summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-exynos4/Makefile2
-rw-r--r--arch/arm/mach-exynos4/gpiolib.c365
-rw-r--r--arch/arm/mach-nomadik/Kconfig1
-rw-r--r--arch/arm/mach-s5pc100/Makefile2
-rw-r--r--arch/arm/mach-s5pc100/gpiolib.c355
-rw-r--r--arch/arm/mach-s5pv210/Makefile2
-rw-r--r--arch/arm/mach-s5pv210/gpiolib.c288
-rw-r--r--arch/arm/mach-u300/Makefile2
-rw-r--r--arch/arm/mach-u300/gpio.c700
-rw-r--r--arch/arm/mach-ux500/Kconfig1
-rw-r--r--arch/arm/plat-nomadik/Kconfig5
-rw-r--r--arch/arm/plat-nomadik/Makefile1
-rw-r--r--arch/arm/plat-nomadik/gpio.c1020
-rw-r--r--arch/arm/plat-nomadik/include/plat/gpio.h2
-rw-r--r--arch/arm/plat-omap/Makefile2
-rw-r--r--arch/arm/plat-omap/gpio.c2112
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h103
-rw-r--r--arch/arm/plat-samsung/Makefile1
-rw-r--r--arch/arm/plat-samsung/gpiolib.c206
19 files changed, 110 insertions, 5060 deletions
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 683fc387c8af..a9bb94fabaa7 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,7 +13,7 @@ obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c
deleted file mode 100644
index d54ca6adb660..000000000000
--- a/arch/arm/mach-exynos4/gpiolib.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/* linux/arch/arm/mach-exynos4/gpiolib.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPA0(0),
- .ngpio = EXYNOS4_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPA1(0),
- .ngpio = EXYNOS4_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPB(0),
- .ngpio = EXYNOS4_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC0(0),
- .ngpio = EXYNOS4_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC1(0),
- .ngpio = EXYNOS4_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD0(0),
- .ngpio = EXYNOS4_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD1(0),
- .ngpio = EXYNOS4_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE0(0),
- .ngpio = EXYNOS4_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE1(0),
- .ngpio = EXYNOS4_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE2(0),
- .ngpio = EXYNOS4_GPIO_E2_NR,
- .label = "GPE2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE3(0),
- .ngpio = EXYNOS4_GPIO_E3_NR,
- .label = "GPE3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE4(0),
- .ngpio = EXYNOS4_GPIO_E4_NR,
- .label = "GPE4",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF0(0),
- .ngpio = EXYNOS4_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF1(0),
- .ngpio = EXYNOS4_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF2(0),
- .ngpio = EXYNOS4_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF3(0),
- .ngpio = EXYNOS4_GPIO_F3_NR,
- .label = "GPF3",
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPJ0(0),
- .ngpio = EXYNOS4_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPJ1(0),
- .ngpio = EXYNOS4_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK0(0),
- .ngpio = EXYNOS4_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK1(0),
- .ngpio = EXYNOS4_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK2(0),
- .ngpio = EXYNOS4_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK3(0),
- .ngpio = EXYNOS4_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL0(0),
- .ngpio = EXYNOS4_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL1(0),
- .ngpio = EXYNOS4_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL2(0),
- .ngpio = EXYNOS4_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY0(0),
- .ngpio = EXYNOS4_GPIO_Y0_NR,
- .label = "GPY0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY1(0),
- .ngpio = EXYNOS4_GPIO_Y1_NR,
- .label = "GPY1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY2(0),
- .ngpio = EXYNOS4_GPIO_Y2_NR,
- .label = "GPY2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY3(0),
- .ngpio = EXYNOS4_GPIO_Y3_NR,
- .label = "GPY3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY4(0),
- .ngpio = EXYNOS4_GPIO_Y4_NR,
- .label = "GPY4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY5(0),
- .ngpio = EXYNOS4_GPIO_Y5_NR,
- .label = "GPY5",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY6(0),
- .ngpio = EXYNOS4_GPIO_Y6_NR,
- .label = "GPY6",
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = EXYNOS4_GPX0(0),
- .ngpio = EXYNOS4_GPIO_X0_NR,
- .label = "GPX0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = EXYNOS4_GPX1(0),
- .ngpio = EXYNOS4_GPIO_X1_NR,
- .label = "GPX1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = EXYNOS4_GPX2(0),
- .ngpio = EXYNOS4_GPIO_X2_NR,
- .label = "GPX2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = EXYNOS4_GPX3(0),
- .ngpio = EXYNOS4_GPIO_X3_NR,
- .label = "GPX3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPZ(0),
- .ngpio = EXYNOS4_GPIO_Z_NR,
- .label = "GPZ",
- },
- },
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int i;
- int group = 0;
- int nr_chips;
-
- /* GPIO part 1 */
-
- chip = exynos4_gpio_part1_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO1 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
- /* GPIO part 2 */
-
- chip = exynos4_gpio_part2_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO2 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
- /* GPIO part 3 */
-
- chip = exynos4_gpio_part3_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO3 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
- s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
- return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 71f3ea623974..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,7 +6,6 @@ config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
select HAS_MTU
- select NOMADIK_GPIO
endmenu
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index eecab57d2e5d..a5e6e608b498 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,7 +11,7 @@ obj- :=
# Core support for S5PC100 system
-obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o
+obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
obj-$(CONFIG_CPU_S5PC100) += dma.o
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
deleted file mode 100644
index 2842394b28b5..000000000000
--- a/arch/arm/mach-s5pc100/gpiolib.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/gpiolib.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5PC100 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank GPIOs Style INT Type
- * A0 8 4Bit GPIO_INT0
- * A1 5 4Bit GPIO_INT1
- * B 8 4Bit GPIO_INT2
- * C 5 4Bit GPIO_INT3
- * D 7 4Bit GPIO_INT4
- * E0 8 4Bit GPIO_INT5
- * E1 6 4Bit GPIO_INT6
- * F0 8 4Bit GPIO_INT7
- * F1 8 4Bit GPIO_INT8
- * F2 8 4Bit GPIO_INT9
- * F3 4 4Bit GPIO_INT10
- * G0 8 4Bit GPIO_INT11
- * G1 3 4Bit GPIO_INT12
- * G2 7 4Bit GPIO_INT13
- * G3 7 4Bit GPIO_INT14
- * H0 8 4Bit WKUP_INT
- * H1 8 4Bit WKUP_INT
- * H2 8 4Bit WKUP_INT
- * H3 8 4Bit WKUP_INT
- * I 8 4Bit GPIO_INT15
- * J0 8 4Bit GPIO_INT16
- * J1 5 4Bit GPIO_INT17
- * J2 8 4Bit GPIO_INT18
- * J3 8 4Bit GPIO_INT19
- * J4 4 4Bit GPIO_INT20
- * K0 8 4Bit None
- * K1 6 4Bit None
- * K2 8 4Bit None
- * K3 8 4Bit None
- * L0 8 4Bit None
- * L1 8 4Bit None
- * L2 8 4Bit None
- * L3 8 4Bit None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
- .cfg_eint = 0xf,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
- {
- .chip = {
- .base = S5PC100_GPA0(0),
- .ngpio = S5PC100_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPA1(0),
- .ngpio = S5PC100_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPB(0),
- .ngpio = S5PC100_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PC100_GPC(0),
- .ngpio = S5PC100_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .chip = {
- .base = S5PC100_GPD(0),
- .ngpio = S5PC100_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .chip = {
- .base = S5PC100_GPE0(0),
- .ngpio = S5PC100_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPE1(0),
- .ngpio = S5PC100_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF0(0),
- .ngpio = S5PC100_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF1(0),
- .ngpio = S5PC100_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF2(0),
- .ngpio = S5PC100_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF3(0),
- .ngpio = S5PC100_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG0(0),
- .ngpio = S5PC100_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG1(0),
- .ngpio = S5PC100_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG2(0),
- .ngpio = S5PC100_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG3(0),
- .ngpio = S5PC100_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPI(0),
- .ngpio = S5PC100_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ0(0),
- .ngpio = S5PC100_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ1(0),
- .ngpio = S5PC100_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ2(0),
- .ngpio = S5PC100_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ3(0),
- .ngpio = S5PC100_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ4(0),
- .ngpio = S5PC100_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK0(0),
- .ngpio = S5PC100_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK1(0),
- .ngpio = S5PC100_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK2(0),
- .ngpio = S5PC100_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK3(0),
- .ngpio = S5PC100_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL0(0),
- .ngpio = S5PC100_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL1(0),
- .ngpio = S5PC100_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL2(0),
- .ngpio = S5PC100_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL3(0),
- .ngpio = S5PC100_GPIO_L3_NR,
- .label = "GPL3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL4(0),
- .ngpio = S5PC100_GPIO_L4_NR,
- .label = "GPL4",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PC100_GPH0(0),
- .ngpio = S5PC100_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PC100_GPH1(0),
- .ngpio = S5PC100_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PC100_GPH2(0),
- .ngpio = S5PC100_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PC100_GPH3(0),
- .ngpio = S5PC100_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
- int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
- int gpioint_group = 0;
- int i;
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- chip->group = gpioint_group++;
- }
- if (chip->base == NULL)
- chip->base = S5PC100_BANK_BASE(i);
- }
-
- samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
- return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 11f17907b4e8..50907aca006c 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -12,7 +12,7 @@ obj- :=
# Core support for S5PV210 system
-obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
deleted file mode 100644
index 1ba20a703e05..000000000000
--- a/arch/arm/mach-s5pv210/gpiolib.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/gpiolib.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
- {
- .chip = {
- .base = S5PV210_GPA0(0),
- .ngpio = S5PV210_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPA1(0),
- .ngpio = S5PV210_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPB(0),
- .ngpio = S5PV210_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC0(0),
- .ngpio = S5PV210_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC1(0),
- .ngpio = S5PV210_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD0(0),
- .ngpio = S5PV210_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD1(0),
- .ngpio = S5PV210_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE0(0),
- .ngpio = S5PV210_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE1(0),
- .ngpio = S5PV210_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF0(0),
- .ngpio = S5PV210_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF1(0),
- .ngpio = S5PV210_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF2(0),
- .ngpio = S5PV210_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF3(0),
- .ngpio = S5PV210_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG0(0),
- .ngpio = S5PV210_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG1(0),
- .ngpio = S5PV210_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG2(0),
- .ngpio = S5PV210_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG3(0),
- .ngpio = S5PV210_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_GPI(0),
- .ngpio = S5PV210_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ0(0),
- .ngpio = S5PV210_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ1(0),
- .ngpio = S5PV210_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ2(0),
- .ngpio = S5PV210_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ3(0),
- .ngpio = S5PV210_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ4(0),
- .ngpio = S5PV210_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP01(0),
- .ngpio = S5PV210_GPIO_MP01_NR,
- .label = "MP01",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP02(0),
- .ngpio = S5PV210_GPIO_MP02_NR,
- .label = "MP02",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP03(0),
- .ngpio = S5PV210_GPIO_MP03_NR,
- .label = "MP03",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP04(0),
- .ngpio = S5PV210_GPIO_MP04_NR,
- .label = "MP04",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP05(0),
- .ngpio = S5PV210_GPIO_MP05_NR,
- .label = "MP05",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PV210_GPH0(0),
- .ngpio = S5PV210_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PV210_GPH1(0),
- .ngpio = S5PV210_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PV210_GPH2(0),
- .ngpio = S5PV210_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PV210_GPH3(0),
- .ngpio = S5PV210_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
- int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
- int gpioint_group = 0;
- int i = 0;
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- chip->group = gpioint_group++;
- }
- if (chip->base == NULL)
- chip->base = S5PV210_BANK_BASE(i);
- }
-
- samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
- return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index fab46fe9a71f..8fd354aaf0a7 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U300 machine.
#
-obj-y := core.o clock.o timer.o gpio.o padmux.o
+obj-y := core.o clock.o timer.o padmux.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
deleted file mode 100644
index d92790140fe5..000000000000
--- a/arch/arm/mach-u300/gpio.c
+++ /dev/null
@@ -1,700 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/gpio.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * U300 GPIO module.
- * This can driver either of the two basic GPIO cores
- * available in the U300 platforms:
- * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
- * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-/* Reference to GPIO block clock */
-static struct clk *clk;
-
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
-
-struct u300_gpio_port {
- const char *name;
- int irq;
- int number;
-};
-
-
-static struct u300_gpio_port gpio_ports[] = {
- {
- .name = "gpio0",
- .number = 0,
- },
- {
- .name = "gpio1",
- .number = 1,
- },
- {
- .name = "gpio2",
- .number = 2,
- },
-#ifdef U300_COH901571_3
- {
- .name = "gpio3",
- .number = 3,
- },
- {
- .name = "gpio4",
- .number = 4,
- },
-#ifdef CONFIG_MACH_U300_BS335
- {
- .name = "gpio5",
- .number = 5,
- },
- {
- .name = "gpio6",
- .number = 6,
- },
-#endif
-#endif
-
-};
-
-
-#ifdef U300_COH901571_3
-
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW 0
-#define DEFAULT_OUTPUT_HIGH 1
-
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP 0
-#define ENABLE_PULL_UP 1
-
-#define GPIO_NOT_USED 0
-#define GPIO_IN 1
-#define GPIO_OUT 2
-
-struct u300_gpio_configuration_data {
- unsigned char pin_usage;
- unsigned char default_output_value;
- unsigned char pull_up;
-};
-
-/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
- /* Port 0, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 1, pins 0-7 */
- {
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 2, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
- },
- /* Port 3, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 4, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 5, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 6, pind 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- }
-#endif
-
-#ifdef CONFIG_MACH_U300_BS365
- /* Port 0, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 1, pins 0-7 */
- {
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
- },
- /* Port 2, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
- },
- /* Port 3, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
- },
- /* Port 4, pins 0-7 */
- {
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- /* These 4 pins doesn't exist on DB3210 */
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
- }
-#endif
-};
-#endif
-
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
- int (*callback)(void *);
- void *data;
- int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
- */
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
-{
- if (gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "registered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = func;
- gpio_pin[gpio].data = data;
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_register_callback);
-
-int gpio_unregister_callback(unsigned gpio)
-{
- if (!gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "unregistered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = NULL;
- gpio_pin[gpio].data = NULL;
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_unregister_callback);
-
-/* Non-zero means valid */
-int gpio_is_valid(int number)
-{
- if (number >= 0 &&
- number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
-
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_pin[gpio].users)
- return -EINVAL;
- else
- gpio_pin[gpio].users++;
-
- gpio_users++;
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
- gpio_users--;
- gpio_pin[gpio].users--;
- if (unlikely(gpio_pin[gpio].users < 0)) {
- dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
- gpio);
- gpio_pin[gpio].users = 0;
- }
-
- return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
- return readl(virtbase + U300_GPIO_PXPDIR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- if (value) {
- /* set */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val | (1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- /* clear */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val & ~(1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-int gpio_direction_input(unsigned gpio)
-{
- unsigned long flags;
- u32 val;
-
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin*/
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /* This is not needed since it sets the bits to zero.*/
- /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
- unsigned long flags;
- u32 val;
-
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /*
- * FIXME: configure for push/pull, open drain or open source per pin
- * in setup. The current driver will only support push/pull.
- */
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
- << ((gpio & 0x07) << 1));
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- gpio_set_value(gpio, value);
- local_irq_restore(flags);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
-{
- u32 val;
- unsigned long flags;
- local_irq_save(flags);
-
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val |= (1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- if (edge)
- val |= (1 << (gpio & 0x07));
- else
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-
-void disable_irq_on_gpio_pin(unsigned gpio)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- if (value) {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_pullup);
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
- struct u300_gpio_port *port = dev_id;
- u32 val;
- int pin;
-
- /* Read event register */
- val = readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask with enable register */
- val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask relevant bits */
- val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
- /* ACK IRQ (clear event) */
- writel(val, virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Print message */
- while (val != 0) {
- unsigned gpio;
-
- pin = __ffs(val);
- /* mask off this pin */
- val &= ~(1 << pin);
- gpio = (port->number << 3) + pin;
-
- if (gpio_pin[gpio].callback)
- (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
- else
- dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
- gpio);
- }
- return IRQ_HANDLED;
-}
-
-static void gpio_set_initial_values(void)
-{
-#ifdef U300_COH901571_3
- int i, j;
- unsigned long flags;
- u32 val;
-
- /* Write default values to all pins */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
- }
-
- /*
- * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initialize
- * default value on outputs.
- */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
- if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
- writel(val, virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
- }
- }
-
- /* Enable or disable the internal pull-ups in the GPIO ASIC block */
- for (i = 0; i < U300_GPIO_MAX; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
- }
-#endif
-}
-
-static int __init gpio_probe(struct platform_device *pdev)
-{
- u32 val;
- int err = 0;
- int i;
- int num_irqs;
-
- gpiodev = &pdev->dev;
- memset(gpio_pin, 0, sizeof(gpio_pin));
-
- /* Get GPIO clock */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- dev_err(gpiodev, "could not get GPIO clock\n");
- goto err_no_clk;
- }
- err = clk_enable(clk);
- if (err) {
- dev_err(gpiodev, "could not enable GPIO clock\n");
- goto err_no_clk_enable;
- }
-
- memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memres)
- goto err_no_resource;
-
- if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
- == NULL) {
- err = -ENODEV;
- goto err_no_ioregion;
- }
-
- virtbase = ioremap(memres->start, resource_size(memres));
- if (!virtbase) {
- err = -ENOMEM;
- goto err_no_ioremap;
- }
- dev_info(gpiodev, "remapped 0x%08x to %p\n",
- memres->start, virtbase);
-
-#ifdef U300_COH901335
- dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
- /* Turn on the GPIO block */
- writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
- dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
- val = readl(virtbase + U300_GPIO_CR);
- dev_info(gpiodev, "COH901571/3 block version: %d, " \
- "number of cores: %d\n",
- ((val & 0x0000FE00) >> 9),
- ((val & 0x000001FC) >> 2));
- writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
- gpio_set_initial_values();
-
- for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
- gpio_ports[num_irqs].irq =
- platform_get_irq_byname(pdev,
- gpio_ports[num_irqs].name);
-
- err = request_irq(gpio_ports[num_irqs].irq,
- gpio_irq_handler, IRQF_DISABLED,
- gpio_ports[num_irqs].name,
- &gpio_ports[num_irqs]);
- if (err) {
- dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
- gpio_ports[num_irqs].name);
- goto err_no_irq;
- }
- /* Turns off PortX_irq_force */
- writel(0x0, virtbase + U300_GPIO_PXIFR +
- num_irqs * U300_GPIO_PORTX_SPACING);
- }
-
- return 0;
-
- err_no_irq:
- for (i = 0; i < num_irqs; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- err_no_ioremap:
- release_mem_region(memres->start, memres->end - memres->start);
- err_no_ioregion:
- err_no_resource:
- clk_disable(clk);
- err_no_clk_enable:
- clk_put(clk);
- err_no_clk:
- dev_info(gpiodev, "module ERROR:%d\n", err);
- return err;
-}
-
-static int __exit gpio_remove(struct platform_device *pdev)
-{
- int i;
-
- /* Turn off the GPIO block */
- writel(0x00000000U, virtbase + U300_GPIO_CR);
- for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- release_mem_region(memres->start, memres->end - memres->start);
- clk_disable(clk);
- clk_put(clk);
- return 0;
-}
-
-static struct platform_driver gpio_driver = {
- .driver = {
- .name = "u300-gpio",
- },
- .remove = __exit_p(gpio_remove),
-};
-
-
-static int __init u300_gpio_init(void)
-{
- return platform_driver_probe(&gpio_driver, gpio_probe);
-}
-
-static void __exit u300_gpio_exit(void)
-{
- platform_driver_unregister(&gpio_driver);
-}
-
-arch_initcall(u300_gpio_init);
-module_exit(u300_gpio_exit);
-
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 54429d015954..f8b9392ee347 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,6 @@ config UX500_SOC_COMMON
default y
select ARM_GIC
select HAS_MTU
- select NOMADIK_GPIO
select ARM_ERRATA_753970
menu "Ux500 SoC"
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 18296ee68802..ce659015535e 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -21,9 +21,4 @@ config HAS_MTU
to multiple interrupt generating programmable
32-bit free running decrementing counters.
-config NOMADIK_GPIO
- bool
- help
- Support for the Nomadik GPIO controller.
-
endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
index c33547361bd7..37c7cdd0f8f0 100644
--- a/arch/arm/plat-nomadik/Makefile
+++ b/arch/arm/plat-nomadik/Makefile
@@ -3,4 +3,3 @@
# Licensed under GPLv2
obj-$(CONFIG_HAS_MTU) += timer.o
-obj-$(CONFIG_NOMADIK_GPIO) += gpio.o
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
deleted file mode 100644
index 307b8131aa8c..000000000000
--- a/arch/arm/plat-nomadik/gpio.c
+++ /dev/null
@@ -1,1020 +0,0 @@
-/*
- * Generic GPIO driver for logic cells found in the Nomadik SoC
- *
- * Copyright (C) 2008,2009 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-
-#include <asm/mach/irq.h>
-
-#include <plat/pincfg.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-
-/*
- * The GPIO module in the Nomadik family of Systems-on-Chip is an
- * AMBA device, managing 32 pins and alternate functions. The logic block
- * is currently used in the Nomadik and ux500.
- *
- * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
- */
-
-#define NMK_GPIO_PER_CHIP 32
-
-struct nmk_gpio_chip {
- struct gpio_chip chip;
- void __iomem *addr;
- struct clk *clk;
- unsigned int bank;
- unsigned int parent_irq;
- int secondary_parent_irq;
- u32 (*get_secondary_status)(unsigned int bank);
- void (*set_ioforce)(bool enable);
- spinlock_t lock;
- /* Keep track of configured edges */
- u32 edge_rising;
- u32 edge_falling;
- u32 real_wake;
- u32 rwimsc;
- u32 fwimsc;
- u32 slpm;
- u32 enabled;
-};
-
-static struct nmk_gpio_chip *
-nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)];
-
-static DEFINE_SPINLOCK(nmk_gpio_slpm_lock);
-
-#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips)
-
-static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
- unsigned offset, int gpio_mode)
-{
- u32 bit = 1 << offset;
- u32 afunc, bfunc;
-
- afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
- bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
- if (gpio_mode & NMK_GPIO_ALT_A)
- afunc |= bit;
- if (gpio_mode & NMK_GPIO_ALT_B)
- bfunc |= bit;
- writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
- writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
-}
-
-static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
- unsigned offset, enum nmk_gpio_slpm mode)
-{
- u32 bit = 1 << offset;
- u32 slpm;
-
- slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
- if (mode == NMK_GPIO_SLPM_NOCHANGE)
- slpm |= bit;
- else
- slpm &= ~bit;
- writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
-}
-
-static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
- unsigned offset, enum nmk_gpio_pull pull)
-{
- u32 bit = 1 << offset;
- u32 pdis;
-
- pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
- if (pull == NMK_GPIO_PULL_NONE)
- pdis |= bit;
- else
- pdis &= ~bit;
- writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
-
- if (pull == NMK_GPIO_PULL_UP)
- writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
- else if (pull == NMK_GPIO_PULL_DOWN)
- writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
-}
-
-static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
- unsigned offset)
-{
- writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
-}
-
-static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
- unsigned offset, int val)
-{
- if (val)
- writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
- else
- writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
-}
-
-static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
- unsigned offset, int val)
-{
- writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
- __nmk_gpio_set_output(nmk_chip, offset, val);
-}
-
-static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip,
- unsigned offset, int gpio_mode,
- bool glitch)
-{
- u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
- u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-
- if (glitch && nmk_chip->set_ioforce) {
- u32 bit = BIT(offset);
-
- /* Prevent spurious wakeups */
- writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC);
- writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC);
-
- nmk_chip->set_ioforce(true);
- }
-
- __nmk_gpio_set_mode(nmk_chip, offset, gpio_mode);
-
- if (glitch && nmk_chip->set_ioforce) {
- nmk_chip->set_ioforce(false);
-
- writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC);
- writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC);
- }
-}
-
-static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
- pin_cfg_t cfg, bool sleep, unsigned int *slpmregs)
-{
- static const char *afnames[] = {
- [NMK_GPIO_ALT_GPIO] = "GPIO",
- [NMK_GPIO_ALT_A] = "A",
- [NMK_GPIO_ALT_B] = "B",
- [NMK_GPIO_ALT_C] = "C"
- };
- static const char *pullnames[] = {
- [NMK_GPIO_PULL_NONE] = "none",
- [NMK_GPIO_PULL_UP] = "up",
- [NMK_GPIO_PULL_DOWN] = "down",
- [3] /* illegal */ = "??"
- };
- static const char *slpmnames[] = {
- [NMK_GPIO_SLPM_INPUT] = "input/wakeup",
- [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup",
- };
-
- int pin = PIN_NUM(cfg);
- int pull = PIN_PULL(cfg);
- int af = PIN_ALT(cfg);
- int slpm = PIN_SLPM(cfg);
- int output = PIN_DIR(cfg);
- int val = PIN_VAL(cfg);
- bool glitch = af == NMK_GPIO_ALT_C;
-
- dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
- pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
- output ? "output " : "input",
- output ? (val ? "high" : "low") : "");
-
- if (sleep) {
- int slpm_pull = PIN_SLPM_PULL(cfg);
- int slpm_output = PIN_SLPM_DIR(cfg);
- int slpm_val = PIN_SLPM_VAL(cfg);
-
- af = NMK_GPIO_ALT_GPIO;
-
- /*
- * The SLPM_* values are normal values + 1 to allow zero to
- * mean "same as normal".
- */
- if (slpm_pull)
- pull = slpm_pull - 1;
- if (slpm_output)
- output = slpm_output - 1;
- if (slpm_val)
- val = slpm_val - 1;
-
- dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
- pin,
- slpm_pull ? pullnames[pull] : "same",
- slpm_output ? (output ? "output" : "input") : "same",
- slpm_val ? (val ? "high" : "low") : "same");
- }
-
- if (output)
- __nmk_gpio_make_output(nmk_chip, offset, val);
- else {
- __nmk_gpio_make_input(nmk_chip, offset);
- __nmk_gpio_set_pull(nmk_chip, offset, pull);
- }
-
- /*
- * If we've backed up the SLPM registers (glitch workaround), modify
- * the backups since they will be restored.
- */
- if (slpmregs) {
- if (slpm == NMK_GPIO_SLPM_NOCHANGE)
- slpmregs[nmk_chip->bank] |= BIT(offset);
- else
- slpmregs[nmk_chip->bank] &= ~BIT(offset);
- } else
- __nmk_gpio_set_slpm(nmk_chip, offset, slpm);
-
- __nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch);
-}
-
-/*
- * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
- * - Save SLPM registers
- * - Set SLPM=0 for the IOs you want to switch and others to 1
- * - Configure the GPIO registers for the IOs that are being switched
- * - Set IOFORCE=1
- * - Modify the AFLSA/B registers for the IOs that are being switched
- * - Set IOFORCE=0
- * - Restore SLPM registers
- * - Any spurious wake up event during switch sequence to be ignored and
- * cleared
- */
-static void nmk_gpio_glitch_slpm_init(unsigned int *slpm)
-{
- int i;
-
- for (i = 0; i < NUM_BANKS; i++) {
- struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
- unsigned int temp = slpm[i];
-
- if (!chip)
- break;
-
- slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
- writel(temp, chip->addr + NMK_GPIO_SLPC);
- }
-}
-
-static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm)
-{
- int i;
-
- for (i = 0; i < NUM_BANKS; i++) {
- struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-
- if (!chip)
- break;
-
- writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
- }
-}
-
-static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
-{
- static unsigned int slpm[NUM_BANKS];
- unsigned long flags;
- bool glitch = false;
- int ret = 0;
- int i;
-
- for (i = 0; i < num; i++) {
- if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) {
- glitch = true;
- break;
- }
- }
-
- spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
-
- if (glitch) {
- memset(slpm, 0xff, sizeof(slpm));
-
- for (i = 0; i < num; i++) {
- int pin = PIN_NUM(cfgs[i]);
- int offset = pin % NMK_GPIO_PER_CHIP;
-
- if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C)
- slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset);
- }
-
- nmk_gpio_glitch_slpm_init(slpm);
- }
-
- for (i = 0; i < num; i++) {
- struct nmk_gpio_chip *nmk_chip;
- int pin = PIN_NUM(cfgs[i]);
-
- nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin));
- if (!nmk_chip) {
- ret = -EINVAL;
- break;
- }
-
- spin_lock(&nmk_chip->lock);
- __nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base,
- cfgs[i], sleep, glitch ? slpm : NULL);
- spin_unlock(&nmk_chip->lock);
- }
-
- if (glitch)
- nmk_gpio_glitch_slpm_restore(slpm);
-
- spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
- return ret;
-}
-
-/**
- * nmk_config_pin - configure a pin's mux attributes
- * @cfg: pin confguration
- *
- * Configures a pin's mode (alternate function or GPIO), its pull up status,
- * and its sleep mode based on the specified configuration. The @cfg is
- * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These
- * are constructed using, and can be further enhanced with, the macros in
- * plat/pincfg.h.
- *
- * If a pin's mode is set to GPIO, it is configured as an input to avoid
- * side-effects. The gpio can be manipulated later using standard GPIO API
- * calls.
- */
-int nmk_config_pin(pin_cfg_t cfg, bool sleep)
-{
- return __nmk_config_pins(&cfg, 1, sleep);
-}
-EXPORT_SYMBOL(nmk_config_pin);
-
-/**
- * nmk_config_pins - configure several pins at once
- * @cfgs: array of pin configurations
- * @num: number of elments in the array
- *
- * Configures several pins using nmk_config_pin(). Refer to that function for
- * further information.
- */
-int nmk_config_pins(pin_cfg_t *cfgs, int num)
-{
- return __nmk_config_pins(cfgs, num, false);
-}
-EXPORT_SYMBOL(nmk_config_pins);
-
-int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
-{
- return __nmk_config_pins(cfgs, num, true);
-}
-EXPORT_SYMBOL(nmk_config_pins_sleep);
-
-/**
- * nmk_gpio_set_slpm() - configure the sleep mode of a pin
- * @gpio: pin number
- * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
- *
- * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is
- * changed to an input (with pullup/down enabled) in sleep and deep sleep. If
- * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
- * configured even when in sleep and deep sleep.
- *
- * On DB8500v2 onwards, this setting loses the previous meaning and instead
- * indicates if wakeup detection is enabled on the pin. Note that
- * enable_irq_wake() will automatically enable wakeup detection.
- */
-int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
-{
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
-
- nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
- if (!nmk_chip)
- return -EINVAL;
-
- spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
- spin_lock(&nmk_chip->lock);
-
- __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
-
- spin_unlock(&nmk_chip->lock);
- spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
- return 0;
-}
-
-/**
- * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
- * @gpio: pin number
- * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
- *
- * Enables/disables pull up/down on a specified pin. This only takes effect if
- * the pin is configured as an input (either explicitly or by the alternate
- * function).
- *
- * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
- * configured as an input. Otherwise, due to the way the controller registers
- * work, this function will change the value output on the pin.
- */
-int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
-{
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
-
- nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
- if (!nmk_chip)
- return -EINVAL;
-
- spin_lock_irqsave(&nmk_chip->lock, flags);
- __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
- spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
- return 0;
-}
-
-/* Mode functions */
-/**
- * nmk_gpio_set_mode() - set the mux mode of a gpio pin
- * @gpio: pin number
- * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A,
- * NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C
- *
- * Sets the mode of the specified pin to one of the alternate functions or
- * plain GPIO.
- */
-int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
-
- nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
- if (!nmk_chip)
- return -EINVAL;
-
- spin_lock_irqsave(&nmk_chip->lock, flags);
- __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
- spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(nmk_gpio_set_mode);
-
-int nmk_gpio_get_mode(int gpio)
-{
- struct nmk_gpio_chip *nmk_chip;
- u32 afunc, bfunc, bit;
-
- nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
- if (!nmk_chip)
- return -EINVAL;
-
- bit = 1 << (gpio - nmk_chip->chip.base);
-
- afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
- bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
-
- return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
-}
-EXPORT_SYMBOL(nmk_gpio_get_mode);
-
-
-/* IRQ functions */
-static inline int nmk_gpio_get_bitmask(int gpio)
-{
- return 1 << (gpio % 32);
-}
-
-static void nmk_gpio_irq_ack(struct irq_data *d)
-{
- int gpio;
- struct nmk_gpio_chip *nmk_chip;
-
- gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
- nmk_chip = irq_data_get_irq_chip_data(d);
- if (!nmk_chip)
- return;
- writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
-}
-
-enum nmk_gpio_irq_type {
- NORMAL,
- WAKE,
-};
-
-static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
- int gpio, enum nmk_gpio_irq_type which,
- bool enable)
-{
- u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
- u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
- u32 bitmask = nmk_gpio_get_bitmask(gpio);
- u32 reg;
-
- /* we must individually set/clear the two edges */
- if (nmk_chip->edge_rising & bitmask) {
- reg = readl(nmk_chip->addr + rimsc);
- if (enable)
- reg |= bitmask;
- else
- reg &= ~bitmask;
- writel(reg, nmk_chip->addr + rimsc);
- }
- if (nmk_chip->edge_falling & bitmask) {
- reg = readl(nmk_chip->addr + fimsc);
- if (enable)
- reg |= bitmask;
- else
- reg &= ~bitmask;
- writel(reg, nmk_chip->addr + fimsc);
- }
-}
-
-static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
- int gpio, bool on)
-{
- __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
-}
-
-static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
-{
- int gpio;
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
- u32 bitmask;
-
- gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
- nmk_chip = irq_data_get_irq_chip_data(d);
- bitmask = nmk_gpio_get_bitmask(gpio);
- if (!nmk_chip)
- return -EINVAL;
-
- if (enable)
- nmk_chip->enabled |= bitmask;
- else
- nmk_chip->enabled &= ~bitmask;
-
- spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
- spin_lock(&nmk_chip->lock);
-
- __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable);
-
- if (!(nmk_chip->real_wake & bitmask))
- __nmk_gpio_set_wake(nmk_chip, gpio, enable);
-
- spin_unlock(&nmk_chip->lock);
- spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
- return 0;
-}
-
-static void nmk_gpio_irq_mask(struct irq_data *d)
-{
- nmk_gpio_irq_maskunmask(d, false);
-}
-
-static void nmk_gpio_irq_unmask(struct irq_data *d)
-{
- nmk_gpio_irq_maskunmask(d, true);
-}
-
-static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
- u32 bitmask;
- int gpio;
-
- gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
- nmk_chip = irq_data_get_irq_chip_data(d);
- if (!nmk_chip)
- return -EINVAL;
- bitmask = nmk_gpio_get_bitmask(gpio);
-
- spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
- spin_lock(&nmk_chip->lock);
-
- if (!(nmk_chip->enabled & bitmask))
- __nmk_gpio_set_wake(nmk_chip, gpio, on);
-
- if (on)
- nmk_chip->real_wake |= bitmask;
- else
- nmk_chip->real_wake &= ~bitmask;
-
- spin_unlock(&nmk_chip->lock);
- spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
- return 0;
-}
-
-static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
-{
- bool enabled, wake = irqd_is_wakeup_set(d);
- int gpio;
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
- u32 bitmask;
-
- gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
- nmk_chip = irq_data_get_irq_chip_data(d);
- bitmask = nmk_gpio_get_bitmask(gpio);
- if (!nmk_chip)
- return -EINVAL;
-
- if (type & IRQ_TYPE_LEVEL_HIGH)
- return -EINVAL;
- if (type & IRQ_TYPE_LEVEL_LOW)
- return -EINVAL;
-
- enabled = nmk_chip->enabled & bitmask;
-
- spin_lock_irqsave(&nmk_chip->lock, flags);
-
- if (enabled)
- __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
-
- if (enabled || wake)
- __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
-
- nmk_chip->edge_rising &= ~bitmask;
- if (type & IRQ_TYPE_EDGE_RISING)
- nmk_chip->edge_rising |= bitmask;
-
- nmk_chip->edge_falling &= ~bitmask;
- if (type & IRQ_TYPE_EDGE_FALLING)
- nmk_chip->edge_falling |= bitmask;
-
- if (enabled)
- __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
-
- if (enabled || wake)
- __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
-
- spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
- return 0;
-}
-
-static struct irq_chip nmk_gpio_irq_chip = {
- .name = "Nomadik-GPIO",
- .irq_ack = nmk_gpio_irq_ack,
- .irq_mask = nmk_gpio_irq_mask,
- .irq_unmask = nmk_gpio_irq_unmask,
- .irq_set_type = nmk_gpio_irq_set_type,
- .irq_set_wake = nmk_gpio_irq_set_wake,
-};
-
-static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
- u32 status)
-{
- struct nmk_gpio_chip *nmk_chip;
- struct irq_chip *host_chip = irq_get_chip(irq);
- unsigned int first_irq;
-
- chained_irq_enter(host_chip, desc);
-
- nmk_chip = irq_get_handler_data(irq);
- first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
- while (status) {
- int bit = __ffs(status);
-
- generic_handle_irq(first_irq + bit);
- status &= ~BIT(bit);
- }
-
- chained_irq_exit(host_chip, desc);
-}
-
-static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
- u32 status = readl(nmk_chip->addr + NMK_GPIO_IS);
-
- __nmk_gpio_irq_handler(irq, desc, status);
-}
-
-static void nmk_gpio_secondary_irq_handler(unsigned int irq,
- struct irq_desc *desc)
-{
- struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
- u32 status = nmk_chip->get_secondary_status(nmk_chip->bank);
-
- __nmk_gpio_irq_handler(irq, desc, status);
-}
-
-static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
-{
- unsigned int first_irq;
- int i;
-
- first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
- for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) {
- irq_set_chip_and_handler(i, &nmk_gpio_irq_chip,
- handle_edge_irq);
- set_irq_flags(i, IRQF_VALID);
- irq_set_chip_data(i, nmk_chip);
- irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING);
- }
-
- irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
- irq_set_handler_data(nmk_chip->parent_irq, nmk_chip);
-
- if (nmk_chip->secondary_parent_irq >= 0) {
- irq_set_chained_handler(nmk_chip->secondary_parent_irq,
- nmk_gpio_secondary_irq_handler);
- irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip);
- }
-
- return 0;
-}
-
-/* I/O Functions */
-static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
-{
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
-
- writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
- return 0;
-}
-
-static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
-{
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
- u32 bit = 1 << offset;
-
- return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
-}
-
-static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
- int val)
-{
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
-
- __nmk_gpio_set_output(nmk_chip, offset, val);
-}
-
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
- int val)
-{
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
-
- __nmk_gpio_make_output(nmk_chip, offset, val);
-
- return 0;
-}
-
-static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
-
- return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/seq_file.h>
-
-static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
- int mode;
- unsigned i;
- unsigned gpio = chip->base;
- int is_out;
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
- const char *modes[] = {
- [NMK_GPIO_ALT_GPIO] = "gpio",
- [NMK_GPIO_ALT_A] = "altA",
- [NMK_GPIO_ALT_B] = "altB",
- [NMK_GPIO_ALT_C] = "altC",
- };
-
- for (i = 0; i < chip->ngpio; i++, gpio++) {
- const char *label = gpiochip_is_requested(chip, i);
- bool pull;
- u32 bit = 1 << i;
-
- if (!label)
- continue;
-
- is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit;
- pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
- mode = nmk_gpio_get_mode(gpio);
- seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
- gpio, label,
- is_out ? "out" : "in ",
- chip->get
- ? (chip->get(chip, i) ? "hi" : "lo")
- : "? ",
- (mode < 0) ? "unknown" : modes[mode],
- pull ? "pull" : "none");
- seq_printf(s, "\n");
- }
-}
-
-#else
-#define nmk_gpio_dbg_show NULL
-#endif
-
-/* This structure is replicated for each GPIO block allocated at probe time */
-static struct gpio_chip nmk_gpio_template = {
- .direction_input = nmk_gpio_make_input,
- .get = nmk_gpio_get_input,
- .direction_output = nmk_gpio_make_output,
- .set = nmk_gpio_set_output,
- .to_irq = nmk_gpio_to_irq,
- .dbg_show = nmk_gpio_dbg_show,
- .can_sleep = 0,
-};
-
-/*
- * Called from the suspend/resume path to only keep the real wakeup interrupts
- * (those that have had set_irq_wake() called on them) as wakeup interrupts,
- * and not the rest of the interrupts which we needed to have as wakeups for
- * cpuidle.
- *
- * PM ops are not used since this needs to be done at the end, after all the
- * other drivers are done with their suspend callbacks.
- */
-void nmk_gpio_wakeups_suspend(void)
-{
- int i;
-
- for (i = 0; i < NUM_BANKS; i++) {
- struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-
- if (!chip)
- break;
-
- chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC);
- chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC);
-
- writel(chip->rwimsc & chip->real_wake,
- chip->addr + NMK_GPIO_RWIMSC);
- writel(chip->fwimsc & chip->real_wake,
- chip->addr + NMK_GPIO_FWIMSC);
-
- if (cpu_is_u8500v2()) {
- chip->slpm = readl(chip->addr + NMK_GPIO_SLPC);
-
- /* 0 -> wakeup enable */
- writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC);
- }
- }
-}
-
-void nmk_gpio_wakeups_resume(void)
-{
- int i;
-
- for (i = 0; i < NUM_BANKS; i++) {
- struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-
- if (!chip)
- break;
-
- writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
- writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
-
- if (cpu_is_u8500v2())
- writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
- }
-}
-
-static int __devinit nmk_gpio_probe(struct platform_device *dev)
-{
- struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
- struct nmk_gpio_chip *nmk_chip;
- struct gpio_chip *chip;
- struct resource *res;
- struct clk *clk;
- int secondary_irq;
- int irq;
- int ret;
-
- if (!pdata)
- return -ENODEV;
-
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto out;
- }
-
- irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- ret = irq;
- goto out;
- }
-
- secondary_irq = platform_get_irq(dev, 1);
- if (secondary_irq >= 0 && !pdata->get_secondary_status) {
- ret = -EINVAL;
- goto out;
- }
-
- if (request_mem_region(res->start, resource_size(res),
- dev_name(&dev->dev)) == NULL) {
- ret = -EBUSY;
- goto out;
- }
-
- clk = clk_get(&dev->dev, NULL);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- goto out_release;
- }
-
- clk_enable(clk);
-
- nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
- if (!nmk_chip) {
- ret = -ENOMEM;
- goto out_clk;
- }
- /*
- * The virt address in nmk_chip->addr is in the nomadik register space,
- * so we can simply convert the resource address, without remapping
- */
- nmk_chip->bank = dev->id;
- nmk_chip->clk = clk;
- nmk_chip->addr = io_p2v(res->start);
- nmk_chip->chip = nmk_gpio_template;
- nmk_chip->parent_irq = irq;
- nmk_chip->secondary_parent_irq = secondary_irq;
- nmk_chip->get_secondary_status = pdata->get_secondary_status;
- nmk_chip->set_ioforce = pdata->set_ioforce;
- spin_lock_init(&nmk_chip->lock);
-
- chip = &nmk_chip->chip;
- chip->base = pdata->first_gpio;
- chip->ngpio = pdata->num_gpio;
- chip->label = pdata->name ?: dev_name(&dev->dev);
- chip->dev = &dev->dev;
- chip->owner = THIS_MODULE;
-
- ret = gpiochip_add(&nmk_chip->chip);
- if (ret)
- goto out_free;
-
- BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
-
- nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
- platform_set_drvdata(dev, nmk_chip);
-
- nmk_gpio_init_irq(nmk_chip);
-
- dev_info(&dev->dev, "Bits %i-%i at address %p\n",
- nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
- return 0;
-
-out_free:
- kfree(nmk_chip);
-out_clk:
- clk_disable(clk);
- clk_put(clk);
-out_release:
- release_mem_region(res->start, resource_size(res));
-out:
- dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
- pdata->first_gpio, pdata->first_gpio+31);
- return ret;
-}
-
-static struct platform_driver nmk_gpio_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "gpio",
- },
- .probe = nmk_gpio_probe,
-};
-
-static int __init nmk_gpio_init(void)
-{
- return platform_driver_register(&nmk_gpio_driver);
-}
-
-core_initcall(nmk_gpio_init);
-
-MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
-MODULE_DESCRIPTION("Nomadik GPIO Driver");
-MODULE_LICENSE("GPL");
-
-
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 1b9f6f0843d1..ea19a5b2f227 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -78,6 +78,8 @@ extern int nmk_gpio_get_mode(int gpio);
extern void nmk_gpio_wakeups_suspend(void);
extern void nmk_gpio_wakeups_resume(void);
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
/*
* Platform data to register a block: only the initial gpio/irq number.
*/
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a4a12859fdd5..f0233e6abcdf 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
usb.o fb.o io.o counter_32k.o
obj-m :=
obj-n :=
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
deleted file mode 100644
index efb869390199..000000000000
--- a/arch/arm/plat-omap/gpio.c
+++ /dev/null
@@ -1,2112 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/gpio.c
- *
- * Support functions for OMAP GPIO
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/syscore_ops.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/gpio.h>
-#include <asm/mach/irq.h>
-
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT 0x00
-#define OMAP1510_GPIO_DATA_OUTPUT 0x04
-#define OMAP1510_GPIO_DIR_CONTROL 0x08
-#define OMAP1510_GPIO_INT_CONTROL 0x0c
-#define OMAP1510_GPIO_INT_MASK 0x10
-#define OMAP1510_GPIO_INT_STATUS 0x14
-#define OMAP1510_GPIO_PIN_CONTROL 0x18
-
-#define OMAP1510_IH_GPIO_BASE 64
-
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION 0x0000
-#define OMAP1610_GPIO_SYSCONFIG 0x0010
-#define OMAP1610_GPIO_SYSSTATUS 0x0014
-#define OMAP1610_GPIO_IRQSTATUS1 0x0018
-#define OMAP1610_GPIO_IRQENABLE1 0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
-#define OMAP1610_GPIO_DATAIN 0x002c
-#define OMAP1610_GPIO_DATAOUT 0x0030
-#define OMAP1610_GPIO_DIRECTION 0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
-
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT 0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
-#define OMAP7XX_GPIO_DIR_CONTROL 0x08
-#define OMAP7XX_GPIO_INT_CONTROL 0x0c
-#define OMAP7XX_GPIO_INT_MASK 0x10
-#define OMAP7XX_GPIO_INT_STATUS 0x14
-
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION 0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
-#define OMAP24XX_GPIO_IRQENABLE2 0x002c
-#define OMAP24XX_GPIO_IRQENABLE1 0x001c
-#define OMAP24XX_GPIO_WAKE_EN 0x0020
-#define OMAP24XX_GPIO_CTRL 0x0030
-#define OMAP24XX_GPIO_OE 0x0034
-#define OMAP24XX_GPIO_DATAIN 0x0038
-#define OMAP24XX_GPIO_DATAOUT 0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
-#define OMAP24XX_GPIO_RISINGDETECT 0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
-#define OMAP24XX_GPIO_SETWKUENA 0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
-#define OMAP24XX_GPIO_SETDATAOUT 0x0094
-
-#define OMAP4_GPIO_REVISION 0x0000
-#define OMAP4_GPIO_EOI 0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
-#define OMAP4_GPIO_IRQSTATUS0 0x002c
-#define OMAP4_GPIO_IRQSTATUS1 0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
-#define OMAP4_GPIO_IRQWAKEN0 0x0044
-#define OMAP4_GPIO_IRQWAKEN1 0x0048
-#define OMAP4_GPIO_IRQENABLE1 0x011c
-#define OMAP4_GPIO_WAKE_EN 0x0120
-#define OMAP4_GPIO_IRQSTATUS2 0x0128
-#define OMAP4_GPIO_IRQENABLE2 0x012c
-#define OMAP4_GPIO_CTRL 0x0130
-#define OMAP4_GPIO_OE 0x0134
-#define OMAP4_GPIO_DATAIN 0x0138
-#define OMAP4_GPIO_DATAOUT 0x013c
-#define OMAP4_GPIO_LEVELDETECT0 0x0140
-#define OMAP4_GPIO_LEVELDETECT1 0x0144
-#define OMAP4_GPIO_RISINGDETECT 0x0148
-#define OMAP4_GPIO_FALLINGDETECT 0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
-#define OMAP4_GPIO_SETIRQENABLE1 0x0164
-#define OMAP4_GPIO_CLEARWKUENA 0x0180
-#define OMAP4_GPIO_SETWKUENA 0x0184
-#define OMAP4_GPIO_CLEARDATAOUT 0x0190
-#define OMAP4_GPIO_SETDATAOUT 0x0194
-
-struct gpio_bank {
- unsigned long pbase;
- void __iomem *base;
- u16 irq;
- u16 virtual_irq_start;
- int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- u32 suspend_wakeup;
- u32 saved_wakeup;
-#endif
- u32 non_wakeup_gpios;
- u32 enabled_non_wakeup_gpios;
-
- u32 saved_datain;
- u32 saved_fallingdetect;
- u32 saved_risingdetect;
- u32 level_mask;
- u32 toggle_mask;
- spinlock_t lock;
- struct gpio_chip chip;
- struct clk *dbck;
- u32 mod_usage;
- u32 dbck_enable_mask;
- struct device *dev;
- bool dbck_flag;
- int stride;
-};
-
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
- u32 irqenable1;
- u32 irqenable2;
- u32 wake_en;
- u32 ctrl;
- u32 oe;
- u32 leveldetect0;
- u32 leveldetect1;
- u32 risingdetect;
- u32 fallingdetect;
- u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
-/*
- * TODO: Cleanup gpio_bank usage as it is having information
- * related to all instances of the device
- */
-static struct gpio_bank *gpio_bank;
-
-static int bank_width;
-
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-int gpio_bank_count;
-
-static inline struct gpio_bank *get_gpio_bank(int gpio)
-{
- if (cpu_is_omap15xx()) {
- if (OMAP_GPIO_IS_MPUIO(gpio))
- return &gpio_bank[0];
- return &gpio_bank[1];
- }
- if (cpu_is_omap16xx()) {
- if (OMAP_GPIO_IS_MPUIO(gpio))
- return &gpio_bank[0];
- return &gpio_bank[1 + (gpio >> 4)];
- }
- if (cpu_is_omap7xx()) {
- if (OMAP_GPIO_IS_MPUIO(gpio))
- return &gpio_bank[0];
- return &gpio_bank[1 + (gpio >> 5)];
- }
- if (cpu_is_omap24xx())
- return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx() || cpu_is_omap44xx())
- return &gpio_bank[gpio >> 5];
- BUG();
- return NULL;
-}
-
-static inline int get_gpio_index(int gpio)
-{
- if (cpu_is_omap7xx())
- return gpio & 0x1f;
- if (cpu_is_omap24xx())
- return gpio & 0x1f;
- if (cpu_is_omap34xx() || cpu_is_omap44xx())
- return gpio & 0x1f;
- return gpio & 0x0f;
-}
-
-static inline int gpio_valid(int gpio)
-{
- if (gpio < 0)
- return -1;
- if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
- if (gpio >= OMAP_MAX_GPIO_LINES + 16)
- return -1;
- return 0;
- }
- if (cpu_is_omap15xx() && gpio < 16)
- return 0;
- if ((cpu_is_omap16xx()) && gpio < 64)
- return 0;
- if (cpu_is_omap7xx() && gpio < 192)
- return 0;
- if (cpu_is_omap2420() && gpio < 128)
- return 0;
- if (cpu_is_omap2430() && gpio < 160)
- return 0;
- if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
- return 0;
- return -1;
-}
-
-static int check_gpio(int gpio)
-{
- if (unlikely(gpio_valid(gpio) < 0)) {
- printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
- dump_stack();
- return -1;
- }
- return 0;
-}
-
-static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
-{
- void __iomem *reg = bank->base;
- u32 l;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DIR_CONTROL;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_OE;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
- l = __raw_readl(reg);
- if (is_input)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- __raw_writel(l, reg);
-}
-
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
-{
- void __iomem *reg = bank->base;
- u32 l = 0;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_OUTPUT / bank->stride;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (enable)
- reg += OMAP1610_GPIO_SET_DATAOUT;
- else
- reg += OMAP1610_GPIO_CLEAR_DATAOUT;
- l = 1 << gpio;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- if (enable)
- reg += OMAP24XX_GPIO_SETDATAOUT;
- else
- reg += OMAP24XX_GPIO_CLEARDATAOUT;
- l = 1 << gpio;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- if (enable)
- reg += OMAP4_GPIO_SETDATAOUT;
- else
- reg += OMAP4_GPIO_CLEARDATAOUT;
- l = 1 << gpio;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
- __raw_writel(l, reg);
-}
-
-static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
-{
- void __iomem *reg;
-
- if (check_gpio(gpio) < 0)
- return -EINVAL;
- reg = bank->base;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_INPUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DATAIN;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_INPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAIN;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_DATAIN;
- break;
-#endif
- default:
- return -EINVAL;
- }
- return (__raw_readl(reg)
- & (1 << get_gpio_index(gpio))) != 0;
-}
-
-static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
-{
- void __iomem *reg;
-
- if (check_gpio(gpio) < 0)
- return -EINVAL;
- reg = bank->base;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_OUTPUT / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_OUTPUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DATAOUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_OUTPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAOUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_DATAOUT;
- break;
-#endif
- default:
- return -EINVAL;
- }
-
- return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
-}
-
-#define MOD_REG_BIT(reg, bit_mask, set) \
-do { \
- int l = __raw_readl(base + reg); \
- if (set) l |= bit_mask; \
- else l &= ~bit_mask; \
- __raw_writel(l, base + reg); \
-} while(0)
-
-/**
- * _set_gpio_debounce - low level gpio debounce time
- * @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
- * @debounce: debounce time to use
- *
- * OMAP's debounce time is in 31us steps so we need
- * to convert and round up to the closest unit.
- */
-static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
- unsigned debounce)
-{
- void __iomem *reg = bank->base;
- u32 val;
- u32 l;
-
- if (!bank->dbck_flag)
- return;
-
- if (debounce < 32)
- debounce = 0x01;
- else if (debounce > 7936)
- debounce = 0xff;
- else
- debounce = (debounce / 0x1f) - 1;
-
- l = 1 << get_gpio_index(gpio);
-
- if (bank->method == METHOD_GPIO_44XX)
- reg += OMAP4_GPIO_DEBOUNCINGTIME;
- else
- reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-
- __raw_writel(debounce, reg);
-
- reg = bank->base;
- if (bank->method == METHOD_GPIO_44XX)
- reg += OMAP4_GPIO_DEBOUNCENABLE;
- else
- reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-
- val = __raw_readl(reg);
-
- if (debounce) {
- val |= l;
- clk_enable(bank->dbck);
- } else {
- val &= ~l;
- clk_disable(bank->dbck);
- }
- bank->dbck_enable_mask = val;
-
- __raw_writel(val, reg);
-}
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
- int trigger)
-{
- void __iomem *base = bank->base;
- u32 gpio_bit = 1 << gpio;
- u32 val;
-
- if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
- } else {
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
- }
- if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
- if (cpu_is_omap44xx()) {
- if (trigger != 0)
- __raw_writel(1 << gpio, bank->base+
- OMAP4_GPIO_IRQWAKEN0);
- else {
- val = __raw_readl(bank->base +
- OMAP4_GPIO_IRQWAKEN0);
- __raw_writel(val & (~(1 << gpio)), bank->base +
- OMAP4_GPIO_IRQWAKEN0);
- }
- } else {
- /*
- * GPIO wakeup request can only be generated on edge
- * transitions
- */
- if (trigger & IRQ_TYPE_EDGE_BOTH)
- __raw_writel(1 << gpio, bank->base
- + OMAP24XX_GPIO_SETWKUENA);
- else
- __raw_writel(1 << gpio, bank->base
- + OMAP24XX_GPIO_CLEARWKUENA);
- }
- }
- /* This part needs to be executed always for OMAP34xx */
- if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
- /*
- * Log the edge gpio and manually trigger the IRQ
- * after resume if the input level changes
- * to avoid irq lost during PER RET/OFF mode
- * Applies for omap2 non-wakeup gpio and all omap3 gpios
- */
- if (trigger & IRQ_TYPE_EDGE_BOTH)
- bank->enabled_non_wakeup_gpios |= gpio_bit;
- else
- bank->enabled_non_wakeup_gpios &= ~gpio_bit;
- }
-
- if (cpu_is_omap44xx()) {
- bank->level_mask =
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
- } else {
- bank->level_mask =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- }
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-/*
- * This only applies to chips that can't do both rising and falling edge
- * detection at once. For all other chips, this function is a noop.
- */
-static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
-{
- void __iomem *reg = bank->base;
- u32 l = 0;
-
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
- break;
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_CONTROL;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_CONTROL;
- break;
-#endif
- default:
- return;
- }
-
- l = __raw_readl(reg);
- if ((l >> gpio) & 1)
- l &= ~(1 << gpio);
- else
- l |= 1 << gpio;
-
- __raw_writel(l, reg);
-}
-#endif
-
-static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
-{
- void __iomem *reg = bank->base;
- u32 l = 0;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_CONTROL;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (gpio & 0x08)
- reg += OMAP1610_GPIO_EDGE_CTRL2;
- else
- reg += OMAP1610_GPIO_EDGE_CTRL1;
- gpio &= 0x07;
- l = __raw_readl(reg);
- l &= ~(3 << (gpio << 1));
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 2 << (gpio << 1);
- if (trigger & IRQ_TYPE_EDGE_FALLING)
- l |= 1 << (gpio << 1);
- if (trigger)
- /* Enable wake-up during idle for dynamic tick */
- __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
- else
- __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_CONTROL;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
- set_24xx_gpio_triggering(bank, gpio, trigger);
- return 0;
-#endif
- default:
- goto bad;
- }
- __raw_writel(l, reg);
- return 0;
-bad:
- return -EINVAL;
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned type)
-{
- struct gpio_bank *bank;
- unsigned gpio;
- int retval;
- unsigned long flags;
-
- if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
- gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- else
- gpio = d->irq - IH_GPIO_BASE;
-
- if (check_gpio(gpio) < 0)
- return -EINVAL;
-
- if (type & ~IRQ_TYPE_SENSE_MASK)
- return -EINVAL;
-
- /* OMAP1 allows only only edge triggering */
- if (!cpu_class_is_omap2()
- && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
- return -EINVAL;
-
- bank = irq_data_get_irq_chip_data(d);
- spin_lock_irqsave(&bank->lock, flags);
- retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
- spin_unlock_irqrestore(&bank->lock, flags);
-
- if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
- __irq_set_handler_locked(d->irq, handle_level_irq);
- else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
- __irq_set_handler_locked(d->irq, handle_edge_irq);
-
- return retval;
-}
-
-static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
-{
- void __iomem *reg = bank->base;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- /* MPUIO irqstatus is reset by reading the status register,
- * so do nothing here */
- return;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_STATUS;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_IRQSTATUS1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_STATUS;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_IRQSTATUS1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_IRQSTATUS0;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
- __raw_writel(gpio_mask, reg);
-
- /* Workaround for clearing DSP GPIO interrupts to allow retention */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
- else if (cpu_is_omap44xx())
- reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
- __raw_writel(gpio_mask, reg);
-
- /* Flush posted write for the irq status to avoid spurious interrupts */
- __raw_readl(reg);
- }
-}
-
-static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
-{
- _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
-}
-
-static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
-{
- void __iomem *reg = bank->base;
- int inv = 0;
- u32 l;
- u32 mask;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- mask = 0xffff;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_MASK;
- mask = 0xffff;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_IRQENABLE1;
- mask = 0xffff;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_MASK;
- mask = 0xffffffff;
- inv = 1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_IRQENABLE1;
- mask = 0xffffffff;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_IRQSTATUSSET0;
- mask = 0xffffffff;
- break;
-#endif
- default:
- WARN_ON(1);
- return 0;
- }
-
- l = __raw_readl(reg);
- if (inv)
- l = ~l;
- l &= mask;
- return l;
-}
-
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
-{
- void __iomem *reg = bank->base;
- u32 l;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
- l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_MASK;
- l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
- l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (enable)
- reg += OMAP1610_GPIO_SET_IRQENABLE1;
- else
- reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
- l = gpio_mask;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_MASK;
- l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
- l |= gpio_mask;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- if (enable)
- reg += OMAP24XX_GPIO_SETIRQENABLE1;
- else
- reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
- l = gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- if (enable)
- reg += OMAP4_GPIO_IRQSTATUSSET0;
- else
- reg += OMAP4_GPIO_IRQSTATUSCLR0;
- l = gpio_mask;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
- __raw_writel(l, reg);
-}
-
-static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
-{
- _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
-}
-
-/*
- * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
- * 1510 does not seem to have a wake-up register. If JTAG is connected
- * to the target, system will wake up always on GPIO events. While
- * system is running all registered GPIO interrupts need to have wake-up
- * enabled. When system is suspended, only selected GPIO interrupts need
- * to have wake-up enabled.
- */
-static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
-{
- unsigned long uninitialized_var(flags);
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_MPUIO:
- case METHOD_GPIO_1610:
- spin_lock_irqsave(&bank->lock, flags);
- if (enable)
- bank->suspend_wakeup |= (1 << gpio);
- else
- bank->suspend_wakeup &= ~(1 << gpio);
- spin_unlock_irqrestore(&bank->lock, flags);
- return 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
- if (bank->non_wakeup_gpios & (1 << gpio)) {
- printk(KERN_ERR "Unable to modify wakeup on "
- "non-wakeup GPIO%d\n",
- (bank - gpio_bank) * 32 + gpio);
- return -EINVAL;
- }
- spin_lock_irqsave(&bank->lock, flags);
- if (enable)
- bank->suspend_wakeup |= (1 << gpio);
- else
- bank->suspend_wakeup &= ~(1 << gpio);
- spin_unlock_irqrestore(&bank->lock, flags);
- return 0;
-#endif
- default:
- printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
- bank->method);
- return -EINVAL;
- }
-}
-
-static void _reset_gpio(struct gpio_bank *bank, int gpio)
-{
- _set_gpio_direction(bank, get_gpio_index(gpio), 1);
- _set_gpio_irqenable(bank, gpio, 0);
- _clear_gpio_irqstatus(bank, gpio);
- _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
-}
-
-/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
-static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
-{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
- struct gpio_bank *bank;
- int retval;
-
- if (check_gpio(gpio) < 0)
- return -ENODEV;
- bank = irq_data_get_irq_chip_data(d);
- retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
-
- return retval;
-}
-
-static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
- unsigned long flags;
-
- spin_lock_irqsave(&bank->lock, flags);
-
- /* Set trigger to none. You need to enable the desired trigger with
- * request_irq() or set_irq_type().
- */
- _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
-
-#ifdef CONFIG_ARCH_OMAP15XX
- if (bank->method == METHOD_GPIO_1510) {
- void __iomem *reg;
-
- /* Claim the pin for MPU */
- reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
- __raw_writel(__raw_readl(reg) | (1 << offset), reg);
- }
-#endif
- if (!cpu_class_is_omap1()) {
- if (!bank->mod_usage) {
- void __iomem *reg = bank->base;
- u32 ctrl;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg += OMAP24XX_GPIO_CTRL;
- else if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_CTRL;
- ctrl = __raw_readl(reg);
- /* Module is enabled, clocks are not gated */
- ctrl &= 0xFFFFFFFE;
- __raw_writel(ctrl, reg);
- }
- bank->mod_usage |= 1 << offset;
- }
- spin_unlock_irqrestore(&bank->lock, flags);
-
- return 0;
-}
-
-static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
- unsigned long flags;
-
- spin_lock_irqsave(&bank->lock, flags);
-#ifdef CONFIG_ARCH_OMAP16XX
- if (bank->method == METHOD_GPIO_1610) {
- /* Disable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- __raw_writel(1 << offset, reg);
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (bank->method == METHOD_GPIO_24XX) {
- /* Disable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
- __raw_writel(1 << offset, reg);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- if (bank->method == METHOD_GPIO_44XX) {
- /* Disable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
- __raw_writel(1 << offset, reg);
- }
-#endif
- if (!cpu_class_is_omap1()) {
- bank->mod_usage &= ~(1 << offset);
- if (!bank->mod_usage) {
- void __iomem *reg = bank->base;
- u32 ctrl;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg += OMAP24XX_GPIO_CTRL;
- else if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_CTRL;
- ctrl = __raw_readl(reg);
- /* Module is disabled, clocks are gated */
- ctrl |= 1;
- __raw_writel(ctrl, reg);
- }
- }
- _reset_gpio(bank, bank->chip.base + offset);
- spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-/*
- * We need to unmask the GPIO bank interrupt as soon as possible to
- * avoid missing GPIO interrupts for other lines in the bank.
- * Then we need to mask-read-clear-unmask the triggered GPIO lines
- * in the bank to avoid missing nested interrupts for a GPIO line.
- * If we wait to unmask individual GPIO lines in the bank after the
- * line's interrupt handler has been run, we may miss some nested
- * interrupts.
- */
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- void __iomem *isr_reg = NULL;
- u32 isr;
- unsigned int gpio_irq, gpio_index;
- struct gpio_bank *bank;
- u32 retrigger = 0;
- int unmasked = 0;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- bank = irq_get_handler_data(irq);
-#ifdef CONFIG_ARCH_OMAP1
- if (bank->method == METHOD_MPUIO)
- isr_reg = bank->base +
- OMAP_MPUIO_GPIO_INT / bank->stride;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- if (bank->method == METHOD_GPIO_1510)
- isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (bank->method == METHOD_GPIO_1610)
- isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- if (bank->method == METHOD_GPIO_7XX)
- isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (bank->method == METHOD_GPIO_24XX)
- isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_44XX)
- isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
-#endif
-
- if (WARN_ON(!isr_reg))
- goto exit;
-
- while(1) {
- u32 isr_saved, level_mask = 0;
- u32 enabled;
-
- enabled = _get_gpio_irqbank_mask(bank);
- isr_saved = isr = __raw_readl(isr_reg) & enabled;
-
- if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
- isr &= 0x0000ffff;
-
- if (cpu_class_is_omap2()) {
- level_mask = bank->level_mask & enabled;
- }
-
- /* clear edge sensitive interrupts before handler(s) are
- called so that we don't miss any interrupt occurred while
- executing them */
- _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
- _clear_gpio_irqbank(bank, isr_saved & ~level_mask);
- _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
-
- /* if there is only edge sensitive GPIO pin interrupts
- configured, we could unmask GPIO bank interrupt immediately */
- if (!level_mask && !unmasked) {
- unmasked = 1;
- chained_irq_exit(chip, desc);
- }
-
- isr |= retrigger;
- retrigger = 0;
- if (!isr)
- break;
-
- gpio_irq = bank->virtual_irq_start;
- for (; isr != 0; isr >>= 1, gpio_irq++) {
- gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
-
- if (!(isr & 1))
- continue;
-
-#ifdef CONFIG_ARCH_OMAP1
- /*
- * Some chips can't respond to both rising and falling
- * at the same time. If this irq was requested with
- * both flags, we need to flip the ICR data for the IRQ
- * to respond to the IRQ for the opposite direction.
- * This will be indicated in the bank toggle_mask.
- */
- if (bank->toggle_mask & (1 << gpio_index))
- _toggle_gpio_edge_triggering(bank, gpio_index);
-#endif
-
- generic_handle_irq(gpio_irq);
- }
- }
- /* if bank has any level sensitive GPIO pin interrupt
- configured, we must unmask the bank interrupt only after
- handler(s) are executed in order to avoid spurious bank
- interrupt */
-exit:
- if (!unmasked)
- chained_irq_exit(chip, desc);
-}
-
-static void gpio_irq_shutdown(struct irq_data *d)
-{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _reset_gpio(bank, gpio);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _clear_gpio_irqstatus(bank, gpio);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _set_gpio_irqenable(bank, gpio, 0);
- _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int irq_mask = 1 << get_gpio_index(gpio);
- u32 trigger = irqd_get_trigger_type(d);
-
- if (trigger)
- _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
-
- /* For level-triggered GPIOs, the clearing must be done after
- * the HW source is cleared, thus after the handler has run */
- if (bank->level_mask & irq_mask) {
- _set_gpio_irqenable(bank, gpio, 0);
- _clear_gpio_irqstatus(bank, gpio);
- }
-
- _set_gpio_irqenable(bank, gpio, 1);
-}
-
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .irq_shutdown = gpio_irq_shutdown,
- .irq_ack = gpio_ack_irq,
- .irq_mask = gpio_mask_irq,
- .irq_unmask = gpio_unmask_irq,
- .irq_set_type = gpio_irq_type,
- .irq_set_wake = gpio_wake_enable,
-};
-
-/*---------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP1
-
-/* MPUIO uses the always-on 32k clock */
-
-static void mpuio_ack_irq(struct irq_data *d)
-{
- /* The ISR is reset automatically, so do nothing here. */
-}
-
-static void mpuio_mask_irq(struct irq_data *d)
-{
- unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _set_gpio_irqenable(bank, gpio, 0);
-}
-
-static void mpuio_unmask_irq(struct irq_data *d)
-{
- unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _set_gpio_irqenable(bank, gpio, 1);
-}
-
-static struct irq_chip mpuio_irq_chip = {
- .name = "MPUIO",
- .irq_ack = mpuio_ack_irq,
- .irq_mask = mpuio_mask_irq,
- .irq_unmask = mpuio_unmask_irq,
- .irq_set_type = gpio_irq_type,
-#ifdef CONFIG_ARCH_OMAP16XX
- /* REVISIT: assuming only 16xx supports MPUIO wake events */
- .irq_set_wake = gpio_wake_enable,
-#endif
-};
-
-
-#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
-
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-#include <linux/platform_device.h>
-
-static int omap_mpuio_suspend_noirq(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct gpio_bank *bank = platform_get_drvdata(pdev);
- void __iomem *mask_reg = bank->base +
- OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- unsigned long flags;
-
- spin_lock_irqsave(&bank->lock, flags);
- bank->saved_wakeup = __raw_readl(mask_reg);
- __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
- spin_unlock_irqrestore(&bank->lock, flags);
-
- return 0;
-}
-
-static int omap_mpuio_resume_noirq(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct gpio_bank *bank = platform_get_drvdata(pdev);
- void __iomem *mask_reg = bank->base +
- OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- unsigned long flags;
-
- spin_lock_irqsave(&bank->lock, flags);
- __raw_writel(bank->saved_wakeup, mask_reg);
- spin_unlock_irqrestore(&bank->lock, flags);
-
- return 0;
-}
-
-static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
- .suspend_noirq = omap_mpuio_suspend_noirq,
- .resume_noirq = omap_mpuio_resume_noirq,
-};
-
-/* use platform_driver for this. */
-static struct platform_driver omap_mpuio_driver = {
- .driver = {
- .name = "mpuio",
- .pm = &omap_mpuio_dev_pm_ops,
- },
-};
-
-static struct platform_device omap_mpuio_device = {
- .name = "mpuio",
- .id = -1,
- .dev = {
- .driver = &omap_mpuio_driver.driver,
- }
- /* could list the /proc/iomem resources */
-};
-
-static inline void mpuio_init(void)
-{
- struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
- platform_set_drvdata(&omap_mpuio_device, bank);
-
- if (platform_driver_register(&omap_mpuio_driver) == 0)
- (void) platform_device_register(&omap_mpuio_device);
-}
-
-#else
-static inline void mpuio_init(void) {}
-#endif /* 16xx */
-
-#else
-
-extern struct irq_chip mpuio_irq_chip;
-
-#define bank_is_mpuio(bank) 0
-static inline void mpuio_init(void) {}
-
-#endif
-
-/*---------------------------------------------------------------------*/
-
-/* REVISIT these are stupid implementations! replace by ones that
- * don't switch on METHOD_* and which mostly avoid spinlocks
- */
-
-static int gpio_input(struct gpio_chip *chip, unsigned offset)
-{
- struct gpio_bank *bank;
- unsigned long flags;
-
- bank = container_of(chip, struct gpio_bank, chip);
- spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_direction(bank, offset, 1);
- spin_unlock_irqrestore(&bank->lock, flags);
- return 0;
-}
-
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
- void __iomem *reg = bank->base;
-
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL / bank->stride;
- break;
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_OE;
- break;
- default:
- WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
- return -EINVAL;
- }
- return __raw_readl(reg) & mask;
-}
-
-static int gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct gpio_bank *bank;
- void __iomem *reg;
- int gpio;
- u32 mask;
-
- gpio = chip->base + offset;
- bank = get_gpio_bank(gpio);
- reg = bank->base;
- mask = 1 << get_gpio_index(gpio);
-
- if (gpio_is_input(bank, mask))
- return _get_gpio_datain(bank, gpio);
- else
- return _get_gpio_dataout(bank, gpio);
-}
-
-static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct gpio_bank *bank;
- unsigned long flags;
-
- bank = container_of(chip, struct gpio_bank, chip);
- spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_dataout(bank, offset, value);
- _set_gpio_direction(bank, offset, 0);
- spin_unlock_irqrestore(&bank->lock, flags);
- return 0;
-}
-
-static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
- unsigned debounce)
-{
- struct gpio_bank *bank;
- unsigned long flags;
-
- bank = container_of(chip, struct gpio_bank, chip);
-
- if (!bank->dbck) {
- bank->dbck = clk_get(bank->dev, "dbclk");
- if (IS_ERR(bank->dbck))
- dev_err(bank->dev, "Could not get gpio dbck\n");
- }
-
- spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_debounce(bank, offset, debounce);
- spin_unlock_irqrestore(&bank->lock, flags);
-
- return 0;
-}
-
-static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct gpio_bank *bank;
- unsigned long flags;
-
- bank = container_of(chip, struct gpio_bank, chip);
- spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_dataout(bank, offset, value);
- spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
-{
- struct gpio_bank *bank;
-
- bank = container_of(chip, struct gpio_bank, chip);
- return bank->virtual_irq_start + offset;
-}
-
-/*---------------------------------------------------------------------*/
-
-static void __init omap_gpio_show_rev(struct gpio_bank *bank)
-{
- u32 rev;
-
- if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
- rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
- else if (cpu_is_omap24xx() || cpu_is_omap34xx())
- rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
- else if (cpu_is_omap44xx())
- rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
- else
- return;
-
- printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
- (rev >> 4) & 0x0f, rev & 0x0f);
-}
-
-/* This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-static inline int init_gpio_info(struct platform_device *pdev)
-{
- /* TODO: Analyze removing gpio_bank_count usage from driver code */
- gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
- GFP_KERNEL);
- if (!gpio_bank) {
- dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
- return -ENOMEM;
- }
- return 0;
-}
-
-/* TODO: Cleanup cpu_is_* checks */
-static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
-{
- if (cpu_class_is_omap2()) {
- if (cpu_is_omap44xx()) {
- __raw_writel(0xffffffff, bank->base +
- OMAP4_GPIO_IRQSTATUSCLR0);
- __raw_writel(0x00000000, bank->base +
- OMAP4_GPIO_DEBOUNCENABLE);
- /* Initialize interface clk ungated, module enabled */
- __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
- } else if (cpu_is_omap34xx()) {
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(0xffffffff, bank->base +
- OMAP24XX_GPIO_IRQSTATUS1);
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_DEBOUNCE_EN);
-
- /* Initialize interface clk ungated, module enabled */
- __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
- } else if (cpu_is_omap24xx()) {
- static const u32 non_wakeup_gpios[] = {
- 0xe203ffc0, 0x08700040
- };
- if (id < ARRAY_SIZE(non_wakeup_gpios))
- bank->non_wakeup_gpios = non_wakeup_gpios[id];
- }
- } else if (cpu_class_is_omap1()) {
- if (bank_is_mpuio(bank))
- __raw_writew(0xffff, bank->base +
- OMAP_MPUIO_GPIO_MASKIT / bank->stride);
- if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
- __raw_writew(0xffff, bank->base
- + OMAP1510_GPIO_INT_MASK);
- __raw_writew(0x0000, bank->base
- + OMAP1510_GPIO_INT_STATUS);
- }
- if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
- __raw_writew(0x0000, bank->base
- + OMAP1610_GPIO_IRQENABLE1);
- __raw_writew(0xffff, bank->base
- + OMAP1610_GPIO_IRQSTATUS1);
- __raw_writew(0x0014, bank->base
- + OMAP1610_GPIO_SYSCONFIG);
-
- /*
- * Enable system clock for GPIO module.
- * The CAM_CLK_CTRL *is* really the right place.
- */
- omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
- ULPD_CAM_CLK_CTRL);
- }
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
- __raw_writel(0xffffffff, bank->base
- + OMAP7XX_GPIO_INT_MASK);
- __raw_writel(0x00000000, bank->base
- + OMAP7XX_GPIO_INT_STATUS);
- }
- }
-}
-
-static void __init omap_gpio_chip_init(struct gpio_bank *bank)
-{
- int j;
- static int gpio;
-
- bank->mod_usage = 0;
- /*
- * REVISIT eventually switch from OMAP-specific gpio structs
- * over to the generic ones
- */
- bank->chip.request = omap_gpio_request;
- bank->chip.free = omap_gpio_free;
- bank->chip.direction_input = gpio_input;
- bank->chip.get = gpio_get;
- bank->chip.direction_output = gpio_output;
- bank->chip.set_debounce = gpio_debounce;
- bank->chip.set = gpio_set;
- bank->chip.to_irq = gpio_2irq;
- if (bank_is_mpuio(bank)) {
- bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP16XX
- bank->chip.dev = &omap_mpuio_device.dev;
-#endif
- bank->chip.base = OMAP_MPUIO(0);
- } else {
- bank->chip.label = "gpio";
- bank->chip.base = gpio;
- gpio += bank_width;
- }
- bank->chip.ngpio = bank_width;
-
- gpiochip_add(&bank->chip);
-
- for (j = bank->virtual_irq_start;
- j < bank->virtual_irq_start + bank_width; j++) {
- irq_set_lockdep_class(j, &gpio_lock_class);
- irq_set_chip_data(j, bank);
- if (bank_is_mpuio(bank))
- irq_set_chip(j, &mpuio_irq_chip);
- else
- irq_set_chip(j, &gpio_irq_chip);
- irq_set_handler(j, handle_simple_irq);
- set_irq_flags(j, IRQF_VALID);
- }
- irq_set_chained_handler(bank->irq, gpio_irq_handler);
- irq_set_handler_data(bank->irq, bank);
-}
-
-static int __devinit omap_gpio_probe(struct platform_device *pdev)
-{
- static int gpio_init_done;
- struct omap_gpio_platform_data *pdata;
- struct resource *res;
- int id;
- struct gpio_bank *bank;
-
- if (!pdev->dev.platform_data)
- return -EINVAL;
-
- pdata = pdev->dev.platform_data;
-
- if (!gpio_init_done) {
- int ret;
-
- ret = init_gpio_info(pdev);
- if (ret)
- return ret;
- }
-
- id = pdev->id;
- bank = &gpio_bank[id];
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (unlikely(!res)) {
- dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
- return -ENODEV;
- }
-
- bank->irq = res->start;
- bank->virtual_irq_start = pdata->virtual_irq_start;
- bank->method = pdata->bank_type;
- bank->dev = &pdev->dev;
- bank->dbck_flag = pdata->dbck_flag;
- bank->stride = pdata->bank_stride;
- bank_width = pdata->bank_width;
-
- spin_lock_init(&bank->lock);
-
- /* Static mapping, never released */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(!res)) {
- dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
- return -ENODEV;
- }
-
- bank->base = ioremap(res->start, resource_size(res));
- if (!bank->base) {
- dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
- return -ENOMEM;
- }
-
- pm_runtime_enable(bank->dev);
- pm_runtime_get_sync(bank->dev);
-
- omap_gpio_mod_init(bank, id);
- omap_gpio_chip_init(bank);
- omap_gpio_show_rev(bank);
-
- if (!gpio_init_done)
- gpio_init_done = 1;
-
- return 0;
-}
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(void)
-{
- int i;
-
- if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
- return 0;
-
- for (i = 0; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- void __iomem *wake_status;
- void __iomem *wake_clear;
- void __iomem *wake_set;
- unsigned long flags;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
- wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
- wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
- wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
- wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
- wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
- break;
-#endif
- default:
- continue;
- }
-
- spin_lock_irqsave(&bank->lock, flags);
- bank->saved_wakeup = __raw_readl(wake_status);
- __raw_writel(0xffffffff, wake_clear);
- __raw_writel(bank->suspend_wakeup, wake_set);
- spin_unlock_irqrestore(&bank->lock, flags);
- }
-
- return 0;
-}
-
-static void omap_gpio_resume(void)
-{
- int i;
-
- if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
- return;
-
- for (i = 0; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- void __iomem *wake_clear;
- void __iomem *wake_set;
- unsigned long flags;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
- wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
- wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
- break;
-#endif
- default:
- continue;
- }
-
- spin_lock_irqsave(&bank->lock, flags);
- __raw_writel(0xffffffff, wake_clear);
- __raw_writel(bank->saved_wakeup, wake_set);
- spin_unlock_irqrestore(&bank->lock, flags);
- }
-}
-
-static struct syscore_ops omap_gpio_syscore_ops = {
- .suspend = omap_gpio_suspend,
- .resume = omap_gpio_resume,
-};
-
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-static int workaround_enabled;
-
-void omap2_gpio_prepare_for_idle(int off_mode)
-{
- int i, c = 0;
- int min = 0;
-
- if (cpu_is_omap34xx())
- min = 1;
-
- for (i = min; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- u32 l1 = 0, l2 = 0;
- int j;
-
- for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
- clk_disable(bank->dbck);
-
- if (!off_mode)
- continue;
-
- /* If going to OFF, remove triggering for all
- * non-wakeup GPIOs. Otherwise spurious IRQs will be
- * generated. See OMAP2420 Errata item 1.101. */
- if (!(bank->enabled_non_wakeup_gpios))
- continue;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP24XX_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
-
- if (cpu_is_omap44xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP4_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP4_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP4_GPIO_RISINGDETECT);
- }
-
- bank->saved_fallingdetect = l1;
- bank->saved_risingdetect = l2;
- l1 &= ~bank->enabled_non_wakeup_gpios;
- l2 &= ~bank->enabled_non_wakeup_gpios;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(l1, bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
-
- if (cpu_is_omap44xx()) {
- __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
- }
-
- c++;
- }
- if (!c) {
- workaround_enabled = 0;
- return;
- }
- workaround_enabled = 1;
-}
-
-void omap2_gpio_resume_after_idle(void)
-{
- int i;
- int min = 0;
-
- if (cpu_is_omap34xx())
- min = 1;
- for (i = min; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- u32 l = 0, gen, gen0, gen1;
- int j;
-
- for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
- clk_enable(bank->dbck);
-
- if (!workaround_enabled)
- continue;
-
- if (!(bank->enabled_non_wakeup_gpios))
- continue;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
- }
-
- if (cpu_is_omap44xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP4_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
- }
-
- /* Check if any of the non-wakeup interrupt GPIOs have changed
- * state. If so, generate an IRQ by software. This is
- * horribly racy, but it's the best we can do to work around
- * this silicon bug. */
- l ^= bank->saved_datain;
- l &= bank->enabled_non_wakeup_gpios;
-
- /*
- * No need to generate IRQs for the rising edge for gpio IRQs
- * configured with falling edge only; and vice versa.
- */
- gen0 = l & bank->saved_fallingdetect;
- gen0 &= bank->saved_datain;
-
- gen1 = l & bank->saved_risingdetect;
- gen1 &= ~(bank->saved_datain);
-
- /* FIXME: Consider GPIO IRQs with level detections properly! */
- gen = l & (~(bank->saved_fallingdetect) &
- ~(bank->saved_risingdetect));
- /* Consider all GPIO IRQs needed to be updated */
- gen |= gen0 | gen1;
-
- if (gen) {
- u32 old0, old1;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- old0 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- }
-
- if (cpu_is_omap44xx()) {
- old0 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- }
- }
- }
-
-}
-
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-/* save the registers of bank 2-6 */
-void omap_gpio_save_context(void)
-{
- int i;
-
- /* saving banks from 2-6 only since GPIO1 is in WKUP */
- for (i = 1; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- gpio_context[i].irqenable1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
- gpio_context[i].irqenable2 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
- gpio_context[i].wake_en =
- __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
- gpio_context[i].ctrl =
- __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- gpio_context[i].oe =
- __raw_readl(bank->base + OMAP24XX_GPIO_OE);
- gpio_context[i].leveldetect0 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- gpio_context[i].leveldetect1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- gpio_context[i].risingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
- gpio_context[i].fallingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- gpio_context[i].dataout =
- __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
- }
-}
-
-/* restore the required registers of bank 2-6 */
-void omap_gpio_restore_context(void)
-{
- int i;
-
- for (i = 1; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- __raw_writel(gpio_context[i].irqenable1,
- bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(gpio_context[i].irqenable2,
- bank->base + OMAP24XX_GPIO_IRQENABLE2);
- __raw_writel(gpio_context[i].wake_en,
- bank->base + OMAP24XX_GPIO_WAKE_EN);
- __raw_writel(gpio_context[i].ctrl,
- bank->base + OMAP24XX_GPIO_CTRL);
- __raw_writel(gpio_context[i].oe,
- bank->base + OMAP24XX_GPIO_OE);
- __raw_writel(gpio_context[i].leveldetect0,
- bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(gpio_context[i].leveldetect1,
- bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(gpio_context[i].risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- __raw_writel(gpio_context[i].fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(gpio_context[i].dataout,
- bank->base + OMAP24XX_GPIO_DATAOUT);
- }
-}
-#endif
-
-static struct platform_driver omap_gpio_driver = {
- .probe = omap_gpio_probe,
- .driver = {
- .name = "omap_gpio",
- },
-};
-
-/*
- * gpio driver register needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap_gpio_drv_reg() is a postcore_initcall.
- */
-static int __init omap_gpio_drv_reg(void)
-{
- return platform_driver_register(&omap_gpio_driver);
-}
-postcore_initcall(omap_gpio_drv_reg);
-
-static int __init omap_gpio_sysinit(void)
-{
- mpuio_init();
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (cpu_is_omap16xx() || cpu_class_is_omap2())
- register_syscore_ops(&omap_gpio_syscore_ops);
-#endif
-
- return 0;
-}
-
-arch_initcall(omap_gpio_sysinit);
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index cac2e8ac6968..ec97e00cb581 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -52,6 +52,109 @@
#define OMAP34XX_NR_GPIOS 6
+/*
+ * OMAP1510 GPIO registers
+ */
+#define OMAP1510_GPIO_DATA_INPUT 0x00
+#define OMAP1510_GPIO_DATA_OUTPUT 0x04
+#define OMAP1510_GPIO_DIR_CONTROL 0x08
+#define OMAP1510_GPIO_INT_CONTROL 0x0c
+#define OMAP1510_GPIO_INT_MASK 0x10
+#define OMAP1510_GPIO_INT_STATUS 0x14
+#define OMAP1510_GPIO_PIN_CONTROL 0x18
+
+#define OMAP1510_IH_GPIO_BASE 64
+
+/*
+ * OMAP1610 specific GPIO registers
+ */
+#define OMAP1610_GPIO_REVISION 0x0000
+#define OMAP1610_GPIO_SYSCONFIG 0x0010
+#define OMAP1610_GPIO_SYSSTATUS 0x0014
+#define OMAP1610_GPIO_IRQSTATUS1 0x0018
+#define OMAP1610_GPIO_IRQENABLE1 0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
+#define OMAP1610_GPIO_DATAIN 0x002c
+#define OMAP1610_GPIO_DATAOUT 0x0030
+#define OMAP1610_GPIO_DIRECTION 0x0034
+#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
+#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
+#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
+#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
+#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
+#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
+
+/*
+ * OMAP7XX specific GPIO registers
+ */
+#define OMAP7XX_GPIO_DATA_INPUT 0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
+#define OMAP7XX_GPIO_DIR_CONTROL 0x08
+#define OMAP7XX_GPIO_INT_CONTROL 0x0c
+#define OMAP7XX_GPIO_INT_MASK 0x10
+#define OMAP7XX_GPIO_INT_STATUS 0x14
+
+/*
+ * omap2+ specific GPIO registers
+ */
+#define OMAP24XX_GPIO_REVISION 0x0000
+#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
+#define OMAP24XX_GPIO_IRQENABLE2 0x002c
+#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
+#define OMAP24XX_GPIO_CTRL 0x0030
+#define OMAP24XX_GPIO_OE 0x0034
+#define OMAP24XX_GPIO_DATAIN 0x0038
+#define OMAP24XX_GPIO_DATAOUT 0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
+#define OMAP24XX_GPIO_RISINGDETECT 0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
+#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
+#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
+#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
+#define OMAP24XX_GPIO_SETWKUENA 0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
+#define OMAP24XX_GPIO_SETDATAOUT 0x0094
+
+#define OMAP4_GPIO_REVISION 0x0000
+#define OMAP4_GPIO_EOI 0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
+#define OMAP4_GPIO_IRQSTATUS0 0x002c
+#define OMAP4_GPIO_IRQSTATUS1 0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
+#define OMAP4_GPIO_IRQWAKEN0 0x0044
+#define OMAP4_GPIO_IRQWAKEN1 0x0048
+#define OMAP4_GPIO_IRQENABLE1 0x011c
+#define OMAP4_GPIO_WAKE_EN 0x0120
+#define OMAP4_GPIO_IRQSTATUS2 0x0128
+#define OMAP4_GPIO_IRQENABLE2 0x012c
+#define OMAP4_GPIO_CTRL 0x0130
+#define OMAP4_GPIO_OE 0x0134
+#define OMAP4_GPIO_DATAIN 0x0138
+#define OMAP4_GPIO_DATAOUT 0x013c
+#define OMAP4_GPIO_LEVELDETECT0 0x0140
+#define OMAP4_GPIO_LEVELDETECT1 0x0144
+#define OMAP4_GPIO_RISINGDETECT 0x0148
+#define OMAP4_GPIO_FALLINGDETECT 0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
+#define OMAP4_GPIO_CLEARWKUENA 0x0180
+#define OMAP4_GPIO_SETWKUENA 0x0184
+#define OMAP4_GPIO_CLEARDATAOUT 0x0190
+#define OMAP4_GPIO_SETDATAOUT 0x0194
+
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index e9de58a2e294..53eb15b0a07d 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -19,7 +19,6 @@ obj-y += gpio.o
obj-y += gpio-config.o
obj-y += dev-asocdma.o
-obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
deleted file mode 100644
index ea37c0461788..000000000000
--- a/arch/arm/plat-samsung/gpiolib.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/* arch/arm/plat-samsung/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, base + GPIOCON_OFF);
-
- gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
- unsigned long dat;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, base + GPIOCON_OFF);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
-
- if (offset > 7)
- offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
- unsigned con_offset = offset;
-
- if (con_offset > 7)
- con_offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(con_offset));
- con |= 0x1 << con_4bit_shift(con_offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, regcon);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = samsung_gpiolib_4bit_input;
- chip->chip.direction_output = samsung_gpiolib_4bit_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = samsung_gpiolib_4bit2_input;
- chip->chip.direction_output = samsung_gpiolib_4bit2_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- samsung_gpiolib_add_4bit(chip);
- s3c_gpiolib_add(chip);
- }
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- samsung_gpiolib_add_4bit2(chip);
- s3c_gpiolib_add(chip);
- }
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++)
- s3c_gpiolib_add(chip);
-}