diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/imx51-babbage.dts | 22 |
1 files changed, 5 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; |