diff options
Diffstat (limited to 'arch')
1388 files changed, 19717 insertions, 15772 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 60cde53d266c..8bb936226dee 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE def_bool y config GENERIC_GPIO - def_bool y + bool config ZONE_DMA bool diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 1b71ca70c9f6..6d9e805f18a7 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -51,8 +51,6 @@ #define F_EXLCK 16 /* or 3 */ #define F_SHLCK 32 /* or 4 */ -#define F_INPROGRESS 64 - #include <asm-generic/fcntl.h> #endif diff --git a/arch/alpha/include/asm/sysinfo.h b/arch/alpha/include/asm/sysinfo.h index 086aba284df2..e77d77cd07b8 100644 --- a/arch/alpha/include/asm/sysinfo.h +++ b/arch/alpha/include/asm/sysinfo.h @@ -27,13 +27,4 @@ #define UAC_NOFIX 2 #define UAC_SIGBUS 4 - -#ifdef __KERNEL__ - -/* This is the shift that is applied to the UAC bits as stored in the - per-thread flags. See thread_info.h. */ -#define UAC_SHIFT 6 - -#endif - #endif /* __ASM_ALPHA_SYSINFO_H */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 6f32f9c84a2d..ff73db022342 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -74,9 +74,9 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */ #define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */ -#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */ -#define TIF_UAC_NOFIX 11 -#define TIF_UAC_SIGBUS 12 +#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */ +#define TIF_UAC_NOFIX 11 /* ! flags as they match */ +#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */ #define TIF_MEMDIE 13 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ #define TIF_FREEZE 16 /* is freezing for suspend */ @@ -97,7 +97,7 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \ | _TIF_SYSCALL_TRACE) -#define ALPHA_UAC_SHIFT 10 +#define ALPHA_UAC_SHIFT TIF_UAC_NOPRINT #define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \ 1 << TIF_UAC_SIGBUS) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 326f0a2d56e5..01e8715e26d9 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -42,6 +42,7 @@ #include <asm/uaccess.h> #include <asm/system.h> #include <asm/sysinfo.h> +#include <asm/thread_info.h> #include <asm/hwrpb.h> #include <asm/processor.h> @@ -633,9 +634,10 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, case GSI_UACPROC: if (nbytes < sizeof(unsigned int)) return -EINVAL; - w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK; - if (put_user(w, (unsigned int __user *)buffer)) - return -EFAULT; + w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) & + UAC_BITMASK; + if (put_user(w, (unsigned int __user *)buffer)) + return -EFAULT; return 1; case GSI_PROC_TYPE: @@ -756,8 +758,8 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer, case SSIN_UACPROC: again: old = current_thread_info()->flags; - new = old & ~(UAC_BITMASK << UAC_SHIFT); - new = new | (w & UAC_BITMASK) << UAC_SHIFT; + new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT); + new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT; if (cmpxchg(¤t_thread_info()->flags, old, new) != old) goto again; diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c index f0df3fbd8402..b9fc6c309d2e 100644 --- a/arch/alpha/kernel/srm_env.c +++ b/arch/alpha/kernel/srm_env.c @@ -4,9 +4,8 @@ * * (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de> * - * This driver is at all a modified version of Erik Mouw's - * Documentation/DocBook/procfs_example.c, so: thank - * you, Erik! He can be reached via email at + * This driver is a modified version of Erik Mouw's example proc + * interface, so: thank you, Erik! He can be reached via email at * <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea * provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They * included a patch like this as well. Thanks for idea! diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index b9c28f3f1956..6acea1f96de3 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -360,7 +360,7 @@ sys_call_table: .quad sys_newuname .quad sys_nanosleep /* 340 */ .quad sys_mremap - .quad sys_nfsservctl + .quad sys_ni_syscall /* old nfsservctl */ .quad sys_setresuid .quad sys_getresuid .quad sys_pciconfig_read /* 345 */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5ebc5d922ea1..5ca86e7ab66d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,7 +3,7 @@ config ARM default y select HAVE_AOUT select HAVE_DMA_API_DEBUG - select HAVE_IDE + select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -29,6 +29,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ select GENERIC_IRQ_SHOW + select CPU_PM if (SUSPEND || CPU_IDLE) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -195,7 +196,8 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime" + bool "Patch physical to virtual translations at runtime" if EMBEDDED + default y depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -204,16 +206,29 @@ config ARM_PATCH_PHYS_VIRT kernel in system memory. This can only be used with non-XIP MMU kernels where the base - of physical memory is at a 16MB boundary, or theoretically 64K - for the MSM machine class. + of physical memory is at a 16MB boundary. -config ARM_PATCH_PHYS_VIRT_16BIT - def_bool y - depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. + +config NEED_MACH_MEMORY_H + bool + help + Select this when mach/memory.h is required to provide special + definitions for this platform. The need for mach/memory.h should + be avoided when possible. + +config PHYS_OFFSET + hex "Physical address of main memory" + depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H help - This option extends the physical to virtual translation patching - to allow physical memory down to a theoretical minimum of 64K - boundaries. + Please provide the physical address corresponding to the + location of main memory in your system. + +config GENERIC_BUG + def_bool y + depends on BUG source "init/Kconfig" @@ -246,6 +261,7 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_MEMORY_H help Support for ARM's Integrator platform. @@ -261,6 +277,7 @@ config ARCH_REALVIEW select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB + select NEED_MACH_MEMORY_H help This enables support for ARM Ltd RealView boards. @@ -301,7 +318,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP - select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -322,6 +338,7 @@ config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Cirrus Logic 711x/721x based boards. @@ -346,7 +363,6 @@ config ARCH_GEMINI config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" select CPU_V7 - select GENERIC_TIME select NO_IOPORT select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP @@ -362,6 +378,7 @@ config ARCH_EBSA110 select ISA select NO_IOPORT select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -377,6 +394,7 @@ config ARCH_EP93XX select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_USES_GETTIMEOFFSET + select NEED_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -385,6 +403,8 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select HAVE_IDE + select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -434,6 +454,7 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G + select NEED_MACH_MEMORY_H help Support for Intel's IOP13XX (XScale) family of processors. @@ -464,6 +485,7 @@ config ARCH_IXP23XX select CPU_XSC3 select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP23xx (XScale) family of processors. @@ -473,6 +495,7 @@ config ARCH_IXP2000 select CPU_XSCALE select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -519,7 +542,6 @@ config ARCH_LPC32XX select ARM_AMBA select USB_ARCH_HAS_OHCI select CLKDEV_LOOKUP - select GENERIC_TIME select GENERIC_CLOCKEVENTS help Support for the NXP LPC32XX family of processors @@ -566,6 +588,7 @@ config ARCH_KS8695 select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -598,7 +621,6 @@ config ARCH_TEGRA bool "NVIDIA Tegra" select CLKDEV_LOOKUP select CLKSRC_MMIO - select GENERIC_TIME select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK @@ -631,6 +653,8 @@ config ARCH_PXA select SPARSE_IRQ select AUTO_ZRELADDR select MULTI_IRQ_HANDLER + select ARM_CPU_SUSPEND if PM + select HAVE_IDE help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -657,6 +681,7 @@ config ARCH_SHMOBILE select SPARSE_IRQ select MULTI_IRQ_HANDLER select PM_GENERIC_DOMAINS if PM + select NEED_MACH_MEMORY_H help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. @@ -671,6 +696,8 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select HAVE_IDE + select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -689,6 +716,8 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE + select NEED_MACH_MEMORY_H help Support for StrongARM 11x0 based boards. @@ -722,7 +751,6 @@ config ARCH_S3C64XX select ARCH_REQUIRE_GPIOLIB select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER - select SAMSUNG_IRQ_UART select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX @@ -781,6 +809,7 @@ config ARCH_S5PV210 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems @@ -797,6 +826,7 @@ config ARCH_EXYNOS4 select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung EXYNOS4 series based systems @@ -808,6 +838,7 @@ config ARCH_SHARK select ZONE_DMA select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -835,6 +866,8 @@ config ARCH_U300 select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select NEED_MACH_MEMORY_H help Support for ST-Ericsson U300 series mobile platforms. @@ -910,7 +943,6 @@ config ARCH_VT8500 config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" select CPU_V7 - select GENERIC_TIME select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select ARM_GIC @@ -1271,6 +1303,32 @@ config ARM_ERRATA_754327 This workaround defines cpu_relax() as smp_mb(), preventing correctly written polling loops from denying visibility of updates to memory. +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 && !SMP + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" @@ -1349,6 +1407,7 @@ config SMP MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE + depends on MMU select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP help @@ -1362,7 +1421,7 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also <file:Documentation/i386/IO-APIC.txt>, + See also <file:Documentation/x86/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://tldp.org/HOWTO/SMP-HOWTO.html>. @@ -1381,6 +1440,31 @@ config SMP_ON_UP If you don't know what to do here, say Y. +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config HAVE_ARM_SCU bool help @@ -1456,6 +1540,7 @@ config THUMB2_KERNEL depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED + select ARM_UNWIND help By enabling this option, the kernel will be compiled in Thumb-2 mode. A compiler/assembler that understand the unified @@ -1781,6 +1866,38 @@ config ZBOOT_ROM_SH_MOBILE_SDHI endchoice +config ARM_APPENDED_DTB + bool "Use appended device tree blob to zImage (EXPERIMENTAL)" + depends on OF && !ZBOOT_ROM && EXPERIMENTAL + help + With this option, the boot code will look for a device tree binary + (DTB) appended to zImage + (e.g. cat zImage <filename>.dtb > zImage_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to zImage. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. Proper passing of the + location into r2 of a bootloader provided DTB is always preferable + to this option. + +config ARM_ATAG_DTB_COMPAT + bool "Supplement the appended DTB with traditional ATAG information" + depends on ARM_APPENDED_DTB + help + Some old bootloaders can't be updated to a DTB capable one, yet + they provide ATAGs with memory configuration, the ramdisk address, + the kernel cmdline string, etc. Such information is dynamically + provided by the bootloader and can't always be stored in a static + DTB. To allow a device tree enabled kernel to be used with such + bootloaders, this option allows zImage to extract the information + from the ATAG list and store it at run time into the appended DTB. + config CMDLINE string "Default kernel command string" default "" @@ -2075,6 +2192,9 @@ config ARCH_SUSPEND_POSSIBLE CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y +config ARM_CPU_SUSPEND + def_bool PM_SLEEP + endmenu source "net/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 81cbe40c159c..f283938c2fc7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,71 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,43 +138,14 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" - select ARM_AMBA + depends on ARM_AMBA help Enables the on-chip embedded trace macrocell and embedded trace buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X - help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int "S3C UART to use for low-level debug" @@ -129,4 +158,10 @@ config DEBUG_S3C_UART The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. +config ARM_KPROBES_TEST + tristate "Kprobes test module" + depends on KPROBES && MODULES + help + Perform tests of kprobes API and instruction set simulation. + endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 70c424eaf7b0..5665c2a3b652 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a1edfd5a129a..176062ac7f07 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -78,7 +78,16 @@ endif $(obj)/uImage: STARTADDR=$(LOADADDR) +check_for_multiple_loadaddr = \ +if [ $(words $(LOADADDR)) -gt 1 ]; then \ + echo 'multiple load addresses: $(LOADADDR)'; \ + echo 'This is incompatible with uImages'; \ + echo 'Specify LOADADDR on the commandline to build an uImage'; \ + false; \ +fi + $(obj)/uImage: $(obj)/zImage FORCE + @$(check_for_multiple_loadaddr) $(call if_changed,uimage) @echo ' Image $@ is ready' diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index c6028967d336..e0936a148516 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -5,3 +5,12 @@ piggy.lzo piggy.lzma vmlinux vmlinux.lds + +# borrowed libfdt files +fdt.c +fdt.h +fdt_ro.c +fdt_rw.c +fdt_wip.c +libfdt.h +libfdt_internal.h diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0c74a6fab952..21f56ff32797 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -26,6 +26,10 @@ HEAD = head.o OBJS += misc.o decompress.o FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c +# string library code (-Os is enforced to keep it much smaller) +OBJS += string.o +CFLAGS_string.o := -Os + # # Architecture dependencies # @@ -89,21 +93,41 @@ suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo suffix_$(CONFIG_KERNEL_LZMA) = lzma +# Borrowed libfdt files for the ATAG compatibility mode + +libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c +libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h + +libfdt_objs := $(addsuffix .o, $(basename $(libfdt))) + +$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,shipped) + +$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \ + $(addprefix $(obj)/,$(libfdt_hdrs)) + +ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) +OBJS += $(libfdt_objs) atags_to_fdt.o +endif + targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ - font.o font.c head.o misc.o $(OBJS) + lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS) # Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S +extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -ccflags-y := -fpic -fno-builtin +ccflags-y := -fpic -fno-builtin -I$(obj) asflags-y := -Wa,-march=all +# Supply kernel BSS size to the decompressor via a linker symbol. +KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}') +LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR) @@ -123,7 +147,7 @@ LDFLAGS_vmlinux += -T # For __aeabi_uidivmod lib1funcs = $(obj)/lib1funcs.o -$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE +$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S $(call cmd,shipped) # We need to prevent any GOTOFF relocs being used with references @@ -139,8 +163,16 @@ bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ ( echo "following symbols must have non local/private scope:" >&2; \ echo "$$bad_syms" >&2; rm -f $@; false ) +check_for_multiple_zreladdr = \ +if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ + echo 'multiple zreladdrs: $(ZRELADDR)'; \ + echo 'This needs CONFIG_AUTO_ZRELADDR to be set'; \ + false; \ +fi + $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE + @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c new file mode 100644 index 000000000000..6ce11c481178 --- /dev/null +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -0,0 +1,97 @@ +#include <asm/setup.h> +#include <libfdt.h> + +static int node_offset(void *fdt, const char *node_path) +{ + int offset = fdt_path_offset(fdt, node_path); + if (offset == -FDT_ERR_NOTFOUND) + offset = fdt_add_subnode(fdt, 0, node_path); + return offset; +} + +static int setprop(void *fdt, const char *node_path, const char *property, + uint32_t *val_array, int size) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop(fdt, offset, property, val_array, size); +} + +static int setprop_string(void *fdt, const char *node_path, + const char *property, const char *string) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop_string(fdt, offset, property, string); +} + +static int setprop_cell(void *fdt, const char *node_path, + const char *property, uint32_t val) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop_cell(fdt, offset, property, val); +} + +/* + * Convert and fold provided ATAGs into the provided FDT. + * + * REturn values: + * = 0 -> pretend success + * = 1 -> bad ATAG (may retry with another possible ATAG pointer) + * < 0 -> error from libfdt + */ +int atags_to_fdt(void *atag_list, void *fdt, int total_space) +{ + struct tag *atag = atag_list; + uint32_t mem_reg_property[2 * NR_BANKS]; + int memcount = 0; + int ret; + + /* make sure we've got an aligned pointer */ + if ((u32)atag_list & 0x3) + return 1; + + /* if we get a DTB here we're done already */ + if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC)) + return 0; + + /* validate the ATAG */ + if (atag->hdr.tag != ATAG_CORE || + (atag->hdr.size != tag_size(tag_core) && + atag->hdr.size != 2)) + return 1; + + /* let's give it all the room it could need */ + ret = fdt_open_into(fdt, fdt, total_space); + if (ret < 0) + return ret; + + for_each_tag(atag, atag_list) { + if (atag->hdr.tag == ATAG_CMDLINE) { + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); + } else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); + mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); + } else if (atag->hdr.tag == ATAG_INITRD2) { + uint32_t initrd_start, initrd_size; + initrd_start = atag->u.initrd.start; + initrd_size = atag->u.initrd.size; + setprop_cell(fdt, "/chosen", "linux,initrd-start", + initrd_start); + setprop_cell(fdt, "/chosen", "linux,initrd-end", + initrd_start + initrd_size); + } + } + + if (memcount) + setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount); + + return fdt_pack(fdt); +} diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index e95a5989602a..c2effc917254 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -216,6 +216,104 @@ restart: adr r0, LC0 mov r10, r6 #endif + mov r5, #0 @ init dtb size to 0 +#ifdef CONFIG_ARM_APPENDED_DTB +/* + * r0 = delta + * r2 = BSS start + * r3 = BSS end + * r4 = final kernel address + * r5 = appended dtb size (still unknown) + * r6 = _edata + * r7 = architecture ID + * r8 = atags/device tree pointer + * r9 = size of decompressed image + * r10 = end of this image, including bss/stack/malloc space if non XIP + * r11 = GOT start + * r12 = GOT end + * sp = stack pointer + * + * if there are device trees (dtb) appended to zImage, advance r10 so that the + * dtb data will get relocated along with the kernel if necessary. + */ + + ldr lr, [r6, #0] +#ifndef __ARMEB__ + ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian +#else + ldr r1, =0xd00dfeed +#endif + cmp lr, r1 + bne dtb_check_done @ not found + +#ifdef CONFIG_ARM_ATAG_DTB_COMPAT + /* + * OK... Let's do some funky business here. + * If we do have a DTB appended to zImage, and we do have + * an ATAG list around, we want the later to be translated + * and folded into the former here. To be on the safe side, + * let's temporarily move the stack away into the malloc + * area. No GOT fixup has occurred yet, but none of the + * code we're about to call uses any global variable. + */ + add sp, sp, #0x10000 + stmfd sp!, {r0-r3, ip, lr} + mov r0, r8 + mov r1, r6 + sub r2, sp, r6 + bl atags_to_fdt + + /* + * If returned value is 1, there is no ATAG at the location + * pointed by r8. Try the typical 0x100 offset from start + * of RAM and hope for the best. + */ + cmp r0, #1 + sub r0, r4, #TEXT_OFFSET + add r0, r0, #0x100 + mov r1, r6 + sub r2, sp, r6 + blne atags_to_fdt + + ldmfd sp!, {r0-r3, ip, lr} + sub sp, sp, #0x10000 +#endif + + mov r8, r6 @ use the appended device tree + + /* + * Make sure that the DTB doesn't end up in the final + * kernel's .bss area. To do so, we adjust the decompressed + * kernel size to compensate if that .bss size is larger + * than the relocated code. + */ + ldr r5, =_kernel_bss_size + adr r1, wont_overwrite + sub r1, r6, r1 + subs r1, r5, r1 + addhi r9, r9, r1 + + /* Get the dtb's size */ + ldr r5, [r6, #4] +#ifndef __ARMEB__ + /* convert r5 (dtb size) to little endian */ + eor r1, r5, r5, ror #16 + bic r1, r1, #0x00ff0000 + mov r5, r5, ror #8 + eor r5, r5, r1, lsr #8 +#endif + + /* preserve 64-bit alignment */ + add r5, r5, #7 + bic r5, r5, #7 + + /* relocate some pointers past the appended dtb */ + add r6, r6, r5 + add r10, r10, r5 + add sp, sp, r5 +dtb_check_done: +#endif + /* * Check to see if we will overwrite ourselves. * r4 = final kernel address @@ -223,15 +321,14 @@ restart: adr r0, LC0 * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: * r4 - 16k page directory >= r10 -> OK - * r4 + image length <= current position (pc) -> OK + * r4 + image length <= address of wont_overwrite -> OK */ add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - ARM( cmp r10, pc ) - THUMB( mov lr, pc ) - THUMB( cmp r10, lr ) + adr r9, wont_overwrite + cmp r10, r9 bls wont_overwrite /* @@ -285,14 +382,16 @@ wont_overwrite: * r2 = BSS start * r3 = BSS end * r4 = kernel execution address + * r5 = appended dtb size (0 if not present) * r7 = architecture ID * r8 = atags pointer * r11 = GOT start * r12 = GOT end * sp = stack pointer */ - teq r0, #0 + orrs r1, r0, r5 beq not_relocated + add r11, r11, r0 add r12, r12, r0 @@ -307,12 +406,21 @@ wont_overwrite: /* * Relocate all entries in the GOT table. + * Bump bss entries to _edata + dtb size */ 1: ldr r1, [r11, #0] @ relocate entries in the GOT - add r1, r1, r0 @ table. This fixes up the - str r1, [r11], #4 @ C references. + add r1, r1, r0 @ This fixes up C references + cmp r1, r2 @ if entry >= bss_start && + cmphs r3, r1 @ bss_end > entry + addhi r1, r1, r5 @ entry += dtb size + str r1, [r11], #4 @ next entry cmp r11, r12 blo 1b + + /* bump our bss pointers too */ + add r2, r2, r5 + add r3, r3, r5 + #else /* diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h new file mode 100644 index 000000000000..1f4e71876b00 --- /dev/null +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -0,0 +1,15 @@ +#ifndef _ARM_LIBFDT_ENV_H +#define _ARM_LIBFDT_ENV_H + +#include <linux/types.h> +#include <linux/string.h> +#include <asm/byteorder.h> + +#define fdt16_to_cpu(x) be16_to_cpu(x) +#define cpu_to_fdt16(x) cpu_to_be16(x) +#define fdt32_to_cpu(x) be32_to_cpu(x) +#define cpu_to_fdt32(x) cpu_to_be32(x) +#define fdt64_to_cpu(x) be64_to_cpu(x) +#define cpu_to_fdt64(x) cpu_to_be64(x) + +#endif diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 832d37236c59..8e2a8fca5ed2 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -18,14 +18,9 @@ unsigned int __machine_arch_type; -#define _LINUX_STRING_H_ - #include <linux/compiler.h> /* for inline */ -#include <linux/types.h> /* for size_t */ -#include <linux/stddef.h> /* for NULL */ +#include <linux/types.h> #include <linux/linkage.h> -#include <asm/string.h> - static void putstr(const char *ptr); extern void error(char *x); @@ -101,41 +96,6 @@ static void putstr(const char *ptr) flush(); } - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i = 0; - unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src; - - for (i = __n >> 3; i > 0; i--) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1 << 2) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1 << 1) { - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1) - *d++ = *s++; - - return __dest; -} - /* * gzip declarations */ diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index b6f61d9a5a1b..672ae95db5c3 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c index d403a8b24d7f..d279294f2381 100644 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) goto err; /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c new file mode 100644 index 000000000000..36e53ef9200f --- /dev/null +++ b/arch/arm/boot/compressed/string.c @@ -0,0 +1,127 @@ +/* + * arch/arm/boot/compressed/string.c + * + * Small subset of simple string routines + */ + +#include <linux/string.h> + +void *memcpy(void *__dest, __const void *__src, size_t __n) +{ + int i = 0; + unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src; + + for (i = __n >> 3; i > 0; i--) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 2) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 1) { + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1) + *d++ = *s++; + + return __dest; +} + +void *memmove(void *__dest, __const void *__src, size_t count) +{ + unsigned char *d = __dest; + const unsigned char *s = __src; + + if (__dest == __src) + return __dest; + + if (__dest < __src) + return memcpy(__dest, __src, count); + + while (count--) + d[count] = s[count]; + return __dest; +} + +size_t strlen(const char *s) +{ + const char *sc = s; + + while (*sc != '\0') + sc++; + return sc - s; +} + +int memcmp(const void *cs, const void *ct, size_t count) +{ + const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; + int res = 0; + + while (su1 < end) { + res = *su1++ - *su2++; + if (res) + break; + } + return res; +} + +int strcmp(const char *cs, const char *ct) +{ + unsigned char c1, c2; + int res = 0; + + do { + c1 = *cs++; + c2 = *ct++; + res = c1 - c2; + if (res) + break; + } while (c1); + return res; +} + +void *memchr(const void *s, int c, size_t count) +{ + const unsigned char *p = s; + + while (count--) + if ((unsigned char)c == *p++) + return (void *)(p - 1); + return NULL; +} + +char *strchr(const char *s, int c) +{ + while (*s != (char)c) + if (*s++ == '\0') + return NULL; + return (char *)s; +} + +#undef memset + +void *memset(void *s, int c, size_t count) +{ + char *xs = s; + while (count--) + *xs++ = c; + return s; +} + +void __memzero(void *s, size_t count) +{ + memset(s, 0, count); +} diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 4e728834a1b9..4919f2ac8b89 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -51,6 +51,10 @@ SECTIONS _got_start = .; .got : { *(.got) } _got_end = .; + + /* ensure the zImage file size is always a multiple of 64 bits */ + /* (without a dummy byte, ld just ignores the empty section) */ + .pad : { BYTE(0); . = ALIGN(8); } _edata = .; . = BSS_START; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce33..e5818668d091 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae00748..64cedca6fc79 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3227ca952a12..a8fc6b237592 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -26,14 +26,18 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/smp.h> +#include <linux/cpu_pm.h> #include <linux/cpumask.h> #include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> +#include <linux/slab.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/hardware/gic.h> -static DEFINE_SPINLOCK(irq_controller_lock); +static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ void __iomem *gic_cpu_base_addr __read_mostly; @@ -82,30 +86,30 @@ static void gic_mask_irq(struct irq_data *d) { u32 mask = 1 << (d->irq % 32); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); if (gic_arch_extn.irq_mask) gic_arch_extn.irq_mask(d); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); } static void gic_unmask_irq(struct irq_data *d) { u32 mask = 1 << (d->irq % 32); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); if (gic_arch_extn.irq_unmask) gic_arch_extn.irq_unmask(d); writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); } static void gic_eoi_irq(struct irq_data *d) { if (gic_arch_extn.irq_eoi) { - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); gic_arch_extn.irq_eoi(d); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); } writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); @@ -129,7 +133,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) return -EINVAL; - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); if (gic_arch_extn.irq_set_type) gic_arch_extn.irq_set_type(d, type); @@ -154,7 +158,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) if (enabled) writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); return 0; } @@ -180,12 +184,12 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu + shift); + bit = 1 << (cpu_logical_map(cpu) + shift); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; writel_relaxed(val | bit, reg); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); return IRQ_SET_MASK_OK; } @@ -215,9 +219,9 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); gic_irq = (status & 0x3ff); if (gic_irq == 1023) @@ -259,9 +263,16 @@ static void __init gic_dist_init(struct gic_chip_data *gic, unsigned int irq_start) { unsigned int gic_irqs, irq_limit, i; + u32 cpumask; void __iomem *base = gic->dist_base; - u32 cpumask = 1 << smp_processor_id(); + u32 cpu = 0; + u32 nrppis = 0, ppi_base = 0; +#ifdef CONFIG_SMP + cpu = cpu_logical_map(smp_processor_id()); +#endif + + cpumask = 1 << cpu; cpumask |= cpumask << 8; cpumask |= cpumask << 16; @@ -276,6 +287,25 @@ static void __init gic_dist_init(struct gic_chip_data *gic, if (gic_irqs > 1020) gic_irqs = 1020; + gic->gic_irqs = gic_irqs; + + /* + * Nobody would be insane enough to use PPIs on a secondary + * GIC, right? + */ + if (gic == &gic_data[0]) { + nrppis = (32 - irq_start) & 31; + + /* The GIC only supports up to 16 PPIs. */ + if (nrppis > 16) + BUG(); + + ppi_base = gic->irq_offset + 32 - nrppis; + } + + pr_info("Configuring GIC with %d sources (%d PPIs)\n", + gic_irqs, (gic == &gic_data[0]) ? nrppis : 0); + /* * Set all global interrupts to be level triggered, active low. */ @@ -311,7 +341,17 @@ static void __init gic_dist_init(struct gic_chip_data *gic, /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < irq_limit; i++) { + for (i = 0; i < nrppis; i++) { + int ppi = i + ppi_base; + + irq_set_percpu_devid(ppi); + irq_set_chip_and_handler(ppi, &gic_chip, + handle_percpu_devid_irq); + irq_set_chip_data(ppi, gic); + set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN); + } + + for (i = irq_start + nrppis; i < irq_limit; i++) { irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq); irq_set_chip_data(i, gic); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); @@ -343,6 +383,189 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) writel_relaxed(1, base + GIC_CPU_CTRL); } +#ifdef CONFIG_CPU_PM +/* + * Saves the GIC distributor registers during suspend or idle. Must be called + * with interrupts disabled but before powering down the GIC. After calling + * this function, no interrupts will be delivered by the GIC, and another + * platform-specific wakeup source must be enabled. + */ +static void gic_dist_save(unsigned int gic_nr) +{ + unsigned int gic_irqs; + void __iomem *dist_base; + int i; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_irqs = gic_data[gic_nr].gic_irqs; + dist_base = gic_data[gic_nr].dist_base; + + if (!dist_base) + return; + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) + gic_data[gic_nr].saved_spi_conf[i] = + readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + gic_data[gic_nr].saved_spi_target[i] = + readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + gic_data[gic_nr].saved_spi_enable[i] = + readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); +} + +/* + * Restores the GIC distributor registers during resume or when coming out of + * idle. Must be called before enabling interrupts. If a level interrupt + * that occured while the GIC was suspended is still present, it will be + * handled normally, but any edge interrupts that occured will not be seen by + * the GIC and need to be handled by the platform-specific wakeup source. + */ +static void gic_dist_restore(unsigned int gic_nr) +{ + unsigned int gic_irqs; + unsigned int i; + void __iomem *dist_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_irqs = gic_data[gic_nr].gic_irqs; + dist_base = gic_data[gic_nr].dist_base; + + if (!dist_base) + return; + + writel_relaxed(0, dist_base + GIC_DIST_CTRL); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_conf[i], + dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + writel_relaxed(0xa0a0a0a0, + dist_base + GIC_DIST_PRI + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_target[i], + dist_base + GIC_DIST_TARGET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_enable[i], + dist_base + GIC_DIST_ENABLE_SET + i * 4); + + writel_relaxed(1, dist_base + GIC_DIST_CTRL); +} + +static void gic_cpu_save(unsigned int gic_nr) +{ + int i; + u32 *ptr; + void __iomem *dist_base; + void __iomem *cpu_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data[gic_nr].dist_base; + cpu_base = gic_data[gic_nr].cpu_base; + + if (!dist_base || !cpu_base) + return; + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); + for (i = 0; i < DIV_ROUND_UP(32, 16); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); + +} + +static void gic_cpu_restore(unsigned int gic_nr) +{ + int i; + u32 *ptr; + void __iomem *dist_base; + void __iomem *cpu_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data[gic_nr].dist_base; + cpu_base = gic_data[gic_nr].cpu_base; + + if (!dist_base || !cpu_base) + return; + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); + for (i = 0; i < DIV_ROUND_UP(32, 16); i++) + writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(32, 4); i++) + writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4); + + writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK); + writel_relaxed(1, cpu_base + GIC_CPU_CTRL); +} + +static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) +{ + int i; + + for (i = 0; i < MAX_GIC_NR; i++) { + switch (cmd) { + case CPU_PM_ENTER: + gic_cpu_save(i); + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + gic_cpu_restore(i); + break; + case CPU_CLUSTER_PM_ENTER: + gic_dist_save(i); + break; + case CPU_CLUSTER_PM_ENTER_FAILED: + case CPU_CLUSTER_PM_EXIT: + gic_dist_restore(i); + break; + } + } + + return NOTIFY_OK; +} + +static struct notifier_block gic_notifier_block = { + .notifier_call = gic_notifier, +}; + +static void __init gic_pm_init(struct gic_chip_data *gic) +{ + gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_enable); + + gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_conf); + + cpu_pm_register_notifier(&gic_notifier_block); +} +#else +static void __init gic_pm_init(struct gic_chip_data *gic) +{ +} +#endif + void __init gic_init(unsigned int gic_nr, unsigned int irq_start, void __iomem *dist_base, void __iomem *cpu_base) { @@ -358,8 +581,10 @@ void __init gic_init(unsigned int gic_nr, unsigned int irq_start, if (gic_nr == 0) gic_cpu_base_addr = cpu_base; + gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic, irq_start); gic_cpu_init(gic); + gic_pm_init(gic); } void __cpuinit gic_secondary_init(unsigned int gic_nr) @@ -369,20 +594,15 @@ void __cpuinit gic_secondary_init(unsigned int gic_nr) gic_cpu_init(&gic_data[gic_nr]); } -void __cpuinit gic_enable_ppi(unsigned int irq) -{ - unsigned long flags; - - local_irq_save(flags); - irq_set_status_flags(irq, IRQ_NOPROBE); - gic_unmask_irq(irq_get_irq_data(irq)); - local_irq_restore(flags); -} - #ifdef CONFIG_SMP void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(*mask); + int cpu; + unsigned long map = 0; + + /* Convert our logical CPU mask into a physical one. */ + for_each_cpu(cpu, mask) + map |= 1 << cpu_logical_map(cpu); /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 97912fa48782..7129cfbdacd6 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1546,7 +1546,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) /* Start the next */ case PL330_OP_START: - if (!_start(thrd)) + if (!_thrd_active(thrd) && !_start(thrd)) ret = -EIO; break; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 0569de6acfba..61691cdbdcf2 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -718,6 +718,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) goto err_free; } + ret = clk_prepare(sachip->clk); + if (ret) + goto err_clkput; + spin_lock_init(&sachip->lock); sachip->dev = me; @@ -733,7 +737,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sachip->base = ioremap(mem->start, PAGE_SIZE * 2); if (!sachip->base) { ret = -ENOMEM; - goto err_clkput; + goto err_clk_unprep; } /* @@ -809,6 +813,8 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) err_unmap: iounmap(sachip->base); + err_clk_unprep: + clk_unprepare(sachip->clk); err_clkput: clk_put(sachip->clk); err_free: @@ -835,6 +841,7 @@ static void __sa1111_remove(struct sa1111 *sachip) sa1111_writel(0, irqbase + SA1111_WAKEEN1); clk_disable(sachip->clk); + clk_unprepare(sachip->clk); if (sachip->irq != NO_IRQ) { irq_set_chained_handler(sachip->irq, NULL); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index a07b0e763a80..1cde34a080d7 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -12,11 +12,11 @@ */ #include <linux/device.h> +#include <linux/gpio.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <asm/gpio.h> #include <asm/hardware/scoop.h> /* PCMCIA to Scoop linkage diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 41df47875122..2393b5bc96fa 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -41,9 +41,17 @@ static long __init sp804_get_clock_rate(const char *name) return PTR_ERR(clk); } + err = clk_prepare(clk); + if (err) { + pr_err("sp804: %s clock failed to prepare: %d\n", name, err); + clk_put(clk); + return err; + } + err = clk_enable(clk); if (err) { pr_err("sp804: %s clock failed to enable: %d\n", name, err); + clk_unprepare(clk); clk_put(clk); return err; } @@ -52,6 +60,7 @@ static long __init sp804_get_clock_rate(const char *name) if (rate < 0) { pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate); clk_disable(clk); + clk_unprepare(clk); clk_put(clk); } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 7aa4262ada7a..01f18a421b17 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -259,7 +259,6 @@ static void __init vic_disable(void __iomem *base) writel(0, base + VIC_INT_SELECT); writel(0, base + VIC_INT_ENABLE); writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_IRQ_STATUS); writel(0, base + VIC_ITCR); writel(~0, base + VIC_INT_SOFT_CLEAR); } @@ -347,7 +346,8 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, /* Identify which VIC cell this one is, by reading the ID */ for (i = 0; i < 4; i++) { - u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); + void __iomem *addr; + addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); cellid |= (readl(addr) & 0xff) << (8 * i); } vendor = (cellid >> 12) & 0xff; diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 7196ade07e27..1103f62a1964 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -1,5 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_TINY_RCU=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -8,20 +9,29 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y +CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CPU_ARM720T=y CONFIG_CPU_ARM920T=y +CONFIG_CPU_ARM922T=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_ARM1020=y +CONFIG_CPU_ARM1022=y +CONFIG_CPU_ARM1026=y CONFIG_PCI=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M" +CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -32,7 +42,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y @@ -40,6 +49,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -56,6 +66,8 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL030=y CONFIG_EXT2_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y @@ -68,4 +80,3 @@ CONFIG_NFSD_V3=y CONFIG_PARTITION_ADVANCED=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 6550db3aa5c7..960abceb8e14 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,3 +1,20 @@ include include/asm-generic/Kbuild.asm header-y += hwcap.h + +generic-y += auxvec.h +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += ioctl.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += local.h +generic-y += local64.h +generic-y += percpu.h +generic-y += poll.h +generic-y += resource.h +generic-y += sections.h +generic-y += siginfo.h +generic-y += sizes.h diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h deleted file mode 100644 index c0536f6b29a7..000000000000 --- a/arch/arm/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMARM_AUXVEC_H -#define __ASMARM_AUXVEC_H - -#endif diff --git a/arch/arm/include/asm/bitsperlong.h b/arch/arm/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b2..000000000000 --- a/arch/arm/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/bitsperlong.h> diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index 4d88425a4169..9abe7a07d5ac 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -3,21 +3,58 @@ #ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -extern void __bug(const char *file, int line) __attribute__((noreturn)); - -/* give file/line information */ -#define BUG() __bug(__FILE__, __LINE__) +/* + * Use a suitable undefined instruction to use for ARM/Thumb2 bug handling. + * We need to be careful not to conflict with those used by other modules and + * the register_undef_hook() system. + */ +#ifdef CONFIG_THUMB2_KERNEL +#define BUG_INSTR_VALUE 0xde02 +#define BUG_INSTR_TYPE ".hword " #else +#define BUG_INSTR_VALUE 0xe7f001f2 +#define BUG_INSTR_TYPE ".word " +#endif -/* this just causes an oops */ -#define BUG() do { *(int *)0 = 0; } while (1) -#endif +#define BUG() _BUG(__FILE__, __LINE__, BUG_INSTR_VALUE) +#define _BUG(file, line, value) __BUG(file, line, value) + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +/* + * The extra indirection is to ensure that the __FILE__ string comes through + * OK. Many version of gcc do not support the asm %c parameter which would be + * preferable to this unpleasantness. We use mergeable string sections to + * avoid multiple copies of the string appearing in the kernel image. + */ + +#define __BUG(__file, __line, __value) \ +do { \ + BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \ + asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \ + ".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \ + "2:\t.asciz " #__file "\n" \ + ".popsection\n" \ + ".pushsection __bug_table,\"a\"\n" \ + "3:\t.word 1b, 2b\n" \ + "\t.hword " #__line ", 0\n" \ + ".popsection"); \ + unreachable(); \ +} while (0) + +#else /* not CONFIG_DEBUG_BUGVERBOSE */ + +#define __BUG(__file, __line, __value) \ +do { \ + asm volatile(BUG_INSTR_TYPE #__value); \ + unreachable(); \ +} while (0) +#endif /* CONFIG_DEBUG_BUGVERBOSE */ #define HAVE_ARCH_BUG -#endif +#endif /* CONFIG_BUG */ #include <asm-generic/bug.h> diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index c023db09fcc1..7ea78144ae22 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -7,6 +7,7 @@ #define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING) #define CACHEID_ASID_TAGGED (1 << 3) #define CACHEID_VIPT_I_ALIASING (1 << 4) +#define CACHEID_PIPT (1 << 5) extern unsigned int cacheid; @@ -16,6 +17,7 @@ extern unsigned int cacheid; #define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING) #define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED) #define icache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_I_ALIASING) +#define icache_is_pipt() cacheid_is(CACHEID_PIPT) /* * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture @@ -26,7 +28,8 @@ extern unsigned int cacheid; #if __LINUX_ARM_ARCH__ >= 7 #define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING |\ CACHEID_ASID_TAGGED |\ - CACHEID_VIPT_I_ALIASING) + CACHEID_VIPT_I_ALIASING |\ + CACHEID_PIPT) #elif __LINUX_ARM_ARCH__ >= 6 #define __CACHEID_ARCH_MIN (~CACHEID_VIVT) #else diff --git a/arch/arm/include/asm/cputime.h b/arch/arm/include/asm/cputime.h deleted file mode 100644 index 3a8002a5fec7..000000000000 --- a/arch/arm/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_CPUTIME_H -#define __ARM_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __ARM_CPUTIME_H */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cd4458f64171..cb47d28cbe1f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,7 @@ #define CPUID_CACHETYPE 1 #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_MPIDR 5 #define CPUID_EXT_PFR0 "c1, 0" #define CPUID_EXT_PFR1 "c1, 1" @@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) return read_cpuid(CPUID_TCM); } +static inline unsigned int __attribute_const__ read_cpuid_mpidr(void) +{ + return read_cpuid(CPUID_MPIDR); +} + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 9f390ce335cb..6615f03f56a5 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -10,6 +10,9 @@ struct dev_archdata { #ifdef CONFIG_DMABOUNCE struct dmabounce_device_info *dmabounce; #endif +#ifdef CONFIG_IOMMU_API + void *iommu; /* private IOMMU data */ +#endif }; struct pdev_archdata { diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7a21d0bf7134..cb3b7c981c4b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -32,7 +32,7 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { - return (void *)__bus_to_virt(addr); + return (void *)__bus_to_virt((unsigned long)addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) @@ -205,6 +205,13 @@ extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *, int dma_mmap_writecombine(struct device *, struct vm_area_struct *, void *, dma_addr_t, size_t); +/* + * This can be called during boot to increase the size of the consistent + * DMA region above it's default value of 2MB. It must be called before the + * memory allocator is initialised, i.e. before any core_initcall. + */ +extern void __init init_consistent_dma_size(unsigned long size); + #ifdef CONFIG_DMABOUNCE /* diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 628670e9d7c9..69a5b0b6455c 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -34,18 +34,18 @@ #define DMA_MODE_CASCADE 0xc0 #define DMA_AUTOINIT 0x10 -extern spinlock_t dma_spin_lock; +extern raw_spinlock_t dma_spin_lock; static inline unsigned long claim_dma_lock(void) { unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); + raw_spin_lock_irqsave(&dma_spin_lock, flags); return flags; } static inline void release_dma_lock(unsigned long flags) { - spin_unlock_irqrestore(&dma_spin_lock, flags); + raw_spin_unlock_irqrestore(&dma_spin_lock, flags); } /* Clear the 'DMA Pointer Flip Flop'. diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h index 29f2610efc70..eaea14676d57 100644 --- a/arch/arm/include/asm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -161,7 +161,6 @@ struct expansion_card { /* Private internal data */ const char *card_desc; /* Card description */ - CONST unsigned int podaddr; /* Base Linux address for card */ CONST loader_t loader; /* loader program */ u64 dma_mask; }; diff --git a/arch/arm/include/asm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/arch/arm/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 2f1e2098dfe7..88d61815f0c0 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -25,13 +25,6 @@ movne r1, sp adrne lr, BSYM(1b) bne do_IPI - -#ifdef CONFIG_LOCAL_TIMERS - test_for_ltirq r0, r2, r6, lr - movne r0, sp - adrne lr, BSYM(1b) - bne do_local_timer -#endif #endif 9997: .endm diff --git a/arch/arm/include/asm/errno.h b/arch/arm/include/asm/errno.h deleted file mode 100644 index 6e60f0612bb6..000000000000 --- a/arch/arm/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_ERRNO_H -#define _ARM_ERRNO_H - -#include <asm-generic/errno.h> - -#endif diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h new file mode 100644 index 000000000000..5abaf5bbd985 --- /dev/null +++ b/arch/arm/include/asm/exception.h @@ -0,0 +1,19 @@ +/* + * Annotations for marking C functions as exception handlers. + * + * These should only be used for C functions that are called from the low + * level exception entry code and not any intervening C code. + */ +#ifndef __ASM_ARM_EXCEPTION_H +#define __ASM_ARM_EXCEPTION_H + +#include <linux/ftrace.h> + +#define __exception __attribute__((section(".exception.text"))) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#define __exception_irq_entry __irq_entry +#else +#define __exception_irq_entry __exception +#endif + +#endif /* __ASM_ARM_EXCEPTION_H */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 166a7a3e2840..11ad0bfbb0ad 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -4,4 +4,23 @@ /* not all ARM platforms necessarily support this API ... */ #include <mach/gpio.h> +#ifndef __ARM_GPIOLIB_COMPLEX +/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */ +#include <asm-generic/gpio.h> + +/* The trivial gpiolib dispatchers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#endif + +/* + * Provide a default gpio_to_irq() which should satisfy every case. + * However, some platforms want to do this differently, so allow them + * to override it. + */ +#ifndef gpio_to_irq +#define gpio_to_irq __gpio_to_irq +#endif + #endif /* _ARCH_ARM_GPIO_H */ diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index 89ad1805e579..ddf07a92a6c8 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -9,9 +9,6 @@ typedef struct { unsigned int __softirq_pending; -#ifdef CONFIG_LOCAL_TIMERS - unsigned int local_timer_irqs; -#endif #ifdef CONFIG_SMP unsigned int ipi_irqs[NR_IPI]; #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd48031583..434edccdf7f3 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -45,8 +45,15 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 +#define L2X0_ADDR_FILTER_START 0xC00 +#define L2X0_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -60,11 +67,26 @@ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) +#define L2X0_CACHE_ID_RTL_MASK 0x3f +#define L2X0_CACHE_ID_RTL_R0P0 0x0 +#define L2X0_CACHE_ID_RTL_R1P0 0x2 +#define L2X0_CACHE_ID_RTL_R2P0 0x4 +#define L2X0_CACHE_ID_RTL_R3P0 0x5 +#define L2X0_CACHE_ID_RTL_R3P1 0x6 +#define L2X0_CACHE_ID_RTL_R3P2 0x8 #define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 @@ -72,8 +94,33 @@ #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 +#define L2X0_LATENCY_CTRL_RD_SHIFT 4 +#define L2X0_LATENCY_CTRL_WR_SHIFT 8 + +#define L2X0_ADDR_FILTER_EN 1 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); + +struct l2x0_regs { + unsigned long phy_base; + unsigned long aux_ctrl; + /* + * Whether the following registers need to be saved/restored + * depends on platform + */ + unsigned long tag_latency; + unsigned long data_latency; + unsigned long filter_start; + unsigned long filter_end; + unsigned long prefetch_ctrl; + unsigned long pwr_ctrl; +}; + +extern struct l2x0_regs l2x0_saved_regs; + #endif #endif diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S index c115b82fe80a..74ebc803904d 100644 --- a/arch/arm/include/asm/hardware/entry-macro-gic.S +++ b/arch/arm/include/asm/hardware/entry-macro-gic.S @@ -22,15 +22,11 @@ * interrupt controller spec. To wit: * * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. + * 16-31 are local. We allow 30 to be used for the watchdog. * 32-1020 are global * 1021-1022 are reserved * 1023 is "spurious" (no interrupt) * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * * A simple read from the controller will tell us the number of the highest * priority enabled interrupt. We then just need to check whether it is in the * valid range for an IRQ (30-1020 inclusive). @@ -43,7 +39,7 @@ ldr \tmp, =1021 bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #29 + cmp \irqnr, #15 cmpcc \irqnr, \irqnr cmpne \irqnr, \tmp cmpcs \irqnr, \irqnr @@ -62,14 +58,3 @@ strcc \irqstat, [\base, #GIC_CPU_EOI] cmpcs \irqnr, \irqnr .endm - -/* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 435d3f86c708..14867e12f205 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -40,12 +40,19 @@ void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *); void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); -void gic_enable_ppi(unsigned int); struct gic_chip_data { unsigned int irq_offset; void __iomem *dist_base; void __iomem *cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif + unsigned int gic_irqs; }; #endif diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h index b69d972b1f7d..9eda7dc92ad8 100644 --- a/arch/arm/include/asm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + #define IOP3XX_N_GPIOS 8 static inline int gpio_get_value(unsigned gpio) diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index f389b2704d82..c190bc992f0e 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -50,6 +50,7 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_DEBUG_ARCH_V6_1 2 #define ARM_DEBUG_ARCH_V7_ECP14 3 #define ARM_DEBUG_ARCH_V7_MM 4 +#define ARM_DEBUG_ARCH_V7_1 5 /* Breakpoint */ #define ARM_BREAKPOINT_EXECUTE 0 @@ -57,6 +58,7 @@ static inline void decode_ctrl_reg(u32 reg, /* Watchpoints */ #define ARM_BREAKPOINT_LOAD 1 #define ARM_BREAKPOINT_STORE 2 +#define ARM_FSR_ACCESS_MASK (1 << 11) /* Privilege Levels */ #define ARM_BREAKPOINT_PRIV 1 diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index d66605dea55a..065d100fa63e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -80,6 +80,7 @@ extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int, extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int); +extern void __iomem *__arm_ioremap_exec(unsigned long, size_t, bool cached); extern void __iounmap(volatile void __iomem *addr); /* @@ -110,6 +111,27 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #include <mach/io.h> /* + * This is the limit of PC card/PCI/ISA IO space, which is by default + * 64K if we have PC card, PCI or ISA support. Otherwise, default to + * zero to prevent ISA/PCI drivers claiming IO space (and potentially + * oopsing.) + * + * Only set this larger if you really need inb() et.al. to operate over + * a larger address space. Note that SOC_COMMON ioremaps each sockets + * IO space area, and so inb() et.al. must be defined to operate as per + * readb() et.al. on such platforms. + */ +#ifndef IO_SPACE_LIMIT +#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE) +#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff) +#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD) +#define IO_SPACE_LIMIT ((resource_size_t)0xffff) +#else +#define IO_SPACE_LIMIT ((resource_size_t)0) +#endif +#endif + +/* * IO port access primitives * ------------------------- * @@ -189,11 +211,11 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * IO port primitives for more information. */ #ifdef __mem_pci -#define readb_relaxed(c) ({ u8 __v = __raw_readb(__mem_pci(c)); __v; }) -#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__mem_pci(c))); __v; }) -#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__mem_pci(c))); __v; }) +#define readb_relaxed(c) ({ u8 __r = __raw_readb(__mem_pci(c)); __r; }) +#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \ + __raw_readw(__mem_pci(c))); __r; }) +#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \ + __raw_readl(__mem_pci(c))); __r; }) #define writeb_relaxed(v,c) ((void)__raw_writeb(v,__mem_pci(c))) #define writew_relaxed(v,c) ((void)__raw_writew((__force u16) \ @@ -238,7 +260,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #ifndef __arch_ioremap @@ -260,10 +282,16 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; }) #define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; }) +#define ioread16be(p) ({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; }) +#define ioread32be(p) ({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; }) + #define iowrite8(v,p) ({ __iowmb(); (void)__raw_writeb(v, p); }) #define iowrite16(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); }) #define iowrite32(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); }) +#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); }) +#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); }) + #define ioread8_rep(p,d,c) __raw_readsb(p,d,c) #define ioread16_rep(p,d,c) __raw_readsw(p,d,c) #define ioread32_rep(p,d,c) __raw_readsl(p,d,c) diff --git a/arch/arm/include/asm/ioctl.h b/arch/arm/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/arch/arm/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/arch/arm/include/asm/irq_regs.h b/arch/arm/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/arch/arm/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/arm/include/asm/kdebug.h b/arch/arm/include/asm/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/arch/arm/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/arch/arm/include/asm/local.h b/arch/arm/include/asm/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/arch/arm/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local.h> diff --git a/arch/arm/include/asm/local64.h b/arch/arm/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/arm/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index 080d74f8128d..c6a18424888e 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -10,6 +10,9 @@ #ifndef __ASM_ARM_LOCALTIMER_H #define __ASM_ARM_LOCALTIMER_H +#include <linux/errno.h> +#include <linux/interrupt.h> + struct clock_event_device; /* @@ -17,27 +20,20 @@ struct clock_event_device; */ void percpu_timer_setup(void); -/* - * Called from assembly, this is the local timer IRQ handler - */ -asmlinkage void do_local_timer(struct pt_regs *); - - #ifdef CONFIG_LOCAL_TIMERS #ifdef CONFIG_HAVE_ARM_TWD #include "smp_twd.h" -#define local_timer_ack() twd_timer_ack() +#define local_timer_stop(c) twd_timer_stop((c)) #else /* - * Platform provides this to acknowledge a local timer IRQ. - * Returns true if the local timer IRQ is to be processed. + * Stop the local timer */ -int local_timer_ack(void); +void local_timer_stop(struct clock_event_device *); #endif @@ -52,6 +48,10 @@ static inline int local_timer_setup(struct clock_event_device *evt) { return -ENXIO; } + +static inline void local_timer_stop(struct clock_event_device *evt) +{ +} #endif #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 217aa1911dd7..7d19425dd496 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -17,7 +17,7 @@ struct sys_timer; struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ - unsigned long boot_params; /* tagged list */ + unsigned long atag_offset; /* tagged list (relative) */ const char **dt_compat; /* array of device tree * 'compatible' strings */ @@ -34,8 +34,7 @@ struct machine_desc { unsigned int reserve_lp1 :1; /* never has lp1 */ unsigned int reserve_lp2 :1; /* never has lp2 */ unsigned int soft_reboot :1; /* soft reboot */ - void (*fixup)(struct machine_desc *, - struct tag *, char **, + void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index d2fedb5aeb1f..b36f3654bf54 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -29,6 +29,7 @@ struct map_desc { #define MT_MEMORY_NONCACHED 11 #define MT_MEMORY_DTCM 12 #define MT_MEMORY_ITCM 13 +#define MT_MEMORY_SO 14 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index b8de516e600e..a8997d71084e 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -16,9 +16,12 @@ #include <linux/compiler.h> #include <linux/const.h> #include <linux/types.h> -#include <mach/memory.h> #include <asm/sizes.h> +#ifdef CONFIG_NEED_MACH_MEMORY_H +#include <mach/memory.h> +#endif + /* * Allow for constants defined here to be used from assembly code * by prepending the UL suffix only with actual C code compilation. @@ -77,16 +80,7 @@ */ #define IOREMAP_MAX_ORDER 24 -/* - * Size of DMA-consistent memory region. Must be multiple of 2M, - * between 2MB and 14MB inclusive. - */ -#ifndef CONSISTENT_DMA_SIZE -#define CONSISTENT_DMA_SIZE SZ_2M -#endif - #define CONSISTENT_END (0xffe00000UL) -#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE) #else /* CONFIG_MMU */ @@ -160,7 +154,6 @@ * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 -#define __PV_BITS_23_16 0x00810000 extern unsigned long __pv_phys_offset; #define PHYS_OFFSET __pv_phys_offset @@ -178,9 +171,6 @@ static inline unsigned long __virt_to_phys(unsigned long x) { unsigned long t; __pv_stub(x, t, "add", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "add", __PV_BITS_23_16); -#endif return t; } @@ -188,9 +178,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) { unsigned long t; __pv_stub(x, t, "sub", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "sub", __PV_BITS_23_16); -#endif return t; } #else @@ -200,7 +187,11 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #ifndef PHYS_OFFSET +#ifdef PLAT_PHYS_OFFSET #define PHYS_OFFSET PLAT_PHYS_OFFSET +#else +#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#endif #endif /* diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index b4ffe9d5b526..14965658a923 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -6,7 +6,7 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID unsigned int id; - spinlock_t id_lock; + raw_spinlock_t id_lock; #endif unsigned int kvm_seq; } mm_context_t; @@ -16,7 +16,7 @@ typedef struct { /* init_mm.context.id_lock should be initialized. */ #define INIT_MM_CONTEXT(name) \ - .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock), + .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock), #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 543b44916d2c..6c6809f982f1 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -31,11 +31,7 @@ struct mod_arch_specific { /* Add __virt_to_phys patching state as well */ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT -#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " -#else #define MODULE_ARCH_VERMAGIC_P2V "p2v8 " -#endif #else #define MODULE_ARCH_VERMAGIC_P2V "" #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index d8387437ec5a..53426c66352a 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -34,6 +34,7 @@ struct outer_cache_fns { void (*sync)(void); #endif void (*set_debug)(unsigned long); + void (*resume)(void); }; #ifdef CONFIG_OUTER_CACHE @@ -74,6 +75,12 @@ static inline void outer_disable(void) outer_cache.disable(); } +static inline void outer_resume(void) +{ + if (outer_cache.resume) + outer_cache.resume(); +} + #else static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ac75d0848889..ca94653f1ecb 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -151,47 +151,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); -typedef unsigned long pteval_t; - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { pteval_t pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd[2]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef pteval_t pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ +#include <asm/pgtable-2level-types.h> #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h deleted file mode 100644 index b4e32d8ec072..000000000000 --- a/arch/arm/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_PERCPU -#define __ARM_PERCPU - -#include <asm-generic/percpu.h> - -#endif diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 22de005f159c..3e08fd3fbb6b 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -105,9 +105,9 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) } static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte, - unsigned long prot) + pmdval_t prot) { - unsigned long pmdval = (pte + PTE_HWTABLE_OFF) | prot; + pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot; pmdp[0] = __pmd(pmdval); pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); flush_pmd_entry(pmdp); diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h new file mode 100644 index 000000000000..5cfba15cb401 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -0,0 +1,93 @@ +/* + * arch/arm/include/asm/pgtable-2level-hwdef.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H +#define _ASM_PGTABLE_2LEVEL_HWDEF_H + +/* + * Hardware page table definitions. + * + * + Level 1 descriptor (PMD) + * - common + */ +#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) +#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) +#define PMD_TYPE_TABLE (_AT(pmdval_t, 1) << 0) +#define PMD_TYPE_SECT (_AT(pmdval_t, 2) << 0) +#define PMD_BIT4 (_AT(pmdval_t, 1) << 4) +#define PMD_DOMAIN(x) (_AT(pmdval_t, (x)) << 5) +#define PMD_PROTECTION (_AT(pmdval_t, 1) << 9) /* v5 */ +/* + * - section + */ +#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) +#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) +#define PMD_SECT_XN (_AT(pmdval_t, 1) << 4) /* v6 */ +#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 1) << 10) +#define PMD_SECT_AP_READ (_AT(pmdval_t, 1) << 11) +#define PMD_SECT_TEX(x) (_AT(pmdval_t, (x)) << 12) /* v5 */ +#define PMD_SECT_APX (_AT(pmdval_t, 1) << 15) /* v6 */ +#define PMD_SECT_S (_AT(pmdval_t, 1) << 16) /* v6 */ +#define PMD_SECT_nG (_AT(pmdval_t, 1) << 17) /* v6 */ +#define PMD_SECT_SUPER (_AT(pmdval_t, 1) << 18) /* v6 */ +#define PMD_SECT_AF (_AT(pmdval_t, 0)) + +#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0)) +#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) +#define PMD_SECT_WT (PMD_SECT_CACHEABLE) +#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) +#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) + +/* + * - coarse table (not used) + */ + +/* + * + Level 2 descriptor (PTE) + * - common + */ +#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) +#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) +#define PTE_TYPE_LARGE (_AT(pteval_t, 1) << 0) +#define PTE_TYPE_SMALL (_AT(pteval_t, 2) << 0) +#define PTE_TYPE_EXT (_AT(pteval_t, 3) << 0) /* v5 */ +#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) +#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) + +/* + * - extended small page/tiny page + */ +#define PTE_EXT_XN (_AT(pteval_t, 1) << 0) /* v6 */ +#define PTE_EXT_AP_MASK (_AT(pteval_t, 3) << 4) +#define PTE_EXT_AP0 (_AT(pteval_t, 1) << 4) +#define PTE_EXT_AP1 (_AT(pteval_t, 2) << 4) +#define PTE_EXT_AP_UNO_SRO (_AT(pteval_t, 0) << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) +#define PTE_EXT_TEX(x) (_AT(pteval_t, (x)) << 6) /* v5 */ +#define PTE_EXT_APX (_AT(pteval_t, 1) << 9) /* v6 */ +#define PTE_EXT_COHERENT (_AT(pteval_t, 1) << 9) /* XScale3 */ +#define PTE_EXT_SHARED (_AT(pteval_t, 1) << 10) /* v6 */ +#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* v6 */ + +/* + * - small page + */ +#define PTE_SMALL_AP_MASK (_AT(pteval_t, 0xff) << 4) +#define PTE_SMALL_AP_UNO_SRO (_AT(pteval_t, 0x00) << 4) +#define PTE_SMALL_AP_UNO_SRW (_AT(pteval_t, 0x55) << 4) +#define PTE_SMALL_AP_URO_SRW (_AT(pteval_t, 0xaa) << 4) +#define PTE_SMALL_AP_URW_SRW (_AT(pteval_t, 0xff) << 4) + +#define PHYS_MASK (~0UL) + +#endif diff --git a/arch/arm/include/asm/pgtable-2level-types.h b/arch/arm/include/asm/pgtable-2level-types.h new file mode 100644 index 000000000000..66cb5b0e89c5 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-types.h @@ -0,0 +1,67 @@ +/* + * arch/arm/include/asm/pgtable-2level-types.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_2LEVEL_TYPES_H +#define _ASM_PGTABLE_2LEVEL_TYPES_H + +#include <asm/types.h> + +typedef u32 pteval_t; +typedef u32 pmdval_t; + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { pteval_t pte; } pte_t; +typedef struct { pmdval_t pmd; } pmd_t; +typedef struct { pmdval_t pgd[2]; } pgd_t; +typedef struct { pteval_t pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef pteval_t pte_t; +typedef pmdval_t pmd_t; +typedef pmdval_t pgd_t[2]; +typedef pteval_t pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* _ASM_PGTABLE_2LEVEL_TYPES_H */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h new file mode 100644 index 000000000000..470457e1cfc5 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level.h @@ -0,0 +1,143 @@ +/* + * arch/arm/include/asm/pgtable-2level.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_H +#define _ASM_PGTABLE_2LEVEL_H + +/* + * Hardware-wise, we have a two level page table structure, where the first + * level has 4096 entries, and the second level has 256 entries. Each entry + * is one 32-bit word. Most of the bits in the second level entry are used + * by hardware, and there aren't any "accessed" and "dirty" bits. + * + * Linux on the other hand has a three level page table structure, which can + * be wrapped to fit a two level page table structure easily - using the PGD + * and PTE only. However, Linux also expects one "PTE" table per page, and + * at least a "dirty" bit. + * + * Therefore, we tweak the implementation slightly - we tell Linux that we + * have 2048 entries in the first level, each of which is 8 bytes (iow, two + * hardware pointers to the second level.) The second level contains two + * hardware PTE tables arranged contiguously, preceded by Linux versions + * which contain the state information Linux needs. We, therefore, end up + * with 512 entries in the "PTE" level. + * + * This leads to the page tables having the following layout: + * + * pgd pte + * | | + * +--------+ + * | | +------------+ +0 + * +- - - - + | Linux pt 0 | + * | | +------------+ +1024 + * +--------+ +0 | Linux pt 1 | + * | |-----> +------------+ +2048 + * +- - - - + +4 | h/w pt 0 | + * | |-----> +------------+ +3072 + * +--------+ +8 | h/w pt 1 | + * | | +------------+ +4096 + * + * See L_PTE_xxx below for definitions of bits in the "Linux pt", and + * PTE_xxx for definitions of bits appearing in the "h/w pt". + * + * PMD_xxx definitions refer to bits in the first level page table. + * + * The "dirty" bit is emulated by only granting hardware write permission + * iff the page is marked "writable" and "dirty" in the Linux PTE. This + * means that a write to a clean page will cause a permission fault, and + * the Linux MM layer will mark the page dirty via handle_pte_fault(). + * For the hardware to notice the permission change, the TLB entry must + * be flushed, and ptep_set_access_flags() does that for us. + * + * The "accessed" or "young" bit is emulated by a similar method; we only + * allow accesses to the page if the "young" bit is set. Accesses to the + * page will cause a fault, and handle_pte_fault() will set the young bit + * for us as long as the page is marked present in the corresponding Linux + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. + * + * However, when the "young" bit is cleared, we deny access to the page + * by clearing the hardware PTE. Currently Linux does not flush the TLB + * for us in this case, which means the TLB will retain the transation + * until either the TLB entry is evicted under pressure, or a context + * switch which changes the user space mapping occurs. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 + +#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) +#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) +#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PMD_SHIFT 21 +#define PGDIR_SHIFT 21 + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +/* + * ARMv6 supersection address mask and size definitions. + */ +#define SUPERSECTION_SHIFT 24 +#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) +#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +/* + * "Linux" PTE definitions. + * + * We keep two sets of PTEs - the hardware and the linux version. + * This allows greater flexibility in the way we map the Linux bits + * onto the hardware tables, and allows us to have YOUNG and DIRTY + * bits. + * + * The PTE table pointer refers to the hardware entries; the "Linux" + * entries are stored 1024 bytes below. + */ +#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) +#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) +#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) +#define L_PTE_USER (_AT(pteval_t, 1) << 8) +#define L_PTE_XN (_AT(pteval_t, 1) << 9) +#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ + +/* + * These are the memory types, defined to be compatible with + * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB + */ +#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ +#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ +#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ +#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ +#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ +#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ +#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ +#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ +#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ +#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ +#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) + +#endif /* _ASM_PGTABLE_2LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h index fd1521d5cb9d..183111164ce9 100644 --- a/arch/arm/include/asm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -10,81 +10,6 @@ #ifndef _ASMARM_PGTABLE_HWDEF_H #define _ASMARM_PGTABLE_HWDEF_H -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_FAULT (0 << 0) -#define PMD_TYPE_TABLE (1 << 0) -#define PMD_TYPE_SECT (2 << 0) -#define PMD_BIT4 (1 << 4) -#define PMD_DOMAIN(x) ((x) << 5) -#define PMD_PROTECTION (1 << 9) /* v5 */ -/* - * - section - */ -#define PMD_SECT_BUFFERABLE (1 << 2) -#define PMD_SECT_CACHEABLE (1 << 3) -#define PMD_SECT_XN (1 << 4) /* v6 */ -#define PMD_SECT_AP_WRITE (1 << 10) -#define PMD_SECT_AP_READ (1 << 11) -#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ -#define PMD_SECT_APX (1 << 15) /* v6 */ -#define PMD_SECT_S (1 << 16) /* v6 */ -#define PMD_SECT_nG (1 << 17) /* v6 */ -#define PMD_SECT_SUPER (1 << 18) /* v6 */ - -#define PMD_SECT_UNCACHED (0) -#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) -#define PMD_SECT_WT (PMD_SECT_CACHEABLE) -#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) -#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) - -/* - * - coarse table (not used) - */ - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_FAULT (0 << 0) -#define PTE_TYPE_LARGE (1 << 0) -#define PTE_TYPE_SMALL (2 << 0) -#define PTE_TYPE_EXT (3 << 0) /* v5 */ -#define PTE_BUFFERABLE (1 << 2) -#define PTE_CACHEABLE (1 << 3) - -/* - * - extended small page/tiny page - */ -#define PTE_EXT_XN (1 << 0) /* v6 */ -#define PTE_EXT_AP_MASK (3 << 4) -#define PTE_EXT_AP0 (1 << 4) -#define PTE_EXT_AP1 (2 << 4) -#define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) -#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) -#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) -#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ -#define PTE_EXT_APX (1 << 9) /* v6 */ -#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ -#define PTE_EXT_SHARED (1 << 10) /* v6 */ -#define PTE_EXT_NG (1 << 11) /* v6 */ - -/* - * - small page - */ -#define PTE_SMALL_AP_MASK (0xff << 4) -#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) -#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) -#define PTE_SMALL_AP_URO_SRW (0xaa << 4) -#define PTE_SMALL_AP_URW_SRW (0xff << 4) +#include <asm/pgtable-2level-hwdef.h> #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 5750704e0271..9451dce3a553 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -24,6 +24,8 @@ #include <mach/vmalloc.h> #include <asm/pgtable-hwdef.h> +#include <asm/pgtable-2level.h> + /* * Just any arbitrary offset to the start of the vmalloc VM area: the * current 8MB value just means that there will be a 8MB "hole" after the @@ -41,79 +43,6 @@ #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #endif -/* - * Hardware-wise, we have a two level page table structure, where the first - * level has 4096 entries, and the second level has 256 entries. Each entry - * is one 32-bit word. Most of the bits in the second level entry are used - * by hardware, and there aren't any "accessed" and "dirty" bits. - * - * Linux on the other hand has a three level page table structure, which can - * be wrapped to fit a two level page table structure easily - using the PGD - * and PTE only. However, Linux also expects one "PTE" table per page, and - * at least a "dirty" bit. - * - * Therefore, we tweak the implementation slightly - we tell Linux that we - * have 2048 entries in the first level, each of which is 8 bytes (iow, two - * hardware pointers to the second level.) The second level contains two - * hardware PTE tables arranged contiguously, preceded by Linux versions - * which contain the state information Linux needs. We, therefore, end up - * with 512 entries in the "PTE" level. - * - * This leads to the page tables having the following layout: - * - * pgd pte - * | | - * +--------+ - * | | +------------+ +0 - * +- - - - + | Linux pt 0 | - * | | +------------+ +1024 - * +--------+ +0 | Linux pt 1 | - * | |-----> +------------+ +2048 - * +- - - - + +4 | h/w pt 0 | - * | |-----> +------------+ +3072 - * +--------+ +8 | h/w pt 1 | - * | | +------------+ +4096 - * - * See L_PTE_xxx below for definitions of bits in the "Linux pt", and - * PTE_xxx for definitions of bits appearing in the "h/w pt". - * - * PMD_xxx definitions refer to bits in the first level page table. - * - * The "dirty" bit is emulated by only granting hardware write permission - * iff the page is marked "writable" and "dirty" in the Linux PTE. This - * means that a write to a clean page will cause a permission fault, and - * the Linux MM layer will mark the page dirty via handle_pte_fault(). - * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_set_access_flags() does that for us. - * - * The "accessed" or "young" bit is emulated by a similar method; we only - * allow accesses to the page if the "young" bit is set. Accesses to the - * page will cause a fault, and handle_pte_fault() will set the young bit - * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is - * up to date. - * - * However, when the "young" bit is cleared, we deny access to the page - * by clearing the hardware PTE. Currently Linux does not flush the TLB - * for us in this case, which means the TLB will retain the transation - * until either the TLB entry is evicted under pressure, or a context - * switch which changes the user space mapping occurs. - */ -#define PTRS_PER_PTE 512 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 - -#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) -#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) -#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) - -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PMD_SHIFT 21 -#define PGDIR_SHIFT 21 - #define LIBRARY_TEXT_START 0x0c000000 #ifndef __ASSEMBLY__ @@ -124,12 +53,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte) #define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd) #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd) -#endif /* !__ASSEMBLY__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) /* * This is the lowest virtual address we can permit any user space @@ -138,60 +61,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); */ #define FIRST_USER_ADDRESS PAGE_SIZE -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 20 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -/* - * ARMv6 supersection address mask and size definitions. - */ -#define SUPERSECTION_SHIFT 24 -#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) -#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) - -/* - * "Linux" PTE definitions. - * - * We keep two sets of PTEs - the hardware and the linux version. - * This allows greater flexibility in the way we map the Linux bits - * onto the hardware tables, and allows us to have YOUNG and DIRTY - * bits. - * - * The PTE table pointer refers to the hardware entries; the "Linux" - * entries are stored 1024 bytes below. - */ -#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) -#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) -#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ -#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) -#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) -#define L_PTE_USER (_AT(pteval_t, 1) << 8) -#define L_PTE_XN (_AT(pteval_t, 1) << 9) -#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ - -/* - * These are the memory types, defined to be compatible with - * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB - */ -#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ -#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ -#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ -#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ -#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ -#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ -#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ -#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ -#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ -#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ -#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) - -#ifndef __ASSEMBLY__ - /* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, @@ -232,6 +101,9 @@ extern pgprot_t pgprot_kernel; #define pgprot_writecombine(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) +#define pgprot_stronglyordered(prot) \ + __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) + #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN) @@ -327,10 +199,10 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; static inline pte_t *pmd_page_vaddr(pmd_t pmd) { - return __va(pmd_val(pmd) & PAGE_MASK); + return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK); } -#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) /* we don't need complex calculations here as the pmd is folded into the pgd */ #define pmd_addr_end(addr,end) (end) @@ -351,7 +223,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr)) #define pte_unmap(pte) __pte_unmap(pte) -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT) #define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 67c70a31a1be..71d99b83cdb9 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -13,7 +13,12 @@ #define __ARM_PMU_H__ #include <linux/interrupt.h> +#include <linux/perf_event.h> +/* + * Types of PMUs that can be accessed directly and require mutual + * exclusion between profiling tools. + */ enum arm_pmu_type { ARM_PMU_DEVICE_CPU = 0, ARM_NUM_PMU_DEVICES, @@ -37,21 +42,17 @@ struct arm_pmu_platdata { * reserve_pmu() - reserve the hardware performance counters * * Reserve the hardware performance counters in the system for exclusive use. - * The platform_device for the system is returned on success, ERR_PTR() - * encoded error on failure. + * Returns 0 on success or -EBUSY if the lock is already held. */ -extern struct platform_device * -reserve_pmu(enum arm_pmu_type device); +extern int +reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters * * Release the performance counters and allow someone else to use them. - * Callers must have disabled the counters and released IRQs before calling - * this. The platform_device returned from reserve_pmu() must be passed as - * a cookie. */ -extern int +extern void release_pmu(enum arm_pmu_type type); /** @@ -62,30 +63,84 @@ release_pmu(enum arm_pmu_type type); * the actual hardware initialisation. */ extern int -init_pmu(enum arm_pmu_type device); +init_pmu(enum arm_pmu_type type); #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> -static inline struct platform_device * -reserve_pmu(enum arm_pmu_type device) -{ - return ERR_PTR(-ENODEV); -} - static inline int -release_pmu(struct platform_device *pdev) +reserve_pmu(enum arm_pmu_type type) { return -ENODEV; } -static inline int -init_pmu(enum arm_pmu_type device) -{ - return -ENODEV; -} +static inline void +release_pmu(enum arm_pmu_type type) { } #endif /* CONFIG_CPU_HAS_PMU */ +#ifdef CONFIG_HW_PERF_EVENTS + +/* The events for a given PMU register set. */ +struct pmu_hw_events { + /* + * The events that are active on the PMU for the given index. + */ + struct perf_event **events; + + /* + * A 1 bit for an index indicates that the counter is being used for + * an event. A 0 means that the counter can be used. + */ + unsigned long *used_mask; + + /* + * Hardware lock to serialize accesses to PMU registers. Needed for the + * read/modify/write sequences. + */ + raw_spinlock_t pmu_lock; +}; + +struct arm_pmu { + struct pmu pmu; + enum arm_perf_pmu_ids id; + enum arm_pmu_type type; + cpumask_t active_irqs; + const char *name; + irqreturn_t (*handle_irq)(int irq_num, void *dev); + void (*enable)(struct hw_perf_event *evt, int idx); + void (*disable)(struct hw_perf_event *evt, int idx); + int (*get_event_idx)(struct pmu_hw_events *hw_events, + struct hw_perf_event *hwc); + int (*set_event_filter)(struct hw_perf_event *evt, + struct perf_event_attr *attr); + u32 (*read_counter)(int idx); + void (*write_counter)(int idx, u32 val); + void (*start)(void); + void (*stop)(void); + void (*reset)(void *); + int (*map_event)(struct perf_event *event); + int num_events; + atomic_t active_events; + struct mutex reserve_mutex; + u64 max_period; + struct platform_device *plat_device; + struct pmu_hw_events *(*get_hw_events)(void); +}; + +#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) + +int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); + +u64 armpmu_event_update(struct perf_event *event, + struct hw_perf_event *hwc, + int idx, int overflow); + +int armpmu_event_set_period(struct perf_event *event, + struct hw_perf_event *hwc, + int idx); + +#endif /* CONFIG_HW_PERF_EVENTS */ + #endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/include/asm/poll.h b/arch/arm/include/asm/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/arch/arm/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/poll.h> diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 633d1cb84d87..9e92cb205e65 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -81,6 +81,10 @@ extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); + +/* These three are private to arch/arm/kernel/suspend.c */ +extern void cpu_do_suspend(void *); +extern void cpu_do_resume(void *); #else #define cpu_proc_init processor._proc_init #define cpu_proc_fin processor._proc_fin @@ -89,6 +93,10 @@ extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #define cpu_dcache_clean_area processor.dcache_clean_area #define cpu_set_pte_ext processor.set_pte_ext #define cpu_do_switch_mm processor.switch_mm + +/* These three are private to arch/arm/kernel/suspend.c */ +#define cpu_do_suspend processor.do_suspend +#define cpu_do_resume processor.do_resume #endif extern void cpu_resume(void); diff --git a/arch/arm/include/asm/resource.h b/arch/arm/include/asm/resource.h deleted file mode 100644 index 734b581b5b6a..000000000000 --- a/arch/arm/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_RESOURCE_H -#define _ARM_RESOURCE_H - -#include <asm-generic/resource.h> - -#endif diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h deleted file mode 100644 index 2b8c5160388f..000000000000 --- a/arch/arm/include/asm/sections.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sections.h> diff --git a/arch/arm/include/asm/siginfo.h b/arch/arm/include/asm/siginfo.h deleted file mode 100644 index 5e21852e6039..000000000000 --- a/arch/arm/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASMARM_SIGINFO_H -#define _ASMARM_SIGINFO_H - -#include <asm-generic/siginfo.h> - -#endif diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h deleted file mode 100644 index 154b89b81d3e..000000000000 --- a/arch/arm/include/asm/sizes.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Size definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ -#include <asm-generic/sizes.h> - -#define SZ_48M (SZ_32M + SZ_16M) diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e42d96a45d3e..1e5717afc4ac 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -33,6 +33,11 @@ extern void show_ipi_list(struct seq_file *, int); asmlinkage void do_IPI(int ipinr, struct pt_regs *regs); /* + * Called from C code, this handles an IPI. + */ +void handle_IPI(int ipinr, struct pt_regs *regs); + +/* * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -66,6 +71,12 @@ extern void platform_secondary_init(unsigned int cpu); extern void platform_smp_prepare_cpus(unsigned int); /* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* * Initial data for bringing up a secondary CPU. */ struct secondary_data { @@ -88,9 +99,4 @@ extern void platform_cpu_enable(unsigned int cpu); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); -/* - * show local interrupt info - */ -extern void show_local_irqs(struct seq_file *, int); - #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index fed9981fba08..ef9ffba97ad8 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -22,7 +22,7 @@ struct clock_event_device; extern void __iomem *twd_base; -int twd_timer_ack(void); void twd_timer_setup(struct clock_event_device *); +void twd_timer_stop(struct clock_event_device *); #endif diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index b0e4e1a02318..1c0a551ae375 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -1,22 +1,7 @@ #ifndef __ASM_ARM_SUSPEND_H #define __ASM_ARM_SUSPEND_H -#include <asm/memory.h> -#include <asm/tlbflush.h> - extern void cpu_resume(void); - -/* - * Hide the first two arguments to __cpu_suspend - these are an implementation - * detail which platform code shouldn't have to know about. - */ -static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) -{ - extern int __cpu_suspend(int, long, unsigned long, - int (*)(unsigned long)); - int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); - flush_tlb_all(); - return ret; -} +extern int cpu_suspend(unsigned long, int (*)(unsigned long)); #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 832888d0c20c..984014b92647 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -57,18 +57,12 @@ #ifndef __ASSEMBLY__ +#include <linux/compiler.h> #include <linux/linkage.h> #include <linux/irqflags.h> #include <asm/outercache.h> -#define __exception __attribute__((section(".exception.text"))) -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -#define __exception_irq_entry __irq_entry -#else -#define __exception_irq_entry __exception -#endif - struct thread_info; struct task_struct; @@ -97,14 +91,13 @@ void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) -extern asmlinkage void __backtrace(void); extern asmlinkage void c_backtrace(unsigned long fp, int pmode); struct mm_struct; extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); -extern int cpu_architecture(void); +extern int __pure cpu_architecture(void); extern void cpu_init(void); void arm_machine_restart(char mode, const char *cmd); diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 8077145698ff..02b2f8203982 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -471,7 +471,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) * these operations. This is typically used when we are removing * PMD entries. */ -static inline void flush_pmd_entry(pmd_t *pmd) +static inline void flush_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -487,7 +487,7 @@ static inline void flush_pmd_entry(pmd_t *pmd) dsb(); } -static inline void clean_pmd_entry(pmd_t *pmd) +static inline void clean_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index accbd7cad9b5..a7e457ed27c3 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -1,6 +1,39 @@ #ifndef _ASM_ARM_TOPOLOGY_H #define _ASM_ARM_TOPOLOGY_H +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(unsigned int cpu); + +#else + +static inline void init_cpu_topology(void) { } +static inline void store_cpu_topology(unsigned int cpuid) { } + +#endif + #include <asm-generic/topology.h> #endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index f7887dc53c1f..16eed6aebfa4 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM_SLEEP) += sleep.o +obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o @@ -43,6 +43,13 @@ obj-$(CONFIG_KPROBES) += kprobes-thumb.o else obj-$(CONFIG_KPROBES) += kprobes-arm.o endif +obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o +test-kprobes-objs := kprobes-test.o +ifdef CONFIG_THUMB2_KERNEL +test-kprobes-objs += kprobes-test-thumb.o +else +test-kprobes-objs += kprobes-test-arm.o +endif obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o @@ -66,6 +73,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_CPU_HAS_PMU) += pmu.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt +obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index aeef960ff795..8e3c6f11b0a1 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -49,9 +49,6 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); - -EXPORT_SYMBOL(__backtrace); - /* platform dependent support */ EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__const_udelay); diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 16baba2e4369..1429d8989fb9 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -20,6 +20,7 @@ #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/procinfo.h> +#include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> /* @@ -92,6 +93,17 @@ int main(void) DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); +#ifdef CONFIG_CACHE_L2X0 + DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); + DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl)); + DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency)); + DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency)); + DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start)); + DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end)); + DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl)); + DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl)); + BLANK(); +#endif #ifdef CONFIG_CPU_HAS_ASID DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id)); BLANK(); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index d6df359408f0..c0d9203fc75e 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -412,6 +412,9 @@ void pcibios_fixup_bus(struct pci_bus *bus) printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); } +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_fixup_bus); +#endif /* * Convert from Linux-centric to bus-centric addresses for bridge devices. @@ -431,6 +434,7 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->start = res->start - offset; region->end = res->end - offset; } +EXPORT_SYMBOL(pcibios_resource_to_bus); void __devinit pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, @@ -447,12 +451,7 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->start = region->start + offset; res->end = region->end + offset; } - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_fixup_bus); -EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif /* * Swizzle the device pin each time we cross a bridge. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 80f7896cc016..9943e9e74a1b 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -178,7 +178,7 @@ CALL(sys_ni_syscall) /* vm86 */ CALL(sys_ni_syscall) /* was sys_query_module */ CALL(sys_poll) - CALL(sys_nfsservctl) + CALL(sys_ni_syscall) /* was nfsservctl */ /* 170 */ CALL(sys_setresgid16) CALL(sys_getresgid16) CALL(sys_prctl) diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index bcd66e00bdbe..204e2160cfcc 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -22,7 +22,7 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp .endm #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) @@ -106,7 +106,7 @@ #ifdef CONFIG_MMU .macro addruart_current, rx, tmp1, tmp2 - addruart \tmp1, \tmp2 + addruart \tmp1, \tmp2, \rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 moveq \rx, \tmp1 @@ -151,6 +151,8 @@ printhex: adr r2, hexbuf b printascii ENDPROC(printhex2) +hexbuf: .space 16 + .ltorg ENTRY(printascii) @@ -175,5 +177,3 @@ ENTRY(printch) mov r0, #0 b 1b ENDPROC(printch) - -hexbuf: .space 16 diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 2c4a185f92cd..7b829d9663b1 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -23,7 +23,7 @@ #include <asm/mach/dma.h> -DEFINE_SPINLOCK(dma_spin_lock); +DEFINE_RAW_SPINLOCK(dma_spin_lock); EXPORT_SYMBOL(dma_spin_lock); static dma_t *dma_chan[MAX_DMA_CHANNELS]; diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index d16500110ee9..4dd0edab6a65 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -237,7 +237,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE)); - src_pgd = pgd_offset(mm, EASI_BASE); + src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE); dst_pgd = pgd_offset(mm, EASI_START); memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); @@ -674,44 +674,37 @@ static int __init ecard_probeirqhw(void) #define ecard_probeirqhw() (0) #endif -#ifndef IO_EC_MEMC8_BASE -#define IO_EC_MEMC8_BASE 0 -#endif - -static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) +static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) { - unsigned long address = 0; + void __iomem *address = NULL; int slot = ec->slot_no; if (ec->slot_no == 8) - return IO_EC_MEMC8_BASE; + return ECARD_MEMC8_BASE; ectcr &= ~(1 << slot); switch (type) { case ECARD_MEMC: if (slot < 4) - address = IO_EC_MEMC_BASE + (slot << 12); + address = ECARD_MEMC_BASE + (slot << 14); break; case ECARD_IOC: if (slot < 4) - address = IO_EC_IOC_BASE + (slot << 12); -#ifdef IO_EC_IOC4_BASE + address = ECARD_IOC_BASE + (slot << 14); else - address = IO_EC_IOC4_BASE + ((slot - 4) << 12); -#endif + address = ECARD_IOC4_BASE + ((slot - 4) << 14); if (address) - address += speed << 17; + address += speed << 19; break; -#ifdef IO_EC_EASI_BASE case ECARD_EASI: - address = IO_EC_EASI_BASE + (slot << 22); + address = ECARD_EASI_BASE + (slot << 24); if (speed == ECARD_FAST) ectcr |= 1 << slot; break; -#endif + default: break; } @@ -990,6 +983,7 @@ ecard_probe(int slot, card_type_t type) ecard_t **ecp; ecard_t *ec; struct ex_ecid cid; + void __iomem *addr; int i, rc; ec = ecard_alloc_card(type, slot); @@ -999,7 +993,7 @@ ecard_probe(int slot, card_type_t type) } rc = -ENODEV; - if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0) + if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL) goto nodev; cid.r_zero = 1; @@ -1019,7 +1013,7 @@ ecard_probe(int slot, card_type_t type) ec->cid.fiqmask = cid.r_fiqmask; ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff); ec->fiqaddr = - ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr); + ec->irqaddr = addr; if (ec->cid.is) { ec->irqmask = ec->cid.irqmask; @@ -1048,10 +1042,8 @@ ecard_probe(int slot, card_type_t type) set_irq_flags(ec->irq, IRQF_VALID); } -#ifdef IO_EC_MEMC8_BASE if (slot == 8) ec->irq = 11; -#endif #ifdef CONFIG_ARCH_RPC /* On RiscPC, only first two slots have DMA capability */ if (slot < 2) @@ -1097,9 +1089,7 @@ static int __init ecard_init(void) ecard_probe(slot, ECARD_IOC); } -#ifdef IO_EC_MEMC8_BASE ecard_probe(8, ECARD_IOC); -#endif irqhw = ecard_probeirqhw(); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a87cbf889ff4..9ad50c4208ae 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -24,6 +24,7 @@ #include <asm/unwind.h> #include <asm/unistd.h> #include <asm/tls.h> +#include <asm/system.h> #include "entry-header.S" #include <asm/entry-macro-multi.S> @@ -262,8 +263,7 @@ __und_svc: ldr r0, [r4, #-4] #else ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 - and r9, r0, #0xf800 - cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 + cmp r0, #0xe800 @ 32-bit instruction if xx >= 0 ldrhhs r9, [r4] @ bottom 16 bits orrhs r0, r9, r0, lsl #16 #endif @@ -440,18 +440,46 @@ __und_usr: #endif beq call_fpe @ Thumb instruction -#if __LINUX_ARM_ARCH__ >= 7 +#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 +/* + * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms + * can never be supported in a single kernel, this code is not applicable at + * all when __LINUX_ARM_ARCH__ < 6. This allows simplifying assumptions to be + * made about .arch directives. + */ +#if __LINUX_ARM_ARCH__ < 7 +/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */ +#define NEED_CPU_ARCHITECTURE + ldr r5, .LCcpu_architecture + ldr r5, [r5] + cmp r5, #CPU_ARCH_ARMv7 + blo __und_usr_unknown +/* + * The following code won't get run unless the running CPU really is v7, so + * coding round the lack of ldrht on older arches is pointless. Temporarily + * override the assembler target arch with the minimum required instead: + */ + .arch armv6t2 +#endif 2: ARM( ldrht r5, [r4], #2 ) THUMB( ldrht r5, [r4] ) THUMB( add r4, r4, #2 ) - and r0, r5, #0xf800 @ mask bits 111x x... .... .... - cmp r0, #0xe800 @ 32bit instruction if xx != 0 + cmp r5, #0xe800 @ 32bit instruction if xx != 0 blo __und_usr_unknown 3: ldrht r0, [r4] add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 orr r0, r0, r5, lsl #16 + +#if __LINUX_ARM_ARCH__ < 7 +/* If the target arch was overridden, change it back: */ +#ifdef CONFIG_CPU_32v6K + .arch armv6k #else + .arch armv6 +#endif +#endif /* __LINUX_ARM_ARCH__ < 7 */ +#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */ b __und_usr_unknown #endif UNWIND(.fnend ) @@ -578,6 +606,12 @@ call_fpe: movw_pc lr @ CP#14 (Debug) movw_pc lr @ CP#15 (Control) +#ifdef NEED_CPU_ARCHITECTURE + .align 2 +.LCcpu_architecture: + .word __cpu_architecture +#endif + #ifdef CONFIG_NEON .align 6 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 742b6108a001..566c54c2a1fe 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -21,6 +21,7 @@ #include <asm/memory.h> #include <asm/thread_info.h> #include <asm/system.h> +#include <asm/pgtable.h> #ifdef CONFIG_DEBUG_LL #include <mach/debug-macro.S> @@ -38,11 +39,14 @@ #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif +#define PG_DIR_SIZE 0x4000 +#define PMD_ORDER 2 + .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 + .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE .macro pgtbl, rd, phys - add \rd, \phys, #TEXT_OFFSET - 0x4000 + add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE .endm #ifdef CONFIG_XIP_KERNEL @@ -95,7 +99,7 @@ ENTRY(stext) sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) add r8, r8, r4 @ PHYS_OFFSET #else - ldr r8, =PLAT_PHYS_OFFSET + ldr r8, =PHYS_OFFSET @ always constant in this case #endif /* @@ -148,11 +152,11 @@ __create_page_tables: pgtbl r4, r8 @ page table address /* - * Clear the 16K level 1 swapper page table + * Clear the swapper page table */ mov r0, r4 mov r3, #0 - add r6, r0, #0x4000 + add r6, r0, #PG_DIR_SIZE 1: str r3, [r0], #4 str r3, [r0], #4 str r3, [r0], #4 @@ -171,30 +175,30 @@ __create_page_tables: sub r0, r0, r3 @ virt->phys offset add r5, r5, r0 @ phys __enable_mmu add r6, r6, r0 @ phys __enable_mmu_end - mov r5, r5, lsr #20 - mov r6, r6, lsr #20 + mov r5, r5, lsr #SECTION_SHIFT + mov r6, r6, lsr #SECTION_SHIFT -1: orr r3, r7, r5, lsl #20 @ flags + kernel base - str r3, [r4, r5, lsl #2] @ identity mapping - teq r5, r6 - addne r5, r5, #1 @ next section - bne 1b +1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base + str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping + cmp r5, r6 + addlo r5, r5, #1 @ next section + blo 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ mov r3, pc - mov r3, r3, lsr #20 - orr r3, r7, r3, lsl #20 - add r0, r4, #(KERNEL_START & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! ldr r6, =(KERNEL_END - 1) - add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r0, r0, #1 << PMD_ORDER + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 - add r3, r3, #1 << 20 - strls r3, [r0], #4 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER bls 1b #ifdef CONFIG_XIP_KERNEL @@ -203,11 +207,11 @@ __create_page_tables: */ add r3, r8, #TEXT_OFFSET orr r3, r3, r7 - add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]! + add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]! ldr r6, =(_end - 1) add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 add r3, r3, #1 << 20 strls r3, [r0], #4 @@ -218,12 +222,12 @@ __create_page_tables: * Then map boot params address in r2 or * the first 1MB of ram if boot params address is not specified. */ - mov r0, r2, lsr #20 - movs r0, r0, lsl #20 + mov r0, r2, lsr #SECTION_SHIFT + movs r0, r0, lsl #SECTION_SHIFT moveq r0, r8 sub r3, r0, r8 add r3, r3, #PAGE_OFFSET - add r3, r4, r3, lsr #18 + add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orr r6, r7, r0 str r6, [r3] @@ -234,23 +238,23 @@ __create_page_tables: * This allows debug messages to be output * via a serial console before paging_init. */ - addruart r7, r3 + addruart r7, r3, r0 - mov r3, r3, lsr #20 - mov r3, r3, lsl #2 + mov r3, r3, lsr #SECTION_SHIFT + mov r3, r3, lsl #PMD_ORDER add r0, r4, r3 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long) cmp r3, #0x0800 @ limit to 512MB movhi r3, #0x0800 add r6, r0, r3 - mov r3, r7, lsr #20 + mov r3, r7, lsr #SECTION_SHIFT ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags - orr r3, r7, r3, lsl #20 + orr r3, r7, r3, lsl #SECTION_SHIFT 1: str r3, [r0], #4 - add r3, r3, #1 << 20 - teq r0, r6 - bne 1b + add r3, r3, #1 << SECTION_SHIFT + cmp r0, r6 + blo 1b #else /* CONFIG_DEBUG_ICEDCC */ /* we don't need any serial debugging mappings for ICEDCC */ @@ -262,7 +266,7 @@ __create_page_tables: * If we're using the NetWinder or CATS, we also need to map * in the 16550-type serial port for the debug messages */ - add r0, r4, #0xff000000 >> 18 + add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x7c000000 str r3, [r0] #endif @@ -272,10 +276,10 @@ __create_page_tables: * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x02000000 >> 18 + add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0xd8000000 >> 18 + add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER) str r3, [r0] #endif #endif @@ -488,13 +492,8 @@ __fixup_pv_table: add r5, r5, r3 @ adjust table end address add r7, r7, r3 @ adjust __pv_phys_offset address str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset -#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned -#else - mov r6, r3, lsr #16 @ constant for add/sub instructions - teq r3, r6, lsl #16 @ must be 64kiB aligned -#endif THUMB( it ne @ cross section branch ) bne __error str r6, [r7, #4] @ save to __pv_offset @@ -510,20 +509,8 @@ ENDPROC(__fixup_pv_table) .text __fixup_a_pv_table: #ifdef CONFIG_THUMB2_KERNEL -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - lsls r0, r6, #24 - lsr r6, #8 - beq 1f - clz r7, r0 - lsr r0, #24 - lsl r0, r7 - bic r0, 0x0080 - lsrs r7, #1 - orrcs r0, #0x0080 - orr r0, r0, r7, lsl #12 -#endif -1: lsls r6, #24 - beq 4f + lsls r6, #24 + beq 2f clz r7, r6 lsr r6, #24 lsl r6, r7 @@ -532,43 +519,25 @@ __fixup_a_pv_table: orrcs r6, #0x0080 orr r6, r6, r7, lsl #12 orr r6, #0x4000 - b 4f -2: @ at this point the C flag is always clear - add r7, r3 -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - ldrh ip, [r7] - tst ip, 0x0400 @ the i bit tells us LS or MS byte - beq 3f - cmp r0, #0 @ set C flag, and ... - biceq ip, 0x0400 @ immediate zero value has a special encoding - streqh ip, [r7] @ that requires the i bit cleared -#endif -3: ldrh ip, [r7, #2] + b 2f +1: add r7, r3 + ldrh ip, [r7, #2] and ip, 0x8f00 - orrcc ip, r6 @ mask in offset bits 31-24 - orrcs ip, r0 @ mask in offset bits 23-16 + orr ip, r6 @ mask in offset bits 31-24 strh ip, [r7, #2] -4: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b bx lr #else -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - and r0, r6, #255 @ offset bits 23-16 - mov r6, r6, lsr #8 @ offset bits 31-24 -#else - mov r0, #0 @ just in case... -#endif - b 3f -2: ldr ip, [r7, r3] + b 2f +1: ldr ip, [r7, r3] bic ip, ip, #0x000000ff - tst ip, #0x400 @ rotate shift tells us LS or MS byte - orrne ip, ip, r6 @ mask in offset bits 31-24 - orreq ip, ip, r0 @ mask in offset bits 23-16 + orr ip, ip, r6 @ mask in offset bits 31-24 str ip, [r7, r3] -3: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b mov pc, lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index a927ca1f5566..814a52a9dc39 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -45,7 +45,6 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); /* Number of BRP/WRP registers on this CPU. */ static int core_num_brps; -static int core_num_reserved_brps; static int core_num_wrps; /* Debug architecture version. */ @@ -137,10 +136,11 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), - "CPUID feature registers not supported. " - "Assuming v6 debug is present.\n")) + if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { + pr_warning("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); return ARM_DEBUG_ARCH_V6; + } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -154,10 +154,21 @@ u8 arch_get_debug_arch(void) static int debug_arch_supported(void) { u8 arch = get_debug_arch(); - return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; + + /* We don't support the memory-mapped interface. */ + return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) || + arch >= ARM_DEBUG_ARCH_V7_1; +} + +/* Determine number of WRP registers available. */ +static int get_num_wrp_resources(void) +{ + u32 didr; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 28) & 0xf) + 1; } -/* Determine number of BRP register available. */ +/* Determine number of BRP registers available. */ static int get_num_brp_resources(void) { u32 didr; @@ -176,9 +187,10 @@ static int core_has_mismatch_brps(void) static int get_num_wrps(void) { /* - * FIXME: When a watchpoint fires, the only way to work out which - * watchpoint it was is by disassembling the faulting instruction - * and working out the address of the memory access. + * On debug architectures prior to 7.1, when a watchpoint fires, the + * only way to work out which watchpoint it was is by disassembling + * the faulting instruction and working out the address of the memory + * access. * * Furthermore, we can only do this if the watchpoint was precise * since imprecise watchpoints prevent us from calculating register @@ -192,36 +204,17 @@ static int get_num_wrps(void) * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows * that it is set on some implementations]. */ + if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1) + return 1; -#if 0 - int wrps; - u32 didr; - ARM_DBG_READ(c0, 0, didr); - wrps = ((didr >> 28) & 0xf) + 1; -#endif - int wrps = 1; - - if (core_has_mismatch_brps() && wrps >= get_num_brp_resources()) - wrps = get_num_brp_resources() - 1; - - return wrps; -} - -/* We reserve one breakpoint for each watchpoint. */ -static int get_num_reserved_brps(void) -{ - if (core_has_mismatch_brps()) - return get_num_wrps(); - return 0; + return get_num_wrp_resources(); } /* Determine number of usable BRPs available. */ static int get_num_brps(void) { int brps = get_num_brp_resources(); - if (core_has_mismatch_brps()) - brps -= get_num_reserved_brps(); - return brps; + return core_has_mismatch_brps() ? brps - 1 : brps; } /* @@ -239,7 +232,7 @@ static int enable_monitor_mode(void) /* Ensure that halting mode is disabled. */ if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, - "halting debug mode enabled. Unable to access hardware resources.\n")) { + "halting debug mode enabled. Unable to access hardware resources.\n")) { ret = -EPERM; goto out; } @@ -255,6 +248,7 @@ static int enable_monitor_mode(void) ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); break; case ARM_DEBUG_ARCH_V7_ECP14: + case ARM_DEBUG_ARCH_V7_1: ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); break; default: @@ -346,24 +340,10 @@ int arch_install_hw_breakpoint(struct perf_event *bp) val_base = ARM_BASE_BVR; slots = (struct perf_event **)__get_cpu_var(bp_on_reg); max_slots = core_num_brps; - if (info->step_ctrl.enabled) { - /* Override the breakpoint data with the step data. */ - addr = info->trigger & ~0x3; - ctrl = encode_ctrl_reg(info->step_ctrl); - } } else { /* Watchpoint */ - if (info->step_ctrl.enabled) { - /* Install into the reserved breakpoint region. */ - ctrl_base = ARM_BASE_BCR + core_num_brps; - val_base = ARM_BASE_BVR + core_num_brps; - /* Override the watchpoint data with the step data. */ - addr = info->trigger & ~0x3; - ctrl = encode_ctrl_reg(info->step_ctrl); - } else { - ctrl_base = ARM_BASE_WCR; - val_base = ARM_BASE_WVR; - } + ctrl_base = ARM_BASE_WCR; + val_base = ARM_BASE_WVR; slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -382,6 +362,17 @@ int arch_install_hw_breakpoint(struct perf_event *bp) goto out; } + /* Override the breakpoint data with the step data. */ + if (info->step_ctrl.enabled) { + addr = info->trigger & ~0x3; + ctrl = encode_ctrl_reg(info->step_ctrl); + if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) { + i = 0; + ctrl_base = ARM_BASE_BCR + core_num_brps; + val_base = ARM_BASE_BVR + core_num_brps; + } + } + /* Setup the address register. */ write_wb_reg(val_base + i, addr); @@ -405,10 +396,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) max_slots = core_num_brps; } else { /* Watchpoint */ - if (info->step_ctrl.enabled) - base = ARM_BASE_BCR + core_num_brps; - else - base = ARM_BASE_WCR; + base = ARM_BASE_WCR; slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -426,6 +414,13 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) return; + /* Ensure that we disable the mismatch breakpoint. */ + if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE && + info->step_ctrl.enabled) { + i = 0; + base = ARM_BASE_BCR + core_num_brps; + } + /* Reset the control register. */ write_wb_reg(base + i, 0); } @@ -632,10 +627,9 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) * we can use the mismatch feature as a poor-man's hardware * single-step, but this only works for per-task breakpoints. */ - if (WARN_ONCE(!bp->overflow_handler && - (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps() - || !bp->hw.bp_target), - "overflow handler required but none found\n")) { + if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || + !core_has_mismatch_brps() || !bp->hw.bp_target)) { + pr_warning("overflow handler required but none found\n"); ret = -EINVAL; } out: @@ -666,34 +660,62 @@ static void disable_single_step(struct perf_event *bp) arch_install_hw_breakpoint(bp); } -static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) +static void watchpoint_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) { - int i; + int i, access; + u32 val, ctrl_reg, alignment_mask; struct perf_event *wp, **slots; struct arch_hw_breakpoint *info; + struct arch_hw_breakpoint_ctrl ctrl; slots = (struct perf_event **)__get_cpu_var(wp_on_reg); - /* Without a disassembler, we can only handle 1 watchpoint. */ - BUG_ON(core_num_wrps > 1); - for (i = 0; i < core_num_wrps; ++i) { rcu_read_lock(); wp = slots[i]; - if (wp == NULL) { - rcu_read_unlock(); - continue; - } + if (wp == NULL) + goto unlock; + info = counter_arch_bp(wp); /* - * The DFAR is an unknown value. Since we only allow a - * single watchpoint, we can set the trigger to the lowest - * possible faulting address. + * The DFAR is an unknown value on debug architectures prior + * to 7.1. Since we only allow a single watchpoint on these + * older CPUs, we can set the trigger to the lowest possible + * faulting address. */ - info = counter_arch_bp(wp); - info->trigger = wp->attr.bp_addr; + if (debug_arch < ARM_DEBUG_ARCH_V7_1) { + BUG_ON(i > 0); + info->trigger = wp->attr.bp_addr; + } else { + if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) + alignment_mask = 0x7; + else + alignment_mask = 0x3; + + /* Check if the watchpoint value matches. */ + val = read_wb_reg(ARM_BASE_WVR + i); + if (val != (addr & ~alignment_mask)) + goto unlock; + + /* Possible match, check the byte address select. */ + ctrl_reg = read_wb_reg(ARM_BASE_WCR + i); + decode_ctrl_reg(ctrl_reg, &ctrl); + if (!((1 << (addr & alignment_mask)) & ctrl.len)) + goto unlock; + + /* Check that the access type matches. */ + access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : + HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + + /* We have a winner. */ + info->trigger = addr; + } + pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); perf_bp_event(wp, regs); @@ -705,6 +727,7 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) if (!wp->overflow_handler) enable_single_step(wp, instruction_pointer(regs)); +unlock: rcu_read_unlock(); } } @@ -717,7 +740,7 @@ static void watchpoint_single_step_handler(unsigned long pc) slots = (struct perf_event **)__get_cpu_var(wp_on_reg); - for (i = 0; i < core_num_reserved_brps; ++i) { + for (i = 0; i < core_num_wrps; ++i) { rcu_read_lock(); wp = slots[i]; @@ -820,7 +843,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, case ARM_ENTRY_ASYNC_WATCHPOINT: WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); case ARM_ENTRY_SYNC_WATCHPOINT: - watchpoint_handler(addr, regs); + watchpoint_handler(addr, fsr, regs); break; default: ret = 1; /* Unhandled fault. */ @@ -834,11 +857,31 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, /* * One-time initialisation. */ -static void reset_ctrl_regs(void *info) +static cpumask_t debug_err_mask; + +static int debug_reg_trap(struct pt_regs *regs, unsigned int instr) { - int i, cpu = smp_processor_id(); + int cpu = smp_processor_id(); + + pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n", + instr, cpu); + + /* Set the error flag for this CPU and skip the faulting instruction. */ + cpumask_set_cpu(cpu, &debug_err_mask); + instruction_pointer(regs) += 4; + return 0; +} + +static struct undef_hook debug_reg_hook = { + .instr_mask = 0x0fe80f10, + .instr_val = 0x0e000e10, + .fn = debug_reg_trap, +}; + +static void reset_ctrl_regs(void *unused) +{ + int i, raw_num_brps, err = 0, cpu = smp_processor_id(); u32 dbg_power; - cpumask_t *cpumask = info; /* * v7 debug contains save and restore registers so that debug state @@ -848,38 +891,57 @@ static void reset_ctrl_regs(void *info) * Access Register to avoid taking undefined instruction exceptions * later on. */ - if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { + switch (debug_arch) { + case ARM_DEBUG_ARCH_V6: + case ARM_DEBUG_ARCH_V6_1: + /* ARMv6 cores just need to reset the registers. */ + goto reset_regs; + case ARM_DEBUG_ARCH_V7_ECP14: /* * Ensure sticky power-down is clear (i.e. debug logic is * powered up). */ asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 0) { - pr_warning("CPU %d debug is powered down!\n", cpu); - cpumask_or(cpumask, cpumask, cpumask_of(cpu)); - return; - } - + if ((dbg_power & 0x1) == 0) + err = -EPERM; + break; + case ARM_DEBUG_ARCH_V7_1: /* - * Unconditionally clear the lock by writing a value - * other than 0xC5ACCE55 to the access register. + * Ensure the OS double lock is clear. */ - asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); - isb(); + asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power)); + if ((dbg_power & 0x1) == 1) + err = -EPERM; + break; + } - /* - * Clear any configured vector-catch events before - * enabling monitor mode. - */ - asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); - isb(); + if (err) { + pr_warning("CPU %d debug is powered down!\n", cpu); + cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); + return; } + /* + * Unconditionally clear the lock by writing a value + * other than 0xC5ACCE55 to the access register. + */ + asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + isb(); + + /* + * Clear any configured vector-catch events before + * enabling monitor mode. + */ + asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); + isb(); + +reset_regs: if (enable_monitor_mode()) return; /* We must also reset any reserved registers. */ - for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) { + raw_num_brps = get_num_brp_resources(); + for (i = 0; i < raw_num_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); write_wb_reg(ARM_BASE_BVR + i, 0UL); } @@ -895,6 +957,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self, { if (action == CPU_ONLINE) smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1); + return NOTIFY_OK; } @@ -905,7 +968,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { static int __init arch_hw_breakpoint_init(void) { u32 dscr; - cpumask_t cpumask = { CPU_BITS_NONE }; debug_arch = get_debug_arch(); @@ -916,28 +978,31 @@ static int __init arch_hw_breakpoint_init(void) /* Determine how many BRPs/WRPs are available. */ core_num_brps = get_num_brps(); - core_num_reserved_brps = get_num_reserved_brps(); core_num_wrps = get_num_wrps(); - pr_info("found %d breakpoint and %d watchpoint registers.\n", - core_num_brps + core_num_reserved_brps, core_num_wrps); - - if (core_num_reserved_brps) - pr_info("%d breakpoint(s) reserved for watchpoint " - "single-step.\n", core_num_reserved_brps); + /* + * We need to tread carefully here because DBGSWENABLE may be + * driven low on this core and there isn't an architected way to + * determine that. + */ + register_undef_hook(&debug_reg_hook); /* * Reset the breakpoint resources. We assume that a halting * debugger will leave the world in a nice state for us. */ - on_each_cpu(reset_ctrl_regs, &cpumask, 1); - if (!cpumask_empty(&cpumask)) { + on_each_cpu(reset_ctrl_regs, NULL, 1); + unregister_undef_hook(&debug_reg_hook); + if (!cpumask_empty(&debug_err_mask)) { core_num_brps = 0; - core_num_reserved_brps = 0; core_num_wrps = 0; return 0; } + pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n", + core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " : + "", core_num_wrps); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { max_watchpoint_len = 4; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index de3dcab8610b..7cb29261249a 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -35,8 +35,8 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> -#include <linux/ftrace.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -59,9 +59,6 @@ int arch_show_interrupts(struct seq_file *p, int prec) #ifdef CONFIG_SMP show_ipi_list(p, prec); #endif -#ifdef CONFIG_LOCAL_TIMERS - show_local_irqs(p, prec); -#endif seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); return 0; } diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c index 79203ee1d039..9fe8910308af 100644 --- a/arch/arm/kernel/kprobes-arm.c +++ b/arch/arm/kernel/kprobes-arm.c @@ -60,6 +60,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> +#include <linux/module.h> #include "kprobes.h" @@ -971,6 +972,9 @@ const union decode_item kprobe_decode_arm_table[] = { DECODE_END }; +#ifdef CONFIG_ARM_KPROBES_TEST_MODULE +EXPORT_SYMBOL_GPL(kprobe_decode_arm_table); +#endif static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c new file mode 100644 index 000000000000..fc82de8bdcce --- /dev/null +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -0,0 +1,1323 @@ +/* + * arch/arm/kernel/kprobes-test-arm.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "kprobes-test.h" + + +#define TEST_ISA "32" + +#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_REG(14, 99f) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code1 #reg code2" \n\t" \ + " bx lr \n\t" \ + ".thumb \n\t" \ + "3: adr lr, 2f \n\t" \ + " bx lr \n\t" \ + ".arm \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + +#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_PTR(reg, val) \ + TEST_ARG_REG(14, 99f) \ + TEST_ARG_MEM(15, 3f+1) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code1 #reg code2" \n\t" \ + " bx lr \n\t" \ + ".thumb \n\t" \ + "3: adr lr, 2f \n\t" \ + " bx lr \n\t" \ + ".arm \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + + +void kprobe_arm_test_cases(void) +{ + kprobe_test_flags = 0; + + TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)") + +#define _DATA_PROCESSING_DNM(op,s,val) \ + TEST_RR( op "eq" s " r0, r",1, VAL1,", r",2, val, "") \ + TEST_RR( op "ne" s " r1, r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR( op "cs" s " r2, r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR( op "cc" s " r3, r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR( op "mi" s " r4, r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR( op "pl" s " r5, r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR( op "vs" s " r6, r",7, VAL1,", r",2, val, ", rrx") \ + TEST_R( op "vc" s " r6, r",7, VAL1,", pc, lsl #3") \ + TEST_R( op "vc" s " r6, r",7, VAL1,", sp, lsr #4") \ + TEST_R( op "vc" s " r6, pc, r",7, VAL1,", asr #5") \ + TEST_R( op "vc" s " r6, sp, r",7, VAL1,", ror #6") \ + TEST_RRR( op "hi" s " r8, r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\ + TEST_RRR( op "ls" s " r9, r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\ + TEST_RRR( op "ge" s " r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\ + TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ + TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ + TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ + TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ + TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ + TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ + TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ + TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ + TEST( op s " r4, pc" ", #0x00005a00") + +#define DATA_PROCESSING_DNM(op,val) \ + _DATA_PROCESSING_DNM(op,"",val) \ + _DATA_PROCESSING_DNM(op,"s",val) + +#define DATA_PROCESSING_NM(op,val) \ + TEST_RR( op "ne r",1, VAL1,", r",2, val, "") \ + TEST_RR( op "eq r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR( op "cc r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR( op "cs r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR( op "pl r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR( op "mi r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR( op "vc r",7, VAL1,", r",2, val, ", rrx") \ + TEST_R ( op "vs r",7, VAL1,", pc, lsl #3") \ + TEST_R ( op "vs r",7, VAL1,", sp, lsr #4") \ + TEST_R( op "vs pc, r",7, VAL1,", asr #5") \ + TEST_R( op "vs sp, r",7, VAL1,", ror #6") \ + TEST_RRR( op "ls r",9, VAL1,", r",14,val, ", lsl r",0, 3,"") \ + TEST_RRR( op "hi r",9, VAL1,", r",14,val, ", lsr r",7, 4,"") \ + TEST_RRR( op "lt r",11,VAL1,", r",14,val, ", asr r",7, 5,"") \ + TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ + TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ + TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ + TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ + TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ + TEST_R( op "eq r",11,VAL1,", #0xf5") \ + TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ + TEST_R( op " r",8, VAL2,", #0x000af000") + +#define _DATA_PROCESSING_DM(op,s,val) \ + TEST_R( op "eq" s " r0, r",1, val, "") \ + TEST_R( op "ne" s " r1, r",1, val, ", lsl #3") \ + TEST_R( op "cs" s " r2, r",3, val, ", lsr #4") \ + TEST_R( op "cc" s " r3, r",3, val, ", asr #5") \ + TEST_R( op "mi" s " r4, r",5, N(val),", asr #6") \ + TEST_R( op "pl" s " r5, r",5, val, ", ror #7") \ + TEST_R( op "vs" s " r6, r",10,val, ", rrx") \ + TEST( op "vs" s " r7, pc, lsl #3") \ + TEST( op "vs" s " r7, sp, lsr #4") \ + TEST_RR( op "vc" s " r8, r",7, val, ", lsl r",0, 3,"") \ + TEST_RR( op "hi" s " r9, r",9, val, ", lsr r",7, 4,"") \ + TEST_RR( op "ls" s " r10, r",9, val, ", asr r",7, 5,"") \ + TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ + TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ + TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ + TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ + TEST( op "eq" s " r0, #0xf5") \ + TEST( op "ne" s " r11, #0xf5000000") \ + TEST( op s " r7, #0x000af000") \ + TEST( op s " r4, #0x00005a00") + +#define DATA_PROCESSING_DM(op,val) \ + _DATA_PROCESSING_DM(op,"",val) \ + _DATA_PROCESSING_DM(op,"s",val) + + DATA_PROCESSING_DNM("and",0xf00f00ff) + DATA_PROCESSING_DNM("eor",0xf00f00ff) + DATA_PROCESSING_DNM("sub",VAL2) + DATA_PROCESSING_DNM("rsb",VAL2) + DATA_PROCESSING_DNM("add",VAL2) + DATA_PROCESSING_DNM("adc",VAL2) + DATA_PROCESSING_DNM("sbc",VAL2) + DATA_PROCESSING_DNM("rsc",VAL2) + DATA_PROCESSING_NM("tst",0xf00f00ff) + DATA_PROCESSING_NM("teq",0xf00f00ff) + DATA_PROCESSING_NM("cmp",VAL2) + DATA_PROCESSING_NM("cmn",VAL2) + DATA_PROCESSING_DNM("orr",0xf00f00ff) + DATA_PROCESSING_DM("mov",VAL2) + DATA_PROCESSING_DNM("bic",0xf00f00ff) + DATA_PROCESSING_DM("mvn",VAL2) + + TEST("mov ip, sp") /* This has special case emulation code */ + + TEST_SUPPORTED("mov pc, #0x1000"); + TEST_SUPPORTED("mov sp, #0x1000"); + TEST_SUPPORTED("cmp pc, #0x1000"); + TEST_SUPPORTED("cmp sp, #0x1000"); + + /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc") + TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc") + TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc") + + /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED("movs pc, r1") + TEST_UNSUPPORTED("movs pc, r1, lsl r2") + TEST_UNSUPPORTED("movs pc, #0x10000") + TEST_UNSUPPORTED("adds pc, lr, r1") + TEST_UNSUPPORTED("adds pc, lr, r1, lsl r2") + TEST_UNSUPPORTED("adds pc, lr, #4") + + /* Data-processing with SP as target */ + TEST("add sp, sp, #16") + TEST("sub sp, sp, #8") + TEST("bic sp, sp, #0x20") + TEST("orr sp, sp, #0x20") + TEST_PR( "add sp, r",10,0,", r",11,4,"") + TEST_PRR("add sp, r",10,0,", r",11,4,", asl r",12,1,"") + TEST_P( "mov sp, r",10,0,"") + TEST_PR( "mov sp, r",10,0,", asl r",12,0,"") + + /* Data-processing with PC as target */ + TEST_BF( "add pc, pc, #2f-1b-8") + TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") + TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") + TEST_BF_R ("mov pc, r",0,2f,"") + TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BB( "sub pc, pc, #1b-2b+8") +#if __LINUX_ARM_ARCH__ >= 6 + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#endif + TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") + TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") + TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") +#ifdef CONFIG_THUMB2_KERNEL + TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") + TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") +#endif + TEST_GROUP("Miscellaneous instructions") + + TEST("mrs r0, cpsr") + TEST("mrspl r7, cpsr") + TEST("mrs r14, cpsr") + TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr") + TEST_UNSUPPORTED("mrs r0, spsr") + TEST_UNSUPPORTED("mrs lr, spsr") + + TEST_UNSUPPORTED("msr cpsr, r0") + TEST_UNSUPPORTED("msr cpsr_f, lr") + TEST_UNSUPPORTED("msr spsr, r0") + + TEST_BF_R("bx r",0,2f,"") + TEST_BB_R("bx r",7,2f,"") + TEST_BF_R("bxeq r",14,2f,"") + + TEST_R("clz r0, r",0, 0x0,"") + TEST_R("clzeq r7, r",14,0x1,"") + TEST_R("clz lr, r",7, 0xffffffff,"") + TEST( "clz r4, sp") + TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0") + TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("bxj r0") +#endif + + TEST_BF_R("blx r",0,2f,"") + TEST_BB_R("blx r",7,2f,"") + TEST_BF_R("blxeq r",14,2f,"") + TEST_UNSUPPORTED(".word 0x0120003f @ blx pc") + + TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qadd lr, r",9, VAL2,", r13") + TEST_RR( "qsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qsubvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qsub lr, r",9, VAL2,", r13") + TEST_RR( "qdadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qdaddvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qdadd lr, r",9, VAL2,", r13") + TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qdsub lr, r",9, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc") + TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1") + + TEST_UNSUPPORTED("bkpt 0xffff") + TEST_UNSUPPORTED("bkpt 0x0000") + + TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0") + + TEST_GROUP("Halfword multiply and multiply-accumulate") + + TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3") + TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3") + TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3") + TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3") + + TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3") + TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc") + + TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulwb lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2") + TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulwt lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2") + + TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3") + TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3") + TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3") + TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc") + + TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulbb lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2") + TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smultb lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2") + TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulbt lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2") + TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smultt lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2") + TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2") + TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc") + + TEST_GROUP("Multiply and multiply-accumulate") + + TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"") + TEST_R( "mul lr, r",4, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2") + TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2") + TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc") + TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"") + TEST_R( "muls lr, r",4, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2") + + TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3") + TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "umaal lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe0500090 @ undef") + TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") + + TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc") +#endif + + TEST_UNSUPPORTED(".word 0xe0700090 @ undef") + TEST_UNSUPPORTED(".word 0xe07fff9f @ undef") + + TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "umull lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3") + TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "umulls lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3") + + TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3") + TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3") + + TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "smull lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3") + TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "smulls lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3") + + TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3") + TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc") + + TEST_GROUP("Synchronization primitives") + + /* + * Use hard coded constants for SWP instructions to avoid warnings + * about deprecated instructions. + */ + TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]") + TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]") + TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]") + TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]") + TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]") + TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]") + TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]") + + TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("ldrex r2, [sp]") + TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") + TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") + TEST_UNSUPPORTED("strexb r0, r2, [sp]") + TEST_UNSUPPORTED("ldrexb r2, [sp]") + TEST_UNSUPPORTED("strexh r0, r2, [sp]") + TEST_UNSUPPORTED("ldrexh r2, [sp]") +#endif + TEST_GROUP("Extra load/store instructions") + + TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") + TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]") + TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") + TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!") + TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"") + TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11") + TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc") + + TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]") + TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]") + TEST_PR( "ldrh r1, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"") + TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11") + TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc") + + TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]") + TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]") + TEST_RP( "strh r",1, VAL1,", [r",2, 24,", #4]!") + TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!") + TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48") + TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48") + TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48") + + TEST_P( "ldrh r0, [r",0, 24,", #-2]") + TEST_P( "ldrvsh r14, [r",13,0, ", #2]") + TEST_P( "ldrh r1, [r",2, 24,", #4]!") + TEST_P( "ldrvch r12, [r",11,24,", #-4]!") + TEST_P( "ldrh r2, [r",3, 24,"], #48") + TEST_P( "ldrh r10, [r",9, 64,"], #-48") + TEST( "ldrh r0, [pc, #0]") + TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48") + + TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]") + TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]") + TEST_PR( "ldrsb r1, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"") + TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11") + + TEST_P( "ldrsb r0, [r",0, 24,", #-1]") + TEST_P( "ldrgesb r14, [r",13,0, ", #1]") + TEST_P( "ldrsb r1, [r",2, 24,", #4]!") + TEST_P( "ldrltsb r12, [r",11,24,", #-4]!") + TEST_P( "ldrsb r2, [r",3, 24,"], #48") + TEST_P( "ldrsb r10, [r",9, 64,"], #-48") + TEST( "ldrsb r0, [pc, #0]") + TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48") + + TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]") + TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]") + TEST_PR( "ldrsh r1, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"") + TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11") + + TEST_P( "ldrsh r0, [r",0, 24,", #-1]") + TEST_P( "ldreqsh r14, [r",13,0 ,", #1]") + TEST_P( "ldrsh r1, [r",2, 24,", #4]!") + TEST_P( "ldrnesh r12, [r",11,24,", #-4]!") + TEST_P( "ldrsh r2, [r",3, 24,"], #48") + TEST_P( "ldrsh r10, [r",9, 64,"], #-48") + TEST( "ldrsh r0, [pc, #0]") + TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_UNSUPPORTED("strht r1, [r2], r3") + TEST_UNSUPPORTED("ldrht r1, [r2], r3") + TEST_UNSUPPORTED("strht r1, [r2], #48") + TEST_UNSUPPORTED("ldrht r1, [r2], #48") + TEST_UNSUPPORTED("ldrsbt r1, [r2], r3") + TEST_UNSUPPORTED("ldrsbt r1, [r2], #48") + TEST_UNSUPPORTED("ldrsht r1, [r2], r3") + TEST_UNSUPPORTED("ldrsht r1, [r2], #48") +#endif + + TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") + TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") + TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") + TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!") + TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"") + TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"") + TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!") + + TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]") + TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]") + TEST_PR( "ldrd r4, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"") + TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"") + TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11") + TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11") + TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc") + + TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]") + TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]") + TEST_RP( "strd r",4, VAL1,", [r",2, 24,", #16]!") + TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!") + TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48") + TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48") + TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!") + + TEST_P( "ldrd r0, [r",0, 24,", #-8]") + TEST_P( "ldrhid r8, [r",13,0, ", #8]") + TEST_P( "ldrd r4, [r",2, 24,", #16]!") + TEST_P( "ldrlsd r6, [r",11,24,", #-16]!") + TEST_P( "ldrd r2, [r",5, 24,"], #48") + TEST_P( "ldrd r10, [r",9,6,"], #-48") + TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48") + TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48") + + TEST_GROUP("Miscellaneous") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST("movw r0, #0") + TEST("movw r0, #0xffff") + TEST("movw lr, #0xffff") + TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0") + TEST_R("movt r",0, VAL1,", #0") + TEST_R("movt r",0, VAL2,", #0xffff") + TEST_R("movt r",14,VAL1,", #0xffff") + TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0") +#endif + + TEST_UNSUPPORTED("msr cpsr, 0x13") + TEST_UNSUPPORTED("msr cpsr_f, 0xf0000000") + TEST_UNSUPPORTED("msr spsr, 0x13") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_SUPPORTED("yield") + TEST("sev") + TEST("nop") + TEST("wfi") + TEST_SUPPORTED("wfe") + TEST_UNSUPPORTED("dbg #0") +#endif + + TEST_GROUP("Load/store word and unsigned byte") + +#define LOAD_STORE(byte) \ + TEST_RP( "str"byte" r",0, VAL1,", [r",1, 24,", #-2]") \ + TEST_RP( "str"byte" r",14,VAL2,", [r",13,0, ", #2]") \ + TEST_RP( "str"byte" r",1, VAL1,", [r",2, 24,", #4]!") \ + TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \ + TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \ + TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \ + TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \ + TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \ + TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \ + TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \ + TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \ + TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \ + TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\ + TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\ + TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\ + TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\ + TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \ + TEST_P( "ldr"byte" r14, [r",13,0, ", #2]") \ + TEST_P( "ldr"byte" r1, [r",2, 24,", #4]!") \ + TEST_P( "ldr"byte" r12, [r",11,24,", #-4]!") \ + TEST_P( "ldr"byte" r2, [r",3, 24,"], #48") \ + TEST_P( "ldr"byte" r10, [r",9, 64,"], #-48") \ + TEST_PR( "ldr"byte" r0, [r",0, 48,", -r",2, 24,"]") \ + TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 48,"]") \ + TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 48,"]!") \ + TEST_PR( "ldr"byte" r12, [r",11,48,", -r",10,24,"]!") \ + TEST_PR( "ldr"byte" r2, [r",3, 24,"], r",4, 48,"") \ + TEST_PR( "ldr"byte" r10, [r",9, 48,"], -r",11,24,"") \ + TEST_PR( "ldr"byte" r0, [r",0, 24,", r",2, 32,", asl #1]") \ + TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 32,", lsr #2]") \ + TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 32,", asr #3]!") \ + TEST_PR( "ldr"byte" r12, [r",11,24,", r",10, 4,", ror #31]!") \ + TEST( "ldr"byte" r0, [pc, #0]") \ + TEST_R( "ldr"byte" r12, [pc, r",14,0,"]") + + LOAD_STORE("") + TEST_P( "str pc, [r",0,0,", #15*4]") + TEST_R( "str pc, [sp, r",2,15*4,"]") + TEST_BF( "ldr pc, [sp, #15*4]") + TEST_BF_R("ldr pc, [sp, r",2,15*4,"]") + + TEST_P( "str sp, [r",0,0,", #13*4]") + TEST_R( "str sp, [sp, r",2,13*4,"]") + TEST_BF( "ldr sp, [sp, #13*4]") + TEST_BF_R("ldr sp, [sp, r",2,13*4,"]") + +#ifdef CONFIG_THUMB2_KERNEL + TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]") +#endif + TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!") + TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!") + TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]") + TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]") + + LOAD_STORE("b") + TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!") + TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!") + TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!") + TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!") + + TEST_UNSUPPORTED("ldrt r0, [r1], #4") + TEST_UNSUPPORTED("ldrt r1, [r2], r3") + TEST_UNSUPPORTED("strt r2, [r3], #4") + TEST_UNSUPPORTED("strt r3, [r4], r5") + TEST_UNSUPPORTED("ldrbt r4, [r5], #4") + TEST_UNSUPPORTED("ldrbt r5, [r6], r7") + TEST_UNSUPPORTED("strbt r6, [r7], #4") + TEST_UNSUPPORTED("strbt r7, [r8], r9") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_GROUP("Parallel addition and subtraction, signed") + + TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */ + + TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10") + TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10") + TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10") + TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10") + TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */ + TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10") + + TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10") + TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10") + TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10") + TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10") + TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */ + TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10") + + TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10") + TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10") + TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10") + TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10") + TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */ + TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10") + + TEST_GROUP("Parallel addition and subtraction, unsigned") + + TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */ + + TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10") + TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10") + TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10") + TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10") + TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */ + TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10") + + TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10") + TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10") + TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10") + TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10") + TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */ + TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10") + + TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10") + TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10") + TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10") + TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10") + TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */ + TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10") + TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc") +#endif /* __LINUX_ARM_ARCH__ >= 7 */ + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_GROUP("Packing, unpacking, saturation, and reversal") + + TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2") + TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2") + TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2") + TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2") + TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2") + TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2") + TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */ + + TEST_R( "ssat r0, #24, r",0, VAL1,"") + TEST_R( "ssat r14, #24, r",12, VAL2,"") + TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12") + + TEST_R( "usat r0, #24, r",0, VAL1,"") + TEST_R( "usat r14, #24, r",12, VAL2,"") + TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "usat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12") + + TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb16 r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8") + + TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"") + TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10") + TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc") + + TEST_R( "ssat16 r0, #12, r",0, HH1,"") + TEST_R( "ssat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12") + + TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8") + + TEST_R( "rev r0, r",0, VAL1,"") + TEST_R( "rev r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12") + + TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxth r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8") + + TEST_R( "rev16 r0, r",0, VAL1,"") + TEST_R( "rev16 r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12") + + TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb16 r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8") + + TEST_R( "usat16 r0, #12, r",0, HH1,"") + TEST_R( "usat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12") + TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc") + + TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_R( "rbit r0, r",0, VAL1,"") + TEST_R( "rbit r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12") +#endif + + TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxth r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7") + TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc") + TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8") + TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8") + + TEST_R( "revsh r0, r",0, VAL1,"") + TEST_R( "revsh r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12") + TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc") + + TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */ + + TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */ +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_GROUP("Signed multiplies") + + TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8") + TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8") + + TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10") + TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10") + + TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8") + TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8") + + TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10") + TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10") + + TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8") + TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8") + TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8") + TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc") + + TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8") + TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8") + + TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8") + TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8") + + TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"") + TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10") + TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"") + TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10") + + TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8") + TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8") + TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8") + TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8") + TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc") + + TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"") + TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10") + TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc") + + TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"") + TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"") + TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8") + TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8") + TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8") +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_GROUP("Bit Field") + + TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16") + TEST_R( "sbfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16") + + TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16") + TEST_R( "ubfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16") + TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16") + + TEST_R( "bfc r",0, VAL1,", #4, #20") + TEST_R( "bfcvs r",14,VAL2,", #4, #20") + TEST_R( "bfc r",7, VAL1,", #0, #31") + TEST_R( "bfc r",8, VAL2,", #0, #31") + TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31"); + + TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31") + TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20") + TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20") + + TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */ + TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */ +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + + TEST_GROUP("Branch, branch with link, and block data transfer") + + TEST_P( "stmda r",0, 16*4,", {r0}") + TEST_P( "stmeqda r",4, 16*4,", {r0-r15}") + TEST_P( "stmneda r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmda r",13,0, "!, {pc}") + + TEST_P( "ldmda r",0, 16*4,", {r0}") + TEST_BF_P("ldmcsda r",4, 15*4,", {r0-r15}") + TEST_BF_P("ldmccda r",7, 15*4,"!, {r8-r15}") + TEST_P( "ldmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmda r",14,15*4,"!, {pc}") + + TEST_P( "stmia r",0, 16*4,", {r0}") + TEST_P( "stmmiia r",4, 16*4,", {r0-r15}") + TEST_P( "stmplia r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmia r",14,0, "!, {pc}") + + TEST_P( "ldmia r",0, 16*4,", {r0}") + TEST_BF_P("ldmvsia r",4, 0, ", {r0-r15}") + TEST_BF_P("ldmvcia r",7, 8*4, "!, {r8-r15}") + TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmia r",14,15*4,"!, {pc}") + + TEST_P( "stmdb r",0, 16*4,", {r0}") + TEST_P( "stmhidb r",4, 16*4,", {r0-r15}") + TEST_P( "stmlsdb r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmdb r",13,4, "!, {pc}") + + TEST_P( "ldmdb r",0, 16*4,", {r0}") + TEST_BF_P("ldmgedb r",4, 16*4,", {r0-r15}") + TEST_BF_P("ldmltdb r",7, 16*4,"!, {r8-r15}") + TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmdb r",14,16*4,"!, {pc}") + + TEST_P( "stmib r",0, 16*4,", {r0}") + TEST_P( "stmgtib r",4, 16*4,", {r0-r15}") + TEST_P( "stmleib r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmib r",13,-4, "!, {pc}") + + TEST_P( "ldmib r",0, 16*4,", {r0}") + TEST_BF_P("ldmeqib r",4, -4,", {r0-r15}") + TEST_BF_P("ldmneib r",7, 7*4,"!, {r8-r15}") + TEST_P( "ldmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmib r",14,14*4,"!, {pc}") + + TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}") + TEST_P( "stmeqdb r",13,16*4,"!, {r3-r12}") + TEST_P( "stmnedb r",2, 16*4,", {r3-r12,lr}") + TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}") + + TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}") + TEST_P( "ldmccia r",13,5*4, "!, {r3-r12}") + TEST_BF_P("ldmcsia r",2, 5*4, "!, {r3-r12,pc}") + TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}") + +#ifdef CONFIG_THUMB2_KERNEL + TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia r",0,15*4,", {pc}") + TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia r",13,0,", {r0-r15}") +#endif + TEST_BF("b 2f") + TEST_BF("bl 2f") + TEST_BB("b 2b") + TEST_BB("bl 2b") + + TEST_BF("beq 2f") + TEST_BF("bleq 2f") + TEST_BB("bne 2b") + TEST_BB("blne 2b") + + TEST_BF("bgt 2f") + TEST_BF("blgt 2f") + TEST_BB("blt 2b") + TEST_BB("bllt 2b") + + TEST_GROUP("Supervisor Call, and coprocessor instructions") + + /* + * We can't really test these by executing them, so all + * we can do is check that probes are, or are not allowed. + * At the moment none are allowed... + */ +#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code) + +#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc) \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13], {1}") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], {1}") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], {1}") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], {1}") \ + \ + TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \ + TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \ + TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \ + TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}") + +#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \ + \ + TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \ + TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \ + TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \ + TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \ + TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \ + TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \ + TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \ + TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \ + TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \ + TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \ + TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \ + TEST_COPROCESSOR( "mcr"two" 0, 0, r0, cr0, cr0, 0") \ + TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \ + TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") + + COPROCESSOR_INSTRUCTIONS_ST_LD("","e") + COPROCESSOR_INSTRUCTIONS_MC_MR("","e") + TEST_UNSUPPORTED("svc 0") + TEST_UNSUPPORTED("svc 0xffffff") + + TEST_UNSUPPORTED("svc 0") + + TEST_GROUP("Unconditional instruction") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("srsda sp, 0x13") + TEST_UNSUPPORTED("srsdb sp, 0x13") + TEST_UNSUPPORTED("srsia sp, 0x13") + TEST_UNSUPPORTED("srsib sp, 0x13") + TEST_UNSUPPORTED("srsda sp!, 0x13") + TEST_UNSUPPORTED("srsdb sp!, 0x13") + TEST_UNSUPPORTED("srsia sp!, 0x13") + TEST_UNSUPPORTED("srsib sp!, 0x13") + + TEST_UNSUPPORTED("rfeda sp") + TEST_UNSUPPORTED("rfedb sp") + TEST_UNSUPPORTED("rfeia sp") + TEST_UNSUPPORTED("rfeib sp") + TEST_UNSUPPORTED("rfeda sp!") + TEST_UNSUPPORTED("rfedb sp!") + TEST_UNSUPPORTED("rfeia sp!") + TEST_UNSUPPORTED("rfeib sp!") + TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc") + TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc") + TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc") + TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc") + TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!") + TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!") + TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!") + TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!") +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_X( "blx __dummy_thumb_subroutine_even", + ".thumb \n\t" + ".space 4 \n\t" + ".type __dummy_thumb_subroutine_even, %%function \n\t" + "__dummy_thumb_subroutine_even: \n\t" + "mov r0, pc \n\t" + "bx lr \n\t" + ".arm \n\t" + ) + TEST( "blx __dummy_thumb_subroutine_even") + + TEST_X( "blx __dummy_thumb_subroutine_odd", + ".thumb \n\t" + ".space 2 \n\t" + ".type __dummy_thumb_subroutine_odd, %%function \n\t" + "__dummy_thumb_subroutine_odd: \n\t" + "mov r0, pc \n\t" + "bx lr \n\t" + ".arm \n\t" + ) + TEST( "blx __dummy_thumb_subroutine_odd") +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + + COPROCESSOR_INSTRUCTIONS_ST_LD("2","f") +#if __LINUX_ARM_ARCH__ >= 6 + COPROCESSOR_INSTRUCTIONS_MC_MR("2","f") +#endif + + TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("cps 0x13") + TEST_UNSUPPORTED("cpsie i") + TEST_UNSUPPORTED("cpsid i") + TEST_UNSUPPORTED("cpsie i,0x13") + TEST_UNSUPPORTED("cpsid i,0x13") + TEST_UNSUPPORTED("setend le") + TEST_UNSUPPORTED("setend be") +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_P("pli [r",0,0b,", #16]") + TEST( "pli [pc, #0]") + TEST_RR("pli [r",12,0b,", r",0, 16,"]") + TEST_RR("pli [r",0, 0b,", -r",12,16,", lsl #4]") +#endif + +#if __LINUX_ARM_ARCH__ >= 5 + TEST_P("pld [r",0,32,", #-16]") + TEST( "pld [pc, #0]") + TEST_PR("pld [r",7, 24, ", r",0, 16,"]") + TEST_PR("pld [r",8, 24, ", -r",12,16,", lsl #4]") +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]") + TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]") + TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]"); +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_UNSUPPORTED("clrex") + TEST_UNSUPPORTED("dsb") + TEST_UNSUPPORTED("dmb") + TEST_UNSUPPORTED("isb") +#endif + + verbose("\n"); +} + diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c new file mode 100644 index 000000000000..5e726c31c45a --- /dev/null +++ b/arch/arm/kernel/kprobes-test-thumb.c @@ -0,0 +1,1187 @@ +/* + * arch/arm/kernel/kprobes-test-thumb.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "kprobes-test.h" + + +#define TEST_ISA "16" + +#define DONT_TEST_IN_ITBLOCK(tests) \ + kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK; \ + tests \ + kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK; + +#define CONDITION_INSTRUCTIONS(cc_pos, tests) \ + kprobe_test_cc_position = cc_pos; \ + DONT_TEST_IN_ITBLOCK(tests) \ + kprobe_test_cc_position = 0; + +#define TEST_ITBLOCK(code) \ + kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK; \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code" \n\t" \ + " mov r1, #0x11 \n\t" \ + " mov r2, #0x22 \n\t" \ + " mov r3, #0x33 \n\t" \ + "2: nop \n\t" \ + TESTCASE_END \ + kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK; + +#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_PTR(reg, val) \ + TEST_ARG_REG(14, 99f+1) \ + TEST_ARG_MEM(15, 3f) \ + TEST_ARG_END("") \ + " nop \n\t" /* To align 1f */ \ + "50: nop \n\t" \ + "1: "code1 #reg code2" \n\t" \ + " bx lr \n\t" \ + ".arm \n\t" \ + "3: adr lr, 2f+1 \n\t" \ + " bx lr \n\t" \ + ".thumb \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + + +void kprobe_thumb16_test_cases(void) +{ + kprobe_test_flags = TEST_FLAG_NARROW_INSTR; + + TEST_GROUP("Shift (immediate), add, subtract, move, and compare") + + TEST_R( "lsls r7, r",0,VAL1,", #5") + TEST_R( "lsls r0, r",7,VAL2,", #11") + TEST_R( "lsrs r7, r",0,VAL1,", #5") + TEST_R( "lsrs r0, r",7,VAL2,", #11") + TEST_R( "asrs r7, r",0,VAL1,", #5") + TEST_R( "asrs r0, r",7,VAL2,", #11") + TEST_RR( "adds r2, r",0,VAL1,", r",7,VAL2,"") + TEST_RR( "adds r5, r",7,VAL2,", r",0,VAL2,"") + TEST_RR( "subs r2, r",0,VAL1,", r",7,VAL2,"") + TEST_RR( "subs r5, r",7,VAL2,", r",0,VAL2,"") + TEST_R( "adds r7, r",0,VAL1,", #5") + TEST_R( "adds r0, r",7,VAL2,", #2") + TEST_R( "subs r7, r",0,VAL1,", #5") + TEST_R( "subs r0, r",7,VAL2,", #2") + TEST( "movs.n r0, #0x5f") + TEST( "movs.n r7, #0xa0") + TEST_R( "cmp.n r",0,0x5e, ", #0x5f") + TEST_R( "cmp.n r",5,0x15f,", #0x5f") + TEST_R( "cmp.n r",7,0xa0, ", #0xa0") + TEST_R( "adds.n r",0,VAL1,", #0x5f") + TEST_R( "adds.n r",7,VAL2,", #0xa0") + TEST_R( "subs.n r",0,VAL1,", #0x5f") + TEST_R( "subs.n r",7,VAL2,", #0xa0") + + TEST_GROUP("16-bit Thumb data-processing instructions") + +#define DATA_PROCESSING16(op,val) \ + TEST_RR( op" r",0,VAL1,", r",7,val,"") \ + TEST_RR( op" r",7,VAL2,", r",0,val,"") + + DATA_PROCESSING16("ands",0xf00f00ff) + DATA_PROCESSING16("eors",0xf00f00ff) + DATA_PROCESSING16("lsls",11) + DATA_PROCESSING16("lsrs",11) + DATA_PROCESSING16("asrs",11) + DATA_PROCESSING16("adcs",VAL2) + DATA_PROCESSING16("sbcs",VAL2) + DATA_PROCESSING16("rors",11) + DATA_PROCESSING16("tst",0xf00f00ff) + TEST_R("rsbs r",0,VAL1,", #0") + TEST_R("rsbs r",7,VAL2,", #0") + DATA_PROCESSING16("cmp",0xf00f00ff) + DATA_PROCESSING16("cmn",0xf00f00ff) + DATA_PROCESSING16("orrs",0xf00f00ff) + DATA_PROCESSING16("muls",VAL2) + DATA_PROCESSING16("bics",0xf00f00ff) + DATA_PROCESSING16("mvns",VAL2) + + TEST_GROUP("Special data instructions and branch and exchange") + + TEST_RR( "add r",0, VAL1,", r",7,VAL2,"") + TEST_RR( "add r",3, VAL2,", r",8,VAL3,"") + TEST_RR( "add r",8, VAL3,", r",0,VAL1,"") + TEST_R( "add sp" ", r",8,-8, "") + TEST_R( "add r",14,VAL1,", pc") + TEST_BF_R("add pc" ", r",0,2f-1f-8,"") + TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc") + + TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"") + TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"") + TEST_R( "cmp sp" ", r",8,-8, "") + + TEST_R( "mov r0, r",7,VAL2,"") + TEST_R( "mov r3, r",8,VAL3,"") + TEST_R( "mov r8, r",0,VAL1,"") + TEST_P( "mov sp, r",8,-8, "") + TEST( "mov lr, pc") + TEST_BF_R("mov pc, r",0,2f, "") + + TEST_BF_R("bx r",0, 2f+1,"") + TEST_BF_R("bx r",14,2f+1,"") + TESTCASE_START("bx pc") + TEST_ARG_REG(14, 99f+1) + TEST_ARG_END("") + " nop \n\t" /* To align the bx pc*/ + "50: nop \n\t" + "1: bx pc \n\t" + " bx lr \n\t" + ".arm \n\t" + " adr lr, 2f+1 \n\t" + " bx lr \n\t" + ".thumb \n\t" + "2: nop \n\t" + TESTCASE_END + + TEST_BF_R("blx r",0, 2f+1,"") + TEST_BB_R("blx r",14,2f+1,"") + TEST_UNSUPPORTED(".short 0x47f8 @ blx pc") + + TEST_GROUP("Load from Literal Pool") + + TEST_X( "ldr r0, 3f", + ".align \n\t" + "3: .word "__stringify(VAL1)) + TEST_X( "ldr r7, 3f", + ".space 128 \n\t" + ".align \n\t" + "3: .word "__stringify(VAL2)) + + TEST_GROUP("16-bit Thumb Load/store instructions") + + TEST_RPR("str r",0, VAL1,", [r",1, 24,", r",2, 48,"]") + TEST_RPR("str r",7, VAL2,", [r",6, 24,", r",5, 48,"]") + TEST_RPR("strh r",0, VAL1,", [r",1, 24,", r",2, 48,"]") + TEST_RPR("strh r",7, VAL2,", [r",6, 24,", r",5, 48,"]") + TEST_RPR("strb r",0, VAL1,", [r",1, 24,", r",2, 48,"]") + TEST_RPR("strb r",7, VAL2,", [r",6, 24,", r",5, 48,"]") + TEST_PR( "ldrsb r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrsb r7, [r",6, 24,", r",5, 50,"]") + TEST_PR( "ldr r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldr r7, [r",6, 24,", r",5, 48,"]") + TEST_PR( "ldrh r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrh r7, [r",6, 24,", r",5, 50,"]") + TEST_PR( "ldrb r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrb r7, [r",6, 24,", r",5, 50,"]") + TEST_PR( "ldrsh r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrsh r7, [r",6, 24,", r",5, 50,"]") + + TEST_RP("str r",0, VAL1,", [r",1, 24,", #120]") + TEST_RP("str r",7, VAL2,", [r",6, 24,", #120]") + TEST_P( "ldr r0, [r",1, 24,", #120]") + TEST_P( "ldr r7, [r",6, 24,", #120]") + TEST_RP("strb r",0, VAL1,", [r",1, 24,", #30]") + TEST_RP("strb r",7, VAL2,", [r",6, 24,", #30]") + TEST_P( "ldrb r0, [r",1, 24,", #30]") + TEST_P( "ldrb r7, [r",6, 24,", #30]") + TEST_RP("strh r",0, VAL1,", [r",1, 24,", #60]") + TEST_RP("strh r",7, VAL2,", [r",6, 24,", #60]") + TEST_P( "ldrh r0, [r",1, 24,", #60]") + TEST_P( "ldrh r7, [r",6, 24,", #60]") + + TEST_R( "str r",0, VAL1,", [sp, #0]") + TEST_R( "str r",7, VAL2,", [sp, #160]") + TEST( "ldr r0, [sp, #0]") + TEST( "ldr r7, [sp, #160]") + + TEST_RP("str r",0, VAL1,", [r",0, 24,"]") + TEST_P( "ldr r0, [r",0, 24,"]") + + TEST_GROUP("Generate PC-/SP-relative address") + + TEST("add r0, pc, #4") + TEST("add r7, pc, #1020") + TEST("add r0, sp, #4") + TEST("add r7, sp, #1020") + + TEST_GROUP("Miscellaneous 16-bit instructions") + + TEST_UNSUPPORTED( "cpsie i") + TEST_UNSUPPORTED( "cpsid i") + TEST_UNSUPPORTED( "setend le") + TEST_UNSUPPORTED( "setend be") + + TEST("add sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */ + TEST("sub sp, #0x7f*4") + +DONT_TEST_IN_ITBLOCK( + TEST_BF_R( "cbnz r",0,0, ", 2f") + TEST_BF_R( "cbz r",2,-1,", 2f") + TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20) + TEST_BF_RX( "cbz r",7,0, ", 2f",0x40) +) + TEST_R("sxth r0, r",7, HH1,"") + TEST_R("sxth r7, r",0, HH2,"") + TEST_R("sxtb r0, r",7, HH1,"") + TEST_R("sxtb r7, r",0, HH2,"") + TEST_R("uxth r0, r",7, HH1,"") + TEST_R("uxth r7, r",0, HH2,"") + TEST_R("uxtb r0, r",7, HH1,"") + TEST_R("uxtb r7, r",0, HH2,"") + TEST_R("rev r0, r",7, VAL1,"") + TEST_R("rev r7, r",0, VAL2,"") + TEST_R("rev16 r0, r",7, VAL1,"") + TEST_R("rev16 r7, r",0, VAL2,"") + TEST_UNSUPPORTED(".short 0xba80") + TEST_UNSUPPORTED(".short 0xbabf") + TEST_R("revsh r0, r",7, VAL1,"") + TEST_R("revsh r7, r",0, VAL2,"") + +#define TEST_POPPC(code, offset) \ + TESTCASE_START(code) \ + TEST_ARG_PTR(13, offset) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code,0) \ + TESTCASE_END + + TEST("push {r0}") + TEST("push {r7}") + TEST("push {r14}") + TEST("push {r0-r7,r14}") + TEST("push {r0,r2,r4,r6,r14}") + TEST("push {r1,r3,r5,r7}") + TEST("pop {r0}") + TEST("pop {r7}") + TEST("pop {r0,r2,r4,r6}") + TEST_POPPC("pop {pc}",15*4) + TEST_POPPC("pop {r0-r7,pc}",7*4) + TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4) + TEST_THUMB_TO_ARM_INTERWORK_P("pop {pc} @ ",13,15*4,"") + TEST_THUMB_TO_ARM_INTERWORK_P("pop {r0-r7,pc} @ ",13,7*4,"") + + TEST_UNSUPPORTED("bkpt.n 0") + TEST_UNSUPPORTED("bkpt.n 255") + + TEST_SUPPORTED("yield") + TEST("sev") + TEST("nop") + TEST("wfi") + TEST_SUPPORTED("wfe") + TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */ + TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */ + +#define TEST_IT(code, code2) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code" \n\t" \ + " "code2" \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + +DONT_TEST_IN_ITBLOCK( + TEST_IT("it eq","moveq r0,#0") + TEST_IT("it vc","movvc r0,#0") + TEST_IT("it le","movle r0,#0") + TEST_IT("ite eq","moveq r0,#0\n\t movne r1,#1") + TEST_IT("itet vc","movvc r0,#0\n\t movvs r1,#1\n\t movvc r2,#2") + TEST_IT("itete le","movle r0,#0\n\t movgt r1,#1\n\t movle r2,#2\n\t movgt r3,#3") + TEST_IT("itttt le","movle r0,#0\n\t movle r1,#1\n\t movle r2,#2\n\t movle r3,#3") + TEST_IT("iteee le","movle r0,#0\n\t movgt r1,#1\n\t movgt r2,#2\n\t movgt r3,#3") +) + + TEST_GROUP("Load and store multiple") + + TEST_P("ldmia r",4, 16*4,"!, {r0,r7}") + TEST_P("ldmia r",7, 16*4,"!, {r0-r6}") + TEST_P("stmia r",4, 16*4,"!, {r0,r7}") + TEST_P("stmia r",0, 16*4,"!, {r0-r7}") + + TEST_GROUP("Conditional branch and Supervisor Call instructions") + +CONDITION_INSTRUCTIONS(8, + TEST_BF("beq 2f") + TEST_BB("bne 2b") + TEST_BF("bgt 2f") + TEST_BB("blt 2b") +) + TEST_UNSUPPORTED(".short 0xde00") + TEST_UNSUPPORTED(".short 0xdeff") + TEST_UNSUPPORTED("svc #0x00") + TEST_UNSUPPORTED("svc #0xff") + + TEST_GROUP("Unconditional branch") + + TEST_BF( "b 2f") + TEST_BB( "b 2b") + TEST_BF_X("b 2f", 0x400) + TEST_BB_X("b 2b", 0x400) + + TEST_GROUP("Testing instructions in IT blocks") + + TEST_ITBLOCK("subs.n r0, r0") + + verbose("\n"); +} + + +void kprobe_thumb32_test_cases(void) +{ + kprobe_test_flags = 0; + + TEST_GROUP("Load/store multiple") + + TEST_UNSUPPORTED("rfedb sp") + TEST_UNSUPPORTED("rfeia sp") + TEST_UNSUPPORTED("rfedb sp!") + TEST_UNSUPPORTED("rfeia sp!") + + TEST_P( "stmia r",0, 16*4,", {r0,r8}") + TEST_P( "stmia r",4, 16*4,", {r0-r12,r14}") + TEST_P( "stmia r",7, 16*4,"!, {r8-r12,r14}") + TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + + TEST_P( "ldmia r",0, 16*4,", {r0,r8}") + TEST_P( "ldmia r",4, 0, ", {r0-r12,r14}") + TEST_BF_P("ldmia r",5, 8*4, "!, {r6-r12,r15}") + TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmia r",14,14*4,"!, {r4,pc}") + + TEST_P( "stmdb r",0, 16*4,", {r0,r8}") + TEST_P( "stmdb r",4, 16*4,", {r0-r12,r14}") + TEST_P( "stmdb r",5, 16*4,"!, {r8-r12,r14}") + TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + + TEST_P( "ldmdb r",0, 16*4,", {r0,r8}") + TEST_P( "ldmdb r",4, 16*4,", {r0-r12,r14}") + TEST_BF_P("ldmdb r",5, 16*4,"!, {r6-r12,r15}") + TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmdb r",14,16*4,"!, {r4,pc}") + + TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}") + TEST_P( "stmdb r",13,16*4,"!, {r3-r12}") + TEST_P( "stmdb r",2, 16*4,", {r3-r12,lr}") + TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}") + + TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}") + TEST_P( "ldmia r",13,5*4, "!, {r3-r12}") + TEST_BF_P("ldmia r",2, 5*4, "!, {r3-r12,pc}") + TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}") + + TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}") + TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}") + + TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}") + TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}") + TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}") + TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}") + TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}") + TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}") + TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}") + + TEST_GROUP("Load/store double or exclusive, table branch") + + TEST_P( "ldrd r0, r1, [r",1, 24,", #-16]") + TEST( "ldrd r12, r14, [sp, #16]") + TEST_P( "ldrd r1, r0, [r",7, 24,", #-16]!") + TEST( "ldrd r14, r12, [sp, #16]!") + TEST_P( "ldrd r1, r0, [r",7, 24,"], #16") + TEST( "ldrd r7, r8, [sp], #-16") + + TEST_X( "ldrd r12, r14, 3f", + ".align 3 \n\t" + "3: .word "__stringify(VAL1)" \n\t" + " .word "__stringify(VAL2)) + + TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!") + TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16") + TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]") + TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]") + TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]") + TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]") + + TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]") + TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]") + TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!") + TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!") + TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16") + TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16") + TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!") + TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16") + + TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]", + "9: \n\t" + ".byte (2f-1b-4)>>1 \n\t" + ".byte (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RX("tbb [pc, r",4, (9f-(1f+4)+1),"]", + "9: \n\t" + ".byte (2f-1b-4)>>1 \n\t" + ".byte (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RRX("tbb [r",1,9f,", r",2,0,"]", + "9: \n\t" + ".byte (2f-1b-4)>>1 \n\t" + ".byte (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]", + "9: \n\t" + ".short (2f-1b-4)>>1 \n\t" + ".short (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]", + "9: \n\t" + ".short (2f-1b-4)>>1 \n\t" + ".short (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RRX("tbh [r",1,9f, ", r",14,1,"]", + "9: \n\t" + ".short (2f-1b-4)>>1 \n\t" + ".short (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]") + TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]") + TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]") + + TEST_UNSUPPORTED("strexb r0, r1, [r2]") + TEST_UNSUPPORTED("strexh r0, r1, [r2]") + TEST_UNSUPPORTED("strexd r0, r1, [r2]") + TEST_UNSUPPORTED("ldrexb r0, [r1]") + TEST_UNSUPPORTED("ldrexh r0, [r1]") + TEST_UNSUPPORTED("ldrexd r0, [r1]") + + TEST_GROUP("Data-processing (shifted register) and (modified immediate)") + +#define _DATA_PROCESSING32_DNM(op,s,val) \ + TEST_RR(op s".w r0, r",1, VAL1,", r",2, val, "") \ + TEST_RR(op s" r1, r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR(op s" r2, r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR(op s" r3, r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR(op s" r4, r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR(op s" r5, r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR(op s" r8, r",9, VAL1,", r",10,val, ", rrx") \ + TEST_R( op s" r0, r",11,VAL1,", #0x00010001") \ + TEST_R( op s" r11, r",0, VAL1,", #0xf5000000") \ + TEST_R( op s" r7, r",8, VAL2,", #0x000af000") + +#define DATA_PROCESSING32_DNM(op,val) \ + _DATA_PROCESSING32_DNM(op,"",val) \ + _DATA_PROCESSING32_DNM(op,"s",val) + +#define DATA_PROCESSING32_NM(op,val) \ + TEST_RR(op".w r",1, VAL1,", r",2, val, "") \ + TEST_RR(op" r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR(op" r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR(op" r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR(op" r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR(op" r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR(op" r",9, VAL1,", r",10,val, ", rrx") \ + TEST_R( op" r",11,VAL1,", #0x00010001") \ + TEST_R( op" r",0, VAL1,", #0xf5000000") \ + TEST_R( op" r",8, VAL2,", #0x000af000") + +#define _DATA_PROCESSING32_DM(op,s,val) \ + TEST_R( op s".w r0, r",14, val, "") \ + TEST_R( op s" r1, r",12, val, ", lsl #3") \ + TEST_R( op s" r2, r",11, val, ", lsr #4") \ + TEST_R( op s" r3, r",10, val, ", asr #5") \ + TEST_R( op s" r4, r",9, N(val),", asr #6") \ + TEST_R( op s" r5, r",8, val, ", ror #7") \ + TEST_R( op s" r8, r",7,val, ", rrx") \ + TEST( op s" r0, #0x00010001") \ + TEST( op s" r11, #0xf5000000") \ + TEST( op s" r7, #0x000af000") \ + TEST( op s" r4, #0x00005a00") + +#define DATA_PROCESSING32_DM(op,val) \ + _DATA_PROCESSING32_DM(op,"",val) \ + _DATA_PROCESSING32_DM(op,"s",val) + + DATA_PROCESSING32_DNM("and",0xf00f00ff) + DATA_PROCESSING32_NM("tst",0xf00f00ff) + DATA_PROCESSING32_DNM("bic",0xf00f00ff) + DATA_PROCESSING32_DNM("orr",0xf00f00ff) + DATA_PROCESSING32_DM("mov",VAL2) + DATA_PROCESSING32_DNM("orn",0xf00f00ff) + DATA_PROCESSING32_DM("mvn",VAL2) + DATA_PROCESSING32_DNM("eor",0xf00f00ff) + DATA_PROCESSING32_NM("teq",0xf00f00ff) + DATA_PROCESSING32_DNM("add",VAL2) + DATA_PROCESSING32_NM("cmn",VAL2) + DATA_PROCESSING32_DNM("adc",VAL2) + DATA_PROCESSING32_DNM("sbc",VAL2) + DATA_PROCESSING32_DNM("sub",VAL2) + DATA_PROCESSING32_NM("cmp",VAL2) + DATA_PROCESSING32_DNM("rsb",VAL2) + + TEST_RR("pkhbt r0, r",0, HH1,", r",1, HH2,"") + TEST_RR("pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2") + TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"") + TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2") + + TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp") + TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc") + TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7") + TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7") + TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp") + TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc") + TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7") + TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7") + TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp") + TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc") + TEST_P("cmn.w sp, r",7,0,"") + TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7") + TEST( "cmn sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp") + TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc") + TEST_P("cmp.w sp, r",7,0,"") + TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7") + TEST( "cmp sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp") + TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc") + TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7") + TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7") + TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008") + + TEST_R("add.w r0, sp, r",1, 4,"") + TEST_R("adds r0, sp, r",1, 4,", asl #3") + TEST_R("add r0, sp, r",1, 4,", asl #4") + TEST_R("add r0, sp, r",1, 16,", ror #1") + TEST_R("add.w sp, sp, r",1, 4,"") + TEST_R("add sp, sp, r",1, 4,", asl #3") + TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4") + TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1") + TEST( "add.w r0, sp, #24") + TEST( "add.w sp, sp, #24") + TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1") + TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc") + TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp") + TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc") + TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp") + + TEST_R("sub.w r0, sp, r",1, 4,"") + TEST_R("subs r0, sp, r",1, 4,", asl #3") + TEST_R("sub r0, sp, r",1, 4,", asl #4") + TEST_R("sub r0, sp, r",1, 16,", ror #1") + TEST_R("sub.w sp, sp, r",1, 4,"") + TEST_R("sub sp, sp, r",1, 4,", asl #3") + TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4") + TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1") + TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1") + TEST( "sub.w r0, sp, #24") + TEST( "sub.w sp, sp, #24") + + TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc") + TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3") + TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3") + TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp") + TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3") + TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3") + TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008") + TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008") + TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008") + + TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc") + TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3") + TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3") + TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp") + TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3") + TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3") + TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008") + TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008") + TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008") + + TEST_UNSUPPORTED(".short 0xeaa0,0x0000") + TEST_UNSUPPORTED(".short 0xeaf0,0x0000") + TEST_UNSUPPORTED(".short 0xeb20,0x0000") + TEST_UNSUPPORTED(".short 0xeb80,0x0000") + TEST_UNSUPPORTED(".short 0xebe0,0x0000") + + TEST_UNSUPPORTED(".short 0xf0a0,0x0000") + TEST_UNSUPPORTED(".short 0xf0c0,0x0000") + TEST_UNSUPPORTED(".short 0xf0f0,0x0000") + TEST_UNSUPPORTED(".short 0xf120,0x0000") + TEST_UNSUPPORTED(".short 0xf180,0x0000") + TEST_UNSUPPORTED(".short 0xf1e0,0x0000") + + TEST_GROUP("Coprocessor instructions") + + TEST_UNSUPPORTED(".short 0xec00,0x0000") + TEST_UNSUPPORTED(".short 0xeff0,0x0000") + TEST_UNSUPPORTED(".short 0xfc00,0x0000") + TEST_UNSUPPORTED(".short 0xfff0,0x0000") + + TEST_GROUP("Data-processing (plain binary immediate)") + + TEST_R("addw r0, r",1, VAL1,", #0x123") + TEST( "addw r14, sp, #0xf5a") + TEST( "addw sp, sp, #0x20") + TEST( "addw r7, pc, #0x888") + TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120") + TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120") + + TEST_R("subw r0, r",1, VAL1,", #0x123") + TEST( "subw r14, sp, #0xf5a") + TEST( "subw sp, sp, #0x20") + TEST( "subw r7, pc, #0x888") + TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120") + TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120") + + TEST("movw r0, #0") + TEST("movw r0, #0xffff") + TEST("movw lr, #0xffff") + TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0") + TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0") + + TEST_R("movt r",0, VAL1,", #0") + TEST_R("movt r",0, VAL2,", #0xffff") + TEST_R("movt r",14,VAL1,", #0xffff") + TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0") + TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0") + + TEST_R( "ssat r0, #24, r",0, VAL1,"") + TEST_R( "ssat r14, #24, r",12, VAL2,"") + TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12") + TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12") + TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp") + TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc") + + TEST_R( "usat r0, #24, r",0, VAL1,"") + TEST_R( "usat r14, #24, r",12, VAL2,"") + TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "usat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12") + TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12") + TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp") + TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc") + + TEST_R( "ssat16 r0, #12, r",0, HH1,"") + TEST_R( "ssat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12") + TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12") + TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp") + TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc") + + TEST_R( "usat16 r0, #12, r",0, HH1,"") + TEST_R( "usat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12") + TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12") + TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp") + TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc") + + TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "sbfx r14, r",12, VAL2,", #8, #16") + TEST_R( "sbfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16") + TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16") + + TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "ubfx r14, r",12, VAL2,", #8, #16") + TEST_R( "ubfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16") + TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16") + + TEST_R( "bfc r",0, VAL1,", #4, #20") + TEST_R( "bfc r",14,VAL2,", #4, #20") + TEST_R( "bfc r",7, VAL1,", #0, #31") + TEST_R( "bfc r",8, VAL2,", #0, #31") + TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31") + TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31") + + TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31") + TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20") + TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20") + TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20") + TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20") + + TEST_GROUP("Branches and miscellaneous control") + +CONDITION_INSTRUCTIONS(22, + TEST_BF("beq.w 2f") + TEST_BB("bne.w 2b") + TEST_BF("bgt.w 2f") + TEST_BB("blt.w 2b") + TEST_BF_X("bpl.w 2f",0x1000) +) + + TEST_UNSUPPORTED("msr cpsr, r0") + TEST_UNSUPPORTED("msr cpsr_f, r1") + TEST_UNSUPPORTED("msr spsr, r2") + + TEST_UNSUPPORTED("cpsie.w i") + TEST_UNSUPPORTED("cpsid.w i") + TEST_UNSUPPORTED("cps 0x13") + + TEST_SUPPORTED("yield.w") + TEST("sev.w") + TEST("nop.w") + TEST("wfi.w") + TEST_SUPPORTED("wfe.w") + TEST_UNSUPPORTED("dbg.w #0") + + TEST_UNSUPPORTED("clrex") + TEST_UNSUPPORTED("dsb") + TEST_UNSUPPORTED("dmb") + TEST_UNSUPPORTED("isb") + + TEST_UNSUPPORTED("bxj r0") + + TEST_UNSUPPORTED("subs pc, lr, #4") + + TEST("mrs r0, cpsr") + TEST("mrs r14, cpsr") + TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr") + TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr") + TEST_UNSUPPORTED("mrs r0, spsr") + TEST_UNSUPPORTED("mrs lr, spsr") + + TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0") + + TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined") + + TEST_BF( "b.w 2f") + TEST_BB( "b.w 2b") + TEST_BF_X("b.w 2f", 0x1000) + + TEST_BF( "bl.w 2f") + TEST_BB( "bl.w 2b") + TEST_BB_X("bl.w 2b", 0x1000) + + TEST_X( "blx __dummy_arm_subroutine", + ".arm \n\t" + ".align \n\t" + ".type __dummy_arm_subroutine, %%function \n\t" + "__dummy_arm_subroutine: \n\t" + "mov r0, pc \n\t" + "bx lr \n\t" + ".thumb \n\t" + ) + TEST( "blx __dummy_arm_subroutine") + + TEST_GROUP("Store single data item") + +#define SINGLE_STORE(size) \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,-1024,", #1024]") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, -1024,", #1080]") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #120") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #128") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #-120") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #-128") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,24, ", #120]!") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, ", #128]!") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]!") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \ + TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \ + TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \ + TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \ + TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \ + TEST_UNSUPPORTED("str"size"t r0, [r1, #4]") + + SINGLE_STORE("b") + SINGLE_STORE("h") + SINGLE_STORE("") + + TEST("str sp, [sp]") + TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]") + TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]") + + TEST_GROUP("Advanced SIMD element or structure load/store instructions") + + TEST_UNSUPPORTED(".short 0xf900,0x0000") + TEST_UNSUPPORTED(".short 0xf92f,0xffff") + TEST_UNSUPPORTED(".short 0xf980,0x0000") + TEST_UNSUPPORTED(".short 0xf9ef,0xffff") + + TEST_GROUP("Load single data item and memory hints") + +#define SINGLE_LOAD(size) \ + TEST_P( "ldr"size" r0, [r",11,-1024, ", #1024]") \ + TEST_P( "ldr"size" r14, [r",1, -1024,", #1080]") \ + TEST_P( "ldr"size" r0, [r",11,256, ", #-120]") \ + TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]") \ + TEST_P( "ldr"size" r0, [r",11,24, "], #120") \ + TEST_P( "ldr"size" r14, [r",1, 24, "], #128") \ + TEST_P( "ldr"size" r0, [r",11,24, "], #-120") \ + TEST_P( "ldr"size" r14, [r",1,24, "], #-128") \ + TEST_P( "ldr"size" r0, [r",11,24, ", #120]!") \ + TEST_P( "ldr"size" r14, [r",1, 24, ", #128]!") \ + TEST_P( "ldr"size" r0, [r",11,256, ", #-120]!") \ + TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]!") \ + TEST_PR("ldr"size".w r0, [r",1, 0,", r",2, 4,"]") \ + TEST_PR("ldr"size" r14, [r",10,0,", r",11,4,", lsl #1]") \ + TEST_X( "ldr"size".w r0, 3f", \ + ".align 3 \n\t" \ + "3: .word "__stringify(VAL1)) \ + TEST_X( "ldr"size".w r14, 3f", \ + ".align 3 \n\t" \ + "3: .word "__stringify(VAL2)) \ + TEST( "ldr"size".w r7, 3b") \ + TEST( "ldr"size".w r7, [sp, #24]") \ + TEST_P( "ldr"size".w r0, [r",0,0, "]") \ + TEST_UNSUPPORTED("ldr"size"t r0, [r1, #4]") + + SINGLE_LOAD("b") + SINGLE_LOAD("sb") + SINGLE_LOAD("h") + SINGLE_LOAD("sh") + SINGLE_LOAD("") + + TEST_BF_P("ldr pc, [r",14, 15*4,"]") + TEST_P( "ldr sp, [r",14, 13*4,"]") + TEST_BF_R("ldr pc, [sp, r",14, 15*4,"]") + TEST_R( "ldr sp, [sp, r",14, 13*4,"]") + TEST_THUMB_TO_ARM_INTERWORK_P("ldr pc, [r",0,0,", #15*4]") + TEST_SUPPORTED("ldr sp, 99f") + TEST_SUPPORTED("ldr pc, 99f") + + TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]") + TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]") + TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]") + TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]") + TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f") + TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]") + TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]") + + TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */ + + TEST( "pli [pc, #4]") + TEST( "pli [pc, #-4]") + TEST( "pld [pc, #4]") + TEST( "pld [pc, #-4]") + + TEST_P( "pld [r",0,-1024,", #1024]") + TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]") + TEST_P( "pli [r",4, 0b,", #1024]") + TEST_P( "pld [r",7, 120,", #-120]") + TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]") + TEST_P( "pli [r",11,120,", #-120]") + TEST( "pld [sp, #0]") + + TEST_PR("pld [r",7, 24, ", r",0, 16,"]") + TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]") + TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]") + TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]"); + TEST_RR("pli [r",12,0b,", r",0, 16,"]") + TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]") + TEST_R( "pld [sp, r",1, 16,"]") + TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]") + TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]") + + TEST_GROUP("Data-processing (register)") + +#define SHIFTS32(op) \ + TEST_RR(op" r0, r",1, VAL1,", r",2, 3, "") \ + TEST_RR(op" r14, r",12,VAL2,", r",11,10,"") + + SHIFTS32("lsl") + SHIFTS32("lsls") + SHIFTS32("lsr") + SHIFTS32("lsrs") + SHIFTS32("asr") + SHIFTS32("asrs") + SHIFTS32("ror") + SHIFTS32("rors") + + TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2") + TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2") + TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2") + TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2") + TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc") + TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp") + + TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxth r8, r",7, HH1,"") + + TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7"); + TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7"); + TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc"); + TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp"); + + TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxth r8, r",7, HH1,"") + + TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb16 r8, r",7, HH1,"") + + TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb16 r8, r",7, HH1,"") + + TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb r8, r",7, HH1,"") + + TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb r8, r",7, HH1,"") + + TEST_UNSUPPORTED(".short 0xfa60,0x00f0") + TEST_UNSUPPORTED(".short 0xfa7f,0xffff") + +#define PARALLEL_ADD_SUB(op) \ + TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"add16 r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"asx r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"asx r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"sax r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"sax r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"sub16 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"sub16 r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"add8 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"add8 r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"sub8 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"sub8 r14, r",12,HH2,", r",10,HH1,"") + + TEST_GROUP("Parallel addition and subtraction, signed") + + PARALLEL_ADD_SUB("s") + PARALLEL_ADD_SUB("q") + PARALLEL_ADD_SUB("sh") + + TEST_GROUP("Parallel addition and subtraction, unsigned") + + PARALLEL_ADD_SUB("u") + PARALLEL_ADD_SUB("uq") + PARALLEL_ADD_SUB("uh") + + TEST_GROUP("Miscellaneous operations") + + TEST_RR("qadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qadd lr, r",9, VAL2,", r",8, VAL1,"") + TEST_RR("qsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qsub lr, r",9, VAL2,", r",8, VAL1,"") + TEST_RR("qdadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qdadd lr, r",9, VAL2,", r",8, VAL1,"") + TEST_RR("qdsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qdsub lr, r",9, VAL2,", r",8, VAL1,"") + + TEST_R("rev.w r0, r",0, VAL1,"") + TEST_R("rev r14, r",12, VAL2,"") + TEST_R("rev16.w r0, r",0, VAL1,"") + TEST_R("rev16 r14, r",12, VAL2,"") + TEST_R("rbit r0, r",0, VAL1,"") + TEST_R("rbit r14, r",12, VAL2,"") + TEST_R("revsh.w r0, r",0, VAL1,"") + TEST_R("revsh r14, r",12, VAL2,"") + + TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12"); + TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12"); + TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc"); + TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp"); + + TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"") + + TEST_R("clz r0, r",0, 0x0,"") + TEST_R("clz r7, r",14,0x1,"") + TEST_R("clz lr, r",7, 0xffffffff,"") + + TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */ + + TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations") + + TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"") + TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9") + TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9") + TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9") + TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9") + TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc") + TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp") + + TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp"); + + TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + + TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlatb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlatt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbb r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smultb r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbt r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smultt r7, r",8, VAL3,", r",9, VAL1,"") + + TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"") + TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"") + + TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwb r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwt r7, r",8, VAL3,", r",9, VAL1,"") + + TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"") + TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"") + + TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"") + TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"") + + TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + + TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"") + TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"") + TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"") + + TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */ + + TEST_GROUP("Long multiply, long multiply accumulate, and divide") + + TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10"); + TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc"); + TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp"); + + TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"") + + TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + + TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlaltb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlaltt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + + TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + + TEST_RRRR( "smlsld r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlsld r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_RRRR( "smlsldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlsldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + + TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "umaal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umaal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + + TEST_GROUP("Coprocessor instructions") + + TEST_UNSUPPORTED(".short 0xfc00,0x0000") + TEST_UNSUPPORTED(".short 0xffff,0xffff") + + TEST_GROUP("Testing instructions in IT blocks") + + TEST_ITBLOCK("sub.w r0, r0") + + verbose("\n"); +} + diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c new file mode 100644 index 000000000000..e17cdd6d90d8 --- /dev/null +++ b/arch/arm/kernel/kprobes-test.c @@ -0,0 +1,1748 @@ +/* + * arch/arm/kernel/kprobes-test.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This file contains test code for ARM kprobes. + * + * The top level function run_all_tests() executes tests for all of the + * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests + * fall into two categories; run_api_tests() checks basic functionality of the + * kprobes API, and run_test_cases() is a comprehensive test for kprobes + * instruction decoding and simulation. + * + * run_test_cases() first checks the kprobes decoding table for self consistency + * (using table_test()) then executes a series of test cases for each of the CPU + * instruction forms. coverage_start() and coverage_end() are used to verify + * that these test cases cover all of the possible combinations of instructions + * described by the kprobes decoding tables. + * + * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c + * which use the macros defined in kprobes-test.h. The rest of this + * documentation will describe the operation of the framework used by these + * test cases. + */ + +/* + * TESTING METHODOLOGY + * ------------------- + * + * The methodology used to test an ARM instruction 'test_insn' is to use + * inline assembler like: + * + * test_before: nop + * test_case: test_insn + * test_after: nop + * + * When the test case is run a kprobe is placed of each nop. The + * post-handler of the test_before probe is used to modify the saved CPU + * register context to that which we require for the test case. The + * pre-handler of the of the test_after probe saves a copy of the CPU + * register context. In this way we can execute test_insn with a specific + * register context and see the results afterwards. + * + * To actually test the kprobes instruction emulation we perform the above + * step a second time but with an additional kprobe on the test_case + * instruction itself. If the emulation is accurate then the results seen + * by the test_after probe will be identical to the first run which didn't + * have a probe on test_case. + * + * Each test case is run several times with a variety of variations in the + * flags value of stored in CPSR, and for Thumb code, different ITState. + * + * For instructions which can modify PC, a second test_after probe is used + * like this: + * + * test_before: nop + * test_case: test_insn + * test_after: nop + * b test_done + * test_after2: nop + * test_done: + * + * The test case is constructed such that test_insn branches to + * test_after2, or, if testing a conditional instruction, it may just + * continue to test_after. The probes inserted at both locations let us + * determine which happened. A similar approach is used for testing + * backwards branches... + * + * b test_before + * b test_done @ helps to cope with off by 1 branches + * test_after2: nop + * b test_done + * test_before: nop + * test_case: test_insn + * test_after: nop + * test_done: + * + * The macros used to generate the assembler instructions describe above + * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B + * (branch backwards). In these, the local variables numbered 1, 50, 2 and + * 99 represent: test_before, test_case, test_after2 and test_done. + * + * FRAMEWORK + * --------- + * + * Each test case is wrapped between the pair of macros TESTCASE_START and + * TESTCASE_END. As well as performing the inline assembler boilerplate, + * these call out to the kprobes_test_case_start() and + * kprobes_test_case_end() functions which drive the execution of the test + * case. The specific arguments to use for each test case are stored as + * inline data constructed using the various TEST_ARG_* macros. Putting + * this all together, a simple test case may look like: + * + * TESTCASE_START("Testing mov r0, r7") + * TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678 + * TEST_ARG_END("") + * TEST_INSTRUCTION("mov r0, r7") + * TESTCASE_END + * + * Note, in practice the single convenience macro TEST_R would be used for this + * instead. + * + * The above would expand to assembler looking something like: + * + * @ TESTCASE_START + * bl __kprobes_test_case_start + * @ start of inline data... + * .ascii "mov r0, r7" @ text title for test case + * .byte 0 + * .align 2 + * + * @ TEST_ARG_REG + * .byte ARG_TYPE_REG + * .byte 7 + * .short 0 + * .word 0x1234567 + * + * @ TEST_ARG_END + * .byte ARG_TYPE_END + * .byte TEST_ISA @ flags, including ISA being tested + * .short 50f-0f @ offset of 'test_before' + * .short 2f-0f @ offset of 'test_after2' (if relevent) + * .short 99f-0f @ offset of 'test_done' + * @ start of test case code... + * 0: + * .code TEST_ISA @ switch to ISA being tested + * + * @ TEST_INSTRUCTION + * 50: nop @ location for 'test_before' probe + * 1: mov r0, r7 @ the test case instruction 'test_insn' + * nop @ location for 'test_after' probe + * + * // TESTCASE_END + * 2: + * 99: bl __kprobes_test_case_end_##TEST_ISA + * .code NONMAL_ISA + * + * When the above is execute the following happens... + * + * __kprobes_test_case_start() is an assembler wrapper which sets up space + * for a stack buffer and calls the C function kprobes_test_case_start(). + * This C function will do some initial processing of the inline data and + * setup some global state. It then inserts the test_before and test_after + * kprobes and returns a value which causes the assembler wrapper to jump + * to the start of the test case code, (local label '0'). + * + * When the test case code executes, the test_before probe will be hit and + * test_before_post_handler will call setup_test_context(). This fills the + * stack buffer and CPU registers with a test pattern and then processes + * the test case arguments. In our example there is one TEST_ARG_REG which + * indicates that R7 should be loaded with the value 0x12345678. + * + * When the test_before probe ends, the test case continues and executes + * the "mov r0, r7" instruction. It then hits the test_after probe and the + * pre-handler for this (test_after_pre_handler) will save a copy of the + * CPU register context. This should now have R0 holding the same value as + * R7. + * + * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is + * an assembler wrapper which switches back to the ISA used by the test + * code and calls the C function kprobes_test_case_end(). + * + * For each run through the test case, test_case_run_count is incremented + * by one. For even runs, kprobes_test_case_end() saves a copy of the + * register and stack buffer contents from the test case just run. It then + * inserts a kprobe on the test case instruction 'test_insn' and returns a + * value to cause the test case code to be re-run. + * + * For odd numbered runs, kprobes_test_case_end() compares the register and + * stack buffer contents to those that were saved on the previous even + * numbered run (the one without the kprobe on test_insn). These should be + * the same if the kprobe instruction simulation routine is correct. + * + * The pair of test case runs is repeated with different combinations of + * flag values in CPSR and, for Thumb, different ITState. This is + * controlled by test_context_cpsr(). + * + * BUILDING TEST CASES + * ------------------- + * + * + * As an aid to building test cases, the stack buffer is initialised with + * some special values: + * + * [SP+13*4] Contains SP+120. This can be used to test instructions + * which load a value into SP. + * + * [SP+15*4] When testing branching instructions using TEST_BRANCH_{F,B}, + * this holds the target address of the branch, 'test_after2'. + * This can be used to test instructions which load a PC value + * from memory. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/kprobes.h> + +#include "kprobes.h" +#include "kprobes-test.h" + + +#define BENCHMARKING 1 + + +/* + * Test basic API + */ + +static bool test_regs_ok; +static int test_func_instance; +static int pre_handler_called; +static int post_handler_called; +static int jprobe_func_called; +static int kretprobe_handler_called; + +#define FUNC_ARG1 0x12345678 +#define FUNC_ARG2 0xabcdef + + +#ifndef CONFIG_THUMB2_KERNEL + +long arm_func(long r0, long r1); + +static void __used __naked __arm_kprobes_test_func(void) +{ + __asm__ __volatile__ ( + ".arm \n\t" + ".type arm_func, %%function \n\t" + "arm_func: \n\t" + "adds r0, r0, r1 \n\t" + "bx lr \n\t" + ".code "NORMAL_ISA /* Back to Thumb if necessary */ + : : : "r0", "r1", "cc" + ); +} + +#else /* CONFIG_THUMB2_KERNEL */ + +long thumb16_func(long r0, long r1); +long thumb32even_func(long r0, long r1); +long thumb32odd_func(long r0, long r1); + +static void __used __naked __thumb_kprobes_test_funcs(void) +{ + __asm__ __volatile__ ( + ".type thumb16_func, %%function \n\t" + "thumb16_func: \n\t" + "adds.n r0, r0, r1 \n\t" + "bx lr \n\t" + + ".align \n\t" + ".type thumb32even_func, %%function \n\t" + "thumb32even_func: \n\t" + "adds.w r0, r0, r1 \n\t" + "bx lr \n\t" + + ".align \n\t" + "nop.n \n\t" + ".type thumb32odd_func, %%function \n\t" + "thumb32odd_func: \n\t" + "adds.w r0, r0, r1 \n\t" + "bx lr \n\t" + + : : : "r0", "r1", "cc" + ); +} + +#endif /* CONFIG_THUMB2_KERNEL */ + + +static int call_test_func(long (*func)(long, long), bool check_test_regs) +{ + long ret; + + ++test_func_instance; + test_regs_ok = false; + + ret = (*func)(FUNC_ARG1, FUNC_ARG2); + if (ret != FUNC_ARG1 + FUNC_ARG2) { + pr_err("FAIL: call_test_func: func returned %lx\n", ret); + return false; + } + + if (check_test_regs && !test_regs_ok) { + pr_err("FAIL: test regs not OK\n"); + return false; + } + + return true; +} + +static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + pre_handler_called = test_func_instance; + if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2) + test_regs_ok = true; + return 0; +} + +static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs, + unsigned long flags) +{ + post_handler_called = test_func_instance; + if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2) + test_regs_ok = false; +} + +static struct kprobe the_kprobe = { + .addr = 0, + .pre_handler = pre_handler, + .post_handler = post_handler +}; + +static int test_kprobe(long (*func)(long, long)) +{ + int ret; + + the_kprobe.addr = (kprobe_opcode_t *)func; + ret = register_kprobe(&the_kprobe); + if (ret < 0) { + pr_err("FAIL: register_kprobe failed with %d\n", ret); + return ret; + } + + ret = call_test_func(func, true); + + unregister_kprobe(&the_kprobe); + the_kprobe.flags = 0; /* Clear disable flag to allow reuse */ + + if (!ret) + return -EINVAL; + if (pre_handler_called != test_func_instance) { + pr_err("FAIL: kprobe pre_handler not called\n"); + return -EINVAL; + } + if (post_handler_called != test_func_instance) { + pr_err("FAIL: kprobe post_handler not called\n"); + return -EINVAL; + } + if (!call_test_func(func, false)) + return -EINVAL; + if (pre_handler_called == test_func_instance || + post_handler_called == test_func_instance) { + pr_err("FAIL: probe called after unregistering\n"); + return -EINVAL; + } + + return 0; +} + +static void __kprobes jprobe_func(long r0, long r1) +{ + jprobe_func_called = test_func_instance; + if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2) + test_regs_ok = true; + jprobe_return(); +} + +static struct jprobe the_jprobe = { + .entry = jprobe_func, +}; + +static int test_jprobe(long (*func)(long, long)) +{ + int ret; + + the_jprobe.kp.addr = (kprobe_opcode_t *)func; + ret = register_jprobe(&the_jprobe); + if (ret < 0) { + pr_err("FAIL: register_jprobe failed with %d\n", ret); + return ret; + } + + ret = call_test_func(func, true); + + unregister_jprobe(&the_jprobe); + the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */ + + if (!ret) + return -EINVAL; + if (jprobe_func_called != test_func_instance) { + pr_err("FAIL: jprobe handler function not called\n"); + return -EINVAL; + } + if (!call_test_func(func, false)) + return -EINVAL; + if (jprobe_func_called == test_func_instance) { + pr_err("FAIL: probe called after unregistering\n"); + return -EINVAL; + } + + return 0; +} + +static int __kprobes +kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs) +{ + kretprobe_handler_called = test_func_instance; + if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2) + test_regs_ok = true; + return 0; +} + +static struct kretprobe the_kretprobe = { + .handler = kretprobe_handler, +}; + +static int test_kretprobe(long (*func)(long, long)) +{ + int ret; + + the_kretprobe.kp.addr = (kprobe_opcode_t *)func; + ret = register_kretprobe(&the_kretprobe); + if (ret < 0) { + pr_err("FAIL: register_kretprobe failed with %d\n", ret); + return ret; + } + + ret = call_test_func(func, true); + + unregister_kretprobe(&the_kretprobe); + the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */ + + if (!ret) + return -EINVAL; + if (kretprobe_handler_called != test_func_instance) { + pr_err("FAIL: kretprobe handler not called\n"); + return -EINVAL; + } + if (!call_test_func(func, false)) + return -EINVAL; + if (jprobe_func_called == test_func_instance) { + pr_err("FAIL: kretprobe called after unregistering\n"); + return -EINVAL; + } + + return 0; +} + +static int run_api_tests(long (*func)(long, long)) +{ + int ret; + + pr_info(" kprobe\n"); + ret = test_kprobe(func); + if (ret < 0) + return ret; + + pr_info(" jprobe\n"); + ret = test_jprobe(func); + if (ret < 0) + return ret; + + pr_info(" kretprobe\n"); + ret = test_kretprobe(func); + if (ret < 0) + return ret; + + return 0; +} + + +/* + * Benchmarking + */ + +#if BENCHMARKING + +static void __naked benchmark_nop(void) +{ + __asm__ __volatile__ ( + "nop \n\t" + "bx lr" + ); +} + +#ifdef CONFIG_THUMB2_KERNEL +#define wide ".w" +#else +#define wide +#endif + +static void __naked benchmark_pushpop1(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r3-r11,lr} \n\t" + "ldmia"wide" sp!, {r3-r11,pc}" + ); +} + +static void __naked benchmark_pushpop2(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r0-r8,lr} \n\t" + "ldmia"wide" sp!, {r0-r8,pc}" + ); +} + +static void __naked benchmark_pushpop3(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r4,lr} \n\t" + "ldmia"wide" sp!, {r4,pc}" + ); +} + +static void __naked benchmark_pushpop4(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r0,lr} \n\t" + "ldmia"wide" sp!, {r0,pc}" + ); +} + + +#ifdef CONFIG_THUMB2_KERNEL + +static void __naked benchmark_pushpop_thumb(void) +{ + __asm__ __volatile__ ( + "push.n {r0-r7,lr} \n\t" + "pop.n {r0-r7,pc}" + ); +} + +#endif + +static int __kprobes +benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + return 0; +} + +static int benchmark(void(*fn)(void)) +{ + unsigned n, i, t, t0; + + for (n = 1000; ; n *= 2) { + t0 = sched_clock(); + for (i = n; i > 0; --i) + fn(); + t = sched_clock() - t0; + if (t >= 250000000) + break; /* Stop once we took more than 0.25 seconds */ + } + return t / n; /* Time for one iteration in nanoseconds */ +}; + +static int kprobe_benchmark(void(*fn)(void), unsigned offset) +{ + struct kprobe k = { + .addr = (kprobe_opcode_t *)((uintptr_t)fn + offset), + .pre_handler = benchmark_pre_handler, + }; + + int ret = register_kprobe(&k); + if (ret < 0) { + pr_err("FAIL: register_kprobe failed with %d\n", ret); + return ret; + } + + ret = benchmark(fn); + + unregister_kprobe(&k); + return ret; +}; + +struct benchmarks { + void (*fn)(void); + unsigned offset; + const char *title; +}; + +static int run_benchmarks(void) +{ + int ret; + struct benchmarks list[] = { + {&benchmark_nop, 0, "nop"}, + /* + * benchmark_pushpop{1,3} will have the optimised + * instruction emulation, whilst benchmark_pushpop{2,4} will + * be the equivalent unoptimised instructions. + */ + {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"}, + {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"}, + {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"}, + {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"}, + {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"}, + {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"}, + {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"}, + {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"}, +#ifdef CONFIG_THUMB2_KERNEL + {&benchmark_pushpop_thumb, 0, "push.n {r0-r7,lr}"}, + {&benchmark_pushpop_thumb, 2, "pop.n {r0-r7,pc}"}, +#endif + {0} + }; + + struct benchmarks *b; + for (b = list; b->fn; ++b) { + ret = kprobe_benchmark(b->fn, b->offset); + if (ret < 0) + return ret; + pr_info(" %dns for kprobe %s\n", ret, b->title); + } + + pr_info("\n"); + return 0; +} + +#endif /* BENCHMARKING */ + + +/* + * Decoding table self-consistency tests + */ + +static const int decode_struct_sizes[NUM_DECODE_TYPES] = { + [DECODE_TYPE_TABLE] = sizeof(struct decode_table), + [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom), + [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate), + [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate), + [DECODE_TYPE_OR] = sizeof(struct decode_or), + [DECODE_TYPE_REJECT] = sizeof(struct decode_reject) +}; + +static int table_iter(const union decode_item *table, + int (*fn)(const struct decode_header *, void *), + void *args) +{ + const struct decode_header *h = (struct decode_header *)table; + int result; + + for (;;) { + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + + if (type == DECODE_TYPE_END) + return 0; + + result = fn(h, args); + if (result) + return result; + + h = (struct decode_header *) + ((uintptr_t)h + decode_struct_sizes[type]); + + } +} + +static int table_test_fail(const struct decode_header *h, const char* message) +{ + + pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n", + message, h->mask.bits, h->value.bits); + return -EINVAL; +} + +struct table_test_args { + const union decode_item *root_table; + u32 parent_mask; + u32 parent_value; +}; + +static int table_test_fn(const struct decode_header *h, void *args) +{ + struct table_test_args *a = (struct table_test_args *)args; + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + + if (h->value.bits & ~h->mask.bits) + return table_test_fail(h, "Match value has bits not in mask"); + + if ((h->mask.bits & a->parent_mask) != a->parent_mask) + return table_test_fail(h, "Mask has bits not in parent mask"); + + if ((h->value.bits ^ a->parent_value) & a->parent_mask) + return table_test_fail(h, "Value is inconsistent with parent"); + + if (type == DECODE_TYPE_TABLE) { + struct decode_table *d = (struct decode_table *)h; + struct table_test_args args2 = *a; + args2.parent_mask = h->mask.bits; + args2.parent_value = h->value.bits; + return table_iter(d->table.table, table_test_fn, &args2); + } + + return 0; +} + +static int table_test(const union decode_item *table) +{ + struct table_test_args args = { + .root_table = table, + .parent_mask = 0, + .parent_value = 0 + }; + return table_iter(args.root_table, table_test_fn, &args); +} + + +/* + * Decoding table test coverage analysis + * + * coverage_start() builds a coverage_table which contains a list of + * coverage_entry's to match each entry in the specified kprobes instruction + * decoding table. + * + * When test cases are run, coverage_add() is called to process each case. + * This looks up the corresponding entry in the coverage_table and sets it as + * being matched, as well as clearing the regs flag appropriate for the test. + * + * After all test cases have been run, coverage_end() is called to check that + * all entries in coverage_table have been matched and that all regs flags are + * cleared. I.e. that all possible combinations of instructions described by + * the kprobes decoding tables have had a test case executed for them. + */ + +bool coverage_fail; + +#define MAX_COVERAGE_ENTRIES 256 + +struct coverage_entry { + const struct decode_header *header; + unsigned regs; + unsigned nesting; + char matched; +}; + +struct coverage_table { + struct coverage_entry *base; + unsigned num_entries; + unsigned nesting; +}; + +struct coverage_table coverage; + +#define COVERAGE_ANY_REG (1<<0) +#define COVERAGE_SP (1<<1) +#define COVERAGE_PC (1<<2) +#define COVERAGE_PCWB (1<<3) + +static const char coverage_register_lookup[16] = { + [REG_TYPE_ANY] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC, + [REG_TYPE_SAMEAS16] = COVERAGE_ANY_REG, + [REG_TYPE_SP] = COVERAGE_SP, + [REG_TYPE_PC] = COVERAGE_PC, + [REG_TYPE_NOSP] = COVERAGE_ANY_REG | COVERAGE_SP, + [REG_TYPE_NOSPPC] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC, + [REG_TYPE_NOPC] = COVERAGE_ANY_REG | COVERAGE_PC, + [REG_TYPE_NOPCWB] = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB, + [REG_TYPE_NOPCX] = COVERAGE_ANY_REG, + [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP, +}; + +unsigned coverage_start_registers(const struct decode_header *h) +{ + unsigned regs = 0; + int i; + for (i = 0; i < 20; i += 4) { + int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf; + regs |= coverage_register_lookup[r] << i; + } + return regs; +} + +static int coverage_start_fn(const struct decode_header *h, void *args) +{ + struct coverage_table *coverage = (struct coverage_table *)args; + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + struct coverage_entry *entry = coverage->base + coverage->num_entries; + + if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) { + pr_err("FAIL: Out of space for test coverage data"); + return -ENOMEM; + } + + ++coverage->num_entries; + + entry->header = h; + entry->regs = coverage_start_registers(h); + entry->nesting = coverage->nesting; + entry->matched = false; + + if (type == DECODE_TYPE_TABLE) { + struct decode_table *d = (struct decode_table *)h; + int ret; + ++coverage->nesting; + ret = table_iter(d->table.table, coverage_start_fn, coverage); + --coverage->nesting; + return ret; + } + + return 0; +} + +static int coverage_start(const union decode_item *table) +{ + coverage.base = kmalloc(MAX_COVERAGE_ENTRIES * + sizeof(struct coverage_entry), GFP_KERNEL); + coverage.num_entries = 0; + coverage.nesting = 0; + return table_iter(table, coverage_start_fn, &coverage); +} + +static void +coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn) +{ + int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS; + int i; + for (i = 0; i < 20; i += 4) { + enum decode_reg_type reg_type = (regs >> i) & 0xf; + int reg = (insn >> i) & 0xf; + int flag; + + if (!reg_type) + continue; + + if (reg == 13) + flag = COVERAGE_SP; + else if (reg == 15) + flag = COVERAGE_PC; + else + flag = COVERAGE_ANY_REG; + entry->regs &= ~(flag << i); + + switch (reg_type) { + + case REG_TYPE_NONE: + case REG_TYPE_ANY: + case REG_TYPE_SAMEAS16: + break; + + case REG_TYPE_SP: + if (reg != 13) + return; + break; + + case REG_TYPE_PC: + if (reg != 15) + return; + break; + + case REG_TYPE_NOSP: + if (reg == 13) + return; + break; + + case REG_TYPE_NOSPPC: + case REG_TYPE_NOSPPCX: + if (reg == 13 || reg == 15) + return; + break; + + case REG_TYPE_NOPCWB: + if (!is_writeback(insn)) + break; + if (reg == 15) { + entry->regs &= ~(COVERAGE_PCWB << i); + return; + } + break; + + case REG_TYPE_NOPC: + case REG_TYPE_NOPCX: + if (reg == 15) + return; + break; + } + + } +} + +static void coverage_add(kprobe_opcode_t insn) +{ + struct coverage_entry *entry = coverage.base; + struct coverage_entry *end = coverage.base + coverage.num_entries; + bool matched = false; + unsigned nesting = 0; + + for (; entry < end; ++entry) { + const struct decode_header *h = entry->header; + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + + if (entry->nesting > nesting) + continue; /* Skip sub-table we didn't match */ + + if (entry->nesting < nesting) + break; /* End of sub-table we were scanning */ + + if (!matched) { + if ((insn & h->mask.bits) != h->value.bits) + continue; + entry->matched = true; + } + + switch (type) { + + case DECODE_TYPE_TABLE: + ++nesting; + break; + + case DECODE_TYPE_CUSTOM: + case DECODE_TYPE_SIMULATE: + case DECODE_TYPE_EMULATE: + coverage_add_registers(entry, insn); + return; + + case DECODE_TYPE_OR: + matched = true; + break; + + case DECODE_TYPE_REJECT: + default: + return; + } + + } +} + +static void coverage_end(void) +{ + struct coverage_entry *entry = coverage.base; + struct coverage_entry *end = coverage.base + coverage.num_entries; + + for (; entry < end; ++entry) { + u32 mask = entry->header->mask.bits; + u32 value = entry->header->value.bits; + + if (entry->regs) { + pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n", + mask, value, entry->regs); + coverage_fail = true; + } + if (!entry->matched) { + pr_err("FAIL: Test coverage entry missing for %08x %08x\n", + mask, value); + coverage_fail = true; + } + } + + kfree(coverage.base); +} + + +/* + * Framework for instruction set test cases + */ + +void __naked __kprobes_test_case_start(void) +{ + __asm__ __volatile__ ( + "stmdb sp!, {r4-r11} \n\t" + "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" + "bic r0, lr, #1 @ r0 = inline title string \n\t" + "mov r1, sp \n\t" + "bl kprobes_test_case_start \n\t" + "bx r0 \n\t" + ); +} + +#ifndef CONFIG_THUMB2_KERNEL + +void __naked __kprobes_test_case_end_32(void) +{ + __asm__ __volatile__ ( + "mov r4, lr \n\t" + "bl kprobes_test_case_end \n\t" + "cmp r0, #0 \n\t" + "movne pc, r0 \n\t" + "mov r0, r4 \n\t" + "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" + "ldmia sp!, {r4-r11} \n\t" + "mov pc, r0 \n\t" + ); +} + +#else /* CONFIG_THUMB2_KERNEL */ + +void __naked __kprobes_test_case_end_16(void) +{ + __asm__ __volatile__ ( + "mov r4, lr \n\t" + "bl kprobes_test_case_end \n\t" + "cmp r0, #0 \n\t" + "bxne r0 \n\t" + "mov r0, r4 \n\t" + "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" + "ldmia sp!, {r4-r11} \n\t" + "bx r0 \n\t" + ); +} + +void __naked __kprobes_test_case_end_32(void) +{ + __asm__ __volatile__ ( + ".arm \n\t" + "orr lr, lr, #1 @ will return to Thumb code \n\t" + "ldr pc, 1f \n\t" + "1: \n\t" + ".word __kprobes_test_case_end_16 \n\t" + ); +} + +#endif + + +int kprobe_test_flags; +int kprobe_test_cc_position; + +static int test_try_count; +static int test_pass_count; +static int test_fail_count; + +static struct pt_regs initial_regs; +static struct pt_regs expected_regs; +static struct pt_regs result_regs; + +static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)]; + +static const char *current_title; +static struct test_arg *current_args; +static u32 *current_stack; +static uintptr_t current_branch_target; + +static uintptr_t current_code_start; +static kprobe_opcode_t current_instruction; + + +#define TEST_CASE_PASSED -1 +#define TEST_CASE_FAILED -2 + +static int test_case_run_count; +static bool test_case_is_thumb; +static int test_instance; + +/* + * We ignore the state of the imprecise abort disable flag (CPSR.A) because this + * can change randomly as the kernel doesn't take care to preserve or initialise + * this across context switches. Also, with Security Extentions, the flag may + * not be under control of the kernel; for this reason we ignore the state of + * the FIQ disable flag CPSR.F as well. + */ +#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT) + +static unsigned long test_check_cc(int cc, unsigned long cpsr) +{ + unsigned long temp; + + switch (cc) { + case 0x0: /* eq */ + return cpsr & PSR_Z_BIT; + + case 0x1: /* ne */ + return (~cpsr) & PSR_Z_BIT; + + case 0x2: /* cs */ + return cpsr & PSR_C_BIT; + + case 0x3: /* cc */ + return (~cpsr) & PSR_C_BIT; + + case 0x4: /* mi */ + return cpsr & PSR_N_BIT; + + case 0x5: /* pl */ + return (~cpsr) & PSR_N_BIT; + + case 0x6: /* vs */ + return cpsr & PSR_V_BIT; + + case 0x7: /* vc */ + return (~cpsr) & PSR_V_BIT; + + case 0x8: /* hi */ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return cpsr & PSR_C_BIT; + + case 0x9: /* ls */ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return (~cpsr) & PSR_C_BIT; + + case 0xa: /* ge */ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return (~cpsr) & PSR_N_BIT; + + case 0xb: /* lt */ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return cpsr & PSR_N_BIT; + + case 0xc: /* gt */ + temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return (~temp) & PSR_N_BIT; + + case 0xd: /* le */ + temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return temp & PSR_N_BIT; + + case 0xe: /* al */ + case 0xf: /* unconditional */ + return true; + } + BUG(); + return false; +} + +static int is_last_scenario; +static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */ +static int memory_needs_checking; + +static unsigned long test_context_cpsr(int scenario) +{ + unsigned long cpsr; + + probe_should_run = 1; + + /* Default case is that we cycle through 16 combinations of flags */ + cpsr = (scenario & 0xf) << 28; /* N,Z,C,V flags */ + cpsr |= (scenario & 0xf) << 16; /* GE flags */ + cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */ + + if (!test_case_is_thumb) { + /* Testing ARM code */ + probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0; + if (scenario == 15) + is_last_scenario = true; + + } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) { + /* Testing Thumb code without setting ITSTATE */ + if (kprobe_test_cc_position) { + int cc = (current_instruction >> kprobe_test_cc_position) & 0xf; + probe_should_run = test_check_cc(cc, cpsr) != 0; + } + + if (scenario == 15) + is_last_scenario = true; + + } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) { + /* Testing Thumb code with all combinations of ITSTATE */ + unsigned x = (scenario >> 4); + unsigned cond_base = x % 7; /* ITSTATE<7:5> */ + unsigned mask = x / 7 + 2; /* ITSTATE<4:0>, bits reversed */ + + if (mask > 0x1f) { + /* Finish by testing state from instruction 'itt al' */ + cond_base = 7; + mask = 0x4; + if ((scenario & 0xf) == 0xf) + is_last_scenario = true; + } + + cpsr |= cond_base << 13; /* ITSTATE<7:5> */ + cpsr |= (mask & 0x1) << 12; /* ITSTATE<4> */ + cpsr |= (mask & 0x2) << 10; /* ITSTATE<3> */ + cpsr |= (mask & 0x4) << 8; /* ITSTATE<2> */ + cpsr |= (mask & 0x8) << 23; /* ITSTATE<1> */ + cpsr |= (mask & 0x10) << 21; /* ITSTATE<0> */ + + probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0; + + } else { + /* Testing Thumb code with several combinations of ITSTATE */ + switch (scenario) { + case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */ + cpsr = 0x00000800; + probe_should_run = 0; + break; + case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */ + cpsr = 0xf0007800; + probe_should_run = 0; + break; + case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */ + cpsr = 0x00009800; + break; + case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */ + cpsr = 0xf0002800; + is_last_scenario = true; + break; + } + } + + return cpsr; +} + +static void setup_test_context(struct pt_regs *regs) +{ + int scenario = test_case_run_count>>1; + unsigned long val; + struct test_arg *args; + int i; + + is_last_scenario = false; + memory_needs_checking = false; + + /* Initialise test memory on stack */ + val = (scenario & 1) ? VALM : ~VALM; + for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i) + current_stack[i] = val + (i << 8); + /* Put target of branch on stack for tests which load PC from memory */ + if (current_branch_target) + current_stack[15] = current_branch_target; + /* Put a value for SP on stack for tests which load SP from memory */ + current_stack[13] = (u32)current_stack + 120; + + /* Initialise register values to their default state */ + val = (scenario & 2) ? VALR : ~VALR; + for (i = 0; i < 13; ++i) + regs->uregs[i] = val ^ (i << 8); + regs->ARM_lr = val ^ (14 << 8); + regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK); + regs->ARM_cpsr |= test_context_cpsr(scenario); + + /* Perform testcase specific register setup */ + args = current_args; + for (; args[0].type != ARG_TYPE_END; ++args) + switch (args[0].type) { + case ARG_TYPE_REG: { + struct test_arg_regptr *arg = + (struct test_arg_regptr *)args; + regs->uregs[arg->reg] = arg->val; + break; + } + case ARG_TYPE_PTR: { + struct test_arg_regptr *arg = + (struct test_arg_regptr *)args; + regs->uregs[arg->reg] = + (unsigned long)current_stack + arg->val; + memory_needs_checking = true; + break; + } + case ARG_TYPE_MEM: { + struct test_arg_mem *arg = (struct test_arg_mem *)args; + current_stack[arg->index] = arg->val; + break; + } + default: + break; + } +} + +struct test_probe { + struct kprobe kprobe; + bool registered; + int hit; +}; + +static void unregister_test_probe(struct test_probe *probe) +{ + if (probe->registered) { + unregister_kprobe(&probe->kprobe); + probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */ + } + probe->registered = false; +} + +static int register_test_probe(struct test_probe *probe) +{ + int ret; + + if (probe->registered) + BUG(); + + ret = register_kprobe(&probe->kprobe); + if (ret >= 0) { + probe->registered = true; + probe->hit = -1; + } + return ret; +} + +static int __kprobes +test_before_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + container_of(p, struct test_probe, kprobe)->hit = test_instance; + return 0; +} + +static void __kprobes +test_before_post_handler(struct kprobe *p, struct pt_regs *regs, + unsigned long flags) +{ + setup_test_context(regs); + initial_regs = *regs; + initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS; +} + +static int __kprobes +test_case_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + container_of(p, struct test_probe, kprobe)->hit = test_instance; + return 0; +} + +static int __kprobes +test_after_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + if (container_of(p, struct test_probe, kprobe)->hit == test_instance) + return 0; /* Already run for this test instance */ + + result_regs = *regs; + result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS; + + /* Undo any changes done to SP by the test case */ + regs->ARM_sp = (unsigned long)current_stack; + + container_of(p, struct test_probe, kprobe)->hit = test_instance; + return 0; +} + +static struct test_probe test_before_probe = { + .kprobe.pre_handler = test_before_pre_handler, + .kprobe.post_handler = test_before_post_handler, +}; + +static struct test_probe test_case_probe = { + .kprobe.pre_handler = test_case_pre_handler, +}; + +static struct test_probe test_after_probe = { + .kprobe.pre_handler = test_after_pre_handler, +}; + +static struct test_probe test_after2_probe = { + .kprobe.pre_handler = test_after_pre_handler, +}; + +static void test_case_cleanup(void) +{ + unregister_test_probe(&test_before_probe); + unregister_test_probe(&test_case_probe); + unregister_test_probe(&test_after_probe); + unregister_test_probe(&test_after2_probe); +} + +static void print_registers(struct pt_regs *regs) +{ + pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n", + regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n", + regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7); + pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n", + regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp); + pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n", + regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc); + pr_err("cpsr %08lx\n", regs->ARM_cpsr); +} + +static void print_memory(u32 *mem, size_t size) +{ + int i; + for (i = 0; i < size / sizeof(u32); i += 4) + pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1], + mem[i+2], mem[i+3]); +} + +static size_t expected_memory_size(u32 *sp) +{ + size_t size = sizeof(expected_memory); + int offset = (uintptr_t)sp - (uintptr_t)current_stack; + if (offset > 0) + size -= offset; + return size; +} + +static void test_case_failed(const char *message) +{ + test_case_cleanup(); + + pr_err("FAIL: %s\n", message); + pr_err("FAIL: Test %s\n", current_title); + pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1); +} + +static unsigned long next_instruction(unsigned long pc) +{ +#ifdef CONFIG_THUMB2_KERNEL + if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1))) + return pc + 2; + else +#endif + return pc + 4; +} + +static uintptr_t __used kprobes_test_case_start(const char *title, void *stack) +{ + struct test_arg *args; + struct test_arg_end *end_arg; + unsigned long test_code; + + args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4); + + current_title = title; + current_args = args; + current_stack = stack; + + ++test_try_count; + + while (args->type != ARG_TYPE_END) + ++args; + end_arg = (struct test_arg_end *)args; + + test_code = (unsigned long)(args + 1); /* Code starts after args */ + + test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB; + if (test_case_is_thumb) + test_code |= 1; + + current_code_start = test_code; + + current_branch_target = 0; + if (end_arg->branch_offset != end_arg->end_offset) + current_branch_target = test_code + end_arg->branch_offset; + + test_code += end_arg->code_offset; + test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code; + + test_code = next_instruction(test_code); + test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code; + + if (test_case_is_thumb) { + u16 *p = (u16 *)(test_code & ~1); + current_instruction = p[0]; + if (is_wide_instruction(current_instruction)) { + current_instruction <<= 16; + current_instruction |= p[1]; + } + } else { + current_instruction = *(u32 *)test_code; + } + + if (current_title[0] == '.') + verbose("%s\n", current_title); + else + verbose("%s\t@ %0*x\n", current_title, + test_case_is_thumb ? 4 : 8, + current_instruction); + + test_code = next_instruction(test_code); + test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code; + + if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) { + if (!test_case_is_thumb || + is_wide_instruction(current_instruction)) { + test_case_failed("expected 16-bit instruction"); + goto fail; + } + } else { + if (test_case_is_thumb && + !is_wide_instruction(current_instruction)) { + test_case_failed("expected 32-bit instruction"); + goto fail; + } + } + + coverage_add(current_instruction); + + if (end_arg->flags & ARG_FLAG_UNSUPPORTED) { + if (register_test_probe(&test_case_probe) < 0) + goto pass; + test_case_failed("registered probe for unsupported instruction"); + goto fail; + } + + if (end_arg->flags & ARG_FLAG_SUPPORTED) { + if (register_test_probe(&test_case_probe) >= 0) + goto pass; + test_case_failed("couldn't register probe for supported instruction"); + goto fail; + } + + if (register_test_probe(&test_before_probe) < 0) { + test_case_failed("register test_before_probe failed"); + goto fail; + } + if (register_test_probe(&test_after_probe) < 0) { + test_case_failed("register test_after_probe failed"); + goto fail; + } + if (current_branch_target) { + test_after2_probe.kprobe.addr = + (kprobe_opcode_t *)current_branch_target; + if (register_test_probe(&test_after2_probe) < 0) { + test_case_failed("register test_after2_probe failed"); + goto fail; + } + } + + /* Start first run of test case */ + test_case_run_count = 0; + ++test_instance; + return current_code_start; +pass: + test_case_run_count = TEST_CASE_PASSED; + return (uintptr_t)test_after_probe.kprobe.addr; +fail: + test_case_run_count = TEST_CASE_FAILED; + return (uintptr_t)test_after_probe.kprobe.addr; +} + +static bool check_test_results(void) +{ + size_t mem_size = 0; + u32 *mem = 0; + + if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) { + test_case_failed("registers differ"); + goto fail; + } + + if (memory_needs_checking) { + mem = (u32 *)result_regs.ARM_sp; + mem_size = expected_memory_size(mem); + if (memcmp(expected_memory, mem, mem_size)) { + test_case_failed("test memory differs"); + goto fail; + } + } + + return true; + +fail: + pr_err("initial_regs:\n"); + print_registers(&initial_regs); + pr_err("expected_regs:\n"); + print_registers(&expected_regs); + pr_err("result_regs:\n"); + print_registers(&result_regs); + + if (mem) { + pr_err("current_stack=%p\n", current_stack); + pr_err("expected_memory:\n"); + print_memory(expected_memory, mem_size); + pr_err("result_memory:\n"); + print_memory(mem, mem_size); + } + + return false; +} + +static uintptr_t __used kprobes_test_case_end(void) +{ + if (test_case_run_count < 0) { + if (test_case_run_count == TEST_CASE_PASSED) + /* kprobes_test_case_start did all the needed testing */ + goto pass; + else + /* kprobes_test_case_start failed */ + goto fail; + } + + if (test_before_probe.hit != test_instance) { + test_case_failed("test_before_handler not run"); + goto fail; + } + + if (test_after_probe.hit != test_instance && + test_after2_probe.hit != test_instance) { + test_case_failed("test_after_handler not run"); + goto fail; + } + + /* + * Even numbered test runs ran without a probe on the test case so + * we can gather reference results. The subsequent odd numbered run + * will have the probe inserted. + */ + if ((test_case_run_count & 1) == 0) { + /* Save results from run without probe */ + u32 *mem = (u32 *)result_regs.ARM_sp; + expected_regs = result_regs; + memcpy(expected_memory, mem, expected_memory_size(mem)); + + /* Insert probe onto test case instruction */ + if (register_test_probe(&test_case_probe) < 0) { + test_case_failed("register test_case_probe failed"); + goto fail; + } + } else { + /* Check probe ran as expected */ + if (probe_should_run == 1) { + if (test_case_probe.hit != test_instance) { + test_case_failed("test_case_handler not run"); + goto fail; + } + } else if (probe_should_run == 0) { + if (test_case_probe.hit == test_instance) { + test_case_failed("test_case_handler ran"); + goto fail; + } + } + + /* Remove probe for any subsequent reference run */ + unregister_test_probe(&test_case_probe); + + if (!check_test_results()) + goto fail; + + if (is_last_scenario) + goto pass; + } + + /* Do next test run */ + ++test_case_run_count; + ++test_instance; + return current_code_start; +fail: + ++test_fail_count; + goto end; +pass: + ++test_pass_count; +end: + test_case_cleanup(); + return 0; +} + + +/* + * Top level test functions + */ + +static int run_test_cases(void (*tests)(void), const union decode_item *table) +{ + int ret; + + pr_info(" Check decoding tables\n"); + ret = table_test(table); + if (ret) + return ret; + + pr_info(" Run test cases\n"); + ret = coverage_start(table); + if (ret) + return ret; + + tests(); + + coverage_end(); + return 0; +} + + +static int __init run_all_tests(void) +{ + int ret = 0; + + pr_info("Begining kprobe tests...\n"); + +#ifndef CONFIG_THUMB2_KERNEL + + pr_info("Probe ARM code\n"); + ret = run_api_tests(arm_func); + if (ret) + goto out; + + pr_info("ARM instruction simulation\n"); + ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table); + if (ret) + goto out; + +#else /* CONFIG_THUMB2_KERNEL */ + + pr_info("Probe 16-bit Thumb code\n"); + ret = run_api_tests(thumb16_func); + if (ret) + goto out; + + pr_info("Probe 32-bit Thumb code, even halfword\n"); + ret = run_api_tests(thumb32even_func); + if (ret) + goto out; + + pr_info("Probe 32-bit Thumb code, odd halfword\n"); + ret = run_api_tests(thumb32odd_func); + if (ret) + goto out; + + pr_info("16-bit Thumb instruction simulation\n"); + ret = run_test_cases(kprobe_thumb16_test_cases, + kprobe_decode_thumb16_table); + if (ret) + goto out; + + pr_info("32-bit Thumb instruction simulation\n"); + ret = run_test_cases(kprobe_thumb32_test_cases, + kprobe_decode_thumb32_table); + if (ret) + goto out; +#endif + + pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n", + test_try_count, test_pass_count, test_fail_count); + if (test_fail_count) { + ret = -EINVAL; + goto out; + } + +#if BENCHMARKING + pr_info("Benchmarks\n"); + ret = run_benchmarks(); + if (ret) + goto out; +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + /* We are able to run all test cases so coverage should be complete */ + if (coverage_fail) { + pr_err("FAIL: Test coverage checks failed\n"); + ret = -EINVAL; + goto out; + } +#endif + +out: + if (ret == 0) + pr_info("Finished kprobe tests OK\n"); + else + pr_err("kprobe tests failed\n"); + + return ret; +} + + +/* + * Module setup + */ + +#ifdef MODULE + +static void __exit kprobe_test_exit(void) +{ +} + +module_init(run_all_tests) +module_exit(kprobe_test_exit) +MODULE_LICENSE("GPL"); + +#else /* !MODULE */ + +late_initcall(run_all_tests); + +#endif diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h new file mode 100644 index 000000000000..0dc5d77b9356 --- /dev/null +++ b/arch/arm/kernel/kprobes-test.h @@ -0,0 +1,392 @@ +/* + * arch/arm/kernel/kprobes-test.h + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define VERBOSE 0 /* Set to '1' for more logging of test cases */ + +#ifdef CONFIG_THUMB2_KERNEL +#define NORMAL_ISA "16" +#else +#define NORMAL_ISA "32" +#endif + + +/* Flags used in kprobe_test_flags */ +#define TEST_FLAG_NO_ITBLOCK (1<<0) +#define TEST_FLAG_FULL_ITBLOCK (1<<1) +#define TEST_FLAG_NARROW_INSTR (1<<2) + +extern int kprobe_test_flags; +extern int kprobe_test_cc_position; + + +#define TEST_MEMORY_SIZE 256 + + +/* + * Test case structures. + * + * The arguments given to test cases can be one of three types. + * + * ARG_TYPE_REG + * Load a register with the given value. + * + * ARG_TYPE_PTR + * Load a register with a pointer into the stack buffer (SP + given value). + * + * ARG_TYPE_MEM + * Store the given value into the stack buffer at [SP+index]. + * + */ + +#define ARG_TYPE_END 0 +#define ARG_TYPE_REG 1 +#define ARG_TYPE_PTR 2 +#define ARG_TYPE_MEM 3 + +#define ARG_FLAG_UNSUPPORTED 0x01 +#define ARG_FLAG_SUPPORTED 0x02 +#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */ +#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */ + +struct test_arg { + u8 type; /* ARG_TYPE_x */ + u8 _padding[7]; +}; + +struct test_arg_regptr { + u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */ + u8 reg; + u8 _padding[2]; + u32 val; +}; + +struct test_arg_mem { + u8 type; /* ARG_TYPE_MEM */ + u8 index; + u8 _padding[2]; + u32 val; +}; + +struct test_arg_end { + u8 type; /* ARG_TYPE_END */ + u8 flags; /* ARG_FLAG_x */ + u16 code_offset; + u16 branch_offset; + u16 end_offset; +}; + + +/* + * Building blocks for test cases. + * + * Each test case is wrapped between TESTCASE_START and TESTCASE_END. + * + * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are + * used followed by a terminating TEST_ARG_END. + * + * After this, the instruction to be tested is defined with TEST_INSTRUCTION. + * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards). + * + * Some specific test cases may make use of other custom constructs. + */ + +#if VERBOSE +#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__) +#else +#define verbose(fmt, ...) +#endif + +#define TEST_GROUP(title) \ + verbose("\n"); \ + verbose(title"\n"); \ + verbose("---------------------------------------------------------\n"); + +#define TESTCASE_START(title) \ + __asm__ __volatile__ ( \ + "bl __kprobes_test_case_start \n\t" \ + /* don't use .asciz here as 'title' may be */ \ + /* multiple strings to be concatenated. */ \ + ".ascii "#title" \n\t" \ + ".byte 0 \n\t" \ + ".align 2 \n\t" + +#define TEST_ARG_REG(reg, val) \ + ".byte "__stringify(ARG_TYPE_REG)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_PTR(reg, val) \ + ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_MEM(index, val) \ + ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \ + ".byte "#index" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_END(flags) \ + ".byte "__stringify(ARG_TYPE_END)" \n\t" \ + ".byte "TEST_ISA flags" \n\t" \ + ".short 50f-0f \n\t" \ + ".short 2f-0f \n\t" \ + ".short 99f-0f \n\t" \ + ".code "TEST_ISA" \n\t" \ + "0: \n\t" + +#define TEST_INSTRUCTION(instruction) \ + "50: nop \n\t" \ + "1: "instruction" \n\t" \ + " nop \n\t" + +#define TEST_BRANCH_F(instruction, xtra_dist) \ + TEST_INSTRUCTION(instruction) \ + ".if "#xtra_dist" \n\t" \ + " b 99f \n\t" \ + ".space "#xtra_dist" \n\t" \ + ".endif \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_B(instruction, xtra_dist) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + ".if "#xtra_dist" \n\t" \ + ".space "#xtra_dist" \n\t" \ + ".endif \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TESTCASE_END \ + "2: \n\t" \ + "99: \n\t" \ + " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \ + ".code "NORMAL_ISA" \n\t" \ + : : \ + : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \ + ); + + +/* + * Macros to define test cases. + * + * Those of the form TEST_{R,P,M}* can be used to define test cases + * which take combinations of the three basic types of arguments. E.g. + * + * TEST_R One register argument + * TEST_RR Two register arguments + * TEST_RPR A register, a pointer, then a register argument + * + * For testing instructions which may branch, there are macros TEST_BF_* + * and TEST_BB_* for branching forwards and backwards. + * + * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed, + * the just verify that a kprobe is or is not allowed on the given instruction. + */ + +#define TEST(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_UNSUPPORTED(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_SUPPORTED(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg code2) \ + TESTCASE_END + +#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_REG(reg4, val4) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ + TESTCASE_END + +#define TEST_P(code1, reg1, val1, code2) \ + TESTCASE_START(code1 #reg1 code2) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2) \ + TESTCASE_END + +#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_PTR(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_PTR(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_PTR(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_BF_P(code1, reg1, val1, code2) \ + TESTCASE_START(code1 #reg1 code2) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg1 code2, 0) \ + TESTCASE_END + +#define TEST_BF_X(code, xtra_dist) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code, xtra_dist) \ + TESTCASE_END + +#define TEST_BB_X(code, xtra_dist) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code, xtra_dist) \ + TESTCASE_END + +#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg code2, xtra_dist) \ + TESTCASE_END + +#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code1 #reg code2, xtra_dist) \ + TESTCASE_END + +#define TEST_BF(code) TEST_BF_X(code, 0) +#define TEST_BB(code) TEST_BB_X(code, 0) + +#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0) +#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0) + +#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \ + TESTCASE_END + +#define TEST_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + +#define TEST_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 __stringify(reg) code2) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + +#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + + +/* Various values used in test cases... */ +#define N(val) (val ^ 0xffffffff) +#define VAL1 0x12345678 +#define VAL2 N(VAL1) +#define VAL3 0xa5f801 +#define VAL4 N(VAL3) +#define VALM 0x456789ab +#define VALR 0xdeaddead +#define HH1 0x0123fecb +#define HH2 0xa9874567 + + +#ifdef CONFIG_THUMB2_KERNEL +void kprobe_thumb16_test_cases(void); +void kprobe_thumb32_test_cases(void); +#else +void kprobe_arm_test_cases(void); +#endif diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 902ca59e8b11..8f96ec778e8d 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> +#include <linux/module.h> #include "kprobes.h" @@ -943,6 +944,9 @@ const union decode_item kprobe_decode_thumb32_table[] = { */ DECODE_END }; +#ifdef CONFIG_ARM_KPROBES_TEST_MODULE +EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table); +#endif static void __kprobes t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs) @@ -1423,6 +1427,9 @@ const union decode_item kprobe_decode_thumb16_table[] = { DECODE_END }; +#ifdef CONFIG_ARM_KPROBES_TEST_MODULE +EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table); +#endif static unsigned long __kprobes thumb_check_cc(unsigned long cpsr) { diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h index a6aeda0a6c7f..38945f78f9f1 100644 --- a/arch/arm/kernel/kprobes.h +++ b/arch/arm/kernel/kprobes.h @@ -413,6 +413,14 @@ struct decode_reject { DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0) +#ifdef CONFIG_THUMB2_KERNEL +extern const union decode_item kprobe_decode_thumb16_table[]; +extern const union decode_item kprobe_decode_thumb32_table[]; +#else +extern const union decode_item kprobe_decode_arm_table[]; +#endif + + int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi, const union decode_item *table, bool thumb16); diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e59bbd496c39..c1b4463dcc83 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -32,6 +32,24 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { + unsigned long page_list; + void *reboot_code_buffer; + page_list = image->head & PAGE_MASK; + + reboot_code_buffer = page_address(image->control_code_page); + + /* Prepare parameters for reboot_code_buffer*/ + kexec_start_address = image->start; + kexec_indirection_page = page_list; + kexec_mach_type = machine_arch_type; + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + + /* copy our kernel relocation code to the control code page */ + memcpy(reboot_code_buffer, + relocate_new_kernel, relocate_new_kernel_size); + + flush_icache_range((unsigned long) reboot_code_buffer, + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); return 0; } @@ -82,31 +100,14 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { - unsigned long page_list; unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; - - page_list = image->head & PAGE_MASK; - /* we need both effective and real address here */ reboot_code_buffer_phys = page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); - /* Prepare parameters for reboot_code_buffer*/ - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; - - /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); - - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index cc2020c2c709..1e9be5d25e56 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -33,7 +33,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK) +#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 53c9c2610cbc..e6e5d7c84f1a 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -12,6 +12,7 @@ */ #define pr_fmt(fmt) "hw perfevents: " fmt +#include <linux/bitmap.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> @@ -26,16 +27,8 @@ #include <asm/pmu.h> #include <asm/stacktrace.h> -static struct platform_device *pmu_device; - -/* - * Hardware lock to serialize accesses to PMU registers. Needed for the - * read/modify/write sequences. - */ -static DEFINE_RAW_SPINLOCK(pmu_lock); - /* - * ARMv6 supports a maximum of 3 events, starting from index 1. If we add + * ARMv6 supports a maximum of 3 events, starting from index 0. If we add * another platform that supports more, we need to increase this to be the * largest of all platforms. * @@ -43,62 +36,24 @@ static DEFINE_RAW_SPINLOCK(pmu_lock); * cycle counter CCNT + 31 events counters CNT0..30. * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. */ -#define ARMPMU_MAX_HWEVENTS 33 +#define ARMPMU_MAX_HWEVENTS 32 -/* The events for a given CPU. */ -struct cpu_hw_events { - /* - * The events that are active on the CPU for the given index. Index 0 - * is reserved. - */ - struct perf_event *events[ARMPMU_MAX_HWEVENTS]; - - /* - * A 1 bit for an index indicates that the counter is being used for - * an event. A 0 means that the counter can be used. - */ - unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; +static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); +static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); +static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); - /* - * A 1 bit for an index indicates that the counter is actively being - * used. - */ - unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; -}; -static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); - -struct arm_pmu { - enum arm_perf_pmu_ids id; - const char *name; - irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct hw_perf_event *evt, int idx); - void (*disable)(struct hw_perf_event *evt, int idx); - int (*get_event_idx)(struct cpu_hw_events *cpuc, - struct hw_perf_event *hwc); - u32 (*read_counter)(int idx); - void (*write_counter)(int idx, u32 val); - void (*start)(void); - void (*stop)(void); - void (*reset)(void *); - const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - const unsigned (*event_map)[PERF_COUNT_HW_MAX]; - u32 raw_event_mask; - int num_events; - u64 max_period; -}; +#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) /* Set at runtime when we know what CPU type we are. */ -static const struct arm_pmu *armpmu; +static struct arm_pmu *cpu_pmu; enum arm_perf_pmu_ids armpmu_get_pmu_id(void) { int id = -ENODEV; - if (armpmu != NULL) - id = armpmu->id; + if (cpu_pmu != NULL) + id = cpu_pmu->id; return id; } @@ -109,8 +64,8 @@ armpmu_get_max_events(void) { int max_events = 0; - if (armpmu != NULL) - max_events = armpmu->num_events; + if (cpu_pmu != NULL) + max_events = cpu_pmu->num_events; return max_events; } @@ -130,7 +85,11 @@ EXPORT_SYMBOL_GPL(perf_num_counters); #define CACHE_OP_UNSUPPORTED 0xFFFF static int -armpmu_map_cache_event(u64 config) +armpmu_map_cache_event(const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u64 config) { unsigned int cache_type, cache_op, cache_result, ret; @@ -146,7 +105,7 @@ armpmu_map_cache_event(u64 config) if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) return -EINVAL; - ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result]; + ret = (int)(*cache_map)[cache_type][cache_op][cache_result]; if (ret == CACHE_OP_UNSUPPORTED) return -ENOENT; @@ -155,23 +114,46 @@ armpmu_map_cache_event(u64 config) } static int -armpmu_map_event(u64 config) +armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { - int mapping = (*armpmu->event_map)[config]; - return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping; + int mapping = (*event_map)[config]; + return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; } static int -armpmu_map_raw_event(u64 config) +armpmu_map_raw_event(u32 raw_event_mask, u64 config) { - return (int)(config & armpmu->raw_event_mask); + return (int)(config & raw_event_mask); } -static int +static int map_cpu_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask) +{ + u64 config = event->attr.config; + + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + return armpmu_map_event(event_map, config); + case PERF_TYPE_HW_CACHE: + return armpmu_map_cache_event(cache_map, config); + case PERF_TYPE_RAW: + return armpmu_map_raw_event(raw_event_mask, config); + } + + return -ENOENT; +} + +int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; @@ -202,11 +184,12 @@ armpmu_event_set_period(struct perf_event *event, return ret; } -static u64 +u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, int idx, int overflow) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; again: @@ -246,11 +229,9 @@ armpmu_read(struct perf_event *event) static void armpmu_stop(struct perf_event *event, int flags) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; - if (!armpmu) - return; - /* * ARM pmu always has to update the counter, so ignore * PERF_EF_UPDATE, see comments in armpmu_start(). @@ -266,11 +247,9 @@ armpmu_stop(struct perf_event *event, int flags) static void armpmu_start(struct perf_event *event, int flags) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; - if (!armpmu) - return; - /* * ARM pmu always has to reprogram the period, so ignore * PERF_EF_RELOAD, see the comment below. @@ -293,16 +272,16 @@ armpmu_start(struct perf_event *event, int flags) static void armpmu_del(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *hw_events = armpmu->get_hw_events(); struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; WARN_ON(idx < 0); - clear_bit(idx, cpuc->active_mask); armpmu_stop(event, PERF_EF_UPDATE); - cpuc->events[idx] = NULL; - clear_bit(idx, cpuc->used_mask); + hw_events->events[idx] = NULL; + clear_bit(idx, hw_events->used_mask); perf_event_update_userpage(event); } @@ -310,7 +289,8 @@ armpmu_del(struct perf_event *event, int flags) static int armpmu_add(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *hw_events = armpmu->get_hw_events(); struct hw_perf_event *hwc = &event->hw; int idx; int err = 0; @@ -318,7 +298,7 @@ armpmu_add(struct perf_event *event, int flags) perf_pmu_disable(event->pmu); /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(cpuc, hwc); + idx = armpmu->get_event_idx(hw_events, hwc); if (idx < 0) { err = idx; goto out; @@ -330,8 +310,7 @@ armpmu_add(struct perf_event *event, int flags) */ event->hw.idx = idx; armpmu->disable(hwc, idx); - cpuc->events[idx] = event; - set_bit(idx, cpuc->active_mask); + hw_events->events[idx] = event; hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; if (flags & PERF_EF_START) @@ -345,25 +324,25 @@ out: return err; } -static struct pmu pmu; - static int -validate_event(struct cpu_hw_events *cpuc, +validate_event(struct pmu_hw_events *hw_events, struct perf_event *event) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event fake_event = event->hw; + struct pmu *leader_pmu = event->group_leader->pmu; - if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) + if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) return 1; - return armpmu->get_event_idx(cpuc, &fake_event) >= 0; + return armpmu->get_event_idx(hw_events, &fake_event) >= 0; } static int validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; - struct cpu_hw_events fake_pmu; + struct pmu_hw_events fake_pmu; memset(&fake_pmu, 0, sizeof(fake_pmu)); @@ -383,110 +362,119 @@ validate_group(struct perf_event *event) static irqreturn_t armpmu_platform_irq(int irq, void *dev) { - struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev); + struct arm_pmu *armpmu = (struct arm_pmu *) dev; + struct platform_device *plat_device = armpmu->plat_device; + struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev); return plat->handle_irq(irq, dev, armpmu->handle_irq); } +static void +armpmu_release_hardware(struct arm_pmu *armpmu) +{ + int i, irq, irqs; + struct platform_device *pmu_device = armpmu->plat_device; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + for (i = 0; i < irqs; ++i) { + if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, armpmu); + } + + release_pmu(armpmu->type); +} + static int -armpmu_reserve_hardware(void) +armpmu_reserve_hardware(struct arm_pmu *armpmu) { struct arm_pmu_platdata *plat; irq_handler_t handle_irq; - int i, err = -ENODEV, irq; + int i, err, irq, irqs; + struct platform_device *pmu_device = armpmu->plat_device; - pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); - if (IS_ERR(pmu_device)) { + err = reserve_pmu(armpmu->type); + if (err) { pr_warning("unable to reserve pmu\n"); - return PTR_ERR(pmu_device); + return err; } - init_pmu(ARM_PMU_DEVICE_CPU); - plat = dev_get_platdata(&pmu_device->dev); if (plat && plat->handle_irq) handle_irq = armpmu_platform_irq; else handle_irq = armpmu->handle_irq; - if (pmu_device->num_resources < 1) { + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { pr_err("no irqs for PMUs defined\n"); return -ENODEV; } - for (i = 0; i < pmu_device->num_resources; ++i) { + for (i = 0; i < irqs; ++i) { + err = 0; irq = platform_get_irq(pmu_device, i); if (irq < 0) continue; + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, i); + continue; + } + err = request_irq(irq, handle_irq, IRQF_DISABLED | IRQF_NOBALANCING, - "armpmu", NULL); + "arm-pmu", armpmu); if (err) { - pr_warning("unable to request IRQ%d for ARM perf " - "counters\n", irq); - break; + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + armpmu_release_hardware(armpmu); + return err; } - } - if (err) { - for (i = i - 1; i >= 0; --i) { - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, NULL); - } - release_pmu(ARM_PMU_DEVICE_CPU); - pmu_device = NULL; + cpumask_set_cpu(i, &armpmu->active_irqs); } - return err; + return 0; } static void -armpmu_release_hardware(void) +hw_perf_event_destroy(struct perf_event *event) { - int i, irq; + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + atomic_t *active_events = &armpmu->active_events; + struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex; - for (i = pmu_device->num_resources - 1; i >= 0; --i) { - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, NULL); + if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) { + armpmu_release_hardware(armpmu); + mutex_unlock(pmu_reserve_mutex); } - armpmu->stop(); - - release_pmu(ARM_PMU_DEVICE_CPU); - pmu_device = NULL; } -static atomic_t active_events = ATOMIC_INIT(0); -static DEFINE_MUTEX(pmu_reserve_mutex); - -static void -hw_perf_event_destroy(struct perf_event *event) +static int +event_requires_mode_exclusion(struct perf_event_attr *attr) { - if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) { - armpmu_release_hardware(); - mutex_unlock(&pmu_reserve_mutex); - } + return attr->exclude_idle || attr->exclude_user || + attr->exclude_kernel || attr->exclude_hv; } static int __hw_perf_event_init(struct perf_event *event) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; int mapping, err; - /* Decode the generic type into an ARM event identifier. */ - if (PERF_TYPE_HARDWARE == event->attr.type) { - mapping = armpmu_map_event(event->attr.config); - } else if (PERF_TYPE_HW_CACHE == event->attr.type) { - mapping = armpmu_map_cache_event(event->attr.config); - } else if (PERF_TYPE_RAW == event->attr.type) { - mapping = armpmu_map_raw_event(event->attr.config); - } else { - pr_debug("event type %x not supported\n", event->attr.type); - return -EOPNOTSUPP; - } + mapping = armpmu->map_event(event); if (mapping < 0) { pr_debug("event %x:%llx not supported\n", event->attr.type, @@ -495,34 +483,31 @@ __hw_perf_event_init(struct perf_event *event) } /* + * We don't assign an index until we actually place the event onto + * hardware. Use -1 to signify that we haven't decided where to put it + * yet. For SMP systems, each core has it's own PMU so we can't do any + * clever allocation or constraints checking at this point. + */ + hwc->idx = -1; + hwc->config_base = 0; + hwc->config = 0; + hwc->event_base = 0; + + /* * Check whether we need to exclude the counter from certain modes. - * The ARM performance counters are on all of the time so if someone - * has asked us for some excludes then we have to fail. */ - if (event->attr.exclude_kernel || event->attr.exclude_user || - event->attr.exclude_hv || event->attr.exclude_idle) { + if ((!armpmu->set_event_filter || + armpmu->set_event_filter(hwc, &event->attr)) && + event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); return -EPERM; } /* - * We don't assign an index until we actually place the event onto - * hardware. Use -1 to signify that we haven't decided where to put it - * yet. For SMP systems, each core has it's own PMU so we can't do any - * clever allocation or constraints checking at this point. + * Store the event encoding into the config_base field. */ - hwc->idx = -1; - - /* - * Store the event encoding into the config_base field. config and - * event_base are unused as the only 2 things we need to know are - * the event mapping and the counter to use. The counter to use is - * also the indx and the config_base is the event type. - */ - hwc->config_base = (unsigned long)mapping; - hwc->config = 0; - hwc->event_base = 0; + hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { hwc->sample_period = armpmu->max_period; @@ -542,32 +527,23 @@ __hw_perf_event_init(struct perf_event *event) static int armpmu_event_init(struct perf_event *event) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); int err = 0; + atomic_t *active_events = &armpmu->active_events; - switch (event->attr.type) { - case PERF_TYPE_RAW: - case PERF_TYPE_HARDWARE: - case PERF_TYPE_HW_CACHE: - break; - - default: + if (armpmu->map_event(event) == -ENOENT) return -ENOENT; - } - - if (!armpmu) - return -ENODEV; event->destroy = hw_perf_event_destroy; - if (!atomic_inc_not_zero(&active_events)) { - mutex_lock(&pmu_reserve_mutex); - if (atomic_read(&active_events) == 0) { - err = armpmu_reserve_hardware(); - } + if (!atomic_inc_not_zero(active_events)) { + mutex_lock(&armpmu->reserve_mutex); + if (atomic_read(active_events) == 0) + err = armpmu_reserve_hardware(armpmu); if (!err) - atomic_inc(&active_events); - mutex_unlock(&pmu_reserve_mutex); + atomic_inc(active_events); + mutex_unlock(&armpmu->reserve_mutex); } if (err) @@ -582,22 +558,9 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { - /* Enable all of the perf events on hardware. */ - int idx, enabled = 0; - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - - if (!armpmu) - return; - - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - - if (!event) - continue; - - armpmu->enable(&event->hw, idx); - enabled = 1; - } + struct arm_pmu *armpmu = to_arm_pmu(pmu); + struct pmu_hw_events *hw_events = armpmu->get_hw_events(); + int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); if (enabled) armpmu->start(); @@ -605,20 +568,32 @@ static void armpmu_enable(struct pmu *pmu) static void armpmu_disable(struct pmu *pmu) { - if (armpmu) - armpmu->stop(); + struct arm_pmu *armpmu = to_arm_pmu(pmu); + armpmu->stop(); } -static struct pmu pmu = { - .pmu_enable = armpmu_enable, - .pmu_disable = armpmu_disable, - .event_init = armpmu_event_init, - .add = armpmu_add, - .del = armpmu_del, - .start = armpmu_start, - .stop = armpmu_stop, - .read = armpmu_read, -}; +static void __init armpmu_init(struct arm_pmu *armpmu) +{ + atomic_set(&armpmu->active_events, 0); + mutex_init(&armpmu->reserve_mutex); + + armpmu->pmu = (struct pmu) { + .pmu_enable = armpmu_enable, + .pmu_disable = armpmu_disable, + .event_init = armpmu_event_init, + .add = armpmu_add, + .del = armpmu_del, + .start = armpmu_start, + .stop = armpmu_stop, + .read = armpmu_read, + }; +} + +int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type) +{ + armpmu_init(armpmu); + return perf_pmu_register(&armpmu->pmu, name, type); +} /* Include the PMU-specific implementations. */ #include "perf_event_xscale.c" @@ -630,14 +605,72 @@ static struct pmu pmu = { * This requires SMP to be available, so exists as a separate initcall. */ static int __init -armpmu_reset(void) +cpu_pmu_reset(void) +{ + if (cpu_pmu && cpu_pmu->reset) + return on_each_cpu(cpu_pmu->reset, NULL, 1); + return 0; +} +arch_initcall(cpu_pmu_reset); + +/* + * PMU platform driver and devicetree bindings. + */ +static struct of_device_id armpmu_of_device_ids[] = { + {.compatible = "arm,cortex-a9-pmu"}, + {.compatible = "arm,cortex-a8-pmu"}, + {.compatible = "arm,arm1136-pmu"}, + {.compatible = "arm,arm1176-pmu"}, + {}, +}; + +static struct platform_device_id armpmu_plat_device_ids[] = { + {.name = "arm-pmu"}, + {}, +}; + +static int __devinit armpmu_device_probe(struct platform_device *pdev) { - if (armpmu && armpmu->reset) - return on_each_cpu(armpmu->reset, NULL, 1); + cpu_pmu->plat_device = pdev; return 0; } -arch_initcall(armpmu_reset); +static struct platform_driver armpmu_driver = { + .driver = { + .name = "arm-pmu", + .of_match_table = armpmu_of_device_ids, + }, + .probe = armpmu_device_probe, + .id_table = armpmu_plat_device_ids, +}; + +static int __init register_pmu_driver(void) +{ + return platform_driver_register(&armpmu_driver); +} +device_initcall(register_pmu_driver); + +static struct pmu_hw_events *armpmu_get_cpu_events(void) +{ + return &__get_cpu_var(cpu_hw_events); +} + +static void __init cpu_pmu_init(struct arm_pmu *armpmu) +{ + int cpu; + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); + events->events = per_cpu(hw_events, cpu); + events->used_mask = per_cpu(used_mask, cpu); + raw_spin_lock_init(&events->pmu_lock); + } + armpmu->get_hw_events = armpmu_get_cpu_events; + armpmu->type = ARM_PMU_DEVICE_CPU; +} + +/* + * CPU PMU identification and registration. + */ static int __init init_hw_perf_events(void) { @@ -651,22 +684,22 @@ init_hw_perf_events(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - armpmu = armv6pmu_init(); + cpu_pmu = armv6pmu_init(); break; case 0xB020: /* ARM11mpcore */ - armpmu = armv6mpcore_pmu_init(); + cpu_pmu = armv6mpcore_pmu_init(); break; case 0xC080: /* Cortex-A8 */ - armpmu = armv7_a8_pmu_init(); + cpu_pmu = armv7_a8_pmu_init(); break; case 0xC090: /* Cortex-A9 */ - armpmu = armv7_a9_pmu_init(); + cpu_pmu = armv7_a9_pmu_init(); break; case 0xC050: /* Cortex-A5 */ - armpmu = armv7_a5_pmu_init(); + cpu_pmu = armv7_a5_pmu_init(); break; case 0xC0F0: /* Cortex-A15 */ - armpmu = armv7_a15_pmu_init(); + cpu_pmu = armv7_a15_pmu_init(); break; } /* Intel CPUs [xscale]. */ @@ -674,23 +707,23 @@ init_hw_perf_events(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - armpmu = xscale1pmu_init(); + cpu_pmu = xscale1pmu_init(); break; case 2: - armpmu = xscale2pmu_init(); + cpu_pmu = xscale2pmu_init(); break; } } - if (armpmu) { + if (cpu_pmu) { pr_info("enabled with %s PMU driver, %d counters available\n", - armpmu->name, armpmu->num_events); + cpu_pmu->name, cpu_pmu->num_events); + cpu_pmu_init(cpu_pmu); + armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); } - perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); - return 0; } early_initcall(init_hw_perf_events); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index dd7f3b9f4cb3..e63d8115c01b 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -54,7 +54,7 @@ enum armv6_perf_types { }; enum armv6_counters { - ARMV6_CYCLE_COUNTER = 1, + ARMV6_CYCLE_COUNTER = 0, ARMV6_COUNTER0, ARMV6_COUNTER1, }; @@ -433,6 +433,7 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); if (ARMV6_CYCLE_COUNTER == idx) { mask = 0; @@ -454,12 +455,29 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, * Mask out the current event and set the counter to count the event * that we're interested in. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static int counter_is_active(unsigned long pmcr, int idx) +{ + unsigned long mask = 0; + if (idx == ARMV6_CYCLE_COUNTER) + mask = ARMV6_PMCR_CCOUNT_IEN; + else if (idx == ARMV6_COUNTER0) + mask = ARMV6_PMCR_COUNT0_IEN; + else if (idx == ARMV6_COUNTER1) + mask = ARMV6_PMCR_COUNT1_IEN; + + if (mask) + return pmcr & mask; + + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return 0; } static irqreturn_t @@ -468,7 +486,7 @@ armv6pmu_handle_irq(int irq_num, { unsigned long pmcr = armv6_pmcr_read(); struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -487,11 +505,11 @@ armv6pmu_handle_irq(int irq_num, perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) + if (!counter_is_active(pmcr, idx)) continue; /* @@ -508,7 +526,7 @@ armv6pmu_handle_irq(int irq_num, continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } /* @@ -527,28 +545,30 @@ static void armv6pmu_start(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val |= ARMV6_PMCR_ENABLE; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void armv6pmu_stop(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~ARMV6_PMCR_ENABLE; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static int -armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, +armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { /* Always place a cycle counter into the cycle counter. */ @@ -578,6 +598,7 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -598,12 +619,12 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, * of ETM bus signal assertion cycles. The external reporting should * be disabled and so this should never increment. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void @@ -611,6 +632,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, flags, evt = 0; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -627,15 +649,21 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, * Unlike UP ARMv6, we don't have a way of stopping the counters. We * simply disable the interrupt reporting. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static int armv6_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv6_perf_map, + &armv6_perf_cache_map, 0xFF); } -static const struct arm_pmu armv6pmu = { +static struct arm_pmu armv6pmu = { .id = ARM_PERF_PMU_ID_V6, .name = "v6", .handle_irq = armv6pmu_handle_irq, @@ -646,14 +674,12 @@ static const struct arm_pmu armv6pmu = { .get_event_idx = armv6pmu_get_event_idx, .start = armv6pmu_start, .stop = armv6pmu_stop, - .cache_map = &armv6_perf_cache_map, - .event_map = &armv6_perf_map, - .raw_event_mask = 0xFF, + .map_event = armv6_map_event, .num_events = 3, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__init armv6pmu_init(void) { return &armv6pmu; } @@ -665,7 +691,14 @@ static const struct arm_pmu *__init armv6pmu_init(void) * disable the interrupt reporting and update the event. When unthrottling we * reset the period and enable the interrupt reporting. */ -static const struct arm_pmu armv6mpcore_pmu = { + +static int armv6mpcore_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv6mpcore_perf_map, + &armv6mpcore_perf_cache_map, 0xFF); +} + +static struct arm_pmu armv6mpcore_pmu = { .id = ARM_PERF_PMU_ID_V6MP, .name = "v6mpcore", .handle_irq = armv6pmu_handle_irq, @@ -676,24 +709,22 @@ static const struct arm_pmu armv6mpcore_pmu = { .get_event_idx = armv6pmu_get_event_idx, .start = armv6pmu_start, .stop = armv6pmu_stop, - .cache_map = &armv6mpcore_perf_cache_map, - .event_map = &armv6mpcore_perf_map, - .raw_event_mask = 0xFF, + .map_event = armv6mpcore_map_event, .num_events = 3, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__init armv6mpcore_pmu_init(void) { return &armv6mpcore_pmu; } #else -static const struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__init armv6pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__init armv6mpcore_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4c851834f68e..1ef6d0034b85 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -17,6 +17,9 @@ */ #ifdef CONFIG_CPU_V7 + +static struct arm_pmu armv7pmu; + /* * Common ARMv7 event types * @@ -321,8 +324,8 @@ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, @@ -676,23 +679,24 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }; /* - * Perf Events counters + * Perf Events' indices */ -enum armv7_counters { - ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ - ARMV7_COUNTER0 = 2, /* First event counter */ -}; +#define ARMV7_IDX_CYCLE_COUNTER 0 +#define ARMV7_IDX_COUNTER0 1 +#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) + +#define ARMV7_MAX_COUNTERS 32 +#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) /* - * The cycle counter is ARMV7_CYCLE_COUNTER. - * The first event counter is ARMV7_COUNTER0. - * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). + * ARMv7 low level PMNC access */ -#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) /* - * ARMv7 low level PMNC access + * Perf Event to low level counters mapping */ +#define ARMV7_IDX_TO_COUNTER(x) \ + (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK) /* * Per-CPU PMNC: config reg @@ -708,103 +712,76 @@ enum armv7_counters { #define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ /* - * Available counters - */ -#define ARMV7_CNT0 0 /* First event counter */ -#define ARMV7_CCNT 31 /* Cycle counter */ - -/* Perf Event to low level counters mapping */ -#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) - -/* - * CNTENS: counters enable reg - */ -#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) - -/* - * CNTENC: counters disable reg - */ -#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) - -/* - * INTENS: counters overflow interrupt enable reg - */ -#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENS_C (1 << ARMV7_CCNT) - -/* - * INTENC: counters overflow interrupt disable reg - */ -#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENC_C (1 << ARMV7_CCNT) - -/* - * EVTSEL: Event selection reg + * FLAG: counters overflow flag status reg */ -#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ +#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ +#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK /* - * SELECT: Counter selection reg + * PMXEVTYPER: Event selection reg */ -#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ +#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */ +#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ /* - * FLAG: counters overflow flag status reg + * Event filters for PMUv2 */ -#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_FLAG_C (1 << ARMV7_CCNT) -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK +#define ARMV7_EXCLUDE_PL1 (1 << 31) +#define ARMV7_EXCLUDE_USER (1 << 30) +#define ARMV7_INCLUDE_HYP (1 << 27) -static inline unsigned long armv7_pmnc_read(void) +static inline u32 armv7_pmnc_read(void) { u32 val; asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); return val; } -static inline void armv7_pmnc_write(unsigned long val) +static inline void armv7_pmnc_write(u32 val) { val &= ARMV7_PMNC_MASK; isb(); asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); } -static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) +static inline int armv7_pmnc_has_overflowed(u32 pmnc) { return pmnc & ARMV7_OVERFLOWED_MASK; } -static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, - enum armv7_counters counter) +static inline int armv7_pmnc_counter_valid(int idx) +{ + return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST; +} + +static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx) { int ret = 0; + u32 counter; - if (counter == ARMV7_CYCLE_COUNTER) - ret = pmnc & ARMV7_FLAG_C; - else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) - ret = pmnc & ARMV7_FLAG_P(counter); - else + if (!armv7_pmnc_counter_valid(idx)) { pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), counter); + smp_processor_id(), idx); + } else { + counter = ARMV7_IDX_TO_COUNTER(idx); + ret = pmnc & BIT(counter); + } return ret; } -static inline int armv7_pmnc_select_counter(unsigned int idx) +static inline int armv7_pmnc_select_counter(int idx) { - u32 val; + u32 counter; - if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { - pr_err("CPU%u selecting wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u selecting wrong PMNC counter %d\n", + smp_processor_id(), idx); + return -EINVAL; } - val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter)); isb(); return idx; @@ -812,124 +789,95 @@ static inline int armv7_pmnc_select_counter(unsigned int idx) static inline u32 armv7pmu_read_counter(int idx) { - unsigned long value = 0; + u32 value = 0; - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mrc p15, 0, %0, c9, c13, 2" - : "=r" (value)); - } else + if (!armv7_pmnc_counter_valid(idx)) pr_err("CPU%u reading wrong counter %d\n", smp_processor_id(), idx); + else if (idx == ARMV7_IDX_CYCLE_COUNTER) + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); + else if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value)); return value; } static inline void armv7pmu_write_counter(int idx, u32 value) { - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mcr p15, 0, %0, c9, c13, 2" - : : "r" (value)); - } else + if (!armv7_pmnc_counter_valid(idx)) pr_err("CPU%u writing wrong counter %d\n", smp_processor_id(), idx); + else if (idx == ARMV7_IDX_CYCLE_COUNTER) + asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); + else if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value)); } -static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) +static inline void armv7_pmnc_write_evtsel(int idx, u32 val) { if (armv7_pmnc_select_counter(idx) == idx) { - val &= ARMV7_EVTSEL_MASK; + val &= ARMV7_EVTYPE_MASK; asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); } } -static inline u32 armv7_pmnc_enable_counter(unsigned int idx) +static inline int armv7_pmnc_enable_counter(int idx) { - u32 val; + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u enabling wrong PMNC counter %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENS_C; - else - val = ARMV7_CNTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter))); return idx; } -static inline u32 armv7_pmnc_disable_counter(unsigned int idx) +static inline int armv7_pmnc_disable_counter(int idx) { - u32 val; - + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u disabling wrong PMNC counter %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENC_C; - else - val = ARMV7_CNTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter))); return idx; } -static inline u32 armv7_pmnc_enable_intens(unsigned int idx) +static inline int armv7_pmnc_enable_intens(int idx) { - u32 val; + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENS_C; - else - val = ARMV7_INTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter))); return idx; } -static inline u32 armv7_pmnc_disable_intens(unsigned int idx) +static inline int armv7_pmnc_disable_intens(int idx) { - u32 val; + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENC_C; - else - val = ARMV7_INTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); return idx; } @@ -973,14 +921,14 @@ static void armv7_pmnc_dump_regs(void) asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); printk(KERN_INFO "CCNT =0x%08x\n", val); - for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { + for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) { armv7_pmnc_select_counter(cnt); asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); printk(KERN_INFO "CNT[%d] count =0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + ARMV7_IDX_TO_COUNTER(cnt), val); asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + ARMV7_IDX_TO_COUNTER(cnt), val); } } #endif @@ -988,12 +936,13 @@ static void armv7_pmnc_dump_regs(void) static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* * Enable counter and interrupt, and set the counter to count * the event that we're interested in. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* * Disable counter @@ -1002,9 +951,10 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) /* * Set event (if destined for PMNx counters) - * We don't need to set the event if it's a cycle count + * We only need to set the event for the cycle counter if we + * have the ability to perform event filtering. */ - if (idx != ARMV7_CYCLE_COUNTER) + if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) armv7_pmnc_write_evtsel(idx, hwc->config_base); /* @@ -1017,17 +967,18 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) */ armv7_pmnc_enable_counter(idx); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* * Disable counter and interrupt */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* * Disable counter @@ -1039,14 +990,14 @@ static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) */ armv7_pmnc_disable_intens(idx); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) { - unsigned long pmnc; + u32 pmnc; struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -1069,13 +1020,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) - continue; - /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. @@ -1090,7 +1038,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } /* @@ -1108,61 +1056,114 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) static void armv7pmu_start(void) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* Enable all counters */ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void armv7pmu_stop(void) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* Disable all counters */ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, +static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { int idx; + unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT; /* Always place a cycle counter into the cycle counter. */ - if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { - if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) + if (evtype == ARMV7_PERFCTR_CPU_CYCLES) { + if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; - return ARMV7_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * the events counters - */ - for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } + return ARMV7_IDX_CYCLE_COUNTER; + } - /* The counters are all in use. */ - return -EAGAIN; + /* + * For anything other than a cycle counter, try and use + * the events counters + */ + for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) { + if (!test_and_set_bit(idx, cpuc->used_mask)) + return idx; } + + /* The counters are all in use. */ + return -EAGAIN; +} + +/* + * Add an event filter to a given event. This will only work for PMUv2 PMUs. + */ +static int armv7pmu_set_event_filter(struct hw_perf_event *event, + struct perf_event_attr *attr) +{ + unsigned long config_base = 0; + + if (attr->exclude_idle) + return -EPERM; + if (attr->exclude_user) + config_base |= ARMV7_EXCLUDE_USER; + if (attr->exclude_kernel) + config_base |= ARMV7_EXCLUDE_PL1; + if (!attr->exclude_hv) + config_base |= ARMV7_INCLUDE_HYP; + + /* + * Install the filter into config_base as this is used to + * construct the event type. + */ + event->config_base = config_base; + + return 0; } static void armv7pmu_reset(void *info) { - u32 idx, nb_cnt = armpmu->num_events; + u32 idx, nb_cnt = cpu_pmu->num_events; /* The counter and interrupt enable registers are unknown at reset. */ - for (idx = 1; idx < nb_cnt; ++idx) + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) armv7pmu_disable_event(NULL, idx); /* Initialize & Reset PMNC: C and P bits */ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); } +static int armv7_a8_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a8_perf_map, + &armv7_a8_perf_cache_map, 0xFF); +} + +static int armv7_a9_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a9_perf_map, + &armv7_a9_perf_cache_map, 0xFF); +} + +static int armv7_a5_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a5_perf_map, + &armv7_a5_perf_cache_map, 0xFF); +} + +static int armv7_a15_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a15_perf_map, + &armv7_a15_perf_cache_map, 0xFF); +} + static struct arm_pmu armv7pmu = { .handle_irq = armv7pmu_handle_irq, .enable = armv7pmu_enable_event, @@ -1173,7 +1174,6 @@ static struct arm_pmu armv7pmu = { .start = armv7pmu_start, .stop = armv7pmu_stop, .reset = armv7pmu_reset, - .raw_event_mask = 0xFF, .max_period = (1LLU << 32) - 1, }; @@ -1188,62 +1188,59 @@ static u32 __init armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static const struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__init armv7_a8_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA8; armv7pmu.name = "ARMv7 Cortex-A8"; - armv7pmu.cache_map = &armv7_a8_perf_cache_map; - armv7pmu.event_map = &armv7_a8_perf_map; + armv7pmu.map_event = armv7_a8_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } -static const struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__init armv7_a9_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA9; armv7pmu.name = "ARMv7 Cortex-A9"; - armv7pmu.cache_map = &armv7_a9_perf_cache_map; - armv7pmu.event_map = &armv7_a9_perf_map; + armv7pmu.map_event = armv7_a9_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } -static const struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__init armv7_a5_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA5; armv7pmu.name = "ARMv7 Cortex-A5"; - armv7pmu.cache_map = &armv7_a5_perf_cache_map; - armv7pmu.event_map = &armv7_a5_perf_map; + armv7pmu.map_event = armv7_a5_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } -static const struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__init armv7_a15_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA15; armv7pmu.name = "ARMv7 Cortex-A15"; - armv7pmu.cache_map = &armv7_a15_perf_cache_map; - armv7pmu.event_map = &armv7_a15_perf_map; + armv7pmu.map_event = armv7_a15_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); + armv7pmu.set_event_filter = armv7pmu_set_event_filter; return &armv7pmu; } #else -static const struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__init armv7_a8_pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__init armv7_a9_pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__init armv7_a5_pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__init armv7_a15_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 3c4397491d08..e0cca10a8411 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -40,7 +40,7 @@ enum xscale_perf_types { }; enum xscale_counters { - XSCALE_CYCLE_COUNTER = 1, + XSCALE_CYCLE_COUNTER = 0, XSCALE_COUNTER0, XSCALE_COUNTER1, XSCALE_COUNTER2, @@ -222,7 +222,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc; struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -249,13 +249,10 @@ xscale1pmu_handle_irq(int irq_num, void *dev) perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) - continue; - if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; @@ -266,7 +263,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } irq_work_run(); @@ -284,6 +281,7 @@ static void xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -305,18 +303,19 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~mask; val |= evt; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -336,16 +335,16 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~mask; val |= evt; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static int -xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, +xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { if (XSCALE_PERFCTR_CCNT == event->config_base) { @@ -368,24 +367,26 @@ static void xscale1pmu_start(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val |= XSCALE_PMU_ENABLE; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale1pmu_stop(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~XSCALE_PMU_ENABLE; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static inline u32 @@ -424,7 +425,13 @@ xscale1pmu_write_counter(int counter, u32 val) } } -static const struct arm_pmu xscale1pmu = { +static int xscale_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &xscale_perf_map, + &xscale_perf_cache_map, 0xFF); +} + +static struct arm_pmu xscale1pmu = { .id = ARM_PERF_PMU_ID_XSCALE1, .name = "xscale1", .handle_irq = xscale1pmu_handle_irq, @@ -435,14 +442,12 @@ static const struct arm_pmu xscale1pmu = { .get_event_idx = xscale1pmu_get_event_idx, .start = xscale1pmu_start, .stop = xscale1pmu_stop, - .cache_map = &xscale_perf_cache_map, - .event_map = &xscale_perf_map, - .raw_event_mask = 0xFF, + .map_event = xscale_map_event, .num_events = 3, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__init xscale1pmu_init(void) { return &xscale1pmu; } @@ -560,7 +565,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc, of_flags; struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -581,13 +586,10 @@ xscale2pmu_handle_irq(int irq_num, void *dev) perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) - continue; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) continue; @@ -598,7 +600,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } irq_work_run(); @@ -616,6 +618,7 @@ static void xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags, ien, evtsel; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -649,16 +652,17 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags, ien, evtsel; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -692,14 +696,14 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static int -xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, +xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { int idx = xscale1pmu_get_event_idx(cpuc, event); @@ -718,24 +722,26 @@ static void xscale2pmu_start(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; val |= XSCALE_PMU_ENABLE; xscale2pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale2pmu_stop(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale2pmu_read_pmnc(); val &= ~XSCALE_PMU_ENABLE; xscale2pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static inline u32 @@ -786,7 +792,7 @@ xscale2pmu_write_counter(int counter, u32 val) } } -static const struct arm_pmu xscale2pmu = { +static struct arm_pmu xscale2pmu = { .id = ARM_PERF_PMU_ID_XSCALE2, .name = "xscale2", .handle_irq = xscale2pmu_handle_irq, @@ -797,24 +803,22 @@ static const struct arm_pmu xscale2pmu = { .get_event_idx = xscale2pmu_get_event_idx, .start = xscale2pmu_start, .stop = xscale2pmu_stop, - .cache_map = &xscale_perf_cache_map, - .event_map = &xscale_perf_map, - .raw_event_mask = 0xFF, + .map_event = xscale_map_event, .num_events = 5, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__init xscale2pmu_init(void) { return &xscale2pmu; } #else -static const struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__init xscale1pmu_init(void) { return NULL; } -static const struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__init xscale2pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2b70709376c3..2c3407ee8576 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -10,192 +10,26 @@ * */ -#define pr_fmt(fmt) "PMU: " fmt - -#include <linux/cpumask.h> #include <linux/err.h> -#include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> #include <asm/pmu.h> -static volatile long pmu_lock; - -static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES]; - -static int __devinit pmu_register(struct platform_device *pdev, - enum arm_pmu_type type) -{ - if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { - pr_warning("received registration request for unknown " - "device %d\n", type); - return -EINVAL; - } - - if (pmu_devices[type]) { - pr_warning("rejecting duplicate registration of PMU device " - "type %d.", type); - return -ENOSPC; - } - - pr_info("registered new PMU device of type %d\n", type); - pmu_devices[type] = pdev; - return 0; -} - -#define OF_MATCH_PMU(_name, _type) { \ - .compatible = _name, \ - .data = (void *)_type, \ -} - -#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU) - -static struct of_device_id armpmu_of_device_ids[] = { - OF_MATCH_CPU("arm,cortex-a9-pmu"), - OF_MATCH_CPU("arm,cortex-a8-pmu"), - OF_MATCH_CPU("arm,arm1136-pmu"), - OF_MATCH_CPU("arm,arm1176-pmu"), - {}, -}; - -#define PLAT_MATCH_PMU(_name, _type) { \ - .name = _name, \ - .driver_data = _type, \ -} - -#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU) - -static struct platform_device_id armpmu_plat_device_ids[] = { - PLAT_MATCH_CPU("arm-pmu"), - {}, -}; - -enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) -{ - const struct of_device_id *of_id; - const struct platform_device_id *pdev_id; - - /* provided by of_device_id table */ - if (pdev->dev.of_node) { - of_id = of_match_device(armpmu_of_device_ids, &pdev->dev); - BUG_ON(!of_id); - return (enum arm_pmu_type)of_id->data; - } - - /* Provided by platform_device_id table */ - pdev_id = platform_get_device_id(pdev); - BUG_ON(!pdev_id); - return pdev_id->driver_data; -} - -static int __devinit armpmu_device_probe(struct platform_device *pdev) -{ - return pmu_register(pdev, armpmu_device_type(pdev)); -} - -static struct platform_driver armpmu_driver = { - .driver = { - .name = "arm-pmu", - .of_match_table = armpmu_of_device_ids, - }, - .probe = armpmu_device_probe, - .id_table = armpmu_plat_device_ids, -}; - -static int __init register_pmu_driver(void) -{ - return platform_driver_register(&armpmu_driver); -} -device_initcall(register_pmu_driver); - -struct platform_device * -reserve_pmu(enum arm_pmu_type device) -{ - struct platform_device *pdev; - - if (test_and_set_bit_lock(device, &pmu_lock)) { - pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[device] == NULL) { - clear_bit_unlock(device, &pmu_lock); - pdev = ERR_PTR(-ENODEV); - } else { - pdev = pmu_devices[device]; - } - - return pdev; -} -EXPORT_SYMBOL_GPL(reserve_pmu); +/* + * PMU locking to ensure mutual exclusion between different subsystems. + */ +static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)]; int -release_pmu(enum arm_pmu_type device) -{ - if (WARN_ON(!pmu_devices[device])) - return -EINVAL; - clear_bit_unlock(device, &pmu_lock); - return 0; -} -EXPORT_SYMBOL_GPL(release_pmu); - -static int -set_irq_affinity(int irq, - unsigned int cpu) +reserve_pmu(enum arm_pmu_type type) { -#ifdef CONFIG_SMP - int err = irq_set_affinity(irq, cpumask_of(cpu)); - if (err) - pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, cpu); - return err; -#else - return -EINVAL; -#endif -} - -static int -init_cpu_pmu(void) -{ - int i, irqs, err = 0; - struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; - - if (!pdev) - return -ENODEV; - - irqs = pdev->num_resources; - - /* - * If we have a single PMU interrupt that we can't shift, assume that - * we're running on a uniprocessor machine and continue. - */ - if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0))) - return 0; - - for (i = 0; i < irqs; ++i) { - err = set_irq_affinity(platform_get_irq(pdev, i), i); - if (err) - break; - } - - return err; + return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0; } +EXPORT_SYMBOL_GPL(reserve_pmu); -int -init_pmu(enum arm_pmu_type device) +void +release_pmu(enum arm_pmu_type type) { - int err = 0; - - switch (device) { - case ARM_PMU_DEVICE_CPU: - err = init_cpu_pmu(); - break; - default: - pr_warning("attempt to initialise unknown device %d\n", - device); - err = -EINVAL; - } - - return err; + clear_bit_unlock(type, pmu_lock); } -EXPORT_SYMBOL_GPL(init_pmu); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 1a347f481e5e..fd0814076ff6 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -319,7 +319,7 @@ void show_regs(struct pt_regs * regs) printk("\n"); printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm); __show_regs(regs); - __backtrace(); + dump_stack(); } ATOMIC_NOTIFIER_HEAD(thread_notify_head); diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 9cf4cbf8f95b..d0cdedf4864d 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -57,7 +57,8 @@ relocate_new_kernel: mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - mov pc,lr + ARM( mov pc, lr ) + THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 70bca649e925..bda0a218f4a5 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -29,6 +29,8 @@ #include <linux/fs.h> #include <linux/proc_fs.h> #include <linux/memblock.h> +#include <linux/bug.h> +#include <linux/compiler.h> #include <asm/unified.h> #include <asm/cpu.h> @@ -42,6 +44,7 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/tlbflush.h> +#include <asm/system.h> #include <asm/prom.h> #include <asm/mach/arch.h> @@ -115,6 +118,13 @@ struct outer_cache_fns outer_cache __read_mostly; EXPORT_SYMBOL(outer_cache); #endif +/* + * Cached cpu_architecture() result for use by assembler code. + * C code should use the cpu_architecture() function instead of accessing this + * variable directly. + */ +int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN; + struct stack { u32 irq[3]; u32 abt[3]; @@ -210,7 +220,7 @@ static const char *proc_arch[] = { "?(17)", }; -int cpu_architecture(void) +static int __get_cpu_architecture(void) { int cpu_arch; @@ -243,11 +253,22 @@ int cpu_architecture(void) return cpu_arch; } +int __pure cpu_architecture(void) +{ + BUG_ON(__cpu_architecture == CPU_ARCH_UNKNOWN); + + return __cpu_architecture; +} + static int cpu_has_aliasing_icache(unsigned int arch) { int aliasing_icache; unsigned int id_reg, num_sets, line_size; + /* PIPT caches never alias. */ + if (icache_is_pipt()) + return 0; + /* arch specifies the register format */ switch (arch) { case CPU_ARCH_ARMv7: @@ -280,18 +301,25 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ + arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; - if ((cachetype & (3 << 14)) == 1 << 14) + switch (cachetype & (3 << 14)) { + case (1 << 14): cacheid |= CACHEID_ASID_TAGGED; - else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) - cacheid |= CACHEID_VIPT_I_ALIASING; - } else if (cachetype & (1 << 23)) { - cacheid = CACHEID_VIPT_ALIASING; + break; + case (3 << 14): + cacheid |= CACHEID_PIPT; + break; + } } else { - cacheid = CACHEID_VIPT_NONALIASING; - if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) - cacheid |= CACHEID_VIPT_I_ALIASING; + arch = CPU_ARCH_ARMv6; + if (cachetype & (1 << 23)) + cacheid = CACHEID_VIPT_ALIASING; + else + cacheid = CACHEID_VIPT_NONALIASING; } + if (cpu_has_aliasing_icache(arch)) + cacheid |= CACHEID_VIPT_I_ALIASING; } else { cacheid = CACHEID_VIVT; } @@ -299,10 +327,11 @@ static void __init cacheid_init(void) printk("CPU: %s data cache, %s instruction cache\n", cache_is_vivt() ? "VIVT" : cache_is_vipt_aliasing() ? "VIPT aliasing" : - cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown", + cache_is_vipt_nonaliasing() ? "PIPT / VIPT nonaliasing" : "unknown", cache_is_vivt() ? "VIVT" : icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" : icache_is_vipt_aliasing() ? "VIPT aliasing" : + icache_is_pipt() ? "PIPT" : cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown"); } @@ -413,6 +442,7 @@ static void __init setup_processor(void) } cpu_name = list->cpu_name; + __cpu_architecture = __get_cpu_architecture(); #ifdef MULTI_CPU processor = *list->proc; @@ -819,25 +849,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) if (__atags_pointer) tags = phys_to_virt(__atags_pointer); - else if (mdesc->boot_params) { -#ifdef CONFIG_MMU - /* - * We still are executing with a minimal MMU mapping created - * with the presumption that the machine default for this - * is located in the first MB of RAM. Anything else will - * fault and silently hang the kernel at this point. - */ - if (mdesc->boot_params < PHYS_OFFSET || - mdesc->boot_params >= PHYS_OFFSET + SZ_1M) { - printk(KERN_WARNING - "Default boot params at physical 0x%08lx out of reach\n", - mdesc->boot_params); - } else -#endif - { - tags = phys_to_virt(mdesc->boot_params); - } - } + else if (mdesc->atag_offset) + tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); #if defined(CONFIG_DEPRECATED_PARAM_STRUCT) /* @@ -860,7 +873,7 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) } if (mdesc->fixup) - mdesc->fixup(mdesc, tags, &from, &meminfo); + mdesc->fixup(tags, &from, &meminfo); if (tags->hdr.tag == ATAG_CORE) { if (meminfo.nr_banks != 0) diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index dc902f2c6845..020e99c845e7 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -8,92 +8,61 @@ .text /* - * Save CPU state for a suspend - * r1 = v:p offset - * r2 = suspend function arg0 - * r3 = suspend function + * Save CPU state for a suspend. This saves the CPU general purpose + * registers, and allocates space on the kernel stack to save the CPU + * specific registers and some other data for resume. + * r0 = suspend function arg0 + * r1 = suspend function */ ENTRY(__cpu_suspend) stmfd sp!, {r4 - r11, lr} #ifdef MULTI_CPU ldr r10, =processor - ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state - ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function + ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state #else - ldr r5, =cpu_suspend_size - ldr ip, =cpu_do_resume + ldr r4, =cpu_suspend_size #endif - mov r6, sp @ current virtual SP - sub sp, sp, r5 @ allocate CPU state on stack - mov r0, sp @ save pointer to CPU save block - add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn - ldr r5, =sleep_save_sp - add r6, sp, r1 @ convert SP to phys - stmfd sp!, {r2, r3} @ save suspend func arg and pointer + mov r5, sp @ current virtual SP + add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn + sub sp, sp, r4 @ allocate CPU state on stack + stmfd sp!, {r0, r1} @ save suspend func arg and pointer + add r0, sp, #8 @ save pointer to save block + mov r1, r4 @ size of save block + mov r2, r5 @ virtual SP + ldr r3, =sleep_save_sp #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) and lr, lr, #15 - str r6, [r5, lr, lsl #2] @ save phys SP -#else - str r6, [r5] @ save phys SP -#endif -#ifdef MULTI_CPU - mov lr, pc - ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state -#else - bl cpu_do_suspend -#endif - - @ flush data cache -#ifdef MULTI_CACHE - ldr r10, =cpu_cache - mov lr, pc - ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] -#else - bl __cpuc_flush_kern_all + add r3, r3, lr, lsl #2 #endif + bl __cpu_suspend_save adr lr, BSYM(cpu_suspend_abort) ldmfd sp!, {r0, pc} @ call suspend fn ENDPROC(__cpu_suspend) .ltorg cpu_suspend_abort: - ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn + ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn + teq r0, #0 + moveq r0, #1 @ force non-zero value mov sp, r2 ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_suspend_abort) /* * r0 = control register value - * r1 = v:p offset (preserved by cpu_do_resume) - * r2 = phys page table base - * r3 = L1 section flags */ + .align 5 ENTRY(cpu_resume_mmu) - adr r4, cpu_resume_turn_mmu_on - mov r4, r4, lsr #20 - orr r3, r3, r4, lsl #20 - ldr r5, [r2, r4, lsl #2] @ save old mapping - str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code - sub r2, r2, r1 ldr r3, =cpu_resume_after_mmu - bic r1, r0, #CR_C @ ensure D-cache is disabled - b cpu_resume_turn_mmu_on -ENDPROC(cpu_resume_mmu) - .ltorg - .align 5 -cpu_resume_turn_mmu_on: - mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc - mrc p15, 0, r1, c0, c0, 0 @ read id reg - mov r1, r1 - mov r1, r1 + mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc + mrc p15, 0, r0, c0, c0, 0 @ read id reg + mov r0, r0 + mov r0, r0 mov pc, r3 @ jump to virtual address -ENDPROC(cpu_resume_turn_mmu_on) +ENDPROC(cpu_resume_mmu) cpu_resume_after_mmu: - str r5, [r2, r4, lsl #2] @ restore old mapping - mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache bl cpu_init @ restore the und/abt/irq banked regs mov r0, #0 @ return zero on success ldmfd sp!, {r4 - r11, pc} @@ -119,7 +88,7 @@ ENTRY(cpu_resume) ldr r0, sleep_save_sp @ stack phys addr #endif setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off - @ load v:p, stack, resume fn + @ load phys pgd, stack, resume fn ARM( ldmia r0!, {r1, sp, pc} ) THUMB( ldmia r0!, {r1, r2, r3} ) THUMB( mov sp, r2 ) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d88ff0230e82..ef5640b9e218 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -16,7 +16,6 @@ #include <linux/cache.h> #include <linux/profile.h> #include <linux/errno.h> -#include <linux/ftrace.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/cpu.h> @@ -31,6 +30,8 @@ #include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/cputype.h> +#include <asm/exception.h> +#include <asm/topology.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -39,6 +40,7 @@ #include <asm/tlbflush.h> #include <asm/ptrace.h> #include <asm/localtimer.h> +#include <asm/smp_plat.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -259,6 +261,20 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + /* * Called by both boot and secondaries to move global data into * per-processor storage. @@ -268,6 +284,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + + store_cpu_topology(cpuid); } /* @@ -301,17 +319,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) */ platform_secondary_init(cpu); - /* - * Enable local interrupts. - */ notify_cpu_starting(cpu); - local_irq_enable(); - local_fiq_enable(); - - /* - * Setup the percpu timer for this CPU. - */ - percpu_timer_setup(); calibrate_delay(); @@ -323,10 +331,23 @@ asmlinkage void __cpuinit secondary_start_kernel(void) * before we continue. */ set_cpu_online(cpu, true); + + /* + * Setup the percpu timer for this CPU. + */ + percpu_timer_setup(); + while (!cpu_active(cpu)) cpu_relax(); /* + * cpu_active bit is set, so it's safe to enalbe interrupts + * now. + */ + local_irq_enable(); + local_fiq_enable(); + + /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -358,6 +379,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = num_possible_cpus(); + init_cpu_topology(); + smp_store_cpu_info(smp_processor_id()); /* @@ -437,10 +460,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu) for (i = 0; i < NR_IPI; i++) sum += __get_irq_stat(cpu, ipi_irqs[i]); -#ifdef CONFIG_LOCAL_TIMERS - sum += __get_irq_stat(cpu, local_timer_irqs); -#endif - return sum; } @@ -457,33 +476,6 @@ static void ipi_timer(void) irq_exit(); } -#ifdef CONFIG_LOCAL_TIMERS -asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - int cpu = smp_processor_id(); - - if (local_timer_ack()) { - __inc_irq_stat(cpu, local_timer_irqs); - ipi_timer(); - } - - set_irq_regs(old_regs); -} - -void show_local_irqs(struct seq_file *p, int prec) -{ - unsigned int cpu; - - seq_printf(p, "%*s: ", prec, "LOC"); - - for_each_present_cpu(cpu) - seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs)); - - seq_printf(p, " Local timer interrupts\n"); -} -#endif - #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST static void smp_timer_broadcast(const struct cpumask *mask) { @@ -534,11 +526,11 @@ static void percpu_timer_stop(void) unsigned int cpu = smp_processor_id(); struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); + local_timer_stop(evt); } #endif -static DEFINE_SPINLOCK(stop_lock); +static DEFINE_RAW_SPINLOCK(stop_lock); /* * ipi_cpu_stop - handle IPI from smp_send_stop() @@ -547,10 +539,10 @@ static void ipi_cpu_stop(unsigned int cpu) { if (system_state == SYSTEM_BOOTING || system_state == SYSTEM_RUNNING) { - spin_lock(&stop_lock); + raw_spin_lock(&stop_lock); printk(KERN_CRIT "CPU%u: stopping\n", cpu); dump_stack(); - spin_unlock(&stop_lock); + raw_spin_unlock(&stop_lock); } set_cpu_online(cpu, false); @@ -567,6 +559,11 @@ static void ipi_cpu_stop(unsigned int cpu) */ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs) { + handle_IPI(ipinr, regs); +} + +void handle_IPI(int ipinr, struct pt_regs *regs) +{ unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7f204a..8f5dd7963356 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -33,10 +34,19 @@ unsigned int __init scu_get_core_count(void __iomem *scu_base) /* * Enable the SCU */ -void __init scu_enable(void __iomem *scu_base) +void scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2c277d40cee6..a8a6682d6b52 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <asm/smp_twd.h> +#include <asm/localtimer.h> #include <asm/hardware/gic.h> /* set up by the platform code */ @@ -26,6 +27,8 @@ void __iomem *twd_base; static unsigned long twd_timer_rate; +static struct clock_event_device __percpu **twd_evt; + static void twd_set_mode(enum clock_event_mode mode, struct clock_event_device *clk) { @@ -80,6 +83,12 @@ int twd_timer_ack(void) return 0; } +void twd_timer_stop(struct clock_event_device *clk) +{ + twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk); + disable_percpu_irq(clk->irq); +} + static void __cpuinit twd_calibrate_rate(void) { unsigned long count; @@ -119,11 +128,43 @@ static void __cpuinit twd_calibrate_rate(void) } } +static irqreturn_t twd_handler(int irq, void *dev_id) +{ + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; + + if (twd_timer_ack()) { + evt->event_handler(evt); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + /* * Setup the local clock events for a CPU. */ void __cpuinit twd_timer_setup(struct clock_event_device *clk) { + struct clock_event_device **this_cpu_clk; + + if (!twd_evt) { + int err; + + twd_evt = alloc_percpu(struct clock_event_device *); + if (!twd_evt) { + pr_err("twd: can't allocate memory\n"); + return; + } + + err = request_percpu_irq(clk->irq, twd_handler, + "twd", twd_evt); + if (err) { + pr_err("twd: can't register interrupt %d (%d)\n", + clk->irq, err); + return; + } + } + twd_calibrate_rate(); clk->name = "local_timer"; @@ -137,8 +178,10 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); clk->min_delta_ns = clockevent_delta2ns(0xf, clk); - /* Make sure our local interrupt controller has this enabled */ - gic_enable_ppi(clk->irq); + this_cpu_clk = __this_cpu_ptr(twd_evt); + *this_cpu_clk = clk; clockevents_register_device(clk); + + enable_percpu_irq(clk->irq, 0); } diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c new file mode 100644 index 000000000000..93a22d282c16 --- /dev/null +++ b/arch/arm/kernel/suspend.c @@ -0,0 +1,72 @@ +#include <linux/init.h> + +#include <asm/pgalloc.h> +#include <asm/pgtable.h> +#include <asm/memory.h> +#include <asm/suspend.h> +#include <asm/tlbflush.h> + +static pgd_t *suspend_pgd; + +extern int __cpu_suspend(unsigned long, int (*)(unsigned long)); +extern void cpu_resume_mmu(void); + +/* + * This is called by __cpu_suspend() to save the state, and do whatever + * flushing is required to ensure that when the CPU goes to sleep we have + * the necessary data available when the caches are not searched. + */ +void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr) +{ + *save_ptr = virt_to_phys(ptr); + + /* This must correspond to the LDM in cpu_resume() assembly */ + *ptr++ = virt_to_phys(suspend_pgd); + *ptr++ = sp; + *ptr++ = virt_to_phys(cpu_do_resume); + + cpu_do_suspend(ptr); + + flush_cache_all(); + outer_clean_range(*save_ptr, *save_ptr + ptrsz); + outer_clean_range(virt_to_phys(save_ptr), + virt_to_phys(save_ptr) + sizeof(*save_ptr)); +} + +/* + * Hide the first two arguments to __cpu_suspend - these are an implementation + * detail which platform code shouldn't have to know about. + */ +int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) +{ + struct mm_struct *mm = current->active_mm; + int ret; + + if (!suspend_pgd) + return -EINVAL; + + /* + * Provide a temporary page table with an identity mapping for + * the MMU-enable code, required for resuming. On successful + * resume (indicated by a zero return code), we need to switch + * back to the correct page tables. + */ + ret = __cpu_suspend(arg, fn); + if (ret == 0) { + cpu_switch_mm(mm->pgd, mm); + local_flush_tlb_all(); + } + + return ret; +} + +static int __init cpu_suspend_init(void) +{ + suspend_pgd = pgd_alloc(&init_mm); + if (suspend_pgd) { + unsigned long addr = virt_to_phys(cpu_resume_mmu); + identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE); + } + return suspend_pgd ? 0 : -ENOMEM; +} +core_initcall(cpu_suspend_init); diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index cb634c3e28e9..5a54b95d6bd2 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -39,13 +39,11 @@ */ static struct sys_timer *system_timer; -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ + defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); - -#ifdef CONFIG_RTC_DRV_CMOS_MODULE EXPORT_SYMBOL(rtc_lock); -#endif #endif /* pc-style 'CMOS' RTC support */ /* change this if you have some constant time drift */ diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c new file mode 100644 index 000000000000..1040c00405d0 --- /dev/null +++ b/arch/arm/kernel/topology.c @@ -0,0 +1,148 @@ +/* + * arch/arm/kernel/topology.c + * + * Copyright (C) 2011 Linaro Limited. + * Written by: Vincent Guittot + * + * based on arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> + +#include <asm/cputype.h> +#include <asm/topology.h> + +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +/* + * These masks reflect the current use of the affinity levels. + * The affinity level can be up to 16 bits according to ARM ARM + */ + +#define MPIDR_LEVEL0_MASK 0x3 +#define MPIDR_LEVEL0_SHIFT 0 + +#define MPIDR_LEVEL1_MASK 0xF +#define MPIDR_LEVEL1_SHIFT 8 + +#define MPIDR_LEVEL2_MASK 0xFF +#define MPIDR_LEVEL2_SHIFT 16 + +struct cputopo_arm cpu_topology[NR_CPUS]; + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +{ + return &cpu_topology[cpu].core_sibling; +} + +/* + * store_cpu_topology is called at boot when only one cpu is running + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, + * which prevents simultaneous write access to cpu_topology array + */ +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; + unsigned int mpidr; + unsigned int cpu; + + /* If the cpu topology has been already set, just return */ + if (cpuid_topo->core_id != -1) + return; + + mpidr = read_cpuid_mpidr(); + + /* create cpu topology mapping */ + if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) { + /* + * This is a multiprocessor system + * multiprocessor format & multiprocessor mode field are set + */ + + if (mpidr & MPIDR_MT_BITMASK) { + /* core performance interdependency */ + cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) + & MPIDR_LEVEL2_MASK; + } else { + /* largely independent cores */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + } + } else { + /* + * This is an uniprocessor system + * we are in multiprocessor format but uniprocessor system + * or in the old uniprocessor format + */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = 0; + cpuid_topo->socket_id = -1; + } + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id == cpu_topo->socket_id) { + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id == cpu_topo->core_id) { + cpumask_set_cpu(cpuid, + &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->thread_sibling); + } + } + } + smp_wmb(); + + printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", + cpuid, cpu_topology[cpuid].thread_id, + cpu_topology[cpuid].core_id, + cpu_topology[cpuid].socket_id, mpidr); +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc9f9da782cb..99a572702509 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -21,12 +21,14 @@ #include <linux/kdebug.h> #include <linux/module.h> #include <linux/kexec.h> +#include <linux/bug.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/atomic.h> #include <asm/cacheflush.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> @@ -255,7 +257,7 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt return ret; } -static DEFINE_SPINLOCK(die_lock); +static DEFINE_RAW_SPINLOCK(die_lock); /* * This function is protected against re-entrancy. @@ -267,9 +269,11 @@ void die(const char *str, struct pt_regs *regs, int err) oops_enter(); - spin_lock_irq(&die_lock); + raw_spin_lock_irq(&die_lock); console_verbose(); bust_spinlocks(1); + if (!user_mode(regs)) + report_bug(regs->ARM_pc, regs); ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) @@ -277,7 +281,7 @@ void die(const char *str, struct pt_regs *regs, int err) bust_spinlocks(0); add_taint(TAINT_DIE); - spin_unlock_irq(&die_lock); + raw_spin_unlock_irq(&die_lock); oops_exit(); if (in_interrupt()) @@ -301,25 +305,43 @@ void arm_notify_die(const char *str, struct pt_regs *regs, } } +#ifdef CONFIG_GENERIC_BUG + +int is_valid_bugaddr(unsigned long pc) +{ +#ifdef CONFIG_THUMB2_KERNEL + unsigned short bkpt; +#else + unsigned long bkpt; +#endif + + if (probe_kernel_address((unsigned *)pc, bkpt)) + return 0; + + return bkpt == BUG_INSTR_VALUE; +} + +#endif + static LIST_HEAD(undef_hook); -static DEFINE_SPINLOCK(undef_lock); +static DEFINE_RAW_SPINLOCK(undef_lock); void register_undef_hook(struct undef_hook *hook) { unsigned long flags; - spin_lock_irqsave(&undef_lock, flags); + raw_spin_lock_irqsave(&undef_lock, flags); list_add(&hook->node, &undef_hook); - spin_unlock_irqrestore(&undef_lock, flags); + raw_spin_unlock_irqrestore(&undef_lock, flags); } void unregister_undef_hook(struct undef_hook *hook) { unsigned long flags; - spin_lock_irqsave(&undef_lock, flags); + raw_spin_lock_irqsave(&undef_lock, flags); list_del(&hook->node); - spin_unlock_irqrestore(&undef_lock, flags); + raw_spin_unlock_irqrestore(&undef_lock, flags); } static int call_undef_hook(struct pt_regs *regs, unsigned int instr) @@ -328,12 +350,12 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr) unsigned long flags; int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL; - spin_lock_irqsave(&undef_lock, flags); + raw_spin_lock_irqsave(&undef_lock, flags); list_for_each_entry(hook, &undef_hook, node) if ((instr & hook->instr_mask) == hook->instr_val && (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) fn = hook->fn; - spin_unlock_irqrestore(&undef_lock, flags); + raw_spin_unlock_irqrestore(&undef_lock, flags); return fn ? fn(regs, instr) : 1; } @@ -706,16 +728,6 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) arm_notify_die("unknown data abort code", regs, &info, instr, 0); } -void __attribute__((noreturn)) __bug(const char *file, int line) -{ - printk(KERN_CRIT"kernel BUG at %s:%d!\n", file, line); - *(int *)0 = 0; - - /* Avoid "noreturn function does return" */ - for (;;); -} -EXPORT_SYMBOL(__bug); - void __readwrite_bug(const char *fn) { printk("%s called, but not implemented\n", fn); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8514f6..20b3041e0860 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -21,10 +21,13 @@ #define ARM_CPU_KEEP(x) #endif -#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) +#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \ + defined(CONFIG_GENERIC_BUG) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +42,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +55,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +69,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +292,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index a673297b0cf1..cd07b5814c23 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -22,15 +22,10 @@ #define mask r7 #define offset r8 -ENTRY(__backtrace) - mov r1, #0x10 - mov r0, fp - ENTRY(c_backtrace) #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) mov pc, lr -ENDPROC(__backtrace) ENDPROC(c_backtrace) #else stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location... @@ -107,7 +102,6 @@ for_each_frame: tst frame, mask @ Check for address exceptions mov r1, frame bl printk no_frame: ldmfd sp!, {r4 - r8, pc} -ENDPROC(__backtrace) ENDPROC(c_backtrace) .pushsection __ex_table,"a" diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index faa7748142da..e55c4842c290 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -13,6 +13,7 @@ */ #include <linux/linkage.h> +#include <asm/unwind.h> #ifdef __ARMEB__ #define xh r0 @@ -44,6 +45,7 @@ */ ENTRY(__do_div64) +UNWIND(.fnstart) @ Test for easy paths first. subs ip, r4, #1 @@ -189,7 +191,12 @@ ENTRY(__do_div64) moveq yh, xh moveq xh, #0 moveq pc, lr +UNWIND(.fnend) +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) +Ldiv0_64: @ Division by 0: str lr, [sp, #-8]! bl __div0 @@ -200,4 +207,5 @@ ENTRY(__do_div64) mov xh, #0 ldr pc, [sp], #8 +UNWIND(.fnend) ENDPROC(__do_div64) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 8b9b13649f81..025f742dd4df 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <linux/hardirq.h> /* for in_atomic() */ #include <linux/gfp.h> +#include <linux/highmem.h> #include <asm/current.h> #include <asm/page.h> diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 3462b815054a..9ab5a3e5f4f1 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -4,15 +4,15 @@ # INITRD_PHYS must be in RAM ifeq ($(CONFIG_ARCH_AT91CAP9),y) - zreladdr-y := 0x70008000 + zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) - zreladdr-y := 0x70008000 + zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 else - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index dba0d8d8a4bd..f87f5040e78e 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -16,6 +16,7 @@ #include <asm/mach/irq.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -23,7 +24,6 @@ #include <mach/board.h> #include <mach/cpu.h> -#include <mach/gpio.h> #include <mach/at91cap9.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7227755ffec6..978be950035a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -14,11 +14,11 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 39f81f47b4ba..3c2b580b9d75 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -13,11 +13,11 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> @@ -319,7 +319,7 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) if (!data) return; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (data->slot[i].bus_width) { /* input/irq */ if (data->slot[i].detect_pin) { diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index d522b47e30b5..6c8e3b5f669f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -157,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 0f917928eeb7..4e647b653339 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -14,6 +14,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -21,7 +22,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index a050f41fc860..dd7662bc395f 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -20,7 +21,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index e04c5fb6f1ee..1532b508c814 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/pm.h> +#include <linux/dma-mapping.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -319,6 +320,7 @@ static void at91sam9g45_poweroff(void) static void __init at91sam9g45_map_io(void) { at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); + init_consistent_dma_size(SZ_4M); } static void __init at91sam9g45_initialize(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 600bffb01edb..c3dfb1b3b1e3 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -21,7 +22,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index aacb19dc9225..305a851b5bff 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -10,6 +10,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -17,7 +18,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 5aa58851eb39..367d5cd5e362 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b0c796d42e49..0487ea10c2d6 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -25,6 +25,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -43,7 +44,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index d1abd5898e85..747b2eaa9737 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 679b0b743e92..062670351a6a 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <asm/mach/map.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index c578c5d90728..774c87fcbd5b 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index f4da8a16d5dc..fc885a4ce243 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2d919f5a4f57..d35e65b08ccd 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -36,7 +37,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 17654d5e94e6..c3936665e645 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 72b55674616c..586100e2acbb 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -35,7 +36,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 01170a2766a8..45db7a3dbef0 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 7c0313c51f26..2f9c16d29212 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 4a170890b3b1..3bae73e63633 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 9dc8d496ead1..15a3f1a87ab0 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include <mach/at91rm9200_mc.h> diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9bc6ab32e0ac..6094496f7edb 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -44,7 +45,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b7b8390e8a00..0a8fe6a1b7c8 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 81f911033681..938cc390bea3 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 6f08faadb474..b4ac30e38a9e 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 85bcccd7b9e4..99fd7f8aee0e 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 4d3a02f1289e..2a21e790250e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8a50c3e67186..89c8b579bfda 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 5096a0ec50c1..3741f43cdae9 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -45,7 +46,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ea8f185d3b9d..a580dd451a41 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -44,7 +45,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 817f59d7251b..8d77c2ff96b2 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -18,6 +18,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ad234ccbf57e..2d6203ac1a42 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -14,6 +14,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 4f14b54b93a8..39a28effc3df 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -8,6 +8,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -30,7 +31,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 8c4c1a02c4be..bac9b65cf551 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 25e793782a4e..5bd735787d6d 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 95edcbd2aec6..3c288b396fc4 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -43,7 +44,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 4615528205c8..224e9e2f8674 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/errno.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/debugfs.h> @@ -22,9 +23,6 @@ #include <mach/hardware.h> #include <mach/at91_pio.h> -#include <mach/gpio.h> - -#include <asm/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 2c611b9a0138..406bb6496805 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -128,8 +128,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONSISTENT_DMA_SIZE SZ_4M - /* * DMA peripheral identifiers * for hardware handshaking interface diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index bc1e0b2e2f4f..0ed8648c6452 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/at91_dbgu.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 056dc6674b6b..2b9a1f51210f 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -214,11 +214,6 @@ extern void at91_gpio_resume(void); */ #include <asm/errno.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep #define gpio_to_irq(gpio) (gpio) #define irq_to_gpio(irq) (irq) diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 0415a839e1ad..8dfafe76ffe6 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -9,13 +9,13 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> #include <mach/board.h> -#include <mach/gpio.h> /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 4159eca78945..7046158109d7 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -10,6 +10,7 @@ * (at your option) any later version. */ +#include <linux/gpio.h> #include <linux/suspend.h> #include <linux/sched.h> #include <linux/proc_fs.h> @@ -25,7 +26,6 @@ #include <asm/mach/irq.h> #include <mach/at91_pmc.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig index 457b4384913e..9170d16dca50 100644 --- a/arch/arm/mach-bcmring/Kconfig +++ b/arch/arm/mach-bcmring/Kconfig @@ -17,5 +17,3 @@ config BCM_ZRELADDR hex "Compressed ZREL ADDR" endmenu - -# source "drivers/char/bcmring/Kconfig" diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot index fb53b283bebb..aef2467757fa 100644 --- a/arch/arm/mach-bcmring/Makefile.boot +++ b/arch/arm/mach-bcmring/Makefile.boot @@ -1,6 +1,6 @@ # Address where decompressor will be written and eventually executed. # # default to SDRAM -zreladdr-y := $(CONFIG_BCM_ZRELADDR) +zreladdr-y += $(CONFIG_BCM_ZRELADDR) params_phys-y := 0x00000800 diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index a604b9ebb501..31a143592c81 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -136,8 +136,8 @@ static void __init bcmring_init_machine(void) * *****************************************************************************/ -static void __init bcmring_fixup(struct machine_desc *desc, - struct tag *t, char **cmdline, struct meminfo *mi) { +static void __init bcmring_fixup(struct tag *t, char **cmdline, + struct meminfo *mi) { #ifdef CONFIG_BLK_DEV_INITRD printk(KERN_NOTICE "bcmring_fixup\n"); t->hdr.tag = ATAG_CORE; diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index ed78aabb8e9f..6ae20a649a97 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -22,7 +22,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/memory.h> #include <cfg_global.h> #include <mach/csp/mm_io.h> @@ -31,7 +30,7 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_START PLAT_PHYS_OFFSET +#define RAM_START PHYS_OFFSET #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_BASE PAGE_OFFSET diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h deleted file mode 100644 index 15162e4c75f9..000000000000 --- a/arch/arm/mach-bcmring/include/mach/memory.h +++ /dev/null @@ -1,33 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <cfg_global.h> - -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ - -#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE - -/* - * Maximum DMA memory allowed is 14M - */ -#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M) - -#endif diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c index c48feaf4e8e9..437fa683bcb2 100644 --- a/arch/arm/mach-bcmring/irq.c +++ b/arch/arm/mach-bcmring/irq.c @@ -20,7 +20,6 @@ #include <linux/stddef.h> #include <linux/list.h> #include <linux/timer.h> -#include <linux/version.h> #include <linux/io.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c index 0f1c37e4523a..8616876abb9f 100644 --- a/arch/arm/mach-bcmring/mm.c +++ b/arch/arm/mach-bcmring/mm.c @@ -13,6 +13,7 @@ *****************************************************************************/ #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -53,4 +54,6 @@ void __init bcmring_map_io(void) { iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc)); + /* Maximum DMA memory allowed is 14M */ + init_consistent_dma_size(14 << 20); } diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c index 2d415d2a8e68..af9c3d7e2a0c 100644 --- a/arch/arm/mach-bcmring/timer.c +++ b/arch/arm/mach-bcmring/timer.c @@ -12,7 +12,6 @@ * consent. *****************************************************************************/ -#include <linux/version.h> #include <linux/types.h> #include <linux/module.h> #include <csp/tmrHw.h> diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index a51fcef64fe0..9398e859b5af 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +1,5 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y := 0xc0028000 + zreladdr-y += 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 4a74b2c959bd..0276091b7f86 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -64,7 +64,7 @@ void __init autcpu12_map_io(void) MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ - .boot_params = 0xc0020000, + .atag_offset = 0x20000, .map_io = autcpu12_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 5a1689d48793..25b3bfd0e85a 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -55,7 +55,7 @@ static void __init cdb89712_map_io(void) MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = cdb89712_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index 16481cf3e931..1df9ec67aa92 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -56,7 +56,7 @@ static void __init ceiva_map_io(void) MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") /* Maintainer: Rob Scott */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = ceiva_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 67b5abb4a60a..80496c09ac59 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -26,8 +26,7 @@ #include "common.h" static void __init -fixup_clep7312(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) { mi->nr_banks=1; mi->bank[0].start = 0xc0000000; @@ -37,7 +36,7 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ - .boot_params = 0xc0000100, + .atag_offset = 0x0100, .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index 98ca5b2e940d..9721f6111dc0 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -37,8 +37,7 @@ static void __init edb7211_reserve(void) } static void __init -fixup_edb7211(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) { /* * Bank start addresses are not present in the information @@ -57,7 +56,7 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") /* Maintainer: Jon McClintock */ - .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ + .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */ .fixup = fixup_edb7211, .map_io = edb7211_map_io, .reserve = edb7211_reserve, diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index b1cb479e71e9..d99256687298 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -57,8 +57,7 @@ typedef struct tag_IMAGE_PARAMS #define IMAGE_PARAMS_PHYS 0xC01F0000 static void __init -fortunet_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS); *cmdline = phys_to_virt(ip->command_line); @@ -75,7 +74,6 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags, MACHINE_START(FORTUNET, "ARM-FortuNet") /* Maintainer: FortuNet Inc. */ - .boot_params = 0x00000000, .fixup = fortunet_fixup, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 507c6873b7ee..b802e8a51831 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <asm/hardware/clps7111.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp #ifndef CONFIG_DEBUG_CLPS711X_UART2 mov \rp, #0x0000 @ UART1 #else diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index cefbce0480b9..6ecea95f38b2 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -56,8 +56,7 @@ static struct map_desc p720t_io_desc[] __initdata = { }; static void __init -fixup_p720t(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) { /* * Our bootloader doesn't setup any tags (yet). @@ -89,7 +88,7 @@ static void __init p720t_map_io(void) MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .fixup = fixup_p720t, .map_io = p720t_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot index 777012865220..d079de0b6e3b 100644 --- a/arch/arm/mach-cns3xxx/Makefile.boot +++ b/arch/arm/mach-cns3xxx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 3e7d1496cb47..55f7b4b08ab9 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -197,7 +197,7 @@ static void __init cns3420_map_io(void) } MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .timer = &cns3xxx_timer, diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S index 56d828634db5..d04c150baa1c 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ - .macro addruart,rp,rv + .macro addruart,rp,rv,tmp mov \rp, #0x00009000 orr \rv, \rp, #0xf0000000 @ virtual base orr \rp, \rp, #0x10000000 diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90afe..d87bfc397d39 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h deleted file mode 100644 index dc16c5c5d86b..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#define __phys_to_bus(x) ((x) + PHYS_OFFSET) -#define __bus_to_phys(x) ((x) - PHYS_OFFSET) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf4..4f16c9b79f78 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f7..a91b6058ab4f 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 06fd25d70aec..0f8fca48a5ed 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 0b87a1ca2bb3..495e31306fc0 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o dma.o usb.o common.o sram.o aemif.o + dma.o usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o @@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o -obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot index db97ef2c6477..04a6c4e67b14 100644 --- a/arch/arm/mach-davinci/Makefile.boot +++ b/arch/arm/mach-davinci/Makefile.boot @@ -2,12 +2,12 @@ ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y) ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y) $(error Cannot enable DaVinci and DA8XX platforms concurrently) else - zreladdr-y := 0xc0008000 + zreladdr-y += 0xc0008000 params_phys-y := 0xc0000100 initrd_phys-y := 0xc0800000 endif else - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 endif diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 84fd78684868..26d94c0b555c 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -676,7 +676,7 @@ static void __init da830_evm_map_io(void) } MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = da830_evm_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c88..6e41cb5baeb4 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1263,7 +1291,7 @@ static void __init da850_evm_map_io(void) } MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = da850_evm_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 241a6bd67408..65566280b7c9 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -351,7 +351,7 @@ static __init void dm355_evm_init(void) } MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = dm355_evm_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index bee284ca7fd6..b307470b071d 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -270,7 +270,7 @@ static __init void dm355_leopard_init(void) } MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = dm355_leopard_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 9818f214d4f0..04c43abcca66 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -612,7 +612,7 @@ static __init void dm365_evm_init(void) } MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = dm365_evm_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 95607a191e03..a005e7691ddd 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -712,7 +712,7 @@ static __init void davinci_evm_init(void) MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ - .boot_params = (DAVINCI_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = davinci_evm_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 993a3146fd35..337c45e3e44d 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -792,7 +792,7 @@ static __init void evm_init(void) } MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = davinci_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, @@ -801,7 +801,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = davinci_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index c278226627ad..6efc84cceca0 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -566,7 +566,7 @@ static void __init mityomapl138_map_io(void) } MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = mityomapl138_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index d60a80028ba3..38d6f644d8b9 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -272,7 +272,7 @@ static __init void davinci_ntosd2_init(void) MACHINE_START(NEUROS_OSD2, "Neuros OSD2") /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ - .boot_params = (DAVINCI_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = davinci_ntosd2_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 237332a11421..c6701e4a795c 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -338,7 +338,7 @@ static void __init omapl138_hawk_map_io(void) } MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = omapl138_hawk_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 5f4385c0a089..5dd4da9d2308 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -151,7 +151,7 @@ static __init void davinci_sffsdr_init(void) MACHINE_START(SFFSDR, "Lyrtech SFFSDR") /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ - .boot_params = (DAVINCI_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 782892065682..90ee7b5aabdc 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -277,7 +277,7 @@ console_initcall(tnetv107x_evm_console_init); #endif MACHINE_START(TNETV107X, "TNETV107X EVM") - .boot_params = (TNETV107X_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = tnetv107x_init, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 1d2557394235..865ffe5899ac 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -12,6 +12,7 @@ #include <linux/io.h> #include <linux/etherdevice.h> #include <linux/davinci_emac.h> +#include <linux/dma-mapping.h> #include <asm/tlb.h> #include <asm/mach/map.h> @@ -86,6 +87,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) iotable_init(davinci_soc_info.io_desc, davinci_soc_info.io_desc_num); + init_consistent_dma_size(14 << 20); + /* * Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index bd59f31b8a95..0b314bf16f7f 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -19,7 +19,7 @@ #include <asm/proc-fns.h> #include <mach/cpuidle.h> -#include <mach/memory.h> +#include <mach/ddr2.h> #define DAVINCI_CPUIDLE_MAX_STATES 2 diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 2ed2f822fc40..a6bf5dcaef13 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,6 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> @@ -19,7 +20,7 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/gpio.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 935dbed5c541..4aae01576aab 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,6 +11,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/platform_device.h> @@ -27,7 +28,7 @@ #include <mach/da8xx.h> #include <mach/cpufreq.h> #include <mach/pm.h> -#include <mach/gpio.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a3a94e9c9378..c143f43addcc 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,7 +13,6 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> @@ -30,6 +29,7 @@ #include <mach/common.h> #include <mach/asp.h> #include <mach/spi.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 4604e72d7d99..679e168dce34 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -17,7 +17,6 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> #include <asm/mach/map.h> @@ -34,7 +33,7 @@ #include <mach/asp.h> #include <mach/keyscan.h> #include <mach/spi.h> - +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4c82c2716293..9a274665edc5 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -12,7 +12,6 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <asm/mach/map.h> @@ -26,6 +25,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 1802e711a2b8..03e5f4931b42 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -13,7 +13,6 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <asm/mach/map.h> @@ -27,6 +26,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c deleted file mode 100644 index 3fa3e2867e19..000000000000 --- a/arch/arm/mach-davinci/gpio-tnetv107x.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Texas Instruments TNETV107X GPIO Controller - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/gpio.h> - -#include <mach/common.h> -#include <mach/tnetv107x.h> - -struct tnetv107x_gpio_regs { - u32 idver; - u32 data_in[3]; - u32 data_out[3]; - u32 direction[3]; - u32 enable[3]; -}; - -#define gpio_reg_index(gpio) ((gpio) >> 5) -#define gpio_reg_bit(gpio) BIT((gpio) & 0x1f) - -#define gpio_reg_rmw(reg, mask, val) \ - __raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg)) - -#define gpio_reg_set_bit(reg, gpio) \ - gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio)) - -#define gpio_reg_clear_bit(reg, gpio) \ - gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0) - -#define gpio_reg_get_bit(reg, gpio) \ - (__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio)) - -#define chip2controller(chip) \ - container_of(chip, struct davinci_gpio_controller, chip) - -#define TNETV107X_GPIO_CTLRS DIV_ROUND_UP(TNETV107X_N_GPIO, 32) - -static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS]; - -static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - gpio_reg_set_bit(regs->enable, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); - - return 0; -} - -static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - gpio_reg_clear_bit(regs->enable, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); -} - -static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - gpio_reg_set_bit(regs->direction, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); - - return 0; -} - -static int tnetv107x_gpio_dir_out(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - if (value) - gpio_reg_set_bit(regs->data_out, gpio); - else - gpio_reg_clear_bit(regs->data_out, gpio); - - gpio_reg_clear_bit(regs->direction, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); - - return 0; -} - -static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - int ret; - - ret = gpio_reg_get_bit(regs->data_in, gpio); - - return ret ? 1 : 0; -} - -static void tnetv107x_gpio_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - if (value) - gpio_reg_set_bit(regs->data_out, gpio); - else - gpio_reg_clear_bit(regs->data_out, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); -} - -static int __init tnetv107x_gpio_setup(void) -{ - int i, base; - unsigned ngpio; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct tnetv107x_gpio_regs *regs; - struct davinci_gpio_controller *ctlr; - - if (soc_info->gpio_type != GPIO_TYPE_TNETV107X) - return 0; - - ngpio = soc_info->gpio_num; - if (ngpio == 0) { - pr_err("GPIO setup: how many GPIOs?\n"); - return -EINVAL; - } - - if (WARN_ON(TNETV107X_N_GPIO < ngpio)) - ngpio = TNETV107X_N_GPIO; - - regs = ioremap(soc_info->gpio_base, SZ_4K); - if (WARN_ON(!regs)) - return -EINVAL; - - for (i = 0, base = 0; base < ngpio; i++, base += 32) { - ctlr = &chips[i]; - - ctlr->chip.label = "tnetv107x"; - ctlr->chip.can_sleep = 0; - ctlr->chip.base = base; - ctlr->chip.ngpio = ngpio - base; - if (ctlr->chip.ngpio > 32) - ctlr->chip.ngpio = 32; - - ctlr->chip.request = tnetv107x_gpio_request; - ctlr->chip.free = tnetv107x_gpio_free; - ctlr->chip.direction_input = tnetv107x_gpio_dir_in; - ctlr->chip.get = tnetv107x_gpio_get; - ctlr->chip.direction_output = tnetv107x_gpio_dir_out; - ctlr->chip.set = tnetv107x_gpio_set; - - spin_lock_init(&ctlr->lock); - - ctlr->regs = regs; - ctlr->set_data = ®s->data_out[i]; - ctlr->clr_data = ®s->data_out[i]; - ctlr->in_data = ®s->data_in[i]; - - gpiochip_add(&ctlr->chip); - } - - soc_info->gpio_ctlrs = chips; - soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); - return 0; -} -pure_initcall(tnetv107x_gpio_setup); diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c deleted file mode 100644 index cafbe13a82a5..000000000000 --- a/arch/arm/mach-davinci/gpio.c +++ /dev/null @@ -1,460 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006-2007 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/gpio.h> - -#include <asm/mach/irq.h> - -struct davinci_gpio_regs { - u32 dir; - u32 out_data; - u32 set_data; - u32 clr_data; - u32 in_data; - u32 set_rising; - u32 clr_rising; - u32 set_falling; - u32 clr_falling; - u32 intstat; -}; - -#define chip2controller(chip) \ - container_of(chip, struct davinci_gpio_controller, chip) - -static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; -static void __iomem *gpio_base; - -static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio) -{ - void __iomem *ptr; - - if (gpio < 32 * 1) - ptr = gpio_base + 0x10; - else if (gpio < 32 * 2) - ptr = gpio_base + 0x38; - else if (gpio < 32 * 3) - ptr = gpio_base + 0x60; - else if (gpio < 32 * 4) - ptr = gpio_base + 0x88; - else if (gpio < 32 * 5) - ptr = gpio_base + 0xb0; - else - ptr = NULL; - return ptr; -} - -static inline struct davinci_gpio_regs __iomem *irq2regs(int irq) -{ - struct davinci_gpio_regs __iomem *g; - - g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq); - - return g; -} - -static int __init davinci_gpio_irq_setup(void); - -/*--------------------------------------------------------------------------*/ - -/* board setup code *MUST* setup pinmux and enable the GPIO clock. */ -static inline int __davinci_direction(struct gpio_chip *chip, - unsigned offset, bool out, int value) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - struct davinci_gpio_regs __iomem *g = d->regs; - unsigned long flags; - u32 temp; - u32 mask = 1 << offset; - - spin_lock_irqsave(&d->lock, flags); - temp = __raw_readl(&g->dir); - if (out) { - temp &= ~mask; - __raw_writel(mask, value ? &g->set_data : &g->clr_data); - } else { - temp |= mask; - } - __raw_writel(temp, &g->dir); - spin_unlock_irqrestore(&d->lock, flags); - - return 0; -} - -static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) -{ - return __davinci_direction(chip, offset, false, 0); -} - -static int -davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) -{ - return __davinci_direction(chip, offset, true, value); -} - -/* - * Read the pin's value (works even if it's set up as output); - * returns zero/nonzero. - * - * Note that changes are synched to the GPIO clock, so reading values back - * right after you've set them may give old values. - */ -static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - struct davinci_gpio_regs __iomem *g = d->regs; - - return (1 << offset) & __raw_readl(&g->in_data); -} - -/* - * Assuming the pin is muxed as a gpio output, set its output value. - */ -static void -davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - struct davinci_gpio_regs __iomem *g = d->regs; - - __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data); -} - -static int __init davinci_gpio_setup(void) -{ - int i, base; - unsigned ngpio; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct davinci_gpio_regs *regs; - - if (soc_info->gpio_type != GPIO_TYPE_DAVINCI) - return 0; - - /* - * The gpio banks conceptually expose a segmented bitmap, - * and "ngpio" is one more than the largest zero-based - * bit index that's valid. - */ - ngpio = soc_info->gpio_num; - if (ngpio == 0) { - pr_err("GPIO setup: how many GPIOs?\n"); - return -EINVAL; - } - - if (WARN_ON(DAVINCI_N_GPIO < ngpio)) - ngpio = DAVINCI_N_GPIO; - - gpio_base = ioremap(soc_info->gpio_base, SZ_4K); - if (WARN_ON(!gpio_base)) - return -ENOMEM; - - for (i = 0, base = 0; base < ngpio; i++, base += 32) { - chips[i].chip.label = "DaVinci"; - - chips[i].chip.direction_input = davinci_direction_in; - chips[i].chip.get = davinci_gpio_get; - chips[i].chip.direction_output = davinci_direction_out; - chips[i].chip.set = davinci_gpio_set; - - chips[i].chip.base = base; - chips[i].chip.ngpio = ngpio - base; - if (chips[i].chip.ngpio > 32) - chips[i].chip.ngpio = 32; - - spin_lock_init(&chips[i].lock); - - regs = gpio2regs(base); - chips[i].regs = regs; - chips[i].set_data = ®s->set_data; - chips[i].clr_data = ®s->clr_data; - chips[i].in_data = ®s->in_data; - - gpiochip_add(&chips[i].chip); - } - - soc_info->gpio_ctlrs = chips; - soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); - - davinci_gpio_irq_setup(); - return 0; -} -pure_initcall(davinci_gpio_setup); - -/*--------------------------------------------------------------------------*/ -/* - * We expect irqs will normally be set up as input pins, but they can also be - * used as output pins ... which is convenient for testing. - * - * NOTE: The first few GPIOs also have direct INTC hookups in addition - * to their GPIOBNK0 irq, with a bit less overhead. - * - * All those INTC hookups (direct, plus several IRQ banks) can also - * serve as EDMA event triggers. - */ - -static void gpio_irq_disable(struct irq_data *d) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - - __raw_writel(mask, &g->clr_falling); - __raw_writel(mask, &g->clr_rising); -} - -static void gpio_irq_enable(struct irq_data *d) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - unsigned status = irqd_get_trigger_type(d); - - status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; - if (!status) - status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; - - if (status & IRQ_TYPE_EDGE_FALLING) - __raw_writel(mask, &g->set_falling); - if (status & IRQ_TYPE_EDGE_RISING) - __raw_writel(mask, &g->set_rising); -} - -static int gpio_irq_type(struct irq_data *d, unsigned trigger) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - - if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - return -EINVAL; - - return 0; -} - -static struct irq_chip gpio_irqchip = { - .name = "GPIO", - .irq_enable = gpio_irq_enable, - .irq_disable = gpio_irq_disable, - .irq_set_type = gpio_irq_type, - .flags = IRQCHIP_SET_TYPE_MASKED, -}; - -static void -gpio_irq_handler(unsigned irq, struct irq_desc *desc) -{ - struct davinci_gpio_regs __iomem *g; - u32 mask = 0xffff; - struct davinci_gpio_controller *d; - - d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); - g = (struct davinci_gpio_regs __iomem *)d->regs; - - /* we only care about one bank */ - if (irq & 1) - mask <<= 16; - - /* temporarily mask (level sensitive) parent IRQ */ - desc->irq_data.chip->irq_mask(&desc->irq_data); - desc->irq_data.chip->irq_ack(&desc->irq_data); - while (1) { - u32 status; - int n; - int res; - - /* ack any irqs */ - status = __raw_readl(&g->intstat) & mask; - if (!status) - break; - __raw_writel(status, &g->intstat); - - /* now demux them to the right lowlevel handler */ - n = d->irq_base; - if (irq & 1) { - n += 16; - status >>= 16; - } - - while (status) { - res = ffs(status); - n += res; - generic_handle_irq(n - 1); - status >>= res; - } - } - desc->irq_data.chip->irq_unmask(&desc->irq_data); - /* now it may re-trigger */ -} - -static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - - if (d->irq_base >= 0) - return d->irq_base + offset; - else - return -ENODEV; -} - -static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - /* NOTE: we assume for now that only irqs in the first gpio_chip - * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). - */ - if (offset < soc_info->gpio_unbanked) - return soc_info->gpio_irq + offset; - else - return -ENODEV; -} - -static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - - if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - return -EINVAL; - - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); - - return 0; -} - -/* - * NOTE: for suspend/resume, probably best to make a platform_device with - * suspend_late/resume_resume calls hooking into results of the set_wake() - * calls ... so if no gpios are wakeup events the clock can be disabled, - * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * (dm6446) can be set appropriately for GPIOV33 pins. - */ - -static int __init davinci_gpio_irq_setup(void) -{ - unsigned gpio, irq, bank; - struct clk *clk; - u32 binten = 0; - unsigned ngpio, bank_irq; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct davinci_gpio_regs __iomem *g; - - ngpio = soc_info->gpio_num; - - bank_irq = soc_info->gpio_irq; - if (bank_irq == 0) { - printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); - return -EINVAL; - } - - clk = clk_get(NULL, "gpio"); - if (IS_ERR(clk)) { - printk(KERN_ERR "Error %ld getting gpio clock?\n", - PTR_ERR(clk)); - return PTR_ERR(clk); - } - clk_enable(clk); - - /* Arrange gpio_to_irq() support, handling either direct IRQs or - * banked IRQs. Having GPIOs in the first GPIO bank use direct - * IRQs, while the others use banked IRQs, would need some setup - * tweaks to recognize hardware which can do that. - */ - for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) { - chips[bank].chip.to_irq = gpio_to_irq_banked; - chips[bank].irq_base = soc_info->gpio_unbanked - ? -EINVAL - : (soc_info->intc_irq_num + gpio); - } - - /* - * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO - * controller only handling trigger modes. We currently assume no - * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. - */ - if (soc_info->gpio_unbanked) { - static struct irq_chip gpio_irqchip_unbanked; - - /* pass "bank 0" GPIO IRQs to AINTC */ - chips[0].chip.to_irq = gpio_to_irq_unbanked; - binten = BIT(0); - - /* AINTC handles mask/unmask; GPIO handles triggering */ - irq = bank_irq; - gpio_irqchip_unbanked = *irq_get_chip(irq); - gpio_irqchip_unbanked.name = "GPIO-AINTC"; - gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked; - - /* default trigger: both edges */ - g = gpio2regs(0); - __raw_writel(~0, &g->set_falling); - __raw_writel(~0, &g->set_rising); - - /* set the direct IRQs up to use that irqchip */ - for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { - irq_set_chip(irq, &gpio_irqchip_unbanked); - irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); - irq_set_chip_data(irq, (__force void *)g); - irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); - } - - goto done; - } - - /* - * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we - * then chain through our own handler. - */ - for (gpio = 0, irq = gpio_to_irq(0), bank = 0; - gpio < ngpio; - bank++, bank_irq++) { - unsigned i; - - /* disabled by default, enabled only as needed */ - g = gpio2regs(gpio); - __raw_writel(~0, &g->clr_falling); - __raw_writel(~0, &g->clr_rising); - - /* set up all irqs in this bank */ - irq_set_chained_handler(bank_irq, gpio_irq_handler); - - /* - * Each chip handles 32 gpios, and each irq bank consists of 16 - * gpio irqs. Pass the irq bank's corresponding controller to - * the chained irq handler. - */ - irq_set_handler_data(bank_irq, &chips[gpio / 32]); - - for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { - irq_set_chip(irq, &gpio_irqchip); - irq_set_chip_data(irq, (__force void *)g); - irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); - irq_set_handler(irq, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - } - - binten |= BIT(bank); - } - -done: - /* BINTEN -- per-bank interrupt enable. genirq would also let these - * bits be set/cleared dynamically. - */ - __raw_writel(binten, gpio_base + 0x08); - - printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); - - return 0; -} diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h new file mode 100644 index 000000000000..c19e047d0e6a --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/ddr2.h @@ -0,0 +1,4 @@ +#define DDR2_SDRCR_OFFSET 0xc +#define DDR2_SRPD_BIT (1 << 23) +#define DDR2_MCLKSTOPEN_BIT (1 << 30) +#define DDR2_LPMODEN_BIT (1 << 31) diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index f8b7ea4f6235..cf94552d5274 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -18,56 +18,50 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <mach/serial.h> #define UART_SHIFT 2 -#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 .popsection - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use davinci_uart_phys/virt if already configured */ -10: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) - ldrne \rp, =davinci_uart_phys - add \rv, \rp, #4 @ davinci_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +10: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ davinci_uart_phys + ldr \rv, [\tmp, #4] @ davinci_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART address set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? + and \rp, pc, #0xff000000 + ldr \rv, =DAVINCI_UART_INFO_OFS + add \rp, \rp, \rv /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) - ldrne \rv, =davinci_uart_phys - ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) - ldr \rp, [\rp, #0] - str \rp, [\rv] + ldr \rv, [\rp, #0] + str \rv, [\tmp, #0] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) - ldrne \rv, =davinci_uart_virt - ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) - ldr \rp, [\rp, #4] - str \rp, [\rv] + ldr \rv, [\rp, #4] + str \rv, [\tmp, #4] b 10b -99: + + .align +99: .word . + .word davinci_uart_phys + .ltorg + +100: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h new file mode 100644 index 000000000000..1fdd1fd35448 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h @@ -0,0 +1,91 @@ +/* + * TI DaVinci GPIO Support + * + * Copyright (c) 2006 David Brownell + * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DAVINCI_DAVINCI_GPIO_H +#define __DAVINCI_DAVINCI_GPIO_H + +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm-generic/gpio.h> + +#include <mach/irqs.h> +#include <mach/common.h> + +#define DAVINCI_GPIO_BASE 0x01C67000 + +enum davinci_gpio_type { + GPIO_TYPE_DAVINCI = 0, + GPIO_TYPE_TNETV107X, +}; + +/* + * basic gpio routines + * + * board-specific init should be done by arch/.../.../board-XXX.c (maybe + * initializing banks together) rather than boot loaders; kexec() won't + * go through boot loaders. + * + * the gpio clock will be turned on when gpios are used, and you may also + * need to pay attention to PINMUX registers to be sure those pins are + * used as gpios, not with other peripherals. + * + * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. + * + * GPIOs can also be on external chips, numbered after the ones built-in + * to the DaVinci chip. For now, they won't be usable as IRQ sources. + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +struct davinci_gpio_controller { + struct gpio_chip chip; + int irq_base; + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; +}; + +/* The __gpio_to_controller() and __gpio_mask() functions inline to constants + * with constant parameters; or in outlined code they execute at runtime. + * + * You'd access the controller directly when reading or writing more than + * one gpio value at a time, and to support wired logic where the value + * being driven by the cpu need not match the value read back. + * + * These are NOT part of the cross-platform GPIO interface + */ +static inline struct davinci_gpio_controller * +__gpio_to_controller(unsigned gpio) +{ + struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; + int index = gpio / 32; + + if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) + return NULL; + + return ctlrs + index; +} + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} + +#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index fbece126c2bf..fbaae4772b91 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -13,80 +13,10 @@ #ifndef __DAVINCI_GPIO_H #define __DAVINCI_GPIO_H -#include <linux/io.h> -#include <linux/spinlock.h> - #include <asm-generic/gpio.h> -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} +/* The inline versions use the static inlines in the driver header */ +#include "gpio-davinci.h" /* * The get/set/clear functions will inline when called with constant @@ -147,11 +77,6 @@ static inline int gpio_cansleep(unsigned gpio) return __gpio_cansleep(gpio); } -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { /* don't support the reverse mapping */ diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h deleted file mode 100644 index 78731944a70c..000000000000 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * DaVinci memory space definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/************************************************************************** - * Included Files - **************************************************************************/ -#include <asm/page.h> -#include <asm/sizes.h> - -/************************************************************************** - * Definitions - **************************************************************************/ -#define DAVINCI_DDR_BASE 0x80000000 -#define DA8XX_DDR_BASE 0xc0000000 - -#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) -#error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_ARCH_DAVINCI_DA8XX) -#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE -#else -#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE -#endif - -#define DDR2_SDRCR_OFFSET 0xc -#define DDR2_SRPD_BIT BIT(23) -#define DDR2_MCLKSTOPEN_BIT BIT(30) -#define DDR2_LPMODEN_BIT BIT(31) - -/* - * Increase size of DMA-consistent memory region - */ -#define CONSISTENT_DMA_SIZE (14<<20) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e7..fa59c097223d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index c9e6ce185a66..e347d88fef91 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -21,8 +21,9 @@ * macros in debug-macro.S. * * This area sits just below the page tables (see arch/arm/kernel/head.S). + * We define it as a relative offset from start of usable RAM. */ -#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO_OFS 0x3ff8 #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 78d80683cdc2..9dc7cf9664fe 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -43,7 +43,12 @@ static inline void flush(void) static inline void set_uart_info(u32 phys, void * __iomem virt) { - u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS); uart = (u32 *)phys; uart_info[0] = phys; diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b0..d4e9316ecacb 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -22,7 +22,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/psc.h> -#include <mach/memory.h> +#include <mach/ddr2.h> #include "clock.h" @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 1b28fdd892a6..409bb869c7c7 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -12,6 +12,7 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> @@ -27,9 +28,9 @@ #include <mach/psc.h> #include <mach/cp_intc.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/hardware.h> #include <mach/tnetv107x.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 67039c3e0c48..760a0efe7580 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c index 03e11f9dca97..c8a406f7e946 100644 --- a/arch/arm/mach-dove/cm-a510.c +++ b/arch/arm/mach-dove/cm-a510.c @@ -87,7 +87,7 @@ static void __init cm_a510_init(void) } MACHINE_START(CM_A510, "Compulab CM-A510 Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = cm_a510_init, .map_io = dove_map_io, .init_early = dove_init_early, diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index 2ac34ecfa745..11ea34e4fc76 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -94,7 +94,7 @@ static void __init dove_db_init(void) } MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dove_db_init, .map_io = dove_map_io, .init_early = dove_init_early, diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S index da8bf2bad3b1..5929cbc59161 100644 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =DOVE_SB_REGS_PHYS_BASE ldr \rv, =DOVE_SB_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h deleted file mode 100644 index bbc93fee6c75..000000000000 --- a/arch/arm/mach-dove/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot index 232126044935..83cf07c38ada 100644 --- a/arch/arm/mach-ebsa110/Makefile.boot +++ b/arch/arm/mach-ebsa110/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000400 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 087bc771ac23..d0ce8abdd4b6 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -280,7 +280,7 @@ arch_initcall(ebsa110_init); MACHINE_START(EBSA110, "EBSA110") /* Maintainer: Russell King */ - .boot_params = 0x00000400, + .atag_offset = 0x400, .reserve_lp0 = 1, .reserve_lp2 = 1, .soft_reboot = 1, diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S index 7ef5690fd08c..bb02c05e6812 100644 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * **/ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xf0000000 orr \rp, \rp, #0x00000be0 mov \rp, \rv diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h index f68daa632af0..44679db672fb 100644 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ b/arch/arm/mach-ebsa110/include/mach/io.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - u8 __inb8(unsigned int port); void __outb8(u8 val, unsigned int port); diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index 0ad33f15c622..d3113a71cb40 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,14 +1,14 @@ - zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000 + zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000 params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 - zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 + zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 - zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000 + zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000 params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 - zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000 + zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000 params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 - zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000 + zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000 params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 61b98ce4b673..0713448206a5 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -33,7 +33,7 @@ static void __init adssphere_init_machine(void) MACHINE_START(ADSSPHERE, "ADS Sphere board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index c60f081e930b..94c78bc66275 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -38,6 +38,7 @@ #include <mach/fb.h> #include <mach/ep93xx_keypad.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 9969bb115f60..70ef8c527d27 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -159,6 +160,11 @@ static void __init edb93xx_register_spi(void) /************************************************************************* * EDB93xx I2S *************************************************************************/ +static struct platform_device edb93xx_audio_device = { + .name = "edb93xx-audio", + .id = -1, +}; + static int __init edb93xx_has_audio(void) { return (machine_is_edb9301() || machine_is_edb9302() || @@ -170,6 +176,7 @@ static void __init edb93xx_register_i2s(void) { if (edb93xx_has_audio()) { ep93xx_register_i2s(); + platform_device_register(&edb93xx_audio_device); } } @@ -240,7 +247,7 @@ static void __init edb93xx_init_machine(void) #ifdef CONFIG_MACH_EDB9301 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -251,7 +258,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") /* Maintainer: George Kashperko <george@chas.com.ua> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -262,7 +269,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302A MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -273,7 +280,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -284,7 +291,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307A MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -295,7 +302,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9312 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -306,7 +313,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -317,7 +324,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315A MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 9bd3152bff9a..45ee205856f8 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -33,7 +33,7 @@ static void __init gesbc9312_init_machine(void) MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index b25bc9076367..af54e43132cf 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base orr \rp, \rp, #0x000c0000 diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h new file mode 100644 index 000000000000..8aff2ea35877 --- /dev/null +++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h @@ -0,0 +1,100 @@ +/* Include file for the EP93XX GPIO controller machine specifics */ + +#ifndef __GPIO_EP93XX_H +#define __GPIO_EP93XX_H + +/* GPIO port A. */ +#define EP93XX_GPIO_LINE_A(x) ((x) + 0) +#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) +#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) +#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) +#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) +#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) +#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) +#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) +#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) + +/* GPIO port B. */ +#define EP93XX_GPIO_LINE_B(x) ((x) + 8) +#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) +#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) +#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) +#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) +#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) +#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) +#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) +#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) + +/* GPIO port C. */ +#define EP93XX_GPIO_LINE_C(x) ((x) + 40) +#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) +#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) +#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) +#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) +#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) +#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) +#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) +#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) + +/* GPIO port D. */ +#define EP93XX_GPIO_LINE_D(x) ((x) + 24) +#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) +#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) +#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) +#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) +#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) +#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) +#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) +#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) + +/* GPIO port E. */ +#define EP93XX_GPIO_LINE_E(x) ((x) + 32) +#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) +#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) +#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) +#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) +#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) +#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) +#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) +#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) + +/* GPIO port F. */ +#define EP93XX_GPIO_LINE_F(x) ((x) + 16) +#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) +#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) +#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) +#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) +#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) +#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) +#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) +#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) + +/* GPIO port G. */ +#define EP93XX_GPIO_LINE_G(x) ((x) + 48) +#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) +#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) +#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) +#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) +#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) +#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) +#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) +#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) + +/* GPIO port H. */ +#define EP93XX_GPIO_LINE_H(x) ((x) + 56) +#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) +#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) +#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) +#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) +#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) +#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) +#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) +#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) + +/* maximum value for gpio line identifiers */ +#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) + +/* maximum value for irq capable line identifiers */ +#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) + +#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index c57152c231f1..40a8c178f10d 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -1,120 +1 @@ -/* - * arch/arm/mach-ep93xx/include/mach/gpio.h - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -#define gpio_to_irq(gpio) \ - (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) - -#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) - -#endif +/* empty */ diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec62cd9d..f1397a13e76b 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 7adea6258efe..e72f7368876e 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -77,7 +77,7 @@ static void __init micro9_init_machine(void) #ifdef CONFIG_MACH_MICRO9H MACHINE_START(MICRO9, "Contec Micro9-High") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -88,7 +88,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9M MACHINE_START(MICRO9M, "Contec Micro9-Mid") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -99,7 +99,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9L MACHINE_START(MICRO9L, "Contec Micro9-Lite") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -110,7 +110,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9S MACHINE_START(MICRO9S, "Contec Micro9-Slim") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 8392e95d7cea..52e090dc9d27 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -18,12 +18,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -53,6 +53,17 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = { }, }; +static struct platform_device simone_audio_device = { + .name = "simone-audio", + .id = -1, +}; + +static void __init simone_register_audio(void) +{ + ep93xx_register_ac97(); + platform_device_register(&simone_audio_device); +} + static void __init simone_init_machine(void) { ep93xx_init_devices(); @@ -61,12 +72,12 @@ static void __init simone_init_machine(void) ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); - ep93xx_register_ac97(); + simone_register_audio(); } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") -/* Maintainer: Ryan Mallon */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + /* Maintainer: Ryan Mallon */ + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 2e9c614757e4..8121e3aedc0a 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/fb.h> @@ -30,6 +29,7 @@ #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -150,6 +150,17 @@ static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { .bpp = 16, }; +static struct platform_device snappercl15_audio_device = { + .name = "snappercl15-audio", + .id = -1, +}; + +static void __init snappercl15_register_audio(void) +{ + ep93xx_register_i2s(); + platform_device_register(&snappercl15_audio_device); +} + static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); @@ -157,13 +168,13 @@ static void __init snappercl15_init_machine(void) ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); - ep93xx_register_i2s(); + snappercl15_register_audio(); platform_device_register(&snappercl15_nand_device); } MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") /* Maintainer: Ryan Mallon */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c2d2cf40ead9..1ade3c340507 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -257,7 +257,7 @@ static void __init ts72xx_init_machine(void) MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab99fa16..fc1f92dfbea8 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -12,6 +12,7 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool select S3C_PL330_DMA + select ARM_CPU_SUSPEND if PM help Enable EXYNOS4210 CPU support diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot index d65956ffb43d..b9862e22bf10 100644 --- a/arch/arm/mach-exynos4/Makefile.boot +++ b/arch/arm/mach-exynos4/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x40008000 + zreladdr-y += 0x40008000 params_phys-y := 0x40000100 diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 851dea018578..86964d2e9e1b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -520,7 +520,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 21), }, { .name = "ac97", - .id = -1, + .devname = "samsung-ac97", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { @@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 2d8a40c9e6e5..746d6fc6d397 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -24,12 +24,13 @@ #include <plat/exynos4.h> #include <plat/adc-core.h> #include <plat/sdhci.h> -#include <plat/devs.h> #include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/reset.h> #include <mach/regs-irq.h> +#include <mach/regs-pmu.h> extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); @@ -128,6 +129,11 @@ static void exynos4_idle(void) local_irq_enable(); } +static void exynos4_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* * exynos4_map_io * @@ -241,5 +247,8 @@ int __init exynos4_init(void) /* set idle function */ pm_idle = exynos4_idle; + /* set sw_reset function */ + s5p_reset_hook = exynos4_sw_reset; + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index a442ef861167..6cacf16a67a6 100644 --- a/arch/arm/mach-exynos4/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -20,7 +20,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index d7a1e281ce7a..006a4f4c65c6 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -55,7 +55,7 @@ bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #29 + cmp \irqnr, #15 cmpcc \irqnr, \irqnr cmpne \irqnr, \tmp cmpcs \irqnr, \irqnr @@ -76,8 +76,3 @@ strcc \irqstat, [\base, #GIC_CPU_EOI] cmpcs \irqnr, \irqnr .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - .endm diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index be9266b10fdb..80523ca9bb49 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ @@ -151,6 +146,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 934d2a493982..f8952f8f3757 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -80,9 +80,8 @@ #define IRQ_HSMMC3 IRQ_SPI(76) #define IRQ_DWMCI IRQ_SPI(77) -#define IRQ_MIPICSI0 IRQ_SPI(78) - -#define IRQ_MIPICSI1 IRQ_SPI(80) +#define IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define IRQ_MIPI_CSIS1 IRQ_SPI(80) #define IRQ_ONENAND_AUDI IRQ_SPI(82) #define IRQ_ROTATOR IRQ_SPI(83) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index fa49bbb8e7b0..cdf9b47c303c 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -29,6 +29,8 @@ #define S5P_USE_STANDBY_WFE1 (1 << 25) #define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_SWRESET S5P_PMUREG(0x0400) + #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 9d87d2ac7f68..badb8c66fc9b 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -23,6 +23,8 @@ #include <mach/regs-gpio.h> +#include <asm/mach/irq.h> + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; @@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start) static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); exynos4_irq_demux_eint(IRQ_EINT(16)); exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); } static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) @@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); chip->irq_mask(&desc->irq_data); if (chip->irq_ack) @@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) generic_handle_irq(*irq_data); chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } int __init exynos4_init_irq_eint(void) diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c index b482c6285fc4..f0ca6c157d29 100644 --- a/arch/arm/mach-exynos4/mach-armlex4210.c +++ b/arch/arm/mach-exynos4/mach-armlex4210.c @@ -207,7 +207,7 @@ static void __init armlex4210_machine_init(void) MACHINE_START(ARMLEX4210, "ARMLEX4210") /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, .init_machine = armlex4210_machine_init, diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 43be71b799cb..6e0536818bf5 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -1152,7 +1152,7 @@ static void __init nuri_machine_init(void) MACHINE_START(NURI, "NURI") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = nuri_map_io, .init_machine = nuri_machine_init, diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index a7c65e05c1eb..b24ddd7ad8fe 100644 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -301,7 +301,7 @@ static void __init smdkc210_machine_init(void) MACHINE_START(SMDKC210, "SMDKC210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdkc210_map_io, .init_machine = smdkc210_machine_init, diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index ea4149556860..d90fcddbee1f 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -255,7 +255,7 @@ static void __init smdkv310_machine_init(void) MACHINE_START(SMDKV310, "SMDKV310") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 0e280d12301e..2aac6f755c8e 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -79,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }; static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vddarm", NULL); + REGULATOR_SUPPLY("vdd_arm", NULL); static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), @@ -105,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { }; static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vddint", NULL); + REGULATOR_SUPPLY("vdd_int", NULL); static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); @@ -762,7 +762,7 @@ static void __init universal_machine_init(void) MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = universal_map_io, .init_machine = universal_machine_init, diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7b..582b874aab0e 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -380,23 +386,28 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) if (cpu == 0) { mct_tick0_event_irq.dev_id = &mct_tick[cpu]; + evt->irq = IRQ_MCT_L0; setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); } else { mct_tick1_event_irq.dev_id = &mct_tick[cpu]; + evt->irq = IRQ_MCT_L1; setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); } } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } -int local_timer_ack(void) +void local_timer_stop(struct clock_event_device *evt) { - return 0; + evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); + disable_irq(evt->irq); } #endif /* CONFIG_LOCAL_TIMERS */ diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba81..0c90896ad9a0 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) @@ -191,12 +193,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "EXYNOS4: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b9..39aca045f660 100644 --- a/arch/arm/mach-exynos4/setup-usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c @@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); writel(rstcon, EXYNOS4_RSTCON); - udelay(50); + udelay(80); clk_disable(otg_clk); clk_put(otg_clk); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index dc26fff22cf0..f643ef819da6 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -4,8 +4,8 @@ menu "Footbridge Implementations" config ARCH_CATS bool "CATS" - select CLKSRC_I8253 select CLKEVT_I8253 + select CLKSRC_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA @@ -61,6 +61,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" + select CLKEVT_I8253 select CLKSRC_I8253 select FOOTBRIDGE_HOST select ISA diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot index c7e75acfe6c9..ff0a4b5b0a82 100644 --- a/arch/arm/mach-footbridge/Makefile.boot +++ b/arch/arm/mach-footbridge/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 5b1a8db779be..d5f178540928 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -76,8 +76,7 @@ __initcall(cats_hw_init); * hard reboots fail on early boards. */ static void __init -fixup_cats(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) { screen_info.orig_video_lines = 25; screen_info.orig_video_points = 16; @@ -86,7 +85,7 @@ fixup_cats(struct machine_desc *desc, struct tag *tags, MACHINE_START(CATS, "Chalice-CATS") /* Maintainer: Philip Blundell */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .soft_reboot = 1, .fixup = fixup_cats, .map_io = footbridge_map_io, diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 1331fff51ae2..18c32a5541d9 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/system.h> diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 2ef69ff44ba8..012210cf7d16 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -15,7 +15,7 @@ MACHINE_START(EBSA285, "EBSA285") /* Maintainer: Russell King */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .video_start = 0x000a0000, .video_end = 0x000bffff, .map_io = footbridge_map_io, diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 1be2eeb7a0a0..e5acde25ffc5 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -15,7 +15,7 @@ #ifndef CONFIG_DEBUG_DC21285_PORT /* For NetWinder debugging */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x000003f8 orr \rv, \rp, #0xff000000 @ virtual orr \rp, \rp, #0x7c000000 @ physical @@ -31,7 +31,7 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp .if dc21285_low mov \rp, #dc21285_low .else diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index 15d54981674c..e3d6ccac2162 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -93,7 +93,7 @@ #define CPLD_FLASH_WR_ENABLE 1 #ifndef __ASSEMBLY__ -extern spinlock_t nw_gpio_lock; +extern raw_spinlock_t nw_gpio_lock; extern void nw_gpio_modify_op(unsigned int mask, unsigned int set); extern void nw_gpio_modify_io(unsigned int mask, unsigned int in); extern unsigned int nw_gpio_read(void); diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index 32e4cc397c28..15a70396c27d 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -23,8 +23,6 @@ #define PCIO_SIZE 0x00100000 #define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) -#define IO_SPACE_LIMIT 0xffff - /* * Translation of various region addresses to virtual addresses */ diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 06e514f372d0..0d3846f3b60d 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -68,7 +68,7 @@ static inline void wb977_ww(int reg, int val) /* * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE */ -DEFINE_SPINLOCK(nw_gpio_lock); +DEFINE_RAW_SPINLOCK(nw_gpio_lock); EXPORT_SYMBOL(nw_gpio_lock); static unsigned int current_gpio_op; @@ -327,9 +327,9 @@ static inline void wb977_init_gpio(void) /* * Set Group1/Group2 outputs */ - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } /* @@ -390,9 +390,9 @@ static void __init cpld_init(void) { unsigned long flags; - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } static unsigned char rwa_unlock[] __initdata = @@ -616,9 +616,9 @@ static int __init nw_hw_init(void) cpld_init(); rwa010_init(); - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } return 0; } @@ -631,8 +631,7 @@ __initcall(nw_hw_init); * the parameter page. */ static void __init -fixup_netwinder(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) { #ifdef CONFIG_ISAPNP extern int isapnp_disable; @@ -648,7 +647,7 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags, MACHINE_START(NETWINDER, "Rebel-NetWinder") /* Maintainer: Russell King/Rebel.com */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .video_start = 0x000a0000, .video_end = 0x000bffff, .reserve_lp0 = 1, diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c index 00269fe0be8a..e57102e871fc 100644 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ b/arch/arm/mach-footbridge/netwinder-leds.c @@ -31,13 +31,13 @@ static char led_state; static char hw_led_state; -static DEFINE_SPINLOCK(leds_lock); +static DEFINE_RAW_SPINLOCK(leds_lock); static void netwinder_leds_event(led_event_t evt) { unsigned long flags; - spin_lock_irqsave(&leds_lock, flags); + raw_spin_lock_irqsave(&leds_lock, flags); switch (evt) { case led_start: @@ -117,12 +117,12 @@ static void netwinder_leds_event(led_event_t evt) break; } - spin_unlock_irqrestore(&leds_lock, flags); + raw_spin_unlock_irqrestore(&leds_lock, flags); if (led_state & LED_STATE_ENABLED) { - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } } diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index 3285e91ca8c1..f41dba39b327 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -15,7 +15,7 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") /* Maintainer: Jamey Hicks / George France */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, .timer = &footbridge_timer, diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot index 22a52c228d93..683f52b20e3d 100644 --- a/arch/arm/mach-gemini/Makefile.boot +++ b/arch/arm/mach-gemini/Makefile.boot @@ -1,9 +1,9 @@ ifeq ($(CONFIG_GEMINI_MEM_SWAP),y) - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 else - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 endif diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 0cf7a07c3f3f..5927d3c253aa 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -102,7 +102,7 @@ static void __init ib4220b_init(void) } MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &ib4220b_timer, diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index 4fa09af99495..cd7437a1cea0 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -86,7 +86,7 @@ static void __init rut1xx_init(void) } MACHINE_START(RUT100, "Teltonika RUT100") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &rut1xx_timer, diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 88cc422ee444..a367880368f1 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -129,7 +129,7 @@ static void __init wbd111_init(void) } MACHINE_START(WBD111, "Wiliboard WBD-111") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &wbd111_timer, diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 3a220347bc88..f382811c1319 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -129,7 +129,7 @@ static void __init wbd222_init(void) } MACHINE_START(WBD222, "Wiliboard WBD-222") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &wbd222_timer, diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S index f40e006d296e..837670763b85 100644 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =GEMINI_UART_BASE @ physical ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual .endm diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h index 3bc2c70f2989..40a0527bada7 100644 --- a/arch/arm/mach-gemini/include/mach/gpio.h +++ b/arch/arm/mach-gemini/include/mach/gpio.h @@ -13,11 +13,6 @@ #define __MACH_GPIO_H__ #include <mach/irqs.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep #define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE) #define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE) diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h deleted file mode 100644 index a50915f764d8..000000000000 --- a/arch/arm/mach-gemini/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2001-2006 Storlink, Corp. - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#ifdef CONFIG_GEMINI_MEM_SWAP -# define PLAT_PHYS_OFFSET UL(0x00000000) -#else -# define PLAT_PHYS_OFFSET UL(0x10000000) -#endif - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-h720x/Makefile.boot b/arch/arm/mach-h720x/Makefile.boot index 52984017bd91..d875a7094dfe 100644 --- a/arch/arm/mach-h720x/Makefile.boot +++ b/arch/arm/mach-h720x/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-$(CONFIG_ARCH_H720X) := 0x40008000 + zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000 diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 65f1bea958e5..9886f19805f4 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -29,7 +29,7 @@ MACHINE_START(H7201, "Hynix GMS30C7201") /* Maintainer: Robert Schwebel, Pengutronix */ - .boot_params = 0xc0001000, + .atag_offset = 0x1000, .map_io = h720x_map_io, .init_irq = h720x_init_irq, .timer = &h7201_timer, diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 884584a09752..284a134819e1 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -71,7 +71,7 @@ static void __init init_eval_h7202(void) MACHINE_START(H7202, "Hynix HMS30C7202") /* Maintainer: Robert Schwebel, Pengutronix */ - .boot_params = 0x40000100, + .atag_offset = 0x100, .map_io = h720x_map_io, .init_irq = h7202_init_irq, .timer = &h7202_timer, diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index c2093e835720..8a46157b0582 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -16,7 +16,7 @@ .equ io_virt, IO_VIRT .equ io_phys, IO_PHYS - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00020000 @ UART1 add \rv, \rp, #io_virt @ virtual address add \rp, \rp, #io_phys @ physical base address diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h deleted file mode 100644 index 96dcf50c51d3..000000000000 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/memory.h - * - * Copyright (c) 2000 Jungjun Kim - * - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x40000000) -#endif diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index ebee18b3884c..dbe61201bcd8 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,19 +1,19 @@ -zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000 +zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000 params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 -zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 +zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 -zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000 +zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000 params_phys-$(CONFIG_ARCH_MX25) := 0x80000100 initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000 -zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000 +zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000 params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 -zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000 +zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000 params_phys-$(CONFIG_ARCH_MX3) := 0x80000100 initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000 diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cf8f8099ebd7..82bd4403b450 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -17,13 +17,12 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/kernel.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/iomux-mx3.h> /* diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ede2710f8b76..215259083945 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -558,7 +558,7 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 87887ac5806b..b1ec2cf53bb0 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -310,8 +310,8 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index f39a478ba1a6..470b654b0e6e 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -192,9 +192,9 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index da36da52969d..9163318e95a2 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -161,9 +161,9 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX25_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 6778f8193bc6..22306ce28658 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -275,7 +275,7 @@ static struct sys_timer visstrim_m10_timer = { }; MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 272f793e9247..8da48b33fc53 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -71,7 +71,7 @@ static struct sys_timer mx27ipcam_timer = { MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index d81a769fe895..21a14a20e2c3 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -77,7 +77,7 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index e472a1d88058..7c20e9e58006 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -271,7 +271,7 @@ static struct sys_timer kzm_timer = { }; MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 5cd8bee46960..530ea08dbafd 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -145,7 +145,7 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .boot_params = MX1_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, @@ -154,7 +154,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .boot_params = MX1_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d389ecf9b5a8..e56828da26b2 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -305,7 +305,7 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX21_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx21ads_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 7f66a91df361..dd25ee82e70a 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -253,7 +253,7 @@ static struct sys_timer mx25pdk_timer = { MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX25_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6fa6934ab150..2eafbac2c763 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -421,7 +421,7 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index fc26ed71b9ed..635b0509068b 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/iomux-mx27.h> #include "devices-imx27.h" @@ -345,7 +344,7 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index c20be7530927..589066fb3316 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -764,7 +764,7 @@ static void __init mx31_3ds_reserve(void) MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 29ca8907a780..910c4561d35f 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -535,7 +535,7 @@ static struct sys_timer mx31ads_timer = { MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 126913ad106a..e92eaf91a7be 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -295,7 +295,7 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 4b47fd9fdd89..5242cb78b563 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -280,7 +280,7 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index b358383120e7..1d01ef28f25d 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -567,7 +567,7 @@ static void __init mx31moboard_reserve(void) MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index b3b9bd8ac2a3..f2a873dc08ce 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -217,7 +217,7 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index c85876fed663..5ec3989704fd 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -267,7 +267,7 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 71083aa16038..0f6bd1199038 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -435,7 +435,7 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index f45b7cd72c8a..186d4eb90796 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -688,7 +688,7 @@ static void __init pcm037_reserve(void) MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .reserve = pcm037_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 2d6a64bbac44..091bcf87e1a0 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -349,7 +349,7 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 660ec3e80cf8..0a4d31de7738 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -418,7 +418,7 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 3626f486498a..9e11359c324c 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -262,7 +262,7 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index db2d60470e15..85d32845ee1e 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -137,7 +137,7 @@ static struct sys_timer scb9328_timer = { MACHINE_START(SCB9328, "Synertronixx scb9328") /* Sascha Hauer */ - .boot_params = 0x08000100, + .atag_offset = 100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot index c7e75acfe6c9..ff0a4b5b0a82 100644 --- a/arch/arm/mach-integrator/Makefile.boot +++ b/arch/arm/mach-integrator/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 77315b995681..4b38e13667ac 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -126,6 +126,10 @@ static struct clk_lookup lookups[] = { { /* Bus clock */ .con_id = "apb_pclk", .clk = &dummy_apb_pclk, + }, { + /* Integrator/AP timer frequency */ + .dev_id = "ap_timer", + .clk = &clk24mhz, }, { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, @@ -205,7 +209,7 @@ static struct amba_pl010_data integrator_uart_data = { #define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) -static DEFINE_SPINLOCK(cm_lock); +static DEFINE_RAW_SPINLOCK(cm_lock); /** * cm_control - update the CM_CTRL register. @@ -217,10 +221,10 @@ void cm_control(u32 mask, u32 set) unsigned long flags; u32 val; - spin_lock_irqsave(&cm_lock, flags); + raw_spin_lock_irqsave(&cm_lock, flags); val = readl(CM_CTRL) & ~mask; writel(val | set, CM_CTRL); - spin_unlock_irqrestore(&cm_lock, flags); + raw_spin_unlock_irqrestore(&cm_lock, flags); } EXPORT_SYMBOL(cm_control); diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index a1f598fd3a56..411b116077e4 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x16000000 @ physical base address mov \rv, #0xf0000000 @ virtual base add \rv, \rv, #0x16000000 >> 4 diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h index f21bb5493dd9..37beed3fa3ed 100644 --- a/arch/arm/mach-integrator/include/mach/io.h +++ b/arch/arm/mach-integrator/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - /* * WARNING: this has to mirror definitions in platform.h */ diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 5e6ea5cfea6e..ec467baade09 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -13,9 +13,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ /************************************************************************** * * Copyright © ARM Limited 1998. All rights reserved. * ***********************************************************************/ @@ -399,15 +396,6 @@ #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) -#define TICKS_PER_uSEC 24 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_10 (mSEC_1 * 10) - #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2fbbdd5eac35..a1769f35a86e 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <linux/clk.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +156,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff @@ -320,35 +323,24 @@ static void __init ap_init(void) #define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE) #define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE) -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - static unsigned long timer_reload; -static void integrator_clocksource_init(u32 khz) +static void integrator_clocksource_init(unsigned long inrate) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; + unsigned long rate = inrate; - if (khz >= 1500) { - khz /= 16; - ctrl = TIMER_CTRL_DIV16; + if (rate >= 1500000) { + rate /= 16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", - khz * 1000, 200, 16, clocksource_mmio_readl_down); + rate, 200, 16, clocksource_mmio_readl_down); } static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; @@ -372,15 +364,29 @@ static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_devic { u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; - BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT); + /* Disable timer */ + writel(ctrl, clkevt_base + TIMER_CTRL); - if (mode == CLOCK_EVT_MODE_PERIODIC) { - writel(ctrl, clkevt_base + TIMER_CTRL); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* Enable the timer and start the periodic tick */ writel(timer_reload, clkevt_base + TIMER_LOAD); ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + writel(ctrl, clkevt_base + TIMER_CTRL); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Leave the timer disabled, .set_next_event will enable it */ + ctrl &= ~TIMER_CTRL_PERIODIC; + writel(ctrl, clkevt_base + TIMER_CTRL); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + default: + /* Just leave in disabled state */ + break; } - writel(ctrl, clkevt_base + TIMER_CTRL); } static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) @@ -396,12 +402,10 @@ static int clkevt_set_next_event(unsigned long next, struct clock_event_device * static struct clock_event_device integrator_clockevent = { .name = "timer1", - .shift = 34, - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = clkevt_set_mode, .set_next_event = clkevt_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction integrator_timer_irq = { @@ -411,29 +415,27 @@ static struct irqaction integrator_timer_irq = { .dev_id = &integrator_clockevent, }; -static void integrator_clockevent_init(u32 khz) +static void integrator_clockevent_init(unsigned long inrate) { - struct clock_event_device *evt = &integrator_clockevent; + unsigned long rate = inrate; unsigned int ctrl = 0; - if (khz * 1000 > 0x100000 * HZ) { - khz /= 256; + /* Calculate and program a divisor */ + if (rate > 0x100000 * HZ) { + rate /= 256; ctrl |= TIMER_CTRL_DIV256; - } else if (khz * 1000 > 0x10000 * HZ) { - khz /= 16; + } else if (rate > 0x10000 * HZ) { + rate /= 16; ctrl |= TIMER_CTRL_DIV16; } - - timer_reload = khz * 1000 / HZ; + timer_reload = rate / HZ; writel(ctrl, clkevt_base + TIMER_CTRL); - evt->irq = IRQ_TIMERINT1; - evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift); - evt->max_delta_ns = clockevent_delta2ns(0xffff, evt); - evt->min_delta_ns = clockevent_delta2ns(0xf, evt); - setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); - clockevents_register_device(evt); + clockevents_config_and_register(&integrator_clockevent, + rate, + 1, + 0xffffU); } /* @@ -441,14 +443,20 @@ static void integrator_clockevent_init(u32 khz) */ static void __init ap_init_timer(void) { - u32 khz = TICKS_PER_uSEC * 1000; + struct clk *clk; + unsigned long rate; + + clk = clk_get_sys("ap_timer", NULL); + BUG_ON(IS_ERR(clk)); + clk_enable(clk); + rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); writel(0, TIMER1_VA_BASE + TIMER_CTRL); writel(0, TIMER2_VA_BASE + TIMER_CTRL); - integrator_clocksource_init(khz); - integrator_clockevent_init(khz); + integrator_clocksource_init(rate); + integrator_clockevent_init(rate); } static struct sys_timer ap_timer = { @@ -457,7 +465,7 @@ static struct sys_timer ap_timer = { MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = ap_map_io, .init_early = integrator_init_early, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4eb03ab5cb46..5de49c33e4d4 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -492,7 +492,7 @@ static struct sys_timer cp_timer = { MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = intcp_map_io, .init_early = intcp_init_early, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb351e3..b4d8f8b8a085 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -164,7 +163,7 @@ * 7:2 register number * */ -static DEFINE_SPINLOCK(v3_lock); +static DEFINE_RAW_SPINLOCK(v3_lock); #define PCI_BUS_NONMEM_START 0x00000000 #define PCI_BUS_NONMEM_SIZE SZ_256M @@ -285,7 +284,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, unsigned long flags; u32 v; - spin_lock_irqsave(&v3_lock, flags); + raw_spin_lock_irqsave(&v3_lock, flags); addr = v3_open_config_window(bus, devfn, where); switch (size) { @@ -303,7 +302,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, } v3_close_config_window(); - spin_unlock_irqrestore(&v3_lock, flags); + raw_spin_unlock_irqrestore(&v3_lock, flags); *val = v; return PCIBIOS_SUCCESSFUL; @@ -315,7 +314,7 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, unsigned long addr; unsigned long flags; - spin_lock_irqsave(&v3_lock, flags); + raw_spin_lock_irqsave(&v3_lock, flags); addr = v3_open_config_window(bus, devfn, where); switch (size) { @@ -336,7 +335,7 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, } v3_close_config_window(); - spin_unlock_irqrestore(&v3_lock, flags); + raw_spin_unlock_irqrestore(&v3_lock, flags); return PCIBIOS_SUCCESSFUL; } @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors @@ -515,7 +513,7 @@ void __init pci_v3_preinit(void) hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); - spin_lock_irqsave(&v3_lock, flags); + raw_spin_lock_irqsave(&v3_lock, flags); /* * Unlock V3 registers, but only if they were previously locked. @@ -588,7 +586,7 @@ void __init pci_v3_preinit(void) printk(KERN_ERR "PCI: unable to grab PCI error " "interrupt: %d\n", ret); - spin_unlock_irqrestore(&v3_lock, flags); + raw_spin_unlock_irqrestore(&v3_lock, flags); } void __init pci_v3_postinit(void) diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot index 0b0e19fdfe6c..3a8c38c3189c 100644 --- a/arch/arm/mach-iop13xx/Makefile.boot +++ b/arch/arm/mach-iop13xx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S index e664466d51bf..d869a6f67e5c 100644 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00002300 orr \rp, \rp, #0x00000040 orr \rv, \rp, #0xfe000000 @ virtual diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 23dfaffc586c..4cf2cc477eae 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -91,7 +91,7 @@ static struct sys_timer iq81340mc_timer = { MACHINE_START(IQ81340MC, "Intel IQ81340MC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340mc_timer, diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index df3492a9c280..cd9e27499a1e 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -93,7 +93,7 @@ static struct sys_timer iq81340sc_timer = { MACHINE_START(IQ81340SC, "Intel IQ81340SC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340sc_timer, diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot index 47000dccd61f..0a833b11e38c 100644 --- a/arch/arm/mach-iop32x/Makefile.boot +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0xa0008000 + zreladdr-y += 0xa0008000 params_phys-y := 0xa0000100 initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 6cbffbfc2bba..4325055d4e19 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -203,7 +203,7 @@ static void __init em7210_init_machine(void) } MACHINE_START(EM7210, "Lanner EM7210") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = em7210_map_io, .init_irq = iop32x_init_irq, .timer = &em7210_timer, diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index ceef5d4dce1a..0edc88020577 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -207,7 +207,7 @@ static void __init glantank_init_machine(void) MACHINE_START(GLANTANK, "GLAN Tank") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = glantank_map_io, .init_irq = iop32x_init_irq, .timer = &glantank_timer, diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S index ff9e76c09f35..363bdf90b34d 100644 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xfe000000 @ physical as well as virtual orr \rp, \rp, #0x00800000 @ location of the UART mov \rv, \rp diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h deleted file mode 100644 index 169cc239f76c..000000000000 --- a/arch/arm/mach-iop32x/include/mach/memory.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xa0000000) - -#endif diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 3a62514dae7c..9e7aaccfeba0 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -313,7 +313,7 @@ __setup("force_ep80219", force_ep80219_setup); MACHINE_START(IQ31244, "Intel IQ31244") /* Maintainer: Intel Corp. */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, .timer = &iq31244_timer, @@ -327,7 +327,7 @@ MACHINE_END */ MACHINE_START(EP80219, "Intel EP80219") /* Maintainer: Intel Corp. */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, .timer = &iq31244_timer, diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 35b7e6914d3b..53ea86f649dd 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -186,7 +186,7 @@ static void __init iq80321_init_machine(void) MACHINE_START(IQ80321, "Intel IQ80321") /* Maintainer: Intel Corp. */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = iq80321_map_io, .init_irq = iop32x_init_irq, .timer = &iq80321_timer, diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 1a374eab6007..d7269279968c 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -327,7 +327,7 @@ static void __init n2100_init_machine(void) MACHINE_START(N2100, "Thecus N2100") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = n2100_map_io, .init_irq = iop32x_init_irq, .timer = &n2100_timer, diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot index 67039c3e0c48..760a0efe7580 100644 --- a/arch/arm/mach-iop33x/Makefile.boot +++ b/arch/arm/mach-iop33x/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S index 40c500dd1fac..361be1f6026e 100644 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00ff0000 orr \rp, \rp, #0x0000f700 orr \rv, #0xfe000000 @ virtual diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h deleted file mode 100644 index 8e1daf7006b6..000000000000 --- a/arch/arm/mach-iop33x/include/mach/memory.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 637c0272d5e0..9e14ccc56f8e 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -141,7 +141,7 @@ static void __init iq80331_init_machine(void) MACHINE_START(IQ80331, "Intel IQ80331") /* Maintainer: Intel Corp. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, .timer = &iq80331_timer, diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 90a0436d7255..09c899a2523f 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -141,7 +141,7 @@ static void __init iq80332_init_machine(void) MACHINE_START(IQ80332, "Intel IQ80332") /* Maintainer: Intel Corp. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, .timer = &iq80332_timer, diff --git a/arch/arm/mach-ixp2000/Makefile.boot b/arch/arm/mach-ixp2000/Makefile.boot index d84c5807a43d..9c7af91d93da 100644 --- a/arch/arm/mach-ixp2000/Makefile.boot +++ b/arch/arm/mach-ixp2000/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4068166c8993..59a512672bb9 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -13,7 +13,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -39,7 +39,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <mach/gpio-ixp2000.h> static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 62c60ade5274..af9994537e01 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -254,7 +254,7 @@ static void __init enp2611_init_machine(void) MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = enp2611_map_io, .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S index 0ef533b20972..bdd3ccdc2890 100644 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00030000 #ifdef __ARMEB__ orr \rp, \rp, #0x00000003 diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h index 4a88d2c33dac..af836c76c3f1 100644 --- a/arch/arm/mach-ixp2000/include/mach/gpio.h +++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h @@ -3,7 +3,7 @@ * * Copyright (C) 2002 Intel Corporation. * - * This program is free software, you can redistribute it and/or modify + * This program is free software, you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ @@ -11,7 +11,7 @@ /* * IXP2000 GPIO in/out, edge/level detection for IRQs: * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. + * or both Falling-edge and Rising-edge. * This must be called *before* the corresponding IRQ is registerd. * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 5bad1a8419b7..f7dfd9700141 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -171,7 +171,7 @@ void __init ixdp2400_init_irq(void) MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x00_map_io, .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 3d3cef876467..d33bcac1ec92 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -286,7 +286,7 @@ void __init ixdp2800_init_irq(void) MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x00_map_io, .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 235638f800e5..634b6c852f68 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -14,6 +14,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mm.h> @@ -40,8 +41,7 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> -#include <mach/gpio.h> - +#include <mach/gpio-ixp2000.h> /************************************************************************* * IXDP2x00 IRQ Initialization diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index be2a254f1374..61a28676b5be 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -417,7 +417,7 @@ static void __init ixdp2x01_init_machine(void) #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, @@ -428,7 +428,7 @@ MACHINE_END #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, @@ -441,7 +441,7 @@ MACHINE_END */ MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot index d5561ad15bad..44fb4a717c3f 100644 --- a/arch/arm/mach-ixp23xx/Makefile.boot +++ b/arch/arm/mach-ixp23xx/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index e25e5fe183ba..30dd31652e9d 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -88,6 +88,6 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") .map_io = ixp23xx_map_io, .init_irq = ixp23xx_init_irq, .timer = &ixp23xx_timer, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = espresso_init, MACHINE_END diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S index f7c6eef7fa22..5ff524c13744 100644 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S @@ -12,7 +12,7 @@ */ #include <mach/ixp23xx.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual #ifdef __ARMEB__ diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index ec028e35f401..b3a57e0f3419 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -331,6 +331,6 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") .map_io = ixdp2351_map_io, .init_irq = ixdp2351_init_irq, .timer = &ixp23xx_timer, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = ixdp2351_init, MACHINE_END diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 844551d2368b..8f4dcbba9025 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -175,6 +175,6 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") .map_io = ixp23xx_map_io, .init_irq = ixp23xx_init_irq, .timer = &ixp23xx_timer, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = roadrunner_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot index d84c5807a43d..9c7af91d93da 100644 --- a/arch/arm/mach-ixp4xx/Makefile.boot +++ b/arch/arm/mach-ixp4xx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index ee19c1d383aa..37609a22c450 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -167,7 +167,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = avila_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -185,7 +185,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = avila_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 2131832ee6ba..f72a3a893c47 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -54,7 +54,7 @@ unsigned long ixp4xx_pci_reg_base = 0; * these transactions are atomic or we will end up * with corrupt data on the bus or in a driver. */ -static DEFINE_SPINLOCK(ixp4xx_pci_lock); +static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock); /* * Read from PCI config space @@ -62,10 +62,10 @@ static DEFINE_SPINLOCK(ixp4xx_pci_lock); static void crp_read(u32 ad_cbe, u32 *data) { unsigned long flags; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_CRP_AD_CBE = ad_cbe; *data = *PCI_CRP_RDATA; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); } /* @@ -74,10 +74,10 @@ static void crp_read(u32 ad_cbe, u32 *data) static void crp_write(u32 ad_cbe, u32 data) { unsigned long flags; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe; *PCI_CRP_WDATA = data; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); } static inline int check_master_abort(void) @@ -101,7 +101,7 @@ int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) int retval = 0; int i; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -118,7 +118,7 @@ int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -127,7 +127,7 @@ int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) unsigned long flags; int retval = 0; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -140,7 +140,7 @@ int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -149,7 +149,7 @@ int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) unsigned long flags; int retval = 0; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -162,7 +162,7 @@ int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -397,7 +397,8 @@ void __init ixp4xx_pci_preinit(void) local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET); local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M); local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M); - local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M); + local_write_config(PCI_BASE_ADDRESS_3, 4, + PHYS_OFFSET + SZ_32M + SZ_16M); /* * Enable CSR window at 64 MiB to allow PCI masters diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index e24564b5d935..81dfec31842b 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -112,7 +112,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = coyote_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -130,7 +130,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = coyote_init, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 03e54515e8b3..8837fbca27ce 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -16,7 +16,7 @@ * Author: Rod Whitby <rod@whitby.id.au> * Maintainers: http://www.nslu2-linux.org/ */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/jiffies.h> #include <linux/timer.h> @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> #define DSMG600_SDA_PIN 5 #define DSMG600_SCL_PIN 4 @@ -279,7 +278,7 @@ static void __init dsmg600_init(void) MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &dsmg600_timer, diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 23a8b3614568..2887c3578c17 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -14,7 +14,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -27,7 +27,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/gpio.h> #define FSG_SDA_PIN 12 #define FSG_SCL_PIN 13 @@ -273,7 +272,7 @@ MACHINE_START(FSG, "Freecom FSG-3") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = fsg_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index d4f851bdd9a4..d69d1b053bb7 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -99,7 +99,7 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = gateway7001_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 7548d9a2efe2..bf6678d1a929 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -499,7 +499,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = gmlr_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 3790dffd3c30..aa029fc19140 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -167,7 +167,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = gtwx5715_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index b974a49c0aff..8c9f8d564492 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp #ifdef __ARMEB__ mov \rp, #3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h index a5f87ded2f28..83d6b4ed60bb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/gpio.h +++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h @@ -28,6 +28,8 @@ #include <linux/kernel.h> #include <mach/hardware.h> +#define __ARM_GPIOLIB_COMPLEX + static inline int gpio_request(unsigned gpio, const char *label) { return 0; @@ -70,6 +72,7 @@ static inline void gpio_set_value(unsigned gpio, int value) #include <asm-generic/gpio.h> /* cansleep wrappers */ extern int gpio_to_irq(int gpio); +#define gpio_to_irq gpio_to_irq extern int irq_to_gpio(unsigned int irq); #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 57b5410c31f4..ffb9d6afb89f 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,8 +17,6 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0x0000ffff - extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h deleted file mode 100644 index 4caf1761f1e2..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/memory.h - * - * Copyright (c) 2001-2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <asm/sizes.h> - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 6a2927956bf6..f235f829dfa6 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -256,7 +256,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -270,7 +270,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -284,7 +284,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -298,7 +298,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index afb51879d9a4..de716fa1aab6 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -17,7 +17,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/jiffies.h> @@ -32,7 +32,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/gpio.h> #define NAS100D_SDA_PIN 5 #define NAS100D_SCL_PIN 6 @@ -314,7 +313,7 @@ static void __init nas100d_init(void) MACHINE_START(NAS100D, "Iomega NAS 100d") /* Maintainer: www.nslu2-linux.org */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 69e40f2cf092..ac81ccb26bfe 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -16,7 +16,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -30,7 +30,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> #define NSLU2_SDA_PIN 7 #define NSLU2_SCL_PIN 6 @@ -300,7 +299,7 @@ static void __init nslu2_init(void) MACHINE_START(NSLU2, "Linksys NSLU2") /* Maintainer: www.nslu2-linux.org */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &nslu2_timer, diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 045336c833af..27e469ef4523 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -239,7 +239,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = vulcan_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 40b9fad800b8..b14144b967a7 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -100,7 +100,7 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = wg302v2_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 67039c3e0c48..760a0efe7580 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index 043cfd5e140b..f457e07a65f0 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -221,7 +221,7 @@ static void __init d2net_v2_init(void) } MACHINE_START(D2NET_V2, "LaCie d2 Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index bff04e04d679..ff4c21c1f923 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -97,7 +97,7 @@ subsys_initcall(db88f6281_pci_init); MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db88f6281_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index f14dfb8508c5..e4d199b2b1e8 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -102,7 +102,7 @@ static void __init dockstar_init(void) } MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dockstar_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 41d1b40696a3..6c40f784b516 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -121,7 +121,7 @@ static void __init guruplug_init(void) MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") /* Maintainer: Siddarth Gore <gores@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = guruplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index db06ae437d08..f785d401a607 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KIRKWOOD_REGS_PHYS_BASE ldr \rv, =KIRKWOOD_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h deleted file mode 100644 index 4600b44e3ad3..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 05d193a25b25..c4c68e5b94f1 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,14 +7,13 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include <asm/gpio.h> #include "common.h" static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index b0a7d979a8ed..cc431fa22ccb 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <plat/mpp.h> #include "common.h" diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 00cca22eca6f..9a1e917352f7 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -163,7 +163,7 @@ subsys_initcall(mv88f6281gtw_ge_pci_init); MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mv88f6281gtw_ge_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 7cdab5776452..8849bcc7328e 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -258,7 +258,7 @@ static void __init netspace_v2_init(void) #ifdef CONFIG_MACH_NETSPACE_V2 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -269,7 +269,7 @@ MACHINE_END #ifdef CONFIG_MACH_INETSPACE_V2 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -280,7 +280,7 @@ MACHINE_END #ifdef CONFIG_MACH_NETSPACE_MAX_V2 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 6be627deb0fc..1ba12c4dff8f 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -399,7 +399,7 @@ static void __init netxbig_v2_init(void) #ifdef CONFIG_MACH_NET2BIG_V2 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -410,7 +410,7 @@ MACHINE_END #ifdef CONFIG_MACH_NET5BIG_V2 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index f69beeff4450..5660ca6c3d88 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -214,7 +214,7 @@ subsys_initcall(openrd_pci_init); #ifdef CONFIG_MACH_OPENRD_BASE MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -226,7 +226,7 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_CLIENT MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -238,7 +238,7 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_ULTIMATE MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 75c6601b8d87..6663869773ab 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -79,7 +79,7 @@ subsys_initcall(rd88f6192_pci_init); MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6192_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 0f75494d5902..66b3c05e37a6 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -115,7 +115,7 @@ subsys_initcall(rd88f6281_pci_init); MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6281_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 17de0bf53c08..8b102d62e82c 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -138,7 +138,7 @@ static void __init sheevaplug_init(void) #ifdef CONFIG_MACH_SHEEVAPLUG MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -149,7 +149,7 @@ MACHINE_END #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index e6b9b1b22a35..ea104fb5ec3d 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -201,7 +201,7 @@ subsys_initcall(hp_t5325_pci_init); MACHINE_START(T5325, "HP t5325 Thin Client") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = hp_t5325_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 68f32f2bf552..262c034836d4 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -132,7 +132,7 @@ subsys_initcall(ts219_pci_init); MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index d5d009970705..b68f5b4a9ec8 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -176,7 +176,7 @@ subsys_initcall(ts41x_pci_init); MACHINE_START(TS41X, "QNAP TS-41x") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 7e3e8160ed30..853efd9133c6 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -3,7 +3,7 @@ # Makefile for KS8695 architecture support # -obj-y := cpu.o irq.o time.o gpio.o devices.o +obj-y := cpu.o irq.o time.o devices.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot index 48eb2cb3ac77..c9b0bebcf237 100644 --- a/arch/arm/mach-ks8695/Makefile.boot +++ b/arch/arm/mach-ks8695/Makefile.boot @@ -3,6 +3,6 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 3ca4f8e6f54f..a91f99d265aa 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -34,7 +34,7 @@ #include <asm/mach/irq.h> #include <mach/devices.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include "generic.h" @@ -223,7 +223,7 @@ static void __init acs5k_init(void) MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") /* Maintainer: Simtec Electronics. */ - .boot_params = KS8695_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = acs5k_init, diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index 1338cb3e9827..d24bcef2e2dd 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -29,7 +29,7 @@ #include <asm/mach/irq.h> #include <mach/devices.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include "generic.h" @@ -121,7 +121,7 @@ static void __init dsm320_init(void) MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player") /* Maintainer: Simtec Electronics. */ - .boot_params = KS8695_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = dsm320_init, diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index e2e3cba8dcdb..16c95657f8fd 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -5,7 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -18,7 +18,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include <mach/devices.h> #include "generic.h" @@ -53,7 +53,7 @@ static void __init micrel_init(void) MACHINE_START(KS8695, "KS8695 Centaur Development Board") /* Maintainer: Micrel Semiconductor Inc. */ - .boot_params = KS8695_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = micrel_init, diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c index b89fb6d46ccc..73bd63812878 100644 --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c @@ -20,6 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c deleted file mode 100644 index 31e456508a6f..000000000000 --- a/arch/arm/mach-ks8695/gpio.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * arch/arm/mach-ks8695/gpio.c - * - * Copyright (C) 2006 Andrew Victor - * Updated to GPIOLIB, Copyright 2008 Simtec Electronics - * Daniel Silverstone <dsilvers@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/mach/irq.h> - -#include <mach/regs-gpio.h> -#include <mach/gpio.h> - -/* - * Configure a GPIO line for either GPIO function, or its internal - * function (Interrupt, Timer, etc). - */ -static void ks8695_gpio_mode(unsigned int pin, short gpio) -{ - unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; - unsigned long x, flags; - - if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */ - return; - - local_irq_save(flags); - - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); - if (gpio) /* GPIO: set bit to 0 */ - x &= ~enable[pin]; - else /* Internal function: set bit to 1 */ - x |= enable[pin]; - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC); - - local_irq_restore(flags); -} - - -static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 }; - -/* - * Configure GPIO pin as external interrupt source. - */ -int ks8695_gpio_interrupt(unsigned int pin, unsigned int type) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ - return -EINVAL; - - local_irq_save(flags); - - /* set pin as input */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - x &= ~IOPM(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); - - local_irq_restore(flags); - - /* Set IRQ triggering type */ - irq_set_irq_type(gpio_irq[pin], type); - - /* enable interrupt mode */ - ks8695_gpio_mode(pin, 0); - - return 0; -} -EXPORT_SYMBOL(ks8695_gpio_interrupt); - - - -/* .... Generic GPIO interface .............................................. */ - -/* - * Configure the GPIO line as an input. - */ -static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_15) - return -EINVAL; - - /* set pin to GPIO mode */ - ks8695_gpio_mode(pin, 1); - - local_irq_save(flags); - - /* set pin as input */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - x &= ~IOPM(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); - - local_irq_restore(flags); - - return 0; -} - - -/* - * Configure the GPIO line as an output, with default state. - */ -static int ks8695_gpio_direction_output(struct gpio_chip *gc, - unsigned int pin, int state) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_15) - return -EINVAL; - - /* set pin to GPIO mode */ - ks8695_gpio_mode(pin, 1); - - local_irq_save(flags); - - /* set line state */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - if (state) - x |= IOPD(pin); - else - x &= ~IOPD(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); - - /* set pin as output */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - x |= IOPM(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); - - local_irq_restore(flags); - - return 0; -} - - -/* - * Set the state of an output GPIO line. - */ -static void ks8695_gpio_set_value(struct gpio_chip *gc, - unsigned int pin, int state) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_15) - return; - - local_irq_save(flags); - - /* set output line state */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - if (state) - x |= IOPD(pin); - else - x &= ~IOPD(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); - - local_irq_restore(flags); -} - - -/* - * Read the state of a GPIO line. - */ -static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin) -{ - unsigned long x; - - if (pin > KS8695_GPIO_15) - return -EINVAL; - - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - return (x & IOPD(pin)) != 0; -} - - -/* - * Map GPIO line to IRQ number. - */ -static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin) -{ - if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ - return -EINVAL; - - return gpio_irq[pin]; -} - -/* - * Map IRQ number to GPIO line. - */ -int irq_to_gpio(unsigned int irq) -{ - if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3)) - return -EINVAL; - - return (irq - KS8695_IRQ_EXTERN0); -} -EXPORT_SYMBOL(irq_to_gpio); - -/* GPIOLIB interface */ - -static struct gpio_chip ks8695_gpio_chip = { - .label = "KS8695", - .direction_input = ks8695_gpio_direction_input, - .direction_output = ks8695_gpio_direction_output, - .get = ks8695_gpio_get_value, - .set = ks8695_gpio_set_value, - .to_irq = ks8695_gpio_to_irq, - .base = 0, - .ngpio = 16, - .can_sleep = 0, -}; - -/* Register the GPIOs */ -void ks8695_register_gpios(void) -{ - if (gpiochip_add(&ks8695_gpio_chip)) - printk(KERN_ERR "Unable to register core GPIOs\n"); -} - -/* .... Debug interface ..................................................... */ - -#ifdef CONFIG_DEBUG_FS - -static int ks8695_gpio_show(struct seq_file *s, void *unused) -{ - unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; - unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM }; - unsigned long mode, ctrl, data; - int i; - - mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); - data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - - seq_printf(s, "Pin\tI/O\tFunction\tState\n\n"); - - for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) { - seq_printf(s, "%i:\t", i); - - seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input"); - - if (i <= KS8695_GPIO_3) { - if (ctrl & enable[i]) { - seq_printf(s, "EXT%i ", i); - - switch ((ctrl & intmask[i]) >> (4 * i)) { - case IOPC_TM_LOW: - seq_printf(s, "(Low)"); break; - case IOPC_TM_HIGH: - seq_printf(s, "(High)"); break; - case IOPC_TM_RISING: - seq_printf(s, "(Rising)"); break; - case IOPC_TM_FALLING: - seq_printf(s, "(Falling)"); break; - case IOPC_TM_EDGE: - seq_printf(s, "(Edges)"); break; - } - } - else - seq_printf(s, "GPIO\t"); - } - else if (i <= KS8695_GPIO_5) { - if (ctrl & enable[i]) - seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4); - else - seq_printf(s, "GPIO\t"); - } - else - seq_printf(s, "GPIO\t"); - - seq_printf(s, "\t"); - - seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0); - } - return 0; -} - -static int ks8695_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, ks8695_gpio_show, NULL); -} - -static const struct file_operations ks8695_gpio_operations = { - .open = ks8695_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init ks8695_gpio_debugfs_init(void) -{ - /* /sys/kernel/debug/ks8695_gpio */ - (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations); - return 0; -} -postcore_initcall(ks8695_gpio_debugfs_init); - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S index bf516adf1925..a79e48981202 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/regs-uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KS8695_UART_PA @ physical base address ldr \rv, =KS8695_UART_VA @ virtual base address .endm diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h new file mode 100644 index 000000000000..6eb034d60325 --- /dev/null +++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2006 Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_KS8659_GPIO_H +#define __MACH_KS8659_GPIO_H + +#include <linux/kernel.h> + +#define KS8695_GPIO_0 0 +#define KS8695_GPIO_1 1 +#define KS8695_GPIO_2 2 +#define KS8695_GPIO_3 3 +#define KS8695_GPIO_4 4 +#define KS8695_GPIO_5 5 +#define KS8695_GPIO_6 6 +#define KS8695_GPIO_7 7 +#define KS8695_GPIO_8 8 +#define KS8695_GPIO_9 9 +#define KS8695_GPIO_10 10 +#define KS8695_GPIO_11 11 +#define KS8695_GPIO_12 12 +#define KS8695_GPIO_13 13 +#define KS8695_GPIO_14 14 +#define KS8695_GPIO_15 15 + +/* + * Configure GPIO pin as external interrupt source. + */ +extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); + +/* Register the GPIOs */ +extern void ks8695_register_gpios(void); + +#endif /* __MACH_KS8659_GPIO_H */ diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h index 86312d476bc6..f5fda36e4512 100644 --- a/arch/arm/mach-ks8695/include/mach/gpio.h +++ b/arch/arm/mach-ks8695/include/mach/gpio.h @@ -11,47 +11,9 @@ #ifndef __ASM_ARCH_GPIO_H_ #define __ASM_ARCH_GPIO_H_ -#include <linux/kernel.h> - -#define KS8695_GPIO_0 0 -#define KS8695_GPIO_1 1 -#define KS8695_GPIO_2 2 -#define KS8695_GPIO_3 3 -#define KS8695_GPIO_4 4 -#define KS8695_GPIO_5 5 -#define KS8695_GPIO_6 6 -#define KS8695_GPIO_7 7 -#define KS8695_GPIO_8 8 -#define KS8695_GPIO_9 9 -#define KS8695_GPIO_10 10 -#define KS8695_GPIO_11 11 -#define KS8695_GPIO_12 12 -#define KS8695_GPIO_13 13 -#define KS8695_GPIO_14 14 -#define KS8695_GPIO_15 15 - -/* - * Configure GPIO pin as external interrupt source. - */ -extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); - /* * Map IRQ number to GPIO line. */ extern int irq_to_gpio(unsigned int irq); -#include <asm-generic/gpio.h> - -/* If it turns out that we need to optimise GPIO access for the - * Micrel's GPIOs, then these can be changed to check their argument - * directly as static inlines. However for now it's probably not - * worthwhile. - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_to_irq __gpio_to_irq - -/* Register the GPIOs */ -extern void ks8695_register_gpios(void); - #endif diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index 184ef74e4bee..d6f6502ac9b5 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -7,14 +7,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/gpio.h> #include <asm/leds.h> #include <mach/devices.h> -#include <mach/gpio.h> static inline void ks8695_led_on(unsigned int led) diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S index b0a2db77d392..0b4e760159b9 100644 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ b/arch/arm/mach-l7200/include/mach/debug-macro.S @@ -14,7 +14,7 @@ .equ io_virt, IO_BASE .equ io_phys, IO_START - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00044000 @ UART1 @ mov \rp, #0x00045000 @ UART2 add \rv, \rp, #io_virt @ virtual address diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index a5fc5d0eeaeb..f5db805ab958 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -3,6 +3,6 @@ # obj-y := timer.o irq.o common.o serial.o clock.o -obj-y += gpiolib.o pm.o suspend.o +obj-y += pm.o suspend.o obj-y += phy3250.o diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot index b796b41ebf8f..2cfe0ee635c5 100644 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x82000000 diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c deleted file mode 100644 index 69061ea8997a..000000000000 --- a/arch/arm/mach-lpc32xx/gpiolib.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/gpiolib.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "common.h" - -#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000) -#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004) -#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008) -#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C) -#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010) -#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014) -#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018) -#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C) -#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020) -#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024) -#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) -#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) -#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) -#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040) -#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044) -#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048) -#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C) -#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050) -#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054) -#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058) -#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060) -#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064) -#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068) -#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C) -#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070) -#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074) -#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078) - -#define GPIO012_PIN_TO_BIT(x) (1 << (x)) -#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25)) -#define GPO3_PIN_TO_BIT(x) (1 << (x)) -#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) -#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x)) -#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y)) -#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1) -#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) - -struct gpio_regs { - void __iomem *inp_state; - void __iomem *outp_set; - void __iomem *outp_clr; - void __iomem *dir_set; - void __iomem *dir_clr; -}; - -/* - * GPIO names - */ -static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = { - "p0.0", "p0.1", "p0.2", "p0.3", - "p0.4", "p0.5", "p0.6", "p0.7" -}; - -static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = { - "p1.0", "p1.1", "p1.2", "p1.3", - "p1.4", "p1.5", "p1.6", "p1.7", - "p1.8", "p1.9", "p1.10", "p1.11", - "p1.12", "p1.13", "p1.14", "p1.15", - "p1.16", "p1.17", "p1.18", "p1.19", - "p1.20", "p1.21", "p1.22", "p1.23", -}; - -static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { - "p2.0", "p2.1", "p2.2", "p2.3", - "p2.4", "p2.5", "p2.6", "p2.7", - "p2.8", "p2.9", "p2.10", "p2.11", - "p2.12" -}; - -static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { - "gpi000", "gpio01", "gpio02", "gpio03", - "gpio04", "gpio05" -}; - -static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = { - "gpi00", "gpi01", "gpi02", "gpi03", - "gpi04", "gpi05", "gpi06", "gpi07", - "gpi08", "gpi09", NULL, NULL, - NULL, NULL, NULL, "gpi15", - "gpi16", "gpi17", "gpi18", "gpi19", - "gpi20", "gpi21", "gpi22", "gpi23", - "gpi24", "gpi25", "gpi26", "gpi27" -}; - -static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = { - "gpo00", "gpo01", "gpo02", "gpo03", - "gpo04", "gpo05", "gpo06", "gpo07", - "gpo08", "gpo09", "gpo10", "gpo11", - "gpo12", "gpo13", "gpo14", "gpo15", - "gpo16", "gpo17", "gpo18", "gpo19", - "gpo20", "gpo21", "gpo22", "gpo23" -}; - -static struct gpio_regs gpio_grp_regs_p0 = { - .inp_state = LPC32XX_GPIO_P0_INP_STATE, - .outp_set = LPC32XX_GPIO_P0_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P0_DIR_SET, - .dir_clr = LPC32XX_GPIO_P0_DIR_CLR, -}; - -static struct gpio_regs gpio_grp_regs_p1 = { - .inp_state = LPC32XX_GPIO_P1_INP_STATE, - .outp_set = LPC32XX_GPIO_P1_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P1_DIR_SET, - .dir_clr = LPC32XX_GPIO_P1_DIR_CLR, -}; - -static struct gpio_regs gpio_grp_regs_p2 = { - .inp_state = LPC32XX_GPIO_P2_INP_STATE, - .outp_set = LPC32XX_GPIO_P2_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P2_DIR_SET, - .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, -}; - -static struct gpio_regs gpio_grp_regs_p3 = { - .inp_state = LPC32XX_GPIO_P3_INP_STATE, - .outp_set = LPC32XX_GPIO_P3_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P2_DIR_SET, - .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, -}; - -struct lpc32xx_gpio_chip { - struct gpio_chip chip; - struct gpio_regs *gpio_grp; -}; - -static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio( - struct gpio_chip *gpc) -{ - return container_of(gpc, struct lpc32xx_gpio_chip, chip); -} - -static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group, - unsigned pin, int input) -{ - if (input) - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->dir_clr); - else - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->dir_set); -} - -static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group, - unsigned pin, int input) -{ - u32 u = GPIO3_PIN_TO_BIT(pin); - - if (input) - __raw_writel(u, group->gpio_grp->dir_clr); - else - __raw_writel(u, group->gpio_grp->dir_set); -} - -static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group, - unsigned pin, int high) -{ - if (high) - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->outp_set); - else - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->outp_clr); -} - -static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group, - unsigned pin, int high) -{ - u32 u = GPIO3_PIN_TO_BIT(pin); - - if (high) - __raw_writel(u, group->gpio_grp->outp_set); - else - __raw_writel(u, group->gpio_grp->outp_clr); -} - -static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group, - unsigned pin, int high) -{ - if (high) - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set); - else - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); -} - -static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group, - unsigned pin) -{ - return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), - pin); -} - -static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group, - unsigned pin) -{ - int state = __raw_readl(group->gpio_grp->inp_state); - - /* - * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped - * to bits 10..14, while GPIOP3-5 is mapped to bit 24. - */ - return GPIO3_PIN_IN_SEL(state, pin); -} - -static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group, - unsigned pin) -{ - return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin); -} - -/* - * GENERIC_GPIO primitives. - */ -static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip, - unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p012(group, pin, 1); - - return 0; -} - -static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip, - unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p3(group, pin, 1); - - return 0; -} - -static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip, - unsigned pin) -{ - return 0; -} - -static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - return __get_gpio_state_p012(group, pin); -} - -static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - return __get_gpio_state_p3(group, pin); -} - -static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - return __get_gpi_state_p3(group, pin); -} - -static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p012(group, pin, 0); - - return 0; -} - -static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p3(group, pin, 0); - - return 0; -} - -static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, - int value) -{ - return 0; -} - -static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_level_p012(group, pin, value); -} - -static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_level_p3(group, pin, value); -} - -static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpo_level_p3(group, pin, value); -} - -static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin) -{ - if (pin < chip->ngpio) - return 0; - - return -EINVAL; -} - -static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = { - { - .chip = { - .label = "gpio_p0", - .direction_input = lpc32xx_gpio_dir_input_p012, - .get = lpc32xx_gpio_get_value_p012, - .direction_output = lpc32xx_gpio_dir_output_p012, - .set = lpc32xx_gpio_set_value_p012, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P0_GRP, - .ngpio = LPC32XX_GPIO_P0_MAX, - .names = gpio_p0_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p0, - }, - { - .chip = { - .label = "gpio_p1", - .direction_input = lpc32xx_gpio_dir_input_p012, - .get = lpc32xx_gpio_get_value_p012, - .direction_output = lpc32xx_gpio_dir_output_p012, - .set = lpc32xx_gpio_set_value_p012, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P1_GRP, - .ngpio = LPC32XX_GPIO_P1_MAX, - .names = gpio_p1_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p1, - }, - { - .chip = { - .label = "gpio_p2", - .direction_input = lpc32xx_gpio_dir_input_p012, - .get = lpc32xx_gpio_get_value_p012, - .direction_output = lpc32xx_gpio_dir_output_p012, - .set = lpc32xx_gpio_set_value_p012, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P2_GRP, - .ngpio = LPC32XX_GPIO_P2_MAX, - .names = gpio_p2_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p2, - }, - { - .chip = { - .label = "gpio_p3", - .direction_input = lpc32xx_gpio_dir_input_p3, - .get = lpc32xx_gpio_get_value_p3, - .direction_output = lpc32xx_gpio_dir_output_p3, - .set = lpc32xx_gpio_set_value_p3, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P3_GRP, - .ngpio = LPC32XX_GPIO_P3_MAX, - .names = gpio_p3_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p3, - }, - { - .chip = { - .label = "gpi_p3", - .direction_input = lpc32xx_gpio_dir_in_always, - .get = lpc32xx_gpi_get_value, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPI_P3_GRP, - .ngpio = LPC32XX_GPI_P3_MAX, - .names = gpi_p3_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p3, - }, - { - .chip = { - .label = "gpo_p3", - .direction_output = lpc32xx_gpio_dir_out_always, - .set = lpc32xx_gpo_set_value, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPO_P3_GRP, - .ngpio = LPC32XX_GPO_P3_MAX, - .names = gpo_p3_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p3, - }, -}; - -void __init lpc32xx_gpio_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) - gpiochip_add(&lpc32xx_gpiochip[i].chip); -} diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 629e744aeb9e..351bd6c84909 100644 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -20,7 +20,7 @@ * Debug output is hardcoded to standard UART 5 */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldreq \rp, =0x40090000 ldrne \rv, =0xF4090000 .endm diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h new file mode 100644 index 000000000000..1816e22a3479 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h @@ -0,0 +1,50 @@ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_GPIO_LPC32XX_H +#define __MACH_GPIO_LPC32XX_H + +/* + * Note! + * Muxed GP pins need to be setup to the GP state in the board level + * code prior to using this driver. + * GPI pins : 28xP3 group + * GPO pins : 24xP3 group + * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group + */ + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 28 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +/* + * A specific GPIO can be selected with this macro + * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) + * See the LPC32x0 User's guide for GPIO group numbers + */ +#define LPC32XX_GPIO(x, y) ((x) + (y)) + +#endif /* __MACH_GPIO_LPC32XX_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h index 67d03da1eee9..e69de29bb2d1 100644 --- a/arch/arm/mach-lpc32xx/include/mach/gpio.h +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -1,74 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/gpio.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <asm-generic/gpio.h> - -/* - * Note! - * Muxed GP pins need to be setup to the GP state in the board level - * code prior to using this driver. - * GPI pins : 28xP3 group - * GPO pins : 24xP3 group - * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group - */ - -#define LPC32XX_GPIO_P0_MAX 8 -#define LPC32XX_GPIO_P1_MAX 24 -#define LPC32XX_GPIO_P2_MAX 13 -#define LPC32XX_GPIO_P3_MAX 6 -#define LPC32XX_GPI_P3_MAX 28 -#define LPC32XX_GPO_P3_MAX 24 - -#define LPC32XX_GPIO_P0_GRP 0 -#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) -#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) -#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) -#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) -#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) - -/* - * A specific GPIO can be selected with this macro - * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) - * See the LPC32x0 User's guide for GPIO group numbers - */ -#define LPC32XX_GPIO(x, y) ((x) + (y)) - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h deleted file mode 100644 index a647dd624afa..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/memory.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset of bank 0 - */ -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 7993b096778e..6d2f0d1b9373 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/platform.h> +#include <mach/gpio-lpc32xx.h> #include "common.h" /* @@ -382,7 +383,7 @@ arch_initcall(lpc32xx_display_uid); MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller") /* Maintainer: Kevin Wells, NXP Semiconductors */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, .timer = &lpc32xx_timer, diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot index 574a4aa8321a..5edf03e2beed 100644 --- a/arch/arm/mach-mmp/Makefile.boot +++ b/arch/arm/mach-mmp/Makefile.boot @@ -1 +1 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 06b5fa853c93..06b5ad774604 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -17,13 +17,13 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> -#include <mach/gpio.h> #include <video/pxa168fb.h> #include <linux/input.h> #include <plat/pxa27x_keypad.h> @@ -160,7 +160,7 @@ static struct mtd_partition aspenite_nand_partitions[] = { }, { .name = "filesystem", .offset = MTDPART_OFS_APPEND, - .size = SZ_48M, + .size = SZ_32M + SZ_16M, .mask_flags = 0, } }; diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index c79162a50f28..e411252e3d39 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 98e25d9aaab6..32776f3739f1 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,11 +9,11 @@ */ #include <linux/init.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index 7e2ebd3efc7c..b6f14d203c25 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -11,7 +11,7 @@ #include <mach/addr-map.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =APB_PHYS_BASE @ physical ldr \rv, =APB_VIRT_BASE @ virtual orr \rp, \rp, #0x00017000 diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h new file mode 100644 index 000000000000..c017a983eced --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -0,0 +1,30 @@ +#ifndef __ASM_MACH_GPIO_PXA_H +#define __ASM_MACH_GPIO_PXA_H + +#include <mach/addr-map.h> +#include <mach/irqs.h> + +#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) + +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +/* NOTE: these macros are defined here to make optimization of + * gpio_{get,set}_value() to work when 'gpio' is a constant. + * Usage of these macros otherwise is no longer recommended, + * use generic GPIO API whenever possible. + */ +#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) + +#include <plat/gpio-pxa.h> + +#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index 7bfb827f3fe3..681262359d1c 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -1,36 +1,13 @@ #ifndef __ASM_MACH_GPIO_H #define __ASM_MACH_GPIO_H -#include <mach/addr-map.h> -#include <mach/irqs.h> #include <asm-generic/gpio.h> -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) - -#define NR_BUILTIN_GPIO IRQ_GPIO_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) #define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START) - #define __gpio_is_inverted(gpio) (0) #define __gpio_is_occupied(gpio) (0) -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - #include <plat/gpio.h> #endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h deleted file mode 100644 index d68b50a2d6a0..000000000000 --- a/arch/arm/mach-mmp/include/mach/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_MEMORY_H -#define __ASM_MACH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 7f005843a707..7fb568d2845b 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -35,6 +35,13 @@ extern struct pxa_device_desc pxa168_device_fb; extern struct pxa_device_desc pxa168_device_keypad; extern struct pxa_device_desc pxa168_device_eth; +struct pxa168_usb_pdata { + /* If NULL, default phy init routine for PXA168 would be called */ + int (*phy_init)(void __iomem *usb_phy_reg_base); +}; +/* pdata can be NULL */ +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata); + static inline int pxa168_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 5d6421d63254..8bfac6612623 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/mfd/max8925.h> diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 079c18861d5c..65d8689e40c9 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -25,7 +24,7 @@ #include <mach/irqs.h> #include <mach/dma.h> #include <mach/mfp.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/devices.h> #include <mach/mmp2.h> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 0156f535dae7..76ca15c00e45 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,10 +20,13 @@ #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <mach/pxa168.h> #include "common.h" #include "clock.h" @@ -83,6 +85,7 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); static APMU_CLK(eth, ETH, 0x09, 0); +static APMU_CLK(usb, USB, 0x12, 0); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { @@ -104,6 +107,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), + INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), }; static int __init pxa168_init(void) @@ -169,3 +173,44 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); + +struct resource pxa168_usb_host_resources[] = { + /* USB Host conroller register base */ + [0] = { + .start = 0xd4209000, + .end = 0xd4209000 + 0x200, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-host", + }, + /* USB PHY register base */ + [1] = { + .start = 0xd4206000, + .end = 0xd4206000 + 0xff, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-phy", + }, + [2] = { + .start = IRQ_PXA168_USB2, + .end = IRQ_PXA168_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32); +struct platform_device pxa168_device_usb_host = { + .name = "pxa168-ehci", + .id = -1, + .dev = { + .dma_mask = &pxa168_usb_host_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + + .num_resources = ARRAY_SIZE(pxa168_usb_host_resources), + .resource = pxa168_usb_host_resources, +}; + +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata) +{ + pxa168_device_usb_host.dev.platform_data = pdata; + return platform_device_register(&pxa168_device_usb_host); +} diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 1464607aa60d..4ebbfbba39fc 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,7 +19,7 @@ #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/mfp.h> #include <mach/devices.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index c296b75c4453..eb5be879fd8c 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -7,18 +7,18 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> -#include <mach/gpio.h> #include "common.h" diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 6bd37a27e5fc..176515a76989 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -93,7 +93,7 @@ static struct mtd_partition ttc_dkb_onenand_partitions[] = { }, { .name = "filesystem", .offset = MTDPART_OFS_APPEND, - .size = SZ_48M, + .size = SZ_32M + SZ_16M, .mask_flags = 0, } }; diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot index 24dfbf8c07c4..9b803a578b4d 100644 --- a/arch/arm/mach-msm/Makefile.boot +++ b/arch/arm/mach-msm/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 18a3c97bc863..a60ab6d04ec5 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -78,8 +78,8 @@ static void __init halibut_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init halibut_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init halibut_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks=1; mi->bank[0].start = PHYS_OFFSET; @@ -93,7 +93,7 @@ static void __init halibut_map_io(void) } MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") - .boot_params = 0x10000100, + .atag_offset = 0x100, .fixup = halibut_fixup, .map_io = halibut_map_io, .init_irq = halibut_init_irq, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index 7a9a03eb189c..5a4882fc6f7a 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -53,8 +53,8 @@ static void __init mahimahi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init mahimahi_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init mahimahi_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 2; mi->bank[0].start = PHYS_OFFSET; @@ -74,7 +74,7 @@ static void __init mahimahi_map_io(void) extern struct sys_timer msm_timer; MACHINE_START(MAHIMAHI, "mahimahi") - .boot_params = 0x20000100, + .atag_offset = 0x100, .fixup = mahimahi_fixup, .map_io = mahimahi_map_io, .init_irq = msm_init_irq, diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index c03f269e2e4b..6d84ee740df4 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <mach/vreg.h> #include <mach/mpp.h> -#include <mach/gpio.h> #include <mach/board.h> #include <mach/msm_iomap.h> @@ -130,7 +129,7 @@ static void __init msm7x2x_map_io(void) } MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -138,7 +137,7 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -146,7 +145,7 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -154,7 +153,7 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index b7a84966b711..71de5062c71e 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -14,7 +14,7 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -24,13 +24,13 @@ #include <linux/smsc911x.h> #include <linux/usb/msm_hsusb.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/memory.h> #include <asm/setup.h> -#include <mach/gpio.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include <mach/dma.h> @@ -42,6 +42,21 @@ extern struct sys_timer msm_timer; +static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { + tag->u.mem.start = 0; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm7x30_reserve(void) +{ + memblock_remove(0x0, SZ_2M); +} + static int hsusb_phy_init_seq[] = { 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ 0x02, 0x36, /* Disable CDR Auto Reset feature */ @@ -106,7 +121,9 @@ static void __init msm7x30_map_io(void) } MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -114,7 +131,9 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -122,7 +141,9 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 35c7ceeb3f29..b04468e7d00e 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -20,16 +20,34 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include "devices.h" +static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8960_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} + static void __init msm8960_map_io(void) { msm_map_msm8960_io(); @@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void) } MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, @@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") MACHINE_END MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 1163b6fd05d2..106170fb1844 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -20,14 +20,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> +static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8x60_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} static void __init msm8x60_map_io(void) { @@ -36,8 +53,6 @@ static void __init msm8x60_map_io(void) static void __init msm8x60_init_irq(void) { - unsigned int i; - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, (void *)MSM_QGIC_CPU_BASE); @@ -49,15 +64,6 @@ static void __init msm8x60_init_irq(void) */ if (!machine_is_msm8x60_sim()) writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); - - /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet - * as they are configured as level, which does not play nice with - * handle_percpu_irq. - */ - for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { - if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) - irq_set_handler(i, handle_percpu_irq); - } } static void __init msm8x60_init(void) @@ -65,6 +71,8 @@ static void __init msm8x60_init(void) } MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -72,6 +80,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") MACHINE_END MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -79,6 +89,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") MACHINE_END MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -86,6 +98,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") MACHINE_END MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 6a96911b0ad5..7e8909c978c3 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -14,7 +14,7 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -32,7 +32,6 @@ #include <mach/board.h> #include <mach/irqs.h> #include <mach/sirc.h> -#include <mach/gpio.h> #include <mach/vreg.h> #include <mach/mmc.h> @@ -193,7 +192,7 @@ static void __init qsd8x50_init(void) } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, @@ -201,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 68f930f07d77..32b465763dbd 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -11,7 +11,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -22,7 +22,6 @@ #include <linux/delay.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -77,8 +76,8 @@ static struct map_desc sapphire_io_desc[] __initdata = { } }; -static void __init sapphire_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init sapphire_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { int smi_sz = parse_tag_smi((const struct tag *)tags); @@ -105,7 +104,7 @@ static void __init sapphire_map_io(void) MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland <swetland@google.com> */ - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .fixup = sapphire_fixup, .map_io = sapphire_map_io, .init_irq = sapphire_init_irq, diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c index f7a9724788b0..8650342b7493 100644 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ b/arch/arm/mach-msm/board-trout-mmc.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/board-trout-mmc.c ** Author: Brian Swetland <swetland@google.com> */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -11,7 +11,6 @@ #include <linux/err.h> #include <linux/debugfs.h> -#include <asm/gpio.h> #include <asm/io.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 729bb49a44ca..25105c1027fe 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/board-trout-mddi.c ** Author: Brian Swetland <swetland@google.com> */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -11,7 +11,6 @@ #include <linux/err.h> #include <asm/io.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <mach/msm_fb.h> diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 814386772c66..6b9b227c87c5 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -48,8 +48,8 @@ static void __init trout_init_irq(void) msm_init_irq(); } -static void __init trout_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init trout_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 1; mi->bank[0].start = PHYS_OFFSET; @@ -93,7 +93,7 @@ static void __init trout_map_io(void) } MACHINE_START(TROUT, "HTC Dream") - .boot_params = 0x10000100, + .atag_offset = 0x100, .fixup = trout_fixup, .map_io = trout_map_io, .init_irq = trout_init_irq, diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index 22a537669624..d9145dfc2a3b 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -18,7 +18,7 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/spinlock.h> -#include <linux/pm_qos_params.h> +#include <linux/pm_qos.h> #include <linux/mutex.h> #include <linux/clk.h> #include <linux/string.h> diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index c4f5e26feb4d..993780f490ad 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -176,12 +176,6 @@ static struct resource resources_sdc1[] = { .name = "cmd_irq", }, { - .start = INT_SDC1_1, - .end = INT_SDC1_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, - { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" }, @@ -204,12 +198,6 @@ static struct resource resources_sdc2[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC2_1, - .end = INT_SDC2_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -233,12 +221,6 @@ static struct resource resources_sdc3[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC3_1, - .end = INT_SDC3_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -262,12 +244,6 @@ static struct resource resources_sdc4[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC4_1, - .end = INT_SDC4_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 12d8deb78d9c..131633b12a34 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -140,12 +140,6 @@ static struct resource resources_sdc1[] = { .name = "cmd_irq", }, { - .start = INT_SDC1_1, - .end = INT_SDC1_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, - { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" }, @@ -168,12 +162,6 @@ static struct resource resources_sdc2[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC2_1, - .end = INT_SDC2_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -197,12 +185,6 @@ static struct resource resources_sdc3[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC3_1, - .end = INT_SDC3_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -226,12 +208,6 @@ static struct resource resources_sdc4[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC4_1, - .end = INT_SDC4_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 646b99ebc773..2dc73ccddb11 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -20,7 +20,7 @@ #include <mach/msm_iomap.h> #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =MSM_DEBUG_UART_PHYS ldr \rv, =MSM_DEBUG_UART_BASE .endm @@ -37,7 +37,7 @@ beq 1001b .endm #else - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rv, #0xff000000 orr \rv, \rv, #0x00f00000 .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S index 12467157afb9..717076f3ca73 100644 --- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S +++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S @@ -8,81 +8,10 @@ * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Migrated the code from ARM MP port to be more consistent - * with interrupt processing , the following still holds true - * however, all interrupts are treated the same regardless of - * if they are local IPI or PPI - * - * Interrupts 0-15 are IPI - * 16-31 are PPI - * (16-18 are the timers) - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * A simple read from the controller will tell us the number of the - * highest priority enabled interrupt. We then just need to check - * whether it is in the valid range for an IRQ (0-1020 inclusive). - * - * Base ARM code assumes that the local (private) peripheral interrupts - * are not valid, we treat them differently, in that the privates are - * handled like normal shared interrupts with the exception that only - * one processor can register the interrupt and the handler must be - * the same for all processors. - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU, - 9-0 =int # */ - - bic \irqnr, \irqstat, #0x1c00 @mask src - cmp \irqnr, #15 - ldr \tmp, =1021 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #16 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h index 36ad50d3bfaa..40a8c178f10d 100644 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -1,26 +1 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * Author: Mike Lockwood <lockwood@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef __ASM_ARCH_MSM_GPIO_H -#define __ASM_ARCH_MSM_GPIO_H - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __ASM_ARCH_MSM_GPIO_H */ +/* empty */ diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h deleted file mode 100644 index f2f8d299ba95..000000000000 --- a/arch/arm/mach-msm/include/mach/memory.h +++ /dev/null @@ -1,35 +0,0 @@ -/* arch/arm/mach-msm/include/mach/memory.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* physical offset of RAM */ -#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A) -#define PLAT_PHYS_OFFSET UL(0x00000000) -#elif defined(CONFIG_ARCH_QSD8X50) -#define PLAT_PHYS_OFFSET UL(0x20000000) -#elif defined(CONFIG_ARCH_MSM7X30) -#define PLAT_PHYS_OFFSET UL(0x00200000) -#elif defined(CONFIG_ARCH_MSM8X60) -#define PLAT_PHYS_OFFSET UL(0x40200000) -#elif defined(CONFIG_ARCH_MSM8960) -#define PLAT_PHYS_OFFSET UL(0x40200000) -#else -#define PLAT_PHYS_OFFSET UL(0x10000000) -#endif - -#endif - diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h index 5631b51cec46..ffcd9e3a6a7e 100644 --- a/arch/arm/mach-msm/include/mach/mmc.h +++ b/arch/arm/mach-msm/include/mach/mmc.h @@ -8,13 +8,6 @@ #include <linux/mmc/card.h> #include <linux/mmc/sdio_func.h> -struct embedded_sdio_data { - struct sdio_cis cis; - struct sdio_cccr cccr; - struct sdio_embedded_func *funcs; - int num_funcs; -}; - struct msm_mmc_gpio { unsigned no; const char *name; @@ -29,9 +22,9 @@ struct msm_mmc_platform_data { unsigned int ocr_mask; /* available voltages */ u32 (*translate_vdd)(struct device *, unsigned int); unsigned int (*status)(struct device *); - struct embedded_sdio_data *embedded_sdio; int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); struct msm_mmc_gpio_data *gpio_data; + void (*init_card)(struct mmc_card *card); }; #endif diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 1a1af9e56250..727659520912 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -156,6 +156,12 @@ void __init smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 63621f152c98..afeeca52fc66 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -71,12 +71,16 @@ enum timer_location { struct msm_clock { struct clock_event_device clockevent; struct clocksource clocksource; - struct irqaction irq; + unsigned int irq; void __iomem *regbase; uint32_t freq; uint32_t shift; void __iomem *global_counter; void __iomem *local_counter; + union { + struct clock_event_device *evt; + struct clock_event_device __percpu **percpu_evt; + }; }; enum { @@ -87,13 +91,10 @@ enum { static struct msm_clock msm_clocks[]; -static struct clock_event_device *local_clock_event; static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = dev_id; - if (smp_processor_id() != 0) - evt = local_clock_event; + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; if (evt->event_handler == NULL) return IRQ_HANDLED; evt->event_handler(evt); @@ -171,13 +172,7 @@ static struct msm_clock msm_clocks[] = { .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }, - .irq = { - .name = "gp_timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, - .handler = msm_timer_interrupt, - .dev_id = &msm_clocks[0].clockevent, - .irq = INT_GP_TIMER_EXP - }, + .irq = INT_GP_TIMER_EXP, .freq = GPT_HZ, }, [MSM_CLOCK_DGT] = { @@ -196,13 +191,7 @@ static struct msm_clock msm_clocks[] = { .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }, - .irq = { - .name = "dg_timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, - .handler = msm_timer_interrupt, - .dev_id = &msm_clocks[1].clockevent, - .irq = INT_DEBUG_TIMER_EXP - }, + .irq = INT_DEBUG_TIMER_EXP, .freq = DGT_HZ >> MSM_DGT_SHIFT, .shift = MSM_DGT_SHIFT, } @@ -261,10 +250,30 @@ static void __init msm_timer_init(void) printk(KERN_ERR "msm_timer_init: clocksource_register " "failed for %s\n", cs->name); - res = setup_irq(clock->irq.irq, &clock->irq); + ce->irq = clock->irq; + if (cpu_is_msm8x60() || cpu_is_msm8960()) { + clock->percpu_evt = alloc_percpu(struct clock_event_device *); + if (!clock->percpu_evt) { + pr_err("msm_timer_init: memory allocation " + "failed for %s\n", ce->name); + continue; + } + + *__this_cpu_ptr(clock->percpu_evt) = ce; + res = request_percpu_irq(ce->irq, msm_timer_interrupt, + ce->name, clock->percpu_evt); + if (!res) + enable_percpu_irq(ce->irq, 0); + } else { + clock->evt = ce; + res = request_irq(ce->irq, msm_timer_interrupt, + IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING, + ce->name, &clock->evt); + } + if (res) - printk(KERN_ERR "msm_timer_init: setup_irq " - "failed for %s\n", cs->name); + pr_err("msm_timer_init: request_irq failed for %s\n", + ce->name); clockevents_register_device(ce); } @@ -273,6 +282,7 @@ static void __init msm_timer_init(void) #ifdef CONFIG_SMP int __cpuinit local_timer_setup(struct clock_event_device *evt) { + static bool local_timer_inited; struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER]; /* Use existing clock_event for cpu 0 */ @@ -281,12 +291,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); - if (!local_clock_event) { + if (!local_timer_inited) { writel(0, clock->regbase + TIMER_ENABLE); writel(0, clock->regbase + TIMER_CLEAR); writel(~0, clock->regbase + TIMER_MATCH_VAL); + local_timer_inited = true; } - evt->irq = clock->irq.irq; + evt->irq = clock->irq; evt->name = "local_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT; evt->rating = clock->clockevent.rating; @@ -298,17 +309,17 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) clockevent_delta2ns(0xf0000000 >> clock->shift, evt); evt->min_delta_ns = clockevent_delta2ns(4, evt); - local_clock_event = evt; - - gic_enable_ppi(clock->irq.irq); + *__this_cpu_ptr(clock->percpu_evt) = evt; + enable_percpu_irq(evt->irq, 0); clockevents_register_device(evt); return 0; } -inline int local_timer_ack(void) +void local_timer_stop(struct clock_event_device *evt) { - return 1; + evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); + disable_percpu_irq(evt->irq); } #endif diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot index 67039c3e0c48..760a0efe7580 100644 --- a/arch/arm/mach-mv78xx0/Makefile.boot +++ b/arch/arm/mach-mv78xx0/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 20f3f125ed2b..0e94268d6e6f 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -145,7 +145,7 @@ subsys_initcall(wxl_pci_init); MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = wxl_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index df5aebe5b0fa..50b85ae2da52 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -93,7 +93,7 @@ subsys_initcall(db78x00_pci_init); MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db78x00_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S index 04891428e48b..a7df02b049b7 100644 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/mv78xx0.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =MV78XX0_REGS_PHYS_BASE ldr \rv, =MV78XX0_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h deleted file mode 100644 index a648c51f2e42..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 3e24431bb5ea..e421b701663b 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/irq.h> -#include <asm/gpio.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 59b7686b9209..cf4e494d44bf 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -7,13 +7,12 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> #include <plat/mpp.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index d927f14c6810..e85222e53578 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -78,7 +78,7 @@ subsys_initcall(rd78x00_pci_init); MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd78x00_masa_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot index e928be1b6757..ca207ca305ec 100644 --- a/arch/arm/mach-mx5/Makefile.boot +++ b/arch/arm/mach-mx5/Makefile.boot @@ -1,9 +1,9 @@ - zreladdr-$(CONFIG_ARCH_MX50) := 0x70008000 + zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) := 0x90008000 + zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000 + zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 68934ea8725a..e01af948e043 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -293,7 +293,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index ff096d587299..b41fc274a425 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -331,7 +331,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 07a38154da21..a50174e69e2f 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -169,7 +169,7 @@ static struct sys_timer mx51_3ds_timer = { MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 11b0ff67f89d..468926a48fe0 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -416,7 +416,7 @@ static struct sys_timer mx51_babbage_timer = { MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 551daf85ff8c..c36880da03f0 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -280,7 +280,7 @@ static struct sys_timer mx51_efikamx_timer = { MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 8a9bca22beb5..ba5436a9fb1a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -266,7 +266,7 @@ static struct sys_timer mx51_efikasb_timer = { }; MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot index eb541e0291da..07b11fe6453f 100644 --- a/arch/arm/mach-mxs/Makefile.boot +++ b/arch/arm/mach-mxs/Makefile.boot @@ -1 +1 @@ -zreladdr-y := 0x40008000 +zreladdr-y += 0x40008000 diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 79650a1ad78d..714570d83668 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -30,7 +30,7 @@ #define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual .endm diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h index 828ccccb6aad..bb11e63261e4 100644 --- a/arch/arm/mach-mxs/include/mach/gpio.h +++ b/arch/arm/mach-mxs/include/mach/gpio.h @@ -20,16 +20,8 @@ #ifndef __MACH_MXS_GPIO_H__ #define __MACH_MXS_GPIO_H__ -#include <asm-generic/gpio.h> - #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) #endif /* __MACH_MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h deleted file mode 100644 index b5420a5c2d4b..000000000000 --- a/arch/arm/mach-mxs/include/mach/memory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_MEMORY_H__ -#define __MACH_MXS_MEMORY_H__ - -#define PHYS_OFFSET UL(0x40000000) - -#endif /* __MACH_MXS_MEMORY_H__ */ diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot index b81cf6aff0ac..534a4d27055e 100644 --- a/arch/arm/mach-netx/Makefile.boot +++ b/arch/arm/mach-netx/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S index 56a915228180..247781e096e2 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/mach-netx/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include "hardware.h" - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00000a00 orr \rv, \rp, #io_p2v(0x00100000) @ virtual orr \rp, \rp, #0x00100000 @ physical diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h deleted file mode 100644 index 59561496c36e..000000000000 --- a/arch/arm/mach-netx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/memory.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif - diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index ca8b203a3c99..90903dd44cbc 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -200,7 +200,7 @@ static void __init nxdb500_init(void) } MACHINE_START(NXDB500, "Hilscher nxdb500") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, .timer = &netx_timer, diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index d775cbe07278..c63384aba500 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -93,7 +93,7 @@ static void __init nxdkn_init(void) } MACHINE_START(NXDKN, "Hilscher nxdkn") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, .timer = &netx_timer, diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index de369cd1dcbe..8f548ec83ad2 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -177,7 +177,7 @@ static void __init nxeb500hmi_init(void) } MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, .timer = &netx_timer, diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot index c7e75acfe6c9..ff0a4b5b0a82 100644 --- a/arch/arm/mach-nomadik/Makefile.boot +++ b/arch/arm/mach-nomadik/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 139930350d93..0cbb74c96ef7 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> +#include <plat/gpio-nomadik.h> #include <plat/mtu.h> #include <mach/setup.h> @@ -276,7 +277,7 @@ static void __init nhk8815_platform_init(void) MACHINE_START(NOMADIK, "NHK8815") /* Maintainer: ST MicroElectronics */ - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = cpu8815_map_io, .init_irq = cpu8815_init_irq, .timer = &nomadik_timer, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index ac58e3b03b1a..dc67717db6f0 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -21,8 +21,8 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index abfe25a08d6b..0fc2f6f1cc97 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -3,8 +3,8 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> -#include <linux/gpio.h> #include <linux/platform_device.h> +#include <plat/gpio-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S index e7151b4b8889..735417922ce2 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00100000 add \rp, \rp, #0x000fb000 add \rv, \rp, #0xf0000000 @ virtual base diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h index 7a81a0420343..efdde0ae0a4f 100644 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -1,6 +1,4 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#include <plat/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h deleted file mode 100644 index d3325211ba6a..000000000000 --- a/arch/arm/mach-nomadik/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * mach-nomadik/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot index a057b546b6e5..6c3d421c2d11 100644 --- a/arch/arm/mach-nuc93x/Makefile.boot +++ b/arch/arm/mach-nuc93x/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h deleted file mode 100644 index ef9864b002a6..000000000000 --- a/arch/arm/mach-nuc93x/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c index d70257042480..1f741b1c1604 100644 --- a/arch/arm/mach-nuc93x/mach-nuc932evb.c +++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c @@ -35,7 +35,6 @@ static void __init nuc932evb_init(void) MACHINE_START(NUC932EVB, "NUC932EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc932evb_map_io, .init_irq = nuc93x_init_irq, .init_machine = nuc932evb_init, diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c index 2f90f9dc6e30..f9807c029ec5 100644 --- a/arch/arm/mach-nuc93x/time.c +++ b/arch/arm/mach-nuc93x/time.c @@ -82,7 +82,7 @@ static void nuc93x_timer_setup(void) timer0_load = (rate / TICKS_PER_SEC); __raw_writel(timer0_load, REG_TICR0); - val |= (PERIOD | COUNTEN | INTEN | PRESCALE);; + val |= (PERIOD | COUNTEN | INTEN | PRESCALE); __raw_writel(val, REG_TCSR0); } diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot index 292d56c5a888..13bda8dbd604 100644 --- a/arch/arm/mach-omap1/Makefile.boot +++ b/arch/arm/mach-omap1/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 312ea6b0409d..4ea60e2038ea 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -30,7 +30,6 @@ #include <plat/io.h> #include <plat/board-ams-delta.h> -#include <mach/gpio.h> #include <plat/keypad.h> #include <plat/mux.h> #include <plat/usb.h> @@ -386,7 +385,7 @@ static void __init ams_delta_map_io(void) MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell <noodles@earth.li> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = ams_delta_map_io, .reserve = omap_reserve, .init_irq = ams_delta_init_irq, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a6b1bea50371..31e089b6f03f 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -28,7 +28,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/flash.h> #include <plat/fpga.h> @@ -389,7 +388,7 @@ static void __init omap_fsample_map_io(void) MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland <swetland@google.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_fsample_map_io, .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 04fc356c40fa..05c6e9d858f3 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -22,7 +22,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> @@ -94,7 +93,7 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") /* Maintainer: Tony Lindgren <tony@atomide.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_generic_map_io, .reserve = omap_reserve, .init_irq = omap_generic_init_irq, diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index f2fc43d8382b..da0e37d40823 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -11,13 +11,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index cb7fb1aa3dca..c2e279173d42 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -18,7 +18,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -32,7 +32,6 @@ #include <linux/smc91x.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -461,7 +460,7 @@ static void __init h2_map_io(void) MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = h2_map_io, .reserve = omap_reserve, .init_irq = h2_init_irq, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 2098525e7cc5..f8242aa9b763 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -11,13 +11,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 31f34875ffad..8f5b6af7ed59 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -13,7 +13,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/types.h> #include <linux/init.h> #include <linux/major.h> @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/page.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -449,7 +448,7 @@ static void __init h3_map_io(void) MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = h3_map_io, .reserve = omap_reserve, .init_irq = h3_init_irq, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 36e06ea7ec65..fcd1a3c31896 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -23,7 +23,6 @@ * 02110-1301, USA. * */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -611,7 +610,7 @@ static void __init htcherald_init_irq(void) MACHINE_START(HERALD, "HTC Herald") /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ /* Maintainer: wing-linux.sourceforge.net */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = htcherald_map_io, .reserve = omap_reserve, .init_irq = htcherald_init_irq, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 0b1ba462d388..c2234caf8a7a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -15,7 +15,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <plat/mux.h> #include <plat/flash.h> #include <plat/fpga.h> -#include <mach/gpio.h> #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> @@ -459,7 +458,7 @@ static void __init innovator_map_io(void) MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = innovator_map_io, .reserve = omap_reserve, .init_irq = innovator_init_irq, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5469ce247ffe..02789c5d3703 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> @@ -26,7 +26,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> @@ -264,7 +263,7 @@ static void __init omap_nokia770_map_io(void) } MACHINE_START(NOKIA770, "Nokia 770") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_nokia770_map_io, .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index b08a21380772..e4dca1deebb4 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -25,7 +25,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -42,7 +42,6 @@ #include <linux/i2c/tps65010.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -583,7 +582,7 @@ static void __init osk_map_io(void) MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = osk_map_io, .reserve = omap_reserve, .init_irq = osk_init_irq, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 459cb6bfed55..50c4e398bcc8 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -16,7 +16,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -33,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> @@ -275,7 +274,7 @@ static void __init omap_palmte_map_io(void) } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_palmte_map_io, .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index b214f45f646c..273771cb1b61 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -12,6 +12,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -30,7 +31,6 @@ #include <asm/mach/map.h> #include <plat/led.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> @@ -321,7 +321,7 @@ static void __init omap_palmtt_map_io(void) } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_palmtt_map_io, .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 9b0ea48d35fd..de36ade38ef7 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -15,6 +15,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -32,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> @@ -341,7 +341,7 @@ omap_palmz71_map_io(void) } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_palmz71_map_io, .reserve = omap_reserve, .init_irq = omap_palmz71_init_irq, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 67acd4142639..04b1befaced6 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -28,7 +28,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> #include <plat/flash.h> @@ -350,7 +349,7 @@ static void __init omap_perseus2_map_io(void) MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman <kjh@hilman.org> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index e8ddd86e3fda..b59f78850e69 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -12,11 +12,11 @@ * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/platform_device.h> #include <mach/hardware.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include <plat/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 9c3b7c52d9cf..2bea941741d5 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -14,7 +14,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/dma.h> @@ -421,7 +420,7 @@ static void __init omap_sx1_map_io(void) } MACHINE_START(SX1, "OMAP310 based Siemens SX1") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_sx1_map_io, .reserve = omap_reserve, .init_irq = omap_sx1_init_irq, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 036edc0ee9b6..940faed82be2 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -33,7 +34,6 @@ #include <plat/board-voiceblue.h> #include <plat/common.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> @@ -301,7 +301,7 @@ static void __init voiceblue_init(void) MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = voiceblue_map_io, .reserve = omap_reserve, .init_irq = voiceblue_init_irq, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 36f26c3fa25e..7c50ecf68123 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -10,6 +10,7 @@ */ #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +25,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> -#include <mach/gpio.h> #include <plat/mmc.h> #include <plat/omap7xx.h> #include <plat/mcbsp.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index cddbf8b089ce..0a17a1a7e00d 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -17,6 +17,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> @@ -28,7 +29,6 @@ #include <asm/mach/irq.h> #include <plat/fpga.h> -#include <mach/gpio.h> static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 62856044eb63..2b36a281dc84 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,13 +13,8 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <plat/serial.h> -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0x0 omap_uart_virt: .word 0x0 @@ -31,26 +26,24 @@ omap_uart_virt: .word 0x0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +9: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled - ldr \rp, [\rp, #0] + and \rp, pc, #0xff000000 + ldr \rv, =OMAP_UART_INFO_OFS + ldr \rp, [\rp, \rv] /* Select the UART to use based on the UART1 scratchpad value */ 10: cmp \rp, #0 @ no port configured? @@ -74,17 +67,18 @@ omap_uart_virt: .word 0x0 /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0xff000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0xff000000 @ phys base add \rp, \rp, #0xfe000000 @ virt base - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt b 9b -99: + + .align +99: .word . + .word omap_uart_phys + .ltorg + +100: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index e9b600c113ef..c6337645ba8a 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -2,4 +2,55 @@ * arch/arm/mach-omap1/include/mach/memory.h */ -#include <plat/memory.h> +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PLAT_PHYS_OFFSET UL(0x10000000) + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. We do the address translation based on the + * device overriding the defaults used in the dma-mapping API. + * Note that the is_lbus_device() test is not very efficient on 1510 + * because of the strncmp(). + */ +#ifdef CONFIG_ARCH_OMAP15XX + +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) + +#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) +#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) +#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) + +#define __arch_pfn_to_dma(dev, pfn) \ + ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ + if (is_lbus_device(dev)) \ + __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ + __dma; }) + +#define __arch_dma_to_pfn(dev, addr) \ + ({ dma_addr_t __dma = addr; \ + if (is_lbus_device(dev)) \ + __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ + __phys_to_pfn(__dma); \ + }) + +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __phys_to_virt(addr)); }) + +#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ + (dma_addr_t) (is_lbus_device(dev) ? \ + virt_to_lbus(__addr) : \ + __virt_to_phys(__addr)); }) + +#endif /* CONFIG_ARCH_OMAP15XX */ + +#endif diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 870886a29594..1cfa1b6bb62b 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -121,6 +121,7 @@ void __init omap1_map_common_io(void) #endif omap_sram_init(); + omap_init_consistent_dma_size(); } /* diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index e2b9c901ab67..e5b104b7fce6 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -35,7 +35,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/module.h> #include <linux/sched.h> @@ -45,7 +45,6 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> #include <plat/cpu.h> #define IRQ_BANK(irq) ((irq) >> 5) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index b4f9be52e1e8..4b818eb9f911 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -9,6 +9,7 @@ * The "surfer" expansion board and H2 sample board also have two-color * green+red LEDs (in parallel), used here for timer and idle indicators. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> @@ -20,7 +21,6 @@ #include <asm/mach-types.h> #include <plat/fpga.h> -#include <mach/gpio.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 499d7ad8697d..da09f4364979 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -3,14 +3,13 @@ * * LED driver for OSK with optional Mistral QVGA board */ +#include <linux/gpio.h> #include <linux/init.h> #include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <mach/gpio.h> - #include "leds.h" diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 22eb11dde9e7..ae6dd93b8ddc 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -3,13 +3,13 @@ * * OMAP LEDs dispatcher */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <mach/gpio.h> #include <plat/mux.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 943072d5a1d5..7868e75ad077 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/pm_runtime.h> +#include <linux/pm_clock.h> #include <linux/platform_device.h> #include <linux/mutex.h> #include <linux/clk.h> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 550ca9d9991d..93ae8f29727e 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +24,6 @@ #include <plat/board.h> #include <plat/mux.h> -#include <mach/gpio.h> #include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 57b66d590c52..89bfb49389f2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -36,6 +36,7 @@ config ARCH_OMAP3 select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM + select ARM_CPU_SUSPEND if PM config ARCH_OMAP4 bool "TI OMAP4" @@ -50,6 +51,7 @@ config ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select USB_ARCH_HAS_EHCI + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f34336560437..7317a2b39dd1 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -242,14 +242,11 @@ obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ - hsmmc.o \ - omap_phy_internal.o + hsmmc.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ - hsmmc.o \ - omap_phy_internal.o + hsmmc.o -obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \ - omap_phy_internal.o \ +obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o @@ -260,6 +257,8 @@ obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o +obj-y += omap_phy_internal.o + obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o obj-y += usb-host.o diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 565aff7f37a9..b03e562acc60 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 2028464cf5b9..87f43ade4405 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -193,7 +193,8 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap2_pmic_init("twl4030", &sdp2430_twldata); + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + &sdp2430_twldata); return 0; } @@ -256,7 +257,7 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_2430sdp_map_io, .init_early = omap_2430sdp_init_early, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index bd600cfb7f80..2430531b2239 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -729,7 +729,7 @@ static void __init omap_3430sdp_init(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_3430sdp_init_early, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index e4f37b57a0c4..8b5b5aa751ed 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -215,7 +215,7 @@ static void __init omap_sdp_init(void) } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_sdp_init_early, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index c7cef44c75d4..be931105d681 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -838,7 +838,7 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_4430sdp_map_io, .init_early = omap_4430sdp_init_early, diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 933e9353cb37..db110fdb8b2c 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -98,7 +98,7 @@ static void __init am3517_crane_init(void) } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_crane_init_early, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f3006c304150..1325085e453d 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -490,7 +490,7 @@ static void __init am3517_evm_init(void) } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_evm_init_early, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 70211703ff9f..67800e647d7a 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -350,7 +350,7 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_apollon_map_io, .init_early = omap_apollon_init_early, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 3af8aab435b5..38179c175503 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -634,7 +634,7 @@ static void __init cm_t3730_init(void) } MACHINE_START(CM_T35, "Compulab CM-T35") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, @@ -644,7 +644,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 05c72f4c1b57..aed9c29f9fae 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -299,7 +299,7 @@ static void __init cm_t3517_init(void) } MACHINE_START(CM_T3517, "Compulab CM-T3517") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t3517_init_early, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index b6002ec31c6a..99a42432ac93 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -667,7 +667,7 @@ static void __init devkit8000_init(void) } MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = devkit8000_init_early, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 54db41a84a9b..4431ad364565 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,7 +15,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> @@ -25,7 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> @@ -66,7 +65,7 @@ static void __init omap_generic_map_io(void) /* XXX This machine entry name should be updated */ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_generic_map_io, .init_early = omap_generic_init_early, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 45de2b319ec9..82421a4cfa92 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> @@ -382,7 +381,7 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_h4_map_io, .init_early = omap_h4_init_early, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 35be778caf1b..7040352b16b4 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -672,7 +672,7 @@ static void __init igep_init(void) } MACHINE_START(IGEP0020, "IGEP v2 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, @@ -682,7 +682,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 218764c9377e..abe8c7e496a2 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <mach/gpio.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> @@ -333,7 +332,7 @@ static void __init omap_ldp_init(void) } MACHINE_START(OMAP_LDP, "OMAP LDP board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_ldp_init_early, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e11f0c5d608a..6ce748154f24 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -695,7 +695,7 @@ static void __init n8x0_init_machine(void) } MACHINE_START(NOKIA_N800, "Nokia N800") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, @@ -705,7 +705,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, @@ -715,7 +715,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3ae16b4e3f52..1fde8a0474bb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -557,7 +557,7 @@ static void __init omap3_beagle_init(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_beagle_init_early, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c452b3f3331a..15c69a0c1ce5 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -681,7 +681,7 @@ static void __init omap3_evm_init(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_evm_init_early, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 703aeb5b8fd4..01354a214caf 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -209,7 +209,7 @@ static void __init omap3logic_init(void) } MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, .init_irq = omap3_init_irq, @@ -218,7 +218,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, .init_irq = omap3_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 080d7bd6795e..ace56938dd3b 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -606,7 +606,7 @@ static void __init omap3pandora_init(void) } MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3pandora_init_early, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 8e104980ea26..ba13e1d5d0ab 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -494,7 +494,7 @@ static void __init omap3_stalker_init(void) MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 852ea0464057..49e4bd207cb6 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -404,7 +404,7 @@ static void __init omap3_touchbook_init(void) MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_touchbook_init_early, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 9aaa96057666..683bede73d54 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -583,7 +583,7 @@ static void __init omap4_panda_map_io(void) MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") /* Maintainer: David Anders - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap4_panda_map_io, .init_early = omap4_panda_init_early, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f949a9954d76..e592fb134c4e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -561,7 +561,7 @@ static void __init overo_init(void) } MACHINE_START(OVERO, "Gumstix Overo") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = overo_init_early, diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 7dfed24ee12e..9a8ce239ba9e 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -153,7 +153,7 @@ static void __init rm680_map_io(void) } MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = rm680_map_io, .init_early = rm680_init_early, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 5a886cd2c598..ba1aa07bdb29 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -900,7 +900,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = { }; static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { - .id = TPA6130A2, .power_gpio = 98, }; diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 5ea142f9bc97..a6c473bbb3d6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -156,7 +156,7 @@ static void __init rx51_reserve(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index a85d5b0b11da..e41958acb6b6 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -48,7 +48,7 @@ static void __init ti8168_evm_map_io(void) MACHINE_START(TI8168EVM, "ti8168evm") /* Maintainer: Texas Instruments */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = ti8168_evm_map_io, .init_early = ti8168_init_early, .init_irq = ti816x_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 8a98c3c303fc..72f1db4863e5 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -133,7 +133,7 @@ static void __init omap_zoom_init(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, @@ -143,7 +143,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index ffd55b1c4396..b9b844683147 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2af0e3f00ce1..c0b6fbda3408 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3376,10 +3376,18 @@ int __init omap4xxx_clk_init(void) } else if (cpu_is_omap446x()) { cpu_mask = RATE_IN_4460; cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); - omap2_clk_disable_clkdm_control(); + + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab7db083f97f..8f0890685d7b 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -747,6 +747,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -818,6 +819,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 1077ad663f93..ae8ea5b3b1a0 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -8,7 +8,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -26,7 +26,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mcbsp.h> -#include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> @@ -330,6 +329,38 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ + defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) + +static struct omap_device_pm_latency omap_mcpdm_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static void omap_init_mcpdm(void) +{ + struct omap_hwmod *oh; + struct omap_device *od; + + oh = omap_hwmod_lookup("mcpdm"); + if (!oh) { + printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + return; + } + + od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, + omap_mcpdm_latency, + ARRAY_SIZE(omap_mcpdm_latency), 0); + if (IS_ERR(od)) + printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n"); +} +#else +static inline void omap_init_mcpdm(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -683,6 +714,7 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_audio(); + omap_init_mcpdm(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9b45c76e1d3..097a42d81e59 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); timeout = jiffies + msecs_to_jiffies(5); @@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 48adfe9fe4f3..13f98e59cfef 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,15 +13,10 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <plat/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0 omap_uart_virt: .word 0 @@ -34,26 +29,25 @@ omap_uart_lsr: .word 0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -10: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +10: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled - ldr \rp, [\rp, #0] + mov \rp, pc + ldr \rv, =OMAP_UART_INFO_OFS + and \rp, \rp, #0xff000000 + ldr \rp, [\rp, \rv] /* Select the UART to use based on the UART1 scratchpad value */ cmp \rp, #0 @ no port configured? @@ -106,50 +100,47 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) b 98f + 95: ldr \rp, =ZOOM_UART_BASE - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT - add \rv, \rv, #4 @ omap_uart_virt - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #8] @ omap_uart_lsr b 10b /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0x48000000 @ phys base add \rp, \rp, #0xfa000000 @ virt base - add \rv, \rv, #4 @ omap_uart_virt - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #8] @ omap_uart_lsr b 10b -99: + + .align +99: .word . + .word omap_uart_phys + .ltorg + +100: /* Pass the UART_LSR reg address */ + ldr \tmp, [\tmp, #8] @ omap_uart_lsr + add \rp, \rp, \tmp + add \rv, \rv, \tmp .endm .macro senduart,rd,rx - strb \rd, [\rx] + orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset + bic \rx, \rx, #0xff @ get base (THR) reg address + strb \rd, [\rx] @ send lower byte of rd + orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR) + bic \rd, \rd, #(0xff << 24) @ restore original rd .endm .macro busyuart,rd,rx -1001: mrc p15, 0, \rd, c1, c0 - tst \rd, #1 @ MMU enabled? - ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled - ldrne \rd, =omap_uart_lsr @ MMU enabled - ldr \rd, [\rd, #0] - ldrb \rd, [\rx, \rd] +1001: ldrb \rd, [\rx] @ rx contains UART_LSR address and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) bne 1001b diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index ceb8b7e593d7..feb90a10945a 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -78,7 +78,7 @@ 4401: ldr \irqstat, [\base, #GIC_CPU_INTACK] ldr \tmp, =1021 bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #29 + cmp \irqnr, #15 cmpcc \irqnr, \irqnr cmpne \irqnr, \tmp cmpcs \irqnr, \irqnr @@ -101,18 +101,6 @@ it cs cmpcs \irqnr, \irqnr .endm - - /* As above, this assumes that irqstat and base are preserved */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - itt eq - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm #endif /* CONFIG_SMP */ #else /* MULTI_OMAP2 */ diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h deleted file mode 100644 index ca6d32a917dd..000000000000 --- a/arch/arm/mach-omap2/include/mach/memory.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/memory.h - */ - -#include <plat/memory.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2ce1ce6fb4db..d6d01cb7f28a 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -16,7 +16,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -250,6 +249,7 @@ static void __init _omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); + omap_init_consistent_dma_size(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ce65e9329c7b..889464dc7b2d 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -109,12 +109,10 @@ void __init smp_init_cpus(void) ncores = scu_get_core_count(scu_base); /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "OMAP4: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 16743c7d6e8e..408193d8e044 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 6201422c0606..79325c65c23c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5430,7 +5430,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_mcbsp4_hwmod, /* mcpdm class */ -/* &omap44xx_mcpdm_hwmod, */ + &omap44xx_mcpdm_hwmod, /* mcspi class */ &omap44xx_mcspi1_hwmod, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb35911a32..472bf22d5e84 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -130,7 +130,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } else { hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } @@ -156,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf10..ef71fdd40fc4 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register + * @pwrdms: array of struct powerdomain pointers to register * @custom_funcs: func pointers for arch specific implementations * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Loop through the array of powerdomains @pwrdms, registering all + * that are available on the current CPU. Also, program all + * powerdomain target state as ON; this is to prevent domains from + * hitting low power states (if bootloader has target states set to + * something other than ON) and potentially even losing context while + * PM is not fully initialized. The PM late init code can then program + * the desired target state for all the power domains. No return + * value. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs) { struct powerdomain **p = NULL; + struct powerdomain *temp_p; if (!custom_funcs) WARN(1, "powerdomain: No custom pwrdm functions registered\n"); else arch_pwrdm = custom_funcs; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) + if (pwrdms) { + for (p = pwrdms; *p; p++) _pwrdm_register(*p); } + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); } /** diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 34c01a7de810..f49804f181d4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currently this function registers interrrupt handler for a particular SR + * Currently this function registers interrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a65145b02a55..19e4dac62a8c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -137,9 +137,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); - if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot index 67039c3e0c48..760a0efe7580 100644 --- a/arch/arm/mach-orion5x/Makefile.boot +++ b/arch/arm/mach-orion5x/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0ab531d047fc..22ace0bf2f92 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -308,8 +308,8 @@ void __init orion5x_init(void) * Many orion-based systems have buggy bootloader implementations. * This is a common fixup for bogus memory tags. */ -void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, - char **from, struct meminfo *meminfo) +void __init tag_fixup_mem32(struct tag *t, char **from, + struct meminfo *meminfo) { for (; t->hdr.size; t = tag_next(t)) if (t->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 3e5499dda49a..909489f4d23e 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -53,11 +53,9 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -struct machine_desc; struct meminfo; struct tag; -extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, - char **, struct meminfo *); +extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); #endif diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 19cf5bf99f1b..8c8300951f46 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -336,7 +336,7 @@ static void __init d2net_init(void) #ifdef CONFIG_MACH_D2NET MACHINE_START(D2NET, "LaCie d2 Network") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, @@ -348,7 +348,7 @@ MACHINE_END #ifdef CONFIG_MACH_BIGDISK MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index a3e3e9e5e328..4b79a80d5e1f 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -9,7 +9,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/mv643xx_eth.h> #include <linux/i2c.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -359,7 +358,7 @@ static void __init db88f5281_init(void) MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db88f5281_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index a6eddae82a0b..343f60e9639f 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -13,7 +13,7 @@ * License, or (at your option) any later version. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> @@ -30,7 +30,6 @@ #include <linux/phy.h> #include <linux/marvell_phy.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -77,7 +76,7 @@ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) /* * Check for devices with hard-wired IRQs. */ - irq = orion5x_pci_map_irq(const dev, slot, pin); + irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; @@ -730,7 +729,7 @@ static void __init dns323_init(void) /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dns323_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index b67cff0d4cfe..70a4e9265f06 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -251,7 +251,7 @@ static void __init edmini_v2_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") /* Maintainer: Christopher Moore <moore@free.fr> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = edmini_v2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index 5e3bf5b68aec..f340ed8f8dd0 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,7 +10,7 @@ #include <mach/orion5x.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =ORION5X_REGS_PHYS_BASE ldr \rv, =ORION5X_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h deleted file mode 100644 index 6769917882fe..000000000000 --- a/arch/arm/mach-orion5x/include/mach/memory.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/memory.h - * - * Marvell Orion memory definitions - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 43cf8bc9767b..b1b45fff776e 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -9,12 +9,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 00381249d766..d3cd3f63258a 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -380,7 +379,7 @@ static void __init kurobox_pro_init(void) #ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, @@ -393,7 +392,7 @@ MACHINE_END #ifdef CONFIG_MACH_LINKSTATION_PRO MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 5065803ca82a..9503fff404e3 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -318,7 +318,7 @@ static void __init lschl_init(void) MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = lschl_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 8503d0a42d41..ed6d772f4a24 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -265,7 +265,7 @@ static void __init ls_hgl_init(void) MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = ls_hgl_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 9c82723c05c0..743f7f1db181 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -267,7 +267,7 @@ static void __init lsmini_init(void) #ifdef CONFIG_MACH_LINKSTATION_MINI MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = lsmini_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index ef3bb8e9a4c2..6020e26b1c71 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -261,7 +261,7 @@ static void __init mss2_init(void) MACHINE_START(MSS2, "Maxtor Shared Storage II") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mss2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 63ff10c3c464..201ae3676289 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <mach/orion5x.h> #include "common.h" @@ -229,7 +228,7 @@ static void __init mv2120_init(void) /* Warning: HP uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(MV2120, "HP Media Vault mv2120") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mv2120_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index e43b39cc7fe9..6197c79a2ecb 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -419,7 +419,7 @@ static void __init net2big_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(NET2BIG, "LaCie 2Big Network") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = net2big_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 28b8760ab9fa..bc4a920e26ee 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 291d22bf44c9..ebd6767d8e88 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,7 +18,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -169,7 +168,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init); MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") /* Maintainer: Nicolas Pitre <nico@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f5181l_fxo_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 3f02362e1632..05db2d336b08 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -19,7 +19,6 @@ #include <linux/i2c.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -181,7 +180,7 @@ subsys_initcall(rd88f5181l_ge_pci_init); MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f5181l_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 27fd38e658bd..e47fa0578ae3 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -9,7 +9,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/ata_platform.h> #include <linux/i2c.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -306,7 +305,7 @@ static void __init rd88f5182_init(void) MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f5182_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index ad2eba9286ad..64317251ec00 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -122,7 +121,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init); MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6183ap_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index a34e4fac72b0..29f1526f7b70 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/serial_reg.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -358,7 +357,7 @@ static void __init tsp2_init(void) MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = tsp2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index c9831614e355..31e51f9b4b64 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -23,7 +23,6 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -323,7 +322,7 @@ static void __init qnap_ts209_init(void) MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts209_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index cc33b2222bad..0fbcc14e09d7 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -11,7 +11,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -25,7 +25,6 @@ #include <linux/i2c.h> #include <linux/serial_reg.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -312,7 +311,7 @@ static void __init qnap_ts409_init(void) MACHINE_START(TS409, "QNAP TS-409") /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts409_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 6b7b54116f30..6c75cd35c4c8 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -621,7 +621,7 @@ static void __init ts78xx_init(void) MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = ts78xx_init, .map_io = ts78xx_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 2653595f901c..b8be7d8d0cf4 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -5,7 +5,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -17,7 +17,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -173,7 +172,7 @@ subsys_initcall(wnr854t_pci_init); MACHINE_START(WNR854T, "Netgear WNR854T") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = wnr854t_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 251ef1543e53..faf81a039360 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -5,7 +5,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/input.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -261,7 +260,7 @@ subsys_initcall(wrt350n_v2_pci_init); MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = wrt350n_v2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot index 44c7117e20dd..9fa19baa7f2e 100644 --- a/arch/arm/mach-pnx4008/Makefile.boot +++ b/arch/arm/mach-pnx4008/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index 63399755f199..cdb95e726f5c 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -264,7 +264,7 @@ extern struct sys_timer pnx4008_timer; MACHINE_START(PNX4008, "Philips PNX4008") /* Maintainer: MontaVista Software Inc. */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = pnx4008_map_io, .init_irq = pnx4008_init_irq, .init_machine = pnx4008_init, diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c index f219914f5b29..d3e71d3847b4 100644 --- a/arch/arm/mach-pnx4008/gpio.c +++ b/arch/arm/mach-pnx4008/gpio.c @@ -13,14 +13,13 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ - #include <linux/types.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/io.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <mach/gpio.h> +#include <mach/gpio-pnx4008.h> /* register definitions */ #define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE) diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S index 931afebaf064..469d60d97f5c 100644 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00090000 add \rv, \rp, #0xf4000000 @ virtual add \rp, \rp, #0x40000000 @ physical diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h index 9591467eb9ec..41027dd7cf74 100644 --- a/arch/arm/mach-pnx4008/include/mach/gpio.h +++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h @@ -1,5 +1,5 @@ /* - * arch/arm/mach-pnx4008/include/mach/gpio.h + * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h * * PNX4008 GPIO driver - header file * diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h deleted file mode 100644 index 1275db61cee5..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/memory.h - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c index f40961e51914..374c138ac1ac 100644 --- a/arch/arm/mach-pnx4008/serial.c +++ b/arch/arm/mach-pnx4008/serial.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/io.h> @@ -19,8 +18,8 @@ #include <linux/serial_core.h> #include <linux/serial_reg.h> -#include <mach/gpio.h> +#include <mach/gpio-pnx4008.h> #include <mach/clock.h> #define UART_3 0 diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot index d023db3ae4ff..c77a4883a4ee 100644 --- a/arch/arm/mach-prima2/Makefile.boot +++ b/arch/arm/mach-prima2/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f71..615a4e75ceab 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S index bf75106333ff..cd97492bb075 100644 --- a/arch/arm/mach-prima2/include/mach/debug-macro.S +++ b/arch/arm/mach-prima2/include/mach/debug-macro.S @@ -9,7 +9,7 @@ #include <mach/hardware.h> #include <mach/uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual .endm diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h deleted file mode 100644 index 368cd5a0601a..000000000000 --- a/arch/arm/mach-prima2/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/memory.h - * - * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -/* - * Restrict DMA-able region to workaround silicon limitation. - * The limitation restricts buffers available for DMA to SD/MMC - * hardware to be below 256MB - */ -#define ARM_DMA_ZONE_SIZE (SZ_256M) - -#endif diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff7..7af254d046ba 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index 9cda2057bcfb..66c6387e5a04 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -13,7 +13,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/memory.h> #define L2X0_ADDR_FILTERING_START 0xC00 #define L2X0_ADDR_FILTERING_END 0xC04 @@ -41,9 +40,9 @@ static int __init sirfsoc_of_l2x_init(void) /* * set the physical memory windows L2 cache will cover */ - writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024, + writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024, sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); - writel_relaxed(PLAT_PHYS_OFFSET | 0x1, + writel_relaxed(PHYS_OFFSET | 0x1, sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); writel_relaxed(0, diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index f57124bdd143..ee33c3d458f5 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -31,11 +31,12 @@ static const char *prima2cb_dt_match[] __initdata = { MACHINE_START(PRIMA2_EVB, "prima2cb") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_early = sirfsoc_of_clk_init, .map_io = sirfsoc_map_lluart, .init_irq = sirfsoc_of_irq_init, .timer = &sirfsoc_timer, + .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .dt_compat = prima2cb_dt_match, MACHINE_END diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d4..492cfa8d2610 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88a..ed7ec48d11da 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot index 1ead67178eca..2c1ae92f2106 100644 --- a/arch/arm/mach-pxa/Makefile.boot +++ b/arch/arm/mach-pxa/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0xa0008000 + zreladdr-y += 0xa0008000 diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index ef3e8b1e06c1..7765d677adbb 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -828,5 +828,5 @@ MACHINE_START(BALLOON3, "Balloon3") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = balloon3_init, - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, MACHINE_END diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 648b0ab2bf77..4efc16d39c79 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -148,7 +148,7 @@ static void __init capc7117_init(void) MACHINE_START(CAPC7117, "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index 93f59f877fc6..be751470d37b 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -11,7 +11,6 @@ #include <linux/platform_device.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand-gpio.h> diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 13cf518bbbf8..349896c53abd 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -513,7 +513,7 @@ static void __init cmx2xx_map_io(void) #endif MACHINE_START(ARMCORE, "Compulab CM-X2XX") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = cmx2xx_map_io, .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b6a51340270b..d2da301619f0 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -839,8 +839,8 @@ static void __init cm_x300_init(void) cm_x300_init_bl(); } -static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init cm_x300_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { /* Make sure that mi->bank[0].start = PHYS_ADDR */ for (; tags->hdr.size; tags = tag_next(tags)) @@ -852,7 +852,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, } MACHINE_START(CM_X300, "CM-X300 module") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 870920934ecf..7db66465716f 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -306,7 +306,7 @@ static void __init colibri_pxa270_income_init(void) } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") - .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = colibri_pxa270_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, @@ -315,7 +315,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") MACHINE_END MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .init_machine = colibri_pxa270_income_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 60a6781e7a8e..c825e8bf2db1 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -183,7 +183,7 @@ void __init colibri_pxa300_init(void) } MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") - .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = colibri_pxa300_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index d2c6631915d4..692e1ffc5586 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -253,7 +253,7 @@ void __init colibri_pxa320_init(void) } MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") - .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 185a37cad254..3e9483b06053 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -705,8 +705,8 @@ static void __init corgi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_corgi(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init fixup_corgi(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks=1; diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index fe812eafb1f1..5e2cf39e9e4c 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -272,7 +272,7 @@ static void __init csb726_init(void) } MACHINE_START(CSB726, "Cogent CSB726") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 2e37ea52b372..94acc0b01dd6 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1299,7 +1299,7 @@ static void __init em_x270_init(void) } MACHINE_START(EM_X270, "Compulab EM-X270") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, @@ -1308,7 +1308,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") MACHINE_END MACHINE_START(EXEDA, "Compulab eXeda") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index b4599ec9d619..8e697dd8accd 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -41,8 +41,7 @@ #include "clock.h" /* Only e800 has 128MB RAM */ -void __init eseries_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { mi->nr_banks=1; mi->bank[0].start = 0xa0000000; @@ -189,7 +188,7 @@ static void __init e330_init(void) MACHINE_START(E330, "Toshiba e330") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -239,7 +238,7 @@ static void __init e350_init(void) MACHINE_START(E350, "Toshiba e350") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -362,7 +361,7 @@ static void __init e400_init(void) MACHINE_START(E400, "Toshiba e400") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -551,7 +550,7 @@ static void __init e740_init(void) MACHINE_START(E740, "Toshiba e740") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -743,7 +742,7 @@ static void __init e750_init(void) MACHINE_START(E750, "Toshiba e750") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -948,7 +947,7 @@ static void __init e800_init(void) MACHINE_START(E800, "Toshiba e800") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h index 5930f5e2a123..be921965e91a 100644 --- a/arch/arm/mach-pxa/eseries.h +++ b/arch/arm/mach-pxa/eseries.h @@ -1,5 +1,4 @@ -void __init eseries_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi); +void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi); extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info; extern struct pxaficp_platform_data e7xx_ficp_platform_data; diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index b73eadb9f5dc..8308eee5a924 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -797,7 +797,7 @@ static void __init a780_init(void) } MACHINE_START(EZX_A780, "Motorola EZX A780") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -863,7 +863,7 @@ static void __init e680_init(void) } MACHINE_START(EZX_E680, "Motorola EZX E680") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -929,7 +929,7 @@ static void __init a1200_init(void) } MACHINE_START(EZX_A1200, "Motorola EZX A1200") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -1120,7 +1120,7 @@ static void __init a910_init(void) } MACHINE_START(EZX_A910, "Motorola EZX A910") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -1186,7 +1186,7 @@ static void __init e6_init(void) } MACHINE_START(EZX_E6, "Motorola EZX E6") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -1226,7 +1226,7 @@ static void __init e2_init(void) } MACHINE_START(EZX_E2, "Motorola EZX E2") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index f5d91efc2965..5432ecb15def 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -26,7 +27,6 @@ #include <asm/mach-types.h> #include <mach/reset.h> -#include <mach/gpio.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index deaa111c91f9..9c8208ca0415 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -233,7 +233,7 @@ static void __init gumstix_init(void) } MACHINE_START(GUMSTIX, "Gumstix") - .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ + .atag_offset = 0x100, /* match u-boot bi_boot_params */ .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 0a235128914d..4b5e110640b1 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -203,7 +203,7 @@ static void __init h5000_init(void) } MACHINE_START(H5400, "HP iPAQ H5000") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index a997d0ab2872..f2c324570844 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -158,7 +158,7 @@ static void __init himalaya_init(void) MACHINE_START(HIMALAYA, "HTC Himalaya") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index c748a473a2ff..6f6368ece9bd 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -838,7 +838,7 @@ static void __init hx4700_init(void) } MACHINE_START(H4700, "HP iPAQ HX4700") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index d427429f1f34..f78d5db758da 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -191,7 +191,7 @@ static void __init icontrol_init(void) } MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S index 7d5c75125d65..70b112e8ef68 100644 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include "hardware.h" - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00100000 orr \rv, \rp, #io_p2v(0x40000000) @ virtual orr \rp, \rp, #0x40000000 @ physical diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h new file mode 100644 index 000000000000..41b4c93a96c2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h @@ -0,0 +1,133 @@ +/* + * Written by Philipp Zabel <philipp.zabel@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __MACH_PXA_GPIO_PXA_H +#define __MACH_PXA_GPIO_PXA_H + +#include <mach/irqs.h> +#include <mach/hardware.h> + +#define GPIO_REGS_VIRT io_p2v(0x40E00000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) + +/* GPIO Pin Level Registers */ +#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) +#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) +#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) +#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) + +/* GPIO Pin Direction Registers */ +#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) +#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) +#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) +#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) + +/* GPIO Pin Output Set Registers */ +#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) +#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) +#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) +#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) + +/* GPIO Pin Output Clear Registers */ +#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) +#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) +#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) +#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) + +/* GPIO Rising Edge Detect Registers */ +#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) +#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) +#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) +#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) + +/* GPIO Falling Edge Detect Registers */ +#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) +#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) +#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) +#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) + +/* GPIO Edge Detect Status Registers */ +#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) +#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) +#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) +#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) + +/* GPIO Alternate Function Select Registers */ +#define GAFR0_L GPIO_REG(0x0054) +#define GAFR0_U GPIO_REG(0x0058) +#define GAFR1_L GPIO_REG(0x005C) +#define GAFR1_U GPIO_REG(0x0060) +#define GAFR2_L GPIO_REG(0x0064) +#define GAFR2_U GPIO_REG(0x0068) +#define GAFR3_L GPIO_REG(0x006C) +#define GAFR3_U GPIO_REG(0x0070) + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) +#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) +#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) +#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) +#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) + + +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +#ifdef CONFIG_CPU_PXA26x +/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(unsigned gpio) +{ + return cpu_is_pxa25x() && gpio > 85; +} +#else +static inline int __gpio_is_inverted(unsigned gpio) { return 0; } +#endif + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(unsigned gpio) +{ + if (cpu_is_pxa27x() || cpu_is_pxa25x()) { + int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; + int dir = GPDR(gpio) & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + return af != 1 || dir == 0; + else + return af != 0 || dir != 0; + } else + return GPDR(gpio) & GPIO_bit(gpio); +} + +#include <plat/gpio-pxa.h> +#endif /* __MACH_PXA_GPIO_PXA_H */ diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index c4639502efca..004cade7bb13 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -24,84 +24,10 @@ #ifndef __ASM_ARCH_PXA_GPIO_H #define __ASM_ARCH_PXA_GPIO_H -#include <mach/irqs.h> -#include <mach/hardware.h> #include <asm-generic/gpio.h> +/* The defines for the driver are needed for the accelerated accessors */ +#include "gpio-pxa.h" -#define GPIO_REGS_VIRT io_p2v(0x40E00000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -/* GPIO Pin Level Registers */ -#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) -#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) -#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) -#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) - -/* GPIO Pin Direction Registers */ -#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) -#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) -#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) -#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) - -/* GPIO Pin Output Set Registers */ -#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) -#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) -#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) -#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) - -/* GPIO Pin Output Clear Registers */ -#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) -#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) -#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) -#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) - -/* GPIO Rising Edge Detect Registers */ -#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) -#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) -#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) -#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) - -/* GPIO Falling Edge Detect Registers */ -#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) -#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) -#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) -#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) - -/* GPIO Edge Detect Status Registers */ -#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) -#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) -#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) -#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) - -/* GPIO Alternate Function Select Registers */ -#define GAFR0_L GPIO_REG(0x0054) -#define GAFR0_U GPIO_REG(0x0058) -#define GAFR1_L GPIO_REG(0x005C) -#define GAFR1_U GPIO_REG(0x0060) -#define GAFR2_L GPIO_REG(0x0064) -#define GAFR2_U GPIO_REG(0x0068) -#define GAFR3_L GPIO_REG(0x006C) -#define GAFR3_U GPIO_REG(0x0070) - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) -#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) -#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) -#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) -#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) - - -#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) static inline int irq_to_gpio(unsigned int irq) @@ -118,37 +44,5 @@ static inline int irq_to_gpio(unsigned int irq) return -1; } -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static inline int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -static inline int __gpio_is_inverted(unsigned gpio) { return 0; } -#endif - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static inline int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } else - return GPDR(gpio) & GPIO_bit(gpio); -} - #include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index 2a5726c15e0e..b6238cbd8aea 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_LITTLETON_H #define __ASM_ARCH_LITTLETON_H -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #define LITTLETON_ETH_PHYS 0x30000000 diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h deleted file mode 100644 index d05a59727d66..000000000000 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/memory.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xa0000000) - -#endif diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index b09e848eb6c6..8d9200f92268 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -19,9 +18,11 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/exception.h> + #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 8f97e15e86e5..0037e57e0cec 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -437,7 +437,7 @@ static void __init littleton_init(void) } MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index c171d6ebee49..64540d908958 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> @@ -39,7 +39,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/gpio.h> #include <mach/lpd270.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -499,7 +498,7 @@ static void __init lpd270_map_io(void) MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") /* Maintainer: Peter Barada */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = lpd270_map_io, .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a8c696bfc132..c48ce6da9184 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -42,7 +43,6 @@ #include <asm/hardware/sa1111.h> #include <mach/pxa25x.h> -#include <mach/gpio.h> #include <mach/audio.h> #include <mach/lubbock.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 5fe5bcd7c0a1..4b796c37af3e 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -753,7 +753,7 @@ static void __init magician_init(void) MACHINE_START(MAGICIAN, "HTC Magician") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 4622eb78ef25..0567d3965fda 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> @@ -43,7 +43,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/gpio.h> #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -616,7 +615,7 @@ static void __init mainstone_map_io(void) MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ - .boot_params = 0xa0000100, /* BLOB boot parameter setting */ + .atag_offset = 0x100, /* BLOB boot parameter setting */ .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b27544bcafcb..43a5f6861ca3 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -12,15 +12,15 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/syscore_ops.h> -#include <mach/gpio.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> +#include <mach/gpio-pxa.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 64810f908e5b..b938fc2c316a 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -751,7 +751,7 @@ static void mioa701_machine_exit(void) } MACHINE_START(MIOA701, "MIO A701") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index fb408861dbcf..4af5d513c380 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -92,7 +92,7 @@ static void __init mp900c_init(void) /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */ MACHINE_START(NEC_MP900, "MobilePro900/C") - .boot_params = 0xa0220100, + .atag_offset = 0x220100, .timer = &pxa_timer, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 6b77365ed938..3d4a2819cae1 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -342,7 +342,7 @@ static void __init palmld_init(void) } MACHINE_START(PALMLD, "Palm LifeDrive") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = palmld_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 9bd3e47486fb..99d6bcf1f974 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -202,7 +202,7 @@ static void __init palmt5_init(void) } MACHINE_START(PALMT5, "Palm Tungsten|T5") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 6ad4a6c7bc96..6ec7caefb37c 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -537,7 +537,7 @@ static void __init palmtc_init(void) }; MACHINE_START(PALMTC, "Palm Tungsten|C") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 664232f3e62c..9376da06404c 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -356,7 +356,7 @@ static void __init palmte2_init(void) } MACHINE_START(PALMTE2, "Palm Tungsten|E2") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index bb27d4b688d8..7346fbfa8101 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -440,7 +440,7 @@ static void __init centro_init(void) } MACHINE_START(TREO680, "Palm Treo 680") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, @@ -450,7 +450,7 @@ MACHINE_START(TREO680, "Palm Treo 680") MACHINE_END MACHINE_START(CENTRO, "Palm Centro 685") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index fc4285589c1f..2b9e76fc2c90 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -364,7 +364,7 @@ static void __init palmtx_init(void) } MACHINE_START(PALMTX, "Palm T|X") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = palmtx_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index e61c1cc05519..68e18baf8e07 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -399,7 +399,7 @@ static void __init palmz72_init(void) } MACHINE_START(PALMZ72, "Palm Zire72") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index ffa65dfb8c6f..0b825a353537 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -258,7 +258,7 @@ static void __init pcm027_map_io(void) MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") /* Maintainer: Pengutronix */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pcm027_map_io, .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6d5b7e062124..9a9c539f6c01 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -19,7 +19,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -28,7 +28,6 @@ #include <media/soc_camera.h> -#include <asm/gpio.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index a113ea9ab4ab..948ce3e729fa 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -454,8 +454,8 @@ static void __init poodle_init(void) poodle_init_spi(); } -static void __init fixup_poodle(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init fixup_poodle(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks=1; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9c434d21a271..8746e1090b6e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -23,12 +24,12 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/pm.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9d2400b5f503..2bb5cf8ba6ec 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,13 +21,13 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/suspend.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/pxa27x.h> #include <mach/reset.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index b5cd9e5aba31..f940a1345531 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -12,7 +12,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -26,7 +25,7 @@ #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 0ee166b61f81..51371b39d2a3 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,7 +20,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/pxa930.h> #include <mach/reset.h> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index bbcd90562ebe..6810cddec927 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -1086,7 +1086,7 @@ static void __init raumfeld_speaker_init(void) #ifdef CONFIG_MACH_RAUMFELD_RC MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_controller_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, @@ -1097,7 +1097,7 @@ MACHINE_END #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_connector_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, @@ -1108,7 +1108,7 @@ MACHINE_END #ifdef CONFIG_MACH_RAUMFELD_SPEAKER MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_speaker_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index df4356e8acae..fc2c1e05af9c 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -540,7 +540,7 @@ static struct mtd_partition saar_onenand_partitions[] = { }, { .name = "filesystem", .offset = MTDPART_OFS_APPEND, - .size = SZ_48M, + .size = SZ_32M + SZ_16M, .mask_flags = 0, } }; @@ -596,7 +596,7 @@ static void __init saar_init(void) MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index ebd6379c4969..3c988b6f718f 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -9,12 +9,13 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include <mach/mfp.h> #include <mach/mfp-pxa930.h> -#include <mach/gpio.h> #include "generic.h" @@ -103,7 +103,7 @@ static void __init saarb_init(void) } MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = SAARB_NR_IRQS, .init_irq = pxa95x_init_irq, diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 438c7b5e451f..d8dec9113aad 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -970,8 +970,8 @@ static void __init spitz_init(void) spitz_i2c_init(); } -static void __init spitz_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init spitz_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks = 1; diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 3f8d0af9e2f7..4c9a48bef569 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1004,7 +1004,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = imote2_init, - .boot_params = 0xA0000100, + .atag_offset = 0x100, MACHINE_END #endif @@ -1016,6 +1016,6 @@ MACHINE_START(STARGATE2, "Stargate 2") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = stargate2_init, - .boot_params = 0xA0000100, + .atag_offset = 0x100, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 32fb58e01b10..ad47bb98f30d 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -489,7 +489,7 @@ static void __init tavorevb_init(void) MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index fd5a8eae0a87..fd569167302a 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -125,7 +125,7 @@ static void __init evb3_init(void) } MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = TAVOREVB3_NR_IRQS, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9f69a2682693..402b0c96613b 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -960,8 +960,8 @@ static void __init tosa_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_tosa(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init fixup_tosa(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks=1; diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index c0417508f39d..35bbf13724b9 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -554,7 +554,7 @@ static void __init trizeps4_map_io(void) MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") /* MAINTAINER("Jürgen Schindele") */ - .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, @@ -564,7 +564,7 @@ MACHINE_END MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") /* MAINTAINER("Jürgen Schindele") */ - .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index d4a3dc74e84a..242ddae332d3 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -992,7 +992,7 @@ static void __init viper_map_io(void) MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = viper_map_io, .init_irq = viper_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 5f8490ab07cb..a7539a6ed1ff 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -716,7 +716,7 @@ static void __init vpac270_init(void) } MACHINE_START(VPAC270, "Voipac PXA270") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index acc600f5e72f..70e1730ef282 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = { /* We have to state that there are HWMON devices on the I2C bus on XCEP. * Drivers for HWMON verify capabilities of the adapter when loading and - * refuse to attach if the adapter doesn't support HWMON class of devices. - * See also Documentation/i2c/porting-clients. */ + * refuse to attach if the adapter doesn't support HWMON class of devices. */ static struct i2c_pxa_platform_data xcep_i2c_platform_data = { .class = I2C_CLASS_HWMON }; @@ -180,7 +179,7 @@ static void __init xcep_init(void) } MACHINE_START(XCEP, "Iskratel XCEP") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .init_machine = xcep_init, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 6c9275a20c91..84ed72de53b5 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -686,7 +686,7 @@ static void z2_power_off(void) */ PSPR = 0x0; local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET); } #else #define z2_power_off NULL @@ -718,7 +718,7 @@ static void __init z2_init(void) } MACHINE_START(ZIPIT2, "Zipit Z2") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 99c49bcd9f70..c424e7d85ce3 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -904,7 +904,7 @@ static void __init zeus_map_io(void) MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = zeus_map_io, .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 15ec66b3471a..31d496891891 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -422,7 +422,7 @@ static void __init zylonite_init(void) } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot index d97e003d3df4..d2c3d788f688 100644 --- a/arch/arm/mach-realview/Makefile.boot +++ b/arch/arm/mach-realview/Makefile.boot @@ -1,9 +1,9 @@ ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) - zreladdr-y := 0x70008000 + zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70800000 else - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 endif diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 5c23450d2d1d..d5ed5d4f77d6 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -517,8 +517,7 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Setup the memory banks. */ -void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, - struct meminfo *meminfo) +void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo) { /* * Most RealView platforms have 512MB contiguous RAM at 0x70000000. diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 5c83d1e87a03..47259c89a75e 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -63,8 +63,8 @@ extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); extern void realview_init_early(void); -extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, - char **from, struct meminfo *meminfo); +extern void realview_fixup(struct tag *tags, char **from, + struct meminfo *meminfo); extern void (*realview_reset)(char); #endif diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 002ab5d8c11c..2a15fef94730 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -70,6 +70,7 @@ #define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ #define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ +#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */ #define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 90b687cbe04e..fb4901c4ef04 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -33,7 +33,7 @@ #error "Unknown RealView platform" #endif - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rv, \rp, #0xfb000000 @ virtual base orr \rp, \rp, #0x10000000 @ physical base diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h index 94ff27678a46..40a8c178f10d 100644 --- a/arch/arm/mach-realview/include/mach/gpio.h +++ b/arch/arm/mach-realview/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a30f2e3ec178..6657ff231161 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd) */ if (realview_reset) realview_reset(mode); + dsb(); } #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 4ae943bafa92..e83c654a58d0 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -52,12 +52,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "Realview: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 7a4e3b18cb3e..026c66ad7ec2 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -463,7 +463,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index ad5671acb66a..c057540ec776 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -26,6 +26,8 @@ #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> #include <linux/io.h> #include <mach/hardware.h> @@ -204,22 +206,48 @@ static struct amba_device *amba_devs[] __initdata = { * RealView PB1176 platform devices */ static struct resource realview_pb1176_flash_resources[] = { - [0] = { + { .start = REALVIEW_PB1176_FLASH_BASE, .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }, - [1] = { +#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH + { .start = REALVIEW_PB1176_SEC_FLASH_BASE, .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }, -}; -#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH -#define PB1176_FLASH_BLOCKS 2 -#else -#define PB1176_FLASH_BLOCKS 1 #endif +}; + +static struct physmap_flash_data pb1176_rom_pdata = { + .probe_type = "map_rom", + .width = 4, + .nr_parts = 0, +}; + +static struct resource pb1176_rom_resources[] = { + /* + * This exposes the PB1176 DevChip ROM as an MTD ROM mapping. + * The reference manual states that this is actually a pseudo-ROM + * programmed in NVRAM. + */ + { + .start = REALVIEW_DC1176_ROM_BASE, + .end = REALVIEW_DC1176_ROM_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device pb1176_rom_device = { + .name = "physmap-flash", + .id = -1, + .num_resources = ARRAY_SIZE(pb1176_rom_resources), + .resource = pb1176_rom_resources, + .dev = { + .platform_data = &pb1176_rom_pdata, + }, +}; static struct resource realview_pb1176_smsc911x_resources[] = { [0] = { @@ -316,8 +344,7 @@ static void realview_pb1176_reset(char mode) __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl); } -static void realview_pb1176_fixup(struct machine_desc *mdesc, - struct tag *tags, char **from, +static void realview_pb1176_fixup(struct tag *tags, char **from, struct meminfo *meminfo) { /* @@ -338,7 +365,8 @@ static void __init realview_pb1176_init(void) #endif realview_flash_register(realview_pb1176_flash_resources, - PB1176_FLASH_BLOCKS); + ARRAY_SIZE(realview_pb1176_flash_resources)); + platform_device_register(&pb1176_rom_device); realview_eth_register(NULL, realview_pb1176_smsc911x_resources); platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); @@ -358,7 +386,7 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index b43644b3685e..671ad6d6ff00 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -360,7 +360,7 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 763e8f38c15d..cbf22df4ad5b 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -310,7 +310,7 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 363b0ab56150..63c4114afae9 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -319,8 +319,8 @@ static struct sys_timer realview_pbx_timer = { .init = realview_pbx_timer_init, }; -static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, - char **from, struct meminfo *meminfo) +static void realview_pbx_fixup(struct tag *tags, char **from, + struct meminfo *meminfo) { #ifdef CONFIG_SPARSEMEM /* @@ -335,7 +335,7 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, meminfo->bank[2].size = SZ_256M; meminfo->nr_banks = 3; #else - realview_fixup(mdesc, tags, from, meminfo); + realview_fixup(tags, from, meminfo); #endif } @@ -393,7 +393,7 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot index 9c9e7685ec7c..ae2df0d7d037 100644 --- a/arch/arm/mach-rpc/Makefile.boot +++ b/arch/arm/mach-rpc/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x18000000 diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S index 85effffdc2b2..6d28cc99b124 100644 --- a/arch/arm/mach-rpc/include/mach/debug-macro.S +++ b/arch/arm/mach-rpc/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00010000 orr \rp, \rp, #0x00000fe0 orr \rv, \rp, #0xe0000000 @ virtual diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index dde6b3c0e299..050d63c74cc1 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -36,7 +36,7 @@ #define EASI_SIZE 0x08000000 /* EASI I/O */ #define EASI_START 0x08000000 -#define EASI_BASE 0xe5000000 +#define EASI_BASE IOMEM(0xe5000000) #define IO_START 0x03000000 /* I/O */ #define IO_SIZE 0x01000000 @@ -51,21 +51,20 @@ /* * IO Addresses */ -#define VIDC_BASE IOMEM(0xe0400000) -#define EXPMASK_BASE 0xe0360000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define PCIO_BASE IOMEM(0xe0010000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) +#define ECARD_EASI_BASE (EASI_BASE) +#define VIDC_BASE (IO_BASE + 0x00400000) +#define EXPMASK_BASE (IO_BASE + 0x00360000) +#define ECARD_IOC4_BASE (IO_BASE + 0x00270000) +#define ECARD_IOC_BASE (IO_BASE + 0x00240000) +#define IOMD_BASE (IO_BASE + 0x00200000) +#define IOC_BASE (IO_BASE + 0x00200000) +#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000) +#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000) +#define PCIO_BASE (IO_BASE + 0x00010000) +#define ECARD_MEMC_BASE (IO_BASE + 0x00000000) #define vidc_writel(val) __raw_writel(val, VIDC_BASE) -#define IO_EC_EASI_BASE 0x81400000 -#define IO_EC_IOC4_BASE 0x8009c000 -#define IO_EC_IOC_BASE 0x80090000 -#define IO_EC_MEMC8_BASE 0x8000ac00 -#define IO_EC_MEMC_BASE 0x80000000 - #define NETSLOT_BASE 0x0302b000 #define NETSLOT_SIZE 0x00001000 diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h index 20da7f486e51..695f4ed2e11b 100644 --- a/arch/arm/mach-rpc/include/mach/io.h +++ b/arch/arm/mach-rpc/include/mach/io.h @@ -15,195 +15,18 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_LIMIT 0xffff /* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions. - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__deprecated __ioaddr(unsigned int port) -{ - void __iomem *ret; - if (__PORT_PCIO(port)) - ret = PCIO_BASE; - else - ret = IO_BASE; - return ret + (port << 2); -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions + * We need PC style IO addressing for: + * - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7) + * - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a) + * - 8250 serial (only for compile) * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. + * These peripherals are found in an area of MMIO which looks very much + * like an ISA bus, but with registers at the low byte of each word. */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) - -/* the following macro is deprecated */ -#define ioaddr(port) ((unsigned long)__ioaddr((port))) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) +#define __io(a) (PCIO_BASE + ((a) << 2)) /* * 1:1 mapping for ioremapped regions. diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 580b3c73d2c7..8559598ab767 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -74,7 +74,7 @@ static struct map_desc rpc_io_desc[] __initdata = { .length = IO_SIZE , .type = MT_DEVICE }, { /* EASI space */ - .virtual = EASI_BASE, + .virtual = (unsigned long)EASI_BASE, .pfn = __phys_to_pfn(EASI_START), .length = EASI_SIZE, .type = MT_DEVICE @@ -218,7 +218,7 @@ extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") /* Maintainer: Russell King */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .reserve_lp0 = 1, .reserve_lp1 = 1, .map_io = rpc_map_io, diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h deleted file mode 100644 index 3f33670dd012..000000000000 --- a/arch/arm/mach-s3c2400/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c2400/include/mach/memory.h - * from arch/arm/mach-rpc/include/mach/memory.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x0C000000) - -#endif diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c2410/Makefile.boot index 58c1dd7f8e1d..4457605ba04a 100644 --- a/arch/arm/mach-s3c2410/Makefile.boot +++ b/arch/arm/mach-s3c2410/Makefile.boot @@ -1,7 +1,7 @@ ifeq ($(CONFIG_PM_H1940),y) - zreladdr-y := 0x30108000 + zreladdr-y += 0x30108000 params_phys-y := 0x30100100 else - zreladdr-y := 0x30008000 + zreladdr-y += 0x30008000 params_phys-y := 0x30000100 endif diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 5882deaa56be..4135de87d1f7 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -19,7 +19,7 @@ #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C24XX_PA_UART ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index f7f6b07df30e..6fac70f3484e 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -11,11 +11,6 @@ * published by the Free Software Foundation. */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* some boards require extra gpio capacity to support external * devices that need GPIO. */ @@ -28,7 +23,6 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #endif -#include <asm-generic/gpio.h> #include <mach/gpio-nrs.h> #include <mach/gpio-fns.h> diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index 97e42bfce81e..fc897d3a056c 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H -#include <mach/gpio.h> +#include <asm/gpio.h> #define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h index 9813dbf2ae4f..118749f37c4c 100644 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ b/arch/arm/mach-s3c2410/include/mach/io.h @@ -199,8 +199,6 @@ DECLARE_IO(int,l,"") #define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) #define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) #define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) #define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) #define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h deleted file mode 100644 index f92b97b89c0c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ /dev/null @@ -1,16 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/memory.h - * from arch/arm/mach-rpc/include/mach/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x30000000) - -#endif diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index dabc141243f3..79838942b0ac 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -236,7 +236,7 @@ static void __init amlm5900_init(void) } MACHINE_START(AML_M5900, "AML_M5900") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = amlm5900_map_io, .init_irq = s3c24xx_init_irq, .init_machine = amlm5900_init, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1e2d536adda9..a20ae1ad4062 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -657,7 +657,7 @@ static void __init bast_init(void) MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, .init_machine = bast_init, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2a2fa0620133..556c535829f0 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -744,7 +744,7 @@ static void __init h1940_init(void) MACHINE_START(H1940, "IPAQ-H1940") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, .init_irq = h1940_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 079dcaa602d3..1dc3e3234417 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -586,7 +586,7 @@ MACHINE_START(N30, "Acer-N30") /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = s3c24xx_init_irq, @@ -596,7 +596,7 @@ MACHINE_END MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 0aa16cd5acbc..f03f3fd9cec9 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -116,7 +116,7 @@ static void __init otom11_init(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index f44f77531b1e..367d376deb96 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -344,7 +344,7 @@ static void __init qt2410_machine_init(void) } MACHINE_START(QT2410, "QT2410") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = qt2410_map_io, .init_irq = s3c24xx_init_irq, .init_machine = qt2410_machine_init, diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index e17f03387aba..99c9dfdb71c7 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -111,7 +111,7 @@ static void __init smdk2410_init(void) MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ /* Maintainer: Jonas Dietsche */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = smdk2410_map_io, .init_irq = s3c24xx_init_irq, .init_machine = smdk2410_init, diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index 43c2b831b9e8..e0d0b6fb2800 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -146,7 +146,7 @@ static void __init tct_hammer_init(void) } MACHINE_START(TCT_HAMMER, "TCT_HAMMER") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = tct_hammer_map_io, .init_irq = s3c24xx_init_irq, .init_machine = tct_hammer_init, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 6ccce5a761b4..df47e8e90065 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -400,7 +400,7 @@ static void __init vr1000_init(void) MACHINE_START(VR1000, "Thorcom-VR1000") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index f1d3bd8f6f17..343a540d86a9 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -170,7 +170,9 @@ int __init s3c2410_init(void) { printk("S3C2410: Initialising architecture\n"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); return sysdev_register(&s3c2410_sysdev); diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 5eeb47580b0c..286ef1738c61 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -655,7 +655,7 @@ static void __init jive_machine_init(void) MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = jive_map_io, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 834cfb61bcfe..f1eec1b54932 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -92,8 +92,7 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_usbgadget, }; -static void __init smdk2413_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, +static void __init smdk2413_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { @@ -128,7 +127,7 @@ static void __init smdk2413_machine_init(void) MACHINE_START(S3C2413, "S3C2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = smdk2413_fixup, .init_irq = s3c24xx_init_irq, @@ -139,7 +138,7 @@ MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = smdk2413_fixup, .init_irq = s3c24xx_init_irq, @@ -150,7 +149,7 @@ MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = smdk2413_fixup, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 83544ebe20ac..1bbb1ef5f4ff 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -129,9 +129,8 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_nand, }; -static void __init vstms_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init vstms_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { mi->nr_banks=1; @@ -156,7 +155,7 @@ static void __init vstms_init(void) } MACHINE_START(VSTMS, "VSTMS") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = vstms_fixup, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index ef0958d3e5c6..57a1e01e4e50 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -245,7 +245,9 @@ int __init s3c2412_init(void) { printk("S3C2412: Initialising architecture\n"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2412_pm_syscore_ops); +#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); return sysdev_register(&s3c2412_sysdev); diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index ac27ebb31c9b..a9eee531ca76 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -245,7 +245,7 @@ static void __init smdk2416_machine_init(void) MACHINE_START(SMDK2416, "SMDK2416") /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2416_map_io, diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 494ce913dc95..20b3fdfb3051 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -97,7 +97,9 @@ int __init s3c2416_init(void) s3c_fb_setname("s3c2443-fb"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2416_pm_syscore_ops); +#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); return sysdev_register(&s3c2416_sysdev); diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index d7086788b1ff..74f92fc3fd04 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -498,7 +498,7 @@ static void __init anubis_init(void) MACHINE_START(ANUBIS, "Simtec-Anubis") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 6c98b789b8c6..38887ee0c784 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -233,7 +233,7 @@ static void __init at2440evb_init(void) MACHINE_START(AT2440EVB, "AT2440EVB") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index c10ddf4ed7f1..de1e0ff46cec 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -595,7 +595,7 @@ static void __init gta02_machine_init(void) MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = gta02_map_io, .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index fc2dc0b3d4fe..91fe0b4c95f1 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -676,7 +676,7 @@ static void __init mini2440_init(void) MACHINE_START(MINI2440, "MINI2440") /* Maintainer: Michel Pollet <buserror@gmail.com> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 37dd306fb7dc..61c0bf148165 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -151,7 +151,7 @@ static void __init nexcoder_init(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index d88536393310..dc142ebf8cba 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -447,7 +447,7 @@ static void __init osiris_init(void) MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = osiris_map_io, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 27ea95096fe1..684dbb3567f5 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -825,7 +825,7 @@ static void __init rx1950_reserve(void) MACHINE_START(RX1950, "HP iPAQ RX1950") /* Maintainers: Vasily Khoruzhick */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 1472b1a5b2fb..e19499c2f909 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -218,7 +218,7 @@ static void __init rx3715_init_machine(void) MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, .init_irq = rx3715_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index eedfe0f11643..36eeb4197a84 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -175,7 +175,7 @@ static void __init smdk2440_machine_init(void) MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2440_map_io, diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index ce99ff72838d..2270d3360216 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -55,7 +55,9 @@ int __init s3c2440_init(void) /* register suspend/resume handlers */ +#ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif register_syscore_ops(&s3c244x_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 9ad99f8016a1..6f2b65e6e068 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -169,7 +169,9 @@ int __init s3c2442_init(void) { printk("S3C2442: Initialising architecture\n"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif register_syscore_ops(&s3c244x_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176675b9..38058af48972 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index 514275e43ca0..bec107e00441 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -139,7 +139,7 @@ static void __init smdk2443_machine_init(void) MACHINE_START(SMDK2443, "SMDK2443") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2443_map_io, diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot index ba41fdc0a586..c642333af3ed 100644 --- a/arch/arm/mach-s3c64xx/Makefile.boot +++ b/arch/arm/mach-s3c64xx/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x50008000 + zreladdr-y += 0x50008000 params_phys-y := 0x50000100 diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 374e45e566b8..8dc05763a7eb 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/map.h> @@ -145,6 +146,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); + init_consistent_dma_size(SZ_8M); idcode = __raw_readl(S3C_VA_SYS + 0x118); if (!idcode) { diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c index f797f748b999..c681b99eda08 100644 --- a/arch/arm/mach-s3c64xx/dev-uart.c +++ b/arch/arm/mach-s3c64xx/dev-uart.c @@ -37,21 +37,10 @@ static struct resource s3c64xx_uart0_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX0, - .end = IRQ_S3CUART_RX0, + .start = IRQ_UART0, + .end = IRQ_UART0, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = IRQ_S3CUART_TX0, - .end = IRQ_S3CUART_TX0, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR0, - .end = IRQ_S3CUART_ERR0, - .flags = IORESOURCE_IRQ, - } }; static struct resource s3c64xx_uart1_resource[] = { @@ -61,19 +50,8 @@ static struct resource s3c64xx_uart1_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX1, - .end = IRQ_S3CUART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX1, - .end = IRQ_S3CUART_TX1, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR1, - .end = IRQ_S3CUART_ERR1, + .start = IRQ_UART1, + .end = IRQ_UART1, .flags = IORESOURCE_IRQ, }, }; @@ -85,19 +63,8 @@ static struct resource s3c6xx_uart2_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX2, - .end = IRQ_S3CUART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX2, - .end = IRQ_S3CUART_TX2, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR2, - .end = IRQ_S3CUART_ERR2, + .start = IRQ_UART2, + .end = IRQ_UART2, .flags = IORESOURCE_IRQ, }, }; @@ -109,19 +76,8 @@ static struct resource s3c64xx_uart3_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX3, - .end = IRQ_S3CUART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX3, - .end = IRQ_S3CUART_TX3, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR3, - .end = IRQ_S3CUART_ERR3, + .start = IRQ_UART3, + .end = IRQ_UART3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index a29e70550c70..c0c076a90f27 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index 0d46e994048a..6e34c2f6e670 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -12,11 +12,6 @@ * published by the Free Software Foundation. */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S3C64XX_GPIO_A_NR (8) #define S3C64XX_GPIO_B_NR (7) @@ -96,5 +91,3 @@ enum s3c_gpio_number { #define BOARD_NR_GPIOS 16 #define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) - -#include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index c026f67a80de..443f85b3c203 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -27,36 +27,6 @@ #define IRQ_VIC0_BASE S3C_IRQ(0) #define IRQ_VIC1_BASE S3C_IRQ(32) -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S3CUART_BASE0 (16) -#define IRQ_S3CUART_BASE1 (20) -#define IRQ_S3CUART_BASE2 (24) -#define IRQ_S3CUART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) -#define UART_IRQ_MODEM (3) - -#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) - /* VIC based IRQs */ #define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x)) diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h deleted file mode 100644 index 4760cdae1eb6..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/memory.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x50000000) - -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c index 75d9a0e49193..b07357e94958 100644 --- a/arch/arm/mach-s3c64xx/irq.c +++ b/arch/arm/mach-s3c64xx/irq.c @@ -25,29 +25,6 @@ #include <plat/irq-uart.h> #include <plat/cpu.h> -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = S3C_VA_UART0, - .base_irq = IRQ_S3CUART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = S3C_VA_UART1, - .base_irq = IRQ_S3CUART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = S3C_VA_UART2, - .base_irq = IRQ_S3CUART_BASE2, - .parent_irq = IRQ_UART2, - }, - [3] = { - .regs = S3C_VA_UART3, - .base_irq = IRQ_S3CUART_BASE3, - .parent_irq = IRQ_UART3, - }, -}; - /* setup the sources the vic should advertise resume for, even though it * is not doing the wake (set_irq_wake needs to be valid) */ #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) @@ -67,6 +44,4 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) /* add the timer sub-irqs */ s3c_init_vic_timer_irq(5, IRQ_TIMER0); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index cb8864327ac4..d164a282bfb4 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -233,7 +233,7 @@ static void __init anw6410_machine_init(void) MACHINE_START(ANW6410, "A&W6410") /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = anw6410_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index af0c2fe1ea37..4c76e08423fb 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -766,7 +766,7 @@ static void __init crag6410_machine_init(void) MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index b3d93cc8dde0..19a0887e1c1e 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -265,7 +265,7 @@ static void __init hmt_machine_init(void) MACHINE_START(HMT, "Airgoo-HMT") /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = hmt_map_io, .init_machine = hmt_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 527f49bd1b57..e91f63f7a490 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -349,7 +349,7 @@ static void __init mini6410_machine_init(void) MACHINE_START(MINI6410, "MINI6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 01c6857c5b63..c30f2e5e0d85 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -97,7 +97,7 @@ static void __init ncp_machine_init(void) MACHINE_START(NCP, "NCP") /* Maintainer: Samsung Electronics */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = ncp_map_io, .init_machine = ncp_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 95b04b1729e3..10870cb5b39e 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -329,7 +329,7 @@ static void __init real6410_machine_init(void) MACHINE_START(REAL6410, "REAL6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = real6410_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 342e8dfddf8b..cbb57ded3d95 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -146,7 +146,7 @@ static void __init smartq5_machine_init(void) MACHINE_START(SMARTQ5, "SmartQ 5") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq5_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 57963977da8e..04f914b85fdf 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -162,7 +162,7 @@ static void __init smartq7_machine_init(void) MACHINE_START(SMARTQ7, "SmartQ 7") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq7_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 3cca642f1e6d..6fd5e95f8f75 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -85,7 +85,7 @@ static void __init smdk6400_machine_init(void) MACHINE_START(SMDK6400, "SMDK6400") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6400_init_irq, .map_io = smdk6400_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ecbea92bf83b..7b66ede9fbcd 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -742,7 +703,7 @@ static void __init smdk6410_machine_init(void) MACHINE_START(SMDK6410, "SMDK6410") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = smdk6410_map_io, diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 8bad64370689..055e2858b0dd 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot index ff90aa13bd67..79ece4055b02 100644 --- a/arch/arm/mach-s5p64x0/Makefile.boot +++ b/arch/arm/mach-s5p64x0/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c index a5c00952ea35..8a938542c54d 100644 --- a/arch/arm/mach-s5p64x0/cpu.c +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -111,6 +112,7 @@ void __init s5p6440_map_io(void) iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); + init_consistent_dma_size(SZ_8M); } void __init s5p6450_map_io(void) @@ -120,6 +122,7 @@ void __init s5p6450_map_io(void) iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); + init_consistent_dma_size(SZ_8M); } /* diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index 79b04e6a6f8e..e80ba3c69814 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -15,7 +15,7 @@ #include <plat/regs-serial.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xE0000000 orr \rp, \rp, #0x00100000 ldr \rp, [\rp, #0x118 ] diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h index adb5f298ead8..06cd3c9b16ac 100644 --- a/arch/arm/mach-s5p64x0/include/mach/gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5P6440_GPIO_A_NR (6) @@ -134,6 +129,4 @@ enum s5p6450_gpio_number { #define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h deleted file mode 100644 index 365a6eb4b88f..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H __FILE__ - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index 69ed4545112b..fe7380f5c3cd 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -129,7 +129,7 @@ static int s5p64x0_alloc_gc(void) } ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 346f8dfa6f35..3b84e9bfd073 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -171,7 +171,7 @@ static void __init smdk6440_machine_init(void) MACHINE_START(SMDK6440, "SMDK6440") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P64X0_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 33f2adf8f3fe..d99d29b5558e 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -190,7 +190,7 @@ static void __init smdk6450_machine_init(void) MACHINE_START(SMDK6450, "SMDK6450") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P64X0_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5p6450_init_irq, .map_io = smdk6450_map_io, diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot index ff90aa13bd67..79ece4055b02 100644 --- a/arch/arm/mach-s5pc100/Makefile.boot +++ b/arch/arm/mach-s5pc100/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index b2ba95ddf8e0..694f75937000 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,7 +22,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 29a8a12d9b4f..5e1a924b595f 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -15,11 +15,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5PC100_GPIO_A0_NR (8) #define S5PC100_GPIO_A1_NR (5) @@ -146,6 +141,4 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h deleted file mode 100644 index bda4e79fd5fc..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/memory.h - * - * Copyright 2008 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on mach-s3c6400/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 227d8908aab6..688f45b7cd00 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -254,7 +254,7 @@ static void __init smdkc100_machine_init(void) MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot index ff90aa13bd67..79ece4055b02 100644 --- a/arch/arm/mach-s5pv210/Makefile.boot +++ b/arch/arm/mach-s5pv210/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc2..f5f8fa89679c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 79907ec78d43..91145720822c 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -20,6 +20,7 @@ #include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -119,6 +120,7 @@ static void s5pv210_sw_reset(void) void __init s5pv210_map_io(void) { iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + init_consistent_dma_size(14 << 20); /* initialise device information early */ s5pv210_default_sdhci0(); diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 169fe654a59e..79e55597ab63 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index a5a1e331f8ed..6c8b903c02e4 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ @@ -142,6 +137,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h index 7b5fcf0da0c4..2d3cfa221d5f 100644 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -14,7 +14,6 @@ #define __ASM_ARCH_MEMORY_H #define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) /* * Sparsemem support diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 509627f25111..5811a96125f0 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -678,7 +678,7 @@ MACHINE_START(AQUILA, "Aquila") /* Maintainers: Marek Szyprowski <m.szyprowski@samsung.com> Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 85c2d51a0956..061cc7e4f48c 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -897,7 +897,7 @@ static void __init goni_machine_init(void) MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 6c412c8ceccc..f7266bb0cac8 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -136,7 +136,7 @@ static void __init smdkc110_machine_init(void) MACHINE_START(SMDKC110, "SMDKC110") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 5e011fc6720d..e73e3b6d41b5 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -319,7 +319,7 @@ static void __init smdkv210_machine_init(void) MACHINE_START(SMDKV210, "SMDKV210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 925fc0dc6252..97cc066c5369 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -125,7 +125,7 @@ static void __init torbreck_machine_init(void) MACHINE_START(TORBRECK, "TORBRECK") /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 309e388a8a83..f149d278377b 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(unsigned long arg) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 41252d22e659..ed7408d3216c 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := @@ -45,7 +45,6 @@ obj-$(CONFIG_SA1100_PLEB) += pleb.o obj-$(CONFIG_SA1100_SHANNON) += shannon.o obj-$(CONFIG_SA1100_SIMPAD) += simpad.o -led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y) diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index a56ad0417cf2..5a616f6e5612 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,6 +1,7 @@ - zreladdr-y := 0xc0008000 ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) := 0xc0208000 + zreladdr-$(CONFIG_SA1111) += 0xc0208000 +else + zreladdr-y += 0xc0008000 endif params_phys-y := 0xc0000100 initrd_phys-y := 0xc0800000 diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 26257df19b63..3dd133f18415 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -301,8 +301,7 @@ static void __init get_assabet_scr(void) } static void __init -fixup_assabet(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi) { /* This must be done before any call to machine_has_neponset() */ map_sa1100_gpio_regs(); @@ -447,7 +446,7 @@ static void __init assabet_map_io(void) MACHINE_START(ASSABET, "Intel-Assabet") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b4311b0a4395..bda83e1ab078 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -302,7 +302,7 @@ static void __init badge4_map_io(void) } MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = badge4_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e21f3470eece..5fa5ae1f39e1 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -9,6 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/irq.h> -#include <asm/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c deleted file mode 100644 index 0d3829a8c2c1..000000000000 --- a/arch/arm/mach-sa1100/gpio.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/gpio.c - * - * Generic SA-1100 GPIO handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/gpio.h> -#include <mach/hardware.h> -#include "generic.h" - -static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return GPLR & GPIO_GPIO(offset); -} - -static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - GPSR = GPIO_GPIO(offset); - else - GPCR = GPIO_GPIO(offset); -} - -static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) -{ - unsigned long flags; - - local_irq_save(flags); - GPDR &= ~GPIO_GPIO(offset); - local_irq_restore(flags); - return 0; -} - -static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) -{ - unsigned long flags; - - local_irq_save(flags); - sa1100_gpio_set(chip, offset, value); - GPDR |= GPIO_GPIO(offset); - local_irq_restore(flags); - return 0; -} - -static struct gpio_chip sa1100_gpio_chip = { - .label = "gpio", - .direction_input = sa1100_direction_input, - .direction_output = sa1100_direction_output, - .set = sa1100_gpio_set, - .get = sa1100_gpio_get, - .base = 0, - .ngpio = GPIO_MAX + 1, -}; - -void __init sa1100_init_gpio(void) -{ - gpiochip_add(&sa1100_gpio_chip); -} diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 03d7376cf8a0..b30733a2b82e 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -84,7 +84,7 @@ static void __init h3100_mach_init(void) } MACHINE_START(H3100, "Compaq iPAQ H3100") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = h3100_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 965f64a836f8..6fd324d92389 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -125,7 +125,7 @@ static void __init h3600_mach_init(void) } MACHINE_START(H3600, "Compaq iPAQ H3600") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = h3600_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index db5e434a17db..30f4a551b8e5 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -195,7 +195,7 @@ static void __init hackkit_init(void) */ MACHINE_START(HACKKIT, "HackKit Cpu Board") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = hackkit_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S index 0cd0fc9635b6..530772d937ad 100644 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S @@ -12,7 +12,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? moveq \rp, #0x80000000 @ physical base address diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h index 7befc104e9a9..703631887c94 100644 --- a/arch/arm/mach-sa1100/include/mach/gpio.h +++ b/arch/arm/mach-sa1100/include/mach/gpio.h @@ -28,6 +28,8 @@ #include <asm/irq.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + static inline int gpio_get_value(unsigned gpio) { if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) @@ -51,7 +53,5 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \ (IRQ_GPIO11 - 11 + gpio)) -#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \ - (irq - IRQ_GPIO11 + 11)) #endif diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h index d8b43f3dcd2d..dfc27ff08344 100644 --- a/arch/arm/mach-sa1100/include/mach/io.h +++ b/arch/arm/mach-sa1100/include/mach/io.h @@ -10,11 +10,9 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff - /* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... + * __io() is required to be an equivalent mapping to __mem_pci() for + * SOC_COMMON to work. */ #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h index 9296c4513ce1..db28118103eb 100644 --- a/arch/arm/mach-sa1100/include/mach/simpad.h +++ b/arch/arm/mach-sa1100/include/mach/simpad.h @@ -48,32 +48,80 @@ #define GPIO_SMART_CARD GPIO_GPIO10 #define IRQ_GPIO_SMARD_CARD IRQ_GPIO10 -// CS3 Latch is write only, a shadow is necessary +/*--- ucb1x00 GPIO ---*/ +#define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1) +#define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE) +#define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1) +#define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2) +#define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3) +#define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4) +#define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5) +#define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6) +#define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7) +#define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8) +#define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9) + +/*--- CS3 Latch ---*/ +#define SIMPAD_CS3_GPIO_BASE (GPIO_MAX + 11) +#define SIMPAD_CS3_VCC_5V_EN (SIMPAD_CS3_GPIO_BASE) +#define SIMPAD_CS3_VCC_3V_EN (SIMPAD_CS3_GPIO_BASE + 1) +#define SIMPAD_CS3_EN1 (SIMPAD_CS3_GPIO_BASE + 2) +#define SIMPAD_CS3_EN0 (SIMPAD_CS3_GPIO_BASE + 3) +#define SIMPAD_CS3_DISPLAY_ON (SIMPAD_CS3_GPIO_BASE + 4) +#define SIMPAD_CS3_PCMCIA_BUFF_DIS (SIMPAD_CS3_GPIO_BASE + 5) +#define SIMPAD_CS3_MQ_RESET (SIMPAD_CS3_GPIO_BASE + 6) +#define SIMPAD_CS3_PCMCIA_RESET (SIMPAD_CS3_GPIO_BASE + 7) +#define SIMPAD_CS3_DECT_POWER_ON (SIMPAD_CS3_GPIO_BASE + 8) +#define SIMPAD_CS3_IRDA_SD (SIMPAD_CS3_GPIO_BASE + 9) +#define SIMPAD_CS3_RS232_ON (SIMPAD_CS3_GPIO_BASE + 10) +#define SIMPAD_CS3_SD_MEDIAQ (SIMPAD_CS3_GPIO_BASE + 11) +#define SIMPAD_CS3_LED2_ON (SIMPAD_CS3_GPIO_BASE + 12) +#define SIMPAD_CS3_IRDA_MODE (SIMPAD_CS3_GPIO_BASE + 13) +#define SIMPAD_CS3_ENABLE_5V (SIMPAD_CS3_GPIO_BASE + 14) +#define SIMPAD_CS3_RESET_SIMCARD (SIMPAD_CS3_GPIO_BASE + 15) + +#define SIMPAD_CS3_PCMCIA_BVD1 (SIMPAD_CS3_GPIO_BASE + 16) +#define SIMPAD_CS3_PCMCIA_BVD2 (SIMPAD_CS3_GPIO_BASE + 17) +#define SIMPAD_CS3_PCMCIA_VS1 (SIMPAD_CS3_GPIO_BASE + 18) +#define SIMPAD_CS3_PCMCIA_VS2 (SIMPAD_CS3_GPIO_BASE + 19) +#define SIMPAD_CS3_LOCK_IND (SIMPAD_CS3_GPIO_BASE + 20) +#define SIMPAD_CS3_CHARGING_STATE (SIMPAD_CS3_GPIO_BASE + 21) +#define SIMPAD_CS3_PCMCIA_SHORT (SIMPAD_CS3_GPIO_BASE + 22) +#define SIMPAD_CS3_GPIO_23 (SIMPAD_CS3_GPIO_BASE + 23) -#define CS3BUSTYPE unsigned volatile long #define CS3_BASE 0xf1000000 -#define VCC_5V_EN 0x0001 // For 5V PCMCIA -#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA -#define EN1 0x0004 // This is only for EPROM's -#define EN0 0x0008 // Both should be enable for 3.3V or 5V -#define DISPLAY_ON 0x0010 -#define PCMCIA_BUFF_DIS 0x0020 -#define MQ_RESET 0x0040 -#define PCMCIA_RESET 0x0080 -#define DECT_POWER_ON 0x0100 -#define IRDA_SD 0x0200 // Shutdown for powersave -#define RS232_ON 0x0400 -#define SD_MEDIAQ 0x0800 // Shutdown for powersave -#define LED2_ON 0x1000 -#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode -#define ENABLE_5V 0x4000 // Enable 5V circuit -#define RESET_SIMCARD 0x8000 - -#define RS232_ENABLE 0x0440 -#define PCMCIAMASK 0x402f - - +long simpad_get_cs3_ro(void); +long simpad_get_cs3_shadow(void); +void simpad_set_cs3_bit(int value); +void simpad_clear_cs3_bit(int value); + +#define VCC_5V_EN 0x0001 /* For 5V PCMCIA */ +#define VCC_3V_EN 0x0002 /* FOR 3.3V PCMCIA */ +#define EN1 0x0004 /* This is only for EPROM's */ +#define EN0 0x0008 /* Both should be enable for 3.3V or 5V */ +#define DISPLAY_ON 0x0010 +#define PCMCIA_BUFF_DIS 0x0020 +#define MQ_RESET 0x0040 +#define PCMCIA_RESET 0x0080 +#define DECT_POWER_ON 0x0100 +#define IRDA_SD 0x0200 /* Shutdown for powersave */ +#define RS232_ON 0x0400 +#define SD_MEDIAQ 0x0800 /* Shutdown for powersave */ +#define LED2_ON 0x1000 +#define IRDA_MODE 0x2000 /* Fast/Slow IrDA mode */ +#define ENABLE_5V 0x4000 /* Enable 5V circuit */ +#define RESET_SIMCARD 0x8000 + +#define PCMCIA_BVD1 0x01 +#define PCMCIA_BVD2 0x02 +#define PCMCIA_VS1 0x04 +#define PCMCIA_VS2 0x08 +#define LOCK_IND 0x10 +#define CHARGING_STATE 0x20 +#define PCMCIA_SHORT 0x40 + +/*--- Battery ---*/ struct simpad_battery { unsigned char ac_status; /* line connected yes/no */ unsigned char status; /* battery loading yes/no */ diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 176c066aec7e..0bb520d48ed0 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -364,7 +364,7 @@ static void __init jornada720_mach_init(void) MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = jornada720_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 7b9556b59057..5bc59d0947ba 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -61,7 +61,7 @@ static void __init lart_map_io(void) } MACHINE_START(LART, "LART") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = lart_map_io, .init_irq = sa1100_init_irq, .init_machine = lart_init, diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c deleted file mode 100644 index d50f4eeaa12e..000000000000 --- a/arch/arm/mach-sa1100/leds-simpad.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/leds-simpad.c - * - * Author: Juergen Messerer <juergen.messerer@siemens.ch> - */ -#include <linux/init.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/system.h> -#include <mach/simpad.h> - -#include "leds.h" - - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 - -static unsigned int led_state; -static unsigned int hw_led_state; - -#define LED_GREEN (1) -#define LED_MASK (1) - -extern void set_cs3_bit(int value); -extern void clear_cs3_bit(int value); - -void simpad_leds_event(led_event_t evt) -{ - switch (evt) - { - case led_start: - hw_led_state = LED_GREEN; - led_state = LED_STATE_ENABLED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = LED_GREEN; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = LED_GREEN; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state ^= LED_GREEN; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - break; - - case led_idle_end: - break; -#endif - - case led_halted: - break; - - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= LED_GREEN; - break; - - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~LED_GREEN; - break; - - case led_amber_on: - break; - - case led_amber_off: - break; - - case led_red_on: - break; - - case led_red_off: - break; - - default: - break; - } - - if (led_state & LED_STATE_ENABLED) - set_cs3_bit(LED2_ON); - else - clear_cs3_bit(LED2_ON); -} - diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c index bbfe197fb4d6..5fe71a0f1053 100644 --- a/arch/arm/mach-sa1100/leds.c +++ b/arch/arm/mach-sa1100/leds.c @@ -42,8 +42,6 @@ sa1100_leds_init(void) leds_event = adsbitsy_leds_event; if (machine_is_pt_system3()) leds_event = system3_leds_event; - if (machine_is_simpad()) - leds_event = simpad_leds_event; /* what about machine registry? including led, apm... -zecke */ leds_event(led_start); return 0; diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h index 68cc9f773d6d..776b6020f550 100644 --- a/arch/arm/mach-sa1100/leds.h +++ b/arch/arm/mach-sa1100/leds.h @@ -11,4 +11,3 @@ extern void pfs168_leds_event(led_event_t evt); extern void graphicsmaster_leds_event(led_event_t evt); extern void adsbitsy_leds_event(led_event_t evt); extern void system3_leds_event(led_event_t evt); -extern void simpad_leds_event(led_event_t evt); diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 72087f0658b7..032f3881d145 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -111,7 +111,7 @@ static void __init nanoengine_init(void) } MACHINE_START(NANOENGINE, "BSE nanoEngine") - .boot_params = 0xc0000000, + .atag_offset = 0x100, .map_io = nanoengine_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 7917b2405579..1cccbf5b9e9a 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -82,7 +82,7 @@ static void __init shannon_map_io(void) } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = shannon_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index cfb76077bd25..4790f3f3d008 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -13,6 +13,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> +#include <linux/gpio.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -28,35 +29,92 @@ #include <linux/serial_core.h> #include <linux/ioport.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <linux/i2c-gpio.h> #include "generic.h" -long cs3_shadow; +/* + * CS3 support + */ + +static long cs3_shadow; +static spinlock_t cs3_lock; +static struct gpio_chip cs3_gpio; + +long simpad_get_cs3_ro(void) +{ + return readl(CS3_BASE); +} +EXPORT_SYMBOL(simpad_get_cs3_ro); -long get_cs3_shadow(void) +long simpad_get_cs3_shadow(void) { return cs3_shadow; } +EXPORT_SYMBOL(simpad_get_cs3_shadow); -void set_cs3(long value) +static void __simpad_write_cs3(void) { - *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow = value; + writel(cs3_shadow, CS3_BASE); } -void set_cs3_bit(int value) +void simpad_set_cs3_bit(int value) { + unsigned long flags; + + spin_lock_irqsave(&cs3_lock, flags); cs3_shadow |= value; - *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow; + __simpad_write_cs3(); + spin_unlock_irqrestore(&cs3_lock, flags); } +EXPORT_SYMBOL(simpad_set_cs3_bit); -void clear_cs3_bit(int value) +void simpad_clear_cs3_bit(int value) { + unsigned long flags; + + spin_lock_irqsave(&cs3_lock, flags); cs3_shadow &= ~value; - *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow; + __simpad_write_cs3(); + spin_unlock_irqrestore(&cs3_lock, flags); } +EXPORT_SYMBOL(simpad_clear_cs3_bit); -EXPORT_SYMBOL(set_cs3_bit); -EXPORT_SYMBOL(clear_cs3_bit); +static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset > 15) + return; + if (value) + simpad_set_cs3_bit(1 << offset); + else + simpad_clear_cs3_bit(1 << offset); +}; + +static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + if (offset > 15) + return simpad_get_cs3_ro() & (1 << (offset - 16)); + return simpad_get_cs3_shadow() & (1 << offset); +}; + +static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + if (offset > 15) + return 0; + return -EINVAL; +}; + +static int cs3_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + if (offset > 15) + return -EINVAL; + cs3_gpio_set(chip, offset, value); + return 0; +}; static struct map_desc simpad_io_desc[] __initdata = { { /* MQ200 */ @@ -64,9 +122,9 @@ static struct map_desc simpad_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x4b800000), .length = 0x00800000, .type = MT_DEVICE - }, { /* Paules CS3, write only */ - .virtual = 0xf1000000, - .pfn = __phys_to_pfn(0x18000000), + }, { /* Simpad CS3 */ + .virtual = CS3_BASE, + .pfn = __phys_to_pfn(SA1100_CS3_PHYS), .length = 0x00100000, .type = MT_DEVICE }, @@ -78,12 +136,12 @@ static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate) if (port->mapbase == (u_int)&Ser1UTCR0) { if (state) { - clear_cs3_bit(RS232_ON); - clear_cs3_bit(DECT_POWER_ON); + simpad_clear_cs3_bit(RS232_ON); + simpad_clear_cs3_bit(DECT_POWER_ON); }else { - set_cs3_bit(RS232_ON); - set_cs3_bit(DECT_POWER_ON); + simpad_set_cs3_bit(RS232_ON); + simpad_set_cs3_bit(DECT_POWER_ON); } } } @@ -132,6 +190,7 @@ static struct resource simpad_flash_resources [] = { static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; @@ -142,9 +201,10 @@ static void __init simpad_map_io(void) iotable_init(simpad_io_desc, ARRAY_SIZE(simpad_io_desc)); - set_cs3_bit (EN1 | EN0 | LED2_ON | DISPLAY_ON | RS232_ON | - ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON); - + /* Initialize CS3 */ + cs3_shadow = (EN1 | EN0 | LED2_ON | DISPLAY_ON | + RS232_ON | ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON); + __simpad_write_cs3(); /* Spinlocks not yet initialized */ sa1100_register_uart_fns(&simpad_port_fns); sa1100_register_uart(0, 3); /* serial interface */ @@ -170,13 +230,14 @@ static void __init simpad_map_io(void) static void simpad_power_off(void) { - local_irq_disable(); // was cli - set_cs3(0x800); /* only SD_MEDIAQ */ + local_irq_disable(); + cs3_shadow = SD_MEDIAQ; + __simpad_write_cs3(); /* Bypass spinlock here */ /* disable internal oscillator, float CS lines */ PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS); - /* enable wake-up on GPIO0 (Assabet...) */ - PWER = GFER = GRER = 1; + /* enable wake-up on GPIO0 */ + PWER = GFER = GRER = PWER_GPIO0; /* * set scratchpad to zero, just in case it is used as a * restart address by the bootloader. @@ -192,6 +253,91 @@ static void simpad_power_off(void) } +/* + * gpio_keys +*/ + +static struct gpio_keys_button simpad_button_table[] = { + { KEY_POWER, IRQ_GPIO_POWER_BUTTON, 1, "power button" }, +}; + +static struct gpio_keys_platform_data simpad_keys_data = { + .buttons = simpad_button_table, + .nbuttons = ARRAY_SIZE(simpad_button_table), +}; + +static struct platform_device simpad_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &simpad_keys_data, + }, +}; + +static struct gpio_keys_button simpad_polled_button_table[] = { + { KEY_PROG1, SIMPAD_UCB1X00_GPIO_PROG1, 1, "prog1 button" }, + { KEY_PROG2, SIMPAD_UCB1X00_GPIO_PROG2, 1, "prog2 button" }, + { KEY_UP, SIMPAD_UCB1X00_GPIO_UP, 1, "up button" }, + { KEY_DOWN, SIMPAD_UCB1X00_GPIO_DOWN, 1, "down button" }, + { KEY_LEFT, SIMPAD_UCB1X00_GPIO_LEFT, 1, "left button" }, + { KEY_RIGHT, SIMPAD_UCB1X00_GPIO_RIGHT, 1, "right button" }, +}; + +static struct gpio_keys_platform_data simpad_polled_keys_data = { + .buttons = simpad_polled_button_table, + .nbuttons = ARRAY_SIZE(simpad_polled_button_table), + .poll_interval = 50, +}; + +static struct platform_device simpad_polled_keys = { + .name = "gpio-keys-polled", + .dev = { + .platform_data = &simpad_polled_keys_data, + }, +}; + +/* + * GPIO LEDs + */ + +static struct gpio_led simpad_leds[] = { + { + .name = "simpad:power", + .gpio = SIMPAD_CS3_LED2_ON, + .active_low = 0, + .default_trigger = "default-on", + }, +}; + +static struct gpio_led_platform_data simpad_led_data = { + .num_leds = ARRAY_SIZE(simpad_leds), + .leds = simpad_leds, +}; + +static struct platform_device simpad_gpio_leds = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &simpad_led_data, + }, +}; + +/* + * i2c + */ +static struct i2c_gpio_platform_data simpad_i2c_data = { + .sda_pin = GPIO_GPIO21, + .scl_pin = GPIO_GPIO25, + .udelay = 10, + .timeout = HZ, +}; + +static struct platform_device simpad_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &simpad_i2c_data, + }, +}; /* * MediaQ Video Device @@ -202,7 +348,11 @@ static struct platform_device simpad_mq200fb = { }; static struct platform_device *devices[] __initdata = { - &simpad_mq200fb + &simpad_keys, + &simpad_polled_keys, + &simpad_mq200fb, + &simpad_gpio_leds, + &simpad_i2c, }; @@ -211,6 +361,19 @@ static int __init simpad_init(void) { int ret; + spin_lock_init(&cs3_lock); + + cs3_gpio.label = "simpad_cs3"; + cs3_gpio.base = SIMPAD_CS3_GPIO_BASE; + cs3_gpio.ngpio = 24; + cs3_gpio.set = cs3_gpio_set; + cs3_gpio.get = cs3_gpio_get; + cs3_gpio.direction_input = cs3_gpio_direction_input; + cs3_gpio.direction_output = cs3_gpio_direction_output; + ret = gpiochip_add(&cs3_gpio); + if (ret) + printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device"); + pm_power_off = simpad_power_off; sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, @@ -229,7 +392,7 @@ arch_initcall(simpad_init); MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = simpad_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot index 4320f8b92771..e40e24e4ca34 100644 --- a/arch/arm/mach-shark/Makefile.boot +++ b/arch/arm/mach-shark/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x08008000 + zreladdr-y += 0x08008000 diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index ac2873c8014b..feda3ca7fc95 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -152,7 +152,7 @@ static struct sys_timer shark_timer = { MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ - .boot_params = 0x08003000, + .atag_offset = 0x3000, .map_io = shark_map_io, .init_irq = shark_init_irq, .timer = &shark_timer, diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index a473f55dc71f..20eb2bf2a42b 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xe0000000 orr \rp, \rp, #0x000003f8 mov \rv, \rp diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c index c9e32de4adf9..ccd49189bbd0 100644 --- a/arch/arm/mach-shark/leds.c +++ b/arch/arm/mach-shark/leds.c @@ -36,7 +36,7 @@ static char led_state; static short hw_led_state; static short saved_state; -static DEFINE_SPINLOCK(leds_lock); +static DEFINE_RAW_SPINLOCK(leds_lock); short sequoia_read(int addr) { outw(addr,0x24); @@ -52,7 +52,7 @@ static void sequoia_leds_event(led_event_t evt) { unsigned long flags; - spin_lock_irqsave(&leds_lock, flags); + raw_spin_lock_irqsave(&leds_lock, flags); hw_led_state = sequoia_read(0x09); @@ -144,7 +144,7 @@ static void sequoia_leds_event(led_event_t evt) if (led_state & LED_STATE_ENABLED) sequoia_write(hw_led_state,0x09); - spin_unlock_irqrestore(&leds_lock, flags); + raw_spin_unlock_irqrestore(&leds_lock, flags); } static int __init leds_init(void) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 1c08ee9de86a..498efd99338d 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -1,7 +1,7 @@ __ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_MEMORY_START) + 0x8000]') - zreladdr-y := $(__ZRELADDR) + zreladdr-y += $(__ZRELADDR) # Unsupported legacy stuff # diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index ce5c2513c6ce..475342bcc95c 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -37,6 +37,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> +#include <linux/dma-mapping.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -341,6 +342,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -353,14 +355,17 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = gic_spi(83), .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = gic_spi(84), .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = gic_spi(85), .flags = IORESOURCE_IRQ, }, @@ -382,7 +387,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, @@ -396,14 +401,17 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = gic_spi(87), .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = gic_spi(88), .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = gic_spi(89), .flags = IORESOURCE_IRQ, }, @@ -446,6 +454,8 @@ static struct map_desc ag5evm_io_desc[] __initdata = { static void __init ag5evm_map_io(void) { iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh73a0_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 9e0856b2f9e9..5b7edadf4647 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -42,6 +42,8 @@ #include <linux/leds.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> +#include <linux/pm_clock.h> +#include <linux/dma-mapping.h> #include <media/sh_mobile_ceu.h> #include <media/sh_mobile_csi2.h> @@ -1170,6 +1172,8 @@ static struct map_desc ap4evb_io_desc[] __initdata = { static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); @@ -1408,10 +1412,16 @@ static void __init ap4evb_init(void) sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); + sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); + hdmi_init_pm_clock(); fsi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&lcdc1_device.dev, "hdmi"); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index ef4613b993a2..8b620bf06221 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -32,6 +32,7 @@ #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/dma-mapping.h> #include <mach/sh7367.h> #include <mach/common.h> #include <asm/mach-types.h> @@ -260,6 +261,8 @@ static struct map_desc g3evm_io_desc[] __initdata = { static void __init g3evm_map_io(void) { iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7367_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 8e3c5559f27f..7719ddc5f591 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -33,6 +33,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/gpio.h> +#include <linux/dma-mapping.h> #include <mach/sh7377.h> #include <mach/common.h> #include <asm/mach-types.h> @@ -274,6 +275,8 @@ static struct map_desc g4evm_io_desc[] __initdata = { static void __init g4evm_map_io(void) { iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7377_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index d41c01f83f15..4de92dc570b0 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -39,12 +39,13 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> +#include <linux/dma-mapping.h> #include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> @@ -641,6 +642,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -808,8 +811,11 @@ static struct usbhs_private usbhs1_private = { }, .driver_param = { .buswait_bwait = 4, + .has_otg = 1, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; @@ -1066,14 +1072,17 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, }, @@ -1117,14 +1126,17 @@ static struct resource sdhi2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, }, @@ -1377,6 +1389,8 @@ static struct map_desc mackerel_io_desc[] __initdata = { static void __init mackerel_map_io(void) { iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); @@ -1584,10 +1598,20 @@ static void __init mackerel_init(void) sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); +#endif + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device); + sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); hdmi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 6b1619a65dba..66975921e646 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = { &sh7372_fsidivb_clk, }; -enum { MSTP001, +enum { MSTP001, MSTP000, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, - MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, + MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, + MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -520,6 +521,7 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ @@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ + [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -557,8 +561,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ + [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; static struct clk_lookup lookups[] = { @@ -609,6 +617,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ @@ -629,14 +638,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -650,11 +661,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ + CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", + &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 6db2ccabc2bf..61a846bb30f2 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,7 +365,7 @@ void __init sh73a0_clock_init(void) __raw_writel(0x108, SD2CKCR); /* detect main clock parent */ - switch ((__raw_readl(CKSCR) >> 24) & 0x03) { + switch ((__raw_readl(CKSCR) >> 28) & 0x03) { case 0: main_clk.parent = &sh73a0_extal1_clk; break; diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S index cac0a7ae2084..1a1c00ca39a2 100644 --- a/arch/arm/mach-shmobile/entry-intc.S +++ b/arch/arm/mach-shmobile/entry-intc.S @@ -51,7 +51,4 @@ .macro test_for_ipi, irqnr, irqstat, base, tmp .endm - .macro test_for_ltirq, irqnr, irqstat, base, tmp - .endm - arch_irq_handler shmobile_handle_irq_intc diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 06aecb31d9c7..c0cdbf997c91 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -35,8 +35,8 @@ extern void sh7372_add_standard_devices(void); extern void sh7372_clock_init(void); extern void sh7372_pinmux_init(void); extern void sh7372_pm_init(void); -extern void sh7372_cpu_suspend(void); -extern void sh7372_cpu_resume(void); +extern void sh7372_resume_core_standby_a3sm(void); +extern int sh7372_do_idle_a3sm(unsigned long unused); extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index d791f10eeac7..8d4a416d4285 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -27,8 +27,5 @@ .macro test_for_ipi, irqnr, irqstat, base, tmp .endm - .macro test_for_ltirq, irqnr, irqstat, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 2b1bb9e43dda..7bf0890e16ba 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -18,31 +18,15 @@ #ifdef CONFIG_GPIOLIB -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned int irq) { return -ENOSYS; } +#else + +#define __ARM_GPIOLIB_COMPLEX + #endif /* CONFIG_GPIOLIB */ #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h index ad00c3c258f4..0ffbe8155c76 100644 --- a/arch/arm/mach-shmobile/include/mach/memory.h +++ b/arch/arm/mach-shmobile/include/mach/memory.h @@ -4,7 +4,4 @@ #define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START) #define MEM_SIZE UL(CONFIG_MEMORY_SIZE) -/* DMA memory at 0xf6000000 - 0xffdfffff */ -#define CONSISTENT_DMA_SIZE (158 << 20) - #endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index ce595cee86cd..84532f9629b2 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -459,6 +459,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; @@ -475,7 +479,12 @@ struct platform_device; struct sh7372_pm_domain { struct generic_pm_domain genpd; + struct dev_power_governor *gov; + void (*suspend)(void); + void (*resume)(void); unsigned int bit_shift; + bool no_debug; + bool stay_on; }; static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) @@ -487,16 +496,24 @@ static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) extern struct sh7372_pm_domain sh7372_a4lc; extern struct sh7372_pm_domain sh7372_a4mp; extern struct sh7372_pm_domain sh7372_d4; +extern struct sh7372_pm_domain sh7372_a4r; extern struct sh7372_pm_domain sh7372_a3rv; extern struct sh7372_pm_domain sh7372_a3ri; +extern struct sh7372_pm_domain sh7372_a3sp; extern struct sh7372_pm_domain sh7372_a3sg; extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd); extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, struct platform_device *pdev); +extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, + struct sh7372_pm_domain *sh7372_sd); #else #define sh7372_init_pm_domain(pd) do { } while(0) #define sh7372_add_device_to_domain(pd, pdev) do { } while(0) +#define sh7372_pm_add_subdomain(pd, sd) do { } while(0) #endif /* CONFIG_PM */ +extern void sh7372_intcs_suspend(void); +extern void sh7372_intcs_resume(void); + #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3b28743c77eb..29cdc0522d9c 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -379,7 +379,7 @@ enum { /* BBIF2 */ VPU, TSIF1, - _3DG_SGX530, + /* 3DG */ _2DDMAC, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, @@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = { /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), - INTCS_VECT(_3DG_SGX530, 0x9e0), + /* 3DG */ INTCS_VECT(_2DDMAC, 0xa00), INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), @@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ { 0, 0, MSIOF, 0, - _3DG_SGX530, 0, 0, 0 } }, + 0, 0, 0, 0 } }, { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, 0, 0, 0, 0 } }, @@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = { TMU_TUNI2, TSIF1 } }, { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, @@ -607,9 +606,16 @@ static void intcs_demux(unsigned int irq, struct irq_desc *desc) generic_handle_irq(intcs_evt2irq(evtcodeas)); } +static void __iomem *intcs_ffd2; +static void __iomem *intcs_ffd5; + void __init sh7372_init_irq(void) { - void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); + void __iomem *intevtsa; + + intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE); + intevtsa = intcs_ffd2 + 0x100; + intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE); register_intc_controller(&intca_desc); register_intc_controller(&intcs_desc); @@ -618,3 +624,46 @@ void __init sh7372_init_irq(void) irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); irq_set_chained_handler(evt2irq(0xf80), intcs_demux); } + +static unsigned short ffd2[0x200]; +static unsigned short ffd5[0x100]; + +void sh7372_intcs_suspend(void) +{ + int k; + + for (k = 0x00; k <= 0x30; k += 4) + ffd2[k] = __raw_readw(intcs_ffd2 + k); + + for (k = 0x80; k <= 0xb0; k += 4) + ffd2[k] = __raw_readb(intcs_ffd2 + k); + + for (k = 0x180; k <= 0x188; k += 4) + ffd2[k] = __raw_readb(intcs_ffd2 + k); + + for (k = 0x00; k <= 0x3c; k += 4) + ffd5[k] = __raw_readw(intcs_ffd5 + k); + + for (k = 0x80; k <= 0x9c; k += 4) + ffd5[k] = __raw_readb(intcs_ffd5 + k); +} + +void sh7372_intcs_resume(void) +{ + int k; + + for (k = 0x00; k <= 0x30; k += 4) + __raw_writew(ffd2[k], intcs_ffd2 + k); + + for (k = 0x80; k <= 0xb0; k += 4) + __raw_writeb(ffd2[k], intcs_ffd2 + k); + + for (k = 0x180; k <= 0x188; k += 4) + __raw_writeb(ffd2[k], intcs_ffd2 + k); + + for (k = 0x00; k <= 0x3c; k += 4) + __raw_writew(ffd5[k], intcs_ffd5 + k); + + for (k = 0x80; k <= 0x9c; k += 4) + __raw_writeb(ffd5[k], intcs_ffd5 + k); +} diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 66f980625a33..e4e485fa2532 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -56,6 +56,12 @@ void __init smp_init_cpus(void) unsigned int ncores = shmobile_smp_get_core_count(); unsigned int i; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 933fb411be0f..79612737c5b2 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -15,23 +15,61 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/slab.h> -#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/irq.h> +#include <linux/bitrev.h> #include <asm/system.h> #include <asm/io.h> #include <asm/tlbflush.h> +#include <asm/suspend.h> #include <mach/common.h> #include <mach/sh7372.h> -#define SMFRAM 0xe6a70000 -#define SYSTBCR 0xe6150024 -#define SBAR 0xe6180020 -#define APARMBAREA 0xe6f10020 +/* DBG */ +#define DBGREG1 0xe6100020 +#define DBGREG9 0xe6100040 +/* CPGA */ +#define SYSTBCR 0xe6150024 +#define MSTPSR0 0xe6150030 +#define MSTPSR1 0xe6150038 +#define MSTPSR2 0xe6150040 +#define MSTPSR3 0xe6150048 +#define MSTPSR4 0xe615004c +#define PLLC01STPCR 0xe61500c8 + +/* SYSC */ #define SPDCR 0xe6180008 #define SWUCR 0xe6180014 +#define SBAR 0xe6180020 +#define WUPRMSK 0xe6180028 +#define WUPSMSK 0xe618002c +#define WUPSMSK2 0xe6180048 #define PSTR 0xe6180080 +#define WUPSFAC 0xe6180098 +#define IRQCR 0xe618022c +#define IRQCR2 0xe6180238 +#define IRQCR3 0xe6180244 +#define IRQCR4 0xe6180248 +#define PDNSEL 0xe6180254 + +/* INTC */ +#define ICR1A 0xe6900000 +#define ICR2A 0xe6900004 +#define ICR3A 0xe6900008 +#define ICR4A 0xe690000c +#define INTMSK00A 0xe6900040 +#define INTMSK10A 0xe6900044 +#define INTMSK20A 0xe6900048 +#define INTMSK30A 0xe690004c + +/* MFIS */ +#define SMFRAM 0xe6a70000 + +/* AP-System Core */ +#define APARMBAREA 0xe6f10020 #define PSTR_RETRIES 100 #define PSTR_DELAY_US 10 @@ -43,6 +81,12 @@ static int pd_power_down(struct generic_pm_domain *genpd) struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); unsigned int mask = 1 << sh7372_pd->bit_shift; + if (sh7372_pd->suspend) + sh7372_pd->suspend(); + + if (sh7372_pd->stay_on) + return 0; + if (__raw_readl(PSTR) & mask) { unsigned int retry_count; @@ -55,8 +99,9 @@ static int pd_power_down(struct generic_pm_domain *genpd) } } - pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n", - mask, __raw_readl(PSTR)); + if (!sh7372_pd->no_debug) + pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n", + mask, __raw_readl(PSTR)); return 0; } @@ -68,6 +113,9 @@ static int pd_power_up(struct generic_pm_domain *genpd) unsigned int retry_count; int ret = 0; + if (sh7372_pd->stay_on) + goto out; + if (__raw_readl(PSTR) & mask) goto out; @@ -84,66 +132,48 @@ static int pd_power_up(struct generic_pm_domain *genpd) if (__raw_readl(SWUCR) & mask) ret = -EIO; + if (!sh7372_pd->no_debug) + pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n", + mask, __raw_readl(PSTR)); + out: - pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n", - mask, __raw_readl(PSTR)); + if (ret == 0 && sh7372_pd->resume) + sh7372_pd->resume(); return ret; } -static int pd_power_up_a3rv(struct generic_pm_domain *genpd) +static void sh7372_a4r_suspend(void) { - int ret = pd_power_up(genpd); - - /* force A4LC on after A3RV has been requested on */ - pm_genpd_poweron(&sh7372_a4lc.genpd); - - return ret; + sh7372_intcs_suspend(); + __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ } -static int pd_power_down_a3rv(struct generic_pm_domain *genpd) +static bool pd_active_wakeup(struct device *dev) { - int ret = pd_power_down(genpd); - - /* try to power down A4LC after A3RV is requested off */ - genpd_queue_power_off_work(&sh7372_a4lc.genpd); - - return ret; + return true; } -static int pd_power_down_a4lc(struct generic_pm_domain *genpd) +static bool sh7372_power_down_forbidden(struct dev_pm_domain *domain) { - /* only power down A4LC if A3RV is off */ - if (!(__raw_readl(PSTR) & (1 << sh7372_a3rv.bit_shift))) - return pd_power_down(genpd); - - return -EBUSY; + return false; } -static bool pd_active_wakeup(struct device *dev) -{ - return true; -} +struct dev_power_governor sh7372_always_on_gov = { + .power_down_ok = sh7372_power_down_forbidden, +}; void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) { struct generic_pm_domain *genpd = &sh7372_pd->genpd; - pm_genpd_init(genpd, NULL, false); + pm_genpd_init(genpd, sh7372_pd->gov, false); genpd->stop_device = pm_clk_suspend; genpd->start_device = pm_clk_resume; + genpd->dev_irq_safe = true; genpd->active_wakeup = pd_active_wakeup; - - if (sh7372_pd == &sh7372_a4lc) { - genpd->power_off = pd_power_down_a4lc; - genpd->power_on = pd_power_up; - } else if (sh7372_pd == &sh7372_a3rv) { - genpd->power_off = pd_power_down_a3rv; - genpd->power_on = pd_power_up_a3rv; - } else { - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - } + genpd->power_off = pd_power_down; + genpd->power_on = pd_power_up; genpd->power_on(&sh7372_pd->genpd); } @@ -152,11 +182,15 @@ void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, { struct device *dev = &pdev->dev; - if (!dev->power.subsys_data) { - pm_clk_init(dev); - pm_clk_add(dev, NULL); - } pm_genpd_add_device(&sh7372_pd->genpd, dev); + if (pm_clk_no_clocks(dev)) + pm_clk_add(dev, NULL); +} + +void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, + struct sh7372_pm_domain *sh7372_sd) +{ + pm_genpd_add_subdomain(&sh7372_pd->genpd, &sh7372_sd->genpd); } struct sh7372_pm_domain sh7372_a4lc = { @@ -171,6 +205,14 @@ struct sh7372_pm_domain sh7372_d4 = { .bit_shift = 3, }; +struct sh7372_pm_domain sh7372_a4r = { + .bit_shift = 5, + .gov = &sh7372_always_on_gov, + .suspend = sh7372_a4r_suspend, + .resume = sh7372_intcs_resume, + .stay_on = true, +}; + struct sh7372_pm_domain sh7372_a3rv = { .bit_shift = 6, }; @@ -179,39 +221,187 @@ struct sh7372_pm_domain sh7372_a3ri = { .bit_shift = 8, }; +struct sh7372_pm_domain sh7372_a3sp = { + .bit_shift = 11, + .gov = &sh7372_always_on_gov, + .no_debug = true, +}; + struct sh7372_pm_domain sh7372_a3sg = { .bit_shift = 13, }; #endif /* CONFIG_PM */ +#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) +static int sh7372_do_idle_core_standby(unsigned long unused) +{ + cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ + return 0; +} + static void sh7372_enter_core_standby(void) { - void __iomem *smfram = (void __iomem *)SMFRAM; + /* set reset vector, translate 4k */ + __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR); + __raw_writel(0, APARMBAREA); - __raw_writel(0, APARMBAREA); /* translate 4k */ - __raw_writel(__pa(sh7372_cpu_resume), SBAR); /* set reset vector */ - __raw_writel(0x10, SYSTBCR); /* enable core standby */ + /* enter sleep mode with SYSTBCR to 0x10 */ + __raw_writel(0x10, SYSTBCR); + cpu_suspend(0, sh7372_do_idle_core_standby); + __raw_writel(0, SYSTBCR); - __raw_writel(0, smfram + 0x3c); /* clear page table address */ + /* disable reset vector translation */ + __raw_writel(0, SBAR); +} +#endif + +#ifdef CONFIG_SUSPEND +static void sh7372_enter_a3sm_common(int pllc0_on) +{ + /* set reset vector, translate 4k */ + __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR); + __raw_writel(0, APARMBAREA); + + if (pllc0_on) + __raw_writel(0, PLLC01STPCR); + else + __raw_writel(1 << 28, PLLC01STPCR); + + __raw_writel(0, PDNSEL); /* power-down A3SM only, not A4S */ + __raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */ + cpu_suspend(0, sh7372_do_idle_a3sm); + __raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */ + + /* disable reset vector translation */ + __raw_writel(0, SBAR); +} + +static int sh7372_a3sm_valid(unsigned long *mskp, unsigned long *msk2p) +{ + unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4; + unsigned long msk, msk2; + + /* check active clocks to determine potential wakeup sources */ + + mstpsr0 = __raw_readl(MSTPSR0); + if ((mstpsr0 & 0x00000003) != 0x00000003) { + pr_debug("sh7372 mstpsr0 0x%08lx\n", mstpsr0); + return 0; + } + + mstpsr1 = __raw_readl(MSTPSR1); + if ((mstpsr1 & 0xff079b7f) != 0xff079b7f) { + pr_debug("sh7372 mstpsr1 0x%08lx\n", mstpsr1); + return 0; + } - sh7372_cpu_suspend(); - cpu_init(); + mstpsr2 = __raw_readl(MSTPSR2); + if ((mstpsr2 & 0x000741ff) != 0x000741ff) { + pr_debug("sh7372 mstpsr2 0x%08lx\n", mstpsr2); + return 0; + } - /* if page table address is non-NULL then we have been powered down */ - if (__raw_readl(smfram + 0x3c)) { - __raw_writel(__raw_readl(smfram + 0x40), - __va(__raw_readl(smfram + 0x3c))); + mstpsr3 = __raw_readl(MSTPSR3); + if ((mstpsr3 & 0x1a60f010) != 0x1a60f010) { + pr_debug("sh7372 mstpsr3 0x%08lx\n", mstpsr3); + return 0; + } - flush_tlb_all(); - set_cr(__raw_readl(smfram + 0x38)); + mstpsr4 = __raw_readl(MSTPSR4); + if ((mstpsr4 & 0x00008cf0) != 0x00008cf0) { + pr_debug("sh7372 mstpsr4 0x%08lx\n", mstpsr4); + return 0; } - __raw_writel(0, SYSTBCR); /* disable core standby */ - __raw_writel(0, SBAR); /* disable reset vector translation */ + msk = 0; + msk2 = 0; + + /* make bitmaps of limited number of wakeup sources */ + + if ((mstpsr2 & (1 << 23)) == 0) /* SPU2 */ + msk |= 1 << 31; + + if ((mstpsr2 & (1 << 12)) == 0) /* MFI_MFIM */ + msk |= 1 << 21; + + if ((mstpsr4 & (1 << 3)) == 0) /* KEYSC */ + msk |= 1 << 2; + + if ((mstpsr1 & (1 << 24)) == 0) /* CMT0 */ + msk |= 1 << 1; + + if ((mstpsr3 & (1 << 29)) == 0) /* CMT1 */ + msk |= 1 << 1; + + if ((mstpsr4 & (1 << 0)) == 0) /* CMT2 */ + msk |= 1 << 1; + + if ((mstpsr2 & (1 << 13)) == 0) /* MFI_MFIS */ + msk2 |= 1 << 17; + + *mskp = msk; + *msk2p = msk2; + + return 1; +} + +static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p) +{ + u16 tmp, irqcr1, irqcr2; + int k; + + irqcr1 = 0; + irqcr2 = 0; + + /* convert INTCA ICR register layout to SYSC IRQCR+IRQCR2 */ + for (k = 0; k <= 7; k++) { + tmp = (icr >> ((7 - k) * 4)) & 0xf; + irqcr1 |= (tmp & 0x03) << (k * 2); + irqcr2 |= (tmp >> 2) << (k * 2); + } + + *irqcr1p = irqcr1; + *irqcr2p = irqcr2; +} + +static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2) +{ + u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high; + unsigned long tmp; + + /* read IRQ0A -> IRQ15A mask */ + tmp = bitrev8(__raw_readb(INTMSK00A)); + tmp |= bitrev8(__raw_readb(INTMSK10A)) << 8; + + /* setup WUPSMSK from clocks and external IRQ mask */ + msk = (~msk & 0xc030000f) | (tmp << 4); + __raw_writel(msk, WUPSMSK); + + /* propage level/edge trigger for external IRQ 0->15 */ + sh7372_icr_to_irqcr(__raw_readl(ICR1A), &irqcrx_low, &irqcry_low); + sh7372_icr_to_irqcr(__raw_readl(ICR2A), &irqcrx_high, &irqcry_high); + __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR); + __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR2); + + /* read IRQ16A -> IRQ31A mask */ + tmp = bitrev8(__raw_readb(INTMSK20A)); + tmp |= bitrev8(__raw_readb(INTMSK30A)) << 8; + + /* setup WUPSMSK2 from clocks and external IRQ mask */ + msk2 = (~msk2 & 0x00030000) | tmp; + __raw_writel(msk2, WUPSMSK2); + + /* propage level/edge trigger for external IRQ 16->31 */ + sh7372_icr_to_irqcr(__raw_readl(ICR3A), &irqcrx_low, &irqcry_low); + sh7372_icr_to_irqcr(__raw_readl(ICR4A), &irqcrx_high, &irqcry_high); + __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3); + __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4); } +#endif #ifdef CONFIG_CPU_IDLE + static void sh7372_cpuidle_setup(struct cpuidle_device *dev) { struct cpuidle_state *state; @@ -239,9 +429,25 @@ static void sh7372_cpuidle_init(void) {} #endif #ifdef CONFIG_SUSPEND + static int sh7372_enter_suspend(suspend_state_t suspend_state) { - sh7372_enter_core_standby(); + unsigned long msk, msk2; + + /* check active clocks to determine potential wakeup sources */ + if (sh7372_a3sm_valid(&msk, &msk2)) { + + /* convert INTC mask and sense to SYSC mask and sense */ + sh7372_setup_a3sm(msk, msk2); + + /* enter A3SM sleep with PLLC0 off */ + pr_debug("entering A3SM\n"); + sh7372_enter_a3sm_common(0); + } else { + /* default to Core Standby that supports all wakeup sources */ + pr_debug("entering Core Standby\n"); + sh7372_enter_core_standby(); + } return 0; } @@ -253,9 +459,6 @@ static void sh7372_suspend_init(void) static void sh7372_suspend_init(void) {} #endif -#define DBGREG1 0xe6100020 -#define DBGREG9 0xe6100040 - void __init sh7372_pm_init(void) { /* enable DBG hardware block to kick SYSC */ @@ -263,6 +466,9 @@ void __init sh7372_pm_init(void) __raw_writel(0x0000a501, DBGREG9); __raw_writel(0x00000000, DBGREG1); + /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ + __raw_writel(0, PDNSEL); + sh7372_suspend_init(); sh7372_cpuidle_init(); } diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c index 6ec454e1e063..bd5c6a3b8c55 100644 --- a/arch/arm/mach-shmobile/pm_runtime.c +++ b/arch/arm/mach-shmobile/pm_runtime.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/pm_runtime.h> #include <linux/pm_domain.h> +#include <linux/pm_clock.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/sh_clk.h> diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 79f0413d8725..2380389e6ac5 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -30,6 +30,7 @@ #include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <linux/pm_domain.h> #include <mach/hardware.h> #include <mach/sh7372.h> #include <asm/mach-types.h> @@ -169,35 +170,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -602,6 +603,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -818,7 +963,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; @@ -829,6 +974,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, @@ -844,9 +991,14 @@ void __init sh7372_add_standard_devices(void) sh7372_init_pm_domain(&sh7372_a4lc); sh7372_init_pm_domain(&sh7372_a4mp); sh7372_init_pm_domain(&sh7372_d4); + sh7372_init_pm_domain(&sh7372_a4r); sh7372_init_pm_domain(&sh7372_a3rv); sh7372_init_pm_domain(&sh7372_a3ri); sh7372_init_pm_domain(&sh7372_a3sg); + sh7372_init_pm_domain(&sh7372_a3sp); + + sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv); + sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc); platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); @@ -857,6 +1009,25 @@ void __init sh7372_add_standard_devices(void) sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device); sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device); sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device); + sh7372_add_device_to_domain(&sh7372_a4r, &iic0_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu0_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu1_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device); + sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); } void __init sh7372_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S index d37d3ca4d18f..f3ab3c5810ea 100644 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -30,58 +30,20 @@ */ #include <linux/linkage.h> +#include <linux/init.h> +#include <asm/memory.h> #include <asm/assembler.h> -#define SMFRAM 0xe6a70000 - - .align -kernel_flush: - .word v7_flush_dcache_all - - .align 3 -ENTRY(sh7372_cpu_suspend) - stmfd sp!, {r0-r12, lr} @ save registers on stack - - ldr r8, =SMFRAM - - mov r4, sp @ Store sp - mrs r5, spsr @ Store spsr - mov r6, lr @ Store lr - stmia r8!, {r4-r6} - - mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register - mrc p15, 0, r5, c2, c0, 0 @ TTBR0 - mrc p15, 0, r6, c2, c0, 1 @ TTBR1 - mrc p15, 0, r7, c2, c0, 2 @ TTBCR - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mrc p15, 0, r5, c10, c2, 0 @ PRRR - mrc p15, 0, r6, c10, c2, 1 @ NMRR - stmia r8!,{r4-r6} - - mrc p15, 0, r4, c13, c0, 1 @ Context ID - mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - mrs r7, cpsr @ Store current cpsr - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c1, c0, 0 @ save control register - stmia r8!, {r4} - - /* - * jump out to kernel flush routine - * - reuse that code is better - * - it executes in a cached space so is faster than refetch per-block - * - should be faster and will change with kernel - * - 'might' have to copy address, load and jump to it - * Flush all data from the L1 data cache before disabling - * SCTLR.C bit. - */ - ldr r1, kernel_flush - mov lr, pc - bx r1 +#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) + .align 12 + .text + .global sh7372_resume_core_standby_a3sm +sh7372_resume_core_standby_a3sm: + ldr pc, 1f +1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET + .global sh7372_do_idle_a3sm +sh7372_do_idle_a3sm: /* * Clear the SCTLR.C bit to prevent further data cache * allocation. Clearing SCTLR.C would make all the data accesses @@ -92,10 +54,13 @@ ENTRY(sh7372_cpu_suspend) mcr p15, 0, r0, c1, c0, 0 isb + /* disable L2 cache in the aux control register */ + mrc p15, 0, r10, c1, c0, 1 + bic r10, r10, #2 + mcr p15, 0, r10, c1, c0, 1 + /* - * Invalidate L1 data cache. Even though only invalidate is - * necessary exported flush API is used here. Doing clean - * on already clean cache would be almost NOP. + * Invalidate data cache again. */ ldr r1, kernel_flush blx r1 @@ -115,146 +80,16 @@ ENTRY(sh7372_cpu_suspend) dsb dmb -/* - * =================================== - * == WFI instruction => Enter idle == - * =================================== - */ - wfi @ wait for interrupt - -/* - * =================================== - * == Resume path for non-OFF modes == - * =================================== - */ - mrc p15, 0, r0, c1, c0, 0 - tst r0, #(1 << 2) @ Check C bit enabled? - orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared - mcreq p15, 0, r0, c1, c0, 0 - isb - -/* - * =================================== - * == Exit point from non-OFF modes == - * =================================== - */ - ldmfd sp!, {r0-r12, pc} @ restore regs and return +#define SPDCR 0xe6180008 +#define A3SM (1 << 12) - .pool + /* A3SM power down */ + ldr r0, =SPDCR + ldr r1, =A3SM + str r1, [r0] +1: + b 1b - .align 12 - .text - .global sh7372_cpu_resume -sh7372_cpu_resume: - - mov r1, #0 - /* - * Invalidate all instruction caches to PoU - * and flush branch target cache - */ - mcr p15, 0, r1, c7, c5, 0 - - ldr r3, =SMFRAM - - ldmia r3!, {r4-r6} - mov sp, r4 @ Restore sp - msr spsr_cxsf, r5 @ Restore spsr - mov lr, r6 @ Restore lr - - ldmia r3!, {r4-r7} - mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register - mcr p15, 0, r5, c2, c0, 0 @ TTBR0 - mcr p15, 0, r6, c2, c0, 1 @ TTBR1 - mcr p15, 0, r7, c2, c0, 2 @ TTBCR - - ldmia r3!,{r4-r6} - mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mcr p15, 0, r5, c10, c2, 0 @ PRRR - mcr p15, 0, r6, c10, c2, 1 @ NMRR - - ldmia r3!,{r4-r7} - mcr p15, 0, r4, c13, c0, 1 @ Context ID - mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - msr cpsr, r7 @ store cpsr - - /* Starting to enable MMU here */ - mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ - and r7, #0x7 - cmp r7, #0x0 - beq usettbr0 -ttbr_error: - /* - * More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ - b ttbr_error - - .align -cache_pred_disable_mask: - .word 0xFFFFE7FB -ttbrbit_mask: - .word 0xFFFFC000 -table_index_mask: - .word 0xFFF00000 -table_entry: - .word 0x00000C02 -usettbr0: - - mrc p15, 0, r2, c2, c0, 0 - ldr r5, ttbrbit_mask - and r2, r5 - mov r4, pc - ldr r5, table_index_mask - and r4, r5 @ r4 = 31 to 20 bits of pc - /* Extract the value to be written to table entry */ - ldr r6, table_entry - /* r6 has the value to be written to table entry */ - add r6, r6, r4 - /* Getting the address of table entry to modify */ - lsr r4, #18 - /* r2 has the location which needs to be modified */ - add r2, r4 - ldr r4, [r2] - str r6, [r2] /* modify the table entry */ - - mov r7, r6 - mov r5, r2 - mov r6, r4 - /* r5 = original page table address */ - /* r6 = original page table data */ - - mov r0, #0 - mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer - mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array - mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB - mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - - /* - * Restore control register. This enables the MMU. - * The caches and prediction are not enabled here, they - * will be enabled after restoring the MMU table entry. - */ - ldmia r3!, {r4} - stmia r3!, {r5} /* save original page table address */ - stmia r3!, {r6} /* save original page table data */ - stmia r3!, {r7} /* save modified page table data */ - - ldr r2, cache_pred_disable_mask - and r4, r2 - mcr p15, 0, r4, c1, c0, 0 - dsb - isb - - ldr r0, =restoremmu_on - bx r0 - -/* - * ============================== - * == Exit point from OFF mode == - * ============================== - */ -restoremmu_on: - - ldmfd sp!, {r0-r12, pc} @ restore regs and return +kernel_flush: + .word v7_flush_dcache_all +#endif diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index 7a1f3c0eadb8..4674a4c221db 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h deleted file mode 100644 index 51735221ea19..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/memory.h - * - * Memory map for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#include <plat/memory.h> - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c index 69006f694220..a5ff98eed1db 100644 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ b/arch/arm/mach-spear3xx/spear300_evb.c @@ -64,7 +64,7 @@ static void __init spear300_evb_init(void) } MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, .timer = &spear3xx_timer, diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c index c8684ce1f9b3..45d180d59362 100644 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ b/arch/arm/mach-spear3xx/spear310_evb.c @@ -70,7 +70,7 @@ static void __init spear310_evb_init(void) } MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, .timer = &spear3xx_timer, diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c index a12b353940d6..22879848d73a 100644 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ b/arch/arm/mach-spear3xx/spear320_evb.c @@ -68,7 +68,7 @@ static void __init spear320_evb_init(void) } MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, .timer = &spear3xx_timer, diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot index 7a1f3c0eadb8..4674a4c221db 100644 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h deleted file mode 100644 index 781f088fc228..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/memory.h - * - * Memory map for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#include <plat/memory.h> - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c index f19cefe91a2b..8238fe38e713 100644 --- a/arch/arm/mach-spear6xx/spear600_evb.c +++ b/arch/arm/mach-spear6xx/spear600_evb.c @@ -43,7 +43,7 @@ static void __init spear600_evb_init(void) } MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear6xx_map_io, .init_irq = spear6xx_init_irq, .timer = &spear6xx_timer, diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot index f135c9deae10..5e02d4156b04 100644 --- a/arch/arm/mach-tcc8k/Makefile.boot +++ b/arch/arm/mach-tcc8k/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20800000 diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c index 4cb3c2dd905c..777a5bb9eed2 100644 --- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -73,7 +73,7 @@ static void __init tcc8k_map_io(void) } MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .map_io = tcc8k_map_io, .init_irq = tcc8k_init_irq, .init_machine = tcc8k_init, diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 428ad122be03..5e870d29eca1 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,4 +1,4 @@ -zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 +zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 9c27b95b8d86..6db7d699ef1c 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -24,12 +24,10 @@ #include <mach/pinmux.h> #include "board.h" +#include "board-harmony.h" #ifdef CONFIG_TEGRA_PCI -/* GPIO 3 of the PMIC */ -#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2) - static int __init harmony_pcie_init(void) { struct regulator *regulator = NULL; @@ -38,11 +36,11 @@ static int __init harmony_pcie_init(void) if (!machine_is_harmony()) return 0; - err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05"); + err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05"); if (err) return err; - gpio_direction_output(EN_VDD_1V05_GPIO, 1); + gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1); regulator = regulator_get(NULL, "pex_clk"); if (IS_ERR_OR_NULL(regulator)) @@ -68,7 +66,7 @@ err_pcie: regulator_disable(regulator); regulator_put(regulator); err_reg: - gpio_free(EN_VDD_1V05_GPIO); + gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO); return err; } diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 846cd7d69e3e..93c793f48caf 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -123,8 +123,8 @@ static struct platform_device *harmony_devices[] __initdata = { &harmony_audio_device, }; -static void __init tegra_harmony_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 2; mi->bank[0].start = PHYS_OFFSET; @@ -179,7 +179,7 @@ static void __init tegra_harmony_init(void) } MACHINE_START(HARMONY, "harmony") - .boot_params = 0x00000100, + .atag_offset = 0x100, .fixup = tegra_harmony_fixup, .map_io = tegra_map_common_io, .init_early = tegra_init_early, diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h index d85142edaf6b..139d96c93843 100644 --- a/arch/arm/mach-tegra/board-harmony.h +++ b/arch/arm/mach-tegra/board-harmony.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_HARMONY_H #define _MACH_TEGRA_BOARD_HARMONY_H +#include <mach/gpio-tegra.h> + #define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) #define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_)) @@ -31,6 +33,7 @@ #define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2 #define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0 #define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1 +#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2) void harmony_pinmux_init(void); int harmony_regulator_init(void); diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index ea2f79c9879b..fbc9e0ed926e 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -84,8 +84,8 @@ static void paz00_usb_init(void) platform_device_register(&tegra_ehci3_device); } -static void __init tegra_paz00_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 1; mi->bank[0].start = PHYS_OFFSET; @@ -127,7 +127,7 @@ static void __init tegra_paz00_init(void) } MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") - .boot_params = 0x00000100, + .atag_offset = 0x100, .fixup = tegra_paz00_fixup, .map_io = tegra_map_common_io, .init_early = tegra_init_early, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index d4ff39ddaeb3..42ce8639b90c 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_PAZ00_H #define _MACH_TEGRA_BOARD_PAZ00_H +#include <mach/gpio-tegra.h> + #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 56cbabf6aa68..9e98ac706f40 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -201,7 +201,7 @@ static void __init tegra_wario_init(void) MACHINE_START(SEABOARD, "seaboard") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, @@ -210,7 +210,7 @@ MACHINE_START(SEABOARD, "seaboard") MACHINE_END MACHINE_START(KAEN, "kaen") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, @@ -219,7 +219,7 @@ MACHINE_START(KAEN, "kaen") MACHINE_END MACHINE_START(WARIO, "wario") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h index d8415e1a8434..15b6c57361be 100644 --- a/arch/arm/mach-tegra/board-seaboard.h +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_SEABOARD_H #define _MACH_TEGRA_BOARD_SEABOARD_H +#include <mach/gpio-tegra.h> + #define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 #define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 47c596cdbf32..bcb1916e68b9 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -13,12 +13,11 @@ * GNU General Public License for more details. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <mach/pinmux.h> -#include <mach/gpio.h> #include "gpio-names.h" #include "board-trimslice.h" diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index 89a6d2adc1de..e3d9ec2f0fe1 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -126,8 +126,8 @@ static void trimslice_usb_init(void) platform_device_register(&tegra_ehci1_device); } -static void __init tegra_trimslice_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 2; mi->bank[0].start = PHYS_OFFSET; @@ -171,7 +171,7 @@ static void __init tegra_trimslice_init(void) } MACHINE_START(TRIMSLICE, "trimslice") - .boot_params = 0x00000100, + .atag_offset = 0x100, .fixup = tegra_trimslice_fixup, .map_io = tegra_map_common_io, .init_early = tegra_init_early, diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h index 7a7dee86b4da..50f128d87779 100644 --- a/arch/arm/mach-tegra/board-trimslice.h +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H #define _MACH_TEGRA_BOARD_TRIMSLICE_H +#include <mach/gpio-tegra.h> + #define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ #define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 0e1016a827ac..0e0fd4d889bd 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -32,7 +32,6 @@ #include <asm/system.h> -#include <mach/hardware.h> #include <mach/clk.h> /* Frequency table index must be sequential starting at 0 */ diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index e0ebe65c1657..619abc63aee8 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -21,7 +21,7 @@ #include <mach/io.h> #include <mach/iomap.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =IO_APB_PHYS @ physical ldr \rv, =IO_APB_VIRT @ virtual orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF) diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h index 537db3aa81a7..87d37fdf5084 100644 --- a/arch/arm/mach-tegra/include/mach/memory.h +++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h @@ -1,10 +1,9 @@ /* - * arch/arm/mach-tegra/include/mach/memory.h + * arch/arm/mach-tegra/include/mach/gpio.h * * Copyright (C) 2010 Google, Inc. * * Author: - * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> * * This software is licensed under the terms of the GNU General Public @@ -18,11 +17,23 @@ * */ -#ifndef __MACH_TEGRA_MEMORY_H -#define __MACH_TEGRA_MEMORY_H +#ifndef __MACH_TEGRA_GPIO_TEGRA_H +#define __MACH_TEGRA_GPIO_TEGRA_H -/* physical offset of RAM */ -#define PLAT_PHYS_OFFSET UL(0) +#include <linux/types.h> +#include <mach/irqs.h> -#endif +#define TEGRA_NR_GPIOS INT_GPIO_NR + +#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) + +struct tegra_gpio_table { + int gpio; /* GPIO number */ + bool enable; /* Enable for GPIO at init? */ +}; +void tegra_gpio_config(struct tegra_gpio_table *table, int num); +void tegra_gpio_enable(int gpio); +void tegra_gpio_disable(int gpio); + +#endif diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h index 196f114dc241..e69de29bb2d1 100644 --- a/arch/arm/mach-tegra/include/mach/gpio.h +++ b/arch/arm/mach-tegra/include/mach/gpio.h @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/gpio.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_GPIO_H -#define __MACH_TEGRA_GPIO_H - -#include <linux/init.h> -#include <mach/irqs.h> - -#define TEGRA_NR_GPIOS INT_GPIO_NR - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) -#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE) - -static inline int gpio_to_irq(unsigned int gpio) -{ - if (gpio < TEGRA_NR_GPIOS) - return INT_GPIO_BASE + gpio; - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned int irq) -{ - if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR)) - return irq - INT_GPIO_BASE; - return -EINVAL; -} - -struct tegra_gpio_table { - int gpio; /* GPIO number */ - bool enable; /* Enable for GPIO at init? */ -}; - -void tegra_gpio_config(struct tegra_gpio_table *table, int num); -void tegra_gpio_enable(int gpio); -void tegra_gpio_disable(int gpio); - -#endif diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 0886cbccddee..7d2b5d03c1df 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -114,10 +114,10 @@ void __init smp_init_cpus(void) { unsigned int i, ncores = scu_get_core_count(scu_base); - if (ncores > NR_CPUS) { - printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index 88081bb3ec52..37576a721aeb 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -28,6 +28,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <asm/mach-types.h> +#include <mach/gpio-tegra.h> #include <mach/usb_phy.h> #include <mach/iomap.h> diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 32a7b0f7e9f7..d6e5d306557b 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -6,6 +6,9 @@ comment "ST-Ericsson Mobile Platform Products" config MACH_U300 bool "U300" + select PINCTRL + select PINMUX_U300 + select GPIO_U300 comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 8fd354aaf0a7..285538124e5e 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o padmux.o +obj-y := core.o clock.o timer.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot index 6fbfc6ea2d35..69357affbd77 100644 --- a/arch/arm/mach-u300/Makefile.boot +++ b/arch/arm/mach-u300/Makefile.boot @@ -4,10 +4,10 @@ # INITRD_PHYS must be in RAM ifdef CONFIG_MACH_U300_SINGLE_RAM - zreladdr-y := 0x28E08000 + zreladdr-y += 0x28E08000 params_phys-y := 0x28E00100 else - zreladdr-y := 0x48008000 + zreladdr-y += 0x48008000 params_phys-y := 0x48000100 endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 399c89f14dfb..f4ad6d2e26f3 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -25,6 +25,9 @@ #include <linux/err.h> #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/dma-mapping.h> #include <asm/types.h> #include <asm/setup.h> @@ -37,6 +40,7 @@ #include <mach/hardware.h> #include <mach/syscon.h> #include <mach/dma_channels.h> +#include <mach/gpio-u300.h> #include "clock.h" #include "mmc.h" @@ -92,6 +96,8 @@ static struct map_desc u300_io_desc[] __initdata = { void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); + /* We enable a real big DMA buffer if need be. */ + init_consistent_dma_size(SZ_4M); } /* @@ -239,7 +245,7 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#ifdef U300_COH901571_3 +#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -252,6 +258,7 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, +#endif #ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", @@ -266,7 +273,6 @@ static struct resource gpio_resources[] = { .flags = IORESOURCE_IRQ, }, #endif /* CONFIG_MACH_U300_BS335 */ -#endif /* U300_COH901571_3 */ }; static struct resource keypad_resources[] = { @@ -1535,6 +1541,14 @@ static struct coh901318_platform coh901318_platform = { .max_channels = U300_DMA_CHANNELS, }; +static struct resource pinmux_resources[] = { + { + .start = U300_SYSCON_BASE, + .end = U300_SYSCON_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device wdog_device = { .name = "coh901327_wdog", .id = -1, @@ -1556,11 +1570,35 @@ static struct platform_device i2c1_device = { .resource = i2c1_resources, }; +/* + * The different variants have a few different versions of the + * GPIO block, with different number of ports. + */ +static struct u300_gpio_platform u300_gpio_plat = { +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) + .variant = U300_GPIO_COH901335, + .ports = 3, +#endif +#ifdef CONFIG_MACH_U300_BS335 + .variant = U300_GPIO_COH901571_3_BS335, + .ports = 7, +#endif +#ifdef CONFIG_MACH_U300_BS365 + .variant = U300_GPIO_COH901571_3_BS365, + .ports = 5, +#endif + .gpio_base = 0, + .gpio_irq_base = IRQ_U300_GPIO_BASE, +}; + static struct platform_device gpio_device = { .name = "u300-gpio", .id = -1, .num_resources = ARRAY_SIZE(gpio_resources), .resource = gpio_resources, + .dev = { + .platform_data = &u300_gpio_plat, + }, }; static struct platform_device keypad_device = { @@ -1630,6 +1668,72 @@ static struct platform_device dma_device = { }, }; +static struct platform_device pinmux_device = { + .name = "pinmux-u300", + .id = -1, + .num_resources = ARRAY_SIZE(pinmux_resources), + .resource = pinmux_resources, +}; + +/* Pinmux settings */ +static struct pinmux_map u300_pinmux_map[] = { + /* anonymous maps for chip power and EMIFs */ + PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"), + PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"), + PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"), + /* per-device maps for MMC/SD, SPI and UART */ + PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"), + PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"), + PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"), +}; + +struct u300_mux_hog { + const char *name; + struct device *dev; + struct pinmux *pmx; +}; + +static struct u300_mux_hog u300_mux_hogs[] = { + { + .name = "uart0", + .dev = &uart0_device.dev, + }, + { + .name = "spi0", + .dev = &pl022_device.dev, + }, + { + .name = "mmc0", + .dev = &mmcsd_device.dev, + }, +}; + +static int __init u300_pinmux_fetch(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) { + struct pinmux *pmx; + int ret; + + pmx = pinmux_get(u300_mux_hogs[i].dev, NULL); + if (IS_ERR(pmx)) { + pr_err("u300: could not get pinmux hog %s\n", + u300_mux_hogs[i].name); + continue; + } + ret = pinmux_enable(pmx); + if (ret) { + pr_err("u300: could enable pinmux hog %s\n", + u300_mux_hogs[i].name); + continue; + } + u300_mux_hogs[i].pmx = pmx; + } + return 0; +} +subsys_initcall(u300_pinmux_fetch); + /* * Notice that AMBA devices are initialized before platform devices. * @@ -1643,10 +1747,10 @@ static struct platform_device *platform_devs[] __initdata = { &gpio_device, &nand_device, &wdog_device, - &ave_device + &ave_device, + &pinmux_device, }; - /* * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected * together so some interrupts are connected to the first one and some @@ -1666,7 +1770,7 @@ void __init u300_init_irq(void) BUG_ON(IS_ERR(clk)); clk_enable(clk); - for (i = 0; i < NR_IRQS; i++) + for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); @@ -1828,6 +1932,10 @@ void __init u300_init_devices(void) u300_assign_physmem(); + /* Initialize pinmuxing */ + pinmux_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); + /* Register subdevices on the I2C buses */ u300_i2c_register_board_devices(); diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index df715707bead..8ae8e4ab34b0 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,7 +10,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* If we move the address using MMU, use this. */ ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h new file mode 100644 index 000000000000..0c2b2021951a --- /dev/null +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2007-2011 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_GPIO_U300_H +#define __MACH_U300_GPIO_U300_H + +/* + * Individual pin assignments for the B26/S26. Notice that the + * actual usage of these pins depends on the PAD MUX settings, that + * is why the same number can potentially appear several times. + * In the reference design each pin is only used for one purpose. + * These were determined by inspecting the B26/S26 schematic: + * 2/1911-ROA 128 1603 + */ +#ifdef CONFIG_MACH_U300_BS2X +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ +#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ +#define U300_GPIO_PIN_CAM_SLEEP 4 +#define U300_GPIO_PIN_CAM_REG_EN 5 +#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ +#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ +#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ +#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ +#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ +#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ +#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ +#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ +#endif + +/* + * Individual pin assignments for the B330/S330 and B365/S365. + * Notice that the actual usage of these pins depends on the + * PAD MUX settings, that is why the same number can potentially + * appear several times. In the reference design each pin is only + * used for one purpose. These were determined by inspecting the + * S365 schematic. + */ +#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ + defined(CONFIG_MACH_U300_BS335) +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_UART_CTS 2 +#define U300_GPIO_PIN_UART_RTS 3 +#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ +#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ +#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ +#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ + +#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ +#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ +#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ +#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ +#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ +#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ +#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ +#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ +#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ +#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ +#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ +#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ +#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ +#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ +#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ +#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ +#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ +#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ +#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ +#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ +#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ + +#ifdef CONFIG_MACH_U300_BS335 + +#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ +#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ +#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ +#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ +#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ +#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ +#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ +#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ +#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ +#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ +#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ +#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ +#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ +#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ +#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ +#endif + +#endif + +/** + * enum u300_gpio_variant - the type of U300 GPIO employed + */ +enum u300_gpio_variant { + U300_GPIO_COH901335, + U300_GPIO_COH901571_3_BS335, + U300_GPIO_COH901571_3_BS365, +}; + +/** + * struct u300_gpio_platform - U300 GPIO platform data + * @variant: IP block variant + * @ports: number of GPIO block ports + * @gpio_base: first GPIO number for this block (use a free range) + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + */ +struct u300_gpio_platform { + enum u300_gpio_variant variant; + u8 ports; + int gpio_base; + int gpio_irq_base; +}; + +#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index d5a71abcbaea..e69de29bb2d1 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -1,294 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/gpio.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_H -#define __MACH_U300_GPIO_H - -#include <linux/kernel.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -/* Switch type depending on platform/chip variant */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_COH901335 -#endif -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) -#define U300_COH901571_3 -#endif - -/* Get base address for regs here */ -#include "u300-regs.h" -/* IRQ numbers */ -#include "irqs.h" - -/* - * This is the GPIO block definitions. GPIO (General Purpose I/O) can be - * used for anything, and often is. The event/enable etc figures are for - * the lowermost pin (pin 0 on each port), shift this left to match your - * pin if you're gonna use these values. - */ -#ifdef U300_COH901335 -#define U300_GPIO_PORTX_SPACING (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_GPIO_PXPDIR (0x00) -#define U300_GPIO_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x04) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x08) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x0C) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x10) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x14) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x18) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_GPIO_CR (0x54) -#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) -/* three ports of 8 bits each = GPIO pins 0..23 */ -#define U300_GPIO_NUM_PORTS 3 -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -#ifdef U300_COH901571_3 -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_GPIO_CR (0x00) -#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -#define U300_GPIO_PORTX_SPACING (0x30) -/* Port X Pin Data INPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDIR (0x04) -/* Port X Pin Data OUTPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDOR (0x08) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x0C) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x10) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x14) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x18) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x1C) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x20) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -#ifdef CONFIG_MACH_U300_BS335 -/* seven ports of 8 bits each = GPIO pins 0..55 */ -#define U300_GPIO_NUM_PORTS 7 -#else -/* five ports of 8 bits each = GPIO pins 0..39 */ -#define U300_GPIO_NUM_PORTS 5 -#endif -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -/* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#ifdef CONFIG_MACH_U300_BS335 - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif - -/* translates a pin number to a port number */ -#define PIN_TO_PORT(val) (val >> 3) - -/* These can be found in arch/arm/mach-u300/gpio.c */ -extern int gpio_is_valid(int number); -extern int gpio_request(unsigned gpio, const char *label); -extern void gpio_free(unsigned gpio); -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); -extern int gpio_register_callback(unsigned gpio, - int (*func)(void *arg), - void *); -extern int gpio_unregister_callback(unsigned gpio); -extern void enable_irq_on_gpio_pin(unsigned gpio, int edge); -extern void disable_irq_on_gpio_pin(unsigned gpio); -extern void gpio_pullup(unsigned gpio, int value); -extern int gpio_get_value(unsigned gpio); -extern void gpio_set_value(unsigned gpio, int value); - -#define gpio_get_value_cansleep gpio_get_value -#define gpio_set_value_cansleep gpio_set_value - -/* wrappers to sleep-enable the previous two functions */ -static inline unsigned gpio_to_irq(unsigned gpio) -{ - return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - /* - * FIXME: This is no 1-1 mapping at all, it points to the - * whole block of 8 pins. - */ - return (irq - IRQ_U300_GPIO_PORT0) << 3; -} - -#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index 09b1b28fa8fd..d270fea32926 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -72,7 +72,7 @@ /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_NR_IRQS 45 +#define U300_VIC_IRQS_END 45 #endif /* The DB3350-specific interrupt lines */ @@ -88,7 +88,7 @@ #define IRQ_U300_GPIO_PORT4 53 #define IRQ_U300_GPIO_PORT5 54 #define IRQ_U300_GPIO_PORT6 55 -#define U300_NR_IRQS 56 +#define U300_VIC_IRQS_END 56 #endif /* The DB3210-specific interrupt lines */ @@ -106,16 +106,25 @@ #define IRQ_U300_NFIF 45 #define IRQ_U300_NFIF2 46 #define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_NR_IRQS 48 +#define U300_VIC_IRQS_END 48 #endif -#ifdef CONFIG_AB3550_CORE -#define IRQ_AB3550_BASE (U300_NR_IRQS) -#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) +/* Maximum 8*7 GPIO lines */ +#ifdef CONFIG_GPIO_U300 +#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) +#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) +#else +#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) +#endif -#define NR_IRQS (IRQ_AB3550_END + 1) +/* Optional AB3550 mixsig chip */ +#ifdef CONFIG_AB3550_CORE +#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END) +#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38) #else -#define NR_IRQS U300_NR_IRQS +#define IRQ_AB3550_END (IRQ_U300_GPIO_END) #endif +#define NR_IRQS (IRQ_AB3550_END) + #endif diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index 888e2e351ee1..7034bae95de6 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -16,7 +16,7 @@ #ifdef CONFIG_MACH_U300_DUAL_RAM #define PLAT_PHYS_OFFSET UL(0x48000000) -#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) +#define BOOT_PARAMS_OFFSET 0x100 #else @@ -24,19 +24,14 @@ #define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#define BOOT_PARAMS_OFFSET (0x100 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2) #else #define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#define BOOT_PARAMS_OFFSET 0x100 #endif -#define BOOT_PARAMS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100) #endif -/* - * We enable a real big DMA buffer if need be. - */ -#define CONSISTENT_DMA_SIZE SZ_4M - #endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 7444f5c7da97..6e84f07a7c6f 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -234,91 +234,6 @@ #define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) #define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) #define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) -/* PAD MUX Control register 1 (LOW) 16bit (R/W) */ -#define U300_SYSCON_PMC1LR (0x007C) -#define U300_SYSCON_PMC1LR_MASK (0xFFFF) -#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) -#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) -#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000) -#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000) -#elif CONFIG_MACH_U300_BS365 -#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) -#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) -#endif -#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) -#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) -#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) -#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000) -#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00) -#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000) -#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400) -#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800) -#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00) -#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300) -#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000) -#define U300_SYSCON_PMC1LR_ETM_APP (0x0100) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C) -#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003) -#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001) -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002) -#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003) -/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */ -#define U300_SYSCON_PMC1HR (0x007E) -#define U300_SYSCON_PMC1HR_MASK (0xFFFF) -#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000) -#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000) -#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000) -#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0) -#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030) -#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010) -#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020) -#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030) -#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C) -#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004) -#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008) -#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C) -#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003) -#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001) -#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003) /* Step one for killing the applications system 16bit (-/W) */ #define U300_SYSCON_KA1R (0x0080) #define U300_SYSCON_KA1R_MASK (0xFFFF) @@ -357,57 +272,6 @@ #define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) #define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) #define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) -/* Padmux 2 control */ -#define U300_SYSCON_PMC2R (0x100) -#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0) -#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040) -#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080) -#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0) -#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300) -#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100) -#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200) -#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300) -#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00) -#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400) -#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800) -#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00) -#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000) -#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000) -#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000) -#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000) -#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000) -#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000) -#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000) -#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000) -/* TODO: More SYSCON registers missing */ -#define U300_SYSCON_PMC3R (0x10c) -#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) -#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) -#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) -#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) -/* TODO: Missing other configs */ -#define U300_SYSCON_PMC4R (0x168) -#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003) -#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C) -#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004) -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008) -#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C) -#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030) -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010) -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020) -#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030) -#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300) -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100) -#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200) /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ #define U300_SYSCON_S0CCR (0x120) #define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 677ccef5cd32..4d482aacc272 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -13,15 +13,14 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <linux/dmaengine.h> #include <linux/amba/mmci.h> #include <linux/slab.h> #include <mach/coh901318.h> #include <mach/dma_channels.h> +#include <mach/gpio-u300.h> #include "mmc.h" -#include "padmux.h" static struct mmci_platform_data mmc0_plat_data = { /* @@ -45,24 +44,9 @@ static struct mmci_platform_data mmc0_plat_data = { int __devinit mmc_init(struct amba_device *adev) { struct device *mmcsd_device = &adev->dev; - struct pmx *pmx; int ret = 0; mmcsd_device->platform_data = &mmc0_plat_data; - /* - * Setup padmuxing for MMC. Since this must always be - * compiled into the kernel, pmx is never released. - */ - pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING); - - if (IS_ERR(pmx)) - pr_warning("Could not get padmux handle\n"); - else { - ret = pmx_activate(mmcsd_device, pmx); - if (IS_ERR_VALUE(ret)) - pr_warning("Could not activate padmuxing\n"); - } - return ret; } diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c deleted file mode 100644 index 4c93c6cefd37..000000000000 --- a/arch/arm/mach-u300/padmux.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * - * arch/arm/mach-u300/padmux.c - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 PADMUX functions - * Author: Martin Persson <martin.persson@stericsson.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/mutex.h> -#include <linux/string.h> -#include <linux/bug.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <mach/u300-regs.h> -#include <mach/syscon.h> -#include "padmux.h" - -static DEFINE_MUTEX(pmx_mutex); - -const u32 pmx_registers[] = { - (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR), - (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR), - (U300_SYSCON_VBASE + U300_SYSCON_PMC2R), - (U300_SYSCON_VBASE + U300_SYSCON_PMC3R), - (U300_SYSCON_VBASE + U300_SYSCON_PMC4R) -}; - -/* High level functionality */ - -/* Lazy dog: - * onmask = { - * {"PMC1LR" mask, "PMC1LR" value}, - * {"PMC1HR" mask, "PMC1HR" value}, - * {"PMC2R" mask, "PMC2R" value}, - * {"PMC3R" mask, "PMC3R" value}, - * {"PMC4R" mask, "PMC4R" value} - * } - */ -static struct pmx mmc_setting = { - .setting = U300_APP_PMX_MMC_SETTING, - .default_on = false, - .activated = false, - .name = "MMC", - .onmask = { - {U300_SYSCON_PMC1LR_MMCSD_MASK, - U300_SYSCON_PMC1LR_MMCSD_MMCSD}, - {0, 0}, - {0, 0}, - {0, 0}, - {U300_SYSCON_PMC4R_APP_MISC_12_MASK, - U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO} - }, -}; - -static struct pmx spi_setting = { - .setting = U300_APP_PMX_SPI_SETTING, - .default_on = false, - .activated = false, - .name = "SPI", - .onmask = {{0, 0}, - {U300_SYSCON_PMC1HR_APP_SPI_2_MASK | - U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK | - U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK, - U300_SYSCON_PMC1HR_APP_SPI_2_SPI | - U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI | - U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI}, - {0, 0}, - {0, 0}, - {0, 0} - }, -}; - -/* Available padmux settings */ -static struct pmx *pmx_settings[] = { - &mmc_setting, - &spi_setting, -}; - -static void update_registers(struct pmx *pmx, bool activate) -{ - u16 regval, val, mask; - int i; - - for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) { - if (activate) - val = pmx->onmask[i].val; - else - val = 0; - - mask = pmx->onmask[i].mask; - if (mask != 0) { - regval = readw(pmx_registers[i]); - regval &= ~mask; - regval |= val; - writew(regval, pmx_registers[i]); - } - } -} - -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting) -{ - int i; - struct pmx *pmx = ERR_PTR(-ENOENT); - - if (dev == NULL) - return ERR_PTR(-EINVAL); - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (setting == pmx_settings[i]->setting) { - - if (pmx_settings[i]->dev != NULL) { - WARN(1, "padmux: required setting " - "in use by another consumer\n"); - } else { - pmx = pmx_settings[i]; - pmx->dev = dev; - dev_dbg(dev, "padmux: setting nr %d is now " - "bound to %s and ready to use\n", - setting, dev_name(dev)); - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return pmx; -} -EXPORT_SYMBOL(pmx_get); - -int pmx_put(struct device *dev, struct pmx *pmx) -{ - int i; - int ret = -ENOENT; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx->setting == pmx_settings[i]->setting) { - - if (dev != pmx->dev) { - WARN(1, "padmux: cannot release handle as " - "it is bound to another consumer\n"); - ret = -EINVAL; - break; - } else { - pmx_settings[i]->dev = NULL; - ret = 0; - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return ret; -} -EXPORT_SYMBOL(pmx_put); - -int pmx_activate(struct device *dev, struct pmx *pmx) -{ - int i, j, ret; - ret = 0; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - - /* Make sure the required bits are not used */ - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx) - continue; - - for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { - - if (pmx_settings[i]->onmask[j].mask & pmx-> - onmask[j].mask) { - /* More than one entry on the same bits */ - WARN(1, "padmux: cannot activate " - "setting. Bit conflict with " - "an active setting\n"); - - ret = -EUSERS; - goto exit; - } - } - } - update_registers(pmx, true); - pmx->activated = true; - dev_dbg(dev, "padmux: setting nr %d is activated\n", - pmx->setting); - -exit: - mutex_unlock(&pmx_mutex); - return ret; -} -EXPORT_SYMBOL(pmx_activate); - -int pmx_deactivate(struct device *dev, struct pmx *pmx) -{ - int i; - int ret = -ENOENT; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx_settings[i]->dev == NULL) - continue; - - if (pmx->setting == pmx_settings[i]->setting) { - - if (dev != pmx->dev) { - WARN(1, "padmux: cannot deactivate " - "pmx setting as it was activated " - "by another consumer\n"); - - ret = -EBUSY; - continue; - } else { - update_registers(pmx, false); - pmx_settings[i]->dev = NULL; - pmx->activated = false; - ret = 0; - dev_dbg(dev, "padmux: setting nr %d is deactivated", - pmx->setting); - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return ret; -} -EXPORT_SYMBOL(pmx_deactivate); - -/* - * For internal use only. If it is to be exported, - * it should be reentrant. Notice that pmx_activate - * (i.e. runtime settings) always override default settings. - */ -static int pmx_set_default(void) -{ - /* Used to identify several entries on the same bits */ - u16 modbits[ARRAY_SIZE(pmx_registers)]; - - int i, j; - - memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16)); - - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (!pmx_settings[i]->default_on) - continue; - - for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { - - /* Make sure there is only one entry on the same bits */ - if (modbits[j] & pmx_settings[i]->onmask[j].mask) { - BUG(); - return -EUSERS; - } - modbits[j] |= pmx_settings[i]->onmask[j].mask; - } - update_registers(pmx_settings[i], true); - } - return 0; -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -static int pmx_show(struct seq_file *s, void *data) -{ - int i; - seq_printf(s, "-------------------------------------------------\n"); - seq_printf(s, "SETTING BOUND TO DEVICE STATE\n"); - seq_printf(s, "-------------------------------------------------\n"); - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - /* Format pmx and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ? - dev_name(pmx_settings[i]->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - - seq_printf(s, - "%s\t%s\n", - &cdp[0], - pmx_settings[i]->activated ? - "ACTIVATED" : "DEACTIVATED" - ); - - } - mutex_unlock(&pmx_mutex); - return 0; -} - -static int pmx_open(struct inode *inode, struct file *file) -{ - return single_open(file, pmx_show, NULL); -} - -static const struct file_operations pmx_operations = { - .owner = THIS_MODULE, - .open = pmx_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_pmx_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view pmx settings */ - (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO, - NULL, NULL, - &pmx_operations); - return 0; -} - -/* - * This needs to come in after the core_initcall(), - * because debugfs is not available until - * the subsystems come up. - */ -module_init(init_pmx_read_debugfs); -#endif - -static int __init pmx_init(void) -{ - int ret; - - ret = pmx_set_default(); - - if (IS_ERR_VALUE(ret)) - pr_crit("padmux: default settings could not be set\n"); - - return 0; -} - -/* Should be initialized before consumers */ -core_initcall(pmx_init); diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h deleted file mode 100644 index 6e8b86064097..000000000000 --- a/arch/arm/mach-u300/padmux.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * - * arch/arm/mach-u300/padmux.h - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 PADMUX API - * Author: Martin Persson <martin.persson@stericsson.com> - */ - -#ifndef __MACH_U300_PADMUX_H -#define __MACH_U300_PADMUX_H - -enum pmx_settings { - U300_APP_PMX_MMC_SETTING, - U300_APP_PMX_SPI_SETTING -}; - -struct pmx_onmask { - u16 mask; /* Mask bits */ - u16 val; /* Value when active */ -}; - -struct pmx { - struct device *dev; - enum pmx_settings setting; - char *name; - bool activated; - bool default_on; - struct pmx_onmask onmask[]; -}; - -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting); -int pmx_put(struct device *dev, struct pmx *pmx); -int pmx_activate(struct device *dev, struct pmx *pmx); -int pmx_deactivate(struct device *dev, struct pmx *pmx); - -#endif diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 7b597e2b19e2..a1affacfa59c 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -14,8 +14,6 @@ #include <mach/coh901318.h> #include <mach/dma_channels.h> -#include "padmux.h" - /* * The following is for the actual devices on the SSP/SPI bus */ @@ -95,25 +93,7 @@ static struct pl022_ssp_controller ssp_platform_data = { void __init u300_spi_init(struct amba_device *adev) { - struct pmx *pmx; - adev->dev.platform_data = &ssp_platform_data; - /* - * Setup padmuxing for SPI. Since this must always be - * compiled into the kernel, pmx is never released. - */ - pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING); - - if (IS_ERR(pmx)) - dev_warn(&adev->dev, "Could not get padmux handle\n"); - else { - int ret; - - ret = pmx_activate(&adev->dev, pmx); - if (IS_ERR_VALUE(ret)) - dev_warn(&adev->dev, "Could not activate padmuxing\n"); - } - } void __init u300_spi_register_board_devices(void) diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index 48b3b7f39966..80e7305589c6 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -61,7 +61,7 @@ static void __init u300_init_machine(void) MACHINE_START(U300, MACH_U300_STRING) /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .boot_params = BOOT_PARAMS_OFFSET, + .atag_offset = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, .reserve = u300_reserve, .init_irq = u300_init_irq, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 4210cb434dbc..a3e0c8692f0d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -6,6 +6,7 @@ config UX500_SOC_COMMON select ARM_GIC select HAS_MTU select ARM_ERRATA_753970 + select ARM_ERRATA_754322 menu "Ux500 SoC" diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index c7e75acfe6c9..ff0a4b5b0a82 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index f26fd76f72b4..15b23e4bd488 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -6,10 +6,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include "pins-db8500.h" diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index 8ce46c0fdfd5..feb5744d98b7 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -4,7 +4,7 @@ * Board data for the U8500 UIB, also known as the New UIB * License terms: GNU General Public License (GPL), version 2 */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> @@ -13,7 +13,6 @@ #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index cd54abaccd96..f67b83dd9010 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -37,6 +37,7 @@ #include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -645,7 +646,7 @@ static void __init mop500_init_machine(void) MACHINE_START(U8500, "ST-Ericsson MOP500 platform") /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ @@ -654,7 +655,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") MACHINE_END MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, @@ -662,7 +663,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") MACHINE_END MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 739fb4c5b160..63c3f8058ffc 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -7,9 +7,9 @@ #include <linux/amba/mmci.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/db5500-regs.h> #include <plat/ste_dma40.h> diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index e58f0f562426..e014aa749b03 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -8,7 +8,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> -#include <linux/gpio.h> #include <linux/irq.h> #include <linux/i2c.h> @@ -17,6 +16,7 @@ #include <plat/pincfg.h> #include <plat/i2c.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/devices.h> @@ -118,7 +118,7 @@ static void __init u5500_init_machine(void) } MACHINE_START(U5500, "ST-Ericsson U5500 Platform") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = u5500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 22705d246fc7..9de1af008094 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -13,7 +13,7 @@ #include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 4598b06c8c55..13e8890a8b8a 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -14,12 +14,12 @@ #include <linux/amba/bus.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/io.h> #include <asm/mach/map.h> #include <asm/pmu.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 13a4ce046ae5..c563e5418d80 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -13,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/amba/bus.h> -#include <plat/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 700fb05ee815..8d74d927d4e2 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -35,7 +35,7 @@ #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_BASE @ no, physical address ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index 3c4cd31ad9f7..7389df911b1a 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -7,6 +7,4 @@ */ #define ARCH_NR_GPIOS 350 -#include <plat/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h deleted file mode 100644 index 2ef697a67006..000000000000 --- a/arch/arm/mach-ux500/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a33df5f4c27a..eb5199102cfa 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -156,12 +156,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "U8500: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot index c7e75acfe6c9..ff0a4b5b0a82 100644 --- a/arch/arm/mach-versatile/Makefile.boot +++ b/arch/arm/mach-versatile/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index eb2cf7dc5c44..d0fbd7f1cb00 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x001F0000 orr \rp, \rp, #0x00001000 orr \rv, \rp, #0xf1000000 @ virtual base diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h index 94ff27678a46..40a8c178f10d 100644 --- a/arch/arm/mach-versatile/include/mach/gpio.h +++ b/arch/arm/mach-versatile/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h deleted file mode 100644 index dacc9d8e4e6a..000000000000 --- a/arch/arm/mach-versatile/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index f8ae64b3eed0..fda4866703cd 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -35,7 +35,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 37c23dfeefb7..feaf9cbe60f6 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -103,7 +103,7 @@ static void __init versatile_pb_init(void) MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 07c2d9c457ec..8630b3d10a4d 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x60008000 + zreladdr-y += 0x60008000 params_phys-y := 0x60000100 initrd_phys-y := 0x60800000 diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index bfd32f52c2db..2b1e836a76ed 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -221,6 +221,12 @@ static void ct_ca9x4_init_cpu_map(void) { int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; ++i) set_cpu_possible(i, true); diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index ea4cbfb90a66..3668cf91d2de 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/system.h> extern volatile int pen_release; @@ -62,13 +63,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * code will have already disabled interrupts */ for (;;) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); + wfi(); if (pen_release == cpu) { /* diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index 050d65e02a42..fd9e6c7ea49f 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -12,7 +12,7 @@ #define DEBUG_LL_UART_OFFSET 0x00009000 - .macro addruart,rp,rv + .macro addruart,rp,rv,tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rv, \rp, #0xf8000000 @ virtual base orr \rp, \rp, #0x10000000 @ physical base diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h index 748bb524ee71..13522d86685e 100644 --- a/arch/arm/mach-vexpress/include/mach/io.h +++ b/arch/arm/mach-vexpress/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff - #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h deleted file mode 100644 index 5b7fcd439d87..000000000000 --- a/arch/arm/mach-vexpress/include/mach/memory.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x60000000) - -#endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9e6b93b1a043..1fafc3244607 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0", @@ -436,7 +443,7 @@ static void __init v2m_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express") - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .map_io = v2m_map_io, .init_early = v2m_init_early, .init_irq = v2m_init_irq, diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot index a8acc4e24902..b79c41cdfdff 100644 --- a/arch/arm/mach-vt8500/Makefile.boot +++ b/arch/arm/mach-vt8500/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x01000000 diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c index 94a261d86bf0..a464c7584411 100644 --- a/arch/arm/mach-vt8500/bv07.c +++ b/arch/arm/mach-vt8500/bv07.c @@ -68,7 +68,7 @@ void __init bv07_init(void) } MACHINE_START(BV07, "Benign BV07 Mini Netbook") - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = vt8500_reserve_mem, .map_io = vt8500_map_io, .init_irq = vt8500_init_irq, diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S index f1191626ad51..ca292f29d4a3 100644 --- a/arch/arm/mach-vt8500/include/mach/debug-macro.S +++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00200000 orr \rv, \rp, #0xf8000000 orr \rp, \rp, #0xd8000000 diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h index 94ff27678a46..40a8c178f10d 100644 --- a/arch/arm/mach-vt8500/include/mach/gpio.h +++ b/arch/arm/mach-vt8500/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h index 9077239f78c9..46181eecf273 100644 --- a/arch/arm/mach-vt8500/include/mach/io.h +++ b/arch/arm/mach-vt8500/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - #define __io(a) __typesafe_io((a) + 0xf0000000) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h deleted file mode 100644 index 175f914eff93..000000000000 --- a/arch/arm/mach-vt8500/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c index e73aadbcafd6..cf910a956080 100644 --- a/arch/arm/mach-vt8500/wm8505_7in.c +++ b/arch/arm/mach-vt8500/wm8505_7in.c @@ -68,7 +68,7 @@ void __init wm8505_7in_init(void) } MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = wm8505_reserve_mem, .map_io = wm8505_map_io, .init_irq = wm8505_init_irq, diff --git a/arch/arm/mach-w90x900/Makefile.boot b/arch/arm/mach-w90x900/Makefile.boot index a057b546b6e5..6c3d421c2d11 100644 --- a/arch/arm/mach-w90x900/Makefile.boot +++ b/arch/arm/mach-w90x900/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 83c56324a472..0a235e502330 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -60,7 +60,7 @@ static DEFINE_CLK(emc, 7); static DEFINE_SUBCLK(rmii, 2); static DEFINE_CLK(usbd, 8); static DEFINE_CLK(usbh, 9); -static DEFINE_CLK(g2d, 10);; +static DEFINE_CLK(g2d, 10); static DEFINE_CLK(pwm, 18); static DEFINE_CLK(ps2, 24); static DEFINE_CLK(kpi, 25); diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h index 034da3e390c9..5385a4203277 100644 --- a/arch/arm/mach-w90x900/include/mach/gpio.h +++ b/arch/arm/mach-w90x900/include/mach/gpio.h @@ -15,16 +15,12 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep static inline int gpio_to_irq(unsigned gpio) { return gpio; } +#define gpio_to_irq gpio_to_irq static inline int irq_to_gpio(unsigned irq) { diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h deleted file mode 100644 index f02905ba7746..000000000000 --- a/arch/arm/mach-w90x900/include/mach/memory.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index 30fccde94fb8..31c109018228 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -34,7 +34,6 @@ static void __init nuc910evb_init(void) MACHINE_START(W90P910EVB, "W90P910EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc910evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc910evb_init, diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index 590c99b96dc1..4062e55a57d8 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -37,7 +37,6 @@ static void __init nuc950evb_init(void) MACHINE_START(W90P950EVB, "W90P950EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc950evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc950evb_init, diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index e09c645d61b6..0ab9995d5b58 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -34,7 +34,6 @@ static void __init nuc960evb_init(void) MACHINE_START(W90N960EVB, "W90N960EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc960evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc960evb_init, diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot index 67039c3e0c48..760a0efe7580 100644 --- a/arch/arm/mach-zynq/Makefile.boot +++ b/arch/arm/mach-zynq/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S index 9f664d5eb81d..3ab0be1f6191 100644 --- a/arch/arm/mach-zynq/include/mach/debug-macro.S +++ b/arch/arm/mach-zynq/include/mach/debug-macro.S @@ -17,7 +17,7 @@ #include <mach/zynq_soc.h> #include <mach/uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual .endm diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h deleted file mode 100644 index 35a92634dcc1..000000000000 --- a/arch/arm/mach-zynq/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/memory.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MEMORY_H__ -#define __MACH_MEMORY_H__ - -#include <asm/sizes.h> - -#define PLAT_PHYS_OFFSET UL(0x0) - -#endif diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index 52162d59407a..2cbf68ef0e83 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -17,7 +17,7 @@ cmp \tmp, # 0x5600 @ Is it ldrsb? orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes tst \tmp, #1 << 11 @ L = 0 -> write - orreq \psr, \psr, #1 << 11 @ yes. + orreq \fsr, \fsr, #1 << 11 @ yes. b do_DataAbort not_thumb: .endm diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index cfbcf8b95599..c335c76e0d88 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -86,16 +86,6 @@ core_param(alignment, ai_usermode, int, 0600); #define UM_FIXUP (1 << 1) #define UM_SIGNAL (1 << 2) -#ifdef CONFIG_PROC_FS -static const char *usermode_action[] = { - "ignored", - "warn", - "fixup", - "fixup+warn", - "signal", - "signal+warn" -}; - /* Return true if and only if the ARMv6 unaligned access model is in use. */ static bool cpu_is_v6_unaligned(void) { @@ -123,6 +113,16 @@ static int safe_usermode(int new_usermode, bool warn) return new_usermode; } +#ifdef CONFIG_PROC_FS +static const char *usermode_action[] = { + "ignored", + "warn", + "fixup", + "fixup+warn", + "signal", + "signal+warn" +}; + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 44c086710d2b..8ac9e9f84790 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,9 +16,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/err.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -26,15 +29,23 @@ #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; -static DEFINE_SPINLOCK(l2x0_lock); +static DEFINE_RAW_SPINLOCK(l2x0_lock); static uint32_t l2x0_way_mask; /* Bitmask of active ways */ static uint32_t l2x0_size; +struct l2x0_regs l2x0_saved_regs; + +struct l2x0_of_data { + void (*setup)(const struct device_node *, __u32 *, __u32 *); + void (*save)(void); + void (*resume)(void); +}; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) - ; + cpu_relax(); } #ifdef CONFIG_CACHE_PL310 @@ -115,9 +126,9 @@ static void l2x0_cache_sync(void) { unsigned long flags; - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void __l2x0_flush_all(void) @@ -134,9 +145,9 @@ static void l2x0_flush_all(void) unsigned long flags; /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); __l2x0_flush_all(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_all(void) @@ -144,11 +155,11 @@ static void l2x0_clean_all(void) unsigned long flags; /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_all(void) @@ -156,13 +167,13 @@ static void l2x0_inv_all(void) unsigned long flags; /* invalidate all ways */ - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); /* Invalidating when L2 is enabled is a nono */ BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_range(unsigned long start, unsigned long end) @@ -170,7 +181,7 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) void __iomem *base = l2x0_base; unsigned long flags; - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); debug_writel(0x03); @@ -195,13 +206,13 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) } if (blk_end < end) { - spin_unlock_irqrestore(&l2x0_lock, flags); - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); } } cache_wait(base + L2X0_INV_LINE_PA, 1); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_range(unsigned long start, unsigned long end) @@ -214,7 +225,7 @@ static void l2x0_clean_range(unsigned long start, unsigned long end) return; } - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); @@ -225,13 +236,13 @@ static void l2x0_clean_range(unsigned long start, unsigned long end) } if (blk_end < end) { - spin_unlock_irqrestore(&l2x0_lock, flags); - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); } } cache_wait(base + L2X0_CLEAN_LINE_PA, 1); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_flush_range(unsigned long start, unsigned long end) @@ -244,7 +255,7 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) return; } - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); @@ -257,24 +268,43 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) debug_writel(0x00); if (blk_end < end) { - spin_unlock_irqrestore(&l2x0_lock, flags); - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); } } cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_disable(void) { unsigned long flags; - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); __l2x0_flush_all(); writel_relaxed(0, l2x0_base + L2X0_CTRL); dsb(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2x0_unlock(__u32 cache_id) +{ + int lockregs; + int i; + + if (cache_id == L2X0_CACHE_ID_PART_L310) + lockregs = 8; + else + /* L210 and unknown types */ + lockregs = 1; + + for (i = 0; i < lockregs; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } } void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) @@ -328,10 +358,14 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) * accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* Make sure that I&D is not locked down when starting */ + l2x0_unlock(cache_id); /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + l2x0_saved_regs.aux_ctrl = aux; + l2x0_inv_all(); /* enable L2X0 */ @@ -351,3 +385,202 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", ways, cache_id, aux, l2x0_size); } + +#ifdef CONFIG_OF +static void __init l2x0_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static void __init pl310_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, + l2x0_base + L2X0_ADDR_FILTER_START); + } +} + +static void __init pl310_save(void) +{ + u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + + L2X0_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + + L2X0_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_START); + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + /* + * From r2p0, there is Prefetch offset/control register + */ + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + + L2X0_PREFETCH_CTRL); + /* + * From r3p0, there is Power control register + */ + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + + L2X0_POWER_CTRL); + } +} + +static void l2x0_resume(void) +{ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore aux ctrl and enable l2 */ + l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); + + writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + + L2X0_AUX_CTRL); + + l2x0_inv_all(); + + writel_relaxed(1, l2x0_base + L2X0_CTRL); + } +} + +static void pl310_resume(void) +{ + u32 l2x0_revision; + + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + l2x0_base + L2X0_ADDR_FILTER_START); + + l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + l2x0_base + L2X0_PREFETCH_CTRL); + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + writel_relaxed(l2x0_saved_regs.pwr_ctrl, + l2x0_base + L2X0_POWER_CTRL); + } + } + + l2x0_resume(); +} + +static const struct l2x0_of_data pl310_data = { + pl310_of_setup, + pl310_save, + pl310_resume, +}; + +static const struct l2x0_of_data l2x0_data = { + l2x0_of_setup, + NULL, + l2x0_resume, +}; + +static const struct of_device_id l2x0_ids[] __initconst = { + { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, + { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, + { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + {} +}; + +int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +{ + struct device_node *np; + struct l2x0_of_data *data; + struct resource res; + + np = of_find_matching_node(NULL, l2x0_ids); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + l2x0_base = ioremap(res.start, resource_size(&res)); + if (!l2x0_base) + return -ENOMEM; + + l2x0_saved_regs.phy_base = res.start; + + data = of_match_node(l2x0_ids, np)->data; + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (data->setup) + data->setup(np, &aux_val, &aux_mask); + } + + if (data->save) + data->save(); + + l2x0_init(l2x0_base, aux_val, aux_mask); + + outer_cache.resume = data->resume; + return 0; +} +#endif diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa3b828..07c4bc8ea0a4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba3cfab..93aac068da94 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -16,7 +16,7 @@ #include <asm/mmu_context.h> #include <asm/tlbflush.h> -static DEFINE_SPINLOCK(cpu_asid_lock); +static DEFINE_RAW_SPINLOCK(cpu_asid_lock); unsigned int cpu_last_asid = ASID_FIRST_VERSION; #ifdef CONFIG_SMP DEFINE_PER_CPU(struct mm_struct *, current_mm); @@ -31,7 +31,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { mm->context.id = 0; - spin_lock_init(&mm->context.id_lock); + raw_spin_lock_init(&mm->context.id_lock); } static void flush_context(void) @@ -58,7 +58,7 @@ static void set_mm_context(struct mm_struct *mm, unsigned int asid) * the broadcast. This function is also called via IPI so the * mm->context.id_lock has to be IRQ-safe. */ - spin_lock_irqsave(&mm->context.id_lock, flags); + raw_spin_lock_irqsave(&mm->context.id_lock, flags); if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) { /* * Old version of ASID found. Set the new one and @@ -67,7 +67,7 @@ static void set_mm_context(struct mm_struct *mm, unsigned int asid) mm->context.id = asid; cpumask_clear(mm_cpumask(mm)); } - spin_unlock_irqrestore(&mm->context.id_lock, flags); + raw_spin_unlock_irqrestore(&mm->context.id_lock, flags); /* * Set the mm_cpumask(mm) bit for the current CPU. @@ -117,7 +117,7 @@ void __new_context(struct mm_struct *mm) { unsigned int asid; - spin_lock(&cpu_asid_lock); + raw_spin_lock(&cpu_asid_lock); #ifdef CONFIG_SMP /* * Check the ASID again, in case the change was broadcast from @@ -125,7 +125,7 @@ void __new_context(struct mm_struct *mm) */ if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) { cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); - spin_unlock(&cpu_asid_lock); + raw_spin_unlock(&cpu_asid_lock); return; } #endif @@ -153,5 +153,5 @@ void __new_context(struct mm_struct *mm) } set_mm_context(mm, asid); - spin_unlock(&cpu_asid_lock); + raw_spin_unlock(&cpu_asid_lock); } diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index b8061519ce77..7d0a8c230342 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -30,7 +30,7 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_MT_MINICACHE) -static DEFINE_SPINLOCK(minicache_lock); +static DEFINE_RAW_SPINLOCK(minicache_lock); /* * ARMv4 mini-dcache optimised copy_user_highpage @@ -76,14 +76,14 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); - spin_lock(&minicache_lock); + raw_spin_lock(&minicache_lock); set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); flush_tlb_kernel_page(0xffff8000); mc_copy_user_page((void *)0xffff8000, kto); - spin_unlock(&minicache_lock); + raw_spin_unlock(&minicache_lock); kunmap_atomic(kto, KM_USER1); } diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 63cca0097130..3d9a1552cef6 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -27,7 +27,7 @@ #define from_address (0xffff8000) #define to_address (0xffffc000) -static DEFINE_SPINLOCK(v6_lock); +static DEFINE_RAW_SPINLOCK(v6_lock); /* * Copy the user page. No aliasing to deal with so we can just @@ -88,7 +88,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, * Now copy the page using the same cache colour as the * pages ultimate destination. */ - spin_lock(&v6_lock); + raw_spin_lock(&v6_lock); set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0); set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0); @@ -101,7 +101,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, copy_page((void *)kto, (void *)kfrom); - spin_unlock(&v6_lock); + raw_spin_unlock(&v6_lock); } /* @@ -121,13 +121,13 @@ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vad * Now clear the page using the same cache colour as * the pages ultimate destination. */ - spin_lock(&v6_lock); + raw_spin_lock(&v6_lock); set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0); flush_tlb_kernel_page(to); clear_page((void *)to); - spin_unlock(&v6_lock); + raw_spin_unlock(&v6_lock); } struct cpu_user_fns v6_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 649bbcd325bf..610c24ced310 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -32,7 +32,7 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_MT_MINICACHE) -static DEFINE_SPINLOCK(minicache_lock); +static DEFINE_RAW_SPINLOCK(minicache_lock); /* * XScale mini-dcache optimised copy_user_highpage @@ -98,14 +98,14 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); - spin_lock(&minicache_lock); + raw_spin_lock(&minicache_lock); set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); flush_tlb_kernel_page(COPYPAGE_MINICACHE); mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); - spin_unlock(&minicache_lock); + raw_spin_unlock(&minicache_lock); kunmap_atomic(kto, KM_USER1); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7c20d2..e4e7f6cba1ab 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -18,12 +18,14 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/highmem.h> +#include <linux/slab.h> #include <asm/memory.h> #include <asm/highmem.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/sizes.h> +#include <asm/mach/arch.h> #include "mm.h" @@ -117,26 +119,36 @@ static void __dma_free_buffer(struct page *page, size_t size) } #ifdef CONFIG_MMU -/* Sanity check size */ -#if (CONSISTENT_DMA_SIZE % SZ_2M) -#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" -#endif -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) -#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT) /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations */ -static pte_t *consistent_pte[NUM_CONSISTENT_PTES]; +static pte_t **consistent_pte; + +#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M + +unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; + +void __init init_consistent_dma_size(unsigned long size) +{ + unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M); + + BUG_ON(consistent_pte); /* Check we're called before DMA region init */ + BUG_ON(base < VMALLOC_END); + + /* Grow region to accommodate specified size */ + if (base < consistent_base) + consistent_base = base; +} #include "vmregion.h" static struct arm_vmregion_head consistent_head = { .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock), .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_start = CONSISTENT_BASE, .vm_end = CONSISTENT_END, }; @@ -155,7 +167,17 @@ static int __init consistent_init(void) pmd_t *pmd; pte_t *pte; int i = 0; - u32 base = CONSISTENT_BASE; + unsigned long base = consistent_base; + unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT; + + consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); + if (!consistent_pte) { + pr_err("%s: no memory\n", __func__); + return -ENOMEM; + } + + pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END); + consistent_head.vm_start = base; do { pgd = pgd_offset(&init_mm, base); @@ -183,7 +205,7 @@ static int __init consistent_init(void) } consistent_pte[i++] = pte; - base += (1 << PGDIR_SHIFT); + base += PMD_SIZE; } while (base < CONSISTENT_END); return ret; @@ -198,7 +220,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) size_t align; int bit; - if (!consistent_pte[0]) { + if (!consistent_pte) { printk(KERN_ERR "%s: not initialised\n", __func__); dump_stack(); return NULL; @@ -324,6 +346,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 3b5ea68acbb8..aa33949fef60 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -20,6 +20,7 @@ #include <linux/highmem.h> #include <linux/perf_event.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 91bca355cd31..04e9a92bb47a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(pfn << PAGE_SHIFT); + return memblock_is_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif @@ -496,6 +496,13 @@ static void __init free_unused_memmap(struct meminfo *mi) */ bank_start = min(bank_start, ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#else + /* + * Align down here since the VM subsystem insists that the + * memmap entries are valid from the bank start aligned to + * MAX_ORDER_NR_PAGES. + */ + bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES); #endif /* * If we had a previous bank, and there is a space @@ -653,9 +660,6 @@ void __init mem_init(void) " ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n" #endif " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" -#ifdef CONFIG_MMU - " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n" -#endif " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n" " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n" #ifdef CONFIG_HIGHMEM @@ -674,9 +678,6 @@ void __init mem_init(void) MLK(ITCM_OFFSET, (unsigned long) itcm_end), #endif MLK(FIXADDR_START, FIXADDR_TOP), -#ifdef CONFIG_MMU - MLM(CONSISTENT_BASE, CONSISTENT_END), -#endif MLM(VMALLOC_START, VMALLOC_END), MLM(PAGE_OFFSET, (unsigned long)high_memory), #ifdef CONFIG_HIGHMEM @@ -699,9 +700,6 @@ void __init mem_init(void) * be detected at build time already. */ #ifdef CONFIG_MMU - BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE); - BUG_ON(VMALLOC_END > CONSISTENT_BASE); - BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR); BUG_ON(TASK_SIZE > MODULES_VADDR); #endif diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ab506272b2d3..bdb248c4f55c 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -289,6 +289,27 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) } EXPORT_SYMBOL(__arm_ioremap); +/* + * Remap an arbitrary physical address space into the kernel virtual + * address space as memory. Needed when the kernel wants to execute + * code in external memory. This is needed for reprogramming source + * clocks that would affect normal memory for example. Please see + * CONFIG_GENERIC_ALLOCATOR for allocating external memory. + */ +void __iomem * +__arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached) +{ + unsigned int mtype; + + if (cached) + mtype = MT_MEMORY; + else + mtype = MT_MEMORY_NONCACHED; + + return __arm_ioremap_caller(phys_addr, size, mtype, + __builtin_return_address(0)); +} + void __iounmap(volatile void __iomem *io_addr) { void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 010566799c80..ad7cce3bc431 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -12,8 +12,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; + pmdval_t prot_l1; + pmdval_t prot_sect; unsigned int domain; }; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 594d677b92c8..dc8c550e6cbd 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -60,7 +60,7 @@ EXPORT_SYMBOL(pgprot_kernel); struct cachepolicy { const char policy[16]; unsigned int cr_mask; - unsigned int pmd; + pmdval_t pmd; pteval_t pte; }; @@ -273,6 +273,14 @@ static struct mem_type mem_types[] = { .prot_l1 = PMD_TYPE_TABLE, .domain = DOMAIN_KERNEL, }, + [MT_MEMORY_SO] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_MT_UNCACHED, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S | + PMD_SECT_UNCACHED | PMD_SECT_XN, + .domain = DOMAIN_KERNEL, + }, }; const struct mem_type *get_mem_type(unsigned int type) @@ -288,7 +296,7 @@ static void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot, kern_pgprot, vecs_pgprot; + pteval_t user_pgprot, kern_pgprot, vecs_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -863,14 +871,14 @@ static inline void prepare_page_table(void) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK; + addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; #endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* @@ -885,10 +893,12 @@ static inline void prepare_page_table(void) * memory bank, up to the end of the vmalloc region. */ for (addr = __phys_to_virt(end); - addr < VMALLOC_END; addr += PGDIR_SIZE) + addr < VMALLOC_END; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); } +#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) + /* * Reserve the special regions of memory */ @@ -898,7 +908,7 @@ void __init arm_mm_memblock_reserve(void) * Reserve the page tables. These are already in use, * and can only be in node 0. */ - memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); + memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE); #ifdef CONFIG_SA1111 /* @@ -926,7 +936,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ vectors_page = early_alloc(PAGE_SIZE); - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + for (addr = VMALLOC_END; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 92bd102e3982..88fb3d9e0640 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -382,28 +382,23 @@ ENTRY(cpu_arm920_set_pte_ext) .equ cpu_arm920_suspend_size, 4 * 3 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) - stmfd sp!, {r4 - r7, lr} + stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ TTB address - mrc p15, 0, r7, c1, c0, 0 @ Control register - stmia r0, {r4 - r7} - ldmfd sp!, {r4 - r7, pc} + mrc p15, 0, r6, c1, c0, 0 @ Control register + stmia r0, {r4 - r6} + ldmfd sp!, {r4 - r6, pc} ENDPROC(cpu_arm920_do_suspend) ENTRY(cpu_arm920_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches - ldmia r0, {r4 - r7} + ldmia r0, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ PID mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ TTB address - mov r0, r7 @ control register - mov r2, r6, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ TTB address + mov r0, r6 @ control register b cpu_resume_mmu ENDPROC(cpu_arm920_do_resume) #endif diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 2bbcf053dffd..9f8fd91f918a 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -397,28 +397,23 @@ ENTRY(cpu_arm926_set_pte_ext) .equ cpu_arm926_suspend_size, 4 * 3 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) - stmfd sp!, {r4 - r7, lr} + stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ TTB address - mrc p15, 0, r7, c1, c0, 0 @ Control register - stmia r0, {r4 - r7} - ldmfd sp!, {r4 - r7, pc} + mrc p15, 0, r6, c1, c0, 0 @ Control register + stmia r0, {r4 - r6} + ldmfd sp!, {r4 - r6, pc} ENDPROC(cpu_arm926_do_suspend) ENTRY(cpu_arm926_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches - ldmia r0, {r4 - r7} + ldmia r0, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ PID mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ TTB address - mov r0, r7 @ control register - mov r2, r6, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ TTB address + mov r0, r6 @ control register b cpu_resume_mmu ENDPROC(cpu_arm926_do_resume) #endif diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 07219c2ae114..7d91545d089b 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -168,34 +168,29 @@ ENTRY(cpu_sa1100_set_pte_ext) mov pc, lr .globl cpu_sa1100_suspend_size -.equ cpu_sa1100_suspend_size, 4*4 +.equ cpu_sa1100_suspend_size, 4 * 3 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_sa1100_do_suspend) - stmfd sp!, {r4 - r7, lr} + stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID - mrc p15, 0, r5, c2, c0, 0 @ translation table base addr - mrc p15, 0, r6, c13, c0, 0 @ PID - mrc p15, 0, r7, c1, c0, 0 @ control reg - stmia r0, {r4 - r7} @ store cp regs - ldmfd sp!, {r4 - r7, pc} + mrc p15, 0, r5, c13, c0, 0 @ PID + mrc p15, 0, r6, c1, c0, 0 @ control reg + stmia r0, {r4 - r6} @ store cp regs + ldmfd sp!, {r4 - r6, pc} ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) - ldmia r0, {r4 - r7} @ load cp regs - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + ldmia r0, {r4 - r6} @ load cp regs + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache + mcr p15, 0, ip, c9, c0, 0 @ invalidate RB + mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID - mcr p15, 0, r5, c2, c0, 0 @ translation table base addr - mcr p15, 0, r6, c13, c0, 0 @ PID - mov r0, r7 @ control register - mov r2, r5, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r5, c13, c0, 0 @ PID + mov r0, r6 @ control register b cpu_resume_mmu ENDPROC(cpu_sa1100_do_resume) #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 219138d2f158..d061d2fa5506 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -128,20 +128,18 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size -.equ cpu_v6_suspend_size, 4 * 8 +.equ cpu_v6_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v6_do_suspend) - stmfd sp!, {r4 - r11, lr} + stmfd sp!, {r4 - r9, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c13, c0, 1 @ Context ID - mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 - mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register - mrc p15, 0, r10, c1, c0, 2 @ co-processor access control - mrc p15, 0, r11, c1, c0, 0 @ control register - stmia r0, {r4 - r11} - ldmfd sp!, {r4- r11, pc} + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1 + mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register + mrc p15, 0, r8, c1, c0, 2 @ co-processor access control + mrc p15, 0, r9, c1, c0, 0 @ control register + stmia r0, {r4 - r9} + ldmfd sp!, {r4- r9, pc} ENDPROC(cpu_v6_do_suspend) ENTRY(cpu_v6_do_resume) @@ -150,25 +148,21 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache mcr p15, 0, ip, c7, c10, 4 @ drain write buffer - ldmia r0, {r4 - r11} + mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID + ldmia r0, {r4 - r9} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c13, c0, 1 @ Context ID - mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 - mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register - mcr p15, 0, r10, c1, c0, 2 @ co-processor access control + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) + ALT_UP(orr r1, r1, #TTB_FLAGS_UP) + mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0 + mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1 + mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register + mcr p15, 0, r8, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB - mov r0, r11 @ control register - mov r2, r7, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, cpu_resume_l1_flags + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_v6_do_resume) -cpu_resume_l1_flags: - ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) - ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) #endif string cpu_v6_name, "ARMv6-compatible processor" @@ -223,6 +217,22 @@ __v6_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them +#ifdef CONFIG_ARM_ERRATA_364296 + /* + * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data + * corruption with hit-under-miss enabled). The conditional code below + * (setting the undocumented bit 31 in the auxiliary control register + * and the FI bit in the control register) disables hit-under-miss + * without putting the processor into full low interrupt latency mode. + */ + ldr r6, =0x4107b362 @ id for ARM1136 r0p2 + mrc p15, 0, r5, c0, c0, 0 @ get processor id + teq r5, r6 @ check for the faulty core + mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg + orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 + mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg + orreq r0, r0, #(1 << 21) @ low interrupt latency configuration +#endif mov pc, lr @ return to head.S:__ret /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a30e78542ccf..2c559ac38142 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin) ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m + THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb mov pc, r0 @@ -216,53 +217,50 @@ ENDPROC(cpu_v7_set_pte_ext) /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 9 -#ifdef CONFIG_PM_SLEEP +.equ cpu_v7_suspend_size, 4 * 7 +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) - stmfd sp!, {r4 - r11, lr} + stmfd sp!, {r4 - r10, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c13, c0, 1 @ Context ID - mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID - stmia r0!, {r4 - r6} + mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID + stmia r0!, {r4 - r5} mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ TTB 0 - mrc p15, 0, r8, c2, c0, 1 @ TTB 1 - mrc p15, 0, r9, c1, c0, 0 @ Control register - mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r6 - r11} - ldmfd sp!, {r4 - r11, pc} + mrc p15, 0, r7, c2, c0, 1 @ TTB 1 + mrc p15, 0, r8, c1, c0, 0 @ Control register + mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control + stmia r0, {r6 - r10} + ldmfd sp!, {r4 - r10, pc} ENDPROC(cpu_v7_do_suspend) ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache - ldmia r0!, {r4 - r6} + mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID + ldmia r0!, {r4 - r5} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c13, c0, 1 @ Context ID - mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID - ldmia r0, {r6 - r11} + mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID + ldmia r0, {r6 - r10} mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ TTB 0 - mcr p15, 0, r8, c2, c0, 1 @ TTB 1 + ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) + ALT_UP(orr r1, r1, #TTB_FLAGS_UP) + mcr p15, 0, r1, c2, c0, 0 @ TTB 0 + mcr p15, 0, r7, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control + mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register + teq r4, r9 @ Is it already set? + mcrne p15, 0, r9, c1, c0, 1 @ No, so write it + mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb - mov r0, r9 @ control register - mov r2, r7, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, cpu_resume_l1_flags + dsb + mov r0, r8 @ control register b cpu_resume_mmu ENDPROC(cpu_v7_do_resume) -cpu_resume_l1_flags: - ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) - ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) #endif __CPUINIT diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 28c72a2006a1..abf0507a08ae 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,24 +406,23 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 8 +.equ cpu_xsc3_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) - stmfd sp!, {r4 - r10, lr} + stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c2, c0, 0 @ translation table base addr - mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg - mrc p15, 0, r10, c1, c0, 0 @ control reg + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs - ldmia sp!, {r4 - r10, pc} + stmia r0, {r4 - r9} @ store cp regs + ldmia sp!, {r4 - r9, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer @@ -433,15 +432,10 @@ ENTRY(cpu_xsc3_do_resume) mcr p15, 0, r5, c15, c1, 0 @ CP access reg mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID - mcr p15, 0, r8, c2, c0, 0 @ translation table base addr - mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg - - @ temporarily map resume_turn_on_mmu into the page table, - @ otherwise prefetch abort occurs after MMU is turned on - mov r0, r10 @ control register - mov r2, r8, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =0x542e @ section flags + orr r1, r1, #0x18 @ cache the page table in L2 + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xsc3_do_resume) #endif diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index fbc06e55b87a..3277904bebaf 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -520,24 +520,23 @@ ENTRY(cpu_xscale_set_pte_ext) .align .globl cpu_xscale_suspend_size -.equ cpu_xscale_suspend_size, 4 * 7 +.equ cpu_xscale_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xscale_do_suspend) - stmfd sp!, {r4 - r10, lr} + stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c2, c0, 0 @ translation table base addr - mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg - mrc p15, 0, r10, c1, c0, 0 @ control reg + mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r4 - r10} @ store cp regs - ldmfd sp!, {r4 - r10, pc} + stmia r0, {r4 - r9} @ store cp regs + ldmfd sp!, {r4 - r9, pc} ENDPROC(cpu_xscale_do_suspend) ENTRY(cpu_xscale_do_resume) - ldmia r0, {r4 - r10} @ load cp regs + ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB @@ -545,13 +544,9 @@ ENTRY(cpu_xscale_do_resume) mcr p15, 0, r5, c15, c1, 0 @ CP access reg mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID - mcr p15, 0, r8, c2, c0, 0 @ translation table base addr - mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg - mov r0, r10 @ control register - mov r2, r8, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xscale_do_resume) #endif diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index a5353fc0793f..4c8fdbcc9467 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -39,7 +39,7 @@ config ARCH_MX503 select ARCH_MX50_SUPPORTED select ARCH_MX53_SUPPORTED help - This enables support for machines using Freescale's i.MX50 and i.MX51 + This enables support for machines using Freescale's i.MX50 and i.MX53 processors. config ARCH_MX51 diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index 0d6ed31bdbf2..a34b2ae895f2 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -37,59 +37,6 @@ int __init mxc_register_device(struct platform_device *pdev, void *data) return ret; } -struct platform_device *__init imx_add_platform_device_dmamask( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask) -{ - int ret = -ENOMEM; - struct platform_device *pdev; - - pdev = platform_device_alloc(name, id); - if (!pdev) - goto err; - - if (dmamask) { - /* - * This memory isn't freed when the device is put, - * I don't have a nice idea for that though. Conceptually - * dma_mask in struct device should not be a pointer. - * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 - */ - pdev->dev.dma_mask = - kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) - /* ret is still -ENOMEM; */ - goto err; - - *pdev->dev.dma_mask = dmamask; - pdev->dev.coherent_dma_mask = dmamask; - } - - if (res) { - ret = platform_device_add_resources(pdev, res, num_resources); - if (ret) - goto err; - } - - if (data) { - ret = platform_device_add_data(pdev, data, size_data); - if (ret) - goto err; - } - - ret = platform_device_add(pdev); - if (ret) { -err: - if (dmamask) - kfree(pdev->dev.dma_mask); - platform_device_put(pdev); - return ERR_PTR(ret); - } - - return pdev; -} - struct device mxc_aips_bus = { .init_name = "mxc_aips", .parent = &platform_bus, diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index e4dde91f0231..a3045937fc2f 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -54,7 +54,7 @@ #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual .endm diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 524538aabc4b..543525d76a60 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -14,10 +14,22 @@ extern struct device mxc_aips_bus; extern struct device mxc_ahb_bus; -struct platform_device *imx_add_platform_device_dmamask( +static inline struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask); + const void *data, size_t size_data, u64 dmamask) +{ + struct platform_device_info pdevinfo = { + .name = name, + .id = id, + .res = res, + .num_res = num_resources, + .data = data, + .size_data = size_data, + .dma_mask = dmamask, + }; + return platform_device_register_full(&pdevinfo); +} static inline struct platform_device *imx_add_platform_device( const char *name, int id, diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 31c820c1b796..3e1ffc8b8f0c 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -21,18 +21,12 @@ #include <linux/spinlock.h> #include <mach/hardware.h> -#include <asm-generic/gpio.h> /* There's a off-by-one betweem the gpio bank number and the gpiochip */ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h deleted file mode 100644 index 11be5cdbdd1a..000000000000 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MEMORY_H__ -#define __ASM_ARCH_MXC_MEMORY_H__ - -#define MX1_PHYS_OFFSET UL(0x08000000) -#define MX21_PHYS_OFFSET UL(0xc0000000) -#define MX25_PHYS_OFFSET UL(0x80000000) -#define MX27_PHYS_OFFSET UL(0xa0000000) -#define MX3x_PHYS_OFFSET UL(0x80000000) -#define MX50_PHYS_OFFSET UL(0x70000000) -#define MX51_PHYS_OFFSET UL(0x90000000) -#define MX53_PHYS_OFFSET UL(0x70000000) - -#if !defined(CONFIG_RUNTIME_PHYS_OFFSET) -# if defined CONFIG_ARCH_MX1 -# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET -# elif defined CONFIG_MACH_MX21 -# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX25 -# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET -# elif defined CONFIG_MACH_MX27 -# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX3 -# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX50 -# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX51 -# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX53 -# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET -# endif -#endif - -#if defined(CONFIG_MX3_VIDEO) -/* - * Increase size of DMA-consistent memory region. - * This is required for mx3 camera driver to capture at least two QXGA frames. - */ -#define CONSISTENT_DMA_SIZE SZ_8M - -#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT) -/* - * Increase size of DMA-consistent memory region. - * This is required for i.MX camera driver to capture at least four VGA frames. - */ -#define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */ - -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h index d5d7e651269c..3ba4d8f8073b 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h @@ -9,20 +9,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_GPIO_H -#define __ASM_PLAT_GPIO_H -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +#ifndef __PLAT_NOMADIK_GPIO +#define __PLAT_NOMADIK_GPIO /* * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving @@ -93,4 +82,4 @@ struct nmk_gpio_platform_data { bool supports_sleepmode; }; -#endif /* __ASM_PLAT_GPIO_H */ +#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index bb8f4a6b3e37..6f4edd3408c2 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,6 +14,8 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select HAVE_IDE + select NEED_MACH_MEMORY_H help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 923c9621096b..caa1f7b6cc21 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,7 +18,6 @@ #include <mach/hardware.h> #include <plat/board.h> -#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index fc05b1022602..61a1ec2a6af4 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> @@ -19,7 +19,6 @@ #include <asm/mach-types.h> #include <plat/fpga.h> -#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index ea28f98d5d6a..c46c47afa090 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -8,7 +8,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +24,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include <plat/menelaus.h> #include <plat/mcbsp.h> #include <plat/omap44xx.h> @@ -74,41 +73,6 @@ void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ - defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) - -static struct resource mcpdm_resources[] = { - { - .name = "mcpdm_mem", - .start = OMAP44XX_MCPDM_BASE, - .end = OMAP44XX_MCPDM_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, - { - .name = "mcpdm_irq", - .start = OMAP44XX_IRQ_MCPDM, - .end = OMAP44XX_IRQ_MCPDM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_mcpdm_device = { - .name = "omap-mcpdm", - .id = -1, - .num_resources = ARRAY_SIZE(mcpdm_resources), - .resource = mcpdm_resources, -}; - -static void omap_init_mcpdm(void) -{ - (void) platform_device_register(&omap_mcpdm_device); -} -#else -static inline void omap_init_mcpdm(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) @@ -291,7 +255,6 @@ static int __init omap_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_rng(); - omap_init_mcpdm(); omap_init_uwire(); return 0; } diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 91e8de3db085..9e86ee0aed0a 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -222,26 +222,6 @@ extern void omap_gpio_restore_context(void); #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { int tmp; diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index d72ec85c97e6..ebe67ea8d068 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -309,6 +309,8 @@ extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); void omap_iounmap(volatile void __iomem *addr); +extern void __init omap_init_consistent_dma_size(void); + #endif #endif diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h deleted file mode 100644 index e6720aa2d553..000000000000 --- a/arch/arm/plat-omap/include/plat/memory.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PLAT_PHYS_OFFSET UL(0x10000000) -#else -#define PLAT_PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) - -#define __arch_pfn_to_dma(dev, pfn) \ - ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ - if (is_lbus_device(dev)) \ - __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ - __dma; }) - -#define __arch_dma_to_pfn(dev, addr) \ - ({ dma_addr_t __dma = addr; \ - if (is_lbus_device(dev)) \ - __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ - __phys_to_pfn(__dma); \ - }) - -#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __phys_to_virt(addr)); }) - -#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ - (dma_addr_t) (is_lbus_device(dev) ? \ - virt_to_lbus(__addr) : \ - __virt_to_phys(__addr)); }) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -/* Override the ARM default */ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - -#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) -#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE -#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 -#endif - -#define CONSISTENT_DMA_SIZE \ - (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) - -#endif - -#endif - diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index c7b874186c27..94cf70afb236 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -31,7 +31,24 @@ #define OMAP_MMC_MAX_SLOTS 2 -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1) +/* + * struct omap_mmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) struct omap_mmc_dev_attr { u8 flags; diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index de3b10c18127..1ab9fd6abe6d 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -16,8 +16,8 @@ #include <linux/init.h> /* - * Memory entry used for the DEBUG_LL UART configuration. See also - * uncompress.h and debug-macro.S. + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. * * Note that using a memory location for storing the UART configuration * has at least two limitations: @@ -27,7 +27,7 @@ * 2. We assume printascii is called at least once before paging_init, * and addruart has a chance to read OMAP_UART_INFO */ -#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) +#define OMAP_UART_INFO_OFS 0x3ffc /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index a067484cc4a2..2f472e989ec6 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -36,7 +36,13 @@ int uart_shift; */ static void set_omap_uart_info(unsigned char port) { - *(volatile u32 *)OMAP_UART_INFO = port; + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; } static void putc(int c) diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index f1ecfa9fc61d..e9b0e23edd0a 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> #include <plat/omap7xx.h> #include <plat/omap1510.h> @@ -139,3 +140,10 @@ void omap_iounmap(volatile void __iomem *addr) __iounmap(addr); } EXPORT_SYMBOL(omap_iounmap); + +void __init omap_init_consistent_dma_size(void) +{ +#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); +#endif +} diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index b6b409744954..02609eee0562 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -615,6 +615,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { @@ -622,7 +625,8 @@ static struct dev_pm_domain omap_device_pm_domain = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, _od_runtime_idle) USE_PLATFORM_PM_SLEEP_OPS - SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq) + .suspend_noirq = _od_suspend_noirq, + .resume_noirq = _od_resume_noirq, } }; diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 3075b9fdde83..3abf30428bee 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -12,15 +12,7 @@ #define __PLAT_GPIO_H #include <linux/init.h> -#include <asm-generic/gpio.h> - -/* - * GENERIC_GPIO primitives. - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +#include <linux/types.h> /* * Orion-specific GPIO API extensions. diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 3aca5ba0f876..f302d048392d 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -4,7 +4,6 @@ obj-y := dma.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c deleted file mode 100644 index a11dc3670505..000000000000 --- a/arch/arm/plat-pxa/gpio.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * linux/arch/arm/plat-pxa/gpio.c - * - * Generic PXA GPIO handling - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> -#include <linux/slab.h> - -#include <mach/gpio.h> - -int pxa_last_gpio; - -struct pxa_gpio_chip { - struct gpio_chip chip; - void __iomem *regbase; - char label[10]; - - unsigned long irq_mask; - unsigned long irq_edge_rise; - unsigned long irq_edge_fall; - -#ifdef CONFIG_PM - unsigned long saved_gplr; - unsigned long saved_gpdr; - unsigned long saved_grer; - unsigned long saved_gfer; -#endif -}; - -static DEFINE_SPINLOCK(gpio_lock); -static struct pxa_gpio_chip *pxa_gpio_chips; - -#define for_each_gpio_chip(i, c) \ - for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) - -static inline void __iomem *gpio_chip_base(struct gpio_chip *c) -{ - return container_of(c, struct pxa_gpio_chip, chip)->regbase; -} - -static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) -{ - return &pxa_gpio_chips[gpio_to_bank(gpio)]; -} - -static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - void __iomem *base = gpio_chip_base(chip); - uint32_t value, mask = 1 << offset; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - value = __raw_readl(base + GPDR_OFFSET); - if (__gpio_is_inverted(chip->base + offset)) - value |= mask; - else - value &= ~mask; - __raw_writel(value, base + GPDR_OFFSET); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} - -static int pxa_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - void __iomem *base = gpio_chip_base(chip); - uint32_t tmp, mask = 1 << offset; - unsigned long flags; - - __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET)); - - spin_lock_irqsave(&gpio_lock, flags); - - tmp = __raw_readl(base + GPDR_OFFSET); - if (__gpio_is_inverted(chip->base + offset)) - tmp &= ~mask; - else - tmp |= mask; - __raw_writel(tmp, base + GPDR_OFFSET); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} - -static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset); -} - -static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - __raw_writel(1 << offset, gpio_chip_base(chip) + - (value ? GPSR_OFFSET : GPCR_OFFSET)); -} - -static int __init pxa_init_gpio_chip(int gpio_end) -{ - int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; - struct pxa_gpio_chip *chips; - - chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); - if (chips == NULL) { - pr_err("%s: failed to allocate GPIO chips\n", __func__); - return -ENOMEM; - } - - for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { - struct gpio_chip *c = &chips[i].chip; - - sprintf(chips[i].label, "gpio-%d", i); - chips[i].regbase = (void __iomem *)GPIO_BANK(i); - - c->base = gpio; - c->label = chips[i].label; - - c->direction_input = pxa_gpio_direction_input; - c->direction_output = pxa_gpio_direction_output; - c->get = pxa_gpio_get; - c->set = pxa_gpio_set; - - /* number of GPIOs on last bank may be less than 32 */ - c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; - gpiochip_add(c); - } - pxa_gpio_chips = chips; - return 0; -} - -/* Update only those GRERx and GFERx edge detection register bits if those - * bits are set in c->irq_mask - */ -static inline void update_edge_detect(struct pxa_gpio_chip *c) -{ - uint32_t grer, gfer; - - grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; - gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; - grer |= c->irq_edge_rise & c->irq_mask; - gfer |= c->irq_edge_fall & c->irq_mask; - __raw_writel(grer, c->regbase + GRER_OFFSET); - __raw_writel(gfer, c->regbase + GFER_OFFSET); -} - -static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - struct pxa_gpio_chip *c; - int gpio = irq_to_gpio(d->irq); - unsigned long gpdr, mask = GPIO_bit(gpio); - - c = gpio_to_pxachip(gpio); - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - * GPIOs set to alternate function or to output during probe - */ - if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio)) - return 0; - - if (__gpio_is_occupied(gpio)) - return 0; - - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - gpdr = __raw_readl(c->regbase + GPDR_OFFSET); - - if (__gpio_is_inverted(gpio)) - __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET); - else - __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET); - - if (type & IRQ_TYPE_EDGE_RISING) - c->irq_edge_rise |= mask; - else - c->irq_edge_rise &= ~mask; - - if (type & IRQ_TYPE_EDGE_FALLING) - c->irq_edge_fall |= mask; - else - c->irq_edge_fall &= ~mask; - - update_edge_detect(c); - - pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio, - ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), - ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); - return 0; -} - -static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) -{ - struct pxa_gpio_chip *c; - int loop, gpio, gpio_base, n; - unsigned long gedr; - - do { - loop = 0; - for_each_gpio_chip(gpio, c) { - gpio_base = c->chip.base; - - gedr = __raw_readl(c->regbase + GEDR_OFFSET); - gedr = gedr & c->irq_mask; - __raw_writel(gedr, c->regbase + GEDR_OFFSET); - - n = find_first_bit(&gedr, BITS_PER_LONG); - while (n < BITS_PER_LONG) { - loop = 1; - - generic_handle_irq(gpio_to_irq(gpio_base + n)); - n = find_next_bit(&gedr, BITS_PER_LONG, n + 1); - } - } - } while (loop); -} - -static void pxa_ack_muxed_gpio(struct irq_data *d) -{ - int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); - - __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); -} - -static void pxa_mask_muxed_gpio(struct irq_data *d) -{ - int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); - uint32_t grer, gfer; - - c->irq_mask &= ~GPIO_bit(gpio); - - grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio); - gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio); - __raw_writel(grer, c->regbase + GRER_OFFSET); - __raw_writel(gfer, c->regbase + GFER_OFFSET); -} - -static void pxa_unmask_muxed_gpio(struct irq_data *d) -{ - int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); - - c->irq_mask |= GPIO_bit(gpio); - update_edge_detect(c); -} - -static struct irq_chip pxa_muxed_gpio_chip = { - .name = "GPIO", - .irq_ack = pxa_ack_muxed_gpio, - .irq_mask = pxa_mask_muxed_gpio, - .irq_unmask = pxa_unmask_muxed_gpio, - .irq_set_type = pxa_gpio_irq_type, -}; - -void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn) -{ - struct pxa_gpio_chip *c; - int gpio, irq; - - pxa_last_gpio = end; - - /* Initialize GPIO chips */ - pxa_init_gpio_chip(end); - - /* clear all GPIO edge detects */ - for_each_gpio_chip(gpio, c) { - __raw_writel(0, c->regbase + GFER_OFFSET); - __raw_writel(0, c->regbase + GRER_OFFSET); - __raw_writel(~0,c->regbase + GEDR_OFFSET); - } - - for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) { - irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Install handler for GPIO>=2 edge detect interrupts */ - irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler); - pxa_muxed_gpio_chip.irq_set_wake = fn; -} - -#ifdef CONFIG_PM -static int pxa_gpio_suspend(void) -{ - struct pxa_gpio_chip *c; - int gpio; - - for_each_gpio_chip(gpio, c) { - c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET); - c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET); - c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET); - c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET); - - /* Clear GPIO transition detect bits */ - __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET); - } - return 0; -} - -static void pxa_gpio_resume(void) -{ - struct pxa_gpio_chip *c; - int gpio; - - for_each_gpio_chip(gpio, c) { - /* restore level with set/clear */ - __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET); - __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET); - - __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET); - __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET); - __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET); - } -} -#else -#define pxa_gpio_suspend NULL -#define pxa_gpio_resume NULL -#endif - -struct syscore_ops pxa_gpio_syscore_ops = { - .suspend = pxa_gpio_suspend, - .resume = pxa_gpio_resume, -}; diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h new file mode 100644 index 000000000000..b6390beff323 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h @@ -0,0 +1,44 @@ +#ifndef __PLAT_PXA_GPIO_H +#define __PLAT_PXA_GPIO_H + +struct irq_data; + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ + +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); + +extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); + +#endif /* __PLAT_PXA_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h index 1ddd2b97a729..258f77210b02 100644 --- a/arch/arm/plat-pxa/include/plat/gpio.h +++ b/arch/arm/plat-pxa/include/plat/gpio.h @@ -1,35 +1,10 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H -struct irq_data; +#define __ARM_GPIOLIB_COMPLEX -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 +/* The individual machine provides register offsets and NR_BUILTIN_GPIO */ +#include <mach/gpio-pxa.h> static inline int gpio_get_value(unsigned gpio) { @@ -52,13 +27,4 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_cansleep __gpio_cansleep -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); #endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9843c954c042..9a197e55f669 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -22,7 +22,6 @@ config PLAT_S5P select PLAT_SAMSUNG select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER - select SAMSUNG_IRQ_UART help Base platform code for Samsung's S5P series SoC. diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 02af235298e2..5f84a3f13ef9 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk) if (IS_ERR(pclk)) return -EINVAL; - rate = pclk->ops->get_rate(clk); + rate = pclk->ops->get_rate(pclk); clk_put(pclk); return rate; diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index afaf87fdb93e..c9308db36183 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -32,20 +32,10 @@ static struct resource s5p_uart0_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX0, - .end = IRQ_S5P_UART_RX0, + .start = IRQ_UART0, + .end = IRQ_UART0, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = IRQ_S5P_UART_TX0, - .end = IRQ_S5P_UART_TX0, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR0, - .end = IRQ_S5P_UART_ERR0, - .flags = IORESOURCE_IRQ, - } }; static struct resource s5p_uart1_resource[] = { @@ -55,18 +45,8 @@ static struct resource s5p_uart1_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX1, - .end = IRQ_S5P_UART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX1, - .end = IRQ_S5P_UART_TX1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR1, - .end = IRQ_S5P_UART_ERR1, + .start = IRQ_UART1, + .end = IRQ_UART1, .flags = IORESOURCE_IRQ, }, }; @@ -78,18 +58,8 @@ static struct resource s5p_uart2_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX2, - .end = IRQ_S5P_UART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX2, - .end = IRQ_S5P_UART_TX2, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR2, - .end = IRQ_S5P_UART_ERR2, + .start = IRQ_UART2, + .end = IRQ_UART2, .flags = IORESOURCE_IRQ, }, }; @@ -102,18 +72,8 @@ static struct resource s5p_uart3_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX3, - .end = IRQ_S5P_UART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX3, - .end = IRQ_S5P_UART_TX3, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR3, - .end = IRQ_S5P_UART_ERR3, + .start = IRQ_UART3, + .end = IRQ_UART3, .flags = IORESOURCE_IRQ, }, #endif @@ -127,18 +87,8 @@ static struct resource s5p_uart4_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX4, - .end = IRQ_S5P_UART_RX4, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX4, - .end = IRQ_S5P_UART_TX4, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR4, - .end = IRQ_S5P_UART_ERR4, + .start = IRQ_UART4, + .end = IRQ_UART4, .flags = IORESOURCE_IRQ, }, #endif @@ -152,18 +102,8 @@ static struct resource s5p_uart5_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX5, - .end = IRQ_S5P_UART_RX5, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX5, - .end = IRQ_S5P_UART_TX5, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR5, - .end = IRQ_S5P_UART_ERR5, + .start = IRQ_UART5, + .end = IRQ_UART5, .flags = IORESOURCE_IRQ, }, #endif diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index ba9121c60a2a..144dbfc6506d 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -37,41 +37,6 @@ #define IRQ_VIC1_BASE S5P_VIC1_BASE #define IRQ_VIC2_BASE S5P_VIC2_BASE -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S5P_UART_BASE0 (16) -#define IRQ_S5P_UART_BASE1 (20) -#define IRQ_S5P_UART_BASE2 (24) -#define IRQ_S5P_UART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) - -#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR) - -/* S3C compatibilty defines */ -#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0 -#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1 -#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2 -#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3 - /* VIC based IRQs */ #define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 327ab9f662e8..c65eb791d1bb 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -23,6 +23,8 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> +#include <asm/mach/irq.h> + #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) #define CON_OFFSET 0x700 @@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) int group, pend_offset, mask_offset; unsigned int pend, mask; + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + for (group = 0; group < bank->nr_groups; group++) { struct s3c_gpio_chip *chip = bank->chips[group]; if (!chip) @@ -102,23 +107,25 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) pend &= ~BIT(offset); } } + chained_irq_exit(chip, desc); } static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; @@ -156,9 +163,9 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p_gpioint_set_type, - ct->regs.ack = PEND_OFFSET + REG_OFFSET(chip->group); - ct->regs.mask = MASK_OFFSET + REG_OFFSET(chip->group); - ct->regs.type = CON_OFFSET + REG_OFFSET(chip->group); + ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start); + ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start); + ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start); irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST | IRQ_NOPROBE, 0); diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c index a97c08957f49..afdaa1082b9f 100644 --- a/arch/arm/plat-s5p/irq.c +++ b/arch/arm/plat-s5p/irq.c @@ -17,42 +17,10 @@ #include <asm/hardware/vic.h> -#include <linux/serial_core.h> #include <mach/map.h> #include <plat/regs-timer.h> -#include <plat/regs-serial.h> #include <plat/cpu.h> #include <plat/irq-vic-timer.h> -#include <plat/irq-uart.h> - -/* - * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = S5P_VA_UART0, - .base_irq = IRQ_S5P_UART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = S5P_VA_UART1, - .base_irq = IRQ_S5P_UART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = S5P_VA_UART2, - .base_irq = IRQ_S5P_UART_BASE2, - .parent_irq = IRQ_UART2, - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [3] = { - .regs = S5P_VA_UART3, - .base_irq = IRQ_S5P_UART_BASE3, - .parent_irq = IRQ_UART3, - }, -#endif -}; void __init s5p_init_irq(u32 *vic, u32 num_vic) { @@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic) #endif s3c_init_vic_timer_irq(5, IRQ_TIMER0); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index b3e10659e4b8..dffa37bc4a0b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER help Internal configuration to build the VIC timer interrupt code. -config SAMSUNG_IRQ_UART - bool - help - Internal configuration to build the IRQ UART demux code. - # options for gpio configuration support config SAMSUNG_GPIOLIB_4BIT diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 853764ba8cc5..1105922342fe 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -21,7 +21,6 @@ obj-y += dev-asocdma.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o -obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o # ADC diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c42670bd1..3b4451979d1b 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h index 51d8da846a62..ad530c78fe8c 100644 --- a/arch/arm/plat-samsung/include/plat/backlight.h +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -20,7 +20,7 @@ struct samsung_bl_gpio_info { int func; }; -extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, struct platform_pwm_backlight_data *bl_data); #endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38a86fb..73c66d4d10fa 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index bac36fa3becb..720734847027 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -186,6 +186,11 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 +#define S3C64XX_UINTM_RXD (0) +#define S3C64XX_UINTM_TXD (2) +#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) +#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) + /* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a0..40dbb2b0ae22 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c deleted file mode 100644 index 3014c7226bd1..000000000000 --- a/arch/arm/plat-samsung/irq-uart.c +++ /dev/null @@ -1,96 +0,0 @@ -/* arch/arm/plat-samsung/irq-uart.c - * originally part of arch/arm/plat-s3c64xx/irq.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung- UART Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/serial_core.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <plat/irq-uart.h> -#include <plat/regs-serial.h> -#include <plat/cpu.h> - -/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) -{ - struct s3c_uart_irq *uirq = desc->irq_data.handler_data; - struct irq_chip *chip = irq_get_chip(irq); - u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); - int base = uirq->base_irq; - - chained_irq_enter(chip, desc); - - if (pend & (1 << 0)) - generic_handle_irq(base); - if (pend & (1 << 1)) - generic_handle_irq(base + 1); - if (pend & (1 << 2)) - generic_handle_irq(base + 2); - if (pend & (1 << 3)) - generic_handle_irq(base + 3); - - chained_irq_exit(chip, desc); -} - -static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) -{ - void __iomem *reg_base = uirq->regs; - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - /* mask all interrupts at the start. */ - __raw_writel(0xf, reg_base + S3C64XX_UINTM); - - gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, - handle_level_irq); - - if (!gc) { - pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", - __func__, uirq->base_irq); - return; - } - - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->regs.ack = S3C64XX_UINTP; - ct->regs.mask = S3C64XX_UINTM; - irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - - irq_set_handler_data(uirq->parent_irq, uirq); - irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); -} - -/** - * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing - * @irq: The interrupt data for registering - * @nr_irqs: The number of interrupt descriptions in @irq. - * - * Register the UART interrupts specified by @irq including the demuxing - * routines. This supports the S3C6400 and newer style of devices. - */ -void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs) -{ - for (; nr_irqs > 0; nr_irqs--, irq++) - s3c_init_uart_irq(irq); -} diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f714d060370d..51583cd30164 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 8501bbf2c092..02b160a1ec9b 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -14,7 +14,7 @@ #include <linux/amba/serial.h> #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h index b857c91257dd..40a8c178f10d 100644 --- a/arch/arm/plat-spear/include/plat/gpio.h +++ b/arch/arm/plat-spear/include/plat/gpio.h @@ -1,24 +1 @@ -/* - * arch/arm/plat-spear/include/plat/gpio.h - * - * GPIO macros for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __PLAT_GPIO_H */ +/* empty */ diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h deleted file mode 100644 index 7e3599e1104e..000000000000 --- a/arch/arm/plat-spear/include/plat/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/memory.h - * - * Memory map for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_MEMORY_H -#define __PLAT_MEMORY_H - -/* Physical DRAM offset */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S index 7662f736e42b..cf17d04ec30d 100644 --- a/arch/arm/plat-tcc/include/mach/debug-macro.S +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -9,7 +9,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp moveq \rp, #0x90000000 @ physical base address movne \rv, #0xF1000000 @ virtual base orr \rp, \rp, #0x00007000 @ UART0 diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h deleted file mode 100644 index 28a6e0cd13b3..000000000000 --- a/arch/arm/plat-tcc/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2008-2009 Telechips - * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL v2. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fff68d0d521b..5bdeef969847 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,10 +12,9 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# XXX: This is a cut-down version of the file; it contains only machines that -# XXX: are in mainline or have been submitted to the machine database within -# XXX: the last 12 months. If your entry is missing please email rmk at -# XXX: <linux@arm.linux.org.uk> +# This is a cut-down version of the file; it contains only machines that +# are merged into mainline or have been edited in the machine database +# within the last 12 months. References to machine_is_NAME() do not count! # # Last update: Sat May 7 08:48:24 2011 # @@ -65,6 +64,7 @@ h7201 ARCH_H7201 H7201 161 h7202 ARCH_H7202 H7202 162 iq80321 ARCH_IQ80321 IQ80321 169 ks8695 ARCH_KS8695 KS8695 180 +karo ARCH_KARO KARO 190 smdk2410 ARCH_SMDK2410 SMDK2410 193 ceiva ARCH_CEIVA CEIVA 200 voiceblue MACH_VOICEBLUE VOICEBLUE 218 @@ -188,6 +188,7 @@ omap_2430sdp MACH_OMAP_2430SDP OMAP_2430SDP 900 davinci_evm MACH_DAVINCI_EVM DAVINCI_EVM 901 palmz72 MACH_PALMZ72 PALMZ72 904 nxdb500 MACH_NXDB500 NXDB500 905 +apf9328 MACH_APF9328 APF9328 906 palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 @@ -271,10 +272,12 @@ pcm038 MACH_PCM038 PCM038 1551 ts_x09 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 +vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584 linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585 e350 MACH_E350 E350 1596 ts409 MACH_TS409 TS409 1601 +rsi_ews MACH_RSI_EWS RSI_EWS 1609 cm_x300 MACH_CM_X300 CM_X300 1616 at91sam9g20ek MACH_AT91SAM9G20EK AT91SAM9G20EK 1624 smdk6410 MACH_SMDK6410 SMDK6410 1626 @@ -331,6 +334,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 +usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841 mxlads MACH_MXLADS MXLADS 1851 linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858 afeb9260 MACH_AFEB9260 AFEB9260 1859 @@ -351,7 +355,7 @@ centro MACH_CENTRO CENTRO 1944 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975 acs5k MACH_ACS5K ACS5K 1982 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 @@ -369,6 +373,7 @@ pcm043 MACH_PCM043 PCM043 2072 sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 +tx37 MACH_TX37 TX37 2127 rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138 ts219 MACH_TS219 TS219 2139 @@ -379,6 +384,7 @@ omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 btmavb101 MACH_BTMAVB101 BTMAVB101 2172 btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +tx25 MACH_TX25 TX25 2177 omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 anw6410 MACH_ANW6410 ANW6410 2183 imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 @@ -423,6 +429,7 @@ raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413 raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414 raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415 tnetv107x MACH_TNETV107X TNETV107X 2418 +mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 smdkv210 MACH_SMDKV210 SMDKV210 2456 omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 @@ -433,14 +440,17 @@ omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 ts41x MACH_TS41X TS41X 2502 phy3250 MACH_PHY3250 PHY3250 2511 mini6410 MACH_MINI6410 MINI6410 2520 +tx51 MACH_TX51 TX51 2529 mx28evk MACH_MX28EVK MX28EVK 2531 smartq5 MACH_SMARTQ5 SMARTQ5 2534 davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 riot_x37 MACH_RIOT_X37 RIOT_X37 2578 +pca101 MACH_PCA101 PCA101 2595 capc7117 MACH_CAPC7117 CAPC7117 2612 icontrol MACH_ICONTROL ICONTROL 2624 +gplugd MACH_GPLUGD GPLUGD 2625 qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 mx23evk MACH_MX23EVK MX23EVK 2629 ap4evb MACH_AP4EVB AP4EVB 2630 @@ -476,8 +486,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 ti8168evm MACH_TI8168EVM TI8168EVM 2800 teton_bga MACH_TETON_BGA TETON_BGA 2816 -eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 -eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 +eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820 +eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 @@ -1113,3 +1123,5 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +smdk4212 MACH_SMDK4212 SMDK4212 3638 +smdk4412 MACH_SMDK4412 SMDK4412 3765 diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 6de73aab0195..a81404c09d5d 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -7,7 +7,7 @@ # ccflags-y := -DDEBUG # asflags-y := -DDEBUG -KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) +KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft) LDFLAGS +=--no-warn-mismatch obj-y += vfp.o diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 79bcb4316930..0cbd5a0a9332 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/cpu.h> +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/notifier.h> #include <linux/signal.h> @@ -68,7 +69,7 @@ static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread) /* * Force a reload of the VFP context from the thread structure. We do * this by ensuring that access to the VFP hardware is disabled, and - * clear last_VFP_context. Must be called from non-preemptible context. + * clear vfp_current_hw_state. Must be called from non-preemptible context. */ static void vfp_force_reload(unsigned int cpu, struct thread_info *thread) { @@ -436,9 +437,7 @@ static void vfp_enable(void *unused) set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); } -#ifdef CONFIG_PM -#include <linux/syscore_ops.h> - +#ifdef CONFIG_CPU_PM static int vfp_pm_suspend(void) { struct thread_info *ti = current_thread_info(); @@ -468,19 +467,33 @@ static void vfp_pm_resume(void) fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); } -static struct syscore_ops vfp_pm_syscore_ops = { - .suspend = vfp_pm_suspend, - .resume = vfp_pm_resume, +static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, + void *v) +{ + switch (cmd) { + case CPU_PM_ENTER: + vfp_pm_suspend(); + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + vfp_pm_resume(); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block vfp_cpu_pm_notifier_block = { + .notifier_call = vfp_cpu_pm_notifier, }; static void vfp_pm_init(void) { - register_syscore_ops(&vfp_pm_syscore_ops); + cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block); } #else static inline void vfp_pm_init(void) { } -#endif /* CONFIG_PM */ +#endif /* CONFIG_CPU_PM */ /* * Ensure that the VFP state stored in 'thread->vfpstate' is up to date diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index c7fd394d28a4..6eba53530d1c 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -158,7 +158,7 @@ sys_call_table: .long sys_sched_rr_get_interval .long sys_nanosleep .long sys_poll - .long sys_nfsservctl /* 145 */ + .long sys_ni_syscall /* 145 was nfsservctl */ .long sys_setresgid .long sys_getresgid .long sys_prctl diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index c7476295de80..abe5a9e85148 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -248,10 +248,6 @@ config HOTPLUG_CPU depends on SMP && HOTPLUG default y -config HAVE_LEGACY_PER_CPU_AREA - def_bool y - depends on SMP - config BF_REV_MIN int default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 56151b5dbc44..0e6d841b5d01 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -4,7 +4,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set @@ -40,7 +39,6 @@ CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -55,7 +53,6 @@ CONFIG_IP_PNP=y CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m -CONFIG_CAN_DEV=m CONFIG_CAN_BFIN=m CONFIG_IRDA=m CONFIG_IRLAN=m @@ -67,7 +64,6 @@ CONFIG_BFIN_SIR3=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -105,12 +101,12 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_AD7877=m CONFIG_INPUT_MISC=y # CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_UART1=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -163,6 +159,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_BLACKFIN=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_BLOCK=m @@ -185,8 +182,6 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y CONFIG_CIFS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_936=m @@ -196,7 +191,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y @@ -206,5 +200,4 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_BFIN_PSEUDODBG_INSNS=y -CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 7a075eaf6041..5a0625aad6a0 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -21,6 +21,7 @@ generic-y += local64.h generic-y += local.h generic-y += mman.h generic-y += msgbuf.h +generic-y += mutex.h generic-y += param.h generic-y += percpu.h generic-y += pgalloc.h diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 135225696fd2..54c6e2887e9f 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -7,111 +7,27 @@ #ifndef __ARCH_BLACKFIN_ATOMIC__ #define __ARCH_BLACKFIN_ATOMIC__ -#ifndef CONFIG_SMP -# include <asm-generic/atomic.h> -#else +#ifdef CONFIG_SMP -#include <linux/types.h> -#include <asm/system.h> /* local_irq_XXX() */ - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -#define ATOMIC_INIT(i) { (i) } -#define atomic_set(v, i) (((v)->counter) = i) - -#define atomic_read(v) __raw_uncached_fetch_asm(&(v)->counter) +#include <linux/linkage.h> asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); - asmlinkage int __raw_atomic_update_asm(volatile int *ptr, int value); - asmlinkage int __raw_atomic_clear_asm(volatile int *ptr, int value); - asmlinkage int __raw_atomic_set_asm(volatile int *ptr, int value); - asmlinkage int __raw_atomic_xor_asm(volatile int *ptr, int value); - asmlinkage int __raw_atomic_test_asm(const volatile int *ptr, int value); -static inline void atomic_add(int i, atomic_t *v) -{ - __raw_atomic_update_asm(&v->counter, i); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - __raw_atomic_update_asm(&v->counter, -i); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - return __raw_atomic_update_asm(&v->counter, i); -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - return __raw_atomic_update_asm(&v->counter, -i); -} +#define atomic_read(v) __raw_uncached_fetch_asm(&(v)->counter) -static inline void atomic_inc(volatile atomic_t *v) -{ - __raw_atomic_update_asm(&v->counter, 1); -} - -static inline void atomic_dec(volatile atomic_t *v) -{ - __raw_atomic_update_asm(&v->counter, -1); -} - -static inline void atomic_clear_mask(int mask, atomic_t *v) -{ - __raw_atomic_clear_asm(&v->counter, mask); -} - -static inline void atomic_set_mask(int mask, atomic_t *v) -{ - __raw_atomic_set_asm(&v->counter, mask); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -#define __atomic_add_unless(v, a, u) \ -({ \ - int c, old; \ - c = atomic_read(v); \ - while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ - c = old; \ - c; \ -}) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_add_return(i, v) __raw_atomic_update_asm(&(v)->counter, i) +#define atomic_sub_return(i, v) __raw_atomic_update_asm(&(v)->counter, -(i)) +#define atomic_clear_mask(m, v) __raw_atomic_clear_asm(&(v)->counter, m) +#define atomic_set_mask(m, v) __raw_atomic_set_asm(&(v)->counter, m) #endif +#include <asm-generic/atomic.h> + #endif diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h deleted file mode 100644 index ff6101aa2c71..000000000000 --- a/arch/blackfin/include/asm/mutex.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/mutex-dec.h> diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 1c0d190adaef..5cc111502822 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -195,17 +195,17 @@ static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) { if (access_ok(VERIFY_READ, from, n)) - memcpy(to, from, n); + memcpy(to, (const void __force *)from, n); else return n; return 0; } static inline unsigned long __must_check -copy_to_user(void *to, const void __user *from, unsigned long n) +copy_to_user(void __user *to, const void *from, unsigned long n) { if (access_ok(VERIFY_WRITE, to, n)) - memcpy(to, from, n); + memcpy((void __force *)to, from, n); else return n; return 0; diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index b7bdc42fe1a3..1f88edd4572a 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -38,6 +38,6 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o # the kgdb test puts code into L2 and without linker # relaxation, we need to force long calls to/from it -CFLAGS_kgdb_test.o := -mlong-calls -O0 +CFLAGS_kgdb_test.o := -mlong-calls obj-$(CONFIG_DEBUG_MMRS) += debug-mmrs.o diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c index 2a6e9dbb62a5..4a7dcfea98af 100644 --- a/arch/blackfin/kernel/kgdb_test.c +++ b/arch/blackfin/kernel/kgdb_test.c @@ -50,8 +50,7 @@ void kgdb_l2_test(void) #endif - -int kgdb_test(char *name, int len, int count, int z) +noinline int kgdb_test(char *name, int len, int count, int z) { pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z); count = z; diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 9e9b60d969dc..1bcf3a3c57d8 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -188,8 +188,7 @@ irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id) static struct irqaction gptmr0_irq = { .name = "Blackfin GPTimer0", - .flags = IRQF_DISABLED | IRQF_TIMER | \ - IRQF_IRQPOLL | IRQF_PERCPU, + .flags = IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU, .handler = bfin_gptmr0_interrupt, }; @@ -297,8 +296,7 @@ irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id) static struct irqaction coretmr_irq = { .name = "Blackfin CoreTimer", - .flags = IRQF_DISABLED | IRQF_TIMER | \ - IRQF_IRQPOLL | IRQF_PERCPU, + .flags = IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU, .handler = bfin_coretmr_interrupt, }; diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index ceb2bf63dfe2..2310b249675f 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -25,7 +25,6 @@ static struct irqaction bfin_timer_irq = { .name = "Blackfin Timer Tick", - .flags = IRQF_DISABLED }; #if defined(CONFIG_IPIPE) diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index eb325ed6607e..5da5787fc4ef 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -54,7 +54,8 @@ static struct resource dm9000_resources[] = { [2] = { .start = IRQ_PF10, .end = IRQ_PF10, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH), + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_SHAREABLE), }, }; diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 44fd8409db10..9fb20d6d8f91 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -605,7 +605,7 @@ static struct platform_device bfin_mac_device = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, + .irq_type = IRQF_TRIGGER_HIGH, }; static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index 1b4ac5c64aae..5ba389fc61ae 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -570,7 +570,7 @@ static struct platform_device bfin_mac_device = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, + .irq_type = IRQF_TRIGGER_HIGH, }; static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index b52e6728f64f..6c916a67ef68 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -962,10 +962,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ + || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) { - .modalias = "ad183x", + .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, @@ -984,9 +984,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE) +#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE) { - .modalias = "adav80x", + .modalias = "adav801", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, @@ -2101,7 +2101,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE) +#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE) { I2C_BOARD_INFO("adav803", 0x10), }, @@ -2134,23 +2134,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE) - { - I2C_BOARD_INFO("ad7414", 0x9), - .irq = IRQ_PG5, - .irq_flags = IRQF_TRIGGER_LOW, - }, -#endif - -#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE) - { - I2C_BOARD_INFO("ad7417", 0xb), - .irq = IRQ_PG5, - .irq_flags = IRQF_TRIGGER_LOW, - .platform_data = (void *)GPIO_PF4, - }, -#endif - #if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE) { I2C_BOARD_INFO("ade7854", 0x38), @@ -2161,15 +2144,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("adt75", 0x9), .irq = IRQ_PG5, - .irq_flags = IRQF_TRIGGER_LOW, - }, -#endif - -#if defined(CONFIG_ADT7408) || defined(CONFIG_ADT7408_MODULE) - { - I2C_BOARD_INFO("adt7408", 0x18), - .irq = IRQ_PG5, - .irq_flags = IRQF_TRIGGER_LOW, }, #endif @@ -2178,7 +2152,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("adt7410", 0x48), /* CT critical temperature event. line 0 */ .irq = IRQ_PG5, - .irq_flags = IRQF_TRIGGER_LOW, .platform_data = (void *)&adt7410_platform_data, }, #endif @@ -2187,7 +2160,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("ad7291", 0x20), .irq = IRQ_PG5, - .irq_flags = IRQF_TRIGGER_LOW, }, #endif @@ -2275,6 +2247,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("adau1361", 0x38), }, #endif +#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE) + { + I2C_BOARD_INFO("adau1701", 0x34), + }, +#endif #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) { I2C_BOARD_INFO("ad5258", 0x18), @@ -2388,7 +2365,7 @@ static struct platform_device bfin_sport1_uart_device = { #define PATA_INT IRQ_PF5 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 1, - .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED, + .irq_flags = IRQF_TRIGGER_HIGH, }; static struct resource bfin_pata_resources[] = { @@ -2540,13 +2517,21 @@ static struct platform_device bfin_ac97_pcm = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +static struct platform_device bfin_eval_adav801_device = { + .name = "bfin-eval-adav801", + .id = -1, +}; +#endif + #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", @@ -2661,6 +2646,20 @@ static struct platform_device iio_gpio_trigger = { }; #endif +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +static struct platform_device bf5xx_adau1373_device = { + .name = "bfin-eval-adau1373", +}; +#endif + +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +static struct platform_device bf5xx_adau1701_device = { + .name = "bfin-eval-adau1701", +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, @@ -2782,7 +2781,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) &bfin_ad73311_codec_device, #endif @@ -2821,6 +2820,21 @@ static struct platform_device *stamp_devices[] __initdata = { defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) &iio_gpio_trigger, #endif + +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) + &bf5xx_adau1373_device, +#endif + +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) + &bf5xx_adau1701_device, +#endif + +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) + &bfin_eval_adav801_device, +#endif }; static int __init net2272_init(void) diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 9b7287abdfa1..2da0316d890e 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -572,7 +572,7 @@ static struct platform_device bfin_mac_device = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, + .irq_type = IRQF_TRIGGER_HIGH, }; static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index e4f397d1d65b..c1b72f2d6354 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -348,7 +348,7 @@ static struct platform_device bfin_sir0_device = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, + .irq_type = IRQF_TRIGGER_HIGH, }; static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 85abd8be1343..db22401e7605 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -114,7 +114,7 @@ void __init platform_request_ipi(int irq, void *handler) int ret; const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1; - ret = request_irq(irq, handler, IRQF_DISABLED | IRQF_PERCPU, name, handler); + ret = request_irq(irq, handler, IRQF_PERCPU, name, handler); if (ret) panic("Cannot request %s for IPI service", name); } diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 225d311c9701..e4137297b790 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1543,7 +1543,7 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall /* for vm86 */ .long _sys_ni_syscall /* old "query_module" */ .long _sys_ni_syscall /* sys_poll */ - .long _sys_nfsservctl + .long _sys_ni_syscall /* old nfsservctl */ .long _sys_setresgid /* setresgid16 */ /* 170 */ .long _sys_getresgid /* getresgid16 */ .long _sys_prctl diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 107622aacf6b..0784a52389c8 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -295,10 +295,15 @@ EXPORT_SYMBOL_GPL(smp_call_function_single); void smp_send_reschedule(int cpu) { + cpumask_t callmap; /* simply trigger an ipi */ if (cpu_is_offline(cpu)) return; - platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0); + + cpumask_clear(&callmap); + cpumask_set_cpu(cpu, &callmap); + + smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0); return; } diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 17addacb169e..408b055c585f 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -282,8 +282,8 @@ config ETRAX_RTC Enables drivers for the Real-Time Clock battery-backed chips on some products. The kernel reads the time when booting, and the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a - rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc - device. You can check the time with cat /proc/rtc, but + rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the + /dev/rtc device. You can check the time with cat /proc/rtc, but normal time reading should be done using libc function time and friends. diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index adc164e99339..df9a38b4f18f 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -24,8 +24,8 @@ config ETRAX_PA_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on port PA. Some products put the leds on PB or a memory-mapped latch (CSP0) instead. @@ -34,8 +34,8 @@ config ETRAX_PB_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on port PB. Some products put the leds on PA or a memory-mapped latch (CSP0) instead. @@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on a memory-mapped latch using chip select CSP0, this is mapped at 0x90000000. Some products put the leds on PA or PB instead. diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 0d7221779923..32d90867a984 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -4,6 +4,7 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 select NET_ETHERNET + select NET_CORE select MII help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 1161883eb582..592fbe9dfb62 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -771,7 +771,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 41a2732e8b9c..e47e9c3401b0 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -4,6 +4,7 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V32 select NET_ETHERNET + select NET_CORE select MII help This option enables the ETRAX FS built-in 10/100Mbit Ethernet diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 84fed7e91ada..c3ea4694fbaf 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -714,7 +714,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S deleted file mode 100644 index d671fed451c9..000000000000 --- a/arch/cris/arch-v32/lib/nand_init.S +++ /dev/null @@ -1,178 +0,0 @@ -##============================================================================= -## -## nand_init.S -## -## The bootrom copies data from the NAND flash to the internal RAM but -## due to a bug/feature we can only trust the 256 first bytes. So this -## code copies more data from NAND flash to internal RAM. Obvioulsy this -## code must fit in the first 256 bytes so alter with care. -## -## Some notes about the bug/feature for future reference: -## The bootrom copies the first 127 KB from NAND flash to internal -## memory. The problem is that it does a bytewise copy. NAND flashes -## does autoincrement on the address so for a 16-bite device each -## read/write increases the address by two. So the copy loop in the -## bootrom will discard every second byte. This is solved by inserting -## zeroes in every second byte in the first erase block. -## -## The bootrom also incorrectly assumes that it can read the flash -## linear with only one read command but the flash will actually -## switch between normal area and spare area if you do that so we -## can't trust more than the first 256 bytes. -## -##============================================================================= - -#include <arch/hwregs/asm/reg_map_asm.h> -#include <arch/hwregs/asm/gio_defs_asm.h> -#include <arch/hwregs/asm/pinmux_defs_asm.h> -#include <arch/hwregs/asm/bif_core_defs_asm.h> -#include <arch/hwregs/asm/config_defs_asm.h> - -;; There are 8-bit NAND flashes and 16-bit NAND flashes. -;; We need to treat them slightly different. -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 -#define PAGE_SIZE 256 -#else -#error 2 -#define PAGE_SIZE 512 -#endif -#define ERASE_BLOCK 16384 - -;; GPIO pins connected to NAND flash -#define CE 4 -#define CLE 5 -#define ALE 6 -#define BY 7 - -;; Address space for NAND flash -#define NAND_RD_ADDR 0x90000000 -#define NAND_WR_ADDR 0x94000000 - -#define READ_CMD 0x00 - -;; Readability macros -#define CSP_MASK \ - REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \ - REG_MASK(bif_core, rw_grp3_cfg, gated_csp1) -#define CSP_VAL \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr) - -;;---------------------------------------------------------------------------- -;; Macros to set/clear GPIO bits - -.macro SET x - or.b (1<<\x),$r9 - move.d $r9, [$r2] -.endm - -.macro CLR x - and.b ~(1<<\x),$r9 - move.d $r9, [$r2] -.endm - -;;---------------------------------------------------------------------------- - -nand_boot: - ;; Check if nand boot was selected - move.d REG_ADDR(config, regi_config, r_bootsel), $r0 - move.d [$r0], $r0 - and.d REG_MASK(config, r_bootsel, boot_mode), $r0 - cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 - bne normal_boot ; No NAND boot - nop - -copy_nand_to_ram: - ;; copy_nand_to_ram - ;; Arguments - ;; r10 - destination - ;; r11 - source offset - ;; r12 - size - ;; r13 - Address to jump to after completion - ;; Note : r10-r12 are clobbered on return - ;; Registers used: - ;; r0 - NAND_RD_ADDR - ;; r1 - NAND_WR_ADDR - ;; r2 - reg_gio_rw_pa_dout - ;; r3 - reg_gio_r_pa_din - ;; r4 - tmp - ;; r5 - byte counter within a page - ;; r6 - reg_pinmux_rw_pa - ;; r7 - reg_gio_rw_pa_oe - ;; r8 - reg_bif_core_rw_grp3_cfg - ;; r9 - reg_gio_rw_pa_dout shadow - move.d 0x90000000, $r0 - move.d 0x94000000, $r1 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2 - move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3 - move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6 - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7 - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8 - -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - lsrq 1, $r11 -#endif - ;; Set up GPIO - move.d [$r2], $r9 - move.d [$r7], $r4 - or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4 - move.d $r4, [$r7] - - ;; Set up bif - move.d [$r8], $r4 - and.d CSP_MASK, $r4 - or.d CSP_VAL, $r4 - move.d $r4, [$r8] - -1: ;; Copy one page - CLR CE - SET CLE - moveq READ_CMD, $r4 - move.b $r4, [$r1] - moveq 20, $r4 -2: bne 2b - subq 1, $r4 - CLR CLE - SET ALE - clear.w [$r1] ; Column address = 0 - move.d $r11, $r4 - lsrq 8, $r4 - move.b $r4, [$r1] ; Row address - lsrq 8, $r4 - move.b $r4, [$r1] ; Row address - moveq 20, $r4 -2: bne 2b - subq 1, $r4 - CLR ALE -2: move.d [$r3], $r4 - and.d 1 << BY, $r4 - beq 2b - movu.w PAGE_SIZE, $r5 -2: ; Copy one byte/word -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - move.w [$r0], $r4 -#else - move.b [$r0], $r4 -#endif - subq 1, $r5 - bne 2b -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - move.w $r4, [$r10+] - subu.w PAGE_SIZE*2, $r12 -#else - move.b $r4, [$r10+] - subu.w PAGE_SIZE, $r12 -#endif - bpl 1b - addu.w PAGE_SIZE, $r11 - - ;; End of copy - jump $r13 - nop - - ;; This will warn if the code above is too large. If you consider - ;; to remove this you don't understand the bug/feature. - .org 256 - .org ERASE_BLOCK - -normal_boot: diff --git a/arch/cris/include/asm/serial.h b/arch/cris/include/asm/serial.h new file mode 100644 index 000000000000..af7535a955fb --- /dev/null +++ b/arch/cris/include/asm/serial.h @@ -0,0 +1,9 @@ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 017d6d7b784f..5ba23f715ea5 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1358,7 +1358,7 @@ sys_call_table: .long sys_ni_syscall /* for vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 091ed6192ae8..d1f377f5d3b6 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -160,7 +160,7 @@ config VT_CONSOLE config HW_CONSOLE bool - depends on VT && !S390 && !UM + depends on VT default y comment "Unix98 PTY support" @@ -195,7 +195,7 @@ config UNIX98_PTYS source "drivers/char/pcmcia/Kconfig" -source "drivers/serial/Kconfig" +source "drivers/tty/serial/Kconfig" source "drivers/i2c/Kconfig" diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S index f4b2e67bcc34..4be2ea2fbe26 100644 --- a/arch/h8300/kernel/syscalls.S +++ b/arch/h8300/kernel/syscalls.S @@ -183,7 +183,7 @@ SYMBOL_NAME_LABEL(sys_call_table) .long SYMBOL_NAME(sys_ni_syscall) /* for vm86 */ .long SYMBOL_NAME(sys_ni_syscall) /* sys_query_module */ .long SYMBOL_NAME(sys_poll) - .long SYMBOL_NAME(sys_nfsservctl) + .long SYMBOL_NAME(sys_ni_syscall) /* old nfsservctl */ .long SYMBOL_NAME(sys_setresgid16) /* 170 */ .long SYMBOL_NAME(sys_getresgid16) .long SYMBOL_NAME(sys_prctl) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 0e5cd1405e0e..43ab1cd097a5 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,4 +234,4 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y CONFIG_MISC_DEVICES=y -CONFIG_DMAR=y +CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/dig/Makefile b/arch/ia64/dig/Makefile index 2f7caddf093e..ae16ec4f6308 100644 --- a/arch/ia64/dig/Makefile +++ b/arch/ia64/dig/Makefile @@ -6,7 +6,7 @@ # obj-y := setup.o -ifeq ($(CONFIG_DMAR), y) +ifeq ($(CONFIG_INTEL_IOMMU), y) obj-$(CONFIG_IA64_GENERIC) += machvec.o machvec_vtd.o else obj-$(CONFIG_IA64_GENERIC) += machvec.o diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 80241fe03f50..f5f4ef149aac 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -915,7 +915,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static dma_addr_t sba_map_page(struct device *dev, struct page *page, unsigned long poff, size_t size, @@ -1044,7 +1044,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) @@ -1127,7 +1127,7 @@ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void * sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) @@ -1190,7 +1190,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) @@ -1453,7 +1453,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction dir, @@ -1549,7 +1549,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction dir, diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c index 7e81966ce481..47afcc61f6e5 100644 --- a/arch/ia64/hp/sim/simeth.c +++ b/arch/ia64/hp/sim/simeth.c @@ -172,7 +172,7 @@ static const struct net_device_ops simeth_netdev_ops = { .ndo_stop = simeth_close, .ndo_start_xmit = simeth_tx, .ndo_get_stats = simeth_get_stats, - .ndo_set_multicast_list = set_multicast_list, /* not yet used */ + .ndo_set_rx_mode = set_multicast_list, /* not yet used */ }; diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h index d66d446b127c..d05e78f6db94 100644 --- a/arch/ia64/include/asm/device.h +++ b/arch/ia64/include/asm/device.h @@ -10,7 +10,7 @@ struct dev_archdata { #ifdef CONFIG_ACPI void *acpi_handle; #endif -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU void *iommu; /* hook for IOMMU specific extension */ #endif }; diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h index 745e095fe82e..105c93b00b1b 100644 --- a/arch/ia64/include/asm/iommu.h +++ b/arch/ia64/include/asm/iommu.h @@ -7,12 +7,14 @@ extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); +#ifdef CONFIG_INTEL_IOMMU extern int force_iommu, no_iommu; -extern int iommu_detected; -#ifdef CONFIG_DMAR extern int iommu_pass_through; +extern int iommu_detected; #else #define iommu_pass_through (0) +#define no_iommu (1) +#define iommu_detected (0) #endif extern void iommu_dma_init(void); extern void machvec_init(const char *name); diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 73b5f785e70c..127dd7be346a 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -139,7 +139,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14); } -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU extern void pci_iommu_alloc(void); #endif #endif /* _ASM_IA64_PCI_H */ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 395c2f216dd8..d959c84904be 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_IA64_ESI) += esi.o ifneq ($(CONFIG_IA64_ESI),) obj-y += esi_stub.o # must be in kernel proper endif -obj-$(CONFIG_DMAR) += pci-dma.o +obj-$(CONFIG_INTEL_IOMMU) += pci-dma.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o obj-$(CONFIG_BINFMT_ELF) += elfcore.o diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 3be485a300b1..bfb4d01e0e51 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -88,7 +88,7 @@ acpi_get_sysname(void) struct acpi_table_rsdp *rsdp; struct acpi_table_xsdt *xsdt; struct acpi_table_header *hdr; -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU u64 i, nentries; #endif @@ -125,7 +125,7 @@ acpi_get_sysname(void) return "xen"; } -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU /* Look for Intel IOMMU */ nentries = (hdr->length - sizeof(*hdr)) / sizeof(xsdt->table_offset_entry[0]); diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 97dd2abdeb1a..198c753d1006 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1614,7 +1614,7 @@ sys_call_table: data8 sys_sched_get_priority_min data8 sys_sched_rr_get_interval data8 sys_nanosleep - data8 sys_nfsservctl + data8 sys_ni_syscall // old nfsservctl data8 sys_prctl // 1170 data8 sys_getpagesize data8 sys_mmap2 diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 009df5434a7a..94e0db72d4a6 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -131,7 +131,7 @@ void arch_teardown_msi_irq(unsigned int irq) return ia64_teardown_msi_irq(irq); } -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU #ifdef CONFIG_SMP static int dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) @@ -210,5 +210,5 @@ int arch_setup_dmar_msi(unsigned int irq) "edge"); return 0; } -#endif /* CONFIG_DMAR */ +#endif /* CONFIG_INTEL_IOMMU */ diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index f6b1ff0aea76..c16162c70860 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -14,7 +14,7 @@ #include <asm/system.h> -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU #include <linux/kernel.h> diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index b92b9445255d..6c4e9aaa70c1 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -10,6 +10,7 @@ config M32R select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 config SBUS bool diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S index 528f2e6ad064..f365c19795ef 100644 --- a/arch/m32r/kernel/syscall_table.S +++ b/arch/m32r/kernel/syscall_table.S @@ -168,7 +168,7 @@ ENTRY(sys_call_table) .long sys_tas /* vm86 syscall holder */ .long sys_ni_syscall /* query_module syscall holder */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid /* 170 */ .long sys_getresgid .long sys_prctl diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9e8ee9d2b8ca..6c28582fb98f 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -21,6 +21,15 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool +config GENERIC_CLOCKEVENTS + bool + +config GENERIC_CMOS_UPDATE + def_bool !MMU + +config GENERIC_GPIO + bool + config GENERIC_HWEIGHT bool default y @@ -29,10 +38,16 @@ config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_IOMAP + def_bool MMU + config TIME_LOW_RES bool default y +config ARCH_USES_GETTIMEOFFSET + def_bool MMU + config NO_IOPORT def_bool y @@ -62,13 +77,31 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. -menu "Platform dependent setup" +config MMU_MOTOROLA + bool + +config MMU_SUN3 + bool + depends on MMU && !MMU_MOTOROLA + +menu "Platform setup" + +source arch/m68k/Kconfig.cpu + +source arch/m68k/Kconfig.machine + +source arch/m68k/Kconfig.bus + +endmenu + +menu "Kernel Features" -if MMU -source arch/m68k/Kconfig.mmu +if COLDFIRE +source "kernel/Kconfig.preempt" endif -if !MMU -source arch/m68k/Kconfig.nommu + +if !MMU || COLDFIRE +source "kernel/time/Kconfig" endif source "mm/Kconfig" @@ -85,9 +118,9 @@ if !MMU menu "Power management options" config PM - bool "Power Management support" - help - Support processor power management modes + bool "Power Management support" + help + Support processor power management modes endmenu endif @@ -96,151 +129,7 @@ source "net/Kconfig" source "drivers/Kconfig" -if MMU - -menu "Character devices" - -config ATARI_MFPSER - tristate "Atari MFP serial support" - depends on ATARI - ---help--- - If you like to use the MFP serial ports ("Modem1", "Serial1") under - Linux, say Y. The driver equally supports all kinds of MFP serial - ports and automatically detects whether Serial1 is available. - - To compile this driver as a module, choose M here. - - Note for Falcon users: You also have an MFP port, it's just not - wired to the outside... But you could use the port under Linux. - -config ATARI_MIDI - tristate "Atari MIDI serial support" - depends on ATARI - help - If you want to use your Atari's MIDI port in Linux, say Y. - - To compile this driver as a module, choose M here. - -config ATARI_DSP56K - tristate "Atari DSP56k support (EXPERIMENTAL)" - depends on ATARI && EXPERIMENTAL - help - If you want to be able to use the DSP56001 in Falcons, say Y. This - driver is still experimental, and if you don't know what it is, or - if you don't have this processor, just say N. - - To compile this driver as a module, choose M here. - -config AMIGA_BUILTIN_SERIAL - tristate "Amiga builtin serial support" - depends on AMIGA - help - If you want to use your Amiga's built-in serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on AMIGA - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config GVPIOEXT - tristate "GVP IO-Extender support" - depends on PARPORT=n && ZORRO - help - If you want to use a GVP IO-Extender serial card in Linux, say Y. - Otherwise, say N. - -config GVPIOEXT_LP - tristate "GVP IO-Extender parallel printer support" - depends on GVPIOEXT - help - Say Y to enable driving a printer from the parallel port on your - GVP IO-Extender card, N otherwise. - -config GVPIOEXT_PLIP - tristate "GVP IO-Extender PLIP support" - depends on GVPIOEXT - help - Say Y to enable doing IP over the parallel port on your GVP - IO-Extender card, N otherwise. - -config MAC_HID - bool - depends on INPUT_ADBHID - default y - -config HPDCA - tristate "HP DCA serial support" - depends on DIO && SERIAL_8250 - help - If you want to use the internal "DCA" serial ports on an HP300 - machine, say Y here. - -config HPAPCI - tristate "HP APCI serial support" - depends on HP300 && SERIAL_8250 && EXPERIMENTAL - help - If you want to use the internal "APCI" serial ports on an HP400 - machine, say Y here. - -config MVME147_SCC - bool "SCC support for MVME147 serial ports" - depends on MVME147 && BROKEN - help - This is the driver for the serial ports on the Motorola MVME147 - boards. Everyone using one of these boards should say Y here. - -config MVME162_SCC - bool "SCC support for MVME162 serial ports" - depends on MVME16x && BROKEN - help - This is the driver for the serial ports on the Motorola MVME162 and - 172 boards. Everyone using one of these boards should say Y here. - -config BVME6000_SCC - bool "SCC support for BVME6000 serial ports" - depends on BVME6000 && BROKEN - help - This is the driver for the serial ports on the BVME4000 and BVME6000 - boards from BVM Ltd. Everyone using one of these boards should say - Y here. - -config DN_SERIAL - bool "Support for DN serial port (dummy)" - depends on APOLLO - -config SERIAL_CONSOLE - bool "Support for serial port console" - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - If unsure, say N. - -endmenu - -endif +source "arch/m68k/Kconfig.devices" source "fs/Kconfig" diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus new file mode 100644 index 000000000000..8294f0c1785e --- /dev/null +++ b/arch/m68k/Kconfig.bus @@ -0,0 +1,55 @@ +if MMU + +comment "Bus Support" + +config NUBUS + bool + depends on MAC + default y + +config ZORRO + bool "Amiga Zorro (AutoConfig) bus support" + depends on AMIGA + help + This enables support for the Zorro bus in the Amiga. If you have + expansion cards in your Amiga that conform to the Amiga + AutoConfig(tm) specification, say Y, otherwise N. Note that even + expansion cards that do not fit in the Zorro slots but fit in e.g. + the CPU slot may fall in this category, so you have to say Y to let + Linux use these. + +config AMIGA_PCMCIA + bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)" + depends on AMIGA && EXPERIMENTAL + help + Include support in the kernel for pcmcia on Amiga 1200 and Amiga + 600. If you intend to use pcmcia cards say Y; otherwise say N. + +config ISA + bool + depends on Q40 || AMIGA_PCMCIA + default y + help + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +config GENERIC_ISA_DMA + def_bool ISA + +source "drivers/pci/Kconfig" + +source "drivers/zorro/Kconfig" + +endif + +if !MMU + +config ISA_DMA_API + def_bool !M5272 + +source "drivers/pcmcia/Kconfig" + +endif diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu new file mode 100644 index 000000000000..e632b2d12106 --- /dev/null +++ b/arch/m68k/Kconfig.cpu @@ -0,0 +1,429 @@ +comment "Processor Type" + +config M68000 + bool + select CPU_HAS_NO_BITFIELDS + help + The Freescale (was Motorola) 68000 CPU is the first generation of + the well known M68K family of processors. The CPU core as well as + being available as a stand alone CPU was also used in many + System-On-Chip devices (eg 68328, 68302, etc). It does not contain + a paging MMU. + +config MCPU32 + bool + select CPU_HAS_NO_BITFIELDS + help + The Freescale (was then Motorola) CPU32 is a CPU core that is + based on the 68020 processor. For the most part it is used in + System-On-Chip parts, and does not contain a paging MMU. + +config COLDFIRE + bool + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select CPU_HAS_NO_BITFIELDS + help + The Freescale ColdFire family of processors is a modern derivitive + of the 68000 processor family. They are mainly targeted at embedded + applications, and are all System-On-Chip (SOC) devices, as opposed + to stand alone CPUs. They implement a subset of the original 68000 + processor instruction set. + +config M68020 + bool "68020 support" + depends on MMU + help + If you anticipate running this kernel on a computer with a MC68020 + processor, say Y. Otherwise, say N. Note that the 68020 requires a + 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the + Sun 3, which provides its own version. + +config M68030 + bool "68030 support" + depends on MMU && !MMU_SUN3 + help + If you anticipate running this kernel on a computer with a MC68030 + processor, say Y. Otherwise, say N. Note that a MC68EC030 will not + work, as it does not include an MMU (Memory Management Unit). + +config M68040 + bool "68040 support" + depends on MMU && !MMU_SUN3 + help + If you anticipate running this kernel on a computer with a MC68LC040 + or MC68040 processor, say Y. Otherwise, say N. Note that an + MC68EC040 will not work, as it does not include an MMU (Memory + Management Unit). + +config M68060 + bool "68060 support" + depends on MMU && !MMU_SUN3 + help + If you anticipate running this kernel on a computer with a MC68060 + processor, say Y. Otherwise, say N. + +config M68328 + bool "MC68328" + depends on !MMU + select M68000 + help + Motorola 68328 processor support. + +config M68EZ328 + bool "MC68EZ328" + depends on !MMU + select M68000 + help + Motorola 68EX328 processor support. + +config M68VZ328 + bool "MC68VZ328" + depends on !MMU + select M68000 + help + Motorola 68VZ328 processor support. + +config M68360 + bool "MC68360" + depends on !MMU + select MCPU32 + help + Motorola 68360 processor support. + +config M5206 + bool "MCF5206" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5206 processor support. + +config M5206e + bool "MCF5206e" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5206e processor support. + +config M520x + bool "MCF520x" + depends on !MMU + select COLDFIRE + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + help + Freescale Coldfire 5207/5208 processor support. + +config M523x + bool "MCF523x" + depends on !MMU + select COLDFIRE + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + help + Freescale Coldfire 5230/1/2/4/5 processor support + +config M5249 + bool "MCF5249" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5249 processor support. + +config M527x + bool + +config M5271 + bool "MCF5271" + depends on !MMU + select COLDFIRE + select M527x + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + select GENERIC_CLOCKEVENTS + help + Freescale (Motorola) ColdFire 5270/5271 processor support. + +config M5272 + bool "MCF5272" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5272 processor support. + +config M5275 + bool "MCF5275" + depends on !MMU + select COLDFIRE + select M527x + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + select GENERIC_CLOCKEVENTS + help + Freescale (Motorola) ColdFire 5274/5275 processor support. + +config M528x + bool "MCF528x" + depends on !MMU + select COLDFIRE + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + help + Motorola ColdFire 5280/5282 processor support. + +config M5307 + bool "MCF5307" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_CACHE_CB + select HAVE_MBAR + help + Motorola ColdFire 5307 processor support. + +config M532x + bool "MCF532x" + depends on !MMU + select COLDFIRE + select HAVE_CACHE_CB + help + Freescale (Motorola) ColdFire 532x processor support. + +config M5407 + bool "MCF5407" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_CACHE_CB + select HAVE_MBAR + help + Motorola ColdFire 5407 processor support. + +config M54xx + bool + +config M547x + bool "MCF547x" + depends on !MMU + select COLDFIRE + select M54xx + select HAVE_CACHE_CB + select HAVE_MBAR + help + Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. + +config M548x + bool "MCF548x" + depends on !MMU + select COLDFIRE + select M54xx + select HAVE_CACHE_CB + select HAVE_MBAR + help + Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. + + +comment "Processor Specific Options" + +config M68KFPU_EMU + bool "Math emulation support (EXPERIMENTAL)" + depends on MMU + depends on EXPERIMENTAL + help + At some point in the future, this will cause floating-point math + instructions to be emulated by the kernel on machines that lack a + floating-point math coprocessor. Thrill-seekers and chronically + sleep-deprived psychotic hacker types can say Y now, everyone else + should probably wait a while. + +config M68KFPU_EMU_EXTRAPREC + bool "Math emulation extra precision" + depends on M68KFPU_EMU + help + The fpu uses normally a few bit more during calculations for + correct rounding, the emulator can (often) do the same but this + extra calculation can cost quite some time, so you can disable + it here. The emulator will then "only" calculate with a 64 bit + mantissa and round slightly incorrect, what is more than enough + for normal usage. + +config M68KFPU_EMU_ONLY + bool "Math emulation only kernel" + depends on M68KFPU_EMU + help + This option prevents any floating-point instructions from being + compiled into the kernel, thereby the kernel doesn't save any + floating point context anymore during task switches, so this + kernel will only be usable on machines without a floating-point + math coprocessor. This makes the kernel a bit faster as no tests + needs to be executed whether a floating-point instruction in the + kernel should be executed or not. + +config ADVANCED + bool "Advanced configuration options" + depends on MMU + ---help--- + This gives you access to some advanced options for the CPU. The + defaults should be fine for most users, but these options may make + it possible for you to improve performance somewhat if you know what + you are doing. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about these options. + + Most users should say N to this question. + +config RMW_INSNS + bool "Use read-modify-write instructions" + depends on ADVANCED + ---help--- + This allows to use certain instructions that work with indivisible + read-modify-write bus cycles. While this is faster than the + workaround of disabling interrupts, it can conflict with DMA + ( = direct memory access) on many Amiga systems, and it is also said + to destabilize other machines. It is very likely that this will + cause serious problems on any Amiga or Atari Medusa if set. The only + configuration where it should work are 68030-based Ataris, where it + apparently improves performance. But you've been warned! Unless you + really know what you are doing, say N. Try Y only if you're quite + adventurous. + +config SINGLE_MEMORY_CHUNK + bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 + depends on MMU + default y if SUN3 + select NEED_MULTIPLE_NODES + help + Ignore all but the first contiguous chunk of physical memory for VM + purposes. This will save a few bytes kernel size and may speed up + some operations. Say N if not sure. + +config ARCH_DISCONTIGMEM_ENABLE + def_bool MMU && !SINGLE_MEMORY_CHUNK + +config 060_WRITETHROUGH + bool "Use write-through caching for 68060 supervisor accesses" + depends on ADVANCED && M68060 + ---help--- + The 68060 generally uses copyback caching of recently accessed data. + Copyback caching means that memory writes will be held in an on-chip + cache and only written back to memory some time later. Saying Y + here will force supervisor (kernel) accesses to use writethrough + caching. Writethrough caching means that data is written to memory + straight away, so that cache and memory data always agree. + Writethrough caching is less efficient, but is needed for some + drivers on 68060 based systems where the 68060 bus snooping signal + is hardwired on. The 53c710 SCSI driver is known to suffer from + this problem. + +config M68K_L2_CACHE + bool + depends on MAC + default y + +config NODES_SHIFT + int + default "3" + depends on !SINGLE_MEMORY_CHUNK + +config FPU + bool + +config COLDFIRE_SW_A7 + bool + +config HAVE_CACHE_SPLIT + bool + +config HAVE_CACHE_CB + bool + +config HAVE_MBAR + bool + +config HAVE_IPSBAR + bool + +config CLOCK_SET + bool "Enable setting the CPU clock frequency" + depends on COLDFIRE + default n + help + On some CPU's you do not need to know what the core CPU clock + frequency is. On these you can disable clock setting. On some + traditional 68K parts, and on all ColdFire parts you need to set + the appropriate CPU clock frequency. On these devices many of the + onboard peripherals derive their timing from the master CPU clock + frequency. + +config CLOCK_FREQ + int "Set the core clock frequency" + default "66666666" + depends on CLOCK_SET + help + Define the CPU clock frequency in use. This is the core clock + frequency, it may or may not be the same as the external clock + crystal fitted to your board. Some processors have an internal + PLL and can have their frequency programmed at run time, others + use internal dividers. In general the kernel won't setup a PLL + if it is fitted (there are some exceptions). This value will be + specific to the exact CPU that you are using. + +config OLDMASK + bool "Old mask 5307 (1H55J) silicon" + depends on M5307 + help + Build support for the older revision ColdFire 5307 silicon. + Specifically this is the 1H55J mask revision. + +if HAVE_CACHE_SPLIT +choice + prompt "Split Cache Configuration" + default CACHE_I + +config CACHE_I + bool "Instruction" + help + Use all of the ColdFire CPU cache memory as an instruction cache. + +config CACHE_D + bool "Data" + help + Use all of the ColdFire CPU cache memory as a data cache. + +config CACHE_BOTH + bool "Both" + help + Split the ColdFire CPU cache, and use half as an instruction cache + and half as a data cache. +endchoice +endif + +if HAVE_CACHE_CB +choice + prompt "Data cache mode" + default CACHE_WRITETHRU + +config CACHE_WRITETHRU + bool "Write-through" + help + The ColdFire CPU cache is set into Write-through mode. + +config CACHE_COPYBACK + bool "Copy-back" + help + The ColdFire CPU cache is set into Copy-back mode. +endchoice +endif + diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices new file mode 100644 index 000000000000..d214034be6a6 --- /dev/null +++ b/arch/m68k/Kconfig.devices @@ -0,0 +1,123 @@ +if MMU + +config ARCH_MAY_HAVE_PC_FDC + bool + depends on BROKEN && (Q40 || SUN3X) + default y + +menu "Platform devices" + +config HEARTBEAT + bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 + default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +# We have a dedicated heartbeat LED. :-) +config PROC_HARDWARE + bool "/proc/hardware support" + help + Say Y here to support the /proc/hardware file, which gives you + access to information about the machine you're running on, + including the model, CPU, MMU, clock speed, BogoMIPS rating, + and memory size. + +endmenu + +menu "Character devices" + +config ATARI_MFPSER + tristate "Atari MFP serial support" + depends on ATARI + ---help--- + If you like to use the MFP serial ports ("Modem1", "Serial1") under + Linux, say Y. The driver equally supports all kinds of MFP serial + ports and automatically detects whether Serial1 is available. + + To compile this driver as a module, choose M here. + + Note for Falcon users: You also have an MFP port, it's just not + wired to the outside... But you could use the port under Linux. + +config ATARI_MIDI + tristate "Atari MIDI serial support" + depends on ATARI + help + If you want to use your Atari's MIDI port in Linux, say Y. + + To compile this driver as a module, choose M here. + +config ATARI_DSP56K + tristate "Atari DSP56k support (EXPERIMENTAL)" + depends on ATARI && EXPERIMENTAL + help + If you want to be able to use the DSP56001 in Falcons, say Y. This + driver is still experimental, and if you don't know what it is, or + if you don't have this processor, just say N. + + To compile this driver as a module, choose M here. + +config AMIGA_BUILTIN_SERIAL + tristate "Amiga builtin serial support" + depends on AMIGA + help + If you want to use your Amiga's built-in serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config MULTIFACE_III_TTY + tristate "Multiface Card III serial support" + depends on AMIGA + help + If you want to use a Multiface III card's serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config HPDCA + tristate "HP DCA serial support" + depends on DIO && SERIAL_8250 + help + If you want to use the internal "DCA" serial ports on an HP300 + machine, say Y here. + +config HPAPCI + tristate "HP APCI serial support" + depends on HP300 && SERIAL_8250 && EXPERIMENTAL + help + If you want to use the internal "APCI" serial ports on an HP400 + machine, say Y here. + +config DN_SERIAL + bool "Support for DN serial port (dummy)" + depends on APOLLO + +config SERIAL_CONSOLE + bool "Support for serial port console" + depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL) + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + If unsure, say N. + +endmenu + +endif diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.machine index ff46383112a4..ef4a26aff780 100644 --- a/arch/m68k/Kconfig.nommu +++ b/arch/m68k/Kconfig.machine @@ -1,297 +1,142 @@ -config FPU - bool - default n - -config GENERIC_GPIO - bool - default n - -config GENERIC_CMOS_UPDATE - bool - default y - -config GENERIC_CLOCKEVENTS - bool - default n - -config M68000 - bool - select CPU_HAS_NO_BITFIELDS - help - The Freescale (was Motorola) 68000 CPU is the first generation of - the well known M68K family of processors. The CPU core as well as - being available as a stand alone CPU was also used in many - System-On-Chip devices (eg 68328, 68302, etc). It does not contain - a paging MMU. - -config MCPU32 - bool - select CPU_HAS_NO_BITFIELDS - help - The Freescale (was then Motorola) CPU32 is a CPU core that is - based on the 68020 processor. For the most part it is used in - System-On-Chip parts, and does not contain a paging MMU. - -config COLDFIRE - bool - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select CPU_HAS_NO_BITFIELDS - help - The Freescale ColdFire family of processors is a modern derivitive - of the 68000 processor family. They are mainly targeted at embedded - applications, and are all System-On-Chip (SOC) devices, as opposed - to stand alone CPUs. They implement a subset of the original 68000 - processor instruction set. - -config COLDFIRE_SW_A7 - bool - default n - -config HAVE_CACHE_SPLIT - bool - -config HAVE_CACHE_CB - bool - -config HAVE_MBAR - bool - -config HAVE_IPSBAR - bool - -choice - prompt "CPU" - default M68EZ328 - -config M68328 - bool "MC68328" - select M68000 - help - Motorola 68328 processor support. - -config M68EZ328 - bool "MC68EZ328" - select M68000 - help - Motorola 68EX328 processor support. - -config M68VZ328 - bool "MC68VZ328" - select M68000 - help - Motorola 68VZ328 processor support. - -config M68360 - bool "MC68360" - select MCPU32 - help - Motorola 68360 processor support. - -config M5206 - bool "MCF5206" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5206 processor support. +comment "Machine Types" + +config AMIGA + bool "Amiga support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the Amiga series of computers. If + you plan to use this kernel on an Amiga, say Y here and browse the + material available in <file:Documentation/m68k>; otherwise say N. + +config ATARI + bool "Atari support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the 68000-based Atari series of + computers (including the TT, Falcon and Medusa). If you plan to use + this kernel on an Atari, say Y here and browse the material + available in <file:Documentation/m68k>; otherwise say N. + +config MAC + bool "Macintosh support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the Apple Macintosh series of + computers (yes, there is experimental support now, at least for part + of the series). + + Say N unless you're willing to code the remaining necessary support. + ;) + +config APOLLO + bool "Apollo support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to run Linux on an MC680x0-based Apollo + Domain workstation such as the DN3500. + +config VME + bool "VME (Motorola and BVM) support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to build a kernel for a 680x0 based VME + board. Boards currently supported include Motorola boards MVME147, + MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and + BVME6000 boards from BVM Ltd are also supported. + +config MVME147 + bool "MVME147 support" + depends on MMU + depends on VME + help + Say Y to include support for early Motorola VME boards. This will + build a kernel which can run on MVME147 single-board computers. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config MVME16x + bool "MVME162, 166 and 167 support" + depends on MMU + depends on VME + help + Say Y to include support for Motorola VME boards. This will build a + kernel which can run on MVME162, MVME166, MVME167, MVME172, and + MVME177 boards. If you select this option you will have to select + the appropriate drivers for SCSI, Ethernet and serial ports later + on. + +config BVME6000 + bool "BVME4000 and BVME6000 support" + depends on MMU + depends on VME + help + Say Y to include support for VME boards from BVM Ltd. This will + build a kernel which can run on BVME4000 and BVME6000 boards. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config HP300 + bool "HP9000/300 and HP9000/400 support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the HP9000/300 and HP9000/400 series + of workstations. Support for these machines is still somewhat + experimental. If you plan to try to use the kernel on such a machine + say Y here. + Everybody else says N. + +config SUN3X + bool "Sun3x support" + depends on MMU + select MMU_MOTOROLA if MMU + select M68030 + help + This option enables support for the Sun 3x series of workstations. + Be warned that this support is very experimental. + Note that Sun 3x kernels are not compatible with Sun 3 hardware. + General Linux information on the Sun 3x series (now discontinued) + is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. + + If you don't want to compile a kernel for a Sun 3x, say N. + +config Q40 + bool "Q40/Q60 support" + depends on MMU + select MMU_MOTOROLA if MMU + help + The Q40 is a Motorola 68040-based successor to the Sinclair QL + manufactured in Germany. There is an official Q40 home page at + <http://www.q40.de/>. This option enables support for the Q40 and + Q60. Select your CPU below. For 68LC060 don't forget to enable FPU + emulation. + +config SUN3 + bool "Sun3 support" + depends on MMU + depends on !MMU_MOTOROLA + select MMU_SUN3 if MMU + select M68020 + help + This option enables support for the Sun 3 series of workstations + (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires + that all other hardware types must be disabled, as Sun 3 kernels + are incompatible with all other m68k targets (including Sun 3x!). + + If you don't want to compile a kernel exclusively for a Sun 3, say N. -config M5206e - bool "MCF5206e" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5206e processor support. - -config M520x - bool "MCF520x" - select COLDFIRE - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - help - Freescale Coldfire 5207/5208 processor support. - -config M523x - bool "MCF523x" - select COLDFIRE - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale Coldfire 5230/1/2/4/5 processor support - -config M5249 - bool "MCF5249" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5249 processor support. - -config M5271 - bool "MCF5271" - select COLDFIRE - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale (Motorola) ColdFire 5270/5271 processor support. - -config M5272 - bool "MCF5272" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5272 processor support. - -config M5275 - bool "MCF5275" - select COLDFIRE - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale (Motorola) ColdFire 5274/5275 processor support. - -config M528x - bool "MCF528x" - select COLDFIRE - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Motorola ColdFire 5280/5282 processor support. - -config M5307 - bool "MCF5307" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_CACHE_CB - select HAVE_MBAR - help - Motorola ColdFire 5307 processor support. - -config M532x - bool "MCF532x" - select COLDFIRE - select HAVE_CACHE_CB - help - Freescale (Motorola) ColdFire 532x processor support. - -config M5407 - bool "MCF5407" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_CACHE_CB - select HAVE_MBAR - help - Motorola ColdFire 5407 processor support. - -config M547x - bool "MCF547x" - select COLDFIRE - select HAVE_CACHE_CB - select HAVE_MBAR - help - Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. - -config M548x - bool "MCF548x" - select COLDFIRE - select HAVE_CACHE_CB - select HAVE_MBAR - help - Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. - -endchoice - -config M527x - bool - depends on (M5271 || M5275) - select GENERIC_CLOCKEVENTS - default y - -config M54xx +config PILOT bool - depends on (M548x || M547x) - default y - -config CLOCK_SET - bool "Enable setting the CPU clock frequency" - default n - help - On some CPU's you do not need to know what the core CPU clock - frequency is. On these you can disable clock setting. On some - traditional 68K parts, and on all ColdFire parts you need to set - the appropriate CPU clock frequency. On these devices many of the - onboard peripherals derive their timing from the master CPU clock - frequency. - -config CLOCK_FREQ - int "Set the core clock frequency" - default "66666666" - depends on CLOCK_SET - help - Define the CPU clock frequency in use. This is the core clock - frequency, it may or may not be the same as the external clock - crystal fitted to your board. Some processors have an internal - PLL and can have their frequency programmed at run time, others - use internal dividers. In general the kernel won't setup a PLL - if it is fitted (there are some exceptions). This value will be - specific to the exact CPU that you are using. - -config OLDMASK - bool "Old mask 5307 (1H55J) silicon" - depends on M5307 - help - Build support for the older revision ColdFire 5307 silicon. - Specifically this is the 1H55J mask revision. - -if HAVE_CACHE_SPLIT -choice - prompt "Split Cache Configuration" - default CACHE_I - -config CACHE_I - bool "Instruction" - help - Use all of the ColdFire CPU cache memory as an instruction cache. - -config CACHE_D - bool "Data" - help - Use all of the ColdFire CPU cache memory as a data cache. - -config CACHE_BOTH - bool "Both" - help - Split the ColdFire CPU cache, and use half as an instruction cache - and half as a data cache. -endchoice -endif - -if HAVE_CACHE_CB -choice - prompt "Data cache mode" - default CACHE_WRITETHRU - -config CACHE_WRITETHRU - bool "Write-through" - help - The ColdFire CPU cache is set into Write-through mode. - -config CACHE_COPYBACK - bool "Copy-back" - help - The ColdFire CPU cache is set into Copy-back mode. -endchoice -endif - -comment "Platform" config PILOT3 bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" depends on M68328 + select PILOT help Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. @@ -302,7 +147,7 @@ config XCOPILOT_BUGS Support the bugs of Xcopilot. config UC5272 - bool 'Arcturus Networks uC5272 dimm board support' + bool "Arcturus Networks uC5272 dimm board support" depends on M5272 help Support for the Arcturus Networks uC5272 dimm board. @@ -356,15 +201,23 @@ config UCQUICC help Support for the Lineo uCquicc board. +config ARNEWSH + bool + config ARN5206 bool "Arnewsh 5206 board support" depends on M5206 + select ARNEWSH help Support for the Arnewsh 5206 board. +config FREESCALE + bool + config M5206eC3 bool "Motorola M5206eC3 board support" depends on M5206e + select FREESCALE help Support for the Motorola M5206eC3 board. @@ -377,75 +230,92 @@ config ELITE config M5208EVB bool "Freescale M5208EVB board support" depends on M520x + select FREESCALE help Support for the Freescale Coldfire M5208EVB. config M5235EVB bool "Freescale M5235EVB support" depends on M523x + select FREESCALE help Support for the Freescale M5235EVB board. config M5249C3 bool "Motorola M5249C3 board support" depends on M5249 + select FREESCALE help Support for the Motorola M5249C3 board. config M5271EVB bool "Freescale (Motorola) M5271EVB board support" depends on M5271 + select FREESCALE help Support for the Freescale (Motorola) M5271EVB board. config M5275EVB bool "Freescale (Motorola) M5275EVB board support" depends on M5275 + select FREESCALE help Support for the Freescale (Motorola) M5275EVB board. config M5272C3 bool "Motorola M5272C3 board support" depends on M5272 + select FREESCALE help Support for the Motorola M5272C3 board. +config senTec + bool + config COBRA5272 bool "senTec COBRA5272 board support" depends on M5272 + select senTec help Support for the senTec COBRA5272 board. +config AVNET + bool + config AVNET5282 bool "Avnet 5282 board support" depends on M528x + select AVNET help - Support for the Avnet 5282 board. - + Support for the Avnet 5282 board. + config M5282EVB bool "Motorola M5282EVB board support" depends on M528x + select FREESCALE help Support for the Motorola M5282EVB board. config COBRA5282 bool "senTec COBRA5282 board support" depends on M528x + select senTec help Support for the senTec COBRA5282 board. - + config SOM5282EM bool "EMAC.Inc SOM5282EM board support" depends on M528x + select EMAC_INC help - Support for the EMAC.Inc SOM5282EM module. - + Support for the EMAC.Inc SOM5282EM module. + config WILDFIRE bool "Intec Automation Inc. WildFire board support" depends on M528x help Support for the Intec Automation Inc. WildFire. - + config WILDFIREMOD bool "Intec Automation Inc. WildFire module support" depends on M528x @@ -455,12 +325,14 @@ config WILDFIREMOD config ARN5307 bool "Arnewsh 5307 board support" depends on M5307 + select ARNEWSH help Support for the Arnewsh 5307 board. config M5307C3 bool "Motorola M5307C3 board support" depends on M5307 + select FREESCALE help Support for the Motorola M5307C3 board. @@ -473,6 +345,7 @@ config SECUREEDGEMP3 config M5329EVB bool "Freescale (Motorola) M5329EVB board support" depends on M532x + select FREESCALE help Support for the Freescale (Motorola) M5329EVB board. @@ -485,6 +358,7 @@ config COBRA5329 config M5407C3 bool "Motorola M5407C3 board support" depends on M5407 + select FREESCALE help Support for the Motorola M5407C3 board. @@ -524,9 +398,13 @@ config SNAPGEAR help Special additional support for SnapGear router boards. +config SNEHA + bool + config CPU16B bool "Sneha Technologies S.L. Sarasvati board support" depends on M5272 + select SNEHA help Support for the SNEHA CPU16B board. @@ -536,63 +414,20 @@ config MOD5272 help Support for the Netburner MOD-5272 board. +config SAVANT + bool + config SAVANTrosie1 bool "Savant Rosie1 board support" depends on M523x + select SAVANT help Support for the Savant Rosie1 board. -config ROMFS_FROM_ROM - bool "ROMFS image not RAM resident" - depends on (NETtel || SNAPGEAR) - help - The ROMfs filesystem will stay resident in the FLASH/ROM, not be - moved into RAM. - -config PILOT - bool - default y - depends on (PILOT3 || PILOT5) - -config ARNEWSH - bool - default y - depends on (ARN5206 || ARN5307) - -config FREESCALE - bool - default y - depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3) - -config HW_FEITH - bool - default y - depends on (CLEOPATRA || CANCam || SCALES) - -config senTec - bool - default y - depends on (COBRA5272 || COBRA5282) - -config EMAC_INC - bool - default y - depends on (SOM5282EM) -config SNEHA - bool - default y - depends on CPU16B +if !MMU || COLDFIRE -config SAVANT - bool - default y - depends on SAVANTrosie1 - -config AVNET - bool - default y - depends on (AVNET5282) +comment "Machine Options" config UBOOT bool "Support for U-Boot command line parameters" @@ -673,33 +508,6 @@ config KERNELBASE a system with the RAM based at address 0, and leaving enough room for the theoretical maximum number of 256 vectors. -choice - prompt "RAM bus width" - default RAMAUTOBIT - -config RAMAUTOBIT - bool "AUTO" - help - Select the physical RAM data bus size. Not needed on most platforms, - so you can generally choose AUTO. - -config RAM8BIT - bool "8bit" - help - Configure RAM bus to be 8 bits wide. - -config RAM16BIT - bool "16bit" - help - Configure RAM bus to be 16 bits wide. - -config RAM32BIT - bool "32bit" - help - Configure RAM bus to be 32 bits wide. - -endchoice - comment "ROM configuration" config ROM @@ -772,16 +580,4 @@ config ROMKERNEL endchoice -if COLDFIRE -source "kernel/Kconfig.preempt" endif - -source "kernel/time/Kconfig" - -config ISA_DMA_API - bool - depends on !M5272 - default y - -source "drivers/pcmcia/Kconfig" - diff --git a/arch/m68k/Kconfig.mmu b/arch/m68k/Kconfig.mmu deleted file mode 100644 index 13e20bbc4079..000000000000 --- a/arch/m68k/Kconfig.mmu +++ /dev/null @@ -1,411 +0,0 @@ -config GENERIC_IOMAP - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - depends on BROKEN && (Q40 || SUN3X) - default y - -config ARCH_USES_GETTIMEOFFSET - def_bool y - -config EISA - bool - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -config MCA - bool - help - MicroChannel Architecture is found in some IBM PS/2 machines and - laptops. It is a bus system similar to PCI or ISA. See - <file:Documentation/mca.txt> (and especially the web page given - there) before attempting to build an MCA bus kernel. - -config PCMCIA - tristate - ---help--- - Say Y here if you want to attach PCMCIA- or PC-cards to your Linux - computer. These are credit-card size devices such as network cards, - modems or hard drives often used with laptops computers. There are - actually two varieties of these cards: the older 16 bit PCMCIA cards - and the newer 32 bit CardBus cards. If you want to use CardBus - cards, you need to say Y here and also to "CardBus support" below. - - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). Please also read the PCMCIA-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as modules, choose M here: the - modules will be called pcmcia_core and ds. - -config AMIGA - bool "Amiga support" - select MMU_MOTOROLA if MMU - help - This option enables support for the Amiga series of computers. If - you plan to use this kernel on an Amiga, say Y here and browse the - material available in <file:Documentation/m68k>; otherwise say N. - -config ATARI - bool "Atari support" - select MMU_MOTOROLA if MMU - help - This option enables support for the 68000-based Atari series of - computers (including the TT, Falcon and Medusa). If you plan to use - this kernel on an Atari, say Y here and browse the material - available in <file:Documentation/m68k>; otherwise say N. - -config MAC - bool "Macintosh support" - select MMU_MOTOROLA if MMU - help - This option enables support for the Apple Macintosh series of - computers (yes, there is experimental support now, at least for part - of the series). - - Say N unless you're willing to code the remaining necessary support. - ;) - -config NUBUS - bool - depends on MAC - default y - -config M68K_L2_CACHE - bool - depends on MAC - default y - -config APOLLO - bool "Apollo support" - select MMU_MOTOROLA if MMU - help - Say Y here if you want to run Linux on an MC680x0-based Apollo - Domain workstation such as the DN3500. - -config VME - bool "VME (Motorola and BVM) support" - select MMU_MOTOROLA if MMU - help - Say Y here if you want to build a kernel for a 680x0 based VME - board. Boards currently supported include Motorola boards MVME147, - MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and - BVME6000 boards from BVM Ltd are also supported. - -config MVME147 - bool "MVME147 support" - depends on VME - help - Say Y to include support for early Motorola VME boards. This will - build a kernel which can run on MVME147 single-board computers. If - you select this option you will have to select the appropriate - drivers for SCSI, Ethernet and serial ports later on. - -config MVME16x - bool "MVME162, 166 and 167 support" - depends on VME - help - Say Y to include support for Motorola VME boards. This will build a - kernel which can run on MVME162, MVME166, MVME167, MVME172, and - MVME177 boards. If you select this option you will have to select - the appropriate drivers for SCSI, Ethernet and serial ports later - on. - -config BVME6000 - bool "BVME4000 and BVME6000 support" - depends on VME - help - Say Y to include support for VME boards from BVM Ltd. This will - build a kernel which can run on BVME4000 and BVME6000 boards. If - you select this option you will have to select the appropriate - drivers for SCSI, Ethernet and serial ports later on. - -config HP300 - bool "HP9000/300 and HP9000/400 support" - select MMU_MOTOROLA if MMU - help - This option enables support for the HP9000/300 and HP9000/400 series - of workstations. Support for these machines is still somewhat - experimental. If you plan to try to use the kernel on such a machine - say Y here. - Everybody else says N. - -config DIO - bool "DIO bus support" - depends on HP300 - default y - help - Say Y here to enable support for the "DIO" expansion bus used in - HP300 machines. If you are using such a system you almost certainly - want this. - -config SUN3X - bool "Sun3x support" - select MMU_MOTOROLA if MMU - select M68030 - help - This option enables support for the Sun 3x series of workstations. - Be warned that this support is very experimental. - Note that Sun 3x kernels are not compatible with Sun 3 hardware. - General Linux information on the Sun 3x series (now discontinued) - is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. - - If you don't want to compile a kernel for a Sun 3x, say N. - -config Q40 - bool "Q40/Q60 support" - select MMU_MOTOROLA if MMU - help - The Q40 is a Motorola 68040-based successor to the Sinclair QL - manufactured in Germany. There is an official Q40 home page at - <http://www.q40.de/>. This option enables support for the Q40 and - Q60. Select your CPU below. For 68LC060 don't forget to enable FPU - emulation. - -config SUN3 - bool "Sun3 support" - depends on !MMU_MOTOROLA - select MMU_SUN3 if MMU - select M68020 - help - This option enables support for the Sun 3 series of workstations - (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires - that all other hardware types must be disabled, as Sun 3 kernels - are incompatible with all other m68k targets (including Sun 3x!). - - If you don't want to compile a kernel exclusively for a Sun 3, say N. - -config NATFEAT - bool "ARAnyM emulator support" - depends on ATARI - help - This option enables support for ARAnyM native features, such as - access to a disk image as /dev/hda. - -config NFBLOCK - tristate "NatFeat block device support" - depends on BLOCK && NATFEAT - help - Say Y to include support for the ARAnyM NatFeat block device - which allows direct access to the hard drives without using - the hardware emulation. - -config NFCON - tristate "NatFeat console driver" - depends on NATFEAT - help - Say Y to include support for the ARAnyM NatFeat console driver - which allows the console output to be redirected to the stderr - output of ARAnyM. - -config NFETH - tristate "NatFeat Ethernet support" - depends on NET_ETHERNET && NATFEAT - help - Say Y to include support for the ARAnyM NatFeat network device - which will emulate a regular ethernet device while presenting an - ethertap device to the host system. - -comment "Processor type" - -config M68020 - bool "68020 support" - help - If you anticipate running this kernel on a computer with a MC68020 - processor, say Y. Otherwise, say N. Note that the 68020 requires a - 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the - Sun 3, which provides its own version. - -config M68030 - bool "68030 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68030 - processor, say Y. Otherwise, say N. Note that a MC68EC030 will not - work, as it does not include an MMU (Memory Management Unit). - -config M68040 - bool "68040 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68LC040 - or MC68040 processor, say Y. Otherwise, say N. Note that an - MC68EC040 will not work, as it does not include an MMU (Memory - Management Unit). - -config M68060 - bool "68060 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68060 - processor, say Y. Otherwise, say N. - -config MMU_MOTOROLA - bool - -config MMU_SUN3 - bool - depends on MMU && !MMU_MOTOROLA - -config M68KFPU_EMU - bool "Math emulation support (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - At some point in the future, this will cause floating-point math - instructions to be emulated by the kernel on machines that lack a - floating-point math coprocessor. Thrill-seekers and chronically - sleep-deprived psychotic hacker types can say Y now, everyone else - should probably wait a while. - -config M68KFPU_EMU_EXTRAPREC - bool "Math emulation extra precision" - depends on M68KFPU_EMU - help - The fpu uses normally a few bit more during calculations for - correct rounding, the emulator can (often) do the same but this - extra calculation can cost quite some time, so you can disable - it here. The emulator will then "only" calculate with a 64 bit - mantissa and round slightly incorrect, what is more than enough - for normal usage. - -config M68KFPU_EMU_ONLY - bool "Math emulation only kernel" - depends on M68KFPU_EMU - help - This option prevents any floating-point instructions from being - compiled into the kernel, thereby the kernel doesn't save any - floating point context anymore during task switches, so this - kernel will only be usable on machines without a floating-point - math coprocessor. This makes the kernel a bit faster as no tests - needs to be executed whether a floating-point instruction in the - kernel should be executed or not. - -config ADVANCED - bool "Advanced configuration options" - ---help--- - This gives you access to some advanced options for the CPU. The - defaults should be fine for most users, but these options may make - it possible for you to improve performance somewhat if you know what - you are doing. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about these options. - - Most users should say N to this question. - -config RMW_INSNS - bool "Use read-modify-write instructions" - depends on ADVANCED - ---help--- - This allows to use certain instructions that work with indivisible - read-modify-write bus cycles. While this is faster than the - workaround of disabling interrupts, it can conflict with DMA - ( = direct memory access) on many Amiga systems, and it is also said - to destabilize other machines. It is very likely that this will - cause serious problems on any Amiga or Atari Medusa if set. The only - configuration where it should work are 68030-based Ataris, where it - apparently improves performance. But you've been warned! Unless you - really know what you are doing, say N. Try Y only if you're quite - adventurous. - -config SINGLE_MEMORY_CHUNK - bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 - default y if SUN3 - select NEED_MULTIPLE_NODES - help - Ignore all but the first contiguous chunk of physical memory for VM - purposes. This will save a few bytes kernel size and may speed up - some operations. Say N if not sure. - -config 060_WRITETHROUGH - bool "Use write-through caching for 68060 supervisor accesses" - depends on ADVANCED && M68060 - ---help--- - The 68060 generally uses copyback caching of recently accessed data. - Copyback caching means that memory writes will be held in an on-chip - cache and only written back to memory some time later. Saying Y - here will force supervisor (kernel) accesses to use writethrough - caching. Writethrough caching means that data is written to memory - straight away, so that cache and memory data always agree. - Writethrough caching is less efficient, but is needed for some - drivers on 68060 based systems where the 68060 bus snooping signal - is hardwired on. The 53c710 SCSI driver is known to suffer from - this problem. - -config ARCH_DISCONTIGMEM_ENABLE - def_bool !SINGLE_MEMORY_CHUNK - -config NODES_SHIFT - int - default "3" - depends on !SINGLE_MEMORY_CHUNK - -config ZORRO - bool "Amiga Zorro (AutoConfig) bus support" - depends on AMIGA - help - This enables support for the Zorro bus in the Amiga. If you have - expansion cards in your Amiga that conform to the Amiga - AutoConfig(tm) specification, say Y, otherwise N. Note that even - expansion cards that do not fit in the Zorro slots but fit in e.g. - the CPU slot may fall in this category, so you have to say Y to let - Linux use these. - -config AMIGA_PCMCIA - bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)" - depends on AMIGA && EXPERIMENTAL - help - Include support in the kernel for pcmcia on Amiga 1200 and Amiga - 600. If you intend to use pcmcia cards say Y; otherwise say N. - -config HEARTBEAT - bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 - default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. - -# We have a dedicated heartbeat LED. :-) -config PROC_HARDWARE - bool "/proc/hardware support" - help - Say Y here to support the /proc/hardware file, which gives you - access to information about the machine you're running on, - including the model, CPU, MMU, clock speed, BogoMIPS rating, - and memory size. - -config ISA - bool - depends on Q40 || AMIGA_PCMCIA - default y - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. Other bus systems are PCI, EISA, MicroChannel - (MCA) or VESA. ISA is an older system, now being displaced by PCI; - newer boards don't support it. If you have ISA, say Y, otherwise N. - -config GENERIC_ISA_DMA - bool - depends on Q40 || AMIGA_PCMCIA - default y - -source "drivers/pci/Kconfig" - -source "drivers/zorro/Kconfig" - diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index be46cadd4017..cf318f20c64d 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -1,7 +1,171 @@ +# +# m68k/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Hamish Macdonald +# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com> +# + KBUILD_DEFCONFIG := multi_defconfig +# +# Enable processor type. Ordering of these is important - we want to +# use the minimum processor type of the range we support. The logic +# for 680x0 will only allow use of the -m68060 or -m68040 if no other +# 680x0 type is specified - and no option is specified for 68030 or +# 68020. The other m68k/ColdFire types always specify some type of +# compiler cpu type flag. +# +ifndef CONFIG_M68040 +cpuflags-$(CONFIG_M68060) := -m68060 +endif +ifndef CONFIG_M68060 +cpuflags-$(CONFIG_M68040) := -m68040 +endif +cpuflags-$(CONFIG_M68030) := +cpuflags-$(CONFIG_M68020) := +cpuflags-$(CONFIG_M68360) := -m68332 +cpuflags-$(CONFIG_M68000) := -m68000 +cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200) +cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200) +cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) +cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200) +cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307) +cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) +cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307) +cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307) +cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307) +cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200) +cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200) +cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200) +cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200) + +KBUILD_AFLAGS += $(cpuflags-y) +KBUILD_CFLAGS += $(cpuflags-y) -pipe ifdef CONFIG_MMU -include $(srctree)/arch/m68k/Makefile_mm +# without -fno-strength-reduce the 53c7xx.c driver fails ;-( +KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2 +else +# we can use a m68k-linux-gcc toolchain with these in place +KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" +KBUILD_CFLAGS += -D__uClinux__ +KBUILD_AFLAGS += -D__uClinux__ +endif + +LDFLAGS := -m m68kelf +KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, \ + m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-) + endif +endif + +ifdef CONFIG_SUN3 +LDFLAGS_vmlinux = -N +endif + +CHECKFLAGS += -D__mc68000__ + + +ifdef CONFIG_KGDB +# If configured for kgdb support, include debugging infos and keep the +# frame pointer +KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g +endif + +# +# Select the assembler head startup code. Order is important. The default +# head code is first, processor specific selections can override it after. +# +head-y := arch/m68k/kernel/head.o +head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o +head-$(CONFIG_M68360) := arch/m68k/platform/68360/head.o +head-$(CONFIG_M68000) := arch/m68k/platform/68328/head.o +head-$(CONFIG_COLDFIRE) := arch/m68k/platform/coldfire/head.o + +core-y += arch/m68k/kernel/ arch/m68k/mm/ +libs-y += arch/m68k/lib/ + +core-$(CONFIG_Q40) += arch/m68k/q40/ +core-$(CONFIG_AMIGA) += arch/m68k/amiga/ +core-$(CONFIG_ATARI) += arch/m68k/atari/ +core-$(CONFIG_MAC) += arch/m68k/mac/ +core-$(CONFIG_HP300) += arch/m68k/hp300/ +core-$(CONFIG_APOLLO) += arch/m68k/apollo/ +core-$(CONFIG_MVME147) += arch/m68k/mvme147/ +core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/ +core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/ +core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/ +core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/ +core-$(CONFIG_NATFEAT) += arch/m68k/emu/ +core-$(CONFIG_M68040) += arch/m68k/fpsp040/ +core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ +core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ +core-$(CONFIG_M68360) += arch/m68k/platform/68360/ +core-$(CONFIG_M68000) += arch/m68k/platform/68328/ +core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/ +core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/ +core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/ +core-$(CONFIG_M5206) += arch/m68k/platform/5206/ +core-$(CONFIG_M5206e) += arch/m68k/platform/5206/ +core-$(CONFIG_M520x) += arch/m68k/platform/520x/ +core-$(CONFIG_M523x) += arch/m68k/platform/523x/ +core-$(CONFIG_M5249) += arch/m68k/platform/5249/ +core-$(CONFIG_M527x) += arch/m68k/platform/527x/ +core-$(CONFIG_M5272) += arch/m68k/platform/5272/ +core-$(CONFIG_M528x) += arch/m68k/platform/528x/ +core-$(CONFIG_M5307) += arch/m68k/platform/5307/ +core-$(CONFIG_M532x) += arch/m68k/platform/532x/ +core-$(CONFIG_M5407) += arch/m68k/platform/5407/ +core-$(CONFIG_M54xx) += arch/m68k/platform/54xx/ + + +all: zImage + +lilo: vmlinux + if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi + if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi + cat vmlinux > $(INSTALL_PATH)/vmlinux + cp System.map $(INSTALL_PATH)/System.map + if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi + +zImage compressed: vmlinux.gz + +vmlinux.gz: vmlinux + +ifndef CONFIG_KGDB + cp vmlinux vmlinux.tmp + $(STRIP) vmlinux.tmp + gzip -9c vmlinux.tmp >vmlinux.gz + rm vmlinux.tmp else -include $(srctree)/arch/m68k/Makefile_no + gzip -9c vmlinux >vmlinux.gz endif + +bzImage: vmlinux.bz2 + +vmlinux.bz2: vmlinux + +ifndef CONFIG_KGDB + cp vmlinux vmlinux.tmp + $(STRIP) vmlinux.tmp + bzip2 -1c vmlinux.tmp >vmlinux.bz2 + rm vmlinux.tmp +else + bzip2 -1c vmlinux >vmlinux.bz2 +endif + +archclean: + rm -f vmlinux.gz vmlinux.bz2 + +install: + sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)" diff --git a/arch/m68k/Makefile_mm b/arch/m68k/Makefile_mm deleted file mode 100644 index d449b6d5aecf..000000000000 --- a/arch/m68k/Makefile_mm +++ /dev/null @@ -1,121 +0,0 @@ -# -# m68k/Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Hamish Macdonald -# - -# override top level makefile -AS += -m68020 -LDFLAGS := -m m68kelf -KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds -ifneq ($(SUBARCH),$(ARCH)) - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, \ - m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-) - endif -endif - -ifdef CONFIG_SUN3 -LDFLAGS_vmlinux = -N -endif - -CHECKFLAGS += -D__mc68000__ - -# without -fno-strength-reduce the 53c7xx.c driver fails ;-( -KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2 - -# enable processor switch if compiled only for a single cpu -ifndef CONFIG_M68020 -ifndef CONFIG_M68030 - -ifndef CONFIG_M68060 -KBUILD_CFLAGS += -m68040 -endif - -ifndef CONFIG_M68040 -KBUILD_CFLAGS += -m68060 -endif - -endif -endif - -ifdef CONFIG_KGDB -# If configured for kgdb support, include debugging infos and keep the -# frame pointer -KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g -endif - -ifndef CONFIG_SUN3 -head-y := arch/m68k/kernel/head.o -else -head-y := arch/m68k/kernel/sun3-head.o -endif - -core-y += arch/m68k/kernel/ arch/m68k/mm/ -libs-y += arch/m68k/lib/ - -core-$(CONFIG_Q40) += arch/m68k/q40/ -core-$(CONFIG_AMIGA) += arch/m68k/amiga/ -core-$(CONFIG_ATARI) += arch/m68k/atari/ -core-$(CONFIG_MAC) += arch/m68k/mac/ -core-$(CONFIG_HP300) += arch/m68k/hp300/ -core-$(CONFIG_APOLLO) += arch/m68k/apollo/ -core-$(CONFIG_MVME147) += arch/m68k/mvme147/ -core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/ -core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/ -core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/ -core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/ -core-$(CONFIG_NATFEAT) += arch/m68k/emu/ -core-$(CONFIG_M68040) += arch/m68k/fpsp040/ -core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ -core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ - -all: zImage - -lilo: vmlinux - if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi - if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi - cat vmlinux > $(INSTALL_PATH)/vmlinux - cp System.map $(INSTALL_PATH)/System.map - if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi - -zImage compressed: vmlinux.gz - -vmlinux.gz: vmlinux - -ifndef CONFIG_KGDB - cp vmlinux vmlinux.tmp - $(STRIP) vmlinux.tmp - gzip -9c vmlinux.tmp >vmlinux.gz - rm vmlinux.tmp -else - gzip -9c vmlinux >vmlinux.gz -endif - -bzImage: vmlinux.bz2 - -vmlinux.bz2: vmlinux - -ifndef CONFIG_KGDB - cp vmlinux vmlinux.tmp - $(STRIP) vmlinux.tmp - bzip2 -1c vmlinux.tmp >vmlinux.bz2 - rm vmlinux.tmp -else - bzip2 -1c vmlinux >vmlinux.bz2 -endif - -archclean: - rm -f vmlinux.gz vmlinux.bz2 - -install: - sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)" diff --git a/arch/m68k/Makefile_no b/arch/m68k/Makefile_no deleted file mode 100644 index 844d3f172264..000000000000 --- a/arch/m68k/Makefile_no +++ /dev/null @@ -1,124 +0,0 @@ -# -# arch/m68k/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com> -# - -platform-$(CONFIG_M68328) := 68328 -platform-$(CONFIG_M68EZ328) := 68EZ328 -platform-$(CONFIG_M68VZ328) := 68VZ328 -platform-$(CONFIG_M68360) := 68360 -platform-$(CONFIG_M5206) := 5206 -platform-$(CONFIG_M5206e) := 5206 -platform-$(CONFIG_M520x) := 520x -platform-$(CONFIG_M523x) := 523x -platform-$(CONFIG_M5249) := 5249 -platform-$(CONFIG_M527x) := 527x -platform-$(CONFIG_M5272) := 5272 -platform-$(CONFIG_M528x) := 528x -platform-$(CONFIG_M5307) := 5307 -platform-$(CONFIG_M532x) := 532x -platform-$(CONFIG_M5407) := 5407 -platform-$(CONFIG_M54xx) := 54xx -PLATFORM := $(platform-y) - -board-$(CONFIG_PILOT) := pilot -board-$(CONFIG_UC5272) := UC5272 -board-$(CONFIG_UC5282) := UC5282 -board-$(CONFIG_UCSIMM) := ucsimm -board-$(CONFIG_UCDIMM) := ucdimm -board-$(CONFIG_UCQUICC) := uCquicc -board-$(CONFIG_DRAGEN2) := de2 -board-$(CONFIG_ARNEWSH) := ARNEWSH -board-$(CONFIG_FREESCALE) := FREESCALE -board-$(CONFIG_M5235EVB) := M5235EVB -board-$(CONFIG_M5271EVB) := M5271EVB -board-$(CONFIG_M5275EVB) := M5275EVB -board-$(CONFIG_M5282EVB) := M5282EVB -board-$(CONFIG_ELITE) := eLITE -board-$(CONFIG_NETtel) := NETtel -board-$(CONFIG_SECUREEDGEMP3) := MP3 -board-$(CONFIG_CLEOPATRA) := CLEOPATRA -board-$(CONFIG_senTec) := senTec -board-$(CONFIG_SNEHA) := SNEHA -board-$(CONFIG_M5208EVB) := M5208EVB -board-$(CONFIG_MOD5272) := MOD5272 -board-$(CONFIG_AVNET) := AVNET -board-$(CONFIG_SAVANT) := SAVANT -BOARD := $(board-y) - -model-$(CONFIG_RAMKERNEL) := ram -model-$(CONFIG_ROMKERNEL) := rom -MODEL := $(model-y) - -# -# Some code support is grouped together for a common cpu-subclass (for -# example all ColdFire cpu's are very similar). Determine the sub-class -# for the selected cpu. ONLY need to define this for the non-base member -# of the family. -# -cpuclass-$(CONFIG_M5206) := coldfire -cpuclass-$(CONFIG_M5206e) := coldfire -cpuclass-$(CONFIG_M520x) := coldfire -cpuclass-$(CONFIG_M523x) := coldfire -cpuclass-$(CONFIG_M5249) := coldfire -cpuclass-$(CONFIG_M527x) := coldfire -cpuclass-$(CONFIG_M5272) := coldfire -cpuclass-$(CONFIG_M528x) := coldfire -cpuclass-$(CONFIG_M5307) := coldfire -cpuclass-$(CONFIG_M532x) := coldfire -cpuclass-$(CONFIG_M5407) := coldfire -cpuclass-$(CONFIG_M54xx) := coldfire -cpuclass-$(CONFIG_M68328) := 68328 -cpuclass-$(CONFIG_M68EZ328) := 68328 -cpuclass-$(CONFIG_M68VZ328) := 68328 -cpuclass-$(CONFIG_M68360) := 68360 -CPUCLASS := $(cpuclass-y) - -ifneq ($(CPUCLASS),$(PLATFORM)) -CLASSDIR := arch/m68k/platform/$(cpuclass-y)/ -endif - -export PLATFORM BOARD MODEL CPUCLASS - -# -# Some CFLAG additions based on specific CPU type. -# -cflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200) -cflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200) -cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200) -cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307) -cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200) -cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307) -cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307) -cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) -cflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307) -cflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200) -cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) -cflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200) -cflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200) -cflags-$(CONFIG_M68328) := -m68000 -cflags-$(CONFIG_M68EZ328) := -m68000 -cflags-$(CONFIG_M68VZ328) := -m68000 -cflags-$(CONFIG_M68360) := -m68332 - -KBUILD_AFLAGS += $(cflags-y) - -KBUILD_CFLAGS += $(cflags-y) -KBUILD_CFLAGS += -D__linux__ -KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" - -head-y := arch/m68k/platform/$(cpuclass-y)/head.o - -core-y += arch/m68k/kernel/ \ - arch/m68k/mm/ \ - $(CLASSDIR) \ - arch/m68k/platform/$(PLATFORM)/ -libs-y += arch/m68k/lib/ - -archclean: - diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h index 876eec6f2b52..c3c5a8643e15 100644 --- a/arch/m68k/include/asm/entry.h +++ b/arch/m68k/include/asm/entry.h @@ -1,5 +1,254 @@ -#ifdef __uClinux__ -#include "entry_no.h" +#ifndef __M68K_ENTRY_H +#define __M68K_ENTRY_H + +#include <asm/setup.h> +#include <asm/page.h> +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> +#endif + +/* + * Stack layout in 'ret_from_exception': + * + * This allows access to the syscall arguments in registers d1-d5 + * + * 0(sp) - d1 + * 4(sp) - d2 + * 8(sp) - d3 + * C(sp) - d4 + * 10(sp) - d5 + * 14(sp) - a0 + * 18(sp) - a1 + * 1C(sp) - a2 + * 20(sp) - d0 + * 24(sp) - orig_d0 + * 28(sp) - stack adjustment + * 2C(sp) - [ sr ] [ format & vector ] + * 2E(sp) - [ pc-hiword ] [ sr ] + * 30(sp) - [ pc-loword ] [ pc-hiword ] + * 32(sp) - [ format & vector ] [ pc-loword ] + * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ + * M68K COLDFIRE + */ + +/* the following macro is used when enabling interrupts */ +#if defined(MACH_ATARI_ONLY) + /* block out HSYNC on the atari */ +#define ALLOWINT (~0x400) +#define MAX_NOINT_IPL 3 #else -#include "entry_mm.h" + /* portable version */ +#define ALLOWINT (~0x700) +#define MAX_NOINT_IPL 0 +#endif /* machine compilation types */ + +#ifdef __ASSEMBLY__ +/* + * This defines the normal kernel pt-regs layout. + * + * regs a3-a6 and d6-d7 are preserved by C code + * the kernel doesn't mess with usp unless it needs to + */ +#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ + +#ifdef CONFIG_COLDFIRE +#ifdef CONFIG_COLDFIRE_SW_A7 +/* + * This is made a little more tricky on older ColdFires. There is no + * separate supervisor and user stack pointers. Need to artificially + * construct a usp in software... When doing this we need to disable + * interrupts, otherwise bad things will happen. + */ +.globl sw_usp +.globl sw_ksp + +.macro SAVE_ALL_SYS + move #0x2700,%sr /* disable intrs */ + btst #5,%sp@(2) /* from user? */ + bnes 6f /* no, skip */ + movel %sp,sw_usp /* save user sp */ + addql #8,sw_usp /* remove exception */ + movel sw_ksp,%sp /* kernel sp */ + subql #8,%sp /* room for exception */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + movel sw_usp,%a0 /* get usp */ + movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ + movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ + bra 7f + 6: + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + 7: +.endm + +.macro SAVE_ALL_INT + SAVE_ALL_SYS + moveq #-1,%d0 /* not system call entry */ + movel %d0,%sp@(PT_OFF_ORIG_D0) +.endm + +.macro RESTORE_USER + move #0x2700,%sr /* disable intrs */ + movel sw_usp,%a0 /* get usp */ + movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + addql #8,%sp /* remove exception */ + movel %sp,sw_ksp /* save ksp */ + subql #8,sw_usp /* set exception */ + movel sw_usp,%sp /* restore usp */ + rte +.endm + +.macro RDUSP + movel sw_usp,%a3 +.endm + +.macro WRUSP + movel %a3,sw_usp +.endm + +#else /* !CONFIG_COLDFIRE_SW_A7 */ +/* + * Modern ColdFire parts have separate supervisor and user stack + * pointers. Simple load and restore macros for this case. + */ +.macro SAVE_ALL_SYS + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro SAVE_ALL_INT + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + pea -1:w /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro RESTORE_USER + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro RDUSP + /*move %usp,%a3*/ + .word 0x4e6b +.endm + +.macro WRUSP + /*move %a3,%usp*/ + .word 0x4e63 +.endm + +#endif /* !CONFIG_COLDFIRE_SW_A7 */ + +.macro SAVE_SWITCH_STACK + lea %sp@(-24),%sp /* 6 regs */ + moveml %a3-%a6/%d6-%d7,%sp@ +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@,%a3-%a6/%d6-%d7 + lea %sp@(24),%sp /* 6 regs */ +.endm + +#else /* !CONFIG_COLDFIRE */ + +/* + * All other types of m68k parts (68000, 680x0, CPU32) have the same + * entry and exit code. + */ + +/* + * a -1 in the orig_d0 field signifies + * that the stack frame is NOT for syscall + */ +.macro SAVE_ALL_INT + clrl %sp@- /* stk_adj */ + pea -1:w /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro SAVE_ALL_SYS + clrl %sp@- /* stk_adj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro RESTORE_ALL + moveml %sp@+,%a0-%a2/%d1-%d5 + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stk adj */ + rte +.endm + + +.macro SAVE_SWITCH_STACK + moveml %a3-%a6/%d6-%d7,%sp@- +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@+,%a3-%a6/%d6-%d7 +.endm + +#endif /* !CONFIG_COLDFIRE */ + +/* + * Register %a2 is reserved and set to current task on MMU enabled systems. + * Non-MMU systems do not reserve %a2 in this way, and this definition is + * not used for them. + */ +#define curptr a2 + +#define GET_CURRENT(tmp) get_current tmp +.macro get_current reg=%d0 + movel %sp,\reg + andw #-THREAD_SIZE,\reg + movel \reg,%curptr + movel %curptr@,%curptr +.endm + +#else /* C source */ + +#define STR(X) STR1(X) +#define STR1(X) #X + +#define SAVE_ALL_INT \ + "clrl %%sp@-;" /* stk_adj */ \ + "pea -1:w;" /* orig d0 = -1 */ \ + "movel %%d0,%%sp@-;" /* d0 */ \ + "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" + +#define GET_CURRENT(tmp) \ + "movel %%sp,"#tmp"\n\t" \ + "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ + "movel "#tmp",%%a2\n\t" \ + "movel %%a2@,%%a2" + #endif + +#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h deleted file mode 100644 index 73b8c8fbed9c..000000000000 --- a/arch/m68k/include/asm/entry_mm.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef __M68K_ENTRY_H -#define __M68K_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> -#ifdef __ASSEMBLY__ -#include <asm/thread_info.h> -#endif - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - sr - * 2E(sp) - pc - * 32(sp) - format & vector - */ - -/* - * 97/05/14 Andreas: Register %a2 is now set to the current task throughout - * the whole kernel. - */ - -/* the following macro is used when enabling interrupts */ -#if defined(MACH_ATARI_ONLY) - /* block out HSYNC on the atari */ -#define ALLOWINT (~0x400) -#define MAX_NOINT_IPL 3 -#else - /* portable version */ -#define ALLOWINT (~0x700) -#define MAX_NOINT_IPL 0 -#endif /* machine compilation types */ - -#ifdef __ASSEMBLY__ - -#define curptr a2 - -LFLUSH_I_AND_D = 0x00000808 - -#define SAVE_ALL_INT save_all_int -#define SAVE_ALL_SYS save_all_sys -#define RESTORE_ALL restore_all -/* - * This defines the normal kernel pt-regs layout. - * - * regs a3-a6 and d6-d7 are preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -/* - * a -1 in the orig_d0 field signifies - * that the stack frame is NOT for syscall - */ -.macro save_all_int - clrl %sp@- | stk_adj - pea -1:w | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro save_all_sys - clrl %sp@- | stk_adj - movel %d0,%sp@- | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro restore_all - moveml %sp@+,%a0-%a1/%curptr/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp | orig d0 - addl %sp@+,%sp | stk adj - rte -.endm - -#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ - -#define SAVE_SWITCH_STACK save_switch_stack -#define RESTORE_SWITCH_STACK restore_switch_stack -#define GET_CURRENT(tmp) get_current tmp - -.macro save_switch_stack - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro restore_switch_stack - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -.macro get_current reg=%d0 - movel %sp,\reg - andw #-THREAD_SIZE,\reg - movel \reg,%curptr - movel %curptr@,%curptr -.endm - -#else /* C source */ - -#define STR(X) STR1(X) -#define STR1(X) #X - -#define SAVE_ALL_INT \ - "clrl %%sp@-;" /* stk_adj */ \ - "pea -1:w;" /* orig d0 = -1 */ \ - "movel %%d0,%%sp@-;" /* d0 */ \ - "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" -#define GET_CURRENT(tmp) \ - "movel %%sp,"#tmp"\n\t" \ - "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ - "movel "#tmp",%%a2\n\t" \ - "movel %%a2@,%%a2" - -#endif - -#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h deleted file mode 100644 index 68611e3dbb1d..000000000000 --- a/arch/m68k/include/asm/entry_no.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef __M68KNOMMU_ENTRY_H -#define __M68KNOMMU_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - [ sr ] [ format & vector ] - * 2E(sp) - [ pc-hiword ] [ sr ] - * 30(sp) - [ pc-loword ] [ pc-hiword ] - * 32(sp) - [ format & vector ] [ pc-loword ] - * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ - * M68K COLDFIRE - */ - -#define ALLOWINT (~0x700) - -#ifdef __ASSEMBLY__ - -#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ - -/* - * This defines the normal kernel pt-regs layout. - * - * regs are a2-a6 and d6-d7 preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -#ifdef CONFIG_COLDFIRE -#ifdef CONFIG_COLDFIRE_SW_A7 -/* - * This is made a little more tricky on older ColdFires. There is no - * separate supervisor and user stack pointers. Need to artificially - * construct a usp in software... When doing this we need to disable - * interrupts, otherwise bad things will happen. - */ -.globl sw_usp -.globl sw_ksp - -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(2) /* from user? */ - bnes 6f /* no, skip */ - movel %sp,sw_usp /* save user sp */ - addql #8,sw_usp /* remove exception */ - movel sw_ksp,%sp /* kernel sp */ - subql #8,%sp /* room for exception */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ - bra 7f - 6: - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - 7: -.endm - -.macro RESTORE_USER - move #0x2700,%sr /* disable intrs */ - movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - addql #8,%sp /* remove exception */ - movel %sp,sw_ksp /* save ksp */ - subql #8,sw_usp /* set exception */ - movel sw_usp,%sp /* restore usp */ - rte -.endm - -.macro RDUSP - movel sw_usp,%a3 -.endm - -.macro WRUSP - movel %a3,sw_usp -.endm - -#else /* !CONFIG_COLDFIRE_SW_A7 */ -/* - * Modern ColdFire parts have separate supervisor and user stack - * pointers. Simple load and restore macros for this case. - */ -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ -.endm - -.macro RESTORE_USER - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro RDUSP - /*move %usp,%a3*/ - .word 0x4e6b -.endm - -.macro WRUSP - /*move %a3,%usp*/ - .word 0x4e63 -.endm - -#endif /* !CONFIG_COLDFIRE_SW_A7 */ - -.macro SAVE_SWITCH_STACK - lea %sp@(-24),%sp /* 6 regs */ - moveml %a3-%a6/%d6-%d7,%sp@ -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@,%a3-%a6/%d6-%d7 - lea %sp@(24),%sp /* 6 regs */ -.endm - -#else /* !CONFIG_COLDFIRE */ - -/* - * Standard 68k interrupt entry and exit macros. - */ -.macro SAVE_ALL - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - moveml %d1-%d5/%a0-%a2,%sp@- -.endm - -.macro RESTORE_ALL - moveml %sp@+,%a0-%a2/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -#endif /* !COLDFIRE_SW_A7 */ -#endif /* __ASSEMBLY__ */ -#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index b6bf2c518bac..eda62de7e607 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -90,15 +90,13 @@ #define MCFGPIO_PDDR_FECH 0xFC0A4013 #define MCFGPIO_PDDR_FECL 0xFC0A4014 -#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A -#define MCFGPIO_PPDSDR_BE 0xFC0A401B -#define MCFGPIO_PPDSDR_CS 0xFC0A401C -#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D -#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E -#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F -#define MCFGPIO_PPDSDR_UART 0xFC0A4021 -#define MCFGPIO_PPDSDR_FECH 0xFC0A4021 -#define MCFGPIO_PPDSDR_FECL 0xFC0A4022 +#define MCFGPIO_PPDSDR_CS 0xFC0A401A +#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401B +#define MCFGPIO_PPDSDR_QSPI 0xFC0A401C +#define MCFGPIO_PPDSDR_TIMER 0xFC0A401D +#define MCFGPIO_PPDSDR_UART 0xFC0A401E +#define MCFGPIO_PPDSDR_FECH 0xFC0A401F +#define MCFGPIO_PPDSDR_FECL 0xFC0A4020 #define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024 #define MCFGPIO_PCLRR_BE 0xFC0A4025 @@ -113,11 +111,11 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL -#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL +#define MCFGPIO_PODR MCFGPIO_PODR_CS +#define MCFGPIO_PDDR MCFGPIO_PDDR_CS +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_CS +#define MCFGPIO_SETR MCFGPIO_PPDSDR_CS +#define MCFGPIO_CLRR MCFGPIO_PCLRR_CS #define MCFGPIO_PIN_MAX 80 #define MCFGPIO_IRQ_MAX 8 diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h index 39d90d51111d..7fe631972f1f 100644 --- a/arch/m68k/include/asm/mcfqspi.h +++ b/arch/m68k/include/asm/mcfqspi.h @@ -24,9 +24,11 @@ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) #define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) #elif defined(CONFIG_M5249) -#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) -#elif defined(CONFIG_M520x) || defined(CONFIG_M532x) -#define MCFQSPI_IOBASE 0xFC058000 +#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) +#elif defined(CONFIG_M520x) +#define MCFQSPI_IOBASE 0xFC05C000 +#elif defined(CONFIG_M532x) +#define MCFQSPI_IOBASE 0xFC058000 #endif #define MCFQSPI_IOSIZE 0x40 diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h index 90595721185f..a8d1c60eb9ce 100644 --- a/arch/m68k/include/asm/page_no.h +++ b/arch/m68k/include/asm/page_no.h @@ -5,6 +5,9 @@ extern unsigned long memory_start; extern unsigned long memory_end; +extern unsigned long _rambase; +extern unsigned long _ramstart; +extern unsigned long _ramend; #define get_user_page(vaddr) __get_free_page(GFP_KERNEL) #define free_user_page(page, addr) free_page(addr) diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index d8ef53ac03f9..568facf30276 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -135,6 +135,12 @@ do { \ wrusp(_usp); \ } while(0) +static inline int handle_kernel_fault(struct pt_regs *regs) +{ + /* Any fault in kernel is fatal on non-mmu */ + return 0; +} + #endif /* Forward declaration, a strange C thing */ diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h index d64967ecfec6..5277e52715ec 100644 --- a/arch/m68k/include/asm/sections.h +++ b/arch/m68k/include/asm/sections.h @@ -3,4 +3,6 @@ #include <asm-generic/sections.h> +extern char _sbss[], _ebss[]; + #endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index c482ebc9dd54..e7f0f2e5ad44 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -1,5 +1,21 @@ -ifdef CONFIG_MMU -include arch/m68k/kernel/Makefile_mm -else -include arch/m68k/kernel/Makefile_no +# +# Makefile for the linux kernel. +# + +extra-$(CONFIG_MMU) := head.o +extra-$(CONFIG_SUN3) := sun3-head.o +extra-y += vmlinux.lds + +obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ + sys_m68k.o syscalltable.o time.o traps.o + +obj-$(CONFIG_MMU) += ints.o devres.o vectors.o +devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o + +ifndef CONFIG_MMU_SUN3 +obj-y += dma.o endif +ifndef CONFIG_MMU +obj-y += init_task.o irq.o +endif + diff --git a/arch/m68k/kernel/Makefile_mm b/arch/m68k/kernel/Makefile_mm deleted file mode 100644 index aced67804579..000000000000 --- a/arch/m68k/kernel/Makefile_mm +++ /dev/null @@ -1,17 +0,0 @@ -# -# Makefile for the linux kernel. -# - -ifndef CONFIG_SUN3 - extra-y := head.o -else - extra-y := sun3-head.o -endif -extra-y += vmlinux.lds - -obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \ - sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o - -devres-y = ../../../kernel/irq/devres.o - -obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo diff --git a/arch/m68k/kernel/Makefile_no b/arch/m68k/kernel/Makefile_no deleted file mode 100644 index 37c3fc074c0a..000000000000 --- a/arch/m68k/kernel/Makefile_no +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for arch/m68knommu/kernel. -# - -extra-y := vmlinux.lds - -obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \ - setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o - -obj-$(CONFIG_MODULES) += module.o diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S index 5f0f6b598b5a..1b4289061a64 100644 --- a/arch/m68k/kernel/entry_no.S +++ b/arch/m68k/kernel/entry_no.S @@ -43,7 +43,7 @@ .globl sys_vfork ENTRY(buserr) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ @@ -52,7 +52,7 @@ ENTRY(buserr) jra ret_from_exception ENTRY(trap) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ @@ -64,7 +64,7 @@ ENTRY(trap) .globl dbginterrupt ENTRY(dbginterrupt) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 16b2de7f5101..2ed8c0fb1517 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -36,6 +36,7 @@ #include <asm/irq.h> #include <asm/machdep.h> #include <asm/pgtable.h> +#include <asm/sections.h> unsigned long memory_start; unsigned long memory_end; @@ -80,9 +81,6 @@ void (*mach_power_off)(void); #define CPU_INSTR_PER_JIFFY 16 #endif -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; -extern int _ramstart, _ramend; - #if defined(CONFIG_UBOOT) /* * parse_uboot_commandline diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 00d1452f9571..c468f2edaa85 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -189,7 +189,7 @@ ENTRY(sys_call_table) .long sys_getpagesize .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index c98add3f5f0f..89362f2bb56a 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -1,5 +1,1107 @@ -#ifdef CONFIG_MMU -#include "traps_mm.c" +/* + * linux/arch/m68k/kernel/traps.c + * + * Copyright (C) 1993, 1994 by Hamish Macdonald + * + * 68040 fixes by Michael Rausch + * 68040 fixes by Martin Apel + * 68040 fixes and writeback by Richard Zidlicky + * 68060 fixes by Roman Hodek + * 68060 fixes by Jesper Skov + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/* + * Sets up all exception vectors + */ + +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/user.h> +#include <linux/string.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/kallsyms.h> + +#include <asm/setup.h> +#include <asm/fpu.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/traps.h> +#include <asm/pgalloc.h> +#include <asm/machdep.h> +#include <asm/siginfo.h> + + +static const char *vec_names[] = { + [VEC_RESETSP] = "RESET SP", + [VEC_RESETPC] = "RESET PC", + [VEC_BUSERR] = "BUS ERROR", + [VEC_ADDRERR] = "ADDRESS ERROR", + [VEC_ILLEGAL] = "ILLEGAL INSTRUCTION", + [VEC_ZERODIV] = "ZERO DIVIDE", + [VEC_CHK] = "CHK", + [VEC_TRAP] = "TRAPcc", + [VEC_PRIV] = "PRIVILEGE VIOLATION", + [VEC_TRACE] = "TRACE", + [VEC_LINE10] = "LINE 1010", + [VEC_LINE11] = "LINE 1111", + [VEC_RESV12] = "UNASSIGNED RESERVED 12", + [VEC_COPROC] = "COPROCESSOR PROTOCOL VIOLATION", + [VEC_FORMAT] = "FORMAT ERROR", + [VEC_UNINT] = "UNINITIALIZED INTERRUPT", + [VEC_RESV16] = "UNASSIGNED RESERVED 16", + [VEC_RESV17] = "UNASSIGNED RESERVED 17", + [VEC_RESV18] = "UNASSIGNED RESERVED 18", + [VEC_RESV19] = "UNASSIGNED RESERVED 19", + [VEC_RESV20] = "UNASSIGNED RESERVED 20", + [VEC_RESV21] = "UNASSIGNED RESERVED 21", + [VEC_RESV22] = "UNASSIGNED RESERVED 22", + [VEC_RESV23] = "UNASSIGNED RESERVED 23", + [VEC_SPUR] = "SPURIOUS INTERRUPT", + [VEC_INT1] = "LEVEL 1 INT", + [VEC_INT2] = "LEVEL 2 INT", + [VEC_INT3] = "LEVEL 3 INT", + [VEC_INT4] = "LEVEL 4 INT", + [VEC_INT5] = "LEVEL 5 INT", + [VEC_INT6] = "LEVEL 6 INT", + [VEC_INT7] = "LEVEL 7 INT", + [VEC_SYS] = "SYSCALL", + [VEC_TRAP1] = "TRAP #1", + [VEC_TRAP2] = "TRAP #2", + [VEC_TRAP3] = "TRAP #3", + [VEC_TRAP4] = "TRAP #4", + [VEC_TRAP5] = "TRAP #5", + [VEC_TRAP6] = "TRAP #6", + [VEC_TRAP7] = "TRAP #7", + [VEC_TRAP8] = "TRAP #8", + [VEC_TRAP9] = "TRAP #9", + [VEC_TRAP10] = "TRAP #10", + [VEC_TRAP11] = "TRAP #11", + [VEC_TRAP12] = "TRAP #12", + [VEC_TRAP13] = "TRAP #13", + [VEC_TRAP14] = "TRAP #14", + [VEC_TRAP15] = "TRAP #15", + [VEC_FPBRUC] = "FPCP BSUN", + [VEC_FPIR] = "FPCP INEXACT", + [VEC_FPDIVZ] = "FPCP DIV BY 0", + [VEC_FPUNDER] = "FPCP UNDERFLOW", + [VEC_FPOE] = "FPCP OPERAND ERROR", + [VEC_FPOVER] = "FPCP OVERFLOW", + [VEC_FPNAN] = "FPCP SNAN", + [VEC_FPUNSUP] = "FPCP UNSUPPORTED OPERATION", + [VEC_MMUCFG] = "MMU CONFIGURATION ERROR", + [VEC_MMUILL] = "MMU ILLEGAL OPERATION ERROR", + [VEC_MMUACC] = "MMU ACCESS LEVEL VIOLATION ERROR", + [VEC_RESV59] = "UNASSIGNED RESERVED 59", + [VEC_UNIMPEA] = "UNASSIGNED RESERVED 60", + [VEC_UNIMPII] = "UNASSIGNED RESERVED 61", + [VEC_RESV62] = "UNASSIGNED RESERVED 62", + [VEC_RESV63] = "UNASSIGNED RESERVED 63", +}; + +static const char *space_names[] = { + [0] = "Space 0", + [USER_DATA] = "User Data", + [USER_PROGRAM] = "User Program", +#ifndef CONFIG_SUN3 + [3] = "Space 3", #else -#include "traps_no.c" + [FC_CONTROL] = "Control", +#endif + [4] = "Space 4", + [SUPER_DATA] = "Super Data", + [SUPER_PROGRAM] = "Super Program", + [CPU_SPACE] = "CPU" +}; + +void die_if_kernel(char *,struct pt_regs *,int); +asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code); +int send_fault_sig(struct pt_regs *regs); + +asmlinkage void trap_c(struct frame *fp); + +#if defined (CONFIG_M68060) +static inline void access_error060 (struct frame *fp) +{ + unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */ + +#ifdef DEBUG + printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr); +#endif + + if (fslw & MMU060_BPE) { + /* branch prediction error -> clear branch cache */ + __asm__ __volatile__ ("movec %/cacr,%/d0\n\t" + "orl #0x00400000,%/d0\n\t" + "movec %/d0,%/cacr" + : : : "d0" ); + /* return if there's no other error */ + if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE)) + return; + } + + if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) { + unsigned long errorcode; + unsigned long addr = fp->un.fmt4.effaddr; + + if (fslw & MMU060_MA) + addr = (addr + PAGE_SIZE - 1) & PAGE_MASK; + + errorcode = 1; + if (fslw & MMU060_DESC_ERR) { + __flush_tlb040_one(addr); + errorcode = 0; + } + if (fslw & MMU060_W) + errorcode |= 2; +#ifdef DEBUG + printk("errorcode = %d\n", errorcode ); +#endif + do_page_fault(&fp->ptregs, addr, errorcode); + } else if (fslw & (MMU060_SEE)){ + /* Software Emulation Error. + * fault during mem_read/mem_write in ifpsp060/os.S + */ + send_fault_sig(&fp->ptregs); + } else if (!(fslw & (MMU060_RE|MMU060_WE)) || + send_fault_sig(&fp->ptregs) > 0) { + printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr); + printk( "68060 access error, fslw=%lx\n", fslw ); + trap_c( fp ); + } +} +#endif /* CONFIG_M68060 */ + +#if defined (CONFIG_M68040) +static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) +{ + unsigned long mmusr; + mm_segment_t old_fs = get_fs(); + + set_fs(MAKE_MM_SEG(wbs)); + + if (iswrite) + asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr)); + else + asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr)); + + asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr)); + + set_fs(old_fs); + + return mmusr; +} + +static inline int do_040writeback1(unsigned short wbs, unsigned long wba, + unsigned long wbd) +{ + int res = 0; + mm_segment_t old_fs = get_fs(); + + /* set_fs can not be moved, otherwise put_user() may oops */ + set_fs(MAKE_MM_SEG(wbs)); + + switch (wbs & WBSIZ_040) { + case BA_SIZE_BYTE: + res = put_user(wbd & 0xff, (char __user *)wba); + break; + case BA_SIZE_WORD: + res = put_user(wbd & 0xffff, (short __user *)wba); + break; + case BA_SIZE_LONG: + res = put_user(wbd, (int __user *)wba); + break; + } + + /* set_fs can not be moved, otherwise put_user() may oops */ + set_fs(old_fs); + + +#ifdef DEBUG + printk("do_040writeback1, res=%d\n",res); +#endif + + return res; +} + +/* after an exception in a writeback the stack frame corresponding + * to that exception is discarded, set a few bits in the old frame + * to simulate what it should look like + */ +static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs) +{ + fp->un.fmt7.faddr = wba; + fp->un.fmt7.ssw = wbs & 0xff; + if (wba != current->thread.faddr) + fp->un.fmt7.ssw |= MA_040; +} + +static inline void do_040writebacks(struct frame *fp) +{ + int res = 0; +#if 0 + if (fp->un.fmt7.wb1s & WBV_040) + printk("access_error040: cannot handle 1st writeback. oops.\n"); +#endif + + if ((fp->un.fmt7.wb2s & WBV_040) && + !(fp->un.fmt7.wb2s & WBTT_040)) { + res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, + fp->un.fmt7.wb2d); + if (res) + fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s); + else + fp->un.fmt7.wb2s = 0; + } + + /* do the 2nd wb only if the first one was successful (except for a kernel wb) */ + if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) { + res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, + fp->un.fmt7.wb3d); + if (res) + { + fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s); + + fp->un.fmt7.wb2s = fp->un.fmt7.wb3s; + fp->un.fmt7.wb3s &= (~WBV_040); + fp->un.fmt7.wb2a = fp->un.fmt7.wb3a; + fp->un.fmt7.wb2d = fp->un.fmt7.wb3d; + } + else + fp->un.fmt7.wb3s = 0; + } + + if (res) + send_fault_sig(&fp->ptregs); +} + +/* + * called from sigreturn(), must ensure userspace code didn't + * manipulate exception frame to circumvent protection, then complete + * pending writebacks + * we just clear TM2 to turn it into a userspace access + */ +asmlinkage void berr_040cleanup(struct frame *fp) +{ + fp->un.fmt7.wb2s &= ~4; + fp->un.fmt7.wb3s &= ~4; + + do_040writebacks(fp); +} + +static inline void access_error040(struct frame *fp) +{ + unsigned short ssw = fp->un.fmt7.ssw; + unsigned long mmusr; + +#ifdef DEBUG + printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr); + printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s, + fp->un.fmt7.wb2s, fp->un.fmt7.wb3s); + printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n", + fp->un.fmt7.wb2a, fp->un.fmt7.wb3a, + fp->un.fmt7.wb2d, fp->un.fmt7.wb3d); +#endif + + if (ssw & ATC_040) { + unsigned long addr = fp->un.fmt7.faddr; + unsigned long errorcode; + + /* + * The MMU status has to be determined AFTER the address + * has been corrected if there was a misaligned access (MA). + */ + if (ssw & MA_040) + addr = (addr + 7) & -8; + + /* MMU error, get the MMUSR info for this access */ + mmusr = probe040(!(ssw & RW_040), addr, ssw); +#ifdef DEBUG + printk("mmusr = %lx\n", mmusr); +#endif + errorcode = 1; + if (!(mmusr & MMU_R_040)) { + /* clear the invalid atc entry */ + __flush_tlb040_one(addr); + errorcode = 0; + } + + /* despite what documentation seems to say, RMW + * accesses have always both the LK and RW bits set */ + if (!(ssw & RW_040) || (ssw & LK_040)) + errorcode |= 2; + + if (do_page_fault(&fp->ptregs, addr, errorcode)) { +#ifdef DEBUG + printk("do_page_fault() !=0\n"); +#endif + if (user_mode(&fp->ptregs)){ + /* delay writebacks after signal delivery */ +#ifdef DEBUG + printk(".. was usermode - return\n"); +#endif + return; + } + /* disable writeback into user space from kernel + * (if do_page_fault didn't fix the mapping, + * the writeback won't do good) + */ +disable_wb: +#ifdef DEBUG + printk(".. disabling wb2\n"); +#endif + if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr) + fp->un.fmt7.wb2s &= ~WBV_040; + if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr) + fp->un.fmt7.wb3s &= ~WBV_040; + } + } else { + /* In case of a bus error we either kill the process or expect + * the kernel to catch the fault, which then is also responsible + * for cleaning up the mess. + */ + current->thread.signo = SIGBUS; + current->thread.faddr = fp->un.fmt7.faddr; + if (send_fault_sig(&fp->ptregs) >= 0) + printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw, + fp->un.fmt7.faddr); + goto disable_wb; + } + + do_040writebacks(fp); +} +#endif /* CONFIG_M68040 */ + +#if defined(CONFIG_SUN3) +#include <asm/sun3mmu.h> + +extern int mmu_emu_handle_fault (unsigned long, int, int); + +/* sun3 version of bus_error030 */ + +static inline void bus_error030 (struct frame *fp) +{ + unsigned char buserr_type = sun3_get_buserr (); + unsigned long addr, errorcode; + unsigned short ssw = fp->un.fmtb.ssw; + extern unsigned long _sun3_map_test_start, _sun3_map_test_end; + +#ifdef DEBUG + if (ssw & (FC | FB)) + printk ("Instruction fault at %#010lx\n", + ssw & FC ? + fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 + : + fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); + if (ssw & DF) + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); +#endif + + /* + * Check if this page should be demand-mapped. This needs to go before + * the testing for a bad kernel-space access (demand-mapping applies + * to kernel accesses too). + */ + + if ((ssw & DF) + && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) { + if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0)) + return; + } + + /* Check for kernel-space pagefault (BAD). */ + if (fp->ptregs.sr & PS_S) { + /* kernel fault must be a data fault to user space */ + if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) { + // try checking the kernel mappings before surrender + if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1)) + return; + /* instruction fault or kernel data fault! */ + if (ssw & (FC | FB)) + printk ("Instruction fault at %#010lx\n", + fp->ptregs.pc); + if (ssw & DF) { + /* was this fault incurred testing bus mappings? */ + if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) && + (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) { + send_fault_sig(&fp->ptregs); + return; + } + + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); + } + printk ("BAD KERNEL BUSERR\n"); + + die_if_kernel("Oops", &fp->ptregs,0); + force_sig(SIGKILL, current); + return; + } + } else { + /* user fault */ + if (!(ssw & (FC | FB)) && !(ssw & DF)) + /* not an instruction fault or data fault! BAD */ + panic ("USER BUSERR w/o instruction or data fault"); + } + + + /* First handle the data fault, if any. */ + if (ssw & DF) { + addr = fp->un.fmtb.daddr; + +// errorcode bit 0: 0 -> no page 1 -> protection fault +// errorcode bit 1: 0 -> read fault 1 -> write fault + +// (buserr_type & SUN3_BUSERR_PROTERR) -> protection fault +// (buserr_type & SUN3_BUSERR_INVALID) -> invalid page fault + + if (buserr_type & SUN3_BUSERR_PROTERR) + errorcode = 0x01; + else if (buserr_type & SUN3_BUSERR_INVALID) + errorcode = 0x00; + else { +#ifdef DEBUG + printk ("*** unexpected busfault type=%#04x\n", buserr_type); + printk ("invalid %s access at %#lx from pc %#lx\n", + !(ssw & RW) ? "write" : "read", addr, + fp->ptregs.pc); +#endif + die_if_kernel ("Oops", &fp->ptregs, buserr_type); + force_sig (SIGBUS, current); + return; + } + +//todo: wtf is RM bit? --m + if (!(ssw & RW) || ssw & RM) + errorcode |= 0x02; + + /* Handle page fault. */ + do_page_fault (&fp->ptregs, addr, errorcode); + + /* Retry the data fault now. */ + return; + } + + /* Now handle the instruction fault. */ + + /* Get the fault address. */ + if (fp->ptregs.format == 0xA) + addr = fp->ptregs.pc + 4; + else + addr = fp->un.fmtb.baddr; + if (ssw & FC) + addr -= 2; + + if (buserr_type & SUN3_BUSERR_INVALID) { + if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0)) + do_page_fault (&fp->ptregs, addr, 0); + } else { +#ifdef DEBUG + printk ("protection fault on insn access (segv).\n"); +#endif + force_sig (SIGSEGV, current); + } +} +#else +#if defined(CPU_M68020_OR_M68030) +static inline void bus_error030 (struct frame *fp) +{ + volatile unsigned short temp; + unsigned short mmusr; + unsigned long addr, errorcode; + unsigned short ssw = fp->un.fmtb.ssw; +#ifdef DEBUG + unsigned long desc; + + printk ("pid = %x ", current->pid); + printk ("SSW=%#06x ", ssw); + + if (ssw & (FC | FB)) + printk ("Instruction fault at %#010lx\n", + ssw & FC ? + fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 + : + fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); + if (ssw & DF) + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); +#endif + + /* ++andreas: If a data fault and an instruction fault happen + at the same time map in both pages. */ + + /* First handle the data fault, if any. */ + if (ssw & DF) { + addr = fp->un.fmtb.daddr; + +#ifdef DEBUG + asm volatile ("ptestr %3,%2@,#7,%0\n\t" + "pmove %%psr,%1@" + : "=a&" (desc) + : "a" (&temp), "a" (addr), "d" (ssw)); +#else + asm volatile ("ptestr %2,%1@,#7\n\t" + "pmove %%psr,%0@" + : : "a" (&temp), "a" (addr), "d" (ssw)); +#endif + mmusr = temp; + +#ifdef DEBUG + printk("mmusr is %#x for addr %#lx in task %p\n", + mmusr, addr, current); + printk("descriptor address is %#lx, contents %#lx\n", + __va(desc), *(unsigned long *)__va(desc)); +#endif + + errorcode = (mmusr & MMU_I) ? 0 : 1; + if (!(ssw & RW) || (ssw & RM)) + errorcode |= 2; + + if (mmusr & (MMU_I | MMU_WP)) { + if (ssw & 4) { + printk("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); + goto buserr; + } + /* Don't try to do anything further if an exception was + handled. */ + if (do_page_fault (&fp->ptregs, addr, errorcode) < 0) + return; + } else if (!(mmusr & MMU_I)) { + /* probably a 020 cas fault */ + if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0) + printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr); + } else if (mmusr & (MMU_B|MMU_L|MMU_S)) { + printk("invalid %s access at %#lx from pc %#lx\n", + !(ssw & RW) ? "write" : "read", addr, + fp->ptregs.pc); + die_if_kernel("Oops",&fp->ptregs,mmusr); + force_sig(SIGSEGV, current); + return; + } else { +#if 0 + static volatile long tlong; +#endif + + printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n", + !(ssw & RW) ? "write" : "read", addr, + fp->ptregs.pc, ssw); + asm volatile ("ptestr #1,%1@,#0\n\t" + "pmove %%psr,%0@" + : /* no outputs */ + : "a" (&temp), "a" (addr)); + mmusr = temp; + + printk ("level 0 mmusr is %#x\n", mmusr); +#if 0 + asm volatile ("pmove %%tt0,%0@" + : /* no outputs */ + : "a" (&tlong)); + printk("tt0 is %#lx, ", tlong); + asm volatile ("pmove %%tt1,%0@" + : /* no outputs */ + : "a" (&tlong)); + printk("tt1 is %#lx\n", tlong); +#endif +#ifdef DEBUG + printk("Unknown SIGSEGV - 1\n"); +#endif + die_if_kernel("Oops",&fp->ptregs,mmusr); + force_sig(SIGSEGV, current); + return; + } + + /* setup an ATC entry for the access about to be retried */ + if (!(ssw & RW) || (ssw & RM)) + asm volatile ("ploadw %1,%0@" : /* no outputs */ + : "a" (addr), "d" (ssw)); + else + asm volatile ("ploadr %1,%0@" : /* no outputs */ + : "a" (addr), "d" (ssw)); + } + + /* Now handle the instruction fault. */ + + if (!(ssw & (FC|FB))) + return; + + if (fp->ptregs.sr & PS_S) { + printk("Instruction fault at %#010lx\n", + fp->ptregs.pc); + buserr: + printk ("BAD KERNEL BUSERR\n"); + die_if_kernel("Oops",&fp->ptregs,0); + force_sig(SIGKILL, current); + return; + } + + /* get the fault address */ + if (fp->ptregs.format == 10) + addr = fp->ptregs.pc + 4; + else + addr = fp->un.fmtb.baddr; + if (ssw & FC) + addr -= 2; + + if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0) + /* Insn fault on same page as data fault. But we + should still create the ATC entry. */ + goto create_atc_entry; + +#ifdef DEBUG + asm volatile ("ptestr #1,%2@,#7,%0\n\t" + "pmove %%psr,%1@" + : "=a&" (desc) + : "a" (&temp), "a" (addr)); +#else + asm volatile ("ptestr #1,%1@,#7\n\t" + "pmove %%psr,%0@" + : : "a" (&temp), "a" (addr)); +#endif + mmusr = temp; + +#ifdef DEBUG + printk ("mmusr is %#x for addr %#lx in task %p\n", + mmusr, addr, current); + printk ("descriptor address is %#lx, contents %#lx\n", + __va(desc), *(unsigned long *)__va(desc)); +#endif + + if (mmusr & MMU_I) + do_page_fault (&fp->ptregs, addr, 0); + else if (mmusr & (MMU_B|MMU_L|MMU_S)) { + printk ("invalid insn access at %#lx from pc %#lx\n", + addr, fp->ptregs.pc); +#ifdef DEBUG + printk("Unknown SIGSEGV - 2\n"); +#endif + die_if_kernel("Oops",&fp->ptregs,mmusr); + force_sig(SIGSEGV, current); + return; + } + +create_atc_entry: + /* setup an ATC entry for the access about to be retried */ + asm volatile ("ploadr #2,%0@" : /* no outputs */ + : "a" (addr)); +} +#endif /* CPU_M68020_OR_M68030 */ +#endif /* !CONFIG_SUN3 */ + +asmlinkage void buserr_c(struct frame *fp) +{ + /* Only set esp0 if coming from user mode */ + if (user_mode(&fp->ptregs)) + current->thread.esp0 = (unsigned long) fp; + +#ifdef DEBUG + printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format); +#endif + + switch (fp->ptregs.format) { +#if defined (CONFIG_M68060) + case 4: /* 68060 access error */ + access_error060 (fp); + break; +#endif +#if defined (CONFIG_M68040) + case 0x7: /* 68040 access error */ + access_error040 (fp); + break; +#endif +#if defined (CPU_M68020_OR_M68030) + case 0xa: + case 0xb: + bus_error030 (fp); + break; +#endif + default: + die_if_kernel("bad frame format",&fp->ptregs,0); +#ifdef DEBUG + printk("Unknown SIGSEGV - 4\n"); +#endif + force_sig(SIGSEGV, current); + } +} + + +static int kstack_depth_to_print = 48; + +void show_trace(unsigned long *stack) +{ + unsigned long *endstack; + unsigned long addr; + int i; + + printk("Call Trace:"); + addr = (unsigned long)stack + THREAD_SIZE - 1; + endstack = (unsigned long *)(addr & -THREAD_SIZE); + i = 0; + while (stack + 1 <= endstack) { + addr = *stack++; + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (__kernel_text_address(addr)) { +#ifndef CONFIG_KALLSYMS + if (i % 5 == 0) + printk("\n "); +#endif + printk(" [<%08lx>] %pS\n", addr, (void *)addr); + i++; + } + } + printk("\n"); +} + +void show_registers(struct pt_regs *regs) +{ + struct frame *fp = (struct frame *)regs; + mm_segment_t old_fs = get_fs(); + u16 c, *cp; + unsigned long addr; + int i; + + print_modules(); + printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc); + printk("SR: %04x SP: %p a2: %08lx\n", regs->sr, regs, regs->a2); + printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", + regs->d0, regs->d1, regs->d2, regs->d3); + printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", + regs->d4, regs->d5, regs->a0, regs->a1); + + printk("Process %s (pid: %d, task=%p)\n", + current->comm, task_pid_nr(current), current); + addr = (unsigned long)&fp->un; + printk("Frame format=%X ", regs->format); + switch (regs->format) { + case 0x2: + printk("instr addr=%08lx\n", fp->un.fmt2.iaddr); + addr += sizeof(fp->un.fmt2); + break; + case 0x3: + printk("eff addr=%08lx\n", fp->un.fmt3.effaddr); + addr += sizeof(fp->un.fmt3); + break; + case 0x4: + printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n" + : "eff addr=%08lx pc=%08lx\n"), + fp->un.fmt4.effaddr, fp->un.fmt4.pc); + addr += sizeof(fp->un.fmt4); + break; + case 0x7: + printk("eff addr=%08lx ssw=%04x faddr=%08lx\n", + fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr); + printk("wb 1 stat/addr/data: %04x %08lx %08lx\n", + fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0); + printk("wb 2 stat/addr/data: %04x %08lx %08lx\n", + fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d); + printk("wb 3 stat/addr/data: %04x %08lx %08lx\n", + fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d); + printk("push data: %08lx %08lx %08lx %08lx\n", + fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2, + fp->un.fmt7.pd3); + addr += sizeof(fp->un.fmt7); + break; + case 0x9: + printk("instr addr=%08lx\n", fp->un.fmt9.iaddr); + addr += sizeof(fp->un.fmt9); + break; + case 0xa: + printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", + fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb, + fp->un.fmta.daddr, fp->un.fmta.dobuf); + addr += sizeof(fp->un.fmta); + break; + case 0xb: + printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", + fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb, + fp->un.fmtb.daddr, fp->un.fmtb.dobuf); + printk("baddr=%08lx dibuf=%08lx ver=%x\n", + fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver); + addr += sizeof(fp->un.fmtb); + break; + default: + printk("\n"); + } + show_stack(NULL, (unsigned long *)addr); + + printk("Code:"); + set_fs(KERNEL_DS); + cp = (u16 *)regs->pc; + for (i = -8; i < 16; i++) { + if (get_user(c, cp + i) && i >= 0) { + printk(" Bad PC value."); + break; + } + printk(i ? " %04x" : " <%04x>", c); + } + set_fs(old_fs); + printk ("\n"); +} + +void show_stack(struct task_struct *task, unsigned long *stack) +{ + unsigned long *p; + unsigned long *endstack; + int i; + + if (!stack) { + if (task) + stack = (unsigned long *)task->thread.esp0; + else + stack = (unsigned long *)&stack; + } + endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE); + + printk("Stack from %08lx:", (unsigned long)stack); + p = stack; + for (i = 0; i < kstack_depth_to_print; i++) { + if (p + 1 > endstack) + break; + if (i % 8 == 0) + printk("\n "); + printk(" %08lx", *p++); + } + printk("\n"); + show_trace(stack); +} + +/* + * The architecture-independent backtrace generator + */ +void dump_stack(void) +{ + unsigned long stack; + + show_trace(&stack); +} + +EXPORT_SYMBOL(dump_stack); + +/* + * The vector number returned in the frame pointer may also contain + * the "fs" (Fault Status) bits on ColdFire. These are in the bottom + * 2 bits, and upper 2 bits. So we need to mask out the real vector + * number before using it in comparisons. You don't need to do this on + * real 68k parts, but it won't hurt either. + */ + +void bad_super_trap (struct frame *fp) +{ + int vector = (fp->ptregs.vector >> 2) & 0xff; + + console_verbose(); + if (vector < ARRAY_SIZE(vec_names)) + printk ("*** %s *** FORMAT=%X\n", + vec_names[vector], + fp->ptregs.format); + else + printk ("*** Exception %d *** FORMAT=%X\n", + vector, fp->ptregs.format); + if (vector == VEC_ADDRERR && CPU_IS_020_OR_030) { + unsigned short ssw = fp->un.fmtb.ssw; + + printk ("SSW=%#06x ", ssw); + + if (ssw & RC) + printk ("Pipe stage C instruction fault at %#010lx\n", + (fp->ptregs.format) == 0xA ? + fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2); + if (ssw & RB) + printk ("Pipe stage B instruction fault at %#010lx\n", + (fp->ptregs.format) == 0xA ? + fp->ptregs.pc + 4 : fp->un.fmtb.baddr); + if (ssw & DF) + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, space_names[ssw & DFC], + fp->ptregs.pc); + } + printk ("Current process id is %d\n", task_pid_nr(current)); + die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); +} + +asmlinkage void trap_c(struct frame *fp) +{ + int sig; + int vector = (fp->ptregs.vector >> 2) & 0xff; + siginfo_t info; + + if (fp->ptregs.sr & PS_S) { + if (vector == VEC_TRACE) { + /* traced a trapping instruction on a 68020/30, + * real exception will be executed afterwards. + */ + } else if (!handle_kernel_fault(&fp->ptregs)) + bad_super_trap(fp); + return; + } + + /* send the appropriate signal to the user program */ + switch (vector) { + case VEC_ADDRERR: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + break; + case VEC_ILLEGAL: + case VEC_LINE10: + case VEC_LINE11: + info.si_code = ILL_ILLOPC; + sig = SIGILL; + break; + case VEC_PRIV: + info.si_code = ILL_PRVOPC; + sig = SIGILL; + break; + case VEC_COPROC: + info.si_code = ILL_COPROC; + sig = SIGILL; + break; + case VEC_TRAP1: + case VEC_TRAP2: + case VEC_TRAP3: + case VEC_TRAP4: + case VEC_TRAP5: + case VEC_TRAP6: + case VEC_TRAP7: + case VEC_TRAP8: + case VEC_TRAP9: + case VEC_TRAP10: + case VEC_TRAP11: + case VEC_TRAP12: + case VEC_TRAP13: + case VEC_TRAP14: + info.si_code = ILL_ILLTRP; + sig = SIGILL; + break; + case VEC_FPBRUC: + case VEC_FPOE: + case VEC_FPNAN: + info.si_code = FPE_FLTINV; + sig = SIGFPE; + break; + case VEC_FPIR: + info.si_code = FPE_FLTRES; + sig = SIGFPE; + break; + case VEC_FPDIVZ: + info.si_code = FPE_FLTDIV; + sig = SIGFPE; + break; + case VEC_FPUNDER: + info.si_code = FPE_FLTUND; + sig = SIGFPE; + break; + case VEC_FPOVER: + info.si_code = FPE_FLTOVF; + sig = SIGFPE; + break; + case VEC_ZERODIV: + info.si_code = FPE_INTDIV; + sig = SIGFPE; + break; + case VEC_CHK: + case VEC_TRAP: + info.si_code = FPE_INTOVF; + sig = SIGFPE; + break; + case VEC_TRACE: /* ptrace single step */ + info.si_code = TRAP_TRACE; + sig = SIGTRAP; + break; + case VEC_TRAP15: /* breakpoint */ + info.si_code = TRAP_BRKPT; + sig = SIGTRAP; + break; + default: + info.si_code = ILL_ILLOPC; + sig = SIGILL; + break; + } + info.si_signo = sig; + info.si_errno = 0; + switch (fp->ptregs.format) { + default: + info.si_addr = (void *) fp->ptregs.pc; + break; + case 2: + info.si_addr = (void *) fp->un.fmt2.iaddr; + break; + case 7: + info.si_addr = (void *) fp->un.fmt7.effaddr; + break; + case 9: + info.si_addr = (void *) fp->un.fmt9.iaddr; + break; + case 10: + info.si_addr = (void *) fp->un.fmta.daddr; + break; + case 11: + info.si_addr = (void *) fp->un.fmtb.daddr; + break; + } + force_sig_info (sig, &info, current); +} + +void die_if_kernel (char *str, struct pt_regs *fp, int nr) +{ + if (!(fp->sr & PS_S)) + return; + + console_verbose(); + printk("%s: %08x\n",str,nr); + show_registers(fp); + add_taint(TAINT_DIE); + do_exit(SIGSEGV); +} + +asmlinkage void set_esp0(unsigned long ssp) +{ + current->thread.esp0 = ssp; +} + +/* + * This function is called if an error occur while accessing + * user-space from the fpsp040 code. + */ +asmlinkage void fpsp040_die(void) +{ + do_exit(SIGSEGV); +} + +#ifdef CONFIG_M68KFPU_EMU +asmlinkage void fpemu_signal(int signal, int code, void *addr) +{ + siginfo_t info; + + info.si_signo = signal; + info.si_errno = 0; + info.si_code = code; + info.si_addr = addr; + force_sig_info(signal, &info, current); +} #endif diff --git a/arch/m68k/kernel/traps_mm.c b/arch/m68k/kernel/traps_mm.c deleted file mode 100644 index 4022bbc28878..000000000000 --- a/arch/m68k/kernel/traps_mm.c +++ /dev/null @@ -1,1207 +0,0 @@ -/* - * linux/arch/m68k/kernel/traps.c - * - * Copyright (C) 1993, 1994 by Hamish Macdonald - * - * 68040 fixes by Michael Rausch - * 68040 fixes by Martin Apel - * 68040 fixes and writeback by Richard Zidlicky - * 68060 fixes by Roman Hodek - * 68060 fixes by Jesper Skov - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * Sets up all exception vectors - */ - -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/user.h> -#include <linux/string.h> -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/kallsyms.h> - -#include <asm/setup.h> -#include <asm/fpu.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/traps.h> -#include <asm/pgalloc.h> -#include <asm/machdep.h> -#include <asm/siginfo.h> - -/* assembler routines */ -asmlinkage void system_call(void); -asmlinkage void buserr(void); -asmlinkage void trap(void); -asmlinkage void nmihandler(void); -#ifdef CONFIG_M68KFPU_EMU -asmlinkage void fpu_emu(void); -#endif - -e_vector vectors[256]; - -/* nmi handler for the Amiga */ -asm(".text\n" - __ALIGN_STR "\n" - "nmihandler: rte"); - -/* - * this must be called very early as the kernel might - * use some instruction that are emulated on the 060 - * and so we're prepared for early probe attempts (e.g. nf_init). - */ -void __init base_trap_init(void) -{ - if (MACH_IS_SUN3X) { - extern e_vector *sun3x_prom_vbr; - - __asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr)); - } - - /* setup the exception vector table */ - __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors)); - - if (CPU_IS_060) { - /* set up ISP entry points */ - asmlinkage void unimp_vec(void) asm ("_060_isp_unimp"); - - vectors[VEC_UNIMPII] = unimp_vec; - } - - vectors[VEC_BUSERR] = buserr; - vectors[VEC_ILLEGAL] = trap; - vectors[VEC_SYS] = system_call; -} - -void __init trap_init (void) -{ - int i; - - for (i = VEC_SPUR; i <= VEC_INT7; i++) - vectors[i] = bad_inthandler; - - for (i = 0; i < VEC_USER; i++) - if (!vectors[i]) - vectors[i] = trap; - - for (i = VEC_USER; i < 256; i++) - vectors[i] = bad_inthandler; - -#ifdef CONFIG_M68KFPU_EMU - if (FPU_IS_EMU) - vectors[VEC_LINE11] = fpu_emu; -#endif - - if (CPU_IS_040 && !FPU_IS_EMU) { - /* set up FPSP entry points */ - asmlinkage void dz_vec(void) asm ("dz"); - asmlinkage void inex_vec(void) asm ("inex"); - asmlinkage void ovfl_vec(void) asm ("ovfl"); - asmlinkage void unfl_vec(void) asm ("unfl"); - asmlinkage void snan_vec(void) asm ("snan"); - asmlinkage void operr_vec(void) asm ("operr"); - asmlinkage void bsun_vec(void) asm ("bsun"); - asmlinkage void fline_vec(void) asm ("fline"); - asmlinkage void unsupp_vec(void) asm ("unsupp"); - - vectors[VEC_FPDIVZ] = dz_vec; - vectors[VEC_FPIR] = inex_vec; - vectors[VEC_FPOVER] = ovfl_vec; - vectors[VEC_FPUNDER] = unfl_vec; - vectors[VEC_FPNAN] = snan_vec; - vectors[VEC_FPOE] = operr_vec; - vectors[VEC_FPBRUC] = bsun_vec; - vectors[VEC_LINE11] = fline_vec; - vectors[VEC_FPUNSUP] = unsupp_vec; - } - - if (CPU_IS_060 && !FPU_IS_EMU) { - /* set up IFPSP entry points */ - asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan"); - asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr"); - asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl"); - asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl"); - asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz"); - asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex"); - asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline"); - asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp"); - asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd"); - - vectors[VEC_FPNAN] = snan_vec6; - vectors[VEC_FPOE] = operr_vec6; - vectors[VEC_FPOVER] = ovfl_vec6; - vectors[VEC_FPUNDER] = unfl_vec6; - vectors[VEC_FPDIVZ] = dz_vec6; - vectors[VEC_FPIR] = inex_vec6; - vectors[VEC_LINE11] = fline_vec6; - vectors[VEC_FPUNSUP] = unsupp_vec6; - vectors[VEC_UNIMPEA] = effadd_vec6; - } - - /* if running on an amiga, make the NMI interrupt do nothing */ - if (MACH_IS_AMIGA) { - vectors[VEC_INT7] = nmihandler; - } -} - - -static const char *vec_names[] = { - [VEC_RESETSP] = "RESET SP", - [VEC_RESETPC] = "RESET PC", - [VEC_BUSERR] = "BUS ERROR", - [VEC_ADDRERR] = "ADDRESS ERROR", - [VEC_ILLEGAL] = "ILLEGAL INSTRUCTION", - [VEC_ZERODIV] = "ZERO DIVIDE", - [VEC_CHK] = "CHK", - [VEC_TRAP] = "TRAPcc", - [VEC_PRIV] = "PRIVILEGE VIOLATION", - [VEC_TRACE] = "TRACE", - [VEC_LINE10] = "LINE 1010", - [VEC_LINE11] = "LINE 1111", - [VEC_RESV12] = "UNASSIGNED RESERVED 12", - [VEC_COPROC] = "COPROCESSOR PROTOCOL VIOLATION", - [VEC_FORMAT] = "FORMAT ERROR", - [VEC_UNINT] = "UNINITIALIZED INTERRUPT", - [VEC_RESV16] = "UNASSIGNED RESERVED 16", - [VEC_RESV17] = "UNASSIGNED RESERVED 17", - [VEC_RESV18] = "UNASSIGNED RESERVED 18", - [VEC_RESV19] = "UNASSIGNED RESERVED 19", - [VEC_RESV20] = "UNASSIGNED RESERVED 20", - [VEC_RESV21] = "UNASSIGNED RESERVED 21", - [VEC_RESV22] = "UNASSIGNED RESERVED 22", - [VEC_RESV23] = "UNASSIGNED RESERVED 23", - [VEC_SPUR] = "SPURIOUS INTERRUPT", - [VEC_INT1] = "LEVEL 1 INT", - [VEC_INT2] = "LEVEL 2 INT", - [VEC_INT3] = "LEVEL 3 INT", - [VEC_INT4] = "LEVEL 4 INT", - [VEC_INT5] = "LEVEL 5 INT", - [VEC_INT6] = "LEVEL 6 INT", - [VEC_INT7] = "LEVEL 7 INT", - [VEC_SYS] = "SYSCALL", - [VEC_TRAP1] = "TRAP #1", - [VEC_TRAP2] = "TRAP #2", - [VEC_TRAP3] = "TRAP #3", - [VEC_TRAP4] = "TRAP #4", - [VEC_TRAP5] = "TRAP #5", - [VEC_TRAP6] = "TRAP #6", - [VEC_TRAP7] = "TRAP #7", - [VEC_TRAP8] = "TRAP #8", - [VEC_TRAP9] = "TRAP #9", - [VEC_TRAP10] = "TRAP #10", - [VEC_TRAP11] = "TRAP #11", - [VEC_TRAP12] = "TRAP #12", - [VEC_TRAP13] = "TRAP #13", - [VEC_TRAP14] = "TRAP #14", - [VEC_TRAP15] = "TRAP #15", - [VEC_FPBRUC] = "FPCP BSUN", - [VEC_FPIR] = "FPCP INEXACT", - [VEC_FPDIVZ] = "FPCP DIV BY 0", - [VEC_FPUNDER] = "FPCP UNDERFLOW", - [VEC_FPOE] = "FPCP OPERAND ERROR", - [VEC_FPOVER] = "FPCP OVERFLOW", - [VEC_FPNAN] = "FPCP SNAN", - [VEC_FPUNSUP] = "FPCP UNSUPPORTED OPERATION", - [VEC_MMUCFG] = "MMU CONFIGURATION ERROR", - [VEC_MMUILL] = "MMU ILLEGAL OPERATION ERROR", - [VEC_MMUACC] = "MMU ACCESS LEVEL VIOLATION ERROR", - [VEC_RESV59] = "UNASSIGNED RESERVED 59", - [VEC_UNIMPEA] = "UNASSIGNED RESERVED 60", - [VEC_UNIMPII] = "UNASSIGNED RESERVED 61", - [VEC_RESV62] = "UNASSIGNED RESERVED 62", - [VEC_RESV63] = "UNASSIGNED RESERVED 63", -}; - -static const char *space_names[] = { - [0] = "Space 0", - [USER_DATA] = "User Data", - [USER_PROGRAM] = "User Program", -#ifndef CONFIG_SUN3 - [3] = "Space 3", -#else - [FC_CONTROL] = "Control", -#endif - [4] = "Space 4", - [SUPER_DATA] = "Super Data", - [SUPER_PROGRAM] = "Super Program", - [CPU_SPACE] = "CPU" -}; - -void die_if_kernel(char *,struct pt_regs *,int); -asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code); -int send_fault_sig(struct pt_regs *regs); - -asmlinkage void trap_c(struct frame *fp); - -#if defined (CONFIG_M68060) -static inline void access_error060 (struct frame *fp) -{ - unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */ - -#ifdef DEBUG - printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr); -#endif - - if (fslw & MMU060_BPE) { - /* branch prediction error -> clear branch cache */ - __asm__ __volatile__ ("movec %/cacr,%/d0\n\t" - "orl #0x00400000,%/d0\n\t" - "movec %/d0,%/cacr" - : : : "d0" ); - /* return if there's no other error */ - if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE)) - return; - } - - if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) { - unsigned long errorcode; - unsigned long addr = fp->un.fmt4.effaddr; - - if (fslw & MMU060_MA) - addr = (addr + PAGE_SIZE - 1) & PAGE_MASK; - - errorcode = 1; - if (fslw & MMU060_DESC_ERR) { - __flush_tlb040_one(addr); - errorcode = 0; - } - if (fslw & MMU060_W) - errorcode |= 2; -#ifdef DEBUG - printk("errorcode = %d\n", errorcode ); -#endif - do_page_fault(&fp->ptregs, addr, errorcode); - } else if (fslw & (MMU060_SEE)){ - /* Software Emulation Error. - * fault during mem_read/mem_write in ifpsp060/os.S - */ - send_fault_sig(&fp->ptregs); - } else if (!(fslw & (MMU060_RE|MMU060_WE)) || - send_fault_sig(&fp->ptregs) > 0) { - printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr); - printk( "68060 access error, fslw=%lx\n", fslw ); - trap_c( fp ); - } -} -#endif /* CONFIG_M68060 */ - -#if defined (CONFIG_M68040) -static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) -{ - unsigned long mmusr; - mm_segment_t old_fs = get_fs(); - - set_fs(MAKE_MM_SEG(wbs)); - - if (iswrite) - asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr)); - else - asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr)); - - asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr)); - - set_fs(old_fs); - - return mmusr; -} - -static inline int do_040writeback1(unsigned short wbs, unsigned long wba, - unsigned long wbd) -{ - int res = 0; - mm_segment_t old_fs = get_fs(); - - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(MAKE_MM_SEG(wbs)); - - switch (wbs & WBSIZ_040) { - case BA_SIZE_BYTE: - res = put_user(wbd & 0xff, (char __user *)wba); - break; - case BA_SIZE_WORD: - res = put_user(wbd & 0xffff, (short __user *)wba); - break; - case BA_SIZE_LONG: - res = put_user(wbd, (int __user *)wba); - break; - } - - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(old_fs); - - -#ifdef DEBUG - printk("do_040writeback1, res=%d\n",res); -#endif - - return res; -} - -/* after an exception in a writeback the stack frame corresponding - * to that exception is discarded, set a few bits in the old frame - * to simulate what it should look like - */ -static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs) -{ - fp->un.fmt7.faddr = wba; - fp->un.fmt7.ssw = wbs & 0xff; - if (wba != current->thread.faddr) - fp->un.fmt7.ssw |= MA_040; -} - -static inline void do_040writebacks(struct frame *fp) -{ - int res = 0; -#if 0 - if (fp->un.fmt7.wb1s & WBV_040) - printk("access_error040: cannot handle 1st writeback. oops.\n"); -#endif - - if ((fp->un.fmt7.wb2s & WBV_040) && - !(fp->un.fmt7.wb2s & WBTT_040)) { - res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, - fp->un.fmt7.wb2d); - if (res) - fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s); - else - fp->un.fmt7.wb2s = 0; - } - - /* do the 2nd wb only if the first one was successful (except for a kernel wb) */ - if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) { - res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, - fp->un.fmt7.wb3d); - if (res) - { - fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s); - - fp->un.fmt7.wb2s = fp->un.fmt7.wb3s; - fp->un.fmt7.wb3s &= (~WBV_040); - fp->un.fmt7.wb2a = fp->un.fmt7.wb3a; - fp->un.fmt7.wb2d = fp->un.fmt7.wb3d; - } - else - fp->un.fmt7.wb3s = 0; - } - - if (res) - send_fault_sig(&fp->ptregs); -} - -/* - * called from sigreturn(), must ensure userspace code didn't - * manipulate exception frame to circumvent protection, then complete - * pending writebacks - * we just clear TM2 to turn it into a userspace access - */ -asmlinkage void berr_040cleanup(struct frame *fp) -{ - fp->un.fmt7.wb2s &= ~4; - fp->un.fmt7.wb3s &= ~4; - - do_040writebacks(fp); -} - -static inline void access_error040(struct frame *fp) -{ - unsigned short ssw = fp->un.fmt7.ssw; - unsigned long mmusr; - -#ifdef DEBUG - printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr); - printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s, - fp->un.fmt7.wb2s, fp->un.fmt7.wb3s); - printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n", - fp->un.fmt7.wb2a, fp->un.fmt7.wb3a, - fp->un.fmt7.wb2d, fp->un.fmt7.wb3d); -#endif - - if (ssw & ATC_040) { - unsigned long addr = fp->un.fmt7.faddr; - unsigned long errorcode; - - /* - * The MMU status has to be determined AFTER the address - * has been corrected if there was a misaligned access (MA). - */ - if (ssw & MA_040) - addr = (addr + 7) & -8; - - /* MMU error, get the MMUSR info for this access */ - mmusr = probe040(!(ssw & RW_040), addr, ssw); -#ifdef DEBUG - printk("mmusr = %lx\n", mmusr); -#endif - errorcode = 1; - if (!(mmusr & MMU_R_040)) { - /* clear the invalid atc entry */ - __flush_tlb040_one(addr); - errorcode = 0; - } - - /* despite what documentation seems to say, RMW - * accesses have always both the LK and RW bits set */ - if (!(ssw & RW_040) || (ssw & LK_040)) - errorcode |= 2; - - if (do_page_fault(&fp->ptregs, addr, errorcode)) { -#ifdef DEBUG - printk("do_page_fault() !=0\n"); -#endif - if (user_mode(&fp->ptregs)){ - /* delay writebacks after signal delivery */ -#ifdef DEBUG - printk(".. was usermode - return\n"); -#endif - return; - } - /* disable writeback into user space from kernel - * (if do_page_fault didn't fix the mapping, - * the writeback won't do good) - */ -disable_wb: -#ifdef DEBUG - printk(".. disabling wb2\n"); -#endif - if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr) - fp->un.fmt7.wb2s &= ~WBV_040; - if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr) - fp->un.fmt7.wb3s &= ~WBV_040; - } - } else { - /* In case of a bus error we either kill the process or expect - * the kernel to catch the fault, which then is also responsible - * for cleaning up the mess. - */ - current->thread.signo = SIGBUS; - current->thread.faddr = fp->un.fmt7.faddr; - if (send_fault_sig(&fp->ptregs) >= 0) - printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw, - fp->un.fmt7.faddr); - goto disable_wb; - } - - do_040writebacks(fp); -} -#endif /* CONFIG_M68040 */ - -#if defined(CONFIG_SUN3) -#include <asm/sun3mmu.h> - -extern int mmu_emu_handle_fault (unsigned long, int, int); - -/* sun3 version of bus_error030 */ - -static inline void bus_error030 (struct frame *fp) -{ - unsigned char buserr_type = sun3_get_buserr (); - unsigned long addr, errorcode; - unsigned short ssw = fp->un.fmtb.ssw; - extern unsigned long _sun3_map_test_start, _sun3_map_test_end; - -#ifdef DEBUG - if (ssw & (FC | FB)) - printk ("Instruction fault at %#010lx\n", - ssw & FC ? - fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 - : - fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); - if (ssw & DF) - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); -#endif - - /* - * Check if this page should be demand-mapped. This needs to go before - * the testing for a bad kernel-space access (demand-mapping applies - * to kernel accesses too). - */ - - if ((ssw & DF) - && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) { - if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0)) - return; - } - - /* Check for kernel-space pagefault (BAD). */ - if (fp->ptregs.sr & PS_S) { - /* kernel fault must be a data fault to user space */ - if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) { - // try checking the kernel mappings before surrender - if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1)) - return; - /* instruction fault or kernel data fault! */ - if (ssw & (FC | FB)) - printk ("Instruction fault at %#010lx\n", - fp->ptregs.pc); - if (ssw & DF) { - /* was this fault incurred testing bus mappings? */ - if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) && - (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) { - send_fault_sig(&fp->ptregs); - return; - } - - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); - } - printk ("BAD KERNEL BUSERR\n"); - - die_if_kernel("Oops", &fp->ptregs,0); - force_sig(SIGKILL, current); - return; - } - } else { - /* user fault */ - if (!(ssw & (FC | FB)) && !(ssw & DF)) - /* not an instruction fault or data fault! BAD */ - panic ("USER BUSERR w/o instruction or data fault"); - } - - - /* First handle the data fault, if any. */ - if (ssw & DF) { - addr = fp->un.fmtb.daddr; - -// errorcode bit 0: 0 -> no page 1 -> protection fault -// errorcode bit 1: 0 -> read fault 1 -> write fault - -// (buserr_type & SUN3_BUSERR_PROTERR) -> protection fault -// (buserr_type & SUN3_BUSERR_INVALID) -> invalid page fault - - if (buserr_type & SUN3_BUSERR_PROTERR) - errorcode = 0x01; - else if (buserr_type & SUN3_BUSERR_INVALID) - errorcode = 0x00; - else { -#ifdef DEBUG - printk ("*** unexpected busfault type=%#04x\n", buserr_type); - printk ("invalid %s access at %#lx from pc %#lx\n", - !(ssw & RW) ? "write" : "read", addr, - fp->ptregs.pc); -#endif - die_if_kernel ("Oops", &fp->ptregs, buserr_type); - force_sig (SIGBUS, current); - return; - } - -//todo: wtf is RM bit? --m - if (!(ssw & RW) || ssw & RM) - errorcode |= 0x02; - - /* Handle page fault. */ - do_page_fault (&fp->ptregs, addr, errorcode); - - /* Retry the data fault now. */ - return; - } - - /* Now handle the instruction fault. */ - - /* Get the fault address. */ - if (fp->ptregs.format == 0xA) - addr = fp->ptregs.pc + 4; - else - addr = fp->un.fmtb.baddr; - if (ssw & FC) - addr -= 2; - - if (buserr_type & SUN3_BUSERR_INVALID) { - if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0)) - do_page_fault (&fp->ptregs, addr, 0); - } else { -#ifdef DEBUG - printk ("protection fault on insn access (segv).\n"); -#endif - force_sig (SIGSEGV, current); - } -} -#else -#if defined(CPU_M68020_OR_M68030) -static inline void bus_error030 (struct frame *fp) -{ - volatile unsigned short temp; - unsigned short mmusr; - unsigned long addr, errorcode; - unsigned short ssw = fp->un.fmtb.ssw; -#ifdef DEBUG - unsigned long desc; - - printk ("pid = %x ", current->pid); - printk ("SSW=%#06x ", ssw); - - if (ssw & (FC | FB)) - printk ("Instruction fault at %#010lx\n", - ssw & FC ? - fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 - : - fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); - if (ssw & DF) - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); -#endif - - /* ++andreas: If a data fault and an instruction fault happen - at the same time map in both pages. */ - - /* First handle the data fault, if any. */ - if (ssw & DF) { - addr = fp->un.fmtb.daddr; - -#ifdef DEBUG - asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr), "d" (ssw)); -#else - asm volatile ("ptestr %2,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr), "d" (ssw)); -#endif - mmusr = temp; - -#ifdef DEBUG - printk("mmusr is %#x for addr %#lx in task %p\n", - mmusr, addr, current); - printk("descriptor address is %#lx, contents %#lx\n", - __va(desc), *(unsigned long *)__va(desc)); -#endif - - errorcode = (mmusr & MMU_I) ? 0 : 1; - if (!(ssw & RW) || (ssw & RM)) - errorcode |= 2; - - if (mmusr & (MMU_I | MMU_WP)) { - if (ssw & 4) { - printk("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); - goto buserr; - } - /* Don't try to do anything further if an exception was - handled. */ - if (do_page_fault (&fp->ptregs, addr, errorcode) < 0) - return; - } else if (!(mmusr & MMU_I)) { - /* probably a 020 cas fault */ - if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0) - printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr); - } else if (mmusr & (MMU_B|MMU_L|MMU_S)) { - printk("invalid %s access at %#lx from pc %#lx\n", - !(ssw & RW) ? "write" : "read", addr, - fp->ptregs.pc); - die_if_kernel("Oops",&fp->ptregs,mmusr); - force_sig(SIGSEGV, current); - return; - } else { -#if 0 - static volatile long tlong; -#endif - - printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n", - !(ssw & RW) ? "write" : "read", addr, - fp->ptregs.pc, ssw); - asm volatile ("ptestr #1,%1@,#0\n\t" - "pmove %%psr,%0@" - : /* no outputs */ - : "a" (&temp), "a" (addr)); - mmusr = temp; - - printk ("level 0 mmusr is %#x\n", mmusr); -#if 0 - asm volatile ("pmove %%tt0,%0@" - : /* no outputs */ - : "a" (&tlong)); - printk("tt0 is %#lx, ", tlong); - asm volatile ("pmove %%tt1,%0@" - : /* no outputs */ - : "a" (&tlong)); - printk("tt1 is %#lx\n", tlong); -#endif -#ifdef DEBUG - printk("Unknown SIGSEGV - 1\n"); -#endif - die_if_kernel("Oops",&fp->ptregs,mmusr); - force_sig(SIGSEGV, current); - return; - } - - /* setup an ATC entry for the access about to be retried */ - if (!(ssw & RW) || (ssw & RM)) - asm volatile ("ploadw %1,%0@" : /* no outputs */ - : "a" (addr), "d" (ssw)); - else - asm volatile ("ploadr %1,%0@" : /* no outputs */ - : "a" (addr), "d" (ssw)); - } - - /* Now handle the instruction fault. */ - - if (!(ssw & (FC|FB))) - return; - - if (fp->ptregs.sr & PS_S) { - printk("Instruction fault at %#010lx\n", - fp->ptregs.pc); - buserr: - printk ("BAD KERNEL BUSERR\n"); - die_if_kernel("Oops",&fp->ptregs,0); - force_sig(SIGKILL, current); - return; - } - - /* get the fault address */ - if (fp->ptregs.format == 10) - addr = fp->ptregs.pc + 4; - else - addr = fp->un.fmtb.baddr; - if (ssw & FC) - addr -= 2; - - if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0) - /* Insn fault on same page as data fault. But we - should still create the ATC entry. */ - goto create_atc_entry; - -#ifdef DEBUG - asm volatile ("ptestr #1,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr)); -#else - asm volatile ("ptestr #1,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr)); -#endif - mmusr = temp; - -#ifdef DEBUG - printk ("mmusr is %#x for addr %#lx in task %p\n", - mmusr, addr, current); - printk ("descriptor address is %#lx, contents %#lx\n", - __va(desc), *(unsigned long *)__va(desc)); -#endif - - if (mmusr & MMU_I) - do_page_fault (&fp->ptregs, addr, 0); - else if (mmusr & (MMU_B|MMU_L|MMU_S)) { - printk ("invalid insn access at %#lx from pc %#lx\n", - addr, fp->ptregs.pc); -#ifdef DEBUG - printk("Unknown SIGSEGV - 2\n"); -#endif - die_if_kernel("Oops",&fp->ptregs,mmusr); - force_sig(SIGSEGV, current); - return; - } - -create_atc_entry: - /* setup an ATC entry for the access about to be retried */ - asm volatile ("ploadr #2,%0@" : /* no outputs */ - : "a" (addr)); -} -#endif /* CPU_M68020_OR_M68030 */ -#endif /* !CONFIG_SUN3 */ - -asmlinkage void buserr_c(struct frame *fp) -{ - /* Only set esp0 if coming from user mode */ - if (user_mode(&fp->ptregs)) - current->thread.esp0 = (unsigned long) fp; - -#ifdef DEBUG - printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format); -#endif - - switch (fp->ptregs.format) { -#if defined (CONFIG_M68060) - case 4: /* 68060 access error */ - access_error060 (fp); - break; -#endif -#if defined (CONFIG_M68040) - case 0x7: /* 68040 access error */ - access_error040 (fp); - break; -#endif -#if defined (CPU_M68020_OR_M68030) - case 0xa: - case 0xb: - bus_error030 (fp); - break; -#endif - default: - die_if_kernel("bad frame format",&fp->ptregs,0); -#ifdef DEBUG - printk("Unknown SIGSEGV - 4\n"); -#endif - force_sig(SIGSEGV, current); - } -} - - -static int kstack_depth_to_print = 48; - -void show_trace(unsigned long *stack) -{ - unsigned long *endstack; - unsigned long addr; - int i; - - printk("Call Trace:"); - addr = (unsigned long)stack + THREAD_SIZE - 1; - endstack = (unsigned long *)(addr & -THREAD_SIZE); - i = 0; - while (stack + 1 <= endstack) { - addr = *stack++; - /* - * If the address is either in the text segment of the - * kernel, or in the region which contains vmalloc'ed - * memory, it *may* be the address of a calling - * routine; if so, print it so that someone tracing - * down the cause of the crash will be able to figure - * out the call path that was taken. - */ - if (__kernel_text_address(addr)) { -#ifndef CONFIG_KALLSYMS - if (i % 5 == 0) - printk("\n "); -#endif - printk(" [<%08lx>] %pS\n", addr, (void *)addr); - i++; - } - } - printk("\n"); -} - -void show_registers(struct pt_regs *regs) -{ - struct frame *fp = (struct frame *)regs; - mm_segment_t old_fs = get_fs(); - u16 c, *cp; - unsigned long addr; - int i; - - print_modules(); - printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc); - printk("SR: %04x SP: %p a2: %08lx\n", regs->sr, regs, regs->a2); - printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", - regs->d0, regs->d1, regs->d2, regs->d3); - printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", - regs->d4, regs->d5, regs->a0, regs->a1); - - printk("Process %s (pid: %d, task=%p)\n", - current->comm, task_pid_nr(current), current); - addr = (unsigned long)&fp->un; - printk("Frame format=%X ", regs->format); - switch (regs->format) { - case 0x2: - printk("instr addr=%08lx\n", fp->un.fmt2.iaddr); - addr += sizeof(fp->un.fmt2); - break; - case 0x3: - printk("eff addr=%08lx\n", fp->un.fmt3.effaddr); - addr += sizeof(fp->un.fmt3); - break; - case 0x4: - printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n" - : "eff addr=%08lx pc=%08lx\n"), - fp->un.fmt4.effaddr, fp->un.fmt4.pc); - addr += sizeof(fp->un.fmt4); - break; - case 0x7: - printk("eff addr=%08lx ssw=%04x faddr=%08lx\n", - fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr); - printk("wb 1 stat/addr/data: %04x %08lx %08lx\n", - fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0); - printk("wb 2 stat/addr/data: %04x %08lx %08lx\n", - fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d); - printk("wb 3 stat/addr/data: %04x %08lx %08lx\n", - fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d); - printk("push data: %08lx %08lx %08lx %08lx\n", - fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2, - fp->un.fmt7.pd3); - addr += sizeof(fp->un.fmt7); - break; - case 0x9: - printk("instr addr=%08lx\n", fp->un.fmt9.iaddr); - addr += sizeof(fp->un.fmt9); - break; - case 0xa: - printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", - fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb, - fp->un.fmta.daddr, fp->un.fmta.dobuf); - addr += sizeof(fp->un.fmta); - break; - case 0xb: - printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", - fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb, - fp->un.fmtb.daddr, fp->un.fmtb.dobuf); - printk("baddr=%08lx dibuf=%08lx ver=%x\n", - fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver); - addr += sizeof(fp->un.fmtb); - break; - default: - printk("\n"); - } - show_stack(NULL, (unsigned long *)addr); - - printk("Code:"); - set_fs(KERNEL_DS); - cp = (u16 *)regs->pc; - for (i = -8; i < 16; i++) { - if (get_user(c, cp + i) && i >= 0) { - printk(" Bad PC value."); - break; - } - printk(i ? " %04x" : " <%04x>", c); - } - set_fs(old_fs); - printk ("\n"); -} - -void show_stack(struct task_struct *task, unsigned long *stack) -{ - unsigned long *p; - unsigned long *endstack; - int i; - - if (!stack) { - if (task) - stack = (unsigned long *)task->thread.esp0; - else - stack = (unsigned long *)&stack; - } - endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE); - - printk("Stack from %08lx:", (unsigned long)stack); - p = stack; - for (i = 0; i < kstack_depth_to_print; i++) { - if (p + 1 > endstack) - break; - if (i % 8 == 0) - printk("\n "); - printk(" %08lx", *p++); - } - printk("\n"); - show_trace(stack); -} - -/* - * The architecture-independent backtrace generator - */ -void dump_stack(void) -{ - unsigned long stack; - - show_trace(&stack); -} - -EXPORT_SYMBOL(dump_stack); - -void bad_super_trap (struct frame *fp) -{ - console_verbose(); - if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names)) - printk ("*** %s *** FORMAT=%X\n", - vec_names[(fp->ptregs.vector) >> 2], - fp->ptregs.format); - else - printk ("*** Exception %d *** FORMAT=%X\n", - (fp->ptregs.vector) >> 2, - fp->ptregs.format); - if (fp->ptregs.vector >> 2 == VEC_ADDRERR && CPU_IS_020_OR_030) { - unsigned short ssw = fp->un.fmtb.ssw; - - printk ("SSW=%#06x ", ssw); - - if (ssw & RC) - printk ("Pipe stage C instruction fault at %#010lx\n", - (fp->ptregs.format) == 0xA ? - fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2); - if (ssw & RB) - printk ("Pipe stage B instruction fault at %#010lx\n", - (fp->ptregs.format) == 0xA ? - fp->ptregs.pc + 4 : fp->un.fmtb.baddr); - if (ssw & DF) - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, space_names[ssw & DFC], - fp->ptregs.pc); - } - printk ("Current process id is %d\n", task_pid_nr(current)); - die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); -} - -asmlinkage void trap_c(struct frame *fp) -{ - int sig; - siginfo_t info; - - if (fp->ptregs.sr & PS_S) { - if (fp->ptregs.vector == VEC_TRACE << 2) { - /* traced a trapping instruction on a 68020/30, - * real exception will be executed afterwards. - */ - } else if (!handle_kernel_fault(&fp->ptregs)) - bad_super_trap(fp); - return; - } - - /* send the appropriate signal to the user program */ - switch ((fp->ptregs.vector) >> 2) { - case VEC_ADDRERR: - info.si_code = BUS_ADRALN; - sig = SIGBUS; - break; - case VEC_ILLEGAL: - case VEC_LINE10: - case VEC_LINE11: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - case VEC_PRIV: - info.si_code = ILL_PRVOPC; - sig = SIGILL; - break; - case VEC_COPROC: - info.si_code = ILL_COPROC; - sig = SIGILL; - break; - case VEC_TRAP1: - case VEC_TRAP2: - case VEC_TRAP3: - case VEC_TRAP4: - case VEC_TRAP5: - case VEC_TRAP6: - case VEC_TRAP7: - case VEC_TRAP8: - case VEC_TRAP9: - case VEC_TRAP10: - case VEC_TRAP11: - case VEC_TRAP12: - case VEC_TRAP13: - case VEC_TRAP14: - info.si_code = ILL_ILLTRP; - sig = SIGILL; - break; - case VEC_FPBRUC: - case VEC_FPOE: - case VEC_FPNAN: - info.si_code = FPE_FLTINV; - sig = SIGFPE; - break; - case VEC_FPIR: - info.si_code = FPE_FLTRES; - sig = SIGFPE; - break; - case VEC_FPDIVZ: - info.si_code = FPE_FLTDIV; - sig = SIGFPE; - break; - case VEC_FPUNDER: - info.si_code = FPE_FLTUND; - sig = SIGFPE; - break; - case VEC_FPOVER: - info.si_code = FPE_FLTOVF; - sig = SIGFPE; - break; - case VEC_ZERODIV: - info.si_code = FPE_INTDIV; - sig = SIGFPE; - break; - case VEC_CHK: - case VEC_TRAP: - info.si_code = FPE_INTOVF; - sig = SIGFPE; - break; - case VEC_TRACE: /* ptrace single step */ - info.si_code = TRAP_TRACE; - sig = SIGTRAP; - break; - case VEC_TRAP15: /* breakpoint */ - info.si_code = TRAP_BRKPT; - sig = SIGTRAP; - break; - default: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - } - info.si_signo = sig; - info.si_errno = 0; - switch (fp->ptregs.format) { - default: - info.si_addr = (void *) fp->ptregs.pc; - break; - case 2: - info.si_addr = (void *) fp->un.fmt2.iaddr; - break; - case 7: - info.si_addr = (void *) fp->un.fmt7.effaddr; - break; - case 9: - info.si_addr = (void *) fp->un.fmt9.iaddr; - break; - case 10: - info.si_addr = (void *) fp->un.fmta.daddr; - break; - case 11: - info.si_addr = (void *) fp->un.fmtb.daddr; - break; - } - force_sig_info (sig, &info, current); -} - -void die_if_kernel (char *str, struct pt_regs *fp, int nr) -{ - if (!(fp->sr & PS_S)) - return; - - console_verbose(); - printk("%s: %08x\n",str,nr); - show_registers(fp); - add_taint(TAINT_DIE); - do_exit(SIGSEGV); -} - -/* - * This function is called if an error occur while accessing - * user-space from the fpsp040 code. - */ -asmlinkage void fpsp040_die(void) -{ - do_exit(SIGSEGV); -} - -#ifdef CONFIG_M68KFPU_EMU -asmlinkage void fpemu_signal(int signal, int code, void *addr) -{ - siginfo_t info; - - info.si_signo = signal; - info.si_errno = 0; - info.si_code = code; - info.si_addr = addr; - force_sig_info(signal, &info, current); -} -#endif diff --git a/arch/m68k/kernel/traps_no.c b/arch/m68k/kernel/traps_no.c deleted file mode 100644 index e67b8c806959..000000000000 --- a/arch/m68k/kernel/traps_no.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * linux/arch/m68knommu/kernel/traps.c - * - * Copyright (C) 1993, 1994 by Hamish Macdonald - * - * 68040 fixes by Michael Rausch - * 68040 fixes by Martin Apel - * 68060 fixes by Roman Hodek - * 68060 fixes by Jesper Skov - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * Sets up all exception vectors - */ -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/user.h> -#include <linux/string.h> -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/kallsyms.h> - -#include <asm/setup.h> -#include <asm/fpu.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/traps.h> -#include <asm/pgtable.h> -#include <asm/machdep.h> -#include <asm/siginfo.h> - -static char const * const vec_names[] = { - "RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR", - "ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc", - "PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111", - "UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION", - "FORMAT ERROR", "UNINITIALIZED INTERRUPT", - "UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17", - "UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19", - "UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21", - "UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23", - "SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT", - "LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT", - "SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3", - "TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7", - "TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11", - "TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15", - "FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW", - "FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN", - "FPCP UNSUPPORTED OPERATION", - "MMU CONFIGURATION ERROR" -}; - -void die_if_kernel(char *str, struct pt_regs *fp, int nr) -{ - if (!(fp->sr & PS_S)) - return; - - console_verbose(); - printk(KERN_EMERG "%s: %08x\n",str,nr); - printk(KERN_EMERG "PC: [<%08lx>]\nSR: %04x SP: %p a2: %08lx\n", - fp->pc, fp->sr, fp, fp->a2); - printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", - fp->d0, fp->d1, fp->d2, fp->d3); - printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", - fp->d4, fp->d5, fp->a0, fp->a1); - - printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n", - current->comm, current->pid, PAGE_SIZE+(unsigned long)current); - show_stack(NULL, (unsigned long *)(fp + 1)); - add_taint(TAINT_DIE); - do_exit(SIGSEGV); -} - -asmlinkage void buserr_c(struct frame *fp) -{ - /* Only set esp0 if coming from user mode */ - if (user_mode(&fp->ptregs)) - current->thread.esp0 = (unsigned long) fp; - -#if defined(DEBUG) - printk (KERN_DEBUG "*** Bus Error *** Format is %x\n", fp->ptregs.format); -#endif - - die_if_kernel("bad frame format",&fp->ptregs,0); -#if defined(DEBUG) - printk(KERN_DEBUG "Unknown SIGSEGV - 4\n"); -#endif - force_sig(SIGSEGV, current); -} - -static void print_this_address(unsigned long addr, int i) -{ -#ifdef CONFIG_KALLSYMS - printk(KERN_EMERG " [%08lx] ", addr); - print_symbol(KERN_CONT "%s\n", addr); -#else - if (i % 5) - printk(KERN_CONT " [%08lx] ", addr); - else - printk(KERN_EMERG " [%08lx] ", addr); - i++; -#endif -} - -int kstack_depth_to_print = 48; - -static void __show_stack(struct task_struct *task, unsigned long *stack) -{ - unsigned long *endstack, addr; -#ifdef CONFIG_FRAME_POINTER - unsigned long *last_stack; -#endif - int i; - - if (!stack) - stack = (unsigned long *)task->thread.ksp; - - addr = (unsigned long) stack; - endstack = (unsigned long *) PAGE_ALIGN(addr); - - printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); - for (i = 0; i < kstack_depth_to_print; i++) { - if (stack + 1 + i > endstack) - break; - if (i % 8 == 0) - printk(KERN_EMERG " "); - printk(KERN_CONT " %08lx", *(stack + i)); - } - printk("\n"); - i = 0; - -#ifdef CONFIG_FRAME_POINTER - printk(KERN_EMERG "Call Trace:\n"); - - last_stack = stack - 1; - while (stack <= endstack && stack > last_stack) { - - addr = *(stack + 1); - print_this_address(addr, i); - i++; - - last_stack = stack; - stack = (unsigned long *)*stack; - } - printk("\n"); -#else - printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n"); - while (stack <= endstack) { - addr = *stack++; - /* - * If the address is either in the text segment of the kernel, - * or in a region which is occupied by a module then it *may* - * be the address of a calling routine; if so, print it so that - * someone tracing down the cause of the crash will be able to - * figure out the call path that was taken. - */ - if (__kernel_text_address(addr)) { - print_this_address(addr, i); - i++; - } - } - printk(KERN_CONT "\n"); -#endif -} - -void bad_super_trap(struct frame *fp) -{ - int vector = (fp->ptregs.vector >> 2) & 0xff; - - console_verbose(); - if (vector < ARRAY_SIZE(vec_names)) - printk (KERN_WARNING "*** %s *** FORMAT=%X\n", - vec_names[vector], - fp->ptregs.format); - else - printk (KERN_WARNING "*** Exception %d *** FORMAT=%X\n", - vector, - fp->ptregs.format); - printk (KERN_WARNING "Current process id is %d\n", current->pid); - die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); -} - -asmlinkage void trap_c(struct frame *fp) -{ - int sig; - int vector = (fp->ptregs.vector >> 2) & 0xff; - siginfo_t info; - - if (fp->ptregs.sr & PS_S) { - if (vector == VEC_TRACE) { - /* traced a trapping instruction */ - } else - bad_super_trap(fp); - return; - } - - /* send the appropriate signal to the user program */ - switch (vector) { - case VEC_ADDRERR: - info.si_code = BUS_ADRALN; - sig = SIGBUS; - break; - case VEC_ILLEGAL: - case VEC_LINE10: - case VEC_LINE11: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - case VEC_PRIV: - info.si_code = ILL_PRVOPC; - sig = SIGILL; - break; - case VEC_COPROC: - info.si_code = ILL_COPROC; - sig = SIGILL; - break; - case VEC_TRAP1: /* gdbserver breakpoint */ - fp->ptregs.pc -= 2; - info.si_code = TRAP_TRACE; - sig = SIGTRAP; - break; - case VEC_TRAP2: - case VEC_TRAP3: - case VEC_TRAP4: - case VEC_TRAP5: - case VEC_TRAP6: - case VEC_TRAP7: - case VEC_TRAP8: - case VEC_TRAP9: - case VEC_TRAP10: - case VEC_TRAP11: - case VEC_TRAP12: - case VEC_TRAP13: - case VEC_TRAP14: - info.si_code = ILL_ILLTRP; - sig = SIGILL; - break; - case VEC_FPBRUC: - case VEC_FPOE: - case VEC_FPNAN: - info.si_code = FPE_FLTINV; - sig = SIGFPE; - break; - case VEC_FPIR: - info.si_code = FPE_FLTRES; - sig = SIGFPE; - break; - case VEC_FPDIVZ: - info.si_code = FPE_FLTDIV; - sig = SIGFPE; - break; - case VEC_FPUNDER: - info.si_code = FPE_FLTUND; - sig = SIGFPE; - break; - case VEC_FPOVER: - info.si_code = FPE_FLTOVF; - sig = SIGFPE; - break; - case VEC_ZERODIV: - info.si_code = FPE_INTDIV; - sig = SIGFPE; - break; - case VEC_CHK: - case VEC_TRAP: - info.si_code = FPE_INTOVF; - sig = SIGFPE; - break; - case VEC_TRACE: /* ptrace single step */ - info.si_code = TRAP_TRACE; - sig = SIGTRAP; - break; - case VEC_TRAP15: /* breakpoint */ - info.si_code = TRAP_BRKPT; - sig = SIGTRAP; - break; - default: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - } - info.si_signo = sig; - info.si_errno = 0; - switch (fp->ptregs.format) { - default: - info.si_addr = (void *) fp->ptregs.pc; - break; - case 2: - info.si_addr = (void *) fp->un.fmt2.iaddr; - break; - case 7: - info.si_addr = (void *) fp->un.fmt7.effaddr; - break; - case 9: - info.si_addr = (void *) fp->un.fmt9.iaddr; - break; - case 10: - info.si_addr = (void *) fp->un.fmta.daddr; - break; - case 11: - info.si_addr = (void *) fp->un.fmtb.daddr; - break; - } - force_sig_info (sig, &info, current); -} - -asmlinkage void set_esp0(unsigned long ssp) -{ - current->thread.esp0 = ssp; -} - -/* - * The architecture-independent backtrace generator - */ -void dump_stack(void) -{ - /* - * We need frame pointers for this little trick, which works as follows: - * - * +------------+ 0x00 - * | Next SP | -> 0x0c - * +------------+ 0x04 - * | Caller | - * +------------+ 0x08 - * | Local vars | -> our stack var - * +------------+ 0x0c - * | Next SP | -> 0x18, that is what we pass to show_stack() - * +------------+ 0x10 - * | Caller | - * +------------+ 0x14 - * | Local vars | - * +------------+ 0x18 - * | ... | - * +------------+ - */ - - unsigned long *stack; - - stack = (unsigned long *)&stack; - stack++; - __show_stack(current, stack); -} -EXPORT_SYMBOL(dump_stack); - -void show_stack(struct task_struct *task, unsigned long *stack) -{ - if (!stack && !task) - dump_stack(); - else - __show_stack(task, stack); -} diff --git a/arch/m68k/kernel/vectors.c b/arch/m68k/kernel/vectors.c new file mode 100644 index 000000000000..147b03fbc71e --- /dev/null +++ b/arch/m68k/kernel/vectors.c @@ -0,0 +1,145 @@ +/* + * vectors.c + * + * Copyright (C) 1993, 1994 by Hamish Macdonald + * + * 68040 fixes by Michael Rausch + * 68040 fixes by Martin Apel + * 68040 fixes and writeback by Richard Zidlicky + * 68060 fixes by Roman Hodek + * 68060 fixes by Jesper Skov + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/* + * Sets up all exception vectors + */ +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/kallsyms.h> + +#include <asm/setup.h> +#include <asm/fpu.h> +#include <asm/system.h> +#include <asm/traps.h> + +/* assembler routines */ +asmlinkage void system_call(void); +asmlinkage void buserr(void); +asmlinkage void trap(void); +asmlinkage void nmihandler(void); +#ifdef CONFIG_M68KFPU_EMU +asmlinkage void fpu_emu(void); +#endif + +e_vector vectors[256]; + +/* nmi handler for the Amiga */ +asm(".text\n" + __ALIGN_STR "\n" + "nmihandler: rte"); + +/* + * this must be called very early as the kernel might + * use some instruction that are emulated on the 060 + * and so we're prepared for early probe attempts (e.g. nf_init). + */ +void __init base_trap_init(void) +{ + if (MACH_IS_SUN3X) { + extern e_vector *sun3x_prom_vbr; + + __asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr)); + } + + /* setup the exception vector table */ + __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors)); + + if (CPU_IS_060) { + /* set up ISP entry points */ + asmlinkage void unimp_vec(void) asm ("_060_isp_unimp"); + + vectors[VEC_UNIMPII] = unimp_vec; + } + + vectors[VEC_BUSERR] = buserr; + vectors[VEC_ILLEGAL] = trap; + vectors[VEC_SYS] = system_call; +} + +void __init trap_init (void) +{ + int i; + + for (i = VEC_SPUR; i <= VEC_INT7; i++) + vectors[i] = bad_inthandler; + + for (i = 0; i < VEC_USER; i++) + if (!vectors[i]) + vectors[i] = trap; + + for (i = VEC_USER; i < 256; i++) + vectors[i] = bad_inthandler; + +#ifdef CONFIG_M68KFPU_EMU + if (FPU_IS_EMU) + vectors[VEC_LINE11] = fpu_emu; +#endif + + if (CPU_IS_040 && !FPU_IS_EMU) { + /* set up FPSP entry points */ + asmlinkage void dz_vec(void) asm ("dz"); + asmlinkage void inex_vec(void) asm ("inex"); + asmlinkage void ovfl_vec(void) asm ("ovfl"); + asmlinkage void unfl_vec(void) asm ("unfl"); + asmlinkage void snan_vec(void) asm ("snan"); + asmlinkage void operr_vec(void) asm ("operr"); + asmlinkage void bsun_vec(void) asm ("bsun"); + asmlinkage void fline_vec(void) asm ("fline"); + asmlinkage void unsupp_vec(void) asm ("unsupp"); + + vectors[VEC_FPDIVZ] = dz_vec; + vectors[VEC_FPIR] = inex_vec; + vectors[VEC_FPOVER] = ovfl_vec; + vectors[VEC_FPUNDER] = unfl_vec; + vectors[VEC_FPNAN] = snan_vec; + vectors[VEC_FPOE] = operr_vec; + vectors[VEC_FPBRUC] = bsun_vec; + vectors[VEC_LINE11] = fline_vec; + vectors[VEC_FPUNSUP] = unsupp_vec; + } + + if (CPU_IS_060 && !FPU_IS_EMU) { + /* set up IFPSP entry points */ + asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan"); + asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr"); + asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl"); + asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl"); + asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz"); + asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex"); + asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline"); + asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp"); + asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd"); + + vectors[VEC_FPNAN] = snan_vec6; + vectors[VEC_FPOE] = operr_vec6; + vectors[VEC_FPOVER] = ovfl_vec6; + vectors[VEC_FPUNDER] = unfl_vec6; + vectors[VEC_FPDIVZ] = dz_vec6; + vectors[VEC_FPIR] = inex_vec6; + vectors[VEC_LINE11] = fline_vec6; + vectors[VEC_FPUNSUP] = unsupp_vec6; + vectors[VEC_UNIMPEA] = effadd_vec6; + } + + /* if running on an amiga, make the NMI interrupt do nothing */ + if (MACH_IS_AMIGA) { + vectors[VEC_INT7] = nmihandler; + } +} + diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S index 7dc4087a9545..4e2389340837 100644 --- a/arch/m68k/kernel/vmlinux.lds_no.S +++ b/arch/m68k/kernel/vmlinux.lds_no.S @@ -77,7 +77,6 @@ SECTIONS { *(.rodata) *(.rodata.*) *(__vermagic) /* Kernel version magic */ - *(__markers_strings) *(.rodata1) *(.rodata.str1.1) diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c index 064889316974..10ca051d56b8 100644 --- a/arch/m68k/lib/memcpy.c +++ b/arch/m68k/lib/memcpy.c @@ -22,6 +22,15 @@ void *memcpy(void *to, const void *from, size_t n) from = cfrom; n--; } +#if defined(CONFIG_M68000) + if ((long)from & 1) { + char *cto = to; + const char *cfrom = from; + for (; n; n--) + *cto++ = *cfrom++; + return xto; + } +#endif if (n > 2 && (long)to & 2) { short *sto = to; const short *sfrom = from; diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 900d899f3323..f92190c159b4 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -370,7 +370,7 @@ int mac_irq_pending(unsigned int irq) break; case 4: if (psc_present) - psc_irq_pending(irq); + return psc_irq_pending(irq); break; } return 0; diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c index e023fc6b37e5..eb915551de69 100644 --- a/arch/m68k/mac/misc.c +++ b/arch/m68k/mac/misc.c @@ -304,35 +304,41 @@ static void via_write_pram(int offset, __u8 data) static long via_read_time(void) { union { - __u8 cdata[4]; - long idata; + __u8 cdata[4]; + long idata; } result, last_result; - int ct; + int count = 1; + + via_pram_command(0x81, &last_result.cdata[3]); + via_pram_command(0x85, &last_result.cdata[2]); + via_pram_command(0x89, &last_result.cdata[1]); + via_pram_command(0x8D, &last_result.cdata[0]); /* * The NetBSD guys say to loop until you get the same reading * twice in a row. */ - ct = 0; - do { - if (++ct > 10) { - printk("via_read_time: couldn't get valid time, " - "last read = 0x%08lx and 0x%08lx\n", - last_result.idata, result.idata); - break; - } - - last_result.idata = result.idata; - result.idata = 0; - + while (1) { via_pram_command(0x81, &result.cdata[3]); via_pram_command(0x85, &result.cdata[2]); via_pram_command(0x89, &result.cdata[1]); via_pram_command(0x8D, &result.cdata[0]); - } while (result.idata != last_result.idata); - return result.idata - RTC_OFFSET; + if (result.idata == last_result.idata) + return result.idata - RTC_OFFSET; + + if (++count > 10) + break; + + last_result.idata = result.idata; + } + + pr_err("via_read_time: failed to read a stable value; " + "got 0x%08lx then 0x%08lx\n", + last_result.idata, result.idata); + + return 0; } /* diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 50cd12cf28d9..1e33d39ca9a0 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -32,6 +32,7 @@ #include <linux/gfp.h> #include <asm/setup.h> +#include <asm/sections.h> #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -44,9 +45,6 @@ */ void *empty_zero_page; -extern unsigned long memory_start; -extern unsigned long memory_end; - /* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. @@ -78,8 +76,6 @@ void __init mem_init(void) { int codek = 0, datak = 0, initk = 0; unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; - extern unsigned int _ramend, _rambase; unsigned long len = _ramend - _rambase; unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */ @@ -95,9 +91,9 @@ void __init mem_init(void) /* this will put all memory onto the freelists */ totalram_pages = free_all_bootmem(); - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; + codek = (_etext - _stext) >> 10; + datak = (_ebss - _sdata) >> 10; + initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n", @@ -129,22 +125,21 @@ void free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; - extern char __init_begin, __init_end; /* * The following code should be cool even if these sections * are not page aligned. */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + addr = PAGE_ALIGN((unsigned long) __init_begin); /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long) __init_begin)), (int)(addr - PAGE_SIZE)); #endif } diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c index 621238f1a219..8a98683f1b15 100644 --- a/arch/m68k/platform/520x/config.c +++ b/arch/m68k/platform/520x/config.c @@ -91,9 +91,9 @@ static struct resource m520x_qspi_resources[] = { }, }; -#define MCFQSPI_CS0 62 -#define MCFQSPI_CS1 63 -#define MCFQSPI_CS2 44 +#define MCFQSPI_CS0 46 +#define MCFQSPI_CS1 47 +#define MCFQSPI_CS2 27 static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control) { diff --git a/arch/m68k/platform/520x/gpio.c b/arch/m68k/platform/520x/gpio.c index d757328563d1..9bcc3e4b60c5 100644 --- a/arch/m68k/platform/520x/gpio.c +++ b/arch/m68k/platform/520x/gpio.c @@ -38,42 +38,6 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { }, { .gpio_chip = { - .label = "BUSCTL", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value_fast, - .base = 8, - .ngpio = 4, - }, - .pddr = (void __iomem *) MCFGPIO_PDDR_BUSCTL, - .podr = (void __iomem *) MCFGPIO_PODR_BUSCTL, - .ppdr = (void __iomem *) MCFGPIO_PPDSDR_BUSCTL, - .setr = (void __iomem *) MCFGPIO_PPDSDR_BUSCTL, - .clrr = (void __iomem *) MCFGPIO_PCLRR_BUSCTL, - }, - { - .gpio_chip = { - .label = "BE", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value_fast, - .base = 16, - .ngpio = 4, - }, - .pddr = (void __iomem *) MCFGPIO_PDDR_BE, - .podr = (void __iomem *) MCFGPIO_PODR_BE, - .ppdr = (void __iomem *) MCFGPIO_PPDSDR_BE, - .setr = (void __iomem *) MCFGPIO_PPDSDR_BE, - .clrr = (void __iomem *) MCFGPIO_PCLRR_BE, - }, - { - .gpio_chip = { .label = "CS", .request = mcf_gpio_request, .free = mcf_gpio_free, @@ -81,7 +45,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 25, + .base = 9, .ngpio = 3, }, .pddr = (void __iomem *) MCFGPIO_PDDR_CS, @@ -99,7 +63,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 32, + .base = 16, .ngpio = 4, }, .pddr = (void __iomem *) MCFGPIO_PDDR_FECI2C, @@ -117,7 +81,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 40, + .base = 24, .ngpio = 4, }, .pddr = (void __iomem *) MCFGPIO_PDDR_QSPI, @@ -135,7 +99,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 48, + .base = 32, .ngpio = 4, }, .pddr = (void __iomem *) MCFGPIO_PDDR_TIMER, @@ -153,7 +117,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 56, + .base = 40, .ngpio = 8, }, .pddr = (void __iomem *) MCFGPIO_PDDR_UART, @@ -171,7 +135,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 64, + .base = 48, .ngpio = 8, }, .pddr = (void __iomem *) MCFGPIO_PDDR_FECH, @@ -189,7 +153,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 72, + .base = 56, .ngpio = 8, }, .pddr = (void __iomem *) MCFGPIO_PDDR_FECL, diff --git a/arch/m68k/platform/68328/Makefile b/arch/m68k/platform/68328/Makefile index 5e5435552d56..e4dfd8fde068 100644 --- a/arch/m68k/platform/68328/Makefile +++ b/arch/m68k/platform/68328/Makefile @@ -2,7 +2,10 @@ # Makefile for arch/m68knommu/platform/68328. # -head-y = head-$(MODEL).o +model-y := ram +model-$(CONFIG_ROMKERNEL) := rom + +head-y = head-$(model-y).o head-$(CONFIG_PILOT) = head-pilot.o head-$(CONFIG_DRAGEN2) = head-de2.o diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index 293e1eba9acc..5c39b80ed7de 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -67,7 +67,7 @@ ret_from_signal: jra ret_from_exception ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS /* save top of frame*/ pea %sp@ @@ -129,7 +129,7 @@ Lsignal_return: * This is the main interrupt handler, responsible for calling process_int() */ inthandler1: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -140,7 +140,7 @@ inthandler1: bra ret_from_interrupt inthandler2: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -151,7 +151,7 @@ inthandler2: bra ret_from_interrupt inthandler3: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -162,7 +162,7 @@ inthandler3: bra ret_from_interrupt inthandler4: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -173,7 +173,7 @@ inthandler4: bra ret_from_interrupt inthandler5: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -184,7 +184,7 @@ inthandler5: bra ret_from_interrupt inthandler6: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -195,7 +195,7 @@ inthandler6: bra ret_from_interrupt inthandler7: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -206,7 +206,7 @@ inthandler7: bra ret_from_interrupt inthandler: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 diff --git a/arch/m68k/platform/68360/Makefile b/arch/m68k/platform/68360/Makefile index cf5af73a5789..f6f434383049 100644 --- a/arch/m68k/platform/68360/Makefile +++ b/arch/m68k/platform/68360/Makefile @@ -1,10 +1,12 @@ # # Makefile for arch/m68knommu/platform/68360. # +model-y := ram +model-$(CONFIG_ROMKERNEL) := rom obj-y := config.o commproc.o entry.o ints.o extra-y := head.o -$(obj)/head.o: $(obj)/head-$(MODEL).o - ln -sf head-$(MODEL).o $(obj)/head.o +$(obj)/head.o: $(obj)/head-$(model-y).o + ln -sf head-$(model-y).o $(obj)/head.o diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index abbb89672ea0..aa47d1d49929 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -63,7 +63,7 @@ ret_from_signal: jra ret_from_exception ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS /* save top of frame*/ pea %sp@ @@ -125,7 +125,7 @@ Lsignal_return: * This is the main interrupt handler, responsible for calling do_IRQ() */ inthandler: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and.l #0x3ff, %d0 lsr.l #0x02, %d0 diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index bd27242c2f43..3157461a8d1d 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -61,7 +61,7 @@ enosys: bra 1f ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS move #0x2000,%sr /* enable intrs again */ cmpl #NR_syscalls,%d0 @@ -165,9 +165,7 @@ Lsignal_return: * sources). Calls up to high level code to do all the work. */ ENTRY(inthandler) - SAVE_ALL - moveq #-1,%d0 - movel %d0,%sp@(PT_OFF_ORIG_D0) + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */ andl #0x03fc,%d0 /* mask out vector only */ diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index b26d5f55e91d..93f4c4cd3c45 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): char/joystick/* # most of this should work, not # in default config.in block/q40ide.c # startup for ide - ide* # see Documentation/ide.txt + ide* # see Documentation/ide/ide.txt floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h index 8fbb0ec10233..a569514cf19f 100644 --- a/arch/microblaze/include/asm/dma-mapping.h +++ b/arch/microblaze/include/asm/dma-mapping.h @@ -16,7 +16,7 @@ #define _ASM_MICROBLAZE_DMA_MAPPING_H /* - * See Documentation/PCI/PCI-DMA-mapping.txt and + * See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. */ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index d915a122c865..8789daa2a346 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -173,7 +173,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid /* 170 */ .long sys_getresgid .long sys_prctl diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 213f2d671669..36a133e5ee35 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -304,11 +304,11 @@ asmlinkage void __init mmu_init(void) /* Map in all of RAM starting at CONFIG_KERNEL_START */ mapin_ram(); -#ifdef HIGHMEM_START_BOOL - ioremap_base = HIGHMEM_START; +#ifdef CONFIG_HIGHMEM_START_BOOL + ioremap_base = CONFIG_HIGHMEM_START; #else ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM */ +#endif /* CONFIG_HIGHMEM_START_BOOL */ ioremap_bot = ioremap_base; /* Initialize the context management stuff */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 177cdaf83564..4cbc6d8de210 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -24,6 +24,7 @@ config MIPS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select HAVE_ARCH_JUMP_LABEL + select IRQ_FORCED_THREADING menu "Machine selection" @@ -91,15 +92,8 @@ config BCM47XX select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU - select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN - select SSB - select SSB_DRIVER_MIPS - select SSB_DRIVER_EXTIF - select SSB_EMBEDDED - select SSB_B43_PCI_BRIDGE if PCI - select SSB_PCICORE_HOSTMODE if PCI select GENERIC_GPIO select SYS_HAS_EARLY_PRINTK select CFE @@ -722,6 +716,7 @@ config CAVIUM_OCTEON_SIMULATOR select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_HOTPLUG_CPU select SYS_HAS_CPU_CAVIUM_OCTEON + select HOLES_IN_ZONE help The Octeon simulator is software performance model of the Cavium Octeon Processor. It supports simulating Octeon processors on x86 @@ -744,6 +739,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select ZONE_DMA32 select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI + select HOLES_IN_ZONE help This option supports all of the Octeon reference boards from Cavium Networks. It builds a kernel that dynamically determines the Octeon @@ -788,6 +784,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/ath79/Kconfig" +source "arch/mips/bcm47xx/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" @@ -973,6 +970,9 @@ config ISA_DMA_API config GENERIC_GPIO bool +config HOLES_IN_ZONE + bool + # # Endianess selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 3b2c18b14341..f72c48d4804c 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -492,7 +492,7 @@ static void __init alchemy_setup_macs(int ctype) memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); ret = platform_device_register(&au1xxx_eth0_device); - if (!ret) + if (ret) printk(KERN_INFO "Alchemy: failed to register MAC0\n"); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index 647e518c90bc..b86324a42601 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -158,15 +158,21 @@ static void restore_core_regs(void) void au_sleep(void) { - int cpuid = alchemy_get_cputype(); - if (cpuid != ALCHEMY_CPU_UNKNOWN) { - save_core_regs(); - if (cpuid <= ALCHEMY_CPU_AU1500) - alchemy_sleep_au1000(); - else if (cpuid <= ALCHEMY_CPU_AU1200) - alchemy_sleep_au1550(); - restore_core_regs(); + save_core_regs(); + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + alchemy_sleep_au1000(); + break; + case ALCHEMY_CPU_AU1550: + case ALCHEMY_CPU_AU1200: + alchemy_sleep_au1550(); + break; } + + restore_core_regs(); } #endif /* CONFIG_PM */ diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c index 596ad00e7f05..463d2c4d9441 100644 --- a/arch/mips/alchemy/devboards/bcsr.c +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -89,8 +89,12 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d) { unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT); + disable_irq_nosync(irq); + for ( ; bisr; bisr &= bisr - 1) generic_handle_irq(bcsr_csc_base + __ffs(bisr)); + + enable_irq(irq); } /* NOTE: both the enable and mask bits must be cleared, otherwise the diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c index fbb55935b99e..dda090bf74e6 100644 --- a/arch/mips/alchemy/devboards/db1200/platform.c +++ b/arch/mips/alchemy/devboards/db1200/platform.c @@ -422,6 +422,7 @@ static struct resource au1200_psc1_res[] = { }, }; +/* AC97 or I2S device */ static struct platform_device db1200_audio_dev = { /* name assigned later based on switch setting */ .id = 1, /* PSC ID */ @@ -429,19 +430,32 @@ static struct platform_device db1200_audio_dev = { .resource = au1200_psc1_res, }; +/* DB1200 ASoC card device */ +static struct platform_device db1200_sound_dev = { + /* name assigned later based on switch setting */ + .id = 1, /* PSC ID */ +}; + static struct platform_device db1200_stac_dev = { .name = "ac97-codec", .id = 1, /* on PSC1 */ }; +static struct platform_device db1200_audiodma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* PSC ID */ +}; + static struct platform_device *db1200_devs[] __initdata = { NULL, /* PSC0, selected by S6.8 */ &db1200_ide_dev, &db1200_eth_dev, &db1200_rtc_dev, &db1200_nand_dev, + &db1200_audiodma_dev, &db1200_audio_dev, &db1200_stac_dev, + &db1200_sound_dev, }; static int __init db1200_dev_init(void) @@ -501,10 +515,12 @@ static int __init db1200_dev_init(void) if (sw == BCSR_SWITCHES_DIP_8) { bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); db1200_audio_dev.name = "au1xpsc_i2s"; + db1200_sound_dev.name = "db1200-i2s"; printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); } else { bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); db1200_audio_dev.name = "au1xpsc_ac97"; + db1200_sound_dev.name = "db1200-ac97"; printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); } diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index 1dac4f27d334..4a8980027ecf 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -23,13 +23,6 @@ void __init board_setup(void) unsigned long freq0, clksrc, div, pfc; unsigned short whoami; - /* Set Config[OD] (disable overlapping bus transaction): - * This gets rid of a _lot_ of spurious interrupts (especially - * wrt. IDE); but incurs ~10% performance hit in some - * cpu-bound applications. - */ - set_c0_config(1 << 19); - bcsr_init(DB1200_BCSR_PHYS_ADDR, DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c index 978d5ab3d678..7057d28f7301 100644 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ b/arch/mips/alchemy/devboards/db1x00/platform.c @@ -19,8 +19,11 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/platform_device.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1000_dma.h> #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" @@ -85,6 +88,45 @@ #endif #endif +static struct resource alchemy_ac97c_res[] = { + [0] = { + .start = AU1000_AC97_PHYS_ADDR, + .end = AU1000_AC97_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMA_ID_AC97C_TX, + .end = DMA_ID_AC97C_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMA_ID_AC97C_RX, + .end = DMA_ID_AC97C_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device alchemy_ac97c_dev = { + .name = "alchemy-ac97c", + .id = -1, + .resource = alchemy_ac97c_res, + .num_resources = ARRAY_SIZE(alchemy_ac97c_res), +}; + +static struct platform_device alchemy_ac97c_dma_dev = { + .name = "alchemy-pcm-dma", + .id = 0, +}; + +static struct platform_device db1x00_codec_dev = { + .name = "ac97-codec", + .id = -1, +}; + +static struct platform_device db1x00_audio_dev = { + .name = "db1000-audio", +}; + static int __init db1xxx_dev_init(void) { #ifdef DB1XXX_HAS_PCMCIA @@ -113,6 +155,12 @@ static int __init db1xxx_dev_init(void) 1); #endif db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED); + + platform_device_register(&db1x00_codec_dev); + platform_device_register(&alchemy_ac97c_dma_dev); + platform_device_register(&alchemy_ac97c_dev); + platform_device_register(&db1x00_audio_dev); + return 0; } device_initcall(db1xxx_dev_init); diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c index 03db3daadbd8..88c4babfdb5d 100644 --- a/arch/mips/ar7/irq.c +++ b/arch/mips/ar7/irq.c @@ -98,7 +98,8 @@ static struct irq_chip ar7_sec_irq_type = { static struct irqaction ar7_cascade_action = { .handler = no_action, - .name = "AR7 cascade interrupt" + .name = "AR7 cascade interrupt", + .flags = IRQF_NO_THREAD, }; static void __init ar7_irq_init(int base) diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig new file mode 100644 index 000000000000..6210b8d84109 --- /dev/null +++ b/arch/mips/bcm47xx/Kconfig @@ -0,0 +1,31 @@ +if BCM47XX + +config BCM47XX_SSB + bool "SSB Support for Broadcom BCM47XX" + select SYS_HAS_CPU_MIPS32_R1 + select SSB + select SSB_DRIVER_MIPS + select SSB_DRIVER_EXTIF + select SSB_EMBEDDED + select SSB_B43_PCI_BRIDGE if PCI + select SSB_PCICORE_HOSTMODE if PCI + default y + help + Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. + + This will generate an image with support for SSB and MIPS32 R1 instruction set. + +config BCM47XX_BCMA + bool "BCMA Support for Broadcom BCM47XX" + select SYS_HAS_CPU_MIPS32_R2 + select BCMA + select BCMA_HOST_SOC + select BCMA_DRIVER_MIPS + select BCMA_DRIVER_PCI_HOSTMODE if PCI + default y + help + Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. + + This will generate an image with support for BCMA and MIPS32 R2 instruction set. + +endif diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile index 7465e8a72d9a..4add17349ff9 100644 --- a/arch/mips/bcm47xx/Makefile +++ b/arch/mips/bcm47xx/Makefile @@ -3,4 +3,5 @@ # under Linux. # -obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o +obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o +obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c index e4a5ee9c9721..57b425fd4d41 100644 --- a/arch/mips/bcm47xx/gpio.c +++ b/arch/mips/bcm47xx/gpio.c @@ -20,42 +20,82 @@ static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES); int gpio_request(unsigned gpio, const char *tag) { - if (ssb_chipco_available(&ssb_bcm47xx.chipco) && - ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) - return -EINVAL; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) && + ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) + return -EINVAL; - if (ssb_extif_available(&ssb_bcm47xx.extif) && - ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) - return -EINVAL; + if (ssb_extif_available(&bcm47xx_bus.ssb.extif) && + ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) + return -EINVAL; - if (test_and_set_bit(gpio, gpio_in_use)) - return -EBUSY; + if (test_and_set_bit(gpio, gpio_in_use)) + return -EBUSY; - return 0; + return 0; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + if (gpio >= BCM47XX_CHIPCO_GPIO_LINES) + return -EINVAL; + + if (test_and_set_bit(gpio, gpio_in_use)) + return -EBUSY; + + return 0; +#endif + } + return -EINVAL; } EXPORT_SYMBOL(gpio_request); void gpio_free(unsigned gpio) { - if (ssb_chipco_available(&ssb_bcm47xx.chipco) && - ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) - return; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) && + ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) + return; + + if (ssb_extif_available(&bcm47xx_bus.ssb.extif) && + ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) + return; - if (ssb_extif_available(&ssb_bcm47xx.extif) && - ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) + clear_bit(gpio, gpio_in_use); return; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + if (gpio >= BCM47XX_CHIPCO_GPIO_LINES) + return; - clear_bit(gpio, gpio_in_use); + clear_bit(gpio, gpio_in_use); + return; +#endif + } } EXPORT_SYMBOL(gpio_free); int gpio_to_irq(unsigned gpio) { - if (ssb_chipco_available(&ssb_bcm47xx.chipco)) - return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2; - else if (ssb_extif_available(&ssb_bcm47xx.extif)) - return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2; - else - return -EINVAL; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco)) + return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2; + else if (ssb_extif_available(&bcm47xx_bus.ssb.extif)) + return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2; + else + return -EINVAL; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2; +#endif + } + return -EINVAL; } EXPORT_SYMBOL_GPL(gpio_to_irq); diff --git a/arch/mips/bcm47xx/irq.c b/arch/mips/bcm47xx/irq.c index 325757acd020..8cf3833b2d29 100644 --- a/arch/mips/bcm47xx/irq.c +++ b/arch/mips/bcm47xx/irq.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <asm/irq_cpu.h> +#include <bcm47xx.h> void plat_irq_dispatch(void) { @@ -51,5 +52,16 @@ void plat_irq_dispatch(void) void __init arch_init_irq(void) { +#ifdef CONFIG_BCM47XX_BCMA + if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) { + bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core, + BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31); + /* + * the kernel reads the timer irq from some register and thinks + * it's #5, but we offset it by 2 and route to #7 + */ + cp0_compare_irq = 7; + } +#endif mips_cpu_irq_init(); } diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c index 54db815bc86c..a84e3bb7387f 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/arch/mips/bcm47xx/nvram.c @@ -26,14 +26,35 @@ static char nvram_buf[NVRAM_SPACE]; /* Probe for NVRAM header */ static void early_nvram_init(void) { - struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; +#ifdef CONFIG_BCM47XX_SSB + struct ssb_mipscore *mcore_ssb; +#endif +#ifdef CONFIG_BCM47XX_BCMA + struct bcma_drv_cc *bcma_cc; +#endif struct nvram_header *header; int i; - u32 base, lim, off; + u32 base = 0; + u32 lim = 0; + u32 off; u32 *src, *dst; - base = mcore->flash_window; - lim = mcore->flash_window_size; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + mcore_ssb = &bcm47xx_bus.ssb.mipscore; + base = mcore_ssb->flash_window; + lim = mcore_ssb->flash_window_size; + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc; + base = bcma_cc->pflash.window; + lim = bcma_cc->pflash.window_size; + break; +#endif + } off = FLASH_MIN; while (off <= lim) { diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c index 59c11afdb2ab..57981e4fe2bc 100644 --- a/arch/mips/bcm47xx/serial.c +++ b/arch/mips/bcm47xx/serial.c @@ -23,10 +23,11 @@ static struct platform_device uart8250_device = { }, }; -static int __init uart8250_init(void) +#ifdef CONFIG_BCM47XX_SSB +static int __init uart8250_init_ssb(void) { int i; - struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore); + struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore); memset(&uart8250_data, 0, sizeof(uart8250_data)); @@ -44,6 +45,47 @@ static int __init uart8250_init(void) } return platform_device_register(&uart8250_device); } +#endif + +#ifdef CONFIG_BCM47XX_BCMA +static int __init uart8250_init_bcma(void) +{ + int i; + struct bcma_drv_cc *cc = &(bcm47xx_bus.bcma.bus.drv_cc); + + memset(&uart8250_data, 0, sizeof(uart8250_data)); + + for (i = 0; i < cc->nr_serial_ports; i++) { + struct plat_serial8250_port *p = &(uart8250_data[i]); + struct bcma_serial_port *bcma_port; + bcma_port = &(cc->serial_ports[i]); + + p->mapbase = (unsigned int) bcma_port->regs; + p->membase = (void *) bcma_port->regs; + p->irq = bcma_port->irq + 2; + p->uartclk = bcma_port->baud_base; + p->regshift = bcma_port->reg_shift; + p->iotype = UPIO_MEM; + p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + } + return platform_device_register(&uart8250_device); +} +#endif + +static int __init uart8250_init(void) +{ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + return uart8250_init_ssb(); +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + return uart8250_init_bcma(); +#endif + } + return -EINVAL; +} module_init(uart8250_init); diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index cfae81571ded..17c3d14d7c49 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -29,21 +29,36 @@ #include <linux/types.h> #include <linux/ssb/ssb.h> #include <linux/ssb/ssb_embedded.h> +#include <linux/bcma/bcma_soc.h> #include <asm/bootinfo.h> #include <asm/reboot.h> #include <asm/time.h> #include <bcm47xx.h> #include <asm/mach-bcm47xx/nvram.h> -struct ssb_bus ssb_bcm47xx; -EXPORT_SYMBOL(ssb_bcm47xx); +union bcm47xx_bus bcm47xx_bus; +EXPORT_SYMBOL(bcm47xx_bus); + +enum bcm47xx_bus_type bcm47xx_bus_type; +EXPORT_SYMBOL(bcm47xx_bus_type); static void bcm47xx_machine_restart(char *command) { printk(KERN_ALERT "Please stand by while rebooting the system...\n"); local_irq_disable(); /* Set the watchdog timer to reset immediately */ - ssb_watchdog_timer_set(&ssb_bcm47xx, 1); + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); + break; +#endif + } while (1) cpu_relax(); } @@ -52,11 +67,23 @@ static void bcm47xx_machine_halt(void) { /* Disable interrupts and watchdog and spin forever */ local_irq_disable(); - ssb_watchdog_timer_set(&ssb_bcm47xx, 0); + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); + break; +#endif + } while (1) cpu_relax(); } +#ifdef CONFIG_BCM47XX_SSB #define READ_FROM_NVRAM(_outvar, name, buf) \ if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\ sprom->_outvar = simple_strtoul(buf, NULL, 0); @@ -247,7 +274,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, return 0; } -void __init plat_mem_setup(void) +static void __init bcm47xx_register_ssb(void) { int err; char buf[100]; @@ -258,12 +285,12 @@ void __init plat_mem_setup(void) printk(KERN_WARNING "bcm47xx: someone else already registered" " a ssb SPROM callback handler (err %d)\n", err); - err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, + err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE, bcm47xx_get_invariants); if (err) panic("Failed to initialize SSB bus (err %d)\n", err); - mcore = &ssb_bcm47xx.mipscore; + mcore = &bcm47xx_bus.ssb.mipscore; if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { if (strstr(buf, "console=ttyS1")) { struct ssb_serial_port port; @@ -276,8 +303,57 @@ void __init plat_mem_setup(void) memcpy(&mcore->serial_ports[1], &port, sizeof(port)); } } +} +#endif + +#ifdef CONFIG_BCM47XX_BCMA +static void __init bcm47xx_register_bcma(void) +{ + int err; + + err = bcma_host_soc_register(&bcm47xx_bus.bcma); + if (err) + panic("Failed to initialize BCMA bus (err %d)\n", err); +} +#endif + +void __init plat_mem_setup(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + if (c->cputype == CPU_74K) { + printk(KERN_INFO "bcm47xx: using bcma bus\n"); +#ifdef CONFIG_BCM47XX_BCMA + bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; + bcm47xx_register_bcma(); +#endif + } else { + printk(KERN_INFO "bcm47xx: using ssb bus\n"); +#ifdef CONFIG_BCM47XX_SSB + bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; + bcm47xx_register_ssb(); +#endif + } _machine_restart = bcm47xx_machine_restart; _machine_halt = bcm47xx_machine_halt; pm_power_off = bcm47xx_machine_halt; } + +static int __init bcm47xx_register_bus_complete(void) +{ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + /* Nothing to do */ + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_bus_register(&bcm47xx_bus.bcma.bus); + break; +#endif + } + return 0; +} +device_initcall(bcm47xx_register_bus_complete); diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c index 0c6f47b3fd94..536374dcba78 100644 --- a/arch/mips/bcm47xx/time.c +++ b/arch/mips/bcm47xx/time.c @@ -30,7 +30,7 @@ void __init plat_time_init(void) { - unsigned long hz; + unsigned long hz = 0; /* * Use deterministic values for initial counter interrupt @@ -39,7 +39,19 @@ void __init plat_time_init(void) write_c0_count(0); write_c0_compare(0xffff); - hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2; + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2; + break; +#endif + } + if (!hz) hz = 100000000; diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c index 74d06965326f..e9f9ec8d443b 100644 --- a/arch/mips/bcm47xx/wgt634u.c +++ b/arch/mips/bcm47xx/wgt634u.c @@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int irq, void *ignored) /* Interrupts are shared, check if the current one is a GPIO interrupt. */ - if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco, + if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco, SSB_CHIPCO_IRQ_GPIO)) return IRQ_NONE; @@ -132,22 +132,26 @@ static int __init wgt634u_init(void) * machine. Use the MAC address as an heuristic. Netgear Inc. has * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx. */ + u8 *et0mac; - u8 *et0mac = ssb_bcm47xx.sprom.et0mac; + if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) + return -ENODEV; + + et0mac = bcm47xx_bus.ssb.sprom.et0mac; if (et0mac[0] == 0x00 && ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) || (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) { - struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; + struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore; printk(KERN_INFO "WGT634U machine detected.\n"); if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET), gpio_interrupt, IRQF_SHARED, - "WGT634U GPIO", &ssb_bcm47xx.chipco)) { + "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) { gpio_direction_input(WGT634U_GPIO_RESET); gpio_intmask(WGT634U_GPIO_RESET, 1); - ssb_chipco_irq_mask(&ssb_bcm47xx.chipco, + ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco, SSB_CHIPCO_IRQ_GPIO, SSB_CHIPCO_IRQ_GPIO); } diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index cea6021cb8d7..162e11b4ed75 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -222,6 +222,7 @@ static struct irq_chip bcm63xx_external_irq_chip = { static struct irqaction cpu_ip2_cascade_action = { .handler = no_action, .name = "cascade_ip2", + .flags = IRQF_NO_THREAD, }; void __init arch_init_irq(void) diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index cb9bf820fe53..965c777d3561 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -48,6 +48,7 @@ asmlinkage void plat_irq_dispatch(void) static struct irqaction cascade = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; void __init arch_init_irq(void) diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index fa45e924be05..f7b7ba6d5c45 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -101,20 +101,24 @@ int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU); static struct irqaction ioirq = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; static struct irqaction fpuirq = { .handler = no_action, .name = "fpu", + .flags = IRQF_NO_THREAD, }; static struct irqaction busirq = { .flags = IRQF_DISABLED, .name = "bus error", + .flags = IRQF_NO_THREAD, }; static struct irqaction haltirq = { .handler = dec_intr_halt, .name = "halt", + .flags = IRQF_NO_THREAD, }; diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c index 3dbd7a5a6ad3..7798887a1288 100644 --- a/arch/mips/emma/markeins/irq.c +++ b/arch/mips/emma/markeins/irq.c @@ -169,7 +169,7 @@ void emma2rh_gpio_irq_init(void) static struct irqaction irq_cascade = { .handler = no_action, - .flags = 0, + .flags = IRQF_NO_THREAD, .name = "cascade", .dev_id = NULL, .next = NULL, diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index dbc51065df5b..b77df0366ee6 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -111,7 +111,8 @@ struct compat_statfs { int f_bavail; compat_fsid_t f_fsid; int f_namelen; - int f_spare[6]; + int f_flags; + int f_spare[5]; }; #define COMPAT_RLIM_INFINITY 0x7fffffffUL diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h index a1ada1c27c16..e8ff70f80e13 100644 --- a/arch/mips/include/asm/lasat/lasat.h +++ b/arch/mips/include/asm/lasat/lasat.h @@ -41,10 +41,8 @@ enum lasat_mtdparts { /* * The format of the data record in the EEPROM. - * See Documentation/LASAT/eeprom.txt for a detailed description - * of the fields in this struct, and the LASAT Hardware Configuration - * field specification for a detailed description of the config - * field. + * See the LASAT Hardware Configuration field specification for a detailed + * description of the config field. */ #include <linux/types.h> diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h index d008f47a28bd..de95e0723e2b 100644 --- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h @@ -19,7 +19,29 @@ #ifndef __ASM_BCM47XX_H #define __ASM_BCM47XX_H -/* SSB bus */ -extern struct ssb_bus ssb_bcm47xx; +#include <linux/ssb/ssb.h> +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_soc.h> + +enum bcm47xx_bus_type { +#ifdef CONFIG_BCM47XX_SSB + BCM47XX_BUS_TYPE_SSB, +#endif +#ifdef CONFIG_BCM47XX_BCMA + BCM47XX_BUS_TYPE_BCMA, +#endif +}; + +union bcm47xx_bus { +#ifdef CONFIG_BCM47XX_SSB + struct ssb_bus ssb; +#endif +#ifdef CONFIG_BCM47XX_BCMA + struct bcma_soc bcma; +#endif +}; + +extern union bcm47xx_bus bcm47xx_bus; +extern enum bcm47xx_bus_type bcm47xx_bus_type; #endif /* __ASM_BCM47XX_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h index 98504142124e..76961cabeedf 100644 --- a/arch/mips/include/asm/mach-bcm47xx/gpio.h +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -10,6 +10,7 @@ #define __BCM47XX_GPIO_H #include <linux/ssb/ssb_embedded.h> +#include <linux/bcma/bcma.h> #include <asm/mach-bcm47xx/bcm47xx.h> #define BCM47XX_EXTIF_GPIO_LINES 5 @@ -21,41 +22,118 @@ extern int gpio_to_irq(unsigned gpio); static inline int gpio_get_value(unsigned gpio) { - return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio); + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio); +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, + 1 << gpio); +#endif + } + return -EINVAL; } static inline void gpio_set_value(unsigned gpio, int value) { - ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0); + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, + value ? 1 << gpio : 0); + return; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, + value ? 1 << gpio : 0); + return; +#endif + } } static inline int gpio_direction_input(unsigned gpio) { - ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0); - return 0; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0); + return 0; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, + 0); + return 0; +#endif + } + return -EINVAL; } static inline int gpio_direction_output(unsigned gpio, int value) { - /* first set the gpio out value */ - ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0); - /* then set the gpio mode */ - ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio); - return 0; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + /* first set the gpio out value */ + ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, + value ? 1 << gpio : 0); + /* then set the gpio mode */ + ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio); + return 0; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + /* first set the gpio out value */ + bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, + value ? 1 << gpio : 0); + /* then set the gpio mode */ + bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, + 1 << gpio); + return 0; +#endif + } + return -EINVAL; } static inline int gpio_intmask(unsigned gpio, int value) { - ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio, - value ? 1 << gpio : 0); - return 0; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio, + value ? 1 << gpio : 0); + return 0; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc, + 1 << gpio, value ? 1 << gpio : 0); + return 0; +#endif + } + return -EINVAL; } static inline int gpio_polarity(unsigned gpio, int value) { - ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio, - value ? 1 << gpio : 0); - return 0; + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio, + value ? 1 << gpio : 0); + return 0; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc, + 1 << gpio, value ? 1 << gpio : 0); + return 0; +#endif + } + return -EINVAL; } diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h index 0d5a42b5f47a..a58addb98cfd 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h @@ -54,7 +54,6 @@ #define cpu_has_mips_r2_exec_hazard 0 #define cpu_has_dsp 0 #define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 #define cpu_has_vint 0 #define cpu_has_veic 0 #define cpu_hwrena_impl_bits 0xc0000000 diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h index 62c094085947..35371641575d 100644 --- a/arch/mips/include/asm/mach-powertv/dma-coherence.h +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -13,7 +13,6 @@ #define __ASM_MACH_POWERTV_DMA_COHERENCE_H #include <linux/sched.h> -#include <linux/version.h> #include <linux/device.h> #include <asm/mach-powertv/asic.h> diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index b4ba2449444b..cb41af5f3406 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -195,9 +195,9 @@ * to cover the pipeline delay. */ .set mips32 - mfc0 v1, CP0_TCSTATUS + mfc0 k0, CP0_TCSTATUS .set mips0 - LONG_S v1, PT_TCSTATUS(sp) + LONG_S k0, PT_TCSTATUS(sp) #endif /* CONFIG_MIPS_MT_SMTC */ LONG_S $4, PT_R4(sp) LONG_S $5, PT_R5(sp) diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c index 73031f7fc827..4397972949fa 100644 --- a/arch/mips/jz4740/gpio.c +++ b/arch/mips/jz4740/gpio.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/spinlock.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/delay.h> @@ -86,7 +86,6 @@ struct jz_gpio_chip { spinlock_t lock; struct gpio_chip gpio_chip; - struct sys_device sysdev; }; static struct jz_gpio_chip jz4740_gpio_chips[]; @@ -459,49 +458,47 @@ static struct jz_gpio_chip jz4740_gpio_chips[] = { JZ4740_GPIO_CHIP(D), }; -static inline struct jz_gpio_chip *sysdev_to_chip(struct sys_device *dev) +static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip) { - return container_of(dev, struct jz_gpio_chip, sysdev); + chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK); + writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET); + writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR); } -static int jz4740_gpio_suspend(struct sys_device *dev, pm_message_t state) +static int jz4740_gpio_suspend(void) { - struct jz_gpio_chip *chip = sysdev_to_chip(dev); + int i; - chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK); - writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET); - writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR); + for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++) + jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]); return 0; } -static int jz4740_gpio_resume(struct sys_device *dev) +static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip) { - struct jz_gpio_chip *chip = sysdev_to_chip(dev); uint32_t mask = chip->suspend_mask; writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR); writel(mask, chip->base + JZ_REG_GPIO_MASK_SET); +} - return 0; +static void jz4740_gpio_resume(void) +{ + int i; + + for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--) + jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]); } -static struct sysdev_class jz4740_gpio_sysdev_class = { - .name = "gpio", +static struct syscore_ops jz4740_gpio_syscore_ops = { .suspend = jz4740_gpio_suspend, .resume = jz4740_gpio_resume, }; -static int jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) +static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) { - int ret, irq; - - chip->sysdev.id = id; - chip->sysdev.cls = &jz4740_gpio_sysdev_class; - ret = sysdev_register(&chip->sysdev); - - if (ret) - return ret; + int irq; spin_lock_init(&chip->lock); @@ -519,22 +516,17 @@ static int jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) irq_set_chip_and_handler(irq, &jz_gpio_irq_chip, handle_level_irq); } - - return 0; } static int __init jz4740_gpio_init(void) { unsigned int i; - int ret; - - ret = sysdev_class_register(&jz4740_gpio_sysdev_class); - if (ret) - return ret; for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i) jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i); + register_syscore_ops(&jz4740_gpio_syscore_ops); + printk(KERN_INFO "JZ4740 GPIO initialized\n"); return 0; diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index feb8021a305f..6a2d758dd8e9 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -19,6 +19,26 @@ #include <asm-generic/sections.h> +#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT) +#define MCOUNT_OFFSET_INSNS 5 +#else +#define MCOUNT_OFFSET_INSNS 4 +#endif + +/* + * Check if the address is in kernel space + * + * Clone core_kernel_text() from kernel/extable.c, but doesn't call + * init_kernel_text() for Ftrace doesn't trace functions in init sections. + */ +static inline int in_kernel_space(unsigned long ip) +{ + if (ip >= (unsigned long)_stext && + ip <= (unsigned long)_etext) + return 1; + return 0; +} + #ifdef CONFIG_DYNAMIC_FTRACE #define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ @@ -54,20 +74,6 @@ static inline void ftrace_dyn_arch_init_insns(void) #endif } -/* - * Check if the address is in kernel space - * - * Clone core_kernel_text() from kernel/extable.c, but doesn't call - * init_kernel_text() for Ftrace doesn't trace functions in init sections. - */ -static inline int in_kernel_space(unsigned long ip) -{ - if (ip >= (unsigned long)_stext && - ip <= (unsigned long)_etext) - return 1; - return 0; -} - static int ftrace_modify_code(unsigned long ip, unsigned int new_code) { int faulted; @@ -112,11 +118,6 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code) * 1: offset = 4 instructions */ -#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT) -#define MCOUNT_OFFSET_INSNS 5 -#else -#define MCOUNT_OFFSET_INSNS 4 -#endif #define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS) int ftrace_make_nop(struct module *mod, diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 5c74eb797f08..32b397b646ee 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -229,7 +229,7 @@ static void i8259A_shutdown(void) */ if (i8259A_auto_eoi >= 0) { outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ } } @@ -295,6 +295,7 @@ static void init_8259A(int auto_eoi) static struct irqaction irq2 = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; static struct resource pic1_io_resource = { diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 876a75cc376f..922a554cd108 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -349,3 +349,10 @@ SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags, return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4), dfd, pathname); } + +SYSCALL_DEFINE6(32_futex, u32 __user *, uaddr, int, op, u32, val, + struct compat_timespec __user *, utime, u32 __user *, uaddr2, + u32, val3) +{ + return compat_sys_futex(uaddr, op, val, utime, uaddr2, val3); +} diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index e521420a45a5..865bc7a6f5a1 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -424,7 +424,7 @@ einval: li v0, -ENOSYS sys sys_getresuid 3 sys sys_ni_syscall 0 /* was sys_query_module */ sys sys_poll 3 - sys sys_nfsservctl 3 + sys sys_ni_syscall 0 /* was nfsservctl */ sys sys_setresgid 3 /* 4190 */ sys sys_getresgid 3 sys sys_prctl 5 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 85874d6a8a70..fb7334bea731 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -299,7 +299,7 @@ sys_call_table: PTR sys_ni_syscall /* 5170, was get_kernel_syms */ PTR sys_ni_syscall /* was query_module */ PTR sys_quotactl - PTR sys_nfsservctl + PTR sys_ni_syscall /* was nfsservctl */ PTR sys_ni_syscall /* res. for getpmsg */ PTR sys_ni_syscall /* 5175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index b85842fc87ae..6de1f598346e 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -294,7 +294,7 @@ EXPORT(sysn32_call_table) PTR sys_ni_syscall /* 6170, was get_kernel_syms */ PTR sys_ni_syscall /* was query_module */ PTR sys_quotactl - PTR compat_sys_nfsservctl + PTR sys_ni_syscall /* was nfsservctl */ PTR sys_ni_syscall /* res. for getpmsg */ PTR sys_ni_syscall /* 6175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ @@ -315,7 +315,7 @@ EXPORT(sysn32_call_table) PTR sys_fremovexattr PTR sys_tkill PTR sys_ni_syscall - PTR compat_sys_futex + PTR sys_32_futex PTR compat_sys_sched_setaffinity /* 6195 */ PTR compat_sys_sched_getaffinity PTR sys_cacheflush diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 46c4763edf21..1d813169e453 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -392,7 +392,7 @@ sys_call_table: PTR sys_getresuid PTR sys_ni_syscall /* was query_module */ PTR sys_poll - PTR compat_sys_nfsservctl + PTR sys_ni_syscall /* was nfsservctl */ PTR sys_setresgid /* 4190 */ PTR sys_getresgid PTR sys_prctl @@ -441,7 +441,7 @@ sys_call_table: PTR sys_fremovexattr /* 4235 */ PTR sys_tkill PTR sys_sendfile64 - PTR compat_sys_futex + PTR sys_32_futex PTR compat_sys_sched_setaffinity PTR compat_sys_sched_getaffinity /* 4240 */ PTR compat_sys_io_setup diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index dbbe0ce48d89..f8524003676a 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -8,6 +8,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include <linux/cache.h> +#include <linux/irqflags.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/personality.h> @@ -658,6 +659,8 @@ static void do_signal(struct pt_regs *regs) asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { + local_irq_enable(); + /* deal with pending signal delivery */ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) do_signal(regs); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b7517e3abc85..cbea618af0b4 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -14,6 +14,7 @@ #include <linux/bug.h> #include <linux/compiler.h> #include <linux/init.h> +#include <linux/kernel.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/sched.h> @@ -364,21 +365,26 @@ static int regs_to_trapnr(struct pt_regs *regs) return (regs->cp0_cause >> 2) & 0x1f; } -static DEFINE_SPINLOCK(die_lock); +static DEFINE_RAW_SPINLOCK(die_lock); void __noreturn die(const char *str, struct pt_regs *regs) { static int die_counter; int sig = SIGSEGV; #ifdef CONFIG_MIPS_MT_SMTC - unsigned long dvpret = dvpe(); + unsigned long dvpret; #endif /* CONFIG_MIPS_MT_SMTC */ + oops_enter(); + if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) sig = 0; console_verbose(); - spin_lock_irq(&die_lock); + raw_spin_lock_irq(&die_lock); +#ifdef CONFIG_MIPS_MT_SMTC + dvpret = dvpe(); +#endif /* CONFIG_MIPS_MT_SMTC */ bust_spinlocks(1); #ifdef CONFIG_MIPS_MT_SMTC mips_mt_regdump(dvpret); @@ -387,7 +393,9 @@ void __noreturn die(const char *str, struct pt_regs *regs) printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); - spin_unlock_irq(&die_lock); + raw_spin_unlock_irq(&die_lock); + + oops_exit(); if (in_interrupt()) panic("Fatal exception in interrupt"); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 2cd50ad0d5c6..3efcb065f78a 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -192,7 +192,7 @@ static struct tc *get_tc(int index) } spin_unlock(&vpecontrol.tc_list_lock); - return NULL; + return res; } /* allocate a vpe and associate it with this minor (or index) */ diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index fc89795cafdb..f9737bb3c5ab 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -123,11 +123,10 @@ void ltq_enable_irq(struct irq_data *d) static unsigned int ltq_startup_eiu_irq(struct irq_data *d) { int i; - int irq_nr = d->irq - INT_NUM_IRQ0; ltq_enable_irq(d); for (i = 0; i < MAX_EIU; i++) { - if (irq_nr == ltq_eiu_irq[i]) { + if (d->irq == ltq_eiu_irq[i]) { /* low level - we should really handle set_type */ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | (0x6 << (i * 4)), LTQ_EIU_EXIN_C); @@ -147,11 +146,10 @@ static unsigned int ltq_startup_eiu_irq(struct irq_data *d) static void ltq_shutdown_eiu_irq(struct irq_data *d) { int i; - int irq_nr = d->irq - INT_NUM_IRQ0; ltq_disable_irq(d); for (i = 0; i < MAX_EIU; i++) { - if (irq_nr == ltq_eiu_irq[i]) { + if (d->irq == ltq_eiu_irq[i]) { /* disable */ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i), LTQ_EIU_EXIN_INEN); diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c index 66eb52fa50a1..033b3184c7a7 100644 --- a/arch/mips/lantiq/xway/ebu.c +++ b/arch/mips/lantiq/xway/ebu.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/ioport.h> #include <lantiq_soc.h> diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c index 9d69f01e352b..39f0d2641cbf 100644 --- a/arch/mips/lantiq/xway/pmu.c +++ b/arch/mips/lantiq/xway/pmu.c @@ -8,7 +8,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/ioport.h> #include <lantiq_soc.h> diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index de4c165515d7..d608b6ef0edd 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -105,6 +105,7 @@ asmlinkage void plat_irq_dispatch(void) static struct irqaction cascade = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; void __init arch_init_irq(void) diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c index d61a04222b87..3cf1fef29f0e 100644 --- a/arch/mips/loongson/fuloong-2e/irq.c +++ b/arch/mips/loongson/fuloong-2e/irq.c @@ -42,6 +42,7 @@ asmlinkage void mach_irq_dispatch(unsigned int pending) static struct irqaction cascade_irqaction = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; void __init mach_init_irq(void) diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 081db102bb98..14b081841b6b 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -96,12 +96,13 @@ static irqreturn_t ip6_action(int cpl, void *dev_id) struct irqaction ip6_irqaction = { .handler = ip6_action, .name = "cascade", - .flags = IRQF_SHARED, + .flags = IRQF_SHARED | IRQF_NO_THREAD, }; struct irqaction cascade_irqaction = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; void __init mach_init_irq(void) diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c index 9ff5d0fac556..302d779d5b0d 100644 --- a/arch/mips/mm/mmap.c +++ b/arch/mips/mm/mmap.c @@ -6,6 +6,7 @@ * Copyright (C) 2011 Wind River Systems, * written by Ralf Baechle <ralf@linux-mips.org> */ +#include <linux/compiler.h> #include <linux/errno.h> #include <linux/mm.h> #include <linux/mman.h> @@ -15,12 +16,11 @@ #include <linux/sched.h> unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ - EXPORT_SYMBOL(shm_align_mask); /* gap between mmap and stack */ #define MIN_GAP (128*1024*1024UL) -#define MAX_GAP ((TASK_SIZE)/6*5) +#define MAX_GAP ((TASK_SIZE)/6*5) static int mmap_is_legacy(void) { @@ -57,13 +57,13 @@ static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, return base - off; } -#define COLOUR_ALIGN(addr,pgoff) \ +#define COLOUR_ALIGN(addr, pgoff) \ ((((addr) + shm_align_mask) & ~shm_align_mask) + \ (((pgoff) << PAGE_SHIFT) & shm_align_mask)) enum mmap_allocation_direction {UP, DOWN}; -static unsigned long arch_get_unmapped_area_foo(struct file *filp, +static unsigned long arch_get_unmapped_area_common(struct file *filp, unsigned long addr0, unsigned long len, unsigned long pgoff, unsigned long flags, enum mmap_allocation_direction dir) { @@ -103,16 +103,16 @@ static unsigned long arch_get_unmapped_area_foo(struct file *filp, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vma->vm_start)) return addr; } if (dir == UP) { addr = mm->mmap_base; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) { /* At this point: (!vma || addr < vma->vm_end). */ @@ -131,28 +131,30 @@ static unsigned long arch_get_unmapped_area_foo(struct file *filp, mm->free_area_cache = mm->mmap_base; } - /* either no address requested or can't fit in requested address hole */ + /* + * either no address requested, or the mapping can't fit into + * the requested address hole + */ addr = mm->free_area_cache; - if (do_color_align) { - unsigned long base = - COLOUR_ALIGN_DOWN(addr - len, pgoff); - + if (do_color_align) { + unsigned long base = + COLOUR_ALIGN_DOWN(addr - len, pgoff); addr = base + len; - } + } /* make sure it can fit in the remaining address space */ if (likely(addr > len)) { vma = find_vma(mm, addr - len); if (!vma || addr <= vma->vm_start) { - /* remember the address as a hint for next time */ - return mm->free_area_cache = addr-len; + /* cache the address as a hint for next time */ + return mm->free_area_cache = addr - len; } } if (unlikely(mm->mmap_base < len)) goto bottomup; - addr = mm->mmap_base-len; + addr = mm->mmap_base - len; if (do_color_align) addr = COLOUR_ALIGN_DOWN(addr, pgoff); @@ -163,8 +165,8 @@ static unsigned long arch_get_unmapped_area_foo(struct file *filp, * return with success: */ vma = find_vma(mm, addr); - if (likely(!vma || addr+len <= vma->vm_start)) { - /* remember the address as a hint for next time */ + if (likely(!vma || addr + len <= vma->vm_start)) { + /* cache the address as a hint for next time */ return mm->free_area_cache = addr; } @@ -173,7 +175,7 @@ static unsigned long arch_get_unmapped_area_foo(struct file *filp, mm->cached_hole_size = vma->vm_start - addr; /* try just below the current vma->vm_start */ - addr = vma->vm_start-len; + addr = vma->vm_start - len; if (do_color_align) addr = COLOUR_ALIGN_DOWN(addr, pgoff); } while (likely(len < vma->vm_start)); @@ -201,7 +203,7 @@ bottomup: unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr0, unsigned long len, unsigned long pgoff, unsigned long flags) { - return arch_get_unmapped_area_foo(filp, + return arch_get_unmapped_area_common(filp, addr0, len, pgoff, flags, UP); } @@ -213,7 +215,7 @@ unsigned long arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr0, unsigned long len, unsigned long pgoff, unsigned long flags) { - return arch_get_unmapped_area_foo(filp, + return arch_get_unmapped_area_common(filp, addr0, len, pgoff, flags, DOWN); } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index b6e1cff50667..e06370f58ef3 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -1759,14 +1759,13 @@ static void __cpuinit build_r3000_tlb_modify_handler(void) u32 *p = handle_tlbm; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; - struct work_registers wr; memset(handle_tlbm, 0, sizeof(handle_tlbm)); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); build_r3000_tlbchange_handler_head(&p, K0, K1); - build_pte_modifiable(&p, &r, wr.r1, wr.r2, wr.r3, label_nopage_tlbm); + build_pte_modifiable(&p, &r, K0, K1, -1, label_nopage_tlbm); uasm_i_nop(&p); /* load delay */ build_make_write(&p, &r, K0, K1); build_r3000_pte_reload_tlbwi(&p, K0, K1); @@ -1963,7 +1962,8 @@ static void __cpuinit build_r4000_tlb_load_handler(void) uasm_i_andi(&p, wr.r3, wr.r3, 2); uasm_il_beqz(&p, &r, wr.r3, label_tlbl_goaround2); } - + if (PM_DEFAULT_MASK == 0) + uasm_i_nop(&p); /* * We clobbered C0_PAGEMASK, restore it. On the other branch * it is restored in build_huge_tlb_write_entry. diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 1d36c511a7a5..d53ff91b277c 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -350,12 +350,14 @@ unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) static struct irqaction i8259irq = { .handler = no_action, - .name = "XT-PIC cascade" + .name = "XT-PIC cascade", + .flags = IRQF_NO_THREAD, }; static struct irqaction corehi_irqaction = { .handler = no_action, - .name = "CoreHi" + .name = "CoreHi", + .flags = IRQF_NO_THREAD, }; static msc_irqmap_t __initdata msc_irqmap[] = { diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile index 9bd3f731f62e..2dca585dd2f7 100644 --- a/arch/mips/netlogic/xlr/Makefile +++ b/arch/mips/netlogic/xlr/Makefile @@ -2,4 +2,4 @@ obj-y += setup.o platform.o irq.o setup.o time.o obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o -EXTRA_CFLAGS += -Werror +ccflags-y += -Werror diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c index 455f8e50a007..400535a955d0 100644 --- a/arch/mips/pci/pci-bcm47xx.c +++ b/arch/mips/pci/pci-bcm47xx.c @@ -25,6 +25,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/ssb/ssb.h> +#include <bcm47xx.h> int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) int pcibios_plat_dev_init(struct pci_dev *dev) { +#ifdef CONFIG_BCM47XX_SSB int res; u8 slot, pin; + if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) + return 0; + res = ssb_pcibios_plat_dev_init(dev); if (res < 0) { printk(KERN_ALERT "PCI: Failed to init device %s\n", @@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev *dev) } dev->irq = res; +#endif return 0; } diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 603d7493e966..8656388b34bd 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -171,8 +171,13 @@ static int __devinit ltq_pci_startup(struct ltq_pci_data *conf) u32 temp_buffer; /* set clock to 33Mhz */ - ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR); - ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR); + if (ltq_is_ar9()) { + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0x1f00000, LTQ_CGU_IFCCR); + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0xe00000, LTQ_CGU_IFCCR); + } else { + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR); + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR); + } /* external or internal clock ? */ if (conf->clock) { diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index 764362ce5e40..5f3a69cebad1 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -215,7 +215,7 @@ static int __init rc32434_pci_init(void) rc32434_pcibridge_init(); io_map_base = ioremap(rc32434_res_pci_io1.start, - resource_size(&rcrc32434_res_pci_io1)); + resource_size(&rc32434_res_pci_io1)); if (!io_map_base) return -ENOMEM; diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmc-sierra/msp71xx/msp_irq.c index 4531c4a514bc..d3c3d81757a5 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq.c @@ -108,12 +108,14 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) static struct irqaction cic_cascade_msp = { .handler = no_action, - .name = "MSP CIC cascade" + .name = "MSP CIC cascade", + .flags = IRQF_NO_THREAD, }; static struct irqaction per_cascade_msp = { .handler = no_action, - .name = "MSP PER cascade" + .name = "MSP PER cascade", + .flags = IRQF_NO_THREAD, }; void __init arch_init_irq(void) diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c index f7261628d8a6..a1c7c7da2336 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c @@ -27,6 +27,7 @@ #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> +#include <linux/slab.h> #include <asm/bootinfo.h> #include <asm/io.h> @@ -38,6 +39,55 @@ #include <msp_int.h> #include <msp_regs.h> +struct msp_uart_data { + int last_lcr; +}; + +static void msp_serial_out(struct uart_port *p, int offset, int value) +{ + struct msp_uart_data *d = p->private_data; + + if (offset == UART_LCR) + d->last_lcr = value; + + offset <<= p->regshift; + writeb(value, p->membase + offset); +} + +static unsigned int msp_serial_in(struct uart_port *p, int offset) +{ + offset <<= p->regshift; + + return readb(p->membase + offset); +} + +static int msp_serial_handle_irq(struct uart_port *p) +{ + struct msp_uart_data *d = p->private_data; + unsigned int iir = readb(p->membase + (UART_IIR << p->regshift)); + + if (serial8250_handle_irq(p, iir)) { + return 1; + } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* + * The DesignWare APB UART has an Busy Detect (0x07) interrupt + * meaning an LCR write attempt occurred while the UART was + * busy. The interrupt must be cleared by reading the UART + * status register (USR) and the LCR re-written. + * + * Note: MSP reserves 0x20 bytes of address space for the UART + * and the USR is mapped in a separate block at an offset of + * 0xc0 from the start of the UART. + */ + (void)readb(p->membase + 0xc0); + writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift)); + + return 1; + } + + return 0; +} + void __init msp_serial_setup(void) { char *s; @@ -59,13 +109,22 @@ void __init msp_serial_setup(void) up.irq = MSP_INT_UART0; up.uartclk = uartclk; up.regshift = 2; - up.iotype = UPIO_DWAPB; /* UPIO_MEM like */ + up.iotype = UPIO_MEM; up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; up.type = PORT_16550A; up.line = 0; - up.private_data = (void*)UART0_STATUS_REG; - if (early_serial_setup(&up)) - printk(KERN_ERR "Early serial init of port 0 failed\n"); + up.serial_out = msp_serial_out; + up.serial_in = msp_serial_in; + up.handle_irq = msp_serial_handle_irq; + up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL); + if (!up.private_data) { + pr_err("failed to allocate uart private data\n"); + return; + } + if (early_serial_setup(&up)) { + kfree(up.private_data); + pr_err("Early serial init of port 0 failed\n"); + } /* Initialize the second serial port, if one exists */ switch (mips_machtype) { @@ -88,6 +147,8 @@ void __init msp_serial_setup(void) up.irq = MSP_INT_UART1; up.line = 1; up.private_data = (void*)UART1_STATUS_REG; - if (early_serial_setup(&up)) - printk(KERN_ERR "Early serial init of port 1 failed\n"); + if (early_serial_setup(&up)) { + kfree(up.private_data); + pr_err("Early serial init of port 1 failed\n"); + } } diff --git a/arch/mips/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c index 6b93c81779c1..1ebe22bdadc8 100644 --- a/arch/mips/pnx8550/common/int.c +++ b/arch/mips/pnx8550/common/int.c @@ -167,7 +167,7 @@ static struct irq_chip level_irq_type = { static struct irqaction gic_action = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_NO_THREAD, .name = "GIC", }; diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index b4d08e4d2ea9..f72c336ea27b 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -155,32 +155,32 @@ static void __irq_entry indy_buserror_irq(void) static struct irqaction local0_cascade = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_NO_THREAD, .name = "local0 cascade", }; static struct irqaction local1_cascade = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_NO_THREAD, .name = "local1 cascade", }; static struct irqaction buserr = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_NO_THREAD, .name = "Bus Error", }; static struct irqaction map0_cascade = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_NO_THREAD, .name = "mapable0 cascade", }; #ifdef USE_LIO3_IRQ static struct irqaction map1_cascade = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_NO_THREAD, .name = "mapable1 cascade", }; #define SGI_INTERRUPTS SGINT_END diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index a7e5a6d917b1..3ab5b5d25b0a 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -359,6 +359,7 @@ void sni_rm200_init_8259A(void) static struct irqaction sni_rm200_irq2 = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; static struct resource sni_rm200_pic1_resource = { diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index e9f95dcde379..ba3cec3155df 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -321,7 +321,7 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask) static u32 tx4939_get_eth_speed(struct net_device *dev) { struct ethtool_cmd cmd; - if (dev_ethtool_get_settings(dev, &cmd)) + if (__ethtool_get_settings(dev, &cmd)) return 100; /* default 100Mbps */ return ethtool_cmd_speed(&cmd); diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 70a3b85f3757..fad2bef432cd 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -34,6 +34,7 @@ static irq_cascade_t irq_cascade[NR_IRQS] __cacheline_aligned; static struct irqaction cascade_irqaction = { .handler = no_action, .name = "cascade", + .flags = IRQF_NO_THREAD, }; int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int)) diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 1f870340ebdd..438db84a1f7c 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -47,9 +47,6 @@ config GENERIC_CMOS_UPDATE config GENERIC_HWEIGHT def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS def_bool y @@ -195,7 +192,7 @@ config SMP singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. - See also <file:Documentation/i386/IO-APIC.txt>, + See also <file:Documentation/x86/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index ae435e1d5669..3e3620d9fc45 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -589,7 +589,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2623d19f4f4c..2381df83bd00 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -260,7 +260,6 @@ void set_intr_level(int irq, u16 level) /* * mark an interrupt to be ACK'd after interrupt handlers have been run rather * than before - * - see Documentation/mn10300/features.txt */ void mn10300_set_lateack_irq_type(int irq) { diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 4558bafbd1a2..9460e1c266dd 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -1,6 +1,6 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. # config OPENRISC diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h index 052f877b52a5..b206ba4608b2 100644 --- a/arch/openrisc/include/asm/dma-mapping.h +++ b/arch/openrisc/include/asm/dma-mapping.h @@ -18,7 +18,7 @@ #define __ASM_OPENRISC_DMA_MAPPING_H /* - * See Documentation/PCI/PCI-DMA-mapping.txt and + * See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. * * This file is written with the intention of eventually moving over @@ -31,7 +31,6 @@ #define DMA_ERROR_CODE (~(dma_addr_t)0x0) -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) @@ -47,6 +46,12 @@ dma_addr_t or1k_map_page(struct device *dev, struct page *page, void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs); +int or1k_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); +void or1k_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); void or1k_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir); @@ -98,6 +103,51 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, debug_dma_unmap_page(dev, addr, size, dir, true); } +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + int i, ents; + struct scatterlist *s; + + for_each_sg(sg, s, nents, i) + kmemcheck_mark_initialized(sg_virt(s), s->length); + BUG_ON(!valid_dma_direction(dir)); + ents = or1k_map_sg(dev, sg, nents, dir, NULL); + debug_dma_map_sg(dev, sg, nents, ents, dir); + + return ents; +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); + debug_dma_unmap_sg(dev, sg, nents, dir); + or1k_unmap_sg(dev, sg, nents, dir, NULL); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t addr; + + kmemcheck_mark_initialized(page_address(page) + offset, size); + BUG_ON(!valid_dma_direction(dir)); + addr = or1k_map_page(dev, page, offset, size, dir, NULL); + debug_dma_map_page(dev, page, offset, size, dir, addr, false); + + return addr; +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); + or1k_unmap_page(dev, addr, size, dir, NULL); + debug_dma_unmap_page(dev, addr, size, dir, true); +} + static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) @@ -119,7 +169,12 @@ static inline void dma_sync_single_for_device(struct device *dev, static inline int dma_supported(struct device *dev, u64 dma_mask) { /* Support 32 bit DMA mask exclusively */ - return dma_mask == 0xffffffffULL; + return dma_mask == DMA_BIT_MASK(32); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; } static inline int dma_set_mask(struct device *dev, u64 dma_mask) diff --git a/arch/openrisc/include/asm/sigcontext.h b/arch/openrisc/include/asm/sigcontext.h index 54a5c50132e3..b79c2b19afbe 100644 --- a/arch/openrisc/include/asm/sigcontext.h +++ b/arch/openrisc/include/asm/sigcontext.h @@ -23,16 +23,11 @@ /* This struct is saved by setup_frame in signal.c, to keep the current context while a signal handler is executed. It's restored by sys_sigreturn. - - To keep things simple, we use pt_regs here even though normally you just - specify the list of regs to save. Then we can use copy_from_user on the - entire regs instead of a bunch of get_user's as well... */ struct sigcontext { - struct pt_regs regs; /* needs to be first */ + struct user_regs_struct regs; /* needs to be first */ unsigned long oldmask; - unsigned long usp; /* usp before stacking this gunk on it */ }; #endif /* __ASM_OPENRISC_SIGCONTEXT_H */ diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c index 968d3ee477e3..f1c8ee2895d0 100644 --- a/arch/openrisc/kernel/dma.c +++ b/arch/openrisc/kernel/dma.c @@ -154,6 +154,33 @@ void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, /* Nothing special to do here... */ } +int or1k_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nents, i) { + s->dma_address = or1k_map_page(dev, sg_page(s), s->offset, + s->length, dir, NULL); + } + + return nents; +} + +void or1k_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nents, i) { + or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, NULL); + } +} + void or1k_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) @@ -187,5 +214,4 @@ static int __init dma_init(void) return 0; } - fs_initcall(dma_init); diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c index 5f759c76834e..95207ab0c99e 100644 --- a/arch/openrisc/kernel/signal.c +++ b/arch/openrisc/kernel/signal.c @@ -52,31 +52,25 @@ struct rt_sigframe { static int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc) { unsigned int err = 0; - unsigned long old_usp; /* Alwys make any pending restarted system call return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; - /* restore the regs from &sc->regs (same as sc, since regs is first) + /* + * Restore the regs from &sc->regs. * (sc is already checked for VERIFY_READ since the sigframe was * checked in sys_sigreturn previously) */ - - if (__copy_from_user(regs, sc, sizeof(struct pt_regs))) + if (__copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long))) + goto badframe; + if (__copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long))) + goto badframe; + if (__copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long))) goto badframe; /* make sure the SM-bit is cleared so user-mode cannot fool us */ regs->sr &= ~SPR_SR_SM; - /* restore the old USP as it was before we stacked the sc etc. - * (we cannot just pop the sigcontext since we aligned the sp and - * stuff after pushing it) - */ - - err |= __get_user(old_usp, &sc->usp); - - regs->sp = old_usp; - /* TODO: the other ports use regs->orig_XX to disable syscall checks * after this completes, but we don't use that mechanism. maybe we can * use it now ? @@ -137,18 +131,17 @@ static int setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, unsigned long mask) { int err = 0; - unsigned long usp = regs->sp; - /* copy the regs. they are first in sc so we can use sc directly */ + /* copy the regs */ - err |= __copy_to_user(sc, regs, sizeof(struct pt_regs)); + err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long)); /* then some other stuff */ err |= __put_user(mask, &sc->oldmask); - err |= __put_user(usp, &sc->usp); - return err; } diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index e077b0bf56ca..fdfd8be29e95 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -169,9 +169,7 @@ config 64BIT choice prompt "Kernel page size" - default PARISC_PAGE_SIZE_4KB if !64BIT - default PARISC_PAGE_SIZE_4KB if 64BIT -# default PARISC_PAGE_SIZE_16KB if 64BIT + default PARISC_PAGE_SIZE_4KB config PARISC_PAGE_SIZE_4KB bool "4KB" diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h index efa0b60c63fe..760f331d4fa3 100644 --- a/arch/parisc/include/asm/compat.h +++ b/arch/parisc/include/asm/compat.h @@ -105,7 +105,8 @@ struct compat_statfs { __kernel_fsid_t f_fsid; s32 f_namelen; s32 f_frsize; - s32 f_spare[5]; + s32 f_flags; + s32 f_spare[4]; }; struct compat_sigcontext { diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 890531e32fe8..467bbd510eac 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include <asm/cacheflush.h> #include <asm/scatterlist.h> -/* See Documentation/PCI/PCI-DMA-mapping.txt */ +/* See Documentation/DMA-API-HOWTO.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index a029f74a3c5c..d047edea2504 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -2,7 +2,7 @@ ** PARISC 1.1 Dynamic DMA mapping support. ** This implementation is for PA-RISC platforms that do not support ** I/O TLBs (aka DMA address translation hardware). -** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions. +** See Documentation/DMA-API-HOWTO.txt for interface definitions. ** ** (c) Copyright 1999,2000 Hewlett-Packard Company ** (c) Copyright 2000 Grant Grundler diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index e66366fd2abc..3735abd7f8f6 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -259,7 +259,7 @@ ENTRY_SAME(ni_syscall) /* query_module */ ENTRY_SAME(poll) /* structs contain pointers and an in_addr... */ - ENTRY_COMP(nfsservctl) + ENTRY_SAME(ni_syscall) /* was nfsservctl */ ENTRY_SAME(setresgid) /* 170 */ ENTRY_SAME(getresgid) ENTRY_SAME(prctl) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 6926b61acfea..47682b67fd36 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -656,6 +656,8 @@ config SBUS config FSL_SOC bool + select HAVE_CAN_FLEXCAN if NET && CAN + select PPC_CLOCK if CAN_FLEXCAN config FSL_PCI bool diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts index 6b33b73a5ba0..d6c669c888e9 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ b/arch/powerpc/boot/dts/p1010rdb.dts @@ -23,6 +23,8 @@ ethernet2 = &enet2; pci0 = &pci0; pci1 = &pci1; + can0 = &can0; + can1 = &can1; }; memory { @@ -169,14 +171,6 @@ }; }; - can0@1c000 { - fsl,flexcan-clock-source = "platform"; - }; - - can1@1d000 { - fsl,flexcan-clock-source = "platform"; - }; - usb@22000 { phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi index 7f51104f2e36..cabe0a453ae6 100644 --- a/arch/powerpc/boot/dts/p1010si.dtsi +++ b/arch/powerpc/boot/dts/p1010si.dtsi @@ -140,20 +140,18 @@ interrupt-parent = <&mpic>; }; - can0@1c000 { - compatible = "fsl,flexcan-v1.0"; + can0: can@1c000 { + compatible = "fsl,p1010-flexcan"; reg = <0x1c000 0x1000>; interrupts = <48 0x2>; interrupt-parent = <&mpic>; - fsl,flexcan-clock-divider = <2>; }; - can1@1d000 { - compatible = "fsl,flexcan-v1.0"; + can1: can@1d000 { + compatible = "fsl,p1010-flexcan"; reg = <0x1d000 0x1000>; interrupts = <61 0x2>; interrupt-parent = <&mpic>; - fsl,flexcan-clock-divider = <2>; }; L2: l2-cache-controller@20000 { diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index bfa96aa8f2ca..d9b776740a67 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -387,7 +387,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; - bank-width = <1>; + bank-width = <2>; device-width = <1>; partition@0 { label = "ramdisk"; diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 4182c772340b..ed3bab72a834 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -44,12 +44,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y CONFIG_MII=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 -CONFIG_IBM_NEW_EMAC_DEBUG=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 +CONFIG_IBM_EMAC_DEBUG=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index 2dbb293163f5..17582a3420fb 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -42,8 +42,9 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig index ebeb4accad65..dba263c1d3a2 100644 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -43,8 +43,9 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 532ea9d93a15..f2d4be936e08 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -51,10 +51,11 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 3c142ac1b344..42b979355f9b 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -43,10 +43,11 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index ff57d4828ffc..aa1a4cac3708 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -40,8 +40,9 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index 3ed16d5c909d..329f9a3b892e 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -44,10 +44,11 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index b1b7d2c5c059..cef7d62560c4 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -32,8 +32,9 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/44x/bluestone_defconfig b/arch/powerpc/configs/44x/bluestone_defconfig index 30a0a8e08fdd..20c8d26d7fc0 100644 --- a/arch/powerpc/configs/44x/bluestone_defconfig +++ b/arch/powerpc/configs/44x/bluestone_defconfig @@ -38,10 +38,11 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index a46942aac695..d5be93e6e92d 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -49,10 +49,11 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 07d77e51f1ba..f9269fc4ffcc 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -40,8 +40,9 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig index 2ce7e9aff09e..9be089038fd7 100644 --- a/arch/powerpc/configs/44x/eiger_defconfig +++ b/arch/powerpc/configs/44x/eiger_defconfig @@ -55,10 +55,11 @@ CONFIG_FUSION=y CONFIG_FUSION_SAS=y CONFIG_I2O=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 CONFIG_E1000E=y # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig index 18730ff9de7c..82f73035a7ce 100644 --- a/arch/powerpc/configs/44x/icon_defconfig +++ b/arch/powerpc/configs/44x/icon_defconfig @@ -56,8 +56,9 @@ CONFIG_FUSION_SAS=y CONFIG_FUSION_CTL=y CONFIG_FUSION_LOGGING=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index 34c09144a699..109562c3c6be 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -42,8 +42,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_MACINTOSH_DRIVERS=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig index 01cc2b1a7f9a..48802811da76 100644 --- a/arch/powerpc/configs/44x/redwood_defconfig +++ b/arch/powerpc/configs/44x/redwood_defconfig @@ -53,11 +53,12 @@ CONFIG_FUSION=y CONFIG_FUSION_SAS=y CONFIG_I2O=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 -CONFIG_IBM_NEW_EMAC_DEBUG=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 +CONFIG_IBM_EMAC_DEBUG=y CONFIG_E1000E=y # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index dfcffede16ad..ca088cd581af 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -44,8 +44,9 @@ CONFIG_ATA=y # CONFIG_SATA_PMP is not set CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_INPUT_FF_MEMLESS=m diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index 47e399f2892f..b7a653b626db 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -46,8 +46,9 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index a6a002ed5681..30de97f158a4 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -40,8 +40,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_MACINTOSH_DRIVERS=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index abf74dc1f79c..105bc56f4b2b 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -54,9 +54,10 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y CONFIG_MII=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_EMAC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT is not set diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index 980ff8f61fd4..3ff5a81c709f 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -171,3 +171,4 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 10562a5c65b9..4311d02a3bfd 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -185,3 +185,4 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index d32283555b53..c92c204a204b 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -100,5 +100,8 @@ CONFIG_DEBUG_INFO=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_VIRQ_DEBUG=y CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_TALITOS=y +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fcd85d2c72dc..a3467bfb7671 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -139,6 +139,7 @@ CONFIG_SND=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_PPC is not set # CONFIG_SND_USB is not set +CONFIG_SND_SOC=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 908c941fc24c..9693f6ed3da0 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -140,6 +140,7 @@ CONFIG_SND=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_PPC is not set # CONFIG_SND_USB is not set +CONFIG_SND_SOC=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index bfd634b5ada7..7cb703b948b1 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -50,8 +50,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_XILINX_SYSACE=m CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set CONFIG_SERIO=m # CONFIG_SERIO_I8042 is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 47133202a625..6cdf1c0d2c8a 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -63,8 +63,9 @@ CONFIG_BLK_DEV_SD=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_IBM_NEW_EMAC=y +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set CONFIG_SERIO=m # CONFIG_SERIO_I8042 is not set diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index 91010e8f8479..88e602f6430d 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -100,7 +100,8 @@ struct compat_statfs { compat_fsid_t f_fsid; int f_namelen; /* SunOS ignores this field. */ int f_frsize; - int f_spare[5]; + int f_flags; + int f_spare[4]; }; #define COMPAT_RLIM_OLD_INFINITY 0x7fffffff diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 0947b36e534c..5e0b6d511e14 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -196,7 +196,7 @@ static inline int qe_alive_during_sleep(void) /* Structure that defines QE firmware binary files. * - * See Documentation/powerpc/qe-firmware.txt for a description of these + * See Documentation/powerpc/qe_firmware.txt for a description of these * fields. */ struct qe_firmware { diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index f6736b7da463..fa0d27a400de 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -171,7 +171,7 @@ SYSCALL_SPU(setresuid) SYSCALL_SPU(getresuid) SYSCALL(ni_syscall) SYSCALL_SPU(poll) -COMPAT_SYS(nfsservctl) +SYSCALL(ni_syscall) SYSCALL_SPU(setresgid) SYSCALL_SPU(getresgid) COMPAT_SYS_SPU(prctl) diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 93e05d1b34b2..5354ae91bdde 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -54,6 +54,7 @@ extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); extern void __init udbg_init_usbgecko(void); extern void __init udbg_init_wsp(void); +extern void __init udbg_init_ehv_bc(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index faa82c1f3f68..b4607a91d1f4 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -67,6 +67,8 @@ void __init udbg_early_init(void) udbg_init_usbgecko(); #elif defined(CONFIG_PPC_EARLY_DEBUG_WSP) udbg_init_wsp(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC) + udbg_init_ehv_bc(); #endif #ifdef CONFIG_PPC_EARLY_DEBUG diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index d733d7ca939c..b5d87067a58b 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -130,21 +130,21 @@ config 405GP bool select IBM405_ERR77 select IBM405_ERR51 - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_ZMII config 405EP bool config 405EX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII config 405EZ bool - select IBM_NEW_EMAC_NO_FLOW_CTRL - select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT - select IBM_NEW_EMAC_MAL_COMMON_ERR + select IBM_EMAC_NO_FLOW_CTRL + select IBM_EMAC_MAL_CLR_ICINTSTAT + select IBM_EMAC_MAL_COMMON_ERR config 405GPR bool diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index e958b6f48ec2..762322ce24a9 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -23,7 +23,7 @@ config BLUESTONE default n select PPC44x_SIMPLE select APM821xx - select IBM_NEW_EMAC_RGMII + select IBM_EMAC_RGMII help This option enables support for the APM APM821xx Evaluation board. @@ -122,8 +122,8 @@ config CANYONLANDS select PPC4xx_PCI_EXPRESS select PCI_MSI select PPC4xx_MSI - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII help This option enables support for the AMCC PPC460EX evaluation board. @@ -135,8 +135,8 @@ config GLACIER select 460EX # Odd since it uses 460GT but the effects are the same select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII help This option enables support for the AMCC PPC460GT evaluation board. @@ -161,7 +161,7 @@ config EIGER select 460SX select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII + select IBM_EMAC_RGMII help This option enables support for the AMCC PPC460SX evaluation board. @@ -260,59 +260,59 @@ config 440EP bool select PPC_FPU select IBM440EP_ERR42 - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_ZMII select USB_ARCH_HAS_OHCI config 440EPX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII config 440GRX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII config 440GP bool - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_ZMII config 440GX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII #test only + select IBM_EMAC_TAH #test only config 440SP bool config 440SPe bool - select IBM_NEW_EMAC_EMAC4 + select IBM_EMAC_EMAC4 config 460EX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH config 460SX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select IBM_EMAC_TAH config APM821xx bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 498534cd5265..12f5932dadc9 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -80,7 +80,7 @@ config P1010_RDB config P1022_DS bool "Freescale P1022 DS" select DEFAULT_UIMAGE - select CONFIG_PHYS_64BIT # The DTS has 36-bit addresses + select PHYS_64BIT # The DTS has 36-bit addresses select SWIOTLB help This option enables support for the Freescale P1022DS reference board. diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 67d5009b4e86..2e7ff0c5cf42 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -17,10 +17,10 @@ config PPC_CELL_NATIVE select PPC_CELL_COMMON select MPIC select PPC_IO_WORKAROUNDS - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII #test only + select IBM_EMAC_TAH #test only default n config PPC_IBM_CELL_BLADE diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index 613070e9ddbe..f1eebcae9bf0 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the turbostation come + * Interrupt setup and service. Interrupts on the turbostation come * from the four PCI slots plus onboard 8241 devices: I2C, DUART. */ static void __init storcenter_init_IRQ(void) diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 5cc83851ad06..31a7d3a7ce25 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -561,6 +561,20 @@ static struct pci_ops u4_pcie_pci_ops = .write = u4_pcie_write_config, }; +static void __devinit pmac_pci_fixup_u4_of_node(struct pci_dev *dev) +{ + /* Apple's device-tree "hides" the root complex virtual P2P bridge + * on U4. However, Linux sees it, causing the PCI <-> OF matching + * code to fail to properly match devices below it. This works around + * it by setting the node of the bridge to point to the PHB node, + * which is not entirely correct but fixes the matching code and + * doesn't break anything else. It's also the simplest possible fix. + */ + if (dev->dev.of_node == NULL) + dev->dev.of_node = pcibios_get_phb_of_node(dev->bus); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node); + #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 2de8551df40f..c65f75aa7ff7 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -54,6 +54,7 @@ #define ODSR_CLEAR 0x1c00 #define LTLEECSR_ENABLE_ALL 0xFFC000FC #define ESCSR_CLEAR 0x07120204 +#define IECSR_CLEAR 0x80000000 #define RIO_PORT1_EDCSR 0x0640 #define RIO_PORT2_EDCSR 0x0680 @@ -1089,11 +1090,11 @@ static void port_error_handler(struct rio_mport *port, int offset) if (offset == 0) { out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); - out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR); out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); } else { out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); - out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR); out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); } } diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 904c6cbaf45b..3363fbc964f8 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -382,7 +382,7 @@ static void qe_upload_microcode(const void *base, /* * Upload a microcode to the I-RAM at a specific address. * - * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode * uploading. * * Currently, only version 1 is supported, so the 'version' field must be diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 984cd2029158..3330feca7502 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -47,7 +47,7 @@ struct uic { int index; int dcrbase; - spinlock_t lock; + raw_spinlock_t lock; /* The remapper for this UIC */ struct irq_host *irqhost; @@ -61,14 +61,14 @@ static void uic_unmask_irq(struct irq_data *d) u32 er, sr; sr = 1 << (31-src); - spin_lock_irqsave(&uic->lock, flags); + raw_spin_lock_irqsave(&uic->lock, flags); /* ack level-triggered interrupts here */ if (irqd_is_level_type(d)) mtdcr(uic->dcrbase + UIC_SR, sr); er = mfdcr(uic->dcrbase + UIC_ER); er |= sr; mtdcr(uic->dcrbase + UIC_ER, er); - spin_unlock_irqrestore(&uic->lock, flags); + raw_spin_unlock_irqrestore(&uic->lock, flags); } static void uic_mask_irq(struct irq_data *d) @@ -78,11 +78,11 @@ static void uic_mask_irq(struct irq_data *d) unsigned long flags; u32 er; - spin_lock_irqsave(&uic->lock, flags); + raw_spin_lock_irqsave(&uic->lock, flags); er = mfdcr(uic->dcrbase + UIC_ER); er &= ~(1 << (31 - src)); mtdcr(uic->dcrbase + UIC_ER, er); - spin_unlock_irqrestore(&uic->lock, flags); + raw_spin_unlock_irqrestore(&uic->lock, flags); } static void uic_ack_irq(struct irq_data *d) @@ -91,9 +91,9 @@ static void uic_ack_irq(struct irq_data *d) unsigned int src = irqd_to_hwirq(d); unsigned long flags; - spin_lock_irqsave(&uic->lock, flags); + raw_spin_lock_irqsave(&uic->lock, flags); mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src)); - spin_unlock_irqrestore(&uic->lock, flags); + raw_spin_unlock_irqrestore(&uic->lock, flags); } static void uic_mask_ack_irq(struct irq_data *d) @@ -104,7 +104,7 @@ static void uic_mask_ack_irq(struct irq_data *d) u32 er, sr; sr = 1 << (31-src); - spin_lock_irqsave(&uic->lock, flags); + raw_spin_lock_irqsave(&uic->lock, flags); er = mfdcr(uic->dcrbase + UIC_ER); er &= ~sr; mtdcr(uic->dcrbase + UIC_ER, er); @@ -118,7 +118,7 @@ static void uic_mask_ack_irq(struct irq_data *d) */ if (!irqd_is_level_type(d)) mtdcr(uic->dcrbase + UIC_SR, sr); - spin_unlock_irqrestore(&uic->lock, flags); + raw_spin_unlock_irqrestore(&uic->lock, flags); } static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type) @@ -152,7 +152,7 @@ static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type) mask = ~(1 << (31 - src)); - spin_lock_irqsave(&uic->lock, flags); + raw_spin_lock_irqsave(&uic->lock, flags); tr = mfdcr(uic->dcrbase + UIC_TR); pr = mfdcr(uic->dcrbase + UIC_PR); tr = (tr & mask) | (trigger << (31-src)); @@ -161,7 +161,7 @@ static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type) mtdcr(uic->dcrbase + UIC_PR, pr); mtdcr(uic->dcrbase + UIC_TR, tr); - spin_unlock_irqrestore(&uic->lock, flags); + raw_spin_unlock_irqrestore(&uic->lock, flags); return 0; } @@ -254,7 +254,7 @@ static struct uic * __init uic_init_one(struct device_node *node) if (! uic) return NULL; /* FIXME: panic? */ - spin_lock_init(&uic->lock); + raw_spin_lock_init(&uic->lock); indexp = of_get_property(node, "cell-index", &len); if (!indexp || (len != sizeof(u32))) { printk(KERN_ERR "uic: Device node %s has missing or invalid " diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ed5cb5af5281..6b99fc3f9b63 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -91,6 +91,7 @@ config S390 select HAVE_ARCH_MUTEX_CPU_RELAX select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 select HAVE_RCU_TABLE_FREE if SMP + select ARCH_SAVE_PAGE_KEYS if HIBERNATION select ARCH_INLINE_SPIN_TRYLOCK select ARCH_INLINE_SPIN_TRYLOCK_BH select ARCH_INLINE_SPIN_LOCK diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 6023c6dc1fb7..74c8f5e76ce4 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -562,10 +562,9 @@ static int dbfs_d204_create(void **data, void **data_free_ptr, size_t *size) void *base; buf_size = PAGE_SIZE * (diag204_buf_pages + 1) + sizeof(d204->hdr); - base = vmalloc(buf_size); + base = vzalloc(buf_size); if (!base) return -ENOMEM; - memset(base, 0, buf_size); d204 = page_align_ptr(base + sizeof(d204->hdr)) - sizeof(d204->hdr); rc = diag204_do_store(d204->buf, diag204_buf_pages); if (rc) { diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index da359ca6fe55..cdb9b78f6c08 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h @@ -131,7 +131,8 @@ struct compat_statfs { compat_fsid_t f_fsid; s32 f_namelen; s32 f_frsize; - s32 f_spare[6]; + s32 f_flags; + s32 f_spare[5]; }; #define COMPAT_RLIM_OLD_INFINITY 0x7fffffff diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 64b61bf72e93..547f1a6a35d4 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -188,7 +188,8 @@ extern char elf_platform[]; #define SET_PERSONALITY(ex) \ do { \ if (personality(current->personality) != PER_LINUX32) \ - set_personality(PER_LINUX); \ + set_personality(PER_LINUX | \ + (current->personality & ~PER_MASK)); \ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ set_thread_flag(TIF_31BIT); \ else \ diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 519eb5f187ef..c0cb794bb365 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) * struct gmap_struct - guest address space * @mm: pointer to the parent mm_struct * @table: pointer to the page directory + * @asce: address space control element for gmap page table * @crst_list: list of all crst tables used in the guest address space */ struct gmap { struct list_head list; struct mm_struct *mm; unsigned long *table; + unsigned long asce; struct list_head crst_list; }; diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index cbbf7d831a33..e63d13dd3bf5 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -125,6 +125,40 @@ struct slibe { }; /** + * struct qaob - queue asynchronous operation block + * @res0: reserved parameters + * @res1: reserved parameter + * @res2: reserved parameter + * @res3: reserved parameter + * @aorc: asynchronous operation return code + * @flags: internal flags + * @cbtbs: control block type + * @sb_count: number of storage blocks + * @sba: storage block element addresses + * @dcount: size of storage block elements + * @user0: user defineable value + * @res4: reserved paramater + * @user1: user defineable value + * @user2: user defineable value + */ +struct qaob { + u64 res0[6]; + u8 res1; + u8 res2; + u8 res3; + u8 aorc; + u8 flags; + u16 cbtbs; + u8 sb_count; + u64 sba[QDIO_MAX_ELEMENTS_PER_BUFFER]; + u16 dcount[QDIO_MAX_ELEMENTS_PER_BUFFER]; + u64 user0; + u64 res4[2]; + u64 user1; + u64 user2; +} __attribute__ ((packed, aligned(256))); + +/** * struct slib - storage list information block (SLIB) * @nsliba: next SLIB address (if any) * @sla: SL address @@ -229,6 +263,41 @@ struct slsb { #define CHSC_AC2_DATA_DIV_AVAILABLE 0x0010 #define CHSC_AC2_DATA_DIV_ENABLED 0x0002 +/** + * struct qdio_outbuf_state - SBAL related asynchronous operation information + * (for communication with upper layer programs) + * (only required for use with completion queues) + * @flags: flags indicating state of buffer + * @aob: pointer to QAOB used for the particular SBAL + * @user: pointer to upper layer program's state information related to SBAL + * (stored in user1 data of QAOB) + */ +struct qdio_outbuf_state { + u8 flags; + struct qaob *aob; + void *user; +}; + +#define QDIO_OUTBUF_STATE_FLAG_NONE 0x00 +#define QDIO_OUTBUF_STATE_FLAG_PENDING 0x01 + +#define CHSC_AC1_INITIATE_INPUTQ 0x80 + + +/* qdio adapter-characteristics-1 flag */ +#define AC1_SIGA_INPUT_NEEDED 0x40 /* process input queues */ +#define AC1_SIGA_OUTPUT_NEEDED 0x20 /* process output queues */ +#define AC1_SIGA_SYNC_NEEDED 0x10 /* ask hypervisor to sync */ +#define AC1_AUTOMATIC_SYNC_ON_THININT 0x08 /* set by hypervisor */ +#define AC1_AUTOMATIC_SYNC_ON_OUT_PCI 0x04 /* set by hypervisor */ +#define AC1_SC_QEBSM_AVAILABLE 0x02 /* available for subchannel */ +#define AC1_SC_QEBSM_ENABLED 0x01 /* enabled for subchannel */ + +#define CHSC_AC2_DATA_DIV_AVAILABLE 0x0010 +#define CHSC_AC2_DATA_DIV_ENABLED 0x0002 + +#define CHSC_AC3_FORMAT2_CQ_AVAILABLE 0x8000 + struct qdio_ssqd_desc { u8 flags; u8:8; @@ -247,8 +316,7 @@ struct qdio_ssqd_desc { u64 sch_token; u8 mro; u8 mri; - u8:8; - u8 sbalic; + u16 qdioac3; u16:16; u8:8; u8 mmwc; @@ -284,9 +352,11 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, * @no_output_qs: number of output queues * @input_handler: handler to be called for input queues * @output_handler: handler to be called for output queues + * @queue_start_poll: polling handlers (one per input queue or NULL) * @int_parm: interruption parameter * @input_sbal_addr_array: address of no_input_qs * 128 pointers * @output_sbal_addr_array: address of no_output_qs * 128 pointers + * @output_sbal_state_array: no_output_qs * 128 state info (for CQ or NULL) */ struct qdio_initialize { struct ccw_device *cdev; @@ -302,11 +372,12 @@ struct qdio_initialize { unsigned int no_output_qs; qdio_handler_t *input_handler; qdio_handler_t *output_handler; - void (*queue_start_poll) (struct ccw_device *, int, unsigned long); + void (**queue_start_poll) (struct ccw_device *, int, unsigned long); int scan_threshold; unsigned long int_parm; void **input_sbal_addr_array; void **output_sbal_addr_array; + struct qdio_outbuf_state *output_sbal_state_array; }; #define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */ @@ -321,6 +392,7 @@ struct qdio_initialize { extern int qdio_allocate(struct qdio_initialize *); extern int qdio_establish(struct qdio_initialize *); extern int qdio_activate(struct ccw_device *); +extern void qdio_release_aob(struct qaob *); extern int do_QDIO(struct ccw_device *, unsigned int, int, unsigned int, unsigned int); extern int qdio_start_irq(struct ccw_device *, int); diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 532fd4322156..2b45591e1582 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <asm/vdso.h> #include <asm/sigp.h> +#include <asm/pgtable.h> /* * Make sure that the compiler is new enough. We want a compiler that @@ -126,6 +127,7 @@ int main(void) DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack)); DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack)); DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack)); + DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); @@ -151,6 +153,7 @@ int main(void) DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data)); DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap)); DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp)); + DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce)); #endif /* CONFIG_32BIT */ return 0; } diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 08ab9aa6a0d5..7526db6bf501 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -665,12 +665,6 @@ ENTRY(sys32_poll_wrapper) lgfr %r4,%r4 # long jg sys_poll # branch to system call -ENTRY(compat_sys_nfsservctl_wrapper) - lgfr %r2,%r2 # int - llgtr %r3,%r3 # struct compat_nfsctl_arg* - llgtr %r4,%r4 # union compat_nfsctl_res* - jg compat_sys_nfsservctl # branch to system call - ENTRY(sys32_setresgid16_wrapper) llgfr %r2,%r2 # __kernel_old_gid_emu31_t llgfr %r3,%r3 # __kernel_old_gid_emu31_t diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 068f8465c4ee..f297456dba7a 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -396,17 +396,19 @@ static __init void detect_machine_facilities(void) static __init void rescue_initrd(void) { #ifdef CONFIG_BLK_DEV_INITRD + unsigned long min_initrd_addr = (unsigned long) _end + (4UL << 20); /* - * Move the initrd right behind the bss section in case it starts - * within the bss section. So we don't overwrite it when the bss - * section gets cleared. + * Just like in case of IPL from VM reader we make sure there is a + * gap of 4MB between end of kernel and start of initrd. + * That way we can also be sure that saving an NSS will succeed, + * which however only requires different segments. */ if (!INITRD_START || !INITRD_SIZE) return; - if (INITRD_START >= (unsigned long) __bss_stop) + if (INITRD_START >= min_initrd_addr) return; - memmove(__bss_stop, (void *) INITRD_START, INITRD_SIZE); - INITRD_START = (unsigned long) __bss_stop; + memmove((void *) min_initrd_addr, (void *) INITRD_START, INITRD_SIZE); + INITRD_START = min_initrd_addr; #endif } diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 5f729d627cef..713da0760538 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -1076,6 +1076,11 @@ sie_loop: lg %r14,__LC_THREAD_INFO # pointer thread_info struct tm __TI_flags+7(%r14),_TIF_EXIT_SIE jnz sie_exit + lg %r14,__LC_GMAP # get gmap pointer + ltgr %r14,%r14 + jz sie_gmap + lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce +sie_gmap: lg %r14,__SF_EMPTY(%r15) # get control block pointer SPP __SF_EMPTY(%r15) # set guest id sie 0(%r14) @@ -1083,6 +1088,7 @@ sie_done: SPP __LC_CMF_HPP # set host id lg %r14,__LC_THREAD_INFO # pointer thread_info struct sie_exit: + lctlg %c1,%c1,__LC_USER_ASCE # load primary asce ni __TI_flags+6(%r14),255-(_TIF_SIE>>8) lg %r14,__SF_EMPTY+8(%r15) # load guest register save area stmg %r0,%r13,0(%r14) # save guest gprs 0-13 diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 04361d5a4279..48c710206366 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1220,7 +1220,7 @@ static int __init reipl_fcp_init(void) /* sysfs: create fcp kset for mixing attr group and bin attrs */ reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL, &reipl_kset->kobj); - if (!reipl_kset) { + if (!reipl_fcp_kset) { free_page((unsigned long) reipl_block_fcp); return -ENOMEM; } @@ -1618,7 +1618,8 @@ static struct shutdown_action vmcmd_action = {SHUTDOWN_ACTION_VMCMD_STR, static void stop_run(struct shutdown_trigger *trigger) { - if (strcmp(trigger->name, ON_PANIC_STR) == 0) + if (strcmp(trigger->name, ON_PANIC_STR) == 0 || + strcmp(trigger->name, ON_RESTART_STR) == 0) disabled_wait((unsigned long) __builtin_return_address(0)); while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) cpu_relax(); @@ -1717,7 +1718,7 @@ static void do_panic(void) /* on restart */ static struct shutdown_trigger on_restart_trigger = {ON_RESTART_STR, - &reipl_action}; + &stop_action}; static ssize_t on_restart_show(struct kobject *kobj, struct kobj_attribute *attr, char *page) diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c index cf9e5c6d5527..b6f9afed74ec 100644 --- a/arch/s390/kernel/suspend.c +++ b/arch/s390/kernel/suspend.c @@ -7,6 +7,7 @@ */ #include <linux/pfn.h> +#include <linux/mm.h> #include <asm/system.h> /* @@ -14,6 +15,123 @@ */ extern const void __nosave_begin, __nosave_end; +/* + * The restore of the saved pages in an hibernation image will set + * the change and referenced bits in the storage key for each page. + * Overindication of the referenced bits after an hibernation cycle + * does not cause any harm but the overindication of the change bits + * would cause trouble. + * Use the ARCH_SAVE_PAGE_KEYS hooks to save the storage key of each + * page to the most significant byte of the associated page frame + * number in the hibernation image. + */ + +/* + * Key storage is allocated as a linked list of pages. + * The size of the keys array is (PAGE_SIZE - sizeof(long)) + */ +struct page_key_data { + struct page_key_data *next; + unsigned char data[]; +}; + +#define PAGE_KEY_DATA_SIZE (PAGE_SIZE - sizeof(struct page_key_data *)) + +static struct page_key_data *page_key_data; +static struct page_key_data *page_key_rp, *page_key_wp; +static unsigned long page_key_rx, page_key_wx; + +/* + * For each page in the hibernation image one additional byte is + * stored in the most significant byte of the page frame number. + * On suspend no additional memory is required but on resume the + * keys need to be memorized until the page data has been restored. + * Only then can the storage keys be set to their old state. + */ +unsigned long page_key_additional_pages(unsigned long pages) +{ + return DIV_ROUND_UP(pages, PAGE_KEY_DATA_SIZE); +} + +/* + * Free page_key_data list of arrays. + */ +void page_key_free(void) +{ + struct page_key_data *pkd; + + while (page_key_data) { + pkd = page_key_data; + page_key_data = pkd->next; + free_page((unsigned long) pkd); + } +} + +/* + * Allocate page_key_data list of arrays with enough room to store + * one byte for each page in the hibernation image. + */ +int page_key_alloc(unsigned long pages) +{ + struct page_key_data *pk; + unsigned long size; + + size = DIV_ROUND_UP(pages, PAGE_KEY_DATA_SIZE); + while (size--) { + pk = (struct page_key_data *) get_zeroed_page(GFP_KERNEL); + if (!pk) { + page_key_free(); + return -ENOMEM; + } + pk->next = page_key_data; + page_key_data = pk; + } + page_key_rp = page_key_wp = page_key_data; + page_key_rx = page_key_wx = 0; + return 0; +} + +/* + * Save the storage key into the upper 8 bits of the page frame number. + */ +void page_key_read(unsigned long *pfn) +{ + unsigned long addr; + + addr = (unsigned long) page_address(pfn_to_page(*pfn)); + *(unsigned char *) pfn = (unsigned char) page_get_storage_key(addr); +} + +/* + * Extract the storage key from the upper 8 bits of the page frame number + * and store it in the page_key_data list of arrays. + */ +void page_key_memorize(unsigned long *pfn) +{ + page_key_wp->data[page_key_wx] = *(unsigned char *) pfn; + *(unsigned char *) pfn = 0; + if (++page_key_wx < PAGE_KEY_DATA_SIZE) + return; + page_key_wp = page_key_wp->next; + page_key_wx = 0; +} + +/* + * Get the next key from the page_key_data list of arrays and set the + * storage key of the page referred by @address. If @address refers to + * a "safe" page the swsusp_arch_resume code will transfer the storage + * key from the buffer page to the original page. + */ +void page_key_write(void *address) +{ + page_set_storage_key((unsigned long) address, + page_key_rp->data[page_key_rx], 0); + if (++page_key_rx >= PAGE_KEY_DATA_SIZE) + return; + page_key_rp = page_key_rp->next; + page_key_rx = 0; +} + int pfn_is_nosave(unsigned long pfn) { unsigned long nosave_begin_pfn = PFN_DOWN(__pa(&__nosave_begin)); diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index 51bcdb50a230..acb78cdee896 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -136,11 +136,14 @@ ENTRY(swsusp_arch_resume) 0: lg %r2,8(%r1) lg %r4,0(%r1) + iske %r0,%r4 lghi %r3,PAGE_SIZE lghi %r5,PAGE_SIZE 1: mvcle %r2,%r4,0 jo 1b + lg %r2,8(%r1) + sske %r0,%r2 lg %r1,16(%r1) ltgr %r1,%r1 jnz 0b diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 6ee39ef8fe4a..73eb08c874fb 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -177,7 +177,7 @@ SYSCALL(sys_getresuid16,sys_ni_syscall,sys32_getresuid16_wrapper) /* 165 old get NI_SYSCALL /* for vm86 */ NI_SYSCALL /* old sys_query_module */ SYSCALL(sys_poll,sys_poll,sys32_poll_wrapper) -SYSCALL(sys_nfsservctl,sys_nfsservctl,compat_sys_nfsservctl_wrapper) +NI_SYSCALL /* old nfsservctl */ SYSCALL(sys_setresgid16,sys_ni_syscall,sys32_setresgid16_wrapper) /* 170 old setresgid16 syscall */ SYSCALL(sys_getresgid16,sys_ni_syscall,sys32_getresgid16_wrapper) /* old getresgid16 syscall */ SYSCALL(sys_prctl,sys_prctl,sys32_prctl_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index dff933065ab6..8d65bd0383fc 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -109,10 +109,14 @@ static void fixup_clock_comparator(unsigned long long delta) set_clock_comparator(S390_lowcore.clock_comparator); } -static int s390_next_event(unsigned long delta, +static int s390_next_ktime(ktime_t expires, struct clock_event_device *evt) { - S390_lowcore.clock_comparator = get_clock() + delta; + u64 nsecs; + + nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset())); + do_div(nsecs, 125); + S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9); set_clock_comparator(S390_lowcore.clock_comparator); return 0; } @@ -137,14 +141,15 @@ void init_cpu_timer(void) cpu = smp_processor_id(); cd = &per_cpu(comparators, cpu); cd->name = "comparator"; - cd->features = CLOCK_EVT_FEAT_ONESHOT; + cd->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_KTIME; cd->mult = 16777; cd->shift = 12; cd->min_delta_ns = 1; cd->max_delta_ns = LONG_MAX; cd->rating = 400; cd->cpumask = cpumask_of(cpu); - cd->set_next_event = s390_next_event; + cd->set_next_ktime = s390_next_ktime; cd->set_mode = s390_set_mode; clockevents_register_device(cd); diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index f17296e4fc89..dc2b580e27bc 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -123,6 +123,7 @@ int kvm_dev_ioctl_check_extension(long ext) switch (ext) { case KVM_CAP_S390_PSW: + case KVM_CAP_S390_GMAP: r = 1; break; default: @@ -263,10 +264,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK; restore_fp_regs(&vcpu->arch.guest_fpregs); restore_access_regs(vcpu->arch.guest_acrs); + gmap_enable(vcpu->arch.gmap); } void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { + gmap_disable(vcpu->arch.gmap); save_fp_regs(&vcpu->arch.guest_fpregs); save_access_regs(vcpu->arch.guest_acrs); restore_fp_regs(&vcpu->arch.host_fpregs); @@ -461,7 +464,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_disable(); kvm_guest_enter(); local_irq_enable(); - gmap_enable(vcpu->arch.gmap); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) { @@ -470,7 +472,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) } VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); - gmap_disable(vcpu->arch.gmap); local_irq_disable(); kvm_guest_exit(); local_irq_enable(); diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 4d1f2bce87b3..5d56c2b95b14 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -160,6 +160,8 @@ struct gmap *gmap_alloc(struct mm_struct *mm) table = (unsigned long *) page_to_phys(page); crst_table_init(table, _REGION1_ENTRY_EMPTY); gmap->table = table; + gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | __pa(table); list_add(&gmap->list, &mm->context.gmap_list); return gmap; @@ -240,10 +242,6 @@ EXPORT_SYMBOL_GPL(gmap_free); */ void gmap_enable(struct gmap *gmap) { - /* Load primary space page table origin. */ - S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | __pa(gmap->table); - asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) ); S390_lowcore.gmap = (unsigned long) gmap; } EXPORT_SYMBOL_GPL(gmap_enable); @@ -254,10 +252,6 @@ EXPORT_SYMBOL_GPL(gmap_enable); */ void gmap_disable(struct gmap *gmap) { - /* Load primary space page table origin. */ - S390_lowcore.user_asce = - gmap->mm->context.asce_bits | __pa(gmap->mm->pgd); - asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) ); S390_lowcore.gmap = 0UL; } EXPORT_SYMBOL_GPL(gmap_disable); @@ -309,15 +303,15 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len) /* Walk the guest addr space page table */ table = gmap->table + (((to + off) >> 53) & 0x7ff); if (*table & _REGION_ENTRY_INV) - return 0; + goto out; table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); table = table + (((to + off) >> 42) & 0x7ff); if (*table & _REGION_ENTRY_INV) - return 0; + goto out; table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); table = table + (((to + off) >> 31) & 0x7ff); if (*table & _REGION_ENTRY_INV) - return 0; + goto out; table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); table = table + (((to + off) >> 20) & 0x7ff); @@ -325,6 +319,7 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len) flush |= gmap_unlink_segment(gmap, table); *table = _SEGMENT_ENTRY_INV; } +out: up_read(&gmap->mm->mmap_sem); if (flush) gmap_flush_tlb(gmap); diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index b97baf81a87b..2d3679b2447f 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -123,7 +123,7 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, struct perf_event; struct perf_sample_data; -extern void ptrace_triggered(struct perf_event *bp, int nmi, +extern void ptrace_triggered(struct perf_event *bp, struct perf_sample_data *data, struct pt_regs *regs); #define task_pt_regs(task) \ diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h deleted file mode 100644 index 0f325da0f923..000000000000 --- a/arch/sh/include/asm/sh_eth.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_SH_ETH_H__ -#define __ASM_SH_ETH_H__ - -#include <linux/phy.h> - -enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN}; -enum { - SH_ETH_REG_GIGABIT, - SH_ETH_REG_FAST_SH4, - SH_ETH_REG_FAST_SH3_SH2 -}; - -struct sh_eth_plat_data { - int phy; - int edmac_endian; - int register_type; - phy_interface_t phy_interface; - void (*set_mdio_gate)(unsigned long addr); - - unsigned char mac_addr[6]; - unsigned no_ether_link:1; - unsigned ether_link_active_low:1; -}; - -#endif diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index e915deafac89..05559295d2ca 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -15,6 +15,7 @@ #include <linux/serial_sci.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> #include <linux/sh_timer.h> #include <linux/sh_dma.h> diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 32114e0941ae..db4ecd731a00 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -22,7 +22,7 @@ #include <linux/atomic.h> #include <asm/smp.h> -static void (*pm_idle)(void); +void (*pm_idle)(void); static int hlt_counter; diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 39b051de4c7c..293e39c59c00 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -185,7 +185,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* vm86 */ .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 089c4d825d08..ceb34b94afa9 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -189,7 +189,7 @@ sys_call_table: .long sys_ni_syscall /* vm86 */ .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index d9006f8ffc14..7bbef95c9d1b 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -316,6 +316,35 @@ static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs, break; } break; + + case 9: /* mov.w @(disp,PC),Rn */ + srcu = (unsigned char __user *)regs->pc; + srcu += 4; + srcu += (instruction & 0x00FF) << 1; + dst = (unsigned char *)rn; + *(unsigned long *)dst = 0; + +#if !defined(__LITTLE_ENDIAN__) + dst += 2; +#endif + + if (ma->from(dst, srcu, 2)) + goto fetch_fault; + sign_extend(2, dst); + ret = 0; + break; + + case 0xd: /* mov.l @(disp,PC),Rn */ + srcu = (unsigned char __user *)(regs->pc & ~0x3); + srcu += 4; + srcu += (instruction & 0x00FF) << 2; + dst = (unsigned char *)rn; + *(unsigned long *)dst = 0; + + if (ma->from(dst, srcu, 4)) + goto fetch_fault; + ret = 0; + break; } return ret; @@ -466,6 +495,7 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, case 0x0500: /* mov.w @(disp,Rm),R0 */ goto simple; case 0x0B00: /* bf lab - no delayslot*/ + ret = 0; break; case 0x0F00: /* bf/s lab */ ret = handle_delayslot(regs, instruction, ma); @@ -479,6 +509,7 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, } break; case 0x0900: /* bt lab - no delayslot */ + ret = 0; break; case 0x0D00: /* bt/s lab */ ret = handle_delayslot(regs, instruction, ma); @@ -494,6 +525,9 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, } break; + case 0x9000: /* mov.w @(disp,Rm),Rn */ + goto simple; + case 0xA000: /* bra label */ ret = handle_delayslot(regs, instruction, ma); if (ret==0) @@ -507,6 +541,9 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, regs->pc += SH_PC_12BIT_OFFSET(instruction); } break; + + case 0xD000: /* mov.l @(disp,Rm),Rn */ + goto simple; } return ret; diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h index 6f57325bb883..b8be20d42a0a 100644 --- a/arch/sparc/include/asm/compat.h +++ b/arch/sparc/include/asm/compat.h @@ -134,7 +134,8 @@ struct compat_statfs { compat_fsid_t f_fsid; int f_namelen; /* SunOS ignores this field. */ int f_frsize; - int f_spare[5]; + int f_flags; + int f_spare[4]; }; #define COMPAT_RLIM_INFINITY 0x7fffffff diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h index 1407c07bdade..f6ae2b2b6870 100644 --- a/arch/sparc/include/asm/pgtsrmmu.h +++ b/arch/sparc/include/asm/pgtsrmmu.h @@ -280,7 +280,7 @@ static inline unsigned long srmmu_hwprobe(unsigned long vaddr) return retval; } #else -#define srmmu_hwprobe(addr) (srmmu_swprobe(addr, 0) & SRMMU_PTE_PMASK) +#define srmmu_hwprobe(addr) srmmu_swprobe(addr, 0) #endif static inline int diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h index a1607d180354..69914d748130 100644 --- a/arch/sparc/include/asm/sigcontext.h +++ b/arch/sparc/include/asm/sigcontext.h @@ -45,6 +45,19 @@ typedef struct { int si_mask; } __siginfo32_t; +#define __SIGC_MAXWIN 7 + +typedef struct { + unsigned long locals[8]; + unsigned long ins[8]; +} __siginfo_reg_window; + +typedef struct { + int wsaved; + __siginfo_reg_window reg_window[__SIGC_MAXWIN]; + unsigned long rwbuf_stkptrs[__SIGC_MAXWIN]; +} __siginfo_rwin_t; + #ifdef CONFIG_SPARC64 typedef struct { unsigned int si_float_regs [64]; @@ -73,6 +86,7 @@ struct sigcontext { unsigned long ss_size; } sigc_stack; unsigned long sigc_mask; + __siginfo_rwin_t * sigc_rwin_save; }; #else diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h index 55a17c6efeb8..d06a26601753 100644 --- a/arch/sparc/include/asm/spitfire.h +++ b/arch/sparc/include/asm/spitfire.h @@ -43,6 +43,8 @@ #define SUN4V_CHIP_NIAGARA1 0x01 #define SUN4V_CHIP_NIAGARA2 0x02 #define SUN4V_CHIP_NIAGARA3 0x03 +#define SUN4V_CHIP_NIAGARA4 0x04 +#define SUN4V_CHIP_NIAGARA5 0x05 #define SUN4V_CHIP_UNKNOWN 0xff #ifndef __ASSEMBLY__ diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h index 9ed6ff679ab7..ee8edc68423e 100644 --- a/arch/sparc/include/asm/xor_64.h +++ b/arch/sparc/include/asm/xor_64.h @@ -66,6 +66,8 @@ static struct xor_block_template xor_block_niagara = { ((tlb_type == hypervisor && \ (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \ sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || \ - sun4v_chip_type == SUN4V_CHIP_NIAGARA3)) ? \ + sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || \ + sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || \ + sun4v_chip_type == SUN4V_CHIP_NIAGARA5)) ? \ &xor_block_niagara : \ &xor_block_VIS) diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index b90b4a1d070a..cb85458f89d2 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_SPARC32) += sun4m_irq.o sun4c_irq.o sun4d_irq.o obj-y += process_$(BITS).o obj-y += signal_$(BITS).o +obj-y += sigutil_$(BITS).o obj-$(CONFIG_SPARC32) += ioport.o obj-y += setup_$(BITS).o obj-y += idprom.o diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index 9810fd881058..ba9b1cec4e6b 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -481,6 +481,18 @@ static void __init sun4v_cpu_probe(void) sparc_pmu_type = "niagara3"; break; + case SUN4V_CHIP_NIAGARA4: + sparc_cpu_type = "UltraSparc T4 (Niagara4)"; + sparc_fpu_type = "UltraSparc T4 integrated FPU"; + sparc_pmu_type = "niagara4"; + break; + + case SUN4V_CHIP_NIAGARA5: + sparc_cpu_type = "UltraSparc T5 (Niagara5)"; + sparc_fpu_type = "UltraSparc T5 integrated FPU"; + sparc_pmu_type = "niagara5"; + break; + default: printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n", prom_cpu_compatible); diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c index 4197e8d62d4c..9323eafccb93 100644 --- a/arch/sparc/kernel/cpumap.c +++ b/arch/sparc/kernel/cpumap.c @@ -325,6 +325,8 @@ static int iterate_cpu(struct cpuinfo_tree *t, unsigned int root_index) case SUN4V_CHIP_NIAGARA1: case SUN4V_CHIP_NIAGARA2: case SUN4V_CHIP_NIAGARA3: + case SUN4V_CHIP_NIAGARA4: + case SUN4V_CHIP_NIAGARA5: rover_inc_table = niagara_iterate_method; break; default: diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 0eac1b2fc53d..0d810c2f1d00 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -133,7 +133,7 @@ prom_sun4v_name: prom_niagara_prefix: .asciz "SUNW,UltraSPARC-T" prom_sparc_prefix: - .asciz "SPARC-T" + .asciz "SPARC-" .align 4 prom_root_compatible: .skip 64 @@ -396,7 +396,7 @@ sun4v_chip_type: or %g1, %lo(prom_cpu_compatible), %g1 sethi %hi(prom_sparc_prefix), %g7 or %g7, %lo(prom_sparc_prefix), %g7 - mov 7, %g3 + mov 6, %g3 90: ldub [%g7], %g2 ldub [%g1], %g4 cmp %g2, %g4 @@ -408,10 +408,23 @@ sun4v_chip_type: sethi %hi(prom_cpu_compatible), %g1 or %g1, %lo(prom_cpu_compatible), %g1 - ldub [%g1 + 7], %g2 + ldub [%g1 + 6], %g2 + cmp %g2, 'T' + be,pt %xcc, 70f + cmp %g2, 'M' + bne,pn %xcc, 4f + nop + +70: ldub [%g1 + 7], %g2 cmp %g2, '3' be,pt %xcc, 5f mov SUN4V_CHIP_NIAGARA3, %g4 + cmp %g2, '4' + be,pt %xcc, 5f + mov SUN4V_CHIP_NIAGARA4, %g4 + cmp %g2, '5' + be,pt %xcc, 5f + mov SUN4V_CHIP_NIAGARA5, %g4 ba,pt %xcc, 4f nop @@ -545,6 +558,12 @@ niagara_tlb_fixup: cmp %g1, SUN4V_CHIP_NIAGARA3 be,pt %xcc, niagara2_patch nop + cmp %g1, SUN4V_CHIP_NIAGARA4 + be,pt %xcc, niagara2_patch + nop + cmp %g1, SUN4V_CHIP_NIAGARA5 + be,pt %xcc, niagara2_patch + nop call generic_patch_copyops nop diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h index 100b9c204e78..42851122bbd9 100644 --- a/arch/sparc/kernel/irq.h +++ b/arch/sparc/kernel/irq.h @@ -88,7 +88,7 @@ BTFIXUPDEF_CALL(void, set_irq_udt, int) #define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu) /* All SUN4D IPIs are sent on this IRQ, may be shared with hard IRQs */ -#define SUN4D_IPI_IRQ 14 +#define SUN4D_IPI_IRQ 13 extern void sun4d_ipi_interrupt(void); diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 1e94f946570e..8aa0d4408586 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -230,7 +230,8 @@ static void pci_parse_of_addrs(struct platform_device *op, res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; } else if (i == dev->rom_base_reg) { res = &dev->resource[PCI_ROM_RESOURCE]; - flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE + | IORESOURCE_SIZEALIGN; } else { printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); continue; diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c index c8cc461ff75f..f793742eec2b 100644 --- a/arch/sparc/kernel/process_32.c +++ b/arch/sparc/kernel/process_32.c @@ -380,8 +380,7 @@ void flush_thread(void) #endif } - /* Now, this task is no longer a kernel thread. */ - current->thread.current_ds = USER_DS; + /* This task is no longer a kernel thread. */ if (current->thread.flags & SPARC_FLAG_KTHREAD) { current->thread.flags &= ~SPARC_FLAG_KTHREAD; diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index c158a95ec664..d959cd0a4aa4 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -368,9 +368,6 @@ void flush_thread(void) /* Clear FPU register state. */ t->fpsaved[0] = 0; - - if (get_thread_current_ds() != ASI_AIUS) - set_fs(USER_DS); } /* It's a bit more tricky when 64-bit tasks are involved... */ diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c index d26e1f6c717a..3e3e2914c70b 100644 --- a/arch/sparc/kernel/setup_32.c +++ b/arch/sparc/kernel/setup_32.c @@ -137,7 +137,7 @@ static void __init process_switch(char c) prom_halt(); break; case 'p': - /* Just ignore, this behavior is now the default. */ + prom_early_console.flags &= ~CON_BOOT; break; default: printk("Unknown boot switch (-%c)\n", c); diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index 3e9daea1653d..c965595aa7e9 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -106,7 +106,7 @@ static void __init process_switch(char c) prom_halt(); break; case 'p': - /* Just ignore, this behavior is now the default. */ + prom_early_console.flags &= ~CON_BOOT; break; case 'P': /* Force UltraSPARC-III P-Cache on. */ @@ -425,10 +425,14 @@ static void __init init_sparc64_elf_hwcap(void) else if (tlb_type == hypervisor) { if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || - sun4v_chip_type == SUN4V_CHIP_NIAGARA3) + sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA5) cap |= HWCAP_SPARC_BLKINIT; if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || - sun4v_chip_type == SUN4V_CHIP_NIAGARA3) + sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA5) cap |= HWCAP_SPARC_N2; } @@ -440,17 +444,27 @@ static void __init init_sparc64_elf_hwcap(void) cap |= AV_SPARC_VIS; if (tlb_type == cheetah || tlb_type == cheetah_plus) cap |= AV_SPARC_VIS | AV_SPARC_VIS2; - if (tlb_type == cheetah_plus) - cap |= AV_SPARC_POPC; + if (tlb_type == cheetah_plus) { + unsigned long impl, ver; + + __asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver)); + impl = ((ver >> 32) & 0xffff); + if (impl == PANTHER_IMPL) + cap |= AV_SPARC_POPC; + } if (tlb_type == hypervisor) { if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1) cap |= AV_SPARC_ASI_BLK_INIT; if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || - sun4v_chip_type == SUN4V_CHIP_NIAGARA3) + sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA5) cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 | AV_SPARC_ASI_BLK_INIT | AV_SPARC_POPC); - if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3) + if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA5) cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC | AV_SPARC_FMAF); } diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 75fad425e249..2caa556db86d 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -29,6 +29,8 @@ #include <asm/visasm.h> #include <asm/compat_signal.h> +#include "sigutil.h" + #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) /* This magic should be in g_upper[0] for all upper parts @@ -44,14 +46,14 @@ typedef struct { struct signal_frame32 { struct sparc_stackf32 ss; __siginfo32_t info; - /* __siginfo_fpu32_t * */ u32 fpu_save; + /* __siginfo_fpu_t * */ u32 fpu_save; unsigned int insns[2]; unsigned int extramask[_COMPAT_NSIG_WORDS - 1]; unsigned int extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */ /* Only valid if (info.si_regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */ siginfo_extra_v8plus_t v8plus; - __siginfo_fpu_t fpu_state; -}; + /* __siginfo_rwin_t * */u32 rwin_save; +} __attribute__((aligned(8))); typedef struct compat_siginfo{ int si_signo; @@ -110,18 +112,14 @@ struct rt_signal_frame32 { compat_siginfo_t info; struct pt_regs32 regs; compat_sigset_t mask; - /* __siginfo_fpu32_t * */ u32 fpu_save; + /* __siginfo_fpu_t * */ u32 fpu_save; unsigned int insns[2]; stack_t32 stack; unsigned int extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */ /* Only valid if (regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */ siginfo_extra_v8plus_t v8plus; - __siginfo_fpu_t fpu_state; -}; - -/* Align macros */ -#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 15) & (~15))) -#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 15) & (~15))) + /* __siginfo_rwin_t * */u32 rwin_save; +} __attribute__((aligned(8))); int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { @@ -192,30 +190,13 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) return 0; } -static int restore_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err; - - err = __get_user(fprs, &fpu->si_fprs); - fprs_write(0); - regs->tstate &= ~TSTATE_PEF; - if (fprs & FPRS_DL) - err |= copy_from_user(fpregs, &fpu->si_float_regs[0], (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], (sizeof(unsigned int) * 32)); - err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr); - current_thread_info()->fpsaved[0] |= fprs; - return err; -} - void do_sigreturn32(struct pt_regs *regs) { struct signal_frame32 __user *sf; + compat_uptr_t fpu_save; + compat_uptr_t rwin_save; unsigned int psr; - unsigned pc, npc, fpu_save; + unsigned pc, npc; sigset_t set; unsigned seta[_COMPAT_NSIG_WORDS]; int err, i; @@ -273,8 +254,13 @@ void do_sigreturn32(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) - err |= restore_fpu_state32(regs, &sf->fpu_state); + if (!err && fpu_save) + err |= restore_fpu_state(regs, compat_ptr(fpu_save)); + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(compat_ptr(rwin_save))) + goto segv; + } err |= __get_user(seta[0], &sf->info.si_mask); err |= copy_from_user(seta+1, &sf->extramask, (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int)); @@ -287,10 +273,7 @@ void do_sigreturn32(struct pt_regs *regs) case 1: set.sig[0] = seta[0] + (((long)seta[1]) << 32); } sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); return; segv: @@ -300,7 +283,9 @@ segv: asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) { struct rt_signal_frame32 __user *sf; - unsigned int psr, pc, npc, fpu_save, u_ss_sp; + unsigned int psr, pc, npc, u_ss_sp; + compat_uptr_t fpu_save; + compat_uptr_t rwin_save; mm_segment_t old_fs; sigset_t set; compat_sigset_t seta; @@ -359,8 +344,8 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) - err |= restore_fpu_state32(regs, &sf->fpu_state); + if (!err && fpu_save) + err |= restore_fpu_state(regs, compat_ptr(fpu_save)); err |= copy_from_user(&seta, &sf->mask, sizeof(compat_sigset_t)); err |= __get_user(u_ss_sp, &sf->stack.ss_sp); st.ss_sp = compat_ptr(u_ss_sp); @@ -376,6 +361,12 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) do_sigaltstack((stack_t __user *) &st, NULL, (unsigned long)sf); set_fs(old_fs); + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(compat_ptr(rwin_save))) + goto segv; + } + switch (_NSIG_WORDS) { case 4: set.sig[3] = seta.sig[6] + (((long)seta.sig[7]) << 32); case 3: set.sig[2] = seta.sig[4] + (((long)seta.sig[5]) << 32); @@ -383,10 +374,7 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) case 1: set.sig[0] = seta.sig[0] + (((long)seta.sig[1]) << 32); } sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); return; segv: force_sig(SIGSEGV, current); @@ -433,26 +421,6 @@ static void __user *get_sigframe(struct sigaction *sa, struct pt_regs *regs, uns return (void __user *) sp; } -static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err = 0; - - fprs = current_thread_info()->fpsaved[0]; - if (fprs & FPRS_DL) - err |= copy_to_user(&fpu->si_float_regs[0], fpregs, - (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16, - (sizeof(unsigned int) * 32)); - err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr); - err |= __put_user(fprs, &fpu->si_fprs); - - return err; -} - /* The I-cache flush instruction only works in the primary ASI, which * right now is the nucleus, aka. kernel space. * @@ -515,18 +483,23 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset) { struct signal_frame32 __user *sf; + int i, err, wsaved; + void __user *tail; int sigframe_size; u32 psr; - int i, err; unsigned int seta[_COMPAT_NSIG_WORDS]; /* 1. Make sure everything is clean */ synchronize_user_stack(); save_and_clear_fpu(); - sigframe_size = SF_ALIGNEDSZ; - if (!(current_thread_info()->fpsaved[0] & FPRS_FEF)) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = get_thread_wsaved(); + + sigframe_size = sizeof(*sf); + if (current_thread_info()->fpsaved[0] & FPRS_FEF) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct signal_frame32 __user *) get_sigframe(&ka->sa, regs, sigframe_size); @@ -534,8 +507,7 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, if (invalid_frame_pointer(sf, sigframe_size)) goto sigill; - if (get_thread_wsaved() != 0) - goto sigill; + tail = (sf + 1); /* 2. Save the current process state */ if (test_thread_flag(TIF_32BIT)) { @@ -560,11 +532,22 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, &sf->v8plus.asi); if (psr & PSR_EF) { - err |= save_fpu_state32(regs, &sf->fpu_state); - err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user((u64)fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user((u64)rwp, &sf->rwin_save); + set_thread_wsaved(0); + } else { + err |= __put_user(0, &sf->rwin_save); + } switch (_NSIG_WORDS) { case 4: seta[7] = (oldset->sig[3] >> 32); @@ -580,10 +563,21 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, err |= __copy_to_user(sf->extramask, seta + 1, (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int)); - err |= copy_in_user((u32 __user *)sf, - (u32 __user *)(regs->u_regs[UREG_FP]), - sizeof(struct reg_window32)); - + if (!wsaved) { + err |= copy_in_user((u32 __user *)sf, + (u32 __user *)(regs->u_regs[UREG_FP]), + sizeof(struct reg_window32)); + } else { + struct reg_window *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + for (i = 0; i < 8; i++) + err |= __put_user(rp->locals[i], &sf->ss.locals[i]); + for (i = 0; i < 6; i++) + err |= __put_user(rp->ins[i], &sf->ss.ins[i]); + err |= __put_user(rp->ins[6], &sf->ss.fp); + err |= __put_user(rp->ins[7], &sf->ss.callers_pc); + } if (err) goto sigsegv; @@ -613,7 +607,6 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(0x91d02010, &sf->insns[1]); /*t 0x10*/ if (err) goto sigsegv; - flush_signal_insns(address); } return 0; @@ -632,18 +625,23 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, siginfo_t *info) { struct rt_signal_frame32 __user *sf; + int i, err, wsaved; + void __user *tail; int sigframe_size; u32 psr; - int i, err; compat_sigset_t seta; /* 1. Make sure everything is clean */ synchronize_user_stack(); save_and_clear_fpu(); - sigframe_size = RT_ALIGNEDSZ; - if (!(current_thread_info()->fpsaved[0] & FPRS_FEF)) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = get_thread_wsaved(); + + sigframe_size = sizeof(*sf); + if (current_thread_info()->fpsaved[0] & FPRS_FEF) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct rt_signal_frame32 __user *) get_sigframe(&ka->sa, regs, sigframe_size); @@ -651,8 +649,7 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, if (invalid_frame_pointer(sf, sigframe_size)) goto sigill; - if (get_thread_wsaved() != 0) - goto sigill; + tail = (sf + 1); /* 2. Save the current process state */ if (test_thread_flag(TIF_32BIT)) { @@ -677,11 +674,22 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, &sf->v8plus.asi); if (psr & PSR_EF) { - err |= save_fpu_state32(regs, &sf->fpu_state); - err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user((u64)fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user((u64)rwp, &sf->rwin_save); + set_thread_wsaved(0); + } else { + err |= __put_user(0, &sf->rwin_save); + } /* Update the siginfo structure. */ err |= copy_siginfo_to_user32(&sf->info, info); @@ -703,9 +711,21 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, } err |= __copy_to_user(&sf->mask, &seta, sizeof(compat_sigset_t)); - err |= copy_in_user((u32 __user *)sf, - (u32 __user *)(regs->u_regs[UREG_FP]), - sizeof(struct reg_window32)); + if (!wsaved) { + err |= copy_in_user((u32 __user *)sf, + (u32 __user *)(regs->u_regs[UREG_FP]), + sizeof(struct reg_window32)); + } else { + struct reg_window *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + for (i = 0; i < 8; i++) + err |= __put_user(rp->locals[i], &sf->ss.locals[i]); + for (i = 0; i < 6; i++) + err |= __put_user(rp->ins[i], &sf->ss.ins[i]); + err |= __put_user(rp->ins[6], &sf->ss.fp); + err |= __put_user(rp->ins[7], &sf->ss.callers_pc); + } if (err) goto sigsegv; @@ -756,6 +776,7 @@ static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { + sigset_t blocked; int err; if (ka->sa.sa_flags & SA_SIGINFO) @@ -766,12 +787,10 @@ static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka, if (err) return err; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NOMASK)) - sigaddset(¤t->blocked,signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + sigaddset(&blocked, signr); + set_current_blocked(&blocked); tracehook_signal_handler(signr, info, ka, regs, 0); @@ -855,7 +874,7 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs, */ if (current_thread_info()->status & TS_RESTORE_SIGMASK) { current_thread_info()->status &= ~TS_RESTORE_SIGMASK; - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + set_current_blocked(¤t->saved_sigmask); } } diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 5e5c5fd03783..8ce247ac04cc 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -26,6 +26,8 @@ #include <asm/pgtable.h> #include <asm/cacheflush.h> /* flush_sig_insns */ +#include "sigutil.h" + #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) extern void fpsave(unsigned long *fpregs, unsigned long *fsr, @@ -39,8 +41,8 @@ struct signal_frame { unsigned long insns[2] __attribute__ ((aligned (8))); unsigned int extramask[_NSIG_WORDS - 1]; unsigned int extra_size; /* Should be 0 */ - __siginfo_fpu_t fpu_state; -}; + __siginfo_rwin_t __user *rwin_save; +} __attribute__((aligned(8))); struct rt_signal_frame { struct sparc_stackf ss; @@ -51,8 +53,8 @@ struct rt_signal_frame { unsigned int insns[2]; stack_t stack; unsigned int extra_size; /* Should be 0 */ - __siginfo_fpu_t fpu_state; -}; + __siginfo_rwin_t __user *rwin_save; +} __attribute__((aligned(8))); /* Align macros */ #define SF_ALIGNEDSZ (((sizeof(struct signal_frame) + 7) & (~7))) @@ -60,12 +62,13 @@ struct rt_signal_frame { static int _sigpause_common(old_sigset_t set) { - set &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); + sigset_t blocked; + current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, set); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + + set &= _BLOCKABLE; + siginitset(&blocked, set); + set_current_blocked(&blocked); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -79,43 +82,13 @@ asmlinkage int sys_sigsuspend(old_sigset_t set) return _sigpause_common(set); } -static inline int -restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - int err; -#ifdef CONFIG_SMP - if (test_tsk_thread_flag(current, TIF_USEDFPU)) - regs->psr &= ~PSR_EF; -#else - if (current == last_task_used_math) { - last_task_used_math = NULL; - regs->psr &= ~PSR_EF; - } -#endif - set_used_math(); - clear_tsk_thread_flag(current, TIF_USEDFPU); - - if (!access_ok(VERIFY_READ, fpu, sizeof(*fpu))) - return -EFAULT; - - err = __copy_from_user(¤t->thread.float_regs[0], &fpu->si_float_regs[0], - (sizeof(unsigned long) * 32)); - err |= __get_user(current->thread.fsr, &fpu->si_fsr); - err |= __get_user(current->thread.fpqdepth, &fpu->si_fpqdepth); - if (current->thread.fpqdepth != 0) - err |= __copy_from_user(¤t->thread.fpqueue[0], - &fpu->si_fpqueue[0], - ((sizeof(unsigned long) + - (sizeof(unsigned long *)))*16)); - return err; -} - asmlinkage void do_sigreturn(struct pt_regs *regs) { struct signal_frame __user *sf; unsigned long up_psr, pc, npc; sigset_t set; __siginfo_fpu_t __user *fpu_save; + __siginfo_rwin_t __user *rwin_save; int err; /* Always make any pending restarted system calls return -EINTR */ @@ -150,9 +123,11 @@ asmlinkage void do_sigreturn(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) err |= restore_fpu_state(regs, fpu_save); + err |= __get_user(rwin_save, &sf->rwin_save); + if (rwin_save) + err |= restore_rwin_state(rwin_save); /* This is pretty much atomic, no amount locking would prevent * the races which exist anyways. @@ -165,10 +140,7 @@ asmlinkage void do_sigreturn(struct pt_regs *regs) goto segv_and_exit; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); return; segv_and_exit: @@ -180,6 +152,7 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) struct rt_signal_frame __user *sf; unsigned int psr, pc, npc; __siginfo_fpu_t __user *fpu_save; + __siginfo_rwin_t __user *rwin_save; mm_segment_t old_fs; sigset_t set; stack_t st; @@ -207,8 +180,7 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - - if (fpu_save) + if (!err && fpu_save) err |= restore_fpu_state(regs, fpu_save); err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t)); @@ -228,11 +200,14 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) do_sigaltstack((const stack_t __user *) &st, NULL, (unsigned long)sf); set_fs(old_fs); + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(rwin_save)) + goto segv; + } + sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); return; segv: force_sig(SIGSEGV, current); @@ -280,53 +255,23 @@ static inline void __user *get_sigframe(struct sigaction *sa, struct pt_regs *re return (void __user *) sp; } -static inline int -save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - int err = 0; -#ifdef CONFIG_SMP - if (test_tsk_thread_flag(current, TIF_USEDFPU)) { - put_psr(get_psr() | PSR_EF); - fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, - ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); - regs->psr &= ~(PSR_EF); - clear_tsk_thread_flag(current, TIF_USEDFPU); - } -#else - if (current == last_task_used_math) { - put_psr(get_psr() | PSR_EF); - fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, - ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); - last_task_used_math = NULL; - regs->psr &= ~(PSR_EF); - } -#endif - err |= __copy_to_user(&fpu->si_float_regs[0], - ¤t->thread.float_regs[0], - (sizeof(unsigned long) * 32)); - err |= __put_user(current->thread.fsr, &fpu->si_fsr); - err |= __put_user(current->thread.fpqdepth, &fpu->si_fpqdepth); - if (current->thread.fpqdepth != 0) - err |= __copy_to_user(&fpu->si_fpqueue[0], - ¤t->thread.fpqueue[0], - ((sizeof(unsigned long) + - (sizeof(unsigned long *)))*16)); - clear_used_math(); - return err; -} - static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset) { struct signal_frame __user *sf; - int sigframe_size, err; + int sigframe_size, err, wsaved; + void __user *tail; /* 1. Make sure everything is clean */ synchronize_user_stack(); - sigframe_size = SF_ALIGNEDSZ; - if (!used_math()) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = current_thread_info()->w_saved; + + sigframe_size = sizeof(*sf); + if (used_math()) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct signal_frame __user *) get_sigframe(&ka->sa, regs, sigframe_size); @@ -334,8 +279,7 @@ static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs, if (invalid_frame_pointer(sf, sigframe_size)) goto sigill_and_return; - if (current_thread_info()->w_saved != 0) - goto sigill_and_return; + tail = sf + 1; /* 2. Save the current process state */ err = __copy_to_user(&sf->info.si_regs, regs, sizeof(struct pt_regs)); @@ -343,17 +287,34 @@ static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(0, &sf->extra_size); if (used_math()) { - err |= save_fpu_state(regs, &sf->fpu_state); - err |= __put_user(&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user(fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user(rwp, &sf->rwin_save); + } else { + err |= __put_user(0, &sf->rwin_save); + } err |= __put_user(oldset->sig[0], &sf->info.si_mask); err |= __copy_to_user(sf->extramask, &oldset->sig[1], (_NSIG_WORDS - 1) * sizeof(unsigned int)); - err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], - sizeof(struct reg_window32)); + if (!wsaved) { + err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], + sizeof(struct reg_window32)); + } else { + struct reg_window32 *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + err |= __copy_to_user(sf, rp, sizeof(struct reg_window32)); + } if (err) goto sigsegv; @@ -399,21 +360,24 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset, siginfo_t *info) { struct rt_signal_frame __user *sf; - int sigframe_size; + int sigframe_size, wsaved; + void __user *tail; unsigned int psr; int err; synchronize_user_stack(); - sigframe_size = RT_ALIGNEDSZ; - if (!used_math()) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = current_thread_info()->w_saved; + sigframe_size = sizeof(*sf); + if (used_math()) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct rt_signal_frame __user *) get_sigframe(&ka->sa, regs, sigframe_size); if (invalid_frame_pointer(sf, sigframe_size)) goto sigill; - if (current_thread_info()->w_saved != 0) - goto sigill; + tail = sf + 1; err = __put_user(regs->pc, &sf->regs.pc); err |= __put_user(regs->npc, &sf->regs.npc); err |= __put_user(regs->y, &sf->regs.y); @@ -425,11 +389,21 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(0, &sf->extra_size); if (psr & PSR_EF) { - err |= save_fpu_state(regs, &sf->fpu_state); - err |= __put_user(&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user(fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user(rwp, &sf->rwin_save); + } else { + err |= __put_user(0, &sf->rwin_save); + } err |= __copy_to_user(&sf->mask, &oldset->sig[0], sizeof(sigset_t)); /* Setup sigaltstack */ @@ -437,8 +411,15 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &sf->stack.ss_flags); err |= __put_user(current->sas_ss_size, &sf->stack.ss_size); - err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], - sizeof(struct reg_window32)); + if (!wsaved) { + err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], + sizeof(struct reg_window32)); + } else { + struct reg_window32 *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + err |= __copy_to_user(sf, rp, sizeof(struct reg_window32)); + } err |= copy_siginfo_to_user(&sf->info, info); @@ -484,6 +465,7 @@ static inline int handle_signal(unsigned long signr, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { + sigset_t blocked; int err; if (ka->sa.sa_flags & SA_SIGINFO) @@ -494,12 +476,10 @@ handle_signal(unsigned long signr, struct k_sigaction *ka, if (err) return err; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NOMASK)) - sigaddset(¤t->blocked, signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + sigaddset(&blocked, signr); + set_current_blocked(&blocked); tracehook_signal_handler(signr, info, ka, regs, 0); @@ -595,7 +575,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) { clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + set_current_blocked(¤t->saved_sigmask); } } diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 006fe4515886..a2b81598d905 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -34,6 +34,7 @@ #include "entry.h" #include "systbls.h" +#include "sigutil.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -69,10 +70,7 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs) goto do_sigsegv; } sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); } if (test_thread_flag(TIF_32BIT)) { pc &= 0xffffffff; @@ -236,17 +234,18 @@ struct rt_signal_frame { __siginfo_fpu_t __user *fpu_save; stack_t stack; sigset_t mask; - __siginfo_fpu_t fpu_state; + __siginfo_rwin_t *rwin_save; }; static long _sigpause_common(old_sigset_t set) { - set &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); + sigset_t blocked; + current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, set); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + + set &= _BLOCKABLE; + siginitset(&blocked, set); + set_current_blocked(&blocked); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -266,33 +265,12 @@ asmlinkage long sys_sigsuspend(old_sigset_t set) return _sigpause_common(set); } -static inline int -restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err; - - err = __get_user(fprs, &fpu->si_fprs); - fprs_write(0); - regs->tstate &= ~TSTATE_PEF; - if (fprs & FPRS_DL) - err |= copy_from_user(fpregs, &fpu->si_float_regs[0], - (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], - (sizeof(unsigned int) * 32)); - err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr); - current_thread_info()->fpsaved[0] |= fprs; - return err; -} - void do_rt_sigreturn(struct pt_regs *regs) { struct rt_signal_frame __user *sf; unsigned long tpc, tnpc, tstate; __siginfo_fpu_t __user *fpu_save; + __siginfo_rwin_t __user *rwin_save; sigset_t set; int err; @@ -325,8 +303,8 @@ void do_rt_sigreturn(struct pt_regs *regs) regs->tstate |= (tstate & (TSTATE_ASI | TSTATE_ICC | TSTATE_XCC)); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) - err |= restore_fpu_state(regs, &sf->fpu_state); + if (!err && fpu_save) + err |= restore_fpu_state(regs, fpu_save); err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t)); err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf); @@ -334,6 +312,12 @@ void do_rt_sigreturn(struct pt_regs *regs) if (err) goto segv; + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(rwin_save)) + goto segv; + } + regs->tpc = tpc; regs->tnpc = tnpc; @@ -341,44 +325,20 @@ void do_rt_sigreturn(struct pt_regs *regs) pt_regs_clear_syscall(regs); sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); return; segv: force_sig(SIGSEGV, current); } /* Checks if the fp is valid */ -static int invalid_frame_pointer(void __user *fp, int fplen) +static int invalid_frame_pointer(void __user *fp) { if (((unsigned long) fp) & 15) return 1; return 0; } -static inline int -save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err = 0; - - fprs = current_thread_info()->fpsaved[0]; - if (fprs & FPRS_DL) - err |= copy_to_user(&fpu->si_float_regs[0], fpregs, - (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16, - (sizeof(unsigned int) * 32)); - err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr); - err |= __put_user(fprs, &fpu->si_fprs); - - return err; -} - static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, unsigned long framesize) { unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS; @@ -414,34 +374,48 @@ setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset, siginfo_t *info) { struct rt_signal_frame __user *sf; - int sigframe_size, err; + int wsaved, err, sf_size; + void __user *tail; /* 1. Make sure everything is clean */ synchronize_user_stack(); save_and_clear_fpu(); - sigframe_size = sizeof(struct rt_signal_frame); - if (!(current_thread_info()->fpsaved[0] & FPRS_FEF)) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = get_thread_wsaved(); + sf_size = sizeof(struct rt_signal_frame); + if (current_thread_info()->fpsaved[0] & FPRS_FEF) + sf_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sf_size += sizeof(__siginfo_rwin_t); sf = (struct rt_signal_frame __user *) - get_sigframe(ka, regs, sigframe_size); - - if (invalid_frame_pointer (sf, sigframe_size)) - goto sigill; + get_sigframe(ka, regs, sf_size); - if (get_thread_wsaved() != 0) + if (invalid_frame_pointer (sf)) goto sigill; + tail = (sf + 1); + /* 2. Save the current process state */ err = copy_to_user(&sf->regs, regs, sizeof (*regs)); if (current_thread_info()->fpsaved[0] & FPRS_FEF) { - err |= save_fpu_state(regs, &sf->fpu_state); - err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fpu_save = tail; + tail += sizeof(__siginfo_fpu_t); + err |= save_fpu_state(regs, fpu_save); + err |= __put_user((u64)fpu_save, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwin_save = tail; + tail += sizeof(__siginfo_rwin_t); + err |= save_rwin_state(wsaved, rwin_save); + err |= __put_user((u64)rwin_save, &sf->rwin_save); + set_thread_wsaved(0); + } else { + err |= __put_user(0, &sf->rwin_save); + } /* Setup sigaltstack */ err |= __put_user(current->sas_ss_sp, &sf->stack.ss_sp); @@ -450,10 +424,17 @@ setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= copy_to_user(&sf->mask, oldset, sizeof(sigset_t)); - err |= copy_in_user((u64 __user *)sf, - (u64 __user *)(regs->u_regs[UREG_FP]+STACK_BIAS), - sizeof(struct reg_window)); + if (!wsaved) { + err |= copy_in_user((u64 __user *)sf, + (u64 __user *)(regs->u_regs[UREG_FP] + + STACK_BIAS), + sizeof(struct reg_window)); + } else { + struct reg_window *rp; + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + err |= copy_to_user(sf, rp, sizeof(struct reg_window)); + } if (info) err |= copy_siginfo_to_user(&sf->info, info); else { @@ -498,18 +479,17 @@ static inline int handle_signal(unsigned long signr, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { + sigset_t blocked; int err; err = setup_rt_frame(ka, regs, signr, oldset, (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL); if (err) return err; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NOMASK)) - sigaddset(¤t->blocked,signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + sigaddset(&blocked, signr); + set_current_blocked(&blocked); tracehook_signal_handler(signr, info, ka, regs, 0); @@ -615,7 +595,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) */ if (current_thread_info()->status & TS_RESTORE_SIGMASK) { current_thread_info()->status &= ~TS_RESTORE_SIGMASK; - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + set_current_blocked(¤t->saved_sigmask); } } diff --git a/arch/sparc/kernel/sigutil.h b/arch/sparc/kernel/sigutil.h new file mode 100644 index 000000000000..d223aa432bb6 --- /dev/null +++ b/arch/sparc/kernel/sigutil.h @@ -0,0 +1,9 @@ +#ifndef _SIGUTIL_H +#define _SIGUTIL_H + +int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu); +int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu); +int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin); +int restore_rwin_state(__siginfo_rwin_t __user *rp); + +#endif /* _SIGUTIL_H */ diff --git a/arch/sparc/kernel/sigutil_32.c b/arch/sparc/kernel/sigutil_32.c new file mode 100644 index 000000000000..35c7897b009a --- /dev/null +++ b/arch/sparc/kernel/sigutil_32.c @@ -0,0 +1,120 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/thread_info.h> +#include <linux/uaccess.h> +#include <linux/sched.h> + +#include <asm/sigcontext.h> +#include <asm/fpumacro.h> +#include <asm/ptrace.h> + +#include "sigutil.h" + +int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + int err = 0; +#ifdef CONFIG_SMP + if (test_tsk_thread_flag(current, TIF_USEDFPU)) { + put_psr(get_psr() | PSR_EF); + fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, + ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); + regs->psr &= ~(PSR_EF); + clear_tsk_thread_flag(current, TIF_USEDFPU); + } +#else + if (current == last_task_used_math) { + put_psr(get_psr() | PSR_EF); + fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, + ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); + last_task_used_math = NULL; + regs->psr &= ~(PSR_EF); + } +#endif + err |= __copy_to_user(&fpu->si_float_regs[0], + ¤t->thread.float_regs[0], + (sizeof(unsigned long) * 32)); + err |= __put_user(current->thread.fsr, &fpu->si_fsr); + err |= __put_user(current->thread.fpqdepth, &fpu->si_fpqdepth); + if (current->thread.fpqdepth != 0) + err |= __copy_to_user(&fpu->si_fpqueue[0], + ¤t->thread.fpqueue[0], + ((sizeof(unsigned long) + + (sizeof(unsigned long *)))*16)); + clear_used_math(); + return err; +} + +int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + int err; +#ifdef CONFIG_SMP + if (test_tsk_thread_flag(current, TIF_USEDFPU)) + regs->psr &= ~PSR_EF; +#else + if (current == last_task_used_math) { + last_task_used_math = NULL; + regs->psr &= ~PSR_EF; + } +#endif + set_used_math(); + clear_tsk_thread_flag(current, TIF_USEDFPU); + + if (!access_ok(VERIFY_READ, fpu, sizeof(*fpu))) + return -EFAULT; + + err = __copy_from_user(¤t->thread.float_regs[0], &fpu->si_float_regs[0], + (sizeof(unsigned long) * 32)); + err |= __get_user(current->thread.fsr, &fpu->si_fsr); + err |= __get_user(current->thread.fpqdepth, &fpu->si_fpqdepth); + if (current->thread.fpqdepth != 0) + err |= __copy_from_user(¤t->thread.fpqueue[0], + &fpu->si_fpqueue[0], + ((sizeof(unsigned long) + + (sizeof(unsigned long *)))*16)); + return err; +} + +int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin) +{ + int i, err = __put_user(wsaved, &rwin->wsaved); + + for (i = 0; i < wsaved; i++) { + struct reg_window32 *rp; + unsigned long fp; + + rp = ¤t_thread_info()->reg_window[i]; + fp = current_thread_info()->rwbuf_stkptrs[i]; + err |= copy_to_user(&rwin->reg_window[i], rp, + sizeof(struct reg_window32)); + err |= __put_user(fp, &rwin->rwbuf_stkptrs[i]); + } + return err; +} + +int restore_rwin_state(__siginfo_rwin_t __user *rp) +{ + struct thread_info *t = current_thread_info(); + int i, wsaved, err; + + __get_user(wsaved, &rp->wsaved); + if (wsaved > NSWINS) + return -EFAULT; + + err = 0; + for (i = 0; i < wsaved; i++) { + err |= copy_from_user(&t->reg_window[i], + &rp->reg_window[i], + sizeof(struct reg_window32)); + err |= __get_user(t->rwbuf_stkptrs[i], + &rp->rwbuf_stkptrs[i]); + } + if (err) + return err; + + t->w_saved = wsaved; + synchronize_user_stack(); + if (t->w_saved) + return -EFAULT; + return 0; + +} diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c new file mode 100644 index 000000000000..e7dc508c38eb --- /dev/null +++ b/arch/sparc/kernel/sigutil_64.c @@ -0,0 +1,93 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/thread_info.h> +#include <linux/uaccess.h> + +#include <asm/sigcontext.h> +#include <asm/fpumacro.h> +#include <asm/ptrace.h> + +#include "sigutil.h" + +int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + unsigned long *fpregs = current_thread_info()->fpregs; + unsigned long fprs; + int err = 0; + + fprs = current_thread_info()->fpsaved[0]; + if (fprs & FPRS_DL) + err |= copy_to_user(&fpu->si_float_regs[0], fpregs, + (sizeof(unsigned int) * 32)); + if (fprs & FPRS_DU) + err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16, + (sizeof(unsigned int) * 32)); + err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr); + err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr); + err |= __put_user(fprs, &fpu->si_fprs); + + return err; +} + +int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + unsigned long *fpregs = current_thread_info()->fpregs; + unsigned long fprs; + int err; + + err = __get_user(fprs, &fpu->si_fprs); + fprs_write(0); + regs->tstate &= ~TSTATE_PEF; + if (fprs & FPRS_DL) + err |= copy_from_user(fpregs, &fpu->si_float_regs[0], + (sizeof(unsigned int) * 32)); + if (fprs & FPRS_DU) + err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], + (sizeof(unsigned int) * 32)); + err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr); + err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr); + current_thread_info()->fpsaved[0] |= fprs; + return err; +} + +int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin) +{ + int i, err = __put_user(wsaved, &rwin->wsaved); + + for (i = 0; i < wsaved; i++) { + struct reg_window *rp = ¤t_thread_info()->reg_window[i]; + unsigned long fp = current_thread_info()->rwbuf_stkptrs[i]; + + err |= copy_to_user(&rwin->reg_window[i], rp, + sizeof(struct reg_window)); + err |= __put_user(fp, &rwin->rwbuf_stkptrs[i]); + } + return err; +} + +int restore_rwin_state(__siginfo_rwin_t __user *rp) +{ + struct thread_info *t = current_thread_info(); + int i, wsaved, err; + + __get_user(wsaved, &rp->wsaved); + if (wsaved > NSWINS) + return -EFAULT; + + err = 0; + for (i = 0; i < wsaved; i++) { + err |= copy_from_user(&t->reg_window[i], + &rp->reg_window[i], + sizeof(struct reg_window)); + err |= __get_user(t->rwbuf_stkptrs[i], + &rp->rwbuf_stkptrs[i]); + } + if (err) + return err; + + set_thread_wsaved(wsaved); + synchronize_user_stack(); + if (get_thread_wsaved()) + return -EFAULT; + return 0; +} diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index 44e5faf1ad5f..d97f3eb72e06 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -81,7 +81,6 @@ SIGN2(sys32_fadvise64, compat_sys_fadvise64, %o0, %o4) SIGN2(sys32_fadvise64_64, compat_sys_fadvise64_64, %o0, %o5) SIGN2(sys32_bdflush, sys_bdflush, %o0, %o1) SIGN1(sys32_mlockall, sys_mlockall, %o0) -SIGN1(sys32_nfsservctl, compat_sys_nfsservctl, %o0) SIGN1(sys32_clock_nanosleep, compat_sys_clock_nanosleep, %o1) SIGN1(sys32_timer_settime, compat_sys_timer_settime, %o1) SIGN1(sys32_io_submit, compat_sys_io_submit, %o1) diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 6e492d59f6b1..09d8ec454450 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -67,7 +67,7 @@ sys_call_table: /*235*/ .long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler /*245*/ .long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_ni_syscall /*255*/ .long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun /*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index f566518483b5..edbec45d4688 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -68,7 +68,7 @@ sys_call_table32: .word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall /*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler .word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep -/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl +/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys_nis_syscall .word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep /*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy @@ -145,7 +145,7 @@ sys_call_table: .word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler .word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nis_syscall .word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 581531dbc8b5..8e073d802139 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -511,6 +511,11 @@ static void __init read_obp_translations(void) for (i = 0; i < prom_trans_ents; i++) prom_trans[i].data &= ~0x0003fe0000000000UL; } + + /* Force execute bit on. */ + for (i = 0; i < prom_trans_ents; i++) + prom_trans[i].data |= (tlb_type == hypervisor ? + _PAGE_EXEC_4V : _PAGE_EXEC_4U); } static void __init hypervisor_tlb_lock(unsigned long vaddr, diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c index e485a6804998..13c2169822a8 100644 --- a/arch/sparc/mm/leon_mm.c +++ b/arch/sparc/mm/leon_mm.c @@ -162,7 +162,7 @@ ready: printk(KERN_INFO "swprobe: padde %x\n", paddr_calc); if (paddr) *paddr = paddr_calc; - return paddrbase; + return pte; } void leon_flush_icache_all(void) diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index b30f71ac0d06..70a0de46cd1b 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -46,9 +46,6 @@ config NEED_PER_CPU_PAGE_FIRST_CHUNK config SYS_SUPPORTS_HUGETLBFS def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS def_bool y diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig index 2ad73fb707b9..dafdbbae1124 100644 --- a/arch/tile/configs/tilegx_defconfig +++ b/arch/tile/configs/tilegx_defconfig @@ -11,7 +11,6 @@ CONFIG_HAVE_ARCH_ALLOC_REMAP=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_DEFAULT_MIGRATION_COST=10000000 diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig index f58dc362b944..6f05f969b564 100644 --- a/arch/tile/configs/tilepro_defconfig +++ b/arch/tile/configs/tilepro_defconfig @@ -11,7 +11,6 @@ CONFIG_HAVE_ARCH_ALLOC_REMAP=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_DEFAULT_MIGRATION_COST=10000000 diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index fc94607f0bd5..aecc8ed5f39b 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -21,7 +21,7 @@ #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/irqflags.h> -#include <linux/atomic.h> +#include <asm/atomic_32.h> #include <asm/asm-offsets.h> #include <hv/hypervisor.h> #include <arch/abi.h> diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S index 1f75a2a56101..30638042691d 100644 --- a/arch/tile/lib/atomic_asm_32.S +++ b/arch/tile/lib/atomic_asm_32.S @@ -70,7 +70,7 @@ */ #include <linux/linkage.h> -#include <linux/atomic.h> +#include <asm/atomic_32.h> #include <asm/page.h> #include <asm/processor.h> diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index d31ecf346b4e..21bebe63df66 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -10,6 +10,10 @@ config CMPXCHG_LOCAL bool default n +config CMPXCHG_DOUBLE + bool + default n + source "arch/x86/Kconfig.cpu" endmenu diff --git a/arch/um/Makefile b/arch/um/Makefile index fab8121d2b32..c0f712cc7c5f 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH) KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \ -Din6addr_loopback=kernel_in6addr_loopback \ - -Din6addr_any=kernel_in6addr_any + -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr KBUILD_AFLAGS += $(ARCH_INCLUDE) diff --git a/arch/um/defconfig b/arch/um/defconfig index 9f7634f08cf3..761f5e1a657e 100644 --- a/arch/um/defconfig +++ b/arch/um/defconfig @@ -13,7 +13,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_STACKTRACE_SUPPORT is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_IRQ_RELEASE_METHOD=y CONFIG_HZ=100 diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index d51c404239a8..364c8a15c4c3 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data) * is done under a spinlock. Checking whether the device is in use is * line->tty->count > 1, also under the spinlock. * - * tty->count serves to decide whether the device should be enabled or - * disabled on the host. If it's equal to 1, then we are doing the + * line->count serves to decide whether the device should be enabled or + * disabled on the host. If it's equal to 0, then we are doing the * first open or last close. Otherwise, open and close just return. */ @@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty) goto out_unlock; err = 0; - if (tty->count > 1) + if (line->count++) goto out_unlock; - spin_unlock(&line->count_lock); - + BUG_ON(tty->driver_data); tty->driver_data = line; line->tty = tty; + spin_unlock(&line->count_lock); err = enable_chan(line); - if (err) + if (err) /* line_close() will be called by our caller */ return err; INIT_DELAYED_WORK(&line->task, line_timer_cb); @@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty) chan_window_size(&line->chan_list, &tty->winsize.ws_row, &tty->winsize.ws_col); - return err; + return 0; out_unlock: spin_unlock(&line->count_lock); @@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp) flush_buffer(line); spin_lock(&line->count_lock); - if (!line->valid) - goto out_unlock; + BUG_ON(!line->valid); - if (tty->count > 1) + if (--line->count) goto out_unlock; - spin_unlock(&line->count_lock); - line->tty = NULL; tty->driver_data = NULL; + spin_unlock(&line->count_lock); + if (line->sigio) { unregister_winch(tty); line->sigio = 0; @@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio, spin_lock(&line->count_lock); - if (line->tty != NULL) { + if (line->count) { *error_out = "Device is already open"; goto out; } @@ -722,41 +721,53 @@ struct winch { int pid; struct tty_struct *tty; unsigned long stack; + struct work_struct work; }; -static void free_winch(struct winch *winch, int free_irq_ok) +static void __free_winch(struct work_struct *work) { - if (free_irq_ok) - free_irq(WINCH_IRQ, winch); - - list_del(&winch->list); + struct winch *winch = container_of(work, struct winch, work); + free_irq(WINCH_IRQ, winch); if (winch->pid != -1) os_kill_process(winch->pid, 1); - if (winch->fd != -1) - os_close_file(winch->fd); if (winch->stack != 0) free_stack(winch->stack, 0); kfree(winch); } +static void free_winch(struct winch *winch) +{ + int fd = winch->fd; + winch->fd = -1; + if (fd != -1) + os_close_file(fd); + list_del(&winch->list); + __free_winch(&winch->work); +} + static irqreturn_t winch_interrupt(int irq, void *data) { struct winch *winch = data; struct tty_struct *tty; struct line *line; + int fd = winch->fd; int err; char c; - if (winch->fd != -1) { - err = generic_read(winch->fd, &c, NULL); + if (fd != -1) { + err = generic_read(fd, &c, NULL); if (err < 0) { if (err != -EAGAIN) { + winch->fd = -1; + list_del(&winch->list); + os_close_file(fd); printk(KERN_ERR "winch_interrupt : " "read failed, errno = %d\n", -err); printk(KERN_ERR "fd %d is losing SIGWINCH " "support\n", winch->tty_fd); - free_winch(winch, 0); + INIT_WORK(&winch->work, __free_winch); + schedule_work(&winch->work); return IRQ_HANDLED; } goto out; @@ -828,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty) list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); if (winch->tty == tty) { - free_winch(winch, 1); + free_winch(winch); break; } } @@ -844,7 +855,7 @@ static void winch_cleanup(void) list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); - free_winch(winch, 1); + free_winch(winch); } spin_unlock(&winch_handler_lock); diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 22745b47c829..a492e59883a3 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -368,7 +368,7 @@ static const struct net_device_ops uml_netdev_ops = { .ndo_open = uml_net_open, .ndo_stop = uml_net_close, .ndo_start_xmit = uml_net_start_xmit, - .ndo_set_multicast_list = uml_net_set_multicast_list, + .ndo_set_rx_mode = uml_net_set_multicast_list, .ndo_tx_timeout = uml_net_tx_timeout, .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = uml_net_change_mtu, diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 8ac7146c237f..2e1de5728604 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d, err = -errno; printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", errno); + close(fd); return err; } close(fd); diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h index ae084ad1a3a0..1a7d2757fe05 100644 --- a/arch/um/include/asm/ptrace-generic.h +++ b/arch/um/include/asm/ptrace-generic.h @@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern unsigned long getreg(struct task_struct *child, int regno); extern int putreg(struct task_struct *child, int regno, unsigned long value); -extern int get_fpregs(struct user_i387_struct __user *buf, - struct task_struct *child); -extern int set_fpregs(struct user_i387_struct __user *buf, - struct task_struct *child); extern int arch_copy_tls(struct task_struct *new); extern void clear_flushed_tls(struct task_struct *task); diff --git a/arch/um/include/shared/line.h b/arch/um/include/shared/line.h index 72f4f25af247..63df3ca02ac2 100644 --- a/arch/um/include/shared/line.h +++ b/arch/um/include/shared/line.h @@ -33,6 +33,7 @@ struct line_driver { struct line { struct tty_struct *tty; spinlock_t count_lock; + unsigned long count; int valid; char *init_str; diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h index b0b4589e0ebc..f1e0aa56c52a 100644 --- a/arch/um/include/shared/registers.h +++ b/arch/um/include/shared/registers.h @@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs); extern int save_registers(int pid, struct uml_pt_regs *regs); extern int restore_registers(int pid, struct uml_pt_regs *regs); extern int init_registers(int pid); -extern void get_safe_registers(unsigned long *regs); +extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs); extern unsigned long get_thread_reg(int reg, jmp_buf *buf); extern int get_fp_registers(int pid, unsigned long *regs); extern int put_fp_registers(int pid, unsigned long *regs); diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index fab4371184f6..21c1ae7c3d75 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, arch_copy_thread(¤t->thread.arch, &p->thread.arch); } else { - get_safe_registers(p->thread.regs.regs.gp); + get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp); p->thread.request.u.thread = current->thread.request.u.thread; handler = new_thread_handler; } diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 701b672c1122..c9da32b0c707 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -50,23 +50,11 @@ long arch_ptrace(struct task_struct *child, long request, void __user *vp = p; switch (request) { - /* read word at location addr. */ - case PTRACE_PEEKTEXT: - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: ret = peek_user(child, addr, data); break; - /* write the word at location addr. */ - case PTRACE_POKETEXT: - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - /* write the word at location addr in the USER area */ case PTRACE_POKEUSR: ret = poke_user(child, addr, data); @@ -107,16 +95,6 @@ long arch_ptrace(struct task_struct *child, long request, break; } #endif -#ifdef PTRACE_GETFPREGS - case PTRACE_GETFPREGS: /* Get the child FPU state. */ - ret = get_fpregs(vp, child); - break; -#endif -#ifdef PTRACE_SETFPREGS - case PTRACE_SETFPREGS: /* Set the child FPU state. */ - ret = set_fpregs(vp, child); - break; -#endif case PTRACE_GET_THREAD_AREA: ret = ptrace_get_thread_area(child, addr, vp); break; @@ -154,12 +132,6 @@ long arch_ptrace(struct task_struct *child, long request, break; } #endif -#ifdef PTRACE_ARCH_PRCTL - case PTRACE_ARCH_PRCTL: - /* XXX Calls ptrace on the host - needs some SMP thinking */ - ret = arch_prctl(child, data, (void __user *) addr); - break; -#endif default: ret = ptrace_request(child, request, addr, data); if (ret == -EIO) diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c index 830fe6a1518a..b866b9e3bef9 100644 --- a/arch/um/os-Linux/registers.c +++ b/arch/um/os-Linux/registers.c @@ -8,6 +8,8 @@ #include <string.h> #include <sys/ptrace.h> #include "sysdep/ptrace.h" +#include "sysdep/ptrace_user.h" +#include "registers.h" int save_registers(int pid, struct uml_pt_regs *regs) { @@ -32,6 +34,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs) /* This is set once at boot time and not changed thereafter */ static unsigned long exec_regs[MAX_REG_NR]; +static unsigned long exec_fp_regs[FP_SIZE]; int init_registers(int pid) { @@ -42,10 +45,14 @@ int init_registers(int pid) return -errno; arch_init_registers(pid); + get_fp_registers(pid, exec_fp_regs); return 0; } -void get_safe_registers(unsigned long *regs) +void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) { memcpy(regs, exec_regs, sizeof(exec_regs)); + + if (fp_regs) + memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs)); } diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c index d261f170d120..e771398be5f3 100644 --- a/arch/um/os-Linux/skas/mem.c +++ b/arch/um/os-Linux/skas/mem.c @@ -39,7 +39,7 @@ static unsigned long syscall_regs[MAX_REG_NR]; static int __init init_syscall_regs(void) { - get_safe_registers(syscall_regs); + get_safe_registers(syscall_regs, NULL); syscall_regs[REGS_IP_INDEX] = STUB_CODE + ((unsigned long) &batch_syscall_stub - (unsigned long) &__syscall_stub_start); diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index d6e0a2234b86..dee0e8cf8ad0 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -373,6 +373,9 @@ void userspace(struct uml_pt_regs *regs) if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp)) fatal_sigsegv(); + if (put_fp_registers(pid, regs->fp)) + fatal_sigsegv(); + /* Now we set local_using_sysemu to be used for one loop */ local_using_sysemu = get_using_sysemu(); @@ -399,6 +402,12 @@ void userspace(struct uml_pt_regs *regs) fatal_sigsegv(); } + if (get_fp_registers(pid, regs->fp)) { + printk(UM_KERN_ERR "userspace - get_fp_registers failed, " + "errno = %d\n", errno); + fatal_sigsegv(); + } + UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */ if (WIFSTOPPED(status)) { @@ -457,10 +466,11 @@ void userspace(struct uml_pt_regs *regs) } static unsigned long thread_regs[MAX_REG_NR]; +static unsigned long thread_fp_regs[FP_SIZE]; static int __init init_thread_regs(void) { - get_safe_registers(thread_regs); + get_safe_registers(thread_regs, thread_fp_regs); /* Set parent's instruction pointer to start of clone-stub */ thread_regs[REGS_IP_INDEX] = STUB_CODE + (unsigned long) stub_clone_handler - @@ -503,6 +513,13 @@ int copy_context_skas0(unsigned long new_stack, int pid) return err; } + err = put_fp_registers(pid, thread_fp_regs); + if (err < 0) { + printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers " + "failed, pid = %d, err = %d\n", pid, err); + return err; + } + /* set a well known return code for detection of child write failure */ child_data->err = 12345678; diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h index 0273e4d09af7..5d2a59112537 100644 --- a/arch/um/sys-i386/asm/ptrace.h +++ b/arch/um/sys-i386/asm/ptrace.h @@ -42,11 +42,6 @@ */ struct user_desc; -extern int get_fpxregs(struct user_fxsr_struct __user *buf, - struct task_struct *child); -extern int set_fpxregs(struct user_fxsr_struct __user *buf, - struct task_struct *tsk); - extern int ptrace_get_thread_area(struct task_struct *child, int idx, struct user_desc __user *user_desc); diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c index d23b2d3ea384..3375c2717851 100644 --- a/arch/um/sys-i386/ptrace.c +++ b/arch/um/sys-i386/ptrace.c @@ -145,7 +145,7 @@ int peek_user(struct task_struct *child, long addr, long data) return put_user(tmp, (unsigned long __user *) data); } -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_i387_struct fpregs; @@ -161,7 +161,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) return n; } -int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_i387_struct fpregs; @@ -174,7 +174,7 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) (unsigned long *) &fpregs); } -int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) +static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_fxsr_struct fpregs; @@ -190,7 +190,7 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) return n; } -int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) +static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_fxsr_struct fpregs; @@ -206,5 +206,23 @@ int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) long subarch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data) { - return -EIO; + int ret = -EIO; + void __user *datap = (void __user *) data; + switch (request) { + case PTRACE_GETFPREGS: /* Get the child FPU state. */ + ret = get_fpregs(datap, child); + break; + case PTRACE_SETFPREGS: /* Set the child FPU state. */ + ret = set_fpregs(datap, child); + break; + case PTRACE_GETFPXREGS: /* Get the child FPU state. */ + ret = get_fpxregs(datap, child); + break; + case PTRACE_SETFPXREGS: /* Set the child FPU state. */ + ret = set_fpxregs(datap, child); + break; + default: + ret = -EIO; + } + return ret; } diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h index d50e62e07070..c398a5076111 100644 --- a/arch/um/sys-i386/shared/sysdep/ptrace.h +++ b/arch/um/sys-i386/shared/sysdep/ptrace.h @@ -53,6 +53,7 @@ extern int sysemu_supported; struct uml_pt_regs { unsigned long gp[MAX_REG_NR]; + unsigned long fp[HOST_FPX_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index f43613643cdb..4005506834fd 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -145,7 +145,7 @@ int is_syscall(unsigned long addr) return instr == 0x050f; } -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; long fpregs[HOST_FP_SIZE]; @@ -162,7 +162,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) return n; } -int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; long fpregs[HOST_FP_SIZE]; @@ -182,12 +182,16 @@ long subarch_ptrace(struct task_struct *child, long request, void __user *datap = (void __user *) data; switch (request) { - case PTRACE_GETFPXREGS: /* Get the child FPU state. */ + case PTRACE_GETFPREGS: /* Get the child FPU state. */ ret = get_fpregs(datap, child); break; - case PTRACE_SETFPXREGS: /* Set the child FPU state. */ + case PTRACE_SETFPREGS: /* Set the child FPU state. */ ret = set_fpregs(datap, child); break; + case PTRACE_ARCH_PRCTL: + /* XXX Calls ptrace on the host - needs some SMP thinking */ + ret = arch_prctl(child, data, (void __user *) addr); + break; } return ret; diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h index fdba5457947a..8ee8f8e12af1 100644 --- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h +++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h @@ -85,6 +85,7 @@ struct uml_pt_regs { unsigned long gp[MAX_REG_NR]; + unsigned long fp[HOST_FP_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h index 4bd87f3d13d4..1a5c5a5eb39c 100644 --- a/arch/unicore32/include/asm/io.h +++ b/arch/unicore32/include/asm/io.h @@ -32,7 +32,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #define ioremap(cookie, size) __uc32_ioremap(cookie, size) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6a47bb22657f..77f7a384c0b5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -64,10 +64,12 @@ config X86 select HAVE_TEXT_POKE_SMP select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ + select SPARSE_IRQ select GENERIC_FIND_FIRST_BIT select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW + select GENERIC_CLOCKEVENTS_MIN_ADJUST select IRQ_FORCED_THREADING select USE_GENERIC_SMP_HELPERS if SMP select HAVE_BPF_JIT if (X86_64 && NET) @@ -130,7 +132,7 @@ config SBUS bool config NEED_DMA_MAP_STATE - def_bool (X86_64 || DMAR || DMA_API_DEBUG) + def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG) config NEED_SG_DMA_LENGTH def_bool y @@ -220,7 +222,7 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC config HAVE_INTEL_TXT def_bool y - depends on EXPERIMENTAL && DMAR && ACPI + depends on EXPERIMENTAL && INTEL_IOMMU && ACPI config X86_32_SMP def_bool y @@ -279,7 +281,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also <file:Documentation/i386/IO-APIC.txt>, + See also <file:Documentation/x86/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. @@ -287,7 +289,7 @@ config SMP config X86_X2APIC bool "Support x2apic" - depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP + depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP ---help--- This enables x2apic support on CPUs that have this feature. @@ -1452,6 +1454,15 @@ config ARCH_USES_PG_UNCACHED def_bool y depends on X86_PAT +config ARCH_RANDOM + def_bool y + prompt "x86 architectural random number generator" if EXPERT + ---help--- + Enable the x86 architectural RDRAND instruction + (Intel Bull Mountain technology) to generate random numbers. + If supported, this is a high bandwidth, cryptographically + secure hardware random number generator. + config EFI bool "EFI runtime service support" depends on ACPI @@ -2064,6 +2075,20 @@ config OLPC_XO15_SCI - AC adapter status updates - Battery status updates +config ALIX + bool "PCEngines ALIX System Support (LED setup)" + select GPIOLIB + ---help--- + This option enables system support for the PCEngines ALIX. + At present this just sets up LEDs for GPIO control on + ALIX2/3/6 boards. However, other system specific setup should + get added here. + + Note: You must still enable the drivers for GPIO and LED support + (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs + + Note: You have to set alix.force=1 for boards with Award BIOS. + endif # X86_32 config AMD_NB diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index c0f8a5c88910..bf56e1793272 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -139,7 +139,7 @@ config IOMMU_DEBUG code. When you use it make sure you have a big enough IOMMU/AGP aperture. Most of the options enabled by this can be set more finegrained using the iommu= command line - options. See Documentation/x86_64/boot-options.txt for more + options. See Documentation/x86/x86_64/boot-options.txt for more details. config IOMMU_STRESS diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 93e689f4bd86..bdb4d458ec8c 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -129,7 +129,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just type_of_loader: .byte 0 # 0 means ancient bootloader, newer # bootloaders know to change this. - # See Documentation/i386/boot.txt for + # See Documentation/x86/boot.txt for # assigned ids # flags, unused bits must be zero (RFU) bit within loadflags diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 22a0dc8e51dd..058a35b8286c 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -67,8 +67,8 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_PCI_MMCONFIG=y -CONFIG_DMAR=y -# CONFIG_DMAR_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU=y +# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_PCIEPORTBUS=y CONFIG_PCCARD=y CONFIG_YENTA=y diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index a0e866d233ee..54edb207ff3a 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -672,7 +672,7 @@ ia32_sys_call_table: .quad sys32_vm86_warning /* vm86 */ .quad quiet_ni_syscall /* query_module */ .quad sys_poll - .quad compat_sys_nfsservctl + .quad quiet_ni_syscall /* old nfsservctl */ .quad sys_setresgid16 /* 170 */ .quad sys_getresgid16 .quad sys_prctl diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h index 4554cc6fb96a..091508b533b4 100644 --- a/arch/x86/include/asm/alternative-asm.h +++ b/arch/x86/include/asm/alternative-asm.h @@ -16,7 +16,6 @@ #endif .macro altinstruction_entry orig alt feature orig_len alt_len - .align 8 .long \orig - . .long \alt - . .word \feature diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 23fb6d79f209..37ad100a2210 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -48,9 +48,6 @@ struct alt_instr { u16 cpuid; /* cpuid bit set for replacement */ u8 instrlen; /* length of original instruction */ u8 replacementlen; /* length of new instruction, <= instrlen */ -#ifdef CONFIG_X86_64 - u32 pad2; -#endif }; extern void alternative_instructions(void); @@ -83,7 +80,6 @@ static inline int alternatives_text_reserved(void *start, void *end) \ "661:\n\t" oldinstr "\n662:\n" \ ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ " .long 661b - .\n" /* label */ \ " .long 663f - .\n" /* new instruction */ \ " .word " __stringify(feature) "\n" /* feature bit */ \ diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 67f87f257611..8e41071704a5 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -19,9 +19,15 @@ extern int amd_numa_init(void); extern int amd_get_subcaches(int); extern int amd_set_subcaches(int, int); +struct amd_l3_cache { + unsigned indices; + u8 subcaches[4]; +}; + struct amd_northbridge { struct pci_dev *misc; struct pci_dev *link; + struct amd_l3_cache l3_cache; }; struct amd_northbridge_info { diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 7b3ca8324b69..9b7273cb2193 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -495,7 +495,7 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert) return; } -extern struct apic *generic_bigsmp_probe(void); +extern void generic_bigsmp_probe(void); #ifdef CONFIG_X86_LOCAL_APIC diff --git a/arch/x86/include/asm/archrandom.h b/arch/x86/include/asm/archrandom.h new file mode 100644 index 000000000000..0d9ec770f2f8 --- /dev/null +++ b/arch/x86/include/asm/archrandom.h @@ -0,0 +1,75 @@ +/* + * This file is part of the Linux kernel. + * + * Copyright (c) 2011, Intel Corporation + * Authors: Fenghua Yu <fenghua.yu@intel.com>, + * H. Peter Anvin <hpa@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef ASM_X86_ARCHRANDOM_H +#define ASM_X86_ARCHRANDOM_H + +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/alternative.h> +#include <asm/nops.h> + +#define RDRAND_RETRY_LOOPS 10 + +#define RDRAND_INT ".byte 0x0f,0xc7,0xf0" +#ifdef CONFIG_X86_64 +# define RDRAND_LONG ".byte 0x48,0x0f,0xc7,0xf0" +#else +# define RDRAND_LONG RDRAND_INT +#endif + +#ifdef CONFIG_ARCH_RANDOM + +#define GET_RANDOM(name, type, rdrand, nop) \ +static inline int name(type *v) \ +{ \ + int ok; \ + alternative_io("movl $0, %0\n\t" \ + nop, \ + "\n1: " rdrand "\n\t" \ + "jc 2f\n\t" \ + "decl %0\n\t" \ + "jnz 1b\n\t" \ + "2:", \ + X86_FEATURE_RDRAND, \ + ASM_OUTPUT2("=r" (ok), "=a" (*v)), \ + "0" (RDRAND_RETRY_LOOPS)); \ + return ok; \ +} + +#ifdef CONFIG_X86_64 + +GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP5); +GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP4); + +#else + +GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP3); +GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP3); + +#endif /* CONFIG_X86_64 */ + +#endif /* CONFIG_ARCH_RANDOM */ + +extern void x86_init_rdrand(struct cpuinfo_x86 *c); + +#endif /* ASM_X86_ARCHRANDOM_H */ diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index 10572e309ab2..58cb6d4085f7 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -172,18 +172,14 @@ static inline int atomic_add_negative(int i, atomic_t *v) */ static inline int atomic_add_return(int i, atomic_t *v) { - int __i; #ifdef CONFIG_M386 + int __i; unsigned long flags; if (unlikely(boot_cpu_data.x86 <= 3)) goto no_xadd; #endif /* Modern 486+ processor */ - __i = i; - asm volatile(LOCK_PREFIX "xaddl %0, %1" - : "+r" (i), "+m" (v->counter) - : : "memory"); - return i + __i; + return i + xadd(&v->counter, i); #ifdef CONFIG_M386 no_xadd: /* Legacy 386 processor */ diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h index 017594d403f6..0e1cbfc8ee06 100644 --- a/arch/x86/include/asm/atomic64_64.h +++ b/arch/x86/include/asm/atomic64_64.h @@ -170,11 +170,7 @@ static inline int atomic64_add_negative(long i, atomic64_t *v) */ static inline long atomic64_add_return(long i, atomic64_t *v) { - long __i = i; - asm volatile(LOCK_PREFIX "xaddq %0, %1;" - : "+r" (i), "+m" (v->counter) - : : "memory"); - return i + __i; + return i + xadd(&v->counter, i); } static inline long atomic64_sub_return(long i, atomic64_t *v) diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index a460fa088d4c..5d3acdf5a7a6 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h @@ -1,5 +1,210 @@ +#ifndef ASM_X86_CMPXCHG_H +#define ASM_X86_CMPXCHG_H + +#include <linux/compiler.h> +#include <asm/alternative.h> /* Provides LOCK_PREFIX */ + +/* + * Non-existant functions to indicate usage errors at link time + * (or compile-time if the compiler implements __compiletime_error(). + */ +extern void __xchg_wrong_size(void) + __compiletime_error("Bad argument size for xchg"); +extern void __cmpxchg_wrong_size(void) + __compiletime_error("Bad argument size for cmpxchg"); +extern void __xadd_wrong_size(void) + __compiletime_error("Bad argument size for xadd"); + +/* + * Constants for operation sizes. On 32-bit, the 64-bit size it set to + * -1 because sizeof will never return -1, thereby making those switch + * case statements guaranteeed dead code which the compiler will + * eliminate, and allowing the "missing symbol in the default case" to + * indicate a usage error. + */ +#define __X86_CASE_B 1 +#define __X86_CASE_W 2 +#define __X86_CASE_L 4 +#ifdef CONFIG_64BIT +#define __X86_CASE_Q 8 +#else +#define __X86_CASE_Q -1 /* sizeof will never return -1 */ +#endif + +/* + * Note: no "lock" prefix even on SMP: xchg always implies lock anyway. + * Since this is generally used to protect other memory information, we + * use "asm volatile" and "memory" clobbers to prevent gcc from moving + * information around. + */ +#define __xchg(x, ptr, size) \ +({ \ + __typeof(*(ptr)) __x = (x); \ + switch (size) { \ + case __X86_CASE_B: \ + { \ + volatile u8 *__ptr = (volatile u8 *)(ptr); \ + asm volatile("xchgb %0,%1" \ + : "=q" (__x), "+m" (*__ptr) \ + : "0" (__x) \ + : "memory"); \ + break; \ + } \ + case __X86_CASE_W: \ + { \ + volatile u16 *__ptr = (volatile u16 *)(ptr); \ + asm volatile("xchgw %0,%1" \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ + : "memory"); \ + break; \ + } \ + case __X86_CASE_L: \ + { \ + volatile u32 *__ptr = (volatile u32 *)(ptr); \ + asm volatile("xchgl %0,%1" \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ + : "memory"); \ + break; \ + } \ + case __X86_CASE_Q: \ + { \ + volatile u64 *__ptr = (volatile u64 *)(ptr); \ + asm volatile("xchgq %0,%1" \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ + : "memory"); \ + break; \ + } \ + default: \ + __xchg_wrong_size(); \ + } \ + __x; \ +}) + +#define xchg(ptr, v) \ + __xchg((v), (ptr), sizeof(*ptr)) + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ +#define __raw_cmpxchg(ptr, old, new, size, lock) \ +({ \ + __typeof__(*(ptr)) __ret; \ + __typeof__(*(ptr)) __old = (old); \ + __typeof__(*(ptr)) __new = (new); \ + switch (size) { \ + case __X86_CASE_B: \ + { \ + volatile u8 *__ptr = (volatile u8 *)(ptr); \ + asm volatile(lock "cmpxchgb %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "q" (__new), "0" (__old) \ + : "memory"); \ + break; \ + } \ + case __X86_CASE_W: \ + { \ + volatile u16 *__ptr = (volatile u16 *)(ptr); \ + asm volatile(lock "cmpxchgw %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ + : "memory"); \ + break; \ + } \ + case __X86_CASE_L: \ + { \ + volatile u32 *__ptr = (volatile u32 *)(ptr); \ + asm volatile(lock "cmpxchgl %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ + : "memory"); \ + break; \ + } \ + case __X86_CASE_Q: \ + { \ + volatile u64 *__ptr = (volatile u64 *)(ptr); \ + asm volatile(lock "cmpxchgq %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ + : "memory"); \ + break; \ + } \ + default: \ + __cmpxchg_wrong_size(); \ + } \ + __ret; \ +}) + +#define __cmpxchg(ptr, old, new, size) \ + __raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX) + +#define __sync_cmpxchg(ptr, old, new, size) \ + __raw_cmpxchg((ptr), (old), (new), (size), "lock; ") + +#define __cmpxchg_local(ptr, old, new, size) \ + __raw_cmpxchg((ptr), (old), (new), (size), "") + #ifdef CONFIG_X86_32 # include "cmpxchg_32.h" #else # include "cmpxchg_64.h" #endif + +#ifdef __HAVE_ARCH_CMPXCHG +#define cmpxchg(ptr, old, new) \ + __cmpxchg((ptr), (old), (new), sizeof(*ptr)) + +#define sync_cmpxchg(ptr, old, new) \ + __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr)) + +#define cmpxchg_local(ptr, old, new) \ + __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) +#endif + +#define __xadd(ptr, inc, lock) \ + ({ \ + __typeof__ (*(ptr)) __ret = (inc); \ + switch (sizeof(*(ptr))) { \ + case __X86_CASE_B: \ + asm volatile (lock "xaddb %b0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + case __X86_CASE_W: \ + asm volatile (lock "xaddw %w0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + case __X86_CASE_L: \ + asm volatile (lock "xaddl %0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + case __X86_CASE_Q: \ + asm volatile (lock "xaddq %q0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + default: \ + __xadd_wrong_size(); \ + } \ + __ret; \ + }) + +/* + * xadd() adds "inc" to "*ptr" and atomically returns the previous + * value of "*ptr". + * + * xadd() is locked when multiple CPUs are online + * xadd_sync() is always locked + * xadd_local() is never locked + */ +#define xadd(ptr, inc) __xadd((ptr), (inc), LOCK_PREFIX) +#define xadd_sync(ptr, inc) __xadd((ptr), (inc), "lock; ") +#define xadd_local(ptr, inc) __xadd((ptr), (inc), "") + +#endif /* ASM_X86_CMPXCHG_H */ diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h index 3deb7250624c..fbebb07dd80b 100644 --- a/arch/x86/include/asm/cmpxchg_32.h +++ b/arch/x86/include/asm/cmpxchg_32.h @@ -1,61 +1,11 @@ #ifndef _ASM_X86_CMPXCHG_32_H #define _ASM_X86_CMPXCHG_32_H -#include <linux/bitops.h> /* for LOCK_PREFIX */ - /* * Note: if you use set64_bit(), __cmpxchg64(), or their variants, you * you need to test for the feature in boot_cpu_data. */ -extern void __xchg_wrong_size(void); - -/* - * Note: no "lock" prefix even on SMP: xchg always implies lock anyway. - * Since this is generally used to protect other memory information, we - * use "asm volatile" and "memory" clobbers to prevent gcc from moving - * information around. - */ -#define __xchg(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __x = (x); \ - switch (size) { \ - case 1: \ - { \ - volatile u8 *__ptr = (volatile u8 *)(ptr); \ - asm volatile("xchgb %0,%1" \ - : "=q" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case 2: \ - { \ - volatile u16 *__ptr = (volatile u16 *)(ptr); \ - asm volatile("xchgw %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case 4: \ - { \ - volatile u32 *__ptr = (volatile u32 *)(ptr); \ - asm volatile("xchgl %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - default: \ - __xchg_wrong_size(); \ - } \ - __x; \ -}) - -#define xchg(ptr, v) \ - __xchg((v), (ptr), sizeof(*ptr)) - /* * CMPXCHG8B only writes to the target if we had the previous * value in registers, otherwise it acts as a read and gives us the @@ -84,72 +34,8 @@ static inline void set_64bit(volatile u64 *ptr, u64 value) : "memory"); } -extern void __cmpxchg_wrong_size(void); - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ -#define __raw_cmpxchg(ptr, old, new, size, lock) \ -({ \ - __typeof__(*(ptr)) __ret; \ - __typeof__(*(ptr)) __old = (old); \ - __typeof__(*(ptr)) __new = (new); \ - switch (size) { \ - case 1: \ - { \ - volatile u8 *__ptr = (volatile u8 *)(ptr); \ - asm volatile(lock "cmpxchgb %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "q" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - case 2: \ - { \ - volatile u16 *__ptr = (volatile u16 *)(ptr); \ - asm volatile(lock "cmpxchgw %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "r" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - case 4: \ - { \ - volatile u32 *__ptr = (volatile u32 *)(ptr); \ - asm volatile(lock "cmpxchgl %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "r" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - default: \ - __cmpxchg_wrong_size(); \ - } \ - __ret; \ -}) - -#define __cmpxchg(ptr, old, new, size) \ - __raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX) - -#define __sync_cmpxchg(ptr, old, new, size) \ - __raw_cmpxchg((ptr), (old), (new), (size), "lock; ") - -#define __cmpxchg_local(ptr, old, new, size) \ - __raw_cmpxchg((ptr), (old), (new), (size), "") - #ifdef CONFIG_X86_CMPXCHG #define __HAVE_ARCH_CMPXCHG 1 - -#define cmpxchg(ptr, old, new) \ - __cmpxchg((ptr), (old), (new), sizeof(*ptr)) - -#define sync_cmpxchg(ptr, old, new) \ - __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr)) - -#define cmpxchg_local(ptr, old, new) \ - __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) #endif #ifdef CONFIG_X86_CMPXCHG64 diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h index 7cf5c0a24434..285da02c38fa 100644 --- a/arch/x86/include/asm/cmpxchg_64.h +++ b/arch/x86/include/asm/cmpxchg_64.h @@ -1,144 +1,13 @@ #ifndef _ASM_X86_CMPXCHG_64_H #define _ASM_X86_CMPXCHG_64_H -#include <asm/alternative.h> /* Provides LOCK_PREFIX */ - static inline void set_64bit(volatile u64 *ptr, u64 val) { *ptr = val; } -extern void __xchg_wrong_size(void); -extern void __cmpxchg_wrong_size(void); - -/* - * Note: no "lock" prefix even on SMP: xchg always implies lock anyway. - * Since this is generally used to protect other memory information, we - * use "asm volatile" and "memory" clobbers to prevent gcc from moving - * information around. - */ -#define __xchg(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __x = (x); \ - switch (size) { \ - case 1: \ - { \ - volatile u8 *__ptr = (volatile u8 *)(ptr); \ - asm volatile("xchgb %0,%1" \ - : "=q" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case 2: \ - { \ - volatile u16 *__ptr = (volatile u16 *)(ptr); \ - asm volatile("xchgw %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case 4: \ - { \ - volatile u32 *__ptr = (volatile u32 *)(ptr); \ - asm volatile("xchgl %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case 8: \ - { \ - volatile u64 *__ptr = (volatile u64 *)(ptr); \ - asm volatile("xchgq %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - default: \ - __xchg_wrong_size(); \ - } \ - __x; \ -}) - -#define xchg(ptr, v) \ - __xchg((v), (ptr), sizeof(*ptr)) - #define __HAVE_ARCH_CMPXCHG 1 -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ -#define __raw_cmpxchg(ptr, old, new, size, lock) \ -({ \ - __typeof__(*(ptr)) __ret; \ - __typeof__(*(ptr)) __old = (old); \ - __typeof__(*(ptr)) __new = (new); \ - switch (size) { \ - case 1: \ - { \ - volatile u8 *__ptr = (volatile u8 *)(ptr); \ - asm volatile(lock "cmpxchgb %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "q" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - case 2: \ - { \ - volatile u16 *__ptr = (volatile u16 *)(ptr); \ - asm volatile(lock "cmpxchgw %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "r" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - case 4: \ - { \ - volatile u32 *__ptr = (volatile u32 *)(ptr); \ - asm volatile(lock "cmpxchgl %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "r" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - case 8: \ - { \ - volatile u64 *__ptr = (volatile u64 *)(ptr); \ - asm volatile(lock "cmpxchgq %2,%1" \ - : "=a" (__ret), "+m" (*__ptr) \ - : "r" (__new), "0" (__old) \ - : "memory"); \ - break; \ - } \ - default: \ - __cmpxchg_wrong_size(); \ - } \ - __ret; \ -}) - -#define __cmpxchg(ptr, old, new, size) \ - __raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX) - -#define __sync_cmpxchg(ptr, old, new, size) \ - __raw_cmpxchg((ptr), (old), (new), (size), "lock; ") - -#define __cmpxchg_local(ptr, old, new, size) \ - __raw_cmpxchg((ptr), (old), (new), (size), "") - -#define cmpxchg(ptr, old, new) \ - __cmpxchg((ptr), (old), (new), sizeof(*ptr)) - -#define sync_cmpxchg(ptr, old, new) \ - __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr)) - -#define cmpxchg_local(ptr, old, new) \ - __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) - #define cmpxchg64(ptr, o, n) \ ({ \ BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h index 1d9cd27c2920..30d737ef2a42 100644 --- a/arch/x86/include/asm/compat.h +++ b/arch/x86/include/asm/compat.h @@ -108,7 +108,8 @@ struct compat_statfs { compat_fsid_t f_fsid; int f_namelen; /* SunOS ignores this field. */ int f_frsize; - int f_spare[5]; + int f_flags; + int f_spare[4]; }; #define COMPAT_RLIM_OLD_INFINITY 0x7fffffff diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 4258aac99a6e..aa6a488cd075 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -114,6 +114,7 @@ #define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */ #define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ #define X86_FEATURE_PDCM (4*32+15) /* Performance Capabilities */ +#define X86_FEATURE_PCID (4*32+17) /* Process Context Identifiers */ #define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */ #define X86_FEATURE_XMM4_1 (4*32+19) /* "sse4_1" SSE-4.1 */ #define X86_FEATURE_XMM4_2 (4*32+20) /* "sse4_2" SSE-4.2 */ @@ -332,7 +333,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) asm goto("1: jmp %l[t_no]\n" "2:\n" ".section .altinstructions,\"a\"\n" - _ASM_ALIGN "\n" " .long 1b - .\n" " .long 0\n" /* no replacement */ " .word %P0\n" /* feature bit */ @@ -350,7 +350,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) asm volatile("1: movb $0,%0\n" "2:\n" ".section .altinstructions,\"a\"\n" - _ASM_ALIGN "\n" " .long 1b - .\n" " .long 3f - .\n" " .word %P1\n" /* feature bit */ diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h index 029f230ab637..63a2a03d7d51 100644 --- a/arch/x86/include/asm/device.h +++ b/arch/x86/include/asm/device.h @@ -8,7 +8,7 @@ struct dev_archdata { #ifdef CONFIG_X86_64 struct dma_map_ops *dma_ops; #endif -#if defined(CONFIG_DMAR) || defined(CONFIG_AMD_IOMMU) +#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU) void *iommu; /* hook for IOMMU specific extension */ #endif }; diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index d4c419f883a0..ed3065fd6314 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -2,7 +2,7 @@ #define _ASM_X86_DMA_MAPPING_H /* - * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and + * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. */ diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h index 326099199318..f6f15986df6c 100644 --- a/arch/x86/include/asm/dwarf2.h +++ b/arch/x86/include/asm/dwarf2.h @@ -27,6 +27,7 @@ #define CFI_REMEMBER_STATE .cfi_remember_state #define CFI_RESTORE_STATE .cfi_restore_state #define CFI_UNDEFINED .cfi_undefined +#define CFI_ESCAPE .cfi_escape #ifdef CONFIG_AS_CFI_SIGNAL_FRAME #define CFI_SIGNAL_FRAME .cfi_signal_frame @@ -68,6 +69,7 @@ #define CFI_REMEMBER_STATE cfi_ignore #define CFI_RESTORE_STATE cfi_ignore #define CFI_UNDEFINED cfi_ignore +#define CFI_ESCAPE cfi_ignore #define CFI_SIGNAL_FRAME cfi_ignore #endif diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index f2ad2163109d..5f962df30d0f 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -4,6 +4,7 @@ /* * ELF register definitions.. */ +#include <linux/thread_info.h> #include <asm/ptrace.h> #include <asm/user.h> @@ -320,4 +321,34 @@ extern int syscall32_setup_pages(struct linux_binprm *, int exstack); extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +/* + * True on X86_32 or when emulating IA32 on X86_64 + */ +static inline int mmap_is_ia32(void) +{ +#ifdef CONFIG_X86_32 + return 1; +#endif +#ifdef CONFIG_IA32_EMULATION + if (test_thread_flag(TIF_IA32)) + return 1; +#endif + return 0; +} + +/* The first two values are special, do not change. See align_addr() */ +enum align_flags { + ALIGN_VA_32 = BIT(0), + ALIGN_VA_64 = BIT(1), + ALIGN_VDSO = BIT(2), + ALIGN_TOPDOWN = BIT(3), +}; + +struct va_alignment { + int flags; + unsigned long mask; +} ____cacheline_aligned; + +extern struct va_alignment va_align; +extern unsigned long align_addr(unsigned long, struct file *, enum align_flags); #endif /* _ASM_X86_ELF_H */ diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 09199052060f..eb92a6ed2be7 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -119,7 +119,7 @@ struct irq_cfg { cpumask_var_t old_domain; u8 vector; u8 move_in_progress : 1; -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP struct irq_2_iommu irq_2_iommu; #endif }; diff --git a/arch/x86/include/asm/hyperv.h b/arch/x86/include/asm/hyperv.h index 5df477ac3af7..b80420bcd09d 100644 --- a/arch/x86/include/asm/hyperv.h +++ b/arch/x86/include/asm/hyperv.h @@ -189,5 +189,6 @@ #define HV_STATUS_INVALID_HYPERCALL_CODE 2 #define HV_STATUS_INVALID_HYPERCALL_INPUT 3 #define HV_STATUS_INVALID_ALIGNMENT 4 +#define HV_STATUS_INSUFFICIENT_BUFFERS 19 #endif diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h index 1c23360fb2d8..47d99934580f 100644 --- a/arch/x86/include/asm/irq_remapping.h +++ b/arch/x86/include/asm/irq_remapping.h @@ -3,7 +3,8 @@ #define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8) -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP +static void irq_remap_modify_chip_defaults(struct irq_chip *chip); static inline void prepare_irte(struct irte *irte, int vector, unsigned int dest) { @@ -36,6 +37,9 @@ static inline bool irq_remapped(struct irq_cfg *cfg) { return false; } +static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip) +{ +} #endif #endif /* _ASM_X86_IRQ_REMAPPING_H */ diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 7e50f06393aa..4b4448761e88 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -160,19 +160,11 @@ static inline int invalid_vm86_irq(int irq) #define IO_APIC_VECTOR_LIMIT ( 32 * MAX_IO_APICS ) #ifdef CONFIG_X86_IO_APIC -# ifdef CONFIG_SPARSE_IRQ -# define CPU_VECTOR_LIMIT (64 * NR_CPUS) -# define NR_IRQS \ +# define CPU_VECTOR_LIMIT (64 * NR_CPUS) +# define NR_IRQS \ (CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ? \ (NR_VECTORS + CPU_VECTOR_LIMIT) : \ (NR_VECTORS + IO_APIC_VECTOR_LIMIT)) -# else -# define CPU_VECTOR_LIMIT (32 * NR_CPUS) -# define NR_IRQS \ - (CPU_VECTOR_LIMIT < IO_APIC_VECTOR_LIMIT ? \ - (NR_VECTORS + CPU_VECTOR_LIMIT) : \ - (NR_VECTORS + IO_APIC_VECTOR_LIMIT)) -# endif #else /* !CONFIG_X86_IO_APIC: */ # define NR_IRQS NR_IRQS_LEGACY #endif diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index 4886a68f267e..fd3f9f18cf3f 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -22,27 +22,26 @@ void arch_trigger_all_cpu_backtrace(void); #define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace #endif -/* - * Define some priorities for the nmi notifier call chain. - * - * Create a local nmi bit that has a higher priority than - * external nmis, because the local ones are more frequent. - * - * Also setup some default high/normal/low settings for - * subsystems to registers with. Using 4 bits to separate - * the priorities. This can go a lot higher if needed be. - */ - -#define NMI_LOCAL_SHIFT 16 /* randomly picked */ -#define NMI_LOCAL_BIT (1ULL << NMI_LOCAL_SHIFT) -#define NMI_HIGH_PRIOR (1ULL << 8) -#define NMI_NORMAL_PRIOR (1ULL << 4) -#define NMI_LOW_PRIOR (1ULL << 0) -#define NMI_LOCAL_HIGH_PRIOR (NMI_LOCAL_BIT | NMI_HIGH_PRIOR) -#define NMI_LOCAL_NORMAL_PRIOR (NMI_LOCAL_BIT | NMI_NORMAL_PRIOR) -#define NMI_LOCAL_LOW_PRIOR (NMI_LOCAL_BIT | NMI_LOW_PRIOR) +#define NMI_FLAG_FIRST 1 + +enum { + NMI_LOCAL=0, + NMI_UNKNOWN, + NMI_MAX +}; + +#define NMI_DONE 0 +#define NMI_HANDLED 1 + +typedef int (*nmi_handler_t)(unsigned int, struct pt_regs *); + +int register_nmi_handler(unsigned int, nmi_handler_t, unsigned long, + const char *); + +void unregister_nmi_handler(unsigned int, const char *); void stop_nmi(void); void restart_nmi(void); +void local_touch_nmi(void); #endif /* _ASM_X86_NMI_H */ diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index 704526734bef..e38197806853 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -99,10 +99,10 @@ struct pci_raw_ops { int reg, int len, u32 val); }; -extern struct pci_raw_ops *raw_pci_ops; -extern struct pci_raw_ops *raw_pci_ext_ops; +extern const struct pci_raw_ops *raw_pci_ops; +extern const struct pci_raw_ops *raw_pci_ext_ops; -extern struct pci_raw_ops pci_direct_conf1; +extern const struct pci_raw_ops pci_direct_conf1; extern bool port_cf9_safe; /* arch_initcall level */ diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 094fb30817ab..f61c62f7d5d8 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -29,6 +29,9 @@ #define ARCH_PERFMON_EVENTSEL_INV (1ULL << 23) #define ARCH_PERFMON_EVENTSEL_CMASK 0xFF000000ULL +#define AMD_PERFMON_EVENTSEL_GUESTONLY (1ULL << 40) +#define AMD_PERFMON_EVENTSEL_HOSTONLY (1ULL << 41) + #define AMD64_EVENTSEL_EVENT \ (ARCH_PERFMON_EVENTSEL_EVENT | (0x0FULL << 32)) #define INTEL_ARCH_EVENT_MASK \ @@ -43,14 +46,17 @@ #define AMD64_RAW_EVENT_MASK \ (X86_RAW_EVENT_MASK | \ AMD64_EVENTSEL_EVENT) +#define AMD64_NUM_COUNTERS 4 +#define AMD64_NUM_COUNTERS_F15H 6 +#define AMD64_NUM_COUNTERS_MAX AMD64_NUM_COUNTERS_F15H -#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL 0x3c +#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL 0x3c #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8) -#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 0 +#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 0 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \ (1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX)) -#define ARCH_PERFMON_BRANCH_MISSES_RETIRED 6 +#define ARCH_PERFMON_BRANCH_MISSES_RETIRED 6 /* * Intel "Architectural Performance Monitoring" CPUID @@ -110,6 +116,35 @@ union cpuid10_edx { */ #define X86_PMC_IDX_FIXED_BTS (X86_PMC_IDX_FIXED + 16) +/* + * IBS cpuid feature detection + */ + +#define IBS_CPUID_FEATURES 0x8000001b + +/* + * Same bit mask as for IBS cpuid feature flags (Fn8000_001B_EAX), but + * bit 0 is used to indicate the existence of IBS. + */ +#define IBS_CAPS_AVAIL (1U<<0) +#define IBS_CAPS_FETCHSAM (1U<<1) +#define IBS_CAPS_OPSAM (1U<<2) +#define IBS_CAPS_RDWROPCNT (1U<<3) +#define IBS_CAPS_OPCNT (1U<<4) +#define IBS_CAPS_BRNTRGT (1U<<5) +#define IBS_CAPS_OPCNTEXT (1U<<6) + +#define IBS_CAPS_DEFAULT (IBS_CAPS_AVAIL \ + | IBS_CAPS_FETCHSAM \ + | IBS_CAPS_OPSAM) + +/* + * IBS APIC setup + */ +#define IBSCTL 0x1cc +#define IBSCTL_LVT_OFFSET_VALID (1ULL<<8) +#define IBSCTL_LVT_OFFSET_MASK 0x0F + /* IbsFetchCtl bits/masks */ #define IBS_FETCH_RAND_EN (1ULL<<57) #define IBS_FETCH_VAL (1ULL<<49) @@ -124,6 +159,8 @@ union cpuid10_edx { #define IBS_OP_MAX_CNT 0x0000FFFFULL #define IBS_OP_MAX_CNT_EXT 0x007FFFFFULL /* not a register bit mask */ +extern u32 get_ibs_caps(void); + #ifdef CONFIG_PERF_EVENTS extern void perf_events_lapic_init(void); @@ -159,7 +196,19 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs); ); \ } +struct perf_guest_switch_msr { + unsigned msr; + u64 host, guest; +}; + +extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr); #else +static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr) +{ + *nr = 0; + return NULL; +} + static inline void perf_events_lapic_init(void) { } #endif diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 0d1171c97729..b650435ffb53 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -111,6 +111,7 @@ struct cpuinfo_x86 { /* Index into per_cpu list: */ u16 cpu_index; #endif + u32 microcode; } __attribute__((__aligned__(SMP_CACHE_BYTES))); #define X86_VENDOR_INTEL 0 @@ -179,7 +180,8 @@ static inline void native_cpuid(unsigned int *eax, unsigned int *ebx, "=b" (*ebx), "=c" (*ecx), "=d" (*edx) - : "0" (*eax), "2" (*ecx)); + : "0" (*eax), "2" (*ecx) + : "memory"); } static inline void load_cr3(pgd_t *pgdir) diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index a518c0a45044..c59cc97fe6c1 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -44,7 +44,7 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); #elif defined(__x86_64__) __asm__ ( - "mul %[mul_frac] ; shrd $32, %[hi], %[lo]" + "mulq %[mul_frac] ; shrd $32, %[hi], %[lo]" : [lo]"=a"(product), [hi]"=d"(tmp) : "0"(delta), diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h index 3250e3d605d9..92f297069e87 100644 --- a/arch/x86/include/asm/reboot.h +++ b/arch/x86/include/asm/reboot.h @@ -23,7 +23,7 @@ void machine_real_restart(unsigned int type); #define MRR_BIOS 0 #define MRR_APM 1 -typedef void (*nmi_shootdown_cb)(int, struct die_args*); +typedef void (*nmi_shootdown_cb)(int, struct pt_regs*); void nmi_shootdown_cpus(nmi_shootdown_cb callback); #endif /* _ASM_X86_REBOOT_H */ diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index df4cd32b4cc6..2dbe4a721ce5 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -204,13 +204,7 @@ static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem) */ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) { - long tmp = delta; - - asm volatile(LOCK_PREFIX "xadd %0,%1" - : "+r" (tmp), "+m" (sem->count) - : : "memory"); - - return tmp + delta; + return delta + xadd(&sem->count, delta); } #endif /* __KERNEL__ */ diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index ee67edf86fdd..972c260919a3 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -49,109 +49,49 @@ * issues and should be optimal for the uncontended case. Note the tail must be * in the high part, because a wide xadd increment of the low part would carry * up and contaminate the high part. - * - * With fewer than 2^8 possible CPUs, we can use x86's partial registers to - * save some instructions and make the code more elegant. There really isn't - * much between them in performance though, especially as locks are out of line. */ -#if (NR_CPUS < 256) -#define TICKET_SHIFT 8 - static __always_inline void __ticket_spin_lock(arch_spinlock_t *lock) { - short inc = 0x0100; - - asm volatile ( - LOCK_PREFIX "xaddw %w0, %1\n" - "1:\t" - "cmpb %h0, %b0\n\t" - "je 2f\n\t" - "rep ; nop\n\t" - "movb %1, %b0\n\t" - /* don't need lfence here, because loads are in-order */ - "jmp 1b\n" - "2:" - : "+Q" (inc), "+m" (lock->slock) - : - : "memory", "cc"); + register struct __raw_tickets inc = { .tail = 1 }; + + inc = xadd(&lock->tickets, inc); + + for (;;) { + if (inc.head == inc.tail) + break; + cpu_relax(); + inc.head = ACCESS_ONCE(lock->tickets.head); + } + barrier(); /* make sure nothing creeps before the lock is taken */ } static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock) { - int tmp, new; - - asm volatile("movzwl %2, %0\n\t" - "cmpb %h0,%b0\n\t" - "leal 0x100(%" REG_PTR_MODE "0), %1\n\t" - "jne 1f\n\t" - LOCK_PREFIX "cmpxchgw %w1,%2\n\t" - "1:" - "sete %b1\n\t" - "movzbl %b1,%0\n\t" - : "=&a" (tmp), "=&q" (new), "+m" (lock->slock) - : - : "memory", "cc"); + arch_spinlock_t old, new; + + old.tickets = ACCESS_ONCE(lock->tickets); + if (old.tickets.head != old.tickets.tail) + return 0; + + new.head_tail = old.head_tail + (1 << TICKET_SHIFT); - return tmp; + /* cmpxchg is a full barrier, so nothing can move before it */ + return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail; } +#if (NR_CPUS < 256) static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock) { asm volatile(UNLOCK_LOCK_PREFIX "incb %0" - : "+m" (lock->slock) + : "+m" (lock->head_tail) : : "memory", "cc"); } #else -#define TICKET_SHIFT 16 - -static __always_inline void __ticket_spin_lock(arch_spinlock_t *lock) -{ - int inc = 0x00010000; - int tmp; - - asm volatile(LOCK_PREFIX "xaddl %0, %1\n" - "movzwl %w0, %2\n\t" - "shrl $16, %0\n\t" - "1:\t" - "cmpl %0, %2\n\t" - "je 2f\n\t" - "rep ; nop\n\t" - "movzwl %1, %2\n\t" - /* don't need lfence here, because loads are in-order */ - "jmp 1b\n" - "2:" - : "+r" (inc), "+m" (lock->slock), "=&r" (tmp) - : - : "memory", "cc"); -} - -static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock) -{ - int tmp; - int new; - - asm volatile("movl %2,%0\n\t" - "movl %0,%1\n\t" - "roll $16, %0\n\t" - "cmpl %0,%1\n\t" - "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t" - "jne 1f\n\t" - LOCK_PREFIX "cmpxchgl %1,%2\n\t" - "1:" - "sete %b1\n\t" - "movzbl %b1,%0\n\t" - : "=&a" (tmp), "=&q" (new), "+m" (lock->slock) - : - : "memory", "cc"); - - return tmp; -} - static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock) { asm volatile(UNLOCK_LOCK_PREFIX "incw %0" - : "+m" (lock->slock) + : "+m" (lock->head_tail) : : "memory", "cc"); } @@ -159,16 +99,16 @@ static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock) static inline int __ticket_spin_is_locked(arch_spinlock_t *lock) { - int tmp = ACCESS_ONCE(lock->slock); + struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets); - return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1)); + return !!(tmp.tail ^ tmp.head); } static inline int __ticket_spin_is_contended(arch_spinlock_t *lock) { - int tmp = ACCESS_ONCE(lock->slock); + struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets); - return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1; + return ((tmp.tail - tmp.head) & TICKET_MASK) > 1; } #ifndef CONFIG_PARAVIRT_SPINLOCKS diff --git a/arch/x86/include/asm/spinlock_types.h b/arch/x86/include/asm/spinlock_types.h index 7c7a486fcb68..8ebd5df7451e 100644 --- a/arch/x86/include/asm/spinlock_types.h +++ b/arch/x86/include/asm/spinlock_types.h @@ -5,11 +5,29 @@ # error "please don't include this file directly" #endif +#include <linux/types.h> + +#if (CONFIG_NR_CPUS < 256) +typedef u8 __ticket_t; +typedef u16 __ticketpair_t; +#else +typedef u16 __ticket_t; +typedef u32 __ticketpair_t; +#endif + +#define TICKET_SHIFT (sizeof(__ticket_t) * 8) +#define TICKET_MASK ((__ticket_t)((1 << TICKET_SHIFT) - 1)) + typedef struct arch_spinlock { - unsigned int slock; + union { + __ticketpair_t head_tail; + struct __raw_tickets { + __ticket_t head, tail; + } tickets; + }; } arch_spinlock_t; -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } +#define __ARCH_SPIN_LOCK_UNLOCKED { { 0 } } #include <asm/rwlock.h> diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index d92641cc7acc..0a6ba337a2eb 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -414,7 +414,7 @@ __SYSCALL(__NR_query_module, sys_ni_syscall) __SYSCALL(__NR_quotactl, sys_quotactl) #define __NR_nfsservctl 180 -__SYSCALL(__NR_nfsservctl, sys_nfsservctl) +__SYSCALL(__NR_nfsservctl, sys_ni_syscall) /* reserved for LiS/STREAMS */ #define __NR_getpmsg 181 @@ -624,7 +624,6 @@ __SYSCALL(__NR_vmsplice, sys_vmsplice) __SYSCALL(__NR_move_pages, sys_move_pages) #define __NR_utimensat 280 __SYSCALL(__NR_utimensat, sys_utimensat) -#define __IGNORE_getcpu /* implemented as a vsyscall */ #define __NR_epoll_pwait 281 __SYSCALL(__NR_epoll_pwait, sys_epoll_pwait) #define __NR_signalfd 282 diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 37d369859c8e..8e862aaf0d90 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -55,6 +55,7 @@ #define UV_BAU_TUNABLES_DIR "sgi_uv" #define UV_BAU_TUNABLES_FILE "bau_tunables" #define WHITESPACE " \t\n" +#define uv_mmask ((1UL << uv_hub_info->m_val) - 1) #define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) #define cpubit_isset(cpu, bau_local_cpumask) \ test_bit((cpu), (bau_local_cpumask).bits) @@ -656,11 +657,7 @@ static inline int atomic_read_short(const struct atomic_short *v) */ static inline int atom_asr(short i, struct atomic_short *v) { - short __i = i; - asm volatile(LOCK_PREFIX "xaddw %0, %1" - : "+r" (i), "+m" (v->counter) - : : "memory"); - return i + __i; + return i + xadd(&v->counter, i); } /* diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index f26544a15214..54a13aaebc40 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -46,6 +46,13 @@ * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant * of the nasid for socket usage. * + * GPA - (global physical address) a socket physical address converted + * so that it can be used by the GRU as a global address. Socket + * physical addresses 1) need additional NASID (node) bits added + * to the high end of the address, and 2) unaliased if the + * partition does not have a physical address 0. In addition, on + * UV2 rev 1, GPAs need the gnode left shifted to bits 39 or 40. + * * * NumaLink Global Physical Address Format: * +--------------------------------+---------------------+ @@ -141,6 +148,8 @@ struct uv_hub_info_s { unsigned int gnode_extra; unsigned char hub_revision; unsigned char apic_pnode_shift; + unsigned char m_shift; + unsigned char n_lshift; unsigned long gnode_upper; unsigned long lowmem_remap_top; unsigned long lowmem_remap_base; @@ -177,6 +186,16 @@ static inline int is_uv2_hub(void) return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE; } +static inline int is_uv2_1_hub(void) +{ + return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE; +} + +static inline int is_uv2_2_hub(void) +{ + return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE + 1; +} + union uvh_apicid { unsigned long v; struct uvh_apicid_s { @@ -276,7 +295,10 @@ static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr) { if (paddr < uv_hub_info->lowmem_remap_top) paddr |= uv_hub_info->lowmem_remap_base; - return paddr | uv_hub_info->gnode_upper; + paddr |= uv_hub_info->gnode_upper; + paddr = ((paddr << uv_hub_info->m_shift) >> uv_hub_info->m_shift) | + ((paddr >> uv_hub_info->m_val) << uv_hub_info->n_lshift); + return paddr; } @@ -300,16 +322,19 @@ static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa) unsigned long remap_base = uv_hub_info->lowmem_remap_base; unsigned long remap_top = uv_hub_info->lowmem_remap_top; + gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) | + ((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val); + gpa = gpa & uv_hub_info->gpa_mask; if (paddr >= remap_base && paddr < remap_base + remap_top) paddr -= remap_base; return paddr; } -/* gnode -> pnode */ +/* gpa -> pnode */ static inline unsigned long uv_gpa_to_gnode(unsigned long gpa) { - return gpa >> uv_hub_info->m_val; + return gpa >> uv_hub_info->n_lshift; } /* gpa -> pnode */ @@ -320,6 +345,12 @@ static inline int uv_gpa_to_pnode(unsigned long gpa) return uv_gpa_to_gnode(gpa) & n_mask; } +/* gpa -> node offset*/ +static inline unsigned long uv_gpa_to_offset(unsigned long gpa) +{ + return (gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift; +} + /* pnode, offset --> socket virtual */ static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) { diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 7ff4669580cf..c34f96c2f7a0 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -12,6 +12,7 @@ #include <asm/pgtable.h> #include <xen/interface/xen.h> +#include <xen/grant_table.h> #include <xen/features.h> /* Xen machine address */ @@ -48,14 +49,11 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s, unsigned long pfn_e); extern int m2p_add_override(unsigned long mfn, struct page *page, - bool clear_pte); + struct gnttab_map_grant_ref *kmap_op); extern int m2p_remove_override(struct page *page, bool clear_pte); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); -#ifdef CONFIG_XEN_DEBUG_FS -extern int p2m_dump_show(struct seq_file *m, void *v); -#endif static inline unsigned long pfn_to_mfn(unsigned long pfn) { unsigned long mfn; diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 82f2912155a5..8baca3c4871c 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -19,7 +19,7 @@ endif obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o -obj-y += time.o ioport.o ldt.o dumpstack.o +obj-y += time.o ioport.o ldt.o dumpstack.o nmi.o obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o obj-$(CONFIG_IRQ_WORK) += irq_work.o obj-y += probe_roms.o diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index 8a439d364b94..b1e7c7f7a0af 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -5,7 +5,7 @@ * This allows to use PCI devices that only support 32bit addresses on systems * with more than 4GB. * - * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification. + * See Documentation/DMA-API-HOWTO.txt for the interface specification. * * Copyright 2002 Andi Kleen, SuSE Labs. * Subject to the GNU General Public License v2 only. diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 52fa56399a50..a2fd72e0ab35 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1437,27 +1437,21 @@ void enable_x2apic(void) int __init enable_IR(void) { -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP if (!intr_remapping_supported()) { pr_debug("intr-remapping not supported\n"); - return 0; + return -1; } if (!x2apic_preenabled && skip_ioapic_setup) { pr_info("Skipped enabling intr-remap because of skipping " "io-apic setup\n"); - return 0; + return -1; } - if (enable_intr_remapping(x2apic_supported())) - return 0; - - pr_info("Enabled Interrupt-remapping\n"); - - return 1; - + return enable_intr_remapping(); #endif - return 0; + return -1; } void __init enable_IR_x2apic(void) @@ -1481,11 +1475,11 @@ void __init enable_IR_x2apic(void) mask_ioapic_entries(); if (dmar_table_init_ret) - ret = 0; + ret = -1; else ret = enable_IR(); - if (!ret) { + if (ret < 0) { /* IR is required if there is APIC ID > 255 even when running * under KVM */ @@ -1499,6 +1493,9 @@ void __init enable_IR_x2apic(void) x2apic_force_phys(); } + if (ret == IRQ_REMAP_XAPIC_MODE) + goto nox2apic; + x2apic_enabled = 1; if (x2apic_supported() && !x2apic_mode) { @@ -1508,19 +1505,21 @@ void __init enable_IR_x2apic(void) } nox2apic: - if (!ret) /* IR enabling failed */ + if (ret < 0) /* IR enabling failed */ restore_ioapic_entries(); legacy_pic->restore_mask(); local_irq_restore(flags); out: - if (x2apic_enabled) + if (x2apic_enabled || !x2apic_supported()) return; if (x2apic_preenabled) panic("x2apic: enabled by BIOS but kernel init failed."); - else if (cpu_has_x2apic) - pr_info("Not enabling x2apic, Intr-remapping init failed.\n"); + else if (ret == IRQ_REMAP_XAPIC_MODE) + pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n"); + else if (ret < 0) + pr_info("x2apic not enabled, IRQ remapping init failed\n"); } #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index efd737e827f4..521bead01137 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -255,12 +255,24 @@ static struct apic apic_bigsmp = { .x86_32_early_logical_apicid = bigsmp_early_logical_apicid, }; -struct apic * __init generic_bigsmp_probe(void) +void __init generic_bigsmp_probe(void) { - if (probe_bigsmp()) - return &apic_bigsmp; + unsigned int cpu; - return NULL; + if (!probe_bigsmp()) + return; + + apic = &apic_bigsmp; + + for_each_possible_cpu(cpu) { + if (early_per_cpu(x86_cpu_to_logical_apicid, + cpu) == BAD_APICID) + continue; + early_per_cpu(x86_cpu_to_logical_apicid, cpu) = + bigsmp_early_logical_apicid(cpu); + } + + pr_info("Overriding APIC driver with %s\n", apic_bigsmp.name); } apic_driver(apic_bigsmp); diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index d5e57db0f7be..31cb9ae992b7 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -60,22 +60,10 @@ void arch_trigger_all_cpu_backtrace(void) } static int __kprobes -arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, - unsigned long cmd, void *__args) +arch_trigger_all_cpu_backtrace_handler(unsigned int cmd, struct pt_regs *regs) { - struct die_args *args = __args; - struct pt_regs *regs; int cpu; - switch (cmd) { - case DIE_NMI: - break; - - default: - return NOTIFY_DONE; - } - - regs = args->regs; cpu = smp_processor_id(); if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) { @@ -86,21 +74,16 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, show_regs(regs); arch_spin_unlock(&lock); cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask)); - return NOTIFY_STOP; + return NMI_HANDLED; } - return NOTIFY_DONE; + return NMI_DONE; } -static __read_mostly struct notifier_block backtrace_notifier = { - .notifier_call = arch_trigger_all_cpu_backtrace_handler, - .next = NULL, - .priority = NMI_LOCAL_LOW_PRIOR, -}; - static int __init register_trigger_all_cpu_backtrace(void) { - register_die_notifier(&backtrace_notifier); + register_nmi_handler(NMI_LOCAL, arch_trigger_all_cpu_backtrace_handler, + 0, "arch_bt"); return 0; } early_initcall(register_trigger_all_cpu_backtrace); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 8eb863e27ea6..3c31fa98af6d 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -92,21 +92,21 @@ static struct ioapic { DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); } ioapics[MAX_IO_APICS]; -#define mpc_ioapic_ver(id) ioapics[id].mp_config.apicver +#define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver -int mpc_ioapic_id(int id) +int mpc_ioapic_id(int ioapic_idx) { - return ioapics[id].mp_config.apicid; + return ioapics[ioapic_idx].mp_config.apicid; } -unsigned int mpc_ioapic_addr(int id) +unsigned int mpc_ioapic_addr(int ioapic_idx) { - return ioapics[id].mp_config.apicaddr; + return ioapics[ioapic_idx].mp_config.apicaddr; } -struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int id) +struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) { - return &ioapics[id].gsi_config; + return &ioapics[ioapic_idx].gsi_config; } int nr_ioapics; @@ -186,11 +186,7 @@ static struct irq_pin_list *alloc_irq_pin_list(int node) /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -#ifdef CONFIG_SPARSE_IRQ static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY]; -#else -static struct irq_cfg irq_cfgx[NR_IRQS]; -#endif int __init arch_early_irq_init(void) { @@ -234,7 +230,6 @@ int __init arch_early_irq_init(void) return 0; } -#ifdef CONFIG_SPARSE_IRQ static struct irq_cfg *irq_cfg(unsigned int irq) { return irq_get_chip_data(irq); @@ -269,22 +264,6 @@ static void free_irq_cfg(unsigned int at, struct irq_cfg *cfg) kfree(cfg); } -#else - -struct irq_cfg *irq_cfg(unsigned int irq) -{ - return irq < nr_irqs ? irq_cfgx + irq : NULL; -} - -static struct irq_cfg *alloc_irq_cfg(unsigned int irq, int node) -{ - return irq_cfgx + irq; -} - -static inline void free_irq_cfg(unsigned int at, struct irq_cfg *cfg) { } - -#endif - static struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node) { int res = irq_alloc_desc_at(at, node); @@ -394,13 +373,21 @@ union entry_union { struct IO_APIC_route_entry entry; }; +static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + return eu.entry; +} + static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) { union entry_union eu; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); - eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); - eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + eu.entry = __ioapic_read_entry(apic, pin); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return eu.entry; } @@ -529,18 +516,6 @@ static void io_apic_modify_irq(struct irq_cfg *cfg, __io_apic_modify_irq(entry, mask_and, mask_or, final); } -static void __mask_and_edge_IO_APIC_irq(struct irq_pin_list *entry) -{ - __io_apic_modify_irq(entry, ~IO_APIC_REDIR_LEVEL_TRIGGER, - IO_APIC_REDIR_MASKED, NULL); -} - -static void __unmask_and_level_IO_APIC_irq(struct irq_pin_list *entry) -{ - __io_apic_modify_irq(entry, ~IO_APIC_REDIR_MASKED, - IO_APIC_REDIR_LEVEL_TRIGGER, NULL); -} - static void io_apic_sync(struct irq_pin_list *entry) { /* @@ -585,6 +560,66 @@ static void unmask_ioapic_irq(struct irq_data *data) unmask_ioapic(data->chip_data); } +/* + * IO-APIC versions below 0x20 don't support EOI register. + * For the record, here is the information about various versions: + * 0Xh 82489DX + * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant + * 2Xh I/O(x)APIC which is PCI 2.2 Compliant + * 30h-FFh Reserved + * + * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic + * version as 0x2. This is an error with documentation and these ICH chips + * use io-apic's of version 0x20. + * + * For IO-APIC's with EOI register, we use that to do an explicit EOI. + * Otherwise, we simulate the EOI message manually by changing the trigger + * mode to edge and then back to level, with RTE being masked during this. + */ +static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg) +{ + if (mpc_ioapic_ver(apic) >= 0x20) { + /* + * Intr-remapping uses pin number as the virtual vector + * in the RTE. Actual vector is programmed in + * intr-remapping table entry. Hence for the io-apic + * EOI we use the pin number. + */ + if (cfg && irq_remapped(cfg)) + io_apic_eoi(apic, pin); + else + io_apic_eoi(apic, vector); + } else { + struct IO_APIC_route_entry entry, entry1; + + entry = entry1 = __ioapic_read_entry(apic, pin); + + /* + * Mask the entry and change the trigger mode to edge. + */ + entry1.mask = 1; + entry1.trigger = IOAPIC_EDGE; + + __ioapic_write_entry(apic, pin, entry1); + + /* + * Restore the previous level triggered entry. + */ + __ioapic_write_entry(apic, pin, entry); + } +} + +static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) +{ + struct irq_pin_list *entry; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + for_each_irq_pin(entry, cfg->irq_2_pin) + __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; @@ -593,10 +628,44 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; + + /* + * Make sure the entry is masked and re-read the contents to check + * if it is a level triggered pin and if the remote-IRR is set. + */ + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + entry = ioapic_read_entry(apic, pin); + } + + if (entry.irr) { + unsigned long flags; + + /* + * Make sure the trigger mode is set to level. Explicit EOI + * doesn't clear the remote-IRR if the trigger mode is not + * set to level. + */ + if (!entry.trigger) { + entry.trigger = IOAPIC_LEVEL; + ioapic_write_entry(apic, pin, entry); + } + + raw_spin_lock_irqsave(&ioapic_lock, flags); + __eoi_ioapic_pin(apic, pin, entry.vector, NULL); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + } + /* - * Disable it in the IO-APIC irq-routing table: + * Clear the rest of the bits in the IO-APIC RTE except for the mask + * bit. */ ioapic_mask_entry(apic, pin); + entry = ioapic_read_entry(apic, pin); + if (entry.irr) + printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n", + mpc_ioapic_id(apic), pin); } static void clear_IO_APIC (void) @@ -712,13 +781,13 @@ int restore_ioapic_entries(void) /* * Find the IRQ entry number of a certain pin. */ -static int find_irq_entry(int apic, int pin, int type) +static int find_irq_entry(int ioapic_idx, int pin, int type) { int i; for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].irqtype == type && - (mp_irqs[i].dstapic == mpc_ioapic_id(apic) || + (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || mp_irqs[i].dstapic == MP_APIC_ALL) && mp_irqs[i].dstirq == pin) return i; @@ -757,12 +826,13 @@ static int __init find_isa_irq_apic(int irq, int type) (mp_irqs[i].srcbusirq == irq)) break; } + if (i < mp_irq_entries) { - int apic; - for(apic = 0; apic < nr_ioapics; apic++) { - if (mpc_ioapic_id(apic) == mp_irqs[i].dstapic) - return apic; - } + int ioapic_idx; + + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) + if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) + return ioapic_idx; } return -1; @@ -977,7 +1047,7 @@ static int pin_2_irq(int idx, int apic, int pin) int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, struct io_apic_irq_attr *irq_attr) { - int apic, i, best_guess = -1; + int ioapic_idx, i, best_guess = -1; apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", @@ -990,8 +1060,8 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; - for (apic = 0; apic < nr_ioapics; apic++) - if (mpc_ioapic_id(apic) == mp_irqs[i].dstapic || + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) + if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || mp_irqs[i].dstapic == MP_APIC_ALL) break; @@ -999,13 +1069,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, !mp_irqs[i].irqtype && (bus == lbus) && (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); + int irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq); - if (!(apic || IO_APIC_IRQ(irq))) + if (!(ioapic_idx || IO_APIC_IRQ(irq))) continue; if (pin == (mp_irqs[i].srcbusirq & 3)) { - set_io_apic_irq_attr(irq_attr, apic, + set_io_apic_irq_attr(irq_attr, ioapic_idx, mp_irqs[i].dstirq, irq_trigger(i), irq_polarity(i)); @@ -1016,7 +1086,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, * best-guess fuzzy result for broken mptables. */ if (best_guess < 0) { - set_io_apic_irq_attr(irq_attr, apic, + set_io_apic_irq_attr(irq_attr, ioapic_idx, mp_irqs[i].dstirq, irq_trigger(i), irq_polarity(i)); @@ -1202,7 +1272,6 @@ void __setup_vector_irq(int cpu) } static struct irq_chip ioapic_chip; -static struct irq_chip ir_ioapic_chip; #ifdef CONFIG_X86_32 static inline int IO_APIC_irq_trigger(int irq) @@ -1246,7 +1315,7 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg, if (irq_remapped(cfg)) { irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); - chip = &ir_ioapic_chip; + irq_remap_modify_chip_defaults(chip); fasteoi = trigger != 0; } @@ -1255,77 +1324,100 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg, fasteoi ? "fasteoi" : "edge"); } -static int setup_ioapic_entry(int apic_id, int irq, - struct IO_APIC_route_entry *entry, - unsigned int destination, int trigger, - int polarity, int vector, int pin) + +static int setup_ir_ioapic_entry(int irq, + struct IR_IO_APIC_route_entry *entry, + unsigned int destination, int vector, + struct io_apic_irq_attr *attr) { - /* - * add it to the IO-APIC irq-routing table: - */ - memset(entry,0,sizeof(*entry)); + int index; + struct irte irte; + int ioapic_id = mpc_ioapic_id(attr->ioapic); + struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id); - if (intr_remapping_enabled) { - struct intel_iommu *iommu = map_ioapic_to_ir(apic_id); - struct irte irte; - struct IR_IO_APIC_route_entry *ir_entry = - (struct IR_IO_APIC_route_entry *) entry; - int index; + if (!iommu) { + pr_warn("No mapping iommu for ioapic %d\n", ioapic_id); + return -ENODEV; + } - if (!iommu) - panic("No mapping iommu for ioapic %d\n", apic_id); + index = alloc_irte(iommu, irq, 1); + if (index < 0) { + pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id); + return -ENOMEM; + } - index = alloc_irte(iommu, irq, 1); - if (index < 0) - panic("Failed to allocate IRTE for ioapic %d\n", apic_id); + prepare_irte(&irte, vector, destination); - prepare_irte(&irte, vector, destination); + /* Set source-id of interrupt request */ + set_ioapic_sid(&irte, ioapic_id); - /* Set source-id of interrupt request */ - set_ioapic_sid(&irte, apic_id); + modify_irte(irq, &irte); - modify_irte(irq, &irte); + apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: " + "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d " + "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X " + "Avail:%X Vector:%02X Dest:%08X " + "SID:%04X SQ:%X SVT:%X)\n", + attr->ioapic, irte.present, irte.fpd, irte.dst_mode, + irte.redir_hint, irte.trigger_mode, irte.dlvry_mode, + irte.avail, irte.vector, irte.dest_id, + irte.sid, irte.sq, irte.svt); + + memset(entry, 0, sizeof(*entry)); + + entry->index2 = (index >> 15) & 0x1; + entry->zero = 0; + entry->format = 1; + entry->index = (index & 0x7fff); + /* + * IO-APIC RTE will be configured with virtual vector. + * irq handler will do the explicit EOI to the io-apic. + */ + entry->vector = attr->ioapic_pin; + entry->mask = 0; /* enable IRQ */ + entry->trigger = attr->trigger; + entry->polarity = attr->polarity; - ir_entry->index2 = (index >> 15) & 0x1; - ir_entry->zero = 0; - ir_entry->format = 1; - ir_entry->index = (index & 0x7fff); - /* - * IO-APIC RTE will be configured with virtual vector. - * irq handler will do the explicit EOI to the io-apic. - */ - ir_entry->vector = pin; - - apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: " - "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d " - "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X " - "Avail:%X Vector:%02X Dest:%08X " - "SID:%04X SQ:%X SVT:%X)\n", - apic_id, irte.present, irte.fpd, irte.dst_mode, - irte.redir_hint, irte.trigger_mode, irte.dlvry_mode, - irte.avail, irte.vector, irte.dest_id, - irte.sid, irte.sq, irte.svt); - } else { - entry->delivery_mode = apic->irq_delivery_mode; - entry->dest_mode = apic->irq_dest_mode; - entry->dest = destination; - entry->vector = vector; - } + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (attr->trigger) + entry->mask = 1; - entry->mask = 0; /* enable IRQ */ - entry->trigger = trigger; - entry->polarity = polarity; + return 0; +} - /* Mask level triggered irqs. +static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry, + unsigned int destination, int vector, + struct io_apic_irq_attr *attr) +{ + if (intr_remapping_enabled) + return setup_ir_ioapic_entry(irq, + (struct IR_IO_APIC_route_entry *)entry, + destination, vector, attr); + + memset(entry, 0, sizeof(*entry)); + + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->dest = destination; + entry->vector = vector; + entry->mask = 0; /* enable IRQ */ + entry->trigger = attr->trigger; + entry->polarity = attr->polarity; + + /* + * Mask level triggered irqs. * Use IRQ_DELAYED_DISABLE for edge triggered irqs. */ - if (trigger) + if (attr->trigger) entry->mask = 1; + return 0; } -static void setup_ioapic_irq(int apic_id, int pin, unsigned int irq, - struct irq_cfg *cfg, int trigger, int polarity) +static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, + struct io_apic_irq_attr *attr) { struct IO_APIC_route_entry entry; unsigned int dest; @@ -1348,49 +1440,48 @@ static void setup_ioapic_irq(int apic_id, int pin, unsigned int irq, apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i Dest:%d)\n", - apic_id, mpc_ioapic_id(apic_id), pin, cfg->vector, - irq, trigger, polarity, dest); - + attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin, + cfg->vector, irq, attr->trigger, attr->polarity, dest); - if (setup_ioapic_entry(mpc_ioapic_id(apic_id), irq, &entry, - dest, trigger, polarity, cfg->vector, pin)) { - printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", - mpc_ioapic_id(apic_id), pin); + if (setup_ioapic_entry(irq, &entry, dest, cfg->vector, attr)) { + pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mpc_ioapic_id(attr->ioapic), attr->ioapic_pin); __clear_irq_vector(irq, cfg); + return; } - ioapic_register_intr(irq, cfg, trigger); + ioapic_register_intr(irq, cfg, attr->trigger); if (irq < legacy_pic->nr_legacy_irqs) legacy_pic->mask(irq); - ioapic_write_entry(apic_id, pin, entry); + ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry); } -static bool __init io_apic_pin_not_connected(int idx, int apic_id, int pin) +static bool __init io_apic_pin_not_connected(int idx, int ioapic_idx, int pin) { if (idx != -1) return false; apic_printk(APIC_VERBOSE, KERN_DEBUG " apic %d pin %d not connected\n", - mpc_ioapic_id(apic_id), pin); + mpc_ioapic_id(ioapic_idx), pin); return true; } -static void __init __io_apic_setup_irqs(unsigned int apic_id) +static void __init __io_apic_setup_irqs(unsigned int ioapic_idx) { int idx, node = cpu_to_node(0); struct io_apic_irq_attr attr; unsigned int pin, irq; - for (pin = 0; pin < ioapics[apic_id].nr_registers; pin++) { - idx = find_irq_entry(apic_id, pin, mp_INT); - if (io_apic_pin_not_connected(idx, apic_id, pin)) + for (pin = 0; pin < ioapics[ioapic_idx].nr_registers; pin++) { + idx = find_irq_entry(ioapic_idx, pin, mp_INT); + if (io_apic_pin_not_connected(idx, ioapic_idx, pin)) continue; - irq = pin_2_irq(idx, apic_id, pin); + irq = pin_2_irq(idx, ioapic_idx, pin); - if ((apic_id > 0) && (irq > 16)) + if ((ioapic_idx > 0) && (irq > 16)) continue; /* @@ -1398,10 +1489,10 @@ static void __init __io_apic_setup_irqs(unsigned int apic_id) * installed and if it returns 1: */ if (apic->multi_timer_check && - apic->multi_timer_check(apic_id, irq)) + apic->multi_timer_check(ioapic_idx, irq)) continue; - set_io_apic_irq_attr(&attr, apic_id, pin, irq_trigger(idx), + set_io_apic_irq_attr(&attr, ioapic_idx, pin, irq_trigger(idx), irq_polarity(idx)); io_apic_setup_irq_pin(irq, node, &attr); @@ -1410,12 +1501,12 @@ static void __init __io_apic_setup_irqs(unsigned int apic_id) static void __init setup_IO_APIC_irqs(void) { - unsigned int apic_id; + unsigned int ioapic_idx; apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - for (apic_id = 0; apic_id < nr_ioapics; apic_id++) - __io_apic_setup_irqs(apic_id); + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) + __io_apic_setup_irqs(ioapic_idx); } /* @@ -1425,28 +1516,28 @@ static void __init setup_IO_APIC_irqs(void) */ void setup_IO_APIC_irq_extra(u32 gsi) { - int apic_id = 0, pin, idx, irq, node = cpu_to_node(0); + int ioapic_idx = 0, pin, idx, irq, node = cpu_to_node(0); struct io_apic_irq_attr attr; /* * Convert 'gsi' to 'ioapic.pin'. */ - apic_id = mp_find_ioapic(gsi); - if (apic_id < 0) + ioapic_idx = mp_find_ioapic(gsi); + if (ioapic_idx < 0) return; - pin = mp_find_ioapic_pin(apic_id, gsi); - idx = find_irq_entry(apic_id, pin, mp_INT); + pin = mp_find_ioapic_pin(ioapic_idx, gsi); + idx = find_irq_entry(ioapic_idx, pin, mp_INT); if (idx == -1) return; - irq = pin_2_irq(idx, apic_id, pin); + irq = pin_2_irq(idx, ioapic_idx, pin); /* Only handle the non legacy irqs on secondary ioapics */ - if (apic_id == 0 || irq < NR_IRQS_LEGACY) + if (ioapic_idx == 0 || irq < NR_IRQS_LEGACY) return; - set_io_apic_irq_attr(&attr, apic_id, pin, irq_trigger(idx), + set_io_apic_irq_attr(&attr, ioapic_idx, pin, irq_trigger(idx), irq_polarity(idx)); io_apic_setup_irq_pin_once(irq, node, &attr); @@ -1455,8 +1546,8 @@ void setup_IO_APIC_irq_extra(u32 gsi) /* * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin, - int vector) +static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx, + unsigned int pin, int vector) { struct IO_APIC_route_entry entry; @@ -1487,45 +1578,29 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin, /* * Add it to the IO-APIC irq-routing table: */ - ioapic_write_entry(apic_id, pin, entry); + ioapic_write_entry(ioapic_idx, pin, entry); } - -__apicdebuginit(void) print_IO_APIC(void) +__apicdebuginit(void) print_IO_APIC(int ioapic_idx) { - int apic, i; + int i; union IO_APIC_reg_00 reg_00; union IO_APIC_reg_01 reg_01; union IO_APIC_reg_02 reg_02; union IO_APIC_reg_03 reg_03; unsigned long flags; - struct irq_cfg *cfg; - unsigned int irq; - - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); - for (i = 0; i < nr_ioapics; i++) - printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mpc_ioapic_id(i), ioapics[i].nr_registers); - - /* - * We are a bit conservative about what we expect. We have to - * know about every hardware change ASAP. - */ - printk(KERN_INFO "testing the IO APIC.......................\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { raw_spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - reg_01.raw = io_apic_read(apic, 1); + reg_00.raw = io_apic_read(ioapic_idx, 0); + reg_01.raw = io_apic_read(ioapic_idx, 1); if (reg_01.bits.version >= 0x10) - reg_02.raw = io_apic_read(apic, 2); + reg_02.raw = io_apic_read(ioapic_idx, 2); if (reg_01.bits.version >= 0x20) - reg_03.raw = io_apic_read(apic, 3); + reg_03.raw = io_apic_read(ioapic_idx, 3); raw_spin_unlock_irqrestore(&ioapic_lock, flags); printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(apic)); + printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); @@ -1575,7 +1650,7 @@ __apicdebuginit(void) print_IO_APIC(void) struct IO_APIC_route_entry entry; struct IR_IO_APIC_route_entry *ir_entry; - entry = ioapic_read_entry(apic, i); + entry = ioapic_read_entry(ioapic_idx, i); ir_entry = (struct IR_IO_APIC_route_entry *) &entry; printk(KERN_DEBUG " %02x %04X ", i, @@ -1596,7 +1671,7 @@ __apicdebuginit(void) print_IO_APIC(void) } else { struct IO_APIC_route_entry entry; - entry = ioapic_read_entry(apic, i); + entry = ioapic_read_entry(ioapic_idx, i); printk(KERN_DEBUG " %02x %02X ", i, entry.dest @@ -1614,7 +1689,28 @@ __apicdebuginit(void) print_IO_APIC(void) ); } } - } +} + +__apicdebuginit(void) print_IO_APICs(void) +{ + int ioapic_idx; + struct irq_cfg *cfg; + unsigned int irq; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mpc_ioapic_id(ioapic_idx), + ioapics[ioapic_idx].nr_registers); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) + print_IO_APIC(ioapic_idx); printk(KERN_DEBUG "IRQ to pin mappings:\n"); for_each_active_irq(irq) { @@ -1633,8 +1729,6 @@ __apicdebuginit(void) print_IO_APIC(void) } printk(KERN_INFO ".................................... done.\n"); - - return; } __apicdebuginit(void) print_APIC_field(int base) @@ -1828,7 +1922,7 @@ __apicdebuginit(int) print_ICs(void) return 0; print_local_APICs(show_lapic); - print_IO_APIC(); + print_IO_APICs(); return 0; } @@ -1953,7 +2047,7 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; - int apic_id; + int ioapic_idx; int i; unsigned char old_id; unsigned long flags; @@ -1967,21 +2061,20 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void) /* * Set the IOAPIC ID to the value stored in the MPC table. */ - for (apic_id = 0; apic_id < nr_ioapics; apic_id++) { - + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { /* Read the register 0 value */ raw_spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic_id, 0); + reg_00.raw = io_apic_read(ioapic_idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); - old_id = mpc_ioapic_id(apic_id); + old_id = mpc_ioapic_id(ioapic_idx); - if (mpc_ioapic_id(apic_id) >= get_physical_broadcast()) { + if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic_id, mpc_ioapic_id(apic_id)); + ioapic_idx, mpc_ioapic_id(ioapic_idx)); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); - ioapics[apic_id].mp_config.apicid = reg_00.bits.ID; + ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; } /* @@ -1990,9 +2083,9 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void) * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (apic->check_apicid_used(&phys_id_present_map, - mpc_ioapic_id(apic_id))) { + mpc_ioapic_id(ioapic_idx))) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic_id, mpc_ioapic_id(apic_id)); + ioapic_idx, mpc_ioapic_id(ioapic_idx)); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; @@ -2001,14 +2094,14 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void) printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); - ioapics[apic_id].mp_config.apicid = i; + ioapics[ioapic_idx].mp_config.apicid = i; } else { physid_mask_t tmp; - apic->apicid_to_cpu_present(mpc_ioapic_id(apic_id), + apic->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx), &tmp); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", - mpc_ioapic_id(apic_id)); + mpc_ioapic_id(ioapic_idx)); physids_or(phys_id_present_map, phys_id_present_map, tmp); } @@ -2016,35 +2109,35 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void) * We need to adjust the IRQ routing table * if the ID changed. */ - if (old_id != mpc_ioapic_id(apic_id)) + if (old_id != mpc_ioapic_id(ioapic_idx)) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].dstapic == old_id) mp_irqs[i].dstapic - = mpc_ioapic_id(apic_id); + = mpc_ioapic_id(ioapic_idx); /* * Update the ID register according to the right value * from the MPC table if they are different. */ - if (mpc_ioapic_id(apic_id) == reg_00.bits.ID) + if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) continue; apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mpc_ioapic_id(apic_id)); + mpc_ioapic_id(ioapic_idx)); - reg_00.bits.ID = mpc_ioapic_id(apic_id); + reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); raw_spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic_id, 0, reg_00.raw); + io_apic_write(ioapic_idx, 0, reg_00.raw); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* * Sanity check */ raw_spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic_id, 0); + reg_00.raw = io_apic_read(ioapic_idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mpc_ioapic_id(apic_id)) + if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) printk("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); @@ -2255,7 +2348,7 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, return ret; } -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP /* * Migrate the IO-APIC irq in the presence of intr-remapping. @@ -2267,6 +2360,9 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, * updated vector information), by using a virtual vector (io-apic pin number). * Real vector that is used for interrupting cpu will be coming from * the interrupt-remapping table entry. + * + * As the migration is a simple atomic update of IRTE, the same mechanism + * is used to migrate MSI irq's in the presence of interrupt-remapping. */ static int ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, @@ -2291,10 +2387,16 @@ ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, irte.dest_id = IRTE_DEST(dest); /* - * Modified the IRTE and flushes the Interrupt entry cache. + * Atomically updates the IRTE with the new destination, vector + * and flushes the interrupt entry cache. */ modify_irte(irq, &irte); + /* + * After this point, all the interrupts will start arriving + * at the new destination. So, time to cleanup the previous + * vector allocation. + */ if (cfg->move_in_progress) send_cleanup_vector(cfg); @@ -2407,48 +2509,6 @@ static void ack_apic_edge(struct irq_data *data) atomic_t irq_mis_count; -/* - * IO-APIC versions below 0x20 don't support EOI register. - * For the record, here is the information about various versions: - * 0Xh 82489DX - * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant - * 2Xh I/O(x)APIC which is PCI 2.2 Compliant - * 30h-FFh Reserved - * - * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic - * version as 0x2. This is an error with documentation and these ICH chips - * use io-apic's of version 0x20. - * - * For IO-APIC's with EOI register, we use that to do an explicit EOI. - * Otherwise, we simulate the EOI message manually by changing the trigger - * mode to edge and then back to level, with RTE being masked during this. -*/ -static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) -{ - struct irq_pin_list *entry; - unsigned long flags; - - raw_spin_lock_irqsave(&ioapic_lock, flags); - for_each_irq_pin(entry, cfg->irq_2_pin) { - if (mpc_ioapic_ver(entry->apic) >= 0x20) { - /* - * Intr-remapping uses pin number as the virtual vector - * in the RTE. Actual vector is programmed in - * intr-remapping table entry. Hence for the io-apic - * EOI we use the pin number. - */ - if (irq_remapped(cfg)) - io_apic_eoi(entry->apic, entry->pin); - else - io_apic_eoi(entry->apic, cfg->vector); - } else { - __mask_and_edge_IO_APIC_irq(entry); - __unmask_and_level_IO_APIC_irq(entry); - } - } - raw_spin_unlock_irqrestore(&ioapic_lock, flags); -} - static void ack_apic_level(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; @@ -2552,7 +2612,7 @@ static void ack_apic_level(struct irq_data *data) } } -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP static void ir_ack_apic_edge(struct irq_data *data) { ack_APIC_irq(); @@ -2563,7 +2623,23 @@ static void ir_ack_apic_level(struct irq_data *data) ack_APIC_irq(); eoi_ioapic_irq(data->irq, data->chip_data); } -#endif /* CONFIG_INTR_REMAP */ + +static void ir_print_prefix(struct irq_data *data, struct seq_file *p) +{ + seq_printf(p, " IR-%s", data->chip->name); +} + +static void irq_remap_modify_chip_defaults(struct irq_chip *chip) +{ + chip->irq_print_chip = ir_print_prefix; + chip->irq_ack = ir_ack_apic_edge; + chip->irq_eoi = ir_ack_apic_level; + +#ifdef CONFIG_SMP + chip->irq_set_affinity = ir_ioapic_set_affinity; +#endif +} +#endif /* CONFIG_IRQ_REMAP */ static struct irq_chip ioapic_chip __read_mostly = { .name = "IO-APIC", @@ -2578,21 +2654,6 @@ static struct irq_chip ioapic_chip __read_mostly = { .irq_retrigger = ioapic_retrigger_irq, }; -static struct irq_chip ir_ioapic_chip __read_mostly = { - .name = "IR-IO-APIC", - .irq_startup = startup_ioapic_irq, - .irq_mask = mask_ioapic_irq, - .irq_unmask = unmask_ioapic_irq, -#ifdef CONFIG_INTR_REMAP - .irq_ack = ir_ack_apic_edge, - .irq_eoi = ir_ack_apic_level, -#ifdef CONFIG_SMP - .irq_set_affinity = ir_ioapic_set_affinity, -#endif -#endif - .irq_retrigger = ioapic_retrigger_irq, -}; - static inline void init_IO_APIC_traps(void) { struct irq_cfg *cfg; @@ -2944,27 +3005,26 @@ static int __init io_apic_bug_finalize(void) late_initcall(io_apic_bug_finalize); -static void resume_ioapic_id(int ioapic_id) +static void resume_ioapic_id(int ioapic_idx) { unsigned long flags; union IO_APIC_reg_00 reg_00; - raw_spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(ioapic_id, 0); - if (reg_00.bits.ID != mpc_ioapic_id(ioapic_id)) { - reg_00.bits.ID = mpc_ioapic_id(ioapic_id); - io_apic_write(ioapic_id, 0, reg_00.raw); + reg_00.raw = io_apic_read(ioapic_idx, 0); + if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { + reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); + io_apic_write(ioapic_idx, 0, reg_00.raw); } raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void ioapic_resume(void) { - int ioapic_id; + int ioapic_idx; - for (ioapic_id = nr_ioapics - 1; ioapic_id >= 0; ioapic_id--) - resume_ioapic_id(ioapic_id); + for (ioapic_idx = nr_ioapics - 1; ioapic_idx >= 0; ioapic_idx--) + resume_ioapic_id(ioapic_idx); restore_ioapic_entries(); } @@ -3144,45 +3204,6 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) return 0; } -#ifdef CONFIG_INTR_REMAP -/* - * Migrate the MSI irq to another cpumask. This migration is - * done in the process context using interrupt-remapping hardware. - */ -static int -ir_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, - bool force) -{ - struct irq_cfg *cfg = data->chip_data; - unsigned int dest, irq = data->irq; - struct irte irte; - - if (get_irte(irq, &irte)) - return -1; - - if (__ioapic_set_affinity(data, mask, &dest)) - return -1; - - irte.vector = cfg->vector; - irte.dest_id = IRTE_DEST(dest); - - /* - * atomically update the IRTE with the new destination and vector. - */ - modify_irte(irq, &irte); - - /* - * After this point, all the interrupts will start arriving - * at the new destination. So, time to cleanup the previous - * vector allocation. - */ - if (cfg->move_in_progress) - send_cleanup_vector(cfg); - - return 0; -} - -#endif #endif /* CONFIG_SMP */ /* @@ -3200,19 +3221,6 @@ static struct irq_chip msi_chip = { .irq_retrigger = ioapic_retrigger_irq, }; -static struct irq_chip msi_ir_chip = { - .name = "IR-PCI-MSI", - .irq_unmask = unmask_msi_irq, - .irq_mask = mask_msi_irq, -#ifdef CONFIG_INTR_REMAP - .irq_ack = ir_ack_apic_edge, -#ifdef CONFIG_SMP - .irq_set_affinity = ir_msi_set_affinity, -#endif -#endif - .irq_retrigger = ioapic_retrigger_irq, -}; - /* * Map the PCI dev to the corresponding remapping hardware unit * and allocate 'nvec' consecutive interrupt-remapping table entries @@ -3255,7 +3263,7 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq) if (irq_remapped(irq_get_chip_data(irq))) { irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); - chip = &msi_ir_chip; + irq_remap_modify_chip_defaults(chip); } irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge"); @@ -3328,7 +3336,7 @@ void native_teardown_msi_irq(unsigned int irq) destroy_irq(irq); } -#if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP) +#ifdef CONFIG_DMAR_TABLE #ifdef CONFIG_SMP static int dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, @@ -3409,19 +3417,6 @@ static int hpet_msi_set_affinity(struct irq_data *data, #endif /* CONFIG_SMP */ -static struct irq_chip ir_hpet_msi_type = { - .name = "IR-HPET_MSI", - .irq_unmask = hpet_msi_unmask, - .irq_mask = hpet_msi_mask, -#ifdef CONFIG_INTR_REMAP - .irq_ack = ir_ack_apic_edge, -#ifdef CONFIG_SMP - .irq_set_affinity = ir_msi_set_affinity, -#endif -#endif - .irq_retrigger = ioapic_retrigger_irq, -}; - static struct irq_chip hpet_msi_type = { .name = "HPET_MSI", .irq_unmask = hpet_msi_unmask, @@ -3458,7 +3453,7 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id) hpet_msi_write(irq_get_handler_data(irq), &msg); irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); if (irq_remapped(irq_get_chip_data(irq))) - chip = &ir_hpet_msi_type; + irq_remap_modify_chip_defaults(chip); irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge"); return 0; @@ -3566,26 +3561,25 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return -EINVAL; ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin); if (!ret) - setup_ioapic_irq(attr->ioapic, attr->ioapic_pin, irq, cfg, - attr->trigger, attr->polarity); + setup_ioapic_irq(irq, cfg, attr); return ret; } int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr) { - unsigned int id = attr->ioapic, pin = attr->ioapic_pin; + unsigned int ioapic_idx = attr->ioapic, pin = attr->ioapic_pin; int ret; /* Avoid redundant programming */ - if (test_bit(pin, ioapics[id].pin_programmed)) { + if (test_bit(pin, ioapics[ioapic_idx].pin_programmed)) { pr_debug("Pin %d-%d already programmed\n", - mpc_ioapic_id(id), pin); + mpc_ioapic_id(ioapic_idx), pin); return 0; } ret = io_apic_setup_irq_pin(irq, node, attr); if (!ret) - set_bit(pin, ioapics[id].pin_programmed); + set_bit(pin, ioapics[ioapic_idx].pin_programmed); return ret; } @@ -3621,7 +3615,6 @@ int get_nr_irqs_gsi(void) return nr_irqs_gsi; } -#ifdef CONFIG_SPARSE_IRQ int __init arch_probe_nr_irqs(void) { int nr; @@ -3641,7 +3634,6 @@ int __init arch_probe_nr_irqs(void) return NR_IRQS_LEGACY; } -#endif int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr) diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index b5254ad044ab..0787bb3412f4 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -200,14 +200,8 @@ void __init default_setup_apic_routing(void) * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support */ - if (!cmdline_apic && apic == &apic_default) { - struct apic *bigsmp = generic_bigsmp_probe(); - if (bigsmp) { - apic = bigsmp; - printk(KERN_INFO "Overriding APIC driver with %s\n", - apic->name); - } - } + if (!cmdline_apic && apic == &apic_default) + generic_bigsmp_probe(); #endif if (apic->setup_apic_routing) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index adc66c3a1fef..62ae3001ae02 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -207,7 +207,6 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_INIT; uv_write_global_mmr64(pnode, UVH_IPI_INT, val); - mdelay(10); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | @@ -673,18 +672,11 @@ void __cpuinit uv_cpu_init(void) /* * When NMI is received, print a stack trace. */ -int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) +int uv_handle_nmi(unsigned int reason, struct pt_regs *regs) { unsigned long real_uv_nmi; int bid; - if (reason != DIE_NMIUNKNOWN) - return NOTIFY_OK; - - if (in_crash_kexec) - /* do nothing if entering the crash kernel */ - return NOTIFY_OK; - /* * Each blade has an MMR that indicates when an NMI has been sent * to cpus on the blade. If an NMI is detected, atomically @@ -705,7 +697,7 @@ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) } if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count)) - return NOTIFY_DONE; + return NMI_DONE; __get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count; @@ -718,17 +710,12 @@ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) dump_stack(); spin_unlock(&uv_nmi_lock); - return NOTIFY_STOP; + return NMI_HANDLED; } -static struct notifier_block uv_dump_stack_nmi_nb = { - .notifier_call = uv_handle_nmi, - .priority = NMI_LOCAL_LOW_PRIOR - 1, -}; - void uv_register_nmi_notifier(void) { - if (register_die_notifier(&uv_dump_stack_nmi_nb)) + if (register_nmi_handler(NMI_UNKNOWN, uv_handle_nmi, 0, "uv")) printk(KERN_WARNING "UV NMI handler failed to register\n"); } @@ -833,6 +820,10 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift; uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision; + uv_cpu_hub_info(cpu)->m_shift = 64 - m_val; + uv_cpu_hub_info(cpu)->n_lshift = is_uv2_1_hub() ? + (m_val == 40 ? 40 : 39) : m_val; + pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); lcpu = uv_blade_info[blade].nr_possible_cpus; @@ -863,8 +854,7 @@ void __init uv_system_init(void) if (uv_node_to_blade[nid] >= 0) continue; paddr = node_start_pfn(nid) << PAGE_SHIFT; - paddr = uv_soc_phys_ram_to_gpa(paddr); - pnode = (paddr >> m_val) & pnode_mask; + pnode = uv_gpa_to_pnode(uv_soc_phys_ram_to_gpa(paddr)); blade = boot_pnode_to_blade(pnode); uv_node_to_blade[nid] = blade; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0371c484bb8a..a46bd383953c 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -249,8 +249,6 @@ extern int (*console_blank_hook)(int); #define APM_MINOR_DEV 134 /* - * See Documentation/Config.help for the configuration options. - * * Various options can be changed at boot time as follows: * (We allow underscores for compatibility with the modules code) * apm=on/off enable/disable APM diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 6042981d0309..25f24dccdcfa 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -15,6 +15,7 @@ CFLAGS_common.o := $(nostackp) obj-y := intel_cacheinfo.o scattered.o topology.o obj-y += proc.o capflags.o powerflags.o common.o obj-y += vmware.o hypervisor.o sched.o mshyperv.o +obj-y += rdrand.o obj-$(CONFIG_X86_32) += bugs.o obj-$(CONFIG_X86_64) += bugs_64.o @@ -28,10 +29,15 @@ obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o +ifdef CONFIG_PERF_EVENTS +obj-$(CONFIG_CPU_SUP_AMD) += perf_event_amd.o +obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_p6.o perf_event_p4.o perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o +endif + obj-$(CONFIG_X86_MCE) += mcheck/ obj-$(CONFIG_MTRR) += mtrr/ -obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o +obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o perf_event_amd_ibs.o quiet_cmd_mkcapflags = MKCAP $@ cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@ diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index b13ed393dfce..46ae4f65fc7f 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1,5 +1,6 @@ #include <linux/init.h> #include <linux/bitops.h> +#include <linux/elf.h> #include <linux/mm.h> #include <linux/io.h> @@ -410,8 +411,38 @@ static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) #endif } +static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { + + if (c->x86 > 0x10 || + (c->x86 == 0x10 && c->x86_model >= 0x2)) { + u64 val; + + rdmsrl(MSR_K7_HWCR, val); + if (!(val & BIT(24))) + printk(KERN_WARNING FW_BUG "TSC doesn't count " + "with P0 frequency!\n"); + } + } + + if (c->x86 == 0x15) { + unsigned long upperbit; + u32 cpuid, assoc; + + cpuid = cpuid_edx(0x80000005); + assoc = cpuid >> 16 & 0xff; + upperbit = ((cpuid >> 24) << 10) / assoc; + + va_align.mask = (upperbit - 1) & PAGE_MASK; + va_align.flags = ALIGN_VA_32 | ALIGN_VA_64; + } +} + static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { + u32 dummy; + early_init_amd_mc(c); /* @@ -442,22 +473,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) } #endif - /* We need to do the following only once */ - if (c != &boot_cpu_data) - return; - - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { - - if (c->x86 > 0x10 || - (c->x86 == 0x10 && c->x86_model >= 0x2)) { - u64 val; - - rdmsrl(MSR_K7_HWCR, val); - if (!(val & BIT(24))) - printk(KERN_WARNING FW_BUG "TSC doesn't count " - "with P0 frequency!\n"); - } - } + rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) @@ -679,6 +695,7 @@ static const struct cpu_dev __cpuinitconst amd_cpu_dev = { .c_size_cache = amd_size_cache, #endif .c_early_init = early_init_amd, + .c_bsp_init = bsp_init_amd, .c_init = init_amd, .c_x86_vendor = X86_VENDOR_AMD, }; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 62184390a601..aa003b13a831 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -15,6 +15,7 @@ #include <asm/stackprotector.h> #include <asm/perf_event.h> #include <asm/mmu_context.h> +#include <asm/archrandom.h> #include <asm/hypervisor.h> #include <asm/processor.h> #include <asm/sections.h> @@ -681,6 +682,9 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c) filter_cpuid_features(c, false); setup_smep(c); + + if (this_cpu->c_bsp_init) + this_cpu->c_bsp_init(c); } void __init early_cpu_init(void) @@ -857,6 +861,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) #endif init_hypervisor(c); + x86_init_rdrand(c); /* * Clear/Set all flags overriden by options, need do it diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index e765633f210e..1b22dcc51af4 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -18,6 +18,7 @@ struct cpu_dev { struct cpu_model_info c_models[4]; void (*c_early_init)(struct cpuinfo_x86 *); + void (*c_bsp_init)(struct cpuinfo_x86 *); void (*c_init)(struct cpuinfo_x86 *); void (*c_identify)(struct cpuinfo_x86 *); unsigned int (*c_size_cache)(struct cpuinfo_x86 *, unsigned int); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index ed6086eedf1d..523131213f08 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -47,6 +47,15 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) { + unsigned lower_word; + + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + /* Required by the SDM */ + sync_core(); + rdmsr(MSR_IA32_UCODE_REV, lower_word, c->microcode); + } + /* * Atom erratum AAE44/AAF40/AAG38/AAH41: * @@ -55,17 +64,10 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) * need the microcode to have already been loaded... so if it is * not, recommend a BIOS update and disable large pages. */ - if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2) { - u32 ucode, junk; - - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - sync_core(); - rdmsr(MSR_IA32_UCODE_REV, junk, ucode); - - if (ucode < 0x20e) { - printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n"); - clear_cpu_cap(c, X86_FEATURE_PSE); - } + if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 && + c->microcode < 0x20e) { + printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n"); + clear_cpu_cap(c, X86_FEATURE_PSE); } #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index c105c533ed94..a3b0811693c9 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -151,28 +151,17 @@ union _cpuid4_leaf_ecx { u32 full; }; -struct amd_l3_cache { - struct amd_northbridge *nb; - unsigned indices; - u8 subcaches[4]; -}; - -struct _cpuid4_info { +struct _cpuid4_info_regs { union _cpuid4_leaf_eax eax; union _cpuid4_leaf_ebx ebx; union _cpuid4_leaf_ecx ecx; unsigned long size; - struct amd_l3_cache *l3; - DECLARE_BITMAP(shared_cpu_map, NR_CPUS); + struct amd_northbridge *nb; }; -/* subset of above _cpuid4_info w/o shared_cpu_map */ -struct _cpuid4_info_regs { - union _cpuid4_leaf_eax eax; - union _cpuid4_leaf_ebx ebx; - union _cpuid4_leaf_ecx ecx; - unsigned long size; - struct amd_l3_cache *l3; +struct _cpuid4_info { + struct _cpuid4_info_regs base; + DECLARE_BITMAP(shared_cpu_map, NR_CPUS); }; unsigned short num_cache_leaves; @@ -314,16 +303,23 @@ struct _cache_attr { /* * L3 cache descriptors */ -static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) +static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb) { + struct amd_l3_cache *l3 = &nb->l3_cache; unsigned int sc0, sc1, sc2, sc3; u32 val = 0; - pci_read_config_dword(l3->nb->misc, 0x1C4, &val); + pci_read_config_dword(nb->misc, 0x1C4, &val); /* calculate subcache sizes */ l3->subcaches[0] = sc0 = !(val & BIT(0)); l3->subcaches[1] = sc1 = !(val & BIT(4)); + + if (boot_cpu_data.x86 == 0x15) { + l3->subcaches[0] = sc0 += !(val & BIT(1)); + l3->subcaches[1] = sc1 += !(val & BIT(5)); + } + l3->subcaches[2] = sc2 = !(val & BIT(8)) + !(val & BIT(9)); l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13)); @@ -333,33 +329,16 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index) { - static struct amd_l3_cache *__cpuinitdata l3_caches; int node; /* only for L3, and not in virtualized environments */ - if (index < 3 || amd_nb_num() == 0) + if (index < 3) return; - /* - * Strictly speaking, the amount in @size below is leaked since it is - * never freed but this is done only on shutdown so it doesn't matter. - */ - if (!l3_caches) { - int size = amd_nb_num() * sizeof(struct amd_l3_cache); - - l3_caches = kzalloc(size, GFP_ATOMIC); - if (!l3_caches) - return; - } - node = amd_get_nb_id(smp_processor_id()); - - if (!l3_caches[node].nb) { - l3_caches[node].nb = node_to_amd_nb(node); - amd_calc_l3_indices(&l3_caches[node]); - } - - this_leaf->l3 = &l3_caches[node]; + this_leaf->nb = node_to_amd_nb(node); + if (this_leaf->nb && !this_leaf->nb->l3_cache.indices) + amd_calc_l3_indices(this_leaf->nb); } /* @@ -369,11 +348,11 @@ static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, * * @returns: the disabled index if used or negative value if slot free. */ -int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot) +int amd_get_l3_disable_slot(struct amd_northbridge *nb, unsigned slot) { unsigned int reg = 0; - pci_read_config_dword(l3->nb->misc, 0x1BC + slot * 4, ®); + pci_read_config_dword(nb->misc, 0x1BC + slot * 4, ®); /* check whether this slot is activated already */ if (reg & (3UL << 30)) @@ -387,11 +366,10 @@ static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf, { int index; - if (!this_leaf->l3 || - !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) + if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) return -EINVAL; - index = amd_get_l3_disable_slot(this_leaf->l3, slot); + index = amd_get_l3_disable_slot(this_leaf->base.nb, slot); if (index >= 0) return sprintf(buf, "%d\n", index); @@ -408,7 +386,7 @@ show_cache_disable_##slot(struct _cpuid4_info *this_leaf, char *buf, \ SHOW_CACHE_DISABLE(0) SHOW_CACHE_DISABLE(1) -static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, +static void amd_l3_disable_index(struct amd_northbridge *nb, int cpu, unsigned slot, unsigned long idx) { int i; @@ -421,10 +399,10 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, for (i = 0; i < 4; i++) { u32 reg = idx | (i << 20); - if (!l3->subcaches[i]) + if (!nb->l3_cache.subcaches[i]) continue; - pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg); + pci_write_config_dword(nb->misc, 0x1BC + slot * 4, reg); /* * We need to WBINVD on a core on the node containing the L3 @@ -434,7 +412,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, wbinvd_on_cpu(cpu); reg |= BIT(31); - pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg); + pci_write_config_dword(nb->misc, 0x1BC + slot * 4, reg); } } @@ -448,24 +426,24 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, * * @return: 0 on success, error status on failure */ -int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot, +int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot, unsigned long index) { int ret = 0; /* check if @slot is already used or the index is already disabled */ - ret = amd_get_l3_disable_slot(l3, slot); + ret = amd_get_l3_disable_slot(nb, slot); if (ret >= 0) return -EINVAL; - if (index > l3->indices) + if (index > nb->l3_cache.indices) return -EINVAL; /* check whether the other slot has disabled the same index already */ - if (index == amd_get_l3_disable_slot(l3, !slot)) + if (index == amd_get_l3_disable_slot(nb, !slot)) return -EINVAL; - amd_l3_disable_index(l3, cpu, slot, index); + amd_l3_disable_index(nb, cpu, slot, index); return 0; } @@ -480,8 +458,7 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!this_leaf->l3 || - !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) + if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) return -EINVAL; cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map)); @@ -489,7 +466,7 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, if (strict_strtoul(buf, 10, &val) < 0) return -EINVAL; - err = amd_set_l3_disable_slot(this_leaf->l3, cpu, slot, val); + err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val); if (err) { if (err == -EEXIST) printk(KERN_WARNING "L3 disable slot %d in use!\n", @@ -518,7 +495,7 @@ static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644, static ssize_t show_subcaches(struct _cpuid4_info *this_leaf, char *buf, unsigned int cpu) { - if (!this_leaf->l3 || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) return -EINVAL; return sprintf(buf, "%x\n", amd_get_subcaches(cpu)); @@ -533,7 +510,7 @@ store_subcaches(struct _cpuid4_info *this_leaf, const char *buf, size_t count, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!this_leaf->l3 || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) return -EINVAL; if (strict_strtoul(buf, 16, &val) < 0) @@ -769,7 +746,7 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) return; } this_leaf = CPUID4_INFO_IDX(cpu, index); - num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing; + num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing; if (num_threads_sharing == 1) cpumask_set_cpu(cpu, to_cpumask(this_leaf->shared_cpu_map)); @@ -820,29 +797,19 @@ static void __cpuinit free_cache_attributes(unsigned int cpu) for (i = 0; i < num_cache_leaves; i++) cache_remove_shared_cpu_map(cpu, i); - kfree(per_cpu(ici_cpuid4_info, cpu)->l3); kfree(per_cpu(ici_cpuid4_info, cpu)); per_cpu(ici_cpuid4_info, cpu) = NULL; } -static int -__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) -{ - struct _cpuid4_info_regs *leaf_regs = - (struct _cpuid4_info_regs *)this_leaf; - - return cpuid4_cache_lookup_regs(index, leaf_regs); -} - static void __cpuinit get_cpu_leaves(void *_retval) { int j, *retval = _retval, cpu = smp_processor_id(); /* Do cpuid and store the results */ for (j = 0; j < num_cache_leaves; j++) { - struct _cpuid4_info *this_leaf; - this_leaf = CPUID4_INFO_IDX(cpu, j); - *retval = cpuid4_cache_lookup(j, this_leaf); + struct _cpuid4_info *this_leaf = CPUID4_INFO_IDX(cpu, j); + + *retval = cpuid4_cache_lookup_regs(j, &this_leaf->base); if (unlikely(*retval < 0)) { int i; @@ -900,16 +867,16 @@ static ssize_t show_##file_name(struct _cpuid4_info *this_leaf, char *buf, \ return sprintf(buf, "%lu\n", (unsigned long)this_leaf->object + val); \ } -show_one_plus(level, eax.split.level, 0); -show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1); -show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1); -show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1); -show_one_plus(number_of_sets, ecx.split.number_of_sets, 1); +show_one_plus(level, base.eax.split.level, 0); +show_one_plus(coherency_line_size, base.ebx.split.coherency_line_size, 1); +show_one_plus(physical_line_partition, base.ebx.split.physical_line_partition, 1); +show_one_plus(ways_of_associativity, base.ebx.split.ways_of_associativity, 1); +show_one_plus(number_of_sets, base.ecx.split.number_of_sets, 1); static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf, unsigned int cpu) { - return sprintf(buf, "%luK\n", this_leaf->size / 1024); + return sprintf(buf, "%luK\n", this_leaf->base.size / 1024); } static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf, @@ -946,7 +913,7 @@ static inline ssize_t show_shared_cpu_list(struct _cpuid4_info *leaf, char *buf, static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf, unsigned int cpu) { - switch (this_leaf->eax.split.type) { + switch (this_leaf->base.eax.split.type) { case CACHE_TYPE_DATA: return sprintf(buf, "Data\n"); case CACHE_TYPE_INST: @@ -1135,7 +1102,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) ktype_cache.default_attrs = default_attrs; #ifdef CONFIG_AMD_NB - if (this_leaf->l3) + if (this_leaf->base.nb) ktype_cache.default_attrs = amd_l3_attrs(); #endif retval = kobject_init_and_add(&(this_object->kobj), diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c index 0ed633c5048b..6199232161cf 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-inject.c +++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c @@ -78,27 +78,20 @@ static void raise_exception(struct mce *m, struct pt_regs *pregs) static cpumask_var_t mce_inject_cpumask; -static int mce_raise_notify(struct notifier_block *self, - unsigned long val, void *data) +static int mce_raise_notify(unsigned int cmd, struct pt_regs *regs) { - struct die_args *args = (struct die_args *)data; int cpu = smp_processor_id(); struct mce *m = &__get_cpu_var(injectm); - if (val != DIE_NMI || !cpumask_test_cpu(cpu, mce_inject_cpumask)) - return NOTIFY_DONE; + if (!cpumask_test_cpu(cpu, mce_inject_cpumask)) + return NMI_DONE; cpumask_clear_cpu(cpu, mce_inject_cpumask); if (m->inject_flags & MCJ_EXCEPTION) - raise_exception(m, args->regs); + raise_exception(m, regs); else if (m->status) raise_poll(m); - return NOTIFY_STOP; + return NMI_HANDLED; } -static struct notifier_block mce_raise_nb = { - .notifier_call = mce_raise_notify, - .priority = NMI_LOCAL_NORMAL_PRIOR, -}; - /* Inject mce on current CPU */ static int raise_local(void) { @@ -216,7 +209,8 @@ static int inject_init(void) return -ENOMEM; printk(KERN_INFO "Machine check injector initialized\n"); mce_chrdev_ops.write = mce_write; - register_die_notifier(&mce_raise_nb); + register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0, + "mce_notify"); return 0; } diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 08363b042122..7b5063a6ad42 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -217,8 +217,13 @@ static void print_mce(struct mce *m) pr_cont("MISC %llx ", m->misc); pr_cont("\n"); - pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", - m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid); + /* + * Note this output is parsed by external tools and old fields + * should not be changed. + */ + pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x microcode %x\n", + m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid, + cpu_data(m->extcpu).microcode); /* * Print out human-readable details about the MCE error, @@ -908,9 +913,6 @@ void do_machine_check(struct pt_regs *regs, long error_code) percpu_inc(mce_exception_count); - if (notify_die(DIE_NMI, "machine check", regs, error_code, - 18, SIGKILL) == NOTIFY_STOP) - goto out; if (!banks) goto out; @@ -1140,6 +1142,15 @@ static void mce_start_timer(unsigned long data) add_timer_on(t, smp_processor_id()); } +/* Must not be called in IRQ context where del_timer_sync() can deadlock */ +static void mce_timer_delete_all(void) +{ + int cpu; + + for_each_online_cpu(cpu) + del_timer_sync(&per_cpu(mce_timer, cpu)); +} + static void mce_do_trigger(struct work_struct *work) { call_usermodehelper(mce_helper, mce_helper_argv, NULL, UMH_NO_WAIT); @@ -1750,7 +1761,6 @@ static struct syscore_ops mce_syscore_ops = { static void mce_cpu_restart(void *data) { - del_timer_sync(&__get_cpu_var(mce_timer)); if (!mce_available(__this_cpu_ptr(&cpu_info))) return; __mcheck_cpu_init_generic(); @@ -1760,16 +1770,15 @@ static void mce_cpu_restart(void *data) /* Reinit MCEs after user configuration changes */ static void mce_restart(void) { + mce_timer_delete_all(); on_each_cpu(mce_cpu_restart, NULL, 1); } /* Toggle features for corrected errors */ -static void mce_disable_ce(void *all) +static void mce_disable_cmci(void *data) { if (!mce_available(__this_cpu_ptr(&cpu_info))) return; - if (all) - del_timer_sync(&__get_cpu_var(mce_timer)); cmci_clear(); } @@ -1852,7 +1861,8 @@ static ssize_t set_ignore_ce(struct sys_device *s, if (mce_ignore_ce ^ !!new) { if (new) { /* disable ce features */ - on_each_cpu(mce_disable_ce, (void *)1, 1); + mce_timer_delete_all(); + on_each_cpu(mce_disable_cmci, NULL, 1); mce_ignore_ce = 1; } else { /* enable ce features */ @@ -1875,7 +1885,7 @@ static ssize_t set_cmci_disabled(struct sys_device *s, if (mce_cmci_disabled ^ !!new) { if (new) { /* disable cmci */ - on_each_cpu(mce_disable_ce, NULL, 1); + on_each_cpu(mce_disable_cmci, NULL, 1); mce_cmci_disabled = 1; } else { /* enable cmci */ diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 8694ef56459d..38e49bc95ffc 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -28,7 +28,7 @@ static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned); * cmci_discover_lock protects against parallel discovery attempts * which could race against each other. */ -static DEFINE_SPINLOCK(cmci_discover_lock); +static DEFINE_RAW_SPINLOCK(cmci_discover_lock); #define CMCI_THRESHOLD 1 @@ -85,7 +85,7 @@ static void cmci_discover(int banks, int boot) int hdr = 0; int i; - spin_lock_irqsave(&cmci_discover_lock, flags); + raw_spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { u64 val; @@ -116,7 +116,7 @@ static void cmci_discover(int banks, int boot) WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); } } - spin_unlock_irqrestore(&cmci_discover_lock, flags); + raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); if (hdr) printk(KERN_CONT "\n"); } @@ -150,7 +150,7 @@ void cmci_clear(void) if (!cmci_supported(&banks)) return; - spin_lock_irqsave(&cmci_discover_lock, flags); + raw_spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { if (!test_bit(i, __get_cpu_var(mce_banks_owned))) continue; @@ -160,7 +160,7 @@ void cmci_clear(void) wrmsrl(MSR_IA32_MCx_CTL2(i), val); __clear_bit(i, __get_cpu_var(mce_banks_owned)); } - spin_unlock_irqrestore(&cmci_discover_lock, flags); + raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); } /* diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index d944bf6c50e9..0a630dd4b620 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -11,6 +11,8 @@ */ #include <linux/types.h> +#include <linux/time.h> +#include <linux/clocksource.h> #include <linux/module.h> #include <asm/processor.h> #include <asm/hypervisor.h> @@ -36,6 +38,25 @@ static bool __init ms_hyperv_platform(void) !memcmp("Microsoft Hv", hyp_signature, 12); } +static cycle_t read_hv_clock(struct clocksource *arg) +{ + cycle_t current_tick; + /* + * Read the partition counter to get the current tick count. This count + * is set to 0 when the partition is created and is incremented in + * 100 nanosecond units. + */ + rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick); + return current_tick; +} + +static struct clocksource hyperv_cs = { + .name = "hyperv_clocksource", + .rating = 400, /* use this when running on Hyperv*/ + .read = read_hv_clock, + .mask = CLOCKSOURCE_MASK(64), +}; + static void __init ms_hyperv_init_platform(void) { /* @@ -46,6 +67,8 @@ static void __init ms_hyperv_init_platform(void) printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n", ms_hyperv.features, ms_hyperv.hints); + + clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100); } const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = { diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 08119a37e53c..6b96110bb0c3 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -149,7 +149,6 @@ struct set_mtrr_data { */ static int mtrr_rendezvous_handler(void *info) { -#ifdef CONFIG_SMP struct set_mtrr_data *data = info; /* @@ -171,7 +170,6 @@ static int mtrr_rendezvous_handler(void *info) } else if (mtrr_aps_delayed_init || !cpu_online(smp_processor_id())) { mtrr_if->set_all(); } -#endif return 0; } diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 4ee3abf20ed6..640891014b2a 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -32,6 +32,8 @@ #include <asm/smp.h> #include <asm/alternative.h> +#include "perf_event.h" + #if 0 #undef wrmsrl #define wrmsrl(msr, val) \ @@ -43,283 +45,17 @@ do { \ } while (0) #endif -/* - * | NHM/WSM | SNB | - * register ------------------------------- - * | HT | no HT | HT | no HT | - *----------------------------------------- - * offcore | core | core | cpu | core | - * lbr_sel | core | core | cpu | core | - * ld_lat | cpu | core | cpu | core | - *----------------------------------------- - * - * Given that there is a small number of shared regs, - * we can pre-allocate their slot in the per-cpu - * per-core reg tables. - */ -enum extra_reg_type { - EXTRA_REG_NONE = -1, /* not used */ - - EXTRA_REG_RSP_0 = 0, /* offcore_response_0 */ - EXTRA_REG_RSP_1 = 1, /* offcore_response_1 */ - - EXTRA_REG_MAX /* number of entries needed */ -}; - -struct event_constraint { - union { - unsigned long idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; - u64 idxmsk64; - }; - u64 code; - u64 cmask; - int weight; -}; - -struct amd_nb { - int nb_id; /* NorthBridge id */ - int refcnt; /* reference count */ - struct perf_event *owners[X86_PMC_IDX_MAX]; - struct event_constraint event_constraints[X86_PMC_IDX_MAX]; -}; - -struct intel_percore; - -#define MAX_LBR_ENTRIES 16 - -struct cpu_hw_events { - /* - * Generic x86 PMC bits - */ - struct perf_event *events[X86_PMC_IDX_MAX]; /* in counter order */ - unsigned long active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; - unsigned long running[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; - int enabled; - - int n_events; - int n_added; - int n_txn; - int assign[X86_PMC_IDX_MAX]; /* event to counter assignment */ - u64 tags[X86_PMC_IDX_MAX]; - struct perf_event *event_list[X86_PMC_IDX_MAX]; /* in enabled order */ - - unsigned int group_flag; - - /* - * Intel DebugStore bits - */ - struct debug_store *ds; - u64 pebs_enabled; - - /* - * Intel LBR bits - */ - int lbr_users; - void *lbr_context; - struct perf_branch_stack lbr_stack; - struct perf_branch_entry lbr_entries[MAX_LBR_ENTRIES]; - - /* - * manage shared (per-core, per-cpu) registers - * used on Intel NHM/WSM/SNB - */ - struct intel_shared_regs *shared_regs; - - /* - * AMD specific bits - */ - struct amd_nb *amd_nb; -}; - -#define __EVENT_CONSTRAINT(c, n, m, w) {\ - { .idxmsk64 = (n) }, \ - .code = (c), \ - .cmask = (m), \ - .weight = (w), \ -} - -#define EVENT_CONSTRAINT(c, n, m) \ - __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n)) - -/* - * Constraint on the Event code. - */ -#define INTEL_EVENT_CONSTRAINT(c, n) \ - EVENT_CONSTRAINT(c, n, ARCH_PERFMON_EVENTSEL_EVENT) - -/* - * Constraint on the Event code + UMask + fixed-mask - * - * filter mask to validate fixed counter events. - * the following filters disqualify for fixed counters: - * - inv - * - edge - * - cnt-mask - * The other filters are supported by fixed counters. - * The any-thread option is supported starting with v3. - */ -#define FIXED_EVENT_CONSTRAINT(c, n) \ - EVENT_CONSTRAINT(c, (1ULL << (32+n)), X86_RAW_EVENT_MASK) - -/* - * Constraint on the Event code + UMask - */ -#define INTEL_UEVENT_CONSTRAINT(c, n) \ - EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK) +struct x86_pmu x86_pmu __read_mostly; -#define EVENT_CONSTRAINT_END \ - EVENT_CONSTRAINT(0, 0, 0) - -#define for_each_event_constraint(e, c) \ - for ((e) = (c); (e)->weight; (e)++) - -/* - * Per register state. - */ -struct er_account { - raw_spinlock_t lock; /* per-core: protect structure */ - u64 config; /* extra MSR config */ - u64 reg; /* extra MSR number */ - atomic_t ref; /* reference count */ -}; - -/* - * Extra registers for specific events. - * - * Some events need large masks and require external MSRs. - * Those extra MSRs end up being shared for all events on - * a PMU and sometimes between PMU of sibling HT threads. - * In either case, the kernel needs to handle conflicting - * accesses to those extra, shared, regs. The data structure - * to manage those registers is stored in cpu_hw_event. - */ -struct extra_reg { - unsigned int event; - unsigned int msr; - u64 config_mask; - u64 valid_mask; - int idx; /* per_xxx->regs[] reg index */ -}; - -#define EVENT_EXTRA_REG(e, ms, m, vm, i) { \ - .event = (e), \ - .msr = (ms), \ - .config_mask = (m), \ - .valid_mask = (vm), \ - .idx = EXTRA_REG_##i \ - } - -#define INTEL_EVENT_EXTRA_REG(event, msr, vm, idx) \ - EVENT_EXTRA_REG(event, msr, ARCH_PERFMON_EVENTSEL_EVENT, vm, idx) - -#define EVENT_EXTRA_END EVENT_EXTRA_REG(0, 0, 0, 0, RSP_0) - -union perf_capabilities { - struct { - u64 lbr_format : 6; - u64 pebs_trap : 1; - u64 pebs_arch_reg : 1; - u64 pebs_format : 4; - u64 smm_freeze : 1; - }; - u64 capabilities; -}; - -/* - * struct x86_pmu - generic x86 pmu - */ -struct x86_pmu { - /* - * Generic x86 PMC bits - */ - const char *name; - int version; - int (*handle_irq)(struct pt_regs *); - void (*disable_all)(void); - void (*enable_all)(int added); - void (*enable)(struct perf_event *); - void (*disable)(struct perf_event *); - int (*hw_config)(struct perf_event *event); - int (*schedule_events)(struct cpu_hw_events *cpuc, int n, int *assign); - unsigned eventsel; - unsigned perfctr; - u64 (*event_map)(int); - int max_events; - int num_counters; - int num_counters_fixed; - int cntval_bits; - u64 cntval_mask; - int apic; - u64 max_period; - struct event_constraint * - (*get_event_constraints)(struct cpu_hw_events *cpuc, - struct perf_event *event); - - void (*put_event_constraints)(struct cpu_hw_events *cpuc, - struct perf_event *event); - struct event_constraint *event_constraints; - void (*quirks)(void); - int perfctr_second_write; - - int (*cpu_prepare)(int cpu); - void (*cpu_starting)(int cpu); - void (*cpu_dying)(int cpu); - void (*cpu_dead)(int cpu); - - /* - * Intel Arch Perfmon v2+ - */ - u64 intel_ctrl; - union perf_capabilities intel_cap; - - /* - * Intel DebugStore bits - */ - int bts, pebs; - int bts_active, pebs_active; - int pebs_record_size; - void (*drain_pebs)(struct pt_regs *regs); - struct event_constraint *pebs_constraints; - - /* - * Intel LBR - */ - unsigned long lbr_tos, lbr_from, lbr_to; /* MSR base regs */ - int lbr_nr; /* hardware stack size */ - - /* - * Extra registers for events - */ - struct extra_reg *extra_regs; - unsigned int er_flags; -}; - -#define ERF_NO_HT_SHARING 1 -#define ERF_HAS_RSP_1 2 - -static struct x86_pmu x86_pmu __read_mostly; - -static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, }; -static int x86_perf_event_set_period(struct perf_event *event); - -/* - * Generalized hw caching related hw_event table, filled - * in on a per model basis. A value of 0 means - * 'not supported', -1 means 'hw_event makes no sense on - * this CPU', any other value means the raw hw_event - * ID. - */ - -#define C(x) PERF_COUNT_HW_CACHE_##x - -static u64 __read_mostly hw_cache_event_ids +u64 __read_mostly hw_cache_event_ids [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX]; -static u64 __read_mostly hw_cache_extra_regs +u64 __read_mostly hw_cache_extra_regs [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX]; @@ -329,8 +65,7 @@ static u64 __read_mostly hw_cache_extra_regs * Can only be executed on the CPU where the event is active. * Returns the delta events processed. */ -static u64 -x86_perf_event_update(struct perf_event *event) +u64 x86_perf_event_update(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; int shift = 64 - x86_pmu.cntval_bits; @@ -373,30 +108,6 @@ again: return new_raw_count; } -static inline int x86_pmu_addr_offset(int index) -{ - int offset; - - /* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */ - alternative_io(ASM_NOP2, - "shll $1, %%eax", - X86_FEATURE_PERFCTR_CORE, - "=a" (offset), - "a" (index)); - - return offset; -} - -static inline unsigned int x86_pmu_config_addr(int index) -{ - return x86_pmu.eventsel + x86_pmu_addr_offset(index); -} - -static inline unsigned int x86_pmu_event_addr(int index) -{ - return x86_pmu.perfctr + x86_pmu_addr_offset(index); -} - /* * Find and validate any extra registers to set up. */ @@ -532,9 +243,6 @@ msr_fail: return false; } -static void reserve_ds_buffers(void); -static void release_ds_buffers(void); - static void hw_perf_event_destroy(struct perf_event *event) { if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) { @@ -583,7 +291,7 @@ set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event *event) return x86_pmu_extra_regs(val, event); } -static int x86_setup_perfctr(struct perf_event *event) +int x86_setup_perfctr(struct perf_event *event) { struct perf_event_attr *attr = &event->attr; struct hw_perf_event *hwc = &event->hw; @@ -647,7 +355,7 @@ static int x86_setup_perfctr(struct perf_event *event) return 0; } -static int x86_pmu_hw_config(struct perf_event *event) +int x86_pmu_hw_config(struct perf_event *event) { if (event->attr.precise_ip) { int precise = 0; @@ -723,7 +431,7 @@ static int __x86_pmu_event_init(struct perf_event *event) return x86_pmu.hw_config(event); } -static void x86_pmu_disable_all(void) +void x86_pmu_disable_all(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); int idx; @@ -758,15 +466,7 @@ static void x86_pmu_disable(struct pmu *pmu) x86_pmu.disable_all(); } -static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, - u64 enable_mask) -{ - if (hwc->extra_reg.reg) - wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config); - wrmsrl(hwc->config_base, hwc->config | enable_mask); -} - -static void x86_pmu_enable_all(int added) +void x86_pmu_enable_all(int added) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); int idx; @@ -788,7 +488,7 @@ static inline int is_x86_event(struct perf_event *event) return event->pmu == &pmu; } -static int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign) +int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign) { struct event_constraint *c, *constraints[X86_PMC_IDX_MAX]; unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; @@ -959,7 +659,6 @@ static inline int match_prev_assignment(struct hw_perf_event *hwc, } static void x86_pmu_start(struct perf_event *event, int flags); -static void x86_pmu_stop(struct perf_event *event, int flags); static void x86_pmu_enable(struct pmu *pmu) { @@ -1031,21 +730,13 @@ static void x86_pmu_enable(struct pmu *pmu) x86_pmu.enable_all(added); } -static inline void x86_pmu_disable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - - wrmsrl(hwc->config_base, hwc->config); -} - static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left); /* * Set the next IRQ period, based on the hwc->period_left value. * To be called with the event disabled in hw: */ -static int -x86_perf_event_set_period(struct perf_event *event) +int x86_perf_event_set_period(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; s64 left = local64_read(&hwc->period_left); @@ -1105,7 +796,7 @@ x86_perf_event_set_period(struct perf_event *event) return ret; } -static void x86_pmu_enable_event(struct perf_event *event) +void x86_pmu_enable_event(struct perf_event *event) { if (__this_cpu_read(cpu_hw_events.enabled)) __x86_pmu_enable_event(&event->hw, @@ -1244,7 +935,7 @@ void perf_event_print_debug(void) local_irq_restore(flags); } -static void x86_pmu_stop(struct perf_event *event, int flags) +void x86_pmu_stop(struct perf_event *event, int flags) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; @@ -1297,7 +988,7 @@ static void x86_pmu_del(struct perf_event *event, int flags) perf_event_update_userpage(event); } -static int x86_pmu_handle_irq(struct pt_regs *regs) +int x86_pmu_handle_irq(struct pt_regs *regs) { struct perf_sample_data data; struct cpu_hw_events *cpuc; @@ -1367,109 +1058,28 @@ void perf_events_lapic_init(void) apic_write(APIC_LVTPC, APIC_DM_NMI); } -struct pmu_nmi_state { - unsigned int marked; - int handled; -}; - -static DEFINE_PER_CPU(struct pmu_nmi_state, pmu_nmi); - static int __kprobes -perf_event_nmi_handler(struct notifier_block *self, - unsigned long cmd, void *__args) +perf_event_nmi_handler(unsigned int cmd, struct pt_regs *regs) { - struct die_args *args = __args; - unsigned int this_nmi; - int handled; - if (!atomic_read(&active_events)) - return NOTIFY_DONE; - - switch (cmd) { - case DIE_NMI: - break; - case DIE_NMIUNKNOWN: - this_nmi = percpu_read(irq_stat.__nmi_count); - if (this_nmi != __this_cpu_read(pmu_nmi.marked)) - /* let the kernel handle the unknown nmi */ - return NOTIFY_DONE; - /* - * This one is a PMU back-to-back nmi. Two events - * trigger 'simultaneously' raising two back-to-back - * NMIs. If the first NMI handles both, the latter - * will be empty and daze the CPU. So, we drop it to - * avoid false-positive 'unknown nmi' messages. - */ - return NOTIFY_STOP; - default: - return NOTIFY_DONE; - } - - handled = x86_pmu.handle_irq(args->regs); - if (!handled) - return NOTIFY_DONE; - - this_nmi = percpu_read(irq_stat.__nmi_count); - if ((handled > 1) || - /* the next nmi could be a back-to-back nmi */ - ((__this_cpu_read(pmu_nmi.marked) == this_nmi) && - (__this_cpu_read(pmu_nmi.handled) > 1))) { - /* - * We could have two subsequent back-to-back nmis: The - * first handles more than one counter, the 2nd - * handles only one counter and the 3rd handles no - * counter. - * - * This is the 2nd nmi because the previous was - * handling more than one counter. We will mark the - * next (3rd) and then drop it if unhandled. - */ - __this_cpu_write(pmu_nmi.marked, this_nmi + 1); - __this_cpu_write(pmu_nmi.handled, handled); - } + return NMI_DONE; - return NOTIFY_STOP; + return x86_pmu.handle_irq(regs); } -static __read_mostly struct notifier_block perf_event_nmi_notifier = { - .notifier_call = perf_event_nmi_handler, - .next = NULL, - .priority = NMI_LOCAL_LOW_PRIOR, -}; - -static struct event_constraint unconstrained; -static struct event_constraint emptyconstraint; - -static struct event_constraint * -x86_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) -{ - struct event_constraint *c; - - if (x86_pmu.event_constraints) { - for_each_event_constraint(c, x86_pmu.event_constraints) { - if ((event->hw.config & c->cmask) == c->code) - return c; - } - } - - return &unconstrained; -} - -#include "perf_event_amd.c" -#include "perf_event_p6.c" -#include "perf_event_p4.c" -#include "perf_event_intel_lbr.c" -#include "perf_event_intel_ds.c" -#include "perf_event_intel.c" +struct event_constraint emptyconstraint; +struct event_constraint unconstrained; static int __cpuinit x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (long)hcpu; + struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu); int ret = NOTIFY_OK; switch (action & ~CPU_TASKS_FROZEN) { case CPU_UP_PREPARE: + cpuc->kfree_on_online = NULL; if (x86_pmu.cpu_prepare) ret = x86_pmu.cpu_prepare(cpu); break; @@ -1479,6 +1089,10 @@ x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu) x86_pmu.cpu_starting(cpu); break; + case CPU_ONLINE: + kfree(cpuc->kfree_on_online); + break; + case CPU_DYING: if (x86_pmu.cpu_dying) x86_pmu.cpu_dying(cpu); @@ -1557,7 +1171,7 @@ static int __init init_hw_perf_events(void) ((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED; perf_events_lapic_init(); - register_die_notifier(&perf_event_nmi_notifier); + register_nmi_handler(NMI_LOCAL, perf_event_nmi_handler, 0, "PMI"); unconstrained = (struct event_constraint) __EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1, @@ -1900,6 +1514,9 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) perf_callchain_store(entry, regs->ip); + if (!current->mm) + return; + if (perf_callchain_user32(regs, entry)) return; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h new file mode 100644 index 000000000000..b9698d40ac4b --- /dev/null +++ b/arch/x86/kernel/cpu/perf_event.h @@ -0,0 +1,505 @@ +/* + * Performance events x86 architecture header + * + * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de> + * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar + * Copyright (C) 2009 Jaswinder Singh Rajput + * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter + * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com> + * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com> + * Copyright (C) 2009 Google, Inc., Stephane Eranian + * + * For licencing details see kernel-base/COPYING + */ + +#include <linux/perf_event.h> + +/* + * | NHM/WSM | SNB | + * register ------------------------------- + * | HT | no HT | HT | no HT | + *----------------------------------------- + * offcore | core | core | cpu | core | + * lbr_sel | core | core | cpu | core | + * ld_lat | cpu | core | cpu | core | + *----------------------------------------- + * + * Given that there is a small number of shared regs, + * we can pre-allocate their slot in the per-cpu + * per-core reg tables. + */ +enum extra_reg_type { + EXTRA_REG_NONE = -1, /* not used */ + + EXTRA_REG_RSP_0 = 0, /* offcore_response_0 */ + EXTRA_REG_RSP_1 = 1, /* offcore_response_1 */ + + EXTRA_REG_MAX /* number of entries needed */ +}; + +struct event_constraint { + union { + unsigned long idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; + u64 idxmsk64; + }; + u64 code; + u64 cmask; + int weight; +}; + +struct amd_nb { + int nb_id; /* NorthBridge id */ + int refcnt; /* reference count */ + struct perf_event *owners[X86_PMC_IDX_MAX]; + struct event_constraint event_constraints[X86_PMC_IDX_MAX]; +}; + +/* The maximal number of PEBS events: */ +#define MAX_PEBS_EVENTS 4 + +/* + * A debug store configuration. + * + * We only support architectures that use 64bit fields. + */ +struct debug_store { + u64 bts_buffer_base; + u64 bts_index; + u64 bts_absolute_maximum; + u64 bts_interrupt_threshold; + u64 pebs_buffer_base; + u64 pebs_index; + u64 pebs_absolute_maximum; + u64 pebs_interrupt_threshold; + u64 pebs_event_reset[MAX_PEBS_EVENTS]; +}; + +/* + * Per register state. + */ +struct er_account { + raw_spinlock_t lock; /* per-core: protect structure */ + u64 config; /* extra MSR config */ + u64 reg; /* extra MSR number */ + atomic_t ref; /* reference count */ +}; + +/* + * Per core/cpu state + * + * Used to coordinate shared registers between HT threads or + * among events on a single PMU. + */ +struct intel_shared_regs { + struct er_account regs[EXTRA_REG_MAX]; + int refcnt; /* per-core: #HT threads */ + unsigned core_id; /* per-core: core id */ +}; + +#define MAX_LBR_ENTRIES 16 + +struct cpu_hw_events { + /* + * Generic x86 PMC bits + */ + struct perf_event *events[X86_PMC_IDX_MAX]; /* in counter order */ + unsigned long active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; + unsigned long running[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; + int enabled; + + int n_events; + int n_added; + int n_txn; + int assign[X86_PMC_IDX_MAX]; /* event to counter assignment */ + u64 tags[X86_PMC_IDX_MAX]; + struct perf_event *event_list[X86_PMC_IDX_MAX]; /* in enabled order */ + + unsigned int group_flag; + + /* + * Intel DebugStore bits + */ + struct debug_store *ds; + u64 pebs_enabled; + + /* + * Intel LBR bits + */ + int lbr_users; + void *lbr_context; + struct perf_branch_stack lbr_stack; + struct perf_branch_entry lbr_entries[MAX_LBR_ENTRIES]; + + /* + * Intel host/guest exclude bits + */ + u64 intel_ctrl_guest_mask; + u64 intel_ctrl_host_mask; + struct perf_guest_switch_msr guest_switch_msrs[X86_PMC_IDX_MAX]; + + /* + * manage shared (per-core, per-cpu) registers + * used on Intel NHM/WSM/SNB + */ + struct intel_shared_regs *shared_regs; + + /* + * AMD specific bits + */ + struct amd_nb *amd_nb; + + void *kfree_on_online; +}; + +#define __EVENT_CONSTRAINT(c, n, m, w) {\ + { .idxmsk64 = (n) }, \ + .code = (c), \ + .cmask = (m), \ + .weight = (w), \ +} + +#define EVENT_CONSTRAINT(c, n, m) \ + __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n)) + +/* + * Constraint on the Event code. + */ +#define INTEL_EVENT_CONSTRAINT(c, n) \ + EVENT_CONSTRAINT(c, n, ARCH_PERFMON_EVENTSEL_EVENT) + +/* + * Constraint on the Event code + UMask + fixed-mask + * + * filter mask to validate fixed counter events. + * the following filters disqualify for fixed counters: + * - inv + * - edge + * - cnt-mask + * The other filters are supported by fixed counters. + * The any-thread option is supported starting with v3. + */ +#define FIXED_EVENT_CONSTRAINT(c, n) \ + EVENT_CONSTRAINT(c, (1ULL << (32+n)), X86_RAW_EVENT_MASK) + +/* + * Constraint on the Event code + UMask + */ +#define INTEL_UEVENT_CONSTRAINT(c, n) \ + EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK) + +#define EVENT_CONSTRAINT_END \ + EVENT_CONSTRAINT(0, 0, 0) + +#define for_each_event_constraint(e, c) \ + for ((e) = (c); (e)->weight; (e)++) + +/* + * Extra registers for specific events. + * + * Some events need large masks and require external MSRs. + * Those extra MSRs end up being shared for all events on + * a PMU and sometimes between PMU of sibling HT threads. + * In either case, the kernel needs to handle conflicting + * accesses to those extra, shared, regs. The data structure + * to manage those registers is stored in cpu_hw_event. + */ +struct extra_reg { + unsigned int event; + unsigned int msr; + u64 config_mask; + u64 valid_mask; + int idx; /* per_xxx->regs[] reg index */ +}; + +#define EVENT_EXTRA_REG(e, ms, m, vm, i) { \ + .event = (e), \ + .msr = (ms), \ + .config_mask = (m), \ + .valid_mask = (vm), \ + .idx = EXTRA_REG_##i \ + } + +#define INTEL_EVENT_EXTRA_REG(event, msr, vm, idx) \ + EVENT_EXTRA_REG(event, msr, ARCH_PERFMON_EVENTSEL_EVENT, vm, idx) + +#define EVENT_EXTRA_END EVENT_EXTRA_REG(0, 0, 0, 0, RSP_0) + +union perf_capabilities { + struct { + u64 lbr_format:6; + u64 pebs_trap:1; + u64 pebs_arch_reg:1; + u64 pebs_format:4; + u64 smm_freeze:1; + }; + u64 capabilities; +}; + +/* + * struct x86_pmu - generic x86 pmu + */ +struct x86_pmu { + /* + * Generic x86 PMC bits + */ + const char *name; + int version; + int (*handle_irq)(struct pt_regs *); + void (*disable_all)(void); + void (*enable_all)(int added); + void (*enable)(struct perf_event *); + void (*disable)(struct perf_event *); + int (*hw_config)(struct perf_event *event); + int (*schedule_events)(struct cpu_hw_events *cpuc, int n, int *assign); + unsigned eventsel; + unsigned perfctr; + u64 (*event_map)(int); + int max_events; + int num_counters; + int num_counters_fixed; + int cntval_bits; + u64 cntval_mask; + int apic; + u64 max_period; + struct event_constraint * + (*get_event_constraints)(struct cpu_hw_events *cpuc, + struct perf_event *event); + + void (*put_event_constraints)(struct cpu_hw_events *cpuc, + struct perf_event *event); + struct event_constraint *event_constraints; + void (*quirks)(void); + int perfctr_second_write; + + int (*cpu_prepare)(int cpu); + void (*cpu_starting)(int cpu); + void (*cpu_dying)(int cpu); + void (*cpu_dead)(int cpu); + + /* + * Intel Arch Perfmon v2+ + */ + u64 intel_ctrl; + union perf_capabilities intel_cap; + + /* + * Intel DebugStore bits + */ + int bts, pebs; + int bts_active, pebs_active; + int pebs_record_size; + void (*drain_pebs)(struct pt_regs *regs); + struct event_constraint *pebs_constraints; + + /* + * Intel LBR + */ + unsigned long lbr_tos, lbr_from, lbr_to; /* MSR base regs */ + int lbr_nr; /* hardware stack size */ + + /* + * Extra registers for events + */ + struct extra_reg *extra_regs; + unsigned int er_flags; + + /* + * Intel host/guest support (KVM) + */ + struct perf_guest_switch_msr *(*guest_get_msrs)(int *nr); +}; + +#define ERF_NO_HT_SHARING 1 +#define ERF_HAS_RSP_1 2 + +extern struct x86_pmu x86_pmu __read_mostly; + +DECLARE_PER_CPU(struct cpu_hw_events, cpu_hw_events); + +int x86_perf_event_set_period(struct perf_event *event); + +/* + * Generalized hw caching related hw_event table, filled + * in on a per model basis. A value of 0 means + * 'not supported', -1 means 'hw_event makes no sense on + * this CPU', any other value means the raw hw_event + * ID. + */ + +#define C(x) PERF_COUNT_HW_CACHE_##x + +extern u64 __read_mostly hw_cache_event_ids + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +extern u64 __read_mostly hw_cache_extra_regs + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + +u64 x86_perf_event_update(struct perf_event *event); + +static inline int x86_pmu_addr_offset(int index) +{ + int offset; + + /* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */ + alternative_io(ASM_NOP2, + "shll $1, %%eax", + X86_FEATURE_PERFCTR_CORE, + "=a" (offset), + "a" (index)); + + return offset; +} + +static inline unsigned int x86_pmu_config_addr(int index) +{ + return x86_pmu.eventsel + x86_pmu_addr_offset(index); +} + +static inline unsigned int x86_pmu_event_addr(int index) +{ + return x86_pmu.perfctr + x86_pmu_addr_offset(index); +} + +int x86_setup_perfctr(struct perf_event *event); + +int x86_pmu_hw_config(struct perf_event *event); + +void x86_pmu_disable_all(void); + +static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, + u64 enable_mask) +{ + if (hwc->extra_reg.reg) + wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config); + wrmsrl(hwc->config_base, hwc->config | enable_mask); +} + +void x86_pmu_enable_all(int added); + +int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign); + +void x86_pmu_stop(struct perf_event *event, int flags); + +static inline void x86_pmu_disable_event(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + wrmsrl(hwc->config_base, hwc->config); +} + +void x86_pmu_enable_event(struct perf_event *event); + +int x86_pmu_handle_irq(struct pt_regs *regs); + +extern struct event_constraint emptyconstraint; + +extern struct event_constraint unconstrained; + +#ifdef CONFIG_CPU_SUP_AMD + +int amd_pmu_init(void); + +#else /* CONFIG_CPU_SUP_AMD */ + +static inline int amd_pmu_init(void) +{ + return 0; +} + +#endif /* CONFIG_CPU_SUP_AMD */ + +#ifdef CONFIG_CPU_SUP_INTEL + +int intel_pmu_save_and_restart(struct perf_event *event); + +struct event_constraint * +x86_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event); + +struct intel_shared_regs *allocate_shared_regs(int cpu); + +int intel_pmu_init(void); + +void init_debug_store_on_cpu(int cpu); + +void fini_debug_store_on_cpu(int cpu); + +void release_ds_buffers(void); + +void reserve_ds_buffers(void); + +extern struct event_constraint bts_constraint; + +void intel_pmu_enable_bts(u64 config); + +void intel_pmu_disable_bts(void); + +int intel_pmu_drain_bts_buffer(void); + +extern struct event_constraint intel_core2_pebs_event_constraints[]; + +extern struct event_constraint intel_atom_pebs_event_constraints[]; + +extern struct event_constraint intel_nehalem_pebs_event_constraints[]; + +extern struct event_constraint intel_westmere_pebs_event_constraints[]; + +extern struct event_constraint intel_snb_pebs_event_constraints[]; + +struct event_constraint *intel_pebs_constraints(struct perf_event *event); + +void intel_pmu_pebs_enable(struct perf_event *event); + +void intel_pmu_pebs_disable(struct perf_event *event); + +void intel_pmu_pebs_enable_all(void); + +void intel_pmu_pebs_disable_all(void); + +void intel_ds_init(void); + +void intel_pmu_lbr_reset(void); + +void intel_pmu_lbr_enable(struct perf_event *event); + +void intel_pmu_lbr_disable(struct perf_event *event); + +void intel_pmu_lbr_enable_all(void); + +void intel_pmu_lbr_disable_all(void); + +void intel_pmu_lbr_read(void); + +void intel_pmu_lbr_init_core(void); + +void intel_pmu_lbr_init_nhm(void); + +void intel_pmu_lbr_init_atom(void); + +int p4_pmu_init(void); + +int p6_pmu_init(void); + +#else /* CONFIG_CPU_SUP_INTEL */ + +static inline void reserve_ds_buffers(void) +{ +} + +static inline void release_ds_buffers(void) +{ +} + +static inline int intel_pmu_init(void) +{ + return 0; +} + +static inline struct intel_shared_regs *allocate_shared_regs(int cpu) +{ + return NULL; +} + +#endif /* CONFIG_CPU_SUP_INTEL */ diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 941caa2e449b..aeefd45697a2 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -1,4 +1,10 @@ -#ifdef CONFIG_CPU_SUP_AMD +#include <linux/perf_event.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <asm/apicdef.h> + +#include "perf_event.h" static __initconst const u64 amd_hw_cache_event_ids [PERF_COUNT_HW_CACHE_MAX] @@ -132,6 +138,19 @@ static int amd_pmu_hw_config(struct perf_event *event) if (ret) return ret; + if (event->attr.exclude_host && event->attr.exclude_guest) + /* + * When HO == GO == 1 the hardware treats that as GO == HO == 0 + * and will count in both modes. We don't want to count in that + * case so we emulate no-counting by setting US = OS = 0. + */ + event->hw.config &= ~(ARCH_PERFMON_EVENTSEL_USR | + ARCH_PERFMON_EVENTSEL_OS); + else if (event->attr.exclude_host) + event->hw.config |= AMD_PERFMON_EVENTSEL_GUESTONLY; + else if (event->attr.exclude_guest) + event->hw.config |= AMD_PERFMON_EVENTSEL_HOSTONLY; + if (event->attr.type != PERF_TYPE_RAW) return 0; @@ -350,7 +369,7 @@ static void amd_pmu_cpu_starting(int cpu) continue; if (nb->nb_id == nb_id) { - kfree(cpuc->amd_nb); + cpuc->kfree_on_online = cpuc->amd_nb; cpuc->amd_nb = nb; break; } @@ -392,7 +411,7 @@ static __initconst const struct x86_pmu amd_pmu = { .perfctr = MSR_K7_PERFCTR0, .event_map = amd_pmu_event_map, .max_events = ARRAY_SIZE(amd_perfmon_event_map), - .num_counters = 4, + .num_counters = AMD64_NUM_COUNTERS, .cntval_bits = 48, .cntval_mask = (1ULL << 48) - 1, .apic = 1, @@ -556,7 +575,7 @@ static __initconst const struct x86_pmu amd_pmu_f15h = { .perfctr = MSR_F15H_PERF_CTR, .event_map = amd_pmu_event_map, .max_events = ARRAY_SIZE(amd_perfmon_event_map), - .num_counters = 6, + .num_counters = AMD64_NUM_COUNTERS_F15H, .cntval_bits = 48, .cntval_mask = (1ULL << 48) - 1, .apic = 1, @@ -573,7 +592,7 @@ static __initconst const struct x86_pmu amd_pmu_f15h = { #endif }; -static __init int amd_pmu_init(void) +__init int amd_pmu_init(void) { /* Performance-monitoring supported from K7 and later: */ if (boot_cpu_data.x86 < 6) @@ -602,12 +621,3 @@ static __init int amd_pmu_init(void) return 0; } - -#else /* CONFIG_CPU_SUP_AMD */ - -static int amd_pmu_init(void) -{ - return 0; -} - -#endif diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c new file mode 100644 index 000000000000..ab6343d21825 --- /dev/null +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -0,0 +1,294 @@ +/* + * Performance events - AMD IBS + * + * Copyright (C) 2011 Advanced Micro Devices, Inc., Robert Richter + * + * For licencing details see kernel-base/COPYING + */ + +#include <linux/perf_event.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include <asm/apic.h> + +static u32 ibs_caps; + +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) + +static struct pmu perf_ibs; + +static int perf_ibs_init(struct perf_event *event) +{ + if (perf_ibs.type != event->attr.type) + return -ENOENT; + return 0; +} + +static int perf_ibs_add(struct perf_event *event, int flags) +{ + return 0; +} + +static void perf_ibs_del(struct perf_event *event, int flags) +{ +} + +static struct pmu perf_ibs = { + .event_init= perf_ibs_init, + .add= perf_ibs_add, + .del= perf_ibs_del, +}; + +static __init int perf_event_ibs_init(void) +{ + if (!ibs_caps) + return -ENODEV; /* ibs not supported by the cpu */ + + perf_pmu_register(&perf_ibs, "ibs", -1); + printk(KERN_INFO "perf: AMD IBS detected (0x%08x)\n", ibs_caps); + + return 0; +} + +#else /* defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) */ + +static __init int perf_event_ibs_init(void) { return 0; } + +#endif + +/* IBS - apic initialization, for perf and oprofile */ + +static __init u32 __get_ibs_caps(void) +{ + u32 caps; + unsigned int max_level; + + if (!boot_cpu_has(X86_FEATURE_IBS)) + return 0; + + /* check IBS cpuid feature flags */ + max_level = cpuid_eax(0x80000000); + if (max_level < IBS_CPUID_FEATURES) + return IBS_CAPS_DEFAULT; + + caps = cpuid_eax(IBS_CPUID_FEATURES); + if (!(caps & IBS_CAPS_AVAIL)) + /* cpuid flags not valid */ + return IBS_CAPS_DEFAULT; + + return caps; +} + +u32 get_ibs_caps(void) +{ + return ibs_caps; +} + +EXPORT_SYMBOL(get_ibs_caps); + +static inline int get_eilvt(int offset) +{ + return !setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_NMI, 1); +} + +static inline int put_eilvt(int offset) +{ + return !setup_APIC_eilvt(offset, 0, 0, 1); +} + +/* + * Check and reserve APIC extended interrupt LVT offset for IBS if available. + */ +static inline int ibs_eilvt_valid(void) +{ + int offset; + u64 val; + int valid = 0; + + preempt_disable(); + + rdmsrl(MSR_AMD64_IBSCTL, val); + offset = val & IBSCTL_LVT_OFFSET_MASK; + + if (!(val & IBSCTL_LVT_OFFSET_VALID)) { + pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", + smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); + goto out; + } + + if (!get_eilvt(offset)) { + pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", + smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); + goto out; + } + + valid = 1; +out: + preempt_enable(); + + return valid; +} + +static int setup_ibs_ctl(int ibs_eilvt_off) +{ + struct pci_dev *cpu_cfg; + int nodes; + u32 value = 0; + + nodes = 0; + cpu_cfg = NULL; + do { + cpu_cfg = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_10H_NB_MISC, + cpu_cfg); + if (!cpu_cfg) + break; + ++nodes; + pci_write_config_dword(cpu_cfg, IBSCTL, ibs_eilvt_off + | IBSCTL_LVT_OFFSET_VALID); + pci_read_config_dword(cpu_cfg, IBSCTL, &value); + if (value != (ibs_eilvt_off | IBSCTL_LVT_OFFSET_VALID)) { + pci_dev_put(cpu_cfg); + printk(KERN_DEBUG "Failed to setup IBS LVT offset, " + "IBSCTL = 0x%08x\n", value); + return -EINVAL; + } + } while (1); + + if (!nodes) { + printk(KERN_DEBUG "No CPU node configured for IBS\n"); + return -ENODEV; + } + + return 0; +} + +/* + * This runs only on the current cpu. We try to find an LVT offset and + * setup the local APIC. For this we must disable preemption. On + * success we initialize all nodes with this offset. This updates then + * the offset in the IBS_CTL per-node msr. The per-core APIC setup of + * the IBS interrupt vector is handled by perf_ibs_cpu_notifier that + * is using the new offset. + */ +static int force_ibs_eilvt_setup(void) +{ + int offset; + int ret; + + preempt_disable(); + /* find the next free available EILVT entry, skip offset 0 */ + for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) { + if (get_eilvt(offset)) + break; + } + preempt_enable(); + + if (offset == APIC_EILVT_NR_MAX) { + printk(KERN_DEBUG "No EILVT entry available\n"); + return -EBUSY; + } + + ret = setup_ibs_ctl(offset); + if (ret) + goto out; + + if (!ibs_eilvt_valid()) { + ret = -EFAULT; + goto out; + } + + pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); + pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); + + return 0; +out: + preempt_disable(); + put_eilvt(offset); + preempt_enable(); + return ret; +} + +static inline int get_ibs_lvt_offset(void) +{ + u64 val; + + rdmsrl(MSR_AMD64_IBSCTL, val); + if (!(val & IBSCTL_LVT_OFFSET_VALID)) + return -EINVAL; + + return val & IBSCTL_LVT_OFFSET_MASK; +} + +static void setup_APIC_ibs(void *dummy) +{ + int offset; + + offset = get_ibs_lvt_offset(); + if (offset < 0) + goto failed; + + if (!setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_NMI, 0)) + return; +failed: + pr_warn("perf: IBS APIC setup failed on cpu #%d\n", + smp_processor_id()); +} + +static void clear_APIC_ibs(void *dummy) +{ + int offset; + + offset = get_ibs_lvt_offset(); + if (offset >= 0) + setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_FIX, 1); +} + +static int __cpuinit +perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + setup_APIC_ibs(NULL); + break; + case CPU_DYING: + clear_APIC_ibs(NULL); + break; + default: + break; + } + + return NOTIFY_OK; +} + +static __init int amd_ibs_init(void) +{ + u32 caps; + int ret; + + caps = __get_ibs_caps(); + if (!caps) + return -ENODEV; /* ibs not supported by the cpu */ + + if (!ibs_eilvt_valid()) { + ret = force_ibs_eilvt_setup(); + if (ret) { + pr_err("Failed to setup IBS, %d\n", ret); + return ret; + } + } + + get_online_cpus(); + ibs_caps = caps; + /* make ibs_caps visible to other cpus: */ + smp_mb(); + perf_cpu_notifier(perf_ibs_cpu_notifier); + smp_call_function(setup_APIC_ibs, NULL, 1); + put_online_cpus(); + + return perf_event_ibs_init(); +} + +/* Since we need the pci subsystem to init ibs we can't do this earlier: */ +device_initcall(amd_ibs_init); diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index f88af2c2a561..e09ca20e86ee 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1,16 +1,19 @@ -#ifdef CONFIG_CPU_SUP_INTEL - /* * Per core/cpu state * * Used to coordinate shared registers between HT threads or * among events on a single PMU. */ -struct intel_shared_regs { - struct er_account regs[EXTRA_REG_MAX]; - int refcnt; /* per-core: #HT threads */ - unsigned core_id; /* per-core: core id */ -}; + +#include <linux/stddef.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include <asm/hardirq.h> +#include <asm/apic.h> + +#include "perf_event.h" /* * Intel PerfMon, used on Core and later. @@ -746,7 +749,8 @@ static void intel_pmu_enable_all(int added) intel_pmu_pebs_enable_all(); intel_pmu_lbr_enable_all(); - wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl); + wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, + x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask); if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) { struct perf_event *event = @@ -869,6 +873,7 @@ static void intel_pmu_disable_fixed(struct hw_perf_event *hwc) static void intel_pmu_disable_event(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) { intel_pmu_disable_bts(); @@ -876,6 +881,9 @@ static void intel_pmu_disable_event(struct perf_event *event) return; } + cpuc->intel_ctrl_guest_mask &= ~(1ull << hwc->idx); + cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx); + if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) { intel_pmu_disable_fixed(hwc); return; @@ -921,6 +929,7 @@ static void intel_pmu_enable_fixed(struct hw_perf_event *hwc) static void intel_pmu_enable_event(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) { if (!__this_cpu_read(cpu_hw_events.enabled)) @@ -930,6 +939,11 @@ static void intel_pmu_enable_event(struct perf_event *event) return; } + if (event->attr.exclude_host) + cpuc->intel_ctrl_guest_mask |= (1ull << hwc->idx); + if (event->attr.exclude_guest) + cpuc->intel_ctrl_host_mask |= (1ull << hwc->idx); + if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) { intel_pmu_enable_fixed(hwc); return; @@ -945,7 +959,7 @@ static void intel_pmu_enable_event(struct perf_event *event) * Save and restart an expired event. Called by NMI contexts, * so it has to be careful about preempting normal event ops: */ -static int intel_pmu_save_and_restart(struct perf_event *event) +int intel_pmu_save_and_restart(struct perf_event *event) { x86_perf_event_update(event); return x86_perf_event_set_period(event); @@ -1197,6 +1211,21 @@ intel_shared_regs_constraints(struct cpu_hw_events *cpuc, return c; } +struct event_constraint * +x86_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) +{ + struct event_constraint *c; + + if (x86_pmu.event_constraints) { + for_each_event_constraint(c, x86_pmu.event_constraints) { + if ((event->hw.config & c->cmask) == c->code) + return c; + } + } + + return &unconstrained; +} + static struct event_constraint * intel_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) { @@ -1284,12 +1313,84 @@ static int intel_pmu_hw_config(struct perf_event *event) return 0; } +struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr) +{ + if (x86_pmu.guest_get_msrs) + return x86_pmu.guest_get_msrs(nr); + *nr = 0; + return NULL; +} +EXPORT_SYMBOL_GPL(perf_guest_get_msrs); + +static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct perf_guest_switch_msr *arr = cpuc->guest_switch_msrs; + + arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; + arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; + arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + + *nr = 1; + return arr; +} + +static struct perf_guest_switch_msr *core_guest_get_msrs(int *nr) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct perf_guest_switch_msr *arr = cpuc->guest_switch_msrs; + int idx; + + for (idx = 0; idx < x86_pmu.num_counters; idx++) { + struct perf_event *event = cpuc->events[idx]; + + arr[idx].msr = x86_pmu_config_addr(idx); + arr[idx].host = arr[idx].guest = 0; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + arr[idx].host = arr[idx].guest = + event->hw.config | ARCH_PERFMON_EVENTSEL_ENABLE; + + if (event->attr.exclude_host) + arr[idx].host &= ~ARCH_PERFMON_EVENTSEL_ENABLE; + else if (event->attr.exclude_guest) + arr[idx].guest &= ~ARCH_PERFMON_EVENTSEL_ENABLE; + } + + *nr = x86_pmu.num_counters; + return arr; +} + +static void core_pmu_enable_event(struct perf_event *event) +{ + if (!event->attr.exclude_host) + x86_pmu_enable_event(event); +} + +static void core_pmu_enable_all(int added) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + int idx; + + for (idx = 0; idx < x86_pmu.num_counters; idx++) { + struct hw_perf_event *hwc = &cpuc->events[idx]->hw; + + if (!test_bit(idx, cpuc->active_mask) || + cpuc->events[idx]->attr.exclude_host) + continue; + + __x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE); + } +} + static __initconst const struct x86_pmu core_pmu = { .name = "core", .handle_irq = x86_pmu_handle_irq, .disable_all = x86_pmu_disable_all, - .enable_all = x86_pmu_enable_all, - .enable = x86_pmu_enable_event, + .enable_all = core_pmu_enable_all, + .enable = core_pmu_enable_event, .disable = x86_pmu_disable_event, .hw_config = x86_pmu_hw_config, .schedule_events = x86_schedule_events, @@ -1307,9 +1408,10 @@ static __initconst const struct x86_pmu core_pmu = { .get_event_constraints = intel_get_event_constraints, .put_event_constraints = intel_put_event_constraints, .event_constraints = intel_core_event_constraints, + .guest_get_msrs = core_guest_get_msrs, }; -static struct intel_shared_regs *allocate_shared_regs(int cpu) +struct intel_shared_regs *allocate_shared_regs(int cpu) { struct intel_shared_regs *regs; int i; @@ -1362,7 +1464,7 @@ static void intel_pmu_cpu_starting(int cpu) pc = per_cpu(cpu_hw_events, i).shared_regs; if (pc && pc->core_id == core_id) { - kfree(cpuc->shared_regs); + cpuc->kfree_on_online = cpuc->shared_regs; cpuc->shared_regs = pc; break; } @@ -1413,6 +1515,7 @@ static __initconst const struct x86_pmu intel_pmu = { .cpu_prepare = intel_pmu_cpu_prepare, .cpu_starting = intel_pmu_cpu_starting, .cpu_dying = intel_pmu_cpu_dying, + .guest_get_msrs = intel_guest_get_msrs, }; static void intel_clovertown_quirks(void) @@ -1441,7 +1544,7 @@ static void intel_clovertown_quirks(void) x86_pmu.pebs_constraints = NULL; } -static __init int intel_pmu_init(void) +__init int intel_pmu_init(void) { union cpuid10_edx edx; union cpuid10_eax eax; @@ -1597,7 +1700,7 @@ static __init int intel_pmu_init(void) intel_pmu_lbr_init_nhm(); x86_pmu.event_constraints = intel_snb_event_constraints; - x86_pmu.pebs_constraints = intel_snb_pebs_events; + x86_pmu.pebs_constraints = intel_snb_pebs_event_constraints; x86_pmu.extra_regs = intel_snb_extra_regs; /* all extra regs are per-cpu when HT is on */ x86_pmu.er_flags |= ERF_HAS_RSP_1; @@ -1628,16 +1731,3 @@ static __init int intel_pmu_init(void) } return 0; } - -#else /* CONFIG_CPU_SUP_INTEL */ - -static int intel_pmu_init(void) -{ - return 0; -} - -static struct intel_shared_regs *allocate_shared_regs(int cpu) -{ - return NULL; -} -#endif /* CONFIG_CPU_SUP_INTEL */ diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 1b1ef3addcfd..c0d238f49db8 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -1,7 +1,10 @@ -#ifdef CONFIG_CPU_SUP_INTEL +#include <linux/bitops.h> +#include <linux/types.h> +#include <linux/slab.h> -/* The maximal number of PEBS events: */ -#define MAX_PEBS_EVENTS 4 +#include <asm/perf_event.h> + +#include "perf_event.h" /* The size of a BTS record in bytes: */ #define BTS_RECORD_SIZE 24 @@ -37,24 +40,7 @@ struct pebs_record_nhm { u64 status, dla, dse, lat; }; -/* - * A debug store configuration. - * - * We only support architectures that use 64bit fields. - */ -struct debug_store { - u64 bts_buffer_base; - u64 bts_index; - u64 bts_absolute_maximum; - u64 bts_interrupt_threshold; - u64 pebs_buffer_base; - u64 pebs_index; - u64 pebs_absolute_maximum; - u64 pebs_interrupt_threshold; - u64 pebs_event_reset[MAX_PEBS_EVENTS]; -}; - -static void init_debug_store_on_cpu(int cpu) +void init_debug_store_on_cpu(int cpu) { struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; @@ -66,7 +52,7 @@ static void init_debug_store_on_cpu(int cpu) (u32)((u64)(unsigned long)ds >> 32)); } -static void fini_debug_store_on_cpu(int cpu) +void fini_debug_store_on_cpu(int cpu) { if (!per_cpu(cpu_hw_events, cpu).ds) return; @@ -175,7 +161,7 @@ static void release_ds_buffer(int cpu) kfree(ds); } -static void release_ds_buffers(void) +void release_ds_buffers(void) { int cpu; @@ -194,7 +180,7 @@ static void release_ds_buffers(void) put_online_cpus(); } -static void reserve_ds_buffers(void) +void reserve_ds_buffers(void) { int bts_err = 0, pebs_err = 0; int cpu; @@ -260,10 +246,10 @@ static void reserve_ds_buffers(void) * BTS */ -static struct event_constraint bts_constraint = +struct event_constraint bts_constraint = EVENT_CONSTRAINT(0, 1ULL << X86_PMC_IDX_FIXED_BTS, 0); -static void intel_pmu_enable_bts(u64 config) +void intel_pmu_enable_bts(u64 config) { unsigned long debugctlmsr; @@ -282,7 +268,7 @@ static void intel_pmu_enable_bts(u64 config) update_debugctlmsr(debugctlmsr); } -static void intel_pmu_disable_bts(void) +void intel_pmu_disable_bts(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); unsigned long debugctlmsr; @@ -299,7 +285,7 @@ static void intel_pmu_disable_bts(void) update_debugctlmsr(debugctlmsr); } -static int intel_pmu_drain_bts_buffer(void) +int intel_pmu_drain_bts_buffer(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct debug_store *ds = cpuc->ds; @@ -361,7 +347,7 @@ static int intel_pmu_drain_bts_buffer(void) /* * PEBS */ -static struct event_constraint intel_core2_pebs_event_constraints[] = { +struct event_constraint intel_core2_pebs_event_constraints[] = { INTEL_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */ INTEL_UEVENT_CONSTRAINT(0xfec1, 0x1), /* X87_OPS_RETIRED.ANY */ INTEL_UEVENT_CONSTRAINT(0x00c5, 0x1), /* BR_INST_RETIRED.MISPRED */ @@ -370,14 +356,14 @@ static struct event_constraint intel_core2_pebs_event_constraints[] = { EVENT_CONSTRAINT_END }; -static struct event_constraint intel_atom_pebs_event_constraints[] = { +struct event_constraint intel_atom_pebs_event_constraints[] = { INTEL_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */ INTEL_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */ INTEL_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */ EVENT_CONSTRAINT_END }; -static struct event_constraint intel_nehalem_pebs_event_constraints[] = { +struct event_constraint intel_nehalem_pebs_event_constraints[] = { INTEL_EVENT_CONSTRAINT(0x0b, 0xf), /* MEM_INST_RETIRED.* */ INTEL_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */ INTEL_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */ @@ -392,7 +378,7 @@ static struct event_constraint intel_nehalem_pebs_event_constraints[] = { EVENT_CONSTRAINT_END }; -static struct event_constraint intel_westmere_pebs_event_constraints[] = { +struct event_constraint intel_westmere_pebs_event_constraints[] = { INTEL_EVENT_CONSTRAINT(0x0b, 0xf), /* MEM_INST_RETIRED.* */ INTEL_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */ INTEL_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */ @@ -407,7 +393,7 @@ static struct event_constraint intel_westmere_pebs_event_constraints[] = { EVENT_CONSTRAINT_END }; -static struct event_constraint intel_snb_pebs_events[] = { +struct event_constraint intel_snb_pebs_event_constraints[] = { INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */ INTEL_UEVENT_CONSTRAINT(0x01c2, 0xf), /* UOPS_RETIRED.ALL */ INTEL_UEVENT_CONSTRAINT(0x02c2, 0xf), /* UOPS_RETIRED.RETIRE_SLOTS */ @@ -428,8 +414,7 @@ static struct event_constraint intel_snb_pebs_events[] = { EVENT_CONSTRAINT_END }; -static struct event_constraint * -intel_pebs_constraints(struct perf_event *event) +struct event_constraint *intel_pebs_constraints(struct perf_event *event) { struct event_constraint *c; @@ -446,7 +431,7 @@ intel_pebs_constraints(struct perf_event *event) return &emptyconstraint; } -static void intel_pmu_pebs_enable(struct perf_event *event) +void intel_pmu_pebs_enable(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; @@ -460,7 +445,7 @@ static void intel_pmu_pebs_enable(struct perf_event *event) intel_pmu_lbr_enable(event); } -static void intel_pmu_pebs_disable(struct perf_event *event) +void intel_pmu_pebs_disable(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; @@ -475,7 +460,7 @@ static void intel_pmu_pebs_disable(struct perf_event *event) intel_pmu_lbr_disable(event); } -static void intel_pmu_pebs_enable_all(void) +void intel_pmu_pebs_enable_all(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -483,7 +468,7 @@ static void intel_pmu_pebs_enable_all(void) wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled); } -static void intel_pmu_pebs_disable_all(void) +void intel_pmu_pebs_disable_all(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -576,8 +561,6 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) return 0; } -static int intel_pmu_save_and_restart(struct perf_event *event); - static void __intel_pmu_pebs_event(struct perf_event *event, struct pt_regs *iregs, void *__pebs) { @@ -716,7 +699,7 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs) * BTS, PEBS probe and setup */ -static void intel_ds_init(void) +void intel_ds_init(void) { /* * No support for 32bit formats @@ -749,15 +732,3 @@ static void intel_ds_init(void) } } } - -#else /* CONFIG_CPU_SUP_INTEL */ - -static void reserve_ds_buffers(void) -{ -} - -static void release_ds_buffers(void) -{ -} - -#endif /* CONFIG_CPU_SUP_INTEL */ diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index d202c1bece1a..3fab3de3ce96 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c @@ -1,4 +1,10 @@ -#ifdef CONFIG_CPU_SUP_INTEL +#include <linux/perf_event.h> +#include <linux/types.h> + +#include <asm/perf_event.h> +#include <asm/msr.h> + +#include "perf_event.h" enum { LBR_FORMAT_32 = 0x00, @@ -48,7 +54,7 @@ static void intel_pmu_lbr_reset_64(void) } } -static void intel_pmu_lbr_reset(void) +void intel_pmu_lbr_reset(void) { if (!x86_pmu.lbr_nr) return; @@ -59,7 +65,7 @@ static void intel_pmu_lbr_reset(void) intel_pmu_lbr_reset_64(); } -static void intel_pmu_lbr_enable(struct perf_event *event) +void intel_pmu_lbr_enable(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -81,7 +87,7 @@ static void intel_pmu_lbr_enable(struct perf_event *event) cpuc->lbr_users++; } -static void intel_pmu_lbr_disable(struct perf_event *event) +void intel_pmu_lbr_disable(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -95,7 +101,7 @@ static void intel_pmu_lbr_disable(struct perf_event *event) __intel_pmu_lbr_disable(); } -static void intel_pmu_lbr_enable_all(void) +void intel_pmu_lbr_enable_all(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -103,7 +109,7 @@ static void intel_pmu_lbr_enable_all(void) __intel_pmu_lbr_enable(); } -static void intel_pmu_lbr_disable_all(void) +void intel_pmu_lbr_disable_all(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -178,7 +184,7 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc) cpuc->lbr_stack.nr = i; } -static void intel_pmu_lbr_read(void) +void intel_pmu_lbr_read(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -191,7 +197,7 @@ static void intel_pmu_lbr_read(void) intel_pmu_lbr_read_64(cpuc); } -static void intel_pmu_lbr_init_core(void) +void intel_pmu_lbr_init_core(void) { x86_pmu.lbr_nr = 4; x86_pmu.lbr_tos = 0x01c9; @@ -199,7 +205,7 @@ static void intel_pmu_lbr_init_core(void) x86_pmu.lbr_to = 0x60; } -static void intel_pmu_lbr_init_nhm(void) +void intel_pmu_lbr_init_nhm(void) { x86_pmu.lbr_nr = 16; x86_pmu.lbr_tos = 0x01c9; @@ -207,12 +213,10 @@ static void intel_pmu_lbr_init_nhm(void) x86_pmu.lbr_to = 0x6c0; } -static void intel_pmu_lbr_init_atom(void) +void intel_pmu_lbr_init_atom(void) { x86_pmu.lbr_nr = 8; x86_pmu.lbr_tos = 0x01c9; x86_pmu.lbr_from = 0x40; x86_pmu.lbr_to = 0x60; } - -#endif /* CONFIG_CPU_SUP_INTEL */ diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index 7809d2bcb209..492bf1358a7c 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -7,9 +7,13 @@ * For licencing details see kernel-base/COPYING */ -#ifdef CONFIG_CPU_SUP_INTEL +#include <linux/perf_event.h> #include <asm/perf_event_p4.h> +#include <asm/hardirq.h> +#include <asm/apic.h> + +#include "perf_event.h" #define P4_CNTR_LIMIT 3 /* @@ -1303,7 +1307,7 @@ static __initconst const struct x86_pmu p4_pmu = { .perfctr_second_write = 1, }; -static __init int p4_pmu_init(void) +__init int p4_pmu_init(void) { unsigned int low, high; @@ -1326,5 +1330,3 @@ static __init int p4_pmu_init(void) return 0; } - -#endif /* CONFIG_CPU_SUP_INTEL */ diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index 20c097e33860..c7181befecde 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -1,4 +1,7 @@ -#ifdef CONFIG_CPU_SUP_INTEL +#include <linux/perf_event.h> +#include <linux/types.h> + +#include "perf_event.h" /* * Not sure about some of these @@ -114,7 +117,7 @@ static __initconst const struct x86_pmu p6_pmu = { .event_constraints = p6_event_constraints, }; -static __init int p6_pmu_init(void) +__init int p6_pmu_init(void) { switch (boot_cpu_data.x86_model) { case 1: @@ -138,5 +141,3 @@ static __init int p6_pmu_init(void) return 0; } - -#endif /* CONFIG_CPU_SUP_INTEL */ diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index 62ac8cb6ba27..14b23140e81f 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -85,6 +85,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "stepping\t: %d\n", c->x86_mask); else seq_printf(m, "stepping\t: unknown\n"); + if (c->microcode) + seq_printf(m, "microcode\t: 0x%x\n", c->microcode); if (cpu_has(c, X86_FEATURE_TSC)) { unsigned int freq = cpufreq_quick_get(cpu); diff --git a/arch/x86/kernel/cpu/rdrand.c b/arch/x86/kernel/cpu/rdrand.c new file mode 100644 index 000000000000..feca286c2bb4 --- /dev/null +++ b/arch/x86/kernel/cpu/rdrand.c @@ -0,0 +1,73 @@ +/* + * This file is part of the Linux kernel. + * + * Copyright (c) 2011, Intel Corporation + * Authors: Fenghua Yu <fenghua.yu@intel.com>, + * H. Peter Anvin <hpa@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <asm/processor.h> +#include <asm/archrandom.h> +#include <asm/sections.h> + +static int __init x86_rdrand_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_RDRAND); + return 1; +} +__setup("nordrand", x86_rdrand_setup); + +/* We can't use arch_get_random_long() here since alternatives haven't run */ +static inline int rdrand_long(unsigned long *v) +{ + int ok; + asm volatile("1: " RDRAND_LONG "\n\t" + "jc 2f\n\t" + "decl %0\n\t" + "jnz 1b\n\t" + "2:" + : "=r" (ok), "=a" (*v) + : "0" (RDRAND_RETRY_LOOPS)); + return ok; +} + +/* + * Force a reseed cycle; we are architecturally guaranteed a reseed + * after no more than 512 128-bit chunks of random data. This also + * acts as a test of the CPU capability. + */ +#define RESEED_LOOP ((512*128)/sizeof(unsigned long)) + +void __cpuinit x86_init_rdrand(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_ARCH_RANDOM + unsigned long tmp; + int i, count, ok; + + if (!cpu_has(c, X86_FEATURE_RDRAND)) + return; /* Nothing to do */ + + for (count = i = 0; i < RESEED_LOOP; i++) { + ok = rdrand_long(&tmp); + if (ok) + count++; + } + + if (count != RESEED_LOOP) + clear_cpu_cap(c, X86_FEATURE_RDRAND); +#endif +} diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c index 764c7c2b1811..13ad89971d47 100644 --- a/arch/x86/kernel/crash.c +++ b/arch/x86/kernel/crash.c @@ -32,15 +32,12 @@ int in_crash_kexec; #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC) -static void kdump_nmi_callback(int cpu, struct die_args *args) +static void kdump_nmi_callback(int cpu, struct pt_regs *regs) { - struct pt_regs *regs; #ifdef CONFIG_X86_32 struct pt_regs fixed_regs; #endif - regs = args->regs; - #ifdef CONFIG_X86_32 if (!user_mode_vm(regs)) { crash_fixup_ss_esp(&fixed_regs, regs); diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 5c1a91974918..f3f6f5344001 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -54,6 +54,7 @@ #include <asm/ftrace.h> #include <asm/irq_vectors.h> #include <asm/cpufeature.h> +#include <asm/alternative-asm.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> @@ -873,12 +874,7 @@ ENTRY(simd_coprocessor_error) 661: pushl_cfi $do_general_protection 662: .section .altinstructions,"a" - .balign 4 - .long 661b - .long 663f - .word X86_FEATURE_XMM - .byte 662b-661b - .byte 664f-663f + altinstruction_entry 661b, 663f, X86_FEATURE_XMM, 662b-661b, 664f-663f .previous .section .altinstr_replacement,"ax" 663: pushl $do_simd_coprocessor_error diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 6419bb05ecd5..faf8d5e74b0b 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -331,10 +331,15 @@ ENDPROC(native_usergs_sysret64) 1: incl PER_CPU_VAR(irq_count) jne 2f mov PER_CPU_VAR(irq_stack_ptr),%rsp - EMPTY_FRAME 0 + CFI_DEF_CFA_REGISTER rsi 2: /* Store previous stack value */ pushq %rsi + CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ + 0x77 /* DW_OP_breg7 */, 0, \ + 0x06 /* DW_OP_deref */, \ + 0x08 /* DW_OP_const1u */, SS+8-RBP, \ + 0x22 /* DW_OP_plus */ /* We entered an interrupt context - irqs are off: */ TRACE_IRQS_OFF .endm @@ -788,7 +793,6 @@ END(interrupt) subq $ORIG_RAX-RBP, %rsp CFI_ADJUST_CFA_OFFSET ORIG_RAX-RBP SAVE_ARGS_IRQ - PARTIAL_FRAME 0 call \func .endm @@ -813,10 +817,10 @@ ret_from_intr: /* Restore saved previous stack */ popq %rsi - leaq 16(%rsi), %rsp - + CFI_DEF_CFA_REGISTER rsi + leaq ARGOFFSET-RBP(%rsi), %rsp CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -16 + CFI_ADJUST_CFA_OFFSET RBP-ARGOFFSET exit_intr: GET_THREAD_INFO(%rcx) diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c index 3fee346ef545..cacdd46d184d 100644 --- a/arch/x86/kernel/jump_label.c +++ b/arch/x86/kernel/jump_label.c @@ -42,7 +42,7 @@ void arch_jump_label_transform(struct jump_entry *entry, put_online_cpus(); } -void arch_jump_label_text_poke_early(jump_label_t addr) +void __init_or_module arch_jump_label_text_poke_early(jump_label_t addr) { text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE); diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 00354d4919a9..faba5771acad 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -511,28 +511,37 @@ single_step_cont(struct pt_regs *regs, struct die_args *args) static int was_in_debug_nmi[NR_CPUS]; -static int __kgdb_notify(struct die_args *args, unsigned long cmd) +static int kgdb_nmi_handler(unsigned int cmd, struct pt_regs *regs) { - struct pt_regs *regs = args->regs; - switch (cmd) { - case DIE_NMI: + case NMI_LOCAL: if (atomic_read(&kgdb_active) != -1) { /* KGDB CPU roundup */ kgdb_nmicallback(raw_smp_processor_id(), regs); was_in_debug_nmi[raw_smp_processor_id()] = 1; touch_nmi_watchdog(); - return NOTIFY_STOP; + return NMI_HANDLED; } - return NOTIFY_DONE; + break; - case DIE_NMIUNKNOWN: + case NMI_UNKNOWN: if (was_in_debug_nmi[raw_smp_processor_id()]) { was_in_debug_nmi[raw_smp_processor_id()] = 0; - return NOTIFY_STOP; + return NMI_HANDLED; } - return NOTIFY_DONE; + break; + default: + /* do nothing */ + break; + } + return NMI_DONE; +} + +static int __kgdb_notify(struct die_args *args, unsigned long cmd) +{ + struct pt_regs *regs = args->regs; + switch (cmd) { case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { if (user_mode(regs)) @@ -590,11 +599,6 @@ kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) static struct notifier_block kgdb_notifier = { .notifier_call = kgdb_notify, - - /* - * Lowest-prio notifier priority, we want to be notified last: - */ - .priority = NMI_LOCAL_LOW_PRIOR, }; /** @@ -605,7 +609,31 @@ static struct notifier_block kgdb_notifier = { */ int kgdb_arch_init(void) { - return register_die_notifier(&kgdb_notifier); + int retval; + + retval = register_die_notifier(&kgdb_notifier); + if (retval) + goto out; + + retval = register_nmi_handler(NMI_LOCAL, kgdb_nmi_handler, + 0, "kgdb"); + if (retval) + goto out1; + + retval = register_nmi_handler(NMI_UNKNOWN, kgdb_nmi_handler, + 0, "kgdb"); + + if (retval) + goto out2; + + return retval; + +out2: + unregister_nmi_handler(NMI_LOCAL, "kgdb"); +out1: + unregister_die_notifier(&kgdb_notifier); +out: + return retval; } static void kgdb_hw_overflow_handler(struct perf_event *event, @@ -673,6 +701,8 @@ void kgdb_arch_exit(void) breakinfo[i].pev = NULL; } } + unregister_nmi_handler(NMI_UNKNOWN, "kgdb"); + unregister_nmi_handler(NMI_LOCAL, "kgdb"); unregister_die_notifier(&kgdb_notifier); } diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index f1a6244d7d93..7da647d8b64c 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -75,8 +75,11 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* * Undefined/reserved opcodes, conditional jump, Opcode Extension * Groups, and some special opcodes can not boost. + * This is non-const and volatile to keep gcc from statically + * optimizing it out, as variable_test_bit makes gcc think only + * *(unsigned long*) is used. */ -static const u32 twobyte_is_boostable[256 / 32] = { +static volatile u32 twobyte_is_boostable[256 / 32] = { /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ /* ---------------------------------------------- */ W(0x00, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0) | /* 00 */ diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 591be0ee1934..d494799aafcd 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -74,14 +74,13 @@ static struct equiv_cpu_entry *equiv_cpu_table; static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu); - u32 dummy; if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { pr_warning("CPU%d: family %d not supported\n", cpu, c->x86); return -1; } - rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); + csig->rev = c->microcode; pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); return 0; @@ -130,6 +129,7 @@ static int apply_microcode_amd(int cpu) int cpu_num = raw_smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; struct microcode_amd *mc_amd = uci->mc; + struct cpuinfo_x86 *c = &cpu_data(cpu); /* We should bind the task to the CPU */ BUG_ON(cpu_num != cpu); @@ -150,6 +150,7 @@ static int apply_microcode_amd(int cpu) pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev); uci->cpu_sig.rev = rev; + c->microcode = rev; return 0; } diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index f9242800bc84..f2d2a664e797 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -483,7 +483,13 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); pr_debug("CPU%d removed\n", cpu); break; - case CPU_DEAD: + + /* + * When a CPU goes offline, don't free up or invalidate the copy of + * the microcode in kernel memory, so that we can reuse it when the + * CPU comes back online without unnecessarily requesting the userspace + * for it again. + */ case CPU_UP_CANCELED_FROZEN: /* The CPU refused to come up during a system resume */ microcode_fini_cpu(cpu); diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 1a1b606d3e92..3ca42d0e43a2 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -161,12 +161,7 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) csig->pf = 1 << ((val[1] >> 18) & 7); } - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); - + csig->rev = c->microcode; pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", cpu_num, csig->sig, csig->pf, csig->rev); @@ -299,9 +294,9 @@ static int apply_microcode(int cpu) struct microcode_intel *mc_intel; struct ucode_cpu_info *uci; unsigned int val[2]; - int cpu_num; + int cpu_num = raw_smp_processor_id(); + struct cpuinfo_x86 *c = &cpu_data(cpu_num); - cpu_num = raw_smp_processor_id(); uci = ucode_cpu_info + cpu; mc_intel = uci->mc; @@ -317,7 +312,7 @@ static int apply_microcode(int cpu) (unsigned long) mc_intel->bits >> 16 >> 16); wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ + /* As documented in the SDM: Do a CPUID 1 here */ sync_core(); /* get the current revision from MSR 0x8B */ @@ -335,6 +330,7 @@ static int apply_microcode(int cpu) (mc_intel->hdr.date >> 16) & 0xff); uci->cpu_sig.rev = val[1]; + c->microcode = val[1]; return 0; } diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c new file mode 100644 index 000000000000..7ec5bd140b87 --- /dev/null +++ b/arch/x86/kernel/nmi.c @@ -0,0 +1,433 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs + * Copyright (C) 2011 Don Zickus Red Hat, Inc. + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +/* + * Handle hardware traps and faults. + */ +#include <linux/spinlock.h> +#include <linux/kprobes.h> +#include <linux/kdebug.h> +#include <linux/nmi.h> +#include <linux/delay.h> +#include <linux/hardirq.h> +#include <linux/slab.h> + +#include <linux/mca.h> + +#if defined(CONFIG_EDAC) +#include <linux/edac.h> +#endif + +#include <linux/atomic.h> +#include <asm/traps.h> +#include <asm/mach_traps.h> +#include <asm/nmi.h> + +#define NMI_MAX_NAMELEN 16 +struct nmiaction { + struct list_head list; + nmi_handler_t handler; + unsigned int flags; + char *name; +}; + +struct nmi_desc { + spinlock_t lock; + struct list_head head; +}; + +static struct nmi_desc nmi_desc[NMI_MAX] = +{ + { + .lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[0].lock), + .head = LIST_HEAD_INIT(nmi_desc[0].head), + }, + { + .lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[1].lock), + .head = LIST_HEAD_INIT(nmi_desc[1].head), + }, + +}; + +struct nmi_stats { + unsigned int normal; + unsigned int unknown; + unsigned int external; + unsigned int swallow; +}; + +static DEFINE_PER_CPU(struct nmi_stats, nmi_stats); + +static int ignore_nmis; + +int unknown_nmi_panic; +/* + * Prevent NMI reason port (0x61) being accessed simultaneously, can + * only be used in NMI handler. + */ +static DEFINE_RAW_SPINLOCK(nmi_reason_lock); + +static int __init setup_unknown_nmi_panic(char *str) +{ + unknown_nmi_panic = 1; + return 1; +} +__setup("unknown_nmi_panic", setup_unknown_nmi_panic); + +#define nmi_to_desc(type) (&nmi_desc[type]) + +static int notrace __kprobes nmi_handle(unsigned int type, struct pt_regs *regs, bool b2b) +{ + struct nmi_desc *desc = nmi_to_desc(type); + struct nmiaction *a; + int handled=0; + + rcu_read_lock(); + + /* + * NMIs are edge-triggered, which means if you have enough + * of them concurrently, you can lose some because only one + * can be latched at any given time. Walk the whole list + * to handle those situations. + */ + list_for_each_entry_rcu(a, &desc->head, list) + handled += a->handler(type, regs); + + rcu_read_unlock(); + + /* return total number of NMI events handled */ + return handled; +} + +static int __setup_nmi(unsigned int type, struct nmiaction *action) +{ + struct nmi_desc *desc = nmi_to_desc(type); + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + + /* + * most handlers of type NMI_UNKNOWN never return because + * they just assume the NMI is theirs. Just a sanity check + * to manage expectations + */ + WARN_ON_ONCE(type == NMI_UNKNOWN && !list_empty(&desc->head)); + + /* + * some handlers need to be executed first otherwise a fake + * event confuses some handlers (kdump uses this flag) + */ + if (action->flags & NMI_FLAG_FIRST) + list_add_rcu(&action->list, &desc->head); + else + list_add_tail_rcu(&action->list, &desc->head); + + spin_unlock_irqrestore(&desc->lock, flags); + return 0; +} + +static struct nmiaction *__free_nmi(unsigned int type, const char *name) +{ + struct nmi_desc *desc = nmi_to_desc(type); + struct nmiaction *n; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + + list_for_each_entry_rcu(n, &desc->head, list) { + /* + * the name passed in to describe the nmi handler + * is used as the lookup key + */ + if (!strcmp(n->name, name)) { + WARN(in_nmi(), + "Trying to free NMI (%s) from NMI context!\n", n->name); + list_del_rcu(&n->list); + break; + } + } + + spin_unlock_irqrestore(&desc->lock, flags); + synchronize_rcu(); + return (n); +} + +int register_nmi_handler(unsigned int type, nmi_handler_t handler, + unsigned long nmiflags, const char *devname) +{ + struct nmiaction *action; + int retval = -ENOMEM; + + if (!handler) + return -EINVAL; + + action = kzalloc(sizeof(struct nmiaction), GFP_KERNEL); + if (!action) + goto fail_action; + + action->handler = handler; + action->flags = nmiflags; + action->name = kstrndup(devname, NMI_MAX_NAMELEN, GFP_KERNEL); + if (!action->name) + goto fail_action_name; + + retval = __setup_nmi(type, action); + + if (retval) + goto fail_setup_nmi; + + return retval; + +fail_setup_nmi: + kfree(action->name); +fail_action_name: + kfree(action); +fail_action: + + return retval; +} +EXPORT_SYMBOL_GPL(register_nmi_handler); + +void unregister_nmi_handler(unsigned int type, const char *name) +{ + struct nmiaction *a; + + a = __free_nmi(type, name); + if (a) { + kfree(a->name); + kfree(a); + } +} + +EXPORT_SYMBOL_GPL(unregister_nmi_handler); + +static notrace __kprobes void +pci_serr_error(unsigned char reason, struct pt_regs *regs) +{ + pr_emerg("NMI: PCI system error (SERR) for reason %02x on CPU %d.\n", + reason, smp_processor_id()); + + /* + * On some machines, PCI SERR line is used to report memory + * errors. EDAC makes use of it. + */ +#if defined(CONFIG_EDAC) + if (edac_handler_set()) { + edac_atomic_assert_error(); + return; + } +#endif + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + pr_emerg("Dazed and confused, but trying to continue\n"); + + /* Clear and disable the PCI SERR error line. */ + reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_SERR; + outb(reason, NMI_REASON_PORT); +} + +static notrace __kprobes void +io_check_error(unsigned char reason, struct pt_regs *regs) +{ + unsigned long i; + + pr_emerg( + "NMI: IOCK error (debug interrupt?) for reason %02x on CPU %d.\n", + reason, smp_processor_id()); + show_registers(regs); + + if (panic_on_io_nmi) + panic("NMI IOCK error: Not continuing"); + + /* Re-enable the IOCK line, wait for a few seconds */ + reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_IOCHK; + outb(reason, NMI_REASON_PORT); + + i = 20000; + while (--i) { + touch_nmi_watchdog(); + udelay(100); + } + + reason &= ~NMI_REASON_CLEAR_IOCHK; + outb(reason, NMI_REASON_PORT); +} + +static notrace __kprobes void +unknown_nmi_error(unsigned char reason, struct pt_regs *regs) +{ + int handled; + + /* + * Use 'false' as back-to-back NMIs are dealt with one level up. + * Of course this makes having multiple 'unknown' handlers useless + * as only the first one is ever run (unless it can actually determine + * if it caused the NMI) + */ + handled = nmi_handle(NMI_UNKNOWN, regs, false); + if (handled) { + __this_cpu_add(nmi_stats.unknown, handled); + return; + } + + __this_cpu_add(nmi_stats.unknown, 1); + +#ifdef CONFIG_MCA + /* + * Might actually be able to figure out what the guilty party + * is: + */ + if (MCA_bus) { + mca_handle_nmi(); + return; + } +#endif + pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", + reason, smp_processor_id()); + + pr_emerg("Do you have a strange power saving mode enabled?\n"); + if (unknown_nmi_panic || panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + pr_emerg("Dazed and confused, but trying to continue\n"); +} + +static DEFINE_PER_CPU(bool, swallow_nmi); +static DEFINE_PER_CPU(unsigned long, last_nmi_rip); + +static notrace __kprobes void default_do_nmi(struct pt_regs *regs) +{ + unsigned char reason = 0; + int handled; + bool b2b = false; + + /* + * CPU-specific NMI must be processed before non-CPU-specific + * NMI, otherwise we may lose it, because the CPU-specific + * NMI can not be detected/processed on other CPUs. + */ + + /* + * Back-to-back NMIs are interesting because they can either + * be two NMI or more than two NMIs (any thing over two is dropped + * due to NMI being edge-triggered). If this is the second half + * of the back-to-back NMI, assume we dropped things and process + * more handlers. Otherwise reset the 'swallow' NMI behaviour + */ + if (regs->ip == __this_cpu_read(last_nmi_rip)) + b2b = true; + else + __this_cpu_write(swallow_nmi, false); + + __this_cpu_write(last_nmi_rip, regs->ip); + + handled = nmi_handle(NMI_LOCAL, regs, b2b); + __this_cpu_add(nmi_stats.normal, handled); + if (handled) { + /* + * There are cases when a NMI handler handles multiple + * events in the current NMI. One of these events may + * be queued for in the next NMI. Because the event is + * already handled, the next NMI will result in an unknown + * NMI. Instead lets flag this for a potential NMI to + * swallow. + */ + if (handled > 1) + __this_cpu_write(swallow_nmi, true); + return; + } + + /* Non-CPU-specific NMI: NMI sources can be processed on any CPU */ + raw_spin_lock(&nmi_reason_lock); + reason = get_nmi_reason(); + + if (reason & NMI_REASON_MASK) { + if (reason & NMI_REASON_SERR) + pci_serr_error(reason, regs); + else if (reason & NMI_REASON_IOCHK) + io_check_error(reason, regs); +#ifdef CONFIG_X86_32 + /* + * Reassert NMI in case it became active + * meanwhile as it's edge-triggered: + */ + reassert_nmi(); +#endif + __this_cpu_add(nmi_stats.external, 1); + raw_spin_unlock(&nmi_reason_lock); + return; + } + raw_spin_unlock(&nmi_reason_lock); + + /* + * Only one NMI can be latched at a time. To handle + * this we may process multiple nmi handlers at once to + * cover the case where an NMI is dropped. The downside + * to this approach is we may process an NMI prematurely, + * while its real NMI is sitting latched. This will cause + * an unknown NMI on the next run of the NMI processing. + * + * We tried to flag that condition above, by setting the + * swallow_nmi flag when we process more than one event. + * This condition is also only present on the second half + * of a back-to-back NMI, so we flag that condition too. + * + * If both are true, we assume we already processed this + * NMI previously and we swallow it. Otherwise we reset + * the logic. + * + * There are scenarios where we may accidentally swallow + * a 'real' unknown NMI. For example, while processing + * a perf NMI another perf NMI comes in along with a + * 'real' unknown NMI. These two NMIs get combined into + * one (as descibed above). When the next NMI gets + * processed, it will be flagged by perf as handled, but + * noone will know that there was a 'real' unknown NMI sent + * also. As a result it gets swallowed. Or if the first + * perf NMI returns two events handled then the second + * NMI will get eaten by the logic below, again losing a + * 'real' unknown NMI. But this is the best we can do + * for now. + */ + if (b2b && __this_cpu_read(swallow_nmi)) + __this_cpu_add(nmi_stats.swallow, 1); + else + unknown_nmi_error(reason, regs); +} + +dotraplinkage notrace __kprobes void +do_nmi(struct pt_regs *regs, long error_code) +{ + nmi_enter(); + + inc_irq_stat(__nmi_count); + + if (!ignore_nmis) + default_do_nmi(regs); + + nmi_exit(); +} + +void stop_nmi(void) +{ + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; +} + +/* reset the back-to-back NMI logic */ +void local_touch_nmi(void) +{ + __this_cpu_write(last_nmi_rip, 0); +} diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index b49d00da2aed..622872054fbe 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -117,8 +117,8 @@ again: } /* - * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter - * documentation. + * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel + * parameter documentation. */ static __init int iommu_setup(char *p) { diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index e7e3b019c439..b9b3b1a51643 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -49,7 +49,7 @@ void free_thread_xstate(struct task_struct *tsk) void free_thread_info(struct thread_info *ti) { free_thread_xstate(ti->task); - free_pages((unsigned long)ti, get_order(THREAD_SIZE)); + free_pages((unsigned long)ti, THREAD_ORDER); } void arch_task_cache_init(void) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 7a3b65107a27..795b79f984c2 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -57,6 +57,7 @@ #include <asm/idle.h> #include <asm/syscalls.h> #include <asm/debugreg.h> +#include <asm/nmi.h> asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); @@ -107,6 +108,7 @@ void cpu_idle(void) if (cpu_is_offline(cpu)) play_dead(); + local_touch_nmi(); local_irq_disable(); /* Don't trace irqs off for idle */ stop_critical_timings(); @@ -262,7 +264,7 @@ EXPORT_SYMBOL_GPL(start_thread); /* - * switch_to(x,yn) should switch tasks from x to y. + * switch_to(x,y) should switch tasks from x to y. * * We fsave/fwait so that an exception goes off at the right time * (as a call from the fsave or fwait in effect) rather than to diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index f693e44e1bf6..3bd7e6eebf31 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -51,6 +51,7 @@ #include <asm/idle.h> #include <asm/syscalls.h> #include <asm/debugreg.h> +#include <asm/nmi.h> asmlinkage extern void ret_from_fork(void); @@ -133,6 +134,7 @@ void cpu_idle(void) * from here on, until they go to idle. * Otherwise, idle callbacks can misfire. */ + local_touch_nmi(); local_irq_disable(); enter_idle(); /* Don't trace irqs off for idle */ diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 9242436e9937..e334be1182b9 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -464,7 +464,7 @@ static inline void kb_wait(void) } } -static void vmxoff_nmi(int cpu, struct die_args *args) +static void vmxoff_nmi(int cpu, struct pt_regs *regs) { cpu_emergency_vmxoff(); } @@ -736,14 +736,10 @@ static nmi_shootdown_cb shootdown_callback; static atomic_t waiting_for_crash_ipi; -static int crash_nmi_callback(struct notifier_block *self, - unsigned long val, void *data) +static int crash_nmi_callback(unsigned int val, struct pt_regs *regs) { int cpu; - if (val != DIE_NMI) - return NOTIFY_OK; - cpu = raw_smp_processor_id(); /* Don't do anything if this handler is invoked on crashing cpu. @@ -751,10 +747,10 @@ static int crash_nmi_callback(struct notifier_block *self, * an NMI if system was initially booted with nmi_watchdog parameter. */ if (cpu == crashing_cpu) - return NOTIFY_STOP; + return NMI_HANDLED; local_irq_disable(); - shootdown_callback(cpu, (struct die_args *)data); + shootdown_callback(cpu, regs); atomic_dec(&waiting_for_crash_ipi); /* Assume hlt works */ @@ -762,7 +758,7 @@ static int crash_nmi_callback(struct notifier_block *self, for (;;) cpu_relax(); - return 1; + return NMI_HANDLED; } static void smp_send_nmi_allbutself(void) @@ -770,12 +766,6 @@ static void smp_send_nmi_allbutself(void) apic->send_IPI_allbutself(NMI_VECTOR); } -static struct notifier_block crash_nmi_nb = { - .notifier_call = crash_nmi_callback, - /* we want to be the first one called */ - .priority = NMI_LOCAL_HIGH_PRIOR+1, -}; - /* Halt all other CPUs, calling the specified function on each of them * * This function can be used to halt all other CPUs on crash @@ -794,7 +784,8 @@ void nmi_shootdown_cpus(nmi_shootdown_cb callback) atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); /* Would it be better to replace the trap vector here? */ - if (register_die_notifier(&crash_nmi_nb)) + if (register_nmi_handler(NMI_LOCAL, crash_nmi_callback, + NMI_FLAG_FIRST, "crash")) return; /* return what? */ /* Ensure the new callback function is set before sending * out the NMI diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 3f2ad2640d85..ccdbc16b8941 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -42,8 +42,11 @@ int mach_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; + unsigned long flags; int retval = 0; + spin_lock_irqsave(&rtc_lock, flags); + /* tell the clock it's being set */ save_control = CMOS_READ(RTC_CONTROL); CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); @@ -93,12 +96,17 @@ int mach_set_rtc_mmss(unsigned long nowtime) CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock_irqrestore(&rtc_lock, flags); + return retval; } unsigned long mach_get_cmos_time(void) { unsigned int status, year, mon, day, hour, min, sec, century = 0; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); /* * If UIP is clear, then we have >= 244 microseconds before @@ -125,6 +133,8 @@ unsigned long mach_get_cmos_time(void) status = CMOS_READ(RTC_CONTROL); WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY)); + spin_unlock_irqrestore(&rtc_lock, flags); + if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) { sec = bcd2bin(sec); min = bcd2bin(min); @@ -169,24 +179,15 @@ EXPORT_SYMBOL(rtc_cmos_write); int update_persistent_clock(struct timespec now) { - unsigned long flags; - int retval; - - spin_lock_irqsave(&rtc_lock, flags); - retval = x86_platform.set_wallclock(now.tv_sec); - spin_unlock_irqrestore(&rtc_lock, flags); - - return retval; + return x86_platform.set_wallclock(now.tv_sec); } /* not static: needed by APM */ void read_persistent_clock(struct timespec *ts) { - unsigned long retval, flags; + unsigned long retval; - spin_lock_irqsave(&rtc_lock, flags); retval = x86_platform.get_wallclock(); - spin_unlock_irqrestore(&rtc_lock, flags); ts->tv_sec = retval; ts->tv_nsec = 0; diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index ff14a5044ce6..051489082d59 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -14,10 +14,73 @@ #include <linux/personality.h> #include <linux/random.h> #include <linux/uaccess.h> +#include <linux/elf.h> #include <asm/ia32.h> #include <asm/syscalls.h> +/* + * Align a virtual address to avoid aliasing in the I$ on AMD F15h. + * + * @flags denotes the allocation direction - bottomup or topdown - + * or vDSO; see call sites below. + */ +unsigned long align_addr(unsigned long addr, struct file *filp, + enum align_flags flags) +{ + unsigned long tmp_addr; + + /* handle 32- and 64-bit case with a single conditional */ + if (va_align.flags < 0 || !(va_align.flags & (2 - mmap_is_ia32()))) + return addr; + + if (!(current->flags & PF_RANDOMIZE)) + return addr; + + if (!((flags & ALIGN_VDSO) || filp)) + return addr; + + tmp_addr = addr; + + /* + * We need an address which is <= than the original + * one only when in topdown direction. + */ + if (!(flags & ALIGN_TOPDOWN)) + tmp_addr += va_align.mask; + + tmp_addr &= ~va_align.mask; + + return tmp_addr; +} + +static int __init control_va_addr_alignment(char *str) +{ + /* guard against enabling this on other CPU families */ + if (va_align.flags < 0) + return 1; + + if (*str == 0) + return 1; + + if (*str == '=') + str++; + + if (!strcmp(str, "32")) + va_align.flags = ALIGN_VA_32; + else if (!strcmp(str, "64")) + va_align.flags = ALIGN_VA_64; + else if (!strcmp(str, "off")) + va_align.flags = 0; + else if (!strcmp(str, "on")) + va_align.flags = ALIGN_VA_32 | ALIGN_VA_64; + else + return 0; + + return 1; +} +__setup("align_va_addr", control_va_addr_alignment); + SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, off) @@ -92,6 +155,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, start_addr = addr; full_search: + + addr = align_addr(addr, filp, 0); + for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { /* At this point: (!vma || addr < vma->vm_end). */ if (end - len < addr) { @@ -117,6 +183,7 @@ full_search: mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; + addr = align_addr(addr, filp, 0); } } @@ -161,10 +228,13 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, /* make sure it can fit in the remaining address space */ if (addr > len) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) + unsigned long tmp_addr = align_addr(addr - len, filp, + ALIGN_TOPDOWN); + + vma = find_vma(mm, tmp_addr); + if (!vma || tmp_addr + len <= vma->vm_start) /* remember the address as a hint for next time */ - return mm->free_area_cache = addr-len; + return mm->free_area_cache = tmp_addr; } if (mm->mmap_base < len) @@ -173,6 +243,8 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, addr = mm->mmap_base-len; do { + addr = align_addr(addr, filp, ALIGN_TOPDOWN); + /* * Lookup failure means no vma is above this address, * else if new region fits below vma->vm_start, diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index fbb0a045a1a2..bc19be332bc9 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -168,7 +168,7 @@ ENTRY(sys_call_table) .long ptregs_vm86 .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 6913369c234c..a8e3eb83466c 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -81,15 +81,6 @@ gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, }; DECLARE_BITMAP(used_vectors, NR_VECTORS); EXPORT_SYMBOL_GPL(used_vectors); -static int ignore_nmis; - -int unknown_nmi_panic; -/* - * Prevent NMI reason port (0x61) being accessed simultaneously, can - * only be used in NMI handler. - */ -static DEFINE_RAW_SPINLOCK(nmi_reason_lock); - static inline void conditional_sti(struct pt_regs *regs) { if (regs->flags & X86_EFLAGS_IF) @@ -307,152 +298,6 @@ gp_in_kernel: die("general protection fault", regs, error_code); } -static int __init setup_unknown_nmi_panic(char *str) -{ - unknown_nmi_panic = 1; - return 1; -} -__setup("unknown_nmi_panic", setup_unknown_nmi_panic); - -static notrace __kprobes void -pci_serr_error(unsigned char reason, struct pt_regs *regs) -{ - pr_emerg("NMI: PCI system error (SERR) for reason %02x on CPU %d.\n", - reason, smp_processor_id()); - - /* - * On some machines, PCI SERR line is used to report memory - * errors. EDAC makes use of it. - */ -#if defined(CONFIG_EDAC) - if (edac_handler_set()) { - edac_atomic_assert_error(); - return; - } -#endif - - if (panic_on_unrecovered_nmi) - panic("NMI: Not continuing"); - - pr_emerg("Dazed and confused, but trying to continue\n"); - - /* Clear and disable the PCI SERR error line. */ - reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_SERR; - outb(reason, NMI_REASON_PORT); -} - -static notrace __kprobes void -io_check_error(unsigned char reason, struct pt_regs *regs) -{ - unsigned long i; - - pr_emerg( - "NMI: IOCK error (debug interrupt?) for reason %02x on CPU %d.\n", - reason, smp_processor_id()); - show_registers(regs); - - if (panic_on_io_nmi) - panic("NMI IOCK error: Not continuing"); - - /* Re-enable the IOCK line, wait for a few seconds */ - reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_IOCHK; - outb(reason, NMI_REASON_PORT); - - i = 20000; - while (--i) { - touch_nmi_watchdog(); - udelay(100); - } - - reason &= ~NMI_REASON_CLEAR_IOCHK; - outb(reason, NMI_REASON_PORT); -} - -static notrace __kprobes void -unknown_nmi_error(unsigned char reason, struct pt_regs *regs) -{ - if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == - NOTIFY_STOP) - return; -#ifdef CONFIG_MCA - /* - * Might actually be able to figure out what the guilty party - * is: - */ - if (MCA_bus) { - mca_handle_nmi(); - return; - } -#endif - pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", - reason, smp_processor_id()); - - pr_emerg("Do you have a strange power saving mode enabled?\n"); - if (unknown_nmi_panic || panic_on_unrecovered_nmi) - panic("NMI: Not continuing"); - - pr_emerg("Dazed and confused, but trying to continue\n"); -} - -static notrace __kprobes void default_do_nmi(struct pt_regs *regs) -{ - unsigned char reason = 0; - - /* - * CPU-specific NMI must be processed before non-CPU-specific - * NMI, otherwise we may lose it, because the CPU-specific - * NMI can not be detected/processed on other CPUs. - */ - if (notify_die(DIE_NMI, "nmi", regs, 0, 2, SIGINT) == NOTIFY_STOP) - return; - - /* Non-CPU-specific NMI: NMI sources can be processed on any CPU */ - raw_spin_lock(&nmi_reason_lock); - reason = get_nmi_reason(); - - if (reason & NMI_REASON_MASK) { - if (reason & NMI_REASON_SERR) - pci_serr_error(reason, regs); - else if (reason & NMI_REASON_IOCHK) - io_check_error(reason, regs); -#ifdef CONFIG_X86_32 - /* - * Reassert NMI in case it became active - * meanwhile as it's edge-triggered: - */ - reassert_nmi(); -#endif - raw_spin_unlock(&nmi_reason_lock); - return; - } - raw_spin_unlock(&nmi_reason_lock); - - unknown_nmi_error(reason, regs); -} - -dotraplinkage notrace __kprobes void -do_nmi(struct pt_regs *regs, long error_code) -{ - nmi_enter(); - - inc_irq_stat(__nmi_count); - - if (!ignore_nmis) - default_do_nmi(regs); - - nmi_exit(); -} - -void stop_nmi(void) -{ - ignore_nmis++; -} - -void restart_nmi(void) -{ - ignore_nmis--; -} - /* May run on IST stack. */ dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code) { diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 18ae83dd1cd7..b56c65de384d 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -56,7 +56,7 @@ DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) = .lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock), }; -static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE; +static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE; static int __init vsyscall_setup(char *str) { diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 6f08bc940fa8..8b4cc5f067de 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3603,7 +3603,7 @@ done_prefixes: break; case Src2CL: ctxt->src2.bytes = 1; - ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8; + ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff; break; case Src2ImmByte: rc = decode_imm(ctxt, &ctxt->src2, 1, true); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 1c5b69373a00..8e8da7960dbe 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte) /* xchg acts as a barrier before the setting of the high bits */ orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low); - orig.spte_high = ssptep->spte_high = sspte.spte_high; + orig.spte_high = ssptep->spte_high; + ssptep->spte_high = sspte.spte_high; count_spte_clear(sptep, spte); return orig.spte; diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 9f33b984d0ef..374562ed6704 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -22,14 +22,23 @@ #include <asm/inat.h> #include <asm/insn.h> -#define get_next(t, insn) \ - ({t r; r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); r; }) +/* Verify next sizeof(t) bytes can be on the same instruction */ +#define validate_next(t, insn, n) \ + ((insn)->next_byte + sizeof(t) + n - (insn)->kaddr <= MAX_INSN_SIZE) + +#define __get_next(t, insn) \ + ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); r; }) + +#define __peek_nbyte_next(t, insn, n) \ + ({ t r = *(t*)((insn)->next_byte + n); r; }) -#define peek_next(t, insn) \ - ({t r; r = *(t*)insn->next_byte; r; }) +#define get_next(t, insn) \ + ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) #define peek_nbyte_next(t, insn, n) \ - ({t r; r = *(t*)((insn)->next_byte + n); r; }) + ({ if (unlikely(!validate_next(t, insn, n))) goto err_out; __peek_nbyte_next(t, insn, n); }) + +#define peek_next(t, insn) peek_nbyte_next(t, insn, 0) /** * insn_init() - initialize struct insn @@ -158,6 +167,8 @@ vex_end: insn->vex_prefix.got = 1; prefixes->got = 1; + +err_out: return; } @@ -208,6 +219,9 @@ void insn_get_opcode(struct insn *insn) insn->attr = 0; /* This instruction is bad */ end: opcode->got = 1; + +err_out: + return; } /** @@ -241,6 +255,9 @@ void insn_get_modrm(struct insn *insn) if (insn->x86_64 && inat_is_force64(insn->attr)) insn->opnd_bytes = 8; modrm->got = 1; + +err_out: + return; } @@ -290,6 +307,9 @@ void insn_get_sib(struct insn *insn) } } insn->sib.got = 1; + +err_out: + return; } @@ -351,6 +371,9 @@ void insn_get_displacement(struct insn *insn) } out: insn->displacement.got = 1; + +err_out: + return; } /* Decode moffset16/32/64 */ @@ -373,6 +396,9 @@ static void __get_moffset(struct insn *insn) break; } insn->moffset1.got = insn->moffset2.got = 1; + +err_out: + return; } /* Decode imm v32(Iz) */ @@ -389,6 +415,9 @@ static void __get_immv32(struct insn *insn) insn->immediate.nbytes = 4; break; } + +err_out: + return; } /* Decode imm v64(Iv/Ov) */ @@ -411,6 +440,9 @@ static void __get_immv(struct insn *insn) break; } insn->immediate1.got = insn->immediate2.got = 1; + +err_out: + return; } /* Decode ptr16:16/32(Ap) */ @@ -432,6 +464,9 @@ static void __get_immptr(struct insn *insn) insn->immediate2.value = get_next(unsigned short, insn); insn->immediate2.nbytes = 2; insn->immediate1.got = insn->immediate2.got = 1; + +err_out: + return; } /** @@ -496,6 +531,9 @@ void insn_get_immediate(struct insn *insn) } done: insn->immediate.got = 1; + +err_out: + return; } /** diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 0d17c8c50acd..5db0490deb07 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -17,7 +17,7 @@ #include <asm/traps.h> /* dotraplinkage, ... */ #include <asm/pgalloc.h> /* pgd_*(), ... */ #include <asm/kmemcheck.h> /* kmemcheck_*(), ... */ -#include <asm/vsyscall.h> +#include <asm/fixmap.h> /* VSYSCALL_START */ /* * Page fault error code bits: @@ -420,12 +420,14 @@ static noinline __kprobes int vmalloc_fault(unsigned long address) return 0; } +#ifdef CONFIG_CPU_SUP_AMD static const char errata93_warning[] = KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n" "******* Working around it, but it may cause SEGVs or burn power.\n" "******* Please consider a BIOS update.\n" "******* Disabling USB legacy in the BIOS may also help.\n"; +#endif /* * No vm86 mode in 64-bit mode: @@ -505,7 +507,11 @@ bad: */ static int is_errata93(struct pt_regs *regs, unsigned long address) { -#ifdef CONFIG_X86_64 +#if defined(CONFIG_X86_64) && defined(CONFIG_CPU_SUP_AMD) + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD + || boot_cpu_data.x86 != 0xf) + return 0; + if (address != regs->ip) return 0; diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 30326443ab81..87488b93a65c 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -63,9 +63,8 @@ static void __init find_early_table_space(unsigned long end, int use_pse, #ifdef CONFIG_X86_32 /* for fixmap */ tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE); - - good_end = max_pfn_mapped << PAGE_SHIFT; #endif + good_end = max_pfn_mapped << PAGE_SHIFT; base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE); if (base == MEMBLOCK_ERROR) diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c index 1dab5194fd9d..4b5ba85eb5c9 100644 --- a/arch/x86/mm/mmap.c +++ b/arch/x86/mm/mmap.c @@ -31,6 +31,10 @@ #include <linux/sched.h> #include <asm/elf.h> +struct __read_mostly va_alignment va_align = { + .flags = -1, +}; + static unsigned int stack_maxrandom_size(void) { unsigned int max = 0; @@ -42,7 +46,6 @@ static unsigned int stack_maxrandom_size(void) return max; } - /* * Top of mmap area (just below the process stack). * @@ -51,21 +54,6 @@ static unsigned int stack_maxrandom_size(void) #define MIN_GAP (128*1024*1024UL + stack_maxrandom_size()) #define MAX_GAP (TASK_SIZE/6*5) -/* - * True on X86_32 or when emulating IA32 on X86_64 - */ -static int mmap_is_ia32(void) -{ -#ifdef CONFIG_X86_32 - return 1; -#endif -#ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) - return 1; -#endif - return 0; -} - static int mmap_is_legacy(void) { if (current->personality & ADDR_COMPAT_LAYOUT) diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 67421f38a215..de54b9b278a7 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -29,7 +29,6 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/io.h> -#include <linux/version.h> #include <linux/kallsyms.h> #include <asm/pgtable.h> #include <linux/mmiotrace.h> diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 68894fdc034b..75f9528e0372 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -61,26 +61,15 @@ u64 op_x86_get_ctrl(struct op_x86_model_spec const *model, } -static int profile_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) +static int profile_exceptions_notify(unsigned int val, struct pt_regs *regs) { - struct die_args *args = (struct die_args *)data; - int ret = NOTIFY_DONE; - - switch (val) { - case DIE_NMI: - if (ctr_running) - model->check_ctrs(args->regs, &__get_cpu_var(cpu_msrs)); - else if (!nmi_enabled) - break; - else - model->stop(&__get_cpu_var(cpu_msrs)); - ret = NOTIFY_STOP; - break; - default: - break; - } - return ret; + if (ctr_running) + model->check_ctrs(regs, &__get_cpu_var(cpu_msrs)); + else if (!nmi_enabled) + return NMI_DONE; + else + model->stop(&__get_cpu_var(cpu_msrs)); + return NMI_HANDLED; } static void nmi_cpu_save_registers(struct op_msrs *msrs) @@ -355,20 +344,14 @@ static void nmi_cpu_setup(void *dummy) int cpu = smp_processor_id(); struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu); nmi_cpu_save_registers(msrs); - spin_lock(&oprofilefs_lock); + raw_spin_lock(&oprofilefs_lock); model->setup_ctrs(model, msrs); nmi_cpu_setup_mux(cpu, msrs); - spin_unlock(&oprofilefs_lock); + raw_spin_unlock(&oprofilefs_lock); per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC); apic_write(APIC_LVTPC, APIC_DM_NMI); } -static struct notifier_block profile_exceptions_nb = { - .notifier_call = profile_exceptions_notify, - .next = NULL, - .priority = NMI_LOCAL_LOW_PRIOR, -}; - static void nmi_cpu_restore_registers(struct op_msrs *msrs) { struct op_msr *counters = msrs->counters; @@ -402,8 +385,6 @@ static void nmi_cpu_shutdown(void *dummy) apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu)); apic_write(APIC_LVTERR, v); nmi_cpu_restore_registers(msrs); - if (model->cpu_down) - model->cpu_down(); } static void nmi_cpu_up(void *dummy) @@ -508,7 +489,8 @@ static int nmi_setup(void) ctr_running = 0; /* make variables visible to the nmi handler: */ smp_mb(); - err = register_die_notifier(&profile_exceptions_nb); + err = register_nmi_handler(NMI_LOCAL, profile_exceptions_notify, + 0, "oprofile"); if (err) goto fail; @@ -538,7 +520,7 @@ static void nmi_shutdown(void) put_online_cpus(); /* make variables visible to the nmi handler: */ smp_mb(); - unregister_die_notifier(&profile_exceptions_nb); + unregister_nmi_handler(NMI_LOCAL, "oprofile"); msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); free_msrs(); diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c index 720bf5a53c51..7f8052cd6620 100644 --- a/arch/x86/oprofile/nmi_timer_int.c +++ b/arch/x86/oprofile/nmi_timer_int.c @@ -18,32 +18,16 @@ #include <asm/apic.h> #include <asm/ptrace.h> -static int profile_timer_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) +static int profile_timer_exceptions_notify(unsigned int val, struct pt_regs *regs) { - struct die_args *args = (struct die_args *)data; - int ret = NOTIFY_DONE; - - switch (val) { - case DIE_NMI: - oprofile_add_sample(args->regs, 0); - ret = NOTIFY_STOP; - break; - default: - break; - } - return ret; + oprofile_add_sample(regs, 0); + return NMI_HANDLED; } -static struct notifier_block profile_timer_exceptions_nb = { - .notifier_call = profile_timer_exceptions_notify, - .next = NULL, - .priority = NMI_LOW_PRIOR, -}; - static int timer_start(void) { - if (register_die_notifier(&profile_timer_exceptions_nb)) + if (register_nmi_handler(NMI_LOCAL, profile_timer_exceptions_notify, + 0, "oprofile-timer")) return 1; return 0; } @@ -51,7 +35,7 @@ static int timer_start(void) static void timer_stop(void) { - unregister_die_notifier(&profile_timer_exceptions_nb); + unregister_nmi_handler(NMI_LOCAL, "oprofile-timer"); synchronize_sched(); /* Allow already-started NMIs to complete. */ } diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index 9cbb710dc94b..303f08637826 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -29,8 +29,6 @@ #include "op_x86_model.h" #include "op_counter.h" -#define NUM_COUNTERS 4 -#define NUM_COUNTERS_F15H 6 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX #define NUM_VIRT_COUNTERS 32 #else @@ -70,62 +68,12 @@ static struct ibs_config ibs_config; static struct ibs_state ibs_state; /* - * IBS cpuid feature detection - */ - -#define IBS_CPUID_FEATURES 0x8000001b - -/* - * Same bit mask as for IBS cpuid feature flags (Fn8000_001B_EAX), but - * bit 0 is used to indicate the existence of IBS. - */ -#define IBS_CAPS_AVAIL (1U<<0) -#define IBS_CAPS_FETCHSAM (1U<<1) -#define IBS_CAPS_OPSAM (1U<<2) -#define IBS_CAPS_RDWROPCNT (1U<<3) -#define IBS_CAPS_OPCNT (1U<<4) -#define IBS_CAPS_BRNTRGT (1U<<5) -#define IBS_CAPS_OPCNTEXT (1U<<6) - -#define IBS_CAPS_DEFAULT (IBS_CAPS_AVAIL \ - | IBS_CAPS_FETCHSAM \ - | IBS_CAPS_OPSAM) - -/* - * IBS APIC setup - */ -#define IBSCTL 0x1cc -#define IBSCTL_LVT_OFFSET_VALID (1ULL<<8) -#define IBSCTL_LVT_OFFSET_MASK 0x0F - -/* * IBS randomization macros */ #define IBS_RANDOM_BITS 12 #define IBS_RANDOM_MASK ((1ULL << IBS_RANDOM_BITS) - 1) #define IBS_RANDOM_MAXCNT_OFFSET (1ULL << (IBS_RANDOM_BITS - 5)) -static u32 get_ibs_caps(void) -{ - u32 ibs_caps; - unsigned int max_level; - - if (!boot_cpu_has(X86_FEATURE_IBS)) - return 0; - - /* check IBS cpuid feature flags */ - max_level = cpuid_eax(0x80000000); - if (max_level < IBS_CPUID_FEATURES) - return IBS_CAPS_DEFAULT; - - ibs_caps = cpuid_eax(IBS_CPUID_FEATURES); - if (!(ibs_caps & IBS_CAPS_AVAIL)) - /* cpuid flags not valid */ - return IBS_CAPS_DEFAULT; - - return ibs_caps; -} - /* * 16-bit Linear Feedback Shift Register (LFSR) * @@ -316,81 +264,6 @@ static void op_amd_stop_ibs(void) wrmsrl(MSR_AMD64_IBSOPCTL, 0); } -static inline int get_eilvt(int offset) -{ - return !setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_NMI, 1); -} - -static inline int put_eilvt(int offset) -{ - return !setup_APIC_eilvt(offset, 0, 0, 1); -} - -static inline int ibs_eilvt_valid(void) -{ - int offset; - u64 val; - int valid = 0; - - preempt_disable(); - - rdmsrl(MSR_AMD64_IBSCTL, val); - offset = val & IBSCTL_LVT_OFFSET_MASK; - - if (!(val & IBSCTL_LVT_OFFSET_VALID)) { - pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", - smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); - goto out; - } - - if (!get_eilvt(offset)) { - pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", - smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); - goto out; - } - - valid = 1; -out: - preempt_enable(); - - return valid; -} - -static inline int get_ibs_offset(void) -{ - u64 val; - - rdmsrl(MSR_AMD64_IBSCTL, val); - if (!(val & IBSCTL_LVT_OFFSET_VALID)) - return -EINVAL; - - return val & IBSCTL_LVT_OFFSET_MASK; -} - -static void setup_APIC_ibs(void) -{ - int offset; - - offset = get_ibs_offset(); - if (offset < 0) - goto failed; - - if (!setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_NMI, 0)) - return; -failed: - pr_warn("oprofile: IBS APIC setup failed on cpu #%d\n", - smp_processor_id()); -} - -static void clear_APIC_ibs(void) -{ - int offset; - - offset = get_ibs_offset(); - if (offset >= 0) - setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_FIX, 1); -} - #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX static void op_mux_switch_ctrl(struct op_x86_model_spec const *model, @@ -439,7 +312,7 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs) goto fail; } /* both registers must be reserved */ - if (num_counters == NUM_COUNTERS_F15H) { + if (num_counters == AMD64_NUM_COUNTERS_F15H) { msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1); msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1); } else { @@ -504,15 +377,6 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model, val |= op_x86_get_ctrl(model, &counter_config[virt]); wrmsrl(msrs->controls[i].addr, val); } - - if (ibs_caps) - setup_APIC_ibs(); -} - -static void op_amd_cpu_shutdown(void) -{ - if (ibs_caps) - clear_APIC_ibs(); } static int op_amd_check_ctrs(struct pt_regs * const regs, @@ -575,86 +439,6 @@ static void op_amd_stop(struct op_msrs const * const msrs) op_amd_stop_ibs(); } -static int setup_ibs_ctl(int ibs_eilvt_off) -{ - struct pci_dev *cpu_cfg; - int nodes; - u32 value = 0; - - nodes = 0; - cpu_cfg = NULL; - do { - cpu_cfg = pci_get_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_10H_NB_MISC, - cpu_cfg); - if (!cpu_cfg) - break; - ++nodes; - pci_write_config_dword(cpu_cfg, IBSCTL, ibs_eilvt_off - | IBSCTL_LVT_OFFSET_VALID); - pci_read_config_dword(cpu_cfg, IBSCTL, &value); - if (value != (ibs_eilvt_off | IBSCTL_LVT_OFFSET_VALID)) { - pci_dev_put(cpu_cfg); - printk(KERN_DEBUG "Failed to setup IBS LVT offset, " - "IBSCTL = 0x%08x\n", value); - return -EINVAL; - } - } while (1); - - if (!nodes) { - printk(KERN_DEBUG "No CPU node configured for IBS\n"); - return -ENODEV; - } - - return 0; -} - -/* - * This runs only on the current cpu. We try to find an LVT offset and - * setup the local APIC. For this we must disable preemption. On - * success we initialize all nodes with this offset. This updates then - * the offset in the IBS_CTL per-node msr. The per-core APIC setup of - * the IBS interrupt vector is called from op_amd_setup_ctrs()/op_- - * amd_cpu_shutdown() using the new offset. - */ -static int force_ibs_eilvt_setup(void) -{ - int offset; - int ret; - - preempt_disable(); - /* find the next free available EILVT entry, skip offset 0 */ - for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) { - if (get_eilvt(offset)) - break; - } - preempt_enable(); - - if (offset == APIC_EILVT_NR_MAX) { - printk(KERN_DEBUG "No EILVT entry available\n"); - return -EBUSY; - } - - ret = setup_ibs_ctl(offset); - if (ret) - goto out; - - if (!ibs_eilvt_valid()) { - ret = -EFAULT; - goto out; - } - - pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); - pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); - - return 0; -out: - preempt_disable(); - put_eilvt(offset); - preempt_enable(); - return ret; -} - /* * check and reserve APIC extended interrupt LVT offset for IBS if * available @@ -667,17 +451,6 @@ static void init_ibs(void) if (!ibs_caps) return; - if (ibs_eilvt_valid()) - goto out; - - if (!force_ibs_eilvt_setup()) - goto out; - - /* Failed to setup ibs */ - ibs_caps = 0; - return; - -out: printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); } @@ -741,9 +514,9 @@ static int op_amd_init(struct oprofile_operations *ops) ops->create_files = setup_ibs_files; if (boot_cpu_data.x86 == 0x15) { - num_counters = NUM_COUNTERS_F15H; + num_counters = AMD64_NUM_COUNTERS_F15H; } else { - num_counters = NUM_COUNTERS; + num_counters = AMD64_NUM_COUNTERS; } op_amd_spec.num_counters = num_counters; @@ -760,7 +533,6 @@ struct op_x86_model_spec op_amd_spec = { .init = op_amd_init, .fill_in_addresses = &op_amd_fill_in_addresses, .setup_ctrs = &op_amd_setup_ctrs, - .cpu_down = &op_amd_cpu_shutdown, .check_ctrs = &op_amd_check_ctrs, .start = &op_amd_start, .stop = &op_amd_stop, diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 94b745045e45..d90528ea5412 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -28,7 +28,7 @@ static int counter_width = 32; #define MSR_PPRO_EVENTSEL_RESERVED ((0xFFFFFFFFULL<<32)|(1ULL<<21)) -static u64 *reset_value; +static u64 reset_value[OP_MAX_COUNTER]; static void ppro_shutdown(struct op_msrs const * const msrs) { @@ -40,10 +40,6 @@ static void ppro_shutdown(struct op_msrs const * const msrs) release_perfctr_nmi(MSR_P6_PERFCTR0 + i); release_evntsel_nmi(MSR_P6_EVNTSEL0 + i); } - if (reset_value) { - kfree(reset_value); - reset_value = NULL; - } } static int ppro_fill_in_addresses(struct op_msrs * const msrs) @@ -79,13 +75,6 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model, u64 val; int i; - if (!reset_value) { - reset_value = kzalloc(sizeof(reset_value[0]) * num_counters, - GFP_ATOMIC); - if (!reset_value) - return; - } - if (cpu_has_arch_perfmon) { union cpuid10_eax eax; eax.full = cpuid_eax(0xa); @@ -141,13 +130,6 @@ static int ppro_check_ctrs(struct pt_regs * const regs, u64 val; int i; - /* - * This can happen if perf counters are in use when - * we steal the die notifier NMI. - */ - if (unlikely(!reset_value)) - goto out; - for (i = 0; i < num_counters; ++i) { if (!reset_value[i]) continue; @@ -158,7 +140,6 @@ static int ppro_check_ctrs(struct pt_regs * const regs, wrmsrl(msrs->counters[i].addr, -reset_value[i]); } -out: /* Only P6 based Pentium M need to re-unmask the apic vector but it * doesn't hurt other P6 variant */ apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED); @@ -179,8 +160,6 @@ static void ppro_start(struct op_msrs const * const msrs) u64 val; int i; - if (!reset_value) - return; for (i = 0; i < num_counters; ++i) { if (reset_value[i]) { rdmsrl(msrs->controls[i].addr, val); @@ -196,8 +175,6 @@ static void ppro_stop(struct op_msrs const * const msrs) u64 val; int i; - if (!reset_value) - return; for (i = 0; i < num_counters; ++i) { if (!reset_value[i]) continue; @@ -242,7 +219,7 @@ static void arch_perfmon_setup_counters(void) eax.split.bit_width = 40; } - num_counters = eax.split.num_counters; + num_counters = min((int)eax.split.num_counters, OP_MAX_COUNTER); op_arch_perfmon_spec.num_counters = num_counters; op_arch_perfmon_spec.num_controls = num_counters; diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h index 89017fa1fd63..71e8a67337e2 100644 --- a/arch/x86/oprofile/op_x86_model.h +++ b/arch/x86/oprofile/op_x86_model.h @@ -43,7 +43,6 @@ struct op_x86_model_spec { int (*fill_in_addresses)(struct op_msrs * const msrs); void (*setup_ctrs)(struct op_x86_model_spec const *model, struct op_msrs const * const msrs); - void (*cpu_down)(void); int (*check_ctrs)(struct pt_regs * const regs, struct op_msrs const * const msrs); void (*start)(struct op_msrs const * const msrs); diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index c95330267f08..404f21a3ff9e 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -43,6 +43,17 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"), }, }, + /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */ + /* 2006 AMD HT/VIA system with two host bridges */ + { + .callback = set_use_crs, + .ident = "ASUS M2V-MX SE", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"), + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + }, + }, {} }; @@ -365,8 +376,13 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) */ if (bus) { struct pci_bus *child; - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child, child->self->pcie_mpss); + list_for_each_entry(child, &bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + + pcie_bus_configure_settings(child, self->pcie_mpss); + } } if (!bus) diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c index 99176094500b..41bd2a2d2c50 100644 --- a/arch/x86/pci/ce4100.c +++ b/arch/x86/pci/ce4100.c @@ -304,7 +304,7 @@ static int ce4100_conf_write(unsigned int seg, unsigned int bus, return pci_direct_conf1.write(seg, bus, devfn, reg, len, value); } -struct pci_raw_ops ce4100_pci_conf = { +static const struct pci_raw_ops ce4100_pci_conf = { .read = ce4100_conf_read, .write = ce4100_conf_write, }; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 92df322e0b57..7962ccb4d9b2 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -33,8 +33,8 @@ int noioapicreroute = 1; int pcibios_last_bus = -1; unsigned long pirq_table_addr; struct pci_bus *pci_root_bus; -struct pci_raw_ops *raw_pci_ops; -struct pci_raw_ops *raw_pci_ext_ops; +const struct pci_raw_ops *__read_mostly raw_pci_ops; +const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 *val) diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 4f2c70439d7f..15460590b8c5 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -79,7 +79,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, #undef PCI_CONF1_ADDRESS -struct pci_raw_ops pci_direct_conf1 = { +const struct pci_raw_ops pci_direct_conf1 = { .read = pci_conf1_read, .write = pci_conf1_write, }; @@ -175,7 +175,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus, #undef PCI_CONF2_ADDRESS -struct pci_raw_ops pci_direct_conf2 = { +static const struct pci_raw_ops pci_direct_conf2 = { .read = pci_conf2_read, .write = pci_conf2_write, }; @@ -191,7 +191,7 @@ struct pci_raw_ops pci_direct_conf2 = { * This should be close to trivial, but it isn't, because there are buggy * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. */ -static int __init pci_sanity_check(struct pci_raw_ops *o) +static int __init pci_sanity_check(const struct pci_raw_ops *o) { u32 x = 0; int year, devfn; diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c index a3d9c54792ae..5372e86834c0 100644 --- a/arch/x86/pci/mmconfig_32.c +++ b/arch/x86/pci/mmconfig_32.c @@ -117,7 +117,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, return 0; } -static struct pci_raw_ops pci_mmcfg = { +static const struct pci_raw_ops pci_mmcfg = { .read = pci_mmcfg_read, .write = pci_mmcfg_write, }; diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c index e783841bd1d7..915a493502cb 100644 --- a/arch/x86/pci/mmconfig_64.c +++ b/arch/x86/pci/mmconfig_64.c @@ -81,7 +81,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, return 0; } -static struct pci_raw_ops pci_mmcfg = { +static const struct pci_raw_ops pci_mmcfg = { .read = pci_mmcfg_read, .write = pci_mmcfg_write, }; diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index 512a88c41501..51abf02f9226 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -110,7 +110,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, #undef PCI_CONF1_MQ_ADDRESS -static struct pci_raw_ops pci_direct_conf1_mq = { +static const struct pci_raw_ops pci_direct_conf1_mq = { .read = pci_conf1_mq_read, .write = pci_conf1_mq_write }; diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c index 5262603b04d9..7043a4f0e98a 100644 --- a/arch/x86/pci/olpc.c +++ b/arch/x86/pci/olpc.c @@ -301,7 +301,7 @@ static int pci_olpc_write(unsigned int seg, unsigned int bus, return 0; } -static struct pci_raw_ops pci_olpc_conf = { +static const struct pci_raw_ops pci_olpc_conf = { .read = pci_olpc_read, .write = pci_olpc_write, }; diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c index f68553551467..db0e9a51e611 100644 --- a/arch/x86/pci/pcbios.c +++ b/arch/x86/pci/pcbios.c @@ -303,7 +303,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus, * Function table for BIOS32 access */ -static struct pci_raw_ops pci_bios_access = { +static const struct pci_raw_ops pci_bios_access = { .read = pci_bios_read, .write = pci_bios_write }; @@ -312,7 +312,7 @@ static struct pci_raw_ops pci_bios_access = { * Try to find PCI BIOS. */ -static struct pci_raw_ops * __devinit pci_find_bios(void) +static const struct pci_raw_ops * __devinit pci_find_bios(void) { union bios32 *check; unsigned char sum; diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 1017c7bee388..492ade8c978e 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -175,8 +175,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) "pcifront-msi-x" : "pcifront-msi", DOMID_SELF); - if (irq < 0) + if (irq < 0) { + ret = irq; goto free; + } i++; } kfree(v); @@ -221,8 +223,10 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) if (msg.data != XEN_PIRQ_MSI_DATA || xen_irq_from_pirq(pirq) < 0) { pirq = xen_allocate_pirq_msi(dev, msidesc); - if (pirq < 0) + if (pirq < 0) { + irq = -ENODEV; goto error; + } xen_msi_compose_msg(dev, pirq, &msg); __write_msi_msg(msidesc, &msg); dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq); @@ -244,10 +248,12 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) error: dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n"); - return -ENODEV; + return irq; } #ifdef CONFIG_XEN_DOM0 +static bool __read_mostly pci_seg_supported = true; + static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) { int ret = 0; @@ -265,10 +271,11 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) memset(&map_irq, 0, sizeof(map_irq)); map_irq.domid = domid; - map_irq.type = MAP_PIRQ_TYPE_MSI; + map_irq.type = MAP_PIRQ_TYPE_MSI_SEG; map_irq.index = -1; map_irq.pirq = -1; - map_irq.bus = dev->bus->number; + map_irq.bus = dev->bus->number | + (pci_domain_nr(dev->bus) << 16); map_irq.devfn = dev->devfn; if (type == PCI_CAP_ID_MSIX) { @@ -285,7 +292,20 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) map_irq.entry_nr = msidesc->msi_attrib.entry_nr; } - ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); + ret = -EINVAL; + if (pci_seg_supported) + ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, + &map_irq); + if (ret == -EINVAL && !pci_domain_nr(dev->bus)) { + map_irq.type = MAP_PIRQ_TYPE_MSI; + map_irq.index = -1; + map_irq.pirq = -1; + map_irq.bus = dev->bus->number; + ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, + &map_irq); + if (ret != -EINVAL) + pci_seg_supported = false; + } if (ret) { dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n", ret, domid); diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 021eee91c056..8d874396cb29 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -1,6 +1,7 @@ # Platform specific code goes here obj-y += ce4100/ obj-y += efi/ +obj-y += geode/ obj-y += iris/ obj-y += mrst/ obj-y += olpc/ diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile new file mode 100644 index 000000000000..07c9cd05021a --- /dev/null +++ b/arch/x86/platform/geode/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ALIX) += alix.o diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c new file mode 100644 index 000000000000..ca1973699d3d --- /dev/null +++ b/arch/x86/platform/geode/alix.c @@ -0,0 +1,142 @@ +/* + * System Specific setup for PCEngines ALIX. + * At the moment this means setup of GPIO control of LEDs + * on Alix.2/3/6 boards. + * + * + * Copyright (C) 2008 Constantin Baranov <const@mimas.ru> + * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com> + * + * TODO: There are large similarities with leds-net5501.c + * by Alessandro Zummo <a.zummo@towertech.it> + * In the future leds-net5501.c should be migrated over to platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/string.h> +#include <linux/module.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/geode.h> + +static int force = 0; +module_param(force, bool, 0444); +/* FIXME: Award bios is not automatically detected as Alix platform */ +MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform"); + +static struct gpio_led alix_leds[] = { + { + .name = "alix:1", + .gpio = 6, + .default_trigger = "default-on", + .active_low = 1, + }, + { + .name = "alix:2", + .gpio = 25, + .default_trigger = "default-off", + .active_low = 1, + }, + { + .name = "alix:3", + .gpio = 27, + .default_trigger = "default-off", + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data alix_leds_data = { + .num_leds = ARRAY_SIZE(alix_leds), + .leds = alix_leds, +}; + +static struct platform_device alix_leds_dev = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &alix_leds_data, +}; + +static void __init register_alix(void) +{ + /* Setup LED control through leds-gpio driver */ + platform_device_register(&alix_leds_dev); +} + +static int __init alix_present(unsigned long bios_phys, + const char *alix_sig, + size_t alix_sig_len) +{ + const size_t bios_len = 0x00010000; + const char *bios_virt; + const char *scan_end; + const char *p; + char name[64]; + + if (force) { + printk(KERN_NOTICE "%s: forced to skip BIOS test, " + "assume system is ALIX.2/ALIX.3\n", + KBUILD_MODNAME); + return 1; + } + + bios_virt = phys_to_virt(bios_phys); + scan_end = bios_virt + bios_len - (alix_sig_len + 2); + for (p = bios_virt; p < scan_end; p++) { + const char *tail; + char *a; + + if (memcmp(p, alix_sig, alix_sig_len) != 0) + continue; + + memcpy(name, p, sizeof(name)); + + /* remove the first \0 character from string */ + a = strchr(name, '\0'); + if (a) + *a = ' '; + + /* cut the string at a newline */ + a = strchr(name, '\r'); + if (a) + *a = '\0'; + + tail = p + alix_sig_len; + if ((tail[0] == '2' || tail[0] == '3')) { + printk(KERN_INFO + "%s: system is recognized as \"%s\"\n", + KBUILD_MODNAME, name); + return 1; + } + } + + return 0; +} + +static int __init alix_init(void) +{ + const char tinybios_sig[] = "PC Engines ALIX."; + const char coreboot_sig[] = "PC Engines\0ALIX."; + + if (!is_geode()) + return 0; + + if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) + register_alix(); + + return 0; +} + +module_init(alix_init); + +MODULE_AUTHOR("Ed Wildgoose <kernel@wildgooses.com>"); +MODULE_DESCRIPTION("PCEngines ALIX System Setup"); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 7000e74b3087..e6379526675b 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -14,6 +14,8 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> #include <linux/sfi.h> #include <linux/intel_pmic_gpio.h> #include <linux/spi/spi.h> @@ -392,6 +394,7 @@ static void __init *max3111_platform_data(void *info) struct spi_board_info *spi_info = info; int intr = get_gpio_by_name("max3111_int"); + spi_info->mode = SPI_MODE_0; if (intr == -1) return NULL; spi_info->irq = intr + MRST_IRQ_OFFSET; @@ -678,36 +681,40 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) pentry = (struct sfi_device_table_entry *)sb->pentry; for (i = 0; i < num; i++, pentry++) { - if (pentry->irq != (u8)0xff) { /* native RTE case */ + int irq = pentry->irq; + + if (irq != (u8)0xff) { /* native RTE case */ /* these SPI2 devices are not exposed to system as PCI * devices, but they have separate RTE entry in IOAPIC * so we have to enable them one by one here */ - ioapic = mp_find_ioapic(pentry->irq); + ioapic = mp_find_ioapic(irq); irq_attr.ioapic = ioapic; - irq_attr.ioapic_pin = pentry->irq; + irq_attr.ioapic_pin = irq; irq_attr.trigger = 1; irq_attr.polarity = 1; - io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr); - } + io_apic_set_pci_routing(NULL, irq, &irq_attr); + } else + irq = 0; /* No irq */ + switch (pentry->type) { case SFI_DEV_TYPE_IPC: /* ID as IRQ is a hack that will go away */ - pdev = platform_device_alloc(pentry->name, pentry->irq); + pdev = platform_device_alloc(pentry->name, irq); if (pdev == NULL) { pr_err("out of memory for SFI platform device '%s'.\n", pentry->name); continue; } - install_irq_resource(pdev, pentry->irq); + install_irq_resource(pdev, irq); pr_debug("info[%2d]: IPC bus, name = %16.16s, " - "irq = 0x%2x\n", i, pentry->name, pentry->irq); + "irq = 0x%2x\n", i, pentry->name, irq); sfi_handle_ipc_dev(pdev); break; case SFI_DEV_TYPE_SPI: memset(&spi_info, 0, sizeof(spi_info)); strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); - spi_info.irq = pentry->irq; + spi_info.irq = irq; spi_info.bus_num = pentry->host_num; spi_info.chip_select = pentry->addr; spi_info.max_speed_hz = pentry->max_freq; @@ -724,7 +731,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) memset(&i2c_info, 0, sizeof(i2c_info)); bus = pentry->host_num; strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); - i2c_info.irq = pentry->irq; + i2c_info.irq = irq; i2c_info.addr = pentry->addr; pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, " "irq = 0x%2x, addr = 0x%x\n", i, bus, diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 73d70d65e76e..6d5dbcdd444a 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -58,8 +58,11 @@ EXPORT_SYMBOL_GPL(vrtc_cmos_write); unsigned long vrtc_get_time(void) { u8 sec, min, hour, mday, mon; + unsigned long flags; u32 year; + spin_lock_irqsave(&rtc_lock, flags); + while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP)) cpu_relax(); @@ -70,6 +73,8 @@ unsigned long vrtc_get_time(void) mon = vrtc_cmos_read(RTC_MONTH); year = vrtc_cmos_read(RTC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); + /* vRTC YEAR reg contains the offset to 1960 */ year += 1960; @@ -83,8 +88,10 @@ unsigned long vrtc_get_time(void) int vrtc_set_mmss(unsigned long nowtime) { int real_sec, real_min; + unsigned long flags; int vrtc_min; + spin_lock_irqsave(&rtc_lock, flags); vrtc_min = vrtc_cmos_read(RTC_MINUTES); real_sec = nowtime % 60; @@ -95,6 +102,8 @@ int vrtc_set_mmss(unsigned long nowtime) vrtc_cmos_write(real_sec, RTC_SECONDS); vrtc_cmos_write(real_min, RTC_MINUTES); + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; } diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c index 8b9940e78e2f..7cce722667b8 100644 --- a/arch/x86/platform/olpc/olpc.c +++ b/arch/x86/platform/olpc/olpc.c @@ -161,13 +161,13 @@ restart: if (inbuf && inlen) { /* write data to EC */ for (i = 0; i < inlen; i++) { + pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]); + outb(inbuf[i], 0x68); if (wait_on_ibf(0x6c, 0)) { printk(KERN_ERR "olpc-ec: timeout waiting for" " EC accept data!\n"); goto err; } - pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]); - outb(inbuf[i], 0x68); } } if (outbuf && outlen) { diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index db8b915f54bc..5b552198f774 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -115,9 +115,6 @@ early_param("nobau", setup_nobau); /* base pnode in this partition */ static int uv_base_pnode __read_mostly; -/* position of pnode (which is nasid>>1): */ -static int uv_nshift __read_mostly; -static unsigned long uv_mmask __read_mostly; static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); @@ -1435,7 +1432,7 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode) { int i; int cpu; - unsigned long pa; + unsigned long gpa; unsigned long m; unsigned long n; size_t dsize; @@ -1451,9 +1448,9 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode) bau_desc = kmalloc_node(dsize, GFP_KERNEL, node); BUG_ON(!bau_desc); - pa = uv_gpa(bau_desc); /* need the real nasid*/ - n = pa >> uv_nshift; - m = pa & uv_mmask; + gpa = uv_gpa(bau_desc); + n = uv_gpa_to_gnode(gpa); + m = uv_gpa_to_offset(gpa); /* the 14-bit pnode */ write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m)); @@ -1525,9 +1522,9 @@ static void pq_init(int node, int pnode) bcp->queue_last = pqp + (DEST_Q_SIZE - 1); } /* - * need the pnode of where the memory was really allocated + * need the gnode of where the memory was really allocated */ - pn = uv_gpa(pqp) >> uv_nshift; + pn = uv_gpa_to_gnode(uv_gpa(pqp)); first = uv_physnodeaddr(pqp); pn_first = ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | first; last = uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1)); @@ -1837,8 +1834,6 @@ static int __init uv_bau_init(void) zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu)); } - uv_nshift = uv_hub_info->m_val; - uv_mmask = (1UL << uv_hub_info->m_val) - 1; nuvhubs = uv_num_possible_blades(); spin_lock_init(&disable_lock); congested_cycles = usec_2_cycles(congested_respns_us); diff --git a/arch/x86/vdso/vdso32/sysenter.S b/arch/x86/vdso/vdso32/sysenter.S index e2800affa754..e354bceee0e0 100644 --- a/arch/x86/vdso/vdso32/sysenter.S +++ b/arch/x86/vdso/vdso32/sysenter.S @@ -43,7 +43,7 @@ __kernel_vsyscall: .space 7,0x90 /* 14: System call restart point is here! (SYSENTER_RETURN-2) */ - jmp .Lenter_kernel + int $0x80 /* 16: System call normal return point is here! */ VDSO32_SYSENTER_RETURN: /* Symbol used by sysenter.c via vdso32-syms.h */ pop %ebp diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 316fbca3490e..153407c35b75 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -89,6 +89,15 @@ static unsigned long vdso_addr(unsigned long start, unsigned len) addr = start + (offset << PAGE_SHIFT); if (addr >= end) addr = end; + + /* + * page-align it here so that get_unmapped_area doesn't + * align it wrongfully again to the next page. addr can come in 4K + * unaligned here as a result of stack start randomization. + */ + addr = PAGE_ALIGN(addr); + addr = align_addr(addr, NULL, ALIGN_VDSO); + return addr; } diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 5cc821cb2e09..26c731a106af 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -25,8 +25,7 @@ config XEN_PRIVILEGED_GUEST config XEN_PVHVM def_bool y - depends on XEN - depends on X86_LOCAL_APIC + depends on XEN && PCI && X86_LOCAL_APIC config XEN_MAX_DOMAIN_MEMORY int @@ -49,11 +48,3 @@ config XEN_DEBUG_FS help Enable statistics output and various tuning options in debugfs. Enabling this option may incur a significant performance overhead. - -config XEN_DEBUG - bool "Enable Xen debug checks" - depends on XEN - default n - help - Enable various WARN_ON checks in the Xen MMU code. - Enabling this option WILL incur a significant performance overhead. diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 2d69617950f7..da8afd576a6b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -251,6 +251,7 @@ static void __init xen_init_cpuid_mask(void) ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ (1 << X86_FEATURE_ACPI)); /* disable ACPI */ ax = 1; + cx = 0; xen_cpuid(&ax, &bx, &cx, &dx); xsave_mask = diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 20a614275064..87f6673b1207 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -495,41 +495,6 @@ static pte_t xen_make_pte(pteval_t pte) } PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte); -#ifdef CONFIG_XEN_DEBUG -pte_t xen_make_pte_debug(pteval_t pte) -{ - phys_addr_t addr = (pte & PTE_PFN_MASK); - phys_addr_t other_addr; - bool io_page = false; - pte_t _pte; - - if (pte & _PAGE_IOMAP) - io_page = true; - - _pte = xen_make_pte(pte); - - if (!addr) - return _pte; - - if (io_page && - (xen_initial_domain() || addr >= ISA_END_ADDRESS)) { - other_addr = pfn_to_mfn(addr >> PAGE_SHIFT) << PAGE_SHIFT; - WARN_ONCE(addr != other_addr, - "0x%lx is using VM_IO, but it is 0x%lx!\n", - (unsigned long)addr, (unsigned long)other_addr); - } else { - pteval_t iomap_set = (_pte.pte & PTE_FLAGS_MASK) & _PAGE_IOMAP; - other_addr = (_pte.pte & PTE_PFN_MASK); - WARN_ONCE((addr == other_addr) && (!io_page) && (!iomap_set), - "0x%lx is missing VM_IO (and wasn't fixed)!\n", - (unsigned long)addr); - } - - return _pte; -} -PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte_debug); -#endif - static pgd_t xen_make_pgd(pgdval_t pgd) { pgd = pte_pfn_to_mfn(pgd); @@ -1721,10 +1686,8 @@ void __init xen_setup_machphys_mapping(void) machine_to_phys_nr = MACH2PHYS_NR_ENTRIES; } #ifdef CONFIG_X86_32 - if ((machine_to_phys_mapping + machine_to_phys_nr) - < machine_to_phys_mapping) - machine_to_phys_nr = (unsigned long *)NULL - - machine_to_phys_mapping; + WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1)) + < machine_to_phys_mapping); #endif } @@ -1994,9 +1957,6 @@ void __init xen_ident_map_ISA(void) static void __init xen_post_allocator_init(void) { -#ifdef CONFIG_XEN_DEBUG - pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug); -#endif pv_mmu_ops.set_pte = xen_set_pte; pv_mmu_ops.set_pmd = xen_set_pmd; pv_mmu_ops.set_pud = xen_set_pud; @@ -2406,17 +2366,3 @@ out: return err; } EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_range); - -#ifdef CONFIG_XEN_DEBUG_FS -static int p2m_dump_open(struct inode *inode, struct file *filp) -{ - return single_open(filp, p2m_dump_show, NULL); -} - -static const struct file_operations p2m_dump_fops = { - .open = p2m_dump_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* CONFIG_XEN_DEBUG_FS */ diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 58efeb9d5440..1b267e75158d 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -161,7 +161,9 @@ #include <asm/xen/page.h> #include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> +#include <xen/grant_table.h> +#include "multicalls.h" #include "xen-ops.h" static void __init m2p_override_init(void); @@ -676,7 +678,8 @@ static unsigned long mfn_hash(unsigned long mfn) } /* Add an MFN override for a particular page */ -int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte) +int m2p_add_override(unsigned long mfn, struct page *page, + struct gnttab_map_grant_ref *kmap_op) { unsigned long flags; unsigned long pfn; @@ -692,16 +695,28 @@ int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte) "m2p_add_override: pfn %lx not mapped", pfn)) return -EINVAL; } - - page->private = mfn; + WARN_ON(PagePrivate(page)); + SetPagePrivate(page); + set_page_private(page, mfn); page->index = pfn_to_mfn(pfn); if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) return -ENOMEM; - if (clear_pte && !PageHighMem(page)) - /* Just zap old mapping for now */ - pte_clear(&init_mm, address, ptep); + if (kmap_op != NULL) { + if (!PageHighMem(page)) { + struct multicall_space mcs = + xen_mc_entry(sizeof(*kmap_op)); + + MULTI_grant_table_op(mcs.mc, + GNTTABOP_map_grant_ref, kmap_op, 1); + + xen_mc_issue(PARAVIRT_LAZY_MMU); + } + /* let's use dev_bus_addr to record the old mfn instead */ + kmap_op->dev_bus_addr = page->index; + page->index = (unsigned long) kmap_op; + } spin_lock_irqsave(&m2p_override_lock, flags); list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); spin_unlock_irqrestore(&m2p_override_lock, flags); @@ -735,13 +750,56 @@ int m2p_remove_override(struct page *page, bool clear_pte) spin_lock_irqsave(&m2p_override_lock, flags); list_del(&page->lru); spin_unlock_irqrestore(&m2p_override_lock, flags); - set_phys_to_machine(pfn, page->index); + WARN_ON(!PagePrivate(page)); + ClearPagePrivate(page); - if (clear_pte && !PageHighMem(page)) - set_pte_at(&init_mm, address, ptep, - pfn_pte(pfn, PAGE_KERNEL)); - /* No tlb flush necessary because the caller already - * left the pte unmapped. */ + if (clear_pte) { + struct gnttab_map_grant_ref *map_op = + (struct gnttab_map_grant_ref *) page->index; + set_phys_to_machine(pfn, map_op->dev_bus_addr); + if (!PageHighMem(page)) { + struct multicall_space mcs; + struct gnttab_unmap_grant_ref *unmap_op; + + /* + * It might be that we queued all the m2p grant table + * hypercalls in a multicall, then m2p_remove_override + * get called before the multicall has actually been + * issued. In this case handle is going to -1 because + * it hasn't been modified yet. + */ + if (map_op->handle == -1) + xen_mc_flush(); + /* + * Now if map_op->handle is negative it means that the + * hypercall actually returned an error. + */ + if (map_op->handle == GNTST_general_error) { + printk(KERN_WARNING "m2p_remove_override: " + "pfn %lx mfn %lx, failed to modify kernel mappings", + pfn, mfn); + return -1; + } + + mcs = xen_mc_entry( + sizeof(struct gnttab_unmap_grant_ref)); + unmap_op = mcs.args; + unmap_op->host_addr = map_op->host_addr; + unmap_op->handle = map_op->handle; + unmap_op->dev_bus_addr = 0; + + MULTI_grant_table_op(mcs.mc, + GNTTABOP_unmap_grant_ref, unmap_op, 1); + + xen_mc_issue(PARAVIRT_LAZY_MMU); + + set_pte_at(&init_mm, address, ptep, + pfn_pte(pfn, PAGE_KERNEL)); + __flush_tlb_single(address); + map_op->host_addr = 0; + } + } else + set_phys_to_machine(pfn, page->index); return 0; } @@ -758,7 +816,7 @@ struct page *m2p_find_override(unsigned long mfn) spin_lock_irqsave(&m2p_override_lock, flags); list_for_each_entry(p, bucket, lru) { - if (p->private == mfn) { + if (page_private(p) == mfn) { ret = p; break; } @@ -782,17 +840,21 @@ unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn) EXPORT_SYMBOL_GPL(m2p_find_override_pfn); #ifdef CONFIG_XEN_DEBUG_FS - -int p2m_dump_show(struct seq_file *m, void *v) +#include <linux/debugfs.h> +#include "debugfs.h" +static int p2m_dump_show(struct seq_file *m, void *v) { static const char * const level_name[] = { "top", "middle", - "entry", "abnormal" }; - static const char * const type_name[] = { "identity", "missing", - "pfn", "abnormal"}; + "entry", "abnormal", "error"}; #define TYPE_IDENTITY 0 #define TYPE_MISSING 1 #define TYPE_PFN 2 #define TYPE_UNKNOWN 3 + static const char * const type_name[] = { + [TYPE_IDENTITY] = "identity", + [TYPE_MISSING] = "missing", + [TYPE_PFN] = "pfn", + [TYPE_UNKNOWN] = "abnormal"}; unsigned long pfn, prev_pfn_type = 0, prev_pfn_level = 0; unsigned int uninitialized_var(prev_level); unsigned int uninitialized_var(prev_type); @@ -856,4 +918,32 @@ int p2m_dump_show(struct seq_file *m, void *v) #undef TYPE_PFN #undef TYPE_UNKNOWN } -#endif + +static int p2m_dump_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, p2m_dump_show, NULL); +} + +static const struct file_operations p2m_dump_fops = { + .open = p2m_dump_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *d_mmu_debug; + +static int __init xen_p2m_debugfs(void) +{ + struct dentry *d_xen = xen_init_debugfs(); + + if (d_xen == NULL) + return -ENOMEM; + + d_mmu_debug = debugfs_create_dir("mmu", d_xen); + + debugfs_create_file("p2m", 0600, d_mmu_debug, NULL, &p2m_dump_fops); + return 0; +} +fs_initcall(xen_p2m_debugfs); +#endif /* CONFIG_XEN_DEBUG_FS */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index df118a825f39..38d0af4fefec 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -37,7 +37,10 @@ extern void xen_syscall_target(void); extern void xen_syscall32_target(void); /* Amount of extra memory space we add to the e820 ranges */ -phys_addr_t xen_extra_mem_start, xen_extra_mem_size; +struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata; + +/* Number of pages released from the initial allocation. */ +unsigned long xen_released_pages; /* * The maximum amount of extra memory compared to the base size. The @@ -51,48 +54,47 @@ phys_addr_t xen_extra_mem_start, xen_extra_mem_size; */ #define EXTRA_MEM_RATIO (10) -static void __init xen_add_extra_mem(unsigned long pages) +static void __init xen_add_extra_mem(u64 start, u64 size) { unsigned long pfn; + int i; - u64 size = (u64)pages * PAGE_SIZE; - u64 extra_start = xen_extra_mem_start + xen_extra_mem_size; - - if (!pages) - return; - - e820_add_region(extra_start, size, E820_RAM); - sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - - memblock_x86_reserve_range(extra_start, extra_start + size, "XEN EXTRA"); + for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) { + /* Add new region. */ + if (xen_extra_mem[i].size == 0) { + xen_extra_mem[i].start = start; + xen_extra_mem[i].size = size; + break; + } + /* Append to existing region. */ + if (xen_extra_mem[i].start + xen_extra_mem[i].size == start) { + xen_extra_mem[i].size += size; + break; + } + } + if (i == XEN_EXTRA_MEM_MAX_REGIONS) + printk(KERN_WARNING "Warning: not enough extra memory regions\n"); - xen_extra_mem_size += size; + memblock_x86_reserve_range(start, start + size, "XEN EXTRA"); - xen_max_p2m_pfn = PFN_DOWN(extra_start + size); + xen_max_p2m_pfn = PFN_DOWN(start + size); - for (pfn = PFN_DOWN(extra_start); pfn <= xen_max_p2m_pfn; pfn++) + for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); } -static unsigned long __init xen_release_chunk(phys_addr_t start_addr, - phys_addr_t end_addr) +static unsigned long __init xen_release_chunk(unsigned long start, + unsigned long end) { struct xen_memory_reservation reservation = { .address_bits = 0, .extent_order = 0, .domid = DOMID_SELF }; - unsigned long start, end; unsigned long len = 0; unsigned long pfn; int ret; - start = PFN_UP(start_addr); - end = PFN_DOWN(end_addr); - - if (end <= start) - return 0; - for(pfn = start; pfn < end; pfn++) { unsigned long mfn = pfn_to_mfn(pfn); @@ -117,88 +119,92 @@ static unsigned long __init xen_release_chunk(phys_addr_t start_addr, return len; } -static unsigned long __init xen_return_unused_memory(unsigned long max_pfn, - const struct e820map *e820) +static unsigned long __init xen_set_identity_and_release( + const struct e820entry *list, size_t map_size, unsigned long nr_pages) { - phys_addr_t max_addr = PFN_PHYS(max_pfn); - phys_addr_t last_end = ISA_END_ADDRESS; + phys_addr_t start = 0; unsigned long released = 0; + unsigned long identity = 0; + const struct e820entry *entry; int i; - /* Free any unused memory above the low 1Mbyte. */ - for (i = 0; i < e820->nr_map && last_end < max_addr; i++) { - phys_addr_t end = e820->map[i].addr; - end = min(max_addr, end); + /* + * Combine non-RAM regions and gaps until a RAM region (or the + * end of the map) is reached, then set the 1:1 map and + * release the pages (if available) in those non-RAM regions. + * + * The combined non-RAM regions are rounded to a whole number + * of pages so any partial pages are accessible via the 1:1 + * mapping. This is needed for some BIOSes that put (for + * example) the DMI tables in a reserved region that begins on + * a non-page boundary. + */ + for (i = 0, entry = list; i < map_size; i++, entry++) { + phys_addr_t end = entry->addr + entry->size; + + if (entry->type == E820_RAM || i == map_size - 1) { + unsigned long start_pfn = PFN_DOWN(start); + unsigned long end_pfn = PFN_UP(end); - if (last_end < end) - released += xen_release_chunk(last_end, end); - last_end = max(last_end, e820->map[i].addr + e820->map[i].size); + if (entry->type == E820_RAM) + end_pfn = PFN_UP(entry->addr); + + if (start_pfn < end_pfn) { + if (start_pfn < nr_pages) + released += xen_release_chunk( + start_pfn, min(end_pfn, nr_pages)); + + identity += set_phys_range_identity( + start_pfn, end_pfn); + } + start = end; + } } - if (last_end < max_addr) - released += xen_release_chunk(last_end, max_addr); + printk(KERN_INFO "Released %lu pages of unused memory\n", released); + printk(KERN_INFO "Set %ld page(s) to 1-1 mapping\n", identity); - printk(KERN_INFO "released %lu pages of unused memory\n", released); return released; } -static unsigned long __init xen_set_identity(const struct e820entry *list, - ssize_t map_size) +static unsigned long __init xen_get_max_pages(void) { - phys_addr_t last = xen_initial_domain() ? 0 : ISA_END_ADDRESS; - phys_addr_t start_pci = last; - const struct e820entry *entry; - unsigned long identity = 0; - int i; - - for (i = 0, entry = list; i < map_size; i++, entry++) { - phys_addr_t start = entry->addr; - phys_addr_t end = start + entry->size; - - if (start < last) - start = last; - - if (end <= start) - continue; + unsigned long max_pages = MAX_DOMAIN_PAGES; + domid_t domid = DOMID_SELF; + int ret; - /* Skip over the 1MB region. */ - if (last > end) - continue; + ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); + if (ret > 0) + max_pages = ret; + return min(max_pages, MAX_DOMAIN_PAGES); +} - if ((entry->type == E820_RAM) || (entry->type == E820_UNUSABLE)) { - if (start > start_pci) - identity += set_phys_range_identity( - PFN_UP(start_pci), PFN_DOWN(start)); +static void xen_align_and_add_e820_region(u64 start, u64 size, int type) +{ + u64 end = start + size; - /* Without saving 'last' we would gooble RAM too - * at the end of the loop. */ - last = end; - start_pci = end; - continue; - } - start_pci = min(start, start_pci); - last = end; + /* Align RAM regions to page boundaries. */ + if (type == E820_RAM) { + start = PAGE_ALIGN(start); + end &= ~((u64)PAGE_SIZE - 1); } - if (last > start_pci) - identity += set_phys_range_identity( - PFN_UP(start_pci), PFN_DOWN(last)); - return identity; + + e820_add_region(start, end - start, type); } + /** * machine_specific_memory_setup - Hook for machine specific memory setup. **/ char * __init xen_memory_setup(void) { static struct e820entry map[E820MAX] __initdata; - static struct e820entry map_raw[E820MAX] __initdata; unsigned long max_pfn = xen_start_info->nr_pages; unsigned long long mem_end; int rc; struct xen_memory_map memmap; + unsigned long max_pages; unsigned long extra_pages = 0; - unsigned long extra_limit; - unsigned long identity_pages = 0; int i; int op; @@ -224,58 +230,65 @@ char * __init xen_memory_setup(void) } BUG_ON(rc); - memcpy(map_raw, map, sizeof(map)); - e820.nr_map = 0; - xen_extra_mem_start = mem_end; - for (i = 0; i < memmap.nr_entries; i++) { - unsigned long long end; - - /* Guard against non-page aligned E820 entries. */ - if (map[i].type == E820_RAM) - map[i].size -= (map[i].size + map[i].addr) % PAGE_SIZE; - - end = map[i].addr + map[i].size; - if (map[i].type == E820_RAM && end > mem_end) { - /* RAM off the end - may be partially included */ - u64 delta = min(map[i].size, end - mem_end); - - map[i].size -= delta; - end -= delta; - - extra_pages += PFN_DOWN(delta); - /* - * Set RAM below 4GB that is not for us to be unusable. - * This prevents "System RAM" address space from being - * used as potential resource for I/O address (happens - * when 'allocate_resource' is called). - */ - if (delta && - (xen_initial_domain() && end < 0x100000000ULL)) - e820_add_region(end, delta, E820_UNUSABLE); + /* Make sure the Xen-supplied memory map is well-ordered. */ + sanitize_e820_map(map, memmap.nr_entries, &memmap.nr_entries); + + max_pages = xen_get_max_pages(); + if (max_pages > max_pfn) + extra_pages += max_pages - max_pfn; + + /* + * Set P2M for all non-RAM pages and E820 gaps to be identity + * type PFNs. Any RAM pages that would be made inaccesible by + * this are first released. + */ + xen_released_pages = xen_set_identity_and_release( + map, memmap.nr_entries, max_pfn); + extra_pages += xen_released_pages; + + /* + * Clamp the amount of extra memory to a EXTRA_MEM_RATIO + * factor the base size. On non-highmem systems, the base + * size is the full initial memory allocation; on highmem it + * is limited to the max size of lowmem, so that it doesn't + * get completely filled. + * + * In principle there could be a problem in lowmem systems if + * the initial memory is also very large with respect to + * lowmem, but we won't try to deal with that here. + */ + extra_pages = min(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)), + extra_pages); + + i = 0; + while (i < memmap.nr_entries) { + u64 addr = map[i].addr; + u64 size = map[i].size; + u32 type = map[i].type; + + if (type == E820_RAM) { + if (addr < mem_end) { + size = min(size, mem_end - addr); + } else if (extra_pages) { + size = min(size, (u64)extra_pages * PAGE_SIZE); + extra_pages -= size / PAGE_SIZE; + xen_add_extra_mem(addr, size); + } else + type = E820_UNUSABLE; } - if (map[i].size > 0 && end > xen_extra_mem_start) - xen_extra_mem_start = end; + xen_align_and_add_e820_region(addr, size, type); - /* Add region if any remains */ - if (map[i].size > 0) - e820_add_region(map[i].addr, map[i].size, map[i].type); + map[i].addr += size; + map[i].size -= size; + if (map[i].size == 0) + i++; } - /* Align the balloon area so that max_low_pfn does not get set - * to be at the _end_ of the PCI gap at the far end (fee01000). - * Note that xen_extra_mem_start gets set in the loop above to be - * past the last E820 region. */ - if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32))) - xen_extra_mem_start = (1ULL<<32); /* * In domU, the ISA region is normal, usable memory, but we * reserve ISA memory anyway because too many things poke * about in there. - * - * In Dom0, the host E820 information can leave gaps in the - * ISA range, which would cause us to release those pages. To - * avoid this, we unconditionally reserve them here. */ e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS, E820_RESERVED); @@ -292,36 +305,6 @@ char * __init xen_memory_setup(void) sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820); - - /* - * Clamp the amount of extra memory to a EXTRA_MEM_RATIO - * factor the base size. On non-highmem systems, the base - * size is the full initial memory allocation; on highmem it - * is limited to the max size of lowmem, so that it doesn't - * get completely filled. - * - * In principle there could be a problem in lowmem systems if - * the initial memory is also very large with respect to - * lowmem, but we won't try to deal with that here. - */ - extra_limit = min(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)), - max_pfn + extra_pages); - - if (extra_limit >= max_pfn) - extra_pages = extra_limit - max_pfn; - else - extra_pages = 0; - - xen_add_extra_mem(extra_pages); - - /* - * Set P2M for all non-RAM pages and E820 gaps to be identity - * type PFNs. We supply it with the non-sanitized version - * of the E820. - */ - identity_pages = xen_set_identity(map_raw, memmap.nr_entries); - printk(KERN_INFO "Set %ld page(s) to 1-1 mapping.\n", identity_pages); return "Xen"; } diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index e79dbb95482b..041d4fe9dfe4 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -32,6 +32,7 @@ #include <xen/page.h> #include <xen/events.h> +#include <xen/hvc-console.h> #include "xen-ops.h" #include "mmu.h" @@ -207,6 +208,15 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) unsigned cpu; unsigned int i; + if (skip_ioapic_setup) { + char *m = (max_cpus == 0) ? + "The nosmp parameter is incompatible with Xen; " \ + "use Xen dom0_max_vcpus=1 parameter" : + "The noapic parameter is incompatible with Xen"; + + xen_raw_printk(m); + panic(m); + } xen_init_lock_cpu(0); smp_store_cpu_info(0); @@ -522,7 +532,6 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus) WARN_ON(xen_smp_intr_init(0)); xen_init_lock_cpu(0); - xen_init_spinlocks(); } static int __cpuinit xen_hvm_cpu_up(unsigned int cpu) diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 5158c505bef9..163b4679556e 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -168,9 +168,10 @@ cycle_t xen_clocksource_read(void) struct pvclock_vcpu_time_info *src; cycle_t ret; - src = &get_cpu_var(xen_vcpu)->time; + preempt_disable_notrace(); + src = &__get_cpu_var(xen_vcpu)->time; ret = pvclock_clocksource_read(src); - put_cpu_var(xen_vcpu); + preempt_enable_notrace(); return ret; } diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S index 22a2093b5862..b040b0e518ca 100644 --- a/arch/x86/xen/xen-asm_32.S +++ b/arch/x86/xen/xen-asm_32.S @@ -113,11 +113,13 @@ xen_iret_start_crit: /* * If there's something pending, mask events again so we can - * jump back into xen_hypervisor_callback + * jump back into xen_hypervisor_callback. Otherwise do not + * touch XEN_vcpu_info_mask. */ - sete XEN_vcpu_info_mask(%eax) + jne 1f + movb $1, XEN_vcpu_info_mask(%eax) - popl %eax +1: popl %eax /* * From this point on the registers are restored and the stack diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index 0234cd198c54..f932b30b47fb 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -15,7 +15,6 @@ CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y CONFIG_HZ=100 -CONFIG_GENERIC_TIME=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index 4891abbf16bc..550e8ed5b5c6 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -15,7 +15,6 @@ CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y CONFIG_HZ=100 -CONFIG_GENERIC_TIME=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index a6f934f37f1a..798ee6d285a1 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -455,7 +455,7 @@ __SYSCALL(203, sys_reboot, 3) #define __NR_quotactl 204 __SYSCALL(204, sys_quotactl, 4) #define __NR_nfsservctl 205 -__SYSCALL(205, sys_nfsservctl, 3) +__SYSCALL(205, sys_ni_syscall, 0) #define __NR__sysctl 206 __SYSCALL(206, sys_sysctl, 1) #define __NR_bdflush 207 diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index f717e20d961b..7dde24456427 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -633,7 +633,7 @@ static const struct net_device_ops iss_netdev_ops = { .ndo_set_mac_address = iss_net_set_mac, //.ndo_do_ioctl = iss_net_ioctl, .ndo_tx_timeout = iss_net_tx_timeout, - .ndo_set_multicast_list = iss_net_set_multicast_list, + .ndo_set_rx_mode = iss_net_set_multicast_list, }; static int iss_net_configure(int index, char *init) |