4 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -176,7 +176,7 @@ static void __init pseries_mpic_init_IRQ(void) return; cascade_irq = irq_of_parse_and_map(cascade, 0); - if (cascade == NO_IRQ) { + if (cascade_irq == NO_IRQ) { printk(KERN_ERR "mpic: failed to map cascade interrupt"); return; } diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c index 4c0a7d732f69..615b6583d9b0 100644 --- a/arch/ppc/8260_io/enet.c +++ b/arch/ppc/8260_io/enet.c @@ -477,9 +477,9 @@ for (;;) { } else { skb_put(skb,pkt_len-4); /* Make room */ - eth_copy_and_sum(skb, + skb_copy_to_linear_data(skb, (unsigned char *)__va(bdp->cbd_bufaddr), - pkt_len-4, 0); + pkt_len-4); skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); } diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index cab395da25da..6f3ed6a72e0b 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -734,9 +734,9 @@ for (;;) { } else { skb_put(skb,pkt_len); /* Make room */ - eth_copy_and_sum(skb, + skb_copy_to_linear_data(skb, (unsigned char *)__va(bdp->cbd_bufaddr), - pkt_len, 0); + pkt_len); skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); } diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index e58288e14369..703d47eee436 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -506,9 +506,9 @@ for (;;) { } else { skb_put(skb,pkt_len-4); /* Make room */ - eth_copy_and_sum(skb, + skb_copy_to_linear_data(skb, cep->rx_vaddr[bdp - cep->rx_bd_base], - pkt_len-4, 0); + pkt_len-4); skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); } diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index d38335d2d710..0288279be9aa 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -725,7 +725,7 @@ while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) { fep->stats.rx_dropped++; } else { skb_put(skb,pkt_len-4); /* Make room */ - eth_copy_and_sum(skb, data, pkt_len-4, 0); + skb_copy_to_linear_data(skb, data, pkt_len-4); skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); } diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index ccce2a4a1522..6bdeeb70b157 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1237,8 +1237,10 @@ config PCI infrastructure code to support PCI bus devices. config PCI_DOMAINS - bool - default PCI + def_bool PCI + +config PCI_SYSCALL + def_bool PCI config MPC83xx_PCI2 bool "Support for 2nd PCI host controller" diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 5e723c4c2571..c2ec13bea006 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -633,12 +633,6 @@ void pcibios_make_OF_bus_map(void) { } -/* Add sysfs properties */ -void pcibios_add_platform_entries(struct pci_dev *pdev) -{ -} - - static int __init pcibios_init(void) { diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index aea100be52c8..0eaef7c8378b 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -619,7 +619,7 @@ void program_check_exception(struct pt_regs *regs) return; if (!(regs->msr & MSR_PR) && /* not user-mode */ - report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) { + report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; return; } diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index 8485a68cd475..032f4b7f4225 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -2415,7 +2415,6 @@ static struct bin_attribute mv64xxx_hs_reg_attr = { /* Hotswap register */ .attr = { .name = "hs_reg", .mode = S_IRUGO | S_IWUSR, - .owner = THIS_MODULE, }, .size = VAL_LEN_MAX, .read = mv64xxx_hs_reg_read, diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 68441e0e74b6..143ed8e154af 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -19,7 +19,7 @@ CFLAGS += -m31 AFLAGS += -m31 UTS_MACHINE := s390 STACK_SIZE := 8192 -CHECKFLAGS += -D__s390__ +CHECKFLAGS += -D__s390__ -msize-long else LDFLAGS := -m elf64_s390 MODFLAGS += -fpic -D__PIC__ diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 82b131ddd7ff..8b8f136d9cc7 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -295,8 +295,8 @@ static ssize_t sys_ipl_device_show(struct kset *kset, char *page) static struct subsys_attribute sys_ipl_device_attr = __ATTR(device, S_IRUGO, sys_ipl_device_show, NULL); -static ssize_t ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t ipl_parameter_read(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) { unsigned int size = IPL_PARMBLOCK_SIZE; @@ -312,14 +312,13 @@ static struct bin_attribute ipl_parameter_attr = { .attr = { .name = "binary_parameter", .mode = S_IRUGO, - .owner = THIS_MODULE, }, .size = PAGE_SIZE, .read = &ipl_parameter_read, }; -static ssize_t ipl_scp_data_read(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t ipl_scp_data_read(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) { unsigned int size = IPL_PARMBLOCK_START->ipl_info.fcp.scp_data_len; void *scp_data = &IPL_PARMBLOCK_START->ipl_info.fcp.scp_data; @@ -336,10 +335,9 @@ static struct bin_attribute ipl_scp_data_attr = { .attr = { .name = "scp_data", .mode = S_IRUGO, - .owner = THIS_MODULE, }, .size = PAGE_SIZE, - .read = &ipl_scp_data_read, + .read = ipl_scp_data_read, }; /* FCP ipl device attributes */ diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index ee9186f8fb08..81e03b9c3841 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -319,7 +319,7 @@ static void __kprobes inline do_trap(long interruption_code, int signr, else { enum bug_trap_type btt; - btt = report_bug(regs->psw.addr & PSW_ADDR_INSN); + btt = report_bug(regs->psw.addr & PSW_ADDR_INSN, regs); if (btt == BUG_TRAP_TYPE_WARN) return; die(str, regs, interruption_code); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 038179ecf6a9..d8ed6676ae86 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -55,8 +55,21 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool n +config SYS_SUPPORTS_PM + bool + config SYS_SUPPORTS_APM_EMULATION bool + select SYS_SUPPORTS_PM + +config SYS_SUPPORTS_SMP + bool + +config SYS_SUPPORTS_NUMA + bool + +config SYS_SUPPORTS_PCI + bool config ARCH_MAY_HAVE_PC_FDC bool @@ -81,24 +94,146 @@ source "init/Kconfig" menu "System type" -config SOLUTION_ENGINE - bool +source "arch/sh/mm/Kconfig" + +menu "Processor features" choice - prompt "SuperH system type" - default SH_UNKNOWN + prompt "Endianess selection" + default CPU_LITTLE_ENDIAN + help + Some SuperH machines can be configured for either little or big + endian byte order. These modes require different kernels. + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + +config CPU_BIG_ENDIAN + bool "Big Endian" + +endchoice + +config SH_FPU + bool "FPU support" + depends on CPU_SH4 + default y + help + Selecting this option will enable support for SH processors that + have FPU units (ie, SH77xx). + + This option must be set in order to enable the FPU. + +config SH_FPU_EMU + bool "FPU emulation support" + depends on !SH_FPU && EXPERIMENTAL + default n + help + Selecting this option will enable support for software FPU emulation. + Most SH-3 users will want to say Y here, whereas most SH-4 users will + want to say N. + +config SH_DSP + bool "DSP support" + default y if SH4AL_DSP || !CPU_SH4 + default n + help + Selecting this option will enable support for SH processors that + have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). + + This option must be set in order to enable the DSP. + +config SH_ADC + bool "ADC support" + depends on CPU_SH3 + default y + help + Selecting this option will allow the Linux kernel to use SH3 on-chip + ADC module. + + If unsure, say N. + +config SH_STORE_QUEUES + bool "Support for Store Queues" + depends on CPU_SH4 + help + Selecting this option will enable an in-kernel API for manipulating + the store queues integrated in the SH-4 processors. + +config SPECULATIVE_EXECUTION + bool "Speculative subroutine return" + depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL + help + This enables support for a speculative instruction fetch for + subroutine return. There are various pitfalls associated with + this, as outlined in the SH7780 hardware manual. + + If unsure, say N. + +config CPU_HAS_INTEVT + bool + +config CPU_HAS_PINT_IRQ + bool + +config CPU_HAS_MASKREG_IRQ + bool + +config CPU_HAS_INTC2_IRQ + bool + +config CPU_HAS_IPR_IRQ + bool + +config CPU_HAS_SR_RB + bool "CPU has SR.RB" + depends on CPU_SH3 || CPU_SH4 + default y + help + This will enable the use of SR.RB register bank usage. Processors + that are lacking this bit must have another method in place for + accomplishing what is taken care of by the banked registers. + + See <file:Documentation/sh/register-banks.txt> for further + information on SR.RB and register banking in the kernel in general. + +config CPU_HAS_PTEA + bool + +endmenu + +menu "Board support" + +config SOLUTION_ENGINE + bool config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 help Select SolutionEngine if configuring for a Hitachi SH7709 or SH7750 evaluation board. +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7722 + depends on CPU_SUBTYPE_SH7722 help Select 7722 SolutionEngine if configuring for a Hitachi SH772 evaluation board. @@ -106,7 +241,7 @@ config SH_7722_SOLUTION_ENGINE config SH_7751_SOLUTION_ENGINE bool "SolutionEngine7751" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7751 + depends on CPU_SUBTYPE_SH7751 help Select 7751 SolutionEngine if configuring for a Hitachi SH7751 evaluation board. @@ -114,7 +249,8 @@ config SH_7751_SOLUTION_ENGINE config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 evaluation board. @@ -122,7 +258,7 @@ config SH_7780_SOLUTION_ENGINE config SH_7300_SOLUTION_ENGINE bool "SolutionEngine7300" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7300 + depends on CPU_SUBTYPE_SH7300 help Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V) evaluation board. @@ -130,22 +266,22 @@ config SH_7300_SOLUTION_ENGINE config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7343 + depends on CPU_SUBTYPE_SH7343 help Select 7343 SolutionEngine if configuring for a Hitachi SH7343 (SH-Mobile 3AS) evaluation board. config SH_73180_SOLUTION_ENGINE - bool "SolutionEngine73180" + bool "SolutionEngine73180" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH73180 + depends on CPU_SUBTYPE_SH73180 help Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3) evaluation board. config SH_7751_SYSTEMH bool "SystemH7751R" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R help Select SystemH if you are configuring for a Renesas SystemH 7751R evaluation board. @@ -153,20 +289,17 @@ config SH_7751_SYSTEMH config SH_HP6XX bool "HP6XX" select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 help Select HP6XX if configuring for a HP jornada HP6xx. More information (hardware only) at <http://www.hp.com/jornada/>. -config SH_SATURN - bool "Saturn" - select CPU_SUBTYPE_SH7604 - help - Select Saturn if configuring for a SEGA Saturn. - config SH_DREAMCAST bool "Dreamcast" - select CPU_SUBTYPE_SH7091 + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. More information at @@ -175,6 +308,7 @@ config SH_DREAMCAST config SH_MPC1211 bool "Interface MPC1211" + depends on CPU_SUBTYPE_SH7751 && BROKEN help CTP/PCI-SH02 is a CPU module computer that is produced by Interface Corporation. @@ -182,6 +316,8 @@ config SH_MPC1211 config SH_SH03 bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 && BROKEN + select SYS_SUPPORTS_PCI help CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. @@ -189,7 +325,8 @@ config SH_SH03 config SH_SECUREEDGE5410 bool "SecureEdge5410" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the @@ -197,246 +334,76 @@ config SH_SECUREEDGE5410 config SH_HS7751RVOIP bool "HS7751RVOIP" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R help Select HS7751RVOIP if configuring for a Renesas Technology Sales VoIP board. config SH_7710VOIPGW bool "SH7710-VOIP-GW" - select CPU_SUBTYPE_SH7710 + depends on CPU_SUBTYPE_SH7710 help Select this option to build a kernel for the SH7710 based VOIP GW. config SH_RTS7751R2D bool "RTS7751R2D" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. config SH_HIGHLANDER bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI config SH_EDOSK7705 bool "EDOSK7705" - select CPU_SUBTYPE_SH7705 + depends on CPU_SUBTYPE_SH7705 config SH_SH4202_MICRODEV bool "SH4-202 MicroDev" - select CPU_SUBTYPE_SH4_202 + depends on CPU_SUBTYPE_SH4_202 help Select SH4-202 MicroDev if configuring for a SuperH MicroDev board with an SH4-202 CPU. config SH_LANDISK bool "LANDISK" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help I-O DATA DEVICE, INC. "LANDISK Series" support. config SH_TITAN bool "TITAN" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. config SH_SHMIN bool "SHMIN" - select CPU_SUBTYPE_SH7706 + depends on CPU_SUBTYPE_SH7706 help Select SHMIN if configuring for the SHMIN board. -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - config SH_LBOX_RE2 bool "L-BOX RE2" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. -config SH_UNKNOWN - bool "BareCPU" - help - "Bare CPU" aka "unknown" means an SH-based system which is not one - of the specific ones mentioned above, which means you need to enter - all sorts of stuff like CONFIG_MEMORY_START because the config - system doesn't already know what it is. You get a machine vector - without any platform-specific code in it, so things like the RTC may - not work. - - This option is for the early stages of porting to a new machine. - -endchoice +endmenu source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/mm/Kconfig" - -config CF_ENABLER - bool "Compact Flash Enabler support" - depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03 - ---help--- - Compact Flash is a small, removable mass storage device introduced - in 1994 originally as a PCMCIA device. If you say `Y' here, you - compile in support for Compact Flash devices directly connected to - a SuperH processor. A Compact Flash FAQ is available at - <http://www.compactflash.org/faqs/faq.htm>. - - If your board has "Directly Connected" CompactFlash at area 5 or 6, - you may want to enable this option. Then, you can use CF as - primary IDE drive (only tested for SanDisk). - - If in doubt, select 'N'. - -choice - prompt "Compact Flash Connection Area" - depends on CF_ENABLER - default CF_AREA6 - -config CF_AREA5 - bool "Area5" - help - If your board has "Directly Connected" CompactFlash, You should - select the area where your CF is connected to. - - - "Area5" if CompactFlash is connected to Area 5 (0x14000000) - - "Area6" if it is connected to Area 6 (0x18000000) - - "Area6" will work for most boards. - -config CF_AREA6 - bool "Area6" - -endchoice - -config CF_BASE_ADDR - hex - depends on CF_ENABLER - default "0xb8000000" if CF_AREA6 - default "0xb4000000" if CF_AREA5 - -menu "Processor features" - -choice - prompt "Endianess selection" - default CPU_LITTLE_ENDIAN - help - Some SuperH machines can be configured for either little or big - endian byte order. These modes require different kernels. - -config CPU_LITTLE_ENDIAN - bool "Little Endian" - -config CPU_BIG_ENDIAN - bool "Big Endian" - -endchoice - -config SH_FPU - bool "FPU support" - depends on !CPU_SH3 - default y - help - Selecting this option will enable support for SH processors that - have FPU units (ie, SH77xx). - - This option must be set in order to enable the FPU. - -config SH_FPU_EMU - bool "FPU emulation support" - depends on !SH_FPU && EXPERIMENTAL - default n - help - Selecting this option will enable support for software FPU emulation. - Most SH-3 users will want to say Y here, whereas most SH-4 users will - want to say N. - -config SH_DSP - bool "DSP support" - default y if SH4AL_DSP || !CPU_SH4 - default n - help - Selecting this option will enable support for SH processors that - have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). - - This option must be set in order to enable the DSP. - -config SH_ADC - bool "ADC support" - depends on CPU_SH3 - default y - help - Selecting this option will allow the Linux kernel to use SH3 on-chip - ADC module. - - If unsure, say N. - -config SH_STORE_QUEUES - bool "Support for Store Queues" - depends on CPU_SH4 - help - Selecting this option will enable an in-kernel API for manipulating - the store queues integrated in the SH-4 processors. - -config SPECULATIVE_EXECUTION - bool "Speculative subroutine return" - depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL - help - This enables support for a speculative instruction fetch for - subroutine return. There are various pitfalls associated with - this, as outlined in the SH7780 hardware manual. - - If unsure, say N. - -config CPU_HAS_INTEVT - bool - -config CPU_HAS_PINT_IRQ - bool - -config CPU_HAS_MASKREG_IRQ - bool - -config CPU_HAS_INTC2_IRQ - bool - -config CPU_HAS_IPR_IRQ - bool - -config CPU_HAS_SR_RB - bool "CPU has SR.RB" - depends on CPU_SH3 || CPU_SH4 - default y - help - This will enable the use of SR.RB register bank usage. Processors - that are lacking this bit must have another method in place for - accomplishing what is taken care of by the banked registers. - - See <file:Documentation/sh/register-banks.txt> for further - information on SR.RB and register banking in the kernel in general. - -config CPU_HAS_PTEA - bool - -endmenu - menu "Timer and clock configuration" config SH_TMU @@ -473,13 +440,13 @@ config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 default "31250000" if CPU_SUBTYPE_SH7619 + default "32000000" if CPU_SUBTYPE_SH7722 default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7206 - default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 - default "60000000" if CPU_SUBTYPE_SH7751 + default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 + default "50000000" help This option is used to specify the peripheral clock frequency. This is necessary for determining the reference clock value on @@ -487,8 +454,10 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" - default 0 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + default 6 if CPU_SUBTYPE_SH7206 + default 5 if CPU_SUBTYPE_SH7619 + default 0 help MD2 - MD0 pin setting. @@ -560,6 +529,7 @@ config CRASH_DUMP config SMP bool "Symmetric multi-processing support" + depends on SYS_SUPPORTS_SMP ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -584,6 +554,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP + default "4" if CPU_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this @@ -623,6 +594,7 @@ config BOOT_LINK_OFFSET config UBC_WAKEUP bool "Wakeup UBC on startup" + depends on CPU_SH4 help Selecting this option will wakeup the User Break Controller (UBC) on startup. Although the UBC is left in an awake state when the processor @@ -651,8 +623,8 @@ menu "Bus options" # we're not using PCMCIA, so we make it dependent on # PCMCIA outright. -- PFM. config ISA - bool - default y if PCMCIA + def_bool y + depends on PCMCIA && HD6446X_SERIES help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -690,6 +662,49 @@ config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 +config CF_ENABLER + bool "Compact Flash Enabler support" + depends on SOLUTION_ENGINE || SH_SH03 + ---help--- + Compact Flash is a small, removable mass storage device introduced + in 1994 originally as a PCMCIA device. If you say `Y' here, you + compile in support for Compact Flash devices directly connected to + a SuperH processor. A Compact Flash FAQ is available at + <http://www.compactflash.org/faqs/faq.htm>. + + If your board has "Directly Connected" CompactFlash at area 5 or 6, + you may want to enable this option. Then, you can use CF as + primary IDE drive (only tested for SanDisk). + + If in doubt, select 'N'. + +choice + prompt "Compact Flash Connection Area" + depends on CF_ENABLER + default CF_AREA6 + +config CF_AREA5 + bool "Area5" + help + If your board has "Directly Connected" CompactFlash, You should + select the area where your CF is connected to. + + - "Area5" if CompactFlash is connected to Area 5 (0x14000000) + - "Area6" if it is connected to Area 6 (0x18000000) + + "Area6" will work for most boards. + +config CF_AREA6 + bool "Area6" + +endchoice + +config CF_BASE_ADDR + hex + depends on CF_ENABLER + default "0xb8000000" if CF_AREA6 + default "0xb4000000" if CF_AREA5 + source "arch/sh/drivers/pci/Kconfig" source "drivers/pci/Kconfig" @@ -707,7 +722,7 @@ source "fs/Kconfig.binfmt" endmenu menu "Power management options (EXPERIMENTAL)" -depends on EXPERIMENTAL +depends on EXPERIMENTAL && SYS_SUPPORTS_PM source kernel/power/Kconfig diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index b56307294b67..52f6a99c8ecc 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -52,6 +52,10 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. +config DEBUG_BOOTMEM + depends on DEBUG_KERNEL + bool "Debug BOOTMEM initialization" + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL @@ -82,6 +86,7 @@ config SH_KGDB bool "Include KGDB kernel debugger" select FRAME_POINTER select DEBUG_INFO + depends on CPU_SH3 || CPU_SH4 help Include in-kernel hooks for kgdb, the Linux kernel source level debugger. See <http://kgdb.sourceforge.net/> for more information. diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 883b03b040c4..77fecc62a056 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -34,20 +34,20 @@ isa-y := $(isa-y)-nofpu endif endif -cflags-$(CONFIG_CPU_SH2) := -m2 -cflags-$(CONFIG_CPU_SH2A) := -m2a $(call cc-option,-m2a-nofpu,) -cflags-$(CONFIG_CPU_SH3) := -m3 -cflags-$(CONFIG_CPU_SH4) := -m4 \ +cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) +cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \ + $(call cc-option,-m2a-nofpu,) +cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,) +cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) -cflags-$(CONFIG_CPU_SH4A) := $(call cc-option,-m4a,) $(call cc-option,-m4a-nofpu,) +cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ + $(call cc-option,-m4a-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding -cflags-$(CONFIG_SH_DSP) += -Wa,-dsp - cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') @@ -87,39 +87,37 @@ core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ # Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) := se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) := se/7780 -machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 -machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 -machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_SATURN) := saturn -machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_MPC1211) := mpc1211 -machdir-$(CONFIG_SH_SH03) := sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear -machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip -machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) := renesas/r7780rp -machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw -machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev -machdir-$(CONFIG_SH_LANDISK) := landisk -machdir-$(CONFIG_SH_TITAN) := titan -machdir-$(CONFIG_SH_SHMIN) := shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) := lboxre2 -machdir-$(CONFIG_SH_UNKNOWN) := unknown - -incdir-y := $(notdir $(machdir-y)) -incdir-$(CONFIG_SH_HP6XX) := hp6xx +machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x +machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 +machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 +machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300 +machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 +machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) += se/73180 +machdir-$(CONFIG_SH_HP6XX) += hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += dreamcast +machdir-$(CONFIG_SH_MPC1211) += mpc1211 +machdir-$(CONFIG_SH_SH03) += sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear +machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip +machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh +machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp +machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw +machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev +machdir-$(CONFIG_SH_LANDISK) += landisk +machdir-$(CONFIG_SH_TITAN) += titan +machdir-$(CONFIG_SH_SHMIN) += shmin +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 +machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 + +incdir-y := $(notdir $(machdir-y)) ifneq ($(machdir-y),) -core-y += arch/sh/boards/$(machdir-y)/ +core-y += $(addprefix arch/sh/boards/, \ + $(filter-out ., $(patsubst %,%/,$(machdir-y)))) endif # Companion chips @@ -157,19 +155,31 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ # Most boards have their own mach directories. For the ones that # don't, just reference the parent directory so the semantics are # kept roughly the same. +# +# When multiple boards are compiled in at the same time, preference +# for the mach link is given to whichever has a directory for its +# headers. However, this is only a workaround until platforms that +# can live in the same kernel image back away from relying on the +# mach link. include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ include/config/auto.conf FORCE - @echo -n ' SYMLINK include/asm-sh/mach -> ' $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \ - echo -e 'include/asm-sh/$(incdir-y)'; \ - ln -fsn $(incdir-prefix)$(incdir-y) \ + $(Q)rm -f include/asm-sh/mach + $(Q)for i in $(incdir-y); do \ + if [ -d $(incdir-prefix)$$i ]; then \ + echo -n ' SYMLINK include/asm-sh/mach -> '; \ + echo -e "include/asm-sh/$$i"; \ + ln -fsn $(incdir-prefix)$$i \ include/asm-sh/mach; \ else \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix) include/asm-sh/mach; \ - fi + if [ ! -d include/asm-sh/mach ]; then \ + echo -n ' SYMLINK include/asm-sh/mach -> '; \ + echo -e 'include/asm-sh'; \ + ln -fsn $(incdir-prefix) include/asm-sh/mach; \ + fi; \ + fi; \ + done @touch $@ archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools @@ -188,7 +198,9 @@ compressed: zImage archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-sh/machtypes.h +CLEAN_FILES += include/asm-sh/machtypes.h \ + include/asm-sh/cpu include/asm-sh/.cpu \ + include/asm-sh/mach include/asm-sh/.mach define archhelp @echo '* zImage - Compressed kernel image' diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index f13017eeeb27..8799df6e866a 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -60,7 +60,7 @@ static void __init dreamcast_setup(char **cmdline_p) #endif } -struct sh_machine_vector mv_dreamcast __initmv = { +static struct sh_machine_vector mv_dreamcast __initmv = { .mv_name = "Sega Dreamcast", .mv_setup = dreamcast_setup, .mv_irq_demux = systemasic_irq_demux, @@ -70,4 +70,3 @@ struct sh_machine_vector mv_dreamcast __initmv = { .mv_consistent_free = dreamcast_consistent_free, #endif }; -ALIAS_MV(dreamcast) diff --git a/arch/sh/boards/hp6xx/mach.c b/arch/sh/boards/hp6xx/mach.c deleted file mode 100644 index 08dbba910f74..000000000000 --- a/arch/sh/boards/hp6xx/mach.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/mach.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the HP680 - */ -#include <asm/machvec.h> -#include <asm/hd64461.h> -#include <asm/io.h> -#include <asm/irq.h> - -struct sh_machine_vector mv_hp6xx __initmv = { - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, - - .mv_inb = hd64461_inb, - .mv_inw = hd64461_inw, - .mv_inl = hd64461_inl, - .mv_outb = hd64461_outb, - .mv_outw = hd64461_outw, - .mv_outl = hd64461_outl, - - .mv_inb_p = hd64461_inb_p, - .mv_inw_p = hd64461_inw, - .mv_inl_p = hd64461_inl, - .mv_outb_p = hd64461_outb_p, - .mv_outw_p = hd64461_outw, - .mv_outl_p = hd64461_outl, - - .mv_insb = hd64461_insb, - .mv_insw = hd64461_insw, - .mv_insl = hd64461_insl, - .mv_outsb = hd64461_outsb, - .mv_outsw = hd64461_outsw, - .mv_outsl = hd64461_outsl, - - .mv_readw = hd64461_readw, - .mv_writew = hd64461_writew, - - .mv_irq_demux = hd64461_irq_demux, -}; - -ALIAS_MV(hp6xx) diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 6aeee85c9785..7ae708930bac 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -98,10 +98,9 @@ static void __init hp6xx_setup(char **cmdline_p) } device_initcall(hp6xx_devices_setup); -struct sh_machine_vector mv_hp6xx __initmv = { +static struct sh_machine_vector mv_hp6xx __initmv = { .mv_name = "hp6xx", .mv_setup = hp6xx_setup, .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, .mv_irq_demux = hd64461_irq_demux, }; -ALIAS_MV(hp6xx) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index f953c7427769..eda71763ecc5 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -97,10 +97,9 @@ static void __init landisk_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_landisk __initmv = { +static struct sh_machine_vector mv_landisk __initmv = { .mv_name = "LANDISK", .mv_nr_irqs = 72, .mv_setup = landisk_setup, .mv_init_irq = init_landisk_IRQ, }; -ALIAS_MV(landisk) diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c index 4e20f7c63bf3..9c830fdc411b 100644 --- a/arch/sh/boards/lboxre2/setup.c +++ b/arch/sh/boards/lboxre2/setup.c @@ -77,9 +77,8 @@ device_initcall(lboxre2_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_lboxre2 __initmv = { +static struct sh_machine_vector mv_lboxre2 __initmv = { .mv_name = "L-BOX RE2", .mv_nr_irqs = 72, .mv_init_irq = init_lboxre2_IRQ, }; -ALIAS_MV(lboxre2) diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 1a0604b23ce0..8ce03e00b0ae 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -338,11 +338,10 @@ static void __init mpc1211_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_mpc1211 __initmv = { +static struct sh_machine_vector mv_mpc1211 __initmv = { .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)", .mv_setup = mpc1211_setup, .mv_nr_irqs = 48, .mv_irq_demux = mpc1211_irq_demux, .mv_init_irq = init_mpc1211_IRQ, }; -ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c index ec5be0107719..f076c45308dd 100644 --- a/arch/sh/boards/renesas/edosk7705/setup.c +++ b/arch/sh/boards/renesas/edosk7705/setup.c @@ -21,7 +21,7 @@ static void __init sh_edosk7705_init_irq(void) /* * The Machine Vector */ -struct sh_machine_vector mv_edosk7705 __initmv = { +static struct sh_machine_vector mv_edosk7705 __initmv = { .mv_name = "EDOSK7705", .mv_nr_irqs = 80, @@ -41,4 +41,3 @@ struct sh_machine_vector mv_edosk7705 __initmv = { .mv_isa_port2addr = sh_edosk7705_isa_port2addr, .mv_init_irq = sh_edosk7705_init_irq, }; -ALIAS_MV(edosk7705) diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index f7d0e304d899..fa5fa3920222 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -89,7 +89,7 @@ static void __init hs7751rvoip_setup(char **cmdline_p) printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); } -struct sh_machine_vector mv_hs7751rvoip __initmv = { +static struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_name = "HS7751RVoIP", .mv_setup = hs7751rvoip_setup, .mv_nr_irqs = 72, @@ -118,4 +118,3 @@ struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_init_irq = hs7751rvoip_init_irq, .mv_ioport_map = hs7751rvoip_ioport_map, }; -ALIAS_MV(hs7751rvoip) diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig index 9fb11641fe13..fc8f28e04ba3 100644 --- a/arch/sh/boards/renesas/r7780rp/Kconfig +++ b/arch/sh/boards/renesas/r7780rp/Kconfig @@ -6,18 +6,18 @@ choice config SH_R7780RP bool "R7780RP-1 board support" - select CPU_SUBTYPE_SH7780 + depends on CPU_SUBTYPE_SH7780 config SH_R7780MP bool "R7780MP board support" - select CPU_SUBTYPE_SH7780 + depends on CPU_SUBTYPE_SH7780 help Selecting this option will enable support for the mass-production version of the R7780RP. If in doubt, say Y. config SH_R7785RP bool "R7785RP board support" - select CPU_SUBTYPE_SH7785 + depends on CPU_SUBTYPE_SH7785 endchoice diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 0727ef92f2b3..5afb864a1ec5 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -166,10 +166,9 @@ static void __init highlander_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_highlander __initmv = { +static struct sh_machine_vector mv_highlander __initmv = { .mv_name = "Highlander", .mv_nr_irqs = 109, .mv_setup = highlander_setup, .mv_init_irq = highlander_init_irq, }; -ALIAS_MV(highlander) diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 593f26a85e9c..656fda30ef70 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -176,7 +176,7 @@ static void __init rts7751r2d_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_rts7751r2d __initmv = { +static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_name = "RTS7751R2D", .mv_setup = rts7751r2d_setup, .mv_nr_irqs = 72, @@ -189,4 +189,3 @@ struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_consistent_free = voyagergx_consistent_free, #endif }; -ALIAS_MV(rts7751r2d) diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index 180810b12107..2dce8bd97f90 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -88,9 +88,8 @@ static void __init sh7710voipgw_init_irq(void) /* * The Machine Vector */ -struct sh_machine_vector mv_sh7710voipgw __initmv = { +static struct sh_machine_vector mv_sh7710voipgw __initmv = { .mv_name = "SH7710 VoIP Gateway", .mv_nr_irqs = 104, .mv_init_irq = sh7710voipgw_init_irq, }; -ALIAS_MV(sh7710voipgw) diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c index 936117659b74..ee78af842778 100644 --- a/arch/sh/boards/renesas/systemh/setup.c +++ b/arch/sh/boards/renesas/systemh/setup.c @@ -28,7 +28,7 @@ static void __init sh7751systemh_init_irq(void) make_systemh_irq(0xb); /* Ethernet interrupt */ } -struct sh_machine_vector mv_7751systemh __initmv = { +static struct sh_machine_vector mv_7751systemh __initmv = { .mv_name = "7751 SystemH", .mv_nr_irqs = 72, @@ -55,4 +55,3 @@ struct sh_machine_vector mv_7751systemh __initmv = { .mv_init_irq = sh7751systemh_init_irq, }; -ALIAS_MV(7751systemh) diff --git a/arch/sh/boards/saturn/Makefile b/arch/sh/boards/saturn/Makefile deleted file mode 100644 index 75a3042e252e..000000000000 --- a/arch/sh/boards/saturn/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Sega Saturn specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_SMP) += smp.o - diff --git a/arch/sh/boards/saturn/io.c b/arch/sh/boards/saturn/io.c deleted file mode 100644 index c6e4f7f2e686..000000000000 --- a/arch/sh/boards/saturn/io.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/sh/boards/saturn/io.c - * - * I/O routines for the Sega Saturn. - * - * Copyright (C) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include <asm/saturn/io.h> -#include <asm/machvec.h> - -unsigned long saturn_isa_port2addr(unsigned long offset) -{ - return offset; -} - -void *saturn_ioremap(unsigned long offset, unsigned long size) -{ - return (void *)offset; -} - -void saturn_iounmap(void *addr) -{ -} - diff --git a/arch/sh/boards/saturn/irq.c b/arch/sh/boards/saturn/irq.c deleted file mode 100644 index 15d1d3f0f787..000000000000 --- a/arch/sh/boards/saturn/irq.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * arch/sh/boards/saturn/irq.c - * - * Copyright (C) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> - -/* - * Interrupts map out as follows: - * - * Vector Name Mask - * - * 64 VBLANKIN 0x0001 - * 65 VBLANKOUT 0x0002 - * 66 HBLANKIN 0x0004 - * 67 TIMER0 0x0008 - * 68 TIMER1 0x0010 - * 69 DSPEND 0x0020 - * 70 SOUNDREQUEST 0x0040 - * 71 SYSTEMMANAGER 0x0080 - * 72 PAD 0x0100 - * 73 LEVEL2DMAEND 0x0200 - * 74 LEVEL1DMAEND 0x0400 - * 75 LEVEL0DMAEND 0x0800 - * 76 DMAILLEGAL 0x1000 - * 77 SRITEDRAWEND 0x2000 - * 78 ABUS 0x8000 - * - */ -#define SATURN_IRQ_MIN 64 /* VBLANKIN */ -#define SATURN_IRQ_MAX 78 /* ABUS */ - -#define SATURN_IRQ_MASK 0xbfff - -static inline u32 saturn_irq_mask(unsigned int irq_nr) -{ - u32 mask; - - mask = (1 << (irq_nr - SATURN_IRQ_MIN)); - mask <<= (irq_nr == SATURN_IRQ_MAX); - mask &= SATURN_IRQ_MASK; - - return mask; -} - -static inline void mask_saturn_irq(unsigned int irq_nr) -{ - u32 mask; - - mask = ctrl_inl(SATURN_IMR); - mask |= saturn_irq_mask(irq_nr); - ctrl_outl(mask, SATURN_IMR); -} - -static inline void unmask_saturn_irq(unsigned int irq_nr) -{ - u32 mask; - - mask = ctrl_inl(SATURN_IMR); - mask &= ~saturn_irq_mask(irq_nr); - ctrl_outl(mask, SATURN_IMR); -} - -static void disable_saturn_irq(unsigned int irq_nr) -{ - mask_saturn_irq(irq_nr); -} - -static void enable_saturn_irq(unsigned int irq_nr) -{ - unmask_saturn_irq(irq_nr); -} - -static void mask_and_ack_saturn_irq(unsigned int irq_nr) -{ - mask_saturn_irq(irq_nr); -} - -static void end_saturn_irq(unsigned int irq_nr) -{ - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - unmask_saturn_irq(irq_nr); -} - -static unsigned int startup_saturn_irq(unsigned int irq_nr) -{ - unmask_saturn_irq(irq_nr); - - return 0; -} - -static void shutdown_saturn_irq(unsigned int irq_nr) -{ - mask_saturn_irq(irq_nr); -} - -static struct hw_interrupt_type saturn_int = { - .typename = "Saturn", - .enable = enable_saturn_irq, - .disable = disable_saturn_irq, - .ack = mask_and_ack_saturn_irq, - .end = end_saturn_irq, - .startup = startup_saturn_irq, - .shutdown = shutdown_saturn_irq, -}; - -int saturn_irq_demux(int irq_nr) -{ - /* FIXME */ - return irq_nr; -} - diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c deleted file mode 100644 index a3a37c9aad2e..000000000000 --- a/arch/sh/boards/saturn/setup.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/sh/boards/saturn/setup.c - * - * Hardware support for the Sega Saturn. - * - * Copyright (c) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> -#include <asm/machvec.h> -#include <asm/mach/io.h> - -extern int saturn_irq_demux(int irq_nr); - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_saturn __initmv = { - .mv_name = "Sega Saturn", - .mv_nr_irqs = 80, /* Fix this later */ - - .mv_isa_port2addr = saturn_isa_port2addr, - .mv_irq_demux = saturn_irq_demux, - - .mv_ioremap = saturn_ioremap, - .mv_iounmap = saturn_iounmap, -}; -ALIAS_MV(saturn) diff --git a/arch/sh/boards/saturn/smp.c b/arch/sh/boards/saturn/smp.c deleted file mode 100644 index 76460918c9cd..000000000000 --- a/arch/sh/boards/saturn/smp.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/sh/boards/saturn/smp.c - * - * SMP support for the Sega Saturn. - * - * Copyright (c) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/smp.h> - -#include <asm/saturn/smpc.h> - -extern void start_secondary(void); - -void __smp_send_ipi(unsigned int cpu, unsigned int action) -{ - /* Nothing here yet .. */ -} - -unsigned int __smp_probe_cpus(void) -{ - /* - * This is just a straightforward master/slave configuration, - * and probing isn't really supported.. - */ - return 2; -} - -/* - * We're only allowed to do byte-access to SMPC registers. In - * addition to which, we treat them as write-only, since - * reading from them will return undefined data. - */ -static inline void smpc_slave_stop(unsigned int cpu) -{ - smpc_barrier(); - ctrl_outb(1, SMPC_STATUS); - - ctrl_outb(SMPC_CMD_SSHOFF, SMPC_COMMAND); - smpc_barrier(); -} - -static inline void smpc_slave_start(unsigned int cpu) -{ - ctrl_outb(1, SMPC_STATUS); - ctrl_outb(SMPC_CMD_SSHON, SMPC_COMMAND); - - smpc_barrier(); -} - -void __smp_slave_init(unsigned int cpu) -{ - register unsigned long vbr; - void **entry; - - __asm__ __volatile__ ("stc vbr, %0\n\t" : "=r" (vbr)); - entry = (void **)(vbr + 0x310 + 0x94); - - smpc_slave_stop(cpu); - - *(void **)entry = (void *)start_secondary; - - smpc_slave_start(cpu); -} - diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index ca714879f559..a074b62505ef 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -70,7 +70,7 @@ __initcall(se7206_devices_setup); * The Machine Vector */ -struct sh_machine_vector mv_se __initmv = { +static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 256, .mv_inb = se7206_inb, @@ -96,4 +96,3 @@ struct sh_machine_vector mv_se __initmv = { .mv_init_irq = init_se7206_IRQ, }; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index f1960956bad0..eb469f5b6e97 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -46,7 +46,7 @@ __initcall(se7300_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_7300se __initmv = { +static struct sh_machine_vector mv_7300se __initmv = { .mv_name = "SolutionEngine 7300", .mv_nr_irqs = 109, .mv_inb = sh7300se_inb, @@ -72,4 +72,3 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_init_irq = init_7300se_IRQ, }; -ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index e143017c8975..1deee8556642 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -46,7 +46,7 @@ __initcall(se73180_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_73180se __initmv = { +static struct sh_machine_vector mv_73180se __initmv = { .mv_name = "SolutionEngine 73180", .mv_nr_irqs = 108, .mv_inb = sh73180se_inb, @@ -73,4 +73,3 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_init_irq = init_73180se_IRQ, .mv_irq_demux = shmse_irq_demux, }; -ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 3fdb16f2cef1..8fec155e2ff7 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -64,7 +64,7 @@ static void __init sh7343se_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_7343se __initmv = { +static struct sh_machine_vector mv_7343se __initmv = { .mv_name = "SolutionEngine 7343", .mv_setup = sh7343se_setup, .mv_nr_irqs = 108, @@ -92,4 +92,3 @@ struct sh_machine_vector mv_7343se __initmv = { .mv_init_irq = init_7343se_IRQ, .mv_irq_demux = shmse_irq_demux, }; -ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c index 52d2c4d5d2fa..1d0ef7faa10d 100644 --- a/arch/sh/boards/se/7619/setup.c +++ b/arch/sh/boards/se/7619/setup.c @@ -15,8 +15,7 @@ * The Machine Vector */ -struct sh_machine_vector mv_se __initmv = { +static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 108, }; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index c8eccff77a04..cdb0807928a5 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -15,46 +15,7 @@ #include <asm/io.h> #include <asm/se.h> -/* - * If the problem of make_ipr_irq is solved, - * this code will become unnecessary. :-) - */ -static void se770x_disable_ipr_irq(unsigned int irq) -{ - struct ipr_data *p = get_irq_chip_data(irq); - - ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); -} - -static void se770x_enable_ipr_irq(unsigned int irq) -{ - struct ipr_data *p = get_irq_chip_data(irq); - - ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); -} - -static struct irq_chip se770x_irq_chip = { - .name = "MS770xSE-FPGA", - .mask = se770x_disable_ipr_irq, - .unmask = se770x_enable_ipr_irq, - .mask_ack = se770x_disable_ipr_irq, -}; - -void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs) -{ - int i; - - for (i = 0; i < nr_irqs; i++) { - unsigned int irq = table[i].irq; - disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &se770x_irq_chip, - handle_level_irq, "level"); - set_irq_chip_data(irq, &table[i]); - se770x_enable_ipr_irq(irq); - } -} - -static struct ipr_data se770x_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* * Super I/O (Just mimic PC): * 1: keyboard @@ -68,46 +29,67 @@ static struct ipr_data se770x_ipr_map[] = { */ #if defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is default value */ - { 13, 0, 8, 0x0f-13 ,BCR_ILCRA}, - { 5 , 0, 4, 0x0f- 5 ,BCR_ILCRA}, - { 10, 0, 0, 0x0f-10, BCR_ILCRB}, - { 7 , 0, 4, 0x0f- 7, BCR_ILCRC}, - { 3 , 0, 0, 0x0f- 3, BCR_ILCRC}, - { 1 , 0, 12, 0x0f- 1, BCR_ILCRD}, - { 12, 0, 4, 0x0f-12, BCR_ILCRD}, /* LAN */ - { 2 , 0, 8, 0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */ - { 6 , 0, 4, 0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */ - { 14, 0, 0, 0x0f-14, BCR_ILCRE}, /* PCIRQ0 */ - { 0 , 0, 12, 0x0f , BCR_ILCRF}, - { 4 , 0, 4, 0x0f- 4, BCR_ILCRF}, - { 8 , 0, 12, 0x0f- 8, BCR_ILCRG}, - { 9 , 0, 8, 0x0f- 9, BCR_ILCRG}, - { 11, 0, 4, 0x0f-11, BCR_ILCRG}, + { 13, 0, 8, 0x0f-13, }, + { 5 , 0, 4, 0x0f- 5, }, + { 10, 1, 0, 0x0f-10, }, + { 7 , 2, 4, 0x0f- 7, }, + { 3 , 2, 0, 0x0f- 3, }, + { 1 , 3, 12, 0x0f- 1, }, + { 12, 3, 4, 0x0f-12, }, /* LAN */ + { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */ + { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */ + { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */ + { 0 , 5, 12, 0x0f , }, + { 4 , 5, 4, 0x0f- 4, }, + { 8 , 6, 12, 0x0f- 8, }, + { 9 , 6, 8, 0x0f- 9, }, + { 11, 6, 4, 0x0f-11, }, #else - { 14, 0, 8, 0x0f-14 ,BCR_ILCRA}, - { 12, 0, 4, 0x0f-12 ,BCR_ILCRA}, - { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB}, - { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC}, - { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC}, - { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC}, - { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC}, - { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD}, + { 14, 0, 8, 0x0f-14, }, + { 12, 0, 4, 0x0f-12, }, + { 8, 1, 4, 0x0f- 8, }, + { 6, 2, 12, 0x0f- 6, }, + { 5, 2, 8, 0x0f- 5, }, + { 4, 2, 4, 0x0f- 4, }, + { 3, 2, 0, 0x0f- 3, }, + { 1, 3, 12, 0x0f- 1, }, #if defined(CONFIG_STNIC) /* ST NIC */ - { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */ + { 10, 3, 4, 0x0f-10, }, /* LAN */ #endif /* MRSHPC IRQs setting */ - { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */ - { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */ - { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */ - { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */ + { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */ + { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */ + { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */ + { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* NOTE: #2 and #13 are not used on PC */ - { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */ - { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */ + { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */ + { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */ #endif }; +static unsigned long ipr_offsets[] = { + BCR_ILCRA, + BCR_ILCRB, + BCR_ILCRC, + BCR_ILCRD, + BCR_ILCRE, + BCR_ILCRF, + BCR_ILCRG, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + .chip = { + .name = "IPR-se770x", + }, +}; + /* * Initialize IRQ setting */ @@ -122,5 +104,5 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); - make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 17a2631de3ba..2962da148f3f 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -122,7 +122,7 @@ device_initcall(se_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_se __initmv = { +static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_setup = smsc_setup, #if defined(CONFIG_CPU_SH4) @@ -160,4 +160,3 @@ struct sh_machine_vector mv_se __initmv = { .mv_init_irq = init_se_IRQ, }; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c index 099e5deb77f8..26cff0efda40 100644 --- a/arch/sh/boards/se/7722/irq.c +++ b/arch/sh/boards/se/7722/irq.c @@ -19,15 +19,24 @@ #define INTC_INTMSK0 0xFFD00044 #define INTC_INTMSKCLR0 0xFFD00064 +struct se7722_data { + unsigned char irq; + unsigned char ipr_idx; + unsigned char shift; + unsigned short priority; + unsigned long addr; +}; + + static void disable_se7722_irq(unsigned int irq) { - struct ipr_data *p = get_irq_chip_data(irq); + struct se7722_data *p = get_irq_chip_data(irq); ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr ); } static void enable_se7722_irq(unsigned int irq) { - struct ipr_data *p = get_irq_chip_data(irq); + struct se7722_data *p = get_irq_chip_data(irq); ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr ); } @@ -38,7 +47,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = { .mask_ack = disable_se7722_irq, }; -static struct ipr_data ipr_irq_table[] = { +static struct se7722_data ipr_irq_table[] = { /* irq ,idx,sft, priority , addr */ { MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } , { MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } , diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 636ca6c987e0..6cca6cbc8069 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -137,7 +137,7 @@ static void __init se7722_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_se7722 __initmv = { +static struct sh_machine_vector mv_se7722 __initmv = { .mv_name = "Solution Engine 7722" , .mv_setup = se7722_setup , .mv_nr_irqs = 109 , @@ -145,4 +145,3 @@ struct sh_machine_vector mv_se7722 __initmv = { .mv_irq_demux = se7722_irq_demux, }; -ALIAS_MV(se7722) diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index e4c63a48296c..c3d12590e5db 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -14,44 +14,31 @@ #include <asm/irq.h> #include <asm/se7751.h> -static struct ipr_data se7751_ipr_map[] = { - /* Leave old Solution Engine code in for reference. */ -#if defined(CONFIG_SH_SOLUTION_ENGINE) - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 0 - * 4: serial 1 - * 5: printer - * 6: floppy - * 8: rtc - * 12: mouse - * 14: ide0 - */ - { 14, BCR_ILCRA, 2, 0x0f-14 }, - { 12, BCR_ILCRA, 1, 0x0f-12 }, - { 8, BCR_ILCRB, 1, 0x0f- 8 }, - { 6, BCR_ILCRC, 3, 0x0f- 6 }, - { 5, BCR_ILCRC, 2, 0x0f- 5 }, - { 4, BCR_ILCRC, 1, 0x0f- 4 }, - { 3, BCR_ILCRC, 0, 0x0f- 3 }, - { 1, BCR_ILCRD, 3, 0x0f- 1 }, +static struct ipr_data ipr_irq_table[] = { + { 13, 3, 3, 2 }, + /* Add additional entries here as drivers are added and tested. */ +}; - { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ +static unsigned long ipr_offsets[] = { + BCR_ILCRA, + BCR_ILCRB, + BCR_ILCRC, + BCR_ILCRD, + BCR_ILCRE, + BCR_ILCRF, + BCR_ILCRG, +}; - { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ - { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ - { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ - { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ - { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ -#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) - { 13, BCR_ILCRD, 3, 2 }, - /* Add additional entries here as drivers are added and tested. */ -#endif + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-se7751", + }, }; /* @@ -59,5 +46,5 @@ static struct ipr_data se7751_ipr_map[] = { */ void __init init_7751se_IRQ(void) { - make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 52c7bfa57c2c..7873d07e40c1 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -48,7 +48,7 @@ __initcall(se7751_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_7751se __initmv = { +static struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_nr_irqs = 72, @@ -71,4 +71,3 @@ struct sh_machine_vector mv_7751se __initmv = { .mv_init_irq = init_7751se_IRQ, }; -ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c index 3d0625c2d07b..874914746009 100644 --- a/arch/sh/boards/se/7780/irq.c +++ b/arch/sh/boards/se/7780/irq.c @@ -16,28 +16,6 @@ #include <asm/io.h> #include <asm/se7780.h> -#define INTC_INTMSK0 0xFFD00044 -#define INTC_INTMSKCLR0 0xFFD00064 - -static void disable_se7780_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset); -} - -static void enable_se7780_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset); -} - -static struct irq_chip se7780_irq_chip __read_mostly = { - .name = "SE7780", - .mask = disable_se7780_irq, - .unmask = enable_se7780_irq, - .mask_ack = disable_se7780_irq, -}; - static struct intc2_data intc2_irq_table[] = { { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */ { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */ @@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = { { 0 , 0, 24, 0, 24, 3 }, /* SM501 */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0, /* N/A */ + .msk_base = 0xffd00044, + .mskclr_base = 0xffd00064, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-se7780", + }, +}; + /* * Initialize IRQ setting */ void __init init_se7780_IRQ(void) { - int i ; - /* enable all interrupt at FPGA */ ctrl_outw(0, FPGA_INTMSK1); /* mask SM501 interrupt */ @@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void) /* FPGA + 0x0A */ ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); - for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) { - disable_irq_nosync(intc2_irq_table[i].irq); - set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip, - handle_level_irq, "level"); - set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] ); - disable_se7780_irq(intc2_irq_table[i].irq); - } + register_intc2_controller(&intc2_irq_desc); } diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index df7d08a24c9f..723f2fd4d55b 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -113,10 +113,9 @@ static void __init se7780_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_se7780 __initmv = { +static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Solution Engine 7780" , .mv_setup = se7780_setup , .mv_nr_irqs = 111 , .mv_init_irq = init_se7780_IRQ, }; -ALIAS_MV(se7780) diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index c069c444b4ec..9c031a8c0a1c 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -15,17 +15,33 @@ #include <asm/sh03/sh03.h> #include <asm/addrspace.h> -static struct ipr_data sh03_ipr_map[] = { - { IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, - { IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, - { IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, - { IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, +static struct ipr_data ipr_irq_table[] = { + { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, + { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, + { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, + { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRD, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh03", + }, }; static void __init init_sh03_IRQ(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } extern void *cf_io_base; @@ -74,11 +90,10 @@ static int __init sh03_devices_setup(void) } __initcall(sh03_devices_setup); -struct sh_machine_vector mv_sh03 __initmv = { +static struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, .mv_nr_irqs = 48, .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, }; -ALIAS_MV(sh03) diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index 4a9df4a6b034..dfd124509f42 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -6,28 +6,44 @@ * SHMIN Support. */ #include <linux/init.h> +#include <linux/irq.h> #include <asm/machvec.h> #include <asm/shmin.h> #include <asm/clock.h> -#include <asm/irq.h> #include <asm/io.h> #define PFC_PHCR 0xa400010eUL #define INTC_ICR1 0xa4000010UL #define INTC_IPRC 0xa4000016UL -static struct ipr_data shmin_ipr_map[] = { - { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, - { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, - { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, - { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, +static struct ipr_data ipr_irq_table[] = { + { 32, 0, 0, 0 }, + { 33, 0, 4, 0 }, + { 34, 0, 8, 8 }, + { 35, 0, 12, 0 }, +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRC, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-shmin", + }, }; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. - make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) @@ -43,9 +59,8 @@ static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) } -struct sh_machine_vector mv_shmin __initmv = { +static struct sh_machine_vector mv_shmin __initmv = { .mv_name = "SHMIN", .mv_init_irq = init_shmin_irq, .mv_ioport_map = shmin_ioport_map, }; -ALIAS_MV(shmin) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 650fb3645947..84271d85a8dd 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -68,11 +68,27 @@ module_init(eraseconfig_init); * IRL3 = crypto */ -static struct ipr_data snapgear_ipr_map[] = { - make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); - make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); - make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); - make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +static struct ipr_data ipr_irq_table[] = { + { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, + { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, + { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, + { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRD, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-snapgear", + }, }; static void __init init_snapgear_IRQ(void) @@ -82,7 +98,7 @@ static void __init init_snapgear_IRQ(void) printk("Setup SnapGear IRQ/IPR ...\n"); - make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } /* @@ -96,7 +112,7 @@ static void __init snapgear_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_snapgear __initmv = { +static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", .mv_setup = snapgear_setup, .mv_nr_irqs = 72, @@ -117,4 +133,3 @@ struct sh_machine_vector mv_snapgear __initmv = { .mv_init_irq = init_snapgear_IRQ, }; -ALIAS_MV(snapgear) diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c index 6396cea1c896..fc8cd06d66cf 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/superh/microdev/setup.c @@ -371,7 +371,7 @@ static void __init microdev_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_sh4202_microdev __initmv = { +static struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_name = "SH4-202 MicroDev", .mv_setup = microdev_setup, .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */ @@ -403,4 +403,3 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_heartbeat = microdev_heartbeat, #endif }; -ALIAS_MV(sh4202_microdev) diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index 6bcd939bfaed..606d25a4b870 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -12,7 +12,7 @@ #include <asm/titan.h> #include <asm/io.h> -static struct ipr_data titan_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR idx, shift, prio */ { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */ { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */ @@ -20,15 +20,33 @@ static struct ipr_data titan_ipr_map[] = { { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */ }; +static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */ + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-titan", + }, +}; static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ ipr_irq_enable_irlm(); /* register ipr irqs */ - make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } -struct sh_machine_vector mv_titan __initmv = { +static struct sh_machine_vector mv_titan __initmv = { .mv_name = "Titan", .mv_inb = titan_inb, @@ -52,4 +70,3 @@ struct sh_machine_vector mv_titan __initmv = { .mv_init_irq = init_titan_irq, }; -ALIAS_MV(titan) diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile deleted file mode 100644 index 7d18f408b0c5..000000000000 --- a/arch/sh/boards/unknown/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for unknown SH boards -# - -obj-y := setup.o - diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c deleted file mode 100644 index bee4612de59b..000000000000 --- a/arch/sh/boards/unknown/setup.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/arch/sh/boards/unknown/setup.c - * - * Copyright (C) 2002 Paul Mundt - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup code for an unknown machine (internal peripherals only) - * - * This is the simplest of all boards, and serves only as a quick and dirty - * method to start debugging a new board during bring-up until proper board - * setup code is written. - */ -#include <linux/init.h> -#include <asm/machvec.h> - -struct sh_machine_vector mv_unknown __initmv = { - .mv_name = "Unknown", -}; -ALIAS_MV(unknown) diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 0582ca8346b6..2e516e9a6ede 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -13,10 +13,8 @@ config VOYAGERGX are additional GPIO bits that can be used to interface to external as well. -# A board must have defined HD6446X_SERIES in order to see these config HD6446X_SERIES - bool "HD6446x support" - default n + bool choice prompt "HD6446x options" @@ -25,7 +23,6 @@ choice config HD64461 bool "Hitachi HD64461 companion chip support" - depends on CPU_SUBTYPE_SH7709 ---help--- The Hitachi HD64461 provides an interface for the SH7709 CPU, supporting a LCD controller, @@ -40,7 +37,6 @@ config HD64461 config HD64465 bool "Hitachi HD64465 companion chip support" - depends on CPU_SUBTYPE_SH7750 ---help--- The Hitachi HD64465 provides an interface for the SH7750 CPU, supporting a LCD controller, diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 8b6b5a779de8..3fdd270eecf7 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,15 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 10:51:55 2006 +# Linux kernel version: 2.6.22-rc4 +# Sat Jul 7 03:47:45 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -28,6 +36,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set @@ -35,8 +44,10 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -50,14 +61,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -93,44 +109,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -CONFIG_SH_DREAMCAST=y -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -138,79 +119,93 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -CONFIG_CPU_SUBTYPE_SH7750=y +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set CONFIG_CPU_SUBTYPE_SH7091=y -CONFIG_CPU_SUBTYPE_SH7750R=y +# CONFIG_CPU_SUBTYPE_SH7750R is not set # CONFIG_CPU_SUBTYPE_SH7750S is not set # CONFIG_CPU_SUBTYPE_SH7751 is not set # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # -# Timer support +# Board support +# +CONFIG_SH_DREAMCAST=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=49876504 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set # # CPU Frequency scaling @@ -232,6 +227,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 CONFIG_NR_DMA_CHANNELS_BOOL=y @@ -240,17 +236,23 @@ CONFIG_NR_DMA_CHANNELS=9 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -269,33 +271,23 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3" # Bus options # CONFIG_PCI=y -# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -303,13 +295,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -327,30 +319,20 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -376,7 +358,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -394,10 +385,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -408,6 +395,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -421,13 +409,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support +# Misc devices # +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -436,10 +427,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -455,6 +442,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # @@ -470,15 +458,7 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -521,47 +501,16 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set - -# -# Token Ring devices -# +# CONFIG_SC92031 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -604,17 +553,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -660,10 +611,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -680,14 +627,8 @@ CONFIG_SH_WDT=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -695,11 +636,7 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -711,44 +648,51 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -763,13 +707,17 @@ CONFIG_FB_PVR2=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set # @@ -789,10 +737,6 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -800,7 +744,6 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -808,6 +751,12 @@ CONFIG_LOGO_SUPERH_CLUT224=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -823,10 +772,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -874,10 +819,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -957,6 +904,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -965,17 +917,18 @@ CONFIG_PROFILING=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options @@ -991,8 +944,13 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig new file mode 100644 index 000000000000..17f7402b31d8 --- /dev/null +++ b/arch/sh/configs/r7780mp_defconfig @@ -0,0 +1,1223 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Mon Jun 11 10:24:57 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +CONFIG_CPU_SUBTYPE_SH7780=y +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +# CONFIG_32BIT is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_DSP is not set +CONFIG_SH_STORE_QUEUES=y +CONFIG_SPECULATIVE_EXECUTION=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC2_IRQ=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Board support +# +# CONFIG_SH_7780_SOLUTION_ENGINE is not set +CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_R7780RP is not set +CONFIG_SH_R7780MP=y +# CONFIG_SH_R7785RP is not set + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=32000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +CONFIG_PUSH_SWITCH=y + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +# CONFIG_PCNET32_NAPI is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE_NAPI is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_OSS_OBSOLETE is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 0f5ec649daf8..5c29338532da 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc3 -# Mon Mar 12 14:26:33 2007 +# Linux kernel version: 2.6.22-rc4 +# Thu Jul 12 12:33:15 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set @@ -60,13 +63,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -102,55 +110,11 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -CONFIG_SH_HIGHLANDER=y -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_R7780MP is not set -CONFIG_SH_R7785RP=y - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -158,10 +122,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -170,23 +131,12 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set CONFIG_CPU_SUBTYPE_SH7785=y - -# -# SH4AL-DSP Processor Support -# +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -194,6 +144,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 @@ -201,6 +152,12 @@ CONFIG_MEMORY_SIZE=0x08000000 CONFIG_32BIT=y # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -215,17 +172,17 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # # Processor features @@ -241,12 +198,22 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y # +# Board support +# +CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_R7780MP is not set +CONFIG_SH_R7785RP=y + +# # Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 -CONFIG_NO_IDLE_HZ=y CONFIG_SH_PCLK_FREQ=50000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set # # CPU Frequency scaling @@ -261,7 +228,6 @@ CONFIG_SH_PCLK_FREQ=50000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -278,7 +244,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -300,31 +266,22 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -332,7 +289,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -377,20 +333,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m @@ -417,8 +361,16 @@ CONFIG_LLC=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -438,10 +390,6 @@ CONFIG_FW_LOADER=m # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -475,12 +423,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # +# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -509,6 +455,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -554,10 +501,6 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -580,6 +523,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -629,6 +573,7 @@ CONFIG_PATA_PLATFORM=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # @@ -644,15 +589,7 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -673,10 +610,7 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -689,55 +623,26 @@ CONFIG_R8169=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -789,6 +694,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -831,14 +737,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set @@ -848,10 +748,7 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -864,16 +761,15 @@ CONFIG_HW_RANDOM=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -885,22 +781,30 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -908,7 +812,7 @@ CONFIG_FB=y # CONFIG_FB_TILEBLITTING is not set # -# Frambuffer hardware drivers +# Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set @@ -930,12 +834,11 @@ CONFIG_FB=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -952,13 +855,10 @@ CONFIG_SOUND=m # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OBSOLETE_OSS is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ICH is not set +# CONFIG_OSS_OBSOLETE is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set # # HID Devices @@ -982,10 +882,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -1026,18 +922,30 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# # -# RTC drivers +# SPI RTC drivers +# + +# +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -1051,14 +959,6 @@ CONFIG_RTC_DRV_SH=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # File systems # CONFIG_EXT2_FS=y @@ -1157,6 +1057,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1239,7 +1140,6 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1266,6 +1166,7 @@ CONFIG_FORCED_INLINING=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_4KSTACKS is not set @@ -1300,6 +1201,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1328,7 +1230,9 @@ CONFIG_CRYPTO_DES=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 87ab9080fd1d..f2f2a3c9c32d 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,18 +1,22 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 6 14:40:15 2006 +# Linux kernel version: 2.6.22-rc4 +# Fri Jun 15 19:37:46 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,8 +38,10 @@ CONFIG_LOCALVERSION="" # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -48,12 +54,17 @@ CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set # # Loadable module support @@ -83,53 +94,10 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -CONFIG_SH_7206_SOLUTION_ENGINE=y -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# CONFIG_CPU_SUBTYPE_SH7206=y - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -137,10 +105,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -149,32 +114,28 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -184,35 +145,42 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # # Processor features # # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_SH_FPU is not set # CONFIG_SH_FPU_EMU is not set # CONFIG_SH_DSP is not set +CONFIG_CPU_HAS_IPR_IRQ=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7206_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_CMT=y # CONFIG_SH_MTU2 is not set CONFIG_SH_TIMER_IRQ=140 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_MD=6 +# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -227,11 +195,11 @@ CONFIG_SH_CLK_MD=6 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers # +# CONFIG_HEARTBEAT is not set # CONFIG_PUSH_SWITCH is not set # @@ -239,10 +207,11 @@ CONFIG_SH_CLK_MD=6 # CONFIG_HZ_100=y # CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -252,23 +221,18 @@ CONFIG_PREEMPT_NONE=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_FLAT=y @@ -277,11 +241,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -289,7 +248,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set # CONFIG_UNIX is not set # CONFIG_NET_KEY is not set @@ -314,25 +272,14 @@ CONFIG_IP_FIB_HASH=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -358,7 +305,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -375,10 +331,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -393,6 +345,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -424,7 +377,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -452,16 +404,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -471,6 +420,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -479,18 +429,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -499,10 +444,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -511,19 +452,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -531,10 +459,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -544,27 +468,14 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -604,6 +515,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -639,29 +551,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -674,27 +572,30 @@ CONFIG_SERIAL_CORE_CONSOLE=y # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -703,6 +604,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# # USB support # # CONFIG_USB_ARCH_HAS_HCD is not set @@ -717,10 +624,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -802,7 +705,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -816,7 +718,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -849,6 +750,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -861,14 +767,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set # # Security options @@ -883,8 +786,13 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 20ac7f4c53fb..3a3c3c1f507d 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,18 +1,22 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 6 16:35:36 2006 +# Linux kernel version: 2.6.22-rc4 +# Fri Jun 15 19:43:06 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -31,8 +35,10 @@ CONFIG_LOCALVERSION="" # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -45,12 +51,17 @@ CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set # # Loadable module support @@ -80,52 +91,9 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -CONFIG_SH_7619_SOLUTION_ENGINE=y -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH2=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set CONFIG_CPU_SUBTYPE_SH7619=y - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -133,10 +101,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -145,32 +110,28 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -180,34 +141,41 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set CONFIG_SH_WRITETHROUGH=y -# CONFIG_SH_OCRAM is not set # # Processor features # # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_SH_FPU is not set # CONFIG_SH_FPU_EMU is not set # CONFIG_SH_DSP is not set +CONFIG_CPU_HAS_IPR_IRQ=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7619_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_CMT=y CONFIG_SH_TIMER_IRQ=86 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=31250000 CONFIG_SH_CLK_MD=5 +# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -222,11 +190,11 @@ CONFIG_SH_CLK_MD=5 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers # +# CONFIG_HEARTBEAT is not set # CONFIG_PUSH_SWITCH is not set # @@ -234,10 +202,11 @@ CONFIG_SH_CLK_MD=5 # CONFIG_HZ_100=y # CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -247,23 +216,18 @@ CONFIG_PREEMPT_NONE=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_FLAT=y @@ -272,11 +236,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # # CONFIG_NET is not set @@ -295,10 +254,6 @@ CONFIG_BINFMT_ZFLAT=y # # Connector - unified userspace <-> kernelspace linker # - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -313,6 +268,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -344,7 +300,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -372,16 +327,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -391,6 +343,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -398,17 +351,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -417,10 +365,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -429,19 +373,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # ISDN subsystem # @@ -471,6 +402,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -506,29 +438,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -541,26 +459,29 @@ CONFIG_SERIAL_CORE_CONSOLE=y # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -569,6 +490,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# # USB support # # CONFIG_USB_ARCH_HAS_HCD is not set @@ -583,10 +510,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -668,7 +591,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -682,7 +604,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -715,14 +636,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set # # Security options @@ -737,8 +655,13 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index ca4c663dfa37..764b813c4051 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc7 -# Fri Apr 27 16:30:30 2007 +# Linux kernel version: 2.6.22-rc4 +# Wed Jun 20 18:08:04 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -60,14 +63,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -103,57 +112,12 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -CONFIG_SH_7722_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7780_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y CONFIG_CPU_SHX2=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -162,10 +126,6 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set - -# -# SH-4 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -174,23 +134,11 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y @@ -198,15 +146,21 @@ CONFIG_CPU_SUBTYPE_SH7722=y # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 -# CONFIG_32BIT is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y -CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=1 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -216,26 +170,25 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # # Processor features @@ -252,12 +205,20 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y # +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7722_SOLUTION_ENGINE=y + +# # Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -CONFIG_NO_IDLE_HZ=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y # # CPU Frequency scaling @@ -272,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -290,7 +250,6 @@ CONFIG_HZ_250=y CONFIG_HZ=250 CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -# CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -307,7 +266,11 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -# CONFIG_PCI is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -315,22 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -338,7 +291,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -375,20 +327,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,7 +354,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -432,10 +381,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -464,10 +409,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -496,6 +438,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -511,10 +454,6 @@ CONFIG_BLK_DEV_SD=y # # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_PATA_PLATFORM=y @@ -525,19 +464,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -545,10 +471,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -558,27 +480,14 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -627,6 +536,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -667,14 +577,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -682,10 +586,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -698,16 +598,15 @@ CONFIG_HW_RANDOM=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -719,16 +618,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -757,10 +659,6 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -800,18 +698,30 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -825,14 +735,6 @@ CONFIG_RTC_DRV_SH=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # File systems # CONFIG_EXT2_FS=y @@ -937,23 +839,24 @@ CONFIG_MSDOS_PARTITION=y # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set # CONFIG_SH_KGDB is not set # @@ -973,8 +876,10 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig new file mode 100644 index 000000000000..219bad558b10 --- /dev/null +++ b/arch/sh/configs/shx3_defconfig @@ -0,0 +1,756 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Wed Jun 20 14:09:27 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_UTS_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +CONFIG_CPU_SUBTYPE_SHX3=y +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC2_IRQ=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_PATA_PLATFORM=y + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +# CONFIG_PROVE_LOCKING is not set +CONFIG_LOCKDEP=y +CONFIG_DEBUG_LOCKDEP=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_4KSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 99935f9daf4b..333898077c7c 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -36,23 +36,6 @@ config NR_DMA_CHANNELS support. Setting this to a higher value allows for cascading DMACs with additional channels. -config DMA_PAGE_OPS - bool "Use DMAC for page copy/clear" - depends on SH_DMA && BROKEN - help - Selecting this option will use a dual-address mode configured channel - in the SH DMAC for copy_page()/clear_page(). Primarily a performance - hack. - -config DMA_PAGE_OPS_CHANNEL - depends on DMA_PAGE_OPS - int "DMA channel for sh memory-manager page copy/clear" - default "3" - help - This allows the specification of the dual address dma channel, - in case channel 3 is unavailable. On the SH4, channels 1,2, and 3 - are dual-address capable. - config SH_DMABRG bool "SH7760 DMABRG support" depends on CPU_SUBTYPE_SH7760 diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 6d1cbbe6745c..fbc6f2c8649f 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -1,5 +1,6 @@ config PCI bool "PCI support" + depends on SYS_SUPPORTS_PCI help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 9104b6257644..1f141a8ba17c 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -4,10 +4,9 @@ extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o signal.o traps.o irq.o \ - ptrace.o setup.o time.o sys_sh.o semaphore.o \ - io.o io_generic.o sh_ksyms.o syscalls.o \ - debugtraps.o +obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \ + semaphore.o setup.o signal.o sys_sh.o syscalls.o \ + time.o topology.o traps.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ @@ -17,7 +16,7 @@ obj-$(CONFIG_CF_ENABLER) += cf-enabler.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o -obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_MODULES) += sh_ksyms.o module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index ebc73b85094a..1c3b99642e1c 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -75,11 +75,7 @@ static int __init cf_init_default(void) #if defined(CONFIG_CPU_SH4) allocate_cf_area(); #endif -#if defined(CONFIG_SH_UNKNOWN) - /* This should be done in each board's init_xxx_irq. */ - make_imask_irq(14); - disable_irq(14); -#endif + return 0; } diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 6451ad630174..9172e97dc26a 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -21,8 +21,7 @@ #include <asm/cacheflush.h> #include <asm/cache.h> #include <asm/io.h> - -extern void detect_cpu_and_cache_system(void); +#include <asm/ubc.h> /* * Generic wrapper for command line arguments to disable on-chip @@ -152,15 +151,6 @@ static void __init cache_init(void) flags |= CCR_CACHE_CB; #endif -#ifdef CONFIG_SH_OCRAM - /* Turn on OCRAM -- halve the OC */ - flags |= CCR_CACHE_ORA; - current_cpu_data.dcache.sets >>= 1; - - current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * - current_cpu_data.dcache.linesz; -#endif - ctrl_outl(flags, CCR); back_to_P1(); } @@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void) } #endif -#ifdef CONFIG_UBC_WAKEUP /* * Some brain-damaged loaders decided it would be a good idea to put * the UBC to sleep. This causes some issues when it comes to things @@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void) * we wake it up and hope that all is well. */ ubc_wakeup(); -#endif - speculative_execution_init(); } diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index d8e22f4ff0f0..cc5221390e09 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -13,36 +13,31 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <asm/smp.h> -#if defined(CONFIG_CPU_SUBTYPE_SH7760) -#define INTC2_BASE 0xfe080000 -#define INTC2_INTMSK (INTC2_BASE + 0x40) -#define INTC2_INTMSKCLR (INTC2_BASE + 0x60) -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) -#define INTC2_BASE 0xffd40000 -#define INTC2_INTMSK (INTC2_BASE + 0x38) -#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c) -#endif +static inline struct intc2_desc *get_intc2_desc(unsigned int irq) +{ + struct irq_chip *chip = get_irq_chip(irq); + return (void *)((char *)chip - offsetof(struct intc2_desc, chip)); +} static void disable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset); + struct intc2_desc *d = get_intc2_desc(irq); + + ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset + + (hard_smp_processor_id() * 4)); } static void enable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset); -} + struct intc2_desc *d = get_intc2_desc(irq); -static struct irq_chip intc2_irq_chip = { - .name = "INTC2", - .mask = disable_intc2_irq, - .unmask = enable_intc2_irq, - .mask_ack = disable_intc2_irq, -}; + ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset + + (hard_smp_processor_id() * 4)); +} /* * Setup an INTC2 style interrupt. @@ -56,30 +51,36 @@ static struct irq_chip intc2_irq_chip = { * * in the intc2_data table. */ -void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs) +void register_intc2_controller(struct intc2_desc *desc) { int i; - for (i = 0; i < nr_irqs; i++) { + desc->chip.mask = disable_intc2_irq; + desc->chip.unmask = enable_intc2_irq; + desc->chip.mask_ack = disable_intc2_irq; + + for (i = 0; i < desc->nr_irqs; i++) { unsigned long ipr, flags; - struct intc2_data *p = table + i; + struct intc2_data *p = desc->intc2_data + i; disable_irq_nosync(p->irq); - /* Set the priority level */ - local_irq_save(flags); + if (desc->prio_base) { + /* Set the priority level */ + local_irq_save(flags); - ipr = ctrl_inl(INTC2_BASE + p->ipr_offset); - ipr &= ~(0xf << p->ipr_shift); - ipr |= p->priority << p->ipr_shift; - ctrl_outl(ipr, INTC2_BASE + p->ipr_offset); + ipr = ctrl_inl(desc->prio_base + p->ipr_offset); + ipr &= ~(0xf << p->ipr_shift); + ipr |= p->priority << p->ipr_shift; + ctrl_outl(ipr, desc->prio_base + p->ipr_offset); - local_irq_restore(flags); + local_irq_restore(flags); + } - set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip, + set_irq_chip_and_handler_name(p->irq, &desc->chip, handle_level_irq, "level"); set_irq_chip_data(p->irq, p); - enable_intc2_irq(p->irq); + disable_intc2_irq(p->irq); } } diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 210280b6fddf..98e84f40c713 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -22,58 +22,57 @@ #include <linux/io.h> #include <linux/interrupt.h> +static inline struct ipr_desc *get_ipr_desc(unsigned int irq) +{ + struct irq_chip *chip = get_irq_chip(irq); + return (void *)((char *)chip - offsetof(struct ipr_desc, chip)); +} + static void disable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); + unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx]; /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); + ctrl_outw(ctrl_inw(addr) & (0xffff ^ (0xf << p->shift)), addr); } static void enable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); + unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx]; /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); + ctrl_outw(ctrl_inw(addr) | (p->priority << p->shift), addr); } -static struct irq_chip ipr_irq_chip = { - .name = "IPR", - .mask = disable_ipr_irq, - .unmask = enable_ipr_irq, - .mask_ack = disable_ipr_irq, -}; - -unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak)); -unsigned int map_ipridx_to_addr(int idx) -{ - return 0; -} +/* + * The shift value is now the number of bits to shift, not the number of + * bits/4. This is to make it easier to read the value directly from the + * datasheets. The IPR address is calculated using the ipr_offset table. + */ -void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) +void register_ipr_controller(struct ipr_desc *desc) { int i; - for (i = 0; i < nr_irqs; i++) { - unsigned int irq = table[i].irq; + desc->chip.mask = disable_ipr_irq; + desc->chip.unmask = enable_ipr_irq; + desc->chip.mask_ack = disable_ipr_irq; - if (!irq) - irq = table[i].irq = i; + for (i = 0; i < desc->nr_irqs; i++) { + struct ipr_data *p = desc->ipr_data + i; - /* could the IPR index be mapped, if not we ignore this */ - if (!table[i].addr) { - table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); - if (!table[i].addr) - continue; - } + BUG_ON(p->ipr_idx >= desc->nr_offsets); + BUG_ON(!desc->ipr_offsets[p->ipr_idx]); - disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &ipr_irq_chip, + disable_irq_nosync(p->irq); + set_irq_chip_and_handler_name(p->irq, &desc->chip, handle_level_irq, "level"); - set_irq_chip_data(irq, &table[i]); - enable_ipr_irq(irq); + set_irq_chip_data(p->irq, p); + disable_ipr_irq(p->irq); } } -EXPORT_SYMBOL(make_ipr_irq); + +EXPORT_SYMBOL(register_ipr_controller); #if !defined(CONFIG_CPU_HAS_PINT_IRQ) int ipr_irq_demux(int irq) diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index c16dc8fec489..ee8f1fe84b08 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -311,6 +311,7 @@ restore_all: rte nop + .align 2 #ifdef CONFIG_TRACE_IRQFLAGS 1: .long trace_hardirqs_off #endif diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index 108e81b682ed..abbf17427e52 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -9,23 +9,14 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - - #include <linux/init.h> +#include <linux/smp.h> #include <asm/processor.h> #include <asm/cache.h> int __init detect_cpu_and_cache_system(void) { -#if defined(CONFIG_CPU_SUBTYPE_SH7604) - current_cpu_data.type = CPU_SH7604; - current_cpu_data.dcache.ways = 4; - current_cpu_data.dcache.way_incr = (1<<10); - current_cpu_data.dcache.sets = 64; - current_cpu_data.dcache.entry_shift = 4; - current_cpu_data.dcache.linesz = L1_CACHE_BYTES; - current_cpu_data.dcache.flags = 0; -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) +#if defined(CONFIG_CPU_SUBTYPE_SH7619) current_cpu_data.type = CPU_SH7619; current_cpu_data.dcache.ways = 4; current_cpu_data.dcache.way_incr = (1<<12); diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index f83ff8a68f35..1a107fe22dde 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -52,7 +52,7 @@ static int __init sh7619_devices_setup(void) } __initcall(sh7619_devices_setup); -static struct ipr_data sh7619_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { { 86, 0, 4, 2 }, /* CMI0 */ { 88, 1, 12, 3 }, /* SCIF0_ERI */ { 89, 1, 12, 3 }, /* SCIF0_RXI */ @@ -68,7 +68,7 @@ static struct ipr_data sh7619_ipr_map[] = { { 99, 1, 4, 3 }, /* SCIF2_TXI */ }; -static unsigned int ipr_offsets[] = { +static unsigned long ipr_offsets[] = { 0xf8080000, /* IPRC */ 0xf8080002, /* IPRD */ 0xf8080004, /* IPRE */ @@ -76,15 +76,19 @@ static unsigned int ipr_offsets[] = { 0xf8080008, /* IPRG */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7619", + }, +}; void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 4ed9110632bc..b6e3a6351fa6 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -57,7 +57,7 @@ static int __init sh7206_devices_setup(void) } __initcall(sh7206_devices_setup); -static struct ipr_data sh7206_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { { 140, 7, 12, 2 }, /* CMI0 */ { 164, 8, 4, 2 }, /* MTU2_TGI1A */ { 240, 13, 12, 3 }, /* SCIF0_BRI */ @@ -78,7 +78,7 @@ static struct ipr_data sh7206_ipr_map[] = { { 255, 13, 0, 3 }, /* SCIF3_TXI */ }; -static unsigned int ipr_offsets[] = { +static unsigned long ipr_offsets[] = { 0xfffe0818, /* IPR01 */ 0xfffe081a, /* IPR02 */ 0, /* unused */ @@ -95,15 +95,19 @@ static unsigned int ipr_offsets[] = { 0xfffe0c10, /* IPR14 */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7206", + }, +}; void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index b0b59d4a33ca..d8e122971c3e 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -340,8 +340,27 @@ ENTRY(vbr_base) general_exception: mov.l 1f, k2 mov.l 2f, k3 +#ifdef CONFIG_CPU_SUBTYPE_SHX3 + mov.l @k2, k2 + + ! Is EXPEVT larger than 0x800? + mov #0x8, k0 + shll8 k0 + cmp/hs k0, k2 + bf 0f + + ! then add 0x580 (k2 is 0xd80 or 0xda0) + mov #0x58, k0 + shll2 k0 + shll2 k0 + add k0, k2 +0: + bra handle_exception + nop +#else bra handle_exception mov.l @k2, k2 +#endif .align 2 1: .long EXPEVT 2: .long ret_from_exception diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 1983fb7ad6ea..a55b8ce2c54c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -48,7 +48,7 @@ static int __init sh7705_devices_setup(void) } __initcall(sh7705_devices_setup); -static struct ipr_data sh7705_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 8, 2 }, /* TMU1 TUNI */ @@ -70,25 +70,29 @@ static struct ipr_data sh7705_ipr_map[] = { }; static unsigned long ipr_offsets[] = { - 0xFFFFFEE2 /* 0: IPRA */ -, 0xFFFFFEE4 /* 1: IPRB */ -, 0xA4000016 /* 2: IPRC */ -, 0xA4000018 /* 3: IPRD */ -, 0xA400001A /* 4: IPRE */ -, 0xA4080000 /* 5: IPRF */ -, 0xA4080002 /* 6: IPRG */ -, 0xA4080004 /* 7: IPRH */ + 0xFFFFFEE2, /* 0: IPRA */ + 0xFFFFFEE4, /* 1: IPRB */ + 0xA4000016, /* 2: IPRC */ + 0xA4000018, /* 3: IPRD */ + 0xA400001A, /* 4: IPRE */ + 0xA4080000, /* 5: IPRF */ + 0xA4080002, /* 6: IPRG */ + 0xA4080004, /* 7: IPRH */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7705", + }, +}; -void __init init_IRQ_ipr() +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c index c7d7c35fc834..d79ec0c0522f 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -12,6 +12,26 @@ #include <linux/serial.h> #include <asm/sci.h> +static struct resource rtc_resources[] = { + [0] = { + .start = 0xfffffec0, + .end = 0xfffffec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xfffffe80, @@ -41,8 +61,16 @@ static struct platform_device sci_device = { }, }; +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + static struct platform_device *sh7709_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh7709_devices_setup(void) @@ -52,32 +80,66 @@ static int __init sh7709_devices_setup(void) } __initcall(sh7709_devices_setup); -#define IPRx(A,N) .addr=A, .shift=N -#define IPRA(N) IPRx(0xfffffee2UL,N) -#define IPRB(N) IPRx(0xfffffee4UL,N) -#define IPRC(N) IPRx(0xa4000016UL,N) -#define IPRD(N) IPRx(0xa4000018UL,N) -#define IPRE(N) IPRx(0xa400001aUL,N) - -static struct ipr_data sh7709_ipr_map[] = { - [16] = { IPRA(12), 2 }, /* TMU TUNI0 */ - [17] = { IPRA(8), 4 }, /* TMU TUNI1 */ - [18 ... 19] = { IPRA(4), 1 }, /* TMU TUNI1 */ - [20 ... 22] = { IPRA(0), 2 }, /* RTC CUI */ - [23 ... 26] = { IPRB(4), 3 }, /* SCI */ - [27] = { IPRB(12), 2 }, /* WDT ITI */ - [32] = { IPRC(0), 1 }, /* IRQ 0 */ - [33] = { IPRC(4), 1 }, /* IRQ 1 */ - [34] = { IPRC(8), 1 }, /* IRQ 2 APM */ - [35] = { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */ - [36] = { IPRD(0), 1 }, /* IRQ 4 */ - [37] = { IPRD(4), 1 }, /* IRQ 5 */ - [48 ... 51] = { IPRE(12), 7 }, /* DMA */ - [52 ... 55] = { IPRE(8), 3 }, /* IRDA */ - [56 ... 59] = { IPRE(4), 3 }, /* SCIF */ +static struct ipr_data ipr_irq_table[] = { + { 16, 0, 12, 2 }, /* TMU TUNI0 */ + { 17, 0, 8, 4 }, /* TMU TUNI1 */ + { 18, 0, 4, 1 }, /* TMU TUNI1 */ + { 19, 0, 4, 1 }, /* TMU TUNI1 */ + { 20, 0, 0, 2 }, /* RTC CUI */ + { 21, 0, 0, 2 }, /* RTC CUI */ + { 22, 0, 0, 2 }, /* RTC CUI */ + + { 23, 1, 4, 3 }, /* SCI */ + { 24, 1, 4, 3 }, /* SCI */ + { 25, 1, 4, 3 }, /* SCI */ + { 26, 1, 4, 3 }, /* SCI */ + { 27, 1, 12, 3 }, /* WDT ITI */ + + { 32, 2, 0, 1 }, /* IRQ 0 */ + { 33, 2, 4, 1 }, /* IRQ 1 */ + { 34, 2, 8, 1 }, /* IRQ 2 APM */ + { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */ + + { 36, 3, 0, 1 }, /* IRQ 4 */ + { 37, 3, 4, 1 }, /* IRQ 5 */ + + { 48, 4, 12, 7 }, /* DMA */ + { 49, 4, 12, 7 }, /* DMA */ + { 50, 4, 12, 7 }, /* DMA */ + { 51, 4, 12, 7 }, /* DMA */ + + { 52, 4, 8, 3 }, /* IRDA */ + { 53, 4, 8, 3 }, /* IRDA */ + { 54, 4, 8, 3 }, /* IRDA */ + { 55, 4, 8, 3 }, /* IRDA */ + + { 56, 4, 4, 3 }, /* SCIF */ + { 57, 4, 4, 3 }, /* SCIF */ + { 58, 4, 4, 3 }, /* SCIF */ + { 59, 4, 4, 3 }, /* SCIF */ +}; + +static unsigned long ipr_offsets[] = { + 0xfffffee2, /* 0: IPRA */ + 0xfffffee4, /* 1: IPRB */ + 0xa4000016, /* 2: IPRC */ + 0xa4000018, /* 3: IPRD */ + 0xa400001a, /* 4: IPRE */ +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7709", + }, }; -void __init init_IRQ_ipr() +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 51760a7e7f1c..f40e6dac337d 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -49,7 +49,7 @@ static int __init sh7710_devices_setup(void) } __initcall(sh7710_devices_setup); -static struct ipr_data sh7710_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 8, 2 }, /* TMU1 TUNI */ @@ -78,26 +78,30 @@ static struct ipr_data sh7710_ipr_map[] = { }; static unsigned long ipr_offsets[] = { - 0xA414FEE2 /* 0: IPRA */ -, 0xA414FEE4 /* 1: IPRB */ -, 0xA4140016 /* 2: IPRC */ -, 0xA4140018 /* 3: IPRD */ -, 0xA414001A /* 4: IPRE */ -, 0xA4080000 /* 5: IPRF */ -, 0xA4080002 /* 6: IPRG */ -, 0xA4080004 /* 7: IPRH */ -, 0xA4080006 /* 8: IPRI */ + 0xA414FEE2, /* 0: IPRA */ + 0xA414FEE4, /* 1: IPRB */ + 0xA4140016, /* 2: IPRC */ + 0xA4140018, /* 3: IPRD */ + 0xA414001A, /* 4: IPRE */ + 0xA4080000, /* 5: IPRF */ + 0xA4080002, /* 6: IPRG */ + 0xA4080004, /* 7: IPRH */ + 0xA4080006, /* 8: IPRI */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7710", + }, +}; -void __init init_IRQ_ipr() +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 8add10bd8268..dadd6bffc128 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -10,7 +10,11 @@ obj-$(CONFIG_SH_STORE_QUEUES) += sq.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7750S) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index fab2eb07196b..66c3f75647b2 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void) current_cpu_data.flags |= CPU_HAS_LLSC; } break; + case 0x4000: /* 1st cut */ + case 0x4001: /* 2nd cut */ + current_cpu_data.type = CPU_SHX3; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC; + break; case 0x8000: current_cpu_data.type = CPU_ST40RA; current_cpu_data.flags |= CPU_HAS_FPU; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 03b14cf78ddf..da153bcdfeb2 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -82,7 +82,7 @@ static int __init sh7750_devices_setup(void) } __initcall(sh7750_devices_setup); -static struct ipr_data sh7750_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 12, 2 }, /* TMU1 TUNI */ @@ -106,8 +106,27 @@ static struct ipr_data sh7750_ipr_map[] = { { 38, 2, 8, 7 }, /* DMAC DMAE */ }; +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7750", + }, +}; + #ifdef CONFIG_CPU_SUBTYPE_SH7751 -static struct ipr_data sh7751_ipr_map[] = { +static struct ipr_data ipr_irq_table_sh7751[] = { { 44, 2, 8, 7 }, /* DMAC DMTE4 */ { 45, 2, 8, 7 }, /* DMAC DMTE5 */ { 46, 2, 8, 7 }, /* DMAC DMTE6 */ @@ -118,21 +137,26 @@ static struct ipr_data sh7751_ipr_map[] = { /*{ 72, INTPRI00, 8, ? },*/ /* TMU3 TUNI */ /*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */ }; -#endif -static unsigned long ipr_offsets[] = { - 0xffd00004UL, /* 0: IPRA */ - 0xffd00008UL, /* 1: IPRB */ - 0xffd0000cUL, /* 2: IPRC */ - 0xffd00010UL, /* 3: IPRD */ +static struct ipr_desc ipr_irq_desc_sh7751 = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table_sh7751, + .nr_irqs = ARRAY_SIZE(ipr_irq_table_sh7751), + + .chip = { + .name = "IPR-sh7751", + }, }; +#endif -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) +void __init init_IRQ_ipr(void) { - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; + register_ipr_controller(&ipr_irq_desc); +#ifdef CONFIG_CPU_SUBTYPE_SH7751 + register_ipr_controller(&ipr_irq_desc_sh7751); +#endif } #define INTC_ICR 0xffd00000UL @@ -143,11 +167,3 @@ void ipr_irq_enable_irlm(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); } - -void __init init_IRQ_ipr() -{ - make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map)); -#ifdef CONFIG_CPU_SUBTYPE_SH7751 - make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map)); -#endif -} diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index b7c702821e6f..3df169755673 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -96,7 +96,25 @@ static struct intc2_data intc2_irq_table[] = { {109,12, 0, 4, 0, 3}, /* CMTI */ }; -static struct ipr_data sh7760_ipr_map[] = { +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xfe080000, + .msk_base = 0xfe080040, + .mskclr_base = 0xfe080060, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7760", + }, +}; + +void __init init_IRQ_intc2(void) +{ + register_intc2_controller(&intc2_irq_desc); +} + +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 8, 2 }, /* TMU1 TUNI */ @@ -133,20 +151,19 @@ static unsigned long ipr_offsets[] = { 0xffd00010UL, /* 3: IPRD */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), -void __init init_IRQ_intc2(void) -{ - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); -} + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7760", + }, +}; -void __init init_IRQ_ipr(void) +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index ab7422f8f820..400623286487 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o +obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o @@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o +clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c new file mode 100644 index 000000000000..c630b29e06a8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -0,0 +1,135 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-shx3.c + * + * SH-X3 support for the clock framework + * + * Copyright (C) 2006-2007 Renesas Technology Corp. + * Copyright (C) 2006-2007 Renesas Solutions Corp. + * Copyright (C) 2006-2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 1, 2, 4 ,6 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 }; +static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 }; +static int cfc_divisors[] = { 1, 1, 4, 6 }; + +#define IFC_POS 28 +#define IFC_MSK 0x0003 +#define BFC_MSK 0x000f +#define PFC_MSK 0x000f +#define CFC_MSK 0x0003 +#define BFC_POS 16 +#define PFC_POS 0 +#define CFC_POS 20 + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK]; +} + +static struct clk_ops shx3_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops shx3_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops shx3_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops shx3_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *shx3_clk_ops[] = { + &shx3_master_clk_ops, + &shx3_module_clk_ops, + &shx3_bus_clk_ops, + &shx3_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(shx3_clk_ops)) + *ops = shx3_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK); + clk->rate = clk->parent->rate / cfc_divisors[idx]; +} + +static struct clk_ops shx3_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk shx3_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &shx3_shyway_clk_ops, +}; + +/* + * Additional SHx3-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *shx3_onchip_clocks[] = { + &shx3_shyway_clk, +}; + +static int __init shx3_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) { + struct clk *clkp = shx3_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} +arch_initcall(shx3_clk_init); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 1143fbf65faf..a3e159ef6dfe 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -1,7 +1,7 @@ /* * SH7722 Setup * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,6 +10,8 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/serial.h> +#include <linux/mm.h> +#include <asm/mmzone.h> #include <asm/sci.h> static struct plat_sci_port sci_platform_data[] = { @@ -42,7 +44,7 @@ static int __init sh7722_devices_setup(void) } __initcall(sh7722_devices_setup); -static struct ipr_data sh7722_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, prio */ { 16, 0, 12, 2 }, /* TMU0 */ { 17, 0, 8, 2 }, /* TMU1 */ @@ -67,14 +69,25 @@ static unsigned long ipr_offsets[] = { 0xa408002c, /* 11: IPRL */ }; -unsigned int map_ipridx_to_addr(int idx) +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7722", + }, +}; + +void __init init_IRQ_ipr(void) { - if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) - return 0; - return ipr_offsets[idx]; + register_ipr_controller(&ipr_irq_desc); } -void __init init_IRQ_ipr(void) +void __init plat_mem_setup(void) { - make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map)); + /* Register the URAM space as Node 1 */ + setup_bootmem_node(1, 0x055f0000, 0x05610000); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 9aeaa2ddaa28..b57c760bffde 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -102,7 +102,20 @@ static struct intc2_data intc2_irq_table[] = { { 68, 0x14, 8, 0, 18, 2 }, /* PCIC4 */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xffd40000, + .msk_base = 0xffd40038, + .mskclr_base = 0xffd4003c, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7780", + }, +}; + void __init init_IRQ_intc2(void) { - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); + register_intc2_controller(&intc2_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 07b0de82cfe6..ce10ec5d6914 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -97,7 +97,21 @@ static struct intc2_data intc2_irq_table[] = { { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xffd40000, + .msk_base = 0xffd40038, + .mskclr_base = 0xffd4003c, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7785", + }, +}; + void __init init_IRQ_intc2(void) { - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); + register_intc2_controller(&intc2_irq_desc); } + diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c new file mode 100644 index 000000000000..70683ea12b83 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -0,0 +1,85 @@ +/* + * SH-X3 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffc30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffc40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 45, 47, 46 }, + }, { + .mapbase = 0xffc50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 48, 49, 51, 50 }, + }, { + .mapbase = 0xffc60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *shx3_devices[] __initdata = { + &sci_device, +}; + +static int __init shx3_devices_setup(void) +{ + return platform_add_devices(shx3_devices, + ARRAY_SIZE(shx3_devices)); +} +__initcall(shx3_devices_setup); + +static struct intc2_data intc2_irq_table[] = { + { 16, 0, 0, 0, 1, 2 }, /* TMU0 */ + { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */ + { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */ + { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */ + { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */ +}; + +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xfe410000, + .msk_base = 0xfe410820, + .mskclr_base = 0xfe410850, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-SHX3", + }, +}; + +void __init init_IRQ_intc2(void) +{ + register_intc2_controller(&intc2_irq_desc); +} diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 27b923c45b3d..27897798867a 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -158,15 +158,11 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) } #ifdef CONFIG_4KSTACKS -/* - * These should really be __section__(".bss.page_aligned") as well, but - * gcc's 3.0 and earlier don't handle that correctly. - */ static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__aligned__(THREAD_SIZE))); + __attribute__((__section__(".bss.page_aligned"))); static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__aligned__(THREAD_SIZE))); + __attribute__((__section__(".bss.page_aligned"))); /* * allocate per-cpu stacks for hardirq and for softirq processing diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c new file mode 100644 index 000000000000..23c5948f0124 --- /dev/null +++ b/arch/sh/kernel/machvec.c @@ -0,0 +1,130 @@ +/* + * arch/sh/kernel/machvec.c + * + * The SuperH machine vector setup handlers, yanked from setup.c + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/string.h> +#include <asm/machvec.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/irq.h> + +#define MV_NAME_SIZE 32 + +#define for_each_mv(mv) \ + for ((mv) = (struct sh_machine_vector *)&__machvec_start; \ + (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \ + (mv)++) + +static struct sh_machine_vector * __init get_mv_byname(const char *name) +{ + struct sh_machine_vector *mv; + + for_each_mv(mv) + if (strcasecmp(name, mv->mv_name) == 0) + return mv; + + return NULL; +} + +static unsigned int __initdata machvec_selected; + +static int __init early_parse_mv(char *from) +{ + char mv_name[MV_NAME_SIZE] = ""; + char *mv_end; + char *mv_comma; + int mv_len; + struct sh_machine_vector *mvp; + + mv_end = strchr(from, ' '); + if (mv_end == NULL) + mv_end = from + strlen(from); + + mv_comma = strchr(from, ','); + mv_len = mv_end - from; + if (mv_len > (MV_NAME_SIZE-1)) + mv_len = MV_NAME_SIZE-1; + memcpy(mv_name, from, mv_len); + mv_name[mv_len] = '\0'; + from = mv_end; + + machvec_selected = 1; + + /* Boot with the generic vector */ + if (strcmp(mv_name, "generic") == 0) + return 0; + + mvp = get_mv_byname(mv_name); + if (unlikely(!mvp)) { + printk("Available vectors:\n\n\t'%s', ", sh_mv.mv_name); + for_each_mv(mvp) + printk("'%s', ", mvp->mv_name); + printk("\n\n"); + panic("Failed to select machvec '%s' -- halting.\n", + mv_name); + } else + sh_mv = *mvp; + + return 0; +} +early_param("sh_mv", early_parse_mv); + +void __init sh_mv_setup(void) +{ + /* + * Only overload the machvec if one hasn't been selected on + * the command line with sh_mv= + */ + if (!machvec_selected) { + unsigned long machvec_size; + + machvec_size = ((unsigned long)&__machvec_end - + (unsigned long)&__machvec_start); + + /* + * If the machvec hasn't been preselected, use the first + * vector (usually the only one) from .machvec.init. + */ + if (machvec_size >= sizeof(struct sh_machine_vector)) + sh_mv = *(struct sh_machine_vector *)&__machvec_start; + } + + printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type()); + + /* + * Manually walk the vec, fill in anything that the board hasn't yet + * by hand, wrapping to the generic implementation. + */ +#define mv_set(elem) do { \ + if (!sh_mv.mv_##elem) \ + sh_mv.mv_##elem = generic_##elem; \ +} while (0) + + mv_set(inb); mv_set(inw); mv_set(inl); + mv_set(outb); mv_set(outw); mv_set(outl); + + mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); + mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); + + mv_set(insb); mv_set(insw); mv_set(insl); + mv_set(outsb); mv_set(outsw); mv_set(outsl); + + mv_set(readb); mv_set(readw); mv_set(readl); + mv_set(writeb); mv_set(writew); mv_set(writel); + + mv_set(ioport_map); + mv_set(ioport_unmap); + mv_set(irq_demux); + + if (!sh_mv.mv_nr_irqs) + sh_mv.mv_nr_irqs = NR_IRQS; +} diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index a11e2aa73cbc..6334a4c54c7c 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -17,6 +17,7 @@ #include <linux/kexec.h> #include <linux/kdebug.h> #include <linux/tick.h> +#include <linux/reboot.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> @@ -319,9 +320,7 @@ static void ubc_set_tracing(int asid, unsigned long pc) ctrl_outl(pc, UBC_BARA); #ifdef CONFIG_MMU - /* We don't have any ASID settings for the SH-2! */ - if (current_cpu_data.type != CPU_SH7604) - ctrl_outb(asid, UBC_BASRA); + ctrl_outb(asid, UBC_BASRA); #endif ctrl_outl(0, UBC_BAMRA); @@ -405,8 +404,8 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); #ifdef CONFIG_MMU + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL); #else /* fork almost works, enough to trick you into looking elsewhere :-( */ @@ -449,23 +448,20 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, /* * sys_execve() executes a new program. */ -asmlinkage int sys_execve(char *ufilename, char **uargv, - char **uenvp, unsigned long r7, +asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv, + char __user * __user *uenvp, unsigned long r7, struct pt_regs __regs) { struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int error; char *filename; - filename = getname((char __user *)ufilename); + filename = getname(ufilename); error = PTR_ERR(filename); if (IS_ERR(filename)) goto out; - error = do_execve(filename, - (char __user * __user *)uargv, - (char __user * __user *)uenvp, - regs); + error = do_execve(filename, uargv, uenvp, regs); if (error == 0) { task_lock(current); current->ptrace &= ~PT_DTRACE; diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 3fb5fc0b550d..f2eaa485d04d 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -99,7 +99,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = -EIO; if (copied != sizeof(tmp)) break; - ret = put_user(tmp,(unsigned long *) data); + ret = put_user(tmp,(unsigned long __user *) data); break; } @@ -128,7 +128,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) tmp = !!tsk_used_math(child); else tmp = 0; - ret = put_user(tmp, (unsigned long *)data); + ret = put_user(tmp, (unsigned long __user *)data); break; } @@ -196,7 +196,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_SINGLESTEP: { /* set the trap flag. */ long pc; - struct pt_regs *dummy = NULL; + struct pt_regs *regs = NULL; ret = -EIO; if (!valid_signal(data)) @@ -207,7 +207,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) child->ptrace |= PT_DTRACE; } - pc = get_stack_long(child, (long)&dummy->pc); + pc = get_stack_long(child, (long)®s->pc); /* Next scheduling will set up UBC */ if (child->thread.ubc_pc == 0) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index c27729135935..de8e6e2f2c87 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -23,6 +23,7 @@ #include <linux/kexec.h> #include <asm/uaccess.h> #include <asm/io.h> +#include <asm/page.h> #include <asm/sections.h> #include <asm/irq.h> #include <asm/setup.h> @@ -41,20 +42,19 @@ extern void * __rd_start, * __rd_end; * The bigger value means no problem. */ struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; + +/* + * The machine vector. First entry in .machvec.init, or clobbered by + * sh_mv= on the command line, prior to .machvec.init teardown. + */ +struct sh_machine_vector sh_mv = { .mv_name = "generic", }; + #ifdef CONFIG_VT struct screen_info screen_info; #endif -#if defined(CONFIG_SH_UNKNOWN) -struct sh_machine_vector sh_mv; -#endif - extern int root_mountflags; -#define MV_NAME_SIZE 32 - -static struct sh_machine_vector* __init get_mv_byname(const char* name); - /* * This is set up by the setup-routine at boot-time */ @@ -80,131 +80,17 @@ static struct resource data_resource = { .name = "Kernel data", }; unsigned long memory_start, memory_end; -static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], - struct sh_machine_vector** mvp, - unsigned long *mv_io_base) +static int __init early_parse_mem(char *p) { - char c = ' ', *to = command_line, *from = COMMAND_LINE; - int len = 0; - - /* Save unparsed command line copy for /proc/cmdline */ - memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; + unsigned long size; memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; - memory_end = memory_start + __MEMORY_SIZE; - - for (;;) { - /* - * "mem=XXX[kKmM]" defines a size of memory. - */ - if (c == ' ' && !memcmp(from, "mem=", 4)) { - if (to != command_line) - to--; - { - unsigned long mem_size; - - mem_size = memparse(from+4, &from); - memory_end = memory_start + mem_size; - } - } - - if (c == ' ' && !memcmp(from, "sh_mv=", 6)) { - char* mv_end; - char* mv_comma; - int mv_len; - if (to != command_line) - to--; - from += 6; - mv_end = strchr(from, ' '); - if (mv_end == NULL) - mv_end = from + strlen(from); - - mv_comma = strchr(from, ','); - if ((mv_comma != NULL) && (mv_comma < mv_end)) { - int ints[3]; - get_options(mv_comma+1, ARRAY_SIZE(ints), ints); - *mv_io_base = ints[1]; - mv_len = mv_comma - from; - } else { - mv_len = mv_end - from; - } - if (mv_len > (MV_NAME_SIZE-1)) - mv_len = MV_NAME_SIZE-1; - memcpy(mv_name, from, mv_len); - mv_name[mv_len] = '\0'; - from = mv_end; - - *mvp = get_mv_byname(mv_name); - } - - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - *to = '\0'; - *cmdline_p = command_line; -} - -static int __init sh_mv_setup(char **cmdline_p) -{ -#ifdef CONFIG_SH_UNKNOWN - extern struct sh_machine_vector mv_unknown; -#endif - struct sh_machine_vector *mv = NULL; - char mv_name[MV_NAME_SIZE] = ""; - unsigned long mv_io_base = 0; - - parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base); - -#ifdef CONFIG_SH_UNKNOWN - if (mv == NULL) { - mv = &mv_unknown; - if (*mv_name != '\0') { - printk("Warning: Unsupported machine %s, using unknown\n", - mv_name); - } - } - sh_mv = *mv; -#endif - - /* - * Manually walk the vec, fill in anything that the board hasn't yet - * by hand, wrapping to the generic implementation. - */ -#define mv_set(elem) do { \ - if (!sh_mv.mv_##elem) \ - sh_mv.mv_##elem = generic_##elem; \ -} while (0) - - mv_set(inb); mv_set(inw); mv_set(inl); - mv_set(outb); mv_set(outw); mv_set(outl); - - mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); - mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); - - mv_set(insb); mv_set(insw); mv_set(insl); - mv_set(outsb); mv_set(outsw); mv_set(outsl); - - mv_set(readb); mv_set(readw); mv_set(readl); - mv_set(writeb); mv_set(writew); mv_set(writel); - - mv_set(ioport_map); - mv_set(ioport_unmap); - mv_set(irq_demux); - -#ifdef CONFIG_SH_UNKNOWN - __set_io_port_base(mv_io_base); -#endif - - if (!sh_mv.mv_nr_irqs) - sh_mv.mv_nr_irqs = NR_IRQS; + size = memparse(p, &p); + memory_end = memory_start + size; return 0; } +early_param("mem", early_parse_mem); /* * Register fully available low RAM pages with the bootmem allocator. @@ -230,7 +116,7 @@ static void __init register_bootmem_low_pages(void) free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages)); } -void __init setup_bootmem_allocator(unsigned long start_pfn) +void __init setup_bootmem_allocator(unsigned long free_pfn) { unsigned long bootmap_size; @@ -239,9 +125,10 @@ void __init setup_bootmem_allocator(unsigned long start_pfn) * bootstrap step all allocations (until the page allocator * is intact) must be done via bootmem_alloc(). */ - bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, + bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn, min_low_pfn, max_low_pfn); + add_active_range(0, min_low_pfn, max_low_pfn); register_bootmem_low_pages(); node_set_online(0); @@ -254,7 +141,7 @@ void __init setup_bootmem_allocator(unsigned long start_pfn) * an invalid RAM area. */ reserve_bootmem(__MEMORY_START+PAGE_SIZE, - (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); + (PFN_PHYS(free_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); /* * reserve physical page 0 - it's a special BIOS page on many boxes, @@ -262,6 +149,8 @@ void __init setup_bootmem_allocator(unsigned long start_pfn) */ reserve_bootmem(__MEMORY_START, PAGE_SIZE); + sparse_memory_present_with_active_regions(0); + #ifdef CONFIG_BLK_DEV_INITRD ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); if (&__rd_start != &__rd_end) { @@ -315,10 +204,6 @@ void __init setup_arch(char **cmdline_p) { enable_mmu(); -#ifdef CONFIG_CMDLINE_BOOL - strcpy(COMMAND_LINE, CONFIG_CMDLINE); -#endif - ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); #ifdef CONFIG_BLK_DEV_RAM @@ -339,9 +224,22 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; + memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_end = memory_start + __MEMORY_SIZE; + +#ifdef CONFIG_CMDLINE_BOOL + strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); +#else + strlcpy(command_line, COMMAND_LINE, sizeof(command_line)); +#endif + + /* Save unparsed command line copy for /proc/cmdline */ + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + parse_early_param(); - sh_mv_setup(cmdline_p); + sh_mv_setup(); /* * Find the highest page frame number we have available @@ -355,8 +253,9 @@ void __init setup_arch(char **cmdline_p) min_low_pfn = __MEMORY_START >> PAGE_SHIFT; nodes_clear(node_online_map); + + /* Setup bootmem with available RAM */ setup_memory(); - paging_init(); sparse_init(); #ifdef CONFIG_DUMMY_CONSOLE @@ -366,46 +265,13 @@ void __init setup_arch(char **cmdline_p) /* Perform the machine specific initialisation */ if (likely(sh_mv.mv_setup)) sh_mv.mv_setup(cmdline_p); -} - -struct sh_machine_vector* __init get_mv_byname(const char* name) -{ - extern long __machvec_start, __machvec_end; - struct sh_machine_vector *all_vecs = - (struct sh_machine_vector *)&__machvec_start; - - int i, n = ((unsigned long)&__machvec_end - - (unsigned long)&__machvec_start)/ - sizeof(struct sh_machine_vector); - - for (i = 0; i < n; ++i) { - struct sh_machine_vector *mv = &all_vecs[i]; - if (mv == NULL) - continue; - if (strcasecmp(name, get_system_type()) == 0) { - return mv; - } - } - return NULL; -} - -static struct cpu cpu[NR_CPUS]; - -static int __init topology_init(void) -{ - int cpu_id; - for_each_possible_cpu(cpu_id) - register_cpu(&cpu[cpu_id], cpu_id); - - return 0; + paging_init(); } -subsys_initcall(topology_init); - static const char *cpu_name[] = { [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", - [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300", + [CPU_SH7300] = "SH7300", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", @@ -419,7 +285,7 @@ static const char *cpu_name[] = { [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", - [CPU_SH_NONE] = "Unknown" + [CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown" }; const char *get_cpu_subtype(struct sh_cpuinfo *c) diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index c1cfcb9f047c..c968dcf09eee 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -78,6 +78,16 @@ DECLARE_EXPORT(__movstr); DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); DECLARE_EXPORT(__movmemSI12_i4); + +#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__)) +/* + * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST + * compiler which include backported patches. + */ +DECLARE_EXPORT(__sdivsi3_i4i); +DECLARE_EXPORT(__udiv_qrnnd_16); +DECLARE_EXPORT(__udivsi3_i4i); +#endif #else /* GCC 3.x */ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index e323e299878b..706d81ccd101 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -23,6 +23,7 @@ #include <linux/personality.h> #include <linux/binfmts.h> #include <linux/freezer.h> +#include <linux/io.h> #include <asm/system.h> #include <asm/ucontext.h> #include <asm/uaccess.h> @@ -261,7 +262,7 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs->regs[15]); + do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame); return r0; diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index 7db1c2dc5992..ff5656e60c05 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -308,9 +308,9 @@ ENTRY(sys_call_table) .long sys_utimes .long sys_fadvise64_64_wrapper .long sys_ni_syscall /* Reserved for vserver */ - .long sys_ni_syscall /* Reserved for mbind */ - .long sys_ni_syscall /* 275 - get_mempolicy */ - .long sys_ni_syscall /* set_mempolicy */ + .long sys_mbind + .long sys_get_mempolicy /* 275 */ + .long sys_set_mempolicy .long sys_mq_open .long sys_mq_unlink .long sys_mq_timedsend diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 2d997e2a5b6c..097ebd49f1bf 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -30,7 +30,7 @@ static int tmu_timer_start(void) { - ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR); + ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR); return 0; } @@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload) static int tmu_timer_stop(void) { - ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR); + ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR); return 0; } @@ -174,7 +174,8 @@ static int tmu_timer_init(void) #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7785) + !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ + !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c new file mode 100644 index 000000000000..9b5844a1bdaa --- /dev/null +++ b/arch/sh/kernel/topology.c @@ -0,0 +1,49 @@ +/* + * arch/sh/kernel/topology.c + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int i, ret; + +#ifdef CONFIG_NEED_MULTIPLE_NODES + for_each_online_node(i) + register_one_node(i); +#endif + + for_each_present_cpu(i) { + ret = register_cpu(&per_cpu(cpu_devices, i), i); + if (unlikely(ret)) + printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n", + __FUNCTION__, i, ret); + } + +#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP) + /* + * In the UP case, make sure the CPU association is still + * registered under each node. Without this, sysfs fails + * to make the connection between nodes other than node0 + * and cpu0. + */ + for_each_online_node(i) + if (i != numa_node_id()) + register_cpu_under_node(raw_smp_processor_id(), i); +#endif + + return 0; +} +subsys_initcall(topology_init); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 8f18930d5bf8..05a40f3c30bf 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -584,7 +584,7 @@ uspace_segv: info.si_signo = SIGBUS; info.si_errno = 0; info.si_code = si_code; - info.si_addr = (void *) address; + info.si_addr = (void __user *)address; force_sig_info(SIGBUS, &info, current); } else { if (regs->pc & 1) @@ -617,7 +617,7 @@ uspace_segv: */ int is_dsp_inst(struct pt_regs *regs) { - unsigned short inst; + unsigned short inst = 0; /* * Safe guard if DSP mode is already enabled or we're lacking @@ -645,7 +645,6 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); siginfo_t info; switch (r4) { @@ -874,7 +873,7 @@ void __init trap_init(void) void handle_BUG(struct pt_regs *regs) { enum bug_trap_type tt; - tt = report_bug(regs->pc); + tt = report_bug(regs->pc, regs); if (tt == BUG_TRAP_TYPE_WARN) { regs->pc += 2; return; diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 4c5b57e9c3c1..0696402f446a 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -97,18 +97,20 @@ SECTIONS __initramfs_end = .; #endif + . = ALIGN(4); __machvec_start = .; - .init.machvec : { *(.init.machvec) } + .machvec.init : { *(.machvec.init) } __machvec_end = .; - . = ALIGN(PAGE_SIZE); - __init_end = .; - - . = ALIGN(4); - __bss_start = .; /* BSS */ - .bss : { *(.bss) } - . = ALIGN(4); - _end = . ; + . = ALIGN(PAGE_SIZE); + .bss : { + __init_end = .; + __bss_start = .; /* BSS */ + *(.bss.page_aligned) + *(.bss) + . = ALIGN(4); + _end = . ; + } /* When something in the kernel is NOT compiled as a module, the * module cleanup code and data are put into these segments. Both diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c index c02473afd581..4bef3b5d964a 100644 --- a/arch/sh/lib/div64-generic.c +++ b/arch/sh/lib/div64-generic.c @@ -4,16 +4,15 @@ #include <linux/types.h> -extern u64 __xdiv64_32(u64 n, u32 d); +extern uint64_t __xdiv64_32(u64 n, u32 d); -u64 __div64_32(u64 *xp, u32 y) +uint32_t __div64_32(u64 *xp, u32 y) { - u64 rem; - u64 q = __xdiv64_32(*xp, y); + uint32_t rem; + uint64_t q = __xdiv64_32(*xp, y); rem = *xp - q * y; *xp = q; return rem; } - diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S index eefc275d64a7..5ee7334ea64f 100644 --- a/arch/sh/lib/div64.S +++ b/arch/sh/lib/div64.S @@ -1,12 +1,12 @@ /* - * unsigned long long __xdiv64_32(unsigned long long n, unsigned long d); + * unsigned long __xdiv64_32(unsigned long long n, unsigned long d); */ #include <linux/linkage.h> .text ENTRY(__xdiv64_32) -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN mov r4, r0 mov r5, r1 #else @@ -34,7 +34,7 @@ ENTRY(__xdiv64_32) rotcl r0 div1 r6, r1 .endr -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN mov r2, r1 rts rotcl r0 diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c index a38e1eed9e77..ac2d7abd2567 100644 --- a/arch/sh/math-emu/math.c +++ b/arch/sh/math-emu/math.c @@ -507,6 +507,7 @@ static int ieee_fpe_handler(struct pt_regs *regs) unsigned short insn = *(unsigned short *)regs->pc; unsigned short finsn; unsigned long nextpc; + siginfo_t info; int nib[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, @@ -559,9 +560,11 @@ static int ieee_fpe_handler(struct pt_regs *regs) ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); set_tsk_thread_flag(tsk, TIF_USEDFPU); } else { - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; - force_sig(SIGFPE, tsk); + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = FPE_FLTINV; + info.si_addr = (void __user *)regs->pc; + force_sig_info(SIGFPE, &info, tsk); } regs->pc = nextpc; @@ -576,14 +579,17 @@ asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5, struct pt_regs regs) { struct task_struct *tsk = current; + siginfo_t info; if (ieee_fpe_handler (®s)) return; regs.pc += 2; - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; - force_sig(SIGFPE, tsk); + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = FPE_FLTINV; + info.si_addr = (void __user *)regs.pc; + force_sig_info(SIGFPE, &info, tsk); } /** diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 253346d7b316..28d79a474cde 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -1,5 +1,3 @@ -menu "Processor selection" - # # Processor families # @@ -38,27 +36,31 @@ config CPU_SUBTYPE_ST40 config CPU_SHX2 bool +config CPU_SHX3 + bool + +choice + prompt "Processor sub-type selection" + # # Processor subtypes # -comment "SH-2 Processor Support" - -config CPU_SUBTYPE_SH7604 - bool "Support SH7604 processor" - select CPU_SH2 +# SH-2 Processor Support config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 + select CPU_HAS_IPR_IRQ -comment "SH-2A Processor Support" +# SH-2A Processor Support config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A + select CPU_HAS_IPR_IRQ -comment "SH-3 Processor Support" +# SH-3 Processor Support config CPU_SUBTYPE_SH7300 bool "Support SH7300 processor" @@ -113,7 +115,7 @@ config CPU_SUBTYPE_SH7712 help Select SH7712 if you have a SH3-DSP SH7712 CPU. -comment "SH-4 Processor Support" +# SH-4 Processor Support config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" @@ -125,7 +127,7 @@ config CPU_SUBTYPE_SH7750 config CPU_SUBTYPE_SH7091 bool "Support SH7091 processor" select CPU_SH4 - select CPU_SUBTYPE_SH7750 + select CPU_HAS_IPR_IRQ help Select SH7091 if you have an SH-4 based Sega device (such as the Dreamcast, Naomi, and Naomi 2). @@ -133,13 +135,11 @@ config CPU_SUBTYPE_SH7091 config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 - select CPU_SUBTYPE_SH7750 select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 - select CPU_SUBTYPE_SH7750 select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7751 @@ -153,7 +153,6 @@ config CPU_SUBTYPE_SH7751 config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 - select CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7760 @@ -166,7 +165,7 @@ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" select CPU_SH4 -comment "ST40 Processor Support" +# ST40 Processor Support config CPU_SUBTYPE_ST40STB1 bool "Support ST40STB1/ST40RA processors" @@ -181,7 +180,7 @@ config CPU_SUBTYPE_ST40GX1 help Select ST40GX1 if you have a ST40GX1 CPU. -comment "SH-4A Processor Support" +# SH-4A Processor Support config CPU_SUBTYPE_SH7770 bool "Support SH7770 processor" @@ -198,7 +197,13 @@ config CPU_SUBTYPE_SH7785 select CPU_SHX2 select CPU_HAS_INTC2_IRQ -comment "SH4AL-DSP Processor Support" +config CPU_SUBTYPE_SHX3 + bool "Support SH-X3 processor" + select CPU_SH4A + select CPU_SHX3 + select CPU_HAS_INTC2_IRQ + +# SH4AL-DSP Processor Support config CPU_SUBTYPE_SH73180 bool "Support SH73180 processor" @@ -213,8 +218,10 @@ config CPU_SUBTYPE_SH7722 select CPU_SH4AL_DSP select CPU_SHX2 select CPU_HAS_IPR_IRQ + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA -endmenu +endchoice menu "Memory management options" @@ -266,7 +273,7 @@ config MEMORY_SIZE config 32BIT bool "Support 32-bit physical addressing through PMB" - depends on CPU_SH4A && MMU && (!X2TLB || BROKEN) + depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) default y help If you say Y here, physical addressing will be extended to @@ -295,6 +302,17 @@ config VSYSCALL For systems with an MMU that can afford to give up a page, (the default value) say Y. +config NUMA + bool "Non Uniform Memory Access (NUMA) Support" + depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL + default n + help + Some SH systems have many various memories scattered around + the address space, each with varying latencies. This enables + support for these blocks by binding them to nodes and allowing + memory policies to be used for prioritizing and controlling + allocation behaviour. + config NODES_SHIFT int default "1" @@ -302,14 +320,34 @@ config NODES_SHIFT config ARCH_FLATMEM_ENABLE def_bool y + depends on !NUMA + +config ARCH_SPARSEMEM_ENABLE + def_bool y + select SPARSEMEM_STATIC + +config ARCH_SPARSEMEM_DEFAULT + def_bool y config MAX_ACTIVE_REGIONS int + default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM) default "1" config ARCH_POPULATES_NODE_MAP def_bool y +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y + depends on SPARSEMEM + +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + choice prompt "Kernel page size" default PAGE_SIZE_4KB @@ -394,15 +432,4 @@ config SH_WRITETHROUGH If unsure, say N. -config SH_OCRAM - bool "Operand Cache RAM (OCRAM) support" - help - Selecting this option will automatically tear down the number of - sets in the dcache by half, which in turn exposes a memory range. - - The addresses for the OC RAM base will vary according to the - processor version. Consult vendor documentation for specifics. - - If unsure, say N. - endmenu diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 3ffd7f68c0a2..d677d7f3afc1 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -8,9 +8,6 @@ obj-$(CONFIG_CPU_SH2) += cache-sh2.o obj-$(CONFIG_CPU_SH3) += cache-sh3.o obj-$(CONFIG_CPU_SH4) += cache-sh4.o -obj-$(CONFIG_DMA_PAGE_OPS) += pg-dma.o -obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o - mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \ ioremap.o @@ -27,5 +24,7 @@ obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o endif +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o obj-$(CONFIG_32BIT) += pmb.o +obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index c878faa4ae46..0b3eaf6fbb28 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -32,7 +32,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct * vma; - unsigned long page; int si_code; siginfo_t info; @@ -170,24 +169,38 @@ no_context: * terminate things with extreme prejudice. * */ - if (address < PAGE_SIZE) - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); - else - printk(KERN_ALERT "Unable to handle kernel paging request"); - printk(" at virtual address %08lx\n", address); - printk(KERN_ALERT "pc = %08lx\n", regs->pc); - page = (unsigned long)get_TTB(); - if (page) { - page = ((unsigned long *) page)[address >> PGDIR_SHIFT]; - printk(KERN_ALERT "*pde = %08lx\n", page); - if (page & _PAGE_PRESENT) { - page &= PAGE_MASK; - address &= 0x003ff000; - page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; - printk(KERN_ALERT "*pte = %08lx\n", page); + + bust_spinlocks(1); + + if (oops_may_print()) { + __typeof__(pte_val(__pte(0))) page; + + if (address < PAGE_SIZE) + printk(KERN_ALERT "Unable to handle kernel NULL " + "pointer dereference"); + else + printk(KERN_ALERT "Unable to handle kernel paging " + "request"); + printk(" at virtual address %08lx\n", address); + printk(KERN_ALERT "pc = %08lx\n", regs->pc); + page = (unsigned long)get_TTB(); + if (page) { + page = ((__typeof__(page) *) __va(page))[address >> + PGDIR_SHIFT]; + printk(KERN_ALERT "*pde = %08lx\n", page); + if (page & _PAGE_PRESENT) { + page &= PAGE_MASK; + address &= 0x003ff000; + page = ((__typeof__(page) *) + __va(page))[address >> + PAGE_SHIFT]; + printk(KERN_ALERT "*pte = %08lx\n", page); + } } } + die("Oops", regs, writeaccess); + bust_spinlocks(0); do_exit(SIGKILL); /* diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index e0e644ff3204..82b68c789a5f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -18,6 +18,7 @@ #include <asm/mmu_context.h> #include <asm/tlb.h> #include <asm/cacheflush.h> +#include <asm/sections.h> #include <asm/cache.h> DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -36,14 +37,11 @@ void show_mem(void) show_free_areas(); for_each_online_pgdat(pgdat) { - struct page *page, *end; - unsigned long flags; + unsigned long flags, i; pgdat_resize_lock(pgdat, &flags); - page = pgdat->node_mem_map; - end = page + pgdat->node_spanned_pages; - - do { + for (i = 0; i < pgdat->node_spanned_pages; i++) { + struct page *page = pgdat_page_nr(pgdat, i); total++; if (PageReserved(page)) reserved++; @@ -55,9 +53,7 @@ void show_mem(void) free++; else shared += page_count(page) - 1; - page++; - } while (page < end); - + } pgdat_resize_unlock(pgdat, &flags); } @@ -137,16 +133,12 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) } #endif /* CONFIG_MMU */ -/* References to section boundaries */ - -extern char _text, _etext, _edata, __bss_start, _end; -extern char __init_begin, __init_end; - /* * paging_init() sets up the page tables */ void __init paging_init(void) { + unsigned long max_zone_pfns[MAX_NR_ZONES]; int nid; /* We don't need to map the kernel through the TLB, as @@ -158,43 +150,39 @@ void __init paging_init(void) * check for a null value. */ set_TTB(swapper_pg_dir); + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); - unsigned long max_zone_pfns[MAX_NR_ZONES]; unsigned long low, start_pfn; - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT; low = pgdat->bdata->node_low_pfn; - max_zone_pfns[ZONE_NORMAL] = low; - add_active_range(nid, start_pfn, low); + if (max_zone_pfns[ZONE_NORMAL] < low) + max_zone_pfns[ZONE_NORMAL] = low; printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n", nid, start_pfn, low); - - free_area_init_nodes(max_zone_pfns); - - printk("Node %u: mem_map starts at %p\n", - pgdat->node_id, pgdat->node_mem_map); } + + free_area_init_nodes(max_zone_pfns); } static struct kcore_list kcore_mem, kcore_vmalloc; void __init mem_init(void) { - int codesize, reservedpages, datasize, initsize; + int codesize, datasize, initsize; int nid; - reservedpages = 0; + num_physpages = 0; + high_memory = NULL; for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); unsigned long node_pages = 0; void *node_high_memory; - int i; num_physpages += pgdat->node_present_pages; @@ -203,13 +191,9 @@ void __init mem_init(void) totalram_pages += node_pages; - for (i = 0; i < node_pages; i++) - if (PageReserved(pgdat->node_mem_map + i)) - reservedpages++; - - node_high_memory = (void *)((pgdat->node_start_pfn + - pgdat->node_spanned_pages) << - PAGE_SHIFT); + node_high_memory = (void *)__va((pgdat->node_start_pfn + + pgdat->node_spanned_pages) << + PAGE_SHIFT); if (node_high_memory > high_memory) high_memory = node_high_memory; } @@ -239,11 +223,10 @@ void __init mem_init(void) VMALLOC_END - VMALLOC_START); printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, " - "%dk reserved, %dk data, %dk init)\n", + "%dk data, %dk init)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), - totalram_pages << (PAGE_SHIFT-10), + num_physpages << (PAGE_SHIFT-10), codesize >> 10, - reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10); @@ -264,7 +247,9 @@ void free_initmem(void) free_page(addr); totalram_pages++; } - printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10); + printk("Freeing unused kernel memory: %ldk freed\n", + ((unsigned long)&__init_end - + (unsigned long)&__init_begin) >> 10); } #ifdef CONFIG_BLK_DEV_INITRD @@ -277,6 +262,50 @@ void free_initrd_mem(unsigned long start, unsigned long end) free_page(p); totalram_pages++; } - printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); + printk("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); +} +#endif + +#ifdef CONFIG_MEMORY_HOTPLUG +void online_page(struct page *page) +{ + ClearPageReserved(page); + init_page_count(page); + __free_page(page); + totalram_pages++; + num_physpages++; } + +int arch_add_memory(int nid, u64 start, u64 size) +{ + pg_data_t *pgdat; + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long nr_pages = size >> PAGE_SHIFT; + int ret; + + pgdat = NODE_DATA(nid); + + /* We only have ZONE_NORMAL, so this is easy.. */ + ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages); + if (unlikely(ret)) + printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(arch_add_memory); + +int remove_memory(u64 start, u64 size) +{ + return -EINVAL; +} +EXPORT_SYMBOL_GPL(remove_memory); + +#ifdef CONFIG_NUMA +int memory_add_physaddr_to_nid(u64 addr) +{ + /* Node 0 for now.. */ + return 0; +} +EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); +#endif #endif diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c new file mode 100644 index 000000000000..8aff065dd307 --- /dev/null +++ b/arch/sh/mm/numa.c @@ -0,0 +1,92 @@ +/* + * arch/sh/mm/numa.c - Multiple node support for SH machines + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/module.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/numa.h> +#include <linux/pfn.h> +#include <asm/sections.h> + +static bootmem_data_t plat_node_bdata[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; +EXPORT_SYMBOL_GPL(node_data); + +/* + * On SH machines the conventional approach is to stash system RAM + * in node 0, and other memory blocks in to node 1 and up, ordered by + * latency. Each node's pgdat is node-local at the beginning of the node, + * immediately followed by the node mem map. + */ +void __init setup_memory(void) +{ + unsigned long free_pfn = PFN_UP(__pa(_end)); + + /* + * Node 0 sets up its pgdat at the first available pfn, + * and bumps it up before setting up the bootmem allocator. + */ + NODE_DATA(0) = pfn_to_kaddr(free_pfn); + memset(NODE_DATA(0), 0, sizeof(struct pglist_data)); + free_pfn += PFN_UP(sizeof(struct pglist_data)); + NODE_DATA(0)->bdata = &plat_node_bdata[0]; + + /* Set up node 0 */ + setup_bootmem_allocator(free_pfn); + + /* Give the platforms a chance to hook up their nodes */ + plat_mem_setup(); +} + +void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) +{ + unsigned long bootmap_pages, bootmap_start, bootmap_size; + unsigned long start_pfn, free_pfn, end_pfn; + + /* Don't allow bogus node assignment */ + BUG_ON(nid > MAX_NUMNODES || nid == 0); + + /* + * The free pfn starts at the beginning of the range, and is + * advanced as necessary for pgdat and node map allocations. + */ + free_pfn = start_pfn = start >> PAGE_SHIFT; + end_pfn = end >> PAGE_SHIFT; + + add_active_range(nid, start_pfn, end_pfn); + + /* Node-local pgdat */ + NODE_DATA(nid) = pfn_to_kaddr(free_pfn); + free_pfn += PFN_UP(sizeof(struct pglist_data)); + memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); + + NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; + NODE_DATA(nid)->node_start_pfn = start_pfn; + NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; + + /* Node-local bootmap */ + bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn); + bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn, + end_pfn); + + free_bootmem_with_active_regions(nid, end_pfn); + + /* Reserve the pgdat and bootmap space with the bootmem allocator */ + reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT, + sizeof(struct pglist_data)); + reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT, + bootmap_pages << PAGE_SHIFT); + + /* It's up */ + node_set_online(nid); + + /* Kick sparsemem */ + sparse_memory_present_with_active_regions(nid); +} diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c deleted file mode 100644 index bb23679369d6..000000000000 --- a/arch/sh/mm/pg-dma.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * arch/sh/mm/pg-dma.c - * - * Fast clear_page()/copy_page() implementation using the SH DMAC - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/semaphore.h> -#include <asm/mmu_context.h> -#include <asm/addrspace.h> -#include <asm/atomic.h> -#include <asm/page.h> -#include <asm/dma.h> -#include <asm/io.h> - -/* Channel to use for page ops, must be dual-address mode capable. */ -static int dma_channel = CONFIG_DMA_PAGE_OPS_CHANNEL; - -static void copy_page_dma(void *to, void *from) -{ - /* - * This doesn't seem to get triggered until further along in the - * boot process, at which point the DMAC is already initialized. - * Fix this in the same fashion as clear_page_dma() in the event - * that this crashes due to the DMAC not being initialized. - */ - - flush_icache_range((unsigned long)from, PAGE_SIZE); - dma_write_page(dma_channel, (unsigned long)from, (unsigned long)to); - dma_wait_for_completion(dma_channel); -} - -static void clear_page_dma(void *to) -{ - /* - * We get invoked quite early on, if the DMAC hasn't been initialized - * yet, fall back on the slow manual implementation. - */ - if (dma_info[dma_channel].chan != dma_channel) { - clear_page_slow(to); - return; - } - - dma_write_page(dma_channel, (unsigned long)empty_zero_page, - (unsigned long)to); - - /* - * FIXME: Something is a bit racy here, if we poll the counter right - * away, we seem to lock. flushing the page from the dcache doesn't - * seem to make a difference one way or the other, though either a full - * icache or dcache flush does. - * - * The location of this is important as well, and must happen prior to - * the completion loop but after the transfer was initiated. - * - * Oddly enough, this doesn't appear to be an issue for copy_page().. - */ - flush_icache_range((unsigned long)to, PAGE_SIZE); - - dma_wait_for_completion(dma_channel); -} - -static int __init pg_dma_init(void) -{ - int ret; - - ret = request_dma(dma_channel, "page ops"); - if (ret != 0) - return ret; - - copy_page = copy_page_dma; - clear_page = clear_page_dma; - - return ret; -} - -static void __exit pg_dma_exit(void) -{ - free_dma(dma_channel); -} - -module_init(pg_dma_init); -module_exit(pg_dma_exit); - -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); -MODULE_DESCRIPTION("Optimized page copy/clear routines using a dual-address mode capable DMAC channel"); -MODULE_LICENSE("GPL"); - diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 3c370a113291..567516b58acc 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -12,4 +12,5 @@ include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' + $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index fb40f188aff9..4b5e9305092e 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -18,7 +18,6 @@ SE SH_SOLUTION_ENGINE HP6XX SH_HP6XX HD64461 HD64461 HD64465 HD64465 -SATURN SH_SATURN DREAMCAST SH_DREAMCAST MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 @@ -34,3 +33,4 @@ R7785RP SH_R7785RP TITAN SH_TITAN SHMIN SH_SHMIN 7710VOIPGW SH_7710VOIPGW +LBOXRE2 SH_LBOX_RE2 diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index fbcc00c6c06e..8567cc901942 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -210,6 +210,9 @@ config PCI CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC. All of these platforms are extremely obscure, so say N if unsure. +config PCI_SYSCALL + def_bool PCI + source "drivers/pci/Kconfig" endif diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index e5eaa8072ae0..ca26232da7ab 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -160,9 +160,6 @@ static inline int srmmu_pte_none(pte_t pte) static inline int srmmu_pte_present(pte_t pte) { return ((pte_val(pte) & SRMMU_ET_MASK) == SRMMU_ET_PTE); } -static inline int srmmu_pte_read(pte_t pte) -{ return !(pte_val(pte) & SRMMU_NOREAD); } - static inline void srmmu_pte_clear(pte_t *ptep) { srmmu_set_pte(ptep, __pte(0)); } @@ -2181,7 +2178,6 @@ void __init ld_mmu_srmmu(void) BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0); - BTFIXUPSET_CALL(pte_read, srmmu_pte_read, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pmd_bad, srmmu_pmd_bad, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pmd_present, srmmu_pmd_present, BTFIXUPCALL_NORM); diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c index 436021ceb2e7..bdd835fba02e 100644 --- a/arch/sparc/mm/sun4c.c +++ b/arch/sparc/mm/sun4c.c @@ -1748,11 +1748,6 @@ static int sun4c_pte_present(pte_t pte) } static void sun4c_pte_clear(pte_t *ptep) { *ptep = __pte(0); } -static int sun4c_pte_read(pte_t pte) -{ - return (pte_val(pte) & _SUN4C_PAGE_READ); -} - static int sun4c_pmd_bad(pmd_t pmd) { return (((pmd_val(pmd) & ~PAGE_MASK) != PGD_TABLE) || @@ -2212,7 +2207,6 @@ void __init ld_mmu_sun4c(void) BTFIXUPSET_CALL(pte_present, sun4c_pte_present, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pte_clear, sun4c_pte_clear, BTFIXUPCALL_STG0O0); - BTFIXUPSET_CALL(pte_read, sun4c_pte_read, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pmd_bad, sun4c_pmd_bad, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pmd_present, sun4c_pmd_present, BTFIXUPCALL_NORM); diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 89a1b469b93d..b84b6af1241e 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -108,6 +108,15 @@ config SECCOMP source kernel/Kconfig.hz +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP + select HOTPLUG + ---help--- + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu/cpu#. + Say N if you want to disable CPU hotplug. + source "init/Kconfig" config SYSVIPC_COMPAT @@ -305,6 +314,12 @@ config SUN_IO bool default y +config SUN_LDOMS + bool "Sun Logical Domains support" + help + Say Y here is you want to support virtual devices via + Logical Domains. + config PCI bool "PCI support" select ARCH_SUPPORTS_MSI @@ -320,8 +335,10 @@ config PCI doesn't. config PCI_DOMAINS - bool - default PCI + def_bool PCI + +config PCI_SYSCALL + def_bool PCI source "drivers/pci/Kconfig" diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index f964bf28d21a..b66876bf410c 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \ pci_psycho.o pci_sabre.o pci_schizo.o \ pci_sun4v.o pci_sun4v_asm.o pci_fire.o -obj-$(CONFIG_SMP) += smp.o trampoline.o +obj-$(CONFIG_SMP) += smp.o trampoline.o hvtramp.o obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o obj-$(CONFIG_BINFMT_AOUT32) += binfmt_aout32.o @@ -26,6 +26,7 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o obj-$(CONFIG_AUDIT) += audit.o obj-$(CONFIG_AUDIT)$(CONFIG_SPARC32_COMPAT) += compat_audit.o obj-y += $(obj-yy) diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c new file mode 100644 index 000000000000..ba01533f4e03 --- /dev/null +++ b/arch/sparc64/kernel/ds.c @@ -0,0 +1,1168 @@ +/* ds.c: Domain Services driver for Logical Domains + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/kthread.h> +#include <linux/cpu.h> + +#include <asm/ldc.h> +#include <asm/vio.h> +#include <asm/power.h> +#include <asm/mdesc.h> +#include <asm/head.h> +#include <asm/irq.h> + +#define DRV_MODULE_NAME "ds" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Jul 11, 2007" + +static char version[] __devinitdata = + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; +MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); +MODULE_DESCRIPTION("Sun LDOM domain services driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +struct ds_msg_tag { + __u32 type; +#define DS_INIT_REQ 0x00 +#define DS_INIT_ACK 0x01 +#define DS_INIT_NACK 0x02 +#define DS_REG_REQ 0x03 +#define DS_REG_ACK 0x04 +#define DS_REG_NACK 0x05 +#define DS_UNREG_REQ 0x06 +#define DS_UNREG_ACK 0x07 +#define DS_UNREG_NACK 0x08 +#define DS_DATA 0x09 +#define DS_NACK 0x0a + + __u32 len; +}; + +/* Result codes */ +#define DS_OK 0x00 +#define DS_REG_VER_NACK 0x01 +#define DS_REG_DUP 0x02 +#define DS_INV_HDL 0x03 +#define DS_TYPE_UNKNOWN 0x04 + +struct ds_version { + __u16 major; + __u16 minor; +}; + +struct ds_ver_req { + struct ds_msg_tag tag; + struct ds_version ver; +}; + +struct ds_ver_ack { + struct ds_msg_tag tag; + __u16 minor; +}; + +struct ds_ver_nack { + struct ds_msg_tag tag; + __u16 major; +}; + +struct ds_reg_req { + struct ds_msg_tag tag; + __u64 handle; + __u16 major; + __u16 minor; + char svc_id[0]; +}; + +struct ds_reg_ack { + struct ds_msg_tag tag; + __u64 handle; + __u16 minor; +}; + +struct ds_reg_nack { + struct ds_msg_tag tag; + __u64 handle; + __u16 major; +}; + +struct ds_unreg_req { + struct ds_msg_tag tag; + __u64 handle; +}; + +struct ds_unreg_ack { + struct ds_msg_tag tag; + __u64 handle; +}; + +struct ds_unreg_nack { + struct ds_msg_tag tag; + __u64 handle; +}; + +struct ds_data { + struct ds_msg_tag tag; + __u64 handle; +}; + +struct ds_data_nack { + struct ds_msg_tag tag; + __u64 handle; + __u64 result; +}; + +struct ds_cap_state { + __u64 handle; + + void (*data)(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len); + + const char *service_id; + + u8 state; +#define CAP_STATE_UNKNOWN 0x00 +#define CAP_STATE_REG_SENT 0x01 +#define CAP_STATE_REGISTERED 0x02 +}; + +static void md_update_data(struct ldc_channel *lp, struct ds_cap_state *cp, + void *buf, int len); +static void domain_shutdown_data(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len); +static void domain_panic_data(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len); +#ifdef CONFIG_HOTPLUG_CPU +static void dr_cpu_data(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len); +#endif +static void ds_pri_data(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len); +static void ds_var_data(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len); + +struct ds_cap_state ds_states[] = { + { + .service_id = "md-update", + .data = md_update_data, + }, + { + .service_id = "domain-shutdown", + .data = domain_shutdown_data, + }, + { + .service_id = "domain-panic", + .data = domain_panic_data, + }, +#ifdef CONFIG_HOTPLUG_CPU + { + .service_id = "dr-cpu", + .data = dr_cpu_data, + }, +#endif + { + .service_id = "pri", + .data = ds_pri_data, + }, + { + .service_id = "var-config", + .data = ds_var_data, + }, + { + .service_id = "var-config-backup", + .data = ds_var_data, + }, +}; + +static DEFINE_SPINLOCK(ds_lock); + +struct ds_info { + struct ldc_channel *lp; + u8 hs_state; +#define DS_HS_START 0x01 +#define DS_HS_DONE 0x02 + + void *rcv_buf; + int rcv_buf_len; +}; + +static struct ds_info *ds_info; + +static struct ds_cap_state *find_cap(u64 handle) +{ + unsigned int index = handle >> 32; + + if (index >= ARRAY_SIZE(ds_states)) + return NULL; + return &ds_states[index]; +} + +static struct ds_cap_state *find_cap_by_string(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ds_states); i++) { + if (strcmp(ds_states[i].service_id, name)) + continue; + + return &ds_states[i]; + } + return NULL; +} + +static int __ds_send(struct ldc_channel *lp, void *data, int len) +{ + int err, limit = 1000; + + err = -EINVAL; + while (limit-- > 0) { + err = ldc_write(lp, data, len); + if (!err || (err != -EAGAIN)) + break; + udelay(1); + } + + return err; +} + +static int ds_send(struct ldc_channel *lp, void *data, int len) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&ds_lock, flags); + err = __ds_send(lp, data, len); + spin_unlock_irqrestore(&ds_lock, flags); + + return err; +} + +struct ds_md_update_req { + __u64 req_num; +}; + +struct ds_md_update_res { + __u64 req_num; + __u32 result; +}; + +static void md_update_data(struct ldc_channel *lp, + struct ds_cap_state *dp, + void *buf, int len) +{ + struct ds_data *dpkt = buf; + struct ds_md_update_req *rp; + struct { + struct ds_data data; + struct ds_md_update_res res; + } pkt; + + rp = (struct ds_md_update_req *) (dpkt + 1); + + printk(KERN_INFO PFX "Machine description update.\n"); + + mdesc_update(); + + memset(&pkt, 0, sizeof(pkt)); + pkt.data.tag.type = DS_DATA; + pkt.data.tag.len = sizeof(pkt) - sizeof(struct ds_msg_tag); + pkt.data.handle = dp->handle; + pkt.res.req_num = rp->req_num; + pkt.res.result = DS_OK; + + ds_send(lp, &pkt, sizeof(pkt)); +} + +struct ds_shutdown_req { + __u64 req_num; + __u32 ms_delay; +}; + +struct ds_shutdown_res { + __u64 req_num; + __u32 result; + char reason[1]; +}; + +static void domain_shutdown_data(struct ldc_channel *lp, + struct ds_cap_state *dp, + void *buf, int len) +{ + struct ds_data *dpkt = buf; + struct ds_shutdown_req *rp; + struct { + struct ds_data data; + struct ds_shutdown_res res; + } pkt; + + rp = (struct ds_shutdown_req *) (dpkt + 1); + + printk(KERN_ALERT PFX "Shutdown request from " + "LDOM manager received.\n"); + + memset(&pkt, 0, sizeof(pkt)); + pkt.data.tag.type = DS_DATA; + pkt.data.tag.len = sizeof(pkt) - sizeof(struct ds_msg_tag); + pkt.data.handle = dp->handle; + pkt.res.req_num = rp->req_num; + pkt.res.result = DS_OK; + pkt.res.reason[0] = 0; + + ds_send(lp, &pkt, sizeof(pkt)); + + wake_up_powerd(); +} + +struct ds_panic_req { + __u64 req_num; +}; + +struct ds_panic_res { + __u64 req_num; + __u32 result; + char reason[1]; +}; + +static void domain_panic_data(struct ldc_channel *lp, + struct ds_cap_state *dp, + void *buf, int len) +{ + struct ds_data *dpkt = buf; + struct ds_panic_req *rp; + struct { + struct ds_data data; + struct ds_panic_res res; + } pkt; + + rp = (struct ds_panic_req *) (dpkt + 1); + + printk(KERN_ALERT PFX "Panic request from " + "LDOM manager received.\n"); + + memset(&pkt, 0, sizeof(pkt)); + pkt.data.tag.type = DS_DATA; + pkt.data.tag.len = sizeof(pkt) - sizeof(struct ds_msg_tag); + pkt.data.handle = dp->handle; + pkt.res.req_num = rp->req_num; + pkt.res.result = DS_OK; + pkt.res.reason[0] = 0; + + ds_send(lp, &pkt, sizeof(pkt)); + + panic("PANIC requested by LDOM manager."); +} + +#ifdef CONFIG_HOTPLUG_CPU +struct dr_cpu_tag { + __u64 req_num; + __u32 type; +#define DR_CPU_CONFIGURE 0x43 +#define DR_CPU_UNCONFIGURE 0x55 +#define DR_CPU_FORCE_UNCONFIGURE 0x46 +#define DR_CPU_STATUS 0x53 + +/* Responses */ +#define DR_CPU_OK 0x6f +#define DR_CPU_ERROR 0x65 + + __u32 num_records; +}; + +struct dr_cpu_resp_entry { + __u32 cpu; + __u32 result; +#define DR_CPU_RES_OK 0x00 +#define DR_CPU_RES_FAILURE 0x01 +#define DR_CPU_RES_BLOCKED 0x02 +#define DR_CPU_RES_CPU_NOT_RESPONDING 0x03 +#define DR_CPU_RES_NOT_IN_MD 0x04 + + __u32 stat; +#define DR_CPU_STAT_NOT_PRESENT 0x00 +#define DR_CPU_STAT_UNCONFIGURED 0x01 +#define DR_CPU_STAT_CONFIGURED 0x02 + + __u32 str_off; +}; + +static void __dr_cpu_send_error(struct ds_cap_state *cp, struct ds_data *data) +{ + struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1); + struct ds_info *dp = ds_info; + struct { + struct ds_data data; + struct dr_cpu_tag tag; + } pkt; + int msg_len; + + memset(&pkt, 0, sizeof(pkt)); + pkt.data.tag.type = DS_DATA; + pkt.data.handle = cp->handle; + pkt.tag.req_num = tag->req_num; + pkt.tag.type = DR_CPU_ERROR; + pkt.tag.num_records = 0; + + msg_len = (sizeof(struct ds_data) + + sizeof(struct dr_cpu_tag)); + + pkt.data.tag.len = msg_len - sizeof(struct ds_msg_tag); + + __ds_send(dp->lp, &pkt, msg_len); +} + +static void dr_cpu_send_error(struct ds_cap_state *cp, struct ds_data *data) +{ + unsigned long flags; + + spin_lock_irqsave(&ds_lock, flags); + __dr_cpu_send_error(cp, data); + spin_unlock_irqrestore(&ds_lock, flags); +} + +#define CPU_SENTINEL 0xffffffff + +static void purge_dups(u32 *list, u32 num_ents) +{ + unsigned int i; + + for (i = 0; i < num_ents; i++) { + u32 cpu = list[i]; + unsigned int j; + + if (cpu == CPU_SENTINEL) + continue; + + for (j = i + 1; j < num_ents; j++) { + if (list[j] == cpu) + list[j] = CPU_SENTINEL; + } + } +} + +static int dr_cpu_size_response(int ncpus) +{ + return (sizeof(struct ds_data) + + sizeof(struct dr_cpu_tag) + + (sizeof(struct dr_cpu_resp_entry) * ncpus)); +} + +static void dr_cpu_init_response(struct ds_data *resp, u64 req_num, + u64 handle, int resp_len, int ncpus, + cpumask_t *mask, u32 default_stat) +{ + struct dr_cpu_resp_entry *ent; + struct dr_cpu_tag *tag; + int i, cpu; + + tag = (struct dr_cpu_tag *) (resp + 1); + ent = (struct dr_cpu_resp_entry *) (tag + 1); + + resp->tag.type = DS_DATA; + resp->tag.len = resp_len - sizeof(struct ds_msg_tag); + resp->handle = handle; + tag->req_num = req_num; + tag->type = DR_CPU_OK; + tag->num_records = ncpus; + + i = 0; + for_each_cpu_mask(cpu, *mask) { + ent[i].cpu = cpu; + ent[i].result = DR_CPU_RES_OK; + ent[i].stat = default_stat; + i++; + } + BUG_ON(i != ncpus); +} + +static void dr_cpu_mark(struct ds_data *resp, int cpu, int ncpus, + u32 res, u32 stat) +{ + struct dr_cpu_resp_entry *ent; + struct dr_cpu_tag *tag; + int i; + + tag = (struct dr_cpu_tag *) (resp + 1); + ent = (struct dr_cpu_resp_entry *) (tag + 1); + + for (i = 0; i < ncpus; i++) { + if (ent[i].cpu != cpu) + continue; + ent[i].result = res; + ent[i].stat = stat; + break; + } +} + +static int dr_cpu_configure(struct ds_cap_state *cp, u64 req_num, + cpumask_t *mask) +{ + struct ds_data *resp; + int resp_len, ncpus, cpu; + unsigned long flags; + + ncpus = cpus_weight(*mask); + resp_len = dr_cpu_size_response(ncpus); + resp = kzalloc(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + dr_cpu_init_response(resp, req_num, cp->handle, + resp_len, ncpus, mask, + DR_CPU_STAT_CONFIGURED); + + mdesc_fill_in_cpu_data(*mask); + + for_each_cpu_mask(cpu, *mask) { + int err; + + printk(KERN_INFO PFX "Starting cpu %d...\n", cpu); + err = cpu_up(cpu); + if (err) { + __u32 res = DR_CPU_RES_FAILURE; + __u32 stat = DR_CPU_STAT_UNCONFIGURED; + + if (!cpu_present(cpu)) { + /* CPU not present in MD */ + res = DR_CPU_RES_NOT_IN_MD; + stat = DR_CPU_STAT_NOT_PRESENT; + } else if (err == -ENODEV) { + /* CPU did not call in successfully */ + res = DR_CPU_RES_CPU_NOT_RESPONDING; + } + + printk(KERN_INFO PFX "CPU startup failed err=%d\n", + err); + dr_cpu_mark(resp, cpu, ncpus, res, stat); + } + } + + spin_lock_irqsave(&ds_lock, flags); + __ds_send(ds_info->lp, resp, resp_len); + spin_unlock_irqrestore(&ds_lock, flags); + + kfree(resp); + + /* Redistribute IRQs, taking into account the new cpus. */ + fixup_irqs(); + + return 0; +} + +static int dr_cpu_unconfigure(struct ds_cap_state *cp, u64 req_num, + cpumask_t *mask) +{ + struct ds_data *resp; + int resp_len, ncpus, cpu; + unsigned long flags; + + ncpus = cpus_weight(*mask); + resp_len = dr_cpu_size_response(ncpus); + resp = kzalloc(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + dr_cpu_init_response(resp, req_num, cp->handle, + resp_len, ncpus, mask, + DR_CPU_STAT_UNCONFIGURED); + + for_each_cpu_mask(cpu, *mask) { + int err; + + printk(KERN_INFO PFX "CPU[%d]: Shutting down cpu %d...\n", + smp_processor_id(), cpu); + err = cpu_down(cpu); + if (err) + dr_cpu_mark(resp, cpu, ncpus, + DR_CPU_RES_FAILURE, + DR_CPU_STAT_CONFIGURED); + } + + spin_lock_irqsave(&ds_lock, flags); + __ds_send(ds_info->lp, resp, resp_len); + spin_unlock_irqrestore(&ds_lock, flags); + + kfree(resp); + + return 0; +} + +static void dr_cpu_data(struct ldc_channel *lp, + struct ds_cap_state *cp, + void *buf, int len) +{ + struct ds_data *data = buf; + struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1); + u32 *cpu_list = (u32 *) (tag + 1); + u64 req_num = tag->req_num; + cpumask_t mask; + unsigned int i; + int err; + + switch (tag->type) { + case DR_CPU_CONFIGURE: + case DR_CPU_UNCONFIGURE: + case DR_CPU_FORCE_UNCONFIGURE: + break; + + default: + dr_cpu_send_error(cp, data); + return; + } + + purge_dups(cpu_list, tag->num_records); + + cpus_clear(mask); + for (i = 0; i < tag->num_records; i++) { + if (cpu_list[i] == CPU_SENTINEL) + continue; + + if (cpu_list[i] < NR_CPUS) + cpu_set(cpu_list[i], mask); + } + + if (tag->type == DR_CPU_CONFIGURE) + err = dr_cpu_configure(cp, req_num, &mask); + else + err = dr_cpu_unconfigure(cp, req_num, &mask); + + if (err) + dr_cpu_send_error(cp, data); +} +#endif /* CONFIG_HOTPLUG_CPU */ + +struct ds_pri_msg { + __u64 req_num; + __u64 type; +#define DS_PRI_REQUEST 0x00 +#define DS_PRI_DATA 0x01 +#define DS_PRI_UPDATE 0x02 +}; + +static void ds_pri_data(struct ldc_channel *lp, + struct ds_cap_state *dp, + void *buf, int len) +{ + struct ds_data *dpkt = buf; + struct ds_pri_msg *rp; + + rp = (struct ds_pri_msg *) (dpkt + 1); + + printk(KERN_INFO PFX "PRI REQ [%lx:%lx], len=%d\n", + rp->req_num, rp->type, len); +} + +struct ds_var_hdr { + __u32 type; +#define DS_VAR_SET_REQ 0x00 +#define DS_VAR_DELETE_REQ 0x01 +#define DS_VAR_SET_RESP 0x02 +#define DS_VAR_DELETE_RESP 0x03 +}; + +struct ds_var_set_msg { + struct ds_var_hdr hdr; + char name_and_value[0]; +}; + +struct ds_var_delete_msg { + struct ds_var_hdr hdr; + char name[0]; +}; + +struct ds_var_resp { + struct ds_var_hdr hdr; + __u32 result; +#define DS_VAR_SUCCESS 0x00 +#define DS_VAR_NO_SPACE 0x01 +#define DS_VAR_INVALID_VAR 0x02 +#define DS_VAR_INVALID_VAL 0x03 +#define DS_VAR_NOT_PRESENT 0x04 +}; + +static DEFINE_MUTEX(ds_var_mutex); +static int ds_var_doorbell; +static int ds_var_response; + +static void ds_var_data(struct ldc_channel *lp, + struct ds_cap_state *dp, + void *buf, int len) +{ + struct ds_data *dpkt = buf; + struct ds_var_resp *rp; + + rp = (struct ds_var_resp *) (dpkt + 1); + + if (rp->hdr.type != DS_VAR_SET_RESP && + rp->hdr.type != DS_VAR_DELETE_RESP) + return; + + ds_var_response = rp->result; + wmb(); + ds_var_doorbell = 1; +} + +void ldom_set_var(const char *var, const char *value) +{ + struct ds_info *dp = ds_info; + struct ds_cap_state *cp; + + cp = find_cap_by_string("var-config"); + if (cp->state != CAP_STATE_REGISTERED) + cp = find_cap_by_string("var-config-backup"); + + if (cp->state == CAP_STATE_REGISTERED) { + union { + struct { + struct ds_data data; + struct ds_var_set_msg msg; + } header; + char all[512]; + } pkt; + unsigned long flags; + char *base, *p; + int msg_len, loops; + + memset(&pkt, 0, sizeof(pkt)); + pkt.header.data.tag.type = DS_DATA; + pkt.header.data.handle = cp->handle; + pkt.header.msg.hdr.type = DS_VAR_SET_REQ; + base = p = &pkt.header.msg.name_and_value[0]; + strcpy(p, var); + p += strlen(var) + 1; + strcpy(p, value); + p += strlen(value) + 1; + + msg_len = (sizeof(struct ds_data) + + sizeof(struct ds_var_set_msg) + + (p - base)); + msg_len = (msg_len + 3) & ~3; + pkt.header.data.tag.len = msg_len - sizeof(struct ds_msg_tag); + + mutex_lock(&ds_var_mutex); + + spin_lock_irqsave(&ds_lock, flags); + ds_var_doorbell = 0; + ds_var_response = -1; + + __ds_send(dp->lp, &pkt, msg_len); + spin_unlock_irqrestore(&ds_lock, flags); + + loops = 1000; + while (ds_var_doorbell == 0) { + if (loops-- < 0) + break; + barrier(); + udelay(100); + } + + mutex_unlock(&ds_var_mutex); + + if (ds_var_doorbell == 0 || + ds_var_response != DS_VAR_SUCCESS) + printk(KERN_ERR PFX "var-config [%s:%s] " + "failed, response(%d).\n", + var, value, + ds_var_response); + } else { + printk(KERN_ERR PFX "var-config not registered so " + "could not set (%s) variable to (%s).\n", + var, value); + } +} + +void ldom_reboot(const char *boot_command) +{ + /* Don't bother with any of this if the boot_command + * is empty. + */ + if (boot_command && strlen(boot_command)) { + char full_boot_str[256]; + + strcpy(full_boot_str, "boot "); + strcpy(full_boot_str + strlen("boot "), boot_command); + + ldom_set_var("reboot-command", full_boot_str); + } + sun4v_mach_sir(); +} + +void ldom_power_off(void) +{ + sun4v_mach_exit(0); +} + +static void ds_conn_reset(struct ds_info *dp) +{ + printk(KERN_ERR PFX "ds_conn_reset() from %p\n", + __builtin_return_address(0)); +} + +static int register_services(struct ds_info *dp) +{ + struct ldc_channel *lp = dp->lp; + int i; + + for (i = 0; i < ARRAY_SIZE(ds_states); i++) { + struct { + struct ds_reg_req req; + u8 id_buf[256]; + } pbuf; + struct ds_cap_state *cp = &ds_states[i]; + int err, msg_len; + u64 new_count; + + if (cp->state == CAP_STATE_REGISTERED) + continue; + + new_count = sched_clock() & 0xffffffff; + cp->handle = ((u64) i << 32) | new_count; + + msg_len = (sizeof(struct ds_reg_req) + + strlen(cp->service_id)); + + memset(&pbuf, 0, sizeof(pbuf)); + pbuf.req.tag.type = DS_REG_REQ; + pbuf.req.tag.len = (msg_len - sizeof(struct ds_msg_tag)); + pbuf.req.handle = cp->handle; + pbuf.req.major = 1; + pbuf.req.minor = 0; + strcpy(pbuf.req.svc_id, cp->service_id); + + err = __ds_send(lp, &pbuf, msg_len); + if (err > 0) + cp->state = CAP_STATE_REG_SENT; + } + return 0; +} + +static int ds_handshake(struct ds_info *dp, struct ds_msg_tag *pkt) +{ + + if (dp->hs_state == DS_HS_START) { + if (pkt->type != DS_INIT_ACK) + goto conn_reset; + + dp->hs_state = DS_HS_DONE; + + return register_services(dp); + } + + if (dp->hs_state != DS_HS_DONE) + goto conn_reset; + + if (pkt->type == DS_REG_ACK) { + struct ds_reg_ack *ap = (struct ds_reg_ack *) pkt; + struct ds_cap_state *cp = find_cap(ap->handle); + + if (!cp) { + printk(KERN_ERR PFX "REG ACK for unknown handle %lx\n", + ap->handle); + return 0; + } + printk(KERN_INFO PFX "Registered %s service.\n", + cp->service_id); + cp->state = CAP_STATE_REGISTERED; + } else if (pkt->type == DS_REG_NACK) { + struct ds_reg_nack *np = (struct ds_reg_nack *) pkt; + struct ds_cap_state *cp = find_cap(np->handle); + + if (!cp) { + printk(KERN_ERR PFX "REG NACK for " + "unknown handle %lx\n", + np->handle); + return 0; + } + printk(KERN_INFO PFX "Could not register %s service\n", + cp->service_id); + cp->state = CAP_STATE_UNKNOWN; + } + + return 0; + +conn_reset: + ds_conn_reset(dp); + return -ECONNRESET; +} + +static void __send_ds_nack(struct ds_info *dp, u64 handle) +{ + struct ds_data_nack nack = { + .tag = { + .type = DS_NACK, + .len = (sizeof(struct ds_data_nack) - + sizeof(struct ds_msg_tag)), + }, + .handle = handle, + .result = DS_INV_HDL, + }; + + __ds_send(dp->lp, &nack, sizeof(nack)); +} + +static LIST_HEAD(ds_work_list); +static DECLARE_WAIT_QUEUE_HEAD(ds_wait); + +struct ds_queue_entry { + struct list_head list; + int req_len; + int __pad; + u64 req[0]; +}; + +static void process_ds_work(void) +{ + struct ds_queue_entry *qp, *tmp; + static struct ds_info *dp; + unsigned long flags; + LIST_HEAD(todo); + + spin_lock_irqsave(&ds_lock, flags); + list_splice(&ds_work_list, &todo); + INIT_LIST_HEAD(&ds_work_list); + spin_unlock_irqrestore(&ds_lock, flags); + + dp = ds_info; + + list_for_each_entry_safe(qp, tmp, &todo, list) { + struct ds_data *dpkt = (struct ds_data *) qp->req; + struct ds_cap_state *cp = find_cap(dpkt->handle); + int req_len = qp->req_len; + + if (!cp) { + printk(KERN_ERR PFX "Data for unknown handle %lu\n", + dpkt->handle); + + spin_lock_irqsave(&ds_lock, flags); + __send_ds_nack(dp, dpkt->handle); + spin_unlock_irqrestore(&ds_lock, flags); + } else { + cp->data(dp->lp, cp, dpkt, req_len); + } + + list_del(&qp->list); + kfree(qp); + } +} + +static int ds_thread(void *__unused) +{ + DEFINE_WAIT(wait); + + while (1) { + prepare_to_wait(&ds_wait, &wait, TASK_INTERRUPTIBLE); + if (list_empty(&ds_work_list)) + schedule(); + finish_wait(&ds_wait, &wait); + + if (kthread_should_stop()) + break; + + process_ds_work(); + } + + return 0; +} + +static int ds_data(struct ds_info *dp, struct ds_msg_tag *pkt, int len) +{ + struct ds_data *dpkt = (struct ds_data *) pkt; + struct ds_queue_entry *qp; + + qp = kmalloc(sizeof(struct ds_queue_entry) + len, GFP_ATOMIC); + if (!qp) { + __send_ds_nack(dp, dpkt->handle); + } else { + memcpy(&qp->req, pkt, len); + list_add_tail(&qp->list, &ds_work_list); + wake_up(&ds_wait); + } + return 0; +} + +static void ds_up(struct ds_info *dp) +{ + struct ldc_channel *lp = dp->lp; + struct ds_ver_req req; + int err; + + req.tag.type = DS_INIT_REQ; + req.tag.len = sizeof(req) - sizeof(struct ds_msg_tag); + req.ver.major = 1; + req.ver.minor = 0; + + err = __ds_send(lp, &req, sizeof(req)); + if (err > 0) + dp->hs_state = DS_HS_START; +} + +static void ds_event(void *arg, int event) +{ + struct ds_info *dp = arg; + struct ldc_channel *lp = dp->lp; + unsigned long flags; + int err; + + spin_lock_irqsave(&ds_lock, flags); + + if (event == LDC_EVENT_UP) { + ds_up(dp); + spin_unlock_irqrestore(&ds_lock, flags); + return; + } + + if (event != LDC_EVENT_DATA_READY) { + printk(KERN_WARNING PFX "Unexpected LDC event %d\n", event); + spin_unlock_irqrestore(&ds_lock, flags); + return; + } + + err = 0; + while (1) { + struct ds_msg_tag *tag; + + err = ldc_read(lp, dp->rcv_buf, sizeof(*tag)); + + if (unlikely(err < 0)) { + if (err == -ECONNRESET) + ds_conn_reset(dp); + break; + } + if (err == 0) + break; + + tag = dp->rcv_buf; + err = ldc_read(lp, tag + 1, tag->len); + + if (unlikely(err < 0)) { + if (err == -ECONNRESET) + ds_conn_reset(dp); + break; + } + if (err < tag->len) + break; + + if (tag->type < DS_DATA) + err = ds_handshake(dp, dp->rcv_buf); + else + err = ds_data(dp, dp->rcv_buf, + sizeof(*tag) + err); + if (err == -ECONNRESET) + break; + } + + spin_unlock_irqrestore(&ds_lock, flags); +} + +static int __devinit ds_probe(struct vio_dev *vdev, + const struct vio_device_id *id) +{ + static int ds_version_printed; + struct ldc_channel_config ds_cfg = { + .event = ds_event, + .mtu = 4096, + .mode = LDC_MODE_STREAM, + }; + struct ldc_channel *lp; + struct ds_info *dp; + int err; + + if (ds_version_printed++ == 0) + printk(KERN_INFO "%s", version); + + dp = kzalloc(sizeof(*dp), GFP_KERNEL); + err = -ENOMEM; + if (!dp) + goto out_err; + + dp->rcv_buf = kzalloc(4096, GFP_KERNEL); + if (!dp->rcv_buf) + goto out_free_dp; + + dp->rcv_buf_len = 4096; + + ds_cfg.tx_irq = vdev->tx_irq; + ds_cfg.rx_irq = vdev->rx_irq; + + lp = ldc_alloc(vdev->channel_id, &ds_cfg, dp); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out_free_rcv_buf; + } + dp->lp = lp; + + err = ldc_bind(lp, "DS"); + if (err) + goto out_free_ldc; + + ds_info = dp; + + start_powerd(); + + return err; + +out_free_ldc: + ldc_free(dp->lp); + +out_free_rcv_buf: + kfree(dp->rcv_buf); + +out_free_dp: + kfree(dp); + +out_err: + return err; +} + +static int ds_remove(struct vio_dev *vdev) +{ + return 0; +} + +static struct vio_device_id ds_match[] = { + { + .type = "domain-services-port", + }, + {}, +}; + +static struct vio_driver ds_driver = { + .id_table = ds_match, + .probe = ds_probe, + .remove = ds_remove, + .driver = { + .name = "ds", + .owner = THIS_MODULE, + } +}; + +static int __init ds_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ds_states); i++) + ds_states[i].handle = ((u64)i << 32); + + kthread_run(ds_thread, NULL, "kldomd"); + + return vio_register_driver(&ds_driver); +} + +subsys_initcall(ds_init); diff --git a/arch/sparc64/kernel/hvtramp.S b/arch/sparc64/kernel/hvtramp.S new file mode 100644 index 000000000000..76a090e2c2a8 --- /dev/null +++ b/arch/sparc64/kernel/hvtramp.S @@ -0,0 +1,139 @@ +/* hvtramp.S: Hypervisor start-cpu trampoline code. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ + +#include <asm/thread_info.h> +#include <asm/hypervisor.h> +#include <asm/scratchpad.h> +#include <asm/spitfire.h> +#include <asm/hvtramp.h> +#include <asm/pstate.h> +#include <asm/ptrace.h> +#include <asm/asi.h> + + .text + .align 8 + .globl hv_cpu_startup, hv_cpu_startup_end + + /* This code executes directly out of the hypervisor + * with physical addressing (va==pa). %o0 contains + * our client argument which for Linux points to + * a descriptor data structure which defines the + * MMU entries we need to load up. + * + * After we set things up we enable the MMU and call + * into the kernel. + * + * First setup basic privileged cpu state. + */ +hv_cpu_startup: + wrpr %g0, 0, %gl + wrpr %g0, 15, %pil + wrpr %g0, 0, %canrestore + wrpr %g0, 0, %otherwin + wrpr %g0, 6, %cansave + wrpr %g0, 6, %cleanwin + wrpr %g0, 0, %cwp + wrpr %g0, 0, %wstate + wrpr %g0, 0, %tl + + sethi %hi(sparc64_ttable_tl0), %g1 + wrpr %g1, %tba + + mov %o0, %l0 + + lduw [%l0 + HVTRAMP_DESCR_CPU], %g1 + mov SCRATCHPAD_CPUID, %g2 + stxa %g1, [%g2] ASI_SCRATCHPAD + + ldx [%l0 + HVTRAMP_DESCR_FAULT_INFO_VA], %g2 + stxa %g2, [%g0] ASI_SCRATCHPAD + + mov 0, %l1 + lduw [%l0 + HVTRAMP_DESCR_NUM_MAPPINGS], %l2 + add %l0, HVTRAMP_DESCR_MAPS, %l3 + +1: ldx [%l3 + HVTRAMP_MAPPING_VADDR], %o0 + clr %o1 + ldx [%l3 + HVTRAMP_MAPPING_TTE], %o2 + mov HV_MMU_IMMU | HV_MMU_DMMU, %o3 + mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 + ta HV_FAST_TRAP + + brnz,pn %o0, 80f + nop + + add %l1, 1, %l1 + cmp %l1, %l2 + blt,a,pt %xcc, 1b + add %l3, HVTRAMP_MAPPING_SIZE, %l3 + + ldx [%l0 + HVTRAMP_DESCR_FAULT_INFO_PA], %o0 + mov HV_FAST_MMU_FAULT_AREA_CONF, %o5 + ta HV_FAST_TRAP + + brnz,pn %o0, 80f + nop + + wrpr %g0, (PSTATE_PRIV | PSTATE_PEF), %pstate + + ldx [%l0 + HVTRAMP_DESCR_THREAD_REG], %l6 + + mov 1, %o0 + set 1f, %o1 + mov HV_FAST_MMU_ENABLE, %o5 + ta HV_FAST_TRAP + + ba,pt %xcc, 80f + nop + +1: + wr %g0, 0, %fprs + wr %g0, ASI_P, %asi + + mov PRIMARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_MMU + membar #Sync + + mov SECONDARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_MMU + membar #Sync + + mov %l6, %g6 + ldx [%g6 + TI_TASK], %g4 + + mov 1, %g5 + sllx %g5, THREAD_SHIFT, %g5 + sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5 + add %g6, %g5, %sp + mov 0, %fp + + call init_irqwork_curcpu + nop + call hard_smp_processor_id + nop + + mov %o0, %o1 + mov 0, %o0 + mov 0, %o2 + call sun4v_init_mondo_queues + mov 1, %o3 + + call init_cur_cpu_trap + mov %g6, %o0 + + wrpr %g0, (PSTATE_PRIV | PSTATE_PEF | PSTATE_IE), %pstate + + call smp_callin + nop + call cpu_idle + mov 0, %o0 + call cpu_panic + nop + +80: ba,pt %xcc, 80b + nop + + .align 8 +hv_cpu_startup_end: diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 6b6165d36fd8..8cb3358674f5 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -293,6 +293,11 @@ static void sun4u_irq_enable(unsigned int virt_irq) } } +static void sun4u_set_affinity(unsigned int virt_irq, cpumask_t mask) +{ + sun4u_irq_enable(virt_irq); +} + static void sun4u_irq_disable(unsigned int virt_irq) { struct irq_handler_data *data = get_irq_chip_data(virt_irq); @@ -309,6 +314,10 @@ static void sun4u_irq_disable(unsigned int virt_irq) static void sun4u_irq_end(unsigned int virt_irq) { struct irq_handler_data *data = get_irq_chip_data(virt_irq); + struct irq_desc *desc = irq_desc + virt_irq; + + if (unlikely(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) + return; if (likely(data)) upa_writeq(ICLR_IDLE, data->iclr); @@ -340,6 +349,24 @@ static void sun4v_irq_enable(unsigned int virt_irq) } } +static void sun4v_set_affinity(unsigned int virt_irq, cpumask_t mask) +{ + struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); + unsigned int ino = bucket - &ivector_table[0]; + + if (likely(bucket)) { + unsigned long cpuid; + int err; + + cpuid = irq_choose_cpu(virt_irq); + + err = sun4v_intr_settarget(ino, cpuid); + if (err != HV_EOK) + printk("sun4v_intr_settarget(%x,%lu): err(%d)\n", + ino, cpuid, err); + } +} + static void sun4v_irq_disable(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); @@ -373,6 +400,10 @@ static void sun4v_irq_end(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); unsigned int ino = bucket - &ivector_table[0]; + struct irq_desc *desc = irq_desc + virt_irq; + + if (unlikely(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) + return; if (likely(bucket)) { int err; @@ -418,6 +449,28 @@ static void sun4v_virq_enable(unsigned int virt_irq) } } +static void sun4v_virt_set_affinity(unsigned int virt_irq, cpumask_t mask) +{ + struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); + unsigned int ino = bucket - &ivector_table[0]; + + if (likely(bucket)) { + unsigned long cpuid, dev_handle, dev_ino; + int err; + + cpuid = irq_choose_cpu(virt_irq); + + dev_handle = ino & IMAP_IGN; + dev_ino = ino & IMAP_INO; + + err = sun4v_vintr_set_target(dev_handle, dev_ino, cpuid); + if (err != HV_EOK) + printk("sun4v_vintr_set_target(%lx,%lx,%lu): " + "err(%d)\n", + dev_handle, dev_ino, cpuid, err); + } +} + static void sun4v_virq_disable(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); @@ -443,6 +496,10 @@ static void sun4v_virq_end(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); unsigned int ino = bucket - &ivector_table[0]; + struct irq_desc *desc = irq_desc + virt_irq; + + if (unlikely(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) + return; if (likely(bucket)) { unsigned long dev_handle, dev_ino; @@ -477,6 +534,7 @@ static struct irq_chip sun4u_irq = { .enable = sun4u_irq_enable, .disable = sun4u_irq_disable, .end = sun4u_irq_end, + .set_affinity = sun4u_set_affinity, }; static struct irq_chip sun4u_irq_ack = { @@ -485,6 +543,7 @@ static struct irq_chip sun4u_irq_ack = { .disable = sun4u_irq_disable, .ack = run_pre_handler, .end = sun4u_irq_end, + .set_affinity = sun4u_set_affinity, }; static struct irq_chip sun4v_irq = { @@ -492,6 +551,7 @@ static struct irq_chip sun4v_irq = { .enable = sun4v_irq_enable, .disable = sun4v_irq_disable, .end = sun4v_irq_end, + .set_affinity = sun4v_set_affinity, }; static struct irq_chip sun4v_irq_ack = { @@ -500,6 +560,7 @@ static struct irq_chip sun4v_irq_ack = { .disable = sun4v_irq_disable, .ack = run_pre_handler, .end = sun4v_irq_end, + .set_affinity = sun4v_set_affinity, }; #ifdef CONFIG_PCI_MSI @@ -511,6 +572,7 @@ static struct irq_chip sun4v_msi = { .disable = sun4v_msi_disable, .ack = run_pre_handler, .end = sun4v_irq_end, + .set_affinity = sun4v_set_affinity, }; #endif @@ -519,6 +581,7 @@ static struct irq_chip sun4v_virq = { .enable = sun4v_virq_enable, .disable = sun4v_virq_disable, .end = sun4v_virq_end, + .set_affinity = sun4v_virt_set_affinity, }; static struct irq_chip sun4v_virq_ack = { @@ -527,6 +590,7 @@ static struct irq_chip sun4v_virq_ack = { .disable = sun4v_virq_disable, .ack = run_pre_handler, .end = sun4v_virq_end, + .set_affinity = sun4v_virt_set_affinity, }; void irq_install_pre_handler(int virt_irq, @@ -739,6 +803,26 @@ void handler_irq(int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +#ifdef CONFIG_HOTPLUG_CPU +void fixup_irqs(void) +{ + unsigned int irq; + + for (irq = 0; irq < NR_IRQS; irq++) { + unsigned long flags; + + spin_lock_irqsave(&irq_desc[irq].lock, flags); + if (irq_desc[irq].action && + !(irq_desc[irq].status & IRQ_PER_CPU)) { + if (irq_desc[irq].chip->set_affinity) + irq_desc[irq].chip->set_affinity(irq, + irq_desc[irq].affinity); + } + spin_unlock_irqrestore(&irq_desc[irq].lock, flags); + } +} +#endif + struct sun5_timer { u64 count0; u64 limit0; diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c new file mode 100644 index 000000000000..85a2be0b0962 --- /dev/null +++ b/arch/sparc64/kernel/ldc.c @@ -0,0 +1,2373 @@ +/* ldc.c: Logical Domain Channel link-layer protocol driver. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/scatterlist.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/init.h> + +#include <asm/hypervisor.h> +#include <asm/iommu.h> +#include <asm/page.h> +#include <asm/ldc.h> +#include <asm/mdesc.h> + +#define DRV_MODULE_NAME "ldc" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "June 25, 2007" + +static char version[] __devinitdata = + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; +#define LDC_PACKET_SIZE 64 + +/* Packet header layout for unreliable and reliable mode frames. + * When in RAW mode, packets are simply straight 64-byte payloads + * with no headers. + */ +struct ldc_packet { + u8 type; +#define LDC_CTRL 0x01 +#define LDC_DATA 0x02 +#define LDC_ERR 0x10 + + u8 stype; +#define LDC_INFO 0x01 +#define LDC_ACK 0x02 +#define LDC_NACK 0x04 + + u8 ctrl; +#define LDC_VERS 0x01 /* Link Version */ +#define LDC_RTS 0x02 /* Request To Send */ +#define LDC_RTR 0x03 /* Ready To Receive */ +#define LDC_RDX 0x04 /* Ready for Data eXchange */ +#define LDC_CTRL_MSK 0x0f + + u8 env; +#define LDC_LEN 0x3f +#define LDC_FRAG_MASK 0xc0 +#define LDC_START 0x40 +#define LDC_STOP 0x80 + + u32 seqid; + + union { + u8 u_data[LDC_PACKET_SIZE - 8]; + struct { + u32 pad; + u32 ackid; + u8 r_data[LDC_PACKET_SIZE - 8 - 8]; + } r; + } u; +}; + +struct ldc_version { + u16 major; + u16 minor; +}; + +/* Ordered from largest major to lowest. */ +static struct ldc_version ver_arr[] = { + { .major = 1, .minor = 0 }, +}; + +#define LDC_DEFAULT_MTU (4 * LDC_PACKET_SIZE) +#define LDC_DEFAULT_NUM_ENTRIES (PAGE_SIZE / LDC_PACKET_SIZE) + +struct ldc_channel; + +struct ldc_mode_ops { + int (*write)(struct ldc_channel *, const void *, unsigned int); + int (*read)(struct ldc_channel *, void *, unsigned int); +}; + +static const struct ldc_mode_ops raw_ops; +static const struct ldc_mode_ops nonraw_ops; +static const struct ldc_mode_ops stream_ops; + +int ldom_domaining_enabled; + +struct ldc_iommu { + /* Protects arena alloc/free. */ + spinlock_t lock; + struct iommu_arena arena; + struct ldc_mtable_entry *page_table; +}; + +struct ldc_channel { + /* Protects all operations that depend upon channel state. */ + spinlock_t lock; + + unsigned long id; + + u8 *mssbuf; + u32 mssbuf_len; + u32 mssbuf_off; + + struct ldc_packet *tx_base; + unsigned long tx_head; + unsigned long tx_tail; + unsigned long tx_num_entries; + unsigned long tx_ra; + + unsigned long tx_acked; + + struct ldc_packet *rx_base; + unsigned long rx_head; + unsigned long rx_tail; + unsigned long rx_num_entries; + unsigned long rx_ra; + + u32 rcv_nxt; + u32 snd_nxt; + + unsigned long chan_state; + + struct ldc_channel_config cfg; + void *event_arg; + + const struct ldc_mode_ops *mops; + + struct ldc_iommu iommu; + + struct ldc_version ver; + + u8 hs_state; +#define LDC_HS_CLOSED 0x00 +#define LDC_HS_OPEN 0x01 +#define LDC_HS_GOTVERS 0x02 +#define LDC_HS_SENTRTR 0x03 +#define LDC_HS_GOTRTR 0x04 +#define LDC_HS_COMPLETE 0x10 + + u8 flags; +#define LDC_FLAG_ALLOCED_QUEUES 0x01 +#define LDC_FLAG_REGISTERED_QUEUES 0x02 +#define LDC_FLAG_REGISTERED_IRQS 0x04 +#define LDC_FLAG_RESET 0x10 + + u8 mss; + u8 state; + +#define LDC_IRQ_NAME_MAX 32 + char rx_irq_name[LDC_IRQ_NAME_MAX]; + char tx_irq_name[LDC_IRQ_NAME_MAX]; + + struct hlist_head mh_list; + + struct hlist_node list; +}; + +#define ldcdbg(TYPE, f, a...) \ +do { if (lp->cfg.debug & LDC_DEBUG_##TYPE) \ + printk(KERN_INFO PFX "ID[%lu] " f, lp->id, ## a); \ +} while (0) + +static const char *state_to_str(u8 state) +{ + switch (state) { + case LDC_STATE_INVALID: + return "INVALID"; + case LDC_STATE_INIT: + return "INIT"; + case LDC_STATE_BOUND: + return "BOUND"; + case LDC_STATE_READY: + return "READY"; + case LDC_STATE_CONNECTED: + return "CONNECTED"; + default: + return "<UNKNOWN>"; + } +} + +static void ldc_set_state(struct ldc_channel *lp, u8 state) +{ + ldcdbg(STATE, "STATE (%s) --> (%s)\n", + state_to_str(lp->state), + state_to_str(state)); + + lp->state = state; +} + +static unsigned long __advance(unsigned long off, unsigned long num_entries) +{ + off += LDC_PACKET_SIZE; + if (off == (num_entries * LDC_PACKET_SIZE)) + off = 0; + + return off; +} + +static unsigned long rx_advance(struct ldc_channel *lp, unsigned long off) +{ + return __advance(off, lp->rx_num_entries); +} + +static unsigned long tx_advance(struct ldc_channel *lp, unsigned long off) +{ + return __advance(off, lp->tx_num_entries); +} + +static struct ldc_packet *handshake_get_tx_packet(struct ldc_channel *lp, + unsigned long *new_tail) +{ + struct ldc_packet *p; + unsigned long t; + + t = tx_advance(lp, lp->tx_tail); + if (t == lp->tx_head) + return NULL; + + *new_tail = t; + + p = lp->tx_base; + return p + (lp->tx_tail / LDC_PACKET_SIZE); +} + +/* When we are in reliable or stream mode, have to track the next packet + * we haven't gotten an ACK for in the TX queue using tx_acked. We have + * to be careful not to stomp over the queue past that point. During + * the handshake, we don't have TX data packets pending in the queue + * and that's why handshake_get_tx_packet() need not be mindful of + * lp->tx_acked. + */ +static unsigned long head_for_data(struct ldc_channel *lp) +{ + if (lp->cfg.mode == LDC_MODE_STREAM) + return lp->tx_acked; + return lp->tx_head; +} + +static int tx_has_space_for(struct ldc_channel *lp, unsigned int size) +{ + unsigned long limit, tail, new_tail, diff; + unsigned int mss; + + limit = head_for_data(lp); + tail = lp->tx_tail; + new_tail = tx_advance(lp, tail); + if (new_tail == limit) + return 0; + + if (limit > new_tail) + diff = limit - new_tail; + else + diff = (limit + + ((lp->tx_num_entries * LDC_PACKET_SIZE) - new_tail)); + diff /= LDC_PACKET_SIZE; + mss = lp->mss; + + if (diff * mss < size) + return 0; + + return 1; +} + +static struct ldc_packet *data_get_tx_packet(struct ldc_channel *lp, + unsigned long *new_tail) +{ + struct ldc_packet *p; + unsigned long h, t; + + h = head_for_data(lp); + t = tx_advance(lp, lp->tx_tail); + if (t == h) + return NULL; + + *new_tail = t; + + p = lp->tx_base; + return p + (lp->tx_tail / LDC_PACKET_SIZE); +} + +static int set_tx_tail(struct ldc_channel *lp, unsigned long tail) +{ + unsigned long orig_tail = lp->tx_tail; + int limit = 1000; + + lp->tx_tail = tail; + while (limit-- > 0) { + unsigned long err; + + err = sun4v_ldc_tx_set_qtail(lp->id, tail); + if (!err) + return 0; + + if (err != HV_EWOULDBLOCK) { + lp->tx_tail = orig_tail; + return -EINVAL; + } + udelay(1); + } + + lp->tx_tail = orig_tail; + return -EBUSY; +} + +/* This just updates the head value in the hypervisor using + * a polling loop with a timeout. The caller takes care of + * upating software state representing the head change, if any. + */ +static int __set_rx_head(struct ldc_channel *lp, unsigned long head) +{ + int limit = 1000; + + while (limit-- > 0) { + unsigned long err; + + err = sun4v_ldc_rx_set_qhead(lp->id, head); + if (!err) + return 0; + + if (err != HV_EWOULDBLOCK) + return -EINVAL; + + udelay(1); + } + + return -EBUSY; +} + +static int send_tx_packet(struct ldc_channel *lp, + struct ldc_packet *p, + unsigned long new_tail) +{ + BUG_ON(p != (lp->tx_base + (lp->tx_tail / LDC_PACKET_SIZE))); + + return set_tx_tail(lp, new_tail); +} + +static struct ldc_packet *handshake_compose_ctrl(struct ldc_channel *lp, + u8 stype, u8 ctrl, + void *data, int dlen, + unsigned long *new_tail) +{ + struct ldc_packet *p = handshake_get_tx_packet(lp, new_tail); + + if (p) { + memset(p, 0, sizeof(*p)); + p->type = LDC_CTRL; + p->stype = stype; + p->ctrl = ctrl; + if (data) + memcpy(p->u.u_data, data, dlen); + } + return p; +} + +static int start_handshake(struct ldc_channel *lp) +{ + struct ldc_packet *p; + struct ldc_version *ver; + unsigned long new_tail; + + ver = &ver_arr[0]; + + ldcdbg(HS, "SEND VER INFO maj[%u] min[%u]\n", + ver->major, ver->minor); + + p = handshake_compose_ctrl(lp, LDC_INFO, LDC_VERS, + ver, sizeof(*ver), &new_tail); + if (p) { + int err = send_tx_packet(lp, p, new_tail); + if (!err) + lp->flags &= ~LDC_FLAG_RESET; + return err; + } + return -EBUSY; +} + +static int send_version_nack(struct ldc_channel *lp, + u16 major, u16 minor) +{ + struct ldc_packet *p; + struct ldc_version ver; + unsigned long new_tail; + + ver.major = major; + ver.minor = minor; + + p = handshake_compose_ctrl(lp, LDC_NACK, LDC_VERS, + &ver, sizeof(ver), &new_tail); + if (p) { + ldcdbg(HS, "SEND VER NACK maj[%u] min[%u]\n", + ver.major, ver.minor); + + return send_tx_packet(lp, p, new_tail); + } + return -EBUSY; +} + +static int send_version_ack(struct ldc_channel *lp, + struct ldc_version *vp) +{ + struct ldc_packet *p; + unsigned long new_tail; + + p = handshake_compose_ctrl(lp, LDC_ACK, LDC_VERS, + vp, sizeof(*vp), &new_tail); + if (p) { + ldcdbg(HS, "SEND VER ACK maj[%u] min[%u]\n", + vp->major, vp->minor); + + return send_tx_packet(lp, p, new_tail); + } + return -EBUSY; +} + +static int send_rts(struct ldc_channel *lp) +{ + struct ldc_packet *p; + unsigned long new_tail; + + p = handshake_compose_ctrl(lp, LDC_INFO, LDC_RTS, NULL, 0, + &new_tail); + if (p) { + p->env = lp->cfg.mode; + p->seqid = 0; + lp->rcv_nxt = 0; + + ldcdbg(HS, "SEND RTS env[0x%x] seqid[0x%x]\n", + p->env, p->seqid); + + return send_tx_packet(lp, p, new_tail); + } + return -EBUSY; +} + +static int send_rtr(struct ldc_channel *lp) +{ + struct ldc_packet *p; + unsigned long new_tail; + + p = handshake_compose_ctrl(lp, LDC_INFO, LDC_RTR, NULL, 0, + &new_tail); + if (p) { + p->env = lp->cfg.mode; + p->seqid = 0; + + ldcdbg(HS, "SEND RTR env[0x%x] seqid[0x%x]\n", + p->env, p->seqid); + + return send_tx_packet(lp, p, new_tail); + } + return -EBUSY; +} + +static int send_rdx(struct ldc_channel *lp) +{ + struct ldc_packet *p; + unsigned long new_tail; + + p = handshake_compose_ctrl(lp, LDC_INFO, LDC_RDX, NULL, 0, + &new_tail); + if (p) { + p->env = 0; + p->seqid = ++lp->snd_nxt; + p->u.r.ackid = lp->rcv_nxt; + + ldcdbg(HS, "SEND RDX env[0x%x] seqid[0x%x] ackid[0x%x]\n", + p->env, p->seqid, p->u.r.ackid); + + return send_tx_packet(lp, p, new_tail); + } + return -EBUSY; +} + +static int send_data_nack(struct ldc_channel *lp, struct ldc_packet *data_pkt) +{ + struct ldc_packet *p; + unsigned long new_tail; + int err; + + p = data_get_tx_packet(lp, &new_tail); + if (!p) + return -EBUSY; + memset(p, 0, sizeof(*p)); + p->type = data_pkt->type; + p->stype = LDC_NACK; + p->ctrl = data_pkt->ctrl & LDC_CTRL_MSK; + p->seqid = lp->snd_nxt + 1; + p->u.r.ackid = lp->rcv_nxt; + + ldcdbg(HS, "SEND DATA NACK type[0x%x] ctl[0x%x] seq[0x%x] ack[0x%x]\n", + p->type, p->ctrl, p->seqid, p->u.r.ackid); + + err = send_tx_packet(lp, p, new_tail); + if (!err) + lp->snd_nxt++; + + return err; +} + +static int ldc_abort(struct ldc_channel *lp) +{ + unsigned long hv_err; + + ldcdbg(STATE, "ABORT\n"); + + /* We report but do not act upon the hypervisor errors because + * there really isn't much we can do if they fail at this point. + */ + hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries); + if (hv_err) + printk(KERN_ERR PFX "ldc_abort: " + "sun4v_ldc_tx_qconf(%lx,%lx,%lx) failed, err=%lu\n", + lp->id, lp->tx_ra, lp->tx_num_entries, hv_err); + + hv_err = sun4v_ldc_tx_get_state(lp->id, + &lp->tx_head, + &lp->tx_tail, + &lp->chan_state); + if (hv_err) + printk(KERN_ERR PFX "ldc_abort: " + "sun4v_ldc_tx_get_state(%lx,...) failed, err=%lu\n", + lp->id, hv_err); + + hv_err = sun4v_ldc_rx_qconf(lp->id, lp->rx_ra, lp->rx_num_entries); + if (hv_err) + printk(KERN_ERR PFX "ldc_abort: " + "sun4v_ldc_rx_qconf(%lx,%lx,%lx) failed, err=%lu\n", + lp->id, lp->rx_ra, lp->rx_num_entries, hv_err); + + /* Refetch the RX queue state as well, because we could be invoked + * here in the queue processing context. + */ + hv_err = sun4v_ldc_rx_get_state(lp->id, + &lp->rx_head, + &lp->rx_tail, + &lp->chan_state); + if (hv_err) + printk(KERN_ERR PFX "ldc_abort: " + "sun4v_ldc_rx_get_state(%lx,...) failed, err=%lu\n", + lp->id, hv_err); + + return -ECONNRESET; +} + +static struct ldc_version *find_by_major(u16 major) +{ + struct ldc_version *ret = NULL; + int i; + + for (i = 0; i < ARRAY_SIZE(ver_arr); i++) { + struct ldc_version *v = &ver_arr[i]; + if (v->major <= major) { + ret = v; + break; + } + } + return ret; +} + +static int process_ver_info(struct ldc_channel *lp, struct ldc_version *vp) +{ + struct ldc_version *vap; + int err; + + ldcdbg(HS, "GOT VERSION INFO major[%x] minor[%x]\n", + vp->major, vp->minor); + + if (lp->hs_state == LDC_HS_GOTVERS) { + lp->hs_state = LDC_HS_OPEN; + memset(&lp->ver, 0, sizeof(lp->ver)); + } + + vap = find_by_major(vp->major); + if (!vap) { + err = send_version_nack(lp, 0, 0); + } else if (vap->major != vp->major) { + err = send_version_nack(lp, vap->major, vap->minor); + } else { + struct ldc_version ver = *vp; + if (ver.minor > vap->minor) + ver.minor = vap->minor; + err = send_version_ack(lp, &ver); + if (!err) { + lp->ver = ver; + lp->hs_state = LDC_HS_GOTVERS; + } + } + if (err) + return ldc_abort(lp); + + return 0; +} + +static int process_ver_ack(struct ldc_channel *lp, struct ldc_version *vp) +{ + ldcdbg(HS, "GOT VERSION ACK major[%x] minor[%x]\n", + vp->major, vp->minor); + + if (lp->hs_state == LDC_HS_GOTVERS) { + if (lp->ver.major != vp->major || + lp->ver.minor != vp->minor) + return ldc_abort(lp); + } else { + lp->ver = *vp; + lp->hs_state = LDC_HS_GOTVERS; + } + if (send_rts(lp)) + return ldc_abort(lp); + return 0; +} + +static int process_ver_nack(struct ldc_channel *lp, struct ldc_version *vp) +{ + struct ldc_version *vap; + + if ((vp->major == 0 && vp->minor == 0) || + !(vap = find_by_major(vp->major))) { + return ldc_abort(lp); + } else { + struct ldc_packet *p; + unsigned long new_tail; + + p = handshake_compose_ctrl(lp, LDC_INFO, LDC_VERS, + vap, sizeof(*vap), + &new_tail); + if (p) + return send_tx_packet(lp, p, new_tail); + else + return ldc_abort(lp); + } +} + +static int process_version(struct ldc_channel *lp, + struct ldc_packet *p) +{ + struct ldc_version *vp; + + vp = (struct ldc_version *) p->u.u_data; + + switch (p->stype) { + case LDC_INFO: + return process_ver_info(lp, vp); + + case LDC_ACK: + return process_ver_ack(lp, vp); + + case LDC_NACK: + return process_ver_nack(lp, vp); + + default: + return ldc_abort(lp); + } +} + +static int process_rts(struct ldc_channel *lp, + struct ldc_packet *p) +{ + ldcdbg(HS, "GOT RTS stype[%x] seqid[%x] env[%x]\n", + p->stype, p->seqid, p->env); + + if (p->stype != LDC_INFO || + lp->hs_state != LDC_HS_GOTVERS || + p->env != lp->cfg.mode) + return ldc_abort(lp); + + lp->snd_nxt = p->seqid; + lp->rcv_nxt = p->seqid; + lp->hs_state = LDC_HS_SENTRTR; + if (send_rtr(lp)) + return ldc_abort(lp); + + return 0; +} + +static int process_rtr(struct ldc_channel *lp, + struct ldc_packet *p) +{ + ldcdbg(HS, "GOT RTR stype[%x] seqid[%x] env[%x]\n", + p->stype, p->seqid, p->env); + + if (p->stype != LDC_INFO || + p->env != lp->cfg.mode) + return ldc_abort(lp); + + lp->snd_nxt = p->seqid; + lp->hs_state = LDC_HS_COMPLETE; + ldc_set_state(lp, LDC_STATE_CONNECTED); + send_rdx(lp); + + return LDC_EVENT_UP; +} + +static int rx_seq_ok(struct ldc_channel *lp, u32 seqid) +{ + return lp->rcv_nxt + 1 == seqid; +} + +static int process_rdx(struct ldc_channel *lp, + struct ldc_packet *p) +{ + ldcdbg(HS, "GOT RDX stype[%x] seqid[%x] env[%x] ackid[%x]\n", + p->stype, p->seqid, p->env, p->u.r.ackid); + + if (p->stype != LDC_INFO || + !(rx_seq_ok(lp, p->seqid))) + return ldc_abort(lp); + + lp->rcv_nxt = p->seqid; + + lp->hs_state = LDC_HS_COMPLETE; + ldc_set_state(lp, LDC_STATE_CONNECTED); + + return LDC_EVENT_UP; +} + +static int process_control_frame(struct ldc_channel *lp, + struct ldc_packet *p) +{ + switch (p->ctrl) { + case LDC_VERS: + return process_version(lp, p); + + case LDC_RTS: + return process_rts(lp, p); + + case LDC_RTR: + return process_rtr(lp, p); + + case LDC_RDX: + return process_rdx(lp, p); + + default: + return ldc_abort(lp); + } +} + +static int process_error_frame(struct ldc_channel *lp, + struct ldc_packet *p) +{ + return ldc_abort(lp); +} + +static int process_data_ack(struct ldc_channel *lp, + struct ldc_packet *ack) +{ + unsigned long head = lp->tx_acked; + u32 ackid = ack->u.r.ackid; + + while (1) { + struct ldc_packet *p = lp->tx_base + (head / LDC_PACKET_SIZE); + + head = tx_advance(lp, head); + + if (p->seqid == ackid) { + lp->tx_acked = head; + return 0; + } + if (head == lp->tx_tail) + return ldc_abort(lp); + } + + return 0; +} + +static void send_events(struct ldc_channel *lp, unsigned int event_mask) +{ + if (event_mask & LDC_EVENT_RESET) + lp->cfg.event(lp->event_arg, LDC_EVENT_RESET); + if (event_mask & LDC_EVENT_UP) + lp->cfg.event(lp->event_arg, LDC_EVENT_UP); + if (event_mask & LDC_EVENT_DATA_READY) + lp->cfg.event(lp->event_arg, LDC_EVENT_DATA_READY); +} + +static irqreturn_t ldc_rx(int irq, void *dev_id) +{ + struct ldc_channel *lp = dev_id; + unsigned long orig_state, hv_err, flags; + unsigned int event_mask; + + spin_lock_irqsave(&lp->lock, flags); + + orig_state = lp->chan_state; + hv_err = sun4v_ldc_rx_get_state(lp->id, + &lp->rx_head, + &lp->rx_tail, + &lp->chan_state); + + ldcdbg(RX, "RX state[0x%02lx:0x%02lx] head[0x%04lx] tail[0x%04lx]\n", + orig_state, lp->chan_state, lp->rx_head, lp->rx_tail); + + event_mask = 0; + + if (lp->cfg.mode == LDC_MODE_RAW && + lp->chan_state == LDC_CHANNEL_UP) { + lp->hs_state = LDC_HS_COMPLETE; + ldc_set_state(lp, LDC_STATE_CONNECTED); + + event_mask |= LDC_EVENT_UP; + + orig_state = lp->chan_state; + } + + /* If we are in reset state, flush the RX queue and ignore + * everything. + */ + if (lp->flags & LDC_FLAG_RESET) { + (void) __set_rx_head(lp, lp->rx_tail); + goto out; + } + + /* Once we finish the handshake, we let the ldc_read() + * paths do all of the control frame and state management. + * Just trigger the callback. + */ + if (lp->hs_state == LDC_HS_COMPLETE) { +handshake_complete: + if (lp->chan_state != orig_state) { + unsigned int event = LDC_EVENT_RESET; + + if (lp->chan_state == LDC_CHANNEL_UP) + event = LDC_EVENT_UP; + + event_mask |= event; + } + if (lp->rx_head != lp->rx_tail) + event_mask |= LDC_EVENT_DATA_READY; + + goto out; + } + + if (lp->chan_state != orig_state) + goto out; + + while (lp->rx_head != lp->rx_tail) { + struct ldc_packet *p; + unsigned long new; + int err; + + p = lp->rx_base + (lp->rx_head / LDC_PACKET_SIZE); + + switch (p->type) { + case LDC_CTRL: + err = process_control_frame(lp, p); + if (err > 0) + event_mask |= err; + break; + + case LDC_DATA: + event_mask |= LDC_EVENT_DATA_READY; + err = 0; + break; + + case LDC_ERR: + err = process_error_frame(lp, p); + break; + + default: + err = ldc_abort(lp); + break; + } + + if (err < 0) + break; + + new = lp->rx_head; + new += LDC_PACKET_SIZE; + if (new == (lp->rx_num_entries * LDC_PACKET_SIZE)) + new = 0; + lp->rx_head = new; + + err = __set_rx_head(lp, new); + if (err < 0) { + (void) ldc_abort(lp); + break; + } + if (lp->hs_state == LDC_HS_COMPLETE) + goto handshake_complete; + } + +out: + spin_unlock_irqrestore(&lp->lock, flags); + + send_events(lp, event_mask); + + return IRQ_HANDLED; +} + +static irqreturn_t ldc_tx(int irq, void *dev_id) +{ + struct ldc_channel *lp = dev_id; + unsigned long flags, hv_err, orig_state; + unsigned int event_mask = 0; + + spin_lock_irqsave(&lp->lock, flags); + + orig_state = lp->chan_state; + hv_err = sun4v_ldc_tx_get_state(lp->id, + &lp->tx_head, + &lp->tx_tail, + &lp->chan_state); + + ldcdbg(TX, " TX state[0x%02lx:0x%02lx] head[0x%04lx] tail[0x%04lx]\n", + orig_state, lp->chan_state, lp->tx_head, lp->tx_tail); + + if (lp->cfg.mode == LDC_MODE_RAW && + lp->chan_state == LDC_CHANNEL_UP) { + lp->hs_state = LDC_HS_COMPLETE; + ldc_set_state(lp, LDC_STATE_CONNECTED); + + event_mask |= LDC_EVENT_UP; + } + + spin_unlock_irqrestore(&lp->lock, flags); + + send_events(lp, event_mask); + + return IRQ_HANDLED; +} + +/* XXX ldc_alloc() and ldc_free() needs to run under a mutex so + * XXX that addition and removal from the ldc_channel_list has + * XXX atomicity, otherwise the __ldc_channel_exists() check is + * XXX totally pointless as another thread can slip into ldc_alloc() + * XXX and add a channel with the same ID. There also needs to be + * XXX a spinlock for ldc_channel_list. + */ +static HLIST_HEAD(ldc_channel_list); + +static int __ldc_channel_exists(unsigned long id) +{ + struct ldc_channel *lp; + struct hlist_node *n; + + hlist_for_each_entry(lp, n, &ldc_channel_list, list) { + if (lp->id == id) + return 1; + } + return 0; +} + +static int alloc_queue(const char *name, unsigned long num_entries, + struct ldc_packet **base, unsigned long *ra) +{ + unsigned long size, order; + void *q; + + size = num_entries * LDC_PACKET_SIZE; + order = get_order(size); + + q = (void *) __get_free_pages(GFP_KERNEL, order); + if (!q) { + printk(KERN_ERR PFX "Alloc of %s queue failed with " + "size=%lu order=%lu\n", name, size, order); + return -ENOMEM; + } + + memset(q, 0, PAGE_SIZE << order); + + *base = q; + *ra = __pa(q); + + return 0; +} + +static void free_queue(unsigned long num_entries, struct ldc_packet *q) +{ + unsigned long size, order; + + if (!q) + return; + + size = num_entries * LDC_PACKET_SIZE; + order = get_order(size); + + free_pages((unsigned long)q, order); +} + +/* XXX Make this configurable... XXX */ +#define LDC_IOTABLE_SIZE (8 * 1024) + +static int ldc_iommu_init(struct ldc_channel *lp) +{ + unsigned long sz, num_tsb_entries, tsbsize, order; + struct ldc_iommu *iommu = &lp->iommu; + struct ldc_mtable_entry *table; + unsigned long hv_err; + int err; + + num_tsb_entries = LDC_IOTABLE_SIZE; + tsbsize = num_tsb_entries * sizeof(struct ldc_mtable_entry); + + spin_lock_init(&iommu->lock); + + sz = num_tsb_entries / 8; + sz = (sz + 7UL) & ~7UL; + iommu->arena.map = kzalloc(sz, GFP_KERNEL); + if (!iommu->arena.map) { + printk(KERN_ERR PFX "Alloc of arena map failed, sz=%lu\n", sz); + return -ENOMEM; + } + + iommu->arena.limit = num_tsb_entries; + + order = get_order(tsbsize); + + table = (struct ldc_mtable_entry *) + __get_free_pages(GFP_KERNEL, order); + err = -ENOMEM; + if (!table) { + printk(KERN_ERR PFX "Alloc of MTE table failed, " + "size=%lu order=%lu\n", tsbsize, order); + goto out_free_map; + } + + memset(table, 0, PAGE_SIZE << order); + + iommu->page_table = table; + + hv_err = sun4v_ldc_set_map_table(lp->id, __pa(table), + num_tsb_entries); + err = -EINVAL; + if (hv_err) + goto out_free_table; + + return 0; + +out_free_table: + free_pages((unsigned long) table, order); + iommu->page_table = NULL; + +out_free_map: + kfree(iommu->arena.map); + iommu->arena.map = NULL; + + return err; +} + +static void ldc_iommu_release(struct ldc_channel *lp) +{ + struct ldc_iommu *iommu = &lp->iommu; + unsigned long num_tsb_entries, tsbsize, order; + + (void) sun4v_ldc_set_map_table(lp->id, 0, 0); + + num_tsb_entries = iommu->arena.limit; + tsbsize = num_tsb_entries * sizeof(struct ldc_mtable_entry); + order = get_order(tsbsize); + + free_pages((unsigned long) iommu->page_table, order); + iommu->page_table = NULL; + + kfree(iommu->arena.map); + iommu->arena.map = NULL; +} + +struct ldc_channel *ldc_alloc(unsigned long id, + const struct ldc_channel_config *cfgp, + void *event_arg) +{ + struct ldc_channel *lp; + const struct ldc_mode_ops *mops; + unsigned long dummy1, dummy2, hv_err; + u8 mss, *mssbuf; + int err; + + err = -ENODEV; + if (!ldom_domaining_enabled) + goto out_err; + + err = -EINVAL; + if (!cfgp) + goto out_err; + + switch (cfgp->mode) { + case LDC_MODE_RAW: + mops = &raw_ops; + mss = LDC_PACKET_SIZE; + break; + + case LDC_MODE_UNRELIABLE: + mops = &nonraw_ops; + mss = LDC_PACKET_SIZE - 8; + break; + + case LDC_MODE_STREAM: + mops = &stream_ops; + mss = LDC_PACKET_SIZE - 8 - 8; + break; + + default: + goto out_err; + } + + if (!cfgp->event || !event_arg || !cfgp->rx_irq || !cfgp->tx_irq) + goto out_err; + + hv_err = sun4v_ldc_tx_qinfo(id, &dummy1, &dummy2); + err = -ENODEV; + if (hv_err == HV_ECHANNEL) + goto out_err; + + err = -EEXIST; + if (__ldc_channel_exists(id)) + goto out_err; + + mssbuf = NULL; + + lp = kzalloc(sizeof(*lp), GFP_KERNEL); + err = -ENOMEM; + if (!lp) + goto out_err; + + spin_lock_init(&lp->lock); + + lp->id = id; + + err = ldc_iommu_init(lp); + if (err) + goto out_free_ldc; + + lp->mops = mops; + lp->mss = mss; + + lp->cfg = *cfgp; + if (!lp->cfg.mtu) + lp->cfg.mtu = LDC_DEFAULT_MTU; + + if (lp->cfg.mode == LDC_MODE_STREAM) { + mssbuf = kzalloc(lp->cfg.mtu, GFP_KERNEL); + if (!mssbuf) { + err = -ENOMEM; + goto out_free_iommu; + } + lp->mssbuf = mssbuf; + } + + lp->event_arg = event_arg; + + /* XXX allow setting via ldc_channel_config to override defaults + * XXX or use some formula based upon mtu + */ + lp->tx_num_entries = LDC_DEFAULT_NUM_ENTRIES; + lp->rx_num_entries = LDC_DEFAULT_NUM_ENTRIES; + + err = alloc_queue("TX", lp->tx_num_entries, + &lp->tx_base, &lp->tx_ra); + if (err) + goto out_free_mssbuf; + + err = alloc_queue("RX", lp->rx_num_entries, + &lp->rx_base, &lp->rx_ra); + if (err) + goto out_free_txq; + + lp->flags |= LDC_FLAG_ALLOCED_QUEUES; + + lp->hs_state = LDC_HS_CLOSED; + ldc_set_state(lp, LDC_STATE_INIT); + + INIT_HLIST_NODE(&lp->list); + hlist_add_head(&lp->list, &ldc_channel_list); + + INIT_HLIST_HEAD(&lp->mh_list); + + return lp; + +out_free_txq: + free_queue(lp->tx_num_entries, lp->tx_base); + +out_free_mssbuf: + if (mssbuf) + kfree(mssbuf); + +out_free_iommu: + ldc_iommu_release(lp); + +out_free_ldc: + kfree(lp); + +out_err: + return ERR_PTR(err); +} +EXPORT_SYMBOL(ldc_alloc); + +void ldc_free(struct ldc_channel *lp) +{ + if (lp->flags & LDC_FLAG_REGISTERED_IRQS) { + free_irq(lp->cfg.rx_irq, lp); + free_irq(lp->cfg.tx_irq, lp); + } + + if (lp->flags & LDC_FLAG_REGISTERED_QUEUES) { + sun4v_ldc_tx_qconf(lp->id, 0, 0); + sun4v_ldc_rx_qconf(lp->id, 0, 0); + lp->flags &= ~LDC_FLAG_REGISTERED_QUEUES; + } + if (lp->flags & LDC_FLAG_ALLOCED_QUEUES) { + free_queue(lp->tx_num_entries, lp->tx_base); + free_queue(lp->rx_num_entries, lp->rx_base); + lp->flags &= ~LDC_FLAG_ALLOCED_QUEUES; + } + + hlist_del(&lp->list); + + if (lp->mssbuf) + kfree(lp->mssbuf); + + ldc_iommu_release(lp); + + kfree(lp); +} +EXPORT_SYMBOL(ldc_free); + +/* Bind the channel. This registers the LDC queues with + * the hypervisor and puts the channel into a pseudo-listening + * state. This does not initiate a handshake, ldc_connect() does + * that. + */ +int ldc_bind(struct ldc_channel *lp, const char *name) +{ + unsigned long hv_err, flags; + int err = -EINVAL; + + spin_lock_irqsave(&lp->lock, flags); + + if (!name) + goto out_err; + + if (lp->state != LDC_STATE_INIT) + goto out_err; + + snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name); + snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name); + + err = request_irq(lp->cfg.rx_irq, ldc_rx, + IRQF_SAMPLE_RANDOM | IRQF_SHARED, + lp->rx_irq_name, lp); + if (err) + goto out_err; + + err = request_irq(lp->cfg.tx_irq, ldc_tx, + IRQF_SAMPLE_RANDOM | IRQF_SHARED, + lp->tx_irq_name, lp); + if (err) + goto out_free_rx_irq; + + + lp->flags |= LDC_FLAG_REGISTERED_IRQS; + + err = -ENODEV; + hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0); + if (hv_err) + goto out_free_tx_irq; + + hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries); + if (hv_err) + goto out_free_tx_irq; + + hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0); + if (hv_err) + goto out_unmap_tx; + + hv_err = sun4v_ldc_rx_qconf(lp->id, lp->rx_ra, lp->rx_num_entries); + if (hv_err) + goto out_unmap_tx; + + lp->flags |= LDC_FLAG_REGISTERED_QUEUES; + + hv_err = sun4v_ldc_tx_get_state(lp->id, + &lp->tx_head, + &lp->tx_tail, + &lp->chan_state); + err = -EBUSY; + if (hv_err) + goto out_unmap_rx; + + lp->tx_acked = lp->tx_head; + + lp->hs_state = LDC_HS_OPEN; + ldc_set_state(lp, LDC_STATE_BOUND); + + spin_unlock_irqrestore(&lp->lock, flags); + + return 0; + +out_unmap_rx: + lp->flags &= ~LDC_FLAG_REGISTERED_QUEUES; + sun4v_ldc_rx_qconf(lp->id, 0, 0); + +out_unmap_tx: + sun4v_ldc_tx_qconf(lp->id, 0, 0); + +out_free_tx_irq: + lp->flags &= ~LDC_FLAG_REGISTERED_IRQS; + free_irq(lp->cfg.tx_irq, lp); + +out_free_rx_irq: + free_irq(lp->cfg.rx_irq, lp); + +out_err: + spin_unlock_irqrestore(&lp->lock, flags); + + return err; +} +EXPORT_SYMBOL(ldc_bind); + +int ldc_connect(struct ldc_channel *lp) +{ + unsigned long flags; + int err; + + if (lp->cfg.mode == LDC_MODE_RAW) + return -EINVAL; + + spin_lock_irqsave(&lp->lock, flags); + + if (!(lp->flags & LDC_FLAG_ALLOCED_QUEUES) || + !(lp->flags & LDC_FLAG_REGISTERED_QUEUES) || + lp->hs_state != LDC_HS_OPEN) + err = -EINVAL; + else + err = start_handshake(lp); + + spin_unlock_irqrestore(&lp->lock, flags); + + return err; +} +EXPORT_SYMBOL(ldc_connect); + +int ldc_disconnect(struct ldc_channel *lp) +{ + unsigned long hv_err, flags; + int err; + + if (lp->cfg.mode == LDC_MODE_RAW) + return -EINVAL; + + if (!(lp->flags & LDC_FLAG_ALLOCED_QUEUES) || + !(lp->flags & LDC_FLAG_REGISTERED_QUEUES)) + return -EINVAL; + + spin_lock_irqsave(&lp->lock, flags); + + err = -ENODEV; + hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0); + if (hv_err) + goto out_err; + + hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries); + if (hv_err) + goto out_err; + + hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0); + if (hv_err) + goto out_err; + + hv_err = sun4v_ldc_rx_qconf(lp->id, lp->rx_ra, lp->rx_num_entries); + if (hv_err) + goto out_err; + + ldc_set_state(lp, LDC_STATE_BOUND); + lp->hs_state = LDC_HS_OPEN; + lp->flags |= LDC_FLAG_RESET; + + spin_unlock_irqrestore(&lp->lock, flags); + + return 0; + +out_err: + sun4v_ldc_tx_qconf(lp->id, 0, 0); + sun4v_ldc_rx_qconf(lp->id, 0, 0); + free_irq(lp->cfg.tx_irq, lp); + free_irq(lp->cfg.rx_irq, lp); + lp->flags &= ~(LDC_FLAG_REGISTERED_IRQS | + LDC_FLAG_REGISTERED_QUEUES); + ldc_set_state(lp, LDC_STATE_INIT); + + spin_unlock_irqrestore(&lp->lock, flags); + + return err; +} +EXPORT_SYMBOL(ldc_disconnect); + +int ldc_state(struct ldc_channel *lp) +{ + return lp->state; +} +EXPORT_SYMBOL(ldc_state); + +static int write_raw(struct ldc_channel *lp, const void *buf, unsigned int size) +{ + struct ldc_packet *p; + unsigned long new_tail; + int err; + + if (size > LDC_PACKET_SIZE) + return -EMSGSIZE; + + p = data_get_tx_packet(lp, &new_tail); + if (!p) + return -EAGAIN; + + memcpy(p, buf, size); + + err = send_tx_packet(lp, p, new_tail); + if (!err) + err = size; + + return err; +} + +static int read_raw(struct ldc_channel *lp, void *buf, unsigned int size) +{ + struct ldc_packet *p; + unsigned long hv_err, new; + int err; + + if (size < LDC_PACKET_SIZE) + return -EINVAL; + + hv_err = sun4v_ldc_rx_get_state(lp->id, + &lp->rx_head, + &lp->rx_tail, + &lp->chan_state); + if (hv_err) + return ldc_abort(lp); + + if (lp->chan_state == LDC_CHANNEL_DOWN || + lp->chan_state == LDC_CHANNEL_RESETTING) + return -ECONNRESET; + + if (lp->rx_head == lp->rx_tail) + return 0; + + p = lp->rx_base + (lp->rx_head / LDC_PACKET_SIZE); + memcpy(buf, p, LDC_PACKET_SIZE); + + new = rx_advance(lp, lp->rx_head); + lp->rx_head = new; + + err = __set_rx_head(lp, new); + if (err < 0) + err = -ECONNRESET; + else + err = LDC_PACKET_SIZE; + + return err; +} + +static const struct ldc_mode_ops raw_ops = { + .write = write_raw, + .read = read_raw, +}; + +static int write_nonraw(struct ldc_channel *lp, const void *buf, + unsigned int size) +{ + unsigned long hv_err, tail; + unsigned int copied; + u32 seq; + int err; + + hv_err = sun4v_ldc_tx_get_state(lp->id, &lp->tx_head, &lp->tx_tail, + &lp->chan_state); + if (unlikely(hv_err)) + return -EBUSY; + + if (unlikely(lp->chan_state != LDC_CHANNEL_UP)) + return ldc_abort(lp); + + if (!tx_has_space_for(lp, size)) + return -EAGAIN; + + seq = lp->snd_nxt; + copied = 0; + tail = lp->tx_tail; + while (copied < size) { + struct ldc_packet *p = lp->tx_base + (tail / LDC_PACKET_SIZE); + u8 *data = ((lp->cfg.mode == LDC_MODE_UNRELIABLE) ? + p->u.u_data : + p->u.r.r_data); + int data_len; + + p->type = LDC_DATA; + p->stype = LDC_INFO; + p->ctrl = 0; + + data_len = size - copied; + if (data_len > lp->mss) + data_len = lp->mss; + + BUG_ON(data_len > LDC_LEN); + + p->env = (data_len | + (copied == 0 ? LDC_START : 0) | + (data_len == size - copied ? LDC_STOP : 0)); + + p->seqid = ++seq; + + ldcdbg(DATA, "SENT DATA [%02x:%02x:%02x:%02x:%08x]\n", + p->type, + p->stype, + p->ctrl, + p->env, + p->seqid); + + memcpy(data, buf, data_len); + buf += data_len; + copied += data_len; + + tail = tx_advance(lp, tail); + } + + err = set_tx_tail(lp, tail); + if (!err) { + lp->snd_nxt = seq; + err = size; + } + + return err; +} + +static int rx_bad_seq(struct ldc_channel *lp, struct ldc_packet *p, + struct ldc_packet *first_frag) +{ + int err; + + if (first_frag) + lp->rcv_nxt = first_frag->seqid - 1; + + err = send_data_nack(lp, p); + if (err) + return err; + + err = __set_rx_head(lp, lp->rx_tail); + if (err < 0) + return ldc_abort(lp); + + return 0; +} + +static int data_ack_nack(struct ldc_channel *lp, struct ldc_packet *p) +{ + if (p->stype & LDC_ACK) { + int err = process_data_ack(lp, p); + if (err) + return err; + } + if (p->stype & LDC_NACK) + return ldc_abort(lp); + + return 0; +} + +static int rx_data_wait(struct ldc_channel *lp, unsigned long cur_head) +{ + unsigned long dummy; + int limit = 1000; + + ldcdbg(DATA, "DATA WAIT cur_head[%lx] rx_head[%lx] rx_tail[%lx]\n", + cur_head, lp->rx_head, lp->rx_tail); + while (limit-- > 0) { + unsigned long hv_err; + + hv_err = sun4v_ldc_rx_get_state(lp->id, + &dummy, + &lp->rx_tail, + &lp->chan_state); + if (hv_err) + return ldc_abort(lp); + + if (lp->chan_state == LDC_CHANNEL_DOWN || + lp->chan_state == LDC_CHANNEL_RESETTING) + return -ECONNRESET; + + if (cur_head != lp->rx_tail) { + ldcdbg(DATA, "DATA WAIT DONE " + "head[%lx] tail[%lx] chan_state[%lx]\n", + dummy, lp->rx_tail, lp->chan_state); + return 0; + } + + udelay(1); + } + return -EAGAIN; +} + +static int rx_set_head(struct ldc_channel *lp, unsigned long head) +{ + int err = __set_rx_head(lp, head); + + if (err < 0) + return ldc_abort(lp); + + lp->rx_head = head; + return 0; +} + +static void send_data_ack(struct ldc_channel *lp) +{ + unsigned long new_tail; + struct ldc_packet *p; + + p = data_get_tx_packet(lp, &new_tail); + if (likely(p)) { + int err; + + memset(p, 0, sizeof(*p)); + p->type = LDC_DATA; + p->stype = LDC_ACK; + p->ctrl = 0; + p->seqid = lp->snd_nxt + 1; + p->u.r.ackid = lp->rcv_nxt; + + err = send_tx_packet(lp, p, new_tail); + if (!err) + lp->snd_nxt++; + } +} + +static int read_nonraw(struct ldc_channel *lp, void *buf, unsigned int size) +{ + struct ldc_packet *first_frag; + unsigned long hv_err, new; + int err, copied; + + hv_err = sun4v_ldc_rx_get_state(lp->id, + &lp->rx_head, + &lp->rx_tail, + &lp->chan_state); + if (hv_err) + return ldc_abort(lp); + + if (lp->chan_state == LDC_CHANNEL_DOWN || + lp->chan_state == LDC_CHANNEL_RESETTING) + return -ECONNRESET; + + if (lp->rx_head == lp->rx_tail) + return 0; + + first_frag = NULL; + copied = err = 0; + new = lp->rx_head; + while (1) { + struct ldc_packet *p; + int pkt_len; + + BUG_ON(new == lp->rx_tail); + p = lp->rx_base + (new / LDC_PACKET_SIZE); + + ldcdbg(RX, "RX read pkt[%02x:%02x:%02x:%02x:%08x:%08x] " + "rcv_nxt[%08x]\n", + p->type, + p->stype, + p->ctrl, + p->env, + p->seqid, + p->u.r.ackid, + lp->rcv_nxt); + + if (unlikely(!rx_seq_ok(lp, p->seqid))) { + err = rx_bad_seq(lp, p, first_frag); + copied = 0; + break; + } + + if (p->type & LDC_CTRL) { + err = process_control_frame(lp, p); + if (err < 0) + break; + err = 0; + } + + lp->rcv_nxt = p->seqid; + + if (!(p->type & LDC_DATA)) { + new = rx_advance(lp, new); + goto no_data; + } + if (p->stype & (LDC_ACK | LDC_NACK)) { + err = data_ack_nack(lp, p); + if (err) + break; + } + if (!(p->stype & LDC_INFO)) { + new = rx_advance(lp, new); + err = rx_set_head(lp, new); + if (err) + break; + goto no_data; + } + + pkt_len = p->env & LDC_LEN; + + /* Every initial packet starts with the START bit set. + * + * Singleton packets will have both START+STOP set. + * + * Fragments will have START set in the first frame, STOP + * set in the last frame, and neither bit set in middle + * frames of the packet. + * + * Therefore if we are at the beginning of a packet and + * we don't see START, or we are in the middle of a fragmented + * packet and do see START, we are unsynchronized and should + * flush the RX queue. + */ + if ((first_frag == NULL && !(p->env & LDC_START)) || + (first_frag != NULL && (p->env & LDC_START))) { + if (!first_frag) + new = rx_advance(lp, new); + + err = rx_set_head(lp, new); + if (err) + break; + + if (!first_frag) + goto no_data; + } + if (!first_frag) + first_frag = p; + + if (pkt_len > size - copied) { + /* User didn't give us a big enough buffer, + * what to do? This is a pretty serious error. + * + * Since we haven't updated the RX ring head to + * consume any of the packets, signal the error + * to the user and just leave the RX ring alone. + * + * This seems the best behavior because this allows + * a user of the LDC layer to start with a small + * RX buffer for ldc_read() calls and use -EMSGSIZE + * as a cue to enlarge it's read buffer. + */ + err = -EMSGSIZE; + break; + } + + /* Ok, we are gonna eat this one. */ + new = rx_advance(lp, new); + + memcpy(buf, + (lp->cfg.mode == LDC_MODE_UNRELIABLE ? + p->u.u_data : p->u.r.r_data), pkt_len); + buf += pkt_len; + copied += pkt_len; + + if (p->env & LDC_STOP) + break; + +no_data: + if (new == lp->rx_tail) { + err = rx_data_wait(lp, new); + if (err) + break; + } + } + + if (!err) + err = rx_set_head(lp, new); + + if (err && first_frag) + lp->rcv_nxt = first_frag->seqid - 1; + + if (!err) { + err = copied; + if (err > 0 && lp->cfg.mode != LDC_MODE_UNRELIABLE) + send_data_ack(lp); + } + + return err; +} + +static const struct ldc_mode_ops nonraw_ops = { + .write = write_nonraw, + .read = read_nonraw, +}; + +static int write_stream(struct ldc_channel *lp, const void *buf, + unsigned int size) +{ + if (size > lp->cfg.mtu) + size = lp->cfg.mtu; + return write_nonraw(lp, buf, size); +} + +static int read_stream(struct ldc_channel *lp, void *buf, unsigned int size) +{ + if (!lp->mssbuf_len) { + int err = read_nonraw(lp, lp->mssbuf, lp->cfg.mtu); + if (err < 0) + return err; + + lp->mssbuf_len = err; + lp->mssbuf_off = 0; + } + + if (size > lp->mssbuf_len) + size = lp->mssbuf_len; + memcpy(buf, lp->mssbuf + lp->mssbuf_off, size); + + lp->mssbuf_off += size; + lp->mssbuf_len -= size; + + return size; +} + +static const struct ldc_mode_ops stream_ops = { + .write = write_stream, + .read = read_stream, +}; + +int ldc_write(struct ldc_channel *lp, const void *buf, unsigned int size) +{ + unsigned long flags; + int err; + + if (!buf) + return -EINVAL; + + if (!size) + return 0; + + spin_lock_irqsave(&lp->lock, flags); + + if (lp->hs_state != LDC_HS_COMPLETE) + err = -ENOTCONN; + else + err = lp->mops->write(lp, buf, size); + + spin_unlock_irqrestore(&lp->lock, flags); + + return err; +} +EXPORT_SYMBOL(ldc_write); + +int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size) +{ + unsigned long flags; + int err; + + if (!buf) + return -EINVAL; + + if (!size) + return 0; + + spin_lock_irqsave(&lp->lock, flags); + + if (lp->hs_state != LDC_HS_COMPLETE) + err = -ENOTCONN; + else + err = lp->mops->read(lp, buf, size); + + spin_unlock_irqrestore(&lp->lock, flags); + + return err; +} +EXPORT_SYMBOL(ldc_read); + +static long arena_alloc(struct ldc_iommu *iommu, unsigned long npages) +{ + struct iommu_arena *arena = &iommu->arena; + unsigned long n, i, start, end, limit; + int pass; + + limit = arena->limit; + start = arena->hint; + pass = 0; + +again: + n = find_next_zero_bit(arena->map, limit, start); + end = n + npages; + if (unlikely(end >= limit)) { + if (likely(pass < 1)) { + limit = start; + start = 0; + pass++; + goto again; + } else { + /* Scanned the whole thing, give up. */ + return -1; + } + } + + for (i = n; i < end; i++) { + if (test_bit(i, arena->map)) { + start = i + 1; + goto again; + } + } + + for (i = n; i < end; i++) + __set_bit(i, arena->map); + + arena->hint = end; + + return n; +} + +#define COOKIE_PGSZ_CODE 0xf000000000000000ULL +#define COOKIE_PGSZ_CODE_SHIFT 60ULL + +static u64 pagesize_code(void) +{ + switch (PAGE_SIZE) { + default: + case (8ULL * 1024ULL): + return 0; + case (64ULL * 1024ULL): + return 1; + case (512ULL * 1024ULL): + return 2; + case (4ULL * 1024ULL * 1024ULL): + return 3; + case (32ULL * 1024ULL * 1024ULL): + return 4; + case (256ULL * 1024ULL * 1024ULL): + return 5; + } +} + +static u64 make_cookie(u64 index, u64 pgsz_code, u64 page_offset) +{ + return ((pgsz_code << COOKIE_PGSZ_CODE_SHIFT) | + (index << PAGE_SHIFT) | + page_offset); +} + +static u64 cookie_to_index(u64 cookie, unsigned long *shift) +{ + u64 szcode = cookie >> COOKIE_PGSZ_CODE_SHIFT; + + cookie &= ~COOKIE_PGSZ_CODE; + + *shift = szcode * 3; + + return (cookie >> (13ULL + (szcode * 3ULL))); +} + +static struct ldc_mtable_entry *alloc_npages(struct ldc_iommu *iommu, + unsigned long npages) +{ + long entry; + + entry = arena_alloc(iommu, npages); + if (unlikely(entry < 0)) + return NULL; + + return iommu->page_table + entry; +} + +static u64 perm_to_mte(unsigned int map_perm) +{ + u64 mte_base; + + mte_base = pagesize_code(); + + if (map_perm & LDC_MAP_SHADOW) { + if (map_perm & LDC_MAP_R) + mte_base |= LDC_MTE_COPY_R; + if (map_perm & LDC_MAP_W) + mte_base |= LDC_MTE_COPY_W; + } + if (map_perm & LDC_MAP_DIRECT) { + if (map_perm & LDC_MAP_R) + mte_base |= LDC_MTE_READ; + if (map_perm & LDC_MAP_W) + mte_base |= LDC_MTE_WRITE; + if (map_perm & LDC_MAP_X) + mte_base |= LDC_MTE_EXEC; + } + if (map_perm & LDC_MAP_IO) { + if (map_perm & LDC_MAP_R) + mte_base |= LDC_MTE_IOMMU_R; + if (map_perm & LDC_MAP_W) + mte_base |= LDC_MTE_IOMMU_W; + } + + return mte_base; +} + +static int pages_in_region(unsigned long base, long len) +{ + int count = 0; + + do { + unsigned long new = (base + PAGE_SIZE) & PAGE_MASK; + + len -= (new - base); + base = new; + count++; + } while (len > 0); + + return count; +} + +struct cookie_state { + struct ldc_mtable_entry *page_table; + struct ldc_trans_cookie *cookies; + u64 mte_base; + u64 prev_cookie; + u32 pte_idx; + u32 nc; +}; + +static void fill_cookies(struct cookie_state *sp, unsigned long pa, + unsigned long off, unsigned long len) +{ + do { + unsigned long tlen, new = pa + PAGE_SIZE; + u64 this_cookie; + + sp->page_table[sp->pte_idx].mte = sp->mte_base | pa; + + tlen = PAGE_SIZE; + if (off) + tlen = PAGE_SIZE - off; + if (tlen > len) + tlen = len; + + this_cookie = make_cookie(sp->pte_idx, + pagesize_code(), off); + + off = 0; + + if (this_cookie == sp->prev_cookie) { + sp->cookies[sp->nc - 1].cookie_size += tlen; + } else { + sp->cookies[sp->nc].cookie_addr = this_cookie; + sp->cookies[sp->nc].cookie_size = tlen; + sp->nc++; + } + sp->prev_cookie = this_cookie + tlen; + + sp->pte_idx++; + + len -= tlen; + pa = new; + } while (len > 0); +} + +static int sg_count_one(struct scatterlist *sg) +{ + unsigned long base = page_to_pfn(sg->page) << PAGE_SHIFT; + long len = sg->length; + + if ((sg->offset | len) & (8UL - 1)) + return -EFAULT; + + return pages_in_region(base + sg->offset, len); +} + +static int sg_count_pages(struct scatterlist *sg, int num_sg) +{ + int count; + int i; + + count = 0; + for (i = 0; i < num_sg; i++) { + int err = sg_count_one(sg + i); + if (err < 0) + return err; + count += err; + } + + return count; +} + +int ldc_map_sg(struct ldc_channel *lp, + struct scatterlist *sg, int num_sg, + struct ldc_trans_cookie *cookies, int ncookies, + unsigned int map_perm) +{ + unsigned long i, npages, flags; + struct ldc_mtable_entry *base; + struct cookie_state state; + struct ldc_iommu *iommu; + int err; + + if (map_perm & ~LDC_MAP_ALL) + return -EINVAL; + + err = sg_count_pages(sg, num_sg); + if (err < 0) + return err; + + npages = err; + if (err > ncookies) + return -EMSGSIZE; + + iommu = &lp->iommu; + + spin_lock_irqsave(&iommu->lock, flags); + base = alloc_npages(iommu, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + if (!base) + return -ENOMEM; + + state.page_table = iommu->page_table; + state.cookies = cookies; + state.mte_base = perm_to_mte(map_perm); + state.prev_cookie = ~(u64)0; + state.pte_idx = (base - iommu->page_table); + state.nc = 0; + + for (i = 0; i < num_sg; i++) + fill_cookies(&state, page_to_pfn(sg[i].page) << PAGE_SHIFT, + sg[i].offset, sg[i].length); + + return state.nc; +} +EXPORT_SYMBOL(ldc_map_sg); + +int ldc_map_single(struct ldc_channel *lp, + void *buf, unsigned int len, + struct ldc_trans_cookie *cookies, int ncookies, + unsigned int map_perm) +{ + unsigned long npages, pa, flags; + struct ldc_mtable_entry *base; + struct cookie_state state; + struct ldc_iommu *iommu; + + if ((map_perm & ~LDC_MAP_ALL) || (ncookies < 1)) + return -EINVAL; + + pa = __pa(buf); + if ((pa | len) & (8UL - 1)) + return -EFAULT; + + npages = pages_in_region(pa, len); + + iommu = &lp->iommu; + + spin_lock_irqsave(&iommu->lock, flags); + base = alloc_npages(iommu, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + if (!base) + return -ENOMEM; + + state.page_table = iommu->page_table; + state.cookies = cookies; + state.mte_base = perm_to_mte(map_perm); + state.prev_cookie = ~(u64)0; + state.pte_idx = (base - iommu->page_table); + state.nc = 0; + fill_cookies(&state, (pa & PAGE_MASK), (pa & ~PAGE_MASK), len); + BUG_ON(state.nc != 1); + + return state.nc; +} +EXPORT_SYMBOL(ldc_map_single); + +static void free_npages(unsigned long id, struct ldc_iommu *iommu, + u64 cookie, u64 size) +{ + struct iommu_arena *arena = &iommu->arena; + unsigned long i, shift, index, npages; + struct ldc_mtable_entry *base; + + npages = PAGE_ALIGN(((cookie & ~PAGE_MASK) + size)) >> PAGE_SHIFT; + index = cookie_to_index(cookie, &shift); + base = iommu->page_table + index; + + BUG_ON(index > arena->limit || + (index + npages) > arena->limit); + + for (i = 0; i < npages; i++) { + if (base->cookie) + sun4v_ldc_revoke(id, cookie + (i << shift), + base->cookie); + base->mte = 0; + __clear_bit(index + i, arena->map); + } +} + +void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies, + int ncookies) +{ + struct ldc_iommu *iommu = &lp->iommu; + unsigned long flags; + int i; + + spin_lock_irqsave(&iommu->lock, flags); + for (i = 0; i < ncookies; i++) { + u64 addr = cookies[i].cookie_addr; + u64 size = cookies[i].cookie_size; + + free_npages(lp->id, iommu, addr, size); + } + spin_unlock_irqrestore(&iommu->lock, flags); +} +EXPORT_SYMBOL(ldc_unmap); + +int ldc_copy(struct ldc_channel *lp, int copy_dir, + void *buf, unsigned int len, unsigned long offset, + struct ldc_trans_cookie *cookies, int ncookies) +{ + unsigned int orig_len; + unsigned long ra; + int i; + + if (copy_dir != LDC_COPY_IN && copy_dir != LDC_COPY_OUT) { + printk(KERN_ERR PFX "ldc_copy: ID[%lu] Bad copy_dir[%d]\n", + lp->id, copy_dir); + return -EINVAL; + } + + ra = __pa(buf); + if ((ra | len | offset) & (8UL - 1)) { + printk(KERN_ERR PFX "ldc_copy: ID[%lu] Unaligned buffer " + "ra[%lx] len[%x] offset[%lx]\n", + lp->id, ra, len, offset); + return -EFAULT; + } + + if (lp->hs_state != LDC_HS_COMPLETE || + (lp->flags & LDC_FLAG_RESET)) { + printk(KERN_ERR PFX "ldc_copy: ID[%lu] Link down hs_state[%x] " + "flags[%x]\n", lp->id, lp->hs_state, lp->flags); + return -ECONNRESET; + } + + orig_len = len; + for (i = 0; i < ncookies; i++) { + unsigned long cookie_raddr = cookies[i].cookie_addr; + unsigned long this_len = cookies[i].cookie_size; + unsigned long actual_len; + + if (unlikely(offset)) { + unsigned long this_off = offset; + + if (this_off > this_len) + this_off = this_len; + + offset -= this_off; + this_len -= this_off; + if (!this_len) + continue; + cookie_raddr += this_off; + } + + if (this_len > len) + this_len = len; + + while (1) { + unsigned long hv_err; + + hv_err = sun4v_ldc_copy(lp->id, copy_dir, + cookie_raddr, ra, + this_len, &actual_len); + if (unlikely(hv_err)) { + printk(KERN_ERR PFX "ldc_copy: ID[%lu] " + "HV error %lu\n", + lp->id, hv_err); + if (lp->hs_state != LDC_HS_COMPLETE || + (lp->flags & LDC_FLAG_RESET)) + return -ECONNRESET; + else + return -EFAULT; + } + + cookie_raddr += actual_len; + ra += actual_len; + len -= actual_len; + if (actual_len == this_len) + break; + + this_len -= actual_len; + } + + if (!len) + break; + } + + /* It is caller policy what to do about short copies. + * For example, a networking driver can declare the + * packet a runt and drop it. + */ + + return orig_len - len; +} +EXPORT_SYMBOL(ldc_copy); + +void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len, + struct ldc_trans_cookie *cookies, int *ncookies, + unsigned int map_perm) +{ + void *buf; + int err; + + if (len & (8UL - 1)) + return ERR_PTR(-EINVAL); + + buf = kzalloc(len, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + err = ldc_map_single(lp, buf, len, cookies, *ncookies, map_perm); + if (err < 0) { + kfree(buf); + return ERR_PTR(err); + } + *ncookies = err; + + return buf; +} +EXPORT_SYMBOL(ldc_alloc_exp_dring); + +void ldc_free_exp_dring(struct ldc_channel *lp, void *buf, unsigned int len, + struct ldc_trans_cookie *cookies, int ncookies) +{ + ldc_unmap(lp, cookies, ncookies); + kfree(buf); +} +EXPORT_SYMBOL(ldc_free_exp_dring); + +static int __init ldc_init(void) +{ + unsigned long major, minor; + struct mdesc_handle *hp; + const u64 *v; + u64 mp; + + hp = mdesc_grab(); + if (!hp) + return -ENODEV; + + mp = mdesc_node_by_name(hp, MDESC_NODE_NULL, "platform"); + if (mp == MDESC_NODE_NULL) + return -ENODEV; + + v = mdesc_get_property(hp, mp, "domaining-enabled", NULL); + if (!v) + return -ENODEV; + + major = 1; + minor = 0; + if (sun4v_hvapi_register(HV_GRP_LDOM, major, &minor)) { + printk(KERN_INFO PFX "Could not register LDOM hvapi.\n"); + return -ENODEV; + } + + printk(KERN_INFO "%s", version); + + if (!*v) { + printk(KERN_INFO PFX "Domaining disabled.\n"); + return -ENODEV; + } + ldom_domaining_enabled = 1; + + return 0; +} + +core_initcall(ldc_init); diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c index f0e16045fb16..de5310ffdb48 100644 --- a/arch/sparc64/kernel/mdesc.c +++ b/arch/sparc64/kernel/mdesc.c @@ -6,6 +6,9 @@ #include <linux/types.h> #include <linux/bootmem.h> #include <linux/log2.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/mm.h> #include <asm/hypervisor.h> #include <asm/mdesc.h> @@ -29,7 +32,7 @@ struct mdesc_hdr { u32 node_sz; /* node block size */ u32 name_sz; /* name block size */ u32 data_sz; /* data block size */ -}; +} __attribute__((aligned(16))); struct mdesc_elem { u8 tag; @@ -53,306 +56,396 @@ struct mdesc_elem { } d; }; -static struct mdesc_hdr *main_mdesc; -static struct mdesc_node *allnodes; - -static struct mdesc_node *allnodes_tail; -static unsigned int unique_id; +struct mdesc_mem_ops { + struct mdesc_handle *(*alloc)(unsigned int mdesc_size); + void (*free)(struct mdesc_handle *handle); +}; -static struct mdesc_node **mdesc_hash; -static unsigned int mdesc_hash_size; +struct mdesc_handle { + struct list_head list; + struct mdesc_mem_ops *mops; + void *self_base; + atomic_t refcnt; + unsigned int handle_size; + struct mdesc_hdr mdesc; +}; -static inline unsigned int node_hashfn(u64 node) +static void mdesc_handle_init(struct mdesc_handle *hp, + unsigned int handle_size, + void *base) { - return ((unsigned int) (node ^ (node >> 8) ^ (node >> 16))) - & (mdesc_hash_size - 1); + BUG_ON(((unsigned long)&hp->mdesc) & (16UL - 1)); + + memset(hp, 0, handle_size); + INIT_LIST_HEAD(&hp->list); + hp->self_base = base; + atomic_set(&hp->refcnt, 1); + hp->handle_size = handle_size; } -static inline void hash_node(struct mdesc_node *mp) +static struct mdesc_handle *mdesc_bootmem_alloc(unsigned int mdesc_size) { - struct mdesc_node **head = &mdesc_hash[node_hashfn(mp->node)]; + struct mdesc_handle *hp; + unsigned int handle_size, alloc_size; - mp->hash_next = *head; - *head = mp; + handle_size = (sizeof(struct mdesc_handle) - + sizeof(struct mdesc_hdr) + + mdesc_size); + alloc_size = PAGE_ALIGN(handle_size); - if (allnodes_tail) { - allnodes_tail->allnodes_next = mp; - allnodes_tail = mp; - } else { - allnodes = allnodes_tail = mp; - } + hp = __alloc_bootmem(alloc_size, PAGE_SIZE, 0UL); + if (hp) + mdesc_handle_init(hp, handle_size, hp); + + return hp; } -static struct mdesc_node *find_node(u64 node) +static void mdesc_bootmem_free(struct mdesc_handle *hp) { - struct mdesc_node *mp = mdesc_hash[node_hashfn(node)]; + unsigned int alloc_size, handle_size = hp->handle_size; + unsigned long start, end; - while (mp) { - if (mp->node == node) - return mp; + BUG_ON(atomic_read(&hp->refcnt) != 0); + BUG_ON(!list_empty(&hp->list)); - mp = mp->hash_next; + alloc_size = PAGE_ALIGN(handle_size); + + start = (unsigned long) hp; + end = start + alloc_size; + + while (start < end) { + struct page *p; + + p = virt_to_page(start); + ClearPageReserved(p); + __free_page(p); + start += PAGE_SIZE; } - return NULL; } -struct property *md_find_property(const struct mdesc_node *mp, - const char *name, - int *lenp) +static struct mdesc_mem_ops bootmem_mdesc_memops = { + .alloc = mdesc_bootmem_alloc, + .free = mdesc_bootmem_free, +}; + +static struct mdesc_handle *mdesc_kmalloc(unsigned int mdesc_size) { - struct property *pp; + unsigned int handle_size; + void *base; - for (pp = mp->properties; pp != 0; pp = pp->next) { - if (strcasecmp(pp->name, name) == 0) { - if (lenp) - *lenp = pp->length; - break; - } + handle_size = (sizeof(struct mdesc_handle) - + sizeof(struct mdesc_hdr) + + mdesc_size); + + base = kmalloc(handle_size + 15, GFP_KERNEL); + if (base) { + struct mdesc_handle *hp; + unsigned long addr; + + addr = (unsigned long)base; + addr = (addr + 15UL) & ~15UL; + hp = (struct mdesc_handle *) addr; + + mdesc_handle_init(hp, handle_size, base); + return hp; } - return pp; + + return NULL; } -EXPORT_SYMBOL(md_find_property); -/* - * Find a property with a given name for a given node - * and return the value. - */ -const void *md_get_property(const struct mdesc_node *mp, const char *name, - int *lenp) +static void mdesc_kfree(struct mdesc_handle *hp) { - struct property *pp = md_find_property(mp, name, lenp); - return pp ? pp->value : NULL; + BUG_ON(atomic_read(&hp->refcnt) != 0); + BUG_ON(!list_empty(&hp->list)); + + kfree(hp->self_base); } -EXPORT_SYMBOL(md_get_property); -struct mdesc_node *md_find_node_by_name(struct mdesc_node *from, - const char *name) +static struct mdesc_mem_ops kmalloc_mdesc_memops = { + .alloc = mdesc_kmalloc, + .free = mdesc_kfree, +}; + +static struct mdesc_handle *mdesc_alloc(unsigned int mdesc_size, + struct mdesc_mem_ops *mops) { - struct mdesc_node *mp; + struct mdesc_handle *hp = mops->alloc(mdesc_size); - mp = from ? from->allnodes_next : allnodes; - for (; mp != NULL; mp = mp->allnodes_next) { - if (strcmp(mp->name, name) == 0) - break; - } - return mp; -} -EXPORT_SYMBOL(md_find_node_by_name); + if (hp) + hp->mops = mops; -static unsigned int mdesc_early_allocated; + return hp; +} -static void * __init mdesc_early_alloc(unsigned long size) +static void mdesc_free(struct mdesc_handle *hp) { - void *ret; + hp->mops->free(hp); +} - ret = __alloc_bootmem(size, SMP_CACHE_BYTES, 0UL); - if (ret == NULL) { - prom_printf("MDESC: alloc of %lu bytes failed.\n", size); - prom_halt(); - } +static struct mdesc_handle *cur_mdesc; +static LIST_HEAD(mdesc_zombie_list); +static DEFINE_SPINLOCK(mdesc_lock); - memset(ret, 0, size); +struct mdesc_handle *mdesc_grab(void) +{ + struct mdesc_handle *hp; + unsigned long flags; - mdesc_early_allocated += size; + spin_lock_irqsave(&mdesc_lock, flags); + hp = cur_mdesc; + if (hp) + atomic_inc(&hp->refcnt); + spin_unlock_irqrestore(&mdesc_lock, flags); - return ret; + return hp; } +EXPORT_SYMBOL(mdesc_grab); -static unsigned int __init count_arcs(struct mdesc_elem *ep) +void mdesc_release(struct mdesc_handle *hp) { - unsigned int ret = 0; + unsigned long flags; - ep++; - while (ep->tag != MD_NODE_END) { - if (ep->tag == MD_PROP_ARC) - ret++; - ep++; + spin_lock_irqsave(&mdesc_lock, flags); + if (atomic_dec_and_test(&hp->refcnt)) { + list_del_init(&hp->list); + hp->mops->free(hp); } - return ret; + spin_unlock_irqrestore(&mdesc_lock, flags); } +EXPORT_SYMBOL(mdesc_release); -static void __init mdesc_node_alloc(u64 node, struct mdesc_elem *ep, const char *names) +void mdesc_update(void) { - unsigned int num_arcs = count_arcs(ep); - struct mdesc_node *mp; + unsigned long len, real_len, status; + struct mdesc_handle *hp, *orig_hp; + unsigned long flags; + + (void) sun4v_mach_desc(0UL, 0UL, &len); + + hp = mdesc_alloc(len, &kmalloc_mdesc_memops); + if (!hp) { + printk(KERN_ERR "MD: mdesc alloc fails\n"); + return; + } + + status = sun4v_mach_desc(__pa(&hp->mdesc), len, &real_len); + if (status != HV_EOK || real_len > len) { + printk(KERN_ERR "MD: mdesc reread fails with %lu\n", + status); + atomic_dec(&hp->refcnt); + mdesc_free(hp); + return; + } - mp = mdesc_early_alloc(sizeof(*mp) + - (num_arcs * sizeof(struct mdesc_arc))); - mp->name = names + ep->name_offset; - mp->node = node; - mp->unique_id = unique_id++; - mp->num_arcs = num_arcs; + spin_lock_irqsave(&mdesc_lock, flags); + orig_hp = cur_mdesc; + cur_mdesc = hp; - hash_node(mp); + if (atomic_dec_and_test(&orig_hp->refcnt)) + mdesc_free(orig_hp); + else + list_add(&orig_hp->list, &mdesc_zombie_list); + spin_unlock_irqrestore(&mdesc_lock, flags); } -static inline struct mdesc_elem *node_block(struct mdesc_hdr *mdesc) +static struct mdesc_elem *node_block(struct mdesc_hdr *mdesc) { return (struct mdesc_elem *) (mdesc + 1); } -static inline void *name_block(struct mdesc_hdr *mdesc) +static void *name_block(struct mdesc_hdr *mdesc) { return ((void *) node_block(mdesc)) + mdesc->node_sz; } -static inline void *data_block(struct mdesc_hdr *mdesc) +static void *data_block(struct mdesc_hdr *mdesc) { return ((void *) name_block(mdesc)) + mdesc->name_sz; } -/* In order to avoid recursion (the graph can be very deep) we use a - * two pass algorithm. First we allocate all the nodes and hash them. - * Then we iterate over each node, filling in the arcs and properties. - */ -static void __init build_all_nodes(struct mdesc_hdr *mdesc) +u64 mdesc_node_by_name(struct mdesc_handle *hp, + u64 from_node, const char *name) { - struct mdesc_elem *start, *ep; - struct mdesc_node *mp; - const char *names; - void *data; - u64 last_node; + struct mdesc_elem *ep = node_block(&hp->mdesc); + const char *names = name_block(&hp->mdesc); + u64 last_node = hp->mdesc.node_sz / 16; + u64 ret; + + if (from_node == MDESC_NODE_NULL) { + ret = from_node = 0; + } else if (from_node >= last_node) { + return MDESC_NODE_NULL; + } else { + ret = ep[from_node].d.val; + } - start = ep = node_block(mdesc); - last_node = mdesc->node_sz / 16; + while (ret < last_node) { + if (ep[ret].tag != MD_NODE) + return MDESC_NODE_NULL; + if (!strcmp(names + ep[ret].name_offset, name)) + break; + ret = ep[ret].d.val; + } + if (ret >= last_node) + ret = MDESC_NODE_NULL; + return ret; +} +EXPORT_SYMBOL(mdesc_node_by_name); - names = name_block(mdesc); +const void *mdesc_get_property(struct mdesc_handle *hp, u64 node, + const char *name, int *lenp) +{ + const char *names = name_block(&hp->mdesc); + u64 last_node = hp->mdesc.node_sz / 16; + void *data = data_block(&hp->mdesc); + struct mdesc_elem *ep; - while (1) { - u64 node = ep - start; + if (node == MDESC_NODE_NULL || node >= last_node) + return NULL; - if (ep->tag == MD_LIST_END) + ep = node_block(&hp->mdesc) + node; + ep++; + for (; ep->tag != MD_NODE_END; ep++) { + void *val = NULL; + int len = 0; + + switch (ep->tag) { + case MD_PROP_VAL: + val = &ep->d.val; + len = 8; break; - if (ep->tag != MD_NODE) { - prom_printf("MDESC: Inconsistent element list.\n"); - prom_halt(); - } - - mdesc_node_alloc(node, ep, names); + case MD_PROP_STR: + case MD_PROP_DATA: + val = data + ep->d.data.data_offset; + len = ep->d.data.data_len; + break; - if (ep->d.val >= last_node) { - printk("MDESC: Warning, early break out of node scan.\n"); - printk("MDESC: Next node [%lu] last_node [%lu].\n", - node, last_node); + default: break; } + if (!val) + continue; - ep = start + ep->d.val; + if (!strcmp(names + ep->name_offset, name)) { + if (lenp) + *lenp = len; + return val; + } } - data = data_block(mdesc); - for (mp = allnodes; mp; mp = mp->allnodes_next) { - struct mdesc_elem *ep = start + mp->node; - struct property **link = &mp->properties; - unsigned int this_arc = 0; - - ep++; - while (ep->tag != MD_NODE_END) { - switch (ep->tag) { - case MD_PROP_ARC: { - struct mdesc_node *target; - - if (this_arc >= mp->num_arcs) { - prom_printf("MDESC: ARC overrun [%u:%u]\n", - this_arc, mp->num_arcs); - prom_halt(); - } - target = find_node(ep->d.val); - if (!target) { - printk("MDESC: Warning, arc points to " - "missing node, ignoring.\n"); - break; - } - mp->arcs[this_arc].name = - (names + ep->name_offset); - mp->arcs[this_arc].arc = target; - this_arc++; - break; - } + return NULL; +} +EXPORT_SYMBOL(mdesc_get_property); - case MD_PROP_VAL: - case MD_PROP_STR: - case MD_PROP_DATA: { - struct property *p = mdesc_early_alloc(sizeof(*p)); - - p->unique_id = unique_id++; - p->name = (char *) names + ep->name_offset; - if (ep->tag == MD_PROP_VAL) { - p->value = &ep->d.val; - p->length = 8; - } else { - p->value = data + ep->d.data.data_offset; - p->length = ep->d.data.data_len; - } - *link = p; - link = &p->next; - break; - } +u64 mdesc_next_arc(struct mdesc_handle *hp, u64 from, const char *arc_type) +{ + struct mdesc_elem *ep, *base = node_block(&hp->mdesc); + const char *names = name_block(&hp->mdesc); + u64 last_node = hp->mdesc.node_sz / 16; - case MD_NOOP: - break; + if (from == MDESC_NODE_NULL || from >= last_node) + return MDESC_NODE_NULL; - default: - printk("MDESC: Warning, ignoring unknown tag type %02x\n", - ep->tag); - } - ep++; - } + ep = base + from; + + ep++; + for (; ep->tag != MD_NODE_END; ep++) { + if (ep->tag != MD_PROP_ARC) + continue; + + if (strcmp(names + ep->name_offset, arc_type)) + continue; + + return ep - base; } + + return MDESC_NODE_NULL; } +EXPORT_SYMBOL(mdesc_next_arc); -static unsigned int __init count_nodes(struct mdesc_hdr *mdesc) +u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc) { - struct mdesc_elem *ep = node_block(mdesc); - struct mdesc_elem *end; - unsigned int cnt = 0; - - end = ((void *)ep) + mdesc->node_sz; - while (ep < end) { - if (ep->tag == MD_NODE) - cnt++; - ep++; - } - return cnt; + struct mdesc_elem *ep, *base = node_block(&hp->mdesc); + + ep = base + arc; + + return ep->d.val; +} +EXPORT_SYMBOL(mdesc_arc_target); + +const char *mdesc_node_name(struct mdesc_handle *hp, u64 node) +{ + struct mdesc_elem *ep, *base = node_block(&hp->mdesc); + const char *names = name_block(&hp->mdesc); + u64 last_node = hp->mdesc.node_sz / 16; + + if (node == MDESC_NODE_NULL || node >= last_node) + return NULL; + + ep = base + node; + if (ep->tag != MD_NODE) + return NULL; + + return names + ep->name_offset; } +EXPORT_SYMBOL(mdesc_node_name); static void __init report_platform_properties(void) { - struct mdesc_node *pn = md_find_node_by_name(NULL, "platform"); + struct mdesc_handle *hp = mdesc_grab(); + u64 pn = mdesc_node_by_name(hp, MDESC_NODE_NULL, "platform"); const char *s; const u64 *v; - if (!pn) { + if (pn == MDESC_NODE_NULL) { prom_printf("No platform node in machine-description.\n"); prom_halt(); } - s = md_get_property(pn, "banner-name", NULL); + s = mdesc_get_property(hp, pn, "banner-name", NULL); printk("PLATFORM: banner-name [%s]\n", s); - s = md_get_property(pn, "name", NULL); + s = mdesc_get_property(hp, pn, "name", NULL); printk("PLATFORM: name [%s]\n", s); - v = md_get_property(pn, "hostid", NULL); + v = mdesc_get_property(hp, pn, "hostid", NULL); if (v) printk("PLATFORM: hostid [%08lx]\n", *v); - v = md_get_property(pn, "serial#", NULL); + v = mdesc_get_property(hp, pn, "serial#", NULL); if (v) printk("PLATFORM: serial# [%08lx]\n", *v); - v = md_get_property(pn, "stick-frequency", NULL); + v = mdesc_get_property(hp, pn, "stick-frequency", NULL); printk("PLATFORM: stick-frequency [%08lx]\n", *v); - v = md_get_property(pn, "mac-address", NULL); + v = mdesc_get_property(hp, pn, "mac-address", NULL); if (v) printk("PLATFORM: mac-address [%lx]\n", *v); - v = md_get_property(pn, "watchdog-resolution", NULL); + v = mdesc_get_property(hp, pn, "watchdog-resolution", NULL); if (v) printk("PLATFORM: watchdog-resolution [%lu ms]\n", *v); - v = md_get_property(pn, "watchdog-max-timeout", NULL); + v = mdesc_get_property(hp, pn, "watchdog-max-timeout", NULL); if (v) printk("PLATFORM: watchdog-max-timeout [%lu ms]\n", *v); - v = md_get_property(pn, "max-cpus", NULL); + v = mdesc_get_property(hp, pn, "max-cpus", NULL); if (v) printk("PLATFORM: max-cpus [%lu]\n", *v); + +#ifdef CONFIG_SMP + { + int max_cpu, i; + + if (v) { + max_cpu = *v; + if (max_cpu > NR_CPUS) + max_cpu = NR_CPUS; + } else { + max_cpu = NR_CPUS; + } + for (i = 0; i < max_cpu; i++) + cpu_set(i, cpu_possible_map); + } +#endif + + mdesc_release(hp); } static int inline find_in_proplist(const char *list, const char *match, int len) @@ -369,15 +462,17 @@ static int inline find_in_proplist(const char *list, const char *match, int len) return 0; } -static void __init fill_in_one_cache(cpuinfo_sparc *c, struct mdesc_node *mp) +static void __devinit fill_in_one_cache(cpuinfo_sparc *c, + struct mdesc_handle *hp, + u64 mp) { - const u64 *level = md_get_property(mp, "level", NULL); - const u64 *size = md_get_property(mp, "size", NULL); - const u64 *line_size = md_get_property(mp, "line-size", NULL); + const u64 *level = mdesc_get_property(hp, mp, "level", NULL); + const u64 *size = mdesc_get_property(hp, mp, "size", NULL); + const u64 *line_size = mdesc_get_property(hp, mp, "line-size", NULL); const char *type; int type_len; - type = md_get_property(mp, "type", &type_len); + type = mdesc_get_property(hp, mp, "type", &type_len); switch (*level) { case 1: @@ -400,48 +495,45 @@ static void __init fill_in_one_cache(cpuinfo_sparc *c, struct mdesc_node *mp) } if (*level == 1) { - unsigned int i; - - for (i = 0; i < mp->num_arcs; i++) { - struct mdesc_node *t = mp->arcs[i].arc; + u64 a; - if (strcmp(mp->arcs[i].name, "fwd")) - continue; + mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) { + u64 target = mdesc_arc_target(hp, a); + const char *name = mdesc_node_name(hp, target); - if (!strcmp(t->name, "cache")) - fill_in_one_cache(c, t); + if (!strcmp(name, "cache")) + fill_in_one_cache(c, hp, target); } } } -static void __init mark_core_ids(struct mdesc_node *mp, int core_id) +static void __devinit mark_core_ids(struct mdesc_handle *hp, u64 mp, + int core_id) { - unsigned int i; + u64 a; - for (i = 0; i < mp->num_arcs; i++) { - struct mdesc_node *t = mp->arcs[i].arc; + mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_BACK) { + u64 t = mdesc_arc_target(hp, a); + const char *name; const u64 *id; - if (strcmp(mp->arcs[i].name, "back")) - continue; - - if (!strcmp(t->name, "cpu")) { - id = md_get_property(t, "id", NULL); + name = mdesc_node_name(hp, t); + if (!strcmp(name, "cpu")) { + id = mdesc_get_property(hp, t, "id", NULL); if (*id < NR_CPUS) cpu_data(*id).core_id = core_id; } else { - unsigned int j; + u64 j; - for (j = 0; j < t->num_arcs; j++) { - struct mdesc_node *n = t->arcs[j].arc; + mdesc_for_each_arc(j, hp, t, MDESC_ARC_TYPE_BACK) { + u64 n = mdesc_arc_target(hp, j); + const char *n_name; - if (strcmp(t->arcs[j].name, "back")) + n_name = mdesc_node_name(hp, n); + if (strcmp(n_name, "cpu")) continue; - if (strcmp(n->name, "cpu")) - continue; - - id = md_get_property(n, "id", NULL); + id = mdesc_get_property(hp, n, "id", NULL); if (*id < NR_CPUS) cpu_data(*id).core_id = core_id; } @@ -449,78 +541,81 @@ static void __init mark_core_ids(struct mdesc_node *mp, int core_id) } } -static void __init set_core_ids(void) +static void __devinit set_core_ids(struct mdesc_handle *hp) { - struct mdesc_node *mp; int idx; + u64 mp; idx = 1; - md_for_each_node_by_name(mp, "cache") { - const u64 *level = md_get_property(mp, "level", NULL); + mdesc_for_each_node_by_name(hp, mp, "cache") { + const u64 *level; const char *type; int len; + level = mdesc_get_property(hp, mp, "level", NULL); if (*level != 1) continue; - type = md_get_property(mp, "type", &len); + type = mdesc_get_property(hp, mp, "type", &len); if (!find_in_proplist(type, "instn", len)) continue; - mark_core_ids(mp, idx); + mark_core_ids(hp, mp, idx); idx++; } } -static void __init mark_proc_ids(struct mdesc_node *mp, int proc_id) +static void __devinit mark_proc_ids(struct mdesc_handle *hp, u64 mp, + int proc_id) { - int i; + u64 a; - for (i = 0; i < mp->num_arcs; i++) { - struct mdesc_node *t = mp->arcs[i].arc; + mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_BACK) { + u64 t = mdesc_arc_target(hp, a); + const char *name; const u64 *id; - if (strcmp(mp->arcs[i].name, "back")) - continue; - - if (strcmp(t->name, "cpu")) + name = mdesc_node_name(hp, t); + if (strcmp(name, "cpu")) continue; - id = md_get_property(t, "id", NULL); + id = mdesc_get_property(hp, t, "id", NULL); if (*id < NR_CPUS) cpu_data(*id).proc_id = proc_id; } } -static void __init __set_proc_ids(const char *exec_unit_name) +static void __devinit __set_proc_ids(struct mdesc_handle *hp, + const char *exec_unit_name) { - struct mdesc_node *mp; int idx; + u64 mp; idx = 0; - md_for_each_node_by_name(mp, exec_unit_name) { + mdesc_for_each_node_by_name(hp, mp, exec_unit_name) { const char *type; int len; - type = md_get_property(mp, "type", &len); + type = mdesc_get_property(hp, mp, "type", &len); if (!find_in_proplist(type, "int", len) && !find_in_proplist(type, "integer", len)) continue; - mark_proc_ids(mp, idx); + mark_proc_ids(hp, mp, idx); idx++; } } -static void __init set_proc_ids(void) +static void __devinit set_proc_ids(struct mdesc_handle *hp) { - __set_proc_ids("exec_unit"); - __set_proc_ids("exec-unit"); + __set_proc_ids(hp, "exec_unit"); + __set_proc_ids(hp, "exec-unit"); } -static void __init get_one_mondo_bits(const u64 *p, unsigned int *mask, unsigned char def) +static void __devinit get_one_mondo_bits(const u64 *p, unsigned int *mask, + unsigned char def) { u64 val; @@ -538,35 +633,37 @@ use_default: *mask = ((1U << def) * 64U) - 1U; } -static void __init get_mondo_data(struct mdesc_node *mp, struct trap_per_cpu *tb) +static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp, + struct trap_per_cpu *tb) { const u64 *val; - val = md_get_property(mp, "q-cpu-mondo-#bits", NULL); + val = mdesc_get_property(hp, mp, "q-cpu-mondo-#bits", NULL); get_one_mondo_bits(val, &tb->cpu_mondo_qmask, 7); - val = md_get_property(mp, "q-dev-mondo-#bits", NULL); + val = mdesc_get_property(hp, mp, "q-dev-mondo-#bits", NULL); get_one_mondo_bits(val, &tb->dev_mondo_qmask, 7); - val = md_get_property(mp, "q-resumable-#bits", NULL); + val = mdesc_get_property(hp, mp, "q-resumable-#bits", NULL); get_one_mondo_bits(val, &tb->resum_qmask, 6); - val = md_get_property(mp, "q-nonresumable-#bits", NULL); + val = mdesc_get_property(hp, mp, "q-nonresumable-#bits", NULL); get_one_mondo_bits(val, &tb->nonresum_qmask, 2); } -static void __init mdesc_fill_in_cpu_data(void) +void __devinit mdesc_fill_in_cpu_data(cpumask_t mask) { - struct mdesc_node *mp; + struct mdesc_handle *hp = mdesc_grab(); + u64 mp; ncpus_probed = 0; - md_for_each_node_by_name(mp, "cpu") { - const u64 *id = md_get_property(mp, "id", NULL); - const u64 *cfreq = md_get_property(mp, "clock-frequency", NULL); + mdesc_for_each_node_by_name(hp, mp, "cpu") { + const u64 *id = mdesc_get_property(hp, mp, "id", NULL); + const u64 *cfreq = mdesc_get_property(hp, mp, "clock-frequency", NULL); struct trap_per_cpu *tb; cpuinfo_sparc *c; - unsigned int i; int cpuid; + u64 a; ncpus_probed++; @@ -575,6 +672,8 @@ static void __init mdesc_fill_in_cpu_data(void) #ifdef CONFIG_SMP if (cpuid >= NR_CPUS) continue; + if (!cpu_isset(cpuid, mask)) + continue; #else /* On uniprocessor we only want the values for the * real physical cpu the kernel booted onto, however @@ -589,35 +688,30 @@ static void __init mdesc_fill_in_cpu_data(void) c->clock_tick = *cfreq; tb = &trap_block[cpuid]; - get_mondo_data(mp, tb); - - for (i = 0; i < mp->num_arcs; i++) { - struct mdesc_node *t = mp->arcs[i].arc; - unsigned int j; + get_mondo_data(hp, mp, tb); - if (strcmp(mp->arcs[i].name, "fwd")) - continue; + mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) { + u64 j, t = mdesc_arc_target(hp, a); + const char *t_name; - if (!strcmp(t->name, "cache")) { - fill_in_one_cache(c, t); + t_name = mdesc_node_name(hp, t); + if (!strcmp(t_name, "cache")) { + fill_in_one_cache(c, hp, t); continue; } - for (j = 0; j < t->num_arcs; j++) { - struct mdesc_node *n; + mdesc_for_each_arc(j, hp, t, MDESC_ARC_TYPE_FWD) { + u64 n = mdesc_arc_target(hp, j); + const char *n_name; - n = t->arcs[j].arc; - if (strcmp(t->arcs[j].name, "fwd")) - continue; - - if (!strcmp(n->name, "cache")) - fill_in_one_cache(c, n); + n_name = mdesc_node_name(hp, n); + if (!strcmp(n_name, "cache")) + fill_in_one_cache(c, hp, n); } } #ifdef CONFIG_SMP cpu_set(cpuid, cpu_present_map); - cpu_set(cpuid, phys_cpu_present_map); #endif c->core_id = 0; @@ -628,45 +722,43 @@ static void __init mdesc_fill_in_cpu_data(void) sparc64_multi_core = 1; #endif - set_core_ids(); - set_proc_ids(); + set_core_ids(hp); + set_proc_ids(hp); smp_fill_in_sib_core_maps(); + + mdesc_release(hp); } void __init sun4v_mdesc_init(void) { + struct mdesc_handle *hp; unsigned long len, real_len, status; + cpumask_t mask; (void) sun4v_mach_desc(0UL, 0UL, &len); printk("MDESC: Size is %lu bytes.\n", len); - main_mdesc = mdesc_early_alloc(len); + hp = mdesc_alloc(len, &bootmem_mdesc_memops); + if (hp == NULL) { + prom_printf("MDESC: alloc of %lu bytes failed.\n", len); + prom_halt(); + } - status = sun4v_mach_desc(__pa(main_mdesc), len, &real_len); + status = sun4v_mach_desc(__pa(&hp->mdesc), len, &real_len); if (status != HV_EOK || real_len > len) { prom_printf("sun4v_mach_desc fails, err(%lu), " "len(%lu), real_len(%lu)\n", status, len, real_len); + mdesc_free(hp); prom_halt(); } - len = count_nodes(main_mdesc); - printk("MDESC: %lu nodes.\n", len); - - len = roundup_pow_of_two(len); - - mdesc_hash = mdesc_early_alloc(len * sizeof(struct mdesc_node *)); - mdesc_hash_size = len; - - printk("MDESC: Hash size %lu entries.\n", len); - - build_all_nodes(main_mdesc); - - printk("MDESC: Built graph with %u bytes of memory.\n", - mdesc_early_allocated); + cur_mdesc = hp; report_platform_properties(); - mdesc_fill_in_cpu_data(); + + cpus_setall(mask); + mdesc_fill_in_cpu_data(mask); } diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 81f4a5ea05f7..55ad1b899bb8 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -448,6 +448,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, */ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); dev->class = class >> 8; + dev->revision = class & 0xff; sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c index 5d6adea3967f..8dd4294ad21e 100644 --- a/arch/sparc64/kernel/power.c +++ b/arch/sparc64/kernel/power.c @@ -1,7 +1,6 @@ -/* $Id: power.c,v 1.10 2001/12/11 01:57:16 davem Exp $ - * power.c: Power management driver. +/* power.c: Power management driver. * - * Copyright (C) 1999 David S. Miller (davem@redhat.com) + * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net) */ #include <linux/kernel.h> @@ -19,6 +18,7 @@ #include <asm/prom.h> #include <asm/of_device.h> #include <asm/io.h> +#include <asm/power.h> #include <asm/sstate.h> #include <linux/unistd.h> @@ -29,24 +29,26 @@ */ int scons_pwroff = 1; -#ifdef CONFIG_PCI -#include <linux/pci.h> static void __iomem *power_reg; static DECLARE_WAIT_QUEUE_HEAD(powerd_wait); static int button_pressed; -static irqreturn_t power_handler(int irq, void *dev_id) +void wake_up_powerd(void) { if (button_pressed == 0) { button_pressed = 1; wake_up(&powerd_wait); } +} + +static irqreturn_t power_handler(int irq, void *dev_id) +{ + wake_up_powerd(); /* FIXME: Check registers for status... */ return IRQ_HANDLED; } -#endif /* CONFIG_PCI */ extern void machine_halt(void); extern void machine_alt_power_off(void); @@ -56,19 +58,18 @@ void machine_power_off(void) { sstate_poweroff(); if (!serial_console || scons_pwroff) { -#ifdef CONFIG_PCI if (power_reg) { /* Both register bits seem to have the * same effect, so until I figure out * what the difference is... */ writel(AUXIO_PCIO_CPWR_OFF | AUXIO_PCIO_SPWR_OFF, power_reg); - } else -#endif /* CONFIG_PCI */ + } else { if (poweroff_method != NULL) { poweroff_method(); /* not reached */ } + } } machine_halt(); } @@ -76,7 +77,6 @@ void machine_power_off(void) void (*pm_power_off)(void) = machine_power_off; EXPORT_SYMBOL(pm_power_off); -#ifdef CONFIG_PCI static int powerd(void *__unused) { static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/sbin:/usr/sbin:/bin:/usr/bin", NULL }; @@ -86,7 +86,7 @@ static int powerd(void *__unused) daemonize("powerd"); add_wait_queue(&powerd_wait, &wait); -again: + for (;;) { set_task_state(current, TASK_INTERRUPTIBLE); if (button_pressed) @@ -100,16 +100,28 @@ again: /* Ok, down we go... */ button_pressed = 0; if (kernel_execve("/sbin/shutdown", argv, envp) < 0) { - printk("powerd: shutdown execution failed\n"); - add_wait_queue(&powerd_wait, &wait); - goto again; + printk(KERN_ERR "powerd: shutdown execution failed\n"); + machine_power_off(); } return 0; } +int start_powerd(void) +{ + int err; + + err = kernel_thread(powerd, NULL, CLONE_FS); + if (err < 0) + printk(KERN_ERR "power: Failed to start power daemon.\n"); + else + printk(KERN_INFO "power: powerd running.\n"); + + return err; +} + static int __init has_button_interrupt(unsigned int irq, struct device_node *dp) { - if (irq == PCI_IRQ_NONE) + if (irq == 0xffffffff) return 0; if (!of_find_property(dp, "button", NULL)) return 0; @@ -130,17 +142,14 @@ static int __devinit power_probe(struct of_device *op, const struct of_device_id poweroff_method = machine_halt; /* able to use the standard halt */ if (has_button_interrupt(irq, op->node)) { - if (kernel_thread(powerd, NULL, CLONE_FS) < 0) { - printk("Failed to start power daemon.\n"); + if (start_powerd() < 0) return 0; - } - printk("powerd running.\n"); if (request_irq(irq, power_handler, 0, "power", NULL) < 0) - printk("power: Error, cannot register IRQ handler.\n"); + printk(KERN_ERR "power: Cannot setup IRQ handler.\n"); } else { - printk("not using powerd.\n"); + printk(KERN_INFO "power: Not using powerd.\n"); } return 0; @@ -164,4 +173,3 @@ void __init power_init(void) of_register_driver(&power_driver, &of_bus_type); return; } -#endif /* CONFIG_PCI */ diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index f5f97e2c669c..93557507ec9f 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/compat.h> #include <linux/tick.h> #include <linux/init.h> +#include <linux/cpu.h> #include <asm/oplib.h> #include <asm/uaccess.h> @@ -49,7 +50,7 @@ /* #define VERBOSE_SHOWREGS */ -static void sparc64_yield(void) +static void sparc64_yield(int cpu) { if (tlb_type != hypervisor) return; @@ -57,7 +58,7 @@ static void sparc64_yield(void) clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); - while (!need_resched()) { + while (!need_resched() && !cpu_is_offline(cpu)) { unsigned long pstate; /* Disable interrupts. */ @@ -68,7 +69,7 @@ static void sparc64_yield(void) : "=&r" (pstate) : "i" (PSTATE_IE)); - if (!need_resched()) + if (!need_resched() && !cpu_is_offline(cpu)) sun4v_cpu_yield(); /* Re-enable interrupts. */ @@ -86,15 +87,25 @@ static void sparc64_yield(void) /* The idle loop on sparc64. */ void cpu_idle(void) { + int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); while(1) { tick_nohz_stop_sched_tick(); - while (!need_resched()) - sparc64_yield(); + + while (!need_resched() && !cpu_is_offline(cpu)) + sparc64_yield(cpu); + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); + +#ifdef CONFIG_HOTPLUG_CPU + if (cpu_is_offline(cpu)) + cpu_play_dead(); +#endif + schedule(); preempt_disable(); } diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 61036b346664..5d220302cd50 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -1808,7 +1808,7 @@ static void __init of_fill_in_cpu_data(void) #ifdef CONFIG_SMP cpu_set(cpuid, cpu_present_map); - cpu_set(cpuid, phys_cpu_present_map); + cpu_set(cpuid, cpu_possible_map); #endif } diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 7490cc670a53..aafde3dd9fd4 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -442,7 +442,6 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) "D$ parity tl1\t: %u\n" "I$ parity tl1\t: %u\n" #ifndef CONFIG_SMP - "Cpu0Bogo\t: %lu.%02lu\n" "Cpu0ClkTck\t: %016lx\n" #endif , @@ -457,9 +456,7 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) dcache_parity_tl1_occurred, icache_parity_tl1_occurred #ifndef CONFIG_SMP - , cpu_data(0).udelay_val/(500000/HZ), - (cpu_data(0).udelay_val/(5000/HZ)) % 100, - cpu_data(0).clock_tick + , cpu_data(0).clock_tick #endif ); #ifdef CONFIG_SMP diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 40e40f968d61..b448d33321c6 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1,6 +1,6 @@ /* smp.c: Sparc64 SMP support. * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net) */ #include <linux/module.h> @@ -28,6 +28,8 @@ #include <asm/tlbflush.h> #include <asm/mmu_context.h> #include <asm/cpudata.h> +#include <asm/hvtramp.h> +#include <asm/io.h> #include <asm/irq.h> #include <asm/irq_regs.h> @@ -41,22 +43,26 @@ #include <asm/sections.h> #include <asm/prom.h> #include <asm/mdesc.h> +#include <asm/ldc.h> +#include <asm/hypervisor.h> extern void calibrate_delay(void); int sparc64_multi_core __read_mostly; -/* Please don't make this stuff initdata!!! --DaveM */ -unsigned char boot_cpu_id; - +cpumask_t cpu_possible_map __read_mostly = CPU_MASK_NONE; cpumask_t cpu_online_map __read_mostly = CPU_MASK_NONE; -cpumask_t phys_cpu_present_map __read_mostly = CPU_MASK_NONE; cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; cpumask_t cpu_core_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; + +EXPORT_SYMBOL(cpu_possible_map); +EXPORT_SYMBOL(cpu_online_map); +EXPORT_SYMBOL(cpu_sibling_map); +EXPORT_SYMBOL(cpu_core_map); + static cpumask_t smp_commenced_mask; -static cpumask_t cpu_callout_map; void smp_info(struct seq_file *m) { @@ -73,18 +79,17 @@ void smp_bogo(struct seq_file *m) for_each_online_cpu(i) seq_printf(m, - "Cpu%dBogo\t: %lu.%02lu\n" "Cpu%dClkTck\t: %016lx\n", - i, cpu_data(i).udelay_val / (500000/HZ), - (cpu_data(i).udelay_val / (5000/HZ)) % 100, i, cpu_data(i).clock_tick); } +static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock); + extern void setup_sparc64_timer(void); static volatile unsigned long callin_flag = 0; -void __init smp_callin(void) +void __devinit smp_callin(void) { int cpuid = hard_smp_processor_id(); @@ -102,8 +107,6 @@ void __init smp_callin(void) local_irq_enable(); - calibrate_delay(); - cpu_data(cpuid).udelay_val = loops_per_jiffy; callin_flag = 1; __asm__ __volatile__("membar #Sync\n\t" "flush %%g6" : : : "memory"); @@ -120,7 +123,9 @@ void __init smp_callin(void) while (!cpu_isset(cpuid, smp_commenced_mask)) rmb(); + spin_lock(&call_lock); cpu_set(cpuid, cpu_online_map); + spin_unlock(&call_lock); /* idle thread is expected to have preempt disabled */ preempt_disable(); @@ -268,6 +273,67 @@ static void smp_synchronize_one_tick(int cpu) spin_unlock_irqrestore(&itc_sync_lock, flags); } +#if defined(CONFIG_SUN_LDOMS) && defined(CONFIG_HOTPLUG_CPU) +/* XXX Put this in some common place. XXX */ +static unsigned long kimage_addr_to_ra(void *p) +{ + unsigned long val = (unsigned long) p; + + return kern_base + (val - KERNBASE); +} + +static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg) +{ + extern unsigned long sparc64_ttable_tl0; + extern unsigned long kern_locked_tte_data; + extern int bigkernel; + struct hvtramp_descr *hdesc; + unsigned long trampoline_ra; + struct trap_per_cpu *tb; + u64 tte_vaddr, tte_data; + unsigned long hv_err; + + hdesc = kzalloc(sizeof(*hdesc), GFP_KERNEL); + if (!hdesc) { + printk(KERN_ERR "ldom_startcpu_cpuid: Cannot allocate " + "hvtramp_descr.\n"); + return; + } + + hdesc->cpu = cpu; + hdesc->num_mappings = (bigkernel ? 2 : 1); + + tb = &trap_block[cpu]; + tb->hdesc = hdesc; + + hdesc->fault_info_va = (unsigned long) &tb->fault_info; + hdesc->fault_info_pa = kimage_addr_to_ra(&tb->fault_info); + + hdesc->thread_reg = thread_reg; + + tte_vaddr = (unsigned long) KERNBASE; + tte_data = kern_locked_tte_data; + + hdesc->maps[0].vaddr = tte_vaddr; + hdesc->maps[0].tte = tte_data; + if (bigkernel) { + tte_vaddr += 0x400000; + tte_data += 0x400000; + hdesc->maps[1].vaddr = tte_vaddr; + hdesc->maps[1].tte = tte_data; + } + + trampoline_ra = kimage_addr_to_ra(hv_cpu_startup); + + hv_err = sun4v_cpu_start(cpu, trampoline_ra, + kimage_addr_to_ra(&sparc64_ttable_tl0), + __pa(hdesc)); + if (hv_err) + printk(KERN_ERR "ldom_startcpu_cpuid: sun4v_cpu_start() " + "gives error %lu\n", hv_err); +} +#endif + extern void sun4v_init_mondo_queues(int use_bootmem, int cpu, int alloc, int load); extern unsigned long sparc64_cpu_startup; @@ -280,6 +346,7 @@ static struct thread_info *cpu_new_thread = NULL; static int __devinit smp_boot_one_cpu(unsigned int cpu) { + struct trap_per_cpu *tb = &trap_block[cpu]; unsigned long entry = (unsigned long)(&sparc64_cpu_startup); unsigned long cookie = @@ -290,20 +357,25 @@ static int __devinit smp_boot_one_cpu(unsigned int cpu) p = fork_idle(cpu); callin_flag = 0; cpu_new_thread = task_thread_info(p); - cpu_set(cpu, cpu_callout_map); if (tlb_type == hypervisor) { /* Alloc the mondo queues, cpu will load them. */ sun4v_init_mondo_queues(0, cpu, 1, 0); - prom_startcpu_cpuid(cpu, entry, cookie); +#if defined(CONFIG_SUN_LDOMS) && defined(CONFIG_HOTPLUG_CPU) + if (ldom_domaining_enabled) + ldom_startcpu_cpuid(cpu, + (unsigned long) cpu_new_thread); + else +#endif + prom_startcpu_cpuid(cpu, entry, cookie); } else { struct device_node *dp = of_find_node_by_cpuid(cpu); prom_startcpu(dp->node, entry, cookie); } - for (timeout = 0; timeout < 5000000; timeout++) { + for (timeout = 0; timeout < 50000; timeout++) { if (callin_flag) break; udelay(100); @@ -313,11 +385,15 @@ static int __devinit smp_boot_one_cpu(unsigned int cpu) ret = 0; } else { printk("Processor %d is stuck.\n", cpu); - cpu_clear(cpu, cpu_callout_map); ret = -ENODEV; } cpu_new_thread = NULL; + if (tb->hdesc) { + kfree(tb->hdesc); + tb->hdesc = NULL; + } + return ret; } @@ -720,7 +796,6 @@ struct call_data_struct { int wait; }; -static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock); static struct call_data_struct *call_data; extern unsigned long xcall_call_function; @@ -1152,34 +1227,14 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs) preempt_enable(); } -void __init smp_tick_init(void) -{ - boot_cpu_id = hard_smp_processor_id(); -} - /* /proc/profile writes can call this, don't __init it please. */ int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } -/* Constrain the number of cpus to max_cpus. */ void __init smp_prepare_cpus(unsigned int max_cpus) { - int i; - - if (num_possible_cpus() > max_cpus) { - for_each_possible_cpu(i) { - if (i != boot_cpu_id) { - cpu_clear(i, phys_cpu_present_map); - cpu_clear(i, cpu_present_map); - if (num_possible_cpus() <= max_cpus) - break; - } - } - } - - cpu_data(boot_cpu_id).udelay_val = loops_per_jiffy; } void __devinit smp_prepare_boot_cpu(void) @@ -1190,30 +1245,32 @@ void __devinit smp_fill_in_sib_core_maps(void) { unsigned int i; - for_each_possible_cpu(i) { + for_each_present_cpu(i) { unsigned int j; + cpus_clear(cpu_core_map[i]); if (cpu_data(i).core_id == 0) { cpu_set(i, cpu_core_map[i]); continue; } - for_each_possible_cpu(j) { + for_each_present_cpu(j) { if (cpu_data(i).core_id == cpu_data(j).core_id) cpu_set(j, cpu_core_map[i]); } } - for_each_possible_cpu(i) { + for_each_present_cpu(i) { unsigned int j; + cpus_clear(cpu_sibling_map[i]); if (cpu_data(i).proc_id == -1) { cpu_set(i, cpu_sibling_map[i]); continue; } - for_each_possible_cpu(j) { + for_each_present_cpu(j) { if (cpu_data(i).proc_id == cpu_data(j).proc_id) cpu_set(j, cpu_sibling_map[i]); @@ -1242,18 +1299,112 @@ int __cpuinit __cpu_up(unsigned int cpu) return ret; } -void __init smp_cpus_done(unsigned int max_cpus) +#ifdef CONFIG_HOTPLUG_CPU +void cpu_play_dead(void) +{ + int cpu = smp_processor_id(); + unsigned long pstate; + + idle_task_exit(); + + if (tlb_type == hypervisor) { + struct trap_per_cpu *tb = &trap_block[cpu]; + + sun4v_cpu_qconf(HV_CPU_QUEUE_CPU_MONDO, + tb->cpu_mondo_pa, 0); + sun4v_cpu_qconf(HV_CPU_QUEUE_DEVICE_MONDO, + tb->dev_mondo_pa, 0); + sun4v_cpu_qconf(HV_CPU_QUEUE_RES_ERROR, + tb->resum_mondo_pa, 0); + sun4v_cpu_qconf(HV_CPU_QUEUE_NONRES_ERROR, + tb->nonresum_mondo_pa, 0); + } + + cpu_clear(cpu, smp_commenced_mask); + membar_safe("#Sync"); + + local_irq_disable(); + + __asm__ __volatile__( + "rdpr %%pstate, %0\n\t" + "wrpr %0, %1, %%pstate" + : "=r" (pstate) + : "i" (PSTATE_IE)); + + while (1) + barrier(); +} + +int __cpu_disable(void) { - unsigned long bogosum = 0; + int cpu = smp_processor_id(); + cpuinfo_sparc *c; int i; - for_each_online_cpu(i) - bogosum += cpu_data(i).udelay_val; - printk("Total of %ld processors activated " - "(%lu.%02lu BogoMIPS).\n", - (long) num_online_cpus(), - bogosum/(500000/HZ), - (bogosum/(5000/HZ))%100); + for_each_cpu_mask(i, cpu_core_map[cpu]) + cpu_clear(cpu, cpu_core_map[i]); + cpus_clear(cpu_core_map[cpu]); + + for_each_cpu_mask(i, cpu_sibling_map[cpu]) + cpu_clear(cpu, cpu_sibling_map[i]); + cpus_clear(cpu_sibling_map[cpu]); + + c = &cpu_data(cpu); + + c->core_id = 0; + c->proc_id = -1; + + spin_lock(&call_lock); + cpu_clear(cpu, cpu_online_map); + spin_unlock(&call_lock); + + smp_wmb(); + + /* Make sure no interrupts point to this cpu. */ + fixup_irqs(); + + local_irq_enable(); + mdelay(1); + local_irq_disable(); + + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + int i; + + for (i = 0; i < 100; i++) { + smp_rmb(); + if (!cpu_isset(cpu, smp_commenced_mask)) + break; + msleep(100); + } + if (cpu_isset(cpu, smp_commenced_mask)) { + printk(KERN_ERR "CPU %u didn't die...\n", cpu); + } else { +#if defined(CONFIG_SUN_LDOMS) + unsigned long hv_err; + int limit = 100; + + do { + hv_err = sun4v_cpu_stop(cpu); + if (hv_err == HV_EOK) { + cpu_clear(cpu, cpu_present_map); + break; + } + } while (--limit > 0); + if (limit <= 0) { + printk(KERN_ERR "sun4v_cpu_stop() fails err=%lu\n", + hv_err); + } +#endif + } +} +#endif + +void __init smp_cpus_done(unsigned int max_cpus) +{ } void smp_send_reschedule(int cpu) diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 6fa761612899..719d676c2ddc 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -1,7 +1,6 @@ -/* $Id: sparc64_ksyms.c,v 1.121 2002/02/09 19:49:31 davem Exp $ - * arch/sparc64/kernel/sparc64_ksyms.c: Sparc64 specific ksyms support. +/* arch/sparc64/kernel/sparc64_ksyms.c: Sparc64 specific ksyms support. * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz) */ @@ -28,7 +27,6 @@ #include <net/compat.h> #include <asm/oplib.h> -#include <asm/delay.h> #include <asm/system.h> #include <asm/auxio.h> #include <asm/pgtable.h> @@ -124,10 +122,6 @@ EXPORT_SYMBOL(__write_lock); EXPORT_SYMBOL(__write_unlock); EXPORT_SYMBOL(__write_trylock); -/* CPU online map and active count. */ -EXPORT_SYMBOL(cpu_online_map); -EXPORT_SYMBOL(phys_cpu_present_map); - EXPORT_SYMBOL(smp_call_function); #endif /* CONFIG_SMP */ @@ -330,12 +324,6 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(strncmp); -/* Delay routines. */ -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__ndelay); -EXPORT_SYMBOL(__const_udelay); -EXPORT_SYMBOL(__delay); - void VISenter(void); /* RAID code needs this */ EXPORT_SYMBOL(VISenter); diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c index cdb1477af89f..52816c7be0b9 100644 --- a/arch/sparc64/kernel/sysfs.c +++ b/arch/sparc64/kernel/sysfs.c @@ -193,7 +193,6 @@ static ssize_t show_##NAME(struct sys_device *dev, char *buf) \ } SHOW_CPUDATA_ULONG_NAME(clock_tick, clock_tick); -SHOW_CPUDATA_ULONG_NAME(udelay_val, udelay_val); SHOW_CPUDATA_UINT_NAME(l1_dcache_size, dcache_size); SHOW_CPUDATA_UINT_NAME(l1_dcache_line_size, dcache_line_size); SHOW_CPUDATA_UINT_NAME(l1_icache_size, icache_size); @@ -203,7 +202,6 @@ SHOW_CPUDATA_UINT_NAME(l2_cache_line_size, ecache_line_size); static struct sysdev_attribute cpu_core_attrs[] = { _SYSDEV_ATTR(clock_tick, 0444, show_clock_tick, NULL), - _SYSDEV_ATTR(udelay_val, 0444, show_udelay_val, NULL), _SYSDEV_ATTR(l1_dcache_size, 0444, show_l1_dcache_size, NULL), _SYSDEV_ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL), _SYSDEV_ATTR(l1_icache_size, 0444, show_l1_icache_size, NULL), diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index a31a0439244f..62e316ab1339 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -849,9 +849,6 @@ static unsigned long sparc64_init_timers(void) { struct device_node *dp; unsigned long clock; -#ifdef CONFIG_SMP - extern void smp_tick_init(void); -#endif dp = of_find_node_by_path("/"); if (tlb_type == spitfire) { @@ -874,10 +871,6 @@ static unsigned long sparc64_init_timers(void) clock = of_getintprop_default(dp, "stick-frequency", 0); } -#ifdef CONFIG_SMP - smp_tick_init(); -#endif - return clock; } @@ -1038,10 +1031,31 @@ static void __init setup_clockevent_multiplier(unsigned long hz) sparc64_clockevent.mult = mult; } +static unsigned long tb_ticks_per_usec __read_mostly; + +void __delay(unsigned long loops) +{ + unsigned long bclock, now; + + bclock = tick_ops->get_tick(); + do { + now = tick_ops->get_tick(); + } while ((now-bclock) < loops); +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + void __init time_init(void) { unsigned long clock = sparc64_init_timers(); + tb_ticks_per_usec = clock / USEC_PER_SEC; + timer_ticks_per_nsec_quotient = clocksource_hz2mult(clock, SPARC64_NSEC_PER_CYC_SHIFT); diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c new file mode 100644 index 000000000000..49569b44ea1f --- /dev/null +++ b/arch/sparc64/kernel/vio.c @@ -0,0 +1,395 @@ +/* vio.c: Virtual I/O channel devices probing infrastructure. + * + * Copyright (c) 2003-2005 IBM Corp. + * Dave Engebretsen engebret@us.ibm.com + * Santiago Leon santil@us.ibm.com + * Hollis Blanchard <hollisb@us.ibm.com> + * Stephen Rothwell + * + * Adapted to sparc64 by David S. Miller davem@davemloft.net + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/init.h> + +#include <asm/mdesc.h> +#include <asm/vio.h> + +static inline int find_in_proplist(const char *list, const char *match, + int len) +{ + while (len > 0) { + int l; + + if (!strcmp(list, match)) + return 1; + l = strlen(list) + 1; + list += l; + len -= l; + } + return 0; +} + +static const struct vio_device_id *vio_match_device( + const struct vio_device_id *matches, + const struct vio_dev *dev) +{ + const char *type, *compat; + int len; + + type = dev->type; + compat = dev->compat; + len = dev->compat_len; + + while (matches->type[0] || matches->compat[0]) { + int match = 1; + if (matches->type[0]) + match &= !strcmp(matches->type, type); + + if (matches->compat[0]) { + match &= len && + find_in_proplist(compat, matches->compat, len); + } + if (match) + return matches; + matches++; + } + return NULL; +} + +static int vio_bus_match(struct device *dev, struct device_driver *drv) +{ + struct vio_dev *vio_dev = to_vio_dev(dev); + struct vio_driver *vio_drv = to_vio_driver(drv); + const struct vio_device_id *matches = vio_drv->id_table; + + if (!matches) + return 0; + + return vio_match_device(matches, vio_dev) != NULL; +} + +static int vio_device_probe(struct device *dev) +{ + struct vio_dev *vdev = to_vio_dev(dev); + struct vio_driver *drv = to_vio_driver(dev->driver); + const struct vio_device_id *id; + int error = -ENODEV; + + if (drv->probe) { + id = vio_match_device(drv->id_table, vdev); + if (id) + error = drv->probe(vdev, id); + } + + return error; +} + +static int vio_device_remove(struct device *dev) +{ + struct vio_dev *vdev = to_vio_dev(dev); + struct vio_driver *drv = to_vio_driver(dev->driver); + + if (drv->remove) + return drv->remove(vdev); + + return 1; +} + +static ssize_t devspec_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vio_dev *vdev = to_vio_dev(dev); + const char *str = "none"; + + if (!strcmp(vdev->type, "network")) + str = "vnet"; + else if (!strcmp(vdev->type, "block")) + str = "vdisk"; + + return sprintf(buf, "%s\n", str); +} + +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vio_dev *vdev = to_vio_dev(dev); + return sprintf(buf, "%s\n", vdev->type); +} + +static struct device_attribute vio_dev_attrs[] = { + __ATTR_RO(devspec), + __ATTR_RO(type), + __ATTR_NULL +}; + +static struct bus_type vio_bus_type = { + .name = "vio", + .dev_attrs = vio_dev_attrs, + .match = vio_bus_match, + .probe = vio_device_probe, + .remove = vio_device_remove, +}; + +int vio_register_driver(struct vio_driver *viodrv) +{ + viodrv->driver.bus = &vio_bus_type; + + return driver_register(&viodrv->driver); +} +EXPORT_SYMBOL(vio_register_driver); + +void vio_unregister_driver(struct vio_driver *viodrv) +{ + driver_unregister(&viodrv->driver); +} +EXPORT_SYMBOL(vio_unregister_driver); + +static void __devinit vio_dev_release(struct device *dev) +{ + kfree(to_vio_dev(dev)); +} + +static ssize_t +show_pciobppath_attr(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vio_dev *vdev; + struct device_node *dp; + + vdev = to_vio_dev(dev); + dp = vdev->dp; + + return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name); +} + +static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, + show_pciobppath_attr, NULL); + +struct device_node *cdev_node; + +static struct vio_dev *root_vdev; +static u64 cdev_cfg_handle; + +static void vio_fill_channel_info(struct mdesc_handle *hp, u64 mp, + struct vio_dev *vdev) +{ + u64 a; + + mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) { + const u64 *chan_id; + const u64 *irq; + u64 target; + + target = mdesc_arc_target(hp, a); + + irq = mdesc_get_property(hp, target, "tx-ino", NULL); + if (irq) + vdev->tx_irq = sun4v_build_virq(cdev_cfg_handle, *irq); + + irq = mdesc_get_property(hp, target, "rx-ino", NULL); + if (irq) + vdev->rx_irq = sun4v_build_virq(cdev_cfg_handle, *irq); + + chan_id = mdesc_get_property(hp, target, "id", NULL); + if (chan_id) + vdev->channel_id = *chan_id; + } +} + +static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp, + struct device *parent) +{ + const char *type, *compat; + struct device_node *dp; + struct vio_dev *vdev; + int err, tlen, clen; + + type = mdesc_get_property(hp, mp, "device-type", &tlen); + if (!type) { + type = mdesc_get_property(hp, mp, "name", &tlen); + if (!type) { + type = mdesc_node_name(hp, mp); + tlen = strlen(type) + 1; + } + } + if (tlen > VIO_MAX_TYPE_LEN) { + printk(KERN_ERR "VIO: Type string [%s] is too long.\n", + type); + return NULL; + } + + compat = mdesc_get_property(hp, mp, "device-type", &clen); + if (!compat) { + clen = 0; + } else if (clen > VIO_MAX_COMPAT_LEN) { + printk(KERN_ERR "VIO: Compat len %d for [%s] is too long.\n", + clen, type); + return NULL; + } + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) { + printk(KERN_ERR "VIO: Could not allocate vio_dev\n"); + return NULL; + } + + vdev->mp = mp; + memcpy(vdev->type, type, tlen); + if (compat) + memcpy(vdev->compat, compat, clen); + else + memset(vdev->compat, 0, sizeof(vdev->compat)); + vdev->compat_len = clen; + + vdev->channel_id = ~0UL; + vdev->tx_irq = ~0; + vdev->rx_irq = ~0; + + vio_fill_channel_info(hp, mp, vdev); + + snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%lx", mp); + vdev->dev.parent = parent; + vdev->dev.bus = &vio_bus_type; + vdev->dev.release = vio_dev_release; + + if (parent == NULL) { + dp = cdev_node; + } else if (to_vio_dev(parent) == root_vdev) { + dp = of_get_next_child(cdev_node, NULL); + while (dp) { + if (!strcmp(dp->type, type)) + break; + + dp = of_get_next_child(cdev_node, dp); + } + } else { + dp = to_vio_dev(parent)->dp; + } + vdev->dp = dp; + + err = device_register(&vdev->dev); + if (err) { + printk(KERN_ERR "VIO: Could not register device %s, err=%d\n", + vdev->dev.bus_id, err); + kfree(vdev); + return NULL; + } + if (vdev->dp) + err = sysfs_create_file(&vdev->dev.kobj, + &dev_attr_obppath.attr); + + return vdev; +} + +static void walk_tree(struct mdesc_handle *hp, u64 n, struct vio_dev *parent) +{ + u64 a; + + mdesc_for_each_arc(a, hp, n, MDESC_ARC_TYPE_FWD) { + struct vio_dev *vdev; + u64 target; + + target = mdesc_arc_target(hp, a); + vdev = vio_create_one(hp, target, &parent->dev); + if (vdev) + walk_tree(hp, target, vdev); + } +} + +static void create_devices(struct mdesc_handle *hp, u64 root) +{ + u64 mp; + + root_vdev = vio_create_one(hp, root, NULL); + if (!root_vdev) { + printk(KERN_ERR "VIO: Coult not create root device.\n"); + return; + } + + walk_tree(hp, root, root_vdev); + + /* Domain services is odd as it doesn't sit underneath the + * channel-devices node, so we plug it in manually. + */ + mp = mdesc_node_by_name(hp, MDESC_NODE_NULL, "domain-services"); + if (mp != MDESC_NODE_NULL) { + struct vio_dev *parent = vio_create_one(hp, mp, + &root_vdev->dev); + + if (parent) + walk_tree(hp, mp, parent); + } +} + +const char *channel_devices_node = "channel-devices"; +const char *channel_devices_compat = "SUNW,sun4v-channel-devices"; +const char *cfg_handle_prop = "cfg-handle"; + +static int __init vio_init(void) +{ + struct mdesc_handle *hp; + const char *compat; + const u64 *cfg_handle; + int err, len; + u64 root; + + err = bus_register(&vio_bus_type); + if (err) { + printk(KERN_ERR "VIO: Could not register bus type err=%d\n", + err); + return err; + } + + hp = mdesc_grab(); + if (!hp) + return 0; + + root = mdesc_node_by_name(hp, MDESC_NODE_NULL, channel_devices_node); + if (root == MDESC_NODE_NULL) { + printk(KERN_INFO "VIO: No channel-devices MDESC node.\n"); + mdesc_release(hp); + return 0; + } + + cdev_node = of_find_node_by_name(NULL, "channel-devices"); + err = -ENODEV; + if (!cdev_node) { + printk(KERN_INFO "VIO: No channel-devices OBP node.\n"); + goto out_release; + } + + compat = mdesc_get_property(hp, root, "compatible", &len); + if (!compat) { + printk(KERN_ERR "VIO: Channel devices lacks compatible " + "property\n"); + goto out_release; + } + if (!find_in_proplist(compat, channel_devices_compat, len)) { + printk(KERN_ERR "VIO: Channel devices node lacks (%s) " + "compat entry.\n", channel_devices_compat); + goto out_release; + } + + cfg_handle = mdesc_get_property(hp, root, cfg_handle_prop, NULL); + if (!cfg_handle) { + printk(KERN_ERR "VIO: Channel devices lacks %s property\n", + cfg_handle_prop); + goto out_release; + } + + cdev_cfg_handle = *cfg_handle; + + create_devices(hp, root); + + mdesc_release(hp); + + return 0; + +out_release: + mdesc_release(hp); + return err; +} + +postcore_initcall(vio_init); diff --git a/arch/sparc64/kernel/viohs.c b/arch/sparc64/kernel/viohs.c new file mode 100644 index 000000000000..15613add45d1 --- /dev/null +++ b/arch/sparc64/kernel/viohs.c @@ -0,0 +1,792 @@ +/* viohs.c: LDOM Virtual I/O handshake helper layer. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include <asm/ldc.h> +#include <asm/vio.h> + +int vio_ldc_send(struct vio_driver_state *vio, void *data, int len) +{ + int err, limit = 1000; + + err = -EINVAL; + while (limit-- > 0) { + err = ldc_write(vio->lp, data, len); + if (!err || (err != -EAGAIN)) + break; + udelay(1); + } + + return err; +} +EXPORT_SYMBOL(vio_ldc_send); + +static int send_ctrl(struct vio_driver_state *vio, + struct vio_msg_tag *tag, int len) +{ + tag->sid = vio_send_sid(vio); + return vio_ldc_send(vio, tag, len); +} + +static void init_tag(struct vio_msg_tag *tag, u8 type, u8 stype, u16 stype_env) +{ + tag->type = type; + tag->stype = stype; + tag->stype_env = stype_env; +} + +static int send_version(struct vio_driver_state *vio, u16 major, u16 minor) +{ + struct vio_ver_info pkt; + + vio->_local_sid = (u32) sched_clock(); + + memset(&pkt, 0, sizeof(pkt)); + init_tag(&pkt.tag, VIO_TYPE_CTRL, VIO_SUBTYPE_INFO, VIO_VER_INFO); + pkt.major = major; + pkt.minor = minor; + pkt.dev_class = vio->dev_class; + + viodbg(HS, "SEND VERSION INFO maj[%u] min[%u] devclass[%u]\n", + major, minor, vio->dev_class); + + return send_ctrl(vio, &pkt.tag, sizeof(pkt)); +} + +static int start_handshake(struct vio_driver_state *vio) +{ + int err; + + viodbg(HS, "START HANDSHAKE\n"); + + vio->hs_state = VIO_HS_INVALID; + + err = send_version(vio, + vio->ver_table[0].major, + vio->ver_table[0].minor); + if (err < 0) + return err; + + return 0; +} + +void vio_link_state_change(struct vio_driver_state *vio, int event) +{ + if (event == LDC_EVENT_UP) { + vio->hs_state = VIO_HS_INVALID; + + switch (vio->dev_class) { + case VDEV_NETWORK: + case VDEV_NETWORK_SWITCH: + vio->dr_state = (VIO_DR_STATE_TXREQ | + VIO_DR_STATE_RXREQ); + break; + + case VDEV_DISK: + vio->dr_state = VIO_DR_STATE_TXREQ; + break; + case VDEV_DISK_SERVER: + vio->dr_state = VIO_DR_STATE_RXREQ; + break; + } + start_handshake(vio); + } +} +EXPORT_SYMBOL(vio_link_state_change); + +static int handshake_failure(struct vio_driver_state *vio) +{ + struct vio_dring_state *dr; + + /* XXX Put policy here... Perhaps start a timer to fire + * XXX in 100 ms, which will bring the link up and retry + * XXX the handshake. + */ + + viodbg(HS, "HANDSHAKE FAILURE\n"); + + vio->dr_state &= ~(VIO_DR_STATE_TXREG | + VIO_DR_STATE_RXREG); + + dr = &vio->drings[VIO_DRIVER_RX_RING]; + memset(dr, 0, sizeof(*dr)); + + kfree(vio->desc_buf); + vio->desc_buf = NULL; + vio->desc_buf_len = 0; + + vio->hs_state = VIO_HS_INVALID; + + return -ECONNRESET; +} + +static int process_unknown(struct vio_driver_state *vio, void *arg) +{ + struct vio_msg_tag *pkt = arg; + + viodbg(HS, "UNKNOWN CONTROL [%02x:%02x:%04x:%08x]\n", + pkt->type, pkt->stype, pkt->stype_env, pkt->sid); + + printk(KERN_ERR "vio: ID[%lu] Resetting connection.\n", + vio->vdev->channel_id); + + ldc_disconnect(vio->lp); + + return -ECONNRESET; +} + +static int send_dreg(struct vio_driver_state *vio) +{ + struct vio_dring_state *dr = &vio->drings[VIO_DRIVER_TX_RING]; + union { + struct vio_dring_register pkt; + char all[sizeof(struct vio_dring_register) + + (sizeof(struct ldc_trans_cookie) * + dr->ncookies)]; + } u; + int i; + + memset(&u, 0, sizeof(u)); + init_tag(&u.pkt.tag, VIO_TYPE_CTRL, VIO_SUBTYPE_INFO, VIO_DRING_REG); + u.pkt.dring_ident = 0; + u.pkt.num_descr = dr->num_entries; + u.pkt.descr_size = dr->entry_size; + u.pkt.options = VIO_TX_DRING; + u.pkt.num_cookies = dr->ncookies; + + viodbg(HS, "SEND DRING_REG INFO ndesc[%u] dsz[%u] opt[0x%x] " + "ncookies[%u]\n", + u.pkt.num_descr, u.pkt.descr_size, u.pkt.options, + u.pkt.num_cookies); + + for (i = 0; i < dr->ncookies; i++) { + u.pkt.cookies[i] = dr->cookies[i]; + + viodbg(HS, "DRING COOKIE(%d) [%016llx:%016llx]\n", + i, + (unsigned long long) u.pkt.cookies[i].cookie_addr, + (unsigned long long) u.pkt.cookies[i].cookie_size); + } + + return send_ctrl(vio, &u.pkt.tag, sizeof(u)); +} + +static int send_rdx(struct vio_driver_state *vio) +{ + struct vio_rdx pkt; + + memset(&pkt, 0, sizeof(pkt)); + + init_tag(&pkt.tag, VIO_TYPE_CTRL, VIO_SUBTYPE_INFO, VIO_RDX); + + viodbg(HS, "SEND RDX INFO\n"); + + return send_ctrl(vio, &pkt.tag, sizeof(pkt)); +} + +static int send_attr(struct vio_driver_state *vio) +{ + return vio->ops->send_attr(vio); +} + +static struct vio_version *find_by_major(struct vio_driver_state *vio, + u16 major) +{ + struct vio_version *ret = NULL; + int i; + + for (i = 0; i < vio->ver_table_entries; i++) { + struct vio_version *v = &vio->ver_table[i]; + if (v->major <= major) { + ret = v; + break; + } + } + return ret; +} + +static int process_ver_info(struct vio_driver_state *vio, + struct vio_ver_info *pkt) +{ + struct vio_version *vap; + int err; + + viodbg(HS, "GOT VERSION INFO maj[%u] min[%u] devclass[%u]\n", + pkt->major, pkt->minor, pkt->dev_class); + + if (vio->hs_state != VIO_HS_INVALID) { + /* XXX Perhaps invoke start_handshake? XXX */ + memset(&vio->ver, 0, sizeof(vio->ver)); + vio->hs_state = VIO_HS_INVALID; + } + + vap = find_by_major(vio, pkt->major); + + vio->_peer_sid = pkt->tag.sid; + + if (!vap) { + pkt->tag.stype = VIO_SUBTYPE_NACK; + pkt->major = 0; + pkt->minor = 0; + viodbg(HS, "SEND VERSION NACK maj[0] min[0]\n"); + err = send_ctrl(vio, &pkt->tag, sizeof(*pkt)); + } else if (vap->major != pkt->major) { + pkt->tag.stype = VIO_SUBTYPE_NACK; + pkt->major = vap->major; + pkt->minor = vap->minor; + viodbg(HS, "SEND VERSION NACK maj[%u] min[%u]\n", + pkt->major, pkt->minor); + err = send_ctrl(vio, &pkt->tag, sizeof(*pkt)); + } else { + struct vio_version ver = { + .major = pkt->major, + .minor = pkt->minor, + }; + if (ver.minor > vap->minor) + ver.minor = vap->minor; + pkt->minor = ver.minor; + pkt->tag.stype = VIO_SUBTYPE_ACK; + viodbg(HS, "SEND VERSION ACK maj[%u] min[%u]\n", + pkt->major, pkt->minor); + err = send_ctrl(vio, &pkt->tag, sizeof(*pkt)); + if (err > 0) { + vio->ver = ver; + vio->hs_state = VIO_HS_GOTVERS; + } + } + if (err < 0) + return handshake_failure(vio); + + return 0; +} + +static int process_ver_ack(struct vio_driver_state *vio, + struct vio_ver_info *pkt) +{ + viodbg(HS, "GOT VERSION ACK maj[%u] min[%u] devclass[%u]\n", + pkt->major, pkt->minor, pkt->dev_class); + + if (vio->hs_state & VIO_HS_GOTVERS) { + if (vio->ver.major != pkt->major || + vio->ver.minor != pkt->minor) { + pkt->tag.stype = VIO_SUBTYPE_NACK; + (void) send_ctrl(vio, &pkt->tag, sizeof(*pkt)); + return handshake_failure(vio); + } + } else { + vio->ver.major = pkt->major; + vio->ver.minor = pkt->minor; + vio->hs_state = VIO_HS_GOTVERS; + } + + switch (vio->dev_class) { + case VDEV_NETWORK: + case VDEV_DISK: + if (send_attr(vio) < 0) + return handshake_failure(vio); + break; + + default: + break; + } + + return 0; +} + +static int process_ver_nack(struct vio_driver_state *vio, + struct vio_ver_info *pkt) +{ + struct vio_version *nver; + + viodbg(HS, "GOT VERSION NACK maj[%u] min[%u] devclass[%u]\n", + pkt->major, pkt->minor, pkt->dev_class); + + if ((pkt->major == 0 && pkt->minor == 0) || + !(nver = find_by_major(vio, pkt->major))) + return handshake_failure(vio); + + if (send_version(vio, nver->major, nver->minor) < 0) + return handshake_failure(vio); + + return 0; +} + +static int process_ver(struct vio_driver_state *vio, struct vio_ver_info *pkt) +{ + switch (pkt->tag.stype) { + case VIO_SUBTYPE_INFO: + return process_ver_info(vio, pkt); + + case VIO_SUBTYPE_ACK: + return process_ver_ack(vio, pkt); + + case VIO_SUBTYPE_NACK: + return process_ver_nack(vio, pkt); + + default: + return handshake_failure(vio); + }; +} + +static int process_attr(struct vio_driver_state *vio, void *pkt) +{ + int err; + + if (!(vio->hs_state & VIO_HS_GOTVERS)) + return handshake_failure(vio); + + err = vio->ops->handle_attr(vio, pkt); + if (err < 0) { + return handshake_failure(vio); + } else { + vio->hs_state |= VIO_HS_GOT_ATTR; + + if ((vio->dr_state & VIO_DR_STATE_TXREQ) && + !(vio->hs_state & VIO_HS_SENT_DREG)) { + if (send_dreg(vio) < 0) + return handshake_failure(vio); + + vio->hs_state |= VIO_HS_SENT_DREG; + } + } + return 0; +} + +static int all_drings_registered(struct vio_driver_state *vio) +{ + int need_rx, need_tx; + + need_rx = (vio->dr_state & VIO_DR_STATE_RXREQ); + need_tx = (vio->dr_state & VIO_DR_STATE_TXREQ); + + if (need_rx && + !(vio->dr_state & VIO_DR_STATE_RXREG)) + return 0; + + if (need_tx && + !(vio->dr_state & VIO_DR_STATE_TXREG)) + return 0; + + return 1; +} + +static int process_dreg_info(struct vio_driver_state *vio, + struct vio_dring_register *pkt) +{ + struct vio_dring_state *dr; + int i, len; + + viodbg(HS, "GOT DRING_REG INFO ident[%llx] " + "ndesc[%u] dsz[%u] opt[0x%x] ncookies[%u]\n", + (unsigned long long) pkt->dring_ident, + pkt->num_descr, pkt->descr_size, pkt->options, + pkt->num_cookies); + + if (!(vio->dr_state & VIO_DR_STATE_RXREQ)) + goto send_nack; + + if (vio->dr_state & VIO_DR_STATE_RXREG) + goto send_nack; + + vio->desc_buf = kzalloc(pkt->descr_size, GFP_ATOMIC); + if (!vio->desc_buf) + goto send_nack; + + vio->desc_buf_len = pkt->descr_size; + + dr = &vio->drings[VIO_DRIVER_RX_RING]; + + dr->num_entries = pkt->num_descr; + dr->entry_size = pkt->descr_size; + dr->ncookies = pkt->num_cookies; + for (i = 0; i < dr->ncookies; i++) { + dr->cookies[i] = pkt->cookies[i]; + + viodbg(HS, "DRING COOKIE(%d) [%016llx:%016llx]\n", + i, + (unsigned long long) + pkt->cookies[i].cookie_addr, + (unsigned long long) + pkt->cookies[i].cookie_size); + } + + pkt->tag.stype = VIO_SUBTYPE_ACK; + pkt->dring_ident = ++dr->ident; + + viodbg(HS, "SEND DRING_REG ACK ident[%llx]\n", + (unsigned long long) pkt->dring_ident); + + len = (sizeof(*pkt) + + (dr->ncookies * sizeof(struct ldc_trans_cookie))); + if (send_ctrl(vio, &pkt->tag, len) < 0) + goto send_nack; + + vio->dr_state |= VIO_DR_STATE_RXREG; + + return 0; + +send_nack: + pkt->tag.stype = VIO_SUBTYPE_NACK; + viodbg(HS, "SEND DRING_REG NACK\n"); + (void) send_ctrl(vio, &pkt->tag, sizeof(*pkt)); + + return handshake_failure(vio); +} + +static int process_dreg_ack(struct vio_driver_state *vio, + struct vio_dring_register *pkt) +{ + struct vio_dring_state *dr; + + viodbg(HS, "GOT DRING_REG ACK ident[%llx] " + "ndesc[%u] dsz[%u] opt[0x%x] ncookies[%u]\n", + (unsigned long long) pkt->dring_ident, + pkt->num_descr, pkt->descr_size, pkt->options, + pkt->num_cookies); + + dr = &vio->drings[VIO_DRIVER_TX_RING]; + + if (!(vio->dr_state & VIO_DR_STATE_TXREQ)) + return handshake_failure(vio); + + dr->ident = pkt->dring_ident; + vio->dr_state |= VIO_DR_STATE_TXREG; + + if (all_drings_registered(vio)) { + if (send_rdx(vio) < 0) + return handshake_failure(vio); + vio->hs_state = VIO_HS_SENT_RDX; + } + return 0; +} + +static int process_dreg_nack(struct vio_driver_state *vio, + struct vio_dring_register *pkt) +{ + viodbg(HS, "GOT DRING_REG NACK ident[%llx] " + "ndesc[%u] dsz[%u] opt[0x%x] ncookies[%u]\n", + (unsigned long long) pkt->dring_ident, + pkt->num_descr, pkt->descr_size, pkt->options, + pkt->num_cookies); + + return handshake_failure(vio); +} + +static int process_dreg(struct vio_driver_state *vio, + struct vio_dring_register *pkt) +{ + if (!(vio->hs_state & VIO_HS_GOTVERS)) + return handshake_failure(vio); + + switch (pkt->tag.stype) { + case VIO_SUBTYPE_INFO: + return process_dreg_info(vio, pkt); + + case VIO_SUBTYPE_ACK: + return process_dreg_ack(vio, pkt); + + case VIO_SUBTYPE_NACK: + return process_dreg_nack(vio, pkt); + + default: + return handshake_failure(vio); + } +} + +static int process_dunreg(struct vio_driver_state *vio, + struct vio_dring_unregister *pkt) +{ + struct vio_dring_state *dr = &vio->drings[VIO_DRIVER_RX_RING]; + + viodbg(HS, "GOT DRING_UNREG\n"); + + if (pkt->dring_ident != dr->ident) + return 0; + + vio->dr_state &= ~VIO_DR_STATE_RXREG; + + memset(dr, 0, sizeof(*dr)); + + kfree(vio->desc_buf); + vio->desc_buf = NULL; + vio->desc_buf_len = 0; + + return 0; +} + +static int process_rdx_info(struct vio_driver_state *vio, struct vio_rdx *pkt) +{ + viodbg(HS, "GOT RDX INFO\n"); + + pkt->tag.stype = VIO_SUBTYPE_ACK; + viodbg(HS, "SEND RDX ACK\n"); + if (send_ctrl(vio, &pkt->tag, sizeof(*pkt)) < 0) + return handshake_failure(vio); + + vio->hs_state |= VIO_HS_SENT_RDX_ACK; + return 0; +} + +static int process_rdx_ack(struct vio_driver_state *vio, struct vio_rdx *pkt) +{ + viodbg(HS, "GOT RDX ACK\n"); + + if (!(vio->hs_state & VIO_HS_SENT_RDX)) + return handshake_failure(vio); + + vio->hs_state |= VIO_HS_GOT_RDX_ACK; + return 0; +} + +static int process_rdx_nack(struct vio_driver_state *vio, struct vio_rdx *pkt) +{ + viodbg(HS, "GOT RDX NACK\n"); + + return handshake_failure(vio); +} + +static int process_rdx(struct vio_driver_state *vio, struct vio_rdx *pkt) +{ + if (!all_drings_registered(vio)) + handshake_failure(vio); + + switch (pkt->tag.stype) { + case VIO_SUBTYPE_INFO: + return process_rdx_info(vio, pkt); + + case VIO_SUBTYPE_ACK: + return process_rdx_ack(vio, pkt); + + case VIO_SUBTYPE_NACK: + return process_rdx_nack(vio, pkt); + + default: + return handshake_failure(vio); + } +} + +int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt) +{ + struct vio_msg_tag *tag = pkt; + u8 prev_state = vio->hs_state; + int err; + + switch (tag->stype_env) { + case VIO_VER_INFO: + err = process_ver(vio, pkt); + break; + + case VIO_ATTR_INFO: + err = process_attr(vio, pkt); + break; + + case VIO_DRING_REG: + err = process_dreg(vio, pkt); + break; + + case VIO_DRING_UNREG: + err = process_dunreg(vio, pkt); + break; + + case VIO_RDX: + err = process_rdx(vio, pkt); + break; + + default: + err = process_unknown(vio, pkt); + break; + } + if (!err && + vio->hs_state != prev_state && + (vio->hs_state & VIO_HS_COMPLETE)) + vio->ops->handshake_complete(vio); + + return err; +} +EXPORT_SYMBOL(vio_control_pkt_engine); + +void vio_conn_reset(struct vio_driver_state *vio) +{ +} +EXPORT_SYMBOL(vio_conn_reset); + +/* The issue is that the Solaris virtual disk server just mirrors the + * SID values it gets from the client peer. So we work around that + * here in vio_{validate,send}_sid() so that the drivers don't need + * to be aware of this crap. + */ +int vio_validate_sid(struct vio_driver_state *vio, struct vio_msg_tag *tp) +{ + u32 sid; + + /* Always let VERSION+INFO packets through unchecked, they + * define the new SID. + */ + if (tp->type == VIO_TYPE_CTRL && + tp->stype == VIO_SUBTYPE_INFO && + tp->stype_env == VIO_VER_INFO) + return 0; + + /* Ok, now figure out which SID to use. */ + switch (vio->dev_class) { + case VDEV_NETWORK: + case VDEV_NETWORK_SWITCH: + case VDEV_DISK_SERVER: + default: + sid = vio->_peer_sid; + break; + + case VDEV_DISK: + sid = vio->_local_sid; + break; + } + + if (sid == tp->sid) + return 0; + viodbg(DATA, "BAD SID tag->sid[%08x] peer_sid[%08x] local_sid[%08x]\n", + tp->sid, vio->_peer_sid, vio->_local_sid); + return -EINVAL; +} +EXPORT_SYMBOL(vio_validate_sid); + +u32 vio_send_sid(struct vio_driver_state *vio) +{ + switch (vio->dev_class) { + case VDEV_NETWORK: + case VDEV_NETWORK_SWITCH: + case VDEV_DISK: + default: + return vio->_local_sid; + + case VDEV_DISK_SERVER: + return vio->_peer_sid; + } +} +EXPORT_SYMBOL(vio_send_sid); + +extern int vio_ldc_alloc(struct vio_driver_state *vio, + struct ldc_channel_config *base_cfg, + void *event_arg) +{ + struct ldc_channel_config cfg = *base_cfg; + struct ldc_channel *lp; + + cfg.tx_irq = vio->vdev->tx_irq; + cfg.rx_irq = vio->vdev->rx_irq; + + lp = ldc_alloc(vio->vdev->channel_id, &cfg, event_arg); + if (IS_ERR(lp)) + return PTR_ERR(lp); + + vio->lp = lp; + + return 0; +} +EXPORT_SYMBOL(vio_ldc_alloc); + +void vio_ldc_free(struct vio_driver_state *vio) +{ + ldc_free(vio->lp); + vio->lp = NULL; + + kfree(vio->desc_buf); + vio->desc_buf = NULL; + vio->desc_buf_len = 0; +} +EXPORT_SYMBOL(vio_ldc_free); + +void vio_port_up(struct vio_driver_state *vio) +{ + unsigned long flags; + int err, state; + + spin_lock_irqsave(&vio->lock, flags); + + state = ldc_state(vio->lp); + + err = 0; + if (state == LDC_STATE_INIT) { + err = ldc_bind(vio->lp, vio->name); + if (err) + printk(KERN_WARNING "%s: Port %lu bind failed, " + "err=%d\n", + vio->name, vio->vdev->channel_id, err); + } + + if (!err) { + err = ldc_connect(vio->lp); + if (err) + printk(KERN_WARNING "%s: Port %lu connect failed, " + "err=%d\n", + vio->name, vio->vdev->channel_id, err); + } + if (err) { + unsigned long expires = jiffies + HZ; + + expires = round_jiffies(expires); + mod_timer(&vio->timer, expires); + } + + spin_unlock_irqrestore(&vio->lock, flags); +} +EXPORT_SYMBOL(vio_port_up); + +static void vio_port_timer(unsigned long _arg) +{ + struct vio_driver_state *vio = (struct vio_driver_state *) _arg; + + vio_port_up(vio); +} + +int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev, + u8 dev_class, struct vio_version *ver_table, + int ver_table_size, struct vio_driver_ops *ops, + char *name) +{ + switch (dev_class) { + case VDEV_NETWORK: + case VDEV_NETWORK_SWITCH: + case VDEV_DISK: + case VDEV_DISK_SERVER: + break; + + default: + return -EINVAL; + } + + if (!ops->send_attr || + !ops->handle_attr || + !ops->handshake_complete) + return -EINVAL; + + if (!ver_table || ver_table_size < 0) + return -EINVAL; + + if (!name) + return -EINVAL; + + spin_lock_init(&vio->lock); + + vio->name = name; + + vio->dev_class = dev_class; + vio->vdev = vdev; + + vio->ver_table = ver_table; + vio->ver_table_entries = ver_table_size; + + vio->ops = ops; + + setup_timer(&vio->timer, vio_port_timer, (unsigned long) vio); + + return 0; +} +EXPORT_SYMBOL(vio_driver_init); diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 4a725d8985f1..c4a6d6e7d03c 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -14,6 +14,6 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ NGpage.o NGbzero.o \ copy_in_user.o user_fixup.o memmove.o \ - mcount.o ipcsum.o rwsem.o xor.o delay.o + mcount.o ipcsum.o rwsem.o xor.o obj-y += iomap.o diff --git a/arch/sparc64/lib/delay.c b/arch/sparc64/lib/delay.c deleted file mode 100644 index fb27e54a03ee..000000000000 --- a/arch/sparc64/lib/delay.c +++ /dev/null @@ -1,46 +0,0 @@ -/* delay.c: Delay loops for sparc64 - * - * Copyright (C) 2004, 2006 David S. Miller <davem@davemloft.net> - * - * Based heavily upon x86 variant which is: - * Copyright (C) 1993 Linus Torvalds - * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz> - */ - -#include <linux/delay.h> -#include <asm/timer.h> - -void __delay(unsigned long loops) -{ - unsigned long bclock, now; - - bclock = tick_ops->get_tick(); - do { - now = tick_ops->get_tick(); - } while ((now-bclock) < loops); -} - -/* We used to multiply by HZ after shifting down by 32 bits - * but that runs into problems for higher values of HZ and - * slow cpus. - */ -void __const_udelay(unsigned long n) -{ - n *= 4; - - n *= (cpu_data(raw_smp_processor_id()).udelay_val * (HZ/4)); - n >>= 32; - - __delay(n + 1); -} - -void __udelay(unsigned long n) -{ - __const_udelay(n * 0x10c7UL); -} - - -void __ndelay(unsigned long n) -{ - __const_udelay(n * 0x5UL); -} diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index f3e0c14e9eef..33c5b7da31e5 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -14,6 +14,7 @@ #include <asm/openprom.h> #include <asm/oplib.h> #include <asm/system.h> +#include <asm/ldc.h> int prom_service_exists(const char *service_name) { @@ -37,6 +38,10 @@ void prom_sun4v_guest_soft_state(void) /* Reset and reboot the machine with the command 'bcommand'. */ void prom_reboot(const char *bcommand) { +#ifdef CONFIG_SUN_LDOMS + if (ldom_domaining_enabled) + ldom_reboot(bcommand); +#endif p1275_cmd("boot", P1275_ARG(0, P1275_ARG_IN_STRING) | P1275_INOUT(1, 0), bcommand); } @@ -91,6 +96,10 @@ void prom_cmdline(void) */ void prom_halt(void) { +#ifdef CONFIG_SUN_LDOMS + if (ldom_domaining_enabled) + ldom_power_off(); +#endif again: p1275_cmd("exit", P1275_INOUT(0, 0)); goto again; /* PROM is out to get me -DaveM */ @@ -98,6 +107,10 @@ again: void prom_halt_power_off(void) { +#ifdef CONFIG_SUN_LDOMS + if (ldom_domaining_enabled) + ldom_power_off(); +#endif p1275_cmd("SUNW,power-off", P1275_INOUT(0, 0)); /* if nothing else helps, we just halt */ diff --git a/arch/sparc64/prom/p1275.c b/arch/sparc64/prom/p1275.c index 2b32c489860c..7fcccc0e19cf 100644 --- a/arch/sparc64/prom/p1275.c +++ b/arch/sparc64/prom/p1275.c @@ -16,6 +16,7 @@ #include <asm/system.h> #include <asm/spitfire.h> #include <asm/pstate.h> +#include <asm/ldc.h> struct { long prom_callback; /* 0x00 */ diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c index 500f05e2cfcb..17b7ecfe7ca9 100644 --- a/arch/sparc64/prom/tree.c +++ b/arch/sparc64/prom/tree.c @@ -13,6 +13,7 @@ #include <asm/openprom.h> #include <asm/oplib.h> +#include <asm/ldc.h> /* Return the child of node 'node' or zero if no this node has no * direct descendent. @@ -261,9 +262,17 @@ int prom_node_has_property(int node, const char *prop) int prom_setprop(int node, const char *pname, char *value, int size) { - if(size == 0) return 0; - if((pname == 0) || (value == 0)) return 0; + if (size == 0) + return 0; + if ((pname == 0) || (value == 0)) + return 0; +#ifdef CONFIG_SUN_LDOMS + if (ldom_domaining_enabled) { + ldom_set_var(pname, value); + return 0; + } +#endif return p1275_cmd ("setprop", P1275_ARG(1,P1275_ARG_IN_STRING)| P1275_ARG(2,P1275_ARG_IN_BUF)| P1275_INOUT(4, 1), diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index 09c1aca6339f..c86f5eb29fd5 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -47,4 +47,13 @@ config GCOV If you're involved in UML kernel development and want to use gcov, say Y. If you're unsure, say N. +config DEBUG_STACK_USAGE + bool "Stack utilization instrumentation" + default N + help + Track the maximum kernel stack usage - this will look at each + kernel stack at process exit and log it if it's the deepest + stack seen so far. + + This option will slow down process creation and destruction somewhat. endmenu diff --git a/arch/um/config.release b/arch/um/config.release deleted file mode 100644 index fc68bcb9294e..000000000000 --- a/arch/um/config.release +++ /dev/null @@ -1,333 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_USERMODE=y -# CONFIG_ISA is not set -# CONFIG_SBUS is not set -# CONFIG_PCI is not set -CONFIG_UID16=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General Setup -# -CONFIG_STDIO_CONSOLE=y -CONFIG_NET=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_SSL=y -CONFIG_HOSTFS=y -CONFIG_MCONSOLE=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_HOST_2G_2G is not set -# CONFIG_UML_SMP is not set -# CONFIG_SMP is not set -CONFIG_CON_ZERO_CHAN="fd:0,fd:1" -CONFIG_CON_CHAN="xterm" -CONFIG_SSL_CHAN="pty" -CONFIG_NEST_LEVEL=0 -CONFIG_KERNEL_HALF_GIGS=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_KMOD=y - -# -# Devices -# -CONFIG_BLK_DEV_UBD=y -# CONFIG_BLK_DEV_UBD_SYNC is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_MMAPPER is not set -CONFIG_UML_SOUND=y -CONFIG_SOUND=y -CONFIG_HOSTAUDIO=y -# CONFIG_UML_WATCHDOG is not set -# CONFIG_TTY_LOG is not set -CONFIG_FD_CHAN=y -# CONFIG_NULL_CHAN is not set -CONFIG_PORT_CHAN=y -CONFIG_PTY_CHAN=y -CONFIG_TTY_CHAN=y -CONFIG_XTERM_CHAN=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_IPV6 is not set -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network device support -# -CONFIG_UML_NET=y -CONFIG_UML_NET_ETHERTAP=y -CONFIG_UML_NET_TUNTAP=y -CONFIG_UML_NET_SLIP=y -CONFIG_UML_NET_DAEMON=y -CONFIG_UML_NET_MCAST=y -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=y -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=y -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_MYRI_SBUS is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_SK98LIN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -# CONFIG_PPP_ASYNC is not set -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -CONFIG_SHAPER=m - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# File systems -# -CONFIG_QUOTA=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_UMSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=m -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -CONFIG_SUNRPC=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -# CONFIG_SMB_FS is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set -CONFIG_ZLIB_FS_INFLATE=m - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_SMB_NLS is not set -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_BLK_DEV_LVM is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_PT_PROXY is not set -# CONFIG_GPROF is not set -# CONFIG_GCOV is not set diff --git a/arch/um/defconfig b/arch/um/defconfig index a54d0efecae1..a25cd25d55d4 100644 --- a/arch/um/defconfig +++ b/arch/um/defconfig @@ -189,7 +189,7 @@ CONFIG_XTERM_CHAN=y # CONFIG_NOCONFIG_CHAN is not set CONFIG_CON_ZERO_CHAN="fd:0,fd:1" CONFIG_CON_CHAN="xterm" -CONFIG_SSL_CHAN="pty" +CONFIG_SSL_CHAN="pts" CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -527,3 +527,4 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_GPROF is not set # CONFIG_GCOV is not set +# CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 3aa351611763..368d3e97dfd9 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -203,22 +203,37 @@ void chan_enable_winch(struct list_head *chans, struct tty_struct *tty) } } -void enable_chan(struct line *line) +int enable_chan(struct line *line) { struct list_head *ele; struct chan *chan; + int err; list_for_each(ele, &line->chan_list){ chan = list_entry(ele, struct chan, list); - if(open_one_chan(chan)) + err = open_one_chan(chan); + if (err) { + if (chan->primary) + goto out_close; + continue; + } if(chan->enabled) continue; - line_setup_irq(chan->fd, chan->input, chan->output, line, - chan); + err = line_setup_irq(chan->fd, chan->input, chan->output, line, + chan); + if (err) + goto out_close; + chan->enabled = 1; } + + return 0; + + out_close: + close_chan(&line->chan_list, 0); + return err; } /* Items are added in IRQ context, when free_irq can't be called, and diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 13f0bf852b2a..4d438f36ea2e 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -51,19 +51,21 @@ error: /* * UML SIGWINCH handling * - * The point of this is to handle SIGWINCH on consoles which have host ttys and - * relay them inside UML to whatever might be running on the console and cares - * about the window size (since SIGWINCH notifies about terminal size changes). + * The point of this is to handle SIGWINCH on consoles which have host + * ttys and relay them inside UML to whatever might be running on the + * console and cares about the window size (since SIGWINCH notifies + * about terminal size changes). * - * So, we have a separate thread for each host tty attached to a UML device - * (side-issue - I'm annoyed that one thread can't have multiple controlling - * ttys for purposed of handling SIGWINCH, but I imagine there are other reasons - * that doesn't make any sense). + * So, we have a separate thread for each host tty attached to a UML + * device (side-issue - I'm annoyed that one thread can't have + * multiple controlling ttys for the purpose of handling SIGWINCH, but + * I imagine there are other reasons that doesn't make any sense). * - * SIGWINCH can't be received synchronously, so you have to set up to receive it - * as a signal. That being the case, if you are going to wait for it, it is - * convenient to sit in sigsuspend() and wait for the signal to bounce you out of - * it (see below for how we make sure to exit only on SIGWINCH). + * SIGWINCH can't be received synchronously, so you have to set up to + * receive it as a signal. That being the case, if you are going to + * wait for it, it is convenient to sit in sigsuspend() and wait for + * the signal to bounce you out of it (see below for how we make sure + * to exit only on SIGWINCH). */ static void winch_handler(int sig) @@ -112,7 +114,8 @@ static int winch_thread(void *arg) err = os_new_tty_pgrp(pty_fd, os_getpid()); if(err < 0){ - printk("winch_thread : new_tty_pgrp failed, err = %d\n", -err); + printk("winch_thread : new_tty_pgrp failed on fd %d, " + "err = %d\n", pty_fd, -err); exit(1); } @@ -126,8 +129,9 @@ static int winch_thread(void *arg) "err = %d\n", -count); while(1){ - /* This will be interrupted by SIGWINCH only, since other signals - * are blocked.*/ + /* This will be interrupted by SIGWINCH only, since + * other signals are blocked. + */ sigsuspend(&sigs); count = os_write_file(pipe_fd, &c, sizeof(c)); @@ -137,10 +141,10 @@ static int winch_thread(void *arg) } } -static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) +static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out, + unsigned long *stack_out) { struct winch_data data; - unsigned long stack; int fds[2], n, err; char c; @@ -153,9 +157,11 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) data = ((struct winch_data) { .pty_fd = fd, .pipe_fd = fds[1] } ); /* CLONE_FILES so this thread doesn't hold open files which are open - * now, but later closed. This is a problem with /dev/net/tun. + * now, but later closed in a different thread. This is a + * problem with /dev/net/tun, which if held open by this + * thread, prevents the TUN/TAP device from being reused. */ - err = run_helper_thread(winch_thread, &data, CLONE_FILES, &stack, 0); + err = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out); if(err < 0){ printk("fork of winch_thread failed - errno = %d\n", -err); goto out_close; @@ -170,7 +176,13 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) err = -EINVAL; goto out_close; } - return err ; + + if (os_set_fd_block(*fd_out, 0)) { + printk("winch_tramp: failed to set thread_fd non-blocking.\n"); + goto out_close; + } + + return err; out_close: os_close_file(fds[1]); @@ -181,25 +193,25 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) void register_winch(int fd, struct tty_struct *tty) { - int pid, thread, thread_fd = -1; - int count; + unsigned long stack; + int pid, thread, count, thread_fd = -1; char c = 1; if(!isatty(fd)) return; pid = tcgetpgrp(fd); - if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd, - tty) && (pid == -1)){ - thread = winch_tramp(fd, tty, &thread_fd); - if(thread > 0){ - register_winch_irq(thread_fd, fd, thread, tty); - - count = os_write_file(thread_fd, &c, sizeof(c)); - if(count != sizeof(c)) - printk("register_winch : failed to write " - "synchronization byte, err = %d\n", - -count); - } + if (!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd, tty) && + (pid == -1)) { + thread = winch_tramp(fd, tty, &thread_fd, &stack); + if (thread < 0) + return; + + register_winch_irq(thread_fd, fd, thread, tty, stack); + + count = os_write_file(thread_fd, &c, sizeof(c)); + if(count != sizeof(c)) + printk("register_winch : failed to write " + "synchronization byte, err = %d\n", -count); } } diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h index 15453845d2ba..ca8c9e11a39b 100644 --- a/arch/um/drivers/cow_sys.h +++ b/arch/um/drivers/cow_sys.h @@ -8,7 +8,7 @@ static inline void *cow_malloc(int size) { - return um_kmalloc(size); + return kmalloc(size, UM_GFP_KERNEL); } static inline void cow_free(void *ptr) diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c index b869e3899683..8d2008f06682 100644 --- a/arch/um/drivers/daemon_user.c +++ b/arch/um/drivers/daemon_user.c @@ -35,7 +35,7 @@ static struct sockaddr_un *new_addr(void *name, int len) { struct sockaddr_un *sun; - sun = um_kmalloc(sizeof(struct sockaddr_un)); + sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL); if(sun == NULL){ printk("new_addr: allocation of sockaddr_un failed\n"); return NULL; @@ -83,7 +83,7 @@ static int connect_to_switch(struct daemon_data *pri) goto out_close; } - sun = um_kmalloc(sizeof(struct sockaddr_un)); + sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL); if(sun == NULL){ printk("new_addr: allocation of sockaddr_un failed\n"); err = -ENOMEM; diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c index 7f083ec47a4f..39c01ffd45c9 100644 --- a/arch/um/drivers/fd.c +++ b/arch/um/drivers/fd.c @@ -37,7 +37,7 @@ static void *fd_init(char *str, int device, const struct chan_opts *opts) printk("fd_init : couldn't parse file descriptor '%s'\n", str); return(NULL); } - data = um_kmalloc(sizeof(*data)); + data = kmalloc(sizeof(*data), UM_GFP_KERNEL); if(data == NULL) return(NULL); *data = ((struct fd_chan) { .fd = n, .raw = opts->raw }); diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index 5eeecf8917c3..1171790f742c 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -68,7 +68,7 @@ int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock) args = pid_args; } - pid = run_helper(pre_exec, &data, args, NULL); + pid = run_helper(pre_exec, &data, args); os_close_file(out_fds[0]); os_close_file(in_fds[1]); diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 4bd40bb43ec2..3e0b68e297f2 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -454,7 +454,10 @@ int line_open(struct line *lines, struct tty_struct *tty) tty->driver_data = line; line->tty = tty; - enable_chan(line); + err = enable_chan(line); + if (err) + return err; + INIT_DELAYED_WORK(&line->task, line_timer_cb); if(!line->sigio){ @@ -746,8 +749,24 @@ struct winch { int tty_fd; int pid; struct tty_struct *tty; + unsigned long stack; }; +static void free_winch(struct winch *winch, int free_irq_ok) +{ + list_del(&winch->list); + + if (winch->pid != -1) + os_kill_process(winch->pid, 1); + if (winch->fd != -1) + os_close_file(winch->fd); + if (winch->stack != 0) + free_stack(winch->stack, 0); + if (free_irq_ok) + free_irq(WINCH_IRQ, winch); + kfree(winch); +} + static irqreturn_t winch_interrupt(int irq, void *data) { struct winch *winch = data; @@ -764,12 +783,13 @@ static irqreturn_t winch_interrupt(int irq, void *data) "errno = %d\n", -err); printk("fd %d is losing SIGWINCH support\n", winch->tty_fd); + free_winch(winch, 0); return IRQ_HANDLED; } goto out; } } - tty = winch->tty; + tty = winch->tty; if (tty != NULL) { line = tty->driver_data; chan_window_size(&line->chan_list, &tty->winsize.ws_row, @@ -782,43 +802,44 @@ static irqreturn_t winch_interrupt(int irq, void *data) return IRQ_HANDLED; } -void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty) +void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty, + unsigned long stack) { struct winch *winch; winch = kmalloc(sizeof(*winch), GFP_KERNEL); if (winch == NULL) { printk("register_winch_irq - kmalloc failed\n"); - return; + goto cleanup; } *winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list), .fd = fd, .tty_fd = tty_fd, .pid = pid, - .tty = tty }); + .tty = tty, + .stack = stack }); + + if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, + IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, + "winch", winch) < 0) { + printk("register_winch_irq - failed to register IRQ\n"); + goto out_free; + } spin_lock(&winch_handler_lock); list_add(&winch->list, &winch_handlers); spin_unlock(&winch_handler_lock); - if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, - IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, - "winch", winch) < 0) - printk("register_winch_irq - failed to register IRQ\n"); -} - -static void free_winch(struct winch *winch) -{ - list_del(&winch->list); - - if(winch->pid != -1) - os_kill_process(winch->pid, 1); - if(winch->fd != -1) - os_close_file(winch->fd); + return; - free_irq(WINCH_IRQ, winch); + out_free: kfree(winch); + cleanup: + os_kill_process(pid, 1); + os_close_file(fd); + if (stack != 0) + free_stack(stack, 0); } static void unregister_winch(struct tty_struct *tty) @@ -831,7 +852,7 @@ static void unregister_winch(struct tty_struct *tty) list_for_each(ele, &winch_handlers){ winch = list_entry(ele, struct winch, list); if(winch->tty == tty){ - free_winch(winch); + free_winch(winch, 1); break; } } @@ -847,7 +868,7 @@ static void winch_cleanup(void) list_for_each_safe(ele, next, &winch_handlers){ winch = list_entry(ele, struct winch, list); - free_winch(winch); + free_winch(winch, 1); } spin_unlock(&winch_handler_lock); diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index d319db16d4ec..236a3dfc297d 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -30,7 +30,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port) { struct sockaddr_in *sin; - sin = um_kmalloc(sizeof(struct sockaddr_in)); + sin = kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL); if(sin == NULL){ printk("new_addr: allocation of sockaddr_in failed\n"); return NULL; diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c index 62e5ad63181a..f31e71546e52 100644 --- a/arch/um/drivers/mconsole_user.c +++ b/arch/um/drivers/mconsole_user.c @@ -86,8 +86,9 @@ int mconsole_get_request(int fd, struct mc_request *req) int len; req->originlen = sizeof(req->origin); - req->len = recvfrom(fd, &req->request, sizeof(req->request), 0, - (struct sockaddr *) req->origin, &req->originlen); + req->len = recvfrom(fd, &req->request, sizeof(req->request), + MSG_DONTWAIT, (struct sockaddr *) req->origin, + &req->originlen); if (req->len < 0) return 0; diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 3503cff867c3..da946e3e1bf2 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -187,7 +187,7 @@ static int change_tramp(char **argv, char *output, int output_len) } pe_data.close_me = fds[0]; pe_data.stdout = fds[1]; - pid = run_helper(change_pre_exec, &pe_data, argv, NULL); + pid = run_helper(change_pre_exec, &pe_data, argv); if (pid > 0) /* Avoid hang as we won't get data in failure case. */ read_output(fds[0], output, output_len); @@ -217,7 +217,7 @@ static void change(char *dev, char *what, unsigned char *addr, netmask[2], netmask[3]); output_len = UM_KERN_PAGE_SIZE; - output = um_kmalloc(output_len); + output = kmalloc(output_len, UM_GFP_KERNEL); if(output == NULL) printk("change : failed to allocate output buffer\n"); diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index 3f6357d24bee..c799b00012c7 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -50,7 +50,7 @@ static void *port_init(char *str, int device, const struct chan_opts *opts) if(kern_data == NULL) return NULL; - data = um_kmalloc(sizeof(*data)); + data = kmalloc(sizeof(*data), UM_GFP_KERNEL); if(data == NULL) goto err; @@ -188,7 +188,7 @@ int port_connection(int fd, int *socket, int *pid_out) { .sock_fd = new, .pipe_fd = socket[1] }); - err = run_helper(port_pre_exec, &data, argv, NULL); + err = run_helper(port_pre_exec, &data, argv); if(err < 0) goto out_shutdown; diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c index df4976c9eef2..1e3fd619a837 100644 --- a/arch/um/drivers/pty.c +++ b/arch/um/drivers/pty.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -7,12 +7,14 @@ #include <stdlib.h> #include <unistd.h> #include <string.h> +#include <fcntl.h> #include <errno.h> #include <termios.h> +#include <sys/stat.h> #include "chan_user.h" -#include "user.h" -#include "kern_util.h" #include "os.h" +#include "user.h" +#include "kern_constants.h" #include "um_malloc.h" struct pty_chan { @@ -27,12 +29,14 @@ static void *pty_chan_init(char *str, int device, const struct chan_opts *opts) { struct pty_chan *data; - data = um_kmalloc(sizeof(*data)); - if(data == NULL) return(NULL); + data = kmalloc(sizeof(*data), UM_GFP_KERNEL); + if (data == NULL) + return NULL; + *data = ((struct pty_chan) { .announce = opts->announce, .dev = device, .raw = opts->raw }); - return(data); + return data; } static int pts_open(int input, int output, int primary, void *d, @@ -43,31 +47,35 @@ static int pts_open(int input, int output, int primary, void *d, int fd, err; fd = get_pty(); - if(fd < 0){ + if (fd < 0) { err = -errno; - printk("open_pts : Failed to open pts\n"); + printk(UM_KERN_ERR "open_pts : Failed to open pts\n"); return err; } - if(data->raw){ + + if (data->raw) { CATCH_EINTR(err = tcgetattr(fd, &data->tt)); - if(err) - return(err); + if (err) + return err; err = raw(fd); - if(err) - return(err); + if (err) + return err; } dev = ptsname(fd); sprintf(data->dev_name, "%s", dev); *dev_out = data->dev_name; + if (data->announce) (*data->announce)(dev, data->dev); - return(fd); + + return fd; } static int getmaster(char *line) { + struct stat buf; char *pty, *bank, *cp; int master, err; @@ -75,24 +83,29 @@ static int getmaster(char *line) for (bank = "pqrs"; *bank; bank++) { line[strlen("/dev/pty")] = *bank; *pty = '0'; - if (os_stat_file(line, NULL) < 0) + /* Did we hit the end ? */ + if ((stat(line, &buf) < 0) && (errno == ENOENT)) break; + for (cp = "0123456789abcdef"; *cp; cp++) { *pty = *cp; - master = os_open_file(line, of_rdwr(OPENFLAGS()), 0); + master = open(line, O_RDWR); if (master >= 0) { char *tp = &line[strlen("/dev/")]; /* verify slave side is usable */ *tp = 't'; - err = os_access(line, OS_ACC_RW_OK); + err = access(line, R_OK | W_OK); *tp = 'p'; - if(err == 0) return(master); - (void) os_close_file(master); + if(!err) + return master; + close(master); } } } - return(-1); + + printk(UM_KERN_ERR "getmaster - no usable host pty devices\n"); + return -ENOENT; } static int pty_open(int input, int output, int primary, void *d, @@ -103,20 +116,22 @@ static int pty_open(int input, int output, int primary, void *d, char dev[sizeof("/dev/ptyxx\0")] = "/dev/ptyxx"; fd = getmaster(dev); - if(fd < 0) - return(-errno); + if (fd < 0) + return fd; if(data->raw){ err = raw(fd); - if(err) - return(err); + if (err) + return err; } - if(data->announce) (*data->announce)(dev, data->dev); + if (data->announce) + (*data->announce)(dev, data->dev); sprintf(data->dev_name, "%s", dev); *dev_out = data->dev_name; - return(fd); + + return fd; } const struct chan_ops pty_ops = { @@ -144,14 +159,3 @@ const struct chan_ops pts_ops = { .free = generic_free, .winch = 0, }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 78f0e515da8f..c0b73c28cff0 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -85,13 +85,13 @@ static int slip_tramp(char **argv, int fd) pe_data.stdin = fd; pe_data.stdout = fds[1]; pe_data.close_me = fds[0]; - err = run_helper(slip_pre_exec, &pe_data, argv, NULL); + err = run_helper(slip_pre_exec, &pe_data, argv); if(err < 0) goto out_close; pid = err; output_len = UM_KERN_PAGE_SIZE; - output = um_kmalloc(output_len); + output = kmalloc(output_len, UM_GFP_KERNEL); if(output == NULL){ printk("slip_tramp : failed to allocate output buffer\n"); os_kill_process(pid, 1); diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 39f889fe9949..0e462f64f227 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -42,7 +42,7 @@ static int slirp_tramp(char **argv, int fd) pe_data.stdin = fd; pe_data.stdout = fd; - pid = run_helper(slirp_pre_exec, &pe_data, argv, NULL); + pid = run_helper(slirp_pre_exec, &pe_data, argv); return(pid); } diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index fd09ad9e9c0a..875d60d0c6a2 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -42,8 +42,6 @@ static struct chan_opts opts = { .announce = ssl_announce, .xterm_title = "Serial Line #%d", .raw = 1, - .tramp_stack = 0, - .in_kernel = 1, }; static int ssl_config(char *str, char **error_out); @@ -99,7 +97,13 @@ static int ssl_remove(int n, char **error_out) static int ssl_open(struct tty_struct *tty, struct file *filp) { - return line_open(serial_lines, tty); + int err = line_open(serial_lines, tty); + + if (err) + printk(KERN_ERR "Failed to open serial line %d, err = %d\n", + tty->index, err); + + return err; } #if 0 diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 2bb4193ac1aa..656036e90b19 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -46,8 +46,6 @@ static struct chan_opts opts = { .announce = stdio_announce, .xterm_title = "Virtual Console #%d", .raw = 1, - .tramp_stack = 0, - .in_kernel = 1, }; static int con_config(char *str, char **error_out); @@ -101,7 +99,12 @@ static int con_remove(int n, char **error_out) static int con_open(struct tty_struct *tty, struct file *filp) { - return line_open(vts, tty); + int err = line_open(vts, tty); + if (err) + printk(KERN_ERR "Failed to open console %d, err = %d\n", + tty->index, err); + + return err; } /* Set in an initcall, checked in an exitcall */ diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c index c07d0d562780..a9f87e19c5bf 100644 --- a/arch/um/drivers/tty.c +++ b/arch/um/drivers/tty.c @@ -29,7 +29,7 @@ static void *tty_chan_init(char *str, int device, const struct chan_opts *opts) } str++; - data = um_kmalloc(sizeof(*data)); + data = kmalloc(sizeof(*data), UM_GFP_KERNEL); if(data == NULL) return NULL; *data = ((struct tty_chan) { .dev = str, diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 2e09f162c42f..fc27f6c72b41 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -712,6 +712,8 @@ static int ubd_add(int n, char **error_out) ubd_dev->queue->queuedata = ubd_dev; blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG); + if(ubd_dev->cow.file != NULL) + blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long)); err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]); if(err){ *error_out = "Failed to register device"; @@ -1083,7 +1085,7 @@ static void do_ubd_request(request_queue_t *q) { struct io_thread_req *io_req; struct request *req; - int n; + int n, last_sectors; while(1){ struct ubd *dev = q->queuedata; @@ -1099,9 +1101,11 @@ static void do_ubd_request(request_queue_t *q) } req = dev->request; + last_sectors = 0; while(dev->start_sg < dev->end_sg){ struct scatterlist *sg = &dev->sg[dev->start_sg]; + req->sector += last_sectors; io_req = kmalloc(sizeof(struct io_thread_req), GFP_ATOMIC); if(io_req == NULL){ @@ -1113,6 +1117,7 @@ static void do_ubd_request(request_queue_t *q) (unsigned long long) req->sector << 9, sg->offset, sg->length, sg->page); + last_sectors = sg->length >> 9; n = os_write_file(thread_fd, &io_req, sizeof(struct io_thread_req *)); if(n != sizeof(struct io_thread_req *)){ @@ -1124,7 +1129,6 @@ static void do_ubd_request(request_queue_t *q) return; } - req->sector += sg->length >> 9; dev->start_sg++; } dev->end_sg = 0; diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c index 4707b3f14c2f..41d254bd38df 100644 --- a/arch/um/drivers/ubd_user.c +++ b/arch/um/drivers/ubd_user.c @@ -43,6 +43,12 @@ int start_io_thread(unsigned long sp, int *fd_out) kernel_fd = fds[0]; *fd_out = fds[1]; + err = os_set_fd_block(*fd_out, 0); + if (err) { + printk("start_io_thread - failed to set nonblocking I/O.\n"); + goto out_close; + } + pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, NULL); if(pid < 0){ diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 571c2b3325d5..fd817e541543 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -1,22 +1,20 @@ /* - * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ -#include <stdio.h> #include <stdlib.h> +#include <stdio.h> #include <unistd.h> #include <string.h> #include <errno.h> #include <termios.h> -#include <signal.h> -#include <sched.h> -#include <sys/socket.h> -#include "kern_util.h" #include "chan_user.h" -#include "user.h" #include "os.h" +#include "init.h" +#include "user.h" #include "xterm.h" +#include "kern_constants.h" struct xterm_chan { int pid; @@ -25,25 +23,21 @@ struct xterm_chan { int device; int raw; struct termios tt; - unsigned long stack; - int direct_rcv; }; -/* Not static because it's called directly by the tt mode gdb code */ -void *xterm_init(char *str, int device, const struct chan_opts *opts) +static void *xterm_init(char *str, int device, const struct chan_opts *opts) { struct xterm_chan *data; data = malloc(sizeof(*data)); - if(data == NULL) return(NULL); - *data = ((struct xterm_chan) { .pid = -1, + if (data == NULL) + return NULL; + *data = ((struct xterm_chan) { .pid = -1, .helper_pid = -1, - .device = device, + .device = device, .title = opts->xterm_title, - .raw = opts->raw, - .stack = opts->tramp_stack, - .direct_rcv = !opts->in_kernel } ); - return(data); + .raw = opts->raw } ); + return data; } /* Only changed by xterm_setup, which is a setup */ @@ -57,16 +51,22 @@ static int __init xterm_setup(char *line, int *add) terminal_emulator = line; line = strchr(line, ','); - if(line == NULL) return(0); + if (line == NULL) + return 0; + *line++ = '\0'; - if(*line) title_switch = line; + if (*line) + title_switch = line; line = strchr(line, ','); - if(line == NULL) return(0); + if (line == NULL) + return 0; + *line++ = '\0'; - if(*line) exec_switch = line; + if (*line) + exec_switch = line; - return(0); + return 0; } __uml_setup("xterm=", xterm_setup, @@ -82,107 +82,128 @@ __uml_setup("xterm=", xterm_setup, " are 'xterm=gnome-terminal,-t,-x'.\n\n" ); -/* XXX This badly needs some cleaning up in the error paths - * Not static because it's called directly by the tt mode gdb code - */ -int xterm_open(int input, int output, int primary, void *d, +static int xterm_open(int input, int output, int primary, void *d, char **dev_out) { struct xterm_chan *data = d; - unsigned long stack; int pid, fd, new, err; char title[256], file[] = "/tmp/xterm-pipeXXXXXX"; - char *argv[] = { terminal_emulator, title_switch, title, exec_switch, + char *argv[] = { terminal_emulator, title_switch, title, exec_switch, "/usr/lib/uml/port-helper", "-uml-socket", file, NULL }; - if(os_access(argv[4], OS_ACC_X_OK) < 0) + if (access(argv[4], X_OK) < 0) argv[4] = "port-helper"; /* Check that DISPLAY is set, this doesn't guarantee the xterm * will work but w/o it we can be pretty sure it won't. */ - if (!getenv("DISPLAY")) { - printk("xterm_open: $DISPLAY not set.\n"); + if (getenv("DISPLAY") == NULL) { + printk(UM_KERN_ERR "xterm_open: $DISPLAY not set.\n"); return -ENODEV; } + /* + * This business of getting a descriptor to a temp file, + * deleting the file and closing the descriptor is just to get + * a known-unused name for the Unix socket that we really + * want. + */ fd = mkstemp(file); - if(fd < 0){ + if (fd < 0) { err = -errno; - printk("xterm_open : mkstemp failed, errno = %d\n", errno); + printk(UM_KERN_ERR "xterm_open : mkstemp failed, errno = %d\n", + errno); return err; } - if(unlink(file)){ + if (unlink(file)) { err = -errno; - printk("xterm_open : unlink failed, errno = %d\n", errno); + printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", + errno); return err; } - os_close_file(fd); + close(fd); fd = os_create_unix_socket(file, sizeof(file), 1); - if(fd < 0){ - printk("xterm_open : create_unix_socket failed, errno = %d\n", - -fd); - return(fd); + if (fd < 0) { + printk(UM_KERN_ERR "xterm_open : create_unix_socket failed, " + "errno = %d\n", -fd); + return fd; } sprintf(title, data->title, data->device); - stack = data->stack; - pid = run_helper(NULL, NULL, argv, &stack); - if(pid < 0){ - printk("xterm_open : run_helper failed, errno = %d\n", -pid); - return(pid); + pid = run_helper(NULL, NULL, argv); + if (pid < 0) { + err = pid; + printk(UM_KERN_ERR "xterm_open : run_helper failed, " + "errno = %d\n", -err); + goto out_close1; } - if (data->direct_rcv) { - new = os_rcv_fd(fd, &data->helper_pid); - } else { - err = os_set_fd_block(fd, 0); - if(err < 0){ - printk("xterm_open : failed to set descriptor " - "non-blocking, err = %d\n", -err); - return(err); - } - new = xterm_fd(fd, &data->helper_pid); + err = os_set_fd_block(fd, 0); + if (err < 0) { + printk(UM_KERN_ERR "xterm_open : failed to set descriptor " + "non-blocking, err = %d\n", -err); + goto out_kill; } - if(new < 0){ - printk("xterm_open : os_rcv_fd failed, err = %d\n", -new); - goto out; + + new = xterm_fd(fd, &data->helper_pid); + if (new < 0) { + err = new; + printk(UM_KERN_ERR "xterm_open : os_rcv_fd failed, err = %d\n", + -err); + goto out_kill; + } + + err = os_set_fd_block(new, 0); + if (err) { + printk(UM_KERN_ERR "xterm_open : failed to set xterm " + "descriptor non-blocking, err = %d\n", -err); + goto out_close2; } CATCH_EINTR(err = tcgetattr(new, &data->tt)); - if(err){ + if (err) { new = err; - goto out; + goto out_close2; } - if(data->raw){ + if (data->raw) { err = raw(new); - if(err){ + if (err) { new = err; - goto out; + goto out_close2; } } + unlink(file); data->pid = pid; *dev_out = NULL; - out: - unlink(file); - return(new); + + return new; + + out_close2: + close(new); + out_kill: + os_kill_process(pid, 1); + out_close1: + close(fd); + + return err; } -/* Not static because it's called directly by the tt mode gdb code */ -void xterm_close(int fd, void *d) +static void xterm_close(int fd, void *d) { struct xterm_chan *data = d; - if(data->pid != -1) + if (data->pid != -1) os_kill_process(data->pid, 1); data->pid = -1; - if(data->helper_pid != -1) + + if (data->helper_pid != -1) os_kill_process(data->helper_pid, 0); data->helper_pid = -1; + os_close_file(fd); } @@ -203,14 +224,3 @@ const struct chan_ops xterm_ops = { .free = xterm_free, .winch = 1, }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/xterm_kern.c b/arch/um/drivers/xterm_kern.c index a4ce7058e10e..b646bccef37a 100644 --- a/arch/um/drivers/xterm_kern.c +++ b/arch/um/drivers/xterm_kern.c @@ -1,18 +1,14 @@ /* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ -#include "linux/errno.h" -#include "linux/slab.h" -#include "linux/signal.h" -#include "linux/interrupt.h" -#include "asm/irq.h" -#include "irq_user.h" +#include <linux/slab.h> +#include <linux/completion.h> +#include <linux/irqreturn.h> +#include <asm/irq.h> #include "irq_kern.h" -#include "kern_util.h" #include "os.h" -#include "xterm.h" struct xterm_wait { struct completion ready; @@ -27,12 +23,13 @@ static irqreturn_t xterm_interrupt(int irq, void *data) int fd; fd = os_rcv_fd(xterm->fd, &xterm->pid); - if(fd == -EAGAIN) - return(IRQ_NONE); + if (fd == -EAGAIN) + return IRQ_NONE; xterm->new_fd = fd; complete(&xterm->ready); - return(IRQ_HANDLED); + + return IRQ_HANDLED; } int xterm_fd(int socket, int *pid_out) @@ -41,22 +38,21 @@ int xterm_fd(int socket, int *pid_out) int err, ret; data = kmalloc(sizeof(*data), GFP_KERNEL); - if(data == NULL){ + if (data == NULL) { printk(KERN_ERR "xterm_fd : failed to allocate xterm_wait\n"); - return(-ENOMEM); + return -ENOMEM; } /* This is a locked semaphore... */ - *data = ((struct xterm_wait) - { .fd = socket, - .pid = -1, - .new_fd = -1 }); + *data = ((struct xterm_wait) { .fd = socket, + .pid = -1, + .new_fd = -1 }); init_completion(&data->ready); - err = um_request_irq(XTERM_IRQ, socket, IRQ_READ, xterm_interrupt, + err = um_request_irq(XTERM_IRQ, socket, IRQ_READ, xterm_interrupt, IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, "xterm", data); - if (err){ + if (err) { printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, " "err = %d\n", err); ret = err; @@ -76,16 +72,5 @@ int xterm_fd(int socket, int *pid_out) out: kfree(data); - return(ret); + return ret; } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/chan_kern.h b/arch/um/include/chan_kern.h index c4b41bb1035f..624b5100a3cd 100644 --- a/arch/um/include/chan_kern.h +++ b/arch/um/include/chan_kern.h @@ -40,7 +40,7 @@ extern int console_open_chan(struct line *line, struct console *co); extern void deactivate_chan(struct list_head *chans, int irq); extern void reactivate_chan(struct list_head *chans, int irq); extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty); -extern void enable_chan(struct line *line); +extern int enable_chan(struct line *line); extern void close_chan(struct list_head *chans, int delay_free_irq); extern int chan_window_size(struct list_head *chans, unsigned short *rows_out, diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h index 38f16d812e7c..5a2263e05bb2 100644 --- a/arch/um/include/chan_user.h +++ b/arch/um/include/chan_user.h @@ -12,8 +12,6 @@ struct chan_opts { void (*const announce)(char *dev_name, int dev); char *xterm_title; const int raw; - const unsigned long tramp_stack; - const int in_kernel; }; enum chan_init_pri { INIT_STATIC, INIT_ALL, INIT_ONE }; @@ -44,7 +42,8 @@ extern void generic_free(void *data); struct tty_struct; extern void register_winch(int fd, struct tty_struct *tty); -extern void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty); +extern void register_winch_irq(int fd, int tty_fd, int pid, + struct tty_struct *tty, unsigned long stack); #define __channel_help(fn, prefix) \ __uml_help(fn, prefix "[0-9]*=<channel description>\n" \ diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h index 7376ee44e330..6eee343e53eb 100644 --- a/arch/um/include/common-offsets.h +++ b/arch/um/include/common-offsets.h @@ -27,6 +27,9 @@ DEFINE(UM_ELFCLASS64, ELFCLASS64); DEFINE(UM_NR_CPUS, NR_CPUS); +DEFINE(UM_GFP_KERNEL, GFP_KERNEL); +DEFINE(UM_GFP_ATOMIC, GFP_ATOMIC); + /* For crypto assembler code. */ DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx)); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 4d9fb26387d5..930b261ea483 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -239,11 +239,9 @@ extern unsigned long __do_user_copy(void *to, const void *from, int n, /* execvp.c */ extern int execvp_noalloc(char *buf, const char *file, char *const argv[]); /* helper.c */ -extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out); +extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv); extern int run_helper_thread(int (*proc)(void *), void *arg, - unsigned int flags, unsigned long *stack_out, - int stack_order); + unsigned int flags, unsigned long *stack_out); extern int helper_wait(int pid); diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h index e6d7c5aa3f4e..0ad17cb83d96 100644 --- a/arch/um/include/um_malloc.h +++ b/arch/um/include/um_malloc.h @@ -6,11 +6,17 @@ #ifndef __UM_MALLOC_H__ #define __UM_MALLOC_H__ -extern void *um_kmalloc(int size); -extern void *um_kmalloc_atomic(int size); +#include "kern_constants.h" + +extern void *__kmalloc(int size, int flags); +static inline void *kmalloc(int size, int flags) +{ + return __kmalloc(size, flags); +} + extern void kfree(const void *ptr); -extern void *um_vmalloc(int size); +extern void *vmalloc(unsigned long size); extern void vfree(void *ptr); #endif /* __UM_MALLOC_H__ */ diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index dba04d88b432..9870febdbead 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -30,7 +30,6 @@ #include "irq_kern.h" #include "os.h" #include "sigio.h" -#include "um_malloc.h" #include "misc_constants.h" #include "as-layout.h" diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 8d2c5496532b..bfa52f206bb6 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -46,7 +46,6 @@ #include "mode.h" #include "mode_kern.h" #include "choose-mode.h" -#include "um_malloc.h" /* This is a per-cpu array. A processor only modifies its entry and it only * cares about its entry, so it's OK if another processor is modifying its @@ -262,21 +261,6 @@ void dump_thread(struct pt_regs *regs, struct user *u) { } -void *um_kmalloc(int size) -{ - return kmalloc(size, GFP_KERNEL); -} - -void *um_kmalloc_atomic(int size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -void *um_vmalloc(int size) -{ - return vmalloc(size); -} - int __cant_sleep(void) { return in_atomic() || irqs_disabled() || in_interrupt(); /* Is in_interrupt() really needed? */ diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 9bf944f6a1db..b126df4ea168 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -177,6 +177,7 @@ static int do_not_aio(struct aio_thread_req *req) static int aio_req_fd_r = -1; static int aio_req_fd_w = -1; static int aio_pid = -1; +static unsigned long aio_stack; static int not_aio_thread(void *arg) { @@ -212,7 +213,6 @@ static int not_aio_thread(void *arg) static int init_aio_24(void) { - unsigned long stack; int fds[2], err; err = os_pipe(fds, 1, 1); @@ -227,7 +227,7 @@ static int init_aio_24(void) goto out_close_pipe; err = run_helper_thread(not_aio_thread, NULL, - CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); + CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack); if(err < 0) goto out_close_pipe; @@ -252,7 +252,6 @@ out: #define DEFAULT_24_AIO 0 static int init_aio_26(void) { - unsigned long stack; int err; if(io_setup(256, &ctx)){ @@ -263,7 +262,7 @@ static int init_aio_26(void) } err = run_helper_thread(aio_thread, NULL, - CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); + CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack); if(err < 0) return err; @@ -365,8 +364,10 @@ __initcall(init_aio); static void exit_aio(void) { - if(aio_pid != -1) + if (aio_pid != -1) { os_kill_process(aio_pid, 1); + free_stack(aio_stack, 0); + } } __uml_exitcall(exit_aio); diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index acba30161287..61d3953c7ac9 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -54,7 +54,7 @@ static void etap_change(int op, unsigned char *addr, unsigned char *netmask, return; } - output = um_kmalloc(UM_KERN_PAGE_SIZE); + output = kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL); if(output == NULL) printk("etap_change : Failed to allocate output buffer\n"); read_output(fd, output, UM_KERN_PAGE_SIZE); @@ -117,7 +117,7 @@ static int etap_tramp(char *dev, char *gate, int control_me, pe_data.control_remote = control_remote; pe_data.control_me = control_me; pe_data.data_me = data_me; - pid = run_helper(etap_pre_exec, &pe_data, args, NULL); + pid = run_helper(etap_pre_exec, &pe_data, args); if(pid < 0) err = pid; @@ -166,7 +166,7 @@ static int etap_open(void *data) err = etap_tramp(pri->dev_name, pri->gate_addr, control_fds[0], control_fds[1], data_fds[0], data_fds[1]); output_len = UM_KERN_PAGE_SIZE; - output = um_kmalloc(output_len); + output = kmalloc(output_len, UM_GFP_KERNEL); read_output(control_fds[0], output, output_len); if(output == NULL) diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 11a9779dc9f1..f848b4ea9343 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -83,7 +83,7 @@ static int tuntap_open_tramp(char *gate, int *fd_out, int me, int remote, data.stdout = remote; data.close_me = me; - pid = run_helper(tuntap_pre_exec, &data, argv, NULL); + pid = run_helper(tuntap_pre_exec, &data, argv); if(pid < 0) return -pid; diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 97bed16bf4c7..d81af7b8587a 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -44,17 +44,13 @@ static int helper_child(void *arg) /* Returns either the pid of the child process we run or -E* on failure. * XXX The alloc_stack here breaks if this is called in the tracing thread, so * we need to receive a preallocated stack (a local buffer is ok). */ -int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out) +int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) { struct helper_data data; unsigned long stack, sp; int pid, fds[2], ret, n; - if ((stack_out != NULL) && (*stack_out != 0)) - stack = *stack_out; - else - stack = alloc_stack(0, __cant_sleep()); + stack = alloc_stack(0, __cant_sleep()); if (stack == 0) return -ENOMEM; @@ -76,8 +72,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, data.pre_data = pre_data; data.argv = argv; data.fd = fds[1]; - data.buf = __cant_sleep() ? um_kmalloc_atomic(PATH_MAX) : - um_kmalloc(PATH_MAX); + data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) : + kmalloc(PATH_MAX, UM_GFP_KERNEL); pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); if (pid < 0) { ret = -errno; @@ -113,22 +109,21 @@ out_close: close(fds[1]); close(fds[0]); out_free: - if ((stack_out == NULL) || (*stack_out == 0)) - free_stack(stack, 0); + free_stack(stack, 0); return ret; } int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, - unsigned long *stack_out, int stack_order) + unsigned long *stack_out) { unsigned long stack, sp; int pid, status, err; - stack = alloc_stack(stack_order, __cant_sleep()); + stack = alloc_stack(0, __cant_sleep()); if (stack == 0) return -ENOMEM; - sp = stack + (UM_KERN_PAGE_SIZE << stack_order) - sizeof(void *); + sp = stack + UM_KERN_PAGE_SIZE - sizeof(void *); pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); if (pid < 0) { err = -errno; @@ -147,7 +142,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) printk("run_helper_thread - thread returned status " "0x%x\n", status); - free_stack(stack, stack_order); + free_stack(stack, 0); } else *stack_out = stack; return pid; diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index fb510d40480c..e85f4995a011 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -235,8 +235,8 @@ void *__wrap_malloc(int size) return __real_malloc(size); else if(size <= UM_KERN_PAGE_SIZE) /* finding contiguous pages can be hard*/ - ret = um_kmalloc(size); - else ret = um_vmalloc(size); + ret = kmalloc(size, UM_GFP_KERNEL); + else ret = vmalloc(size); /* glibc people insist that if malloc fails, errno should be * set by malloc as well. So we do. diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c index 8d4e0c6b8c92..dc03e9cccb63 100644 --- a/arch/um/os-Linux/sigio.c +++ b/arch/um/os-Linux/sigio.c @@ -26,6 +26,7 @@ * exitcall. */ static int write_sigio_pid = -1; +static unsigned long write_sigio_stack; /* These arrays are initialized before the sigio thread is started, and * the descriptors closed after it is killed. So, it can't see them change. @@ -104,7 +105,7 @@ static int need_poll(struct pollfds *polls, int n) if(n <= polls->size) return 0; - new = um_kmalloc_atomic(n * sizeof(struct pollfd)); + new = kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC); if(new == NULL){ printk("need_poll : failed to allocate new pollfds\n"); return -ENOMEM; @@ -144,8 +145,10 @@ static void update_thread(void) return; fail: /* Critical section start */ - if(write_sigio_pid != -1) + if (write_sigio_pid != -1) { os_kill_process(write_sigio_pid, 1); + free_stack(write_sigio_stack, 0); + } write_sigio_pid = -1; close(sigio_private[0]); close(sigio_private[1]); @@ -230,7 +233,7 @@ static struct pollfd *setup_initial_poll(int fd) { struct pollfd *p; - p = um_kmalloc(sizeof(struct pollfd)); + p = kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL); if (p == NULL) { printk("setup_initial_poll : failed to allocate poll\n"); return NULL; @@ -243,7 +246,6 @@ static struct pollfd *setup_initial_poll(int fd) static void write_sigio_workaround(void) { - unsigned long stack; struct pollfd *p; int err; int l_write_sigio_fds[2]; @@ -293,7 +295,8 @@ static void write_sigio_workaround(void) memcpy(sigio_private, l_sigio_private, sizeof(l_sigio_private)); write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, - CLONE_FILES | CLONE_VM, &stack, 0); + CLONE_FILES | CLONE_VM, + &write_sigio_stack); if (write_sigio_pid < 0) goto out_clear; @@ -356,10 +359,12 @@ out: static void sigio_cleanup(void) { - if(write_sigio_pid != -1){ - os_kill_process(write_sigio_pid, 1); - write_sigio_pid = -1; - } + if (write_sigio_pid == -1) + return; + + os_kill_process(write_sigio_pid, 1); + free_stack(write_sigio_stack, 0); + write_sigio_pid = -1; } __uml_exitcall(sigio_cleanup); diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 46c00cc429bc..ba9af8d62055 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -41,7 +41,7 @@ int is_skas_winch(int pid, int fd, void *data) if(pid != os_getpgrp()) return(0); - register_winch_irq(-1, fd, -1, data); + register_winch_irq(-1, fd, -1, data, 0); return(1); } diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 3f33165ada68..419b2d5ff6de 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -5,7 +5,8 @@ * so I *must* declare good prototypes for them and then EXPORT them. * The kernel code uses the macro defined by include/linux/string.h, * so I undef macros; the userspace code does not include that and I - * add an EXPORT for the glibc one.*/ + * add an EXPORT for the glibc one. + */ #undef strlen #undef strstr @@ -61,12 +62,18 @@ EXPORT_SYMBOL_PROTO(dup2); EXPORT_SYMBOL_PROTO(__xstat); EXPORT_SYMBOL_PROTO(__lxstat); EXPORT_SYMBOL_PROTO(__lxstat64); +EXPORT_SYMBOL_PROTO(__fxstat64); EXPORT_SYMBOL_PROTO(lseek); EXPORT_SYMBOL_PROTO(lseek64); EXPORT_SYMBOL_PROTO(chown); +EXPORT_SYMBOL_PROTO(fchown); EXPORT_SYMBOL_PROTO(truncate); +EXPORT_SYMBOL_PROTO(ftruncate64); EXPORT_SYMBOL_PROTO(utime); +EXPORT_SYMBOL_PROTO(utimes); +EXPORT_SYMBOL_PROTO(futimes); EXPORT_SYMBOL_PROTO(chmod); +EXPORT_SYMBOL_PROTO(fchmod); EXPORT_SYMBOL_PROTO(rename); EXPORT_SYMBOL_PROTO(__xmknod); @@ -102,14 +109,3 @@ EXPORT_SYMBOL(__stack_smash_handler); extern long __guard __attribute__((weak)); EXPORT_SYMBOL(__guard); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 5ce94430c019..8bdd25ac1542 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -427,6 +427,10 @@ config NR_CPUS This is purely to save memory - each supported CPU requires memory in the static kernel configuration. +config PHYSICAL_ALIGN + hex + default "0x200000" + config HOTPLUG_CPU bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile index ee6f6505f95f..67096389de1f 100644 --- a/arch/x86_64/boot/Makefile +++ b/arch/x86_64/boot/Makefile @@ -1,135 +1,9 @@ # # arch/x86_64/boot/Makefile # -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# - -# ROOT_DEV specifies the default root-device when making the image. -# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case -# the default of FLOPPY is used by 'build'. - -ROOT_DEV := CURRENT - -# If you want to preset the SVGA mode, uncomment the next line and -# set SVGA_MODE to whatever number you want. -# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. -# The number is the same as you would ordinarily press at bootup. - -SVGA_MODE := -DSVGA_MODE=NORMAL_VGA - -# If you want the RAM disk device, define this to be the size in blocks. - -#RAMDISK := -DRAMDISK=512 - -targets := vmlinux.bin bootsect bootsect.o \ - setup setup.o bzImage mtools.conf - -EXTRA_CFLAGS := -m32 - -hostprogs-y := tools/build -HOST_EXTRACFLAGS += $(LINUXINCLUDE) -subdir- := compressed/ #Let make clean descend in compressed/ -# --------------------------------------------------------------------------- - -$(obj)/bzImage: IMAGE_OFFSET := 0x100000 -$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ -$(obj)/bzImage: BUILDFLAGS := -b - -quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \ - $(obj)/vmlinux.bin $(ROOT_DEV) > $@ - -$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ - $(obj)/vmlinux.bin $(obj)/tools/build FORCE - $(call if_changed,image) - @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' - -$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE - $(call if_changed,objcopy) - -LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary -LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext - -$(obj)/setup $(obj)/bootsect: %: %.o FORCE - $(call if_changed,ld) - -$(obj)/compressed/vmlinux: FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ - -# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel -FDARGS = -# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel -FDINITRD = - -image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) - -$(obj)/mtools.conf: $(src)/mtools.conf.in - sed -e 's|@OBJ@|$(obj)|g' < $< > $@ - -# This requires write access to /dev/fd0 -zdisk: $(BOOTIMAGE) $(obj)/mtools.conf - MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync - syslinux /dev/fd0 ; sync - echo '$(image_cmdline)' | \ - MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ - fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync - -# These require being root or having syslinux 2.02 or higher installed -fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf - dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 - MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync - syslinux $(obj)/fdimage ; sync - echo '$(image_cmdline)' | \ - MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ - fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync - -fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf - dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 - MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync - syslinux $(obj)/fdimage ; sync - echo '$(image_cmdline)' | \ - MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ - fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync - -isoimage: $(BOOTIMAGE) - -rm -rf $(obj)/isoimage - mkdir $(obj)/isoimage - for i in lib lib64 share end ; do \ - if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \ - cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \ - break ; \ - fi ; \ - if [ $$i = end ] ; then exit 1 ; fi ; \ - done - cp $(BOOTIMAGE) $(obj)/isoimage/linux - echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ - fi - mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ - -no-emul-boot -boot-load-size 4 -boot-info-table \ - $(obj)/isoimage - rm -rf $(obj)/isoimage - -zlilo: $(BOOTIMAGE) - if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi - if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi - cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz - cp System.map $(INSTALL_PATH)/ - if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi +# The actual boot code is shared with i386 including the Makefile. +# So tell kbuild that we fetch the code from i386 and include the +# Makefile from i386 too. -install: - sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" +src := arch/i386/boot +include $(src)/Makefile diff --git a/arch/x86_64/boot/bootsect.S b/arch/x86_64/boot/bootsect.S deleted file mode 100644 index 011b7a4993d4..000000000000 --- a/arch/x86_64/boot/bootsect.S +++ /dev/null @@ -1,98 +0,0 @@ -/* - * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds - * - * modified by Drew Eckhardt - * modified by Bruce Evans (bde) - * modified by Chris Noe (May 1999) (as86 -> gas) - * gutted by H. Peter Anvin (Jan 2003) - * - * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment - * addresses must be multiplied by 16 to obtain their respective linear - * addresses. To avoid confusion, linear addresses are written using leading - * hex while segment addresses are written as segment:offset. - * - */ - -#include <asm/boot.h> - -SETUPSECTS = 4 /* default nr of setup-sectors */ -BOOTSEG = 0x07C0 /* original address of boot-sector */ -INITSEG = DEF_INITSEG /* we move boot here - out of the way */ -SETUPSEG = DEF_SETUPSEG /* setup starts here */ -SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ -SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ - /* to be loaded */ -ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ -SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */ - -#ifndef SVGA_MODE -#define SVGA_MODE ASK_VGA -#endif - -#ifndef RAMDISK -#define RAMDISK 0 -#endif - -#ifndef ROOT_RDONLY -#define ROOT_RDONLY 1 -#endif - -.code16 -.text - -.global _start -_start: - - # Normalize the start address - jmpl $BOOTSEG, $start2 - -start2: - movw %cs, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %ss - movw $0x7c00, %sp - sti - cld - - movw $bugger_off_msg, %si - -msg_loop: - lodsb - andb %al, %al - jz die - movb $0xe, %ah - movw $7, %bx - int $0x10 - jmp msg_loop - -die: - # Allow the user to press a key, then reboot - xorw %ax, %ax - int $0x16 - int $0x19 - - # int 0x19 should never return. In case it does anyway, - # invoke the BIOS reset code... - ljmp $0xf000,$0xfff0 - - -bugger_off_msg: - .ascii "Direct booting from floppy is no longer supported.\r\n" - .ascii "Please use a boot loader program instead.\r\n" - .ascii "\n" - .ascii "Remove disk and press any key to reboot . . .\r\n" - .byte 0 - - - # Kernel attributes; used by setup - - .org 497 -setup_sects: .byte SETUPSECTS -root_flags: .word ROOT_RDONLY -syssize: .word SYSSIZE -swap_dev: .word SWAP_DEV -ram_size: .word RAMDISK -vid_mode: .word SVGA_MODE -root_dev: .word ROOT_DEV -boot_flag: .word 0xAA55 diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile index 705a3e33d7e1..c9f2da7496c1 100644 --- a/arch/x86_64/boot/compressed/Makefile +++ b/arch/x86_64/boot/compressed/Makefile @@ -7,11 +7,12 @@ # targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional -# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with -# -m32 -CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin +CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \ + -fno-strict-aliasing -fPIC -mcmodel=small \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-stack-protector) +AFLAGS := $(CFLAGS) -D__ASSEMBLY__ LDFLAGS := -m elf_x86_64 LDFLAGS_vmlinux := -T diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S index f9d5692a0106..1312bfaff306 100644 --- a/arch/x86_64/boot/compressed/head.S +++ b/arch/x86_64/boot/compressed/head.S @@ -46,10 +46,10 @@ startup_32: * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode - * data at 0x34-0x3f are used as the stack for this calculation. - * Only 4 bytes are needed. + * data at 0x1e4 (defined as a scratch field) are used as the stack + * for this calculation. Only 4 bytes are needed. */ - leal 0x40(%esi), %esp + leal (0x1e4+4)(%esi), %esp call 1f 1: popl %ebp subl $1b, %ebp diff --git a/arch/x86_64/boot/install.sh b/arch/x86_64/boot/install.sh deleted file mode 100644 index baaa2369bdb8..000000000000 --- a/arch/x86_64/boot/install.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/sh -. $srctree/arch/i386/boot/install.sh diff --git a/arch/x86_64/boot/mtools.conf.in b/arch/x86_64/boot/mtools.conf.in deleted file mode 100644 index efd6d2490c1d..000000000000 --- a/arch/x86_64/boot/mtools.conf.in +++ /dev/null @@ -1,17 +0,0 @@ -# -# mtools configuration file for "make (b)zdisk" -# - -# Actual floppy drive -drive a: - file="/dev/fd0" - -# 1.44 MB floppy disk image -drive v: - file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter - -# 2.88 MB floppy disk image (mostly for virtual uses) -drive w: - file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter - - diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S deleted file mode 100644 index e9e33f949697..000000000000 --- a/arch/x86_64/boot/setup.S +++ /dev/null @@ -1,826 +0,0 @@ -/* - * setup.S Copyright (C) 1991, 1992 Linus Torvalds - * - * setup.s is responsible for getting the system data from the BIOS, - * and putting them into the appropriate places in system memory. - * both setup.s and system has been loaded by the bootblock. - * - * This code asks the bios for memory/disk/other parameters, and - * puts them in a "safe" place: 0x90000-0x901FF, ie where the - * boot-block used to be. It is then up to the protected mode - * system to read them from there before the area is overwritten - * for buffer-blocks. - * - * Move PS/2 aux init code to psaux.c - * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92 - * - * some changes and additional features by Christoph Niemann, - * March 1993/June 1994 (Christoph.Niemann@linux.org) - * - * add APM BIOS checking by Stephen Rothwell, May 1994 - * (sfr@canb.auug.org.au) - * - * High load stuff, initrd support and position independency - * by Hans Lermen & Werner Almesberger, February 1996 - * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch> - * - * Video handling moved to video.S by Martin Mares, March 1996 - * <mj@k332.feld.cvut.cz> - * - * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david - * parsons) to avoid loadlin confusion, July 1997 - * - * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. - * <stiker@northlink.com> - * - * Fix to work around buggy BIOSes which don't use carry bit correctly - * and/or report extended memory in CX/DX for e801h memory size detection - * call. As a result the kernel got wrong figures. The int15/e801h docs - * from Ralf Brown interrupt list seem to indicate AX/BX should be used - * anyway. So to avoid breaking many machines (presumably there was a reason - * to orginally use CX/DX instead of AX/BX), we do a kludge to see - * if CX/DX have been changed in the e801 call and if so use AX/BX . - * Michael Miller, April 2001 <michaelm@mjmm.org> - * - * Added long mode checking and SSE force. March 2003, Andi Kleen. - */ - -#include <asm/segment.h> -#include <linux/utsrelease.h> -#include <linux/compile.h> -#include <asm/boot.h> -#include <asm/e820.h> -#include <asm/page.h> -#include <asm/setup.h> - -/* Signature words to ensure LILO loaded us right */ -#define SIG1 0xAA55 -#define SIG2 0x5A5A - -INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way -SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536). -SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment - # ... and the former contents of CS - -DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020 - -.code16 -.globl begtext, begdata, begbss, endtext, enddata, endbss - -.text -begtext: -.data -begdata: -.bss -begbss: -.text - -start: - jmp trampoline - -# This is the setup header, and it must start at %cs:2 (old 0x9020:2) - - .ascii "HdrS" # header signature - .word 0x0206 # header version number (>= 0x0105) - # or else old loadlin-1.5 will fail) -realmode_swtch: .word 0, 0 # default_switch, SETUPSEG -start_sys_seg: .word SYSSEG - .word kernel_version # pointing to kernel version string - # above section of header is compatible - # with loadlin-1.5 (header v1.5). Don't - # change it. - -type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, - # Bootlin, SYSLX, bootsect...) - # See Documentation/i386/boot.txt for - # assigned ids - -# flags, unused bits must be zero (RFU) bit within loadflags -loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free -#ifndef __BIG_KERNEL__ - .byte 0 -#else - .byte LOADED_HIGH -#endif - -setup_move_size: .word 0x8000 # size to move, when setup is not - # loaded at 0x90000. We will move setup - # to 0x90000 then just before jumping - # into the kernel. However, only the - # loader knows how much data behind - # us also needs to be loaded. - -code32_start: # here loaders can put a different - # start address for 32-bit code. -#ifndef __BIG_KERNEL__ - .long 0x1000 # 0x1000 = default for zImage -#else - .long 0x100000 # 0x100000 = default for big kernel -#endif - -ramdisk_image: .long 0 # address of loaded ramdisk image - # Here the loader puts the 32-bit - # address where it loaded the image. - # This only will be read by the kernel. - -ramdisk_size: .long 0 # its size in bytes - -bootsect_kludge: - .long 0 # obsolete - -heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later) - # space from here (exclusive) down to - # end of setup code can be used by setup - # for local heap purposes. - -pad1: .word 0 -cmd_line_ptr: .long 0 # (Header version 0x0202 or later) - # If nonzero, a 32-bit pointer - # to the kernel command line. - # The command line should be - # located between the start of - # setup and the end of low - # memory (0xa0000), or it may - # get overwritten before it - # gets read. If this field is - # used, there is no longer - # anything magical about the - # 0x90000 segment; the setup - # can be located anywhere in - # low memory 0x10000 or higher. - -ramdisk_max: .long 0xffffffff -kernel_alignment: .long 0x200000 # physical addr alignment required for - # protected mode relocatable kernel -#ifdef CONFIG_RELOCATABLE -relocatable_kernel: .byte 1 -#else -relocatable_kernel: .byte 0 -#endif -pad2: .byte 0 -pad3: .word 0 - -cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, - #added with boot protocol - #version 2.06 - -trampoline: call start_of_setup - .align 16 - # The offset at this point is 0x240 - .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff) -# End of setup header ##################################################### - -start_of_setup: -# Bootlin depends on this being done early - movw $0x01500, %ax - movb $0x81, %dl - int $0x13 - -#ifdef SAFE_RESET_DISK_CONTROLLER -# Reset the disk controller. - movw $0x0000, %ax - movb $0x80, %dl - int $0x13 -#endif - -# Set %ds = %cs, we know that SETUPSEG = %cs at this point - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds -# Check signature at end of setup - cmpw $SIG1, setup_sig1 - jne bad_sig - - cmpw $SIG2, setup_sig2 - jne bad_sig - - jmp good_sig1 - -# Routine to print asciiz string at ds:si -prtstr: - lodsb - andb %al, %al - jz fin - - call prtchr - jmp prtstr - -fin: ret - -# Space printing -prtsp2: call prtspc # Print double space -prtspc: movb $0x20, %al # Print single space (note: fall-thru) - -prtchr: - pushw %ax - pushw %cx - movw $0007,%bx - movw $0x01, %cx - movb $0x0e, %ah - int $0x10 - popw %cx - popw %ax - ret - -beep: movb $0x07, %al - jmp prtchr - -no_sig_mess: .string "No setup signature found ..." - -good_sig1: - jmp good_sig - -# We now have to find the rest of the setup code/data -bad_sig: - movw %cs, %ax # SETUPSEG - subw $DELTA_INITSEG, %ax # INITSEG - movw %ax, %ds - xorb %bh, %bh - movb (497), %bl # get setup sect from bootsect - subw $4, %bx # LILO loads 4 sectors of setup - shlw $8, %bx # convert to words (1sect=2^8 words) - movw %bx, %cx - shrw $3, %bx # convert to segment - addw $SYSSEG, %bx - movw %bx, %cs:start_sys_seg -# Move rest of setup code/data to here - movw $2048, %di # four sectors loaded by LILO - subw %si, %si - movw %cs, %ax # aka SETUPSEG - movw %ax, %es - movw $SYSSEG, %ax - movw %ax, %ds - rep - movsw - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds - cmpw $SIG1, setup_sig1 - jne no_sig - - cmpw $SIG2, setup_sig2 - jne no_sig - - jmp good_sig - -no_sig: - lea no_sig_mess, %si - call prtstr - -no_sig_loop: - jmp no_sig_loop - -good_sig: - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds -# Check if an old loader tries to load a big-kernel - testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel? - jz loader_ok # No, no danger for old loaders. - - cmpb $0, %cs:type_of_loader # Do we have a loader that - # can deal with us? - jnz loader_ok # Yes, continue. - - pushw %cs # No, we have an old loader, - popw %ds # die. - lea loader_panic_mess, %si - call prtstr - - jmp no_sig_loop - -loader_panic_mess: .string "Wrong loader, giving up..." - -loader_ok: - /* check for long mode. */ - /* we have to do this before the VESA setup, otherwise the user - can't see the error message. */ - - pushw %ds - movw %cs,%ax - movw %ax,%ds - - call verify_cpu - testl %eax,%eax - jz sse_ok - -no_longmode: - call beep - lea long_mode_panic,%si - call prtstr -no_longmode_loop: - jmp no_longmode_loop -long_mode_panic: - .string "Your CPU does not support long mode. Use a 32bit distribution." - .byte 0 - -#include "../kernel/verify_cpu.S" -sse_ok: - popw %ds - -# tell BIOS we want to go to long mode - movl $0xec00,%eax # declare target operating mode - movl $2,%ebx # long mode - int $0x15 - -# Get memory size (extended mem, kB) - - xorl %eax, %eax - movl %eax, (0x1e0) -#ifndef STANDARD_MEMORY_BIOS_CALL - movb %al, (E820NR) -# Try three different memory detection schemes. First, try -# e820h, which lets us assemble a memory map, then try e801h, -# which returns a 32-bit memory size, and finally 88h, which -# returns 0-64m - -# method E820H: -# the memory map from hell. e820h returns memory classified into -# a whole bunch of different types, and allows memory holes and -# everything. We scan through this memory map and build a list -# of the first 32 memory areas, which we return at [E820MAP]. -# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification. - -#define SMAP 0x534d4150 - -meme820: - xorl %ebx, %ebx # continuation counter - movw $E820MAP, %di # point into the whitelist - # so we can have the bios - # directly write into it. - -jmpe820: - movl $0x0000e820, %eax # e820, upper word zeroed - movl $SMAP, %edx # ascii 'SMAP' - movl $20, %ecx # size of the e820rec - pushw %ds # data record. - popw %es - int $0x15 # make the call - jc bail820 # fall to e801 if it fails - - cmpl $SMAP, %eax # check the return is `SMAP' - jne bail820 # fall to e801 if it fails - -# cmpl $1, 16(%di) # is this usable memory? -# jne again820 - - # If this is usable memory, we save it by simply advancing %di by - # sizeof(e820rec). - # -good820: - movb (E820NR), %al # up to 128 entries - cmpb $E820MAX, %al - jae bail820 - - incb (E820NR) - movw %di, %ax - addw $20, %ax - movw %ax, %di -again820: - cmpl $0, %ebx # check to see if - jne jmpe820 # %ebx is set to EOF -bail820: - - -# method E801H: -# memory size is in 1k chunksizes, to avoid confusing loadlin. -# we store the 0xe801 memory size in a completely different place, -# because it will most likely be longer than 16 bits. -# (use 1e0 because that's what Larry Augustine uses in his -# alternative new memory detection scheme, and it's sensible -# to write everything into the same place.) - -meme801: - stc # fix to work around buggy - xorw %cx,%cx # BIOSes which don't clear/set - xorw %dx,%dx # carry on pass/error of - # e801h memory size call - # or merely pass cx,dx though - # without changing them. - movw $0xe801, %ax - int $0x15 - jc mem88 - - cmpw $0x0, %cx # Kludge to handle BIOSes - jne e801usecxdx # which report their extended - cmpw $0x0, %dx # memory in AX/BX rather than - jne e801usecxdx # CX/DX. The spec I have read - movw %ax, %cx # seems to indicate AX/BX - movw %bx, %dx # are more reasonable anyway... - -e801usecxdx: - andl $0xffff, %edx # clear sign extend - shll $6, %edx # and go from 64k to 1k chunks - movl %edx, (0x1e0) # store extended memory size - andl $0xffff, %ecx # clear sign extend - addl %ecx, (0x1e0) # and add lower memory into - # total size. - -# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or -# 64mb, depending on the bios) in ax. -mem88: - -#endif - movb $0x88, %ah - int $0x15 - movw %ax, (2) - -# Set the keyboard repeat rate to the max - movw $0x0305, %ax - xorw %bx, %bx - int $0x16 - -# Check for video adapter and its parameters and allow the -# user to browse video modes. - call video # NOTE: we need %ds pointing - # to bootsector - -# Get hd0 data... - xorw %ax, %ax - movw %ax, %ds - ldsw (4 * 0x41), %si - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - pushw %ax - movw %ax, %es - movw $0x0080, %di - movw $0x10, %cx - pushw %cx - cld - rep - movsb -# Get hd1 data... - xorw %ax, %ax - movw %ax, %ds - ldsw (4 * 0x46), %si - popw %cx - popw %es - movw $0x0090, %di - rep - movsb -# Check that there IS a hd1 :-) - movw $0x01500, %ax - movb $0x81, %dl - int $0x13 - jc no_disk1 - - cmpb $3, %ah - je is_disk1 - -no_disk1: - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %es - movw $0x0090, %di - movw $0x10, %cx - xorw %ax, %ax - cld - rep - stosb -is_disk1: - -# Check for PS/2 pointing device - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds - movb $0, (0x1ff) # default is no pointing device - int $0x11 # int 0x11: equipment list - testb $0x04, %al # check if mouse installed - jz no_psmouse - - movb $0xAA, (0x1ff) # device present -no_psmouse: - -#include "../../i386/boot/edd.S" - -# Now we want to move to protected mode ... - cmpw $0, %cs:realmode_swtch - jz rmodeswtch_normal - - lcall *%cs:realmode_swtch - - jmp rmodeswtch_end - -rmodeswtch_normal: - pushw %cs - call default_switch - -rmodeswtch_end: -# we get the code32 start address and modify the below 'jmpi' -# (loader may have changed it) - movl %cs:code32_start, %eax - movl %eax, %cs:code32 - -# Now we move the system to its rightful place ... but we check if we have a -# big-kernel. In that case we *must* not move it ... - testb $LOADED_HIGH, %cs:loadflags - jz do_move0 # .. then we have a normal low - # loaded zImage - # .. or else we have a high - # loaded bzImage - jmp end_move # ... and we skip moving - -do_move0: - movw $0x100, %ax # start of destination segment - movw %cs, %bp # aka SETUPSEG - subw $DELTA_INITSEG, %bp # aka INITSEG - movw %cs:start_sys_seg, %bx # start of source segment - cld -do_move: - movw %ax, %es # destination segment - incb %ah # instead of add ax,#0x100 - movw %bx, %ds # source segment - addw $0x100, %bx - subw %di, %di - subw %si, %si - movw $0x800, %cx - rep - movsw - cmpw %bp, %bx # assume start_sys_seg > 0x200, - # so we will perhaps read one - # page more than needed, but - # never overwrite INITSEG - # because destination is a - # minimum one page below source - jb do_move - -end_move: -# then we load the segment descriptors - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds - -# Check whether we need to be downward compatible with version <=201 - cmpl $0, cmd_line_ptr - jne end_move_self # loader uses version >=202 features - cmpb $0x20, type_of_loader - je end_move_self # bootsect loader, we know of it - -# Boot loader doesnt support boot protocol version 2.02. -# If we have our code not at 0x90000, we need to move it there now. -# We also then need to move the params behind it (commandline) -# Because we would overwrite the code on the current IP, we move -# it in two steps, jumping high after the first one. - movw %cs, %ax - cmpw $SETUPSEG, %ax - je end_move_self - - cli # make sure we really have - # interrupts disabled ! - # because after this the stack - # should not be used - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ss, %dx - cmpw %ax, %dx - jb move_self_1 - - addw $INITSEG, %dx - subw %ax, %dx # this will go into %ss after - # the move -move_self_1: - movw %ax, %ds - movw $INITSEG, %ax # real INITSEG - movw %ax, %es - movw %cs:setup_move_size, %cx - std # we have to move up, so we use - # direction down because the - # areas may overlap - movw %cx, %di - decw %di - movw %di, %si - subw $move_self_here+0x200, %cx - rep - movsb - ljmp $SETUPSEG, $move_self_here - -move_self_here: - movw $move_self_here+0x200, %cx - rep - movsb - movw $SETUPSEG, %ax - movw %ax, %ds - movw %dx, %ss -end_move_self: # now we are at the right place - lidt idt_48 # load idt with 0,0 - xorl %eax, %eax # Compute gdt_base - movw %ds, %ax # (Convert %ds:gdt to a linear ptr) - shll $4, %eax - addl $gdt, %eax - movl %eax, (gdt_48+2) - lgdt gdt_48 # load gdt with whatever is - # appropriate - -# that was painless, now we enable a20 - call empty_8042 - - movb $0xD1, %al # command write - outb %al, $0x64 - call empty_8042 - - movb $0xDF, %al # A20 on - outb %al, $0x60 - call empty_8042 - -# -# You must preserve the other bits here. Otherwise embarrasing things -# like laptops powering off on boot happen. Corrected version by Kira -# Brown from Linux 2.2 -# - inb $0x92, %al # - orb $02, %al # "fast A20" version - outb %al, $0x92 # some chips have only this - -# wait until a20 really *is* enabled; it can take a fair amount of -# time on certain systems; Toshiba Tecras are known to have this -# problem. The memory location used here (0x200) is the int 0x80 -# vector, which should be safe to use. - - xorw %ax, %ax # segment 0x0000 - movw %ax, %fs - decw %ax # segment 0xffff (HMA) - movw %ax, %gs -a20_wait: - incw %ax # unused memory location <0xfff0 - movw %ax, %fs:(0x200) # we use the "int 0x80" vector - cmpw %gs:(0x210), %ax # and its corresponding HMA addr - je a20_wait # loop until no longer aliased - -# make sure any possible coprocessor is properly reset.. - xorw %ax, %ax - outb %al, $0xf0 - call delay - - outb %al, $0xf1 - call delay - -# well, that went ok, I hope. Now we mask all interrupts - the rest -# is done in init_IRQ(). - movb $0xFF, %al # mask all interrupts for now - outb %al, $0xA1 - call delay - - movb $0xFB, %al # mask all irq's but irq2 which - outb %al, $0x21 # is cascaded - -# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't -# need no steenking BIOS anyway (except for the initial loading :-). -# The BIOS-routine wants lots of unnecessary data, and it's less -# "interesting" anyway. This is how REAL programmers do it. -# -# Well, now's the time to actually move into protected mode. To make -# things as simple as possible, we do no register set-up or anything, -# we let the gnu-compiled 32-bit programs do that. We just jump to -# absolute address 0x1000 (or the loader supplied one), -# in 32-bit protected mode. -# -# Note that the short jump isn't strictly needed, although there are -# reasons why it might be a good idea. It won't hurt in any case. - movw $1, %ax # protected mode (PE) bit - lmsw %ax # This is it! - jmp flush_instr - -flush_instr: - xorw %bx, %bx # Flag to indicate a boot - xorl %esi, %esi # Pointer to real-mode code - movw %cs, %si - subw $DELTA_INITSEG, %si - shll $4, %esi # Convert to 32-bit pointer -# NOTE: For high loaded big kernels we need a -# jmpi 0x100000,__KERNEL_CS -# -# but we yet haven't reloaded the CS register, so the default size -# of the target offset still is 16 bit. -# However, using an operand prefix (0x66), the CPU will properly -# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference -# Manual, Mixing 16-bit and 32-bit code, page 16-6) - - .byte 0x66, 0xea # prefix + jmpi-opcode -code32: .long 0x1000 # will be set to 0x100000 - # for big kernels - .word __KERNEL_CS - -# Here's a bunch of information about your current kernel.. -kernel_version: .ascii UTS_RELEASE - .ascii " (" - .ascii LINUX_COMPILE_BY - .ascii "@" - .ascii LINUX_COMPILE_HOST - .ascii ") " - .ascii UTS_VERSION - .byte 0 - -# This is the default real mode switch routine. -# to be called just before protected mode transition -default_switch: - cli # no interrupts allowed ! - movb $0x80, %al # disable NMI for bootup - # sequence - outb %al, $0x70 - lret - - -# This routine checks that the keyboard command queue is empty -# (after emptying the output buffers) -# -# Some machines have delusions that the keyboard buffer is always full -# with no keyboard attached... -# -# If there is no keyboard controller, we will usually get 0xff -# to all the reads. With each IO taking a microsecond and -# a timeout of 100,000 iterations, this can take about half a -# second ("delay" == outb to port 0x80). That should be ok, -# and should also be plenty of time for a real keyboard controller -# to empty. -# - -empty_8042: - pushl %ecx - movl $100000, %ecx - -empty_8042_loop: - decl %ecx - jz empty_8042_end_loop - - call delay - - inb $0x64, %al # 8042 status port - testb $1, %al # output buffer? - jz no_output - - call delay - inb $0x60, %al # read it - jmp empty_8042_loop - -no_output: - testb $2, %al # is input buffer full? - jnz empty_8042_loop # yes - loop -empty_8042_end_loop: - popl %ecx - ret - -# Read the cmos clock. Return the seconds in al -gettime: - pushw %cx - movb $0x02, %ah - int $0x1a - movb %dh, %al # %dh contains the seconds - andb $0x0f, %al - movb %dh, %ah - movb $0x04, %cl - shrb %cl, %ah - aad - popw %cx - ret - -# Delay is needed after doing I/O -delay: - outb %al,$0x80 - ret - -# Descriptor tables -gdt: - .word 0, 0, 0, 0 # dummy - - .word 0, 0, 0, 0 # unused - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9A00 # code read/exec - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) -gdt_end: -idt_48: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L -gdt_48: - .word gdt_end-gdt-1 # gdt limit - .word 0, 0 # gdt base (filled in later) - -# Include video setup & detection code - -#include "../../i386/boot/video.S" - -# Setup signature -- must be last -setup_sig1: .word SIG1 -setup_sig2: .word SIG2 - -# After this point, there is some free space which is used by the video mode -# handling code to store the temporary mode table (not used by the kernel). - -modelist: - -.text -endtext: -.data -enddata: -.bss -endbss: diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c deleted file mode 100644 index eae86691709a..000000000000 --- a/arch/x86_64/boot/tools/build.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 1997 Martin Mares - */ - -/* - * This file builds a disk-image from three different files: - * - * - bootsect: compatibility mbr which prints an error message if - * someone tries to boot the kernel directly. - * - setup: 8086 machine code, sets up system parm - * - system: 80386 code for actual system - * - * It does some checking that all files are of the correct type, and - * just writes the result to stdout, removing headers and padding to - * the right amount. It also writes some system data to stderr. - */ - -/* - * Changes by tytso to allow root device specification - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 - * Cross compiling fixes by Gertjan van Wingerde, July 1996 - * Rewritten by Martin Mares, April 1997 - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> -#include <stdarg.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/sysmacros.h> -#include <unistd.h> -#include <fcntl.h> -#include <asm/boot.h> - -typedef unsigned char byte; -typedef unsigned short word; -typedef unsigned long u32; - -#define DEFAULT_MAJOR_ROOT 0 -#define DEFAULT_MINOR_ROOT 0 - -/* Minimal number of setup sectors (see also bootsect.S) */ -#define SETUP_SECTS 4 - -byte buf[1024]; -int fd; -int is_big_kernel; - -void die(const char * str, ...) -{ - va_list args; - va_start(args, str); - vfprintf(stderr, str, args); - fputc('\n', stderr); - exit(1); -} - -void file_open(const char *name) -{ - if ((fd = open(name, O_RDONLY, 0)) < 0) - die("Unable to open `%s': %m", name); -} - -void usage(void) -{ - die("Usage: build [-b] bootsect setup system [rootdev] [> image]"); -} - -int main(int argc, char ** argv) -{ - unsigned int i, c, sz, setup_sectors; - u32 sys_size; - byte major_root, minor_root; - struct stat sb; - - if (argc > 2 && !strcmp(argv[1], "-b")) - { - is_big_kernel = 1; - argc--, argv++; - } - if ((argc < 4) || (argc > 5)) - usage(); - if (argc > 4) { - if (!strcmp(argv[4], "CURRENT")) { - if (stat("/", &sb)) { - perror("/"); - die("Couldn't stat /"); - } - major_root = major(sb.st_dev); - minor_root = minor(sb.st_dev); - } else if (strcmp(argv[4], "FLOPPY")) { - if (stat(argv[4], &sb)) { - perror(argv[4]); - die("Couldn't stat root device."); - } - major_root = major(sb.st_rdev); - minor_root = minor(sb.st_rdev); - } else { - major_root = 0; - minor_root = 0; - } - } else { - major_root = DEFAULT_MAJOR_ROOT; - minor_root = DEFAULT_MINOR_ROOT; - } - fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); - - file_open(argv[1]); - i = read(fd, buf, sizeof(buf)); - fprintf(stderr,"Boot sector %d bytes.\n",i); - if (i != 512) - die("Boot block must be exactly 512 bytes"); - if (buf[510] != 0x55 || buf[511] != 0xaa) - die("Boot block hasn't got boot flag (0xAA55)"); - buf[508] = minor_root; - buf[509] = major_root; - if (write(1, buf, 512) != 512) - die("Write call failed"); - close (fd); - - file_open(argv[2]); /* Copy the setup code */ - for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c ) - if (write(1, buf, c) != c) - die("Write call failed"); - if (c != 0) - die("read-error on `setup'"); - close (fd); - - setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */ - /* for compatibility with ancient versions of LILO. */ - if (setup_sectors < SETUP_SECTS) - setup_sectors = SETUP_SECTS; - fprintf(stderr, "Setup is %d bytes.\n", i); - memset(buf, 0, sizeof(buf)); - while (i < setup_sectors * 512) { - c = setup_sectors * 512 - i; - if (c > sizeof(buf)) - c = sizeof(buf); - if (write(1, buf, c) != c) - die("Write call failed"); - i += c; - } - - file_open(argv[3]); - if (fstat (fd, &sb)) - die("Unable to stat `%s': %m", argv[3]); - sz = sb.st_size; - fprintf (stderr, "System is %d kB\n", sz/1024); - sys_size = (sz + 15) / 16; - if (!is_big_kernel && sys_size > DEF_SYSSIZE) - die("System is too big. Try using bzImage or modules."); - while (sz > 0) { - int l, n; - - l = (sz > sizeof(buf)) ? sizeof(buf) : sz; - if ((n=read(fd, buf, l)) != l) { - if (n < 0) - die("Error reading %s: %m", argv[3]); - else - die("%s: Unexpected EOF", argv[3]); - } - if (write(1, buf, l) != l) - die("Write failed"); - sz -= l; - } - close(fd); - - if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */ - die("Output: seek failed"); - buf[0] = setup_sectors; - if (write(1, buf, 1) != 1) - die("Write of setup sector count failed"); - if (lseek(1, 500, SEEK_SET) != 500) - die("Output: seek failed"); - buf[0] = (sys_size & 0xff); - buf[1] = ((sys_size >> 8) & 0xff); - buf[2] = ((sys_size >> 16) & 0xff); - buf[3] = ((sys_size >> 24) & 0xff); - if (write(1, buf, 4) != 4) - die("Write of image length failed"); - - return 0; /* Everything is OK */ -} diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 47565c3345d2..782dea819438 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -526,7 +526,7 @@ ia32_sys_call_table: .quad sys_init_module .quad sys_delete_module .quad quiet_ni_syscall /* 130 get_kernel_syms */ - .quad sys_quotactl + .quad sys32_quotactl .quad sys_getpgid .quad sys_fchdir .quad quiet_ni_syscall /* bdflush */ diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index de1de8a2fd84..47f1dc30bf56 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_PCI) += early-quirks.o obj-y += topology.o obj-y += intel_cacheinfo.o +obj-y += addon_cpuid_features.o obj-y += pcspeaker.o CFLAGS_vsyscall.o := $(PROFILING) -g0 @@ -55,6 +56,7 @@ cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/kernel/topology.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o +addon_cpuid_features-y += ../../i386/kernel/cpu/addon_cpuid_features.o quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o diff --git a/arch/x86_64/kernel/cpufreq/Kconfig b/arch/x86_64/kernel/cpufreq/Kconfig index c0749d2479f5..a3fd51926cbd 100644 --- a/arch/x86_64/kernel/cpufreq/Kconfig +++ b/arch/x86_64/kernel/cpufreq/Kconfig @@ -48,10 +48,6 @@ config X86_SPEEDSTEP_CENTRINO If in doubt, say N. -config X86_SPEEDSTEP_CENTRINO_ACPI - bool - depends on X86_SPEEDSTEP_CENTRINO - config X86_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" select CPU_FREQ_TABLE @@ -73,7 +69,7 @@ comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF bool "/proc/acpi/processor/../performance interface (deprecated)" depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K8_ACPI + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI help This enables the deprecated /proc/acpi/processor/../performance interface. While it is helpful for debugging, the generic, diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 1fab487dee86..941c84baecc8 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -73,7 +73,11 @@ startup_64: addq %rbp, init_level4_pgt + (511*8)(%rip) addq %rbp, level3_ident_pgt + 0(%rip) + addq %rbp, level3_kernel_pgt + (510*8)(%rip) + addq %rbp, level3_kernel_pgt + (511*8)(%rip) + + addq %rbp, level2_fixmap_pgt + (506*8)(%rip) /* Add an Identity mapping if I am above 1G */ leaq _text(%rip), %rdi @@ -314,7 +318,16 @@ NEXT_PAGE(level3_kernel_pgt) .fill 510,8,0 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 1,8,0 + .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + +NEXT_PAGE(level2_fixmap_pgt) + .fill 506,8,0 + .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ + .fill 5,8,0 + +NEXT_PAGE(level1_fixmap_pgt) + .fill 512,8,0 NEXT_PAGE(level2_ident_pgt) /* Since I easily can, map the first 1G. diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 9f80aad3fe2d..90f6315d02d4 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -22,8 +22,7 @@ EXPORT_SYMBOL(bad_dma_address); int iommu_bio_merge __read_mostly = 0; EXPORT_SYMBOL(iommu_bio_merge); -int iommu_sac_force __read_mostly = 0; -EXPORT_SYMBOL(iommu_sac_force); +static int iommu_sac_force __read_mostly = 0; int no_iommu __read_mostly; #ifdef CONFIG_IOMMU_DEBUG diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index eb6524f3ac29..33ef718f8cb5 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -846,6 +846,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86_capability[2] = cpuid_edx(0x80860001); } + init_scattered_cpuid_features(c); + c->apicid = phys_pkg_id(0); /* @@ -931,7 +933,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx", - "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL, + "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe", /* AMD-defined */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, @@ -947,10 +949,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Other (Linux-defined) */ - "cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL, - "constant_tsc", NULL, NULL, - "up", NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", + NULL, NULL, NULL, NULL, + "constant_tsc", "up", NULL, "arch_perfmon", + "pebs", "bts", NULL, "sync_rdtsc", + "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ @@ -961,7 +964,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* VIA/Cyrix/Centaur-defined */ NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, @@ -972,6 +975,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Auxiliary (Linux-defined) */ + "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; static char *x86_power_flags[] = { "ts", /* temperature sensor */ diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index aac1c0be54c6..7fa155c394d9 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -531,7 +531,7 @@ void die(const char * str, struct pt_regs * regs, long err) unsigned long flags = oops_begin(); if (!user_mode(regs)) - report_bug(regs->rip); + report_bug(regs->rip, regs); __die(str, regs, err); oops_end(flags); diff --git a/arch/x86_64/kernel/verify_cpu.S b/arch/x86_64/kernel/verify_cpu.S index e035f5948199..45b6f8a975a1 100644 --- a/arch/x86_64/kernel/verify_cpu.S +++ b/arch/x86_64/kernel/verify_cpu.S @@ -37,20 +37,6 @@ verify_cpu: pushl $0 # Kill any dangerous flags popfl - /* minimum CPUID flags for x86-64 as defined by AMD */ -#define M(x) (1<<(x)) -#define M2(a,b) M(a)|M(b) -#define M4(a,b,c,d) M(a)|M(b)|M(c)|M(d) - -#define SSE_MASK \ - (M2(X86_FEATURE_XMM,X86_FEATURE_XMM2)) -#define REQUIRED_MASK1 \ - (M4(X86_FEATURE_FPU,X86_FEATURE_PSE,X86_FEATURE_TSC,X86_FEATURE_MSR)|\ - M4(X86_FEATURE_PAE,X86_FEATURE_CX8,X86_FEATURE_PGE,X86_FEATURE_CMOV)|\ - M(X86_FEATURE_FXSR)) -#define REQUIRED_MASK2 \ - (M(X86_FEATURE_LM - 32)) - pushfl # standard way to check for cpuid popl %eax movl %eax,%ebx @@ -79,8 +65,8 @@ verify_cpu: verify_cpu_noamd: movl $0x1,%eax # Does the cpu have what it takes cpuid - andl $REQUIRED_MASK1,%edx - xorl $REQUIRED_MASK1,%edx + andl $REQUIRED_MASK0,%edx + xorl $REQUIRED_MASK0,%edx jnz verify_cpu_no_longmode movl $0x80000000,%eax # See if extended cpuid is implemented @@ -90,8 +76,8 @@ verify_cpu_noamd: movl $0x80000001,%eax # Does the cpu have what it takes cpuid - andl $REQUIRED_MASK2,%edx - xorl $REQUIRED_MASK2,%edx + andl $REQUIRED_MASK1,%edx + xorl $REQUIRED_MASK1,%edx jnz verify_cpu_no_longmode verify_cpu_sse_test: |